Audiovox Phase Linear UDV7 Owner`s manual

UV8020
Installation and Operation Manual
CONTENTS
Thank you for choosing a Phase Linear product. We hope you will find the instructions in this
owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll
learn how to use all the features of your new Phase Linear UV8020 Mobile Multimedia
Receiver for maximum enjoyment.
Preparation............................................................................................................................ 1
Installation ............................................................................................................................. 2
Controls and Indicators ......................................................................................................... 5
Remote Control ..................................................................................................................... 6
Using the TFT Monitor .......................................................................................................... 8
Operating Instructions ........................................................................................................... 9
DVD Setup Menu ................................................................................................................ 11
Tuner Operation .................................................................................................................. 12
DVD/VCD Video Operation ................................................................................................. 13
DVD/CD Audio Operation ................................................................................................... 16
MP3/WMA Operation .......................................................................................................... 18
Troubleshooting .................................................................................................................. 21
Specifications ...................................................................................................................... 23
i
ii
UV8020
PREPARATION
Congratulations on your purchase of the Phase Linear
UV8020 Mobile Multimedia Receiver.
It’s a good idea to read all of the instructions before beginning
the installation. We recommend having your Phase Linear
UV8020 installed by a reputable installation shop.
Features
DVD
•
Aspect Ratio - Full and Normal
•
Fast Forward/Backward - 2X, 4X, 8X and 20X
•
Play, Pause, Stop, Next Chapter and Previous Chapter
CD / MP3 / WMA
•
ID3 Tag Compatible
•
Directory Search (MP3 / WMA Only)
•
Direct Track Access via Remote Control
•
Burn up to 1500 MP3 and WMA Files onto a DVD+R /
RW
•
Random, Repeat and Intro
•
Play, Pause, Stop, Next Track and Previous Track
AM-FM
•
30 Station Presets (18 FM / 12 AM)
•
Auto Stereo / Mono
•
Auto Store / Preview Scan
Auxiliary Input
•
Front Auxiliary Input (audio and video)
•
2.5mm to 3.5mm A/V Cable Included
•
2.5mm to RCA A/V Cable Included
Chassis
•
2.0 DIN (Import / ISO-DIN Mountable)
•
Motorized Slide Down LCD Screen
•
7" TFT Active Matrix LCD w/ Anti-Glare Coating
•
336,960 Sub Pixels (1440W X 234H)
•
Pixel Pitch - 0.107 X 0.370
•
Screen Tilt / Angle Adjustment
•
Beep Tone Confirmation (On-OFF Option)
General
•
44-Key Infrared Remote Control
•
Two Composite Video Outputs for Additional Screens
•
Three Preset EQ Curves
•
Front, Rear and Subwoofer Line Output
•
Programmable Volume Control
•
Rear Camera Input (Normal and Mirror Image View)
•
Touch Screen Calibration Mode
•
2VRMS Line Output - All Channels
What’s in the Box
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Left and Right Double DIN Mounting Brackets
Double DIN Sleeve
Remote Control with Battery
Two Custom Cosmetic Trim Rings
Screen Cleaning Cloth
M5x6 and M3x4 Screws to Mount Radio to Brackets
Speaker Output Harness
Power Input Harness
2.5mm to 3.5mm Accessory Cable
2.5mm to RCA Accessory Cable
Tools and Supplies
•
•
•
•
•
•
WARNING! Using an improper fuse may cause damage
to the unit and result in a fire.
WARNING! The monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do not push, pull or swivel the monitor manually.
Disconnecting the Battery
You will need these tools and supplies to install your UV8020:
•
•
•
WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
Torx type, flat-head and Philips screwdrivers
Wire cutters and strippers
Tools to remove existing radio (screwdriver, socket
wrench set or other tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 – 18 gauge speaker wire
WARNING! Only connect the unit to a12-volt power
supply with proper grounding.
WARNING! Never install this unit where operation and
viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except
when using for rear view video camera) never use the
video display function while driving the vehicle. This is a
violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.
WARNING! Never use irregular discs.
1
To prevent a short circuit, be sure to turn off the ignition and
remove the negative (-) battery cable prior to installation.
NOTE: If the UV8020 is to be installed in a car equipped
with an on-board drive or navigation computer, do not
disconnect the battery cable. If the cable is
disconnected, the computer memory may be lost. Under
these conditions, use extra caution during installation to
avoid causing a short circuit.
UV8020
INSTALLATION
ISO DIN Installation
This unit is designed to fit into a 2.0 DIN dashboard opening,
found in many imported cars. The unit has threaded holes in
the chassis side panels which may be used with the original
factory mounting brackets of some Toyota, Nissan,
Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the
radio to the dashboard. Please consult with your local car
stereo specialty shop for assistance on this type of
installation.
1.
2.
3.
Remove the existing factory radio from the dashboard or
center console mounting. Save all hardware and brackets as they will be used to mount the new radio.
Remove the four screws at the front of the radio that
attach the mounting sleeve to the radio chassis (two at
the top and two at the bottom). Remove the Half Sleeve.
Remove the factory mounting brackets and hardware
from the existing radio and attach them to the new radio.
CAUTION: For proper operation of the CD player, the
chassis must be mounted within 30° of horizontal. Make
sure the unit is mounted within this limitation.
TAB
NOTE: It is the end-users responsibility to install and
operate this unit in a manner in accordance with local,
state and federal laws. The PARKING BRAKE wire MUST
BE CONNECTED as directed in the manual.
TAB
Installation Using Mounting Sleeve
DASHBOARD
1.
Press the metal levers on both sides to remove the
mounting sleeve from the radio.
2. Install the sleeve.
a. Install adapter if necessary (optional).
b. Install sleeve into adapter or dashboard (use only the
supplied screws). Do not force the sleeve into the
opening or cause it to bend or bow.
DASHBOARD
3.
Use the M5 x 6 screws (provided) to install the mounting
brackets to each side of the radio using the holes
indicated below.
ISO INSTALLATION
INSTALL HALF SLEEVE
2b
Install Bracket Here
CAUTION: Do not exceed M5 X 6MM screw size. Longer
screws may touch and damage components inside the
chassis.
4.
5.
Place the radio in front of the dashboard opening so the
wiring can be brought through the dash. Follow the
wiring diagram carefully and make certain all
connections are secure and insulated with wire nuts or
electrical tape. After completing the wiring connections,
plug the ISO connectors into the mating sockets on the
rear of the chassis. Turn the unit on to confirm operation
(vehicle ignition switch must be “on”). If the unit does not
operate, re-check all wiring until the problem is
corrected.
Mount the new radio assembly to the dashboard or
center console using the reverse procedure in step 1.
Non-Designated
Screw Prohibited
c. Locate the series of bend-tabs along the top, bottom
and sides of the mounting sleeve. With the sleeve fully
inserted into the dashboard opening, bend as many of
the tabs outward as necessary so that the sleeve is
firmly secured to the dashboard.
M5X6
SCREW
BRACKET
4.
2
Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.
UV8020
CAUTION! Be careful not to damage the car wiring.
5.
The 4 tabs on the trim ring will snap into four holes on top and
bottom of the mounting sleeve.
Complete wiring as illustrated in the wiring diagram on
page 3. Once the wiring is complete, reconnect the
battery negative terminal. If there is no ACC available,
connect the ACC lead to the power supply with a switch.
TRIM RING
MOUNTING SLEEVE
OPTIONAL
MOUNTING
TRIM RING
SLEEVE
Replacing the Fuse
The fuse is located next to the wiring harness. When
replacing the fuse, use a new 15A replacement fuse. Using a
fuse with an improper rating could damage the unit and
cause a fire.
M3x4
SCREW
After completing the wiring connections, turn the unit on to
confirm operation (ignition switch must be on). If unit does not
operate, recheck all wiring until problem is corrected. Once
proper operation is achieved, turn off the ignition switch and
proceed with final mounting of the chassis.
1.
2.
3.
Connect wiring adapter to existing wiring harness.
Connect antenna lead.
Carefully slide the radio into the sleeve, making sure it is
right-side-up, until it is fully seated and the spring clips
lock it into place.
Using the Cosmetic Trim Ring
Two cosmetic trim rings are packaged with the UV8020 for
installation flexibility. The UV8020 will fit into most import
dashes with little or no modification to the dash board/cavity.
Some US domestic vehicle dashes will accept a Double-DIN
chassis, but there is usually a small gap between the radio
and dash piece after installation is complete. In this case, use
the appropriate trim ring to conceal any gaps that may be
present.
3
+
IGNITION SWITCH
PURPLE/BLACK(-)
BATT
GREY(+)
GREY/BLACK(-)
PURPLE(+)
REAR L
BLACK
YELLOW
RED
ACC
BATTERY
4
RED
BLUE
-
External Power Amplifier
WHITE
RED
Rear Video 2
Rear Video 1
BLUE/WHITE
Auto Antenna
WHITE
GND
REAR R
FRONT R
FRONT L
WHITE/BLACK(-)
WHITE(+)
GREEN(+)
GREEN/BLACK(-)
PINK (-)
CAMERA
VIDEO OUT 2
VIDEO OUT 1
FRONT L
FRONT R
REAR L
REAR R
SUBWOOFER
REVERSE
GREEN/WHITE (+)
PRK SW
YELLOW
YELLOW
YELLOW
ANT.CONT
FILTER/FUSE
(15A)
UV8020
WIRING DIAGRAM
Rear View
Video Camera
UV8020
CONTROLS AND INDICATORS
1. POWER/MUTE
Press to turn the unit on. Press and hold to turn the unit off.
UV8020
MultiMedia Receiver
When on, press to silence the receiver. Press again to
resume the previous volume level.
2. SRC
Press to select playing mode (SD, AV IN, DISC, Tuner).
3. VOL–
Press to adjust the volume lower.
4. VOL+
Press to adjust the volume higher.
10
5. OPEN/EJECT
Press to activate the automatic mechanical system and move
the TFT monitor down to reveal the CD and SD Card slots.
Press again to close the TFT.
Press and hold to view the on-screen tilt controls.
6. DIM
Press repeatedly to dim the TFT screen or return to the
brightness setting specified in the Setup menu.
7. A/V AUX IN
8. IR Remote Control Receiver
9. RESET
SRC
DIM
Press to reset system settings to factory default.
10. TFT Display
11. Disc Slot
8
12. Disc Slot Indicator
9
1
2
3
6
4
5
7
13. EJECT Disc
14. SD Card Slot
11
12
13
DISC IN
EJECT
LABEL SIDE UP
14
5
UV8020
REMOTE CONTROL
Table 1: Remote Control Functions
Button
Name
MENU
TITLE
Function
Ref#
1
2
DVD
VCD
8
TUNER
CD/MP3
Enters the main menu of
the disc
23
4
1
11
Enters the title menu of the
disc
20
MUTE
3
Toggles audio output on/off
Toggles audio output on/off
Toggles audio output on/off
Toggles audio output on/off
POWER/
4
Turns the power on/off
Turns the power on/off
Turns the power on/off
Turns the power on/off
13
REPT A-B
5
6
SUBTITLE
2
22
AUDIO
12
MODE
Select STEREO, MONO L
or MONO R output
Setup to repeat playback
from time frame A to time
frame B
Setup to repeat playback
from time frame A to time
frame B
Setup to repeat playback
from time frame A to time
frame B
Repeats playback of current track/album/directory
7
Repeats playback of current title/chapter
Repeats playback of current title/chapter
SRC
8
Selects playing mode
Selects playing mode
9
Selects subtitle language,
if available
OSD
10
Displays playing information
Displays playing information
ANGLE
11
Plays back disc in different angle for a scene
Plays back Picture CD with
different angle of picture
displayed
6
REPT A-B
7
DVD SETUP
OSD
TIME
Selects playing mode
Selects playing mode
24
Display playing information
17
TILT
V
V
V
V
32
18
34
PROG
16
21
26
33
Displays playing information
10
28
25
30
SUBTITLE
BAND
29
Changes the audio language for disc playback
REPT
9
31
15
OK
MUTE
14
19
3
5
MODE
12
Displays SOURCE Menu
Displays SOURCE Menu
Displays SOURCE Menu
Displays SOURCE Menu
SEL
13
Displays Audio/Display
Menu
Displays Audio/Display
Menu
Displays Audio/Display
Menu
Displays Audio/Display
Menu
14
Stops playback
Stops playback
VOL -
15
Decreases volume
Decreases volume
Decreases volume
Decreases volume
VOL +
16
Increases volume
Increases volume
Increases volume
Increases volume
17
Selects the previous chapter for playback, press and
hold for fast reverse
Selects the previous chapter for playback, press and
hold for fast reverse
Searches an available
radio station by decreasing
tuning frequency
Selects the previous track
for playback, press and
hold for fast reverse
18
Selects the next chapter
for playback, press and
hold for fast forward
Selects the next chapter
for playback, press and
hold for fast forward
Searches an available
radio station by increasing
tuning frequency
Selects the next track for
playback, press and hold
for fast forward
19
Pauses playback/starts
playback
Pauses playback/starts
playback
Pauses playback/starts
playback
GOTO
20
Enter chapter directly
Enter track directly
Enter track directly
ZOOM
21
Zooms in/out on an image
Zooms in/out on an image
BAND
22
EJECT
23
Opens Front Panel
Opens Front Panel
27
10+
Stops playback
NOTE: Your remote control may differ slightly from the
one pictured here. The above diagram is for illustrative
purposes only.
Selects AM/FM Band
Opens Front Panel
Opens Front Panel
6
UV8020
Table 1: Remote Control Functions
Button
Name
Function
Ref#
24
DVD
Decreases monitor tilt
angle
VCD
TUNER
Decreases monitor tilt
angle
Decreases monitor tilt
angle
CD/MP3
Decreases monitor tilt
angle
25
Increases monitor tilt angle
Increases monitor tilt angle
Increases monitor tilt angle
Increases monitor tilt angle
OK
26
Confirms Entry
Confirms Entry
Confirms Entry
Confirms Entry
1, 2, 3, 4, 5,
6, 7, 8, 9, 0,
10+
(Numeric
Keypad)
27
Directly accesses chapter
(press 10+ to move forward in increments of ten
and then press a single
number for the final digit)
TIME
28
Displays clock on TFT
Displays clock on TFT
DVD
SETUP
29
Displays DVD Setup menu
Displays DVD Setup menu
PROG
Directly accesses track
(press 10+ to move forward in increments of ten
and then press a single
number for the final digit)
Displays clock on TFT
Displays clock on TFT
Displays DVD Setup menu
30
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
31
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
32
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
33
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
Navigates on-screen menu
34
Displays Programmed
Playback Screen
Displays Programmed
Playback Screen
Displays Programmed
Playback Screen
7
UV8020
USING THE TFT MONITOR
Open/Close TFT Monitor
Image Setting
Open TFT Monitor
Table 2 shows the video output mode for each playing
source.
Press the EJECT button on the front panel (5) or remote
control (23) to slide the monitor panel down and reveal the
disc and SD card slots.
Table 2: Video Output Modes
Close TFT Monitor
Playing Source
Video Output Modes
Press the EJECT button on the front panel (5) or remote
control (23) to close the monitor panel.
AM/FM TUNER
RGB Mode
Monitor Tilt Angle Adjustment
DVD
RGB Mode
AUX IN
CVBS Mode
A known characteristic of LCD panels is the quality of the
display in relationship to the viewing angle. The monitor
angle can be adjusted for optimum viewing using one of the
following methods.
Step by Step Angle Adjustment
Press the ( ) or ( ) button on the remote control (25, 24)
to adjust the tilt angle of the screen one step at a time.
*CVBS – Composite Video Baseband Signal
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle
brake switch, the front TFT monitor will display video
only when the parking brake is engaged.
Continuous Angle Adjustment
Press and hold the ( ) or ( ) button on the remote control
to adjust the tilt angle in a continuous motion.
On-Screen Panel Controls
Press and hold the /EJECT button (5) on the control panel
to display the on-screen tilt control menu.
TILT+
•
•
•
TILT -
EXIT
TILT+: Touch repeatedly to tilt the bottom of the screen
outward.
TILT-: Touch repeatedly to tilt the bottom of the screen
inward.
EXIT: Touch to exit the on-screen tilt control menu.
Reverse Driving Use
If a review video camera is connected, the monitor
automatically switches to CAMERA mode when the vehicle is
put into reverse. When the vehicle is taken out of reverse, the
monitor returns to the source in use previously.
8
UV8020
OPERATING INSTRUCTIONS
Power On / Off
Volume Adjustment
Press the /
button (1) on the unit (or the
the remote control) to turn the unit on.
Press and hold the button to power off the unit. The
monitor is drawn back into the main compartment (if the Tilt
function is in use).
To increase or decrease the volume level, press the VOL-/+
buttons on the unit (3, 4) or on the remote control (15, 16).
When the volume level reaches “0” or “40”, a beep sounds,
indicating that the adjustment limit has been reached. The
volume ranges from “0” to “40”. The TFT screen displays the
volume level for 3 seconds.
Audible Beep Confirmation
Audio/Display Menu
An audible beep tone confirms each function selection. The
Beep tone can be disabled through the Setup menu.
The Audio/Display menu feature allows you to easily adjust
your audio system to meet the acoustical characteristics of
your vehicle, which vary depending on the type of vehicle and
its measurements. Proper setting of the Fader and Balance
boosts the effects of the cabin equalizer.
button (4) on
Mute
Press the /
button (1) on the front panel or the MUTE
button (3) on the remote to mute the volume from the unit.
MUTE” is displayed on the screen. Press the /
button
again to restore the volume. “ Adjusting the volume or using
any of the audio setup features cancels the mute function.
Playing Source Selection
Press the SRC button (2) on the front panel or the SRC
button (8) on the remote to change between available playing
sources in the following order: SD, AUX (AV-IN), DISC and
BAND (Radio). The playing mode is displayed on the TFT
screen.
Source Menu
You can also use the touch screen to change the source
through the SOURCE MENU. To access the SOURCE
MENU, touch the top left corner of the screen (or press the
MODE button (12) on the remote control).
•
Use the arrow keys on the remote control to move left/
right to select an option or up/down to modify settings
for the selected option.
Touch the arrows on the TFT screen at the top or bottom
of each option to adjust the settings.
To access the Setup Menu, touch the top left corner of the
screen to view the SOURCE menu, and then select the “SET”
option. The SET menu options are as follows:
•
•
•
•
•
Table 3: Audio Adjustments
Audio Function
EQ (graphic equalizer)
Adjustable Range
User
•
•
Flat
Clas (classical)
•
Pop
Touch the SD, AUX, DISC or BAND button to select the
corresponding source.
Rock
External Devices
BAS (bass)
External peripheral devices, including a game console,
camcorder, navigation unit, iPod, Zune, etc. can be
connected to the front of this unit using one of the A/V Media
Adapter Cables (included). Select “AUX” mode to access
auxiliary devices. You cannot directly control external devices
connected to the AUX IN inputs.
TRE (treble)
-7 to +7
FAD (fader)
F7 to R7
BAL (balance)
L7 to R7
BRI (brightness)
-8 to +8
CON (contrast)
-8 to +8
COL (color)
-8 to +8
SUB (subwoofer volume)
33 to 0
NOTE: External sources will be displayed incorrectly if
the MIRROR function is activated. To correct this
problem, access the setup menu and set the MIRROR
function to “OFF”.
Setup Menu (SET)
•
Press the SEL button on the remote control (13) or on screen
(or touch the bottom left corner of the screen) to view the
audio menu. To adjust an audio feature:
•
The Audio menu will automatically exit after a few seconds of
inactivity. To exit quickly, touch the bottom left corner of the
screen.
-7 to +7
NOTE: The EQ mode will automatically change to
“USER” when individual audio functions are adjusted. If
the USER settings correspond with a preset curve, that
EQ option will be displayed.
9
•
•
LOUD OFF/ON: When listening to music at low
volumes, this feature will boost the bass and treble
ranges to compensate for the characteristics of human
hearing. Touch the arrows to turn LOUD OFF/ON.
BEEP OFF/ON: Touch the arrows to turn the audible
BEEP confirmation OFF/ON.
24 HOURS/12 HOURS: Select 12 or 24-hour clock
display.
Clock: Touch the left arrow to set the hour and the right
arrow to set the minutes.
SUB OFF/ON: Select “ON” if an external subwoofer is
connected.
CAMERA OFF/ON: When a rear-view camera is
properly installed, the System will automatically display
the rear camera image when the vehicle is placed in
reverse gear. To view the camera image regardless of
the gear setting, select “ON”.
MIRROR OFF/ON: Select “ON” to reverse the screen
image for rear view camera use.
LCD CALIBRATE: Touch and hold to initiate screen
calibration. Touch the + marks when prompted.
VOL LAST/ADJUST
•
VOL LAST: When turned on, the unit will resume
the same volume level that was set when the unit
was last turned off.
•
VOL ADJUST: Select this option if you want to set
a turn-on volume (A-VOL) regardless of the volume
setting prior to turning the unit off.
A VOL: Touch the arrows to set the desired turn-on
volume when VOL ADJUST is selected.
US BAND/EURO BAND: Touch and hold to select
“EURO BAND”. The unit will automatically turn off and
re-boot when the tuner band is changed.
System Reset
To correct a system halt or other
[RESET] Button
illegal operation, use the tip of a pen
to press the reset button (9) located
on the front bottom-left corner of the unit. After a system
reset, the unit restores all factory default settings.
UV8020
NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.
10
UV8020
DVD SETUP MENU
ASPECT RATIO
4: 3 PS
With 16:9 display,
the left and right
sides are cut off.
SYSTEM LANGUAGE VIDEO
4:3 LB
VIDEO FORMAT
SCREEN SAVER
ASPECT RATIO
PASSWORD
RATING
DEFAULT
EXIT SETUP
PASSWORD
RATING
16:9
Image is presented in wide
view with a 16:9
aspect ratio.
____
Enter a 4-digit
password to activate the “Rating”
feature. The original password is
“8888”.
1 KID SAFE
3 PG
Use the , ,
or
cursor buttons to choose between
SYSTEM, LANGUAGE, or VIDEO setup options.
5 PG-R
6R
NTSC
PAL
AUTO
SCREEN
SAVER
ON
OFF
The color signals
are output in the
standard NTSC
format.
NOTE: Languages are DVD
dependent and
not all languages
may be supported.
SUBTITLE
LANG
The color signals
are output in the
standard PAL format.
The color signal
output is switched
automatically
based on the current video input
signal - NTSC or
PAL.
FRENCH
SPANISH
PORTUGUESE
GERMAN
MENU LANG
Select “Reset” to
restore the factory default settings for the
Rating system
only.
ENGLISH
GERMAN
SPANISH
Select the appropriate on-screen
language for the
DVD
ENGLISH
Select the default
language in which
you would like the
DVD menu (if
applicable) to be
displayed.
GERMAN
VIDEO SETUP
BRIGHTNESS
12 - 0
CONTRAST
12 - 0
HUE
+6 to -6
SATURATION
12 - 0
SHARPNESS
8-0
EXIT SETUP
11
NOTE: Subtitles
are DVD dependent and not all
languages may be
supported.
Turn subtitles off
PORTUGUESE
FRENCH
Turn screen saver
on/off.
Choose the language you would
like subtitles to
appear in (if available)
OFF
SPANISH
LANGUAGE SETUP
OSD LANGUAGE
ENGLISH
FRENCH
RESTORE
Choose from
audio languages
contained on the
DVD If you are
watching a disc
recorded in multiple languages
GERMAN
8 ADULT
DEFAULT
FRENCH
PORTUGUESE
7 NC-17
SYSTEM SETUP
ENGLISH
SPANISH
Select the appropriate rating level
for the intended
audience.
You may override
higher ratings by
using your password.
4 PG13
Table 4: System Setup Menu
AUDIO LANGUAGE
With 16:9 display,
the top and bottom are cut off.
2G
VIDEO FORMAT
Table 4: System Setup Menu
Table 4: System Setup Menu
During disc play, press the DVD SETUP button (29) on the
remote control to access the SYSTEM SETUP menu.
Use the / cursor buttons to set
the video output
options
UV8020
TUNER OPERATION
Tuner TFT Display
Seek Tuning
To seek the next higher station:
2
14
7
8
SRC
1
5
6
4
3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Touch the >>| button on screen.
Press the >>| button (18) on remote control.
To seek the next lower station:
P
15
•
•
87.50
1
EQ USER 2
3
4
5
01:13 6
SEL
PS
13
11
•
•
87.50
101.10
98.90
106.70
107.90
104.10
9
•
1
2
3
4
5
6
Touch the |<<| button on screen.
Press the |<< button (17) on the remote control.
Manual Tuning
To increase or decrease the tuning frequency one step:
•
•
AS
BAND
10
12
Current radio band indicator
Radio frequency indicator
Clock
Preset radio stations: Touch to recall preset stations
Current Equalizer Mode
|<<: Touch to seek backward
>>|: Touch to seek forward
Touch to tune forward one step
Touch to tune backward one step
AS: Touch to automatically store stations
PS (Preset Scan): Touch to scan all stored preset
stations, stopping for 5 seconds at each and continuing
until a station is selected
BAND: Touch to change between AM/FM bands
Touch to adjust Equalizer/Audio and Display settings
Touch to view the SOURCE menu and select a new
playback source
Current preset station indicator
Press the /\ or V buttons on screen.
Press and hold the |<< or >>| button on the screen or
remote control (17, 18).
87.50
101.10
98.90
106.70
107.90
104.10
Using Preset Stations
Auto Store (AS)
Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the screen.
To select six strong stations and store them in the current
band:
Storing a Station
1. Select a band (if needed), then select a station.
2. Press and hold the preset station position 1-6 on the
screen (4) or press and hold the number 1-6 button (27)
on the remote control.
1
2
3
4
5
6
3.
87.50
101.10
98.90
106.70
107.90
104.10
The new preset station (4) appears highlighted and the
preset station indicator (15) displays the new current
preset position.
Switching to Radio Tuner Source
•
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (4) to select the
corresponding stored station.
Touch the top left corner of the screen (SRC), or press
the MODE button (12) on the remote control, to view the
SOURCE menu. Touch “BAND”.
Press the SRC button (2) on the front panel or remote
control (8) to switch to the AM/FM or RADIO source.
Selecting FM/AM Band
Touch the BAND button (22) on the screen or remote control
(18) to change between the following bands: FM1, FM2,
FM3, AM1, and AM2.
12
1.
2.
Select a band (if needed).
Touch AS button on the screen (10) for to activate the
Auto Store function.
The new stations replace stations already stored in that band.
Preset Scan (PS)
Touch the PS button (11) on screen to scan all stored preset
stations, stopping for 5 seconds at each and continuing until
a station is selected. Touch again to stop preview scan.
UV8020
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays “DO NOT
WATCH VIDEO WHILE DRIVING” with a black
background. Rear video screens, if applicable, will
operate normally.
Inserting a Disc
also change the source by touching the top left corner to
display the “SOURCE” menu. Select “DISC” to access DVD
mode.
Stopping Playback
Controlling Disc Playback
To resume playback, touch the /|| button on screen or on the
remote control (19).
During DVD/VCD playback, press the center of the screen to
display the on-screen playback controls.
NOTE: INT and L/R are only available for VCDs.
SRC
INT
L/R
Press and hold the >>| or |<< buttons on the remote control
or on screen to fast forward or fast reverse. Press and hold
once for X 2. Press and hold additional times for X 4, X 8, X
20 or PLAY. Press the play/pause >/|| button to end fast
forward or reverse and resume normal playback.
SEL
•
•
•
•
NOTE: If you do not insert a disc or SD card, you must
press the EJECT button to close the control panel.
•
Ejecting a Disc
•
•
•
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the SRC button (2) on the front panel or remote control
(8) until “READ” appears near the top of the screen. You can a
Press the >>| button on the remote control (18) or on screen
to advance to the next chapter on the disc.
Fast Forward/Reverse
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
To eject a disc, you must first press the /EJECT button (5)
on the control panel or remote control (23) to reveal the disc
slot (11). Press the /EJECT button (13) behind the TFT
panel to eject the disc. The unit automatically reverts to Tuner
mode.
Touch the /|| button on screen or on the remote control (19)
to suspend or resume disc play.
Press the |<< button on the remote control (17) or on screen
to move to the previous chapter.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see “System
Setup Menu” on page 11).
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Pausing Playback
Moving Through Tracks
To insert a disc, you must first press the /EJECT button (5)
on the control panel or remote control (23) to reveal the disc
slot (11). Insert a disc, label side up, into the disc slot. The
front panel will close automatically and disc play begins.
NOTE: The unit is designed for play of standard 5” (12
cm.) discs only. Do not attempt to use 3” (8 cm.) CD
singles in this unit, either with or without an adaptor, as
damage to the player and/or the disc may occur. Such
damage will not be covered by the warranty on this
product.
Touch the button on screen or on the remote control (14) to
stop disc play.
•
•
•
•
AUDIO
SUBTITLE
SRC: Touch to view the SOURCE menu and select a
new playback source.
INT: During VCD playback, touch to play the first 15
seconds of each track. When a desired track is reached,
press the INT button again to cancel the function and
play the selected track.
: No function.
L/R: During VCD playback, touch to choose between
Mono Left Channel, Mono Right Channel, and Stereo.
: Press to stop and retain playback position. Press
again to stop and return to beginning of disc.
: Touch to move to the previous track.
: Touch to move to the next track.
SEL: Touch to adjust Equalizer/Audio and Display
settings.
AUDIO: Touch to choose an alternate audio language, if
available.
: No function.
SUBTITLE: Touch to activate subtitles, change subtitle
language or disable subtitles, if available.
: Touch to suspend playback. Touch again to resume
playback.
13
Repeat Chapter/Title (REPT)
Press the REPT button (7) on the remote control multiple
times during playback to select from the following repeat play
options:
•
•
VCD: REP ONE (track), REP ALL (disc), REP OFF
DVD: REP Chapter, REP Title, REP OFF
Repeat Section (REPT A-B)
To repeat a specified section of a track (chapter), perform the
following steps:
•
•
Press the A->B button on the remote control (6) to
select the starting point. The display will show “REPEAT
A-”.
Press A->B when you reach the desired ending point.
The display shows “REPEAT A-B” and the selected
section will play repeatedly.
To cancel section repeat, press the A->B button again. “A-B
CANCEL” appears on the display.
DVD Playback Features
The following remote control features are available during
DVD playback:
•
•
AUDIO: Press to choose an alternate audio language, if
available.
SUBTITLE: Press to select an alternate subtitle
language, if available.
UV8020
•
•
•
TITLE: Press to display the title or chapter list. Use the
, ,
or
cursor buttons or the numeric buttons to
enter a title or chapter number, and then press OK to
play.
ANGLE: Press to select an alternate viewing angle, if
available.
ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3,
ZOOM 4, ZOOM 1/2, ZOOM 1/3 or ZOOM 1/4, or select
OFF to return to normal view.
NOTE: Feature availability is dependent upon DVD
embedded information.
Programmed Playback
1.
To delete the list, highlight “CLEAR” and then press OK.
Press PROG to exit the programmed playback screen.
•
1/4 ENG – English is the selected subtitle language
out of 4 possible choices
Remote Control Direct Track Entry
•
OFF – There are no alternate angles recorded for
this scene
To select a track directly, use the number pad on the remote
control (27). For single digit entries, press the corresponding
number. For two digit entries, press the 10+ button followed
by the last digit (i.e., for track 16, press 10+ and then 6).
VCD Playback Information
The following information is displayed at the top of the screen
during VCD playback:
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
1.
2.
Press the PROG button (34) on the remote control to
access the programmed playback screen:
3.
Press the GOTO button (20) on the remote control. The
On Screen Display information will appear with the track
number highlighted.
Use the number keys on the remote control to enter the
3-digit track number directly (i.e. for track 10, enter
“010”.
Press the OK button to confirm and begin playback.
Playback Information
During DVD and VCD playback, press the OSD button (10)
on the remote control to display playback information on the
screen, including the media playing and current playback
time. Continue pressing the OSD button to display additional
information, as indicated below.
DVD Playback Information
•
•
•
TRK ##/## – “1/18” indicates the first of 18 tracks on the
VCD is currently playing.
– “X” indicates repeat play is OFF, “1” indicates
repeat track, “D” indicates repeat directory, and “A”
indicates repeat disc.
Press OSD repeatedly to view the following information:
for elapsed/remaining playing time:
•
•
•
•
00:02:18 – total elapsed playing time for disc
C –00 :34 :37 – remaining playing time
T 00:02:18 – total elapsed playing time for current
track
C –00 :34 :37 – remaining playing time for current
track
General Disc Information
The following information is displayed at the top of the screen
during DVD playback:
Table 5: Disc Properties
Symbol
2.
Use the , ,
or
cursor buttons to access the
fields on the “PROG” screen.
PROG
•
•
•
•
•
•
OK
3.
4.
Use the number buttons on the remote control to enter a
track number in each field.
Press the >/|| button (19) on the remote control or
highlight “PLAY” on screen and then press OK to begin
playback in the numbered order indicated.
TT 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is
currently playing.
CH 2/16 – “2 / 16" indicates that the second of 16 titles
on the DVD is currently playing.
Press OSD repeatedly to view the following information:
for elapsed/remaining playing time:
•
•
00:02:18 – total elapsed playing time for disc
C –00 :34 :37 – remaining playing time
T 00:02:18 – total elapsed playing time for current
track
•
C –00 :34 :37 – remaining playing time for current
track
1/5 ENG – English is the selected audio language
out of 5 possible choices
5.1 CH – The current language is recorded in 5.1
surround sound
14
12cm Disc Properties
Max Play
Time
Single side single layer
(DVD-5)
Single side double layer
(DVD-9)
Double side single layer
(DVD-10)
Double side double layer
(DVD-18)
(MPEG 2
Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer
(VCD)
(MPEG 1
Method)
74 minutes
Single side single layer
74 minutes
UV8020
Table 6: Disc Symbols
Symbol
Meaning
Number of voice languages recorded. The
number inside the icon indicates the number
languages on the disc (maximum of 8).
Number of subtitle languages available on
the disc (maximum of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the
example on the left, the 16:9 video can be
converted to Letter Box video.
Indicates the region code where the disc
can be played.
• Region 1: USA, Canada, East Pacific
Ocean Islands
• Region 2: Japan, Western Europe,
Northern Europe, Egypt, South Africa,
Middle East
• Region 3: Taiwan, Hong Kong, South
Korea, Thailand, Indonesia, South-East
Asia
• Region 4: Australia, New Zealand,
Middle and South America, South Pacific
Ocean Islands/Oceania
• Region 5: Russia, Mongolia, India,
Middle Asia, Eastern Europe, North
Korea, North Africa, North-West Asia
• Region 6: Mainland China
• ALL: All regions
15
UV8020
DVD/CD AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and CD operation. Please see the DVD/Disc Video
Operation section for information about these topics.
•
•
The UV8020 will play music or other audio files from the
following disc media:
Controlling Playback
•
•
•
•
•
•
Stopping Playback
CD-DA
CD-R/RW
DVD
DVD+R/RW
DVD-R/RW
SD Card (see “MP3/WMA Operation” on page 18)
Upon inserting a disc, the TFT screen will close automatically
and the track number and elapsed playing time will appear at
the top of the screen (see “CD Playback Information” on
page 17).
RDM: Touch to activate/deactivate Random play mode.
: Touch to suspend playback. Touch again to resume
playback.
Programmed Playback
1.
Press the PROG button (34) on the remote control to
access the programmed playback screen:
2.
Use the , ,
or
cursor buttons to access the
fields on the “PROG” screen.
Touch the button on screen or on the remote control (14) to
stop disc play.
To resume playback, touch the /|| button on screen or on the
remote control (19).
Pausing Playback
Touch the /|| button on screen or on the remote control (19)
to suspend or resume disc play.
Moving Through Tracks
CD Player User Interface
Press the >>| button on the remote control (18) or on screen
to advance to the next track on the disc.
The on-screen indicators and touch key areas for CD
playback are outlined below.
Press the |<< button on the remote control (17) or on screen
to move to the previous track.
PROG
OK
Repeat Chapter/Title (REPT)
SRC
Touch the RPT button on screen or press the REPT button
(7) on the remote control multiple times during playback to
select from the following repeat play options: REP ONE
(track), REP ALL (disc), REP OFF.
INT
Repeat Section (REPT A-B)
To repeat a specified section of a track (chapter), perform the
following steps:
•
•
SEL
•
•
•
•
•
•
•
•
•
RPT
RDM
SRC: Touch to view the SOURCE menu and select a
new playback source.
INT: Touch to play the first 15 seconds of each track.
When a desired track is reached, press the INT button
again to cancel the function and play the selected track.
: No function.
: Press to stop playback.
: Touch to move to the previous track.
: Touch to move to the next track.
SEL: Touch to adjust Equalizer/Audio and Display
settings
RPT: Touch to activate/deactivate Repeat play mode
: No function.
Press the A->B button on the remote control to select
the starting point. The display will show “REPEAT A-”.
Press A->B when you reach the desired ending point.
The display shows “REPEAT A-B” and the selected
section will play repeatedly.
3.
4.
Use the number buttons on the remote control to enter a
track number in each field.
Press the || button (19) on the remote control or
highlight “PLAY” on screen and then press OK to begin
playback in the numbered order indicated.
To delete the list, highlight “CLEAR” and then press OK.
Press PROG to exit the programmed playback screen.
Remote Control Direct Track Entry
To cancel section repeat, press the A->B button again. “A-B
CANCEL” appears on the display.
To select a track directly, use the number pad on the remote
control (27). For single digit entries, press the corresponding
number. For two digit entries, press the 10+ button followed
by the last digit (i.e., for track 16, press 10+ and then 6).
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons on the remote control
(18, 17) or on screen to fast forward or fast reverse. Press
and hold once for X 2. Press and hold additional times for X
4, X 8, X 20 or PLAY. Press the play/pause /|| button to end
fast forward or reverse and resume normal playback.
16
1.
2.
3.
Press the GOTO button (20) on the remote control. The
On Screen Display information will appear with the track
number highlighted.
Use the number keys on the remote control to enter the
3-digit track number directly (i.e. for track 10, enter
“010”.
Press the OK button (26) to confirm and begin playback.
UV8020
CD Playback Information
The following information is displayed at the top of the screen
during CD playback:
•
•
•
TRK ##/## – “1/18” indicates the first of 18 tracks on the
CD is currently playing.
– “X” indicates repeat play is OFF, “1” indicates
repeat track, and “A” indicates repeat disc.
Press OSD repeatedly to view the following information:
for elapsed/remaining playing time:
•
•
•
•
00:02:18 – total elapsed playing time for disc
C –00 :34 :37 – remaining playing time
T 00:02:18 – total elapsed playing time for current
track
C –00 :34 :37 – remaining playing time for current
track
17
UV8020
MP3/WMA OPERATION
Instructions for TFT control and Insert/Eject are the same for
DVD and MP3 operation. Please see the DVD/Disc Video
Operation section for information about these topics.
Media and File Requirements
This player allows you to play back MP3 and WMA files
recorded onto CD-R/RWs, DVD+R/RWs, DVD-R/RWs and
SD cards. For CD-RW discs, please make sure it is formatted
using the full method and not the quick method to prevent
illegal disc operation.
Up to 1500 songs/files can be burned onto a disc/card for a
MEGA DVD music mix. Do not exceed this number of songs/
files or readability problems may occur.
MP3 Playing Order
Loading an SD Card
When selected for play, files and folders (Folder Search, File
Search or Folder Select) are accessed in the order they were
written by the CD writer. As a result, the order in which they
are expected to be played may not match the order in which
they are actually played. You may be able to set the order in
which MP3/WMA files are to be played by writing them onto a
medium such as a CD-R with their file names beginning with
play sequence numbers such as "01" to "99".
To Insert an SD card, you must first press the /EJECT
button on the control panel (5) or remote control (23) to
reveal the SD card slot (14). Insert the SD card into the card
slot and the unit will read the audio media files on the card
automatically.
For example, a medium with the following folder/file hierarchy
is subject to Folder Search, File Search or Folder Select, as
shown below.
DISC IN
EJECT
LABEL SIDE UP
MP3 Format Compatibility
The file naming formats listed below are compatible with this
unit:
•
•
•
ISO 9660 – file name: 12 characters, file extension: 3
characters
ISO 9660 – file name: 31 characters, file extension: 3
characters
Joliet – 64 characters
To remove the card, first press the SRC button (6) to switch to
another mode and stop SD playback. Push in and release to
pop the card out. Grasp the SD card and pull it straight out.
Most cards have a thin recess that helps with removal.
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly. Use the following settings when compressing audio
data for your MP3 disc:
•
•
Transfer Bit Rate: 128kbps
Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity,
disable additional writing. For recording on an empty disc up
to maximum disc capacity, use the "Disc at once" setting.
The UV8020 player will only recognize three folder levels and
does not display folders containing only other folders. In the
example above, the unit will display folders 3, 4, 6, and 8, but
not 2 and 7 since they do not contain any tracks directly.
Folder 5 is not recognized at all since it is at the fourth level.
18
UV8020
MP3 Player User Interface
Controlling Playback
Programmed Playback
The on-screen indicators and touch key areas for MP3
playback are outlined below.
Playing MP3/WMA Files
1.
Press the PROG button (34) on the remote control to
access the programmed playback screen:
2.
Use the , ,
or
cursor buttons to access the
fields on the “PROG” screen.
1
2
3
4
SRC
001.01
002.02
003.03
004.04
005.05
006.06
13
12
SEL
11
12.
13.
14.
15.
NOTE: When burning MP3 / WMA files onto a DVD disc,
use the 2X or 4X burning option, if available. This slower
burning speed will help eliminate buffer errors and
increase disc reading reliability. Also, use folders when
burning large numbers of songs / files to a disc for easy
music navigation. Select the "Disc at Once" option and
close your disc.
OSD
15
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
6
5
[ – ] NEVER LET ME DOWN AGAIN
14
1.
After inserting a MP3/WMA disc or SD card, files will play in
the sequence of the “Root” directory.
RPT
10
–
–
–
–
–
–
Cherr
Chris
Crazy
Phish
Phish
Phish
Stopping Playback
Touch the button on screen or on the remote control (14) to
stop playback.
RDM
9
8
7
SRC: Touch to view the SOURCE MENU and select a
new playback source.
: Touch to move up a folder.
: Navigate song list up.
OSD: Touch to view On Screen Display information.
: Touch to stop disc playback.
: Touch to move to the next track.
/||: Touch to play/pause disc playback.
RDM: Touch to activate/deactivate Random play mode.
: Navigate song list down.
RPT: Touch to activate/deactivate Repeat play mode.
SEL: Touch to adjust Equalizer/Audio and Display
settings.
Touch song to play.
: Touch to move to the previous track.
View ID3 information.
Touch these icons to access the corresponding media
on your disc or SD card. If the media type is not present
on the disc or card, the icon will not appear.
•
: Audio
•
: Photos
•
: Video
PROG
To resume playback, touch the /|| button on screen or on the
remote control (19).
Pausing Playback
OK
Touch the /|| button on screen or on the remote control (19)
to suspend or resume playback.
Moving Through Tracks
Press the >>| button on the remote control (18) or on screen
to advance to the next file on the disc.
3.
Press the |<< button on the remote control (17) or on screen
to move to the previous file.
4.
Repeat Playback
Press the REPT button (7) on the remote control to alter
repeat mode according to the following: REP ONE (Single),
REP DIR (Directory), REP OFF.
Use the number buttons on the remote control to enter a
track number in each field.
Press the >/|| button (19) on the remote control or
highlight “PLAY” on screen and then press OK to begin
playback in the numbered order indicated.
To delete the list, highlight “CLEAR” and then press OK.
Press PROG to exit the programmed playback screen.
Remote Control Direct Track Entry
NOTE: CD-R and CD-RW will not play unless the
recording session is finalized.
Fast Forward/Reverse
Press and hold the >>| or |<< buttons on the remote control
or on screen to fast forward or fast reverse. Press and hold
once for X 2. Press and hold additional times for X 4, X 8, X
20 or PLAY. Press the play/pause >/|| button to end fast
forward or reverse and resume normal playback.
To select a track directly, use the number pad on the remote
control (27). For single digit entries, press the corresponding
number. For two digit entries, press the 10+ button followed
by the last digit (i.e., for track 16, press 10+ and then 6).
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
1.
2.
3.
19
Press the GOTO button on the remote control. The On
Screen Display information will appear with the track
number highlighted.
Use the number keys on the remote control to enter the
4-digit track number directly (i.e. for track 10, enter
“0010”. Continue pressing the 10+ for multiples of ten
into the 1000’s.
Press the OK button to confirm and begin playback.
UV8020
MP3 Playback Information
The following information is displayed at the top of the screen
during CD playback:
•
•
•
TRK ##/## – “9/150” indicates the ninth of 150 tracks on
the disc is currently playing.
– “X” indicates repeat play is OFF, “1” indicates
repeat song, and “D” indicates repeat directory (folder).
Press OSD repeatedly to view the following information:
for elapsed/remaining playing time:
•
•
00:02:18 – total elapsed playing time for disc
C –00 :34 :37 – remaining playing time for disc
20
UV8020
TROUBLESHOOTING
Table 7: Troubleshooting
Problem
Cause
Corrective Action
GENERAL
Unit will not power on
Remote control does not function
No/low audio output
Radio Fuse blown
Install new fuse with correct rating
Car battery fuse blown
Install new fuse with correct rating
Illegal operation
Press the RESET button located in the bottom right corner of the front panel
Battery depleted
Replace battery with new one
Battery installed incorrectly
Remove battery and install correctly
Improper audio output connection
Check wiring and correct
Volume set too low
Increase volume level
Speakers damaged
Replace speakers
Heavily biased volume balance
Adjust the channel balance to the center position
Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections
Poor sound quality or distortion
Pirated disc is in use
Use original copy
Speaker power rating not compatible with unit
Connect proper speakers
Speaker is shorted
Check speaker contact
Incorrect connection between ACC and positive
battery wire
Check wiring and correct
No image
Incorrect connection to parking brake wire
Check wiring and correct
Parking brake is not engaged
Stop vehicle in safe place and apply parking brake
Flashing image or interference appears on
screen
DVD is not compatible with current “Video Format” settings
Change setup to accommodate disc
Improper video signal connections
Check wiring and correct
Improper aspect ratio setup
Use correct aspect ratio setting
Auto antenna is not fully extended
Connect the auto antenna control cable properly
Auto antenna not properly connected
Connect the auto antenna control cable properly
Cannot insert disc
Disc already inside unit
Eject current disc and insert new one
Image blurred, distorted, or dark
Disc is illegally copied
Use original disc
Unit resets itself when engine is off
TFT MONITOR
Prolonged image or improper height/width
ratio display
TUNER
Weak station searching
CD/DVD
21
UV8020
Table 7: Troubleshooting
Problem
Disc does not play back
Cause
Corrective Action
Disc is warped or scratched
Use disc in good condition
Disc is dirty or wet
Clean disc with soft cloth
Laser pickup is dirty
Clean laser pickup with cleaning disc
Incompatible disc is used
Use compatible disc
Disc rating exceeds Parental Lock rating limit
Change Parental Lock settings to lower restriction
Disc region code is not compatible with unit
Use disc with proper region code
Disc is inserted upside down
Insert disc with label side up
MP3
Interruption occurred during playback
Incorrect playback message displayed
Disc is dirty or scratched
Clean disc or replace
File is damaged/bad recording
Recreate disc with good files
Message is longer than LCD can display
Care and Maintenance
1.
2.
3.
4.
5.
6.
7.
8.
Use only a clean silicone cloth and neutral detergent to
clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in
scratching or discoloration.
Do not get water or cleaning fluids on the unit.
If the temperature inside the player gets too hot, a
protective circuit automatically stops play of the disc. If
this occurs, allow the unit to cool before operating the
player again.
Never insert anything other than a 5” (12 cm) compact
disc into the player as the mechanism can be damaged
by foreign objects.
Do not attempt to use a 3” (8 cm) CD-Single disc in this
unit, either with or without an adaptor, as damage to the
player and/or disc may occur. Such damage is not
covered by the Warranty on this product.
The CD player may not operate properly in extreme hot
or cold. If such conditions occur, allow the interior of the
vehicle to reach a normal temperature before using
player.
When the vehicle warms up during cold weather or
under damp conditions, condensation may appear on
the LCD panel. Should this occur, the screen will not
operate properly until the moisture has evaporated.
We suggest you use a cleaning disc in this unit more
frequently than in the unit in your home due to the
environmental conditions of the vehicle.
22
UV8020
SPECIFICATIONS
DVD/CD Player
Compatible Disc Media: DVD + R / RW (Single and Dual
Layer) and CD-R / RW
Compatible Media Formats: CD-DA, MP3, WMA, VCD,
SVCD, AVI, MPEG1 / 2, XviD, and Kodak picture CD (JPEG).
Signal to Noise Ratio: > 95dBA
Dynamic Range: > 90dB
Frequency Response: 20Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 kHz
D/A Converter: Multi-Bit Sigma-Delta Modulator
Video
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm)
Input: 1Vp-p (75-ohm)
FM Tuner
Tuning Range (USA): 87.5MHz - 107.9MHz
Tuning range (Europe): 87.50MHz-108.00MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1 kHz: 58dB
Image Rejection: 80dB
Stereo Separation @ 1 kHz: >30dB
Frequency Response: 30Hz - 15 kHz, -3dB
CEA Power Ratings
Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ <
1% THD+N
Signal to Noise Ratio: 70dBA below reference (Reference: 1
Watt, 4-Ohms)
Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used
as reference input)
Reference Supply Voltage: 14.4VDC
*Specifications subject to change without notice.
AM Tuner
Tuning Range (USA): 530 kHz - 1720 kHz
Tuning range (Europe): 522kHz-1620kHz
Sensitivity (-20dB): 15uV
Signal to Noise Ratio @ 1 kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2 kHz, -3dB
Monitor
Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen,
6.06" (154.1mm) W X 3.42" (87mm) H
Screen Type: TFT Liquid Crystal Display (LCD) active matrix
Resolution: 336,960 sub pixels, 1440 (W) X 234 (H)
General
Auxiliary Input impedance: 10k
Power Supply: 11 to 16VDC, negative ground
Amplifier Remote (Blue/White): 500mA max, current limited
protection
Operating Temperature: -20C ~ 65C
Fuse: 15-amp, ATO type
2.0 DIN chassis dimensions: 7" X 7" X 4" (178mm x 178mm x
100mm)
23
UV8020
24
Limited Warranty
DO NOT RETURN THIS PRODUCT TO THE STORE
CD or Multimedia Radios/Headunits
Audiovox Electronics Corporation (“the Company”) is committed to
quality and customer service, and are pleased to offer you this
Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions.
Who is covered?
The Company extends this warranty to the original retail purchaser of products
purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or
Canada. This warranty is not transferable or assignable. Proof of purchase is
required in the form of an original sales receipt.
What is covered?
The Company warrants that should this product or any part thereof, under normal
use, be proven defective in material or workmanship within 12 months from the
date of original purchase, such defect(s) will be repaired or replaced with a new or
reconditioned product (at the Company's option) without charge for parts and
repair labor.
What is not covered?
This Warranty does not cover the following:
•
Damage incurred during shipping or transporting the product to the
Company or a service center
•
Elimination of car static or motor noise
•
Defects in cosmetic, decorative or non-operative structural parts
•
Correction of antenna problems
•
Costs incurred for installation, removal or reinstallation of the product
•
Consequential damage to compact discs, USB devices, digital media
cards, accessories or vehicle electrical systems
•
Damage caused by improper installation, mishandling, misuse, neglect,
accident, blown fuse, battery leakage, theft or improper storage
•
Products whose factory serial number/bar code label(s) or markings
have been removed or defaced
•
Damage resulting from moisture, humidity, excessive temperature,
extreme environmental conditions or external natural causes
Please review the “Care and Maintenance” section of your Installation
and Operation Manual for additional information regarding the proper
use of your product.
Limitations
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,
IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES,
INCLUDING
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDER
INCLUDING
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection
with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
Obtaining Warranty Service
• To obtain repair or replacement within the terms of this Warranty,
call 1-800-323-4815 for the location of a warranty station serving
your area.
• You must prepay the initial shipping charges to the Company.
The Company will pay the return shipping charges for all
warranteed products returned to an address within the U.S.A.,
Puerto Rico or Canada.
• Please package the product securely to avoid shipping damage.
We recommend using a carrier that provides tracking service to
prevent lost packages. Lost or damaged packages are not
covered by this warranty.
• Provide a detailed description of the problem(s) for which you
require service.
Audiovox Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 1-800-323-4815
www.audiovox.com
© 2007 Audiovox
Ver. 121207
Printed in China