Yamaha NX-SW150 Owner`s manual

UB
SATELLITE SPEAKERS / CENTER SPEAKER / SUBWOOFER
NX-P150
(NX-S150 + NX-C150 + NX-SW150)
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1
Read these instructions.
CAUTION
2
Keep these instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
* Explaination of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tipover.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15 Be sure to allow spaces of at least 20 cm above, behind
and on both sides of NX-SW150.
16 Do not place the following objects on this unit:
A vessel with water in it.
If the vessel falls by vibrations and water spills, it may
cause damage to the unit, and/or you may get an electric
shock.
i CAUTION
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by YAMAHA may
void your authority, granted by the FCC, to use the product.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
2. IMPORTANT :
When connecting this product to accessories and/or another
product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could
void your FCC authorization to use this product in the USA.
Relocate either this product or the device that is being
affected by the interference.
3. NOTE :
This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements
provides a reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of other electronic devices.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact YAMAHA Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by YAMAHA Corporation of America or its
subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and
the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive
volume levels.
CAUTION ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install the speakers in a cool, dry, clean place – away from
windows, sources of heat, sources of excessive vibration, dust,
moisture or cold. Avoid sources of electrical humming (e.g.,
transformers and motors). To prevent fire or electric shock,
do not expose the speakers to rain or water.
To prevent the enclosure from warping or discoloring, do not
expose the speakers to direct sunlight or excessive humidity.
Avoid installing the speakers where foreign objects may fall
onto them and/or where they may be exposed to liquid
dripping or splashing.
Do not place the following objects on top of the speakers:
– Other components, as they might damage or discolor the
surface of the speakers;
– Burning objects (e.g., candles), as they might cause fire,
damage to the speakers or personal injury;
– Containers of liquid, as they might spill and cause electric
shock to the user or damage to the speakers.
Do not place the speakers where they are liable to be knocked
over or struck by falling objects. Stable placement will also
ensure better sound.
Placing the speakers on the same shelf or rack as the
turntable can result in feedback.
Secure placement or installation is the owner’s responsibility.
YAMAHA is not liable for accidents caused by improper
placement or installation of speakers.
If you note distortion, reduce the volume control on your
amplifier. Do not drive your amplifier to the point of
“clipping”. Otherwise, the speakers may be damaged.
When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care should be
taken not to exceed the speakers’ maximum input.
Do not clean the speakers with chemical solvents as this
might damage the finish. Use a clean, dry cloth.
Do not attempt to modify or fix the speakers. Contact
qualified YAMAHA service personnel when service is needed.
Do not open the cabinet under any circumstances.
Please read the “Troubleshooting” section regarding common
operating errors before concluding that the speakers are
faulty.
For the NX-SW150
1
2
3
4
5
Do not operate this unit upside down. It may overheat,
possibly causing damage.
Do not use excessive force on switches, controls or connection
wires. When moving this unit, first disconnect the power plug
and the wires connected to other equipment. Never pull the
wires themselves.
Since this unit has a built-in power amplifier, heat radiates
from the rear panel. Place the unit away from walls, allowing
at least 20 cm of space above, behind and on both sides of the
unit to prevent fire or damage. Furthermore, do not position
the unit with the rear panel facing down on the floor or other
surfaces.
When using a humidifier, be sure to avoid condensation
inside this unit by allowing enough space around the unit and
avoiding excess humidification. Condensation might cause
fire, damage to the unit, or electric shock.
Do not cover the rear panel of this unit with a newspaper,
tablecloth, curtain, etc. to avoid obstructing heat radiation. If
the temperature inside the unit rises, it may cause fire,
damage to the unit, or personal injury.
iii CAUTION
6
7
8
9
10
11
12
13
14
15
16
Do not plug this unit into a wall outlet until all connections
are complete.
The voltage to be used must match that specified on the rear
panel. Using this unit with a voltage higher than specified is
dangerous and may cause fire, damage to the unit, or
personal injury. YAMAHA is not responsible for damage
resulting from use of this unit with a voltage other than
specified.
To prevent damage from lightning, disconnect the AC power
plug during electric storms.
Super-bass frequencies reproduced by this unit may cause a
turntable to generate audio feedback. In this case, move the
unit away from the turntable.
This unit may be damaged if certain sounds are continuously
output at high volume level. For example, if 20Hz–50Hz sine
waves from a test disc or bass sounds from an electronic
instrument, etc. are continuously output, or if a turntable
stylus touches the surface of a disc, reduce the volume level to
prevent the unit from being damaged.
If you hear distorted noise (i.e., unnatural, intermittent
“rapping” or “hammering” sounds) from this unit, reduce
the volume level. Extremely loud movie soundtrack low
frequency, bass-heavy sounds, or similarly loud popular
music passages can damage the speaker system.
Vibration generated by super-bass frequencies may distort
images on a TV. In this case, move the unit away from the TV
set.
When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
When you plan not to use this unit for a long period of time
(i.e., vacation, etc.) disconnect the AC power plug from the
wall outlet.
Do not place much pressure against the subwoofer net. It may
break the net or the unit may fall, resulting in injury.
Do not place anything fragile beside the subwoofer. The air
pressure produced by the subwoofer may break the objects
and cause malfunction or injury.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear or the bottom of this
unit.
Retain this Owner’s Manual in a safe place for future
reference.
■ For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
Table of Contents
Introduction.................................................... 2
About this manual .....................................................2
Note
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■ Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
Package Contents.......................................... 2
Roles and Layout of Speakers ..................... 3
Placing the Speakers..................................... 3
Placing the center speaker.........................................3
Placing the subwoofer ...............................................4
Placing the Front and Surround Speakers .................4
Connecting the Speakers ...........................................6
Troubleshooting ............................................ 7
Specifications ............................... back cover
This product is a speaker package consisting of the components
shown on the table.
Please check to make sure that all of the components listed in the
table are included.
Model name
NX-P150
Category
No. of pcs
NX-S150
Satellite speakers
(for front/surround)
4
NX-C150
Center speaker
1
NX-SW150
Subwoofer
1
Active Servo Processing Subwoofer System with built-in
power amplifier.
This subwoofer system (NX-SW150) employes Advanced
YAMAHA Active Servo Technology which YAMAHA has
developed for reproducing higher quality super-bass sound.
This super-bass sound adds a more realistic, theater-in-thehome effect to your stereo syetem.
1
INTRODUCTION
Introduction
“NX-P150” consists of four satellite speakers (front/surround), a center speaker, and a subwoofer. Please take great
pleasure in real sounds with the YAMAHA 5.1ch speaker system “NX-P150”.
Satellite speakers (front/surround)
NX-S150 (4 units)
Center speaker
NX-C150 (1 unit)
Subwoofer
NX-SW150 (1 unit)
About this manual
• This manual provides only information on installation methods or specifications for the speakers. For information about
how to connect the speakers to your YAMAHA CinemaStation, refer to the manual for CinemaStation.
• This manual was printed before final product development. Due to operational upgrades and other reasons, the
specifications of the actual product or packaging may differ from the contents of this manual.
Package Contents
This product includes the following items. Before installing the speakers, make sure all of the items are in the box.
Cables and installation parts
Subwoofer cable
(1 pin, 5 m, 1 unit)
Mounting brackets
(for front/surround speakers, 4 units)
Non-skid pads
(for subwoofer,
1 set: 4 units)
Screws (M4 × 10)
(for front/surround speakers, 4 units)
Non-skid pads
(for front/surround speakers,
2 sets: 16 units)
System control cable
(5 m, 1 unit)
Fasteners
(for center speaker, 2 units)
2
Roles and Layout of Speakers
Each speaker has different roles based on the types of sound each produces. This section explains the main role/s of each speaker and the
recommended speaker layout.
Center Speaker
Place on top of the TV or inside the TV rack so that the speaker
and TV are aligned vertically.
Main role: Produces sounds oriented toward the center of the
screen such as dialogues or vocal sounds.
Center speaker
Front Speaker (R)
Front speaker (L)
Surround speaker (R)
Front Speakers (L, R)
Place the front left/right speakers on both sides of your TV at
equal distances.
Main roles: Produces front channel (stereo) sounds and effect
sounds.
1.8 m
Surround Speakers (L, R)
Place the surround left/right speakers behind the listening
position. (We recommend placing them at a height of 1.8 m
(6 feet) and pointing them at the listening position.)
Main roles: Produces surround sounds and effect sounds.
Surround
speaker (L)
Subwoofer
Subwoofer
Place the subwoofer near a front speaker and turn it slightly
toward the center of the room to reduce wall reflections.
Main roles: Produces bass sounds and low frequency (LFE)
sounds contained in Dolby Digital or DTS.
Notes
• If the speakers interfere with TV reception, noises may appear on the TV screen. In such a case, move the speakers a little away from
the TV.
• Bass sounds produced by the subwoofer may be heard differently depending on the listening position and subwoofer location.
To enjoy desired sounds, try to change the location of the subwoofer according to the listening position.
Placing the Speakers
To enjoy quality sounds thoroughly, you need to place the speakers in their appropriate positions and install them correctly. After
deciding the speaker layout (see “Roles and Layout of Speakers” above), follow the procedure below to install the speakers.
Placing the center speaker
When placing the center speaker on top of the TV, use the
supplied fasteners to secure the speaker.
Notes
Fastener
• Do not place the speaker on the TV if the top of the TV is not
level or if it is narrower than the bottom surface of the speaker.
Doing so may cause the speaker to fall. In this case, place the
speaker inside a TV rack or on a level floor.
• Before attaching the fasteners to the TV, clean the surface with a
dry cloth. A dirty or wet surface may weaken the adhesive force
and cause the speaker to fall.
• Do not touch the bonding surfaces of the fasteners after peeling
off the seals. Doing so may weaken the adhesive force and
cause the speaker to fall.
Peel off
the seal
3
Placing the Speakers
Placing the subwoofer
Attach the non-skid pads to the bottom of the subwoofer, and then
place the subwoofer on a level hard floor.
y
Using non-skid pads prevents the subwoofer from sliding when it
vibrates, and ensures quality sound production.
NX-SW150
Detach
VOLTAGE SELECTOR
(China, Korea, Asia and General models only)
The VOLTAGE SELECTOR on
the rear panel of this unit must
110V –120V
VOLTAGE
be set for your local main
SELECTOR
220V –240V
voltage BEFORE plugging into
the AC main supply.
Voltages are 110 V – 120 V, 220 V – 240 V AC, 50/60 Hz.
Placing the Front and Surround Speakers
You can place the front and surround speakers on the floor or a rack, or attach them to a wall. Also, you can mount them on YAMAHA
speaker stands “SPS-80” or commercially available speaker stands. Please select an installation method that suits your room layout.
To place on the floor or a rack
Attach the non-skid pads to the bottom of each speaker, and then
place them on level hard surfaces.
y
Using non-skid pads prevents the speakers from sliding when
they vibrate, and ensures quality sound production.
Non-skid pad
To attach to a wall
Screws (3.5 to 4 mm (1/8” to 5/32”) dia.,
commercially available)
70 mm
(2-3/4”)
70 mm
(2-3/4”)
10 mm (13/32”)
20 mm (25/32”)
or more
4
You can attach the speakers to a wall using commercially
available screws (Diameter: 3.5 to 4 mm (1/8” to 5/32”),
Length: 20 mm (25/32”) or more). One speaker requires two
screws. To attach all speakers to a wall, you need to prepare eight
screws.
1
Install two screws in the wall where you want
to place the speaker.
2
Hang the speaker on the screws using the
holes in the back of the speaker.
Placing the Speakers
Notes
• One speaker weighs about 0.9 kg (2 lbs). To attach a speaker to a wall using screws, the wall must be firm. Do not attach a speaker to
a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the speaker to fall.
• Make sure you use specified screws to attach a speaker to a wall. Using clamps other than specified screws, such as short screws, nails,
or two-sided tape, may cause the speaker to fall.
• When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets
caught on a loose speaker cable, the speaker may fall.
• After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no responsibility for any accidents caused
by improper installations.
To mount on a speaker stand
Mounting bracket
(supplied)
Screw (supplied)
60 mm (2-3/8”)
You can mount the speakers on YAMAHA speaker stands
“SPS-80” (set of two, optional) or commercially available
speaker stands. When using commercially available
speaker stands, follow the procedure below to attach the
supplied mounting bracket to the speaker. When using
YAMAHA speaker stands “SPS-80”, you do not need the
following procedure.
For information on how to mount a speaker on the speaker
stand, refer to the manual for the speaker stand you want
to use.
1
Attach the mounting bracket to the speaker
using the supplied screw.
The jutting part of the bracket should fit to the groove
at the speaker base.
2
Mount the speaker on the speaker stand
using the holes on the mounting bracket.
To mount a speaker on a commercially available
speaker stand, you need two screws (Diameter: 4 mm
(5/32”)), spring washers, and washers. For more
information, refer to the manual for the speaker stand
you want to use.
YAMAHA speaker stand “SPS-80” (set of two, optional)
To mount a speaker on the YAMAHA speaker stand
“SPS-80”, refer to manual for the speaker stand.
* This product may not be available in certain regions.
For information, contact the store where you purchased
the product or your nearest YAMAHA dealer.
SPS-80
5
Placing the Speakers
Connecting the Speakers
Notes
• Do not connect the power cord of the subwoofer and other audio/video components into an AC outlet until all cable connections are
completed.
• For details on how to connect to the CinemaStation, refer to the owner’s manual of CinemaStation.
Front speaker
Right
Front speaker
Left
Center speaker
CinemaStation
SUBWOOFER
OUT
MONITOR
OUT
(DVD ONLY)
VCR
OUT
SPEAKERS
R
FRONT
L
CENTER FRONT
GND
VIDEO
IN
SURROUND
R
SURROUND
SYSTEM
CONNECTOR
SPEAKER IMPEDANCE: 6 MIN.
FM
ANT
PB
AUDIO
75
UNBAL
INPUT
SYSTEM
CONNECTOR
Subwoofer
To AC outlet
VIDEO
MONITOR VCR
OUT
OUT
DIGITAL
AUDIO
IN
(DVD ONLY)
PR
COMPONENT
VIDEO
Subwoofer cable
Left
Right
Surround speakers
MONITOR
OUT
L
System
control
cable
6
S VIDEO
Y
AM
ANT
VCR
IN
VIDEO
IN
VCR
IN
OUT
OPTICAL
Troubleshooting
If there is any problem with your speakers, check the following items. If you cannot solve your problem with the
following remedies or if your problem is not listed below, contact the store where you purchased the product or your
nearest YAMAHA dealer and ask for assistance.
Problem
The speakers make no sound
A particular speaker makes no
sound
The subwoofer makes strange
sounds
Sound level is too low
Cause
What to do
The volume is set to minimum level.
Adjust the volume on the A/V
equipment connected to the speakers.
The mute function is enabled.
Disable the mute function on the A/V
equipment connected to the speakers.
The input setting is improper.
Select the proper input setting on the
A/V equipment connected to the
speakers.
The cables are not connected
properly.
Check the cable connections in your
system. For details, refer to
“Connecting the Speakers” (page 6).
Since each speaker has different roles
based on the types of sound each
produces, some speakers do not
produce sound in some cases.
For details, refer to “Roles and
Layout of Speakers” (page 3).
Depending on the speaker settings or
the playback modes used on the A/V
equipment connected to the speakers,
some speakers do not make sounds in
some cases.
For details, refer to the manual for the
A/V equipment.
The volume for the speaker is set to
minimum level.
Adjust the volume on the A/V
equipment connected to the speaker.
The cable is connected improperly.
Check the cable connection between
the speaker and the A/V equipment.
The subwoofer is not placed properly. For details, refer to “Roles and
Layout of Speakers” (page 3).
The subwoofer cable is connected
improperly.
Check the cable connection between
the subwoofer and the A/V
equipment.
You are playing a sound source that
includes inadequate bass frequencies.
Play a sound source that includes
more bass frequencies.
7
SPECIFICATIONS
Specifications
Satellite speaker (front/surround)
Subwoofer
Model name NX-S150
Model name NX-SW150
• Type............ Full range acoustic suspension magnetic shielding type
• Type ...........Advanced YAMAHA Active Servo Technology System
• Driver ...........5 cm (2”) full range cone x 2, magnetic shielding type
• Driver ..........................16 cm (6 1/2”) cone, magnetic shielding type
• Rated Input Power..................................................................... 30 W
• Output Power ............................50 W (100 Hz, 5 Ω at THD = 10%)
• Maximum Input Power............................................................ 100 W
• Frequency Response ................................................. 30 Hz – 200 Hz
• Impedance .................................................................................... 6 Ω
• Power Supply
U.S.A. and Canada models.................................. AC 120 V, 60 Hz
Australia model ................................................... AC 240 V, 50 Hz
U.K. and Europe models ..................................... AC 230 V, 50 Hz
Asia, China, Korea and General models
.................................................. AC 110-120/220-240 V, 50/60 Hz
• Frequency Response.................................100 Hz – 25 kHz (–10 dB)
• Sensitivity.................................................................. 86 dB/2.83 Vm
• Dimensions (W × H × D)................................... 72 × 170 × 108 mm
(Approx. 2 27/32” × 6 11/16” × 4 1/4”)
• Weight ...................................................................................... 0.9 kg
(Approx. 2 lbs)
Center speaker
Model name NX-C150
• Type............ Full range acoustic suspension magnetic shielding type
• Driver ...........5 cm (2”) full range cone x 2, magnetic shielding type
• Rated Input Power..................................................................... 30 W
• Maximum Input Power............................................................ 100 W
• Power Consumption................................................................... 40 W
• Dimensions (W × H × D) ................................. 200 × 365 × 390 mm
(Approx. 7 7/8” × 14 3/8” × 15 11/32”)
• Weight.......................................................................................8.4 kg
(Approx. 18 lbs 8 oz)
General
• Operating Temperature range
........................................................... +5°C to +35°C (41°F to 95°F)
• Impedance .................................................................................... 6 Ω
• Operating Humidity Range
..............................................................5 to 90% (No Condensation)
• Frequency Response.................................100 Hz – 25 kHz (–10 dB)
Specifications are subject to change without notice.
• Sensitivity.................................................................. 86 dB/2.83 Vm
• Dimensions (W × H × D)................................... 300 × 72 × 105 mm
(Approx. 11 13/16” × 2 27/32” × 4 1/8”)
• Weight ...................................................................................... 1.1 kg
(Approx. 2 lbs 6 oz)
© 2004
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
WD57590