Samsung LN-T4681F User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service
Consommateurs Samsung.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de
Atención al Cliente.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG (7267864)
www.samsung.com/ca
U.S.A
1-800-SAMSUNG (7267864)
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
LN-T4081F
LN-T4681F
LN-T5281F
LN-T5781F
TFT-LCD TELEVISION
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
BN68-01308A-00
BN68-01308A-00-Cover.indd 1
· Model __________
· Serial No. ____________
2007-07-02 ¿ÀÈÄ 6:25:44
Important Warranty Information Regarding Television Format Viewing
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen
if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as
the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or
computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the
above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To
avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.
On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use,
as well as burned-in images, are not covered by your Samsung limited warranty.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular,
this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618,
5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent
Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial
use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product
unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only
covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights
are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is
limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license
does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process
conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of
this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under
this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased
in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from
the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the
product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States : 1-800-SAMSUNG (1-800-726-7864) In Canada : 1-800-SAMSUNG
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also
known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still
image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and
center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
General Information
■
■
■
■
■
■
List of Features...................................................................2
Accessories........................................................................2
Viewing the Control Panel .................................................3
Viewing the Connection Panel . .........................................4
Remote Control..................................................................5
Installing Batteries in the Remote Control..........................6
Connections
■
■
■
■
■
■
■
■
■
■
Connecting VHF and UHF Antennas..................................6
Connecting Cable TV.........................................................7
Connecting a DVD Player or Cable Box/Satellite
receiver (Set-Top Box) via HDMI........................................8
Connecting a DVD Player or Cable Box/Satellite
receiver (Set-Top Box) via DVI...........................................8
Connecting a DVD Player or Cable Box/Satellite
receiver (Set-Top Box) via Component cables...................9
Connecting a Camcorder ..................................................9
Connecting a VCR............................................................10
Connecting a Digital Audio System..................................11
Connecting an Amplifier/DVD Home Theater...................11
Connecting a PC..............................................................11
Turning the TV On and Off...............................................12
Plug & Play Feature..........................................................12
Changing Channels..........................................................13
Adjusting the Volume........................................................14
Viewing the Display..........................................................14
Viewing the Menus...........................................................15
Memorizing the Channels.................................................15
Setting Up Your Remote Control......................................17
Remote Control Codes.....................................................19
To Select the Source........................................................22
To Edit the Input Source Name.........................................22
Picture Control
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Using Automatic Picture Settings.....................................23
Adjusting the Color Tone..................................................24
Resetting the Picture Settings to the Factory Defaults....24
Adjusting the Detailed Settings.........................................25
Changing the Screen Size................................................28
Setting the Active Color....................................................29
DNIe (Digital Natural Image engine).................................29
Setting the LED SmartLighting.........................................30
Setting the LED Motion Plus.............................................30
Setting the Feature Demo................................................30
Setting the HDMI Black Level...........................................31
Setting the Film Mode.......................................................31
Viewing Picture-in-Picture................................................32
Freezing the Picture.........................................................33
Sound Control
■
■
■
■
■
■
■
■
■
■
■
Customizing the Sound....................................................34
Using Automatic Sound Settings......................................34
Setting the TruSurround XT..............................................35
Choosing a Multi-Channel Sound (MTS) track - Digital . .35
Choosing a Multi-Channel Sound (MTS) track - Analog . 36
Automatic Volume Control................................................36
Selecting the Internal Mute...............................................37
Adjusting the TV On/Off Melody Sound............................37
Listening to the Sound of the Sub (PIP) Picture...............38
Resetting the Sound Settings to the Factory Defaults......38
Connecting Headphones..................................................38
Symbol
■
■
■
■
■
■
■
■
■
■
Selecting the Antenna.......................................................39
Clearing Scrambled Channels - Digital.............................39
Adding and Erasing Channels..........................................40
To Set-Up Your Favorite Channels...................................41
Using the Channel Lists....................................................42
Viewing the Channel Lists................................................42
Labeling Channels............................................................43
LNA (Low Noise Amplifier)................................................43
Fine Tuning Analog Channels...........................................44
Checking the Digital-Signal Strength................................44
PC Display
■
■
■
■
Using Your TV as a Computer (PC) Display.....................45
Display Modes..................................................................45
Setting up the TV with your PC........................................46
Setting the Home Theater PC..........................................47
Time Setting
■ Setting the Clock..............................................................48
Function Description
Operation
■
■
■
■
■
■
■
■
■
■
■
Channel Control
Press
Important
Note
■
■
■
■
■
■
■
■
■
■
■
■
Selecting a Menu Language.............................................51
Setting the Blue Screen Mode..........................................52
Using the Game Mode......................................................52
Viewing Closed Captions (On-Screen Text Messages)
- Analog............................................................................53
Viewing Closed Captions (On-Screen Text Messages)
- Digital.............................................................................54
Menu Transparency Level................................................55
Using the Energy Saving Feature.....................................55
Setting the Function Help.................................................56
Digital Noise Reduction....................................................56
Using the V-Chip...............................................................57
Setting the Light Effect.....................................................64
Upgrading the Software....................................................64
WISELINK
■
■
■
■
■
Using the WISELINK Function.........................................65
Using the WISELINK Menu..............................................66
Using the PHOTO (JPEG) List.........................................67
Using the MP3 List...........................................................74
Using the Setup Menu......................................................76
About Anynet+
■
■
■
■
■
■
■
What is Anynet+? ............................................................78
Connecting Anynet+ Devices...........................................78
Setting Up Anynet+...........................................................79
Scanning and Switching between Anynet+ Devices.........79
Recording.........................................................................80
Listening through a Receiver (Home theater)...................81
Troubleshooting for Anynet+.............................................81
Appendix
■
■
■
■
■
■
■
■
■
■
■
■
One-Touch
Button
English - Troubleshooting................................................................82
Installing the Stand...........................................................84
Disconnecting the Stand...................................................84
Auto Wall-Mount Adjustment (Sold separately)................85
Wall Mount Kit Specifications (VESA)..............................86
Using the Anti-Theft Kensington Lock..............................87
Specifications...................................................................88
Dimensions (LN-T4081F).................................................89
Dimensions (LN-T4681F).................................................90
Dimensions (LN-T4671F).................................................91
Dimensions (LN-T5281F).................................................91
Dimensions (LN-T5781F).................................................92
English
Contents
General Information
List of Features
 Adjustable picture settings that can be stored in the TV’s memory.
 Automatic timer to turn the TV on and off.
 A special sleep timer.
 Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver
(Set-Top Box) needed.
 HDMI/DVI connection of your PC to this TV.
 Remote Control
The supplied remote can be used to operate the TV as well as most DVD players, Cable Box/Satellite receiver
(Set-Top Box) and VCRs.
 Excellent Picture Quality
- DNIe technology provides life-like clear images.
 SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2)
(BN59-00599A)
Power Cord
(3903-000144)
Cleaning Cloth
(BN63-01798A)
Cover-Bottom
LN-T4081F : BN63-03665A
LN-T4681F : BN63-03675A
LN-T5281F : BN63-03799A
LN-T5781F : BN63-03801A
Owner’s Instructions
Warranty Card / Registration
Card / Safety Guide Manual
(Not available in all locations)
The items color and shape may vary depending on the model.
English - Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
1
2
3
4
5
7
6
8
The product color and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as you would
use the ENTER button on the remote control.
2MENU
Press to see an on-screen menu of your TV’s features.
3 + VOL Press to increase or decrease the volume.
In the on-screen menu, use the + VOL - buttons as you would use the ◄ and ► buttons on the remote control.
7
Front Panel buttons
Touch the each button to operate.
5 POWER INDICATOR
Blinks and turns off when the power is on and
lights up in stand-by mode.
6 REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
7 SPEAKERS
8 (Power)
Touch the silver sensor below the ( ) mark to turn the
TV on and off.
4 CH
Press to change channels.
In the on-screen menu, use the
CH
buttons as
you would use the ▲ and ▼ buttons on the remote
control.
English - Silver sensor
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-11.
[Side Panel Jacks]
The product color and shape may vary depending on the model.
1AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
2 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3 PC IN
Connects to the video and audio output jacks on
your PC.
4 HDMI IN 1,2,3 / DVI IN(HDMI1) (AUDIO R/L)
Connects to the HDMI jack of a device with an HDMI output.
Use the HDMI IN 1 jack for DVI connection to an
external device.
Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the DVI IN
(HDMI1) ‘R-AUDIO-L’ jacks for audio.
- No sound connection is needed for an HDMI to HDMI
connection
- When using an HDMI/DVI cable connection, you must use the HDMI IN 1 jack.
5 ANT 1 IN/ANT 2 IN
Connects to an antenna or cable TV system.
6 EX-LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing angle
using your remote control.
7COMPONENT IN 1,2
Connects Component video/audio.
8AV IN 1 / AV IN 2
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
9POWER INPUT
Connects the supplied power cord
0KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The location of the Kensington Lock may be different depending on your TV.
!
HEADPHONE
Connects a set of external headphones for private
listening.
@WISELINK
Connect a USB mass storage device to view photo files
(JPEG) and play audio files (MP3).
English - Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the
TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Cable Box/Satellite receiver
(Set-Top Box)
1POWER
Turns the TV on and off.
2NUMERIC BUTTONS
Press to change the channel.
3–
Press to select additional channels(digital
and analog) being broadcast by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and “3”.
4CH LIST
Used to display Channel Lists on the screen.
5ANTENNA
)SOURCE
aPRE-CH
This function enables you to view and play photo (JPEG) and audio files (MP3) from an external device.
(Refer to pages 67 (JPEG) and 74
(MP3))
c REC
Press to select “AIR” or “CABLE”.
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7VOL / VOL
Press to increase or decrease the
volume.
8 (MUTE)
Press to temporarily cut off the sound.
9MENU
Displays the main on-screen menu.
0S.MODE
Press to select the sound mode.
!RETURN
Returns to the previous menu.
@P.MODE
Press to select the picture mode.
#CAPTION
Controls the caption decoder.
$FAV.CH
Tunes to the previous channel.
bWISELINK
6VCR/DVD Functions
Press to display all of the available
video sources.
his remote can be used to control
T
recording on Samsung DVD recorders
with the Anynet feature.
(Refer to page 80)
d CH
/ CH
Press to change channels.
e EXIT
Press to exit the menu.
f UP▲ / DOWN▼ / LEFT◄ / RIGHT► / ENTER
Use to select on-screen menu items and change menu values.
g INFO
Press to display information on the TV
screen.
h Anynet+
Runs the Anynet+ functions and sets up Anynet devices.
i STILL
Press to stop the action during a
particular scene.
Press again to resume normal video.
j P.SIZE
Picture size selection.
Press to switch to your favorite channels. k PIP
Picture-in Picture ON/OFF.
%SLEEP
l CH /
Press to select a preset time interval Displays the available channels in
for automatic Shut off.
sequence. (These buttons change
^SRS
channels in the PIP window only.)
Selects SRS TruSurround XT mode.
m MTS
&SET
Press to choose stereo, mono or Sets the remote to control your
Separate Audio Program TV, VCR, Cable, DVD or Set-Top Box
(SAP broadcast).
*TV, DVD, STB, CABLE, VCR
Press to operate your TV,DVD, STB, CABLE (box) or VCR
(See pages 17-21)
(When pressing this button, a number
n RESET
When your remote does not work,
change the batteries and press the
RESET button for 2-3 seconds before use.
of buttons on the remote control (e.g.
TV, DVD, STB, CABLE, VCR,
VOL and CH buttons) light up for a few
seconds and then turn off to save
power. This function is convenient for
using the remote at night or when dark.
This is a special remote control for the visually impaired and has Braille
points on the POWER, CH, VOL, STOP and PLAY/PAUSE buttons.
The performance of the remote control may be affected by bright light.
English - Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see "Antennas with
300 Ω Flat Twin Leads" below.
If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75
Ω Round Leads".
If you have two antennas, see "Separate VHF and UHF Antennas".
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 Ω twin flat leads, follow the directions
below.
1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).
Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT 1 IN (AIR) terminal on the back of the TV.
ANT 1 IN
(AIR)
Antennas with 75 Ω Round Leads
1. Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV.
ANT 1 IN
(AIR)
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
UHF
VHF
2. Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel.
UHF
VHF
English - ANT 1 IN
(AIR)
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
ANT 2 IN
(CABLE)
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
ANT IN
ANT OUT
2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT 2 IN
(CABLE)
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
This terminal might be labeled "ANT IN", ANT IN
"VHF IN" or simply, "IN".
2. Connect this cable to a two-way splitter.
Incoming
cable
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
Incoming
cable
Splitter
Splitter
Cable Box
4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
Incoming
cable
Splitter
RF (A/B)
Switch
Cable Box
5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
Incoming
cable
Splitter
Cable Box
6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear
of the TV.
RF (A/B)
Switch
ANT 2 IN
(CABLE)
Incoming
cable
TV Rear
Splitter
Cable Box
RF (A/B)
Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to
view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
English - Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
1. Connect an HDMI Cable
between the HDMI IN
(1,2 or 3) jack on the
TV and the HDMI jack
on the DVD Player or
Cable Box/Satellite receiver
(Set-Top Box)
DVD Player or Cable Box/Satellite receiver
(Set-Top Box) Rear Panel
Side Panel Jacks
TV Rear Panel
or
HDMI Cable (Not supplied)
hat is HDMI?
W
• HDMI(High-Definition Multimedia Interface), is an interface that
enables the transmission of digital audio and video signals using a single cable.
•The difference between HDMI and DVI is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature
installed
ach DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
E
panel configuration.
he TV may not output sound and pictures may be displayed with abnormal color
T
when DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older
than 1.3 are connected. When connecting an older HDMI cable and there is no
sound, connect the HDMI cable to the HDMI IN 1 jack and the audio cables to the
DVI IN (HDMI1) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact
the company that provided the DVD player/Cable Box/Satellite receiver to confirm the
HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1. Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI IN 1
jack on the TV and the DVI
jack on th DVD Player or
Cable Box/Satellite receiver
(Set-Top Box)
TV Rear Panel
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
2. Connect Audio Cables
between the DVI IN (HDMI 1)
[R-AUDIO-L] jack on the
TV and the DVD Player or
Cable Box/Satellite receiver
(Set-Top Box)
2
1
Audio Cable (Not supplied)
DVI to HDMI Cable (Not supplied)
ach DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
E
panel configuration.
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection,you must use the HDMI IN1 jack.
English - Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1. Connect a Component
TV Rear Panel
Cable between the
COMPONENT IN(1 or 2)
[Y, PB, PR] jacks on the TV
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
and the COMPONENT
[Y, PB, PR] jacks on the
DVD Player or Cable Box/
Satellite receiver (Set-Top
Box).
2. Connect Audio Cables
between the COMPONENT
IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the
AUDIO OUT jacks on the
DVD Player or Cable Box/
Satellite receiver (Set-Top
Box).
2
Audio Cable (Not supplied)
1
Component Cable (Not supplied)
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel
configuration.
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color
of the connection terminal to the cable.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR
1. C
onnect a Video Cable
(or S-Video Cable) between
the AV IN2 [VIDEO]
(or S-Video) jack on the TV
and the VIDEO OUT jack on
the camcorder.
2.
Connect Audio Cables
between the AV IN2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
TV Side Panel
1 S-Video Cable (Not supplied)
Camcorder
or
1 Video Cable (Not supplied)
2 Audio Cable (Not supplied)
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
English - Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna
from the back of the TV.
ANT 1 IN ANT 2 IN
(AIR)
(CABLE)
2. Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3.
Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the TV.
TV Rear Panel
VCR Rear Panel
4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1
(or AV IN 2) [VIDEO] jack on
the TV.
5.
Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
If you have a “mono”
(non-stereo) VCR, use a
Y-connector (not supplied)
to hook up to the right
and left audio input jacks
of the TV. If your VCR
is stereo, you must
connect two cables.
5 Audio Cable (Not supplied)
2
4 Video Cable (Not supplied)
3 RF Cable (Not supplied)
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
S-Video Connection
Your Samsung TV can be connected to an S-Video signal from an VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1.
To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
2.
Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV IN1 [S-VIDEO] jack on
the TV.
3.
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN1 [R-AUDIO-L] jacks
on the TV.
TV Rear Panel
VCR Rear Panel
3 Audio Cable (Not supplied)
2 S-Video Cable (Not supplied)
1 RF Cable (Not supplied)
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
English - 10
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1.
Connect an Optical Cable
between the “DIGITAL
AUDIO OUT (OPTICAL)”
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
“DIGITAL AUDIO OUT
(OPTICAL)” jack:
Decrease the volume
of the TV and adjust the
volume level with the
system’s volume control.
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
5.1CH audio is possible when the TV is connected to an antenna.
Each Digital Audio System has a different back panel configuration.
If you have an external device (DVD, Cable/Set top box) connected via HDMI to the TV,
audio is not output from the Optical jack.
When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an
Amplifier or Home Theater, not the TV.
Connecting an Amplifier/DVD Home Theater
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] jacks on the TV
and AUDIO IN [R-AUDIO-L]
jacks on the Amplifier/DVD
Home Theater.
When an audio amplifier is
connected to the "AUDIO
OUT [R-AUDIO-L]"
jack: Decrease the
volume of the TV and adjust
the volume level with the
Amplifier’s volume control.
TV Rear Panel
Amplifier/DVD Home Theater
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection
terminal to the cable.
Connecting a PC
Using the D-Sub Cable
1. C
onnect a D-Sub Cable
between PC IN [PC]
connector on the TV and
the PC output connector
on your computer.
2. C
onnect a PC Audio
Cable between the PC IN
[AUDIO] jack on the TV
and the Audio Out jack of
the sound card on your
computer.
Using the HDMI/DVI Cable
1. C
onnect a HDMI/DVI cable
between the HDMI IN 1
jack on the TV and the
PC output jack on your
computer.
2. C
onnect a 3.5 mm Stereo
mini-plug/2RCA Cable
between the DVI IN(HDMI1)
[R-AUDIO-L] jack on the
TV and the Audio Out jack
of the sound card on your
computer.
Using the D-Sub Cable
TV Rear Panel
PC
2
PC Audio Cable (Not supplied)
1
D-Sub Cable (Not supplied)
TV Rear Panel
Using the HDMI/DVI Cable
PC
2 3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)
1 HDMI/DVI Cable (Not supplied)
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
English - 11
Operation
Turning the TV On and Off
Press the POWER
button on the remote control.
You can also use the POWER
button on the TV.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
Menu language, Shop Mode,
Channels and Time will be set.
1. Press the POWER button on the remote control.
The message “Menu language, Shop Mode, Channels and Time will be set.” is
displayed.
Press the ENTER button, then “Select the language of the OSD” menu
is automatically displayed.
Start
Plug & Play
Select the language of the OSD.
Menu Language :
English
2. Press the ▲ or ▼ button to select language, then press the ENTER button.
The message “Select Home Mode when installing this TV at home.” is displayed.
3. Press the ◄ or ► button to select “Shop” or “Home”, then
press the ENTER button.
The message “Select the antennas to memorize.” is displayed.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press any Volume button and then hold down the MENU button
for five seconds on the side panel of the TV.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select “Start”.
If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to
ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your particular area.
5.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message “Select the clock mode.” is displayed.
To stop the search before it has finished, press the ENTER button with stop selected.
Español
Français
Move Enter
Plug & Play
Select Home Mode when installing this TV at home.
Shop
Home
Move Enter
Skip
Plug & Play
Select the antennas to memorize.
Air
Start
Cable
Start
Air+Cable
Start
Move Enter
Skip
Plug & Play
Auto Program in progress.
Air Channel 50
35%
Stop
Enter
Skip
Plug & Play
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
6. Press the ENTER button.
Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button.
The message “Set to daylight savings time.” is displayed.
Select the clock mode.
If you select “Manual”, “Set current date and time.” is displayed. (See page 48)
Clock Mode
Enter Clock Set
English - 12
Skip
Move Skip
Plug & Play
:
Manual
Auto
Enter
Skip
7. Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button.
The message “Select the time zone in which you live.” is displayed.
Plug & Play
Set to daylight savings time.
Daylight Savings Time
8.
Press the ▲ or ▼ button to highlight the time zone for your local area
Press the ENTER button. If you have received a digital signal, the time will be set
automatically.
If not, see page 49 to set the clock.
Move :
On
Off
Enter
Skip
Plug & Play
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
9. The message “Enjoy your watching.” is displayed.
When you have finished, press the ENTER button.
Move Enter
Skip
Enjoy your watching.
OK
TV
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ENTER button again, to select "Plug & Play".
3. The message “Menu language, Shop Mode, Channels and Time will be set.”
is displayed.
Setup
Plug & Play ►
Language
: English ►
Time ►
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More Move Enter
Return
Menu language, Shop Mode,
Channels and Time will be set.
Start
Changing Channels
Using the Channel Buttons
1. Press the CH
or CH
button to change channels.
When you press the CH or CH button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 16 to memorize channels.
Using the Number Buttons
1. P
ress the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7. The TV will change channels when you press the
second number.
Using the “-” Button
The “-” button is used to select stations that broadcast a digital signal.
1. F
or example, for Channel 7-1, press 7, then -, then 1.
D indicates the TV is receiving a Digital High Definition signal. SD indicates
H
the TV is receiving a Standard Definition signal.
or quick channel change, press the number buttons, then press the ENTER
F
button. English - 13
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
Using the Volume Button
1. Press the VOL
or VOL
button to decrease or increase the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE button and the sound cuts off.
The word "
" will appear in the lower-left corner of the screen.
2. To turn mute off, press the MUTE button again or simply press the
VOL or VOL button.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1. Press the INFO button on the remote control.
Air 7
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Mono
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
05 : 54 pm
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
English - 14
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has five icons:
Picture, Sound, Channel, Setup, Input.
TV
Picture
Mode
Contrast Brightness
Sharpness
Color
Tint G 50
Backlight
▼More
2. Use the ▲ or ▼ button to select one of the five icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
Move : Dynamic
Enter
►
100
45
75
55
R 50
10
Exit
The on-screen menus disappear from the screen after about one minute.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move 2. Press the ENTER button select “Antenna”.
Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button.
Press the EXIT button to exit.
TV
Return
Channel
Antenna
: Air
Air
Auto Program Cable
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move English - 15
Enter
►
►
►
►
►
►
►
►
Enter
Return
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select "Auto Program", then press the ENTER button.
Move 3. Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Enter
TV
Select the antennas to memorize.
ir: “Air” antenna signal.
A
Cable: “Cable” antenna signal.
Air+Cable: “Air” and “Cable” antenna signals.
Air
Start
Cable
Start
Air+Cable
Start
Enter
Enter
TV
Return
Return
Auto Program
Select the cable system.
When selecting the Cable TV system : Press the ENTER button to start the auto
program. By default, the cable TV system is set to “STD”. If you want to select another type of cable system, press the ▲ or ▼ button to select
“STD”, “HRC” or “IRC”.
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Press the ENTER button to start the auto program.
To stop the search before it has finished, press the ENTER button with stop selected.
Return
Channel
Move Move
4.
►
►
►
►
►
►
►
►
Move Move
Enter
Enter
Return
Return
Auto Program
Auto Program in Progress.
5. After all the available channels are stored, the “Auto Program” menu reappears.
Press the EXIT button to exit.
Cable Channel 50
50%
Stop
Enter
Return
Auto Program
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
English - 16
Enter
Return
Setting Up Your Remote Control
After the television has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding
button on the remote control allows you to switch between these modes and control
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes
and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1.Turn off your VCR. 2. Press the VCR button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the VCR code
listed on page 19 of this manual for your brand of VCR. Make sure you enter three
digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5.Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try one of the
other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your
TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1.Turn off your cable box.
2. Press the CABLE button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the cable box
code listed on page 20 of this manual for your brand of cable box. Make sure you enter
three digits of the code, even if the first digit is a “0”. (If there is more than one code
listed, try the first one.)
5.Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of cable box. If no other codes are listed, try each
code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your
TV’s volume.
English - 17
Setting Up the Remote to Operate Your DVD
1.Turn off your DVD.
2. Press the DVD button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the DVD code
listed on page 20~21 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5.Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3 and 4, but try one of the
other codes listed for your brand of DVD.
If no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your
TV’s volume.
Setting Up the Remote to Operate Your STB
1.Turn off your STB.
2. Press the STB button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the STB code
listed on page 21 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5.Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the
other codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
ote on Using Remote Control Modes: STB
N
When your remote control is in “STB” mode, the volume buttons still control your
TV’s volume.
English - 18
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
English - 19
Code
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
073 074 075 076
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001
041
003 024
025 030
038 039
025 030
019 023
026
003 022
019 021
004 018
014 022
003
002 003 004 005 006 007
031
028
027 037 044
023 028
020 044
040
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
077 078 079 082
080 125
081
065
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
Brand
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
English - 20
Code
092
091
022 033
073
051 108
073
059 100
074 075
025 031
057
058
054
055
056
076 093
074 094
073
048 049
052
053
144
074
105
072
076 092
044 045
046 047
023
115 116
109
106 107
050
119
DVD
Brand
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
Code
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062 090
094
Brand
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Brand
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
Code
016 021
016
064
018
015
047 048
015 016
041 042
046 049
058 059
016
065 066
051 052
064
057
026
020 027
031
005 006
064
064
054 060
015 017
060 066
016 021
024 031
SAMSUNG SET-TOP BOX
Product
Ground wave STB
CABLE STB
Satellite STB
Code
000 001 002 008 013
000 004 008 013
000 003 008 013
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldstar)
Code
023
043
018 034
019
035
015 016
065 066
074
069 070
069
018 024
027
025 069
069
069
065
046 047
069
056
022
015 017
020
020
059
063
069 070
044 073
017 019 022 045 060 061 062
067 068
032
070 071
048 063 064
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
English - 21
036 038 039 040 041 042
064
017 021 033 036 038 039 040
067
050 063
061 062
053 065 066
007
028 029 030 072
037 055 056 057
068
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source
of your choice.
TV
Input
Source List
: TV ►
Edit Name ►
WISELINK
Anynet+ (HDMI-CEC)
1. Press the MENU button to display the menu.
Press the▲ or ▼ button to select “Input”, then press the ENTER button.
2. Press the ENTER button to select "Source List".
Press the ▲ or ▼ button to select signal source, then press the ENTER button.
ou can choose between the following sets of jacks: AV1, S-Video1,
Y
Component1, Component2, PC, HDMI1, or HDMI2 on the TV’s rear panel and
AV2, S-Video2, or HDMI3 on the TV’s side panel.
Move TV
Return
Source List
TV
AV1
AV2
S-Video1
S-Video2
Component1
Component2
HDMI1, HDMI2, HDMI3 input can only be selected when the external device is turned on and connected via HDMI.
You can choose only those external devices that are connected to the TV.
Enter
: ---: ---: ---: ---: ---: ----
▼More
Move Enter
Return
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the▲ or ▼ button to select “Input”, then press the ENTER button.
Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
TV
Input
Source List
: TV ►
Edit Name ►
WISELINK
Anynet+ (HDMI-CEC)
Move 2. Press the ▲ or ▼ button to select "AV1", "AV2", "S-Video1", "S-Video2", "Component1", "Component2", "PC", "HDMI1", "HDMI2", "HDMI3" input jack, then press the ENTER button.
TV
AV1
AV2
S-Video1
S-Video2
Component1
Component2
▼More
3.
Press the ▲ or ▼ button to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "Game", "Camcorder", "DVD Combo", "PC", "VOD STB", "TV" input source, then press the ENTER button.
Press the EXIT button to exit.
hen a PC with a resolution of 1920 x 1080@60Hz is connected to the
W
HDMI IN 1 port, you should set the" HDMI1" mode to "PC" in the "Edit Name" of
the "Input" mode. If the "HDMI1" mode is not PC, it works depending on the TV
setting.
English - 22
Enter
Return
Edit Name
Move TV
: ---: ---: ---: ---: ---: ----
Enter
Return
Edit Name
AV1
: -------AV2
: ----VCR
S-Video1
: ----DVD
S-Video2
: ----D-VHS
Component1
: ----Cable STB
Component2
: ---HD STB
Satellite STB
▼More
PVR STB
▼
Move Enter
Return
Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory. You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
Picture
Mode
Contrast Brightness
Sharpness
Color
Tint G 50
Backlight
▼More
: Dynamic
Move 2. Press the ENTER button to select "Mode".
Press the ▲ or ▼ button to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
TV
Enter
Return
Picture
Mode
Contrast Brightness
Sharpness
Color
Tint G 50
Backlight
▼More
 Choose Dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for the standard factory settings.
 Choose Movie for a natural Image without picture enhancements.
►
100
45
75
55
R 50
10
: Dynamic
Dynamic
Standard
Movie
Move Enter
100
45
75
55
R 50
10
Return
3. P
ress the ▲ or ▼ button to select "Contrast", "Brightness", "Sharpness", "Color", "Tint(G/R)" or "Backlight", then press the ENTER button.
4. Press the ◄ or ► button to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ► button increases it.
Press the ENTER button.
TV
Press the EXIT button to exit.
W
hen you make changes to "Contrast", "Brightness", "Sharpness", "Color", "Tint(G/R)" or "Backlight", the OSD will be adjusted accordingly.
When in PC mode, Tint, Sharpness and Color are not available.
Each adjusted setting will be stored separately according to its input mode.
Picture
Mode
Contrast Brightness
Sharpness
Color
Tint G 50
Backlight
▼More
Move ▲
Contrast
▼
English - 23
Enter
►
100
45
75
55
R 50
10
Return
100
Move Press the P.MODE button on the remote control repeatedly to select the desired picture mode.
: Dynamic
Adjust
Return
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
TV
2. Press the ▲ or ▼ button to select "Color Tone", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Cool2", "Cool1", "Normal", "Warm1"
or "Warm2".
Press the ENTER button.
hen the picture mode is set to "Dynamic" or "Standard", "Warm1" and
W
"Warm2" cannot be selected. "Movie" mode is only available.
Picture
▲More
Color Tone
: Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color
: On
DNle
: On
▼More
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
Move TV
Enter
►
►
►
►
►
►
Return
Picture
▲More
Cool2
Color Tone
: Cool2
Detailed Settings Cool1
Normal
Size
: 16 : 9
Warm1
Digital NR
: Low
Warm2
Active Color
: On
DNle
: On
▼More
Each adjusted setting will be stored separately according to its input mode.
Move Enter
Return
Resetting the Picture Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
TV
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
Press the ▲ or ▼ button to select “Cancel” or “OK” then press the ENTER button.
Press the EXIT button to exit.
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Feature Demo
: Off
Reset
: OK
►
►
►
►
Each mode can be reset.
Move TV
Enter
Return
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Feature Demo
: Off
OK
Cancel
Reset
: OK
Move English - 24
Enter
Return
Adjusting the Detailed Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed
picture settings.
Activating Detailed Settings
TV
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ENTER button to select “Mode”
Press the ▲ or ▼ button to select "Standard" or "Movie", then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Detailed Settings”, then press the
ENTER button.
"Detailed Settings" is available in "Standard" or "Movie" mode.
If "DNIe" is Off, the "Detailed Settings" cannot be selected when the Picture
mode is in "Standard" mode.
Picture
Mode
Contrast Brightness
Sharpness
Color
Tint G 50
Backlight
▼More
: Movie
Move Enter
TV
Move TV
4. Press the ▲ or ▼ button to select “Black adjust”, then press the ENTER button.
5. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”.
Press the ENTER button.
Move TV
 Off: Turns off the black adjustment function.
 Low: Sets the black color depth to low.
 Medium: Sets the black color depth to medium.
 High: Sets the black color depth to high.
Enter
►
►
►
►
►
►
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
You can select the black level on the screen to adjust the screen depth.
Return
Picture
▲More
Color Tone
: Warm2
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color
: Off
DNle
: Off
▼More
Activating Black adjust
►
80
45
20
50
R 50
5
: Off
: Off
: 0
: Auto
: Off
: Off
Enter
►
►
►
►
►
►
►
►
Return
Detailed Settings
Black Adjust
: Off
Off
Dynamic Contrast
: Off
Low
Gamma
: 0 Medium
High
: Auto
Color Space
White Balance
My Color Control
Edge Enhancement
: Off
XVYCC
: Off
Move TV
Activating Dynamic Contrast
6. Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the
ENTER button.
7. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”.
Press the ENTER button.
Move TV
: Off
: Off
: 0
: Auto
: Off
: Off
Enter
►
►
►
►
►
►
►
►
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Move English - 25
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
You can adjust the screen contrast so that the optimal contrast is provided.
 Off: Turns off the dynamic contrast adjustment function.
 Low: Sets the dynamic contrast to low.
 Medium: Sets the dynamic contrast to medium.
 High: Sets the dynamic contrast to high.
Enter
: Off
: Off
Off
: 0Low
Medium
: Auto
High
: Off
: Off
Enter
Return
Activating Gamma
You can adjust the Primary Color (Red, Green Blue) Intensity. (-3 ~ +3)
TV
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
8. Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button.
9. Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Move : Off
: Off
: 0
: Auto
: Off
: Off
Enter
Return
0
Gamma
Adjust
TV
Changing the Color Space
10.Press the ▲ or ▼ button to select “Color Space”, then press the ENTER button.
11.Press the ▲ or ▼ button to select “Auto” or “Wide”.
Press the ENTER button.
Move  Auto : Auto Color Space automatically adjusts to the most natural color tone based on
program sources.
 Wide : Wide Color Space offers deep and rich color tone.
TV
You can adjust the color temperature for more natural picture colors.
TV
14.Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
 R-Offset: Adjusts the red color darkness.
 G-Offset: Adjusts the green color darkness.
 B-Offset: Adjusts the blue color darkness.
 R-Gain: Adjusts the red color brightness.
 G-Gain: Adjusts the green color brightness.
 B-Gain: Adjusts the blue color brightness.
 Reset: The previously adjusted white balance will be reset to the factory defaults.
Return
: Off
: Off
: 0
: Auto
Auto
Wide
: Off
: Off
Return
Detailed Settings
Move TV
: Off
: Off
: 0
: Auto
►
►
►
►
►
►
►
►
: Off
: Off
Enter
Return
White Balance
R-Offset
G-Offset
B-Offset
R-Gain
G-Gain
B-Gain
Reset
Move Changing the adjustment value will refresh the adjusted screen.
15
15
15
15
15
15
Enter
▲
R-Offset
▼
Return
15
Move English - 26
: Off
: Off
Enter
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
13.Select the required option by pressing the ▲ or ▼ button, then press the
ENTER button.
►
►
►
►
►
►
►
►
Enter
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
12.Press the ▲ or ▼ button to select “White Balance”, then press the ENTER
button.
: Off
: Off
: 0
: Auto
Detailed Settings
Move Activating White Balance
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Color space is a color matrix composed of red, green and blue colors.
Select your favorite color space to experience the most natural color.
►
►
►
►
►
►
►
►
Adjust
Return
Activating My Color Control
TV
15.Press the ENTER button to select “My Color Control”.
16.Press the ▲ or ▼ button to select “Pink”, “Green”, “Blue”, “White” or “Reset”.
Press the ENTER button.
Move 17.Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
TV
: Off
: Off
Enter
Move Return
15
15
15
15
Enter
Return
▲
Pink
▼
15
Move Adjust
TV
You can emphasize object boundaries in the picture.
►
►
►
►
►
►
►
►
My Color Control
Changing the adjustment value will refresh the adjusted screen.
Activating Edge Enhancement
: Off
: Off
: 0
: Auto
Pink
Green
Blue
White
Reset
 Pink: Darkens or lightens the pink color
 Green: Darkens or lightens the green color
 Blue: Darkens or lightens the blue color
 White: Darkens or lightens the white color
 Reset: The previously adjusted colors will be reset to the factory defaults.
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
This setting can be adjusted to suit your personal preferences. When using the My Color
Control Feature, the current picture remains in movement.
Return
Detailed Settings
Black adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
18.Press the ▲ or ▼ button to select “Edge Enhancement”, then press the
ENTER button.
19.Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
Move TV
: Off
: Off
: 0
: Auto
: Off
: Off
Enter
►
►
►
►
►
►
►
►
Return
Detailed Settings
Black adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Move : Off
: Off
:0
: Auto
: Off
Off
On
: Off
Enter
►
Return
Activating XVYCC
Setting the xvYCC mode to On increases detail and color space when watching movies
from an external device (ie. DVD player) connected to the HDMI or Component IN
jacks. You must set the Picture Mode to Movie to enjoy this feature.
TV
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
20.Press the ▲ or ▼ button to select “XVYCC”, then press the ENTER button.
21.Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
Press the EXIT button to exit.
Move Only available in HDMI and Component on Movie option.
If xvYCC function is active, PIP cannot be selected.
TV
: Off
: Off
Enter
►
►
►
►
►
►
►
►
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Move English - 27
: Off
: Off
: 0
: Auto
: Off
: Off
:0
: Auto
: Off
Off
On
: Off
Enter
►
Return
Changing the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed
to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general,
though, you should view the TV in 16:9 mode as much as possible.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
2. Press the ▲ or ▼ button to select "Size", then press the ENTER button.
3. Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
Picture
▲More
Color Tone : Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color : On
DNle
: On
▼More
Move TV
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 :Magnifies the size of the picture more than “Zoom1”.
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
• Just Scan : Use the function to see the full image without any cutoff when
HDMI (720p/1080i/1080p), Component (720p/1080i/1080p) or
DTV (1080i) signals are input.
Enter
►
►
►
►
►
►
Return
Size
16 : 9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
Move ►
►
►
Enter
Return
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image
may be burned onto the screen. View the TV in 16:9 mode as much as possible.
HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
16:9
Sets the picture to 16:9 wide mode.
Zoom1
The screen size when Wide screen
is vertically enlarged.
Zoom2
The screen size when the Zoom1
screen is vertically enlarged.
Wide Fit
Enlarges the aspect ratio of the
picture to fit the entire screen.
4:3
Sets the picture to 4:3
normal mode.
Just Scan
Use the function to see the full
image without any cutoff when
HDMI(720p/1080i/1080p),
Component (720p/1080i/1080p) or
DTV (1080i) signals are input.
• In TV, VIDEO, S-VIDEO and all COMPONENT (480i, 480p) modes, all screen modes can be selected.
(16:9, Zoom1, Zoom2, 4:3).
• You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV(1080i), Component (720p, 1080i, 1080p) or
HDMI (720p, 1080i, 1080P) mode.
• In PC modes, only 16:9 & 4:3 modes can be selected.
• You must select Zoom with P.SIZE button on the remote if you want to move the Zoom 1 or 2 picture up or down.
•W
hen watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by
expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not
support all external devices (DVD, VCR etc.).
•W
hen Double (
,
) mode has been set in PIP, the Picture Size cannot be set.
English - 28
Setting the Active Color
If you turn on this option, the blue and green colors will be more vivid.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
2. Press the ▲ or ▼ button to select "Active Color", then press the ENTER button.
3.Press the ▲ or ▼ button to select "Off" or "On"
Press the ENTER button.
Press the EXIT button to exit.
"Active Color" is available only in "Dynamic" mode.
This function doesn’t work when the Input Source is PC.
Picture
▲More
Color Tone : Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color : On
DNle
: On
▼More
Move TV
TV
Enter
►
►
►
►
►
►
Return
Picture
Picture
▲More
Color Tone : Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color : Off
Off
On
DNle
: Off
▼More
Move Move Enter
Enter
Return
Return
DNIe (Digital Natural Image engine)
This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the
DNIe feature activated. Using this function, you can view the difference in the visual quality.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
2. Press the ▲ or ▼ button to select "DNIe", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Off", "Demo" or "On", then press the
ENTER button.
• Off: Switches off the DNIe mode.
• On: Switches on the DNIe mode.
Picture
▲More
Color Tone : Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color : On
DNle
: On
▼More
Move TV
Press the EXIT button to exit.
DNIeTM (Digital Natural Image engine)
This feature brings you a more detailed image with 3D noise reduction and detailed, contrast and white enhancement.
This function doesn’t work when the Input Source is PC.
The DNle function is not supported in the Movie mode.
English - 29
Enter
►
►
►
►
►
►
Return
Picture
▲More
Color Tone : Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color : Off
Off
On
DNle
: Off
▼More
Move Enter
Return
Setting the LED SmartLighting
Controls LED backlight to maximize picture clarity.
TV
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. P
ress the ▲ or ▼ button to select "LED SmartLighting", then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Off” or “On” then press the ENTER button.
Press the ENTER button.
If “Feature Demo” is On, this function is not available.
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Feature Demo
: Off
Reset
: OK
Move TV
Enter
►
►
►
►
Return
Picture
▲More
Off
LED SmartLighting: On
On
LED Motion Plus : Off
Feature Demo
: Off
Reset
: OK
Move Enter
Return
Setting the LED Motion Plus
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
TV
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Feature Demo
: Off
Reset
: OK
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
►
►
►
►
2. P
ress the ▲ or ▼ button to select "LED Motion Plus", then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Off” or “On” then press the ENTER button.
Press the ENTER button.
Move TV
If “Feature Demo” is On, this function is not available.
Enter
Return
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Off
On
Feature Demo
: Off
Reset
: OK
Move Enter
Return
Setting the Feature Demo
Feature Demo allows you to compare the enhanced screen quality of the “LED
SmartLighting” and “LED Motion Plus” features with the original picture.
TV
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. P
ress the ▲ or ▼ button to select "Feature Demo", then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Off” or “On” then press the ENTER button.
Press the ENTER button.
The
Demo screen for the "LED SmartLighting" and "LED Motion Plus" is
displayed. The right figure shows the screen before the LED Feature is applied.
The left figure shows the screen after the LED Feature is applied.
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Feature Demo
: Off
Reset
: OK
Move TV
Return
Picture
▲More
LED SmartLighting: On
LED Motion Plus : Off
Feature Demo
: Off
Off
Reset
: OK
On
Move English - 30
Enter
►
►
►
►
Enter
Return
Setting the HDMI Black Level
You can select the black level on the screen to adjust the screen depth.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select “HDMI Black Level”, then
press the ENTER button.
3. Press the ▲ or ▼ button to select “Normal” or “Low ”, then press
the ENTER button.
Setup
▲ More
HDMI Black Level
: Low
►
Film Mode
: Off
►
Wall-Mount Adjustment
►
PIP
Function Help
: On
►
►
SW Upgrade
Move TV
Enter
Setup
• Normal: The screen gets brighter.
▲ More
HDMI Black Level
• Low: The screen gets darker.
Film Mode
Wall-Mount Adjustment
►
Return
: Normal►
Normal
Low ►
: Low
PIP
Function Help
: On
T
his function is active only when the external input connects to HDMI
(RGB signals). "HDMI Black Level" function may not be compatible with or
external devices.
SW Upgrade
Press the EXIT button to exit.
Move Enter
Return
Setting the Film Mode
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select "Film Mode", then press the ENTER button.
: Low
Film Mode
: Off
Wall-Mount Adjustment
PIP
Function Help
: On
SW Upgrade
3. Press the ▲ or ▼ button to select "On" or "Off", then press the ENTER button.
Press the EXIT button to exit.
"Film mode" is supported in TV, VIDEO, S-VIDEO, COMPONENT(480i / 1080i)
and HDMI(480i / 1080i).
Setup
▲ More
HDMI Black Level
Move TV
Enter
►
►
►
►
►
►
Return
Setup
▲ More
HDMI Black Level
: Low
Film Mode
: Low
Off
Wall-Mount Adjustment On
PIP
►
Function Help
: On
SW Upgrade
English - 31
Move Enter
Return
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen and a different one in the PIP screen. Please see ‘PIP Settings’ below for details. You can use the PIP
feature to simultaneously watch two video sources. (See page 38 to select the PIP picture sound.)
While V-Chip (See page 58) is in operation, the PIP function cannot be used.
While xvYCC (See page 28) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select "PIP", then press the ENTER button.
TV
Setup
▲ More
HDMI Black Level
: Low
►
►
PIP
►
Function Help
►
: On
SW Upgrade
2. Press the ENTER button again.
Press the▲ or ▼ button to select "On", then press the ENTER button.
Move Enter
TV
Sub picture
Component 1,2
HDMI 1,2,3
PC
Analog TV broadcasts only
Return
Size
Position
Channel
: Off
: On
:
: Air 3
Move Main picture
►
PIP
PIP If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1, 2, 3,
Component1,2 or PC
►
Film Mode
: Off
Wall-Mount Adjustment
Enter
Return
Alternately, you can press the PIP button on the remote control repeatedly to activate or deactivate the PIP.
TV
Changing the PIP Channel
3. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Press the ▲ or ▼ button to select the desired channel in the PIP window.
Press the ENTER button.
MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
PIP
PIP Size
Position
: On
: :
►
►
►
Channel
: Air 3
►
Move TV
PIP Size
Position
Channel
Move Alternatly, you can press the PIP Channel buttons on the remote control.
English - 32
Enter
Return
PIP
: On
: :
▲
: Cable
Air 33
▼
Enter
Return
Changing the Position of the PIP Window
4. Press the ▲ or ▼ button to select “Position”, then press the ENTER button.
Press the ▲ or ▼ button to select the desired channel in the PIP window.
TV
Press the ENTER button.
In Double Window (
selected.
), and Double Wide (
) modes, "Position" cannot be
PIP
PIP : On
►
Size
Position
:
:
►
►
Channel
: Air 3
►
Move Enter
TV
PIP
PIP : On
Size
Position
:
:
Channel
: Cable 3
Move Changing the Size of the PIP Window
TV
Enter
Return
PIP
PIP Size
Position
Channel
5. Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
Press the ▲ or ▼ button to select the desired channel in the PIP window.
Press the ENTER button.
Return
: On
: :
: Air 3
►
►
►
►
Press the EXIT button to exit.
If the main picture is in PC and HDMI 1 mode, "Size" is not available.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
You can adjust picture position only by using the
size menu.
Move TV
PIP Size
Position
Channel
Move Freezing the Picture
1. Press the STILL button to freeze a moving picture.
Normal sound will still be heard. Press again to cancel.
While V-Chip is in operation, the Still function cannot be used.
English - 33
Enter
Return
PIP
: On
:
:
: Cable 3
Enter
Return
Sound Control
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the "automatic" settings.)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
TV
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER button.
Move 3. Press the ◄ or ► button to select a particular frequency to adjust.
Press the ▲ or ▼ button to increase or decrease the level of the particular frequency.
TV
Press the ENTER button.
L
+
+
0
0
-
Balance
•L/R Sound Balance Adjustment: To adjust the sound balance of the L/R
speakers.
Return
Equalizer
R
Press the EXIT button to exit.
Enter
►
►
►
►
►
►
►
Move 100Hz 300Hz 1KHz 3KHz 10KHz
Adjust
Return
•Bandwidth Adjustment (100Hz, 300Hz, 1KHz, 3KHz, 10KHz):
To adjust the level of different bandwidth frequencies.
If you make any changes to the equalizer settings, the sound mode is
automatically switched to the "Custom" mode.
Using Automatic Sound Settings
Your TV has automatic sound settings ("Standard", "Music", "Movie", "Speech" and "Custom") that are preset at the factory.
Or, you can select "Custom", which automatically recalls your personalized sound settings.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
TV
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
Move 2. Press the ENTER button to select "Mode".
Press the ▲ or ▼ button to select "Standard", "Music", "Movie", "Speech", or "Custom" sound setting, then press the ENTER button.
Press the EXIT button to exit.
• Choose Standard for the standard factory settings.
• Choose Music when watching music videos or concerts.
• Choose Movie when watching movies.
• Choose Speech when watching a show that is mostly dialog (i.e., news).
• Choose Custom to recall your personalized settings
(see “Customizing the Sound”).
Press the S.MODE button on the remote control repeatedly to select one of the sound settings.
English - 34
TV
Enter
►
►
►
►
►
►
►
Return
Sound
Mode
: Custom
Standard
Music
Equalizer
SRS TruSurround XT: Off Movie
Speech
Multi-Track Options
Custom
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
Move Enter
Return
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.
1. Press the MENU button to display the menu.
TV
Sound
Mode
: Custom ►
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
2. Press the ▲ or ▼ button to select "SRS TruSurround XT", then press the
ENTER button.
Move 3. Press the ▲ or ▼ button to select "On" or "Off", then press the ENTER button.
TV
Enter
►
►
►
►
►
►
Return
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off Off
Multi-Track Options
On
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
Press the EXIT button to exit.
Press the SRS button on the remote control to select On or Off.
Move TRADEMARK & LABEL LICENSE NOTICE
Enter
Return
TruSurround XT, SRS and
Symbol are
trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
Choosing a Multi-Channel Sound (MTS) track - Digital
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous
translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
Preferred Language
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
Quick way to access the MTS menu: Just press the “MTS” button on the remote control. You can listen in a language other than your chosen language by pressing the MTS button.
2. Press the ▲ or ▼ button to select "“Multi-Track Options", then press the ENTER button.
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
Move TV
3. Press the ENTER button to select “Preferred Language”.
Press the ▲ or ▼ button to choose the language (English, Spanish or French) you want, then press the ENTER button.
Enter
►
►
►
►
►
►
►
Return
Multi-Track Options
Preferred Language: English Multi-Track Sound : Stereo
►
►
Press the EXIT button to exit.
"Multi-Track Options" is available only in TV mode.
You can only select the language from among the actual languages being broadcast.
TV
Enter
Multi-Track Options
Preferred Language: English
English
Spanish
Multi-Track Sound : Stereo
French
Move You can listen in a language other than the favorite language by pressing
the MTS button on the remote control.
English - 35
Return
Enter
Return
Choosing a Multi-Channel Sound (MTS) track - Analog
Multi-Track Sound
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
TV
Multi-Track Options
Preferred Language: English Multi-Track Sound : Stereo
►
►
2. Press the ▲ or ▼ button to select "“Multi-Track Options", then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Multi-Track Sound”, then press the ENTER button.
Press the ▲ or ▼ button to select a setting you want, then press the ENTER button.
Press the EXIT button to exit.
TV
Return
Preferred Language: English Multi-Track Sound : StereoMono
Stereo
SAP
• Choose Mono for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
Enter
Multi-Track Options
Move Enter
Return
"Multi-Track Options" is available only in TV mode.
Press the MTS button on the remote control repeatedly to select “Mono”,
“Stereo” or “SAP”.
Automatic Volume Control
Reduces the differences in volume level among broadcasters.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER button.
3. Press the ▲ or ▼ button to set Auto Volume "On" or "Off" then press the
ENTER button.
Press the EXIT button to exit.
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
Move TV
Return
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Off
Auto Volume : Off
On
Internal Mute
: Off
Sound Select
Reset
Move English - 36
Enter
►
►
►
►
►
►
►
: Main
Enter
Return
Selecting the Internal Mute
Sound output from the TV speakers is muted.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
TV
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
2. Press the ▲ or ▼ button to select "Internal Mute", then press the ENTER button.
Move TV
3. Press the ▲ or ▼ button to select “On”, then press the ENTER button.
hen “Internal mute” is set to “On”, Sound menus except “Multi-Track Options”
W
and “Sound Select” (in PIP mode) cannot be adjusted.
The VOL , VOL
is set to On.
Enter
and MUTE buttons do not operate when the Internal Mute Sound
Move TV'S Internal Speakers
Return
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Off
On
Sound Select
: Main
Reset
Press the EXIT button to exit.
►
►
►
►
►
►
►
Enter
Return
Audio Out (Optical, L/R Out) to Sound System
RF
AV, S-Video
Component, PC, HDMI
RF
AV, S-Video
Component, PC, HDMI
Internal Mute Off
Speaker Output
Speaker Output
Speaker Output
Sound Output
Sound Output
Sound Output
Internal Mute On
Mute
Mute
Mute
Sound Output
Sound Output
Sound Output
Video No Signal
Mute
Mute
Mute
Mute
Mute
Mute
Adjusting the TV On/Off Melody Sound
A melody sound can be set to come on when the TV is powered On or Off.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select "Melody", then press the ENTER button.
3. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”, then press
the ENTER button.
• Off : Turns off the melody function.
• Low : Sets the melody volume to low.
• Medium : Sets the melody volume to medium.
• High : Sets the melody volume to high.
Setup
▲More
Blue Screen
: Off ►
Melody
: Medium ►
PC ►
Home Theater PC : Off ►
Light Effect
: In Watching TV ►
Energy Saving
: Off ►
▼ More
Move Enter
Return
TV
Setup
▲More
Blue Screen
▼ More
Press the EXIT button to exit.
TRADEMARK & LABEL LICENSE NOTICE
Manufactured under license from Dolby Laboratorories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
English - 37
: Off
Off
Melody
: Off
Low
PC Medium
Home Theater PC : Off
High
Light Effect
: In Watching TV
Energy Saving
: Off
Move Enter
Return
Listening to the Sound of the Sub (PIP) Picture
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
TV
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
2. Press the ▲ or ▼ button to select "Sound Select”, then press the ENTER button.
Move TV
Return
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Main
Sound Select
: Main
Sub
Reset
3. Press the ▲ or ▼ button to select “Main” or “Sub”, then press the ENTER button.
Press the EXIT button to exit.
• Main: Used to listen to the sound of the main picture.
• Sub: Used to listen to the sound of the sub picture.
Enter
►
►
►
►
►
►
►
Move You can select this option when “PIP” is set to “On”.
Enter
Return
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated(Refer to page 52).
Selecting the Reset function resets the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Reset”, then press the ENTER button.
Press the EXIT button to exit.
TV
Sound
Mode
: Custom Equalizer
SRS TruSurround XT: Off
Multi-Track Options
Auto Volume : Off
Internal Mute
: Off
Sound Select
: Main
Reset
Move Enter
►
►
►
►
►
►
►
Return
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing the other people in the
room.
When you insert the headphone’s plug into the headphone jack, only “Auto Volume”
in the Sound menu can be operated.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones
to the system.
The headphone volume and TV volume are adjusted separately.
English - 38
10
TV Side Panel
Channel Control
Selecting the Antenna
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move 2. Press the ENTER button to select “Antenna”.
Press the ▲ or ▼ button to select “Air” or “Cable”,then press the
ENTER button.
TV
►
►
►
►
►
►
►
►
Enter
Return
Channel
Antenna
: Air
Air
Auto Program Cable
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Press the EXIT button to exit.
If the antenna is connected to ANT 1 IN (AIR),
select “Air” and if it is connected to ANT 2 IN
(CABLE), select “Cable”.
Move Enter
Return
or
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE)
are connected, select the antenna input you want.
If the antenna input is not selected properly, noise
may appear on the screen.
P
ress the ANTENNA button on the
remote control.
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Clear Scrambled Channel", then press the ENTER button.
It searches scrambled channels, which are to be removed from the list.
To stop searching scrambled channels;
Press the ENTER button to select Stop.
Press the ◄ button to select Yes, then press the ENTER button.
TV
Channel
Antenna
: Cable
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move ►
►
►
►
►
►
►
►
Enter
Return
Clear Scrambled Channel
Removing scrambled channel.
DTV Cable 3-1
50%
3. When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.
Stop
Enter
Return
Clear Scrambled Channel
Only cable mode is available.
Scrambled Channel Searching is completed.
0 Channels are deleted.
English - 39
Return
Adding and Erasing Channels
You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto Program.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select "Channel List", then press the
ENTER button.
Move 3. Press the ENTER button to select “All”.
Enter
TV
►
►
►
►
►
►
►
►
Return
Channel List
All
Added
Favorite
Default List Mode
: All ►
4. Press the ◄, ►, ▲ or ▼ button to select a channel to delete, then press the
ENTER button.
Press the ▲ or ▼ button to select “Delete”, then press the ENTER button to
delete the channel.
The
mark will disappear.
Move Air 5
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
Press the ▲ or ▼ button to select “Add”, then press the ENTER button to
add the channel.
The
mark will appear and the channel will be added.
Press the EXIT button to exit.
• P.MODE (Red) button: Press repeatedly to select “All”, “Added” or “Favorite”.
• S.MODE (Green) button: Press to add all channels deleted.
• STILL (Yellow) button: Press to delete all channels memorized.
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
Air 5
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
CH
Air 9
Air 10
DTV Air 10-1
Watch
DTV Air 10-2
Add
DTV Air 10-3
Delete
DTV Air 10-1
Favorite
DTV Air 10-2
DTV Air 10-3
List Mode
Page
1/2
Return
1/2
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
Add All
Enter
Return
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
1/2
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
Add All
Channel List / All
Move
English - 40
CH
Return
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
Add All
Page
Return
Channel List / All
Air 5
All selected channels will be shown on “Added" menu.
Air 9
Air 10
DTV Air 10-1
Watch
DTV Air 10-2
Add
DTV Air 10-3
Delete
DTV Air 10-1
Favorite
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
Channel List / All
Air 5
5. Press the ◄, ►, ▲ or ▼ button to select a channel to add, then press the
ENTER button.
Enter
Channel List / All
1/2
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
Add All
CH
Page
Return
To Set-Up Your Favorite Channels
You can set channels you watch frequently as favorites.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select "Channel List", then press the
ENTER button
Move 3. Press the ▲ or ▼ button to select "All" or "Added", then press the ENTER button.
TV
►
►
►
►
►
►
►
►
Enter
Return
Channel List
All
Added
Favorite
Default List Mode
: All ►
Move 4. P
ress the ◄, ►, ▲ or ▼ button to select your favorite channels to watch
among the labeled channels. Then press the ENTER button.
Press the ▲ or ▼ button to select “Favorite”, then press the ENTER button.
The " " symbol will be highlighted and the channel will be set as a Favorite.
To cancel your Favorite channel selection, press the ENTER button until the
" " symbol is no longer highlighted.
Press the EXIT button to exit.
Air 5
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
Only memorized channels can be set as favorite channels.
All favorite channels will be shown in the “Favorite” menu.
Enter
Air 9
Air 10
DTV Air 10-1
Watch
DTV Air 10-2
Add
DTV Air 10-3
Delete
DTV Air 10-1
Favorite
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
Return
Air 5
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
1/2
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
List Mode
T
o select the favorite channels you have set up, press the FAV.CH button
on the remote control.
English - 41
1/2
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
Channel List / Added
Move
Return
Channel List / Added
Enter
Delete All
CH
Page
Return
Using the Channel Lists
Displays the your desired channel list automatically when you press CH LIST button on the remote. (Choose All, Added or
Favorite)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select "Channel List", then press the
ENTER button.
Move 3.
Press the ▲ or ▼ button to select “Default List Mode” (the channel list you want to appear when you press CH LIST), then press the ENTER button.
Press the ▲ or ▼ button to select “All”, “Added” or “Favorite” then press the ENTER button.
►
►
►
►
►
►
►
►
Enter
TV
Return
Channel List
All
Added
Favorite
Default List Mode
The Channel list you have chosen will now be set.
: All
All ►
Added
Favorite
Press the EXIT button to exit.
Move Enter
Return
Alternately, press the CH LIST button on the remote control to bring up the Channel Lists.
Viewing the Channel Lists
You can display a list of all channels, added channels or your favorite channels.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select "Channel List", then press the
ENTER button.
Move 4. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
To toggle between your all channels, add channels or favorite channels,
use the P.MODE (red) button on the remote control.
• P.MODE (Red) button: Press repeatedly to select “All”, “Added” or “Favorite”
Enter
TV
3. Press the ▲ or ▼ button to select “All”, “Added” or “Favorite”, then press the
ENTER button.
Return
Channel List
All
Added
Favorite
Default List Mode
Move : All ►
Enter
Return
Channel List / All
Air 5
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Enter
1/2
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
List Mode
Move
English - 42
►
►
►
►
►
►
►
►
Delete All
CH
Page
Add All
Return
Labeling Channels
Channels can be labeled so that their call letters appear whenever the channel is selected.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Press the ▲ or ▼ button to select “Name”, then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move 2.
Press the ▲ or ▼ button to select the channel to be assigned a new name,
then press the ENTER button.
Press the ▲ or ▼ button to select a letter, a number or a blank (Results in this sequence: A...Z, 0...9, +, -, *, /, blank).
Press the ► button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the ▲ or ▼ button, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
To erase the assigned new name, select "Clear" by pressing the ◄ or ► button,
then press the ENTER button.
►
►
►
►
►
►
►
►
Enter
TV
Return
Name
Air 2
Clear
Air 3
Clear
Air 4
Clear
Air 5
Clear
Air 6
Clear
Move Enter
TV
Return
Name
▲
Press the EXIT button to exit.
Air 2
The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users.
Air 3
Clear
Air 4
Clear
Air 5
Clear
Air 6
Clear
Move Clear
A
▼
Adjust
Return
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier
boosts the incoming signal).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select “LNA”, then press the ENTER
button.
3. Press the▲ or ▼ button to select “On”, then press the ENTER button.
Press the EXIT button to exit.
Move LNA functions only when antenna is set to Air or Cable.
The LNA setting must be made separately for each channel.
If the picture is noisy with the LNA set to On, select Off.
TV
Return
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength Off
On
LNA
: On
Move English - 43
Enter
►
►
►
►
►
►
►
►
Enter
Return
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
Move Enter
Air 24
0
If you do not store the fine-tuned channel in memory, adjustments are not saved.
4. To reset the fine tuning setting, press the ▼ button to select "Reset",
then press the ENTER button.
Press the EXIT button to exit.
"*" will appear next to the name of fine-tuned channels.
Only analog TV channels can be fine tuned.
Return
Fine Tune
3. Press the ◄ or ► button to adjust the fine tuning.
To store the fine tuning setting in the TV’s memory, press the ENTER button.
►
►
►
►
►
►
►
►
Reset
Adjust Save
Return
Fine Tune
Air 24
+3
Reset
Adjust Save
Return
Fine Tune
Air 24 *
Fine Tuned
+3
Reset
Adjust Save
Return
Fine Tune
Air 24
0
Reset
Move Enter
Return
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
2.
TV
Channel
Antenna
: Air Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER
button.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
Move TV
Press the EXIT button to exit
►
►
►
►
►
►
►
►
Enter
Return
Signal Strength
OK
English - 44
Enter
Return
PC Display
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look
different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3. When the control panel window appears, click on "Display" and a display dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box,
the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
720 X 400
640 X 480
31.469
31.469
70.087
59.940
28.322
25.175
-/+
-/-
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1920 x 1080
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
79.976
66.500
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.025
60.000
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
123.000
138.500
-/-/+ /+
+ /+
+ /+
+ /+
-/-/+ /+
+ /+
-/+
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 X 350
720 X 400
640 X 480
31.469
31.469
31.469
70.086
70.087
59.940
25.175
28.322
25.175
+ /-/+
-/-
VESA
800 x 600
1024 x 768
1280 x 1024
1920 x 1080
37.879
48.364
63.981
66.587
60.317
60.000
60.020
59.934
40.000
65.000
108.000
138.500
+ /+
-/+ /+
+ /-
HDMI/DVI Input
English - 45
Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "PC", then press the ENTER button.
TV
Change to the PC mode first.
Setup
▲More
Blue Screen
: Off ►
Melody
: Medium ►
PC ►
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button.
Home Theater PC
Light Effect
: Off ►
: In Watching TV ►
Energy Saving
▼ More
Move : Off ►
Enter
Return
TV
PC
Image Lock ►
Press the EXIT button to exit.
Position ►
Auto Adjustment ►
Image Reset ►
Move Enter
Return
Auto Adjustment in Progress. Please Wait
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "PC", then press the ENTER button.
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Change to the PC mode first.
2. Press the ENTER button to select "Image Lock".
3. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Move TV
Enter
►
Return
Image Lock
Coarse
Fine
Press the EXIT button to exit.
Move Enter
▲
Coarse
▼
50
0
Return
50
Move English - 46
►
►
►
Adjust
Return
Changing the Screen Position
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "PC", then press the ENTER button.
TV
PC
Image Lock ►
Position ►
Change to the PC mode first.
Auto Adjustment ►
Image Reset ►
2. Press the ▲ or ▼ button to select "Position", then press the ENTER button.
3. Press the ▲ or ▼ button to adjust the V-Position.
Press the ◄ or ► button to adjust the H-Position.
Press the ENTER button.
Press the EXIT button to exit.
Move Enter
Return
Position
TV
▲
▲
▲
▲
Initializing the Screen Position or Color Settings
You can replace all image settings with the factory default values.
TV
Enter
Return
PC
Image Lock
Position
Auto Adjustment
Image Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "PC", then press the ENTER button.
Adjust ►
►
►
►
Change to the PC mode first.
2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER button.
Move Enter
Return
Press the EXIT button to exit.
Image Reset is completed.
Setting the Home Theater PC
This function enables you to view higher quality pictures while in PC Mode.
After setting the Home Theater PC function to On, you can go into the Detailed Settings
menu and make adjustments without affecting settings in the regular TV mode.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select “Home Theater PC”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select “On” or "Off", then press the ENTER button.
 Off: Turns off the settings for screen-related functions in PC input mode.
 On: Turns on the settings for screen-related functions in PC input mode to provide more dynamic scenes.
Press the EXIT button to exit.
This function is available only in PC mode.
English - 47
Setup
▲More
Blue Screen
: Off ►
Melody
: Medium ►
PC ►
Home Theater PC : Off ►
Light Effect
: In Watching TV ►
Energy Saving
: Off ►
▼ More
Move Enter
Return
TV
Setup
▲More
Blue Screen
: Off
Melody
: Medium
PC Home Theater PC : Off
Off
Light Effect
: InOn
Watching TV
Energy Saving
: Off
▼ More
Move Enter
Return
Time Setting
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "Time", then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
Time ►
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium
►
▼More Move Enter
Exit
2. Press the ENTER button to select "Clock".
TV
Time
--/--/----/--:-- -Clock ►
Sleep Timer
Timer 1
: Off ►
: Inactivated ►
Timer 2
Timer 3
: Inactivated ►
: Inactivated ►
3. Press the ENTER button to select “Clock Mode”.
Press the ▲ or ▼ button to select “Manual”, then press the ENTER button.
Move TV
Enter
Return
Clock
Clock Mode
: Manual
Manual
Auto
Clock Set
Time Zone
DST
: Off
Move TV
Enter
Return
Clock
Clock Mode
: Manual ►
Clock Set ►
4. Press the ▲ or ▼ button to select “Clock Set”, then press the ENTER button.
Time Zone ►
DST
: Off ►
Move TV
Return
Clock Set
Set current date and time.
5. Press the ◄ or ► button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”,
or “am/pm”. Set the date and time you want by pressing the ▲ or ▼ button,
then press the ENTER button.
Month
▲
▼
Hour
Press the EXIT button to exit.
Enter
Day
Year
Minute
am/pm
The current time will appear every time you press the INFO button.
You can set the month, day, year, hour and minute directly by pressing the
number buttons on the remote control.
Move TV
Adjust
Return
Clock Set
Set current data and time.
Month
▲
English - 48
Day
Year
1
1
2007
Hour
Minute
am/pm
12
00
am
▼
Move Adjust
Return
Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
TV
Setup
Plug & Play ►
Language
: English ►
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "Time", then press the ENTER button.
Time ►
Game Mode
: Off ►
V-Chip ►
Caption ►
2. Press the ENTER button to select "Clock".
Menu TransParency: Medium ►
▼More 3. Press the ENTER button to select “Clock Mode”.
Press the ▲ or ▼ button to select “Auto”, then press the ENTER button.
Move TV
Enter
Return
Time
--/--/----/--:-- -Clock ►
Sleep Timer
: Off ►
Timer 1
Timer 2
: Inactivated ►
: Inactivated ►
Timer 3
: Inactivated ►
Move TV
Enter
Return
Clock
Clock Mode
: Manual
►
Manual
Auto
Clock Set
►
Time Zone
DST
: Off
4. Press the ▲ or ▼ button to select “Time Zone”, then press the ENTER
button.
TV
6. Press the ▲ or ▼ button to select “DST” (Daylight Saving Time), then press the ENTER button.
Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button.
Return
Clock
Move Enter
►
►
►
►
Return
Time Zone
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Move Enter
TV
Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.
Return
Clock
Clock Mode
: Auto
Clock Set
Time Zone
DST
: Off
Press the EXIT button to exit.
Enter
Clock Mode
: Auto
Clock Set
Time Zone
DST
: Off
5. Press the ▲ or ▼ button to highlight the time zone for your local area,
then press the ENTER button.
Move ►
►
►
►
The Antenna or cable must be connected in order to set the time automatically.
Move TV
Enter
Return
Clock
Clock Mode
: Auto
Clock Set
Time Zone
On
DST
: Off
Off
English - 49
Move Enter
Return
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "Time", then press the ENTER button.
TV
Time
1/ 1/ 2007/ 12 : 00 am
Clock ►
Sleep Timer
: Off ►
2. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.
3. Press the ▲ or ▼ button to adjust “Minute”.
Timer 1
Timer 2
: Inactivated ►
: Inactivated ►
Timer 3
: Inactivated ►
Move TV
Enter
Return
Sleep Timer
Set sleep timer.
Minute
▲
4. Press the ► button to select “Activation”.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
Move TV
Activation
Off
▼
Adjust
Return
Sleep Timer
Press the EXIT button to exit.
Set sleep timer.
Minute
Activation
30
On
▲
▼
Simply press the SLEEP button on the remote control for a Quick way to access the
sleep timer setting.
English - 50
Move Adjust
Return
Setting the On/Off Timer
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "Time", then press the ENTER button.
TV
Time
1/ 1/ 2007/ 12 : 00 am
2. Press the ▲ or ▼ button to select "Timer 1, Timer 2 or Timer 3 ", then press the ENTER‑button.
Clock ►
3. Press the ▲ or ▼ button to adjust “Hour”, then press the ► button to move to the next step.
: Off ►
: Inactivated ►
Timer 2
: Inactivated ►
Timer 3
: Inactivated ►
Move Set other items using the same method as above.
Enter
Return
Timer 1
Press the ▲or▼ button
Select Once, Everyday, Mon-Fri,
Mon-Sat, Sat-Sun Sets the desired
day(s) of the week you want the TV to
turn on.
Press the ▲or▼ button
Volume
Select the desired turn on volume
level.
Press the ▲or▼ button
Contents
When the On Timer is active, you can
turn on a specific channel or play back
contents such as photo or audio files.
(Make sure that an USB device is
connected to your TV.)
Press the ▲or▼ button
▲
On Timer
12
:
00
am
Inactivate
Off Timer
12
:
00
am
Inactivate
▼
Repeat
Contents
ou can set the hour, minute and channel by pressing the number buttons on
Y
the remote control.
uto Power Off
A
When you set the timer On, the television will eventually turn off, if no controls
are operated for 3 hours after the TV was turned on by timer. This function is
only available in timer On mode and prevents overheating, which may occur if a
TV is on for too long time.
Volume
Once
TV
Move
Air
Adjust
10
3
Return
Contents
▲
Source
TV
Antenna
Air
▲
Activate or Inactivate
Repeat
Sleep Timer
Timer 1
▼
Channel
Music
None
Photo
None
Move
Adjust
3
Return
Press the EXIT button to exit.
Function Description
Selecting a Menu Language
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "Language", then press the ENTER button.
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
►
►
►
►
V-Chip
Caption
Menu TransParency: Medium
▼More
►
►
►
2. Press the ▲ or ▼ button to select “English”, “Español” or “Français”.
Press the ENTER button.
Press the EXIT button to exit.
Move TV
Enter
Return
Setup
Plug & Play
Language
: English
English
Time
Español
Game Mode
: Off
Français
V-Chip
Caption
Menu TransParency: Medium
▼More English - 51
Move Enter
Return
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off"
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select "Blue Screen", then press the ENTER button.
3. Press the ▲ or ▼ button to select "On" or "Off" then press the ENTER button.
Blue Screen
: Off ►
Melody
: Medium ►
PC ►
Home Theater PC
Light Effect
: Off ►
: In Watching TV ►
Energy Saving
▼ More
Move : Off ►
Enter
Return
TV
Setup
▲More
Blue Screen
Press the EXIT button to exit.
Setup
▲More
: Off
Off
On
: Off
Melody
Blue Screen is displayed when there is no signal from an external device,
regardless of the Blue Screen Setting.
PC Home Theater PC
Light Effect
Energy Saving
: Off
: In Watching TV
: Off
▼ More
Move Enter
Return
Using the Game Mode
When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by
selecting the game menu.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
Setup
Plug & Play ►
2. Press the ▲ or ▼ button to select "Game Mode", then press the ENTER button.
Language
: English
Time
Game Mode
: On
V-Chip
Caption
►
►
►
►
►
Menu TransParency: Medium ►
▼More 3. Select "On" or "Off" by pressing the ▲ or ▼ button, then press the ENTER button.
4. Press the EXIT button to exit.
Move TV
Restrictions on "Game mode" (Caution)
• To disconnect the game console and connect another external device, set "Game" to Off
in the setup menu.
• If you display the TV menu in "Game mode", the screen shakes slightly.
• The mark (
) appears on the screen which means that "Game Mode" is on with the
selected source.
If "Game Mode" is On
• Picture Mode is automatically changed to "Standard" and users cannot change the mode.
• Sound Mode is automatically changed to" Custom" and users cannot change the mode.
Adjust the sound using the equalizer.
• The "Reset" in the Sound menu is activated. "Reset" function initializes the "Equalizer"
settings to the factory default setting.
"Game Mode" is not available in regular TV/Antenna mode.
If the picture is poor when external device is connected to TV, check if "Game Mode" is
On. Set "Game Mode" to Off and connect external devices.
English - 52
Enter
Return
Setup
Plug & Play
Language
: English
Time
Off
Game Mode
: Off
On
V-Chip
Caption
Menu TransParency: Medium
▼More Move Enter
Return
AV1
Game Mode
Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog TV channel mode or external signal mode.
(Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
Time ►
2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button.
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More 3. Press the ENTER button to select “Caption”.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
Move TV
Enter
Return
Caption
Caption
: Off ►
Caption Mode
: Default ►
Caption Options ►
Enter
TV
Return
Caption
Caption
: Off
Off
On
Caption Mode
: Default
Caption Options
Move TV
Enter
Return
Caption
Caption
: On ►
Caption Mode
: Default ►
Caption Options ►
4. Press the ▲ or ▼ button to select “Caption Mode”, then press the ENTER button.
Press the ▲ or ▼ button to select submenu (Default, CC1~CC4 or Text1~Text4)
you want, the press the ENTER button.
Move TV
The Caption feature doesn’t work in Component, HDMI or PC modes.
The availability of captions depends on the program being broadcast.
Press
����������
the CAPTION button on the remote control to select "On" or " Off".
English - 53
Return
Caption
Caption
Caption Mode
Caption Options
Press the EXIT button to exit.
• The default is “CC1”.
• CC1: The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried in the program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language
captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are not sufficient.
Enter
Move : On
Default
CC1
: Default
CC2
: Off
CC3
CC4
Text1
Text2
Text3
Text4
Enter
Return
Viewing Closed Captions (On-Screen Text Messages) - Digital
The Digital Captions function operates on digital channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
: Off
Off
On
Caption Mode
: Default
Caption Options
3. Press the ENTER button to select “Caption”.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
4. Press the ▲ or ▼ button to select “Caption Mode”, then press the ENTER button.
Press the ▲ or ▼ button to select submenu (Default, Service1~Service6,
CC1~CC4 or Text1~Text4) you want, then press the ENTER button.
Caption
Caption
2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button.
Move TV
Caption
Caption Mode
Move TV
5. Press the ▲ or ▼ button to select “Caption Options”, then press the ENTER
button.
6.
Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
Press the ▲ or ▼ button to select the desired Caption option, then press the
ENTER button.
Press the ▲ or ▼ button to select the desired sub-menu options
(see options below), then press ENTER .
Press the EXIT button to exit.
The availability of captions depends on the program being broadcast.
“Default” means to follow the standard set by the broadcaster.
Foreground and Background cannot be set to have the same color.
Foreground Opacity and Background Opacity cannot be both set to
Transparent.
• Size: This option consists of “Default”, “Small”, “Standard” and “Large”. The default is “Standard”.
• Font Style: This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want. The default is “Style 0”.
• Foreground Color: This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta” and “Cyan”. You can change the color of the letter. The default is “White”.
• Background Color: This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta” and “Cyan”. You can change the background color of the caption. The default is “Black”.
• Foreground Opacity: This option consists of “Default”, “Transparent”, “Translucent”, “Solid” and “Flashing”. You can change the opacity of the letter.
• Background Opacity: This option consists of “Default”, “Transparent”, “Translucent”, “Solid”,and “Flashing”. You can change the background opacity of the caption.
• Return to Default: This option sets each of “Size”, “Font Style”, “Foreground Color”, “Background color”, “Foreground Opacity” and “Background Opacity” to its default.
Press
����������
the CAPTION button on the remote control to select "On" or " Off".
English - 54
: On ►
: Default ►
Enter
Return
Caption
Caption
Caption Mode
Caption Options
“Caption Options” are available only when “Service1~Service6” can be
selected in “Caption Mode”.
Service1~6 in digital caption mode may not be available depending on the broadcast.
Return
Caption Options ►
Enter
Caption
Move TV
: On
Default
Service1
: Default
Service2
: Off
Service3
Service4
Service5
Service6
▼
Enter
Return
Caption
Caption
: On ►
Caption Mode
: Default ►
Caption Options ►
TV
Move Enter
Return
Caption Options
Size
: Default
Font Style
: Default
Foreground Color : Default
Background Color : Default
Foreground Opacity: Default
Background Opacity: Default
Return to Default
Move Enter
►
►
►
►
►
►
Return
Menu Transparency Level
Adjusts the transparency of the menu screen.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
Time ►
Game Mode
: Off ►
2. Press the ▲ or ▼ button to select “Menu Transparency”, then press the ENTER
button.
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More 3. Press the ▲ or ▼ button to select level, then press the ENTER button.
Press the EXIT button to exit.
Move TV
Enter
Return
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
High
V-Chip
Medium
Caption
Low
Menu TransParency: Medium
Opaque
▼More Move Enter
Return
Using the Energy Saving Feature
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the
"Energy Saving " mode option to "High" to reduce eye fatigue as well as power consumption.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER button.
Press the EXIT button to exit.
▼ More
Move TV
►
►
►
►
►
Enter
Return
Setup
▲More
Blue Screen
: Off
Melody
: Medium
PC Off
Home Theater PC : Off
►
Low
Light Effect
: InMedium
Watching TV ►
Energy Saving
: Off
►
High
▼ More
Auto
English - 55
: Off ►
Melody
: Medium
PC Home Theater PC : Off
Light Effect
: In Watching TV
Energy Saving
: Off
Select the required option (Off, Low, Medium, High, Auto) by pressing the ▲ or ▼ button.
Press the ENTER button.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
• Auto: Automatically adjusts the brightness of the TV screen in accordance
with the scenes.
Setup
▲More
Blue Screen
Move Enter
Return
Setting the Function Help
Displays help on the menu functions.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select “Function Help”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “On”, then press the ENTER button.
Press the EXIT button to exit.
Setup
▲ More
HDMI Black Level
: Low
►
►
PIP
Function Help
: On
►
►
SW Upgrade
The predetermined value of the Function Help is On.
►
Film Mode
: Off
Wall-Mount Adjustment
Move TV
Enter
►
Return
Setup
▲ More
HDMI Black Level
Film Mode
: Low
: Off
Wall-Mount Adjustment
PIP
Off
Function Help
: On
SW UpgradeOn
Move Enter
Return
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
TV
2. Press the ▲ or ▼ button to select "Digital NR", then press the ENTER button.
3.Press the ▲ or ▼ button to select "Off", "Low", "Medium", "High", "Auto".
Press the ENTER button.
 Off: Turns the screen noise reduction function off.
 Low: Reduces screen noise at a low level.
 Medium: Reduces screen noise at a medium level.
 High: Reduces screen noise at a high level.
 Auto: Automatically recognizes and reduces screen noise.
Press the EXIT button to exit.
Picture
▲More
Color Tone
: Cool1
Detailed Settings
Size
: 16 : 9
Digital NR
: Auto
Active Color
: On
DNle
: On
▼More
Move TV
Return
Picture
▲More
Color Tone
: Cool1
Detailed Settings Off
Size
: 16Low
: 9
Digital NR
: Off
Medium
Active Color
: Off
High
DNle
: Off
Auto
▼More
Move English - 56
Enter
►
►
►
►
►
►
Enter
Return
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chip restrictions are set up or changed.
When the V-chip feature is activated, the PIP features do not function.
U.S.A Only
This product is covered by the following U.S.patents :US4,930,158,US4,930,160
Setting Up Your Personal ID Number (PIN)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Setup
Plug & Play ►
Language
: English ►
Time ►
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
The default PIN number of a new TV set is “0-0-0-0”.
▼More Move Enter
TV
Return
V-Chip
Enter PIN
*
*
*
Enter PIN
3.
The “V-Chip” screen will appear.
Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER button.
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the “Confirm new PIN” screen appears.
Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.
TV
Return
V-Chip
V-Chip Lock
: Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French Downloadable U.S. Rating
Change PIN
Press the EXIT button to exit.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2 →
4 → Power On.
*
Move Enter
TV
►
►
►
►
►
►
►
Return
Change PIN
Enter new PIN
Confirm new PIN
Enter PIN
English - 57
Return
How to Enable/Disable the V-Chip
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
Time ►
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More Move TV
Enter
Return
V-Chip
Enter PIN
*
*
*
Enter PIN
3. The “V-Chip” screen will appear.
To enable the V-Chip feature, press the ENTER button so that the “V-Chip Lock”
field is “On”. (Pressing the ▲ or ▼ button will alternate between “On” and “Off”.)
TV
*
Return
V-Chip
V-Chip Lock
: Off
►
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French Downloadable U.S. Rating
Change PIN
Press the ENTER button.
Press the EXIT button to exit.
Move Enter
TV
►
►
►
►
►
►
Return
V-Chip
V-Chip Lock
: off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move Enter
Off
On
Return
How to Set up Restrictions Using the “TV Parental Guidelines”
First, set up a personal identification number (PIN) and enable the V-Chip. (See previous section.)
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
V-Chip
Caption
Menu TransParency: Medium
▼More
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Move TV
Enter
►
►
►
►
►
►
►
Return
V-Chip
Enter PIN
*
*
Enter PIN
English - 58
*
*
Return
3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “TV Parental
Guidelines”, then press the ENTER button.
TV
V-Chip
V-Chip Lock
: On
►
TV Parental Guidelines
►
MPAA Rating
►
Canadian English
Canadian French ►
►
Downloadable U.S. Rating
►
Change PIN
Move 4. The “TV Parental Guidelines” screen will appear.
Press the ▲ or ▼ button to select one of the six aged based categories:
TV
TV
5.
At this point, one of the TV-Ratings is selected.
Press the ENTER button. Depending on your existing setup, the “ ” symbol will
be selected. (Blank = Unblocked, = Blocked)
While “ ” is selected, press the ENTER button to block or unblock the category.
To select a different TV-Rating, press the ▲ or ▼ button and then repeat the process.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings:
FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language /
S: Sexual situation / V: Violence
6.
The V-Chip will automatically block certain categories that are “more
restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will auto
matically be blocked. Similarly, if you block the TV-G category, then all the cat
egories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly.
(See next section.)
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14 or TV-MA
(See Step 4) and press the ► button. The “ ”symbol will be displayed for each sub-rating.
While “ ” is selected, press the ENTER button to go to a sub rating.
Press ENTER to block the sub rating. To select a different TV-Rating, press the
▲ or ▼ button and then repeat the process.
The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.
7. Press the EXIT button to clear all the screens. (Or proceed to the next section,
and set up additional restrictions based on the MPAA codes.)
These categories consist of two separate groups: TV-Y and TV-Y7 (young
children through age 7) and TV-G through TV-MA (everybody else).
The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV guidelines must be set up separately for each age group. (See next step.)
English - 59
Return
TV Parental Guidelines
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
• TV-Y: Young children
• TV-Y7: Children 7 and over
• TV-G: General audience
• TV-PG: Parental guidance
• TV-14: Viewers 14 and over
• TV-MA: Mature audience
►
Enter
ALL FV V S
Move L D
Enter
Allow All
Block All
Return
TV Parental Guidelines
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ALL FV V S
Move L D
Enter
Allow All
Block All
Return
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings
(either MPAA or TV-Ratings).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
Time ►
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More 3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“MPAA Rating”, then press the ENTER button.
Move Enter
TV
Return
V-Chip
Enter PIN
*
*
*
*
Enter PIN
TV
Return
V-Chip
V-Chip Lock
: On
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French Downloadable U.S. Rating
Change PIN
Move TV
Enter
►
►
►
►
►
►
►
Return
MPAA Rating
Allow All
Block All
Block
G
PG
PG-13
R
NC-17
X
NR
Move 4. The “MPAA Rating” screen will appear. Repeatedly press the ▲ or ▼ button to
select a particular MPAA category. Pressing the ▲ or ▼ button will cycle through
the MPAA categories:
• G: General audience (no restrictions).
• PG: Parental guidance suggested.
• PG-13: Parents strongly cautioned.
• R: Restricted. Children under 17 should be accompanied by an adult.
• NC-17: No children under age 17.
• X: Adults only.
• NR: Not rated.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
While a particular category is selected, press the ENTER button to activate it.
The “ ” symbol will be displayed. Press the ENTER button to block or unblock the category.
The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R”, “NC-17” and “X” will automatically be blocked also.
Press the EXIT button to exit.
English - 60
TV
Enter
Return
MPAA Rating
Allow All
Block All
Block
G
PG
PG-13
R
NC-17
X
NR
Move Enter
Return
How to Set up Restrictions Using the ‘Canadian English’
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Time ►
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More Move Enter
TV
Return
V-Chip
Enter PIN
*
*
*
*
Enter PIN
TV
3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“Canadian English”, then press the ENTER button.
Return
V-Chip
V-Chip Lock
: On
►
►
►
►
►
Change PIN
►
Move 4. Press the ▲ or ▼ button to select a appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
TV
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• C: Programming intended for children under age 8.
• C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.
• G: General programming, suitable for all audiences.
• PG: Parental Guidance.
• 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.
• 18+: Adult programming.
V-Chip will automatically block any category that is “more restrictive”.
TForhe example,
if you block G category, then PG, 14+ and 18+ will automatically
be blocked also.
English - 61
Return
Allow All
Block All
C
C8+
G
PG
14+
18+
Press the EXIT button to exit.
Enter
Canadian English
Block
” symbol is
►
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French Downloadable U.S. Rating
Move TV
Enter
Return
Canadian English
Block
Allow All
Block All
C
C8+
G
PG
14+
18+
Move Enter
Return
How to Set up Restrictions Using the ‘Canadian French’
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
Setup
Plug & Play ►
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Language
: English ►
Time ►
Game Mode
: Off ►
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More Move Enter
TV
Return
V-Chip
Enter PIN
*
*
*
*
Enter PIN
TV
3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“Canadian French”, then press the ENTER button.
Return
V-Chip
V-Chip Lock
: On
Move 4. Press the ▲ or ▼ button to select an appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
TV
” symbol is
►
►
►
►
►
►
Return
Canadian French
Block
Allow All
Block All
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• G: General
• 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own.
• 13 ans+: Programming may not be suitable for children under the age of 13.
• 16 ans+: Programming is not suitable for children under the age of 16.
• 18 ans+: Programming restricted to adults.
Enter
G
8 ans+
13 ans+
16 ans+
18 ans+
Press the EXIT button to exit.
►
TV Parental Guidelines
MAPP Rating
Canadian English
Canadian French Downloadable U.S. Rating
Change PIN
he V-Chip will automatically block any category that is “more restrictive”.
T
For example, if you block 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+
will automatically be blocked also.
English - 62
Move TV
Enter
Return
Canadian French
Block
Allow All
Block All
G
8 ans+
13 ans+
16 ans+
18 ans+
Move Enter
Return
Using the V-Chip for Digital channels
Parental restriction information can be used while watching DTV channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
TV
Setup
Plug & Play ►
Language
: English ►
Time ►
Game Mode
: Off ►
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
V-Chip ►
Caption ►
Menu TransParency: Medium ►
▼More Move TV
Enter
Return
V-Chip
Enter PIN
*
3. The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“Downloadable U.S. Rating”, then press the ENTER button.
If information is not downloaded from the broadcasting station, the Downloadable U.S. rating menu is deactivated.
Parental restriction information is automatically downloaded while watching DTV channels. It may take several seconds.
The Downloadable U.S. rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the infor
mation from the broadcasting station, it may not be available for use.
4. Press the ▲ or ▼ button to select a appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
” symbol is
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
Parental restriction levels differ depending on the broadcasting station.
The default menu name and Downloadable US rating changes depending on the downloaded information.
Even if you set the On-screen display to your desired language, the "Downloadable U.S. Rating" menu will appear in English only.
The rating will automatically block certain categories that are more restrictive.
The rating titles(For example: Humor Level..etc) and TV ratings(For example:
DH,MH,H..etc) may differ depending on the broadcasting station.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen
will go blank and the following message will appear:
1. E
nter your PIN.
To resume normal viewing, tune to a different channel using CH or CH
button. Under certain conditions (depending on the rating of the local TV
programs) the V-Chip might lock out all the channels. In this case, use the
V-Chip function for an “emergency escape”:
2. P
ress the MENU button. Press the ▲ or ▼ button to select "Setup", then
press the ENTER button.
3. P
ress the ▲ or ▼ button to select "V-Chip", then press the ENTER button.
4. E
nter your PIN, then press the ENTER button and press the ▲ or ▼ button to
temporarily disable the V-Chip Lock.
If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 : Power Off. → MUTE → 8 →
2 → 4 → Power On.
English - 63
*
*
Enter PIN
TV
Return
V-Chip
V-Chip Lock
: On
►
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French Downloadable U.S. Rating
Change PIN
Move Enter
►
►
►
►
►
►
Return
The number of
current rating title
Rating title
Press the EXIT button to exit.
*
TV
Downloadable U.S. Rating
Humor Level
41/2
DH
MH
H
VH
EH
Allow All
Block All
Move Enter
Return
The number of
all rating title
Channel Is Locked by
TV-PG [ S ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Channel Is Locked by
TV-PG [ L ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Setting the Light Effect
You can turn the LED on the front of TV on/off.
TV
Blue Screen
Home Theater PC
: Off ►
Light Effect
: In Watching TV ►
Energy Saving
: Off ►
▼ More Move Enter
Return
TV
• Off: LED will not come on.
• In Standby: Turns the LED on in standby mode.
• In Watching TV: Turns the LED on while watching TV.
• Always: LED will come on after you turn the TV off.
Setup
▲More
Blue Screen
: Off
Melody
: Medium
Off
PC
In Standby
Press the EXIT button to exit.
: Off ►
Melody
: Medium ►
PC ►
2. Press the ▲ or ▼ button to select “Light Effect”, then press the ENTER
button.
3.Press the ▲ or ▼ button to selec t “Off”, “In Standby”, “In Watching TV” or
“Always”, then press the ENTER button.
Setup
▲More
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Home Theater PC
Light Effect
: Off
In Watching TV
: Watching
AlwaysMode On
Energy Saving
: Off
▼ More Move Enter
Return
Set the Light Effect to Off to reduce power consumption.
LED
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV.
1.Insert a USB drive containing the firmware upgrade into the WISELINK port on
the side of the TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3. Press the ▲ or ▼ button to select Software upgrade, then press the ENTER button.
4. Press the ENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
When software is upgraded, video and audio settings you have made will return to
their default (factory) settings. We recommend you write down your settings so that
you can easily reset them after the upgrade.
TV Side Panel
USB Drive
TV
Setup
▲ More
HDMI Black Level
: Low
Film Mode
: Off
Wall-Mount Adjustment
PIP
Function Help
: On
SW Upgrade
Move Enter
SW Upgrade
Scanning for USB...
It may take up to 30 seconds.
English - 64
►
►
►
►
►
►
Return
WISELINK
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class
(MSC) device.
Press the POWER button on the remote control or front panel.
Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack
(USB jack) on the side of the TV.
TV Side Panel
USB Drive
If you enter the WISELINK mode with no USB device connected the message “There is no device connected” will appear.
In this case, insert the USB device, exit the screen by pressing the WISE LINK button on the remote control and enter the WISELINK screen again.
Photo and audio files must be named in English, French or Spanish. If not, the files can not be played. Change the file names to English, French,or Spanish if necessary.
The file system only supports FAT16/32 (The NTFS file system is not supported)
Certain types of USB devices may not be compatible with this TV.
Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
Recommended image resolution for Wiselink is 600 mega pixels.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem.
Only MP3 and JPEG file formats are supported.
We recommend the sequential jpeg format. Progressive jpeg uses a lot of memory and decoding may fail.
Do not disconnect the USB device while it is “loading.”
Neither PTP (Picture Transfer Protocol) nor MTP (Media Transfer Pprotocol) is supported.
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found
at the start of the file.
The higher the resolution of the image, the longer it takes to display on the screen.
If the horizontal resolution of an image is higher than 5000, it cannot be decoded.
If the vertical resolution of an image is higher than 4000, it cannot be decoded.
Using the Remote Control Button in WISELINK Menu
Button
Operations
Move the cursor and select an item
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Return to the previous menu
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Stop the current function and return to the previous high-level menu.
English - 65
Using the WISELINK Menu
1. Press the MENU button. Press the ▲ or ▼ button to select “Input”,
then press the ENTER button.
2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button.
TV
Input
Source List
: TV ►
Edit Name ►
WISELINK
Anynet+ (HDMI-CEC) Move 3. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTER button.
The WISELINK menu differs depending on the USB Memory Device
connected to TV.
Enter
Return
STORAGE DEVICE
STORAGE DEVICE
Generio
STORAGE DEVICE
STORAGE DEVICE
4. Press the ◄ or ► button to move to an icon, then press the ENTER button.
English - 66
Enter
Exit
Enter
Return
XTICK
861MB/994MB Free
To exit WISELINK mode, press the WISELINK button on the remote control.
Press the WISELINK button on the remote control to display a WISELINK menu.
Move
Move
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTER button.
• Pressing the ENTER button over a photo icon shows the currently selected photo in full screen.
• Pressing the ENTER button over a folder icon shows the JPEG files included in the folder.
To exit WISELINK mode, press the WISELINK button on the remote control.
Up Folder
Forder1
File 4
File 5
File 9
Select
Moving to a photo may take a few seconds to load the file.
At this point, the
icon will appear at the top left of the screen.
This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed.
The files are displayed on a page. 15 thumbnail photos are displayed per page.
The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
Folders are displayed first and they are followed by all JPEG files in the current
folder. The folders and JPEG files are sorted in alphabetical order.
If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.
It takes time to show JPEG files as Thumbnail images.
Photos without EXIF information may not be displayed as thumbnail images in
the PHOTO LIST depending on the picture quality and resolution.
English - 67
File 10
INFO
Option
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 11
Move
File 12
View
File 13
Return
: Folder icon
: Photo icon
: Move to the previous
folder stage icon
Selecting a Photo and Slide Show
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
3. Press the INFO button to display “Start Slide Show” or “Deselect All”.
Slide Slide
ShowShow
Start
Cancel the
Deselect
AllSelected file
INFO
Exit
4. Press the ▲ or ▼ button to select “Start Slide Show”, then press the ENTER button.
During the slide show, files are displayed in order from the currently shown file.
MP3 files can be automatically played during the Slide Show if the Default
Background Music is set to On. To enable this function, MP3 files and other
photo files must be located in the same folder on the USB Memory Device.
5. P
ress the INFO button during the slide show to set the following options
(Slide show Speed, Background Music, Background Music Setting, List).
Press the ▲ or ▼ button to select the option, then press the ENTER button.
• After setting the option press the ENTER button to make a change.
Slide show Speed
Background Music
Background Music Setting
List
INFO
English - 68
Exit
Move
Up Folder
Forder1
File 4
File 9
Enter
Return
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Using the Menu during a Slide Show
Slide Show Speed:
Select to control the slide show speed.
Fast
You can select Slow, Normal or Fast.
Slide show Speed
Background Music
Background Music Setting
List
INFO
Exit
Background Music:
Select to choose whether you want to play an MP3 file during a slide show.
OFF
You can select Music "ON" or "OFF".
Background Music Setting
Background Music Setting:
Choose file for background music
While the slide show is in progress, MP3 files and folders under the same directory
are displayed.
Select a folder using the ▲ or ▼ button and press the ENTER button.
The selected folder will be highlighted.
Press the RETURN button again to return to the slide show screen.
The selected background music is played.
Folder 01
Folder 02
Folder 03
Folder 04
Folder 05
Folder 06
◄◄ 1/1/Page ►►
Move
Enter
Return
If you turn Off the Background Music, even if the Background Music Settings have
been set up, the background music will not be played.
List:
The file information is displayed as a folder or JPEG file.
English - 69
Forder1
File 4
File 5
File 9
Select
To exit WISELINK mode, press the WISELINK button on the remote control.
Up Folder
INFO
File 10
Option
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 11
Move
File 12
View
File 13
Return
Slideshow function information icon (Displayed at the top left of the screen).
Icon
Play
Current OSD
Function
(Photo) SlideShow
Photo SlideShow is in progress.
You are able to pause a SlideShow and Music by
pressing the PLAY/PAUSE
button on the remote
control during a SlideShow.
Pause
Photo Pause
To resume the SlideShow, press the
PLAY/PAUSE
button on the remote control again.
Move to Next Photo
Pressing the (right) direction button on the remote
control allows you to move to the next photo.
Move to Previous Photo
Pressing the (left) direction button on the remote
control allows you to move to the previous photo
When selecting a photo file, the photo file information is displayed on the left side of the TV screen,
such as the resolution, the date modified and the order of the file in the current directory (e.g. 10th out of 15).
Such as the resolution
Date modified
Order of the file in the
current directory
Photo
Up Folder
Forder1
File 4
File 5
File 9
108 x 81
Dec20. 2006
4/25
Select
English - 70
INFO
File 10
Option
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 11
Move
File 12
View
File 13
Return
Rotating
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
Up Folder
Forder1
File 4
File 5
File 9
Select
INFO
4. Press the INFO button to display the option(Start Slide Show, Rotate, Zoom, List).
Press the ▲ or ▼ button to select “Rotate”, then press the ENTER button.
Press the ▲ or ▼ button to select the required option(0°, 90°, 180°, 270°), then
press the ENTER button.
To exit WISELINK mode, press the WISELINK button on the remote control.
The rotated file is not saved.
The Zoom/Slide Show option is disabled when the Rotate option is selected.
Start Slide Show
Rotate : 0°
Zoom : X1
List
INFO
Exit
The Rotating function information icon (Displayed at the top left of the screen).
Icon
Current OSD
Function
Rotating (0°)
This rotates a photo to its original position
Start Slide Show
0°
Rotate : 0°
90°
This rotates a photo by 90 degrees
Rotating (180°)
This rotates a photo by 180 degrees
Rotating (270°)
This rotates a photo by 270 degrees
English - 71
270°
List
INFO
Rotating (90°)
180°
Zoom : X1
Exit
File 10
Option
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 11
Move
File 12
View
File 13
Return
Zooming-in
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
Up Folder
Forder1
File 4
File 5
File 9
Select
INFO
4. Press the INFO button to display the option(Start Slide Show, Rotate, Zoom, List).
Press the ▲ or ▼ button to select “Zoom” , then press the ENTER button.
• Zoom(x 1): Restore the photo to its original size.
• Zoom(x 2): Zoom-in to the photo x2.
• Zoom(x 4): Zoom-in to the photo x4.
Start Slide Show
X2
Zoom : X1
X4
List
INFO
To pan up/down/left/right, press the ▲, ▼, ◄ and ► buttons.
Images with a resolution larger than 1280 X 720 are not supported.
The Rotate/Slide show option is disabled when the Zoom option is selected.
X1
Rotate : 0°
Exit
x1
To exit WISELINK mode, press the WISELINK button on the remote control.
Start
Slide Slide
ShowShow
Rotate : 0°
Zoom : X1
List
INFO
English - 72
Exit
File 10
Option
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 11
Move
File 12
View
File 13
Return
Zoom function information icon (Displayed at the top left of the screen).
Icon
Current OSD
Function
x2
Zoom (x 2)
Zoom-in to a photo x2.
x4
Zoom (x 4)
Zoom-in to a photo x4.
x1
Zoom (x 1)
Restore a photo to its original size.
Pan Down
Pan down to view the lower part of a zoomed-in
photo.
Pan Up
Pan up to view the upper part of a zoomed-in
photo.
Pan Right
Pan right to view the right side of a zoomed-in
photo.
Pan Left
Pan left to view the left side of a zoomed-in photo.
The Rotate/Slide show option is disabled when the Zoom option is selected.
English - 73
Using the MP3 List
This menu shows MP3 files from among the files saved on a USB memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Music”, then press the ENTER button.
The saved file information is displayed as a folder or file.
3. Press the ▲ or ▼ button to select a file, then press the ENTER button.
• Pressing the ENTER button over a musical note icon immediately plays the music file.
• Pressing the ENTER button over a folder icon shows the music files included in the folder.
To select a file on the next page, press the REW ◄◄ or FF ►► button to move
to the next page.
Enter
Nat King Cole-Fly me to the moon
To select all files or a file, press the INFO button to display the Music menus.
Press the ENTER button to select “Play”, “Repeat Music” or “Deselect All”.
Move
Return
00:04:00
Upper Folder
Folder 1
Play
Repeat Music
Deselect All
INFO
4. Press the PLAY/PAUSE
button while playing an MP3 file to pause the file.
Press the STOP ▄ button to exit Play mode.
001 Swan Song feat.TBNY
00:04:01
002 Beatles-Yesterday
00:04:28
003 Fall in Love
00:04:12
004 Tom Waits-Time
00:05:39
005 Chuk Mangione-Feel So good
00:04:30
006 Nat King Cole-Fly me to the moon
00:04:30
007 Ryuichi Sakamoto-Rain
00:03:54
008 Bon jovi-This ain’t a love song
00:05:25
Exit
: Folder icon
To exit WISELINK mode, press the WISELINK button on the remote control.
: Music icon
This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed,even if they are saved on the same USB device.
: Move to the previous
folder stage icon
The selected file is displayed on the top with its playing time.
To adjust the music volume, press the VOL+ or VOL- button on the remote control. To mute the sound, press the MUTE button on the remote control.
FF ►► or REW ◄◄ buttons do not function during the play.
Music function information icon (Displayed at the top left of the screen).
Icon
Current OSD
Function
(Music) All
When all music files are being played.
(Music) One
When a music file is being played.
(Music) Play/Pause
(Music) Stop
When pressing the PLAY/PAUSE
button on the
remote control while music is playing. The music
stops and the ‘Play’ text appears at the top of the
screen.
When pressing the STOP ▄ button on the remote
control when music is stopped. The music resumes
and the ‘Stop’ text appears at the top of the screen.
English - 74
Music Repeat
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Music”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
3. Press the ▲ or ▼ button to select a file, then press the ENTER button.
Move
Enter
Nat King Cole-Fly me to the moon
To select all files or a file, press the INFO button to display the Music menus.
Press the ENTER button to select “Play”, “Repeat Music” or “Deselect All”.
Return
00:04:00
Upper Folder
Folder 1
Play
Repeat Music
Deselect All
INFO
001 Swan Song feat.TBNY
00:04:01
002 Beatles-Yesterday
00:04:28
003 Fall in Love
00:04:12
004 Tom Waits-Time
00:05:39
005 Chuk Mangione-Feel So good
00:04:30
006 Nat King Cole-Fly me to the moon
00:04:30
007 Ryuichi Sakamoto-Rain
00:03:54
008 Bon jovi-This ain’t a love song
00:05:25
Exit
4. Press the ENTER button to select “Repeat Music”.
Select to repeatedly play MP3 files in the current folder.
You can select On or Off
On
• On: Plays back a music file or all music files repeatedly
Nat King Cole-Fly me to the moon
Folder 1
• Off: Doesn’t play back the music files repeatedly.
00:04:00
Upper Folder
To exit WISELINK mode, press the WISELINK button on the remote control.
Play
Repeat Music
Deselect All
INFO
English - 75
Exit
001 Swan Song feat.TBNY
00:04:01
002 Beatles-Yesterday
00:04:28
003 Fall in Love
00:04:12
004 Tom Waits-Time
00:05:39
005 Chuk Mangione-Feel So good
00:04:30
006 Nat King Cole-Fly me to the moon
00:04:30
007 Ryuichi Sakamoto-Rain
00:03:54
008 Bon jovi-This ain’t a love song
00:05:25
Using the Setup Menu
Setup displays the user settings of the WISELINK menu.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 66)
2. Press the ◄ or ► button to move to “Setup”, then press the ENTER button.
3. P
ress the ▲ or ▼ button to select an item you want, then press the
ENTER button.
Slide Show Speed
Move
Enter
Return
Enter
Return
Enter
Return
: Fast
Background Music : Off
Background Music Setting Repeat Music
: On
Screen Saver
:5 min
Move
4. Press the ▲ or ▼ button to select the option, then press the ENTER button.
Fast
: Fast
Slide Show Speed
Normal
: Off
Slow
Background Music Setting On
Background Music
Repeat Music
: On
Screen Saver
:5 min
continued...
English - 76
Move
Slide Show Speed:
Select to control the slide show speed. You can select "Fast", "Normal" or "Slow".
Slide Show Speed
Background Music
: Fast
Fast
: Off
Normal
Background Music Setting
Slow
Music Repeat
: On
Screen Saver
:5 min
Move
Move
Enter
Enter
Return
Return
Background Music :
Select to determine whether to play an MP3 file during a slide show.
You can select Music "On" or Music "Off".
Slide Show Speed
: Fast
Background Music
: Off
On
Background Music Setting
Repeat Music
Off
: On
Screen Saver
:5 min
Background Music Setting:
You can select the background music to play during a slide show. You can also
select the background music while a slide show is playing by pressing the
INFO button and selecting the “Background Music Setting” menu.
Move
Enter
Return
Background Music Setting
Choose file for background music
Folder 01
Folder 02
Folder 03
Folder 04
Folder 05
Folder 06
◄◄ 1/1/Page ►►
Select
Move
Enter
Return
Repeat Music:
Select to repeatedly play MP3 files in the current folder.
You can select "On" or "Off".
• On: Plays back a music file or all music files repeatedly.
• Off: Doesn’t play back repeatedly.
Slide Show Speed
: Fast
Background Music
: Off
Background Music Setting
Repeat Music
: On
On
Screen Saver
: Off
Off
Screen Saver:
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 1, 3 or 5 minutes.
Move
Enter
Slide Show Speed
: Fast
Background Music
: Off
Return
Background Music Setting
To exit WISELINK mode, press the WISELINK button on the remote control.
Repeat Music
: On
Screen Saver
: Off
1 min.
3 min.
5 min.
English - 77
Move
Enter
Return
About Anynet+
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your
Samsung TV’s remote.
Connecting Anynet+ Devices
The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device
has this feature, check if there is an Anynet+ logo on it.
To connect to a TV
TV
Anynet+ Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
Anynet+ Device 2
Anynet+ Device 3
Connect the [HDMI 1],
[HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT
jack of the corresponding
Anynet+ device using an
HDMI cable.
HDMI 1.3 Cable
To connect to Home Theater
TV
Anynet+ Device 1
HDMI 1.3 Cable
Anynet+ Device 2
HDMI 1.3 Cable
Anynet+ Device 3
Home Theater
Optical Cable
HDMI 1.3 Cable
1. C
onnect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using an HDMI
cable.
onnect the HDMI IN jack
2. C
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using an HDMI
cable.
HDMI 1.3 Cable
Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital Audio Input on the Home
Theater.
Connect only one Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home
Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theater, not the TV.
Please see the home theater's user manual for more information.
Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English - 78
Setting Up Anynet+
The following settings help set the Anynet+ functions.
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1. Press the Anynet+ button.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER
button.
Air28
Recevier:
On
Connect Recorder
Setup
3,
Press the ▲ or ▼ button to select "On", then press the ENTER button.
The Anynet+ (HDMI-CEC) function is enabled.
If you select Off, Anynet+ (HDMI-CEC) is disabled.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
Move
Enter
Exit
Anynet+ Setup
Anynet+ (HDMI-CEC)
: OffOff
Auto Turn Off : OffOn
Searching Connections
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
2.
Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
3.
Press the ▲ or ▼ button to select "On", then press the ENTER button.
The "Auto Turn Off" function is enabled.
If you select "Off", the "Auto Turn Off" function is canceled.
Press the EXIT button to exit.
The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set Auto Turn Off to On, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Move
Enter
Return
Anynet+ Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off : Off
Off
Searching Connections
Move
On
Enter
Return
Scanning and Switching between Anynet+ Devices
1.
Press the Anynet+ button.
Anynet+ devices connected to the TV are listed.
2.Press the ▲ or ▼ button to select to a particular device and press the ENTER button.
It is switched to the selected device.
3.If you cannot find a device you want, press the ▲ or ▼ button to select "Searching
Connections", then press the ENTER button.
The meassage "Configuring Anynet+ connection..." is displayed.
When searching devices completes, the connected devices are listed in the Anynet+
menu.
Air28
Recevier:
On
Connect Recorder
Setup
Move
Enter
Exit
Anynet+ Setup
Anynet+ (HDMI-CEC)
: On
►
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
Auto Turn Off : On
►
operation during the switching operation.
Searching Connections ►
The time required to scan for devices is determined by the number of connected
devices.
Move
Enter
Return
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the POWER
button, devices connected when the TV is already on are not displayed in the device list.
In this case, select the Searching Connections menu to search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the Anynet+ button.
English - 79
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Description
Switches from Anynet+ to TV broadcast mode.
Record
Starts a recording. (This menu works only for a device supporting recording.)
(Device_Name) Menu
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
(Device_Name) Operation
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Connect (Device_Name)
Your TV connects to the corresponding device.
Receiver
Sound is output through the receiver (home theater).
You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for
using Anynet+.
Setup
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Operating Status
Available Buttons
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Numeric buttons
▲/▼/◄/►/ENTER buttons
Color buttons
EXIT button
After switching to the device, while playing a file
◄◄ (Backward search)
►►(Forward search)
(Stop)
►  (Play/Pause)
Device with built-in Tuner
After switching to the device, when you are watching a TV
program
CH ▲/▼ button
Audio Device
When Receiver is activated
VOL +/- button
MUTE button
Anynet+ Device
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The REC button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the
TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The ◄◄, ►► operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
You can record the source streams by selecting "Record" after pressing the Anynet+ button.
Pressing the REC button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording devices users manual.
English - 80
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1.Press the Anynet+ button.
Press the ▲ or ▼ button to select "Receiver", then press the ENTER button.
2.Press the ◄ or ► button to select to "On", then press the ENTER button.
Now you can listen to sound through the receiver.
3.
Air28
Recevier:
On
Connect Recorder
Setup
Press the EXIT button to exit.
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack.
Move
Enter
Exit
When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home
theater receiver. When the source is a digital component such as a DVD and is connected to the TV
via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV.
When using the WISELINK feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the PIP and audio-related(MTS, Preferred language)
menus.
Troubleshooting for Anynet+
Symptom
Anynet+ does not work.
Solution
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
■Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
■ Connect only one receiver (home theater).
■ Check if the Anynet+ device power cord is properly connected.
■ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is Anynet+ exclusive remote control.
■ Anynet+ doesn’t work at a certain condition. (Searching channels, Operating
WISELINK)
■ When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or restart your TV.
■ Check if the Anynet+ Function of Anynet+ device is set on.
■Check if the Anynet+ device is properly connected to the TV and check if the Anynet+
I want to start Anynet+.
(HDMI-CEC) is set to On in the Anynet+ Setup menu.
■Press the TV button on the TV remote control to switch to TV. Then press the
Anynet+ button to show the Anynet+ menu and select a menu you want.
+
■Select View TV in Anynet+ menu.
I want to exit Anynet .
■Press the SOURCE button on the TV remote control and select a device other than
Anynet+ devices.
■Press any of CH, CH LIST, PRE-CH, and FAV.CH to change the TV mode.
(Note that the channel button operates only when a tuner-embedded Anynet+ device
is not connected.)
■You cannot use the remote control when you are configuring Anynet+ or switching to a
The message Connecting to
view mode.
Anynet+ device... appears on the
■Use the remote control when the Anynet+ setting or switching to view mode is
screen.
complete.
The Anynet+ device does not play. You cannot use the play function when Plug & Play is in progress.
■ Check whether or not the device supports Anynet+ functions.
The connected device is not
■Check whether or not the HDMI 1.3 cable is properly connected.
displayed.
■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
■ Search Anynet+ devices again.
■ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet+ functions.
The TV program cannot be
Check whether the antenna jack on the recording device is properly connected.
recorded.
English - 81
Appendix
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
No sound or sound is too low at
maximum volume.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD,
cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.
Check all wire connections.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable” message.
Ensure that the signal cable is firmly connected to the PC source.
“Not Supported Mode” message.
Check the maximum resolution and the frequency of the Video Adapter.
Compare these values with the data in the Display Modes.
Digital broadcasting screen
problem.
Please check the digital signal strength and input antenna.
The image is too light or too dark.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Black bars on the screen.
Make sure the broadcast you’re receiving is High Definition (HD).
HD channels sometimes broadcast Standard Definition (SD) programming, which can
cause black bars.
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or
Pink tint.
Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.
If you are using a Cable/Satellite box, you must set Closed Captioning on the box,
not your TV.
Snowy picture
Your cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on picture
This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
English - 82
Problem
Possible Solution
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and power
indicator light blinks steadily.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Image is not stable and may
appear to vibrate when you have
a computer connected to the PC
input.
If the setting is not correct, use your computer utility program to change the display settings.
Your TV supports multiscan display functions within the following frequency domain:
Horizontal frequency (kHz)
30~60
Vertical frequency (Hz)
60~75
PC Maximum refresh rate
(at 60 Hz)
1920 X 1080
Image is not centered on the
screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
The picture appears distorted in the
corner of the screen.
If Just Scan is selected with some external devices, the picture may appear distorted in the
corner of the screen. This symptom is caused by the external devices, not TV.
The TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 83
Installing the Stand
<2>
<3>
1.Place the TV face down on a soft cloth or cushion on a table.
2.Put the stand into the hole at the bottom of the TV.
3.Insert screw into the hole indicated and tighten.
Disconnecting the Stand
<2>
<3>
1.Place the TV face down on a soft cloth or cushion on a table.
2.Remove four screws from the back of the TV.
3.Separate the stand from the TV.
4.Cover the bottom hole with a cap.
English - 84
<4>
Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable (Not supplied)
Entering the menu
1.Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on a direction
button while watching your TV, use the menu to display that screen.
•P
ress the MENU butt on to display the menu. Press the ▲ or ▼ button to select
“Setup”, then press the ENTER button.
•P
ress the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the
ENTER button.
TV
Setup
▲ More
HDMI Black Level
Film Mode
►
PIP
Function Help
: On
SW Upgrade
►
►
►
Press the INFO button to reset. Press the ◄ or ► button to select “Yes”, then
press the ENTER button.
The position is initialized to the default setting.
Move Enter
Return
Wall-Mount Adjusment
3.Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
►
►
Wall-Mount Adjustment
Remembering the Position
: Low
: Off
Adjust Position Save
1 2 3
Center
INFO
4.Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Color buttons.
Save
Select a mode to Save.
5.Press the ENTER button to save.
6.Press the ENTER button.
Position1
hen Position1 is selected, the message "Current position saved as Position1" is
W
displayed.
The saved position appears on the left side of the OSD.
Position2
Position3
Adjust Enter
Return
Wall-Mount Adjusment
Moving to the remembered position
Position1
1.Complete Step 1 of “Entering the menu”.
2.Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
ou can move the wall mount to one of the 3 pre-set positions by pressing the
Y
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the positon after moving to a pre-set position, the position display will
disappear.
Adjust Position Save
1 2 3
Center
INFO
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.
his installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please
T
contact your nearest dealer.
The auto wall mount will not work when Anynet+ is operating.
English - 85
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family
LCD-TV
PDP-TV
inches
VESA Spec. (A * B)
Standard Screw
23~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(No VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
No VESA
80 ~
1400 * 800
Quantity
4
M8
4
M8
6
4
S
tandard dimensions for wall mount kits are shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
D
o not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Our 57" and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit
for this model.
Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock
English - 86
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device
has to be purchased separately. The appearance and locking method may differ from the illustration depending on the
manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
Cable
Figure 2
Figure 1
<Optional>
The location of the Kensington Lock may be different depending on its model.
1.Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2).
2.Connect the Kensington lock cable.
3.Fix the Kensington lock to a desk or a heavy stationary object.
English - 87
Specifications
Model Name
LN-T4081F
LN-T4681F
40 inches
46 inches
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W X 2
10W X 2
43.7 X 4 X 23.9 inches
(1110 x 102.8 x 607.3 mm)
43.7 X 11.4 X 26.6 inches
(1110 x 289.9 x 675.4 mm)
48.3 X 4.4 X 27 inches
(1228 x 111 x 686.8 mm)
48.3 X 12.6 X 29.6 inches
(1228 x 319.9 x 752.4 mm)
57.76 lbs (26.2 kg)
49.16 lbs (22.3 kg)
76.94 lbs (34.9 kg)
65.70 lbs (29.8 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
LN-T5281F
LN-T5781F
52 inches
57 inches
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W X 2
10W X 2
54 X 4.7 X 30.7 inches
(1372 x 120 x 779.8 mm)
54 X 12.6 X 33.3 inches
(1372 x 319.9 x 845.4 mm)
58 X 4.8 X 32.7 inches
(1474 x 121 x 830.7 mm)
58 X 13.6 X 35.3 inches
(1474 x 344.7 x 895.4 mm)
92.59 lbs (42 kg)
81.13 lbs (36.8 kg)
111.55 lbs (50.6 kg)
100.97 lbs (45.8 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With Stand
Without stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With Stand
Without stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 88
Dimensions (LN-T4081F)
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9"W
4.0
43.3
34.9
19.7
23.9
26.6
11.4
22.8
FRONT VIEW / SIDE VIEW
7.9
7.9
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2007 Samsung Electronics America, Inc.
English - 89
Dimensions (LN-T4681F)
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9"W
4.4
48.3
40.2
22.6
27.0
29.6
12.6
24.4
FRONT VIEW / SIDE VIEW
23.6
15.7
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2007 Samsung Electronics America, Inc.
English - 90
Dimensions (LN-T5281F)
(LN-T4671F)
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9"W
4.7
54
45.6
25.7
30.7
33.3
12.6
24.4
FRONT VIEW / SIDE VIEW
23.6
15.7
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2007 Samsung Electronics America, Inc.
English - 91
Dimensions (LN-T5781F)
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9"W
4.8
58.0
49.4
27.8
32.7
35.3
13.6
29.1
FRONT VIEW / SIDE VIEW
31.5
15.7
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2007 Samsung Electronics America, Inc.
English - 92
This page is intentionally
left blank.