M570.book Page a Thursday, June 10, 2010 12:00 PM
User Guide
www.sprint.com
©2010 Sprint. SPRINT and the logo are trademarks of Sprint.
Other marks are the property of their respective owners.
6/10/10
M570.book Page b Thursday, June 10, 2010 12:00 PM
Consejo: Para encontrar esta guía para usuarios en español,
por favor visita a www.sprint.com y haz clic en
Support > Devices.
To find this user guide in Spanish, please visit
www.sprint.com and click Support > Devices.
Important Privacy Message – Sprint’s policies often do not
apply to third-party applications. Third-party applications may
access your personal information or require Sprint to disclose
your customer information to the third-party application
provider. To find out how a third-party application will collect,
access, use, or disclose your personal information, check the
application provider’s policies, which can usually be found on
their website. If you aren’t comfortable with the third-party
application’s policies, don’t use the application.
Open Source Software – Some software components of this
product incorporate source code covered under GNU General
Public License (GPL), GNU Lesser General Public License
(LGPL), OpenSSL License, BSD License and other open
source licenses. To obtain the source code covered under the
open source licenses, please visit:
http://opensource.samsungmobile.com/index.jsp.
M570_UG_DD26_PS_061010_F6
M570.book Page c Thursday, June 10, 2010 12:00 PM
Table of Contents
Tip: Looking for something? If you don’t see it in the headings
listed here, try the Index on page 191.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . i
Section 1: Getting Started . . . . . . . . . . . . . . . . . 1
1A. Setting Up Service . . . . . . . . . . . . . . . . . . . 2
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . .
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . .
Sprint Account Passwords . . . . . . . . . . . . . . . . . . .
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
4
4
5
Section 2: Your Phone . . . . . . . . . . . . . . . . . . . . 7
2A. Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . 8
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Viewing the Display Screen . . . . . . . . . . . . . . . . . 11
Turning Your Phone On and Off . . . . . . . . . . . . . 16
Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . 16
Navigating Through the Menus . . . . . . . . . . . . . . 19
Displaying Your Phone Number . . . . . . . . . . . . .
Making and Answering Calls . . . . . . . . . . . . . . .
Entering Text in Portrait Mode . . . . . . . . . . . . . . .
Entering Text in Landscape Mode . . . . . . . . . . .
21
22
31
35
2B. Navigating the Main Screen . . . . . . . . . . 42
Getting to Know Sprint One Click . . . . . . . . . . . 42
Personalizing the Carousel . . . . . . . . . . . . . . . . . 44
2C. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . .
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TTY Use With Sprint Service . . . . . . . . . . . . . . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . .
Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
48
50
52
53
54
55
56
57
2D. History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . .
History Options . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call From History . . . . . . . . . . . . . . . . .
Saving a Number From History . . . . . . . . . . . . .
62
63
64
64
M570.book Page d Thursday, June 10, 2010 12:00 PM
Erasing History . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2E. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Adding a New Contacts Entry . . . . . . . . . . . . . . 66
Adding a New Group . . . . . . . . . . . . . . . . . . . . . . 67
Saving a Phone Number . . . . . . . . . . . . . . . . . . . 67
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . 68
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . 68
Adding a Number to a Contacts Entry . . . . . . . 69
Editing a Contacts Entry’s Numbers . . . . . . . . . 69
Deleting a Contact . . . . . . . . . . . . . . . . . . . . . . . . . 70
Assigning Speed Dial Numbers . . . . . . . . . . . . . 70
Selecting a Ringer Type for an Entry . . . . . . . . . 71
Assigning a Picture to an Entry . . . . . . . . . . . . . . 72
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . 72
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . 73
Dialing Sprint Services . . . . . . . . . . . . . . . . . . . . . 73
Wireless Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2F. Calendar & Tools . . . . . . . . . . . . . . . . . . . . 76
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
File Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Eco Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Updating Your Phone . . . . . . . . . . . . . . . . . . . . . .
Updating the PRL . . . . . . . . . . . . . . . . . . . . . . . . . .
82
83
83
83
84
84
84
2G. Voice Services . . . . . . . . . . . . . . . . . . . . . 85
Automatic Speech Recognition (ASR) . . . . . . . . 85
Managing Voice Memos . . . . . . . . . . . . . . . . . . . 88
2H. microSD Card . . . . . . . . . . . . . . . . . . . . . . . 91
Your Phone’s microSD Card and Adapter . . . .
microSD Card Settings . . . . . . . . . . . . . . . . . . . . .
microSD Card Folders . . . . . . . . . . . . . . . . . . . . .
Connecting Your Phone to Your Computer . . .
91
93
94
95
2I. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . 101
Storing Pictures and Videos . . . . . . . . . . . . . . . 102
Sending Pictures and Videos . . . . . . . . . . . . . . 104
Printing Pictures From Your Phone . . . . . . . . . . 107
M570.book Page e Thursday, June 10, 2010 12:00 PM
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Data Services FAQs . . . . . . . . . . . . . . . . . . . . . . 149
2J. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 109
3C. Entertainment: TV and Music . . . . . . . . 151
Turning Bluetooth On and Off . . . . . . . . . . . . . .
Using the Bluetooth Settings Menu . . . . . . . . .
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . .
Sending Items via Bluetooth . . . . . . . . . . . . . . .
109
110
110
111
Section 3: Sprint Service . . . . . . . . . . . . . . . . 115
3A. Sprint Service: The Basics . . . . . . . . . . 116
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messaging (SMS/MMS) . . . . . . . . . . . . . . . . . . .
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a 3-Way Call . . . . . . . . . . . . . . . . . . . . . .
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . .
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
116
119
121
122
122
123
123
3B. Web and Data Services . . . . . . . . . . . . . 127
Getting Started With Data Services . . . . . . . . .
Browser Menu . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing Messages . . . . . . . . . . . . . . . . . . . . .
Downloading Games, Ringers, and More . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
127
131
135
138
141
TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Music – Sprint Music Store . . . . . . . . . . . . . . . . 154
Streaming Music . . . . . . . . . . . . . . . . . . . . . . . . . 160
3D. GPS Navigation . . . . . . . . . . . . . . . . . . . . 162
GPS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sprint Navigation . . . . . . . . . . . . . . . . . . . . . . . . .
Sprint Family Locator . . . . . . . . . . . . . . . . . . . . .
Getting Driving Directions . . . . . . . . . . . . . . . . .
Configuring Your Navigation Preferences . . . .
Launching the Product Tour . . . . . . . . . . . . . . .
162
162
164
164
170
172
Section 4: Safety and Warranty
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
4A. Important Safety Information . . . . . . . . 174
General Precautions . . . . . . . . . . . . . . . . . . . . . .
Maintaining Safe Use of and Access to
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Your Phone With a Hearing
Aid Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caring for the Battery . . . . . . . . . . . . . . . . . . . . .
Radio Frequency (RF) Energy . . . . . . . . . . . . .
174
175
176
178
179
M570.book Page f Thursday, June 10, 2010 12:00 PM
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . 181
User Guide Proprietary Notice . . . . . . . . . . . . . . 181
4B. Manufacturer’s Warranty . . . . . . . . . . . . 182
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . 182
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
M570.book Page i Thursday, June 10, 2010 12:00 PM
Introduction
Your Phone’s Menu
This User Guide introduces you to Sprint® service and
all the features of your new phone. It’s divided into four
sections:
The following table outlines your phone’s main menu
structure. For more information about using your
phone’s menus and the carousel main screen, see
“Navigating Through the Menus” on page 19 and
section 2B “Navigating the Main Screen” on page 42.
⽧
Section 1: Getting Started
⽧
Section 2: Your Phone
⽧
Section 3: Sprint Service Features
⽧
Section 4: Safety and Warranty Information
Note: Because of updates in phone software, this printed
guide may not be the most current version for your
phone. Visit www.sprint.com and sign on to My Sprint
to access the most recent version of the user guide.
WARNING: Please refer to the Important Safety Information
section on page 174 to learn about information
that will help you safely use your phone. Failure to
read and follow the Important Safety Information
in this phone guide may result in serious bodily
injury, death, or property damage.
OPTIONS (Left Softkey)
1: Main Menu
2: Personalize Carousel
3: Tutorial
4: Software Updates
5: Minimize Carousel
6: Reset One Click
7: About Sprint One Click
CONTACTS (Right Softkey)
Web
i
M570.book Page ii Thursday, June 10, 2010 12:00 PM
Maps
1: Sprint Navigation
2: Sprint Family Locator
Entertainment
1: Music
2: Sprint TV
3: Games
1: Get New Games
2: My Stuff Manager Games
3: Bejeweled Demo
4: Diner Dash Flo on the Go
5: Texas HoldEm Poker Demo
History
3: Ringers
1: Get New Ringers
1: Get New Screen Savers
2: My Stuff Manager Screen Savers
5: Applications
1: Get New Applications
2: My Stuff Manager Applications
3: NASCAR Sprint Cup Mobile
4: Scan Life
5: Social Zone
6: Sprint Football Live
6: Call Tones
Photos & Videos
Missed Alerts
1: Camera
My Stuff
Press right softkey to view the following options:
1: Application Manager
1: Mode
1: Camera
2: Games
1: Get New Games
2: My Stuff Manager Games
3: Bejeweled Demo
4: Diner Dash Flo on the Go
5: Texas HoldEm Poker Demo
ii
2: My Stuff Manager Ringers
4: Screen Savers
2: Camcorder
2: Shooting Mode
1: Single Shot
3: Mosaic
5: Night Shot
2: Continuous
4: Panorama
M570.book Page iii Thursday, June 10, 2010 12:00 PM
3: Resolution
1: 2M
3: High
5: Low
10: Auto-Send
2: 1.3M
4: Med
1: Phone
4: White Balance
1: Auto
3: Cloudy
5: Flourescent
2: Daylight
4: Incandescent
6: Manual
5: Brightness
2: 5 Sec
7: Effect
1: Mode
1: Auto
3: Cloudy
5: Flourescent
2: Camcorder
2: Daylight
4: Incandescent
6: Manual
1: Brightness
4: Self Timer
1: Off
3: 10 Sec
2: Normal
9: Shutter Sound
1: Off
3: Shutter 2
Press the right softkey to view the following options:
3: Brightness
2: MONOCHROME
4: NEGATIVE
6: GREEN
8: Quality
1: Fine
3: Economy
2: Card
2: White Balance
6: Self Timer
1: None (default)
3: SEPIA
5: AQUA
2: Off
2: Camcorder (Video Mail/Long Video)
1: Camera
1: Brightness
1: Off
3: 10 Sec
1: On
11: Storage
2: Shutter 1
4: Shutter 3
2: 5 Sec
5: Effect
1: None (default)
3: SEPIA
5: AQUA
2: MONOCHROME
4: NEGATIVE
6: GREEN
iii
M570.book Page iv Thursday, June 10, 2010 12:00 PM
3: Messages
6: Quality
1: Fine
3: Economy
2: Normal
5: Settings
7: Auto-Send
1: On
2: Off
1: Notification
2: Card
2: Callback Number
1: Message & Icon
8: Storage
1: Phone
3: My Photos & Videos
1: In Phone
2: Memory Card
4: My Places
Contacts
6: Settings
2: Status Bar
Settings
1: Display
Messages
1: Screen Saver
1: Voicemail
iv
2: Off
5: Reset Envelope
1: Add-Send Places
2: Send Message
2: [your phone]
3: Prest Messages
1: On
5: Auto-Send
1: Call Voicemail
1: None
3: Other
2: Icon Only
4: Signature
1: Add New Place..
1: Auto Save to
4: Email
2: Clear Envelope
1: No Image
3: My Albums
5: Preloaded
2: Take New Picture
4: Downloaded
M570.book Page v Thursday, June 10, 2010 12:00 PM
4: Auto Keyguard
2: Picture ID
1: Contacts
3: Private/Unknown
2: Unsaved Numbers
3: Backlight Control
1: Backlight Dim
3: Java Backlight
1: Word Complete
2: Backlight Off
4: Brightness
5: PowerSave Mode
1: On
2: Off
1: Incoming Ringer Volume
2: Playback Volume
2: Next Word Complete
6: Phone Information
1: Phone Number/User ID
2: Memory Status
3: Icon Glossary
4: Version
5: Advanced
6: My Account
1: Change Lock Code
2: Keep Existing Lock Code
3: Cancel
8: Location
1: Use Ringer Volume
2: Seperate Volume
1: On
3: Key Beeps
2: Off
9: Parental Controls
2: Tone Volume
3: Ringers
1: Incoming Calls
3: Text Message
5: PowerUp/Down
2: Off
7: Lock Phone
2: Volume
1: Tone Type
1: On
5: Text Entry
2: Voicemail
4: Alarm/Calendar
6: Battery Alert
1: On/Off
2: Change Parental Control Code
3: Restrictions
0: Reset/Delete
v
M570.book Page vi Thursday, June 10, 2010 12:00 PM
*: Others
1: Abbreviated Dialing
3: Airplane Mode
5: Contact Match
7: Language
9: Wireless Backup
7: Calculator
2: Accessibility
4: Data
6: Roaming
8: Contacts
10: TTY Options
Tools
2: Update PRL
5: Mass Storage
1: Connect to PC
2: File Manager
3: Format Memory Card 4: Memory Info
vi
2: Review
Shopping
In Use Menu
2: Visibility
4: Trusted Devices
4: Update Phone
6: Voice Service
9: World Time
1: Record
2: Add Calendar
3: Bluetooth
1: Update Firmware
8: Device Self Service
*: Voice Memo
2: Calendar
1: On/Off
3: Add new
5: My Bluetooth Info
2: Tip Calculator
0: Memo Pad
1: Alarm
1: Personal Calendar
1: Calculator
3: Eco Calculator
Press MUTE/UNMUTE (left softkey).
Press OPTIONS (right softkey) to display the following
options:
1: Save/Contact Details
2: 3-way call
3: Contacts
4: Voice Memo
5: Phone Info
6: Key Mute/Unmute 7: Messaging
8: Recent History
9: Tools
M570.book Page 1 Thursday, June 10, 2010 12:00 PM
Section 1
Getting Started
M570.book Page 2 Thursday, June 10, 2010 12:00 PM
●
1A. Setting Up Service
⽧
Setting Up Your Phone (page 2)
⽧
Activating Your Phone (page 3)
⽧
Setting Up Your Voicemail (page 4)
⽧
Sprint Account Passwords (page 4)
⽧
Getting Help (page 5)
Setting Up Your Phone
1. Install the battery.
䡲
䡲
2
Remove the battery from its packaging.
Place your fingernail into the Release Latch
indention (adjacent to the microphone) and
carefully lift (1) the case off the rear of the
phone (2).
1A. Setting Up Service
This is similar to popping the top off a soda
can.
Release Latch
M570.book Page 3 Thursday, June 10, 2010 12:00 PM
Insert the battery into the opening in the back of
the phone (3), making sure the connectors align.
Gently press down to secure the battery (4).
䡲
If your phone is not yet activated, see “Activating
Your Phone” on page 3 for more information.
Setting Up Service
䡲
3. Make your first call.
䡲
䡲
Use your keypad to enter a phone number.
Press
.
Note: Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible. See “Charging the
Battery” on page 18 for details.
Activating Your Phone
䢇
If you purchased your phone at a Sprint Store, it is
probably activated and ready to use.
䢇
䡲
Position the battery cover over the battery
compartment and press down until you hear a
click.
2. Press
to turn the phone on.
䡲 If your phone is activated, it will turn on, search for
Sprint service, and enter standby mode.
If you received your phone in the mail and it is for a new
Sprint account or a new line of service, it is designed to
activate automatically. To confirm your activation,
make a phone call.
䢇
If you received your phone in the mail and you are
activating a new phone for an existing number on your
account, you will need to go online to activate your
new phone.
1A. Setting Up Service
3
M570.book Page 4 Thursday, June 10, 2010 12:00 PM
From your computer’s Web browser, go to
www.sprint.com/activate and complete the
onscreen instructions to activate your phone.
When you have finished, make a phone call to
confirm your activation. If your phone is still not
activated or you do not have access to the Internet,
contact Sprint Customer Service at 1-888-211-4727
for assistance.
䡲
Tip: Do not press
Pressing
while the phone is being activated.
cancels the activation process.
Note: If you are having difficulty with activation, contact Sprint
Customer Service by dialing 1-888-211-4727 from any
other phone.
1. From standby mode, press and hold
.
2. Follow the system prompts to:
Create your passcode.
Record your name announcement.
䡲 Record your greeting.
䡲
䡲
Note: Voicemail Passcode
Sprint strongly recommends that you create a
passcode when setting up your voicemail to protect
against unauthorized access. Without a passcode,
anyone who has access to your phone is able to
access your voicemail messages.
For more information about using your voicemail, see
“Voicemail” on page 116.
Setting Up Your Voicemail
Sprint Account Passwords
Your phone automatically transfers all unanswered
calls to your voicemail, even if your phone is in use or
turned off. You should set up your Sprint Voicemail and
personal greeting as soon as your phone is activated.
Always use a passcode to protect against unauthorized
access.
As a Sprint customer, you enjoy unlimited access to
your personal account information, your voicemail
account, and your data services account. To ensure
that no one else has access to your information, you
will need to create passwords to protect your privacy.
4
1A. Setting Up Service
Account Username and Password
If you are the account owner, you will create an account
username and password when you sign on to
www.sprint.com. (Click Need to register for access? to get
started.) If you are not the account owner (if someone
else receives the bill for your Sprint service), you can
get a sub-account password at www.sprint.com.
Voicemail Password
You’ll create your voicemail password (or passcode)
when you set up your voicemail. See “Setting Up Your
Voicemail” on page 4 for more information on your
voicemail password.
Data Services Password
With your Sprint phone, you may elect to set up an
optional data services password to control access and
authorize Premium Service purchases.
For more information, or to change your passwords,
sign on to www.sprint.com or call Sprint Customer
Service at 1-888-211-4727.
Getting Help
Managing Your Account
Online: www.sprint.com
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Access your account information.
Check your minutes used (depending on your Sprint
service plan).
View and pay your bill.
Enroll in Sprint online billing and automatic payment.
Purchase accessories.
Shop for the latest Sprint phones.
View available Sprint service plans and options.
Learn more about data services and other products
like Sprint Picture Mail, games, ringers, screen
savers, and more.
From Your Sprint Phone
䢇
Press
account balance.
to check minute usage and
䢇
Press
to make a payment.
1A. Setting Up Service
5
Setting Up Service
M570.book Page 5 Thursday, June 10, 2010 12:00 PM
M570.book Page 6 Thursday, June 10, 2010 12:00 PM
䢇
䢇
Press
to access a summary of
your Sprint service plan or get answers to other
questions.
Press
to add a new line of service,
upgrade your phone, purchase accessories, or
access other account services.
䢇
Sprint Customer Service: 1-888-211-4727.
Business Customer Service: 1-800-927-2199.
Sprint 411
Sprint 411 gives you access to a variety of services
and information, including residential, business, and
government listings; movie listings or showtimes;
driving directions, restaurant reservations, and major
local event information. You can get up to three pieces
of information per call, and the operator can
automatically connect your call at no additional charge.
There is a per-call charge to use Sprint 411, and you
will be billed for airtime.
䊳
6
Press
1A. Setting Up Service
Sprint Operator Services provides assistance when you
place collect calls or when you place calls billed to a
local telephone calling card or third party.
䊳
Press
.
For more information or to see the latest in products
and services, visit us online at www.sprint.com.
From Any Other Phone
䢇
Sprint Operator Services
.
M570.book Page 7 Thursday, June 10, 2010 12:00 PM
Section 2
Your Phone
M570.book Page 8 Thursday, June 10, 2010 12:00 PM
Your Phone
2A. Phone Basics
1. Front LED
13. Earpiece
2. Status Bar
Icons
⽧
Your Phone (page 8)
⽧
Viewing the Display Screen (page 11)
3. Display Screen
4. Navigation Key
12. MENU/OK
5. Softkey (right)
Portrait Mode
⽧
Turning Your Phone On and Off (page 16)
5. Softkey (left)
Portrait Mode
⽧
Battery and Charger (page 16)
6. SPEAKER Key
11. BACK/Clear Key
⽧
Navigating Through the Menus (page 19)
7. TALK Key
10. END/POWER Key
⽧
Displaying Your Phone Number (page 21)
⽧
Making and Answering Calls (page 22)
⽧
Entering Text in Portrait Mode (page 31)
⽧
Entering Text in Landscape Mode (page 35)
Tip: Phone Software Upgrades – Updates to your phone’s
8. Keypad
9. Microphone
14. Charger/Accessories
Jack
20. Camera Lens
19. Headset Jack
15. Volume Button
software may become available from time to time. Sprint
will automatically upload critical updates to your phone.
You can also use the menu to check for and download
updates.
> Tools > Update
• Highlight
and press
Phone to search for and download available
updates.
8
2A. Phone Basics
Portrait Mode
18. Camera
Button
16. microSD Card
(internal)
17. Cover Release
Latch
M570.book Page 9 Thursday, June 10, 2010 12:00 PM
1. Front Indicator Light (LED) shows your phone’s
connection status at a glance.
2. Status Bar Icons provide information about your
phone’s status and options, such as signal
strength, roaming, ringer setting, messaging, and
battery charge.
3. Display Screen displays all the information needed
to operate your phone, such as the call status, the
Contacts list, the date and time, and the signal and
battery strength.
4. Navigation Key (similar to an optical joystick) uses
touch to scroll through the phone’s menu options.
Pressing it accepts an onscreen selection.
5. Softkeys Portrait Mode let you select left and right
softkey actions or menu items corresponding to
the bottom left and bottom right lines on the
Display Screen when the phone is in portrait mode.
6. SPEAKER Key lets you place or receive calls in
speakerphone mode.
7. TALK Key (
) allows you to place or receive
calls, answer Call Waiting, use 3-Way Calling, or
activate Voice Dial.
8. Keypad lets you enter numbers, letters, and
characters, and navigate within menus. Press and
hold keys for speed dialing.
9. Microphone allows other callers to hear you clearly
when you are speaking to them.
10. END/POWER Key (
) lets you turn the phone on
or off, end a call, or return to standby mode. While
in the main menu, it returns the phone to standby
mode and cancels your input. When you receive
an incoming call, press to enter silent mode and
mute the ringer.
11. BACK/Clear Key deletes characters from the
display in text entry mode. When in a menu,
pressing the Back key (
) returns you to the
previous menu. This key also allows you to return
to the previous screen in a data session.
12. MENU/OK lets you access the phone’s menus and
selects the highlighted choice when navigating
through a menu.
2A. Phone Basics
9
Phone Basics
Key Functions
M570.book Page 10 Thursday, June 10, 2010 12:00 PM
13. Earpiece lets you hear the caller and automated
prompts.
14. Charger/Accessory Jack allows you to connect the
phone charger or an optional USB cable.
CAUTION! Inserting an accessory into the incorrect
jack may damage the phone.
15. Volume Button allows you to adjust the ringer
volume in standby mode (with the phone open) or
adjust the voice volume during a call. The volume
button can also be used to scroll up or down to
navigate through the different menu options.
19. Headset Jack allows you to plug in either a stereo
headset or an optional headset for convenient,
hands-free conversations.
CAUTION! Inserting an accessory into the incorrect
jack may damage the phone.
20. Camera Lens, as part of the built-in camera, lets
you take pictures and videos.
Landscape Phone Features
Landscape Mode
21. Softkey (right) 28. Back Key
16. microSD Card (internal) lets you use a microSD
card to expand the memory of your phone. To gain
access to this slot, you must first remove the
battery cover.
21. Softkey
(left)
17. Cover Release Latch lets you remove the battery
cover and expose both the internal battery
compartment and internal microSD card slot.
18. Camera Button lets you activate the camera and
camcorder and take pictures and videos.
22. QWERTY
Keyboard
23. Shift Key
24. Fn Key
25. Text Key
10
2A. Phone Basics
26. Space Key
27. Enter/
OK Key
M570.book Page 11 Thursday, June 10, 2010 12:00 PM
right softkey actions or menu items corresponding
to the bottom left and bottom right lines on the
Display Screen when the phone is in landscape
mode.
22. QWERTY Keyboard provides an alphanumeric
character keyboard layout.
23. Shift Key lets you toggle alphabet characters
between mixed case, uppercase and lowercase.
Character case remains as selected until the Shift
key is pressed again.
24. FN Key (Function) key, toggles to access the white
numbers/symbols on the QWERTY keyboard.
28. Back Key deletes characters from the display in text
entry mode. When in a menu, pressing
returns you to the previous menu. This key also
allows you to return to the previous screen in a
data session.
Viewing the Display Screen
Phone Basics
21. Softkeys Landscape Mode let you select left and
Your phone’s display screen provides information
about your phone’s status and options. This list
identifies the symbols you’ll see on your phone’s
display screen:
Tip: To view a list of your phone’s icons and descriptions, from
25. Text Key launches the New Text Message menu
the main menu select Settings > Phone Information >
Icon Glossary.
from where you can initiate a new outgoing text
message.
Note: For information about using your phone’s main screen
26. Space Key lets you add spaces between words
carousel, see section 2B “Navigating the Main Screen”
on page 42.
and characters.
27. Enter/OK Key lets you perform the function
highlighted in the current menu. Press to enter
additional lines of text.
2A. Phone Basics
11
M570.book Page 12 Thursday, June 10, 2010 12:00 PM
Status Bar – Service Icons
Signal Strength – Your current signal strength.
(More bars = stronger signal.)
EVDO Data Service Active – Sprint mobile
broadband data service (EVDO) is active.
No Service – Your phone cannot find a usable
signal.
EVDO Data Service Dormant – Sprint mobile
broadband data service (EVDO) is dormant.
Roaming – Your phone is “roaming” off the
Nationwide Sprint Network.
Data Status – Sprint 1xRTT data service is
available. When active, the icon is animated.
Data Sending – Sprint 1xRTT data service is
transmitting data.
Data Receiving – Sprint 1xRTT data service is
receiving data.
Data Dormant – Data service is currently
dormant.
EVDO Data Service Available – Sprint mobile
broadband data service (EVDO) is available.
When active and communicating, the icon is
animated.
EVDO Data Service Status – Current status of the
Sprint mobile broadband data service.
12
Status Bar – Service Icons
2A. Phone Basics
Status Bar – Status Icons
Battery Strength – Your current battery charge
level. (Icon shown is fully charged.)
Low battery – Your current battery charge level
is low.
Location On – Your phone’s location feature is
on and available for location-based services
such as GPS Navigation.
Location Off – Your phone’s location feature is
off. Your location is available only for 911 (see
page page 52).
TTY – Your phone is operating in TTY mode.
Keytones Muted – Your phone’s key tones are
muted.
M570.book Page 13 Thursday, June 10, 2010 12:00 PM
Status Bar – Status Icons
Speakerphone Enabled – Your phone’s
speakerphone feature is enabled.
Status Bar – Status Icons
Alarm – An alarm has been set on your phone.
Silence All – All incoming sounds are turned off.
Status Bar – Messaging Icons
Phone Basics
Vibrate Only – The ringer is set to vibrate only.
Text Message – You have new text messages.
Ring and Vibrate – Your phone has the ringer
volume set and the vibrate option checked
(enabled).
Urgent Message – You have new messages
marked as Urgent.
Ringer – The phone is set to ring only.
Picture Mail Message – You have new picture
mail messages.
Ringer Off – The ringer is turned off and vibrate
mode is disabled.
Voicemail – You have new voicemail messages.
Ringer Off and Vibrate – Your phone has the
ringer deactivated and the vibrate option
checked (enabled).
Email Message – You have new email
messages.
1 Beep – Your phone is set to beep when an
incoming call is received.
1 Beep and Vibrate – Your phone is set to beep
and vibrate when an incoming call is received.
Press and hold
to call your voicemail box.
Missed Picture Mail Message – You have a new
Picture mail message.
Missed Text/Email Message – You have new
unread text or email messages.
Missed Voicemail Message – You have new
unheard vociemail messages.
2A. Phone Basics
13
M570.book Page 14 Thursday, June 10, 2010 12:00 PM
Status Bar – Messaging Icons
Locked Message – You have new text
messages.
Status Bar – Other Icons
Missed Scheduler – You have missed a
scheduled event.
Missed Alarm – You have missed an alarm
event.
Missed Call – You have missed an incoming
call.
Missed Call Alert – You have missed a call alert.
Multiple Alerts – You have multiple alert
messages.
Calendar Event – You have a pending event
scheduled.
Camera Mode – The camera is enabled and you
are in Camera Mode.
Camcorder Mode – The camcorder is enabled
and you are in Camcorder Mode.
14
2A. Phone Basics
Status Bar – Other Icons
Self Timer – The self-timer function is enabled.
AWB
White Balance (Auto) – The white balance has
been set to Automatic. This is used for taking
pictures indoors or outdoors using automatic
white balance settings.
White Balance (Daylight) – The white balance
has been set to Sunny. This is used for taking
pictures or movies outdoors on bright sunny
days.
White Balance (Cloudy) – The white balance has
been set to Cloudy. This is used for taking
pictures or movies outdoors under cloudy
conditions.
White Balance (Incandescent) – The white
balance has been set to Tungsten. This is used
for taking pictures or movies indoors under
normal lighting conditions.
White Balance (Fluorescent) – The white
balance has been set to Fluorescent. This is
used for taking pictures or movies indoors
under fluorescent lighting conditions.
M570.book Page 15 Thursday, June 10, 2010 12:00 PM
White Balance (Manual) – The white balance has
been set to Manual. This is used for taking
pictures indoors or outdoors using your own
custom settings.
Recording – A video or voice memo is currently
being recorded.
Paused– A voice memo or video has been
paused.
Play – A a voice memo or video is playing.
Media Upload – Files have been uploaded to an
online album or folder.
Status Bar – Other Icons
Bluetooth (Stereo Connected) – The Bluetooth
stereo device is connected and visible.
Bluetooth (Hidden) – The device is hidden to
other Bluetooth devices and not transmitting its
information.
Background Application +1 – Indicates that
more than one application is currently running
and one has been minimized and placed in the
background.
Phone Basics
Status Bar – Other Icons
Wireless Backup – A current wireless backup
session is in progress.
Voice Caption – Voice captioning is enabled and
that audio is currently being recorded.
Bluetooth (Enabled/Active) – The Bluetooth
technology is active and enabled.
Bluetooth (Connected) – The Bluetooth device is
connected.
Bluetooth (Headset Connected) – The Bluetooth
Headset is connected and visible.
2A. Phone Basics
15
M570.book Page 16 Thursday, June 10, 2010 12:00 PM
Turning Your Phone On and Off
Turning Your Phone Off
䊳
Turning Your Phone On
䊳
Press and hold
for two seconds.
Once your phone is on, it may display “Searching for
Service.” When your phone finds a signal, it enters
standby mode – the phone’s idle state. At this point,
you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
(when your phone is turned on).
Tip: The Power Save feature conserves your battery power
when you are in an area where there is no signal.
16
2A. Phone Basics
Press and hold
for two seconds until you see
the powering-down animation on the display
screen.
Your screen remains blank while your phone is off
(unless the battery is charging).
Battery and Charger
WARNING: Use only Sprint-approved os Samsungapproved batteries and chargers with your
phone. The failure to use a Sprint-approved or
Samsung-approved battery and charger may
increase the risk that your phone will overheat,
catch fire, or explode, resulting in serious bodily
injury, death, or property damage.
Sprint-approved or Samsung-approved batteries and
accessories can be found at Sprint Stores or through
Samsung; or call 1-866-866-7509 to order. They’re
also available at www.sprint.com.
M570.book Page 17 Thursday, June 10, 2010 12:00 PM
Your phone is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge your battery before it is
fully drained. The battery provides up to 6.0 hours of
continuous digital talk time.
When the battery reaches 5% of its capacity, the battery
icon blinks (
). When there are approximately two
minutes of talk time left, the phone sounds an audible
alert and then turns off.
2. Place your fingernail into the Release Latch
indention (adjacent to the microphone) and
carefully lift the case off the rear of the phone.
3. Lift the battery up (1) and remove the battery from
the phone (2).
WARNING: Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
Phone Basics
Battery Capacity
Note: Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery’s talk and standby times.
Tip: Watch your phone’s battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
䊳
See “Setting Up Your Phone” on page 2.
Removing the Battery
1. Make sure the power is off so that you don’t lose
any stored numbers or messages.
2A. Phone Basics
17
M570.book Page 18 Thursday, June 10, 2010 12:00 PM
4. Position the battery cover over the battery
compartment. Align the case over the Battery
Latch, then in a single motion, press down and
snap the entire case over the compartment until
you hear a click.
䡲
Press along the entire edge of the cover to verify it
is securely in place.
WARNING: Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
Charging the Battery
Keeping track of your battery’s charge is important. If
your battery level becomes too low, your phone
automatically turns off, and you will lose any
information you were just working on.
Always use a Sprint-approved or Samsung-approved
desktop charger, travel charger, or vehicle power
adapter to charge your battery.
Tip: It is recommended that you completely charge your
battery first before using your phone. This guarantees you
begin using your phone with a fully charged battery.
䊳
18
2A. Phone Basics
Plug the flat end of the charger into the phone’s
charger jack and the other end into an electrical
outlet.
M570.book Page 19 Thursday, June 10, 2010 12:00 PM
With the Sprint-approved Li-Ion battery, you can
recharge the battery before it becomes completely run
down.
Navigating Through the Menus
Correct
Phone Basics
Note: Your phone’s Sprint One Click main screen gives
you instant access to your favorite features. See section
2B “Navigating the Main Screen” on page 42 for
complete information.
LED
Incorrect
Charger/Accessory Jack
A red indicator light means the battery is charging.
A green indicator light means the battery is at
least 90 percent charged.
䡲 A battery icon (
) indicates the current
charge level of the internal battery.
䡲
䡲
Menu navigation can be accomplished via either the
touch-sensitive navigation key or via the directional
keys on the QWERTY keyboard.
The navigation key on your phone lets you scroll
through and select onscreen items. Many menus
feature a scroll bar on the right to help you keep track
of your position in the menu.
For a diagram of your phone’s menu, please see “Your
Phone’s Menu” on page i.
2A. Phone Basics
19
M570.book Page 20 Thursday, June 10, 2010 12:00 PM
Selecting Menu Items Using the Navigation Key
Scrolling
Navigation Key
䡲
If the option is numbered, you can also select it by
pressing the corresponding number on the
phone’s keypad.
For example, to view your text messages:
1. From standby mode, scroll left or right to highlight
and then press
to access the main menu.
2. Scroll across the navigation key until Messages is
highlighted and press
.
3. Select Messages by highlighting it and then
pressing
. (If you have any text messages, they
are displayed.)
For the purposes of this guide, the above steps
condense into:
䊳
Directional Keys
Pressing
The navigation key acts as a dual touch-sensitive
mouse and OK/Enter key. As you navigate through a
menu, options are highlighted. Select any option by
highlighting it and pressing
.
20
2A. Phone Basics
Highlight
Messages.
and press
> Messages >
M570.book Page 21 Thursday, June 10, 2010 12:00 PM
Selecting Menu Items Using the Arrow Keys
Backing Up Within a Menu
As you navigate through a menu, options are
highlighted. Select any option by pressing a directional
arrow from the QWERTY keyboard and moving the
onscreen selection, highlighting it and pressing
.
䡲 If the option is numbered, you can select it by
pressing the corresponding number on the
phone’s keypad.
To go to the previous menu:
䊳
Press
.
To return to standby mode:
Press
.
Phone Basics
䊳
Displaying Your Phone Number
For example, to view your text messages:
1. From standby mode, press the left or right
directional keys to highlight
to access the main menu.
and then press
2. Press these keys and select Messages by
highlighting it and pressing
䊳
Highlight
and press
> Settings > Phone
Information > Phone Number/User ID. (Your phone
number and other information about your phone
and account will be displayed.)
.
3. Select Messages by highlighting it and
pressing
. (If you have any text messages, they
are displayed.)
2A. Phone Basics
21
M570.book Page 22 Thursday, June 10, 2010 12:00 PM
Making and Answering Calls
Dialing Options
Making Calls
When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone’s screen.
1. Enter a phone number from standby mode. (If you
make a mistake while dialing, press
the numbers.)
to erase
2. Press
. (To make a call when you are roaming
and Call Guard is enabled, press
and press
. See “Call Guard” on page 125.)
3. Press
when you are finished.
Tip: To redial your last outgoing call, press
To redial other recent numbers, press
number, and press
again.
twice.
, highlight a
When making calls off the Nationwide Sprint Network,
always dial using 11 digits (1 + area code + phone
number).
You can also place calls from your phone by speed
dialing numbers from your Contacts (page 30) and
using your History listings (page 64).
22
2A. Phone Basics
To send a message to the number, press SEND
MESSAGE (left softkey).
– or –
To initiate an option, press OPTIONS (right softkey), then
press the corresponding softkey.
䢇 Contact Details: Displays the details for a Contact if
the entered number matches a previously created
entry.
Tip: To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed dial
number is two digits, enter the first digit, and then press
and hold the second digit. (For information on setting up
speed dial numbers, see “Assigning Speed Dial
Numbers” on page 70.) (This feature will not work when
you are roaming off the Nationwide Sprint Network; when
roaming you must dial using eleven digits [1 + the area
code + the seven-digit phone number].)
M570.book Page 23 Thursday, June 10, 2010 12:00 PM
䢇
䢇
Save Contact: Allows you to save the phone number
in your Contacts. (See “Saving a Phone Number” on
page 27.)
Hard Pause: Enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input). To continue dialing, you
must press
. (See “Dialing and Saving Phone
Numbers With Pauses” on page 28.)
2-Sec Pause: Enter digits and then use this feature to
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See “Dialing and
Saving Phone Numbers With Pauses” on page 28.)
Answering Calls
1. Make sure your phone is on. (If your phone is off,
䢇
䢇
䢇
䢇
The phone rings or vibrates.
The indicator light flashes.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. You may also
see the caller’s phone number, if available.
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your
roaming charges when making or receiving calls while
outside the Nationwide Sprint Network. Please see
“Roaming” on page 123 for more information about
roaming.
䊳
incoming calls go to voicemail.)
2. Press
to answer an incoming call.
(Depending on your settings, you may also answer
incoming calls by opening the phone or by
pressing any number key.)
Select ANSWER to answer the call. (See “Call
Guard” on page 125 for additional information.)
Note: When your phone is off, calls go directly to voicemail
Ending a Call
䊳
Press
.
Your phone notifies you of incoming calls in the
following ways:
2A. Phone Basics
23
Phone Basics
䢇
M570.book Page 24 Thursday, June 10, 2010 12:00 PM
Missed Call Notification
䢇
When you do not answer an incoming call, your screen
displays the Missed Alerts Call log.
To display the Missed Call entry from the notification
screen:
䊳
Highlight the entry and press
phone number, press
.)
. (To dial the
䢇
䢇
Speaker On to activate speakerphone mode. (If you
are in speakerphone mode, the option is displayed
as Speaker Off to deactivate.)
Unlock Phone to unlock your phone (appears only if
the phone is locked).
Close Menu to close the pop-up menu (appears only
if the phone is unlocked).
Tip: Press My Phone (left softkey) to display your phone
number during an emergency call.
To display a Missed Call entry from standby mode:
1. Highlight
and press
2. Highlight an entry and press
> History.
.
Calling Emergency Numbers
You can place calls to 911 by dialing
), even if your phone is locked or your account is
restricted.
Note: When you place an emergency call, your phone
automatically enters Emergency mode.
During an emergency call, press OPTIONS (right
softkey) to display your options. Highlight an option and
press
.
24
2A. Phone Basics
To exit Emergency mode:
1. Press
until Emergency mode is exited.
Note: When you are in Emergency mode, you can exit by
pressing
then pressing
.
To deactivate the Emergency call in standby mode:
䊳
Press
until Emergency mode is exited.
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning
System (GPS) chip necessary for utilizing E911
emergency location services where available.
When you place an emergency 911 call, the GPS
feature of your phone seeks information to calculate
your approximate location. Depending on several
variables, including availability and access to satellite
signals, it may take up to 30 seconds or more to
determine and report your approximate location.
䢇
䢇
䢇
䢇
䢇
䢇
Important: Always report your location to the 911 operator
when placing an emergency call. Some
designated emergency call takers, known as
Public Safety Answering Points (PSAPs) may not
be equipped to receive GPS location information
from your phone.
䢇
In-Call Options
Pressing OPTIONS (right softkey) during a call displays
a list of available in-call features. To select an option,
press the corresponding keypad number or highlight
the option and press
. The following options may
be available through the Options menu:
䢇
䢇
䢇
Contact Details to display Contact information if the
number is saved in your Contacts.
Save to add the new number to your Contacts list.
3-way Call to initiate a three-way call. (For more
information, see “Making a 3-Way Call” on page 122)
Contacts to display your Contacts list.
Voice Memo allows you to record incoming audio
from your conversation. (For more information, see
“Managing Voice Memos” on page 88.)
Phone Info displays the following menu options:
䡲 Phone Number - your phone number
䡲 Icon Glossary - a list of currently available icons
䡲 Version - phone software version
䡲 Advanced - additional technical information
Key Mute/Unmute allows you to mute the key tones
from being heard by the caller.
Messaging accesses the Message menu options.
Recent History checks your call log for Recent calls.
You can also erase the logs from this menu.
Tools accesses the Tools menu options.
䡲 Calendar - your calendar entries
2A. Phone Basics
25
Phone Basics
M570.book Page 25 Thursday, June 10, 2010 12:00 PM
M570.book Page 26 Thursday, June 10, 2010 12:00 PM
䡲
Bluetooth - a list of current Bluetooth devices
䡲
Memo Pad - onscreen memo pad
䡲
Alarm - your Alarm events and menu
䡲
Calculator - onscreen calculator
Press MUTE (left softkey) during a call to mute the
microphone. Press UNMUTE (left softkey) to unmute the
microphone.
Using the Speakerphone
To use your phone handsfree or to share a call with
other people:
1. Place your phone in Speaker Mode by pressing
the Speaker key (
) until “Entering speaker
mode” appears in the display.
WARNING: Because of higher volume levels, do not place
the phone near your ear during speakerphone
use.
2. To disable Speaker Mode, press
until “Exit
speaker mode” appears in the display.
26
2A. Phone Basics
End-of-Call Options
After you receive a call from or make a call to a phone
number that is not in your Contacts, the phone displays
the phone number and the duration of the call.
䊳
Press OPTIONS (right softkey) > Save to add the
new number to your Contacts. (See “Saving a
Phone Number” on page 27.)
After you receive a call from or make a call to a phone
number that is already in your Contacts, the phone
displays the entry name, phone number, and the
duration of the call. Press OPTIONS (right softkey) >
Contact Details to view the Contacts listing for the
number.
Note: The End-of-Call options are not displayed for calls
identified as No ID or Restricted.
M570.book Page 27 Thursday, June 10, 2010 12:00 PM
You can store up to 1000 contact entries in total, with
each contact entry containing a maximum of seven
phone numbers for a total phone book capacity of
7000 numbers. Each entry’s name can contain 64
characters. Your phone automatically sorts the
Contacts entries alphabetically. (For more information,
see “2E. Contacts” on page 66.)
To save a number from standby mode:
1. Enter a phone number and press OPTIONS (left
softkey) > Save Contact.
2. Highlight New Entry or Existing Entry and
press
.
5. Press DONE (left softkey) to save the entry. You are
then notified if the number was successfully
added.
Finding a Phone Number
You can search Contacts for entries by name.
1. Press CONTACTS (right softkey) and enter the first
letter or letters of an entry. (The more letters you
enter, the more specific the search.)
2. To display an entry, highlight it and press
To dial a number, highlight it and press
.
.
You can also search Contacts by using a specific string
of numbers.
3. Highlight a label (Mobile, Home, Work, Pager, Fax,
or Other) and press
.
4. Enter the new contact name.
– or –
Search for an existing contact name.
2A. Phone Basics
27
Phone Basics
Saving a Phone Number
M570.book Page 28 Thursday, June 10, 2010 12:00 PM
1. Enter four or more
of the last digits in
standby mode.
(The more
numbers you
enter, the more
specific the search
becomes.)
䡲 Matching
Contacts entries
are displayed
within an
onscreen list.
2. To display the
Contacts entry that
contains the phone number you entered, highlight
the entry and press OPTIONS (right softkey) >
Contact Details.
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for
use with automated systems, such as voicemail or
credit card billing numbers.
There are two types of pauses available on your phone:
䢇 Hard Pause sends the next set of numbers when you
press
. (This is indicated with a p within the
number sequence.)
䢇 2-Second Pause automatically sends the next set of
numbers after two seconds. (This is indicated with a t
within the number sequence.)
Note: You can have multiple pauses in a phone number and
combine two-second and hard pauses.
To dial or save phone numbers with pauses:
– or –
1. Enter the phone number.
To dial the number, highlight the entry from the list
and press
.
2. Press OPTIONS (right softkey) > Hard Pause or
2-Sec Pause.
3. Enter additional numbers.
28
2A. Phone Basics
M570.book Page 29 Thursday, June 10, 2010 12:00 PM
to dial the number.
To place a call using Contacts Match Abbreviated Dialing:
– or –
1. Enter the last four to six digits of a Contacts entry’s
Press OPTIONS (right softkey) > Save Contact to
save the number in your Contacts.
2. Press
Note: When dialing a number with a hard pause, press
SEND TONES (left softkey) to send the next set of
numbers.
Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can
use either of the following abbreviated dialing features.
䢇 Contacts Match – Retrieve any number saved in your
Contacts by entering the last four digits of the
number. Press
to dial the retrieved number.
(See “To activate the Contacts Match feature:” on
page 57.)
䢇 Prepend/Abbreviated Dialing – Prepend the first five
or six digits (for example, the area code and prefix) to
any four or five digits you enter. Press
to dial the
resulting number. (See page 57 to register a prepend
number and activate the Prepend feature.)
phone number.
to call the displayed number. (If there is
more than one matched number in your Contacts,
your phone displays the Abbrev. Dial list. Highlight
a name and then press
to place a call.) (See
“Finding a Phone Number” on page 27.)
To place a call using Prepend Abbreviated Dialing:
1. Enter the last four or five digits of the number.
2. Press
.
Dialing From the Contacts List
1. Highlight
and press
> Contacts.
Shortcut: From standby mode, press CONTACTS (right
softkey) to list entries.
2A. Phone Basics
29
Phone Basics
4. Press
M570.book Page 30 Thursday, June 10, 2010 12:00 PM
2. Highlight the entry you want to call and press
to dial the entry’s default phone number.
– or –
To dial another number from the entry, highlight
the name and press
, and then highlight a
number and press
.
Speed Dialing
You can store up to 99 numbers in your phone’s speed
dial memory. Dial speed dial entries using one
keypress for locations 2–9 or two keypresses for
locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
䊳
Press and hold the appropriate key for
approximately two seconds. The display confirms
that you have dialed the number when it shows
“Calling...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
30
2A. Phone Basics
2. Press and hold the second digit for approximately
two seconds. The display confirms that you have
dialed the number when it shows “Connecting...”.
Plus (+) Code Dialing
When placing international calls, Plus Code Dialing
automatically enters the international access code for
your location (for example, 011 for international calls
made from the U.S.).
1. Press and hold
until you see a “+” on the
display screen.
2. Dial the country code and phone number, and
then press
. (The phone automatically
prepends the access code for international dialing,
followed by the country code and phone number.)
M570.book Page 31 Thursday, June 10, 2010 12:00 PM
Your phone provides convenient ways to enter letters,
numbers, and symbols whenever you are prompted to
enter text (for example, when adding a Contacts entry
or when using Sprint Mail and Text Messaging).
In this section we’ll cover the steps necessary to enter
text while the phone is in portrait mode where the
keypad is the primary method of both text and
character entry.
Selecting a Text Input Mode
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Text Mode to change the
text input mode.
2. Select one of the following options:
䡲
Predictive Text to enter text using a predictive text
system that reduces the number of keypresses
required while entering a word. (See page 32.)
䡲 Smiley’s to enter “emoticons.” (See page 33.)
䡲 Symbols to enter symbols. (See page 33.)
䡲
Text Settings to configure these options:
Auto-Capital, Auto-Space, Dual Language, Word
Choice List, Word Prediction, Word Completion, Use
My Words (See “Entering Numbers, Symbols,
Smileys and Preset Messages” on page 33.)
Tip: When entering text, press
to change letter
capitalization (ABC > Abc > abc).
Phone Basics
Entering Text in Portrait Mode
Selecting a Text Message Option
1. From a screen where you can enter text, press
OPTIONS (right softkey).
2. Select one of the following options:
䡲
Add Preset Message to enter preprogrammed
䡲
Add/Change Recipients to return to the Send to
messages. (See page 34.)
page and either add or change any previously
chosen recipients.
䡲 Add/Change Attachments to return to the Send to
page and either add or change any current
attached files. See “Composing Text/Picture
Messages” on page 119.
2A. Phone Basics
31
M570.book Page 32 Thursday, June 10, 2010 12:00 PM
Add/Change Subject Line to return to the Send to
page and either add or change the message
subject text.
䡲 Save as Draft to store the current message as a
draft for later modification and delivery.
䡲 Mark as Urgent to set a priority level of Urgent to
the outgoing message. This notifies any recipient
of the urgent read status for the outgoing
message.
䡲 Set Callback # to set the callback number seen by
text message recipients.
䡲
For complete information on text messaging, see
“Messaging (SMS/MMS)” on page 119.
Entering Text Using Predictive Text
Predictive Text lets you enter text by pressing keys just
once per letter. (To select this mode when entering text,
see “Selecting a Text Input Mode” on page 31.) This
input method uses an intuitive word database to analyze
the letters you enter and create a suitable word. (The
word may change as you type.)
32
2A. Phone Basics
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Text Mode > Predictive
Text > On to activate this input mode.
2. Press the corresponding keys once per letter to
enter a word. (For example, to enter the word “Bill,”
press) (If you make a mistake, press to erase a
single character. Press and hold to erase all
previously entered text.)
ABC Mode
In its default mode, also known as ABC or multi-tap
entry, you press keys one, two, three, or four times to
enter the letters you see on the keypad. For example,
press
once for “a,” twice for “b”, or three times for
“c”; or press
once for “p,” twice for “q,” three times
for “r,” or four times for “s.”
1. Press the corresponding keys repeatedly until
the correct letter appears. (For example, to enter
the word “Bill,” press
twice,
three
times,
three times, and
three times
again.) (If you make a mistake, press
to erase
a single character. Press and hold
to erase an
entire word.)
M570.book Page 33 Thursday, June 10, 2010 12:00 PM
Characters scroll in the following order:
Key
English Sequence
Lower Case
Upper Case
.? ! , - ' @ : / 1
abc2
ABC2
def3
DEF3
ghi4
GHI4
jkl5
JKL5
mno6
MNO6
pqrs7
PQRS7
tuv8
TUV8
wxyz9
WXYZ 9
Shift Caps Lock
Unshift
0
Space
Entering Numbers, Symbols, Smileys and
Preset Messages
To enter numbers:
䊳
Press the corresponding keys repeatedly until
the correct number appears. Pressing a key
multiple times cycles the characters through its
available set. Pressing
four times displays
the number two. (See “Selecting a Text Input
Mode” on page 31.)
Phone Basics
By default, the first letter of an entry is capitalized and
the following letters are lowercased. After a character is
entered, the cursor automatically advances to the next
space after two seconds or when you enter a character
on a different key.
To enter symbols:
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Text Mode > Symbols to
activate this input mode.
2. To enter a symbol, press the appropriate key
indicated on the display.
To enter “emoticons” (smileys):
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Text Mode > Smiley’s to
activate this input mode.
2. To enter a smiley/emoticon, press the appropriate
key indicated on the display.
2A. Phone Basics
33
M570.book Page 34 Thursday, June 10, 2010 12:00 PM
1. From a screen where you can enter text, press
To enter preset messages:
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Add Preset Message to
activate this input mode. (See “Selecting a Text
Input Mode” on page 31.)
2. Highlight a message and press
.
Note: Preset messages make composing text messages
easier by allowing you to enter quick messages, such
as “Meet me at,” “Let’s get lunch,” or a customized
message of your own. (For more information on preset
messages, please see “Managing Preset Messages”
on page 53.)
Setting Text Options
The Text Options menu allows you to specify more
automated features during the text entry process.
These options can help streamline the text entry
process by correcting for capitalization, spelling,
spacing, and completing the most commonly entered
words for you.
34
2A. Phone Basics
OPTIONS (right softkey) > Text Mode > Text Settings
and then use your navigation key to scroll down
the list and activate the desired text entry option:
䡲 Auto-Capital: allows you to turn on or off the
capitalization of the next character after a full stop
punctuation is followed by a space.
䡲 Auto-Space allows you to turn on or off the ability
to insert a space automatically after a word is
selected from the candidate list.
䡲 Dual Language allows you to select word
candidates to display in English only (None) or in
Spanish (Spanish).
䡲 Word Choice List allows you to display an
onscreen list of available word choices.
䡲 Word Prediction allows you to configure the phone
to display possible word candidates after a preset
number of characters have been entered.
䡲 Word Completion allows you to turn on or off the
ability to insert predictive words into the text.
䡲 Use My Words allows you to turn on or off the
ability to use words from your own custom
dictionary.
M570.book Page 35 Thursday, June 10, 2010 12:00 PM
Note: Yo can also access Text Entry options from the Settings
Entering Text in Landscape Mode
menu. Press Menu > Settings > Text Entry.
By enabling the Dual Language text option, you can
use the keys for both English and Spanish text entry. If
the Word Prediction and Word Completion text options
are enabled, the available word choices presented are
from both language sets (English/Spanish).
To enter characters in dual language mode:
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Text Mode > Text Settings
> Dual Language.
2. Select Spanish and press
. (See “Selecting a
Text Input Mode” on page 31.)
The Samsung Restore™ has a built-in, keyboard-style
keypad, referred to as a full QWERTY keyboard. The
keyboard is located beneath the display screen and is
accessed by sliding it open. This orients the phone's
display to landscape (widescreen) mode.
Using the QWERTY keyboard, you can type letters,
numbers, punctuation, and other special characters
into text entry fields or other applications simpler and
faster than using the telephone keypad.
To open the phone and access the keyboard:
1. Rotate the phone 90 degrees counter-clockwise.
2. Slide the top section of the phone up to open, as
To disable dual language mode:
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Text Mode > Text Settings
> Dual Language.
2. Select None and press
Accessing the QWERTY Keyboard
shown in the following illustration. When you slide
the phone open, the display rotates from a vertical
viewing mode (portrait) to a horizontal viewing
mode (landscape).
.
2A. Phone Basics
35
Phone Basics
Entering Characters In Dual Language
M570.book Page 36 Thursday, June 10, 2010 12:00 PM
Up
Up
Softkeys
Landscape
Left
Right
Down
Landscape
QWERTY
Keyboard
Directional
Keys
Navigation Key in Landscape Mode
Just as the screen orientation is changed, so is the
functionality of both the softkeys and the navigation key.
The Up/Down/Left/Right options of the navigation key
are also adjusted when the phone changes from
portrait to landscape modes.
36
2A. Phone Basics
Left
Right
Down
Portrait
Entering Text Using the Keyboard
Your phone’s keyboard provides a convenient way to
enter letters, numbers, and symbols whenever you are
prompted to enter text. Using your phone's keyboard is
just like using any standard computer keyboard, except
that here each key has a primary character in white on
the bottom (usually letters) and a secondary character
in red on the top (numbers and punctuation).
Secondary characters are accessed by first pressing
the Function key (
).
M570.book Page 37 Thursday, June 10, 2010 12:00 PM
Shift Key
Fn Key
Back/Delete Key
Keyboard Functions
Web – Launches an Internet connection.
Web Key Text Key
Space Key
Enter Key
The following keys perform special functions when
entering text:
Keyboard Functions
Sym – Launches the Symbols page.
Press
and
to choose from
onscreen symbols by using their
associated numbers.
Shift – Changes the text input mode
among Upper/Lower/Mixed case
modes. (Press twice to turn Shift lock
on.)
Text – Launches a new text message.
WWW – Inserts either a question mark
into your text or when used in
conjunction with
it inserts www..
Space – Inserts an empty space.
COM – Inserts either a period into your
text or when used in conjunction with
it inserts a .com.
OK/Enter – Accepts a change or option.
While entering text, moves the insertion
point to the next line in a message, like
the Enter key on a computer keyboard.
2A. Phone Basics
37
Phone Basics
Function – Allows you to enter the
numbers or characters displayed in blue
at the top of the QWERTY keys.
Examples: 1, $, %, #, !
(Press twice to turn Fn lock on.)
M570.book Page 38 Thursday, June 10, 2010 12:00 PM
Keyboard Functions
Back – Deletes the previous character,
similar to the backspace key on a
computer keyboard.
Smiley’s – Launches the Smiley’s page.
Choose from an extensive list of smiley’s
(emoticons). Use the left and right
navigation keys to scroll to the different
pages.
Using the Keyboard
Setting Text Options
The Text Mode menu allows you to specify more
automated features during the text entry process.
These options can help streamline the text entry
process by correcting for capitalization, spelling,
spacing, and completing the most commonly entered
words for you.
1. From a screen where you can enter text, press
OPTIONS (right softkey)
Note: When in Landscape mode, use the left and right
softkeys located below the LCD.
38
2A. Phone Basics
2. Use the navigation keys on the keyboard and press
or
䡲
to select the desired text entry option:
Text Mode provides access to Predictive text
Smiley’s, Symbols, and Text Settings.
● Predictive Text allows you to configure the
phone to display possible word candidates as
characters are entered.
䡲 Add Preset Message to enter preprogrammed
messages. (See page 41.)
䡲 Add/Change Recipients to return to the Send to
page and either add or change any previously
chosen recipients.
䡲 Add/Change Attachments to return to the Send to
page and either add or change any current
attached files.
䡲 Add/Change Subject Line to return to the Send to
page and either add or change the message
subject text.
䡲 Save as Draft to store the current message as a
draft for later modification and delivery.
M570.book Page 39 Thursday, June 10, 2010 12:00 PM
Mark as Urgent to set a priority level of Urgent to
the outgoing message. This notifies any recipient
of the urgent read status for the outgoing
message.
䡲 Set Callback # to set the callback number seen by
text message recipients.
3. Press
or
to store the new settings and
return to the message screen.
Press the desired letter keys to enter words.
Press
once to capitalize the next letter.
䡲
䡲
Press
䡲
Press
twice to turn on Shift (Caps) lock.
䡲
Press and hold
text.
or
keys:
B i l l
Entering Numbers and Punctuation
䊳
Entering Letters
䊳
Example: To enter the name "Bill," press the following
to erase the previous letter.
or
to erase all previous
Note: During text entry, a list of possible word choices is
displayed. If your desired word is listed, select the entry
from the list and press
to insert the selected word
into your message.
Phone Basics
䡲
Press
and then press the key with the
desired character displayed on top.
䡲 For example, to enter 9, press
and then
press
.
To enter only the top row of characters, double press
to fix all consecutive characters.
Example: To enter “9:30,” you would use the keyboard
sequence shown below.
9:30
2A. Phone Basics
39
M570.book Page 40 Thursday, June 10, 2010 12:00 PM
Note: In some applications, certain fields may default to
entering numbers (such as the phone number fields in
Contacts). In others, you will need to use
to enter
numbers.
To enter symbols:
1. With the cursor in the desired location,
press
Example: Here's an example showing how to enter a
combination of letters and numbers.
>
.
2. Press the numeric key corresponding to the
desired symbol.
Note: You can exit from the Symbols page by pressing any
keyboard key or
.
To enter smiley’s:
1. With the cursor in the desired location, press
2. Press the numeric key corresponding to the
desired smiley or emoticon.
B I L L IS #1
Entering Symbols and Smiley’s
Symbols and Smiley’s (emoticons) are entered by
accessing onscreen menus and touching the desired
item.
40
2A. Phone Basics
To edit specific text using the onscreen navigation keys:
䊳
Use the navigation keys to place your cursor in the
desired location.
䡲 If you make a mistake, press
to reveal the
keyboard and press
to erase a single
character.
䡲 Press and hold
to erase an entire word or all
entered characters.
.
M570.book Page 41 Thursday, June 10, 2010 12:00 PM
To enter preset messages:
1. From a screen where you can enter text, press
OPTIONS (right softkey) > Add Preset Message to
activate this input mode. (See “Selecting a Text
Input Mode” on page 31.)
or
.
Phone Basics
2. Highlight a message and press
Returning to Portrait Mode
When you close the QWERTY keyboard, the display
screen will revert back to Portrait mode until you
slide the keyboard back open.
2A. Phone Basics
41
M570.book Page 42 Thursday, June 10, 2010 12:00 PM
2B. Navigating the Main
Screen
The Sprint One Click Main Screen
Tiles
⽧
Getting to Know Sprint One Click (page 42)
⽧
Personalizing the Carousel (page 44)
Softkeys
(Landscape)
Carousel
Getting to Know Sprint One Click
Sprint One Click brings all your favorite features to your
fingertips. Instead of navigating through the levels of a
traditional phone menu, this design puts the things you
need the most – features like text messaging, Internet
access, and GPS navigation – right up front. Not only
can you access what you need right away, you get to
choose what and where it all goes.
Using the Sprint One Click main screen is easy once
you’ve learned a few basics.
42
2B. Navigating the Main Screen
Navigation
Key
Left
Softkey
Menu/OK
Key
Right
Softkey
The illustration above shows the basic layout of your
phone’s main screen, also known as the standby
screen. The callouts highlight what you’ll need to know
to get started with Sprint One Click.
䢇 Carousel – The carousel is the bottom row of tiles, or
icons, on your main screen. Using the navigation key
(Optical Joystick) left or right moves the carousel.
The tile in the center is the selected tile, and it’s menu
M570.book Page 43 Thursday, June 10, 2010 12:00 PM
䢇
Softkeys: Press the left or right softkey (while in
Portrait or Landscape modes) to perform the
action or access the menu indicated by the text
directly above it on the display.
䡲 End/Power key (
): Press from any menu or
tile to return to the Home (
) screen.
䡲
Take the Tutorial
Your phone has a built-in menu of tutorials to teach
you all you need to know about Sprint One Click.
1. Highlight
and press OPTIONS (left softkey) >
Tutorial.
– or –
Select
(Personalize My Phone) > Tutorial.
2. Highlight a topic and press
to display the
tutorial.
䡲 Topics include: Getting Started, Changing the
Carousel, Adding a Tile, Removing a Tile, Alerts and
Notifications, Dismissing, and Finding Dismissed.
Tip: To see a full menu of tutorials when viewing another topic
in the tutorial, press INDEX (left softkey).
2B. Navigating the Main Screen
43
Main Screen Navigation
䢇
is displayed. In the illustration, the Home tile (
) is
in the center, so the Home screen is displayed.
Tiles – The tiles are the individual icons on the
carousel. Each tile displays a specific menu, such as
Messaging and Internet. The carousel can hold up to
15 tiles, which you can add, remove, and rearrange
to suit your needs. The Home tile (
) provides
access to the phone’s full menu, and it is the only
one that cannot be moved or removed.
Function Keys – The keys you’ll use to navigate
through the main screen are:
䡲 Navigation key (Menu/OK): The navigation key
doubles as a touch-sensitive optical joystick and
OK Key.
● Use the Optical Joystick to move the carousel
and select tiles. Selected tiles occupy the
center position. Scroll across the Optical
Joystick up or down to highlight bubbles
(Home screen only) or menu items.
● Press to select highlighted menu items. From
the Home (
) screen, press
to display
the phone’s full menu.
M570.book Page 44 Thursday, June 10, 2010 12:00 PM
Personalizing the Carousel
Now that you know what the carousel is, it’s time to
make it work for you by adding, removing, or
rearranging tiles to match how you want to use your
phone.
Adding a Tile to the Carousel
1. Highlight
and press OPTIONS (left softkey) >
Personalize Carousel.
2. Press Add Tile (left softkey), select a tile category
(New, All, News & Sports, Communicate & Tools,
Web& Communities, Social Networks, Entertainment
& Games, Money & Weather, or Green) and then
highlight a tile.
3. To add the tile, press ADD (left softkey) or
press
. (To view a preview, press PREVIEW
[right softkey].)
Note: Tile categories and available tiles are continually being
updated, and there are dozens of tiles to choose from.
The following table shows a sampling of the default tiles
that may be preloaded on your phone.
44
2B. Navigating the Main Screen
Sprint One Click Tiles
Home – View Home screen and bubbles.
Press
to access the phone’s full menu.
Messaging – Access Voicemail, Send Message,
Text Message, Picture Mail, and Email. See “3A.
Sprint Service: The Basics” on page 116.
My Account – Access links to Account Details
Web page, Hear Minutes, and Hear Balance.
Sprint Zone – Access links to Sprint Zone
services like Games & Apps, My Stuff, and other
Promotional Content. See “Downloading
Games, Ringers, and More” on page 138.
Personalize My Phone – Access Change Screen
Saver, Change Ringer, Personalize Carousel,
and Tutorial.
Shortcuts – Add and access up to five shortcuts
from My Stuff, My Album, Web Bookmarks, and
Menu Items.
MySpace – Access to your MySpace page. See
“MySpace” on page 146.
M570.book Page 45 Thursday, June 10, 2010 12:00 PM
Sprint One Click Tiles
Yahoo – Access links to Yahoo services such as
Mail, Mobile Homepage, News and Address
Book.
Twitter – Access your Twitter page and chat
online with friends via “tweets”. See “Twitter” on
page 148.
Facebook – Access your Facebook page and all
your friends. See “Facebook” on page 147.
Internet – Access data services, including the
Sprint home page, Favorites, Recent Pages, the
Enter Web Address menu, and Google search.
See “Launching a Web Connection” on
page 128.
Removing a Tile From the Carousel
1. Highlight
and press OPTIONS (left softkey) >
Personalize Carousel.
2. Scroll the navigation key left or right to select a tile,
and then highlight Remove Tile and press
.
Shortcut: From the main screen, highlight a tile and press
Sprint Navigation – Access Sprint Navigation,
including Drive To, Search, Maps & Traffic, and
Share & More. See “3D. GPS Navigation” on
page 162.
OPTIONS (left softkey) > Remove Tile. Remember
that you cannot remove, move, or replace the
Home tile.
Google – Get easy access to all your favorite
Google services such as Google search, online
Maps, Gmail™, and YouTube™. See “Google” on
page 142.
2B. Navigating the Main Screen
45
Main Screen Navigation
Best of Green – Access a collection of green,
earth-friendly information including access to:
Five Simple Things, Green Guides, Green
Glossary, and All Things Green. See “Best of
Green” on page 148.
Sprint One Click Tiles
M570.book Page 46 Thursday, June 10, 2010 12:00 PM
4. To replace the previous tile, press REPLACE (left
Rearranging Tiles on the Carousel
softkey) or press
1. Highlight
and press OPTIONS (left softkey) >
Personalize Carousel.
OPTIONS (left softkey) > Replace Tile, and then
complete steps 3 and 4.
2. Scroll the navigation key left or right to select a tile,
and then highlight Move Tile and press
.
3. Scroll the navigation key left or right to select a
location, and then press INSERT (left softkey)
or
to place the tile.
OPTIONS (left softkey) > Move Tile, and then
complete step 3.
1. Highlight
2. Scroll the navigation key left or right to select a tile,
and then highlight Edit Tile and press
If your carousel is full or if you just want to swap out
one tile for another, you can replace an existing tile with
another.
and press OPTIONS (left softkey) >
Personalize Carousel.
2. Scroll the navigation key left or right to select a tile,
and then highlight Replace Tile and press
46
2B. Navigating the Main Screen
and press OPTIONS (left softkey) >
Personalize Carousel.
Replacing Tiles on the Carousel
3. Select a tile category and then highlight a tile.
Editing Tiles
Certain tiles, such as Shortcuts, contain editable
content. You can use the Personalize Carousel menu
to edit these tiles.
Shortcut: From the main screen, highlight a tile, press
1. Highlight
to place the tile.
Shortcut: From the main screen, highlight a tile, press
.
.
3. Use your navigation key and function keys to edit
the tile.
Shortcut: From the main screen, highlight a tile, press
OPTIONS (left softkey) > Edit Tile, and then
complete step 3.
M570.book Page 47 Thursday, June 10, 2010 12:00 PM
Resetting One Click
To reset the one click carousel to the original default
settings:
1. Highlight
and press OPTIONS (left softkey) >
Reset One Click.
.
Main Screen Navigation
2. Highlight Yes and press
2B. Navigating the Main Screen
47
M570.book Page 48 Thursday, June 10, 2010 12:00 PM
Selecting Ringer Types
2C. Settings
Your phone provides a variety of ringer options that
allow you to customize your ring and volume settings.
These options allow you to identify incoming calls by
the ring.
⽧
Sound Settings (page 48)
1. Highlight
⽧
Display Settings (page 50)
2. Select the entry for which you want to add a ringer
⽧
Location Settings (page 52)
⽧
Messaging Settings (page 53)
⽧
Airplane Mode (page 54)
⽧
TTY Use With Sprint Service (page 55)
⽧
Phone Setup Options (page 56)
⽧
Security Settings (page 57)
Sound Settings
Ringer Types
Ringer types help you identify incoming calls and
messages. You can assign ringer types to individual
Contacts entries, types of calls, and types of messages.
48
2C. Settings
and press
> Settings > Ringers.
type (Incoming Calls [Contact Entries, Unsaved
Numbers, Private/Unknown], Voicemail, Messages,
Alarm/Calendar, Power Up/Down, and Battery Alert).
3. Highlight a ringer type (Downloaded, Preloaded, or
No Ringer).
4. Highlight the file and press
to assign a ringer.
Getting New Ringers
A wide variety of new ringers is available from the
Sprint Digital Lounge, and you can access them right
from your phone. (Additional charges may apply, but
some are free.)
M570.book Page 49 Thursday, June 10, 2010 12:00 PM
1. Highlight
and press
> My Stuff > Ringers >
3. Using the navigation or volume keys, choose a
volume level and press
Get New Ringers.
2. Use your navigation key to search through
available ringers. When you find one you want,
highlight it and press
.
3. To make a purchase, highlight Buy and press
.
Tip: You can adjust the ringer volume in standby mode (or
the earpiece volume during a call) by using the volume
button on the left side of your phone.
.
䡲
(Your phone automatically downloads the ringer.)
4. When the download is finished, select an option to
continue:
Listen to listen to the ringer.
䡲 Set As to assign the ringer to a call or message
type or to a specific contact.
䡲 Shop to browse for other items to download.
Select Always Vibrate (or VIB ON [left softkey]) if
you wish the phone to vibrate in addition to
ringing at the selected volume setting.
Vibrate
䡲
Adjust your phone’s volume settings to suit your needs
and your environment.
1. Highlight
and press
> Settings > Volume.
2. Select Incoming Ringer Volume, Playback Volume, or
䊳
With the phone open, press the volume button
down in standby mode until you see “Vibrate All”
on the screen.
To set your phone always to vibrate in addition to any ringer
settings:
1. With the phone open, press the volume button up
or down in standby mode until a volume setting
appears on the screen.
Key Beeps.
2C. Settings
49
Settings
Adjusting the Phone’s Volume Settings
To set your phone to vibrate instead of making any sounds:
M570.book Page 50 Thursday, June 10, 2010 12:00 PM
2. Press VIB ON (left softkey) to check the Always
Vibrate option. (If you have already checked the
option, pressing VIB OFF (left softkey) deselects the
option.)
Silence All
To activate Silence All:
With the phone open, press and hold the volume
button down in standby mode. (You will see
“Silence All.”)
To deactivate Silence All:
䊳
Press the volume button up repeatedly to select a
volume level.
Selecting a Key Tone
and press
Key Beeps.
50
Tone Type to select the sound of a keypress
(Lucid, DTMF, or Voice).
䡲
Tone Volume to select a keypress volume level.
2C. Settings
menus and press
.
Display Settings
Changing the Backlight Time Length
Select how long the display screen remains backlit or
when the backlight turns off after you press any key.
To adjust the Backlight dimming feature:
1. Highlight
and press
> Settings > Display >
Backlight Control > Backlight Dim.
2. Select a time setting and press
Your phone offers a number of options for selecting the
audible tones accompanying a keypress.
1. Highlight
.
䡲
3. Highlight an available option from one of the above
The Silence All option allows you to mute all sounds
without turning your phone off.
䊳
2. Highlight an option and press
> Settings > Volume >
䡲
.
Select Slide Open, 8 seconds, 15 seconds,
30 seconds, or Always Dim.
Note: Long backlight settings reduce the battery’s talk and
standby times.
M570.book Page 51 Thursday, June 10, 2010 12:00 PM
2. Choose where to obtain the image from (No Image,
To adjust the Backlight Off feature:
1. Highlight
and press
> Settings > Display >
Backlight Control > Backlight Off.
2. Select a time setting and press
Select 1 minute, 30 seconds, or 15 seconds.
an image, use your navigation key to scroll through
and view other available images.)
3. Highlight an image and press
to assign it.
To adjust the Java Backlight feature:
– or –
Select how long the display screen remains backlit
while in a Java application.
To make an online image purchase, highlight Buy
and press
. (Your phone automatically
downloads the image). For more information on
downloading images, see “Downloading Games,
Ringers, and More” on page 138.)
1. Highlight
and press
> Settings > Display >
Backlight Control > Java Backlight.
2. Select a time setting and press
䡲
.
4. Press ASSIGN (left softkey) to assign an image.
Select Default or Continuous.
Changing the Display Screen
Choose what you see on the display screen while
powering on or off and when in standby mode (screen
saver).
1. Highlight
Screen Saver.
and press
> Settings > Display >
Changing the Brightness
Adjust your screen’s brightness (contrast) to suit your
surroundings.
1. Highlight
and press
> Settings > Display >
Brightness.
2. Scroll your navigation key left or right to adjust the
screen contrast and press
softkey).
or press DONE (left
2C. Settings
51
Settings
䡲
.
Take New Picture, My Albums, Downloaded, or
Preloaded) and press
to view it. (Once you see
M570.book Page 52 Thursday, June 10, 2010 12:00 PM
Location Settings
Activating the PowerSave Mode
1. Highlight
and press
> Settings > Display >
PowerSave Mode.
2. Highlight either On or Off and press
.
The Location feature allows the network to detect your
position. Turning Location off will hide your location
from everyone except 911.
Changing the Phone’s Menu Style
Choose the layout of your phone’s menu.
1. Highlight
and press
Note: Turning Location on will allow the network to detect
.
2. Press the left softkey to toggle between these
options.
䡲
GRID VIEW to view the menu as a grid.
䡲
LIST VIEW to display the menu as a list.
Display Language
and press
> Settings > Others >
Language.
2. Highlight English or Español and press
52
2C. Settings
your position using GPS technology, making some
Sprint applications and services easier to use. Turning
Location off will disable the GPS location function for all
purposes except 911, but will not hide your general
location based on the cell site serving your call. No
application or service may use your location without
your request or permission. GPS-enhanced 911 is not
available in all areas.
To enable your phone’s Location feature:
You can choose to display your phone’s onscreen
menus in English or in Spanish.
1. Highlight
Your phone is equipped with a Location feature for use
in connection with location-based services.
.
1. Highlight
and press
> Settings > Location.
(You will see the Location disclaimer.)
2. Read the disclaimer and press OK (left softkey).
3. Highlight On or Off and press
softkey).
> DONE (left
M570.book Page 53 Thursday, June 10, 2010 12:00 PM
When you turn the Location feature on, the phone
displays the
icon. When you turn Location off, the
phone displays the
icon.
Messaging Settings
Setting Message Notification
When you receive a message, your phone notifies you
by displaying an icon on your display screen. You can
also choose to be notified with a message notification
on your display screen.
> Messages >
and press
> Messages >
Settings > Signature > On. (If you do not wish to
attach a signature, select Off.)
2. Enter a signature and press
. (See “Entering
Text in Portrait Mode” on page 31 or See “Entering
Text in Landscape Mode” on page 35.)
Managing Preset Messages
Your phone is loaded with 20 preset messages to help
make sending text messages easier. Customize or
delete these messages, such as “Where are you?,”
“Let’s get lunch,” and “Meet me at” to suit your needs,
or add your own messages to the list.
To edit or delete a preset message:
1. Highlight
and press
> Messages >
Settings > Preset Messages. (You will see the list of
preset messages.)
Settings > Notification.
2. Select Message & Icon or Icon Only.
2C. Settings
53
Settings
Messaging settings allow you to decide how you would
like to be notified of new messages, create a signature
with each sent message, and create your own preset
messages.
and press
Add a customized signature to each message you
send.
1. Highlight
Your phone’s advanced messaging capabilities let you
send and receive many different kinds of text
messages without placing a voice call. (For more
information, see “Accessing Messages” on page 135.)
1. Highlight
Adding a Customized Signature
M570.book Page 54 Thursday, June 10, 2010 12:00 PM
2. Select EDIT (left softkey) to edit the message (see
“Entering Text in Portrait Mode” on page 31 or see
“Entering Text in Landscape Mode” on page 35),
and press
.
3. To delete a single message, highlight it and press
OPTIONS (right softkey) > Delete.
– or –
To delete all current preset messages, select
OPTIONS (right softkey) > Delete All to delete the
messages. (Select CLOSE (right softkey) to cancel
the deletion.)
and press
These settings allow you to configure the options
associated with a text message sent from your phone.
These options include:
䡲 Callback Number - allows you to set the callback
number for the recipient to view when receiving a
text message.
To activate a callback number:
4. Highlight
and press
> Messages >
Settings > Callback Number.
5. Select None, <your phone number>, or Other.
To add a new preset message:
1. Highlight
Other Text Message Settings
> Messages >
Settings > Preset Messages. (You will see the list of
Airplane Mode
preset messages.)
2. To add a new message, select OPTIONS (right
softkey) > Add New.
3. Enter your message and press
. (Your new
message will be added to the beginning of the list.)
54
2C. Settings
Airplane Mode allows you to use many of your phone’s
features, such as Games, Notepad, and Voice Memos,
when you are in an airplane or in any other area where
making or receiving calls or data is prohibited. When
you set your phone to Airplane Mode, it cannot send or
receive any calls or access online information.
M570.book Page 55 Thursday, June 10, 2010 12:00 PM
and press
> Settings > Others >
Airplane Mode.
To turn TTY Mode on or off:
1. Highlight
and press
> Settings > Others >
TTY Options. (An informational message will be
2. Read the disclaimer and press OK (left softkey).
3. Highlight On or Off or On Power Up and press
displayed.)
.
While in Airplane Mode, your phone’s standby screen
will display “Phone off.”
2. Press DONE (left softkey).
3. Select TTY Off to turn TTY mode off.
– or –
TTY Use With Sprint Service
A TTY (also known as a TDD or Text Telephone) is a
telecommunications phone that allows people who are
deaf, hard of hearing, or who have speech or language
disabilities, to communicate by telephone.
Your phone is compatible with select TTY devices.
Please check with the manufacturer of your TTY device
to ensure that it is compatible with digital cell phones.
Your phone and TTY device will connect via a special
cable that plugs into your phone’s headset jack. If this
cable was not provided with your TTY device, contact
your TTY device manufacturer to purchase the
connector cable.
Touch any of the following to enable the feature:
● TTY Full, TTY + Talk, or TTY + Hear.
To access the state Telecommunications Relay Service
(TRS) for assistance with TTY calls:
䊳
Dial
reach an operator.
and press
to
For additional information about Sprint Relay Services
and TTY compatibility, call Sprint Relay Customer
Service at 800-676-3777 or visit www.sprintrelay.com.
Settings
1. Highlight
For additional technical support you may call
1-888-987-4357, or access the following website:
www.samsung.com/us/consumer/learningresources/
mobile/accessibility/pop_accessibility.html.
2C. Settings
55
M570.book Page 56 Thursday, June 10, 2010 12:00 PM
Note: In TTY Mode, your phone will display the TTY access
Phone Setup Options
icon.
If TTY mode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be
impaired.
WARNING: 911 Emergency Calling
Sprint recommends that TTY users make
emergency calls by other means, including
Telecommunications Relay Services (TRS),
analog cellular, and landline communications.
Wireless TTY calls to 911 may be corrupted
when received by public safety answering points
(PSAPs), rendering some communications
unintelligible. The problem encountered appears
related to software used by PSAPs. This matter
has been brought to the attention of the FCC,
and the wireless industry and the PSAP
community are currently working to resolve this.
Main Screen Shortcuts
Your phone’s Sprint One Click main screen lets you
customize your phone and provides quick access to
the features and functions you use most. See
“Personalizing the Carousel” on page 44 for details.
Your phone offers you the option of assigning shortcuts
to favorite or often-used functions. Pressing the
navigation key to the assigned direction in standby
mode will launch your personally designated shortcuts.
To create a new Shortcut:
1. Highlight
> Add Shortcut and press
2. Select from one of the following categories: My
Stuff, My Album, Bookmark, or Menu Item.
3. Press ASSIGN (left softkey) to make the new
shortcut assignment.
56
2C. Settings
.
M570.book Page 57 Thursday, June 10, 2010 12:00 PM
To select a current Shortcut:
1. Highlight
Tip: To make an Abbreviated Dial call, see “Abbreviated
to access the Shortcuts menu.
2. Using the navigation key, select a current shortcut
and press
3. Press
.
to return to the standby mode.
Dialing” on page 29.
Note: This setting does not apply to 911 or Sprint 411.
Security Settings
Setting Abbreviated Dialing
To activate the Contacts Match feature:
and press
> Settings > Others >
Contact Match.
When your phone is locked, you can only receive
incoming calls or make calls to 911, Sprint Customer
Service, or special numbers.
2. Select On or Off.
To activate the Prepend feature:
1. Highlight
and press
Abbreviated Dialing.
> Settings > Others >
2. Select On.
3. Enter the first five- or six-digit prefix in the ABBREV.
DIAL field and then press DONE (left softkey).
䡲
Locking Your Phone
To deactivate this feature, select Off during step 2
above.
1. Highlight
and press
> Settings > Lock
Phone > Lock Now.
Note: Your current Lock Code is displayed at the top of the
screen. If you decide to change it, you must select
Change Lock Code (page 58).
Settings
1. Highlight
Your Phone’s Lock Feature
Unlocking Your Phone
1. From standby mode, press UNLOCK (left softkey).
2. Enter your lock code.
2C. Settings
57
M570.book Page 58 Thursday, June 10, 2010 12:00 PM
2. Select Delete Stuff and select an option.
Changing the Lock Code
1. Highlight
and press
> Settings > Lock
Phone and enter your lock code.
2. Select Change Lock Code.
3. Enter your new lock code and press
.
4. Re-enter your new lock code and press
.
Calling in Lock Mode
You can place calls to 911 and to your special
numbers when in lock mode.
䊳
To call an emergency number, special number, or
Sprint Customer Service, enter the phone number
and press
.
Deleting Phone Content
Use the Reset/Delete menu to quickly erase all the
content you have created or stored in your phone.
1. Highlight
and press
> Settings >
Reset/Delete and enter your lock code.
58
2C. Settings
Text Messages to erase all text messages from
your phone.
䡲 Call Logs to erase your entire call log (history)
from your phone.
䡲 Cookies and Cache to erase all your website
cookies and Internet page/content cache from
your phone.
䡲 Downloaded Content to erase all downloaded
content from your phone.
䡲 Contacts to erase all from your phone.
䡲 Pictures/Videos to erase all pictures and videos
stored on your phone.
䡲
Note: This does not affect those image and videos stored on
the microSD card.
3. Press DELETE (left softkey) to confirm the deletion.
Resetting Your Phone’s Settings
Resetting the phone settings only restores all of the
factory defaults, including the ringer types and display
settings. Onboard data such as Contacts, History, and
Messaging are not affected.
M570.book Page 59 Thursday, June 10, 2010 12:00 PM
and press
> Settings >
Reset/Delete.
Enabling and Disabling Data Services
2. Enter your lock code.
3. Highlight Reset Settings and press
.
Note: If Parental Control has been enabled, this code will also
need to be entered before continuing.
4. Press RESET (left softkey) to reset the phone’s
settings.
Resetting Your Phone
Resetting the phone restores all of the factory defaults,
including the ringer types and display settings and
deletes all content stored on the phone.
1. Highlight
and press
> Settings >
Reset/Delete and enter your lock code.
2. Enter your new lock code.
3. Highlight Reset Phone and press
.
4. Press RESET (left softkey) to restore your phone to
its factory default state.
Security Features for Data Services
You can disable data services without turning off your
phone; however, you will not have access to all data
services, including Web and messaging. Disabling
data services will avoid any charges associated with
these services. While signed out, you can still place or
receive phone calls, check voicemail, and use other
voice services. You may enable data services again at
any time.
To disable data services:
1. Highlight
and press
> Settings > Others >
Data > On/Off. (You will see a message.)
2. Select NEXT (left softkey) > Disable Sprint Data
Services to confirm that you want to sign out and
deactivate data.
To enable data services:
1. Highlight
and press
> Settings > Others >
Data > Off. (A message is displayed.)
2. Highlight Connect > Yes and press
to enable
data services.
2C. Settings
59
Settings
1. Highlight
M570.book Page 60 Thursday, June 10, 2010 12:00 PM
Net Guard
When you first connect to the Web, the Net Guard will
be displayed to confirm that you want to connect. This
feature helps you avoid accidental connections. You
can disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
䊳
Highlight
and press
> Settings > Others >
Data > Net Guard.
䡲
䡲
Select On to activate the Net Guard.
Select Off to deactivate the Net Guard.
Note: When enabled, the Net Guard appears only once as
long as you have not turned the phone off and on.
Using Parental Controls
You can disable certain phone services without turning
off your phone. You can restrict access to all data
services, including Web and messaging.
Disabling data services will avoid any charges
associated with these services. While signed out, you
can still place or receive phone calls, check voicemail,
60
2C. Settings
and use other voice services. You may enable data
services again at any time.
New Parental Controls provide restrictions to various
phone services such as Voice, Messaging, Data, and
Camera.
These restrictions are governed by an independent
Parental Code that is separate from the previously
mentioned Lock code.
To enable Parental Controls:
1. Highlight
and press
> Settings > Parental
Controls.
2. Highlight On/Off and press
3. Highlight On and press
.
.
4. If this is your first time to setup these controls, you
will be asked to setup a parental lock code that
manages the areas that will be locked via this
menu.
䡲 Enter a new four-digit code and press
.
䡲 Re-enter the new code and press
and press
DONE (left softkey).
M570.book Page 61 Thursday, June 10, 2010 12:00 PM
To disable Parental Controls:
1. Highlight
and press
> Settings > Parental
Controls.
2. Enter your new parental lock code.
3. Highlight On/Off and press
4. Highlight Off and press
.
.
4. Highlight On or Off and press
Configuring Restrictions
5. Press
and press
.
to return to the previous page.
Changing the Parental Control Code
To disable data services:
1. Highlight
Web to restrict access to all data features such as
Internet, Video Streaming, and other data usage.
䡲 Camera/Camcorder to restrict access to both the
Camera and Camcorder functionality.
䡲 Force Location On to restrict access to the
Location functionality.
䡲
> Settings > Parental
Controls > Restrictions.
2. Read the onscreen disclaimer and press
CONTINUE (left softkey).
1. Highlight
and press
> Settings > Parental
Controls > Change Parental Control Code.
2. Enter your current four-digit code.
3. Enter a new four-digit code.
3. Select any of the following entries to either activate
or deactivate an option.
Voice Calls to lock the phone and prevent
outgoing calls. Incoming calls can still be
received.
䡲 Text Messaging to restrict access to the
Messaging folder, including all Text and Picture
messages.
Settings
䡲
2C. Settings
61
M570.book Page 62 Thursday, June 10, 2010 12:00 PM
2D. History
⽧
Viewing History (page 62)
⽧
History Options (page 63)
⽧
Making a Call From History (page 64)
⽧
Saving a Number From History (page 64)
⽧
Erasing History (page 65)
When you place, accept, or miss a call, a record of the
call is saved in the Recent History list. When you view
the numbers in this list, the phone icon to the left of the
number indicates the call type:
䡲 Missed: Indicates any missed calls.
䡲 Received: Indicates any received calls that were
answered.
䡲 Dialed: Indicates all outgoing calls made from
your phone.
Viewing History
History is a list of the last 240 phone numbers for calls
you placed, accepted, or missed. History makes
redialing a number fast and easy. It is continually
updated as your phone automatically adds new
numbers to the beginning of the list and removes the
oldest entries from the bottom of the list.
62
2D. History
Missed Call
Received Call
Dialed Call
M570.book Page 63 Thursday, June 10, 2010 12:00 PM
1. Highlight
and press
> History.
2. Highlight an entry and press
Shortcut: You can also press
.
from standby mode to
display your recent calls.
History Options
Highlight a History entry from the Recent History screen
and press
to display the date and time of the call,
the phone number (if available), and the caller’s name
(if the number is already in your Contacts).
1. Highlight
and press
> History.
2. Press SEND MSG (left softkey) to send the currently
selected history entry a new text message.
Note: You may also be able to access History from your
phone’s man screen carousel. See section 2B
“Navigating the Main Screen” on page 42 for details.
History records only calls that occur while the phone is
turned on. If a call is received while your phone is
turned off, it will not be included in history.
If you return a call from the voicemail menu, it will not be
included in your phone’s history.
– or –
Highlight an entry and press OPTIONS (right
softkey) to display the following options:
䡲 New Group to save the current history entry to a
new group.
䡲 Save to save the number if it is not already in your
Contacts. (See “Saving a Number From History”
on page 64.)
䡲 Contact Details to display the Contact entries’
details.
䡲 Delete to delete the entry.
䡲 Delete All to delete all History entries.
2D. History
63
History
Each entry contains the phone number (if it is
available) and Contacts entry name (if the number is in
your Contacts). Duplicate calls (same number and type
of call) may only appear once on the list.
M570.book Page 64 Thursday, June 10, 2010 12:00 PM
Tip: You can also view the next History entry by scrolling the
navigation key down or view the previous entry by
scrolling the navigation key up.
1. Highlight a History entry and press OPTIONS (right
softkey) > Save.
2. Highlight New Entry or Existing Entry and
press
Making a Call From History
.
3. Highlight a label (Mobile, Home, Work, Pager, Fax,
or Other) and press
1. Highlight
and press
2. Highlight an entry and press
> History.
.
Note: You cannot make calls from History to entries identified
as No ID or Restricted.
Tip: Press
from the standby screen to also bring up the
Recent History screen where you can then select an
entry.
Saving a Number From History
Your phone can store up to 1000 Contacts entries.
Contacts entries can store up to a total of 7000 phone
numbers, and each entry’s name can contain 64
characters.
64
2D. History
.
4. Use the keypad or keyboard to type in the new
entry name.
– or –
Highlight an existing Contacts entry and press
5. Make any other selection or entries for this new
Contact.
6. Press DONE (left softkey) to save the new entry to
your Contacts list and exit.
After you have saved the number, your phone displays
the new Contacts entry. (See “Contacts Entry Options”
on page 68.)
Note: You cannot save phone numbers already in your
Contacts or from calls identified as No ID or Restricted.
.
M570.book Page 65 Thursday, June 10, 2010 12:00 PM
Erasing History
1. Highlight
and press
History
To erase individual History entries, see “History
Options” on page 63.
> History.
2. Press OPTIONS (right softkey) > Delete All.
3. If you are certain you want to erase the History,
press DELETE (left softkey).
– or –
Select CANCEL (right softkey) to return to the
previous menu.
2D. History
65
M570.book Page 66 Thursday, June 10, 2010 12:00 PM
Adding a New Contacts Entry
2E. Contacts
Your phone can store up to 1000 Contacts entries.
Contacts entries can store up to a total of 7000 phone
numbers, and each entry’s name can contain 64
characters.
⽧
Adding a New Contacts Entry (page 66)
⽧
Adding a New Group (page 67)
⽧
Saving a Phone Number (page 67)
⽧
Contacts Entry Options (page 68)
⽧
Editing a Contacts Entry (page 68)
⽧
Adding a Number to a Contacts Entry (page 69)
⽧
Editing a Contacts Entry’s Numbers (page 69)
⽧
Deleting a Contact (page 70)
⽧
Assigning Speed Dial Numbers (page 70)
⽧
Selecting a Ringer Type for an Entry (page 71)
⽧
Assigning a Picture to an Entry (page 72)
⽧
Finding Contacts Entries (page 72)
⽧
Secret Contacts Entries (page 73)
4. Enter a phone number and press
⽧
Dialing Sprint Services (page 73)
5. Highlight a label for the entry (Mobile, Home, Work,
⽧
Wireless Backup (page 74)
66
2E. Contacts
1. Highlight
and press
> Contacts > Add
New.
Note: Press CONTACTS (right softkey) from the main screen
to access the Contacts page.
Shortcut: Enter the phone number in standby mode and
press OPTIONS (right softkey) > Save. Proceed
with step 2.
2. Select New Contact to create a new Contacts entry.
3. Enter a name for the new entry and scroll the
navigation key down. (See “Entering Text in Portrait
Mode” on page 31 and “Entering Text in
Landscape Mode” on page 35.)
Pager, Fax, or Other) and press
.
.
M570.book Page 67 Thursday, June 10, 2010 12:00 PM
4. Add multiple entries (two or more) to your new
After saving the number, your phone displays the new
entry. (See “Contacts Entry Options” on page 68.)
Tip: ICE – In Case of Emergency
To make it easier for emergency personnel to identify
important contacts, you can list your local emergency
contacts under “ICE” in your phone’s Contacts list. For
example, if your mother is your primary emergency
contact, list her as “ICE–Mom” in your Contacts. To list
more than one emergency contact, use “ICE1–___,”
“ICE2–___,” etc.
Adding a New Group
group by highlighting a name from the list and
pressing
. This action places a check mark
alongside the name.
5. Press CONTINUE (left softkey) and enter a name for
the new group and scroll the navigation key down.
6. Press SAVE (left softkey) to assign the selected
entries to the new group.
Contacts
6. Press DONE (left softkey).
Saving a Phone Number
To save a number from standby mode:
1. Enter a phone number and press OPTIONS (right
Groups allow you to communicate simultaneously by
sending out a broadcast text message to every
member of a current group.
1. Highlight
and press
> Contacts > Add
New.
2. Select New Group to create a new Group category.
3. Read the onscreen information and press START
(left softkey).
softkey) > Save Contact.
2. Highlight New Entry or Existing Entry and
press
.
3. Highlight a label for the entry (Mobile, Home, Work,
Pager, Fax, or Other) and press
.
4. Enter a name for the new entry and scroll the
navigation key down. (See “Entering Text in Portrait
Mode” on page 31 and “Entering Text in
Landscape Mode” on page 35.)
2E. Contacts
67
M570.book Page 68 Thursday, June 10, 2010 12:00 PM
5. Press DONE (left softkey).
䢇
Contacts Entry Options
䢇
To display a Contacts entry:
1. Highlight
and press
䢇
> Contacts.
2. Highlight an entry and press
to view the
䢇
Contact Details menu.
Tip: You can view the next entry by scrolling the navigation
key right or view the previous entry by scrolling the
navigation key left.
To access a Contacts entry’s options:
Display an entry from the Contact Details page and
press OPTIONS (right softkey) > Edit Contact.
Highlight an option and press
.
[Contact Image] to edit the image associated with the
contact entry.
[Contact Name] to edit the contact entry name.
[Current number] to edit the entry phone number.
䊳
䢇
䢇
䢇
68
2E. Contacts
䢇
䢇
䢇
䢇
䢇
䢇
[Add Number] to add a phone number to the entry.
(See “Adding a Number to a Contacts Entry” on
page 69.)
[E-mail] to add an email address to the entry.
[IM] to add an Instant Messenger address to the
entry.
[Ring] to assign a preprogrammed or downloaded
ringer.
[URL] to add a website’s URL to the entry.
[Address] to add a physical address to the entry.
[Birthday] to add Birthday information to the entry.
[Memo] to add a note, street address, or other
information.
[Job Title] to add Job Title information to the entry.
[Company] to add Company information to the entry.
Editing a Contacts Entry
1. Display a Contacts entry (see “Contacts Entry
Options” on page 68) and press OPTIONS (right
softkey) > Edit Contact.
M570.book Page 69 Thursday, June 10, 2010 12:00 PM
2. Highlight the information you wish to edit (Name,
.
3. Add or edit the information and press
to clear one digit at a time, or press
hold to erase the entire number.
. Press
and
(left softkey) to save your changes.
Other options include: Hard Pause, 2sec Pause,
Set # Type, and Set as Main #.
1. Display a Contacts entry (see page 68) and press
OPTIONS (right softkey) > Edit Contact.
Adding a Number to a Contacts
Entry
2. Highlight a number and press
digit at a time, or press and hold
entire number.
1. Display a Contacts entry’s Contact Details menu.
(See “Contacts Entry Options” on page 68.)
to clear one
to erase the
3. Re-enter or edit the number and press
.
4. Highlight a label for the number and press
2. Press OPTIONS (right softkey) > Edit Contact >
.
– or –
[Add Number].
4. Highlight a label for the number and press
䡲
to return the EDIT
Editing a Contacts Entry’s Numbers
4. Re-enter or edit any number and press DONE
3. Enter the new phone number and press
ASSIGN (right softkey) or
CONTACT screen.
Press OPTIONS > Set # Type, highlight the desired
label and press
.
.
.
5. Press DONE (left softkey) to save the new number.
5. Press DONE (left softkey) to save the number.
– or –
– or –
Press OPTIONS (right softkey) > Set Speed Dial to
assign a speed dial location, and then press
2E. Contacts
69
Contacts
Number, Ringer, etc.) and press
M570.book Page 70 Thursday, June 10, 2010 12:00 PM
6. Press DONE (left softkey) to save the new number.
– or –
Press OPTIONS (right softkey) > Set Speed Dial to
assign a speed dial location, and then press
ASSIGN (right softkey) or
to return the EDIT
CONTACT screen.
䡲 Other options include: Hard Pause, 2sec Pause,
Set # Type, and Set as Main #.
Deleting a Contact
You can assign speed dial numbers when you add a
new Contacts entry, when you add a new phone
number to an existing entry, or when you edit an
existing number.
To assign a speed dial number to a new phone number:
1. Add a phone number to a new or to an existing
Contacts entry. (See “Adding a New Contacts
Entry” on page 66 or “Adding a Number to a
Contacts Entry” on page 69.)
2. Highlight the recently added number and press
OPTIONS (right softkey) > Set Speed Dial.
1. Display a Contacts entry. (See “Contacts Entry
Options” on page 68.)
2. Select OPTIONS (right softkey) > Delete Contact.
3. Select DELETE (left softkey) to confirm the deletion.
Assigning Speed Dial Numbers
3. Highlight an available speed dial location and
press ASSIGN (right softkey) to return the EDIT
CONTACT screen.
To assign a speed dial number to an existing phone
number:
1. Display a Contacts ‘s Contact Details screen (see
page 68).
Your phone can store up to 99 phone numbers in
speed dial locations. (For details on how to make calls
using speed dial numbers, see “Speed Dialing” on
page 30.)
70
2E. Contacts
2. Highlight an existing entry’s phone number and
press OPTIONS (right softkey) > Set Speed Dial.
M570.book Page 71 Thursday, June 10, 2010 12:00 PM
press ASSIGN (right softkey).
4. Press DONE (left softkey) to return to the Contacts
Details menu.
Note: If you attempt to assign an already in-use speed dial
location to a new phone number, you will see a
message asking if you wish to replace the existing
speed dial assignment. Press REPLACE to assign the
location to the new phone number and delete the
previous speed dial assignment.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer
Types” on page 48.)
1. Display a Contacts entry’s Contacts Details menu
and press OPTIONS (right softkey) > Edit Contact.
2. Highlight the current ring type and press
to
display the Ringer Type menu.
3. Select a ringer menu, such as Get New Ringers,
Finding Speed Dial Numbers
Default Ringer, Downloaded Ringers, Other Ringers,
My Videos, or No Ringer.
1. Highlight
and press
> Contacts >
OPTIONS (right softkey) > Settings > Speed
Numbers.
4. Scroll through available ringers. (To hear a sample
ringer, highlight a ringer type.)
2. Scroll through speed dial entries. Speed dial
5. Highlight a ringer and press
numbers are displayed in numeric order.
.
– or –
6. Press DONE (left softkey) to save the new ringer
Enter the number of a speed dial location using
your keypad.
Tip: If you select Get New Ringers, you can purchase and
3. To display an entry, highlight it and press
Contacts
3. Highlight an available speed dial location and
.
type.
download new ringers right from your phone. For details,
see “Getting New Ringers” on page 48 and
“Downloading Games, Ringers, and More” on page 138.
2E. Contacts
71
M570.book Page 72 Thursday, June 10, 2010 12:00 PM
Assigning a Picture to an Entry
Finding Contacts Entries
Assign a picture to display each time a certain contact
calls you.
Finding Contacts by Name
1. Display a Contacts entry’s Contacts Details screen
and press OPTIONS (right softkey) > Edit Contact.
2. Highlight the current image or picture type and
press
to display the Contact ID menu.
3. Select an option, such as Get New Screen Savers,
None, New Picture, My Albums, or Screen Savers.
4. Highlight a picture and press
twice to assign it.
䡲 If you selected New Picture, the camera will
launch and you will use it to take a new picture.
(See “2I. Camera” on page 97 for details.)
䡲 If you selected My Albums, you may need to select
In Phone, or Memory Card to find the picture.
5. Press DONE (left softkey) to save the assigned
picture.
1. Highlight
and press
> Contacts.
2. Scroll through all the entries.
– or –
Enter the first letter or letters of a name (such as
“dav” for “Dave”). (The more letters you enter, the
more your search narrows.)
3. To display an entry, highlight it and press
.
4. To dial the entry’s default phone number,
press
.
– or –
To display additional Contacts entries, press the
navigation key left or right.
Finding Group Entries
1. Highlight
and press
> Contacts.
2. Scroll through the group titles. To display entries
belonging to a group, highlight the group and
press
.
72
2E. Contacts
M570.book Page 73 Thursday, June 10, 2010 12:00 PM
and press
.
4. To dial the entry’s default phone number,
press
.
– or –
To display additional Group entries, scroll the
navigation key left or right.
To make an entry public:
1. Highlight a Contacts entry and press OPTIONS
(right softkey) > Set as Not Secret.
2. Press DONE (left softkey) to save the new setting.
Tip: If you can’t recall your lock code, try using the last four
digits of your wireless phone number. If this doesn’t work,
call Sprint Customer Service at 1-888-211-4727.
Secret Contacts Entries
Dialing Sprint Services
Making an entry secret hides its phone number(s) and
requires your lock code to edit the entry.
Your Contacts list is preprogrammed with contact
numbers for various Sprint services.
To make an entry secret:
To dial a service from your Contacts:
1. Highlight a Contacts entry and press OPTIONS
(right softkey) > Set as Secret.
2. Press DONE (left softkey) to save the new setting.
1. Highlight
and press
highlight an entry.
Contacts
3. To display an entry within the group, highlight it
> Contacts and
2. Press OPTIONS (right softkey) > Settings > Services
and select an available service, such as Account
Info, Customer Service, Directory Assistance (Sprint
411), Sprint Operator, or Voice Command.
2E. Contacts
73
M570.book Page 74 Thursday, June 10, 2010 12:00 PM
To dial a service from standby mode using your keypad:
䊳
Dial the appropriate service number:
䡲 Sprint Customer Service –
䡲 Sprint 411 –
䡲 Account Info. –
䡲 Sprint Operator –
Activating and Deactivating Wireless Backup
To activate the wireless backup service:
1. Highlight
and press
> Settings > Others >
Wireless Backup > SUBSCRIBE (left softkey). (The
phone prompts you to confirm your license status.)
2. Press DONE (left softkey) and follow the onscreen
instructions to purchase the license.
Wireless Backup
This feature allows you to back up all of your contacts
to the Sprint website and restore them if your phone is
lost, stolen, damaged, or replaced.
Tip: To use the wireless backup service, you are required to
activate the service from your phone.
To subscribe to the wireless backup service, you must
purchase a license to use the service through your
phone’s browser. The license expires after a set period
of time and you must renew it regularly. As part of the
initial subscription process, the service generates a
random wireless backup password. The service sends
the password to your phone as a text message.
74
2E. Contacts
3. Please wait while registering the license. (You will
see a confirmation screen once registration is
complete.)
Note: Once you have completed the registration, you will
receive a text message with your password. This
password is required for the Wireless Backup website
(www.wirelessbackup.sprint.com) in order to edit your
contacts from your computer.
Tip: Each time you edit Contacts on your phone, they are
backed up at www.wirelessbackup.sprint.com.
M570.book Page 75 Thursday, June 10, 2010 12:00 PM
To deactivate the wireless backup service:
1. Highlight
and press
> Settings > Others >
Wireless Backup > UNSUBSCRIBE > Done (left
softkey).
(A message is displayed.)
Tip: To display the wireless backup information, highlight
> Settings > Others > Wireless
and press
Backup > Learn More. When the service is available,
you can also select Troubleshoot to display the
troubleshooting guide.
2. Follow the onscreen instructions to unsubscribe
Contacts
from the wireless backup service.
Note: You can unsubscribe from the wireless backup service
only through the Sprint website.
Viewing Your Wireless Backup Status
䊳
Highlight
and press
> Settings > Others >
Wireless Backup > View Status.
Setting the Wireless Backup Alert
This feature turns the pop-up alert on or off when a
wireless backup update has been completed.
1. Highlight
and press
> Settings > Others >
Wireless Backup > Alerts.
2. Select Alert me or No alerts.
2E. Contacts
75
M570.book Page 76 Thursday, June 10, 2010 12:00 PM
Calendar
2F. Calendar & Tools
⽧
Calendar (page 76)
⽧
File Manager (page 80)
⽧
Alarm Clock (page 81)
⽧
Memo Pad (page 82)
⽧
Calculator (page 83)
⽧
Tip Calculator (page 83)
⽧
Eco Calculator (page 83)
⽧
World Clock (page 84)
⽧
Updating Your Phone (page 84)
⽧
Updating the PRL (page 84)
Adding an Event to the Calendar
Your Calendar helps organize your time and reminds
you of important events.
1. Highlight
and press
> Tools > Calendar >
Personal Calendar > Scheduler.
2. Highlight the day to which you would like to add an
event and press OPTIONS (right softkey) >
Add New.
Tip: Scroll the navigation key up or down to scroll by week
through the Scheduler.
3. Enter the event title and press NEXT (left softkey).
4. Select a category for the event by highlighting the
category field:
Select Appointment, Personal, Business, Birthday,
or Vacation.
䡲
76
2F. Calendar & Tools
M570.book Page 77 Thursday, June 10, 2010 12:00 PM
5. Select an alarm time for the event by highlighting
the alarm field:
䡲 Select No Alarm, On Time, 10 Min. Before, 30 Min.
Before, or 1 Hour Before.
6. Highlight a recurrence cycle for the event:
Select Once, Daily, Weekly, Monthly, or Yearly.
䡲
.
Highlight a ringer category (Downloaded,
Preloaded, or No Ringer) and then a ringer and
press
.
To silence the alarm and reset the schedule, press
8. Select a Start and End time for the event by
highlighting the time field and pressing
.
䡲 Using your keypad or navigation keys, set the start
and end times for the event and press
.
䡲 Change the AM/PM entry by pressing AM/PM
(right softkey).
9. Select a single optional contact for the event by
highlighting Go to Contact and pressing
.
Highlight a contact from the list and press
check the box. Press ASSIGN (left softkey).
䡲
10. Press DONE (left softkey) to save the event.
When your phone is turned on and you have an event
alarm scheduled, your phone alerts you and displays
the event summary. There are several ways your phone
alerts you to scheduled events:
䢇 By playing the assigned ringer type.
䢇 By illuminating the backlight.
䢇 By flashing the LED.
.
To view additional options, press the appropriate
softkey:
䢇 SNOOZE silences the alarm and schedules it to
replay again in 10 minutes.
䢇 View view the alarm details screen.
䢇 DISMISS (right softkey) displays the event detail
screen.
Calendar / Tools
䡲
7. Highlight the ringer field and press
Event Alert Menu
Viewing Events
to
1. Highlight
and press
> Tools > Calendar >
Personal Calendar > Scheduler.
2F. Calendar & Tools
77
M570.book Page 78 Thursday, June 10, 2010 12:00 PM
2. Highlight the day for which you would like to view
events and press
. (Your phone lists events in
chronological order.)
Tip: In the calendar view, days with events scheduled are
4. Press EDIT (left softkey). Follow the onscreen
procedures to alter any of the previously
configured fields.
5. Press DONE (left softkey) to store any updates.
outlined.
3. To display an event’s details, highlight it and
press
.
1. Highlight
Going to the Current Day’s Calendar Menu
䊳
Highlight
and press
> Tools > Calendar >
Personal Calendar > Today.
Editing a Day’s Events
1. Highlight
and press
> Tools > Calendar >
Personal Calendar > Scheduler.
2. Highlight the day containing the previously created
event and press
. (Days containing an event
are indicated within a red box.)
3. Highlight the event from the Schedule tab listing
and press
78
Erasing a Day’s Events
.
2F. Calendar & Tools
and press
> Tools > Calendar >
Personal Calendar > Scheduler.
2. Highlight the day for which you would like to erase
events and press
.
Tip: In the calendar view, days with events scheduled are
outlined.
3. Highlight an event and press OPTIONS (right
softkey) > Delete. (You will see an alert notifying
you of the number of events you will erase.)
4. Select YES (left softkey) or NO (right softkey).
Erasing All Events
1. Highlight
and press
> Tools > Calendar >
Personal Calendar > Scheduler > OPTIONS (right
softkey) > Delete All. (You will see an alert.)
M570.book Page 79 Thursday, June 10, 2010 12:00 PM
Note: If the day for which you are erasing events contains a
repeating event, you will receive the following prompt:
“Delete all events?”
2. Select YES (left softkey) to erase all events or NO
(right softkey) to return to the calendar view.
> Tools > Calendar >
Personal Calendar > Task List.
Note: If there are no tasks saved, the NEW TASK screen is
automatically displayed.
2. Press ADD NEW (left softkey).
3. Enter the task name using either the keypad or
keyboard and press NEXT (left softkey).
4. Select a priority level by highlighting the Priority
field.
䡲 Scroll the navigation key left or right to select Low
or High.
field.
Using your keypad and/or navigation key, set the
date.
䡲
7. Press DONE (left softkey) to save and exit.
Creating a Countdown
This option allows you to enter a timer that counts
down to an event based on a date and time specified.
1. Highlight
and press
> Tools > Calendar >
Personal Calendar > Task List.
Note: If there are no countdowns saved, the NEW
COUNTDOWN screen is automatically displayed.
2. Press ADD NEW (left softkey).
3. Enter the countdown name using either the
keypad or keyboard and press NEXT (left softkey).
2F. Calendar & Tools
79
Calendar / Tools
This option allows you to manage daily tasks that
include dates, times, and priority levels.
and press
Using your keypad and/or navigation key, set the
alarm time.
䡲 Change the AM/PM entry by pressing AM/PM
(right softkey).
䡲
6. Select a due date by highlighting the Due date
Managing the Task List
1. Highlight
5. Select a due time by highlighting the Due time field.
M570.book Page 80 Thursday, June 10, 2010 12:00 PM
4. Select a time by highlighting the Time field.
Using your keypad and/or navigation key, set the
time for the countdown.
䡲 Change the AM/PM entry by pressing AM/PM
(right softkey).
䡲
Phone to access files stored in your phone’s
䡲
Memory Card to access files stored on the
memory.
䡲
5. Select a date by highlighting the Date field.
䡲
Using the keypad, enter the date of the
countdown.
6. Press DONE (left softkey) to save and exit.
microSD card.
Opening Files in File Manager
1. Highlight
and press
> Tools > Mass
Storage > File Manager > Phone or Memory Card.
2. Highlight an folder and press
3. Highlight an item and press
File Manager
File Manager Options
File Manager allows you to manage files such as
pictures, videos, music, and applications stored in your
phone or on the microSD card. See “Connecting Your
Phone to Your Computer” on page 95.
Accessing File Manager
1. Highlight
and press
> Tools > Mass
Storage > File Manager.
2. Highlight an option and press
80
2F. Calendar & Tools
.
.
.
When viewing files or folders in File Manager, press
OPTIONS (right softkey) to display available options.
Highlight an option and press
to select it.
䢇 Send to send the currently selected file via either
Email or Bluetooth.
䢇 Delete to delete a file or folder from File Manager.
䢇 Copy to copy a file from the current folder to another
folder in your phone.
䢇 Move to move a file from the current folder to another
folder in your phone.
M570.book Page 81 Thursday, June 10, 2010 12:00 PM
Rename to change the name of a selected file.
䢇
Create Folders to create preset folders on the
䢇
䢇
䢇
microSD card. (See “Creating Folders in the microSD
Card” on page 93.)
Sort to sort folder contents by Name, Date, or Type.
Memory Info to display the memory information for a
selected location (All, Phone, or Card).
Find to search for a file within the current folder
location.
Alarm Clock
4. Select a time for the alarm by highlighting the Time
field.
Using your keypad or navigation key, set the
alarm time.
䡲 Change the AM/PM entry by pressing AM/PM
(right softkey).
䡲
5. Select a ringer type for the alarm by highlighting
the ringer field and pressing
.
Highlight and available ringer category
(Downloaded, Preloaded, or No Ringer) and
press
.
䡲
Calendar / Tools
䢇
6. Select a repeating status for the alarm by
Your phone comes with a built-in alarm clock that has
multiple alarm capabilities.
1. Highlight
and press
> Tools > Alarm.
Note: If there are no tasks saved, press Create New
(left softkey).
2. Press OPTIONS (right softkey) > Create New.
3. Turn the alarm on or off by highlighting the Alarm
field and scrolling the navigation key left or right.
highlighting the repeat field and pressing
.
Highlight Daily, Once, or Sunday – Saturday and
press
.
䡲
7. Select a snooze interval for the alarm by
highlighting the Snooze Interval field and scrolling
your navigation key left or right.
䡲 Choose either: Off, 5 minutes, 10 minutes,
15 minutes, or 20 minutes.
2F. Calendar & Tools
81
M570.book Page 82 Thursday, June 10, 2010 12:00 PM
8. Select a volume level for the alarm by highlighting
the Volume field and scrolling your navigation key
left or right.
䡲 Choose from: Level 1 - Level 8.
9. Press DONE (left softkey) to save and exit.
To read a saved note:
1. Highlight
To compose a note:
1. Highlight
and press
2. Highlight a note and press
Your phone comes with a notepad that you can use to
compose and store reminders and notes to help keep
you organized.
and press
> Tools > Memo Pad.
Note: If there are no memos saved, Empty appears on the
MEMO PAD screen.
2. Press ADD NEW (left softkey).
3. Type your note using the keypad or keyboard and
press DONE (left softkey). (See “Entering Text in
Portrait Mode” on page 31 or “Entering Text in
Landscape Mode” on page 35.)
> Tools > Memo Pad.
.
To edit a note:
1. Highlight
Memo Pad
and press
2. Highlight a note and press
> Tools > Memo Pad.
.
3. Press EDIT (left softkey).
4. Press
to erase a single character. Press and
hold
to erase an entire word.
䡲 On the QWERTY keyboard, you can use
.
5. Type your note using either the keypad or
keyboard and press or DONE (left softkey). (See
“Entering Text in Portrait Mode” on page 31 or
“Entering Text in Landscape Mode” on page 35.)
To delete all saved notes:
1. Highlight
and press
> Tools > Memo Pad.
2. Highlight a note and press OPTIONS (right softkey)
> Delete All.
3. Select YES (left softkey) or NO (right softkey).
82
2F. Calendar & Tools
M570.book Page 83 Thursday, June 10, 2010 12:00 PM
3. If you’re splitting the check, highlight # Paying and
Your phone comes with a built-in calculator.
1. Highlight
and press
> Tools > Calculator >
Calculator.
2. Enter numbers using your keypad.
Press
to enter decimal points.
䡲 Scroll
to change the sign from positive to
negative, and multiply or divide.
䡲 Press CLEAR (right softkey) to clear the values.
䡲
3. Press
for the total.
and press
Eco Calculator
This calculator can assist you in determining fuel
economy.
To create a new Eco calculation:
1. Highlight
and press
> Tools > Calculator >
Eco Calculator.
2. Press CREATE (left softkey).
– or –
Tip Calculator
1. Highlight
enter the number of people in your party. (The
application calculates and displays an equal split.)
Calendar / Tools
Calculator
Press OPTIONS (right softkey) > Create.
> Tools > Calculator >
Tip Calculator.
2. Use your keypad/keyboard and navigation key to
enter the bill amount and tip percentage. (The
application instantly calculates the correct tip.)
Note: If there are no Eco calculations saved, the Eco
Calculator screen is empty.
3. Use your keyboard and navigation keys to enter
the distance, price of gas/gallon, and number of
gallons. (The application instantly calculates the
fuel efficiency values.)
2F. Calendar & Tools
83
M570.book Page 84 Thursday, June 10, 2010 12:00 PM
3. Once downloaded, press INSTALL (left softkey) to
World Clock
To view the time in over 50 different locations:
1. Highlight
and press
complete the installation process. (You may be
required to power your phone off and back on to
complete the software upgrade.)
> Tools > World Time.
2. Use the navigation key left or right to scroll through
Updating the PRL
different cities and time zones.
3. Press SET DST (left softkey) to turn daylight saving
time on or off.
This option allows you to download and update the
PRL (preferred roaming list) automatically.
1. Highlight
Updating Your Phone
and press
> Tools > Update
Phone > Update PRL.
2. Follow the onscreen instructions.
The update phone option allows you to download and
update the software in your phone automatically. Only
the internal software is updated; no Contacts entries or
other information saved to your phone will be deleted.
1. Highlight
and press
> Tools > Update
Phone > Update Firmware.
2. Follow the onscreen instructions. (Your phone
automatically downloads any available updates.)
84
2F. Calendar & Tools
M570.book Page 85 Thursday, June 10, 2010 12:00 PM
2G. Voice Services
want to use. To complete your task, simply follow the
voice prompts.
Available ASR commands include:
Call <Name or#> to call an entry in your Contacts
list or a spoken phone number. (See “Making a
Voice Call With ASR” on page 86.)
䢇 Send Message <Name or #> to launch text
messaging on your phone and specify a recipient for
a new message. (See “Send a Text Message” on
page 86.)
䢇 Lookup <Name> to lookup a Contacts entry name
from your current list of available contacts. (See
“Opening Menus With ASR” on page 87.)
䢇 Go To <menu> to jump directly to menu items or
applications. (See “Opening Menus With ASR” on
page 87.)
䢇 Check <item> to check your phone’s status. (See
“Checking Phone Status Using ASR” on page 87.)
⽧
Automatic Speech Recognition (ASR) (page 85)
⽧
Managing Voice Memos (page 88)
Automatic Speech Recognition
(ASR)
You can use your phone’s built-in automatic speech
recognition (ASR) software to dial a phone number in
your Contacts or to launch phone functions. All you
have to do is to talk into the phone, and ASR will
recognize your voice and complete tasks by itself.
Activating ASR
䊳
Press and hold
or
.
The screen displays “Say a command” and the phone
prompts you to say the name of the command you
Tip: Use ASR in a quiet environment so it can accurately
recognize your commands.
During ASR operation, press Tutorial (left softkey) to get
instructions using the software.
2G. Voice Services
85
Voice Services
䢇
M570.book Page 86 Thursday, June 10, 2010 12:00 PM
Making a Voice Call With ASR
1. Press and hold
or
.
2. If you hear “Say a command,” say “Call.”
3. If the location is not recognized or the name does
not have a number stored in Contacts, your phone
will play the message “No match found, Try
Again?”
4. If you hear “Say the name or number,” say a name
or a phone number.
5. If you hear “Which location?,” say a number type
(for example, “Mobile”).
Tip: You can skip steps 4 and 5 by saying a name and
location after “Call” without pausing (for example, “Call
John Jones mobile1”).
Note: If ASR does not recognize the name or number, it will
find the most likely matches and display a list of up to
three names or numbers. You will hear “Did you say…”
followed by the name or number. You can confirm by
saying “Yes.” Say “No” to change the selection.
Send a Text Message
Use automatic speech recognition to launch text
messaging on your phone and specify a recipient for
the message.
1. Press and hold
2G. Voice Services
.
2. Say “Send Message” followed immediately by the
name of a person in your Contacts list and,
optionally, the type of number (Mobile1, Home1,
etc.) you want to send it to. For example, say “Send
Message John Smith Mobile1.”
If you do not specify the number type and there are
multiple numbers for the name, your phone chooses
the mobile number by default.
If you say “Send Message” without specifying a
recipient, your phone prompts you with “Say the name
or number.” Say the name of a person in your Contacts
list and, optionally, the type of number.
3. Use either the keypad or keyboard to enter text and
press SEND (left softkey) to complete the process.
Selecting OPTIONS (right softkey) provide you
with additional message selections. See
“Messaging (SMS/MMS)” on page 119.
䡲
86
or
M570.book Page 87 Thursday, June 10, 2010 12:00 PM
Look Up a Contacts Entry
Checking Phone Status Using ASR
Look up and display contact information for any person
stored in your Contacts list by saying “Contacts”
followed by the name.
You can use ASR to obtain information about your
phone:
䢇 Status (all of the previous except My Phone Number)
or
.
2. Say “Lookup John Smith.” The entry information for
the specified contact is then displayed.
If you say only “Lookup” your phone prompts you with
“Say the name.”
Opening Menus With ASR
You can jump directly to many menu items or
applications by saying “Go to” followed by a menu
option.
1. Press and hold
or
.
2. If you hear “Say a command,” say “Go To.”
3. If you hear “Which shortcut?,” say an application
name (for example, “Messages”).
4. The phone opens the selected menu.
䢇
Time
䢇
Signal Strength
Network
Battery
䢇
䢇
䢇
My Phone Number
1. Press and hold
or
.
2. If you hear “Say a command,” say “Check.”
3. If you hear “Which status item?,” say a command.
ASR Options
To change ASR confirmation:
1. Press and hold
or
.
2. Press SETTINGS (right softkey) > Confirmation and
select an option.
Automatic to ask for confirmation only when the
system is not sure what you said.
䡲
2G. Voice Services
87
Voice Services
1. Press and hold
M570.book Page 88 Thursday, June 10, 2010 12:00 PM
䡲
Always Confirm to always ask for confirmation.
䡲
Never Confirm to never ask for confirmation.
To adapt the system to your voice:
1. Press and hold
or
.
2. Press SETTINGS (right softkey) > Adaptation >
Adapt Voice.
3. Press START (left softkey) and repeat each word,
Managing Voice Memos
Use your phone’s Voice Services to record brief
memos to remind you of important events, phone
numbers, or grocery list items.
Recording Voice Memos
1. Highlight
phrase, or telephone number you hear.
or
.
2. Press SETTINGS (right softkey) > Adaptation >
Reset Voice > YES (left softkey).
To change the ASR mode:
1. Press and hold
To end the recording of your memo:
䊳
Press
or FINISH (right softkey).
To record a conversation during a phone call:
1. During a call, press OPTIONS (right softkey)
or
.
2. Press SETTINGS (right softkey) > Audio Modes and
select an option.
Expert Mode to sound a beep only.
䡲 Prompt Mode to prompt for required information.
䡲
88
> Tools > Voice Memo
2. Begin recording after the prompt.
To reset the adaptation:
1. Press and hold
and press
> Record.
2G. Voice Services
> Voice Memo. (A one-minute counter [
] is
displayed on the screen indicating the amount of
time a single voice memo can be recorded.)
Note: Incoming audio is recorded when Voice Memo is
selected during a call.
M570.book Page 89 Thursday, June 10, 2010 12:00 PM
Erasing Voice Memos
To end the recording of your conversation:
Press
or STOP (right softkey).
To erase all voice memos:
Note: Your phone can store a total of 10 one-minute memos.
OPTIONS (right softkey) > Delete All.
1. Highlight
and press
> Tools > Voice Memo
> Review. (The phone displays a list of saved
memos, with the first one selected.)
.
– or –
Press the number corresponding to the memo you
want to review.
conversation are shown in the list with the phone
number used during the recording process.
> Tools > Voice Memo
2. Highlight the desired memo to erase and press
To play the voice memos you have recorded:
Note: Voice Memos recorded from a direct phone
and press
> Review.
Voice Memo Options
2. Highlight the desired memo and press
1. Highlight
3. Press DELETE (left softkey).
Editing a Voice Memo Caption
By default, the caption assigned to a voice memo is a
sequential file name which consists of the date
(Month_Day) followed by the memo number. For
example, two memos recorded on February 2, 2010,
would be listed as: Feb_02x1 and Feb_02x2. These file
names (captions) can be changed.
1. Highlight
and press
> Tools > Voice Memo
> Review.
2. Highlight the desired memo and press OPTIONS
(right softkey) > Edit Caption.
2G. Voice Services
89
Voice Services
䊳
M570.book Page 90 Thursday, June 10, 2010 12:00 PM
3. Press
to delete the previous text and then use
either the keypad or keyboard to enter a new
caption for the selected memo.
4. Press DONE (left softkey) to save the memo with
the new caption text.
Viewing the Information for a Voice Memo
1. Highlight
and press
> Tools > Voice Memo
> Review.
2. Highlight the desired memo to erase and press
OPTIONS (right softkey) > Info.
90
2G. Voice Services
M570.book Page 91 Thursday, June 10, 2010 12:00 PM
2H. microSD Card
⽧
Your Phone’s microSD Card and Adapter (page 91)
⽧
microSD Card Settings (page 93)
⽧
microSD Card Folders (page 94)
⽧
Connecting Your Phone to Your Computer (page 95)
1. Remove the battery cover (located on the back of
the phone).
Your Phone’s microSD Card and
Adapter
Release Latch
The microSD Card
Your phone comes with a 2GB microSDTM (Secure
Digital) memory card to expand the phone’s available
memory space. It allows you to store images, videos,
and music in your phone.
2. Place your fingernail into the Release Latch
indention (adjacent to the microphone) and
carefully lift (1) the case off the rear of the
phone (2).
2H. microSD Card
91
microSD Card
Inserting the microSD Card
M570.book Page 92 Thursday, June 10, 2010 12:00 PM
3. Locate the microSD card slot on the side of the
phone.
4. With the gold contact pins facing downward,
carefully insert the microSD card into the opening
and firmly push it in until you hear a click
indicating the card is securely installed (3).
5. Replace the cover by lining up the tabs and then
firmly pressing the cover down until it snaps into
place. Check that the battery is still properly
installed before turning on the phone.
Note: You can easily damage the microSD card and its
adapter by improper operation. Please be careful when
inserting, removing, or handling them.
Removing the microSD Card
1. Repeat steps 1-3 from “Inserting the microSD
Card” on page 91.
2. Firmly press the card into the slot and release (it
should pop partially out of the slot.
3. Remove the card from the slot.
4. Replace the cover by lining up the tabs and then
firmly pressing the cover down until it snaps into
place. Check that the battery is still properly
installed before turning on the phone.
Note: Be sure to use only recommended microSD cards (up
to 32GB). Using non-recommended microSD cards
could cause data loss and damage your phone.
92
2H. microSD Card
M570.book Page 93 Thursday, June 10, 2010 12:00 PM
accessed or transferred. Doing so will result in loss or
damage of data.
Make sure your battery is fully charged before using the
microSD card. Your data may become damaged or
unusable if the battery runs out while using the
microSD card.
Write Protection
The microSD adapter has a built-in Write Protection
lock to prevent accidental overwriting or removal of
your data when the microSD card and adapter are
inserted in another device.
䊳
microSD Adapter
The supplied microSD adapter allows you to use
microSD cards in other SD-compatible devices, like
computers, cameras, and printers. Before using the
microSD card with an SD-compatible device, you will
need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
䊳
With the label side of the microSD card facing up,
insert the card into the supplied microSD adapter,
and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
䊳
microSD Card
Note: DO NOT remove a microSD card while files are being
Slide the Write Protection lock tab down into the
“Lock” position to prevent overwriting of data. To
allow data to be added or removed from the
microSD card, slide the Write Protection lock tab
up into the normal position.
microSD Card Settings
Creating Folders in the microSD Card
The following steps allow your phone to create default
folders for storing files in your microSD card.
䊳
With the microSD card inserted, highlight
and
press
> Tools > Mass Storage > File Manager >
Memory Card > OPTIONS (right softkey) > Create
Folders.
Hold the front edge of the microSD card, and
gently pull it out to remove it from the adapter.
2H. microSD Card
93
M570.book Page 94 Thursday, June 10, 2010 12:00 PM
Note: With a formatted microSD card, there are no default
folders created. Upon initial access to the Camera, the
phone creates a Graphic folder. Upon access to the
Music Player, the Music/Tone folders are also created.
䊳
(The phone will create the microSD’s default
folders: Picture, Video, Voice, and Media.)
Viewing Memory in the microSD Card
䊳
With the microSD card inserted, highlight
and press
> Tools > Mass Storage > Memory
Info > Card. (The used and available memory
space will be displayed.)
Formatting the microSD Card
Formatting a microSD card permanently removes all
files stored on the card.
1. With the microSD card inserted, highlight
and press
> Tools > Mass Storage > Format
Memory Card.
2. Enter your lock code.
3. Press FORMAT (left softkey). (A warning will be
displayed.)
94
2H. microSD Card
Note: The formatting procedure erases all the data on the
microSD card, after which the files CANNOT be
retrieved. To prevent the loss of important data, please
check the contents before you format the card.
microSD Card Folders
Displaying Your microSD Card Folders
All the files stored in your microSD are accessible
through your microSD card folders.
1. With the microSD card inserted, highlight
and press
> Tools > Mass Storage > File
Manager > Memory Card.
2. Highlight a folder and press
.
3. To view or play a file, highlight it and press
or
the appropriate softkey.
Note: For information on file and folder options available
through File Manager, see “File Manager” on page 80.
M570.book Page 95 Thursday, June 10, 2010 12:00 PM
2. Connect the other end of the cable to your
computer and turn the phone on.
microSD Card
Creating Folders in the microSD Card
The following steps allow your phone to create folders
for storing files in your microSD card using only the File
Manager.
1. With the microSD card inserted, highlight
and press
> Tools > Mass Storage > File
Manager > Memory Card.
Correct
2. Press OPTIONS (right softkey) > Create Folder.
3. Enter a name for the new folder and press DONE
(left softkey) to save the new folder onto the card.
Connecting Your Phone to Your
Computer
Before using your phone’s mass storage capabilities,
you need to prepare your phone’s data services to
synchronize with your desktop or laptop computer.
Once you have connected the phone to the computer,
you can transfer your data to or from the microSD card.
1. With the phone turned on, plug one end of a
compatible USB cable into the phone's Charger/
Accessories Jack.
Incorrect
3. With the microSD card inserted, highlight
and press
> Tools > Mass Storage > Connect to
to PC.
Note: During this connection via the USB port, you will be
unable to use your phone to make or receive calls.
2H. microSD Card
95
M570.book Page 96 Thursday, June 10, 2010 12:00 PM
To remove the connection:
䊳
When you have finished transferring data, click the
USB device icon on your computer’s taskbar, and
follow the onscreen instructions to safely unplug
the USB cable.
䢇
䢇
– or –
Press DISCONNECT (right softkey) > DISCONNECT
(left softkey).
Important Connection Information
䢇
䢇
䢇
96
No driver installation is required for Windows 2000/
ME/XP/Vista users. If you use Windows 98/98SE, you
have to download and install the USB Mass Storage
Driver from the Sprint website at www.sprint.com.
To avoid loss of data, DO NOT remove the USB
cable, the microSD card, or the battery while files are
being accessed or transferred.
DO NOT use your computer to change or edit folder
or file names on the microSD card, and do not
attempt to transfer large amounts of data from the
computer to the microSD card. Doing so may cause
the microSD card to fail.
2H. microSD Card
䢇
DO NOT turn off or restart your computer, or put it
into standby mode, while using a mass storage
device. Doing so will result in loss or damage of data.
While you are connected to the computer, your
phone’s screen will display “Phone Off.” You cannot
make or receive calls.
If you connect a mass storage device to a peripheral
device, your device may not work properly.
M570.book Page 97 Thursday, June 10, 2010 12:00 PM
To take a picture:
⽧
Taking Pictures (page 97)
⽧
Recording Videos (page 101)
⽧
Storing Pictures and Videos (page 102)
⽧
Sending Pictures and Videos (page 104)
⽧
Printing Pictures From Your Phone (page 107)
⽧
Settings (page 107)
Taking Pictures
Taking pictures with your phone’s built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button. You can activate the phone’s
camera mode whether the phone is open or closed.
1. Highlight
and press
> Photos & Videos >
Camera to activate the camera mode. (Additional
camera options are available through the camera
mode OPTIONS menu. See “Camera Mode
Options” on page 98 for more information.)
Shortcut: To activate camera mode, you can also press and
hold the side camera button (
illustration on page 8.)
). (See
Camera
2I. Camera
2. Using the phone’s display screen as a viewfinder,
aim the camera lens at your subject.
3. Press
or the side camera button until the
shutter sounds. (Your phone automatically saves
the picture to the selected storage area.)
䡲 To return to camera mode to take another picture,
press
.
4. Once you’ve taken your picture, press OPTIONS
(right softkey) for more options:
Send Picture to send your picture in a message.
(See page 104 for details.)
䡲 Camera to return to the camera to take additional
pictures.
䡲
2I. Camera
97
M570.book Page 98 Thursday, June 10, 2010 12:00 PM
Assign to assign the picture as a Picture ID or
Screen Saver.
䡲 Erase to delete the picture you just took.
䡲 Review Album to go to the My Photos & Videos
folder where you can review your saved pictures.
䡲
Assigning Pictures
After taking a picture, assign it as a screen saver or as
a picture ID for a Contacts entry.
1. Take a picture. (See steps 1–3 on page 97.)
2. With the picture displayed, press OPTIONS
(right softkey) > Assign, and select an option.
Picture ID to assign the picture to either a Contacts
entry, Unsaved Numbers, or to a Private/Unknown
number. Highlight an entry and press
to
assign the picture.
䡲 Screensaver to assign the picture as a screen
saver. Press
to assign the picture.
䡲
Tip: You can also assign pictures from the My Photos &
Videos menu. See “In Phone Folder and microSD Card
Options” on page 103.
98
2I. Camera
Camera Mode Options
When the phone is open and in camera mode, press
OPTIONS (right softkey) to display additional camera
options:
䢇 MODE to select a cameras mode: Camera or
Camcorder. To switch to video mode. (See
“Recording Videos” on page 101.)
䢇 SHOOTING MODE to select the picture mode. Choose
from the following:
䡲 Single Shot to take a single image.
䡲 Continuous to take multiple shots. (See “Taking
Multiple Shots” on page 100.)
䡲 Mosaic to take a series of pictures and then
combine them into a single image.
䡲 Panorama to take multiple images and have them
combined to create a panoramic image.
䡲 Night Shot to take a photo in low light conditions.
䢇 RESOLUTION to set the picture’s resolution (2M, 1.3M,
High, Med, and Low).
M570.book Page 99 Thursday, June 10, 2010 12:00 PM
䢇
䢇
䢇
䢇
䢇
䢇
䢇
WHITE BALANCE to adjust white balance based on
changing lighting conditions (Auto, Daylight, Cloudy,
Incandescent, Fluorescent, or Manual). (The default
setting is Auto.)
Brightness to adjust the image brightness level. Press
the navigation key up (increase) or down (decrease)
to select a setting. (The default setting is 0.)
SELF TIMER to activate the camera’s timer. (See “Self
Timer” on page 99.)
EFFECT to apply an image effect. Selects a wide
variety of color tones for the picture. (The default
setting is None.)
QUALITY to select the picture quality setting (Fine,
Normal, or Economy).
Shutter Sound to select a shutter sound (Shutter 1-3
or Off).
AUTO-SEND to select whether to automatically send
the new taken image to the assigned storage
location (On) or be prompted after an image is taken
(Off).
Storage to select the destination for the image files
(Phone or Card).
Self Timer
1. From camera mode, press OPTIONS (right softkey)
> SELF TIMER.
2. Highlight the length of delay you want the timer to
use (5 Sec or 10 Sec) and press
.
3. Press
when you are ready to start the timer.
(The timer is displayed on the upper-left portion of
the display screen during the self-timer
countdown.)
4. Get ready for the picture. (When the timer is down
to three seconds, the self-timer icon will turn red
and the phone will begin to beep.)
To cancel the self-timer after it has started:
䊳
Press
.
Note: While the Self Timer is active, all keys are disabled
except
.
2I. Camera
99
Camera
䢇
M570.book Page 100 Thursday, June 10, 2010 12:00 PM
Taking Multiple Shots
䡲
This feature allows you to take up to nine shots in a
continuous sequence.
View/Hide information bars to toggle on or off the
display all of the current camera information such
as battery level (Image size, quality, storage
location, etc...
1. From camera mode, press OPTIONS (right softkey)
> SHOOTING MODE > Continuous.
2. Highlight an option and press
Camera Options
Image Remaining
Function
:
䡲
Off to deactivate the multiple shots option.
䡲
5 Shots to take a series of five pictures.
䡲
10 Shots to take a series of ten pictures (image
resolution is set to Low).
Note: Your phone automatically saves the pictures in your
selected storage area at 320 x 240 resolution.
AWB
OFF

Display
Image
Customized Screen
These features allow you to customize how the
onscreen viewfinder is displayed.
ALBUM
1. From camera mode, press the QWERTY up or
down arrows, or scroll over the navigation key up
or down. You will see the following options:
100
2I. Camera
Photos & Videos folder
䡲
Options
Camera Options
View/Hide quadrants to toggle on or off an
onscreen quadrant that can be used to position
your subjects.
M570.book Page 101 Thursday, June 10, 2010 12:00 PM
(Your phone automatically saves the picture in your
designated storage area.)
Note: The Zoom gauge will not be displayed when the
Resolution setting is High.
Recording Videos
In addition to taking pictures, you can record, view, and
send videos with your phone’s built-in video camera.
1. Highlight
and press
> Photos & Videos >
Camcorder to activate video mode.
2. Select Video Mail or Long Video.
Note: Video Mail can be at most 30 seconds in length, but
the length of a Long Video is dependent on both the
quality settings and storage type used (phone or
memory card).
3. Using the phone’s display screen as a viewfinder,
aim the camera lens at your subject.
4. Press
or the side camera button to begin
recording.
䡲 To return to camcorder mode to take another
video, press
.
5. Press
,
, or the side camera button to stop
recording. (Your phone automatically saves the
video in your designated storage area.)
6. Press OPTIONS (right softkey) and select an option:
䡲
Send Video to send the video. (See “Sending
䡲
Play to play the video.
Camera
2. Press the side camera button to take the picture.
Pictures and Videos” on page 104.)
Assign to assign the video as a video ringer or to
voice calls.
䡲 Erase to delete the video.
䡲 Camcorder to return to camcorder mode.
䡲 Review Album to review all pictures and videos
saved in the In Phone folder.
䡲
2I. Camera
101
M570.book Page 102 Thursday, June 10, 2010 12:00 PM
Video Mode Options
When the phone is in camcorder mode, press
OPTIONS (right softkey) to display additional
camcorder options:
䢇 MODE to select a cameras mode: Camera or
Camcorder. To switch to camera mode. (See “Taking
Pictures” on page 97.)
䢇 WHITE BALANCE to adjust white balance based on
changing lighting conditions (Auto, Daylight, Cloudy,
Incandescent, Fluorescent, or Manual). (The default
setting is Auto.)
䢇 Brightness to adjust the image brightness level. Press
the navigation key up (increase) or down (decrease)
to select a setting. (The default setting is 0.)
䢇 SELF TIMER to activate the camcorder’s timer. (See
“Self Timer” on page 99.)
䢇 EFFECT to apply an image effect. Selects a wide
variety of color tones for the video. (The default
setting is None.)
䢇 QUALITY to select the picture quality setting (Fine,
Normal, or Economy).
102
2I. Camera
䢇
䢇
AUTO-SEND to select whether to automatically send
the new video to the assigned storage location (On)
or be prompted after a video is shot (Off).
Storage to select the destination for the video files
(Phone or Card).
Storing Pictures and Videos
Your phone’s picture and video storage area is
called My Photos & Videos. There are two types of
folders:
䢇
In Phone
䢇
Memory Card
Storage Options
1. Highlight
and press
Settings > Auto Save to.
2. Select Phone or Card.
> Photos & Videos >
M570.book Page 103 Thursday, June 10, 2010 12:00 PM
2. Use your navigation key to scroll through and view
In Phone Folder
saved pictures and videos.
To review your stored pictures and videos in the In Phone
folder:
1. Highlight
and press
> Photos & Videos >
My Photo & Videos > In Phone.
2. Use your navigation key to view and scroll through
the pictures and videos.
microSD Picture and Video Folders
You can save pictures and videos directly to the
microSD card using your phone’s pictures and videos
settings.
To review your stored pictures and videos on the
microSD card:
1. Highlight
and press
> Photos & Videos >
My Photo & Videos > Memory Card.
In Phone Folder and microSD Card
Options
When you are viewing the In Phone folder or the
memory Card folders, press OPTIONS (right softkey) to
display the following options:
䢇 Expand view/Thumbnail view to switch the display
from expanded view to thumbnail view (up to nine
pictures per screen).
䢇 Play to play a selected video.
䢇 Slide show to view all current folder images as an
onscreen slideshow (only available when you save
two or more pictures to the folder). Press left or right
keys (or scroll over the navigation key) to skip or any
other key to stop the slideshow.
䢇 Select Multiple to select multiple images or videos.
䢇 Assign to assign the current image as a Picture ID or
Screen Saver or the selected video clip as a Video
Ringer or Voice Calls.
䢇 Delete to erase the image or selected videos.
2I. Camera
Camera
Your phone’s internal storage area is called the In
Phone folder. From the In Phone folder, you can view all
the pictures and videos you have stored there, send items
to your Places, delete files, and access additional
options.
103
M570.book Page 104 Thursday, June 10, 2010 12:00 PM
Note: Deleting pictures will free up memory space in your
phone to enable you to take more pictures. Once
deleted, pictures cannot be uploaded to your online
Sprint Picture Mail account.
䢇
䢇
䢇
䢇
1. Select
Print.. to print an image by either PictBridge Print or
– or –
Bluetooth connection.
Copy/Move to copy or move an image or video to an
installed memory card.
Details/Edit to attach a text caption or view the media
information associated with a file.
Camera/Camcorder Mode to switch to either the
camera or camcorder mode.
Highlight
Message.
Sending Pictures and Videos
Once you have taken a picture or a video, you can use
the messaging capabilities of your phone to instantly
share it with family and friends. You can send a picture
to up to 25 people at a time using their email
addresses or their wireless phone numbers.
104
Sending Pictures and Videos From
Messaging
2I. Camera
> Send Message.
and press
> Messages > Send
– or –
Press
on the QWERTY keyboard.
2. Select an entry method:
䡲
Go to Contacts to select a recipient from your
Contacts. (Qualifying Contacts entries must
contain a wireless phone number or an email
address.)
– or –
Press MULTIPLE (left softkey) to select more than
one recipient and press
.
– or –
Press NEW ADDR (right softkey) to manually enter
either a phone number or email address.
M570.book Page 105 Thursday, June 10, 2010 12:00 PM
Phone Number to use the keypad to enter a
●
wireless phone number directly.
Email Address to enter the recipient’s email
address.
3. Press CONTINUE (left softkey) when you have
finished entering recipients. (You may include up
to 25 recipients per message.)
4. Press OPTIONS (right softkey), highlight
Add/Change Attachment and press
.
5. Highlight an option and press
.
䡲 My album to select a picture or video stored in the
phone.
䡲 Take new picture to take a new picture to attach to
the message.
䡲 Take new video to record a new video to attach to
the message.
䡲 Voice to attach a new voice memo.
6. Enter a message, use a preset message, or use
smiley’s/symbol.
To type a message, use your keypad to enter your
message. Use the right softkey to select an input
mode. (See “Entering Text in Portrait Mode” on
page 31 or See “Entering Text in Landscape
Mode” on page 35.)
䡲 Use the OPTIONS (right softkey) to select a Text
Mode (such as Predictive Text, Smiley’s, or
Symbols).
䡲 To use a preset message, press OPTIONS (right
softkey), select Add Preset Message, and then
select a message and press
.
䡲 To use a smiley or symbol, press OPTIONS (right
softkey) > Text Mode and select Smiley’s or
Symbols.
䡲
Camera
●
7. Review your message and press SEND (left
softkey) to deliver your message.
Sending Pictures and Videos From the
In Phone Folder
1. Highlight
and press
> Photos & Videos >
My Photo & Videos > In Phone.
2. Highlight a picture or video to send and press
2I. Camera
.
105
M570.book Page 106 Thursday, June 10, 2010 12:00 PM
3. Press SEND (left softkey). (You will see a message
3. Press SEND (left softkey). (You will see a message
about updating your places list.)
about updating your places list.)
4. Highlight an option and press
4. Select New Place... > My PC/Email.
:
䡲 Contact to select recipients from your Contacts.
Highlight a recipient and press
.
䡲 Bluetooth to select a target Bluetooth device.
䡲 New Place... to send your image or video to an
external site “place”.
Choices include: My PC/Email, EA Tips and Tricks,
MySpace, Snapfish, YouTube, Photobucket, and
Facebook.
5. Enter the recipient’s email address.
Important: To automatically upload all new images and
videos to your designated email address, enable
the “Automatically send...”field.
6. Press DONE (left softkey) to send the email.
Uploading Pictures and Videos to a Place
1. Highlight
Note: The My PC/Email option allows you to send your
will see the thumbnail pictures.)
3. Highlight a picture or video to send and press
Sending Pictures and Videos to an Email
about updating your places list.)
5. Select New Place.., select a target place, login to
your account, and follow the onscreen instructions.
> Photos & Videos >
My Photo & Videos > In Phone.
2. Highlight a picture or video to send and press
106
2I. Camera
.
4. Press SEND (left softkey). (You will see a message
You can also send Sprint Picture Mail from your
phone’s Messages menu.
and press
> Photos & Videos >
2. Select a location (In Phone or Memory Card). (You
5. Follow the onscreen instructions.
1. Highlight
and press
My Photo & Videos.
currently selected file to an email account and then
download it to a computer. See “Email” on page 135.
.
M570.book Page 107 Thursday, June 10, 2010 12:00 PM
Printing Pictures From Your Phone
6. When you have finished selecting the printer
Your phone is PictBridge compatible, allowing you to
print directly from your phone without connecting to a
computer. Simply connect your phone to a PictBridgeenabled printer and print your photos.
Note: While you are connected to the printer, your phone’s
PictBridge.
and press
My Photo & Videos.
7. When printing is finished, press
.
8. Select Yes. Follow the instructions on the display to
unplug the USB cable from the phone.
To print pictures directly from your phone:
1. Highlight
screen will display “Phone Off.” You cannot make or
receive calls during this time.
> Photos & Videos >
2. Select a location (In Phone or Memory Card). (You
will see the thumbnail pictures.)
3. Press OPTIONS (right softkey) > Print... > PictBridge
Print.
4. Connect your phone to the PictBridge-enabled
printer by using a USB cable (not included). (Wait
until the connection is completed.)
5. Set the printer settings using your navigation key.
These settings can vary among bluetooth-capable
printers.
PictBridge Error Messages –
From time to time you may encounter printing problems. Your
phone will display any printer error messages informing you of
the specific problems encountered. Please refer to the user’s
guide that came with your printer for descriptions, explanations,
and possible resolutions for any error messages.
Camera
Note: Make sure your battery is fully charged before using the
settings, select Print.
Settings
This menu allows you to configure where pictures are
saved, view your account information, or set the view
between portrait or landscape mode.
1. Highlight
and press
> Photos & Videos >
Settings.
2I. Camera
107
M570.book Page 108 Thursday, June 10, 2010 12:00 PM
2. Select one of the following options:
䡲
Auto Save to to choose between Phone and
Memory Card as the default location to save
pictures or videos.
䡲 Status Bar to select whether the Status Bar is
displayed onscreen when the camera/camcorder
is active.
108
2I. Camera
M570.book Page 109 Thursday, June 10, 2010 12:00 PM
Turning Bluetooth On and Off
⽧
Turning Bluetooth On and Off (page 109)
⽧
Using the Bluetooth Settings Menu (page 110)
⽧
Pairing Bluetooth Devices (page 110)
⽧
Sending Items via Bluetooth (page 111)
About Bluetooth
Bluetooth is a short-range communications technology
that allows you to connect wirelessly to a number of
Bluetooth devices, such as headsets and hands-free
car kits, and Bluetooth-enabled handhelds, computers,
printers, and wireless phones. The Bluetooth
communication range is usually up to approximately
30 feet.
By default, your device’s Bluetooth feature is set to Off.
Turning Bluetooth on makes your phone “discoverable”
by other in-range Bluetooth devices.
To turn Bluetooth on:
1. Highlight
and press
> Tools > Bluetooth >
On/Off.
2. Highlight On and press
to enable Bluetooth.
To turn Bluetooth off:
1. Highlight
and press
> Tools > Bluetooth >
On/Off.
2. Highlight Off and press
to disable Bluetooth.
Bluetooth Status Indicators
Bluetooth
2J. Bluetooth
The following icons show your Bluetooth connection
status at a glance:
– Bluetooth is active
– Bluetooth is Visible (active and enabled)
2J. Bluetooth
109
M570.book Page 110 Thursday, June 10, 2010 12:00 PM
– Bluetooth is visible and connected
to a device or transferring data.
– Bluetooth is visible and connected
to a Bluetooth headset.
– Bluetooth is active, connected and playing
music via the Stereo Bluetooth Headset.
Using the Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many
of the characteristics of your phone’s Bluetooth service,
including:
䢇 Entering or changing the name your phone uses for
Bluetooth communication
䢇 Setting your phone’s visibility (or “discoverability”) for
other Bluetooth devices
䢇 Displaying your phone’s Bluetooth address
To access the Bluetooth Settings menu:
1. Highlight
and press
> Tools > Bluetooth.
2. Set your Bluetooth options.
Select Visibility > Hidden, Visible for 3 Min, or
Always Visible to set your Bluetooth visibility.
䡲 Select My Bluetooth Info to display your phone’s
Bluetooth profiles and address.
● Press EDIT (left softkey) to rename your phone
for Bluetooth.
䡲 Select Trusted Devices to display your phone’s
current list of external trusted Bluetooth devices.
䡲
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish
trusted connections between your phone and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Highlight
and press
> Tools > Bluetooth >
Add new. (Your phone will display a list of
discovered in-range Bluetooth devices.)
110
2J. Bluetooth
M570.book Page 111 Thursday, June 10, 2010 12:00 PM
. Different device
categories are indicated by a different icon
adjacent to the detected Bluetooth device.
3. Enter the passkey and press
.
4. Enter a unique Device Name and press DONE (left
softkey).
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetoothcompatible devices.
3. Follow the onscreen prompts to enter your passkey
and press
.
Sending Items via Bluetooth
Depending on your paired devices’ settings and
capabilities, you may be able to send pictures,
Contacts information, or other items using a Bluetooth
connection.
To send contacts information via Bluetooth:
1. Highlight
and press
> Contacts.
Pairing With a Computer
2. Highlight an entry and press OPTIONS (right
If you are going to be pairing with a computer’s
Bluetooth interface, you will need to allow the computer
to initiate pairing with your phone.
3. Place a checkmark next to the Contact entry you
To allow your phone to be paired with another Bluetooth
device:
1. Highlight
and press
> Tools > Bluetooth >
Add new.
2. Select a Bluetooth device from the list showing an
adjacent Computer icon.
Bluetooth
2. Highlight a device and press
softkey) > Send Contact.
want to send by first selecting an entry and
pressing
.
4. Press SEND CONTACTS (left softkey). (The phone
begins searching for available Bluetooth devices.
Bluetooth-capable phones will appear in the list
with an adjacent phone icon.)
䡲 If the device isn’t in the list, select OPTIONS
(right softkey) > Refresh.
2J. Bluetooth
111
M570.book Page 112 Thursday, June 10, 2010 12:00 PM
5. From the list of Found Devices, highlight the target
Bluetooth device and press SELECT (left softkey).
6. Select Yes to confirm you want to send the contact.
(The recipient’s phone displays an onscreen
message asking whether the person would like to
receive and save your Contact entry to his or her
list.)
7. The recipient must either accept and save the
contact, or reject the incoming data.
To send pictures via Bluetooth:
1. Highlight
and press
My Photos & Videos.
.
3. Select a picture by highlighting it and then
pressing
.
4. Press SEND (left softkey) > Bluetooth > Yes. (The
phone begins searching for available Bluetooth
devices. Bluetooth-capable phones will appear in
the list with an adjacent phone icon.)
112
2J. Bluetooth
device and press
.
6. Select Yes. (The recipient’s phone displays an
onscreen message asking whether the person
would like to receive and save your Contact entry
to his or her list.)
7. The recipient must either accept and save the
image, or reject the incoming data.
To send files via Bluetooth:
1. Highlight
> Photos & Videos >
2. Select an album (In Phone, or Memory Card) and
press
5. From the list of Found Devices, select the Bluetooth
and press
> Tools > Mass
Storage > File Manager.
2. Select a source location (Phone or Memory Card).
3. Highlight a file and press OPTIONS (right softkey).
4. Select Send > Bluetooth.
5. Select a file by highlighting it and then pressing
to place a checkmark adjacent to the selected
files.
6. Press Done (left softkey).
M570.book Page 113 Thursday, June 10, 2010 12:00 PM
7. Highlight a trusted Bluetooth device and press
SELECT (left softkey).
8. Select Yes to confirm the file transfer process. (The
Bluetooth
phone begins the transfer process.) The target
Bluetooth device must accept the incoming file
transfer to complete the delivery process.
2J. Bluetooth
113
M570.book Page 114 Thursday, June 10, 2010 12:00 PM
M570.book Page 115 Thursday, June 10, 2010 12:00 PM
Section 3
Sprint Service
M570.book Page 116 Thursday, June 10, 2010 12:00 PM
3A. Sprint Service:
The Basics
⽧
Voicemail (page 116)
⽧
Messaging (SMS/MMS) (page 119)
⽧
Caller ID (page 121)
⽧
Call Waiting (page 122)
⽧
Making a 3-Way Call (page 122)
⽧
Call Forwarding (page 123)
⽧
Roaming (page 123)
Voicemail
Setting Up Your Voicemail
Your phone automatically transfers all unanswered
calls to your voicemail, even if your phone is in use or
turned off. You should set up your Sprint Voicemail and
personal greeting as soon as your phone is activated.
116
3A. Sprint Service: The Basics
Always use a passcode to protect against unauthorized
access.
1. Press and hold
.
2. Follow the system prompts to:
Create your passcode.
Record your name announcement.
䡲 Record your greeting.
䡲
䡲
Note: Voicemail Passcode
Sprint strongly recommends that you create a
passcode when setting up your voicemail to protect
against unauthorized access. Without a passcode,
anyone who has access to your phone is able to
access your voicemail messages.
Voicemail Notification
There are several ways your phone alerts you to a new
message:
䢇 By displaying a message on the screen.
䢇 By sounding the assigned ringer type.
䢇 By the LED blinking red.
䢇 By displaying
at the top of your screen.
M570.book Page 117 Thursday, June 10, 2010 12:00 PM
New Voicemail Message Alerts
Retrieving Your Voicemail Messages
When you receive a new voice message, your phone
alerts you and prompts you to call your voicemail.
You can review your messages directly from your
wireless phone or from any other touch-tone phone. To
dial from your wireless phone, either speed dial your
voicemail or use the menu keys.
To call your voicemail:
Press and hold
.
Using One-Touch Message Access
䊳
Highlight
and press
> Missed Alerts.
Note: When you are roaming off the Nationwide Sprint
Network, you may not receive notification of new
voicemail messages. Sprint recommends that you
periodically check your voicemail by dialing 1 + area
code + your wireless phone number. When your
voicemail answers, press
and enter your
passcode. Roaming rates apply when you access
voicemail while roaming off the Nationwide Sprint
Network.
Your phone accepts messages even when it is turned
off. However, your phone notifies you of new messages
only when it is turned on and you are in a Sprint service
area.
䊳
Press and hold
voicemail box.)
. (Your phone will dial your
– or –
From the lock screen, press LISTEN (left softkey)
Using the Menu Keys on Your Phone to Access
Your Messages
1. Highlight
and press
> Messages >
Voicemail > Call Voicemail.
– or –
Select
Sprint Service
䊳
To display your Missed Log:
> Voicemail.
Note: You are charged for airtime minutes when you are
accessing your voicemail from your wireless phone.
3A. Sprint Service: The Basics
117
M570.book Page 118 Thursday, June 10, 2010 12:00 PM
Using Another Phone to Access Messages
1. Dial your wireless phone number.
2. When your voicemail answers, press
.
Voicemail Key Guide
Here’s a quick guide to your keypad functions while
listening to voicemail messages.
3. Enter your passcode.
Tip: When you call into voicemail, you first hear the header
information (date, time, and sender information) for the
message. To skip directly to the message, press 4 during
the header.
Date/Time
Send Reply
Advance
Replay
Rewind
Forward
Erase
Return Call
Save
Cancel
Help
Skip
Clearing the Message Icon
Your phone may temporarily continue to display the
message icon after you have checked your voice and
text messages.
1. Highlight
and press
> Messages >
Voicemail > Clear Envelope.
2. Highlight Yes or No and press
118
.
3A. Sprint Service: The Basics
M570.book Page 119 Thursday, June 10, 2010 12:00 PM
Messaging (SMS/MMS)
Composing Text/Picture Messages
In addition, text messaging includes a variety of preset
messages, such as “I’m running late, I’m on my way,”
that make composing messages fast and easy. Use
your phone to customize your own preset messages
(up to 160 characters).
Tip: You can instantly access all your phone’s messaging
options, including text messaging, using the main screen
carousel. See section 2B “Navigating the Main Screen”
on page 42 for details.
Note: See your service plan for applicable charges for text
messaging and SMS voice messaging.
> Send Message > Message.
– or –
Highlight
Message.
and press
> Messages > Send
– or –
Press
on the QWERTY keyboard.
2. Select an entry method:
䡲
Go to Contacts to select a recipient from your
Contacts. (Qualifying Contacts entries must
contain a wireless phone number or an email
address.)
– or –
Press MULTIPLE (left softkey) to select more than
one recipient and press
.
– or –
Note: Creating messages can also be accessed from the
Main Menu > Messages or by pressing
QWERTY keyboard.
1. Select
Sprint Service
With text and picture messaging (SMS/MMS), you can
send and receive instant text and picture messages
between your wireless phone and another messagingready phone. When you receive a new message, it will
automatically display on your phone’s screen.
on the
Press NEW ADDR (right softkey) to manually enter
either a phone number or email address.
● Phone Number to use the keypad to enter a
wireless phone number directly.
3A. Sprint Service: The Basics
119
M570.book Page 120 Thursday, June 10, 2010 12:00 PM
●
Email Address to enter the recipient’s email
5. Add a picture, video, or voice message to a text
address.
message as an attachment:
Press OPTIONS (right softkey), highlight
Add/Change Attachments and press
.
䡲 Select an attachment option and follow the
onscreen prompts to select a file.
● Options include: My album, Take new picture,
Take new video, or Voice.
䡲
3. Press CONTINUE (left softkey) when you have
finished entering recipients. (You may include up
to 25 recipients per message.)
4. Enter a message, use a preset message, or use
smiley’s/symbol.
To type a message, use your keypad to enter your
message. Use the right softkey to select an input
mode. (See “Entering Text in Portrait Mode” on
page 31 or See “Entering Text in Landscape
Mode” on page 35.)
䡲 Use the OPTIONS (right softkey) to select a Text
Mode (such as Predictive Text, Smiley’s, or
Symbols).
䡲 To use a preset message, press OPTIONS (right
softkey), select Add Preset Message, and then
select a message and press
.
䡲 To use a smiley or symbol, press OPTIONS (right
softkey) > Text Mode and select Smiley’s or
Symbols.
䡲
120
3A. Sprint Service: The Basics
6. Review your message and press SEND (left
softkey) to deliver your message.
Accessing Text Messages
To read an SMS Text message:
䊳
When you receive a text message, you will see it
on your phone’s screen. Use your navigation key to
scroll down and view the entire message.
To reply to a text message:
1. While the message is open, press REPLY (left
softkey).
M570.book Page 121 Thursday, June 10, 2010 12:00 PM
or icons.
䡲 To type a message, use your keypad to enter your
message. Use the right softkey to select an input
mode. (See “Entering Text in Portrait Mode” on
page 31 or See “Entering Text in Landscape
Mode” on page 35.)
䡲 To use a preset message, press the right softkey,
press OPTIONS > Add Preset Message, highlight a
message and press
.
䡲 To use a Smiley or Symbol, press the right softkey,
press OPTIONS > Text Mode > Smiley’s or
Symbols, highlight a selection and press
.
䡲 You may select additional messaging options by
pressing OPTIONS (right softkey) > Mark as Urgent
or Set Callback #.
3. Review your reply and press SEND (left softkey) to
deliver your message.
Preset Messages
Preset messages make it easy to compose text
messages.
To add or edit preset messages:
1. Highlight
and press
> Messages >
Settings > Preset Messages > OPTIONS (right
softkey) > Add New.
– or –
Highlight a preset message and press EDIT (left
softkey).
Highlight a preset message and press OPTIONS
(right softkey)> Delete.
2. Enter your new message or changes and
press
. (See “Entering Text in Portrait Mode” on
page 31 or See “Entering Text in Landscape
Mode” on page 35.)
Caller ID
Caller ID allows people to identify a caller before
answering the phone by displaying the number of the
incoming call. If you do not want your number
displayed when you make a call, follow these steps.
1. Press
.
3A. Sprint Service: The Basics
Sprint Service
2. Compose your reply or use the preset messages
121
M570.book Page 122 Thursday, June 10, 2010 12:00 PM
2. Enter a phone number.
3. Press
Making a 3-Way Call
.
To permanently block your number, call Sprint
Customer Service.
Call Waiting
With 3-Way Calling, you can talk to two people at the
same time. When using this feature, the normal airtime
rates will be charged for each of the two calls.
1. Enter a number and press
.
Important: It is recommended that the first line be active for
When you’re on a call, Call Waiting alerts you to
incoming calls by sounding two beeps. Your phone’s
screen informs you that another call is coming in and
displays the caller’s phone number (if it is available and
you are in digital mode).
To respond to an incoming call while you’re on a call:
䊳
Press
. (This puts the first caller on hold and
answers the second call.)
To switch back to the first caller:
䊳
Press
again.
Tip: For those calls where you don’t want to be interrupted,
you can temporarily disable Call Waiting by pressing
before placing your call. Call Waiting is
automatically reactivated once you end the call.
122
3A. Sprint Service: The Basics
at least 20 seconds prior to initiating a 3-way call
with a second party.
2. Once you have established the connection, press
OPTIONS (right softkey) > 3-way call.
3. Choose the second number by selecting one of
the following:
Contacts to select a recipient from your Contacts
(qualifying Contacts entries must contain a
wireless phone number).
● Highlight the entry and press
.
● Highlight the number (from the CONTACT
DETAILS page) and press
.
● Highlight Call and press
.
䡲
M570.book Page 123 Thursday, June 10, 2010 12:00 PM
Recent History to select a number from your
Recent History entries.
● Highlight the entry (from the RECENT HISTORY
page) and press
.
● Highlight the number or time entry and
press
.
● Highlight Call and press
.
䡲 Enter phone number to use the keyboard to enter
a wireless phone number directly.
● Enter the phone number and press
.
4. When you’re connected to the second party, press
JOIN (right softkey) to begin your 3-way call.
If one of the people you called hangs up during your
call, you and the remaining caller stay connected. If you
initiated the call and are the first to hang up, all callers
are disconnected.
Call Forwarding
Call Forwarding lets you forward all your incoming calls
to another phone number – even when your phone is
turned off. You can continue to make calls from your
phone when you have activated Call Forwarding.
To activate Call Forwarding:
1. Press
.
2. Enter the area code and phone number to which
you want your calls forwarded.
3. Press
. (You will see a message and hear a
tone to confirm the activation of Call Forwarding.)
To deactivate Call Forwarding:
1. Press
.
2. Press
. (You will see a message and hear a
tone to confirm the deactivation.)
Note: You are charged a higher rate for calls you have
forwarded.
Roaming
Roaming Icon
Your display screen always lets you know when you’re
off the Nationwide Sprint Network. Anytime you are
roaming, the phone displays the roaming icon ( ). If
you are roaming on a digital system, you will see the
roaming icon along with the text – Digital Roam – .
3A. Sprint Service: The Basics
Sprint Service
䡲
123
M570.book Page 124 Thursday, June 10, 2010 12:00 PM
Tip: Remember, when you are using your phone off the
Nationwide Sprint Network, always dial numbers using
11 digits (1 + area code + number).
Callers can still leave messages, but you will need to
periodically check your voicemail for new messages if
you are in a roaming service area for an extended
period of time.
Roaming on Other Digital Networks
1. Dial 1 + area code + your phone number.
When you’re roaming on digital networks, your call
quality and security will be similar to the quality you
receive when making calls on the Nationwide Sprint
Network. However, you may not be able to access
certain features, such as data services, depending on
the available network.
2. When you hear your voicemail greeting,
Note: If you’re on a call when you leave the Nationwide Sprint
Network, your call is dropped. If your call is dropped in
an area where you think Sprint service is available, turn
your phone off and on again to reconnect to the
network.
Checking for Voicemail Messages While
Roaming
When you are roaming off the Nationwide Sprint
Network, you may not receive on-phone notification of
new voicemail messages.
124
3A. Sprint Service: The Basics
press
.
3. Enter your passcode at the prompt and follow the
voice prompts.
When you return to the Nationwide Sprint Network,
voicemail notification will resume as normal.
Setting Roam Mode
Your phone allows you to control your roaming
capabilities. By using the Roaming menu option, you
can determine which signals your phone accepts.
Choose from three different settings on your dual-band
phone to control your roaming experience.
1. Highlight
and press
Roaming > Set Mode.
> Settings > Others >
M570.book Page 125 Thursday, June 10, 2010 12:00 PM
2. Highlight an option and press
.
Note: Call Guard is turned on by default on your phone.
Automatic to seek service on the Nationwide
Sprint Network. When Sprint service is
unavailable, the phone searches for an alternate
system.
䡲 Sprint Only to access only the Nationwide Sprint
Network and prevent roaming on other networks.
Call Guard
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and press
2. Press
.
to send a call.
Your phone has two ways of alerting you when you are
roaming off the Nationwide Sprint Network: the
onscreen roaming icon and Call Guard. Call Guard
makes it easy to manage your roaming by requiring an
extra step before you can place or answer a roaming
call. (This additional step is not required when you
make or receive calls while on the Nationwide Sprint
Network.)
To answer incoming roaming calls with Call Guard on:
To turn Call Guard on or off:
Data Roam Guard
1. Highlight
and press
> Settings > Others >
Roaming > Call Guard.
2. Highlight On or Off and press
.
1. Press
. (A message will be displayed notifying
you that roaming charges will apply.)
2. Press
to complete the call.
Note: If the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls.
Depending on service availability and roaming
agreements, your phone may be able to access data
services while roaming on certain digital systems.
3A. Sprint Service: The Basics
Sprint Service
䡲
125
M570.book Page 126 Thursday, June 10, 2010 12:00 PM
You can set your phone to alert you when you are
roaming off the Nationwide Sprint Network and try to
use data services such as messaging.
Note: Data Roam Guard is turned off by default on your
phone.
To set your Data Roam Guard notification:
1. Highlight
and press
> Settings > Others >
Roaming > Data Roam Guard.
2. Highlight an option and press
䡲
.
Always Ask sets your phone’s Data Roam Guard
feature on. You will see a prompt and will be
required to respond anytime you access data
services while roaming.
䡲 Never Ask turns your phone’s Data Roam Guard
feature off. You will not be notified of your roaming
status when accessing data services.
To use data services when Data Roam Guard is active:
䊳
126
When a pop-up notification appears informing you
that data roam charges may apply, press ROAM
(left softkey) to connect.
3A. Sprint Service: The Basics
M570.book Page 127 Thursday, June 10, 2010 12:00 PM
3B. Web and Data Services
⽧
Getting Started With Data Services (page 127)
⽧
Browser Menu (page 131)
⽧
Accessing Messages (page 135)
⽧
Downloading Games, Ringers, and More (page 138)
⽧
Applications (page 141)
⽧
Data Services FAQs (page 149)
Getting Started With Data Services
With your Sprint service, you are ready to start enjoying
the advantages of data services. This section will help
you learn the basics of using your data services,
including managing your user name, launching a data
connection, and navigating the Web with your phone.
When you buy your phone and sign up for service,
you’re automatically assigned a user name, which is
typically based on your name and a number, followed
by “@sprintpcs.com.” (For example, the third John
Smith to sign up for Sprint data services might have
jsmith003@sprintpcs.com as his user name.)
Web and Data
Your User Name
When you use data services, your user name is
submitted to identify you to the Nationwide Sprint
Network. Your user name will be automatically
programmed into your phone. You don’t have to enter it.
Finding Your User Name
If you aren’t sure what your user name is, you can
easily find it online or on your phone.
䢇 At www.sprint.com. Sign on to your account using
your phone number and password. To display your
user name, click on the Settings & Passwords menu,
then under the Account Admin Tools column, click on
Phone Labels > Username.
䢇 On your phone, highlight
and press
>
Settings > Phone Information > Phone Number/User ID.
3B. Web and Data Services
127
M570.book Page 128 Thursday, June 10, 2010 12:00 PM
Updating Your User Name
If you choose to change your user name and select a
new one online, you must then update the user name
on your phone.
䊳
Highlight
and press
> Settings > Others >
Data > Update Data Profile. (To cancel, press
before completing the update.)
Launching a Web Connection
䊳
Select
> Home.
– or –
> Web. (Your data
Highlight
and press
connection starts and you see the SprintWebSM
home page.)
– or –
Press
on the QWERTY keyboard.
Note: If Net Guard is enabled and displayed, press ROAM
(left softkey) to continue and launch the Web. For more
information, see “Net Guard” on page 60.
128
3B. Web and Data Services
Tip: For instant access to the Internet, including the Sprint
home page, Favorites, Recent Pages, and Google search,
use the main screen carousel. See section 2B
“Navigating the Main Screen” on page 42 for details.
While connecting, you may see an animation and a
“Connecting” message.
The SprintWebSM Home Page
Note: The default view for the Browser window is to show the
page at full screen with only the GO/STOP and
TOOLBAR buttons visible.
Tip: To change the default launch page to the last page you
viewed, press TOOLBAR (right softkey) > OPTIONS >
Set as Homepage.
Data Connection Status and Indicators
Your phone displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
Your data connection is active (data is being
transferred). When the triangles are animated,
your phone is transferring data (for example,
when you are opening a Web page); when the
triangles are gray, your phone is connected to
the network but is not currently transferring
data (for example, when you are viewing a
Web page that is completely open). In either
state, you can receive incoming calls.
Your data connection is dormant (no data is being
sent or received. When the arrows are gray, your
phone is connected to the network but is not
currently transferring data. Though not currently
active, when dormant the phone can restart an
active connection quickly; voice calls can be
made and received.
Web and Data
M570.book Page 129 Thursday, June 10, 2010 12:00 PM
If you do not see an indicator, your phone does not
have a current data connection. To launch a
connection, see “Launching a Web Connection” on
page 128.
Data Restrictions
Parental Controls determine what features you have
access to on your phone. (See “Using Parental
Controls” on page 60.)
When you first connect to the Web, access is
confirmed against the current Parental Restrictions. If
data access has been restricted, you will be notified
with an onscreen warning. This feature helps prevent
any accidental data connections. You can disable the
data restriction feature by changing the setting from
within the Parental Controls menu.
3B. Web and Data Services
129
M570.book Page 130 Thursday, June 10, 2010 12:00 PM
Note: To access Parental Controls, the feature must first be
Tip: Depending on which websites you visit, the labels on the
active (page 60).
softkeys may change to indicate their function.
To use softkeys:
To change your Restriction settings:
1. Highlight
and press
> Settings > Parental
Controls > On/Off.
2. Select either:
䡲
On to activate the Parental Control function.
䡲
Off to deactivate the Parental Control function.
3. Select Restrictions > CONTINUE (right softkey) and
change your settings.
䊳
Press a softkey. (If you see an additional pop-up
menu when you press the softkey, select the menu
items using your keypad [if they’re numbered], or
by highlighting the option and pressing
.)
Portrait
Mode
Left
Softkey
Right
Softkey
Navigating the Web
Navigating through menus and websites during a data
session is easy once you’ve learned a few basics. Here
are some tips for getting around:
Softkeys
During a data session, the bottom line of your phone’s
display contains one or more softkeys. These keys are
shortcut controls for navigating around the Web, and
they correspond to the softkeys directly below the
phone’s display screen.
130
3B. Web and Data Services
Landscape Mode
Tip: Pressing
Pressing
jumps to the top of the Web page.
jumps to the bottom of the Web page.
M570.book Page 131 Thursday, June 10, 2010 12:00 PM
Web and Data
Browser Menu
Although the home page offers a broad and
convenient array of sites and services for you to
browse, not all sites are represented, and certain
functions, such as going directly to specific websites,
are not available. For these and other functions, you will
need to use the browser menu. The browser menu
offers additional options to expand your use of the Web
on your phone.
The browser menu or toolbar may be opened anytime
you have an active data session, from any page you
are viewing.
3. Select TOOLBAR from the bottom right to view the
To open the browser menu:
4. Select an available icon to launch and option:
1. Select
and press
MY HOMEPAGE (
) returns the browser to the
SprintWebSM home page.
䡲 MY PAGES (
) accesses your favorite and
recently viewed Web pages.
䡲 SPRINT SEARCH (
) launches the Google®
search engine.
䡲
> Home.
– or –
Highlight
browser menu.
> Web.
2. Select an existing Web page icon from the listing
or enter an address manually at the top of the
page within the search field.
3B. Web and Data Services
131
M570.book Page 132 Thursday, June 10, 2010 12:00 PM
䡲
OPTIONS (
●
●
●
●
●
●
) accesses the Browser options:
Set as Homepage assigns the current Web
page as your new homepage.
Font size allows use of a slider to adjust the
current text size displayed within the browser.
Touch Save to store your new setting.
Send this page to... copies the current Web
address and attaches it to an outgoing text
message.
Clear private data allows you to delete the
current browsing history, browser cache,
cookies, and stored passwords.
Help provides help information related to the
Browser.
Advanced allows you to access additional
Browser menu options such as: Icon Row,
Startup page, Page info, Images on/off, Reset
browser, Turn on error logging, Send referrer,
Redirect prompt, and Reset browser settings.
Scrolling
As with other parts of your phone’s menu, you’ll have to
scroll up and down to see everything on some
websites.
To scroll line by line through websites:
䊳
– or –
Press the keyboard’s up or down directional keys.
See “Navigating Through the Menus” on page 19.
To scroll page by page through websites:
䊳
3B. Web and Data Services
Press the volume buttons on the side of the phone.
Selecting
Once you’ve learned how to use softkeys and scroll,
you can start navigating the Web.
To select onscreen items:
䊳
132
Scroll over the navigation key in an up or down
direction.
Use the navigation key to highlight an item, and
then press the left softkey (or press
).
M570.book Page 133 Thursday, June 10, 2010 12:00 PM
selecting items. This softkey is often labeled “OK.”
If the items on a page are numbered, you can use your
keypad (number keys) to select an item.
Links, which are displayed as underlined text, allow you
to jump to Web pages, select special functions, or even
place phone calls.
Highlight the link and press the appropriate softkey.
Entering Text Into a Search or Text Field
䊳
To return to the home page from any other page:
䊳
Press TOOLBAR (right softkey) and select
䊳
From a currently active Web page, select
(The browser will reload the current page.
Select an onscreen text field or Search field to
display the text input screen.
䊳
Select
Highlight
– or –
key on your phone.
Note: You can also use the
> Home.
– or –
To go back one page:
Press the
.
If the Web browser seems to be malfunctioning or
stops responding, you can usually fix the problem by
simply restarting the browser.
Going Back
䊳
.
Reloading the Web Page
Restarting the Web Browser
To select links:
䊳
Going Home
Web and Data
Tip: You’ll find that the left softkey is used primarily for
Press
and press
> Web.
on the QWERTY keyboard.
key for deleting text (like the
key.)
3B. Web and Data Services
133
M570.book Page 134 Thursday, June 10, 2010 12:00 PM
2. Press TOOLBAR (right softkey) and highlight MY
Going to a Specific Website
To go to a particular website address by entering a URL:
1. Select
> Home.
and press
> Web.
– or –
Press
on the QWERTY keyboard.
2. Scroll to the very top of the Web page and
highlight the Address bar (top)
䡲 Clear any existing address by either typing in the
new data or pressing and holding
or
.
3. Use the keyboard to enter a new URL and
touch
or
.
Note: Not all websites are viewable on your phone.
press ADD (left softkey) > OK to add the currently
active web page to your current Favorites list.
䡲 The newly added bookmark is inserted at the top
of your list.
Note: Bookmarking a page does not store the page contents,
just its address.
Some pages cannot be bookmarked. Whether a
particular Web page may be marked is controlled by its
creator.
Accessing a Bookmark
1. Select
Creating a Bookmark
– or –
Bookmarks allow you to store the address of your
favorite websites for easy access at a later time.
– or –
1. Go to the Web page you want to mark.
134
).
4. Enter a descriptive title for the new Bookmark and
– or –
Highlight
PAGES (
3. Press ADD NEW (left softkey) .
3B. Web and Data Services
Highlight
Press
> Home.
and press
> Web.
on the QWERTY keyboard.
M570.book Page 135 Thursday, June 10, 2010 12:00 PM
2. Press TOOLBAR (right softkey) and select MY
Note: The bookmark containing the Home icon indicates the
current home page.
3. Select an entry from the list to automatically launch
that Web page.
Deleting a Bookmark
1. Select
> Web.
– or –
Press
You can send and receive email and text messages
and participate in Web-based chat rooms right from
your phone. Messaging allows you to stay connected
24 hours a day anywhere on the Nationwide Sprint
Network.
Your phone’s Email application lets you access and
manage multiple email accounts simultaneously in one
convenient location.
– or –
and press
Accessing Messages
Email
> Home.
Highlight
Web and Data
) to open the MY FAVORITES page
that lists all of your bookmarks.
5. Confirm deletion by pressing REMOVE (left softkey).
PAGES (
Getting Started With Email
on the QWERTY keyboard.
2. Press TOOLBAR (right softkey) and select MY
PAGES (
) to open the MY FAVORITES page
that lists all of your bookmarks.
3. Highlight the entry from the list and press OPTIONS
> Email.
– or –
Highlight
and press
> Messages > Email.
2. Read the onscreen text and press CONTINUE
(right softkey).
(right softkey).
4. Highlight Delete this Favorite and press
1. Select
.
3B. Web and Data Services
135
M570.book Page 136 Thursday, June 10, 2010 12:00 PM
3. Select an email provider (such as Yahoo! Mail,
®
Hotmail®, Gmail®, or AOL® Mail) and press the right
softkey.
– or –
Select Work to set up a corporate email account
using either Outlook Web Access from a Microsoft
Exchange Server or the Sprint Mobile Email
connector for direct access.
– or –
Select More... to choose from additional options.
There are many available email options listed, or
you may add your own POP or IMAP email
accounts.
Note: Work Email Setup: Consult your company’s IT
department for required information and permissions
for any Work email accounts. Read the onscreen setup
instructions for additional information about setting up
and using Work email options on your phone.
4. Follow the setup wizard instructions to enter the
required sign-up information and press CONTINUE
(right softkey).
136
3B. Web and Data Services
䡲
Follow any onscreen instructions to complete the
registration process.
Note: The information required to sign in will vary depending
on the email provider you are accessing.
5. If applicable to Work email, read the notice
regarding Mail Push. If you would like to enable
Mail Push, press YES (right softkey). If another
notice appears, review it and press YES (right
softkey) again to enable Mail Push.
Note: Mail Push allows your phone to automatically retrieve
new email messages without having to select the
Check Mail option. When you enable Mail Push, you
will receive an onscreen notice of new email messages.
These notices may be charged as text messages.
Please consult your service plan for details.
M570.book Page 137 Thursday, June 10, 2010 12:00 PM
1. Select
> Email.
– or –
Highlight
>
press
and
Accessing Email
Using Email on your phone is even easier than using
multiple email accounts on your computer. Launch the
application for instant access to all your accounts.
1. Select
> Email.
Messages > Email.
– or –
(The default email
account Inbox is
displayed.)
> Messages > Email.
Highlight
and press
(The default email account Inbox is displayed.)
2. Use your navigation
keys or scroll over to
the Home tab and
press
.
3. Select Add Account.
2. Use your navigation keys or scroll over to the Home
tab and press
5. Read the onscreen text and press CONTINUE
(right softkey).
.
3. Highlight your desired email account and
press
.
Note: The first time you access your Email, you will have the
option of completing a Help program. This series of
screens demonstrates the application’s navigation and
available tools.
4. Follow the
procedures outlined in “Getting Started With Email”
on page 135.
Web and Data
Creating an Additional Email Account
4. Use your keypad and directional keys to read,
manage, and reply to your email messages.
Press Menu (right softkey) to select messaging
options, such as Delete, Reply to Sender, Reply All,
Forward, Attachments, Call Sender, Read More,
Save, or Mark as Unread.
䡲
3B. Web and Data Services
137
M570.book Page 138 Thursday, June 10, 2010 12:00 PM
To view a different email account, use your
navigation or directional keys to select the Home
tab at the top of the screen and select an
available account from there.
䡲 To add a new account, use your navigation key to
select the Home tab at the top of the screen, and
then select Add Account. Follow the instructions in
“Creating an Additional Email Account” on
page 137 to set up a new account.
䡲
Tip: You can also customize your main screen carousel to
provide direct access to your email. See “Personalizing
the Carousel” on page 44.
Downloading Games, Ringers, and
More
You have access to a dynamic variety of downloadable
content, such as games, ringers, screen savers, and
other applications. (Additional charges may apply.)
Follow the basic steps below to access and download
these items.
Accessing the Download Menus
1. Highlight
and press
> My Stuff.
– or –
Note: You can also access certain email accounts through
and press
> Web
the home page. Highlight
and then select Messages > Email > [AOL & AIM Mail,
MSN Hotmail, or Yahoo! Mail]. Follow the onscreen
instructions to enter your account information and
access your email messages.
138
3B. Web and Data Services
Select
> My Stuff.
2. Select a download category (Games, Ringers,
Screen Savers, Applications, or Call Tones), and
then select Get New. (The browser will start and
take you to the corresponding download menu.)
To access the download menus from the Web browser:
1. Select
> Home.
– or –
Highlight
and press
> Web.
– or –
Press
on the QWERTY keyboard.
2. From the home page, select Downloads.
3. Select GAMES, VIDEOS, or TONES to go to the
corresponding download menu. (For more
information on navigating the Web, see
“Navigating the Web” on page 130.)
Selecting an Item to Download
You can search for available items to download in a
number of ways:
䢇 Featured displays a selection of featured items.
䢇 Categories allows you to narrow your search to a
general category. (There may be several pages of
available content in a list. Select Next 9 to view
additional items.)
䢇
Search field allows you to use your keypad to enter
search criteria to locate an item. You may enter an
entire word or title or perform a partial-word search.
Downloading an Item
Once you’ve selected an item, highlight it and
press
, or press OK (left softkey). You will see a
summary page for the item including its title, the
vendor, the download details, the file size, and the cost.
Links allow you to view the License Info page, which
outlines the price, license type, and length of license for
the download, and the Terms of Use page, which
details the Premium Services Terms of Use and your
responsibility for payment.
Web and Data
M570.book Page 139 Thursday, June 10, 2010 12:00 PM
To download a selected item:
1. From the information page, select Buy. (The item
will download automatically. When you see the
SUCCESS screen, you have successfully
downloaded the item to your phone.)
Note: If you have not previously purchased an item, you will
be prompted to create your purchasing profile.
3B. Web and Data Services
139
M570.book Page 140 Thursday, June 10, 2010 12:00 PM
2. Choose one of the following to continue:
Select Listen/View/Run to assign the downloaded
item (or to start, in the case of a game or an
application). Your data session will end, and you
will be redirected to the appropriate phone menu
screen.
䡲 Select Set as to assign a ringer or screen saver to
a phone function.
䡲 Select Shop to browse for other items to
download.
䡲 Press
to quit the browser and return to
standby mode.
䡲
For complete information and instructions on
downloading Games, Ringers, Screen Savers, and
Applications, visit the Digital Lounge at www.sprint.com.
My Content Manager
Whether you purchase your content from your phone
or from your online account management page at
www.sprint.com, My Content Manager stores all of your
purchases and you may download them to your phone
from there.
140
3B. Web and Data Services
My Content Manager is a storage area on the
Nationwide Sprint Network that allows you to store all
your purchased files. The files remain in My Content
Manager until their license terms have expired – even
after you have downloaded the content to your phone.
This provides you with a convenient place to access
information about your downloaded files without
having to store the information in your phone’s
memory.
To access My Content Manager:
1. Select
> Home.
– or –
Highlight
and press
> Web.
– or –
Press
on the QWERTY keyboard.
2. From the home page, select Downloads >
My Content Manager. (You will see a list of your
purchased items.)
M570.book Page 141 Thursday, June 10, 2010 12:00 PM
To download purchased content from My Content
Manager:
Tip: You can also access My Content Manager through the
item and press
. (You will see the information
page for the selected item.)
2. Highlight Download and press
. (The item will
download automatically. When you see the
SUCCESS screen, you have successfully
downloaded the item to your phone.)
3. Choose one of the following to continue:
Select Listen/View/Run to assign the downloaded
item (or to start, in the case of a game or an
application). Your data session will end, and you
will be redirected to the appropriate phone menu
screen.
䡲 Select Set as to assign a ringer or screen saver to
a phone function.
䡲 Select Shop to browse for other items to
download.
䡲 Press
to quit the browser and return to
standby mode.
䡲
Web and Data
and press
> My Stuff >
main menu. Highlight
[Games, Ringers, Screen Savers, Applications or Call
Tones] > My Stuff Manager. The browser will open and
take you to the corresponding content.
1. From the My Content Manager display, highlight an
For complete information and instructions on
downloading Games, Ringers, Screen Savers, and
Applications, visit the Digital Lounge at www.sprint.com.
Applications
You can access a wide variety of applications in many
different categories with your phone and data service.
Your phone comes preloaded with links to the
following applications:
䢇
Google
NASCAR Sprint Cup Mobile
䢇
Sprint Football Live
䢇
䢇
ScanLife
Sprint Social Zone
MySpace
䢇
Facebook
䢇
䢇
3B. Web and Data Services
141
M570.book Page 142 Thursday, June 10, 2010 12:00 PM
Using Google Search
Twitter
䢇
Important Privacy Message – Sprint’s policies often do no
apply to third-party applications. Third-party applications may
access your personal information or require Sprint to disclose
your customer information to the third-party application
provider. To find out how a third-party application will collect,
access, use, or disclose your personal information, check the
application provider’s policies, which can usually be found on
their website. If you aren’t comfortable with the third-party
application’s policies, don’t use the application.
1. From carousel, select
.
2. Use the keyboard to enter a string into the search
field and press
.
NASCAR Sprint Cup Mobile
Now you have the ability to get every bit of NASCAR
coverage, news, and stats right on your phone.
1. Highlight
and press
> My Stuff >
Applications > NASCAR Sprint Cup Mobile.
Google
Launching Google via the Carousel
– or –
This page provides access to Web features such as
Google™ search, online Maps, Gmail™, and
YouTube™.
> My Stuff > Applications > NASCAR
Select
Sprint Cup Mobile.
1. From carousel, select
.
2. Select an onscreen option: Google search, Maps,
Gmail, or YouTube.
3. Follow the onscreen instructions.
142
3B. Web and Data Services
2. Scroll down the list of available NASCAR drivers
and press
to select your desired driver.
3. If prompted, read the permission check disclaimer,
make a selection and press OK (left softkey).
Follow the onscreen instructions until you reach
the main NASCAR Sprint Cup Mobile page.
M570.book Page 143 Thursday, June 10, 2010 12:00 PM
using your navigation key or pressing the
directional keys.
5. Access any of the following onscreen options by
highlighting a button and pressing
. Features
include:
䡲 Home to return to the main NASCAR homepage
where you can view stats on a current race,
choose to follow a specific driver, view special
NASCAR promotions and other NASCAR-specific
multimedia content.
䡲 Point Standings to display the current NASCAR
point standings.
● Press HOME (left softkey) to return to the main
NASCAR page.
䡲 Race Recap provides overviews of the current
races, pictures, commentary, additional photos,
and race stats.
● Press HOME (left softkey) to return to the main
NASCAR page.
Speed displays a list of selectable multimedia
video clips from the SPEED channel that are
specific to NASCAR.
● Press HOME (left softkey) to return to the main
NASCAR page.
䡲 All-Star displays race stats, driver info, news,
photos, etc. for the All-Star race.
䡲 My Driver to customize your NASCAR experience
by following specific drivers. Information includes
driver-specific stats and NASCAR RSS feeds. You
can also get additional stats, review other driver
info, or change drivers.
䡲 Stats/Sched lets you track race information such
as: NSCS Recap, NNS Recap, Point Standings,
Season Stats, and Schdeule.
䡲 Miss Sprint Cup is your insider to NASCAR by
providing news, information, blogs and twitter
updates to the goings-on within NASCAR.
䡲 Video displays a list of selectable multimedia
content. Other features include streaming
multimedia content from NASCAR radio stations
or other racing radio shows.
䡲
3B. Web and Data Services
Web and Data
4. Navigate the main page by either scrolling around
143
M570.book Page 144 Thursday, June 10, 2010 12:00 PM
News & Alerts provides you with quick access to
NASCAR-specific news, photos, and driver stats.
You can also customize alerts for new information
such as ALL NASCAR News, Sprint Cup News,
etc.
䡲 Community where you can connect with other
NASCAR fans directly from your phone.
䡲 Fantasy lets you take part in online fantasy racing,
access Games, take part in Polls, and access
other Special Promotions.
䡲 FanZone displays a list of selectable content
available to Sprint subscribers such as
Sweepstakes and Video clips (footage and
music).
䡲 Settings and Help displays help information for
usage of the NASCAR application and features.
䡲 EXIT (right softkey) allows you to exit the NASCAR
application. Press YES (left softkey) to exit.
䡲
Sprint Football Live
Get the Football live on your phone. It lets you be right
in the middle of your favorite game by being a part of
previews, blogs, discussions groups, fantasy football,
etc.
1. Highlight
and press
> My Stuff >
Applications > Sprint Football Live.
– or –
Select
> My Stuff > Applications > Sprint
Football Live.
2. Select your favorite team.
3. Follow the remaining onscreen instructions to
customize your football experience such as
choosing your favorite team.
4. Access any of the following features by pressing
MENU (right softkey):
䡲
Draft (default home page) displays a screen full of
draft information such as Draft Coverage, Draft
Insider, Exclusive Blog, Mock Drafts, and Draft
Prospects.
144
3B. Web and Data Services
M570.book Page 145 Thursday, June 10, 2010 12:00 PM
Favorite Team launches a team-specific page with
content such as top stories, RSS feeds, Rumor
information, Schedules, Team Alerts, and the
ability to change your favorite team selection.
䡲 News provides AP league news, Rumor and
News, PFTV, Injury Info, Transactions, Legal, and
other football related information, photos and
videos.
䡲 Tweets launches an onscreen Twitter page. Also
included onscreen is a real-time RSS new feed.
䡲 Team Pages allows you select from wither the AFC
or NFC conferences, then display content such as
top stories, RSS feeds, Rumor information,
Schedules, Team Alerts, and the ability to change
your favorite team selection.
䡲 Help/About displays help information for Sprint
Football Live topics such as: General, Home,
News, Twitter, Team Page, About, or Alerts.
ScanLife
With ScanLife, you scan a 2D barcode (EZcode) with
your camera phone and you’re instantly connected to
any information related to the scanned product, article,
or image.
1. Highlight
and press
> My Stuff >
Applications > ScanLife.
– or –
Select
> My Stuff > Applications > ScanLife.
2. Read the terms of use disclaimer, make a selection
and press Agree (left softkey).
You can also press Disagree (right softkey).
Web and Data
䡲
䡲
3. With the camera feature now activated, position the
camera so the EZcode is both centered in the
viewfinder and takes up at least half the screen
area.
䡲 A sample of an EZcode
.
Note: Do not confuse EZcodes with the UPC barcodes
currently used on most products, they are not the same.
4. Take the photo. If the scan was successful, you will
hear a short chime and your browser will then
launch to reveal more information associated with
the selected EZcode. This can be either a specific
Web page or downloadable content.
3B. Web and Data Services
145
M570.book Page 146 Thursday, June 10, 2010 12:00 PM
Sprint Social Zone
MySpace
Social Zone provides users with a web-based social
networking application and community sites that can
help bring social networking to your mobile phone.
MySpace is a popular social networking website that
offers users an interactive portal within which they can
submit personal profiles, blogs, groups, photos, and
music among their peers.
1. Highlight
and press
> My Stuff >
Applications > Social Zone.
Note: Before continuing with these steps you must first have
an active MySpace account which is able to receive
photo uploads.
– or –
Select
> My Stuff > Applications > Social Zone.
2. Navigate among the various social network
applications.
3. Highlight an application and press
. Choose
from: Photobucket, Xanga, Black Planet, Asian
Avenue, MiGente, and Glee.
4. Follow the applications login and usage
procedures.
5. Press OPTIONS (left softkey) > Exit to close the
social zone application.
1. Select
.
2. Select the Email and Password fields and then
enter your information using the keyboard.
3. Highlight Submit and press
to continue onto
the site.
Adding MySpace as a New Place
1. Highlight
and press
> Photos & Videos >
My Photos & Videos to view the MY ALBUM screen.
2. Select an image location (In Phone or Memory
Card).
3. Highlight a picture or video to send and press
146
3B. Web and Data Services
.
M570.book Page 147 Thursday, June 10, 2010 12:00 PM
4. Press SEND (left softkey). (You will see a message
about updating your places list.)
2. Select the Email and
.
6. Select MySpace and use your keyboard to enter
the necessary login information (MySpace login
and password).
Important: To automatically upload all new images and
videos to your designated email address, enable
the “Automatically send...”field.
7. Touch Done to complete the process.
Facebook
Facebook™ is a popular free-access social networking
website where users can join networks organized by
various criteria and then interact with other connected
people. Users can both add friends and send them
messages, as well as update their personal profiles to
notify friends about new ideas, actions, status, etc..
Note: Before continuing with these steps you must first have
an active Facebook account.
.
Web and Data
5. Highlight New Place... and press
1. Select
Password fields and then
enter your information
using the keyboard.
3. Highlight Login and
press
to continue
onto the site.
4. Navigate through the
pages.
Adding Facebook as a
New Place
1. Highlight
and press
> Photos & Videos >
My Photos & Videos to view the MY ALBUM screen.
2. Select an image location (In Phone or Memory
Card).
3. Highlight a picture or video to send and press
.
4. Press SEND (left softkey). (You will see a message
about updating your places list.)
5. Highlight New Place.. and press
.
3B. Web and Data Services
147
M570.book Page 148 Thursday, June 10, 2010 12:00 PM
6. Select Facebook and use your keyboard to enter
Tweets are text-based posts of up to 140 characters,
displayed on the author's profile page and delivered to
other users (or subscribers).
the necessary login information (Facebook login
and password).
Users can send and receive tweets via the Twitter
website, Short Message Service (SMS) or external
applications. The Twitter service may incur data fees.
Uploading Photos to Your Facebook Page
1. Highlight
and press
> Photos & Videos >
My Photos & Videos to view the MY ALBUM screen.
Note: Before continuing with these steps you must first have
2. Select an image location (In Phone or Memory
an active Twitter account.
Card).
3. Highlight a picture or video to send and press
4. Press SEND (left softkey). (You will see a message
about updating your places list.)
5. From the MY PLACES screen, select Facebook and
choose your album to begin queuing your media
file for upload.
.
1. Select
.
2. Select the Username and Password fields and then
enter your information using the keyboard.
3. Highlight Sign In and press
to continue onto
the site.
4. Navigate through the pages.
Twitter
Best of Green
Twitter™ is a free social networking and micro-blogging
service where its users can send and read each others'
updates, known as “tweets”.
With Best of Green, you have instant access to a
collection of green, earth-friendly information and tips.
148
3B. Web and Data Services
1. Select
.
M570.book Page 149 Thursday, June 10, 2010 12:00 PM
press
䡲
:
Five Simple Things to show how you can make a
big difference for the environment by making
simple changes, from how you commute to what
you eat for dinner.
䡲 Green Guides for access to handy guides that will
help you "green" your life with ease, and
understand why.
䡲 Green Glossary to learn every word and
explanation you need to know about the Earth
and climate change--from acid rain to wind
power, this is your go-to green glossary.
䡲 All Things Green to find up-do-date green
headlines, green websites, links to downloadable
content, and green text alert options.
Data Services FAQs
How will I know when my phone is ready for data service?
Your user name (for example, bsmith01@sprintpcs.com)
will be displayed when you access Menu > Settings >
Phone Information > Phone Number/User ID.
Web and Data
2. Highlight one of the following options and
How do I sign in for the first time?
You are automatically signed in to access data services
when you turn on your phone.
How do I know when my phone is connected to data
services?
Your phone automatically connects when you use data
service or an incoming message arrives. You will also
see the
or
indicator.
Can I make calls and use data services at the same time?
You cannot use voice and data services
simultaneously. If you receive a call while data service
is active, your phone forwards the call to voicemail. You
can place an outgoing call anytime, but it will interrupt
any in-progress data session.
3B. Web and Data Services
149
M570.book Page 150 Thursday, June 10, 2010 12:00 PM
When is my data connection active?
Your connection is active when data is being
transferred. Outgoing calls are allowed; incoming calls
go directly to voicemail. When active, the
or
indicator is animated on the display screen.
When is my data connection dormant?
If your phone receives no data for 10 seconds, the
connection goes dormant. When the connection is
dormant, you can make and receive voice calls. (The
connection may become active again quickly.) If your
phone receives no data for an extended period, the
connection will terminate.
Can I sign out of data services?
You can sign out without turning off your phone;
however, you will not be able to browse the Web or use
other data services. While signed out, you can still
place or receive phone calls, check voicemail, and use
other voice services. You may sign in again at any time.
To sign out, go to
> Settings > Others > Data>
On/Off > Disable Sprint Data Services in your phone’s
menu.
150
3B. Web and Data Services
M570.book Page 151 Thursday, June 10, 2010 12:00 PM
⽧
TV (page 151)
⽧
Music – Sprint Music Store (page 154)
⽧
Streaming Music (page 160)
Sprint TV gives you the ability to listen to audio clips
and to view video clips right from your phone’s display.
Watch live TV and catch up on episodes of your
favorite shows – anywhere on the Nationwide Sprint
Network.*
Sprint Music lets you preview, purchase, download, and
listen to over a million songs right on your phone. You
can even add songs from your own library to round out
your on-the-go playlist.
TV
Your Sprint TV Channel Options
The Sprint TV application offers a wide variety of
accessible channels. Subscription options include
comprehensive basic packages as well as a full menu
of “a la carte” channels. Visit www.sprint.com/tvguide for
more information on channels and pricing.
Some of the available categories may include:
䢇 Sprint Radio
䢇 Sprint Power View
䢇 Primetime TV
䢇 Music Videos
䢇 Sprint TV Live
䢇 Music & Radio
䢇 Sports
䢇 Entertainment
䢇 Cartoons
䢇 News & Weather
䢇 Movies & Shorts
䢇 Mobile Previews
Note: Available categories and content are subject to change.
3C. Entertainment: TV and Music
151
TV and Music
3C. Entertainment:
TV and Music
* Sprint TV coverage not available everywhere. Content and
lineup subject to change. Select channels also available
for casual usage. Visit www.sprint.com/tvguide for more
information.
M570.book Page 152 Thursday, June 10, 2010 12:00 PM
Watching TV
1. Highlight
and press
> Entertainment >
Sprint TV > TV. Depending on your settings, your
phone may prompt you to accept a data
connection.
2. Select Featured, Recommended, Recently Played,
All Channels, Live, or On Demand to display channel
options.
3. Navigate around by either scrolling up over your
navigation key or using your keyboard’s directional
keys and press the channel icon to view the
current channel from the Sprint TV listings or to
select an available category. Current channel will
continue to play on top till you select another
channel.
Note: The first time you access a channel, the system will
prompt you to purchase access (unless the channel
doesn't have a monthly fee). Select Subscribe to
purchase access, or select Preview to view a preview
of the selected channel.
4. If applicable, highlight a clip and press
to view
the program. The clip will automatically load and
begin playing.
152
3C. Entertainment: TV and Music
Tip: While you are playing a clip, you can press the navigation
key up or down to surf to a different channel. You will see
a small pop-up screen that tells you which channel you
are watching as well as other channels that you have
access to. Use the navigation key to scroll through the
channels. Once you find a channel that you want to
watch or listen to, scroll to it and press
(or simply wait
approximately three seconds), and the channel will begin
loading.
TV FAQs
1. Will I know if I’m receiving an incoming call while I’m
viewing or listening to a media clip?
Yes. All incoming calls will stop the Sprint TV app
and provide you with the option to either SILENCE
(left softkey) or IGNORE (right softkey). The Sprint
TV application will start from beginning after
rejecting or ending the call. All interruptions such
as a new message / Voicemail / Alarm / Calendar
notifications stops the Sprint TV app and provides
you with the corresponding notification. The Sprint
TV application will start from beginning after
returning back from the notifications.
M570.book Page 153 Thursday, June 10, 2010 12:00 PM
time it will take to play the clip prior to accessing it?
Once you have selected a channel, you will see a
listing of the available clips, with each clip’s length
displayed after the clip’s title. In general, a clip’s
duration will depend on the story or content being
provided, and can be fairly short or as long as a
few minutes.
3. Can I access a clip wherever I am, as long as I have
my phone?
As long as you are on the Nationwide Sprint
Network, you will have access to the audio and
video clips.
Note: Sprint TV service does not work while roaming off of
the Nationwide Sprint Network or where service is
unavailable.
4. Are the videos that I’m viewing “live” videos?
It depends on the content provider. Some of the
channels available through Sprint TV stream live
content. Others provide media on demand with
video and audio clips that are refreshed throughout
the day, but that are not “live.”
5. After purchasing access to an Available Channel for a
monthly fee, do I receive any confirmation? That is,
how do I know it has been purchased?
The next time you access the channel, you bypass
the Preview/Purchase page and go directly to the
available content.
6. If I don’t subscribe to a data plan, will I still be able to
TV and Music
2. How long are the clips? Will I know the estimated
view the multimedia clips?
Yes. For service access charges, please consult
your Sprint service plan or visit www.sprint.com.
7. What does it mean when the video pauses and I see
the word “loading” at the bottom of the screen?
This happens when the phone is loading the data
necessary to play the clip. It typically occurs when
there is heavy traffic on the network.
8. How can I cancel service if I decide I don’t want it?
To cancel your Sprint TV service, visit
www.sprint.com and sign on to My Sprint with your
account number and password. From this page,
you have the ability to cancel the service or any
channels to which you subscribe.
3C. Entertainment: TV and Music
153
M570.book Page 154 Thursday, June 10, 2010 12:00 PM
9. If I put on my stereo headset and insert it into the
phone’s headset jack, can I close the phone while I
am playing an audio (or video) clip without
interrupting the clip?
Yes. When you insert your stereo headset into the
phone’s headset jack, the phone automatically
goes into “headset mode,” allowing you to close
the phone and continue playing the clip. (Likewise,
if your phone is in “headset mode,” a phone call
will not disconnect when you close the phone.)
10. Can I surf to a different channel while I am playing a
clip?
Yes. While you are playing a clip, you can use the
up and down navigation keys to surf to a different
channel. You will see a small pop-up screen that
tells you which channel you are watching as well
as other channels that you have access to. Use the
navigation keys to scroll through the different
channels. Once you find a channel that you want
to watch, scroll to it and press
(or simply wait
approximately three seconds), and the channel will
begin loading.
Music – Sprint Music Store
The Sprint Music Store lets you purchase and download
digital music files to play on your phone or computer.
Note: A microSD memory card must be inserted in the
phone prior to using the Sprint Music function.
Accessing the Sprint Music Store
You can access the Sprint Music Store right from your
phone’s main menu, anywhere on the Nationwide
Sprint Network. When you enter the store for the first
time, the system will prompt you to set up your user
identification and password.
1. Highlight
and press
> Entertainment >
Music.
2. If prompted, follow the onscreen instructions to
establish your User ID and password.
Tip: Your User ID for the Sprint Music Store is your 10-digit
wireless phone number. The password may be any
4-digit number.
3. After you have entered your password, highlight
Create New Account and press
154
3C. Entertainment: TV and Music
.
M570.book Page 155 Thursday, June 10, 2010 12:00 PM
store.
Note: With a formatted microSD card, there are no default
folders created. Upon access to the Music Player, the
Music/Tone folders are also created.
Purchasing and Downloading Music
Now that you’re in the store, you can shop for songs to
purchase and download to your phone’s microSD card.
1. From the Sprint Music Store opening page, press
Menu (right softkey) and select Store Search to
browse the store. Other options include:
䡲 Home to navigate to the music store home page.
䡲 Now Playing to display the information on the
current file being played.
䡲 My Library displays a list of your currently
available music files.
䡲 Store Search gives you the option of searching for
specific songs or artists. Just use your keypad to
enter your search criteria in the available field.
2. Highlight a song and press
. (You will see the
song information screen.)
3. Highlight an option and press
:
䡲
Preview to play an audio clip of the selected song.
䡲
Buy Song to purchase the song and download it
to your phone’s microSD card.
● When you select Buy Song, the file will
download to your phone’s microSD card. (If
there is no microSD card installed or if there is
not enough free memory space on the card,
you will see an alert.)
● Once the song has been downloaded to your
microSD card, you will see options allowing
you to listen to the song, add it to a playlist, or
continue shopping.
TV and Music
4. Use your keypad and navigation key to explore the
Playing Music From the Sprint Music Store
The Sprint Music Store not only gives you access to
great music, it also gives you a place to listen to and
organize your music library.
3C. Entertainment: TV and Music
155
M570.book Page 156 Thursday, June 10, 2010 12:00 PM
Accessing the Music Player Configuration
Accessing the Music Player
1. From the Sprint Music Store opening page, press
Menu (right softkey) and select My Library.
䡲
If prompted, highlight
Update My Library
2. Highlight My Library
.
3. Make your selection
based on category
types or use the
Search field to look for a specific music file.
4. To play a song, highlight it and press
(Highlight
Music.)
and press
.
Music Store
opening page, press
Menu (right softkey)
and select My
Library.
䡲 Select Update My
Library and press
OK to update the
content of your
current library (if
new material was
recently added).
3. Select a category.
4. Highlight a file and press
song.
156
3C. Entertainment: TV and Music
> Entertainment >
2. From the Sprint
and press
to
re-index your
microSD card’s
Music folder and list
all available music
files.
and press
1. Launch the Sprint Music Store application.
to play the selected
M570.book Page 157 Thursday, June 10, 2010 12:00 PM
and select an option:
䡲 View Tracklist display information for the currently
playing song.
䡲 Add to Playlist inserts the current song into a
previously created playlist.
䡲 Switch shuffle on/off toggles the activity state of
the shuffle feature that randomly selects different
songs from your currently available music files.
䡲 Switch repeat on/off toggles the activity state of
the repeat function that repeats the current song
once completed.
䡲 Delete Track to delete the track from your current
list of available music files. From the confirmation
screen, press OK (left softkey) to confirm deletion
or CANCEL (right softkey) to quit this operation.
䡲 Exit to exit the music player application.
To create a playlist:
1. From the My Library screen, select Playlists >
3. Press DONE (right softkey) to complete the creation
process and return to the MY MOBILE PLAYLIST
screen.
Backing Up Your Downloaded Music Files
Sprint recommends you back up your downloaded
music files to your computer. Although the downloaded
files can only be played on your phone and on your
account, backing them up to your computer lets you
access the files in case your microSD card is lost or
damaged, or if you install a new microSD card.
See “Connecting Your Phone to Your Computer” on
page 95.
TV and Music
5. From the Player display, press Menu (right softkey)
1. Connect your phone using a USB cable or the
built-in connection on Bluetooth-enabled phones.
2. Use your computer to navigate to the microSD
card’s Music folder.
3. Select and copy the music files to a folder on your
computer’s hard drive.
Create Mobile Playlist. > Add Tracks.
2. From the ALL TRACKS screen, select the songs
you want to add to the new playlist.
3C. Entertainment: TV and Music
157
M570.book Page 158 Thursday, June 10, 2010 12:00 PM
Note: Although you can store purchased and downloaded
music files on your computer, they will only be playable
on your phone and on your account.
If you copy the files to a new microSD card, you will
need to create a folder on the card called “Music” to be
able to play the music files.
Multitasking
Multitasking is a way of maintaining one application
active while using another. While your current music
selection is playing, you can activate the Application
Manager screen and choose from a list of available
applications which can be run in tandem with your
music.
To multitask on your phone:
1. Launch the Sprint Music Store application.
(Highlight
Music.)
and press
> Entertainment >
2. From the Sprint Music Store opening page, press
Menu (right softkey) and select My Library.
158
3C. Entertainment: TV and Music
3. Highlight a file and press
to play the selected
song.
4. Press
to exit the Music Store application
without closing it and launch the popup menu,
where you can choose from the following options:
Resume, Exit, App.Manager, and Send to
Background.
䡲 If you press
from the DO YOU WANT TO EXIT
screen, the phone will reactivate the song’s
playback screen and resume playback.
5. Highlight App. Manager and press
to launch an
Application Manager screen which provides you
access to several applications:
䡲 Application Manager manages all currently active
applications. With your music still playing, the
Sprint Music Store entry appears in the list.
M570.book Page 159 Thursday, June 10, 2010 12:00 PM
softkey) to access the
following
management options:
䡲
Bring to Foreground
reactivates the
current application
screen. For example,
if your music is
currently playing in
the background,
selecting this option
activates the Player
tab with the song
displayed.
䡲 Exit Application terminates the currently selected
application and returns you to the standby screen.
䡲 Exit All Background terminates all currently active
applications and returns you to the standby
screen.
䡲 Launch New App allows you to launch an
application from the My Stuff listing.
Receiving an Incoming Call While Playing Music
An incoming call pauses the
currently playing music file
while the phone call is
active. Once you end the
call, the paused music
resumes playing
automatically.)
1. Answer an incoming
call by highlighting
Answer and pressing
.
TV and Music
6. Press OPTIONS (right
– or –
Press
.
2. When you are done with your call, press
to
end the call. The previously paused application
then resumes.
Note: When placing an outgoing call, the Application
Manager pauses your current music playback and
allows you to proceed with your outgoing call. When
you end the call, the Application Manager restarts the
music playback.
3C. Entertainment: TV and Music
159
M570.book Page 160 Thursday, June 10, 2010 12:00 PM
If the phone is running more than one simultaneous
application (such as Music Store, Application [from My
Stuff], and Games), the user interface can begin to slow
down and result in music or sound interruptions.
䢇 To solve this type of issue, it is best to close down all
other applications (highlight
and press
>
My Stuff > Application Manager > Options > Exit All
Background) before initiating a new application.
Also, in some situations, the camera or camcorder may
have limited functionality or become unavailable. For
example, if you were currently playing music (via the
Music Store), or playing a game in the background,
and then wanted take a photo, the phone may prompt
you with a “CPU Low, Kill the Application” dialog.
This indicates that the current phone resources are low
and you should terminate one of the current
applications before continuing. Refer to the procedure
above to exit either a specific application or all current
applications, and then launch the camera or
camcorder again.
160
3C. Entertainment: TV and Music
Streaming Music
In addition to the Sprint Music Store, Sprint offers a
variety of musical options through the Music category
in the Sprint TV menu, including SIRIUS Music, Music
Choice, VH1, and many others. Choose from rock, pop,
hip-hop, and R&B, and access exclusive video clips,
music industry news, performances, and interviews
with your favorite artists.
1. Highlight
and press
> Sprint TV > Radio >
[selection].
The keyboard directional keys (up/down/left/right)
are best suited for navigation around this screen
and among the various stations.
䡲 To make a selection using the keyboard, highlight
an station and press
.
䡲
Note: If a streaming type (TV, Radio, etc..) can not be selected
via the directional arrows, scroll using the navigation
key.
M570.book Page 161 Thursday, June 10, 2010 12:00 PM
2. Select Preview to see and hear a preview of your
selected channel (if available).
– or –
TV and Music
Select Subscribe to purchase a monthly
subscription to your selected channel.
䡲 Once you have purchased access to a music or
radio channel, you can select from a variety of
stations to listen to your favorite music or get
caught up on what’s new in music.
3. From the station preview window you can choose
from several onscreen options:
Information to display station information.
䡲 Channel listing to display the available channel
listing at the bottom of the current preview
window.
䡲 Add to favorites to add the current station to your
favorites list.
䡲 Scale to rescale the current song album art.
䡲
3C. Entertainment: TV and Music
161
M570.book Page 162 Thursday, June 10, 2010 12:00 PM
1. Highlight
3D. GPS Navigation
and press
> Settings > Location.
(You will see the Location disclaimer.)
2. Read the disclaimer and press OK (left softkey).
3. Highlight On and press
⽧
GPS Services (page 162)
⽧
Sprint Navigation (page 162)
⽧
Sprint Family Locator (page 164)
⽧
Getting Driving Directions (page 164)
⽧
Configuring Your Navigation Preferences (page 170)
⽧
Launching the Product Tour (page 172)
GPS Services
.
4. Press DONE (left softkey) to complete the process.
Sprint Navigation
Sprint Navigation gives you turn-by-turn directions
onscreen and over speakerphone.
Note: Depending on your service plan, Sprint Navigation may
require a monthly subscription. Contact Sprint for
information and pricing.
Note: Some features may be available only with a
Your phone’s built-in GPS capability gives you access
to a number of location-based services, including
Sprint Navigation and Sprint Family Locator.
Activating Location Mode
Before using any of the location-based services, you
must turn on your phone’s location mode.
162
3D. GPS Navigation
subscription to Sprint Navigation Premium.
Registering Sprint Navigation
Before you can use Sprint Navigation, your phone and
service must be registered.
M570.book Page 163 Thursday, June 10, 2010 12:00 PM
and press
> Maps > Sprint
Navigation.
– or –
Select
> Drive To.
2. Read the onscreen terns and Conditions and
press Accept (right softkey) to agree to these terms
of service.
3. Follow the onscreen instructions to enter and
submit the required information.
Using Sprint Navigation
1. Highlight
and press
> Maps > Sprint
Navigation.
2. Select an option and follow the onscreen
instructions to get directions or view maps.
Drive To lets you enter an address (vocally or
using the keypad) or select from categories such
as:
● My Favorites: user-defined favorite locations.
● Recent Places: recently entered locations.
● Address: manually entered street addresses.
䡲
Intersection: used to locate a specific address
by using two separate street addresses to
identify an intersection.
● City: used when you do not know a physical
address but would like driving directions to a
city.
● Business: locations based on business
categories.
● Airport: local airports based on current GPS
location.
䡲 Search lets you search for locations based on
Name, Category, or Location. You can choose
Type it or Speak it to begin your search.
● Category entries include options such as
Food/Coffee, Gas Stations, Gas by Price,
Banks/ATMs, WiFi Spots, Parking Lots, Hotels
& Motels, and Movie Theaters.
䡲 Maps & Traffic lets you view maps and get traffic
information for your current location or for any
other location (same categories as Drive To).
●
3D. GPS Navigation
GPS Navigation
1. Highlight
163
M570.book Page 164 Thursday, June 10, 2010 12:00 PM
䡲
Share & More offers additional options, such as
sharing your location with contacts, creating and
storing My Favorites locations, accessing the
product tour, and setting detailed application
preferences.
Note: For more information about Sprint Navigation, visit
www.sprint.com/navigation.
Note: You can also sign up for Sprint Family Locator online at
www.sprint.com/familylocator.
Using Sprint Family Locator
1. Highlight
and press
> Maps > Sprint
Family Locator.
2. Enter the parent phone number and password to
Sprint Family Locator
sign in to your account.
3. Select a phone to locate from the available child
Sprint Family Locator uses GPS technology to locate
your child’s phone and display the location on an
interactive map.
Note: Sprint Family Locator service requires an additional
monthly fee. Visit www.sprint.com/familylocator for
complete details.
Signing Up for Sprint Family Locator
1. Highlight
and press
> Maps > Sprint
Family Locator.
2. Follow the onscreen instructions to enter and
submit the required information.
164
3D. GPS Navigation
phone list.
4. When you are finished, select Sign Out.
Note: You may also use Sprint Family Locator with any
computer with an Internet connection. Visit
www.sprint.com/familylocator for complete details.
Getting Driving Directions
The built-in GPS hardware (when enabled) allows you
to get driving directions to selected locations or
establishments based on your current location.
M570.book Page 165 Thursday, June 10, 2010 12:00 PM
Using a Physical Address
and press
> Maps > Sprint
Navigation > Drive To.
– or –
Select
> Drive To.
2. Highlight Address and press
.
3. Highlight Type It and press
.
䡲 Type It requires that you enter the physical
address using either the keypad or keyboard.
䡲 Speak It to place a call to the TeleNav™ operator
where you will speak the desired address. This is
similar to calling 411 for directory assistance. (A
fee may be incurred.)
5. Press GO (right softkey) to enter the new address
and receive driving directions from the GPS
network.
6. Press
to begin the navigation session.
Note: When similar address matches are found, select the
appropriate match and press
.
7. Follow both the onscreen and audio directions.
4. If typing in the address, enter the following:
䡲
Address: used to enter a specific address by
GPS Navigation
1. Highlight
As you enter in the text, a list of possible city
matches appears onscreen. Use your
navigation key to choose one and press
.
䡲 State, ZIP or Country used when the specific
address information is not available but you
would like to provide some general driving
parameters.
●
using a number, street name, and city/state or zip
code.
䡲 City: used when you do not know a physical
address but would like driving directions to a city.
3D. GPS Navigation
165
M570.book Page 166 Thursday, June 10, 2010 12:00 PM
To review real-time traffic information along your route:
Estimated Distances
(per segment & total)
Magnification
1. Highlight
and press
> Maps > Sprint
Navigation > Drive To.
– or –
Select
> Drive To.
2. Highlight Address and press
Your Current Location
.
3. Enter the physical address information. See “Using
a Physical Address” on page 165.
4. Press Options (right softkey) > Traffic Summary and
No GPS Signal
Other Driving Options
Navigation Screen
Once you have entered your desired location and your
phone has begun providing you with driving directions,
you can alter the information being displayed by using
one of three other driving options, press Option (right
softkey): 3D Moving Maps, 2D Moving maps, Turn Icons,
Recalculate route, Map Summary, Route Summary, Traffic
Summary, and Search Along.
166
3D. GPS Navigation
press
. This action displays onscreen current
traffic conditions along your current route.
5. Press Back (left softkey) to return to your previous
driving screen.
To receive turn by turn directions (2D):
1. Highlight
and press
> Maps > Sprint
Navigation > Drive To.
– or –
Select
> Drive To.
2. Highlight Address and press
.
M570.book Page 167 Thursday, June 10, 2010 12:00 PM
a Physical Address” on page 165.
4. Press Options (right softkey) > 2D Moving Maps and
press
. This action provides both an outlined
map view and a detailed turn by turn description
for navigating to your desired location.
To search nearby locations based on type:
1. Highlight
and press
> Maps > Sprint
Navigation > Drive To.
1. Highlight
and press
.
3. Enter the physical address information. See “Using
a Physical Address” on page 165.
4. Press Options (right softkey) > Search Along and
press
. This allows you to then search for a
location based on a name, location, or category
such as Food/Coffee, etc.
䡲 See “Using a Local Business Category” on
page 167.
> Maps > Sprint
Navigation > Drive To.
– or –
> Drive To.
2. Highlight Business and press
> Drive To.
2. Highlight Address and press
The Restore™ can also cross-reference your current
location with local business and points of interest, such
as Grocery Stores, Gas Stations, Wi-Fi Spots, Malls,
Hospitals, etc.
Select
– or –
Select
Using a Local Business Category
.
3. Select a desired field and then use either your
keypad or keyboard to enter the information.
What lets you use a keyword search for your
business.
䡲 Category lets you refine your search by using a
business category type such as: Food/Coffee,
Gas Stations, Banks/ATMs, WiFi Spots, Parking
Lots, Hotels & Motels, etc...
䡲
3D. GPS Navigation
GPS Navigation
3. Enter the physical address information. See “Using
167
M570.book Page 168 Thursday, June 10, 2010 12:00 PM
䡲
Where returns you to the Search Near page where
you can choose from a set of seven location
categories.
● Entries with more than one available category
(a subcategory) appear with an adjacent gray
arrow. These entries can be expanded and
then closed.
1. Select a category entry from the Search page. By
default the Search Results page lists the Best
Matches based on closest location first (top).
.
filter options to best display the matching results:
Map Results: overlaps your current list over a map
of your current location. The numeric onscreen
entries correspond to your current sorted list.
䡲 Sort by Relevance: sorts a list of matching results
by placing the most likely match (to your present
search criteria) at the top and least likely at the
bottom.
168
3D. GPS Navigation
To search for the least expensive gas in your area:
1. Highlight
and press
> Maps > Sprint
Navigation > Search > Type It > Category > Gas By
Price.
Select
> Search > Type It > Category > Gas By
Price.
2. Select a grade of gasoline: Any, Regular, Plus 89,
3. Press Options (right softkey) to apply the available
䡲
More Results: sorts the results by additional
criteria.
– or –
To organize and arrange your search results:
2. Highlight an onscreen location and press
䡲
Premium, or Diesel.
䡲
By default the Search Results page lists the Best
Price at the top of the list.
3. Highlight Search and press Go (right softkey).
4. Highlight a gas station from the list, and press
5. With the destination information onscreen, press
Options (right softkey) and select Drive To to be
provided with a new route to the selected gas
station.
䡲 See “Using a Physical Address” on page 165.
.
M570.book Page 169 Thursday, June 10, 2010 12:00 PM
Once you have begun using Sprint Navigation to find
your destination, you can then either recall those
locations and add them to your list of favorite
destinations or create a new entry from one of the
available location categories (Address, Business,
Airport, or Contacts).
To create a My Favorites entry from your Current Location:
1. Highlight
and press
> Maps > Sprint
Navigation > Share & More > Record Location.
– or –
Select
> Share & More > Record Location.
2. Press GO (right softkey) and enter a label for the
newly stored location.
3. Press GO (right softkey).
To create a My Favorites location from a Recent Place:
1. Highlight
and press
> Maps > Sprint
Navigation > Drive To > Recent Places.
– or –
Select
2. Select an entry from the list and press Options
(right softkey) > Save as Favorite.
3. Enter a label for the newly stored location.
4. Select the Save field.
Sharing a Recent Location with Others
Recently queried locations can be saved to your My
Favorites list and also shared with other cellular
devices.
1. Highlight
and press
> Maps > Sprint
Navigation > Share & More > Share Address.
GPS Navigation
Creating a My Favorites Location
– or –
Select
> Share & More > Share Address.
2. Highlight the Address field and press
.
3. Select a category from the Share Address page,
such as your Current Location, My Favorites
location, Recent Places, etc..
4. Highlight an address and press
. You are then
returned to the previous Share Address page.
> Drive To > Recent Places.
3D. GPS Navigation
169
M570.book Page 170 Thursday, June 10, 2010 12:00 PM
5. Select a recipient by selecting the Sent To field,
pressing
, and then choosing from one of the
following options:
䡲 Use either the keypad or keyboard to manually
enter the recipients phone number.
– or –
䡲 Choose an existing Contacts entry and
press
.
● Select from Contacts to use the Find search
field to select a recipient from your Contacts
(qualifying Contacts entries must contain a
wireless phone number).
Note: Only Contact entry numbers that are associated to a
Mobile profile are allowed to receive this address
information. The target phone number must be
assigned to a Mobile profile.
6. Select Continue (right softkey) to store the
recipients and return to Share Address page.
7. Select Send Now to complete the delivery process.
170
3D. GPS Navigation
Configuring Your Navigation
Preferences
1. Highlight
and press
> Maps > Sprint
Navigation > Share & More > Preferences.
– or –
Select
> Share & More > Preferences.
2. Scroll down the list and select an entry to change
its current setting:
General: allows you to configure application
settings such as:
● My Name: allows you to alter the current first
and last name registered with the service.
● Region: allows you to select your current
region. Default: North America.
● Language: allows you to change the language
currently used for announcements. Default is
English (US).
● Distance Units: allows you to alter the
descriptions used for distances: Miles/Feet
(Miles/Feet) or Kilometers/Meters.
䡲
M570.book Page 171 Thursday, June 10, 2010 12:00 PM
Moving Maps: allows you to select the default
map type displayed for your navigation: 3D
Moving Maps or 2D Moving Maps.
● Backlight: allows you to configure the
Backlight setting between On, Off, or On at
Turns.
● Traffic Alerts: allows you to either enable (On)
or disable (Off) real-time traffic alerts along
your current route.
䡲 Navigation Audio: allows you to choose whether
the street names are announced during your
navigation.
● Settings: allows you to configure the level of
audio detail given for directions. Options
include: Full Audio, Instructions Only, or No
Audio.
● Guide Tone: allows you to configure a voice
type of the audio readout. Options include
Sara(English) or Maria(Spanish).
●
3D. GPS Navigation
171
GPS Navigation
Help Card: allows you to configure the settings
for the onscreen help message (card).
Options include: Always On or Always Off.
● Exit after (minutes): turns the application off
after there has been no activity for 20 minutes.
● Map Colors: allows you to configure the
appearance of the onscreen map. Options
include: Auto, Daytime, or Nighttime.
● Init Volume: allows you to assign the initial
default volume level for the audio readout.
Options include: Normal, Very Soft, Soft, Loud,
and Very Loud.
䡲 Navigation: allows you to configure navigationrelated parameters such as:
● Route Style: allows you to choose the method
which is used to provide you directions from
Point A to Point B. The default is Fastest route.
Choose from one of the following options:
Fastest, Shortest, Prefer Streets, Prefer
Highway, Pedestrian, or Ask me each trip.
● Avoid: allows you to specify those in-route
obstacles that should be avoided during
configuration of the best route. Options
include: HOV Lanes, Tolls, and Traffic Delays.
●
M570.book Page 172 Thursday, June 10, 2010 12:00 PM
Speech Input: allows you to configure how the
application handles spoken input into the system.
● Input Method (available with Sprint Navigation
Premium): to enter input data into the system.
Options are Speak In Directly or Call In.
● Address Input: to determine how address data
is input into the system. Options are Always
Ask, Always Speak In, or Always Type In.
● Search Input: to determine how search data is
input into the system. Options are Always Ask,
Always Speak In, or Always Type In.
䡲 Opt-in Features (available with Sprint Navigation
Premium): allows you to enable/disable additional
customer deals/offers. Options are: Messages
from Merchant, Deals, Menu, or Sponsored Results.
䡲
Launching the Product Tour
䊳
Highlight
and press
> Maps > Sprint
Navigation > Share & More > Product Tour.
– or –
Select
172
> Share & More > Product Tour.
3D. GPS Navigation
M570.book Page 173 Thursday, June 10, 2010 12:00 PM
Section 4
Safety and Warranty
Information
M570.book Page 174 Thursday, June 10, 2010 12:00 PM
4A. Important Safety
Information
⽧
General Precautions (page 174)
⽧
Maintaining Safe Use of and Access to Your Phone
(page 175)
⽧
Using Your Phone With a Hearing Aid Device (page 176)
⽧
Caring for the Battery (page 178)
⽧
Radio Frequency (RF) Energy (page 179)
⽧
Owner’s Record (page 181)
⽧
User Guide Proprietary Notice (page 181)
This phone guide contains important operational and
safety information that will help you safely use your
phone. Failure to read and follow the information
provided in this phone guide may result in serious
bodily injury, death, or property damage.
174
4A. Important Safety Information
General Precautions
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
䢇 To maximize performance, do not touch the bottom portion
of your phone where the internal antenna is located while
using the phone.
䢇 Speak directly into the mouthpiece.
䢇 Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the
power off and remove the battery.
䢇 Do not expose your phone to direct sunlight for extended
periods of time (such as on the dashboard of a car).
䢇 Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending, or sitting on it.
䢇 Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this
equipment.
Note: For the best care of your phone, only Sprint-authorized
personnel should service your phone and accessories. Failure
to do so may be dangerous and void your warranty.
M570.book Page 175 Thursday, June 10, 2010 12:00 PM
Do Not Rely on Your Phone for Emergency Calls
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from wireless
phones may affect inadequately shielded electronic
equipment.
Mobile phones operate using radio signals, which cannot
guarantee connection in all conditions. Therefore you should
never rely solely upon any mobile phone for essential
communication (e.g., medical emergencies). Emergency calls
may not be possible on all cellular networks or when certain
network services or mobile phone features are in use. Check
with your local service provider for details.
RF signals may affect improperly installed or inadequately
shielded electronic operating systems or entertainment
systems in motor vehicles. Check with the manufacturer or their
representative to determine if these systems are adequately
shielded from external RF signals. Also check with the
manufacturer regarding any equipment that has been added to
your vehicle.
Using Your Phone While Driving
Consult the manufacturer of any personal medical devices,
such as pacemakers and hearing aids, to determine if they are
adequately shielded from external RF signals.
Talking on your phone while driving (or operating the phone
without a hands-free device) is prohibited in some jurisdictions.
Laws vary as to specific restrictions. Remember that safety
always comes first.
Tip: Purchase an optional hands-free accessory at your local Sprint
Store, or call Sprint at 1-866-866-7509. You can also dial # 2 2 2
on your phone.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in areas
where use is forbidden or when it may cause interference or
danger.
Note: Always turn off the phone in healthcare facilities, and request
permission before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have
permission from a crew member to use your phone while
the plane is on the ground. To prevent any risk of interference,
FCC regulations prohibit using your phone while the plane is in
the air.
4A. Important Safety Information
175
Important Safety Information
Maintaining Safe Use of and Access
to Your Phone
M570.book Page 176 Thursday, June 10, 2010 12:00 PM
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone
off when in a blasting area or in other areas with signs
indicating two-way radios should be turned off. Construction
crews often use remote-control RF devices to set off explosives.
Turn your phone off when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your phone
and accessories could generate sparks. Sparks can cause an
explosion or fire, resulting in bodily injury or even death. These
areas are often, but not always, clearly marked. They include:
䡲 Fueling areas such as gas stations.
䡲 Below deck on boats.
䡲 Fuel or chemical transfer or storage facilities.
䡲 Areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
䡲 Any other area where you would normally be advised to
turn off your vehicle’s engine.
Note: Never transport or store flammable gas, flammable liquids, or
explosives in the compartment of your vehicle that contains
your phone or accessories.
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as
they could hurt themselves and others, damage the phone or
make calls that increase your Sprint invoice.
176
4A. Important Safety Information
Please Note the Following Information When Using Your
Handset
1. WARNING REGARDING DISPLAY
䡲
The display on your handset is made of glass or acrylic
and could break if your handset is dropped or if it
receives significant impact. Do not use if screen is broken
or cracked as this could cause injury to you.
2. WARRANTY DISCLAIMER: PROPER USE OF A TOUCH
SCREEN HANDSET
If your handset has a touchscreen display, please note
that a touchscreen responds best to a light touch from
the pad of your finger or a non-metallic stylus. Using
excessive force or a metallic object when pressing on the
touchscreen may damage the tempered glass surface
and void the warranty. For more information, please refer
to the “Manufacturer’s Warranty” on page 182.
䡲
Using Your Phone With a Hearing
Aid Device
A number of Sprint phones have been tested for hearing aid
device compatibility. When some wireless phones are used
with certain hearing devices (including hearing aids and
cochlear implants), users may detect a noise which can
interfere with the effectiveness of the hearing device.
M570.book Page 177 Thursday, June 10, 2010 12:00 PM
Ratings have been developed for mobile phones to assist
hearing device users find phones that may be compatible with
their hearing device. Not all phones have been rated for
compatibility with hearing devices. Phones that have been
rated have a label located on the box. Your SPH-M570 has an
M4 and T3 rating.
These ratings are not guarantees. Results will vary depending
on the user’s hearing device and individual type and degree of
hearing loss. If a hearing device is particularly vulnerable to
interference noise; even a phone with a higher rating may still
cause unacceptable noise levels in the hearing device. Trying
out the phone with your hearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing devices than unrated phones. (M4 is the
better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch”or “Telephone Switch”) than unrated phones. (T4 is the
better/higher of the two ratings. Note that not all hearing
devices have telecoils in them.)
Note: New Technologies, Including Wi-Fi
This phone has been tested and rated for use with hearing
aids for some of the wireless technologies that it uses. However,
there may be newer wireless technologies (including Wi-Fi)
used in this phone that have not been tested for use with
hearing aids.
Hearing aid devices may also be measured for immunity to
interference noise from wireless phones and should have
ratings similar to phones. Ask your hearing healthcare
professional for the rating of your hearing aid. Add the rating of
your hearing aid and your phone to determine probable
usability:
䢇 Any combined rating equal to or greater than six offers
excellent use.
䢇 Any combined rating equal to five is considered normal use.
䢇 Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will
have a combined rating of six for “excellent use.” This is
synonymous for T ratings.
Sprint further suggests you experiment with multiple phones
(even those not labeled M3/T3 or M4/T4) while in the store to
find the one that works best with your hearing aid device.
Should you experience interference or find the quality of
service unsatisfactory after purchasing your phone, promptly
return it to the store within 30 days of purchase. (A restocking
4A. Important Safety Information
Important Safety Information
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference noise they may generate. ANSI standard C63.19
was developed to provide a standardized means of measuring
both wireless phone and hearing devices to determine usability
rating categories for both.
177
M570.book Page 178 Thursday, June 10, 2010 12:00 PM
fee may be applied to exchanges. Visit www.sprint.com/returns
for details.) More information about hearing aid compatibility
may be found at: www.fcc.gov, www.fda.gov, and
www.accesswireless.org.
䢇
Getting the Best Hearing Device
Experience With Your Phone
To further minimize interference:
䢇 Set the phone’s display and keypad backlight settings to
ensure the minimum time interval:
1. Highlight
and press
> Settings > Display >
Backlight Control > Backlight Dim or Backlight Off.
2. Highlight the minimum time interval setting and
press
䢇
䢇
.
Position the phone so the internal antenna is farthest from
your hearing aid.
Move the phone around to find the point with least
interference.
䢇
䢇
䢇
䢇
䢇
䢇
Caring for the Battery
䢇
Protecting Your Battery
䢇
The guidelines listed below help you get the most out of your
battery’s performance.
178
4A. Important Safety Information
Recently there have been some public reports of wireless
phone batteries overheating, catching fire, or exploding. It
appears that many, if not all, of these reports involve
counterfeit or inexpensive, aftermarket-brand batteries with
unknown or questionable manufacturing standards. Sprint is
not aware of similar problems with Sprint phones resulting
from the proper use of batteries and accessories approved
by Sprint or the manufacturer of your phone. Use only Sprintapproved or manufacturer-approved batteries and
accessories found at Sprint Stores or through your phone’s
manufacturer, or call 1-866-866-7509 to order. They’re also
available at www.sprint.com — click Accessories. Buying the
right batteries and accessories is the best way to ensure
they’re genuine and safe.
In order to avoid damage, charge the battery only in
temperatures that range from 32° F to 113° F (0° C to 45° C).
Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for
a long period of time.
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
䡲 Less than one month:
-4° F to 140° F (-20° C to 60° C)
M570.book Page 179 Thursday, June 10, 2010 12:00 PM
More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
For safe disposal options of your Li-Ion batteries, contact your
nearest Sprint authorized service center.
Special Note: Be sure to dispose of your battery properly. In
some areas, the disposal of batteries in household or business
trash may be prohibited.
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When
it’s turned on, it receives and transmits radio frequency (RF)
signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006
watt to 0.2 watt in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP
standards described below.
In 1991–92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI)
joined in updating ANSI’s 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120
scientists, engineers and physicians from universities,
government health agencies and industries developed this
updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and
Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if
you wear a handset on your body, use a Sprint-supplied or
Sprint-approved carrying case, holster or other body-worn
accessory. If you do not use a body-worn accessory, ensure
the antenna is at least 7/16 inch (1.5 centimeters) from your
body when transmitting. Use of non-Sprint-approved
accessories may violate FCC RF exposure guidelines.
For more information about RF exposure, visit the FCC website
at www.fcc.gov.
Specific Absorption Rates (SAR) for Wireless
Phones
The SAR value corresponds to the relative amount of RF
energy absorbed into the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
4A. Important Safety Information
179
Important Safety Information
䡲
M570.book Page 180 Thursday, June 10, 2010 12:00 PM
highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than
the level reported to the FCC. This is because of a variety of
factors including its proximity to a base station antenna, phone
design and other factors. What is important to remember is that
each phone meets strict federal guidelines. Variations in SARs
do not represent a variation in safety.
FCC Notice
All phones must meet the federal standard, which incorporates
a substantial margin of safety. As stated above, variations in
SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard
of 1.6 W/kg are considered safe for use by the public.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
The highest reported SAR values of the SPH-M570 are:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
FCC Radio Frequency Emission
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
This phone meets the FCC Radio Frequency Emission
Guidelines.
However, there is no guarantee that interference will not occur
in a particular installation.
FCC ID number: A3LSPHM570.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
䢇 Reorient the direction of the internal antenna.
Cellular CDMA mode (Part 22):
Head: 0.72 W/kg; Body-worn: 0.98 W/kg
PCS mode (Part 24):
Head: 0.99 W/kg; Body-worn: 0.56 W/kg
More information on the phone’s SAR can be found from the
following FCC website: http://www.fcc.gov/oet/ea/.
180
4A. Important Safety Information
04a_Safety.fm Page 181 Thursday, June 10, 2010 12:00 PM
䢇
䢇
䢇
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Owner’s Record
The model number, regulatory number, and serial number are
located on a nameplate inside the battery compartment.
Record the serial number in the space provided below. This will
be helpful if you need to contact us about your phone in the
future.
Model: SPH-M570 Restore™
Important Safety Information
Serial No.:
User Guide Proprietary Notice
T9 Text Input is licensed by Nuance Communications, Inc. and
is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
6,011,554 and other patents pending.
User Guide template version 9a_FM (April 2009)
4A. Important Safety Information
181
M570.book Page 182 Thursday, June 10, 2010 12:00 PM
Manufacturer’s Warranty
4B. Manufacturer’s Warranty
⽧
Manufacturer’s Warranty (page 182)
Your phone has been designed to provide you with
reliable, worry-free service. If for any reason you have a
problem with your equipment, please refer to the
manufacturer’s warranty in this section.
For information regarding the terms and conditions of
service for your phone, please visit www.sprint.com or
call Sprint Customer Service at 1-888-211-4727.
Note: In addition to the warranty provided by your phone’s
manufacturer, which is detailed on the following pages, Sprint
offers a number of optional plans to cover your equipment for
non-warranty claims. Sprint Total Equipment Protection
provides the combined coverage of the Sprint Equipment
Replacement Program and the Sprint Equipment Service
and Repair Program, both of which are available separately.
Each of these programs may be signed up for within 30 days
of activating your phone. For more details, please visit your
nearest Sprint Store or call Sprint at 1-800-584-3666.
182
Manufacturer’s Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC
("SAMSUNG") warrants to the original purchaser ("Purchaser")
that SAMSUNG's phones and accessories ("Products") are free
from defects in material and workmanship under normal use
and service for the period commencing upon the date of
purchase and continuing for the following specified period of
time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Other Phone Accessories
1 Year
What is Not Covered?
This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover:
(a) defects or damage resulting from accident, misuse,
abnormal use, abnormal conditions, improper storage,
exposure to moisture or dampness, neglect, unusual physical,
electrical or electromechanical stress, or defects in
appearance, cosmetic, decorative or structural items, including
framing, and any non-operative parts unless caused by
SAMSUNG; (b) defects or damage resulting from excessive
force or use of a metallic object when pressing on a touch
screen; (c) equipment that has the serial number or the
enhancement data code removed, defaced, damaged, altered
or made illegible; (d) any plastic surfaces or other externally
exposed parts that are scratched or damaged due to normal
use; (e) malfunctions resulting from the use of Product in
conjunction or connection with accessories, products, or
ancillary/peripheral equipment not furnished or approved by
SAMSUNG; (f) defects or damage from improper testing,
operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (g) defects or damage
from external causes such as collision with an object, or from
fire, flooding, sand, dirt, windstorm, lightning, earthquake, or
from exposure to weather conditions, or battery leakage, theft,
blown fuse, or improper use of any electrical source; (h) defects
or damage caused by cellular signal reception or transmission,
or viruses or other software problems introduced into the
Product; (j) any other acts which are not the fault of SAMSUNG;
or (i) Product used or purchased outside the United States.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the
seals on the battery are broken or show evidence of tampering,
or (iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations?
During the applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must return
Product to an authorized phone service facility in an adequate
container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the
original date of purchase, the serial number of Product and the
sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888987-4357. Upon receipt, SAMSUNG will promptly repair or
replace the defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product
with a rebuilt, reconditioned or new Product. Repaired/replaced
cases, pouches and holsters will be warranted for a period of
ninety (90) days. All other repaired/replaced Product will be
warranted for a period equal to the remainder of the original
Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
Manufacturer’s Warranty
Warranty
M570.book Page 183 Thursday, June 10, 2010 12:00 PM
183
M570.book Page 184 Thursday, June 10, 2010 12:00 PM
What Are The Limits On Samsung's Warranty/liability?
SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
䢇 THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
䢇 WARRANTIES OF TITLE OR NON-INFRINGEMENT;
䢇 DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF
THE PRODUCT;
䢇 THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
䢇 COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.
ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY
ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
184
Manufacturer’s Warranty
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM
THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR
FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY
OTHER PARTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
M570.book Page 185 Thursday, June 10, 2010 12:00 PM
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY
USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED
WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT.
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE
AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND
THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
Samsung Telecommunications America, LLC
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to
make modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
Warranty
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS
OR AS LIMITED AS THE LAW PERMITS.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©
2010 Samsung Telecommunications America, LLC. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval. Specifications and availability subject to
change without notice. [021710]
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License
Agreement ("EULA") is a legal agreement between you (either
an individual or a single entity) and Samsung Electronics Co.,
Ltd. for software owned by Samsung Electronics Co., Ltd. and
its affiliated companies and its third party suppliers and
licensors that accompanies this EULA, which includes
computer software and may include associated media, printed
materials, "online" or electronic documentation ("Software").
BY CLICKING THE "I ACCEPT" BUTTON (OR IF YOU BYPASS
OR OTHERWISE DISABLE THE "I ACCEPT", AND STILL
INSTALL, COPY, DOWNLOAD, ACCESS OR OTHERWISE USE
Manufacturer’s Warranty
185
M570.book Page 186 Thursday, June 10, 2010 12:00 PM
THE SOFTWARE), YOU AGREE TO BE BOUND BY THE
TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS
IN THIS EULA, YOU MUST CLICK THE "DECLINE" BUTTON,
DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following
rights provided that you comply with all terms and conditions of
this EULA: You may install, use, access, display and run one
copy of the Software on the local hard disk(s) or other
permanent storage media of one computer and use the
Software on a single computer or a mobile device at a time,
and you may not make the Software available over a network
where it could be used by multiple computers at the same
time. You may make one copy of the Software in machinereadable form for backup purposes only; provided that the
backup copy must include all copyright or other proprietary
notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung
reserves all rights not expressly granted to you in this EULA.
The Software is protected by copyright and other intellectual
property laws and treaties. Samsung or its suppliers own the
title, copyright and other intellectual property rights in the
Software. The Software is licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted
by applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
186
Manufacturer’s Warranty
based on the Software. You may not rent, lease, lend,
sublicense or provide commercial hosting services with the
Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and
its affiliates may collect and use technical information gathered
as part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not
disclose this information in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements
and add-on components (if any) of the Software that Samsung
may provide to you or make available to you after the date you
obtain your initial copy of the Software, unless we provide other
terms along with such upgrade. To use Software identified as
an upgrade, you must first be licensed for the Software
identified by Samsung as eligible for the upgrade. After
upgrading, you may no longer use the Software that formed the
basis for your upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or
the rights to the Software granted herein to any third party
unless it is in connection with the sale of the mobile device
which the Software accompanied. In such event, the transfer
must include all of the Software (including all component parts,
the media and printed materials, any upgrades, this EULA) and
you may not retain any copies of the Software. The transfer may
not be an indirect transfer, such as a consignment. Prior to the
transfer, the end user receiving the Software must agree to all
the EULA terms.
7. EXPORT RESTRICTIONS. You acknowledge that the
Software is subject to export restrictions of various countries.
You agree to comply with all applicable international and
national laws that apply to the Software, including the U.S.
Export Administration Regulations, as well as end user, end
use, and destination restrictions issued by U.S. and other
governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA,
you shall cease all use of the Software and destroy all copies,
full or partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS"
AND WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY
KIND, AND SAMSUNG AND ITS LICENSORS (COLLECTIVELY
REFERRED TO AS "SAMSUNG" FOR THE PURPOSES OF
SECTIONS 9, 10 and 11) HEREBY DISCLAIM ALL
WARRANTIES AND CONDITIONS WITH RESPECT TO THE
SOFTWARE, EITHER EXPRESS, IMPLIED OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY,
OF SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF
FITNESS FOR A PARTICULAR PURPOSE, OF RELIABILITY OR
AVAILABILITY, OF ACCURACY, OF LACK OF VIRUSES, OF
QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD
PARTY RIGHTS. SAMSUNG DOES NOT WARRANT AGAINST
INTERFERENCE WITH YOUR ENJOYMENT OF THE
SOFTWARE, THAT THE FUNCTIONS CONTAINED IN THE
SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE
OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED
OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE
WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A
WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE,
YOU ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF
IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE
STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
Warranty
M570.book Page 187 Thursday, June 10, 2010 12:00 PM
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND
CERTAIN OTHER DAMAGES. TO THE EXTENT NOT
PROHIBITED BY LAW, IN NO EVENT SHALL SAMSUNG BE
LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL,
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF DATA,
BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO
Manufacturer’s Warranty
187
M570.book Page 188 Thursday, June 10, 2010 12:00 PM
YOUR USE OR INABILITY TO USE THE SOFTWARE, THE
PROVISION OF OR FAILURE TO PROVIDE SUPPORT OR
OTHER SERVICES, INFORMATION, SOFTWARE, AND
RELATED CONTENT THROUGH THE SOFTWARE OR
OTHERWISE ARISING OUT OF THE USE OF THE SOFTWARE,
OR OTHERWISE UNDER OR IN CONNECTION WITH ANY
PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT,
TORT OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
JURISDICTIONS DO NOT ALLOW THE LIMITATION OF
LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT
APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages
that you might incur for any reason whatsoever (including,
without limitation, all damages referenced herein and all direct
or general damages in contract or anything else), the entire
liability of Samsung under any provision of this EULA and your
exclusive remedy hereunder shall be limited to the greater of
the actual damages you incur in reasonable reliance on the
Software up to the amount actually paid by you for the Software
or US$5.00. The foregoing limitations, exclusions and
disclaimers (including Sections 9, 10 and 11) shall apply to the
maximum extent permitted by applicable law, even if any
remedy fails its essential purpose.
188
Manufacturer’s Warranty
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all
other end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for
the International Sale of Goods, the application of which is
expressly excluded. If a dispute, controversy or difference is not
amicably settled, it shall be finally resolved by arbitration in
Seoul, Korea in accordance with the Arbitration Rules of the
Korean Commercial Arbitration Board. The award of arbitration
shall be final and binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the
entire agreement between you and Samsung relating to the
Software and supersedes all prior or contemporaneous oral or
written communications, proposals and representations with
respect to the Software or any other subject matter covered by
this EULA. If any provision of this EULA is held to be void,
invalid, unenforceable or illegal, the other provisions shall
continue in full force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
M570.book Page 189 Thursday, June 10, 2010 12:00 PM
©
2010 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval. Specifications and availability subject to
change without notice.
Warranty
To avoid unintended information leaks and other problems of
this sort, it is recommended that the device be returned to
Samsung’s Customer Care Center for an Extended File System
(EFS) Clear which will eliminate all user memory and return all
settings to default settings. Please contact the Samsung
Customer Care Center for details.
Important: Please provide warranty information (proof of
purchase) to Samsung’s Customer Care Center
in order to provide this service at no charge. If the
warranty has expired on the device, charges may
apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Phone: 1-888-987-HELP (4357)
Important: If you are using a handset other than a standard
numeric dialpad, dial the numbers listed in
brackets.
Manufacturer’s Warranty
189
M570.book Page 190 Thursday, June 10, 2010 12:00 PM
Index
Numerics
2sec Pause 69, 70
3-Way Call 122
A
Abbreviated Dialing 29, 57
Activation 3
Adapter
microSD Card 93
Airplane Mode 54
Alarm Clock 81
Answering Calls 23
Applications 141
Downloading 138
Asian Avenue 146
Automatic Speech Recognition
(ASR) 85
B
Backlight 50
Dimming 50
Java 51
Off Timer 51
Battery 16–19
Capacity 17
Charging 18
Disposal 179
Installing 17
Best of Green 148
Black Planet 146
Bluetooth 109–113
Pairing 110
Sending Files 112
Sending Items 111
Settings 110
Bookmarks
Accessing 134
Creating 134
Deleting 135
Brightness
Changing 51
Browser Menu 131–135
Clear private data 132
Font size 132
Help 132
Icon Row 132
OPTIONS 132
Page info 132
Redirect prompt 132
Reset browser 132
Reset browser settings 132
Send this page to 132
Set as Homepage 132
Startup page 132
Toolbar 131
Buying Ringers and Games
138
Index
M570.book Page 191 Thursday, June 10, 2010 12:00 PM
C
Calculator 83
Eco Calculator 83
Tip Calculator 83
Index
191
M570.book Page 192 Thursday, June 10, 2010 12:00 PM
Calendar 76–80
Adding an Event 76
Adding Events 76
Event Alert Menu 77
Viewing Events 77
Call Forwarding 123
Call Guard 125
Call Waiting 122
Callback Number 54
Caller ID 121
Camera 97–108
see also Pictures
Multiple Shots 100
Options 98
Self Timer 99
Taking Pictures 97
Carousel
Adding a Tile 44
Removing a Tile 45
Replacing Tiles 46
Resetting One Click 47
Clear Envelope 118
192
Index
Contacts 66–75
Adding a Number 69
Adding an Entry 66
Assigning a Picture 72, 98
Assigning Ringers 71
Dialing From 29
Editing 68
Editing a Number 69
Entry Options 68
Finding Entries 72
Saving a Phone Number 67
Secret Entries 73
Sending Via Bluetooth 111
Wireless Backup 74
Launching the Web 128
Password 5
Security Features 59
User Name 127
Delete Stuff 58
Call Logs 58
Contacts 58
Cookies and Cache 58
Downloaded Content 58
Pictures/Videos 58
Text Messages 58
Deleting Phone Content 58
Dialing Options 22
Display Screen 11, 51
Language 52
Downloading Ringers and
Games 138
Driving Directions 164
Dual Language 35
D
Data Restrictions 129
Data Roam Guard 125
Data Services 127–150
see also Web
Enabling and Disabling 59,
130
FAQs 149
E
Eco Calculator 83
M570.book Page 193 Thursday, June 10, 2010 12:00 PM
Numbers 33
Preset Messages 33
Selecting Mode 31
Smileys 33
Symbols 33
Erasing Content 58
Event
Editing 78
Erasing 78
Erasing All 78
Viewing 77
Event Alert Menu 77
G
Games
Buying and Downloading
138
Glee 146
Google 142
Launching via the Carousel
142
Searching 142
GPS Navigation 162
GPS Services 162
H
F
Facebook 147–148
Adding as a Space 147
Overview 147
Uploading Photos 148
Family Locator 164
FCC Notice 180
File Manager 80
Force 61
Index
Email 135
Creating an Additional
Account 137
Getting Started 135
Sending Pictures and Videos
106
Emergency Numbers 24
Emoticons 38
End-of-Call Options 26
Enhanced 911 (E911) 25
Entering Characters
Dual Language 35
Emoticons 40
Letters 39
Numbers 39
Punctuation 39
Smiley’s 40
Symbols 40
Entering Text 31–41
ABC Mode 32
Emoticons 33
Multi-tap Entry 32
Hard Pause 69, 70
History 62–65
Erasing 65
Making a Call 64
Saving a Number 64
I
In-Call Options 25
Internet
see Web
Index
193
M570.book Page 194 Thursday, June 10, 2010 12:00 PM
J
Java Backlight 51
K
Key Beeps 50
Key Functions 9
Key Tone 50
Keyboard
Using 38
L
Language 52
Location Settings 52
Lock Code
Changing 58
Locking Your Phone 57
M
Main Screen Navigation 42–47
Carousel 44
Tiles 44
Tutorial 43
Main Screen Shortcuts 56
Making Calls 22
Memo Pad 82
194
Index
Menu i
Navigation 19
Menu Style 52
GRID VIEW 52
LIST VIEW 52
Messaging 119
Email 135
Notification 53
Preset Messages 53
Signature 53
Voicemail 116
microSD Card 91–96
Adapter 93
Creating Folders 93
File Manager 80
Formatting 94
Write Protection 93
MiGente 146
Missed Calls 24
MMS Text Messaging 119
Multiple Shots 100
Multitasking 158
Music 154–157
Player 156
Playing Music 155
Purchasing and
Downloading 155
Sprint Music Store 154
Streaming Music 160
My Content Manager 140
My Driver 143
My Favorites
Creating from a Recent Place
169
Creating from Current
Location 169
MySpace 146–147
Adding as a Space 146
Overview 146
N
NASCAR
All Star 143
EXIT 144
Fantasy 144
FanZone 144
Miss Sprint 143
News & Alerts 144
Point Standings 143
Race Recap 143
Schedule 144
Settings and Help 144
Speed 143
Stats/Sched 143
Video 143
NASCAR Sprint Cup Mobile
141
Navigating the Main Screen
42–47
Navigating the Menus 19
Navigating the Web 130
Navigation
2D Moving Map 166
3D Moving Map 166
Address 165
Businesses 167
Finding the Cheapest Gas
168
Map Results 168
Summary 166
Traffic Conditions 166
Navigation Preferences 170
Navigation, GPS 162
Net Guard 60
O
Owner’s Record 181
P
Pairing Bluetooth Devices 110
Parental Controls 60–61
Changing the Code 61
Restrictions 61
Pauses 28
Personal Calendar 76
Phone (illus.) 8
Phone Book
see Contacts
Phone Number
Displaying 21
Finding 27
Saving 27, 67
With Pauses 28
Phone Settings 48–61
Airplane Mode 54
Display Settings 50–52
Language 52
Location Settings 52
Messaging Settings 53–54
Sound Settings 48–50
TTY Use 55
Phone Updates 84
Photobucket 146
Photos
Uploading 148
PictBridge 107
Picture
Adding to Text Message 120
Index
Index
M570.book Page 195 Thursday, June 10, 2010 12:00 PM
195
M570.book Page 196 Thursday, June 10, 2010 12:00 PM
Picture Mail
Uploading Pictures to Place
106
Pictures
Assigning as Screen Saver
98
Assigning to Contacts 98
In Phone Folder 103
microSD Folders 103
PictBridge 107
Printing 107
Sending 104
Sending Via Bluetooth 111
Storing 102
Taking Pictures 97
Uploading 106
Playing Music 155
Playlist
Creating 157
Plus (+) Code Dialing 30
PowerSave Mode
Activating 52
196
Index
Predictive Text 32
Prepend 29
Preset Messages 53, 121
PRL 84
Product Tour 172
Incoming Calls 48
Messages 48
Power Down 48
Power Up 48
Voicemail 48
Ringers
Assigning to Contacts 71
Buying and Downloading 48,
138
Setting for Voice Calls 48
Silence All 50
Types 48
Vibrate 49
Roaming 123–126
Call Guard 125
Data Roam Guard 125
Roam Mode 124
R
Recent Location
Sharing 169
Recent Place
Adding to My Favorites 169
Reset 132
Resetting Your Phone 58, 59
Restrictions
Camera/Camcorder 61
Force Location On 61
Text Messaging 61
Voice Calls 61
Web 61
Ringer Types
Alarm 48
Battery Alert 48
Calendar 48
S
Safety Information 174–181
Saving a Phone Number 27, 67
ScanLife 141, 145
Screen Saver 51
Screen Savers
Assigning Pictures 98
Downloading 138
Security 57–61
Configuring Restrictions 61
Data Services 59
Parental Control Code 61
Parental Controls 60
Reset Settings 58
Sending Pictures 104
Sending Videos 104
Set # Type 69, 70
Set as Main # 69, 70
Set as Secret 73
Settings 48–61, 107
Shortcuts 56
Silence All 50
Smiley’s 38
SMS Text Messaging 119
Social Zone 146
Softkeys
Landscape Mode 11
Portrait Mode 9
Software Updates
Downloading 84
Speed Dial 30
Assigning Numbers 70
Sprint Family Locator 164
Sprint Football Live 141
Draft 144
Favorite Team 145
Help/About 145
News 145
Team Pages 145
Tweets 145
Sprint Music Store 154
Sprint Navigation 162
Sprint One Click 42–47
see also Main Screen
Navigation
Sprint Service
Account Passwords 4
Activation 3
Dialing Sprint Services 73
Operator Services 6
Sprint 411 6
Sprint Social Zone 141
Sprint TV 151
Sprint Zone 44
SprintWeb
Home Page 128
Streaming Music 160
Index
M570.book Page 197 Thursday, June 10, 2010 12:00 PM
T
Taking Pictures 97
Text Entry
see Entering Text
Text Messaging
Adding a Preset Message
120
Adding a Smiley 105, 120
Adding a Symbol 105, 120
Adding an Attachment 120
Attaching a Voice Message
120
Index
197
M570.book Page 198 Thursday, June 10, 2010 12:00 PM
Attaching an Image 120
Composing 119
Preset Messages 121
Restrictions 61
Text Mode 38
Text Options
Auto-Captial 34
Auto-Space 34
Dual Language 34
Setting 38
Use My Words 34
Word Choice List 34
Word Completion 34
Word Prediction 34
Text Settings 35
Three-Way Calling 122
Tip Calculator 83
Tone Type
DTMF 50
Lucid 50
Voice 50
TOOLBAR 131
198
Index
TRS 55
TTY Use 55
Turning Your Phone On and
Off 16
TV 151
Twitter
Overview 148
Voice Dialing 86
Voice Memo
Editing 89
Erasing 89
Options 89
Playback 89
Recording 88
Recording Phone
Conversation 88
Voice Memos 88
Voicemail
Clear Icon 118
Notification 116
Retrieving 117
Setting Up 4, 116
Volume 49
U
Unlocking Your Phone 57
Updating the PRL 84
Updating Your Phone 84
V
Vibrate 49
Video
Sending 104
Videos
Options 102
Recording 101
Storing 102
Voice
Adding to Text Message 120
W
Warranty 182
Web 127–150
see also Data Services
Browser Menu 131–135
Downloading Content 138
M570.book Page 199 Thursday, June 10, 2010 12:00 PM
Index
Email 135
Launching 128
Navigating 130
Navigating To 134
User Name 127
Wireless Backup 74
World Clock 84
World Time 84
Write Protection 93
X
Xanga 146
Index
199