Boss BV9560B Specifications

Downloaded from Caradio-Manual.com Manuals

CONTENTS

Welcome

Warning

Note

Features

Basic Operation

Panel Arrangement

Basic Functions

Main Menu Touch Operation

OSD Setup

Adjust Mode

Remote Control Function

Loading

Disc Play Touch Operation

DVD Mode

RDS User Operation

Radio Operation

DVD Basic Operation

VCD Basic Operation

CD/MP3 Basic Operation

Music Surroundings Setting

EQ Setting

Audio Frequency/Tone

BLUETOOTH Touch Operation

BLUETOOTH Operation & Setting-Up

Other Play Mode

Trouble Shooting

Wiring Diagram

Specifications

Accessory

Bluetooth-Enabled

In-Dash Motorized Double-DIN

DVD/MP3/CD AM/FM Receiver

With 7" Widescreen

Touch Screen TFT Monitor

41

42

43

44

45

46

35

37

38

39

40

19

21

22

32

12

13

15

16

17

10

11

7

8

4

5

3

3

6


INSTRUCTIONS

ACCESSORY

Accessory

User Manual

Wire

USB Cable

Keys

Install metal bar

Remote controller

Warranty card

Quantity

1PC

1PC

1PC

2PCS

1PC

1PC

1PC

INSTRUCTIONS

WELCOME

Thank you for choosing Boss Audio for your A/V product.

To properly use this product, please go through this instruction manual for installation and operation, put it in a safe place for future use!

WARNING

1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should

wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you

place it inside the unit, it will cause the unit to go into an error and will not play the

disc. Please ask professional to clean the laser.

2. Playing the radio at higher volumes for a long period of time may cause hearing

issues. You should play this unit at a moderate listen level.

3. This unit is set up by precision parts. If you open up this unit, you will void any and

all of your warranty.

4. Please do not touch LCD display with any hard object so that you prevent it from

getting scratched or damaged.

5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle

lock out wire so that you will not be allowed to watch a video while driving down the

road.

6. This unit is meant for a 12V power and negative ground system from a vehicle.

NOTE:

We keep improving this product all the time. There may be some changes in it that are not in this manual.


INSTRUCTIONS

NOTE

● This unit can play the following disc

ICON MODE

DVD

CONTENT

Sound, image

DISC SIZE

12cm

VCD Sound, image 12cm

MP3 Sound only 12cm

CD Sound only 12cm

Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,

DVD, CD-R, CD-RW, MP3, WMA, JPEG.

2. When playing a DVD, VCD, MP3, CD disc the display will auto

identify the disc and show corresponding word. When appears

on the display, that means that there is no function, please choose

another mode.

SPECIFICATIONS:

Power supply

Power range

Max operate current

Dimensions

Ground system

Amp Rating

FM tuner

European frequency range

USA frequency range

Signal/Noisse ratio

Stereo separation

Search station volt

Distortion rate

AM tuner

European frequency range

USA frequency range

Limit noise sensitivity

DVD PLAYER

Signal/Noise ratio

Frequency response

INSTRUCTIONS

DC 12V

10.8-16.0V DC

10A

178X153X101MM

Negative ground

85 Watts x 4 Channels

87.5-108MHz

87.5-107.9MHz

55dB

30dB

20-30dBuv

1.5

%

522-1620KHz

530-1710KHz

32dB

70dB

20Hz-20KHz


INSTRUCTIONS

WIRING DIAGRAM

This player is equipped with ISO standard connector, please follow below instruction:

●

●

Red - ACC ON (+12V)

Yellow – 12 V Constant

● Black – Ground wire

● Blue - Power Antenna / Remote Amp Turn On

● Orange – Back-Up Camera Trigger (+)

● Grey/Grey black - Right front speaker (+/-)

● White/White black - Left front speaker (+-)

● Purple/Purple black - Right rear speaker (+/-)

● Green/Green - Left rear speaker (+/-)

● Pink – Parking Brake (-)

Note:

The “PARKING BRAKE” wire must be connected to the parking brake system of your car. When the parking brake is engages, the LCD will be allowed to view your video. If not, the screen will produce an image saying, “PARKING BRAKE”.

This is a safety feature designed for the driver not to watch a video while driving.

The video output on this unit will not be affected by this.

INSTRUCTIONS

FEATURES

DVD PLAYER

1. MPEG-4 Decoder Technology

2. Compatible with MP4 (AVI/5.X), DVD (DVD-R/DVD-RW), VCD,

SVCD, CD-RW, WMA, MP3, JPG

3. Supporting Multiple Subtitles, Angles, Languages

4. Child lock function

5. 4-Channel Audio Output

6. Pause, Play, Up/Down, Stop, Zoom, PBC Function

RADIO

1. AM/FM Radio Tuner

2. 30 Radio Preset Stations (18FM, 12AM)

BULETOOTH FUNCTION

1. Bluetooth wireless transfers

2. Displaying bluetooth paring and connection status, call status,

and caller's ID

3. Fast performance, fast connection, accurate and sensible search of

devices in range

4. Support A2DP, AVRCP, HS/HF for handing calls and playing music

LCD DISPLAY

1. 7” - 16:9 TFT LCD Display

2. Touchscreen


INSTRUCTIONS

BASIC OPERATION

1. SOURCE ON/OFF

Press SRC button on panel or SOURCE button on remote control quickly to power on.

Press SRC button on panel or SOURCE button on remote control longer to power off.

2. PLAYING SOURCE CHOOSE

Press SOURCE button on remote control, unit will switch sources in the following sequence: RADIO → DVD → AUX

3. MUTE CONTROL

Press MUTE button on panel or MUTE button on remote control shortly to turn off sound output, press again to back to sound output.

4. VOLUME ADJUSTMENT

1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch

button on display to adjust volume level.

2) The volume setting on this unit is 0 - 39.

BASS, TREBLE, BALANCE & FADER ADJUSTING (SELECT)

Press SEL button on remote control to choose your desired Bass, Treble, Balance &

Fader level:

VOL BAS TRE L/R

F/R

NOTE:

1) DVD playing mode, MBP & User will be automatically activated.

2) After 5 seconds you choose desired mode, do not adjust volume button. The mode will

automatically take you back to status before adjustment.

5. RESET

1) If unit is not working correctly, you should press the RES button. This will reset the

radio and should start working correctly afterwards.

2) After reset, all settings will resume back to the factory default settings.

INSTRUCTIONS

TROUBLE SHOOTING

PROBLEM CAUSE

Check whether power fuse blew or not

SOLUTION

Change fuse same as the old one

Can not power on

Some factor cause MPU wrong operation

Press RESET button on the panel by pen point, then, power on

After ignition switch off, setting information all lose

Remote control no function

Wrong connection between ignition line ACC and

Constant 12 Volt wire

No enough power supply from battery

Poor performance of radio station

Improper length of antenna, poor connection of antenna grounding

Can not load disc

The disc will not go in all the way

Disc is scratched

Change the wiring around

Change battery in remote control

Check whether antenna is connected or not, or poor connection

Remove the 2 screws on top of the radio

Can not play disc

Change new disc

Slot in the disc with sign side up

Can not switch language/subtitle

No image

Put wrong side of disc into unit

Lens has dirty

There is only one language/ subtitle in disc

Video line between unit and

TV is not properly connected

Clean lens by lens clean disc

If disc is not with multi-language/subtitle, it cannot switch language/subtitle

Reconnect lines


INSTRUCTIONS

OTHER PLAY MODE

AUX IN:

AUX IN OPERATION

1) Press “Source” button on remote control or touch “AUX” on the touch screen, to

switch to AUX mode.

2) This will allow you to listen and or watch any source that you have plugged into this

section of the radio.

3) This unit has 1 - Video RCA input & 1 pair of Audio RCA’s for this feature.

CCD (Back-Up Camera)

1) If there is a back-up camera installed onto your car, you will need to connect it to

the CCD video input.

2) When you are backing up the car there you will see this image on your screen.

3) You can set CCD image according to your car's own position in general setting mode.

PANEL ARRANGEMENT

1. SOURCE Button

2. MENU Button

3. VOL - Button

4. VOL + Button

5. MUTE Button

6. OPEN Button

7. RESET Button

8. USB Slot

9. AUX IN

10. Remote Control Receiver

11. MIC input

INSTRUCTIONS


INSTRUCTIONS

BASIC FUNCTION

1. SRC Button

Short press this button to power on . Long press this button to power off .

2. MENU Button

Press this button to back to the main menu.

3. VOL - Button

Press this button to reduce the volume.

4. VOL + Button

Press this button to increase the volume.

5. MUTE / TFT on/off Button

Press this button to shut off the sound output, re-press this button can resume the sound output, long press this button can turn off the TFT LCD display.

6. OPEN Button

Press this button can eject the disc.

7. RESET Button

Press this button and this unit will be restored to the initial state.

8. USB Slot

Connect the USB memory to this socket, and the unit can play music format files supported by this unit in the USB memory.

9. AUX IN

External connected audio input.

10. Remote control receiver

It is able of receiving infrared signals launched by the remote control matching the nuit.

11. MIC input

Bluetooth MIC input.

INSTRUCTIONS

Contact book mode switching

You can touch this button under the Bluetooth mode to select the next mode.

Touch this function key to search the dialed numbers. Each time this key is touched, the cursor will move to the next dialed number.

Touch this function key to search the received numbers. Each time this key is touched, the cursor will move to the next received number.

Touch this function key to search the missed numbers. Each time this key is touched, the cursor will move to the next missed number.

Operations and Settings for the Bluetooth Function

1. Features of the Bluetooth function

1) You can use the function buttons on the unit to receive a call or dial a phone number.

2) You can directly use the hand-free microphone to talk on the phone.

3) You can use the build-in volume control switch to adjust the volume at will.

4) You can switch between the Bluetooth hand-free mode and the cell phone mode.

5) You can use your voice to dial a new number (valid only for cell phones with voice

dialing function).

6) With the Bluetooth function, you can use the Bluetooth microphone in the car to talk

with your folks and friends without having to hold your cell phone, so that your hands

are dedicated for driving, which is safer and law-observing. In the mean time, magnetic

radiation from the cell phone is avoided.

2. Bluetooth match conditions

You can shortly touch the Bluetooth function key under the main menu to directly access the Blueetooth interface.

With a cell phone that supports the function of Blueetooth wireless connection, you can establish a connection between your cell phone and the automobile-loaded unit under the

Bluetooth mode to achieve date exchange and synchronization.

3. Matching and connections between the cell phone and the Bluetooth of the unit

Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments.

After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the

Bluetooth password. Press the unit matching setup button , and enter the Bluetooth password (0000) and confirm it, and then the cell phone will ask you whether you authorize the connection with this equipment or not. Please select “YES”, and the cell phone will be automatically connected with the said Bluetooth equipment within 30 seconds. “OK LINK” will be displayed on the Bluetooth interface to show that a connection between the cell

phone and the Bluetooth device has been successfully established. Under and mode

(radio, TV, DVD, etc.), if there is an incoming call to your cell phone which has been stably connected to the Bluetooth device of the unit, the unit will switch from other mode to the

Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be automatically restored after hang-up.


INSTRUCTIONS

1. Bluetooth hand-free/cell phone

switching

2. Matching function during

Bluetooth connection

3. Voice dialing function

4. Contact book mode switching

5. Return to the main screen

6. Hand-free key

7. Phone number display

8. Hang-up key

9. Delete key

10. Number keys

Functions and Descriptions

Bluetooth hand-free/cell phone switching

If you touch this switching button at the upper-left corner of the screen under the

Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be switched to the cell-phone mode.

Voice dialing function

If you touch the “Voice dial” button at the lower-left corner of the screen under the

Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone, and you can go ahead with the voice dialing function according to the cell-phone instructions. Eg, if you wish to call someone, you can pronounce his/her name stored in the cell phone, then ,the name of the person to be called will be played by the speaker, and the telephone number of this person will be displayed on the screen and automatically dialed.

To cancel voice dialing

If you wish to disable the voice dialing function in the voice dialing mode, you can press the “Voice dialing” key again, and this function will be disabled after you hearing the keying tone.

Hand-free button: After a phone number is keyed in, press this button to call the user of this phone number. When there is an incoming call. Press this button to connect this call.

Hang-up button: When there is an incoming call, press this button to hang up or refuse to connect it.

Delete button: When a wrong digit is keyed in, press this button to delete the wrong digit.

Number keys: You can use these number keys to enter a phone number.

Phone number display: The phone number that you have just entered is displayed here.

40


BASE

12. SD Slot

13. Disc Slot

14. Slot indicator light

INSTRUCTIONS

INSTRUCTIONS

MAIN MENU TOUCH OPERATION (PIC 1)

RADIO

OSD SET

DVD USB/SD

GPS

AUDIO FREQUENCY

INSTRUCTIONS

This function shows that the effect of standard audio output.

TONE

TV

AUX INPUT

* / /


POWER

BLUETOOTH

CDC

Note: You can change the timbre of the sound in DVD mode. We suggest keep it in the original place.

INSTRUCTIONS

EQ SETTING

User defined

Classic

Standard

Rock

Jazz

Pop

OSD SETUP (PIC 2)

Minute

Hour

INSTRUCTIONS

Exit

Radio frequency setting

Back-up Camera left/right selection

RDS on/off optional

Note: Touch corresponding function, it will display in yellow words reminding, and blue back ground reminding.

Time setting

Note: There are 3 buttons automatically changed according to your setting change in radio state when you activate or exit RDS; Changes are as following:

PTY LOUD; TA EQ; AF ST

TIME DISPLAY AND ADJUST

Time display: Touch main menu into adjust mode, press time setup button, the corresponding function will be display in yellow words.

(1)Press “+” on hour to add hour, press “-” to reduce hour;

(2)Press “+” on minute to add minute, press “-” to reduce minute.

NOTE: Touch the correspondence function, will be display in green background.

The unit include two times system: Europe time (24 hour setup), America time (12 hour setup), when show the AM mark it indicate morning time, when appear the PM mark, it show the time of afternoon.

Remark: This unit is with RDS function, it will automatically adjust the time when you activate RDS function or have received RDS radio channels. At no received RDS radio channels or AM state, you should adjust the time.


INSTRUCTIONS

ADJUST MODE (PIC 3)

Sharp: press / button to adjust sharp sound high and low

Volume: press / button to adjust volume

Bass: press / button to adjust bass level

Back main menu

Adjust front and rear speaker

MUSIC SURROUNDINGS SETTING (PIC 7)

INSTRUCTIONS

Adjust left and right speaker

EQ mode

From Rock POP

Off Classic

Exit setup

Resume standard video

Choose the best listening place; this function will make you enjoy the best comfortable sound effects

Loud: press once off LOUD on, press again to turn off

DBAS on/off: press once to DBAS on, press again to DBAS off

Passive

Church

Concert

Wide

Live

Note: This function only is used with the remote control in CD/MP3/USB/SD mode.

Once you have one of these settings on. You will no longer have Bass & Treble adjustments until this feature is set to off.


INSTRUCTIONS

10. CD Program Play

In CD mode, you can set the sequence of playing by the program function, the operation is as follows:

When CD is playing, press ST/PROG button, then the display shows:

PROG

TC

1 _ _ : _ _

2 _ _ : _ _

3 _ _ : _ _

4 _ _ : _ _

TC

5 _ _ : _ _

6 _ _ : _ _

7 _ _ : _ _

8 _ _ : _ _

PLAY

TC

9 _ _ : _ _

10 _ _ : _ _

11 _ _ : _ _

12 _ _ : _ _

DELETE

TC

13 _ _ : _ _

14 _ _ : _ _

15 _ _ : _ _

16 _ _ : _ _

Input the number of the song you want to program by the remote control, program the first song, input your desired song, for example, the sixth song, and press number button

6 on the remote control. Program the second song, press button move the cursor to

2 . Input your desired song, for example, the ninth song, press number button 9 on the remote control. Press button to program play.

Back to the normal mode, press the ST/PROG button, then press button.

Note: This function can only be worked by the remote control.

11. MP3 Program Play

In MP3 mode, you can set the sequence of playing by the program function, the operation is as follows:

When MP3 is playing, press ST/PROG button, then the display shows:

PROG

TC

1 _ _ : _ _

2 _ _ : _ _

3 _ _ : _ _

4 _ _ : _ _

TC

5 _ _ : _ _

6 _ _ : _ _

7 _ _ : _ _

8 _ _ : _ _

PLAY

TC

9 _ _ : _ _

10 _ _ : _ _

11 _ _ : _ _

12 _ _ : _ _

DELETE

TC

13 _ _ : _ _

14 _ _ : _ _

15 _ _ : _ _

16 _ _ : _ _

Then, input desired song by remote control.

For example: Program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example the third song. Program the second song, press button, work with button, move the cursor to 2 . Input 01, press button move the cursor to the second lattice, input desired song, for example, the sixth song

(press 6). Press button to program play.

Back to the normal mode, press the ST/PROG button and then press button.


INSTRUCTIONS

REMOTE CONTROL FUNCTION

4. SOURCE Button

Press this button to choose audio sources.

5. EQ Button

Press this button to choose POP, ROCK, EQ off.

6. SEEK + ( ) / SEEK - ( ) Button

Press this button to manual turning, speed or quick back, previous song and next song.

7. VOL + ( ) / VOL - ( )

Press this button to increase or decrease volume level.

8. SEL Button

Press this button to choose sound feature.

9. LOUD Button

Press this button to startup LOUD function.

10. BAND - P/N Button

In radio mode, press this button to choose band.

In VCD, DVD mode, press this button to choose

AUTO, PAL or NTSC system.

11. LOC/RDM Button

In radio mode, press this button to switch between local and direction. In VCD, CD mode, press this key to randomly play.

12. STOP Button

Press this button to stop playing.

1. POWER

Press once to switch on, press again to switch off.

13. PLAY/PAUSE Button

Press this button to switch between play and pause. In stop mode, press this button to play.

2. MUTE Button

Press once to turn off audio output, press again to resume volume level.

3. DSP

Press this button to show the time.

14. ST/ PROG Button

In radio mode, press this button to choose stereo or mono station. In audio mode, it can help STOP button to programmed play.


INSTRUCTIONS

15. 0 - 10 + Button

Press this button to choose desired song, section, preset stations.

* Decimal numbers, for example the 19th song, press 1,9 button;

* Centesimal numbers, for example, the

120th song, press 1,2,0 button.

24. ANGLE Button

In DVD mode, press this button to change play angle.

25. SETUP Button

In audio mode, press this button to choose different set items.

16. AMS / RPT Button

In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly.

26. OSD Display

Press this button to display the title chapter and the left time.

17. TITLE Button

In DVD mode, press this button to play back to the top menu of disc.

27. ZOOM Button

In DVD/VCD mode, press this button to

ZOOM in. In CD/MP3/USB/SD mode, press this button to choose EQ.

18. AUDIO Button

In DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track, right track, and stereo.

19. SET Playing Time

In DVD mode, press this button, you can define playing time.

28. MENU Button

Press button to back to the main menu.

BATTERY CHANGE

When control distance of remote control becomes shorter or no function, please change battery. Please confirm polarity before change.

One hand press stopper, then pull out battery.

20. SUBTITLE Button

In DVD mode, press this button to switch language of subtitle.

21. PBC Button

In VCD mode, press this button to display all song menus, work with number button to choose songs.

Put battery into controller.

22. UP, DOWN, LEFT, RIGHT, ENTER

Button

In DVD mode, press this button to move cursor up, down, left, right to choose item in menu. Press the enter button to confirm choice.

Insert battery holder into controller.

23. SLOW Button

In audio mode, press this button to slow backward and slow forward.


INSTRUCTIONS

CD/MP3 BASIC OPERATION (Look at Picture #4)

Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu can to play.

1. Repeat Play

In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat

CD disc: Single song repeat→ Repeat play off.

MP3 disc: Single song repeat→ Directory repeat → Repeat play off.

2. Fast Forward/Fast Rewind

Press SEEK + / SEEK - button on remote control, or / touch button on display to speed forward or backward playing.

Note: Hold above button a bit longer to operate.

3. Previous/Next Song Play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.

4. Pause Play

In play mode, press button on remote control, or button on display to pause.

Press again to go back to normal play.

5. Stop Play

In play mode:

1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

6. OSD

In playing mode, short press OSD on remote control to show all information of present

7. Randomly Play

In CD mode, press LOC/RDM button on remote control, to instantly play each song.

Press again to back to the normal play.

8. EQ Mode

1) This function can only be worked by remote control.

2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can choose the sound mode.

3) When enter this function, press the button / / / to move the course to select sound mode which in the system menu, after your selection position will show red color to indicate the confirmation.

9. OPEN

Press OPEN button on panel to eject disc.

INSTRUCTIONS

15. PBC (MENU) Play

In VCD mode, press this button then play the PBC and display will show whole menu in disc, work with number button to choose song. When you are playing either song of the PBC, and you want to stop to select another song, press the button to turn off.

Note:

1) This function can be worked by the control.

2) PBC is suitable for the SVCD and VCD 2.0 disc.

3) In PBC mode, you can not press number button only to choose song.

16. VCD Program Playing

In VCD mode, you can set playing sequence of songs by program play function.

The program playing operation steps are as follows:

In VCD mode, press ST/PTOG button, display will show:

PROG

TC

1 _ _ : _ _

2 _ _ : _ _

3 _ _ : _ _

4 _ _ : _ _

TC

5 _ _ : _ _

6 _ _ : _ _

7 _ _ : _ _

8 _ _ : _ _

PLAY

TC

9 _ _ : _ _

10 _ _ : _ _

11 _ _ : _ _

12 _ _ : _ _

DELETE

TC

13 _ _ : _ _

14 _ _ : _ _

15 _ _ : _ _

16 _ _ : _ _

Input the songs which you want to programmed by the number buttons on remote control.

Fr example: Program the first song, input your desires song, for example, the fourth song, and press number button 4 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the eighth song, press number button 8 on the remote control. Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.


LOADING

INSTRUCTIONS

This white bar shows the rate of process of loading a disc.

Note: When loading a disc, touch screen function can not be used.


INSTRUCTIONS

DISC PLAY TOUCH OPERATION (PIC 4)

Touch this area to enter & exit main menu.

MP3 mode, press this button so you can move the cursor to left/right/up/down and select the songs which in the system menu

DVD mode, press this area to show function icons

Touch option:

next song;

previous songs;

adjust monitor angles;

Pls refer to Pic 5 when touch “SET” button;

There is a yellow remind when touch any button.

You can select “X →X →X →X 16 →X 20 → Play ” to speed up when you press this button .

You can select “X →X →X →X 16 →X 20 → Play ” to backward when you press this button .

INSTRUCTIONS

8. OSD

In playing mode, short press OSD on remote control to show all information of present disc.

9. Number Buttons

In VCD mode, press 0-9 number button to input song. For example, you want to choose

13th song, press 10+ button, and then press 3 button once to play 13th song.


10. Repeat Play

In playing mode, press AMS/RPT button on remote control, to startup following, repeat function. Single song repeat→ Repeat play off.

Note:

1) When playing VCD disc, if PBC is on, no repeat function.

2) After unit is power off or mode is switched to other playing mode except VCD mode.

if you switch back to VCD mode, repeat playing will be cancelled.

11. Randomly Play

In VCD mode, press LOC/RDM button on remote control, to instantly play each song.

Press again to back to the normal play.

Note: When VCD disc, if PBC is on, RDM will not work.

12. Scan Play

In playing mode, it will play each song for 15 seconds to scan for your desired song.

1) Press 3/INT touch button on display to scan and play from the first song.

2) When you hear your desired song, press this button to cancel scan playing.

It will go back to normal playing.

13. Switch Track

In VCD mode, press AUDIO button on remote control to switch track as following sequence:

Left Right Stereo

14. OPEN

Press OPEN button on panel to eject disc.


INSTRUCTIONS

VCD BASIC OPERATION (Look at picture #4)

Slide in the VCD disc, it will play it automatically. If the disc is in slot, press DVD touch button on main menu can to play.

1. Pause Play

In playing mode, press button on remote control, or on display to pause.

Press again to back to normal play.

2. Stop Play

In playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.


3. Fast Forward/Rewind Function

In playing mode, press SEEK + button on remote control, or touch button on display to speed play.

When you need quick back, press SEEK - button on remote control, or touch button on display to quick back play.




5. Switch System

In playing mode, short press the BAND/P/N button on remote control, to select PAL,

AUTO, NTSC TV system.


6. Slow Play

Press SLOW button on remote control to slow play. The level of slow playing is as follows.

Sequence is :

SLOW 1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5

PLAY SLOW 1/7 SLOW 1/6


7. Zoom In / Zoom Out

Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as follows:

ZOOM IN 2 ZOOM IN 3 ZOOM IN 4 ZOOM IN 1/2

Note: ZOOM IN OFF ZOOM IN 1/4 ZOOM IN 1/3

1. This function can only be worked by the remote control.

2. Image which is zoomed in can be moved by up/down/left/right cursor to move.

3. Image which is zoomed out cannot be moved.


DVD MODE (PIC 5)

AUDIO SETTING ON TOUCH SCREEN

INSTRUCTIONS

Audio selection:

VOL → BAS → TRE → BAL → FAD

When using this function, the position bar will be highlighted.

EQ mode: Touch the button to change settings:

ROCK → POP → CLASSIC → OFF

Change the listening position

Loud choosing: this function is defined open, when it is touched at the first time, the loud function will be closed, at the same time, yellow light disappear.

Bass choosing: when touched the button will be yellow, touch this button to exit, touch it again to resume.

INSTRUCTIONS

VIDEO SETTING ON TOUCH SCREEN

You can choose: Brightness, Contrast, Color,

Hue, adjust the image effect according to your sight. The blue bar will show your level.

Video mode: When using this function, the position will be darker on the screen.

Image mode: You can choose the area in the broken line on the panel, standard, defined, soft, according what you need to choose, the blue back light will disappear.

DIGITAL SETUP

1. Press or button

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

INSTRUCTIONS

2. Press / / / button, then to enter.

OP MODE

DYNAMIC RANGE

DUAL MONO

DIGITAL SETUP

LINE OUT

RF REMOD

EXIT SETUP

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO

FULL

6/8

4/8

2/8

OFF

EXIT SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO

DIGITAL SETUP

STEREO

MONO L

MONO R

MIX MONO

EXIT SETUP


INSTRUCTIONS

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

12

10

8

6

4

2

0

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

8

6

4

2

0

EXIT SETUP

INSTRUCTIONS

RDS USER OPERATION (PIC 6)

Press PTY, when PTY is on, it means there is strong RDS signals output.

Press this button to choose radio channels' name, please refer to details user manual.

Press this button to close sound output, re-press this button to resume sound.

Short press on this button to decrease radio frequency; longer press on this button to seek radio channels frequency decreased direction.

Short press on this button to increase radio frequency; longer press on this button to seek radio channels frequency increased direction.

Touch this area to enter & exit main menu.

Press this button to adjust angles of the monitor.

Press “SEL” to adjust other functions, please refer to pic 3.

Press this button each time, it will automatically execute the following operation in an order of FM1 → FM2 → FM3 →

AM1 → AM2

Press TA, when TA is on, it means the unit is automatically track RDS radio channels.

In the radio state, press “APS” button, it will automatically seek radio channels in the whole band and preset the strongest radio channels.

For details of RDS operation, please refer to other instruction


INSTRUCTIONS

RDS

1. EON (RDS Mark)

Indicate main unit is on auto tracking RDS mode.

2. AF (RDS Auto Tracking Mark)

Indicate radio is auto tracking RDS channel.

3. TA (RDS Signal Increasing Output)

Indicate RDS channel have signal increasing output.

4. TP (RDS Channel Stereo Mark)

Indicate RDS channel is on stereo playing mode.

5. POP.M (RDS Channel Mark)

Indicate RDS channel name.

1. RDS Tracking System

Press AF button in FM mode, and then press / last 2 minutes, RDS will auto search channel up and down, it will stop searching when RDS channel be founded, but “AF” will keep remaining on the screen and waits for the next traffic emergency report.

2. RDS Tracking on Playing Mode

In playing mode, “AF” tracking system keeps on opening and waits for traffic emergency report.

1) PTY: RDS button, press once will show music mode POP, press 1-6 function memory button, every group have 2 channel.

POP M ROCK M EASY M

LIGHT M

JAZZ

CLASSICS M

COUNTRY

OTHER M

NATION

2) Press PTY button twice and then press 1-6 function memory button, every button have 3 channel.

NEWS AFFAIRS INFORMATION

EDUCATION DRAMA CULTURE

CHILDREN SOCIETT RELIGION

TRAVEL

SPORT

SCIENCE

PHONING

Note: RDS channel in broken line is available.

AF: RDS auto search button, in radio mode also can press this button shortly auto tracking RDS channel, press this button shortly can cancel RDS function.

TA: In RDS mode, press this button can output TA signal, and check RDS channel is exist or not, if no RDS signal TFT will show “NO.TA.TP”.

VIDEO SETUP

1. Press or button

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

EXIT SETUP


INSTRUCTIONS


BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

12

10

8

6

4

2

0

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

12

10

8

6

4

2

0

EXIT SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

VIDEO SETUP

+ 6

+ 4

+ 2

0

- 2

- 4

- 6

EXIT SETUP

INSTRUCTIONS

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

AUDIO SETUP

1. Press or button

AUDIO OUT

KEY

AUDIO SETUP

EXIT SETUP

AUDIO OUT

KEY

AUDIO SETUP

EXIT SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

LANGUAGE SETUP

ENGLISH

GERMAN

SPANISH

FRENCH

PORTUGUESE

EXIT SETUP


AUDIO OUT

KEY

AUDIO SETUP

SPDIF/OFF

SPDIF/RAW

SPDIF/PCM

EXIT SETUP

AUDIO OUT

KEY

AUDIO SETUP

#

+4

+2

0

-2

-4

EXIT SETUP

INSTRUCTIONS

RADIO OPERATION (Please look at picture #6)

1. Band Selection

In radio mode, press BAND button, BAND/P/N button on remote control, or touch position on screen every time to choose band, the sequence is as follows:

FM1 FM2 FM3

AM2 AM1

2. Adjust Frequency

Manually Adjust Frequency:

Press SEEK + button on remote control, or touch button on display shortly every time, frequency will increase one step by one step till you get desired frequency. Press SEEK button on remote control, or touch button on display shortly every time, frequency will ecrease on step by step till you get desired frequency.

Search Station: shortly every time to search station in up/down direction. When get one station, it will auto stop searching.

3. Browse / Auto Search and Store Station

1) In radio mode, press AMS/RPT button on remote control, or APS button on display shortly to browse preset station on 1-6;

2) In radio mode, press AMS/RPT button on remote control, or APS button on display longer to auto search in whole band from present frequency and store 6 most strong frequency on 1-6;

3) This unit has FM1, FM2, FM3, AM1, AM2 Bands. Each band can store 6 stations, so a total 30 preset stations.

Note: After preset station, unit will cancel the former preset stations.

4. Mono/Stereo Selection

In radio mode, press ST/PTOG button on remote control or ST touch position on display to choose mono/stereo program.

Note: In radio mode, start up the stereo function automatic, touch the ST button again on

the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the stereo. When the right under foot appear the MONO mark, it show the MONO on.

5. Manual Preset and Store Station

In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to store preset frequency into preset channel. For example, the present frequency is

89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.


INSTRUCTIONS

DVD BASIC OPERATION (Please link with touch operation at pic 4)

Slide in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu to play disc.

1. Pause Play

In playing mode, press button on remote control, or on the display to pause.

Press again to go back to normal play.

2. Stop Play

In playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.


3. Fast Forward/Fast Backward Play

In playing mode, press SEEK + button on remote control, or touch button on display to speed play.

When you need quick back, press SEEK - button on remote control, or touch button on display to quick back play.




5. Switch System

In playing mode, short press the BAND/P/N button on remote control, to select PAL,

AUTO, NTSC TV system.


6. Slow Play

Press SLOW button on remote control to slow play. The level of slow playing is as follows.

Sequence is :

SLOW 1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5

PLAY SLOW 1/7 SLOW 1/6


7. Zoom In/Zoom Out

Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as follows:

ZOOM IN 2 ZOOM IN 3 ZOOM IN 4 ZOOM IN 1/2

Note: ZOOM IN OFF ZOOM IN 1/4 ZOOM IN 1/3

1. This function can only be worked by the remote control.

2. Image which is zoomed in can be moved by up/down/left/right cursor to move.

3. Image which is zoomed out cannot be moved.


LANGUAGE SETUP

1. Press or button

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

INSTRUCTIONS


OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

LANGUAGE SETUP

ENGLISH

GERMAN

SPANISH

FRENCH

PORTUGUESE

EXIT SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

LANGUAGE SETUP

ENGLISH

GERMAN

SPANISH

FRENCH

PORTUGUESE

EXIT SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

LANGUAGE SETUP

ENGLISH

GERMAN

SPANISH

FRENCH

PORTUGUESE

EXIT SETUP

INSTRUCTIONS

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

EXIT SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

EXIT SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

EXIT SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

EXIT SETUP

Note:

1. After input code “0000” press ENTER button to

turn on child lock;

2. Move cursor to level item, choose desired level;

3. Only child lock is in can you choose.

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

1. KID SAFE

2. G

3. PG

4. PG 13

5. PG-R

6. R

7. NC-17

8. ADULT

EXIT SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

RESTORE

EXIT SETUP

INSTRUCTIONS

8. OSD

In playing mode, short press OSD on remote control to show all information of present disc.

9. Repeatedly Play

In play mode, press AMS/RPT button on remote control to start up follow repeat function.

Repeat ( chapter) Repeat (section) Repeat (off)

10. Angle Switch

If the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch the angle during playing.

The sequence is as follow:

ANGLE 1 → ANGLE 2 → ANGLE 3

Note:

1. It just can be worked by the remote control.

2. It is only for the DVD disc which has multi-angle.

3. If there is a sign on the cover of the DVD disc. The number in the sign means how many angles the disc has.

4. You can not switch the angle when slow playing.

11.Multi-Audio

There are different languages of dialogue and audio systems in DVD disc.

If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and the audio systems when playing.

Press the AUDIO button repeatedly to change the language of dialogue.

Note


2. It is only for the DVD disc which has multi-language.

3. If there is a sign on the cover of the DVD disc, means that it was recorded by multi-language/audio system.

4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.

12.Multi-Subtitle

If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.

Press the sub-t button repeatedly to change the language.

Note:


2. It only for the DVD disc which is recorded with multi-wubtitle.

3. If there is a sign on the cover of the DVD disc means theat it has several subtitle.

13. Title Select

In DVD mode, press TITLE button to back to the title menu. Display shows all the titles of the disc. You can select the chapter you want by the cursor, press play button to play the chapter.

Note: It just can be worked by the remote control.


INSTRUCTIONS

14. MENU Select

In playing mode, press PBC button on remote control to back to the menu, display will show chapter and section in disc. Work with / button on remote control or touch button on display to choose your desired song. Press button / ENTER button to play.


OPEN: Press OPEN button on panel to eject disc.

15. Program Play

In DVD mode, you can set the sequence of playing by the program function, the operation is as follow:

PROG

TC TC TC TC

1 0 1 : 0 3 5 _ _ : _ _ 9 _ _ : _ _ 13 _ _ : _ _

2 0 1 : 0 6

3 _ _ : _ _

4 _ _ : _ _

6 _ _ : _ _

7 _ _ : _ _

8 _ _ : _ _

PLAY

10 _ _ : _ _

11 _ _ : _ _

12 _ _ : _ _

DELETE

14 _ _ : _ _

15 _ _ : _ _

16 _ _ : _ _

When DVD is playing, press ST / PROG button, then display shows:

For example, program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example, the third song. Program the second song, press button, move the cursor to 2 . input 01, press button move the cursor to th the second lattice, input desired song, for example, the 6 song (press 6). Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.


16. Digital Album

Play the disc contains JPEG pictures, read the picture menu first.

1. Press button on remote control, the pictures will be browsed automatically. (It also can be worked to press number 6 button on the unit.)

2. Press ENTER button on the remote control, it can be manual browsed by SEEK + and

SEEK -.

3. ZOOM in picture function: During auto browsing, press pause button stop the screen, press ZOOM button to zoom in or zoom out the picture. During manual browsing, you can press ZOOM button to zoom in or zoom out picture directly.

4 .Under zoom in picture, you can move the picture by .

Note: You can not move picture in normal mode and zoom out mode.

17. Setup

Press SETUP button, display will show the system setup menu and the submenu, select the item you want by , after selecting the proper item, press / / / to press

ENTER to confirm.

Note:


2. Some function setting maybe different because of the different model or disc.

3. If the selected language is not recorded in the disc, then unit will show the appointed language,

4. About the “SETUP”, please read the follow.

Press “SETUP” on the remote control, it will appear the following touch menu:


SYSTEM SETUP

1. Press or button

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

SYSTEM SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

SYSTEM SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

EXIT SETUP

INSTRUCTIONS


TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

SYSTEM SETUP

NTSC

PAL

AUTO

EXIT SETUP

SYSTEM SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

S-VIDEO

EXIT SETUP

SYSTEM SETUP

TV SYSTEM

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

4:3 PS

4:3 LB

16:9

EXIT SETUP

No results