Philips AZ2537 User manual

CD Soundmachine
AZ2537
Knoxville, Tennessee 37914-1810, U.S.A.
User Manual
Manuel d'utilisation
Manual del usario
1-800-531-0039
RTAN
PO
Return
your Warranty
Registration Card
within 10 days
or visit us on the web at www.philips.com
EE
E
S
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
IM
Philips representatives are ready to help you
with any questions about your new product.
Meet Philips at the Internet
http://www.philips.com
T!
Need help? Call us!
PHILIPS CONSUMER ELECTRONICS
NORTH AMERICA
WH
Y INS
ID
W
AZ 2537
CLASS 1
LASER PRODUCT
Downloaded From Disc-Player.com Philips Manuals
IMPORTANT SAFETY INSTRUCTIONS
Return your Product Registration Card today
to get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once to ensure:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
*Proof of
Purchase
*Product Safety *Additional
Benefits of
Notification
Product
Ownership
Returning the enclosed card
By registering your product, you'll
Registering your product
guarantees that your date of
receive notification - directly from
guarantees that you'll receive
purchase will be on file, so no
the manufacturer - in the rare
all of the privileges to which
additional paperwork will be
case of a product recall or safety
you're entitled, including special
required from you to obtain
defect.
money-saving offers.
warranty service.
Know these
safetysymbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates
uninsulated material within your
unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove
product covering.
The “exclamation point” calls
attention to features for which
you should read the enclosed
literature closely to prevent operating
and maintenance problems.
Downloaded From Disc-Player.com Philips Manuals
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet.
Retain this information for future
reference.
Model No. ______________________
Serial No. ______________________
WARNING: To reduce the risk of fire
or electric shock, this apparatus should
not be exposed to rain or moisture, and
objects filled with liquids, such as vases,
should not be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
fully insert.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus
large de la fiche dans la borne
correspondante de la prise et pousser
jusqu’au fond.
12.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the
safety purpose of the
polarized or
AC Polarized
Plug
grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments/accessories
specified by the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
15.Battery usage CAUTION – To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
●
Install all batteries correctly, + and - as
marked on the unit.
●
Do not mix batteries (old and new or
carbon and alkaline, etc.).
●
Remove batteries when the unit is not used
for a long time.
16.Apparatus shall not be exposed to
dripping or splashing.
17.Do not place any sources of danger
on the apparatus (e.g. liquid filled
objects, lighted candles).
18.This product may contain lead and mercury.
Disposal of these materials may be regulated
due to environmental considerations.
For disposal or recycling information,
please contact your local authorities
or the Electronic Industries Alliance :
www.eiae.org.
EL 6475-E005: 04/01
Class II equipment symbol
This symbol indicates that the unit has a double insulation system.
1
2
6
3
7
4
8
HEAVY !
Take care of your CD Soundmachine.
Grip both handles when you carry or
lift the set.
7
6
5
8
4
3
9
2
1
0
!
1
3
FM
AM
4
3
5
4
5
MA
X
AL
BU
7
M/P
RE
SE
T
6
@
#
^
%
Downloaded From Disc-Player.com Philips Manuals
2
$
5
English
CONTROL
SUPPLIED ACCESSORIES
– remote control
– video cable
– AC power cord
– Stand
TOP AND FRONT PANEL (See 1)
1 LCD Display – shows the status of the set
2 [dB]: – display to indicate bass power.
3 STANDBY ON y – switches the set on/ off.
4 VOLUME – adjusts volume level or equalizer
level
5 SOURCE – selects sound source for functions:
CD/ FM / AM / GAME AUX.
6 p – 3.5 mm stereo headphone jack.
Note: The speakers will be muted when headphones
are connected to the set.
7 OPEN•CLOSE – press to open/ close CD door
8 AUDIO IN ( LEFT / RIGHT) – keeps video plug in
place.
VIDEO IN – keeps video plug in place
-,
9 ALBUM/PRESET
+
MP3-CD only : – selects previous/next albums.;
FM/AM : selects previous/next preset stations.
SEARCH ∞ , §
MP3-CD/audio-CD: – skips and searches tracks
backward/forward.
FM/AM : - searches radio stations.
2; – starts or pauses CD playback
9 – stop CD playback;
– erases a CD program
Downloaded From Disc-Player.com Philips Manuals
0 IR SENSOR – infrared sensor for remote control
! GAMESOUND – select sound effects: BLAST/
PUNCH/ SPEED/ NORMAL in GAME AUX mode
EQUALIZER – selects bass, mid and treble
frequencies.
PROG
MP3-CD/audio-CD:– programs tracks and
reviews the programmed
songs;
FM / AM : – programs preset radio stations.
MODE – selects different CD play modes: e.g.
REPEAT or SHUFFLE order.
MAX SOUND – activates or deactivate the optimal mix of various sound features
BACK PANEL (See 1)
@ Telescopic antenna – improves FM reception
# Battery compartment – for 8 batteries, type
R-20, UM-1 or D-cells
$ AC MAINS – inlet for power cord
% VIDEO OUT – connects to the VIDEO IN jack on
a TV or VCR for viewing or recording.
^ HANDLE
Optional stand for vertical mounting (See C)
With the optional stand, you are allowed to mount
the set vertically. It helps you arrange your available
space more flexibly.
1. Put the stand on a horizontal, vibration-free and
stable surface.
2. Take the set by handle, with the AC MAINS at the
lower side.
3. Align the handle on the other side with the space
in the middle of the stand.
4. Mount the set upright and firmly onto the stand.
5. Fasten the bolt on the stand by pressing it and by
rotating it clockwise.
CONTROL
POWER SUPPLY
REMOTE CONTROL (See 1)
1 CD – selects CD sound source
FM / AM – selects tuner source / wavebands
AUX – selects GAME AUX
2 y – switches the set to standby / on if set
operating on AC power. (Switches set off only if
battery powered)
3 REPEAT – selects repeat modes in CD source;
SHUFFLE – selects shuffle modes in CD source;
MUTE – interrupts/ resumes sound
4 VOL 4, 3 – adjusts volume or equalizer level.
5 ¡ , ™ – selects previous/ next tracks in a
MP3-CD/audio CD;
9 – stops CD playback;
– erases a CD program.
2; – starts or pauses CD playback
5 / 6 – searches backwards/ forwards within a
MP3-CD/audio CD track.
– searches radio stations.
6 EQUALIZER – selects bass, mid and treble
frequencies
MAX – selects special bass enhancement on/ off
GAMESOUND – selects sound effects: BLAST/
PUNCH/ SPEED/ NORMAL in game mode
-,
7 ALBUM/PRESET
+,
MP3-CD only :– selects previous/ next albums.
FM/AM : – selects previous/next preset station.
POWER SUPPLY
Whenever convenient, use the power supply to
conserve battery life. Make sure you remove the
power cord from the set and wall jack before inserting
batteries.
BATTERIES
Using batteries (not included)
Main set (See A)
• Insert 8 batteries, type R-20, UM-1 or D-cells,
(preferably alkaline) with the correct polarity.
Remote control (See B)
• Insert 2 batteries, type AAA, R03 or UM4
(preferably alkaline).
Helpful Hints:
• Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst.
• Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
• When inserting new batteries, do not try to mix old
batteries with the new ones.
• Batteries contain chemical substances, so
they should be disposed of properly.
USING AC POWER
1. Check if the AC power supply, as shown on the
type plate located on the bottom of the set,
corresponds to your local power supply. If it does
not, consult your dealer or service center.
2. If your set is equipped with a voltage selector,
adjust the selector so that it matches with the
local power supply.
3. Connect the power cord to the wall jack and the
set is now ready for use.
Helpful Hints:
– To disconnect the power supply, unplug the set
from the wall jack.
– Disconnect the power supply to protect your set
during heavy thunderstorms.
POWER-SAVING AUTOMATIC STANDBY
As a power-saving feature, the system automatically
switches to standby 15 minutes after CD has reached
the end and no control is operated.
The type plate is located on the bottom of
the set.
DIGITAL TUNER
BASIC FUNCTIONS
SWITCHING ON AND OFF
1. Press STANDBY ON y on the set to switch on (or
press STANDBY ON on the remote control to
switch the set to standby mode).
2. Press SOURCE once or more to select your
desired function: CD, FM, AM, GAME AUX.
3. Press STANDBY ON y on the set to switch off.
(or press STANDBY ON on the remote control to
switch the set to standby mode)
Helpful Hints:
– The tone, sound settings, tuner presets and the
volume level (up to a maximum volume level of
VOL 20 ) will be retained in the set's memory.
ADJUSTING VOLUME AND SOUND
• Adjust the volume with the VOLUME control.
= Display shows the volume level
and a
number from 0-32. (See 2)
MAX SOUND
To enhance the bass response: press MAX SOUND
once or more to switch on / off.
= MAX SOUND-key backlight lights up when
MAX SOUND is turned on.
Helpful Hints:
– MAX SOUND can be used when you play FM, AM,
CD and GAME AUX source.
– Some discs might be recorded in high modulation,
which causes a distortion at high volume. If this
occurs, deactivate MAX SOUND or reduce the
volume.
EQUALIZER
1. To adjust the bass, mid and treble frequencies
press EQUALIZER once or more;
2. Rotate VOLUME within 3 seconds to adjust each
level.
=Display briefly shows
, or
,
level (-5 to +5) or
.
Helpful Hints:
– EQUALIZER can be used during FM, AM, CD and
GAME AUX source.
– To prevent sound interference the bass control
options operate exclusively. You cannot combine
the bass from EQUALIZER with MAX SOUND.
GAMESOUND
To adjust the game sound, press GAMESOUND once
or more to select your option.
=Display briefly shows
,
,
or
.
Helpful Hints:
– GAMESOUND is only available when you play in
GAME AUX source.
How to MUTE the sound
1. Press MUTE on the remote control to interrupt
sound reproduction instantly.
= Playback continues without sound and the
display flashes
.
2. To reactivate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change to another source.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Downloaded From Disc-Player.com Philips Manuals
Tuning to stations (See 3)
1. Press STANDBY ON y to on, then press
SOURCE once or more to select FM/AM (or press
FM/AM on the remote control).
= Display: shows
briefly followed by
waveband, frequency, and preset station
number if already stored.
2. Tuning to stations: you can tune to your
stations manually or by automatic search tuning:
Press down on ∞ or § ( 5 or 6 on the remote
control) and release button when the frequency in
the display starts running.
= The radio automatically tunes to a station of
sufficient reception. Display shows
during automatic tuning.
3. Repeat step 2 if necessary until you find the
desired station.
• To tune to a weak station, press ∞ or § briefly
and repeatedly until you have found optimal
reception.
Helpful Hints:
To improve radio reception:
– For FM, extend, incline and turn the telescopic
antenna. Reduce its length if the signal is too
strong.
– For AM, the set uses a built-in antenna. Direct this
antenna by turning the whole set.
Programming tuner stations:
You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).
Autostore
Automatic programming will start from preset 1 or a
chosen preset number. The set will only program stations which are not in the memory already.
1. Press ALBUM/PRESET /+ once or more to
select the preset number where programming
should start.
-
Helpful Hints:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2. Press PROG for 4 seconds or more to activate
auto store programming.
= Display:
is shown and available
stations are programmed in order of waveband
FM, followed by AM ,
3. The first preset station will then be played after all
stations are stored automatically.
Manual programming
1. Tune to your desired station (see Tuning to
stations).
2. Press PROG to activate programming.
= Display: program flashes.
-
3. Press ALBUM/PRESET /+ once or more to
allocate a number from 1 to 30 to this stations.
4. Press PROG again to confirm.
= Display: shows the preset number, waveband
and the frequency of the preset station.
MP3-CD/CD PLAYER
MP3-CD/CD PLAYER
About MP3
The music compression technology MP3 (MPEG Audio
Layer 3) reduces the digital data of an audio CD
significantly while maintaining CD-like sound quality.
How to get music files
Either download legal music files from the internet to
your computer hard disc or create them from your own
audio CDs. For this, insert an audio CD into your
computer´s CD-ROM drive and convert the music
using an appropriate encoder software. To achieve a
good sound quality, a bit rate of 128 kbps or higher is
recommended for MP3 music files.
How to make a CD-ROM with MP3 files
Use your computer´s CD burner to record (“burn”) the
music files from your hard disc on a CD-ROM.
Helpful Hints:
– For details on using MP3 encoder and writing software, please refer to the operating instructions of
the software.
– Make sure that the file names of the MP3 files end
with .mp3.
– Total number of music files and albums: around 350
(with a typical file name length of 20 characters)
– The number of music files that can be played
depends on the length of the file names. With short
file names more files will be supported.
IMPORTANT !
This set does not play/support the following file
formats:
– Word documents .doc or MP3 files with extension
.dlf.
– Playlist files (e.g. .m3u, .pls of WMA, AAC,
Winamp, Sonic, RealJunkbox, Ms Mediaplayer 7.0,
MusicMatch).
– Recordings created on PacketWriting and
Package Writing.
Playing a CD
This CD player plays Audio Discs including CD-R(W)s
and MP3 CD-ROMs. Do not try to play a CD-I, CDV,
VCD, DVD or computer CD.
1. Press STANDBY ON y once or more to on,
2. Select CD SOURCE.
3. Press OPEN•CLOSE to open the CD door.
=
is displayed when the CD door is
open.
4. Insert a CD with the printed side facing up and press
down on OPEN•CLOSE to close the CD door.
=Display shows
and later, the total
track/album number and total playback time.
Downloaded From Disc-Player.com Philips Manuals
5. Press 2; to start playback.
=Display shows : current track/album number and
elapsed playing time
Helpful Hints:
– Depending on the track type, CD or MP3 will
appear on the display during playback.
– Album number is only shown for MP3 files.
To pause playback
• Press 2;.
= the elapsed playing time flashes.
• Press 2; again to resume play.
To stop playback
• Press 9.
= Display shows :the total track/album number
and total playback time
Helpful Hints:
The MP3-CD/audio CD playback will also stop when:
– the CD door is opened
– the CD has reached the end
– you select an other sound source.
Selecting a different track
During playback
• Press SEARCH ∞ or § (¡ or ™ on the remote
control) once or repeatedly until the desired track
number appears in the display.
During stop or pause
• Press 2; to start playback after your desired
track is selected.
Different playing modes: SHUFFLE and REPEAT
(See 4 - 7)
You can select and change the various play modes
before or during playback. The play modes can also be
combined with PROGRAM.
shuffle - tracks of the entire CD/ program are played
in random order
repeat all shuffle - repeats the entire CD/ program
continuously in random order
repeat all - repeats the entire CD/ program
repeat - plays the current track continuously
To select a playing mode
• Press MODE once or more.(SHUFFLE / REPEAT
on the remote control).
• Press 2; to start playback if in the stop position.
To return to normal playback
• press MODE repeatedly until the various modes
are no longer displayed.
Helpful Hints:
– When you press 9, the selected playing mode is
also cancelled.
Programming track numbers
You can store up to 20 tracks to play in a program. A
single track may be stored more than once in the program.
1. Press 9 to stop playback
Helpful Hints:
– To find a MP3 track, you can first press
ALBUM/PRESET + to select the desired album.
2. Press SEARCH ∞ or § on the set to select your
desired track number (¡ , ™ on the remote control)
Searching for a passage within a track
1. During playback, press and hold SEARCH ∞ or
§.(5 or 6 on the remote control).
2. When you recognize the passage you want,
release ∞ or § (5 or 6 on the remote
control).
=Normal playback continues from this position.
– To find a MP3 track, you can press ALBUM/PRESET
+ to select the desired album.
-/
Helpful Hints:
-/
3. Press PROG
=Display shows: program and the selected track
number.
and the number of tracks
stored appear briefly.
4. Repeat steps 2-3 to select and store all desired
tracks.
5. To start playback of your disc program, press 2; .
Helpful Hints:
– During normal playback, you can press PROG to
add a current track to your program list.
–
appears if you press PROG and
there is no track selected.
–
appears if you try to store more than 20
tracks.
Reviewing the program
• In the stop position, press and hold down PROG
for a while until the display shows all your stored
track numbers in sequence.
Helpful Hints:
– Display shows : NO PROG if there is no track
programmed.
Clearing a program
You can erase the contents of the memory by:
• Press 9 :
– Once, if in the stop position;
– Twice, during playback.
• Press STANDBY ON;
• Select another sound source;
• open the CD door
=
displayed briefly, and program
disappears.
GAMESOUND
MAINTENANCE & SAFETY
PLAYING WITH GAMESOUND (See 8):
MAINTENANCE & SAFETY (See 9)
1. Press SOURCE once or more on the set to select
the GAME AUX function (AUX on the remote
control)
=Display scrolls :
CD player and disc handling
• If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
2. Connect your console to the cinches on the front
of the set AUDIO IN ( LEFT / RIGHT) and VIDEO
IN.
• The lens of the CD player should never be touched!
3. Press GAMESOUND once or more to select your
game sound option.
,
,
=Display briefly shows
or
.
Connecting other equipment to your system
Use the supplied video cable to connect the VIDEO
OUT terminal on the back of the set to VIDEO IN on
a TV or VCR for viewing or recording.
• Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
• Always close the CD door to avoid dust on the lens.
• To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
MAINTENANCE & SAFETY
Safety Information
• Don’t expose the set, batteries, or CDs to humidity,
rain, sand or excessive heat.
• To clean the set with a dry cloth. Don’t use any
cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the set.
• Place the set on a hard and flat surface so that the
system does not tilt. Make sure there is good
ventilation to prevent the set overheating.
• The mechanical parts of the set contain selflubricating bearings and must not be oiled or
lubricated.
• Apparatus shall not be exposed to dripping or
splashing.
• Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles)
• Never write on a CD or attach any stickers to it.
Canada
CAUTION
English
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Environmental information
Français
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Communications du Canada.
Downloaded From Disc-Player.com Philips Manuals
We have done our best to reduce the packaging and make it easy to separate into 3
materials:cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging,
exhausted batteries and old equipment.
TROUBLESHOOTING
PHILIPS LIMITED WARRANTY
If a fault occurs, first check the points listed below before taking the set for repair. If you are
unable to remedy a problem by following these hints, consult your dealer or service center.
WARNING: Do not open the set as there is a risk of electric shock! Under no
circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
No sound /power
–
•
–
•
–
•
–
•
–
•
Volume not adjusted
Adjust the VOLUME
Power Cord not securely connected
Connect the AC power cord properly
Batteries flat / incorrectly inserted
Insert (fresh) batteries correctly
Headphones connected to the set
Disconnect headphones
Electrostatic discharge/interference
Unplug the set. If batteries inserted, remove batteries
from the battery compartment. Press and hold
STANDBY ON y for 10 seconds, then re-plug /
replace battery supply, and try activating the set
again.
– CD contains non-audio files
• Press SEARCH ∞ or §. once or more to skip to
a CD audio track, instead of the data file
Poor sound quality in GAME AUX mode
• Adjust the volume on the set or on your game
console
Severe radio hum or noise
– Electrical interference: set too close to TV, VCR or
computer
• Move the set to increase the distance
Remote control does not function properly
–
•
–
•
Batteries flat/ incorrectly inserted
Insert (fresh) batteries correctly
Distance/ angle between the set too large
Reduce the distance/ angle
Poor radio reception
– Weak radio signal
• FM / AM: Adjust the FM / AM telescopic aerial
indication
– CD-R(W) is blank/ not finalized
• Use a finalized CD-R(W)
indication
–
•
–
•
–
•
No CD inserted
Inserted a suitable disc
CD badly scratched or dirty
Replace/ clean CD, see Maintenance
Laser lens steamed up
Wait until lens has cleared
The CD skips tracks
– CD damaged or dirty
• Replace or clean CD
– shuffle or program is active
• Switch off shuffle / program
Sound skips during MP3 playback
– MP3 file made at compression level exceeding
320kbps
• Use a lower compression level to record CD
tracks into MP3 format
– Disc damaged or dirty
• Replace or clean disc
Cannot find desired MP3 title
– Wrong file extension used and/ or file name
with unsuitable text characters used
• Make sure the file names are typed in English
text characters an that the MP3 files end with
.mp3
One (1) Year Free Product Exchange
PHILIPS CONSUMER ELECTRONICS warrants this
product against defect in material or workmanship, subject to
any conditions set forth as follows:
PROOF OF PURCHASE:
You must have proof of the date of purchase to exchange the
product. A sales receipt or other document showing the product, the date that you purchased the product, as well as the
authorized retailer included, is considered such proof.
COVERAGE:
Warranty coverage begins the day you buy your product. For a
period of one (1) year from the date of purchase, if the product
is determined to be defective, Philips will exchange the defective product with a new or renewed product, at its option, at
no charge. The replacement product is covered only for the
warranty period of the original product. When the warranty on
the original product expires, the warranty on all replaced products also expires. When it is necessary for you to ship the
product to Philips for exchange, you will pay the shipping cost
for shipment to Philips. Philips will pay the shipping costs when
returning a product to you.
Note: The exchange model supplied will be the most comparable one in Philips current inventory. Shipping of your product to
Philips implies intent to follow the specified requirements of the
warranty and exchange program. Product received by Philips
cannot be returned. Replacement product can only be sent if all
warranty requirements are met. Failure to follow all requirements can result in delay of exchange process.
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation
or repair of antenna systems outside of the product.
• Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Philips.
• Damage occurring to product during shipping when improperly packaged or cost associated with packaging.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Products lost in shipment and no signature verification of
receipt can be provided.
• Products sold AS IS or RENEWED.
WHERE WARRANTY EXCHANGE IS AVAILABLE:
Exchange is available in all countries where Philips officially distributes the product. In countries where Philips does not distribute the product, the local Philips organization will attempt
to exchange the product, although there may be a delay if the
appropriate product is not readily available, or special customs
processes are implied.
FOR EXCHANGE IN THE U.S.A., PUERTO RICO, OR
U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-800-531-0039
FOR EXCHANGE IN CANADA…
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER. PHILIPS
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. In addition, if you enter into a
service contract agreement with the PHILIPS partnership within
ninety (90) days of the date of sale, the limitation on how long
an implied warranty lasts does not apply.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 520890, Miami, FL 33152
EL6587E001 / 01-04
Downloaded From Disc-Player.com Philips Manuals
(402) 536-4171
9
C
X
B
A
1
8 x D-cells - R20 - UM1
2 x AAA
Downloaded From Disc-Player.com Philips Manuals
2