MINI COMPONENT SYSTEM
SISTEMA MINI
MODEL
MODELO
CD-DH790N
OPERATION MANUAL
MANUAL DE MANEJO
ENT SYSTEM
MINI COMPON
CD-DH790
FUNCTION
POWER
ON/STAND-BY
VOL
PUSH
OPEN
CD
USB
AUDIO IN
PHONES
TAPE
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
ENGLISH
Please refer to pages i to ii and E-1 to E-21.
ESPAÑOL
Consulte las páginas i a ii y S-1 a S-21.
SHARP CORPORATION
Downloaded From Disc-Player.com Sharp Manuals
ENGLISH
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
CD-DH790N Mini Component System consisting of CD-DH790N (main unit) and CP-DH790N (speaker system).
Special Note
Supply of this product does not convey a license nor imply
any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial,
satellite, cable and/or other distribution channels),
revenue-generating streaming applications (via Internet,
intranets and/or other networks), other revenue-generating
content distribution systems (pay-audio or audio-ondemand applications and the like) or on revenuegenerating physical media (compact discs, digital versatile
discs, semiconductor chips, hard drives, memory cards
and the like). An independent license for such use is
required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
ENERGY STAR® Program Information
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
superior energy efficiency.
ENERGY STAR® is a U.S. registered mark.
Accessories
Please confirm that the following accessories are included.
CDUSB
TAPE
Remote control x 1
RRMCGA205AWSA
AM loop antenna x 1
QANTLA004AWSA
Downloaded From Disc-Player.com Sharp Manuals
E-1
FM antenna x 1
FANT1535A
CONTENTS
Page
Page
General Information
Radio
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . 3 - 4
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Preparation for Use
Tape Playback
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Advanced Features
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting the clock (Remote control only) . . . . . . . . . . . . . 7
Listening to a cassette tape . . . . . . . . . . . . . . . . . . . . 16
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 17 - 18
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 19
iPod
References
Listening to the iPod . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . 19 - 20
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . 9 - 10
Advanced CD or MP3/WMA disc playback . . . . . . 10 - 11
MP3/WMA folder mode (only for MP3/WMA files) . . . . 12
USB
Listening to USB mass storage
device/MP3 player. . . . . . . . . . . . . . . . . . . . . . . . . 13 - 14
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 14
Precautions
■
General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
(4") 10 cm of free space along the sides, top and back
of the equipment.
(4") 10 cm (4") 10 cm
(4") 10 cm
MINI COMPONENT S YSTEM
CD-DH790
POWER
ON/STAND-BY
FUNCTION
VOL
PUSH
OPEN
AUDIO IN
PHONES
(4") 10 cm
● Use the unit on a firm, level surface free from vibration.
● Place the speakers at least 12" (30 cm) away from any
CRT TV to avoid color variations across the TV screen.
If the variations persist, move the speakers further
away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than 140˚F (60˚C) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power cord from the AC outlet. Plug the AC power
cord back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing it
from the AC outlet, as pulling the cord can damage
internal wires.
Downloaded From Disc-Player.com Sharp Manuals
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental
aspects of battery disposal.
● This unit should only be used within the range of 41˚F 95˚F (5˚C - 35˚C).
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high
volumes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
E-2
Controls and indicators
1
■
2
M INI CO M PO NENT SY S T EM
CD-DH790
3
4
9
FUNCTION
POWER
ON/STAND-BY
5
10
11
VOL
12
13
PUSH
OPEN
AUDIO IN
6
7
8
14
Front panel
Page
1. iPod Docking Station. . . . . . . . . . . . . . . . . . . . . . . 8
2. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. Power On/Stand-by Button . . . . . . . . . . 6, 8, 10, 17
6. Audio In Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . 19
8. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10. FUNCTION Button . . . . . . . . . . . . . . . . . . . 9, 10, 13
11. Disc / USB / iPod Play or Pause / Tape Play /
Tuning Up Button. . . . . . . . . . . . . . . . . . . . 9, 10, 13
12. Disc / USB / Tape Stop /
Tuning Down Button . . . . . . . . . . . . . . . . . 9, 10, 13
13. Disc Tray Open / Close Button . . . . . . . . . . . . . . 10
14. Cassette Compartment . . . . . . . . . . . . . . . . . . . . 16
PHONES
■
1
2
3
13
4
8 9 10
7
15
Page
1. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . 12
2. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . 12
3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6. Once Timer Play Indicator. . . . . . . . . . . . . . . . . . 18
7. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . 12
8. Daily Timer Play Indicator . . . . . . . . . . . . . . . . . . 18
9. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . 15
10. FM Stereo Receiving Indicator . . . . . . . . . . . . . . 15
11. Tape play Indicator . . . . . . . . . . . . . . . . . . . . . . . 10
12. Memory Indicator. . . . . . . . . . . . . . . . . . . . . . 11, 17
13. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . 6
14. Disc/USB Repeat Play Indicator . . . . . . . . . . . . . 10
15. Disc/USB Pause Indicator. . . . . . . . . . . . . . . . . . 10
16. Disc/USB Play Indicator . . . . . . . . . . . . . . . . . . . 10
5 6
14
11
16
12
Downloaded From Disc-Player.com Sharp Manuals
Display
E-3
Controls and indicators (continued)
■
1
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 6
2. On/Stand-by Button. . . . . . . . . . . . . . . 6, 7, 8, 9, 17
3. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . 10
4. Play Mode Button . . . . . . . . . . . . . . . . . . 10, 11, 14
5. iPod Display (TV OUT) Button . . . . . . . . . . . . . . . 5
6. Disc/USB Stop Button . . . . . . . . . . . . . . . . . . 10, 13
7. Disc/USB Display Button . . . . . . . . . . . . . . . 12, 13
8. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . 6
9. Volume Up or Down Buttons . . . . . . . . . . . . . . . . 6
10. Memory Button . . . . . . . . . . . . . . . . . . 7, 10, 15, 17
11. Clear/Dimmer Button. . . . . . . . . . . . . . . . . . . . 6, 11
12. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
13. Tuning Up, iPod Cursor Up Button. . . . . 12, 13, 15
14. CD Track Down or Fast Reverse, Time Down
Button . . . . . . . . . . . . . . . . . . . . . . . 7, 9, 10, 13, 17
15. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 11
16. Tuning Down, iPod Cursor Down
Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13, 15
17. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
18. iPod Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
19. Disc Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20. USB Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. Audio In Button . . . . . . . . . . . . . . . . . . . . . . . . . . 19
22. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 10
23. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . 8, 9
24. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . 8, 9
25. Disc/USB Play/Pause Button . . . . . . . . . . 9, 10, 13
26. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
27. Equaliser Mode Button . . . . . . . . . . . . . . . . . . . . . 6
28. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . 7, 17
29. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
30. Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . 15
31. CD Track Up or Fast Forward, Time Up
Button . . . . . . . . . . . . . . . . . . . . . . . . 7, 9, 10, 13, 17
32. Tuner Preset Down Button . . . . . . . . . . . . . . . . . 15
33. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
34. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . 16
35. Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . 16
36. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . 15
22
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
25
26
27
28
29
30
CD
USB
Remote control
31
32
TAPE
33
34
35
36
■
Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
1
3
2
4
Downloaded From Disc-Player.com Sharp Manuals
E-4
System connections
Make sure to unplug the AC power cord before making any connections.
TV
AM loop antenna
Installing the AM loop
antenna
< Assembling >
To video input
jack
Video cable
(not supplied)
< Attaching to the wall >
wall
screws
(not supplied)
Left
speaker
FM antenna
Right speaker
Red
Black
AC outlet
(AC 120 V ~ 60 Hz)
■
Antenna connection
■
Demonstration mode
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS jack and position the
FM antenna wire in the direction where the strongest signal can be
received.
Outdoor FM antenna:
Use an outdoor FM antenna (75 ohms coaxial cable) for better reception.
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM and GND terminals. Position the
AM loop antenna for optimum reception. Place the AM loop antenna on
a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the antenna on the unit or near the AC power cord may cause
noise pickup. Place the antenna away from the unit for better reception.
● The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll.
● To cancel the demonstration mode, press the DEMO button (remote
control) during power stand-by mode. The unit will enter the low
power consumption mode.
● To return to the demonstration mode, press the DEMO button again.
■
Note:
Please make sure to set iPod unit to either NTSC or PAL to match your
TV signal. Please visit Apple’s homepage for further information.
Speaker connection
● Connect the black wire to the minus
(–) terminal, and the red wire to the
plus (+) terminal.
● Use speakers with an impedance of 4
ohms or more, as lower impedance
speakers can damage the unit.
● Do not mistake the right and the left
channels. The right speaker is the one
on the right side when you face the
unit.
● Do not let the bare speaker wires
Incorrect
touch each other.
● Do not allow any objects to fall into or to be placed in the bass reflex
ducts.
● Do not stand or sit on the speakers. You may be injured.
Downloaded From Disc-Player.com Sharp Manuals
■
Connecting iPod to a TV
The iPod with photo and video can be viewed by connecting to a TV/
monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack on
the rear of the unit.
■
AC power connection
After checking all the connections have been made correctly, plug the AC
power cord of this unit into the AC outlet. If you plug in the unit first, the
unit will enter the stand-by mode.
Note:
Unplug the AC power cord from the AC outlet if the unit will not be in use
for a prolonged period of time.
E-5
Remote control
General control
■ Battery installation
1 Open the battery cover.
2 Insert the batteries according to the direction indicated in the battery
M I NI CO M P O NE NT S Y S T E M
CD-DH790
POWER
ON/STAND-BY
compartment.
When inserting or removing the batteries, push them toward the (–) battery
terminals.
3 Close the cover.
FUNCTION
POWER
ON/STAND-BY
VOL
CD
USB
Caution:
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be used for a long period of time.
This will prevent potential damage due to battery leakage.
● Do not use rechargeable batteries (nickel-cadmium battery, etc.).
● Installing the batteries incorrectly may cause the unit to malfunction.
● Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Notes concerning use:
● Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 “AAA” size batteries (UM/SUM-3,
R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control and the sensor on
the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this occurs.
● Keep the remote control away from moisture, heat, shock, and vibrations.
■
■
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
■
Display brightness control
To dim the display brightness, hold down the CLEAR/DIMMER button on the
remote control for 2 seconds or more.
■
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher, the
volume starts at 16 and fades in to the last set level.
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the unit. The remote
control can be used within the range shown below:
■
■
M I N I C OM PON E N T S Y S T E M
Volume control
Turn the volume knob toward VOL +/– (on main unit) or press VOLUME +/–
(on remote control) to increase or decrease the volume.
Remote sensor
X-Bass control
When the power is first turned on, the unit will enter the extra bass mode which
emphasizes the bass frequencies, and “X-BASS” will appear. To cancel the
extra bass mode, press the X-BASS button on the remote control.
CD-DH790
POWER
ON/STAND-BY
To turn the power on
Press the ON/STAND-BY button to turn the power on.
FUNCTION
VOL
8" - 20'
(0.2 m - 6 m)
PUSH
OPEN
■ Bass control
1 Press the BASS/TREBLE button to select “BASS”.
2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the bass.
AUDIO IN
PHONES
■ Treble control
1 Press the BASS/TREBLE button to select “TREBLE”.
2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the treble.
■
Equalizer
When the EQUALIZER MODE button is pressed, the current mode setting will
be displayed. To change to a different mode, press the EQUALIZER MODE
button repeatedly until the desired sound mode appears.
FLAT
No
No equalization.
equalisation.
GAME
For rock
game.music.
For
For classical
classical music.
music.
CLASSIC For
POPS
For pop
pop music.
For
music.
VOCAL
Vocals are
Vocals
areenhanced.
enhanced.
JAZZ
Downloaded From Disc-Player.com Sharp Manuals
E-6
For jazz.
jazz.
For
Setting the clock (Remote control
only)
Listening to the iPod
Supported iPod models:
● iPod nano (software 1.2 above)
● iPod mini (software 1.2 above)
● iPod (5th generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
● iPod (4th generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
● iPod nano (2nd generation) (software 1.0.0 above)
● iPod nano (3rd generation) (software 1.0.3 above)
● iPod nano (4th generation) (software 1.0.3 above)
● iPod classic (software 1.0.3 above)
● iPod touch (software 1.1 above)
● iPod touch (2nd generation) (software 2.1 above)
CD
USB
TAPE
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
In this example, the clock is set for the 24-hour (0:00)
display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the MEMORY button.
Notes:
● Once the iPod is connected to the unit it will begin
charging.
● The iPod unit cannot be charged while the main unit is
in the stand-by mode or during USB mode.
Auto power on function:
When you press any of the following buttons, the unit turns
on.
● iPod button on the remote control: The unit turns on
and the iPod function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function will start (iPod, CD,
TUNER, USB, TAPE, AUDIO IN).
Press the
or
button to select 24-hour or
12-hour display and then press the MEMORY button.
The 24-hour display will appear.
“0:00”
(0:00 - 23:59)
The 12-hour display will appear.
“AM 12:00”
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
“AM 0:00”
(AM 0:00 - PM 11:59)
4 To adjust the hour, press the
or
button and
then press the MEMORY button. Press the
or
button once to advance the time by 1 hour. Hold it
down to advance continuously.
5 To adjust the minutes, press the
or
button and
then press the MEMORY button. Press the
or
button once to advance the time by 1 minute.
■
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 10 seconds.
Notes:
● iPhone is not supported by this system.
● You can use an audio cable to connect your iPod to the
AUDIO IN jack if:
1. your iPod adaptor does not fit into the iPod dock on
the main unit.
2. you have an iPod that does not have an iPod
adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
Note:
The “CLOCK” will appear or time will be displayed when
the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as
follows.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “CLOCK”
does not appear in step 2, step 3 (for selecting the 24-hour
or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programed contents. [Refer to “Factory
reset, clearing all memory” on page 20 for details.]
2 Perform “Setting the clock” from step 1 onwards.
Downloaded From Disc-Player.com Sharp Manuals
iPod adaptor connection
E-7
Listening to the iPod (continued)
■
To insert iPod adaptor
1 Press the ON/STAND-BY button to turn the power on.
2 Insert the iPod adaptor into the iPod dock and connect
M I NI CO M P O NE NT S Y S T E M
CD-DH790
POWER
ON/STAND-BY
your iPod.
FUNCTION
POWER
ON/STAND-BY
iPod (bottom)
VOL
iPod
Dock connector
CD
USB
iPod adaptor
(not supplied)
TAPE
iPod dock
iPod connector
■
iPod playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button on the remote control or
FUNCTION button repeatedly on the main unit to
select iPod function.
3 Insert iPod unit in iPod dock of main unit.
4 Press the / button to start playback.
■
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do
so even during playback.
■
Navigating the iPod menus
1 Press the MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
or ) button on the remote
control to select an item on the menu and then press
ENTER button.
2 Use the TUNING (
Note:
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit. The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
iPod operation:
The operations described below depend on the generation
iPod you are using.
System on operation:
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function/exclude USB function).
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to stand-by mode.
Downloaded From Disc-Player.com Sharp Manuals
E-8
Listening to the iPod (continued)
■
Listening to a CD or MP3/WMA disc
Watching videos on a TV connected to
iPod
1 Press the DISPLAY (TV OUT) button for more than 2 seconds.
M I NI CO M P O NE NT S Y S T E M
CD-DH790
“TV DISP” will appear on display.
2 Press the ENTER button to start playback.
Notes:
● If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when
ENTER key is pressed.
● To return to watching video on iPod screen, press the MENU
button to enter video menu. Then press the DISPLAY (TV
OUT) button for more than 2 seconds until “iPodDISP”
appears.
● During iPod video playback, pressing the DISPLAY (TV OUT)
button will not toggle video out display between iPod and TV.
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main unit
will automatically change to iPod function overriding the previous
function selected.
Caution:
● Unplug all accessories for the iPod before inserting it into the
iPod dock.
● Stop button ( ) at main unit is invalid during iPod function.
■
POWER
ON/STAND-BY
FUNCTION
POWER
ON/STAND-BY
VOL
CD
USB
TAPE
Various iPod functions
Function
Main
unit
Remote
control
Operation
Play
Press in the pause mode.
Pause
Press in the playback
mode.
Track up/
down
____
Fast
forward/
reverse
____
Display
____
Repeat
____
Shuffle
____
Press and hold down to
toggle shuffle mode.
iPod
Menu
____
Press to view the iPod
menu during iPod function.
iPod
Enter
____
Press to confirm the
selection.
iPod
Cursor
Up/Down
____
Press in the playback or
pause mode.
If you press the button in
the pause mode, press the
/ button to start the
desired track.
Press and hold down in the
playback mode.
Release the button to
resume playback.
iPod back light ON.
Press for more than 2
seconds to toggle the video
out display between iPod or
TV.
Press to toggle repeat
mode.
Press to select the iPod
menu.
Downloaded From Disc-Player.com Sharp Manuals
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio code
which is processed by significant compression from the
original audio source with very little loss in sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display may
differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
● “MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
● CD button on the remote control: The unit turns on and the
“CD” function is activated.
●
/ button on the main unit: The unit turns on and playback
of the last function starts (CD, TUNER, AUDIO IN, iPod, USB,
TAPE).
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit
enters the stand-by mode after 15 minutes of inactivity.
E-9
Listening to a CD or MP3/WMA disc
(continued)
■
Advanced CD or MP3/WMA disc
playback
Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
CD
USB
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
TAPE
FUNCTION
POWER
ON/STAND-BY
■
VOL
Direct track search
PUSH
OPEN
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / (CD / ) button to start playback. After the
AUDIO IN
PHONES
last track is played, the unit will stop automatically.
Caution:
● Do not place two discs in one disc tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
● Do not push the disc tray while it is moving.
● If the power fails while the tray is open, wait until the power is
restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● Be sure to place 3" (8 cm) disc in the middle of the disc tray.
● Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP3/WMA disc:
● When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode
(only for CD).
● Rewritable multi-session discs with unfinished writing, can
still be played.
■
Various disc functions
Function
Main
unit
Remote
control
Operation
Press in the stop mode.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the /
button to resume playback
from the paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
____
Fast
forward/
reverse
____
Downloaded From Disc-Player.com Sharp Manuals
Use the Direct Search buttons on the remote control to
select the desired track while playing the selected disc.
● The Direct Search buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
B. For example, to choose 130
1
2
3
4
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
● A track number higher than the number of tracks on the disc
cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
■
Play
Track up/
down
By using the Direct Search buttons, the desired tracks on the
current disc can be played.
Repeat play
Repeat play can play one track, all tracks or a programed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “1-REPEAT”
appears. Press the / (CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “ALL REPEAT”
appears. Press the / (CD / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programed play” section on page 11 and
then press the PLAY MODE button repeatedly until “ALL
REPEAT” appears.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL”
appears and “
” disappears.
E-10
Advanced CD or MP3/WMA disc playback (continued)
■
■
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” appears. Press the / (CD / )
button.
Programed play (MP3/WMA)
1 While in the stop mode, press the MEMORY button to
enter the programming save mode.
2
To cancel random play:
Press and hold the PLAY MODE button until “NORMAL”
appears and “R” disappears.
Press the TUNING ( or ) button on the remote
control to select the desired folder.
Then press the
or
button on the remote
control to select the desired tracks.
Notes:
● If you press the
button during random play, you can
move to the track selected next by the random
operation. On the other hand, the button does not allow
you to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Caution:
After performing repeat play, be sure to press the
(CD ) button. Otherwise, the disc will play continuously.
■
Programed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1 While in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the
or
buttons on the remote control to
select the desired track.
3 Press the MEMORY button to save the folder and
track number.
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programed.
5 Press the
Adding tracks to the program:
If a program has been previously stored, the “MEMORY”
indicator will be displayed. Then follow steps 1 - 3 to add
tracks. The new tracks will be stored after the last track of
the previous program.
Notes:
● When a disc is ejected, the program is automatically
canceled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programed selections will be cleared.
● During the program operation, random play is not
possible.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programed. If you want to check the programed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programed tracks can be cleared
by pressing the CLEAR/DIMMER button.
/ (CD
/ ) button to start playback.
Downloaded From Disc-Player.com Sharp Manuals
/ ) button to start playback.
To cancel the programed play mode:
During programed stop mode, press the (CD ) button.
The display will show “MEM CLEAR” and all the
programed contents will be cleared.
Selected track number
5 Press the
/ (CD
E-11
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
● Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
■
CD
USB
About folder playback order
TAPE
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folders can be selected by the FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next
folder will be selected.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
To play back CD-R/RW.
1 ROOT folder is set as folder 1.
1 Press the CD button, and load an MP3/WMA disc.
■
Procedure to playback MP3/WMA disc with
folder mode on
After disc is loaded, disc info will be displayed.
2 As for folders inside ROOT folder (Folder A and Folder
B), the folder which is recorded earlier on the disc will
be set as folder 2 and folder 3.
MP3 indicator
WMA indicator
3 As for folder inside Folder A (Folder C and Folder D),
the folder which is recorded earlier on the disc will be
set as folder 4 and folder 5.
4 Folder E that is inside Folder D will be set as folder 6.
● The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
● For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from those
played back when folder mode is turned off.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER B
(FOLDER 3)
FOLDER C
(FOLDER 4)
FILE 3
FILE 4
FILE 5
FOLDER D
(FOLDER 5)
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
Disc
Name
TOTAL indicator
Total number
of folder
Total number of
files
2 Press the FOLDER button, and press the TUNING (
or ) button on the remote control to select desired
playback folder. (Folder mode on)
FOLDER
indicator
First track
number in the
folder
FOLDER
number
3 Select desired file to be played back by pressing the
or
button.
4 Press the / (CD / ) button. Playback will start and
file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded on the disc.
● In case of playback with the folder mode on, press
the TUNING ( or ) button on the remote control,
and the folder can be selected even though it is in
playback/pause mode. It will continue playback/
pause mode in the 1st track of the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
FILE 9
FILE 10
File name display
FILE 1
FILE 2
Function display
Title display
Artist display
Album display
Note:
If “NO SUPPORT” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
Downloaded From Disc-Player.com Sharp Manuals
E-12
Listening to USB mass storage device/MP3 player
■
TIMER
FUNCTION
POWER
ON/STAND-BY
To play back USB/MP3 player with folder
mode on
VOL
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
PUSH
OPEN
AUDIO IN
PHONES
2 Press the FOLDER button, and press the TUNING (
or ) button on the remote control to select desired
playback folder. To start playback with folder mode on,
go to step 4. To change the playback folder, press the
TUNING ( or ) button on the remote control to
select another folder.
CD
USB
3 Select desired file to be played back by pressing the
or
button.
4 Press the
/ (USB / ) button. Playback will start
and the file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
TAPE
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■
■
1 Press the
To play back USB/MP3 player with folder
mode off
To remove USB memory device
(USB
) button to stop playback.
2 Disconnect USB memory device from the USB
terminal.
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or
button.
3 Press the
/ (USB / ) button. Playback will start
and the file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the / (USB
/ ) button.
Auto power off function:
In the stop mode of USB operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
Downloaded From Disc-Player.com Sharp Manuals
Notes:
● SHARP will not be held liable for the loss of data while
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
E-13
Listening to USB mass storage
device/MP3 player (continued)
Advanced USB playback (continued)
Notes:
● This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, “NO
SUPPORT” is indicated and the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
● The USB port is only intended for direct connection to
a USB memory device without any cable.
Advanced USB playback
The following functions are the same as CD
operations:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
● Maximum total number of MP3/WMA files is 1024.
Maximum total number of folders is 255 inclusive of
root directory.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
Auto power on function:
When you press any of the following buttons, the unit turns
on.
● USB button on the remote control: The unit turns on
and the “USB” function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER, USB,
TAPE, AUDIO IN, iPod).
Downloaded From Disc-Player.com Sharp Manuals
E-14
Listening to the radio
■
CD-DH790
POWER
ON/STAND-BY
1 Perform steps 1 - 3 in “Tuning”.
FUNCTION
POWER
ON/STAND-BY
Memorising a station
You can store 40 AM and FM stations in memory and recall
them at the push of a button. (Preset tuning)
M I N I C OM PON EN T S YS T E M
2 Press the MEMORY button.
VOL
3 Within 30 seconds, press the PRESET (
or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
CD
USB
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEMORY” and preset
number indicators disappear before the station is
memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
TAPE
preset station. When a new station is stored in the
memory, the station previously memorized for that
preset channel number will be erased.
Auto power on function:
When you press any of the following buttons, the unit turns
on.
● TUNER (BAND) button (remote control only): The unit
turns on and the “TUNER” function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER,
AUDIO IN, USB, iPod, TAPE).
■
Note:
The backup function protects the memorized stations for a
few hours should there be a power failure or the AC power
cord become disconnected.
■
To recall a memorized station
Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button on the main unit or
TUNER (BAND) button on the remote control
repeatedly to select the desired frequency band (FM
stereo, FM mono or AM).
3 Press the TUNING (
or
■
1 Press the PRESET (
or ) button for more than 0.5
seconds. The preset number will flash and the
programed stations will be tuned in sequentially, for 5
seconds each.
) button to tune in to the
desired station.
● Manual tuning:
Press the TUNING ( or ) button repeatedly to
tune in to the desired station.
● Auto tuning:
When the TUNING ( or ) button is pressed for
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING ( or )
button again.
To receive an FM stereo transmission:
● Press the FUNCTION button on main unit or TUNER
(BAND) button on remote control repeatedly to select
stereo mode and “ST” indicator will be displayed. “
”
will appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER (BAND)
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
Downloaded From Disc-Player.com Sharp Manuals
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
2 Press the PRESET (
or
desired station is located.
■
) button again when the
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by
mode.
2 While pressing down the FUNCTION button, press the
E-15
POWER ON/STAND-BY button until “TUNER CLEAR”
appears.
POWER
ON/STAND-BY
Listening to a cassette tape
Before playback:
● For playback, use normal or low-noise
tapes for the best sound. (Metal or
CrO2 tapes are not recommended.)
● Do not use C-120 tapes or poor-quality
tapes, as they may cause malfunctions.
● Before loading a tape into the cassette
compartment, tighten the slack with a pen
or a pencil.
■
Tape playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button on main unit repeatedly
or TAPE button on remote control to select TAPE
function.
3 Open the cassette door
VOL
VOL
by pushing the area
marked “ PUSH OPEN”.
AUDIO IN
AUDIO IN
PHONES
PHONES
PUSH
OPEN
PUSH
OPEN
M I N I C OM PON EN T SY STE M
4 Load a cassette into the
CD-DH790
cassette compartment.
POWER
ON/STAND-BY
FUNCTION
POWER
ON/STAND-BY
ENT SYSTEM
CD-DH790
MINI COMPON
VOL
FUNCTION
POWER
ON/STAND-BY
VOL
OPEN/
CLOSE
PUSH
OPEN
AUDIO IN
AUDIO IN
PHONES
PHONES
5 Press the
/ (TAPE
) button to start playback.
Auto power on function:
When you press any of the following buttons, the unit turns
on.
● TAPE button (remote control): The unit turns on and
the “TAPE” function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function starts (iPod, CD, TUNER,
USB, AUDIO IN, TAPE).
CD
USB
TAPE
Auto power off function:
In the stop mode of tape operation, the main unit enters the
stand-by mode after 15 minutes of inactivity.
TAPE
■
Various tape functions
Function
Main
unit
Remote
control
Operation
Tape
playback
Press in the stop
mode.
Stop
Press in the
playback, fast
forward or fast
rewind mode.
Press in the
playback or stop
mode.
____
Fast
forward/
Fast rewind
Caution:
● To remove the cassette, press the (TAPE ) button,
and then open the compartment.
● If a power failure occurs during tape operation, the tape
head will remain engaged with the tape and the
cassette door will not open. In this case, wait until the
power is restored.
Downloaded From Disc-Player.com Sharp Manuals
E-16
Timer and sleep operation (Remote control only)
■
Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 6). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
CD
USB
1 Press the ON/STAND-BY button to turn the power on.
TAPE
2 Press and hold the CLOCK/TIMER button.
3 Within 10 seconds, press the
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN, TAPE) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
Daily timer:
Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every
morning.
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button. Set the clock to the correct time if
“ONCE SET” or “DAILY SET” does not appear.
4 Within 10 seconds, press the
or
button to
select “TIMER SET”, and press the MEMORY button.
5 To adjust the hour, press the
6 To adjust the minutes, press the
Stop
button and
8 To select the timer playback source (CD, TUNER, USB,
iPod, TAPE or AUDIO IN), press the
or
button.
Press the MEMORY button.
When you select the tuner, select a station by pressing
the
or
button, and then press the MEMORY
button. If a station has not been programed, “NO
PRESET” will be displayed and timer setting will be
canceled.
9 Adjust the volume using the VOLUME control, and then
press the MEMORY button. Do not turn the volume up
too high.
1 minute or more
Daily timer
or
7 Set the time to finish as in steps 5 and 6 above.
1 Set the daily timer (pages 17 - 18).
Start
button and
then press the MEMORY button.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio program,
and use the daily timer to wake up.
2 Set the once timer (pages 17 - 18).
or
then press the MEMORY button.
Once timer
Start
10 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
Stop
M I NI CO M P O NE NT S Y S T E M
CD-DH790
POWER
ON/STAND-BY
FUNCTION
VOL
PUSH
OPEN
AUDIO IN
11 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The “ ” indicator will blink during timer
playback.
The “DAILY” indicator will blink during timer playback.
Downloaded From Disc-Player.com Sharp Manuals
E-17
Timer and sleep operation (Remote control only) (continued)
12 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is canceled.
Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack,
select “USB” or “AUDIO IN” in step 8.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
■
Sleep operation
The radio, compact disc, iPod and USB can all be turned
off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10
20
30
....... 80
90
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
Checking the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
To confirm the remaining sleep time:
2 Within 10 seconds, press the
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
3 Within 10 seconds, press the
or
button to
select “TIMER CALL”, and press the MEMORY button.
Cancelling the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
1 While “SLEEP” is indicated, press the SLEEP button.
1 While “SLEEP” is indicated, press the SLEEP button.
2 Within 10 seconds, press the SLEEP button repeatedly
to select “SLEEP 00”.
2 Within 10 seconds, press the
■
3 Within 10 seconds, press the
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
or
button to
select “TIMER OFF”, and press the MEMORY button.
Timer will be canceled (the setting will not be
canceled).
To use timer and sleep operation together
1 Set the sleep time (see above, steps 1 - 5).
2 While the sleep timer is set, set the timer playback
(steps 2 - 9, page 17).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
Sleep timer
setting
End
time
Timer playback
setting
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
90 minutes
2 Within 10 seconds, press the
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
3 Within 10 seconds, press the
or
button to
select “TIMER ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power
stand-by mode.
Downloaded From Disc-Player.com Sharp Manuals
E-18
Sleep operation will
automatically stop
Desired time
Timer playback
start time
Enhancing your system
Troubleshooting chart
The connection cord is not included. Purchase a
commercially available cord as shown below.
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service
center.
■
Portable audio
player, etc.
General
Symptom
● The clock is not set
to the correct time.
Audio cable
(not supplied)
● When a button is
pressed, the unit
does not respond.
MINI COMPONENT S Y S T E M
CD-DH790
AUDIO IN
FUNCTION
POWER
ON/STAND-BY
● No sound is heard.
PHONES
VOL
PUSH
OPEN
AUDIO IN
PHONES
■
Possible cause
● Did a power failure occur?
Reset the clock. (Refer page
7)
● Set the unit to the power
stand-by mode and then turn
it back on.
● If the unit still malfunctions,
reset it. (Refer page 20)
● Is the volume level set to
“0”?
● Are the headphones
connected?
● Are the speaker wires
disconnected?
CD player
● AUDIO IN button on the remote control: The unit turns
on and the “AUDIO IN” function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER,
AUDIO IN, USB, iPod, TAPE).
Symptom
Possible cause
● Playback does not ● Is the disc loaded upside
down?
start.
● Does the disc satisfy the
● Playback stops in
standards?
the middle or is not
performed properly. ● Is the disc distorted or
scratched?
● Playback sounds
● Is the unit located near
are skipped, or
excessive vibrations?
stopped in the
● Is the disc very dirty?
middle of a track.
● Has condensation formed
inside the unit?
■
■
Auto power on function (AUDIO IN):
When you press any of the following buttons, the unit turns
on.
Listening to the playback sounds of
portable audio player, etc.
1 Use a connection cord to connect the portable audio
player etc. to the AUDIO IN jack. When using video
equipment, connect the audio output to this unit and
the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO IN button on the remote control or
FUNCTION button repeatedly on main unit to select
AUDIO IN function.
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
Note:
To prevent noise interference, place the unit away from the
television.
■
Remote control
Symptom
● The remote control
does not operate.
■
Tuner
Symptom
● The radio makes
unusual noises
continuously.
Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphones,
reduce the volume.
● Be sure your headphones have a 1/8" (3.5 mm)
diameter plug and impedance between 16 and 50
ohms. The recommended impedance is 32 ohms.
● Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
Downloaded From Disc-Player.com Sharp Manuals
■
Possible cause
● Is the unit placed near the
TV or computer?
● Is the FM antenna or AM
loop antenna placed
properly? Move the antenna
away from the AC power
cord if it is located nearby.
Cassette deck
Symptom
● Sound skipping.
● Cannot hear treble.
● Sound Fluctuation.
● Cannot remove the
tape.
E-19
Possible cause
● Is the AC power cord of the
unit plugged in?
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
Possible cause
● Is there any slack?
● Is the tape stretched?
● Are the capstans, pinch
rollers or heads dirty?
● If a power failure occurs
during playback, the heads
remain engaged with the
tape. Do not open the
compartment with great
force.
Troubleshooting chart (continued)
■
■
USB
Symptom
Possible cause
● Device cannot be ● Is there any MP3/WMA file
detected.
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● Playback does not ● Is it a copyright protected
start.
WMA file?
● Is it a false MP3 file?
● Wrong time display. ● Is Variable Bitrate file being
● Wrong file name
played back?
display.
● Is the File Name written in
Chinese
or
Japanese
characters?
■
iPod
Possible cause
● The iPod is not playing.
● The iPod is not properly
connected to the unit.
● Is the AC power cord of the
unit plugged in?
● The video cable is not
properly connected.
● The TV/monitor’s input
selection is not properly
set.
● iPod will not charge. ● Wrong iPod adaptor is
used.
● The iPod is not making full
contact with the iPod
connector.
● The main unit is in stand-by
mode.
● Using 3rd generation iPod.
■
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■
stand-by mode.
2 While pressing down the OPEN/CLOSE button, press
the POWER ON/STAND-BY button until “ALL CLEAR”
appears.
POWER
ON/STAND-BY
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
program.
■
Symptom
● No sound is
produced.
No image appears
on the TV/monitor.
Factory reset, clearing all memory
1 Press the ON/STAND-BY button to enter the power
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in
the disc tray. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can damage
the unit.
■
Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the center, along the
radius.
NO
YES
Correct
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power
on again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Downloaded From Disc-Player.com Sharp Manuals
Maintenance
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (gasoline, paint
thinner, etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-20
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
General
Power source
AC 120 V ~ 60 Hz
Power
consumption
55 W
Dimensions
Width: 9 - 7/16" (240 mm)
Height: 12 - 7/16" (315.5 mm)
Depth: 11 - 5/32" (283.2 mm)
Weight
■
USB host interface ● Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage
Class.
● Support Bulk only and CBI
protocol.
Support file
● MPEG 1 Layer 3
● WMA (Non DRM)
Bitrate support
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Other
● Maximum total number of
MP3/WMA files is 1024.
● Maximum total number of
folders is 255 INCLUSIVE of
root directory.
● The
ID3TAG
information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1
and version 2.
File system
support
● Support USB devices with
Microsoft Windows/DOS/FAT
12/ FAT 16/ FAT 32.
● 2 kbyte block length for sector.
8.8 lbs. (5.4 kg)
PMPO: 2800 watts
RMS: Total 200 watts
(100 watts per channel into 4
ohms at 1 kHz, 10% total
harmonic distortion)
FTC: 75 watts minimum RMS per
channel into 4 ohms from 100
Hz to 20 kHz, 10% total
harmonic distortion.
Output terminals Speakers: 4 ohms
■
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals
■
CD player
Single disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Cassette deck
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise
ratio
50 dB (playback)
Wow and flutter
0.35% (WRMS)
Downloaded From Disc-Player.com Sharp Manuals
Tuner
Frequency range
Audio In (audio signal):
250 mV/47 k ohms
Type
■
USB
Amplifier
Output power
■
■
FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Speaker
Type
2-way type speaker system
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
Maximum input
200 W
power
Rated input power
100 W
Impedance
4 ohms
Dimensions
Width: 7-1/16" (180 mm)
Height: 11-13/16" (300 mm)
Depth: 8" (204 mm)
Weight
6.0 lbs. (2.7 kg)/each
E-21
SHARP CORPORATION
TINSZA519AWZZ
Downloaded From Disc-Player.com Sharp Manuals
Printed in Malaysia
Impreso en Malaysia
09H R MW 3