BT 7163 Cordless Telephone User guide

BT Glide – Edition 07 – 20.01.06 – 7163

User Guide

BT Glide – Edition 07 – 20.01.06 – 7163

Welcome…

to your BT Glide Bluetooth

®

Cordless Home Phone

• Stylish slide-design phone – slide the handset open to reveal the hidden keypad.

• Large, full colour screen with icons.

• Phonebook to store up to 200 names each with home, mobile and work numbers for easy dialling.

• Answering machine with remote operation.

• Send and receive text messages using T9 ™

Input predictive text.

Text

• Bluetooth ® wireless technology lets you pair a

compatible mobile phone and Bluetooth ® headset.

• Copy contacts from your mobile SIM card to your

BT Glide phonebook.

• Caller Display lets you see who’s calling and the

50 number Calls list helps you to keep track of received calls*

• Polyphonic ringtones.

• 3 Games including Mars Lander and Solitaire.

* Requires subscription to a Caller Display service. A quarterly fee may be payable.

BT Glide – Edition 07 – 20.01.06 – 7163

This User Guide provides you with all the information you need to get the most from your phone.

You must first set up your phone before you can use it. This doesn’t take long and is easy to do. Just follow the simple instructions on the next few pages.

Got everything?

• BT Glide base

• BT Glide handset

• Battery pack (already installed)

• Mains power adaptor

• Telephone line cord

• Earpiece headset

• Wrist strap

• CD with picture/ ringtone manager

Need help?

If you have any problems setting up or using your

BT Glide, contact the Helpline on 0870 605 8047.

Alternatively, you may find the answer in ‘Help’ at the back of this guide.

Hearing aid user?

Please note that the BT Glide works by sending radio signals between the base and handset. These signals may interfere with some hearing aids, causing a humming noise.

If you have purchased a BT Glide multiple pack, you will also have the following for each additional handset:

• BT Glide charger

• Battery pack

• Mains power adaptor

• Earpiece headset

• Wrist strap

BT Glide – Edition 07 – 20.01.06 – 7163

4

In this guide

Getting started

Location . . . . . . . . . . . . . . . . . . . . 6

Setting up . . . . . . . . . . . . . . . . . . . 6

Set the time and date manually . . . 8

Getting to know your phone

Handset buttons . . . . . . . . . . . . . . 10

Base . . . . . . . . . . . . . . . . . . . . . . . 11

Standby screen and icons. . . . . . . . 12

Navigating the menus and selecting options . . . . . . . . . . . . . . 13

Handset menu. . . . . . . . . . . . . . . . 14

Using the phone

Switch handset on/off . . . . . . . . . . 15

Make a call . . . . . . . . . . . . . . . . . . 15

End a call. . . . . . . . . . . . . . . . . . . . 15

Receiving calls . . . . . . . . . . . . . . . . 15

Handsfree . . . . . . . . . . . . . . . . . . . 16

Headset socket . . . . . . . . . . . . . . . 16

Adjust earpiece/handsfree volume . 16

Secrecy . . . . . . . . . . . . . . . . . . . . . 17

Redial a number . . . . . . . . . . . . . . 17

Keypad lock. . . . . . . . . . . . . . . . . . 17

Find handsets . . . . . . . . . . . . . . . . 17

Using the phonebook

Add a new entry manually . . . . . . . 18

Dial a phonebook entry . . . . . . . . . 19

View an entry . . . . . . . . . . . . . . . . 19

Modify/edit an entry . . . . . . . . . . . 19

Delete an entry . . . . . . . . . . . . . . . 19

Delete all phonebook entries . . . . . 20

Copy the phonebook from another BT Glide handset . . . . . . . 20

If you experience any problems, please call the Helpline on 0870 605 8047

Copy entries from a SIM card . . . . . 20

Send an entry from one

BT Glide handset to another . . . . . 21

Set dialling codes. . . . . . . . . . . . . . 21

Using Bluetooth ®

Pairing a Bluetooth mobile phone . 22

Pairing a Bluetooth headset . . . . . . 23

Using your Bluetooth headset . . . . 24

Send a vCard to another

Bluetooth device . . . . . . . . . . . . . . 25

Receive a vCard . . . . . . . . . . . . . . . 25

Add entries via Phonebook

Synchronisation . . . . . . . . . . . . . . . 26

Set the synchronisation interval . . . 26

Using your BT Glide with a PC . . . . 27

Transferring images and ringtones via a PC . . . . . . . . . . . . . 28

Multiple Bluetooth devices. . . . . . . 28

Register another BT Glide handset . 29

De-register a BT Glide Handset . . . 29

Call another handset . . . . . . . . . . . 30

Transfer a call or start a 3-Way call . . 30

Using the calls list

Missed calls list . . . . . . . . . . . . . . . 31

Using the calls list . . . . . . . . . . . . . 31

Deleting Calls lists . . . . . . . . . . . . . 32

BT Calling Features

1471 . . . . . . . . . . . . . . . . . . . . . . . 33

Call Diversion . . . . . . . . . . . . . . . . 34

Call Waiting. . . . . . . . . . . . . . . . . . 34

Reminder Call . . . . . . . . . . . . . . . . 35

Change numbers . . . . . . . . . . . . . . 35

BT Glide – Edition 07 – 20.01.06 – 7163

In this guide 5

Text messaging

Subscribe to the text messaging service . . . . . . . . . . . . . 36

Cost of the fixed line service . . . . . 36

Entering text . . . . . . . . . . . . . . . . . 37

Text character map . . . . . . . . . . . . 38

Write and send a text message . . . 39

Send a text message from the phonebook . . . . . . . . . . . . . . . . . . 39

Read messages in your Inbox . . . . . 40

Use a template . . . . . . . . . . . . . . . 41

Edit or delete a template . . . . . . . . 41

Save your own template . . . . . . . . 41

Checking your Outbox . . . . . . . . . . 42

Set Sending Service Centre number . 43

Set Receiving Service Centre number . 43

Add a user area . . . . . . . . . . . . . . . 44

Edit a user area . . . . . . . . . . . . . . . 45

Delete a user area . . . . . . . . . . . . . 45

Set the font size for messages . . . . 46

Change the language for predictive text (T9™) . . . . . . . . . . . 46

Set message alert beeps on/off . . . 46

Set the first ring on/off. . . . . . . . . . 47

Using the answering machine

Switch the answer machine on/off . 48

Playing messages . . . . . . . . . . . . . 49

Delete all old messages . . . . . . . . 50

Call screening . . . . . . . . . . . . . . . . 50

Memory full . . . . . . . . . . . . . . . . . 50

Select answer mode . . . . . . . . . . . 51

Record your own OGM . . . . . . . . . 52

Play/check OGM . . . . . . . . . . . . . . 52

Answer delay . . . . . . . . . . . . . . . . . 53

Message alert on/off . . . . . . . . . . . 53

Remote access . . . . . . . . . . . . . . . 54

Switch remote access on/off . . . . . 54

Change the remote access PIN . . . 54

Operate your answering machine remotely . . . . . . . . . . . . . 55

Personalise your phone

Change the handset wallpaper . . . . 56

External ringer melody/volume. . . . 56

Internal ringer melody/volume . . . . 57

Base ringer melody/volume . . . . . . 57

Handset and base settings

Change the handset name . . . . . . . 58

Earpiece volume . . . . . . . . . . . . . . 58

Handsfree/headset volume . . . . . . 58

Auto talk on/off . . . . . . . . . . . . . . . 59

Key clicks on/off . . . . . . . . . . . . . . 59

Display language . . . . . . . . . . . . . . 59

Display contrast. . . . . . . . . . . . . . . 60

Base name . . . . . . . . . . . . . . . . . . 60

Dialling mode . . . . . . . . . . . . . . . . 60

PABX (switchboard) code . . . . . . . . 61

Restore factory (default) settings . . 61

Games

Help

. . . . . . . . . . . . . . . . . . . . . 63

. . . . . . . . . . . . . . . . . . . . . . . 66

General information . . . . . . . . . . . 70

Safety . . . . . . . . . . . . . . . . . . . . . . 70

Technical information . . . . . . . . . . 71

Switchboard compatibility . . . . . . . 71

Guarantee . . . . . . . . . . . . . . . . . . . 72


BT Glide – Edition 07 – 20.01.06 – 7163

6

Getting started

WARNING

Do not place your BT Glide in the bathroom or other humid areas.

Handset range

The BT Glide has a range of

300 metres outdoors when there is a clear line of sight between the base and the handset. Any obstruction between the base and handset will reduce the range significantly. With the base indoors and handset either indoors or outdoors, the range will normally be up to 50 metres. Thick stone walls can severely affect the range.

Signal strength

When you are out of range of the BT Glide base, you will hear a warning beep in the earpiece.

Location

You need to place your BT Glide within 2 metres of a mains power and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference.

Your BT Glide works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.

Setting up

1. Plug the mains power cable into the socket marked on the underside of the base. The Power light comes on.

Power adaptor cable

IMPORTANT

Do not connect the telephone line until the handset is fully charged for 24 hours. The base must be plugged into the mains power at all times.

Route the cable through the channel on the base.

Plug the other end of the adaptor into the wall socket and switch the power on.


BT Glide – Edition 07 – 20.01.06 – 7163

Getting started 7

2. Remove the battery guard tab from the bottom of the handset.

Battery guard tab

Battery low warning

The handset battery symbol has only one red bar left and you will hear a warning beep every

5 minutes. Start recharging your handset right away or the handset will shut down.

Battery low

Battery full

When charging, the battery symbol is blue and it scrolls.

3. Place the handset on the base to charge for at least

24 hours. The charging light comes on. The handset is pre-registered to the base as

BT Glide

. The screen shows the standby display.

The charging light stays on while the handset is being charged. Once fully charged the light will go off.

4. After 24 hours charging, plug one end of the telephone line cord into the socket marked on the base and the other end into the telephone line wall socket.

Only use the telephone line cord supplied.

When you place a handset with a completely flat battery on to the base, the charge light will come on but the handset will not start. You must wait up to

10 minutes before the battery has enough charge for the handset to start.

Telephone line cord

Battery performance

Running the battery right down at least once a week will help it last as long as possible.

On a full charge, your BT Glide handset gives you up to

7 hours talk time or up to

72 hours standby.

The charge capacity of a rechargeable battery will reduce with time as it wears out, giving the handset less talk/standby time. Eventually it will need to be replaced.

The battery and handset may become warm during charging.

This is normal.

Route the cable through the channel on the base.


BT Glide – Edition 07 – 20.01.06 – 7163

8 Getting started

Battery performance

(continued)

Only use a Li-ion rechargeable battery pack with a recommended capacity of

3.7V 1150mAh. Using an inappropriate battery will invalidate your guarantee and may damage the telephone.

Connect the wrist strap (optional)

Turn the handset over and thread the thin cord of the wrist strap through the hole on the top left corner. Then loop the thin cord over the thick strap and pull to secure.

Your BT Glide uses the 24-hour clock.

Set the time and date manually

If you have subscribed to your network’s Caller

Display service, the time will be set automatically when you receive your first call. However, this will not set the date.

1. Press the Menu option button.

2. Use the Navigation buttons to highlight the

Settings menu and press the Select option button or .

Time & Date

and press the

Select option button. The current time setting is highlighted.

4. Enter the time, eg. for 9.30pm, press 2 , 1 , 3 and 0 .

5. Press to highlight the current date setting.

Enter the date, eg. for 30 September 2005, press 3 0 / 0 9 / 0 5 .

6. Press the Save option button to confirm.

Helpline

If you are having difficulties setting up or using your BT

Glide, please call the BT Glide

Helpline on 0870 605 8047.

Your BT Glide is ready to use.


BT Glide – Edition 07 – 20.01.06 – 7163

Getting started 9

Additionally, if you have purchased a BT Glide multiple pack

For each additional handset and charger:

1. Connect the power adaptor to the charger and switch on.

2. Remove the battery guard tab as instructed on

page 7.

3. Place the handset on the charger and let the battery charge for at least 24 hours. The Charging light will come on.

Your BT Glide additional handset comes pre-registered to the base.


BT Glide – Edition 07 – 20.01.06 – 7163

10

Getting to know your phone

Handset buttons

Connection point for wrist strap , page 8

Full colour screen

Headset socket (on side of handset), page 16.

Option buttons

Select the option displayed on screen directly above the

button, page 13.

Navigation buttons

Use to move up, down, left and right around the screen,

page 13.

Talk / Handsfree

Press to answer calls.

Press again to switch between handset and

handsfree modes, page 16.

✱

Used to change the dial mode if required.

R (Recall)

For use with a switchboard.

OK

Press to confirm options displayed on the screen.

End Call / Power on/off

Press to end a call.

Press and hold to switch the

handset on/off, page 15.

Bluetooth ® button

Press to access the

Bluetooth menu, page 22.

#

Press and hold to lock/unlock

the keypad, page 17. Press

and hold to enter a pause.

Also used to switch between upper and lower case

characters, page 18.

Int

Lets you make calls between handsets registered to the

base, page 30.


Base

BT Glide – Edition 07 – 20.01.06 – 7163

Getting to know your phone 11

SIM card reader

Enables you to copy the directory from a compatible GSM mobile phone SIM card

to a handset, page 20.

Find

Press to ring a handset if you have misplaced it,

page 17.

Power light

Comes on when the mains power is

connected, page 6.

Charging light

Comes on when the handset is charging.

Once fully charged, the

light will go out, page 7.

In Use light

ON = Line in use

FLASHES = When receiving an incoming call

Message received light

Flashes when you have new messages.


BT Glide – Edition 07 – 20.01.06 – 7163

12 Getting to know your phone

Handset standby screen and icons

Handsfree on

Answering machine on

Bluetooth range indication

You have new text message(s)

You have missed calls

Menu option

Press the left-hand option button to open the main menu,

see next page.

Handset ringer off

Keypad locked

Battery status

Handset name

If you wish, the handset name

can be changed, page 58.

You have new answering machine message(s)

Date and time

Names option

Press the right-hand option button to open the phonebook.


BT Glide – Edition 07 – 20.01.06 – 7163

Getting to know your phone 13

Navigating the menus and selecting options

Your BT Glide has a handset menu system that is easy to use. The menus are shown as icons on the display. Each menu leads to a list of options, which can be seen on the following page.

1. In the bottom left of the standby screen, the Menu option is displayed. Press the option button beneath Menu to open the main menu.

2. Use the Up / Down / Left / Right navigation buttons to highlight a menu icon. The name of the highlighted menu is shown on the top line of the display.

3. To open the highlighted menu, press the Select option or press the button.

4. The options within the menu you have chosen are then displayed in a list. Use the and buttons to scroll through the list. When the option you want is highlighted, press Select or .

Press Back (if displayed) to go back to the previous screen.

Select the option displayed on screen by pressing the button underneath it.

For example, to open the main menu select Menu by pressing the option button below it, as shown.

The use the navigation buttons to scroll Up/Down/Left/Right.

To exit a menu

To exit the menu and return to standby at any time, press or close the BT Glide handset.


BT Glide – Edition 07 – 20.01.06 – 7163

14 Getting to know your phone

Handset menu

Settings (page 58)

Handset

Base

Time & Date

Network Services

Answer Machine

Text Messaging

Phonebook

Reset All Settings

Phonebook

Add Entry

Names

Search

Status

(page 18)

Mobile Synch

Copy from Handset

Copy from SIM

Delete Phonebook

Calls Lists (page 31)

Received Calls

Missed Calls

Dialled Calls

Delete Calls Lists

Bluetooth

®

(page 22)

Mobile Synch

Pair with Mobile

Send via Bluetooth

Pair Headset

Connect Headset

Disconnect Headset

Register Headset

De-Register

Text Messaging (page 36)

Write Message

Inbox

Outbox

Templates

Images & Sounds (page 56)

Melodies

Pictures

Memory Status

Games (page 63)

Mars Lander

Apples and Pears

Solitaire

Answer Machine

Play Messages

Delete Messages

Answer On/Off

(page 48)

Outgoing Message

Network Services (page 33)

Helpline Number

BT 1471

Call Diversion On

Call Diversion Off

Call Diversion Check

Call Waiting On

Call Waiting Off

Call Waiting Check

Reminder Call Set

Reminder Call Clear


BT Glide – Edition 07 – 20.01.06 – 7163

Using the phone

Switch handset on/off

1. Press and hold to switch the handset off.

2. Press again to switch the handset back on.

Make a call

1. Slide the handset open and enter the telephone number using the keypad.

Dialling numbers quickly

Numbers can be dialled direct

from the phonebook (page 19),

the Calls list (page 31) or the

redial list (page 17).

15

End a call

1. Press or slide the handset closed or place the handset back on the base.

Call timer

The call timer shows the duration of your call on your handset display.

Receiving calls

If you have subscribed to your network’s Caller

Display service, the caller’s details are displayed.

1. Press or slide the handset open to answer the call.

Or if the handset is on the base, simply lift up the handset to take the call (if auto-talk is switched on).

Auto-answer

You can answer a call just by lifting the handset off the base.

If you would rather press to receive a call when the handset is on the base, you need to

switch Auto-talk off, page 59.

Divert call to the answering machine

1. Press when the phone is ringing to divert a call to the answering machine. The call will be diverted even if the answering machine is switched off.


BT Glide – Edition 07 – 20.01.06 – 7163

16 Using the phone

To switch to handsfree during a call press .

Switch back to the handset at any time by pressing again.

Handsfree

Handsfree switches on the handset loudspeaker so you can talk to your caller without holding the handset. It also enables other people in the room to listen to both sides of your conversation.

To make a handsfree call:

1. Press twice. The display shows the icon. Your call can be heard over the handset’s loudspeaker.

2. To switch back to the handset at any time, press again.

Headset socket

1. Peel back the rubber bung on the side of the handset and plug the earpiece headset (supplied) into the socket.

2. Make and receive calls as normal.

Adjust earpiece/handsfree volume

1. During a call, press the or navigation button to raise or lower the volume. The current setting is displayed.


BT Glide – Edition 07 – 20.01.06 – 7163

Using the phone 17

Secrecy

During a call, use secrecy to talk to someone nearby without your caller hearing you.

1. During the call, press Secrecy . Your caller cannot hear you.

2. Press Off to return to your caller.

If you are using your Bluetooth headset the secrecy function will not work, it only applies to handset and handsfree usage.

Redial a number

You can redial up to 20 of the last numbers called from your handset.

1. Press to open the redial list.

2. Scroll or to highlight the number or name you want.

3. Press or press the Select option button to dial the number.

Keypad lock

1. From the standby screen, press and hold lock/unlock the keypad.

When the keypad is locked, the icon will be displayed.

to

Once the list is full, new dialled numbers replace the oldest.

If you have stored a name in the phonebook to go with the number, the name will be displayed instead, see

phonebook, page 18.

Find handsets

1. Briefly press on the base. All handsets registered to the base will ring and display

Paging

.

2. Press to stop the ringing.


BT Glide – Edition 07 – 20.01.06 – 7163

18

Using the phonebook

Each BT Glide handset can store up to 200 names along with home, mobile and work numbers.

You can store new entries in many ways:

• Adding an entry manually (see below)

• Copy phonebook from another BT Glide handset

(see page 20)

• Copy phonebook from compatible mobile phone

SIM cards (see page 20)

• Synchronise contacts with a mobile phone enabled with Bluetooth ® wireless technology (see page 26)

• Receive names and numbers (vCard) via

Bluetooth ® wireless technology (see page 25).

Names can be up to 16 characters long and numbers up to 20 digits.

Entering names

Use the keypad letters to enter names, e.g. to store TOM:

Press

Press

once to enter T.

three times to enter O.

Press once to enter M.

If you make a mistake, press

Clear to delete the last character or digit.

Press to switch between upper and lower case letters.

Press to insert a space.

You can also enter a pause in a

stored number (see page 72 for more information).

Add a new entry manually

1. Press Menu and use the Navigation buttons to highlight the Phonebook menu. Press Select or .

2.

Add Entry

is highlighted, press Select or .

3. Use the keypad to enter a contact name and any numbers for the contact.

If you subscribe to your network’s Caller Display service and want the names in your phonebook displayed instead of the phone numbers, you must store the full telephone number including the dialling code.

4. Press Save to store the new entry.


BT Glide – Edition 07 – 20.01.06 – 7163

Using the phonebook 19

Dial a phonebook entry

1. Press Names , scroll or to the person you want to call and press .

2. The display will show a list of numbers. Scroll or to the number you want to dial and press , then Select or to

Quick-search the phonebook

If you have many stored entries you can search the phonebook alphabetically. Use the keypad to enter the first letter of the name, eg. press four times to jump to names beginning with S. If there is more than one name scroll to the required entry.

View an entry

1. Press Names and scroll or to the entry you want to view and press Options .

View Entry

and press Select to view the contact’s details.

Modify/edit an entry

1. Press Names and scroll or to the entry you want to modify and press Options .

Modify Entry

and press Select .

3. Use the and buttons to move between fields and Clear to delete any incorrect characters or digits. Press Save to store the modified details.

Delete an entry

1. Press Names and scroll or to the entry you want to delete and press Options .

Delete Entry


3. The display shows

Delete Entry?

. Press Yes to delete the contact or No to return to the previous screen.


BT Glide – Edition 07 – 20.01.06 – 7163

20 Using the phonebook

Delete all phonebook entries

1. Press Menu and use the Navigation buttons to highlight the menu. Press Select or .

Delete Phonebook


Really delete all?

is displayed.

3. Press Yes to delete all contacts or No to return to the previous screen.

Both BT Glide handsets have to be registered to the same base.

Copy the phonebook from another BT Glide handset


2. Scroll to

Copy from Handset

and press Select or . A list of registered handsets is displayed.

3. Use the and buttons to select from the list of handsets displayed.

4. Press Select to begin copying.

IMPORTANT

Your BT Glide will only copy numbers stored on your SIM card. If fewer numbers than you expect copy into your BT Glide, check that all numbers are stored on your SIM and not on your mobile phone. Refer to your mobile phone user guide for instructions on how to do this.

WARNING

Keep SIM cards away from small children as they are a possible choking hazard.

Copy entries from a SIM card

You can copy the SIM directory of a compatible

GSM mobile phone to a BT Glide handset. Entries are copied one by one from the SIM card.

To be able to copy your SIM card, you must first disable the SIM card lock on your mobile phone.

Refer to your mobile phone user guide for instructions on how to do this.


BT Glide – Edition 07 – 20.01.06 – 7163

Using the phonebook 21


Copy from SIM

and press Select to begin copying.

Send an entry from one BT Glide handset to another BT Glide handset

1. Press Names and scroll or to the entry you want to send and press Options .

Send to handset

and press Select or .

A list of registered handsets is displayed.

3. Use the and buttons to select the handset you want to send the contact to.

4. Press Select to send the contact.

If the handset phonebook becomes full during copying,

Memory full is displayed and copying stops.

Set dialling codes

1. Press Menu and use the Navigation buttons to highlight the Settings menu. Press Select or .

Phonebook


3. Scroll to

Dialling codes


4. Use the and buttons to move between the text fields and enter the correct International,

Local and Country codes.

5. Press the Save option button to confirm.

For the UK, the correct dialling codes are:

International code: 00

Local code: 0

Country code: 44


BT Glide – Edition 07 – 20.01.06 – 7163

22

Using Bluetooth

®

Bluetooth ® range

Bluetooth wireless technology provides a typical range of around 10 metres from the base, although this will vary depending on your environment.

When pairing a Bluetooth headset, the distance from the base can be critical.

Some headsets need to be

0.5m away.

Your BT Glide has built-in Bluetooth ® wireless technology which makes it possible to connect your phone wirelessly with other Bluetooth devices.

You can use your BT Glide with one Bluetooth enabled mobile phone and one Bluetooth headset.

Once a mobile phone or headset is paired with your BT Glide you can:

• use your Bluetooth headset to answer calls on your

BT Glide

• copy your mobile directory to the BT Glide

• send and receive vCards with any Bluetooth device

– it does not have to be paired with the BT Glide.

IMPORTANT

Familiarise yourself with the pairing instructions before attempting this process.

IMPORTANT

Due to variations between different manufacturer’s mobile phone devices, please refer to the user guide for your specific mobile phone for exact instructions on switching

Bluetooth on and selecting a device to pair with.

Pairing

Pairing is the process for connecting two Bluetooth enabled devices together, for example a mobile phone or Bluetooth headset to your BT Glide.

You must complete the pairing procedure before the two devices can be used together. Pairing only has to be completed once for each mobile phone or Bluetooth headset.

Pairing a Bluetooth ® mobile phone

On your mobile phone:

1. Make sure your mobile is in range – i.e within 10m of the BT Glide. Following your mobile phone user guide, switch Bluetooth on and make sure your mobile phone is set to ‘visible’ or ‘discoverable’.


BT Glide – Edition 07 – 20.01.06 – 7163

Using Bluetooth ® 23

Then search for/discover other devices. Do not select BT Glide yet.

On your BT Glide:

1. Press either the Bluetooth button, or press Menu and use the Navigation buttons to highlight the

Bluetooth menu. Press Select or .

Pair with Mobile



Is Mobile Discoverable?

.

Press Yes to confirm the mobile handset is discoverable. The handset searches for and then displays a list of all visible Bluetooth ® devices.

4. Scroll or to select the mobile you want to pair with and press Select . The display returns to the previous screen.

Location of the Bluetooth button

Pairing a Bluetooth ® headset

1. Press Menu and use the Navigation buttons to highlight the Bluetooth menu. Press Select or .

Pair Headset



Make Headset Discoverable

.

4. Put your Bluetooth headset into discoverable mode. Your headset will flash.

5. On your BT Glide handset, press to confirm.

6. Enter the PIN code for your headset (will depend on your headset, eg. 0000).

7. Press to confirm. The headset is now ready for use.


BT Glide – Edition 07 – 20.01.06 – 7163

24 Using Bluetooth ®

The BT Glide secrecy function does not work whilst you are on a call using a Bluetooth headset.

You cannot transfer a call that has been answered via a

Bluetooth headset back to the

BT Glide handset.

Location of the Bluetooth button

Using your Bluetooth

®

headset

Once paired, you can use a Bluetooth headset to

receive calls via the BT Glide. (See ‘Pairing a

Bluetooth Headset’ on page 23).

When your BT Glide rings you can press the

Answer button on your Bluetooth headset to answer calls. You will have to be in a 10m range of the base, and this will vary depending on your environment

You cannot initiate calls via your Bluetooth headset, but if you have received or initiated a call via the BT Glide handset you can transfer the call to a paired Bluetooth headset.

1. Whilst in a call, press the Bluetooth button (see left). This will transfer the call to the Bluetooth headset and the BT Glide will display a Bluetooth headset symbol.

2. To transfer the call back to the Bluetooth headset, press the Bluetooth on the BT Glide and this will return the call to the handset/handsfree.


BT Glide – Edition 07 – 20.01.06 – 7163


vCards

Send a vCard to another Bluetooth ® device

1. Press Names and scroll or to the entry you want to send and press Options .

Send via Bluetooth

and press Select or . The handset searches for all visible

Bluetooth ® devices.

3. Use the and buttons to select the device you want to send the vCard to.

4. Press Select to send the vCard. Display shows

Sending Entry

. When received, your mobile will show

Business Card Received

.

vCards are ‘virtual address cards’ – these are a standard method of exchanging contact details between devices and applications.

A vCard is a phonebook entry on your BT Glide or mobile phone which can include a name and home, work and mobile numbers.

vCards can be exchanged between compatible Bluetooth

mobiles and pairing is not required for this. You cannot send vCards from a PC to the

BT Glide.

Receive a vCard


Mobile Sync


3. Scroll to

Receive Contacts


Display shows

Waiting for Entry

.

4. On your mobile, scroll to the entry you want to send and select

Send as Business Card

or

vCard

(depending on your mobile). Select

Send via

Bluetooth

. Your mobile will search for devices and find ‘BT Glide’. Select

Send

.

5. Your BT Glide will show the name of the entry sent.

Press Yes . Display shows

Entry Saved

.


BT Glide – Edition 07 – 20.01.06 – 7163


Please note

To be able to use Bluetooth ® wireless technology to add phonebook entries you will first need to ‘pair’ your BT Glide with a mobile phone which has

Bluetooth ® wireless technology, so they can be used together.

See page 22 for the ‘pairing’ procedure.

Mobiles have two lists of contacts, one on the phone in the phone book and the other on the SIM card. Mobiles differ in how they handle these two lists when Synchronising. If contacts are missed during

Synchronisation, check that they are in both lists.

Phonebook Synchronisation

Add entries from another Bluetooth ® via Phonebook Synchronisation device

Using Phonebook Sync, you can copy all phonebook entries from a mobile phone using Bluetooth ® wireless technology. You can also set your BT Glide to sync phonebooks automatically every 12 hours.

Once you have paired your BT Glide with a mobile:


Mobile Synch


3. Use the and buttons to select

All Entries

and press Select to begin synchronisation. Display shows

Synch in mobile

.

4. Your mobile might ask you for a PIN, if so enter 0000.

5. Your mobile will display

Connect with Base

.

Select Accept on your mobile.

Set the synchronisation interval

Select whether you want to initiate phonebook entry transfer manually, or automatically every 12 hours.


2. Scroll to

Phonebook


Synch Interval



Off

(for manual transfer) or

12 hours

and press Save to confirm.


BT Glide – Edition 07 – 20.01.06 – 7163


Using your BT Glide with a PC

Install the BT Glide Phone Manager from the supplied CD – this is auto-install.

The following procedure only needs to be followed the first time you use the PC upload software with your BT Glide.

First time set-up

1. Once the BT Glide Manager has been started, double-click on the Mobile Connection Manager icon on your PC’s task bar.

2. Double-click on Add connection, select Bluetooth connection, then select either Widcomm Driver

Stack or Microsoft Driver Stack depending on how your PC is configured.

3. Make the BT Glide base ‘discoverable’ by holding

down the button on the base until you hear a beep. The In Use light on the front of the base will flash indicating that the unit is discoverable.

4. Wait for the BT Glide Phone Manager to detect the

Glide base. Once detected, it will be displayed in the Active devices window. Click OK .

Once this procedure is completed, you can upload pictures and ringtones from your PC to your BT

Glide handset.

Following times you use the software

Once you have established an initial connection as described opposite, the next time you use the BT Glide Phone Manager software it will remember your

BT Glide so you do not need to make it discoverable or select which Bluetooth stack to use.

The base is usually detected quickly, but it can take a number of minutes on some occasions. If the In use light on the base stops flashing during the detection process, repeat step 3.


BT Glide – Edition 07 – 20.01.06 – 7163


You can only transfer images and ringtones to your BT Glide.

You cannot transfer vCards from a PC to the BT Glide.

Please note

You can only replace existing images and ringtones, you cannot add more.

Transfer images and ringtones from your PC to the BT Glide

1. Open the BT Glide Phone Manager and select the image or ringtone you want to transfer to your

BT Glide. You can modify the image (brightness, contrast, rotate, zoom in and out) and preview before sending. You can also preview the ringtones.

2. Press Menu on the BT Glide handset, highlight the menu and press Select

Pictures

and select a picture. Press Options , then select

Replace Picture

. Display will show

Waiting to receive picture

.

3. On the PC, click Send, a pop-up box appears offering Bluetooth devices which you can transfer to. Select BT Glide and click OK. A progress bar is displayed and the image/ringtone begins to transfer via Bluetooth.

4. A progress bar appears on the handset display.

Once complete,

Transfer successful

is displayed.

If you have multiple Bluetooth devices (eg. multiple BT Glide bases or several mobile phones) you may find it more convenient to configure the BT Glide Phone

Manager so it does not attempt to communicate with other devices.

Using Phone Manager with multiple

Bluetooth devices

1. Start the BT Glide Phone Manager, then doubleclick on the Mobile Connection Manager icon on your PC’s taskbar.

2. Right-click on the listed connection (e.g. Microsoft

XP Bluetooth connection) and select Properties.

3. De-select any devices that you do not want your

BT Glide Phone Manager to communicate with.


BT Glide – Edition 07 – 20.01.06 – 7163


Additional BT Glide handsets

Register another BT Glide handset


Register Handset


3. The display shows Press and hold the button on the base until it beeps.

4. Press and hold down the base until it beeps. button on the

5. The handset searches and displays a list of all visible Bluetooth ® devices. Scroll or to the base you want to register and press .

6. Enter the 4-digit base PIN (default PIN: 0000) and press OK to confirm. The handset is now ready for use.

De-register a BT Glide Handset


De-register Handset



De-register handset?

.

Press Yes to de-register or No to return to the previous screen.


BT Glide – Edition 07 – 20.01.06 – 7163


Internal calls

If you have two or more handsets registered to your base, you can make internal calls. Two handsets can be holding an internal call while a third handset is making an external call. You can have two handsets in conference with an external call, or transfer an external call between handsets.

Call another handset

1. Slide the handset open and press .

2. A list of registered handsets is displayed, scroll or to the handset you want to call and press

Select or .

You can put an external caller on hold, talk to another handset user, then hold a call between all three.

Transfer a call or start a 3-Way call

1. During a call, press , your caller is put on hold.

2. A list of registered handsets is displayed, scroll or to the handset you want to transfer the call to or invite to join the call and press Select or .

The called handset must press to answer.

3. When the other handset answers, you will be able to talk to the other handset and the external call will be on hold. Press Options and scroll or to:

Conference

to start the conference call;

Transfer

to transfer the call;

Switch Call

to switch between talking to the other handset and external line.


BT Glide – Edition 07 – 20.01.06 – 7163


The calls list stores up to 50 entries containing received and missed calls. The list is shared between all handsets registered to the base. When the Calls list is full, new calls automatically replace the oldest calls.

The calls list uses Caller Display information.

Caller Display shows who is calling before you answer the phone and also the name if stored in the phonebook.

To use Caller Display and make the most of the calls list feature you must first subscribe to your network provider’s Caller

Display service. A quarterly fee may be payable.

For more details on BT’s Calling

Features, including BT Caller

Display, call BT free on 0800

800 150.

Missed calls list

If you are away from your phone and miss a call, the handset will display the icon showing the number of missed calls you have received.

1. Press Read to see the list of missed calls.

Or, press Back to return to the standby screen.

The icon will be displayed to remind you that you have missed calls in the calls list.

Caller information

With some incoming calls, the telephone number of the caller is not available and cannot therefore be displayed. In this case your BT Glide provides you with some explanatory information.

Unavail – The number is unavailable.

Withheld – The caller has withheld their number.


1. Press Menu , use the Navigation buttons to highlight the Calls List menu and press Select or .

2. You can view your calls by category: Received Calls,

Missed Calls, or Dialled Calls. Press or to highlight the list you want view and press Select .

3. Use and to scroll through the list. When viewing an entry, press Options to access any of the following options:

Call

– to call the number.

Display can show numbers up to 20 digits and names up to

16 characters.


31

32 Using the calls list

BT Glide – Edition 07 – 20.01.06 – 7163

Save

– to save to phonebook.

Send a Message

– to send a text message to the

number (see page 36 for more information).

Details

– to view the number, time and date and duration of the call.

Delete

– to delete the entry.

4. Scroll to the required option and press Select or .

Deleting Calls lists

1. Press Menu , use the Navigation buttons to highlight the Calls List menu and press Select or .

Delete Calls Lists


3. Use and to highlight the list you want to delete or highlight

Delete All Lists

to delete all

3 lists. Press Delete .


Are you sure?

. Press Yes to delete the selected list or press No to return to the previous screen.


BT Glide – Edition 07 – 20.01.06 – 7163

BT Calling Features

Your BT Glide has a range of pre-stored numbers in the Calling Features sub-menu to help you take advantage of BT services. These are:

• Helpline number

• BT 1471

• Call Diversion On

• Call Diversion Off

• Call Diversion Check

•

•

Call Waiting On

Call Waiting Off

• Call Waiting Check

• Reminder Call Set

• Reminder Call Clear

The Calling Features menu works in the same way as the main phonebook and can store up to 10 entries.

Or if you prefer, you can delete the pre-stored entries and replace them with your own numbers.

Many of these Calling Features require subscription from your network provider and in most cases a quarterly fee is payable.

For more details on BT’s Calling

Features call BT free on 0800

800 150.

Check with your network provider for details. For further information, see the BT Calling

Features User Guide supplied when you subscribe to the services of your choice.

Helpline

1. Press Menu , use the Navigation buttons to highlight the Network Services menu and press Select or .

2. Display will show

Helpline

, press Select to dial the

BT Glide Helpline number.

1471


1471

and press Dial .

1471 lets you hear an announcement giving details about your last caller.

33


BT Glide – Edition 07 – 20.01.06 – 7163

34 BT Calling Features

You can set incoming calls to be diverted to another number where you can be reached.

Call Diversion


2. Scroll to one of the following options:

Call Diversion On

– set the phone number and switch the service on.

Call Diversion Off

– switch the service off.

Call Diversion Check

– to hear the number you have set your calls to be diverted to.

3. Press Dial or . The Call Diversion code you have selected is dialled. Listen to the announcement and follow the instructions given.

Call Waiting lets you know if another person is trying to contact you while you are on a call. If a second caller rings you will hear a beep in the handset.

Providing you have Caller

Display, the screen will show the caller’s details.

IMPORTANT

If your phone is connected to the same line as your computer, you should turn Call

Waiting off before going on line to prevent data corruption.

Call Waiting



Call Waiting On

Call Waiting Off

Call Waiting Check

– to check if the service is switched on or off.

3. Press Dial or . The Call Waiting code you have selected is dialled. Listen to the announcement and follow the instructions given.


BT Glide – Edition 07 – 20.01.06 – 7163

BT Calling Features 35

Reminder Call



Reminder Call Set

Reminder Call Clear

Reminder Call Check

3. Press Dial or . The Reminder Call code you have selected is dialled. Listen to the announcement and follow the instructions given.

You can set your phone to ring at a specific time, for example, to remind you of an appointment.

Change numbers


2. Scroll to

Network Services


Dialled Services


4. Scroll or to the number you want to edit and press Select or .

5. Press Clear to delete the current service number and use the keypad to enter a new one.

6. Press Save to confirm.

You can change the numbers stored in the Calling Features menu, for example to your networks’ equivalent codes or different numbers altogether.

Please note, however, that you cannot change the headings.


BT Glide – Edition 07 – 20.01.06 – 7163

36

Text messaging

IMPORTANT

You must subscribe to your

Network Provider’s Caller

Display service so that you can use text messaging. A quarterly fee may be payable, please contact your network provider for more details.

When you are using text messaging you must not withhold your telephone number or the service will not allow you to connect.

Messages to non-compatible phones

You may also send messages to landline phones that are NOT

TEXT compatible. Messages to non-compatible lines will be connected to voice text and delivered in spoken words to the telephone as a call. Please note that the conversion can translate common abbreviations and emoticons etc, but to ensure maximum clarity of message delivery, abbreviations etc should be used sparingly.

WARNING

The text feature will not work properly if you have more than one text product connected to your telephone line. You will need to disconnect one text product.

Welcome to the BT Text Service on your BT Glide.

The service is provided by BT. Your BT Glide can send and receive text messages from participating mobile networks and compatible landline telephones in the UK.

The fixed line Text service is provided under BT’s terms and conditions for telephone service. These can be found by visiting the BT.com website at: http://www.bt.com/terms/tor.htm

Subscribe to the text messaging service

When you send your first text message from your

BT Glide you will automatically be registered for the service.

On receipt of your first text through the service, the system will send you a welcome text message back.

You may also register by sending the word

‘Register’ to 00000 upon which you will receive a confirmation message.

Introduction to fixed line text messaging, including details of where to find more information on the web at http://www.bt.com/terms/tor.htm

Cost of the fixed line service

There is no subscription charge (other than the subscription to Caller Display). Visit the BT website

(www.bt.com) to find out how much it costs to send a text message (depends upon your call package).


BT Glide – Edition 07 – 20.01.06 – 7163

Text messaging 37

Writing and sending text messages

Entering text

There are 2 text entry modes on your BT Glide,

standard and predictive. The text entry mode is shown in the top right of the display. To switch between the two text entry modes when writing a text message, press .

A single text can be up to 160 characters.

The number of characters still available to use is shown in the top of the display, as you enter each character.

If you wish, you change the font size of your text

message (see page 46).

Standard text

Enter characters by pressing the relevant button on the keypad the correct number of times.

For example, to enter the letter ‘h’ press

The character is inserted and the cursor automatically moves on to the next space after a couple of seconds.

twice.

All handsets use the same Inbox,

Outbox and Drafts folder.

Writing tips for standard text entry


Clear to delete the last character or digit to the left of the cursor. To clear all text, press Options , scroll down to

Clear text and press Select .

When writing a text message:

Use the navigation buttons to move the cursor.

Press

Press to insert a space.

to insert punctuation.

Press to switch between upper and lower case.

Press and hold for a second

to enter numbers. Press and hold again to return to upper and lower case.

To insert symbols and emoticons, press Options and scroll down to the appropriate option, or

press and hold .


BT Glide – Edition 07 – 20.01.06 – 7163

38 Text messaging

UPPER and lower case

Press to switch between upper and lower case and to change between predictive and normal text modes when writing a text message.

Text character map

Button UPPER case Lower space space

. , : ; ! ? ¡ ¿ ‘ “ 1

A B C 2

D E F 3

G H I 4

. , : ; ! ? ¡ ¿ ‘ “ 1 a b c 2 d e f 3 g h i 4

J K L 5

M N O 6

P Q R S 7

T U V 8 j k l 5 m n o 6 p q r s 7 t u v 8

W X Y Z 9 w x y z 9

Press and hold to see characters

Writing tips for predictive text entry


Clear to delete the last character or digit to the left of the cursor. To clear all text, press Options , scroll down to

Clear text and press Select .

Press to insert punctuation.

To change the font size, see

page 46.

Predictive text entry (T9 ™ )

For quick texting you can use predictive T9 ™ Text

Input. Press the button showing the letter you want once and your BT Glide predicts what you want to write. For example, to write the word

‘Hello’, press , , , , .

If the word you want is not displayed and there are alternative words available based on the characters you have entered, the text will be shown in inverse video, press repeatedly to display the alternative words.

If your BT Glide cannot find a word based on the characters you have entered, press and use standard text entry to spell the word out, then press OK .


BT Glide – Edition 07 – 20.01.06 – 7163


Write and send a text message

1. Press Menu , use the Navigation buttons to highlight the Text Messaging menu and press Select or .

Write Message


3. Use the keypad to write your message using standard text input, or use the predictive predictive T9 ™ Text Input (see page 38).

4. To send the message, press Options , scroll to

Send and press Select . Either enter the phone number, or press Search to display the phonebook then scroll to the entry you want using the navigation buttons.

5. Now press Send . Display shows

Sending Message

.

Sent messages are stored in your Outbox (see

page 42). The newest message replace the oldest.

During text input, press and hold at any time to switch between standard and predictive text input.

Send a text message from the phonebook

1. Press Names and scroll and to the contact you want to send a message to and press Options .

Send a SMS


If there is more than one User Area, scroll and to select the user area you want and press OK .

3.

Write Message

is displayed. Press Select write your message.

4. When finished, press Options

Send

and press Select to send the message.

If the User Area is PIN protected, you may be required to enter a 4 digit PIN code.

For more information on

User Areas, see page 44.


BT Glide – Edition 07 – 20.01.06 – 7163


IMPORTANT

You will not be able to receive text messages until you have first sent a message. The first sent message registers you with the text service.

The text feature will not work properly if you have more than one text product connected to your telephone line. You will need to disconnect one text product.

Reading text messages

Received messages are stored in the Inbox. Up to a total of 50 messages can be stored in the Inbox.

When the Text memory is full, the display shows

Memory Full

.

When you receive a text message, the icon will be displayed showing the number of messages received. Press Read to go directly to the Inbox and read the message.

Read messages in your Inbox


Inbox


3. Use and to select the message you want to read and press Read .

When reading your messages, press Options to access the following options:

Reply

– write and send a reply.

Forward

– forward the message to another number.

Delete

– delete the message.

Call Number

– call the sender.

Save Number

– save the number to the phonebook.

Delete All

– delete all messages.


BT Glide – Edition 07 – 20.01.06 – 7163


Using text message templates

Your BT Glide has pre-set message templates you can use to save time writing common or repetitive messages, for example ‘Meet me at’ or ‘I’m at work’.

Use a template

1. Start a new text message and press Options .

Then scroll to

Insert Template


2. Choose a template from the list and press Select .

The template text is inserted into your message.

Edit or delete a template


2. Scroll to

Templates


3. Use and to select the template you want to edit or delete and press Select .

4. Either scroll to

Edit Template


Then use the keypad to enter the new template text and press Save to confirm.

Or, scroll to

Delete Template


Press Yes to delete the template or No to return to the previous screen.

Save your own template

1. Write your text message and press Options . Then

Save as Template


You can overwrite the existing templates with your own, up to

160 characters long.


BT Glide – Edition 07 – 20.01.06 – 7163


Message storage

The BT Glide can store 50 messages. These are shared between the Inbox, Outbox and Templates.

If you leave old messages in the

Outbox or Inbox, eventually there will be no memory available for new messages and you will not be able to send and receive messages. The memory is shared between all of the users. Delete read and unwanted messages to keep memory storage free.

Checking your Outbox

Your BT Glide’s outbox is like a redial list. It holds a copy of the message you send. Each message has details of the time and date it was sent.

You must delete unwanted messages from your

Outbox regularly to make sure there is enough memory for new messages.


Outbox


3. Use and to select the message you want to read and press Read .

When reading your messages, press Options to access the following options:

Forward

– to forward the message to another number.

Delete

– to delete the message.

Call Number

– to call the sender.

Save Number

– to save the number to the phonebook (if the number is already stored, this option is not displayed)

Delete All

– to delete all messages.


BT Glide – Edition 07 – 20.01.06 – 7163


Service Centre numbers

To send and receive text messages you need the telephone number of your Network’s SMS Centre.

If you accidentally delete the Send or Receive

Service Centre numbers you will need to re-enter them in order for your text Service to work.

Set Sending Service Centre number

1. Press Menu , use the Navigation buttons to highlight the Settings menu and press Select or .

Text Messaging


Send Centre


4. Enter the Sending Centre Number 1470P1709400 and press Save to confirm.

Set Receiving Service Centre number


Text Messaging


3. Scroll to

Receive Centre


5. Enter the Receiving Centre Number 080058752 and press Save to confirm.


BT Glide – Edition 07 – 20.01.06 – 7163


The default user area is 9. In this user area all text messages are available to every user.

If you set up a user area, you must tell people sending you text messages to add your onedigit user area number to the end of your phone number, otherwise their message will be stored in the general Inbox

(user area 9) rather than in your personal Inbox.

User areas

Your BT Glide is pre-set to make all text messages available to every user. However, to keep your messages private, you can set up to 9 PIN protected user areas.

Each personal user area has its own Inbox and

Outbox folder which are only accessible when the correct PIN is entered.

Add a user area


Text Messaging


Users


New User

is displayed, press Select to add a new user.

Terminal Number

.

5. Use and to select a user number (0 – 8) and press Select .

Protection

.

7. Press the and button to select either

Off

or

On

.

If you selected On, scroll and select

PIN

, then enter a 4 digit PIN to protect your Inbox and press

Save to confirm.


BT Glide – Edition 07 – 20.01.06 – 7163


Edit a user area


Text Messaging


Users


4. Use and to select the user you want to edit and press Select .

Edit

and press Select . Then use and to move between fields and enter the correct

Name, Terminal number, Protection and PIN using the keypad.

6. Press Save to confirm the settings.

Delete a user area


Text Messaging


Users


4. Use and to select the user you want to delete and press Select .

5. Scroll to

Delete

and press Select . Display shows

Enter PIN

. Enter your PIN and press Select or .


Really delete?

. Press Yes to delete the user or No to return to the previous screen.


BT Glide – Edition 07 – 20.01.06 – 7163


Text message settings

Set the font size for messages


Text Messaging


Options


Font size



Small

or

Large


The languages you can choose from are: English, Français

(French), Deutsch (German),

Italiano (Italian) or Español

(Spanish).

Change the language for predictive text (T9 ™ )


Text Messaging


3. Scroll to

Options


T9 Language


5. Use the and buttons to select your preferred language and press Save to confirm.

Set message alert beeps on/off


Text Messaging


3. Scroll to

Options



BT Glide – Edition 07 – 20.01.06 – 7163


Message Alert



On

or

Off


Set the first ring on/off


Text Messaging


Options


First Ring



On

or

Off


The default First Ring setting is ON.

With some connections to the public telephone network, you may experience a short burst of ringtone when receiving a text message. If you want to stop this happening, you can change the First Ring setting to OFF.


BT Glide – Edition 07 – 20.01.06 – 7163

48

Using the answering machine

Each message can be up to 3 minutes long.

Your BT Glide comes with two pre-recorded outgoing messages, one for Answer and

Record mode and one for

Answer Only mode.

You can also record your own outgoing message. See

‘Outgoing message (OGM)’ on

page 51 for more information.

Your BT Glide can digitally record up to 15 minutes of messages. You can also record memos for other users of your phone.

You control your answering machine and listen to your messages with the handset. You can also access your answering machine remotely from any external Touchtone ™ telephone (see page 54).

Your BT Glide gives clear voice prompts to help you when using the answering machine.

When first switched on, your BT Glide answering machine is ready to go. It is set to answer calls and record messages. If you have not already set the day and time, you will need to do this so that you

will know when each message was received, see

page 8.

Switch the answer machine on/off

When the answering machine is switched on, the icon is displayed.

1. Press Menu , use the Navigation buttons to highlight the Answer Machine menu and press Select or .

Answer On/Off


On

or

Off

and press



BT Glide – Edition 07 – 20.01.06 – 7163

Using the answering machine 49

Listening to your messages

When you have received new answering machine messages, the handset will display the icon showing the number of messages received.

Also, the message light on the base will flash if a answering machine message, or text, is received.

Playing messages

1. Press Menu , use the Navigation buttons to highlight the menu and press Select or .

Play Messages


The machine announces, “You have X new

messages”, and your new messages are played back.

The machine then announces, “You have X old

messages”, and any old messages are played back.

New messages will always be played back first.

During playback, you can choose any of the following:

Adjust the volume – Press to increase or to decrease the message playback volume.

Pause playback – Press Pause . Press again to resume playback.

Skip backward – Press to replay the current message. Press twice to play the previous message.

Skip forward – Press to skip to the next message.

Delete current message – Press Delete .

Stop playback – Press .


BT Glide – Edition 07 – 20.01.06 – 7163

50 Using the answering machine

You cannot delete new messages. You will need to listen to your messages before you can delete them.

Delete all old messages


Delete Messages



Delete All Old Messages?

.

Press Yes to delete all old messages or No to cancel and return to the previous screen.

Call screening

When the answering machine is taking a call, you can listen in to your caller leaving a message and decide if you want to take the call in person.

1. Press the Listen option button.

2. Press Talk if you want to speak to the caller and recording will stop immediately.

Memory full

If there is insufficient memory left to leave a message, your answering machine will automatically switch to

Answer Only mode. You must delete messages to allow for more messages to be recorded, see above.


BT Glide – Edition 07 – 20.01.06 – 7163

Outgoing message (OGM)

This is the message your caller hears when the answering machine picks up their call. Your BT

Glide comes with two pre-recorded outgoing messages to choose from. You can also record your own outgoing messages.

Answer and record

This allows your caller to leave a message for you.

The pre-recorded message is, “Hello, your call cannot be taken at the moment, so please leave your message after the tone.”

Answer only

This does not allow your caller to leave a message.

The pre-recorded message is, “Hello, your call cannot be taken at the moment, and you cannot leave a message, so please call later.”

Select answer mode


2. Scroll to

Answer Machine


3. Scroll to

Answer Mode


4. Press or to select either

Answer & Record

or

Answer Only




BT Glide – Edition 07 – 20.01.06 – 7163


Your Answer and Record message can be up to 3 minutes and the Answer Only message up to 15 minutes.

It replaces the pre-recorded outgoing message, but you can reinstate this later if you wish.

Record your own outgoing message


Outgoing Message


Record Message


Answer Only


Answer & Record

or

5. After the beep, speak your message clearly, close to the phone. When you have finished recording, press

Save . Your message is played back for checking.

Play/check outgoing message


Outgoing Message


3. Scroll to

Play Message


Answer & Record

or

Answer Only

and press Select . The selected OGM is played back to you.

5. Press OK when the OGM has finished playing.


BT Glide – Edition 07 – 20.01.06 – 7163


Answer delay

Answer delay sets the number of times your

BT Glide will ring before the answering machine picks up your call. The default setting is 6 rings.

You can change this setting to 2 – 9 rings.


Answer Machine


Answer Delay


4. Use the and buttons to choose between 2 to

9 rings, then press Save to confirm.

Message alert on/off


Answer Machine


Message Alert


Off

or

On

and press


With the message alert set to

On, when you have new messages stored on your answering machine you will hear beeps to alert you.


BT Glide – Edition 07 – 20.01.06 – 7163


IMPORTANT

It is recommended that you change the security PIN to a

4-digit code of your own for security reasons (see below).

Remote access

You can operate your answering machine remotely from any Touchtone ™ phone by calling your BT Glide and entering a 4-digit security code. The pre-set code is 0000.

Switch remote access on/off

In order to remotely access your answering machine, you will need to switch remote access on.


Answer Machine


3. Scroll to

Remote Access


Off

or

On

and press


To prevent unauthorised access to your answering machine it is recommended that you change the PIN code from the original setting 0000.

Keep a note of your remote access PIN code by writing it in

the space provided on page 73.

Change the remote access PIN code


2. Scroll to

Answer Machine


Security Code


4. Enter the 4-digit PIN code you want to use and press Save .


BT Glide – Edition 07 – 20.01.06 – 7163


Operate your answering machine remotely

1. Dial your BT Glide phone number and when the

OGM starts to play, press the ✱ button.

2. The answering machine announces “Please enter

your security code”. Enter your 4-digit security code

(default setting: 0000).

3. You have now accessed your answering machine and you can operate it using the keypad buttons on the phone you are using.

The commands are:

2 To play all messages

3 To play new messages

4 To skip backwards through messages

5 To delete the current message

6 To skip forwards through messages

7 To set the answer mode

8 To play/check the OGM

9 To record a new OGM

0 To switch the answering machine on/off

Incorrect PIN

If you enter the incorrect PIN

code, you will hear “Incorrect

security code”. You have two chances to enter the correct remote access security code before your BT Glide hangs up.


BT Glide – Edition 07 – 20.01.06 – 7163

56

Personalise your phone

You can change the available pictures and ringtones using

BT Glide Phone Manager, see

page 28.

Use the options in the Images & Sounds and

Settings menus to change your BT Glide’s handset wallpaper, ringer melodies and ringer volumes.

Change the handset wallpaper

1. From the Images & Sounds menu, scroll to

Pictures


2. Scroll to the picture you wish to use and press

Options .

Use as a wallpaper


External ringer melody


Melodies


2. Press or to select a melody and press Options .

3. Scroll to

Use for Ext Call


Select OFF if you do not want to be disturbed. The will be displayed to remind you that the ringer is off.

External ringer volume

1. From the Settings menu, scroll to

Handset


Ext. Ringer Volume

.

3. Press or to select a select from 5 volume levels or Off and press Save .


BT Glide – Edition 07 – 20.01.06 – 7163

Personalise your phone 57

Internal ringer melody


Melodies


2. Press or to select a melody and press Options .

3. Scroll to

Use for intercom


Internal ringer volume

1. From the Settings menu, scroll to and press Select .

Handset

Int Ringer Volume

.


Base ringtone

1. From the press Select .

Settings menu, scroll to

Base

and

Ringtone

.

3. Press or to select a ringtone and press Save .

Select OFF if you do not want to be disturbed.

Base ringer volume

1. From the press Select .

Settings menu, scroll to

Base

and

2. Scroll to

Ringer Volume

.



BT Glide – Edition 07 – 20.01.06 – 7163

58

Handset and base settings

If you have more than one BT

Glide handset, you can set a name for each handset, for example, David or Kitchen.

Use the Settings menu to change your

BT Glide’s handset and base settings such as the handset name, display contrast etc.


Handset settings

Change the handset name

1. From the menu, scroll to

Handset


Name

.

3. Enter the handset name you want using the keypad then press Save to confirm.

Earpiece volume


Handset


Earpiece Volume

.

3. Press or to select a select from 5 volume levels press Save .

Handsfree or headset volume


Handset


2. Scroll to

Handsfree Volume

or

Headset Volume

.


BT Glide – Edition 07 – 20.01.06 – 7163

Handset and base settings 59

3. Press or to select a select from 5 volume levels and press Save .

Auto talk on/off


Handset


Auto Talk

.

On

or

Off

and press


Key clicks on/off


Handset


Key Click

.

On

or

Off

and press


Display language


Handset


Language

.

3. Press or to select your preferred language and press Save to confirm.

The display languages you can choose from are: English,

Français (French), Deutsch

(German), Italiano (Italian),

Español (Spanish), Nederlands

(Dutch) and Português

(Portuguese).


BT Glide – Edition 07 – 20.01.06 – 7163

60 Handset and base settings

Display contrast


Handset


Display Contrast

.

3. Press or to select a select from 5 contrast levels and press View .

4. Scroll and to change the setting, then press

OK followed by Save .

Base settings

Base name


Base

and press

Select .

Base Name

.

3. Enter a name for the base using the keypad and press Save to confirm.

Dialling mode


Base

and press

Select .

Dial Mode

.

3. Press or to select a either

Pulse

or

Tone



BT Glide – Edition 07 – 20.01.06 – 7163

PABX (switchboard) code


Base

and press

Select .

PABX Status

.

On

or

Off

.

4. If you selected On: scroll to

PABX Code

and enter the one digit PABX code. Press Save to confirm.

Restore factory (default) settings

1. From the Settings menu, scroll to

Reset all

Settings



Reset Settings? System will

Reset

.

3. Press Yes to confirm the reset or No to return to the previous screen.

After resetting, all settings will be restored to their

factory settings (see page 62). The phonebook, calls list, answering machine and text messages will be saved. Pictures and ringtones will not be restored.

Handset and base settings 61


BT Glide – Edition 07 – 20.01.06 – 7163

62 Handset and base settings

Default settings

PIN code

Base volume

0000 level 5

Handset internal ringer volume level 5

Handset external ringer volume level 5

Handset name

Earpiece volume

Language

Handsfree volume

BT Glide level 3

English level 3

Headset volume

Display contrast

Key beeps

Auto talk level 3 level 3

On

On


BT Glide – Edition 07 – 20.01.06 – 7163

Games

Use the Games menu to access the three built-in games on your BT Glide.

1. Press Menu , use the Navigation buttons to highlight the menu and press

Select or .

2. Press to the game you want to play and press Select . Follow the instructions shown for the relevant game:

Mars Lander

The player has to land a space probe falling to the surface of the planet, at the start a ‘far away’ view is seen where the landing sights are shown as green dots and there is very little detail of the surface (1/10th of the final landing stage) as the probe falls and reaches the bottom part of the screen the game pauses and the camera ‘zooms’ in to a closer view showing more detail of the ground and the actual landing pad.

The player needs to press to fire his retro engines in short bursts and press and to move the Lander left or right, both of these actions burns fuel and the player has only a limited supply, use it up too soon and the craft will fall too fast at the latter stages, use too little and the craft will be falling too quickly to slow down at the end.

This is played against a clock and the best times and fuel usage is scored (also based on the hardness of the landing sight).

To exit the game, press then scroll

Exit

and press OK .

63


BT Glide – Edition 07 – 20.01.06 – 7163

64 Games

Apples & Pears

The player is presented with a board filled with different types of fruit.

The objective is to get 3, 4 or 5 fruits in a row, horizontally or vertically, the more fruits the higher the score.

Use the navigation buttons to move the cursor around and highlight a fruit and press to select it. A second cursor will then appear which can be moved in the same way. Highlighting and selecting an adjacent fruit with this second cursor will switch the two.

When 3, 4 or 5 fruits are in a row then they will disappear, the score is added to the total and new fruits fall in to fill the slots.

A target score is presented for each level and when the player reaches that target the board is cleared and a new level starts with one extra type of fruit.

The game starts with 4 fruits and progresses up to 10 fruits.

The game ends when the timer runs out (the time is reset at the start of each level).

Solitaire

This is an implementation of the classic card game. The player is presented with a pack of cards face down, the top card is face up, there are 7 columns of cards, the first with only one card, the second with 2, the third with 3 and so on. There are 4 empty piles across the screen where the player can place an Ace if available.

The objective is to place the next card in the sequence on top of the last card on a pile in alternate colours (e.g. red, black, red, black, etc.) and going down in numeric value (King to Ace). From these piles the player must slowly build up the four empty piles with a sequence of cards in a particular ‘suit’, Hearts,

Diamonds, Clubs or Spades starting with Ace, 1, 2, 3 and so on. Finally ending up with only four piles of the same suit cards in number order.


BT Glide – Edition 07 – 20.01.06 – 7163

Games 65

Use the navigation button to move the cards around the screen.

On the 7 piles:

1. The next card must not be the same colour as the previous card.

2. The next card must be the next lower number.

3. The player can drag any number of these cards onto another pile, provided rules one and two are adhered to.

On the 4 empty piles:

1. The first card must be the Ace of a suit.

2. The next card must be the next higher card.

3. The next card must be in the same suit.

The un-dealt cards:

1. Should be turned over 3 cards at a time.

2. On turning the last card the pile is ‘reset’.

The game is won when the last card (King) is placed on one of the four piles.

The game is lost when the player can no longer move.


BT Glide – Edition 07 – 20.01.06 – 7163

66

Help

Many common problems are caused by the telephone and power cables being incorrectly connected, or the power being switched off.

Please check that your BT Glide has been correctly set up, see page 6, before ringing the Helpline. Alternatively, you may also find a solution to your problem in this section.

BT Glide Helpline 0870 605 8047

Lines open 8am – 8pm, Monday to Saturday and 10am – 3pm on Sundays.

No display

• Check that the handset battery is charged. If necessary, replace the battery.

No connection between handset and base

• You may be out of range of the base. Move closer.

Handset does not ring

• Check that the battery is inserted correctly.

• Is the icon displayed? The handset ringer has been switched off, see page 56 to switch back on.

Your caller cannot hear you

• Secrecy is switched on. Press the Secrecy Off option button to speak to your caller again.

Handset not registering

• Check that the base is plugged into the mains power and switched on.

• Check that the handset battery is fully charged and fitted correctly.

Forgotten your PIN number

• Try entering the default PIN: 0000. If you have changed the number and cannot remember it, contact the BT Glide Helpline on 0870 605 8047.


BT Glide – Edition 07 – 20.01.06 – 7163

Help 67

Handset on the base does not charge

• Maximum charging power is only possible when no calls are being made.

• Make sure the handset is placed properly on the base. When charging, the battery light comes on.

Incoming caller’s number is not displayed even though you have subscribed to Caller Display

• Caller has to allow their number to be sent. It has been withheld or is unavailable.

Possible problems with text messaging

Cannot send text and screen displays

Message Sending Failed

• The Sending Service Centre number may be incorrect or may have been deleted.

See page 43 for instructions on how to re-enter the number.

• The base power supply or telephone line cord might not be properly connected.

Check that the base power supply is plugged into the wall socket and switched on and that the telephone is plugged into the telephone wall socket.

• There might be a fault on the line. Check your telephone line is working properly.

Cannot receive text

• The Receiving Service Centre number may be incorrect or may have been deleted.

See page 43 for instructions on how to re-enter the number.

• More than one text product is plugged into the line. Remove other products.

• Ensure you have subscribed to a Caller Display service and that it is active.

You can check this by noting if your phone displays your caller’s number when you receive an incoming call.

Handset is registered to the text service and text has previously been sent and received but you are now only receiving incoming messages

• This may be due to your handset being de-registered at the text service centre.

All you need to do is type

Register

and send it to 00000. You will receive a confirmation message back. This assumes that your Caller Display service is

active and working on your line. Messages sent to 00000 are not charged for.


BT Glide – Edition 07 – 20.01.06 – 7163

68 Help

Further help and advice for text messaging queries on BT lines

• BT Residential customers – call 151, choose option 2, when prompted by the

Fault Management Service select option 2, enter your phone number on the handset and wait to speak to a customer adviser.

• BT Business Customers – call 152, choose option 2, when prompted by the

Fault Management Service select option 2, enter your phone number on the handset and wait to speak to a customer adviser.

• For other telephone service providers please contact their customer services.

General sales enquiries

• BT Residential lines call 150. BT Business lines call 152.

• For other telephone service providers please contact their customer service.

Billing enquiries

• Refer to the telephone number shown on your telephone bill.

Other functions and services available from the text service

• By sending the following commands to the BT Text self administration facility you can control functions and capabilities in your text phone and the way messages are handled.

1. Press Menu , use the Navigation buttons to highlight the Text Messaging menu and press Select or . Then scroll to

Write Message


2. Type in the following commands (depending upon what you want to do):

Opt out from receiving voice text messages.

Turns off the opt out option.

Turns on permanent voice text message delivery to your phone.

All incoming text is delivered as voice text.

Turns off permanent voice text message delivery.

3. Press Options , scroll to

Send

and press Select . Then enter 00000 and press Send . Display shows

Sending Message

.


BT Glide – Edition 07 – 20.01.06 – 7163

Help 69

If you are sending a message from a fixed line phone to another fixed line phone

Forces a message you send to be delivered as a voice text even though the recipient may have an text enabled phone and usually receives written text.

This command is inserted at the start of the message and applies only to that message, e.g. ‘Hello I will be home late’.

If you require a status report to be sent back to you when you have sent a message to confirm delivery.

Place at the start of your text message. Write the message and send it. You will receive a reply text back to your phone giving the status report for that message.

You keep hearing an error beep

• You have pressed the wrong button in a sequence. Check the prompts in the display or refer to instructions in this user guide.


BT Glide – Edition 07 – 20.01.06 – 7163

70

General information

IMPORTANT

This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

Safety

• Only use the power supply suitable for the

BT Glide range. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone.

• For the handset, use only Li-ion 3.7 V

1150mAh battery packs. Never use other batteries as this could lead to a short circuit or destroy the battery casing.

• Do not open the handset (except to replace the handset battery). This could expose you to high voltages or other risks. Contact the

BT Glide Helpline on 0870 605 8047 for all repairs.

• Radio signals transmitted between the handset and base may cause interference to hearing aids.

• It is recommended that advice from a qualified medical expert be sought before using this product in the vicinity of emergency/intensive care medical equipment.

• It is recommended that if you have a pacemaker fitted you check with a medical expert before using this product.

• Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals.

• Your product may interfere with other electrical equipment, eg. TV and radio sets, and computers if placed too close. It is recommended that you place your product at least 1 metre away from such appliances to minimise any risk of interference.

Cleaning

• Simply clean the handset and base with a damp (not wet) cloth, or an anti-static wipe.

• Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock.

Environmental

• Do not expose to direct sunlight.

• The product may heat up when the battery pack is being recharged. This is normal.

However, we recommend that you do not place the product on antique/ veneered wood to avoid damage.

• Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces.

• Do not submerge any part of your product in water and do not use it in damp conditions, such as bathrooms.

• Do not expose your product to fire, explosive or other hazardous conditions.

• There is a slight chance that your phone could be damaged by an electrical storm.

We recommend that you unplug the power adaptor and telephone line cord from the base for the duration of the storm.


BT Glide – Edition 07 – 20.01.06 – 7163

Product disposal instructions

The symbol shown here and on the product means that the product is classed as Electrical or Electronic

Equipment and should not be disposed with other household or commercial waste at the end of its working life.

The Waste of Electrical and Electronic

Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill.

Product disposal instructions for residential users

When you have no further use for it, please remove any batteries and dispose of them and the product as per your local authority’s recycling processes. For more information please contact your local authority or the retailer where the product was purchased.

Product disposal instructions for business users

Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal.

General information 71

Technical information

How many telephones can you have?

All items of telephone equipment have a

Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any other telephone line. Your BT Glide has a REN of 1. A total

REN of 4 is allowed. If the total REN of 4 is exceeded, the telephone may not ring.

With different telephone types there is no guarantee of ringing, even when the REN is less than 4.

Switchboard compatibility

This product is intended for use within the

UK for connection to public switched telephone networks and compatible switchboards, which support tone dialling and timed break recall. If in doubt please consult your network service provider.

Dialling mode

Your BT Glide is set to Tone dialling.

Some older switchboards may require

Pulse dialling. To change the dialling mode,

see ‘Set the dialling mode’, page 60.

PABX access code

If you are connecting your BT Glide to a switchboard/PBX you may need to enter an access code (e.g. 9) in order to get an outside line, see ‘Set the PABX (switchboard)

code’, page 61. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code in numbers stored in the phonebook.


BT Glide – Edition 07 – 20.01.06 – 7163

72 General information

Enter a pause

To enter a pause in a number, press and hold at the point where you want to add a Pause.

R&TTE Directive

This equipment complies with the essential requirements for the Radio Equipment and

Telecommunications Terminal Equipment

Directive (1999/5/EC).

In demonstration with the Essential

Requirement for efficient use of the radio spectrum, the product complies with

EN301 406.

For a copy of the Declaration of Conformity please contact the BT Glide Helpline on

0870 605 8047.

Guarantee

Your BT Glide is guaranteed for a period of

12 months from the date of purchase.

Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the option to replace the BT Glide, or any component thereof, (other than batteries), which is identified as faulty or below standard, or as a result of inferior workmanship of materials. Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that occur within the 12 month guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its agent as instructed.

• This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents.

• This guarantee does not affect your statutory rights.

Within the 12 month guarantee period:

If you experience difficulty using the product, prior to returning it, please read the ‘Help’

section beginning on page 66, or contact the BT Glide Helpline on 0870 605 8047,

8am – 8pm, Monday to Saturday and

10am – 3pm on Sundays.

In the unlikely event of a defect occurring, please follow the Helpline’s instructions for replacement or repair.

Outside of the 12 month guarantee period:

If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you contact BT’s approved repair agent, Helpdesk Solutions on 08702

405029 or a local qualified repairer.

Returning your product

If the Helpline is unable to remedy your problem they will ask you to return the product. Where possible, pack the product in its original packaging. Please remember to include all parts, including the line cords, power supply units and the original batteries. Please note that we cannot take responsibility for goods damaged in transit.

Please obtain and keep proof of posting from the Post Office or other carrier.


BT Glide – Edition 07 – 20.01.06 – 7163

General information 73

For your records

Date of purchase:

Place of purchase:

Serial number:

For guarantee purposes proof of purchase is required so please keep your receipt.

[

Enter your remote access PIN here:

/ / / ]

(See page 54 for more information)


BT Glide – Edition 07 – 20.01.06 – 7163

BT Glide – Edition 07 – 20.01.06 – 7163

BT Glide – Edition 07 – 20.01.06 – 7163

Visit us at www.bt.com

Offices worldwide

The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to

British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract.

© British Telecommunications plc 2006.

Registered Office: 81 Newgate Street, London EC1A 7AJ.

Registered in England No. 1800000.

BT Glide (01/06) 7

Designed and produced by The Art & Design Partnership Ltd.

Printed in China

T9™ Text Input is a trademark or a registered trademark of

Tegic Communications.

The Bluetooth word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by British

Telecommunications plc is under licence.