Brosura Auto-cutter CAB A4+

PRODUCT MARKING
Label Printer
Series
The Premium Class.
Edition 5
Application
The professional printer for
industrial demands
Our professional printers can be used
within a broad application range. Our
ambition was to create easy handling
and high reliability. The print mechanism
and the chassis are made of first-class
material, perfectly harmonized in form
and function. Any specific customer requirement can be realized with the exten-
sive amount of periphery and software.
Stand-alone operation, PC-application
or network operation: A+ is the solution
- any time.
Small and large labels precise and fast – examples
PCB identification label
Labels for cardboards
Type plates
Smallest label size 4 x 5 mm, if there is
only little space.
Labels up to DIN A4 /8.5“ size wide.
Pin sharp fonts, graphics and barcodes
with 600 dpi.
Overview of types One concept − four widths
Printing to measure
The small sized
material width up to 65 mm
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
Thermal transfer / Thermal direct
300
150
54.2
The fast allrounder
material width up to 120 mm
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
Thermal transfer / Thermal direct
203
300
600
250
250
100
104
105.6
105.6
The broad
material width up to 180 mm
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
Thermal transfer / Thermal direct
300
200
162.6
The extra broad
material width up to 235 mm
Printing method
Print resolution dpi
Print speed up to mm/s
Print width up to mm
Thermal transfer / Thermal direct
300
150
216
203/300/600 dpi
Technical details
Precise printing
Elaborate - easy made
1. Big graphic display
White backlight guarantees clearness of
display.
2. Ribbon retainer
The threepart tension axles allow a fast
and easy ribbon exchange.
3. Easy adjustment
The printhead is pressed down with two
sliding toggles. One is mounted to the
left label margin, the other one is pushed
to the right label margin.
4. Peel-off option
1
2
The label is removed via peel-off-plate.
A high printing and applying accuracy
can be achieved through the additionally
powered rewind assistant roller and the
pinch roller.
5. Peripheral connection
Add-on modules like cutter, external rewinder, present sensor, peel-off adapter
and applicators can be easily connected
via USB peripheral interface.
6. Solid, buckling resistant chassis
3
It is made of dye-cast aluminium.
All devices are assembled to it.
7. Roll holder
Designed to accommodate rolls 38 - 76
mm. Adaptors for rolls up to 76 and
100 mm and rotating roll holders are also
available. With the clamp small rolls are
also held securely.
8. Label re-winder
The threepart tension axles allow labels
or backing paper to be rewound with or
without the use of a core.
Removal of the roll is easy.
4
5
6
Transfer printer A4+ with
peel-off function
Innovative technology for a better
climate protection, energy-saving,
environmentally conscious.
Maintenance I Spare parts Easy servicing
and removing of consumables
Label sensor
The label sensor can be unlocked with only
one finger and can be removed for cleaning.
Printhead
7
The printhead can be exchanged in only a
few steps. Adjustments and settings are not
necessary.
8
Print roller
For cleaning or replacement the print roller
can be easily removed by loosening only
three screws.
9. One tool for all maintenance
tasks
Only one tool for all service requirements.
It is readily available in the machine.
9
Models
Four steps to the optimal appliance
1.
Transfer printing
For printing on standard paper, cardboard, textiles, plastic foil
(PE, PP, PVC, PA or PI). Wax, resin or wax/resin ribbons can be
used.
2.
Basic version
Thermal direct printing
All transfer printers can be operated in thermal direct
printing-mode without ribbon.
Dispense version „P”
1
For printing on labels and continuous material. After printing it
can be torn off with the ridged tear-off plate. It can be cut or
rewound externally.
3.
Compact cover
The 2-part cover of impact resitent plastic folds when opened.
Therefore, the printer needs the smallest footprint in its class.
4.
RFID ( additional option )
For printing and dispensing labels. During the printing the label is
removed from the liner. It can be taken off manually or by an
applicator. 1 The present sensor has to be ordered separately.
Metal cover
The transfer printers A4+ and A6+ are available with a full
metal cover (standard with the A8+) on request.
The cab RFID option for the printers of the A+-series reads
and rewrites transponders in smart-labels with 13.56 MHz
before the printing process.
Interfaces All required interfaces are factory installed
PC/SPS interfaces
 1. Serial RS232 C interface from 6600 up to 230.400 Baud
 2. USB 2.0 High Speed Slave interface
 3. Parallel Centronics acc. IEEE 1284
The data from the Centronics interface are
converted onto the USB Full Speed interface.
7
 4. Serial RS422 for long distance communication
Serial RS485 for networking up to 25 printers.
 5. Label selection box
Up to 16 different input signals for automatic loading and
printing of labels from the memory card.
10
Network connection
 6. Ethernet 10/100 Base T- interface with TCP/IP
protocol printing with LPR/LPD, Raw IP or FTP.
IP adress can be set manually or obtained via DHCP.
Status information and set up via internet browser.
FTP for firmware updates and PC-card Type II/CompactFlash
administration.
Error messages can be sent via e-mail or SNMP.
Time and date synchronization through time server.
 7. Slot for Wireless LAN-Card
or PC-Card Type II (PCMCIA)
 8. WLAN-card IEEE 802.11 b/g for wireless
network connection, dependent on chip set
IEEE 802.11 b: 11 MBit/s, 2,4 GHz Band
IEEE 802.11 g: 54 MBit/s, 2,4 GHz Band
6
9
2
1
Peripheral connection
 9. Two USB-Master interfaces to connect external
operation panel, keyboard, scanner other USB storage
 10. Slot for memory card CompactFlash Type I Card
 Standard  Option
Stand-alone operation
without PC
The layout of the labels is created either with the label software
or directly on the PC.
Label formats, fonts and graphic data, serial data and data
base contents are saved on the USB memory, the CF memory
card or on the internal IFFS printer memory.
Only the variable data is sent to the printer via keyboard or
host computer before being printed out.
Data of a barcode scanner or a scale can be fed additionally.
Technical data
A4+
A6+
A8+
1. Printhead
A2+
Printing method
Thermal transfer / Thermal direct
Print resolution dpi
300
203
300
600
300
300
Print speed up to mm/s
150
250
250
100
200
150
Print width mm
54.2
104
105.6
105.6
162.6
216
2. Material
Labels, continous rolls or fan-folded
thermal and standard paper, cardboard, textile, plastic foils PE, PP, PVC, PA, PI
Material thickness mm / weight g/m2
0.055 - 1.2 / 60 - 250
Label width1) mm
4 - 61
4 - 116
50 - 176 50 - 220
Width of carrier or of continuous material mm 25 - 65
25 - 120
50 - 180 50 - 235
Label height1) min. mm
4 - 1000
6 - 1000 10 - 1000
Label height when dispensing1) min. mm
12 - 200
25 - 200
Media roll: Total diameter up to mm 210
Core diameter mm
38 - 100
Winding direction
inside our outside
3. Ribbon
Ink
inside or outside
Roll diameter up to mm
80
Core diameter mm
25
Ribbon length variable up to m
500
Width up to mm
56
114
165
220
4. Internal re-winder (only peel-off version)
Total diameter up to mm
142
Core diameter mm
38.1
Winding direction
only outside
5. Dimensions of the printer
Height x Depth mm
274 x 446
Width mm
190
242
302
352
Weight kg 8,5
9
13
15
6. Label sensor
See-through sensor
for leading edge of the label or punching marks and end of material
Reflective sensor from the botton / from the top
for printing marks
Distance to locating edge mm
5 - 26
5 - 53
7. Electronics
Processor high speed 32 Bit ColdFire/Taktrate MHz
266
(RAM) MB
64
Memory IFFS MB Flash
8
Slot for memory CompactFlash-card Type I up to 1 GB

Slot for memory card Cardbus / PC-Card Type II

Real time clock, print-ad out of time and date

8. Operation panel
Buttons illuminated, depending on mode of operation Pause, Feed, Cancel, Menu, Enter, 4 x Cursor
LCD graphic display Width x Height in mm
60 x 40
lines/characters
4 / about 20
9. Interfaces
Parallel Centronics bi-directional acc. IEEE 1284

Serial RS 232 C 1.200 up to 230.400 Baud/8 Bit

USB 2.0 High Speed Slave for PC-connection

Ethernet 10/100 Base T, LPD, RawIP-Printing,
ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, 
TIME, Zeroconf, mDNS
RS 422, RS 485 1,200 up to 230,400 Baud/8 Bit

Peripheral connection

WLAN card 802.11b/g

USB Master for keyboard and scanner
2x 
Depending on label size, material and adhesive limitations are possible.
Critical material or applications have to be testet and cleared.
1)
 Standard  Option
Technical data 10. Monitoring
Stop printing if
On the Display
11. Settings
12. Test routines
Status reports
13. Fonts
Font types
Character sets
Bitmap fonts
Vector-/TrueType fonts
Font formats
Font width
End of ribbon End of labels
Printhead open
Data reception
Clock
WLAN field intensity
Date sheet
Ethernet state
abc Debug
Used memory
Input buffer
Temperature printhead
Access to memory card
Remaining quantity of ribbon
Time, date, digital or analog clock.
Country and language settings
BE, BG, CH, CN, CZ, DE, DK, ES, FI, FR,
GR, HR, HU, IR, IT, LT, MK, MX, NL,
NO, PL, PT, RU, RS, SE, SI, TH, TR,
UK, US, ZA
system settings, print parameters,
Interfaces, security
System diagnosis of memory and print head when switched on, Short Status, Status Print, font list, device list, WLAN
state, profile of print head, profile of
label, test grid, monitor mode, PPP state
Extensive status print with information about instrument setting, for example print length counter, runtime counter etc. Request of the machine status via software command. Detailed status messages on the display, for example network error-no link, barcode error etc.
5 Bitmap fonts incl. OCR-A, OCR-B and 3 Vector fonts Swiss 721, Swiss 721 Bold and Monospace 821 available internally, loadable TrueType fonts.
Optional Chinese (simplified Chinese)
Optional Thai
Windows 1250 up to 1257, DOS 437, 737, 775, 850, 852, 857, 862, 864, 866, 869, EBCDIC 500, ISO 8859-1 up to -10 and -13 up to -16, WinOEM 720, UTF-8, Macintosh Roman, DEC MCS, K0I8-R. All West and East European latin, cyrillic, greek, hebrew and arabic caracters are supported. Optional Thai and Chinese
Size of width and height 1 - 3 mm
zoom 2-10. Orientation 0°, 90°, 180°, 270°
Size of width and height 0.9 - 128 mm
variable zoom,
Orientation 360° in steps of 1°
Bold, italic, underlined, outline, negative, grey, vertical, depending on character fonts
Variable
14. Graphics
Graphic elements
Line, arrow, box, circle, ellipse, filled and filled with fading
Graphic formats
PCX, IMG, BMP, TIF, MAC, GIF, PNG
15. Codes
Linear Barcodes
Code 39, Code 93
Interleaved 2/5
Code 39 Full ASCII
Ident- and lead
Code 128 A, B, C
code of german
Codabar
Post AG
EAN 8, 13
JAN 8, 13
EAN/UCC 128
MSI
EAN/UPC Appendix 2 Plessey
EAN/UPC Appendix 5 Postnet
FIM
RSS 14
HIBC
UPC A, E, E0
2D-Codes
Aztec, Codablock F, Data Matrix, PDF 417, Micro PDF 417, UPS Maxicode, QR-Code, RSS 14 truncated, limited, stacked and
stacked omnidirectional, EAN-Datamatrix
All codes variable in height, module width and ratio. Orientation 0°, 90°, 180°, 270°. Optionally with check digit, printed cha-
racters and Start/Stop code depending
on code type.
16. Software
Programming
J-Script direct programming

abc-Basic Compiler

Database Connector

System diagnosis/ printer monitoring

Administration Network Manager

cab Label software cablabel R2 Lite

cablabel R2 Pro 
More
Easylabel, Codesoft, Nicelabel, 
Label software
Bartender, Label Matrix, Labelview
Windows driver
2000, XP32/64 bit,

2003 32/64 bit, Vista 32/64 bit
Mac driver
OS X printer driver from version 10.3 
Linux driver
Testet with Suse 9.0, 
CUPS based
17. Operation data
Power supply
100 - 240 V ~ 50/60 Hz, PFC
Energy consumption max. 300 W
Operation temperat. 10 - 35°C
Humidity
30 - 85% not condensing
Approvals
CE, FCC class A, CB, CCC, UL
 Standard  Option
The specifications are according to our current technical
knowledge. They are subject to change.
10
Accessories
Peripheral devices - optimal accessories at full benefit
For the printer
Page Basic d.
1. Cutter CU
2. Perforation cutter PCU4
3. Barcode tester
4. Guide plate for internal rewinding
5. External re-winder for direct printer connection
6. External re-winder with built-in power supply
7. External un-winding of rolls up to 300 mm Ø
8. Peel-off plate PS5 for automatic operation
9. Present sensor PS6 for manual /automatic operation
10. Pause adapter PS7 – pause of print job
11. Present sensor PS8 for manual operation
12. Present sensor PS9 custom specific
13. Extended peel-off plate
14. Adapter 76 mm Ø
15. Adapter 100 mm Ø
16. Rotating label un-winder IUX 76 mm Ø
17. External operation panel
18. Numerical keyboard
19. Compact keyboard
20. Standard keyboard
21. Media
10
10
11
11
11
11
11
12
12
12
12
12
12
13
13
13
13
13
13
13
13
Dispense d.
•
•
•
-
•
•
•
-
-
•
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A2+

-



















A4+
A6+
A8+






















-

-



















-












• Models
 Standard  Option
1. Cutter CU
2. Perforation cutter PCU4
The cutter is used to cut labels,
cardboards, textiles or heat shrinkable
tubing separately, either in multiple
cuts or at the end of the print job.
The perforation cutter is used to cut
labels, cardboards, textiles or heat
shrinkable tubing separately, either in
multiple cuts or at the end of the print job.
Cutting labels
and continuous
material
Cutter
CU2
CU4
CU6
CU8
For printer
A2+
A4+
A6+
A8+
2
500
Material weight up to g/m
Material width up to mm
65
120
180
232
Material height from mm 2 - Depending on material limitation
Cutter tray
-

-
-
Perforation cutter
For printer
Material weight up to g/m2
Material width up to mm
Material height from mm
Perforation gap mm
More gaps on request
Cutter tray
PCU4
A4+
500
120
12
2.5 / 10

Accessories 11
Testing of barcodes
Winding and unwinding of labels
3. Barcode tester
4. Rewind guide for internal
rewinding
Testing barcodes
directly after
printing. Can be
used together with
the external rewinder ER4 - ER8.
For 2D-Codes
on request.
The built-in scanner tests the barcodes
directly after printing. If the barcode is
not readable the printing process can be
stopped at once so the faulty labels can
be removed.
The internal rewinding is operated by
the dispense printer. The peel-off-plate
is replaced by the rewind guide plate
(for devices A2+ and A4+).
5. External rewinder
6. External rewinder
7. External unwinder
Direct connection onto the printer
With built-in power supply
For label rolls up to 300 mm Ø
The rewinder is screwed directly onto
the printer. The label winding is optional
inside or outside. A smooth and tight
winding is due to the electronic control
of the swing arm.
The rewinder can be attached to almost
every other printer. All other technical
data are according to the rewinder
(see section 5).
It enables a smooth feeding of labels for
heavy rolls. The unwinder works both
with inside and outside wound labels.
External rewinder
ER1 ER2 ER3 ER4
ER4
ER6
ER8
Roll Ø max. mm210210210210300300300
For printer
all A+-Series devices all A+-Series-devices & other manufac.
Material width up to mm 120
180
235
120
120
180
235
Winding speed up to mm/s 250
200
150
300
300
250
200
Power supply
24 VDC
100 - 240 V~ 50/60 Hz
Core Ø mm
40 - rewinding with or without cardboard core
Adapter mm
76 - rewinding with cardboard core
Winding of labels
inside or outside
External unwinder EU4 EU6 EU8
Roll Ø max. mm300300300
For Printer
A+-Series & other
manufactures
Material width up to mm 120 180 235
Core Ø mm
40
Adapter mm
76
Winding of labels
inside or outside
12
Accessories
Specific solutions for different requirements.
8. Peel-off adapter PS5
9. Present sensor PS6
10. Pause adapter PS7
For automatic operation
For manual and automatic
operation
Interruption of print job
Printing and dispensing of the label is
started via an external signal. The discharging can be made by a robot, applicator or manually. With six additional input and output signals like “label taken”
or “print of label is started” the labelling
process can be controlled.
There are two options:
1. Dispensing after removal (manual) without connection to the external peripherical connector.
2. Dispensing on demand (semi-automa-
tic) with present trigger, foot switch and external control system.
The printing can be paused by an external signal by using a label loop.
11. Present sensor PS8
12. Present sensor PS9
13. Extended peel-off plate
For manual operation
For dispensing labels where the outer
edges are not detected by the present
sensor PS6. The extension is made on
customer specification.
If labels are difficult to peel off we recommend a 10 mm extended peel-off plate.
The photo cell detects the label in peel
position and pauses the labelling process. After removing the label the next
one is printed instantly.
Accessories 13
14. Adapter 76 mm Ø
15. Adapter 100 mm Ø
16. Loose un-winder IUX 76 mm Ø
Recommended for heavy rolls with a core
diameter of 76 mm.
Both for very sensitive or small labels we
recommend a core diameter of 100 mm.
Recommended for dust-sensitive areas.
The roll is fixed tightly onto the un-winder.
(No abrasion due to the cardboard core.)
17. External panel
Connection: USB
Button: Pause, Feed, Cancel, Menue, Enter, 4 x Cursor
Display: 60 x 40 mm
Slot for: CF-card Type I
Interface: USB Master
18. Numerical
keyboard
Connection: USB
No. of keys: 19
L x W mm: 120 x 76
19. Compact
keyboard
Connection: USB
No. of keys: 86
L x W mm: 282 x 132
Cherry Classic Line
G84-4100 LCM
20.Standard keyboard
Connection: USB
No. of keys: 115
L x W mm: 460 x 192
Cherry G83-6504 LAD
21.Media
CompactFlash Type I
USB storage
Label formats, fonts,
texts and graphics
can be saved. It can
be accessed from the
printer or from the PC.
On this account the operation and the compliance with CE-standards is only warranted by using cabmade materials or materials recommended by cab.
22. Present trigger
23. Foot switch
24. Photo cell
25. Sub-D plug
15 pole
For semi-automatic applications
the printing, and peel-off-function can be activated via manual
control switch.
For semi-automatic applications the printing, and peel-offfunction can be activated via
foot switch.
For automatic product identification on the conveyor belt.
Supplies for Peel-off adapter PS5 Present sensor PS6/9
22. Present trigger


23. Foot switch


24. Photo cell
-
-
25. Sub-D plug 15 pole


25 pole
-
-
25 pole
For easy connection the
sub-D plug is equipped with
a screwed clamp.
Pause adapter PS7


-

-
Applicator A 1000





14
Applicator A 1000
Print and apply in real-time
1. Long operation lines
The guides have ball bearings which
avoid abrasion.
2. Variable product heights
With the pneumatic cylinder it is possible
to compensate differences in product
heights. It is available in different heights of
stroke.
3. Simple adjustment
Four screws are needed to adjust the
tamp pad to the dispensing edge. The
processing can be optimized at the
operator panel during the testing.
The applicator A 1000 represents, in
combination with the thermal printers
A2+, A4+ and A6+, the most economic
solution for both semi-automatic labelling and the integration into automated
production lines.
1
2
4. Pre-dispense key
Tests the labelling function. At the first
operation the label is printed and then
transferred via the applicator. By pushing
the button again the label is applied.
5. Air service unit
The mounting takes place directly on the
printer. The micro strainer prevents contamination, the compressed air regulator
guarantees the labeling quality.
6. High process reliability
The supporting air jet streaming, the
vacuum and the speed of the cylinder
are adjustable. For highly sensitive
products and packaging the pressure
to apply labels can be reduced to less
than 1 kg. Consequently there is no risk
of injury. To avoid contamination within
the vacuum channels are cleaned by an
air pressure impulse at the end of each
application.
7. Real-time labelling
3
4
5
6
7
8
Labels with a height of 25 - 200 mm and
with a width of 25 - 176 mm can be applied.
8. Quick assembly
Like any other accessory, the applicator is plugged into the printer with two
stoppers and can be attached with only
one screw.
Digital I/O-Interface
The master (e.g. PLC) starts or
stops the labelling process.
The status and error messages
are issued at the same time.
Label tranfer method
Tamp
Label width mm
25 - 176
Label height mm
25 - 200
Cylinder stroke mm
Stroke of tamp below
printer mm
Compressed air bar
Product surface
Product height variable

fixed
-
Product fixed

linear movement
-
Roll on
25 - 176
80 - 200
220 / 300
70 / 150
4-8
flat

-
-

Blow
25 - 176
25 - 100



Accessories 15
Tamp pad
Blow pad
Roll-on pad
During the print and apply cycle the product remains fixed. The universal tamp is
covered by a foil. According to the size of
the label the holes can be pierced. The
tamp pads are customized to the dimensions of the label sizes on request.
For applying pressure to sensitive products
the label can be blown onto the product
with the supporting air jet stream. The
print and apply cycle performs in a fixed
position or in a linear movement of the
product. The blow pad moves to a preadjusted position approx. 10 mm away
from the product.
Using the roll-on pad the label is dispensed
until it touches the roller. The tamp pad
moves on top of the product. The label is
then rolled on and applied by the movement of the product.
Printer on lower frame
The stand for flexible printer mounting
Stand
Printer holder
for A4+ and A6+, A2+ on request
Lower frame
The lower frame can be customized
according to the special requirements
regarding width and height. The print and
apply system is positioned by adjusting two bolts. The exact position of the
system can be adjusted on a guide rail.
The stand enables the fast and flexible
application of the printer in every manufacturing line. The labelling position is
easy to adjust in height and width. Four
guide rollers at the undercarriage provide
for mobility. It is adjusted with bases at
the place of installation.
The print and apply system is mounted
on a base plate with a thickness of 10 mm
and can be fixed with only one clamp.
Stand
Total height mm
1,600
Labeling height up to mm
1,400
Projection mm 230 - 500
Undercarriage
(base distance)
Width x Depth x Height mm 600 x 860 x 140
16
Software tools
Printer Control
Monitoring
Direct programming with J-Script
J
H 100
O R
S I1;0,0,68,70,100
T 10,10,0,5,pt20;sample
B 10,20,0,EAN-13,SC2;401234512345
G 8,3.5,0;R:30,9,0.3,0.3
A 1
Printer monitoring with Intra- and Internet
Job Start
Speed (100 mm/s)
Orientation rotated by 180°
Size of label (100x68 mm, gap 2 mm)
Text object/font: Swiss bold, 20 pt
Barcode EAN 13, size SC 2
Graphic, box 30 x 9 mm,
Line strength 0.3 mm
Number of labels (in this example 1)
The printer language is easy to understand and integrate into
your host system. Linkage of variable data with host application.
Label design, graphics and fonts are recorded on the compact
flash card. The host computer sends only the variable data to the
printer.
abc - Basic Compiler
The integrated HTTP- and FTP-Server enables, with standard
programs like web browser or FTP-clients, the print monitoring,
configuration, the firmware-update and the administration of the
memory card. Status signals, warning or error signals are sent
to users or administrators either as email or SNMP-datagram via
SNMP- and SMTP-clients.
As an integrated element of the firmware it enables the printer to
process data via BASIC programming before being transmitted
to print editing. Thereby external printer languages can be
replaced or data from other systems, e.g. SPS, can be transferred to be printed on different label sizes.
Database Connector
The database connector enables stand-alone printers to link up
data from a SQL-compatible database and to print. Data can be
rewritten and modified simultaneously to the printing process.
Administration
Network Manager
The cab network manager enables the user to govern several
printers within the network at the same time. It supports monitoring, configuration, firmware updates, memory card, datasynchronization and PIN-administration centrally.
Label software 17
Windows driver
The software to create labels
Create and print your label with a Windows program for ex. MS Word, Excel,
Access, Works, Corel Draw etc.
Windows printer driver are provided for
2000, XP 32/64 bit, 2003 32/64 bit,
Vista 32/64 bit.
Mac OS X-Treiber
Perfect labels need optimized text
fonts. cab offers a large number of bitmap and vector fonts. Height and width
of the font can be scaled and
the object can be positioned and arranged. Additional true type fonts can
be downloaded to the memory card.
Most of the country specific codepages are supported.
 cablabel R2 Lite
Extensive standard label software.
You get it - free of charge - with every
cab printer.
For MAC OS X cab offers a CUPS based
printer driver.
Linux-Treiber
 cablabel R2 Pro
Allows of the embedding of diverse data
bases into a label. An assistant supports
the creation of UCC/EAN 128 barcodes.
Wether simple texts, barcodes, graphics and the connection of databases,
cablabel R2 is most flexible - all in 24
languages.
MDI (Multiple Document Interface) helps
to open and handle several labels at
the same time. Objects can be copied,
moved and inserted into another label.
For LINUX cab offers also a CUPS based
printer driver.
Take advantage of using the multiple
possibilties of cablabel R2.
Integration into SAP R/3
Upload-Method SAP R/3
note no. 137 331
®
Create labels
with software
Transfer
replace file into
SAPScript
cablabel R2 provides its own drivers with
greater response to all different functions
of cab printers.
Exchange of
variable data
with SAPScript
and printout
cab developed together with SAP the
“replacefile“ application. This is a simple
way to run cab printers with SAPScript out
of SAP R/3.
Additional label Software
The transfer printers and print and apply
systems can be easily controlled with
Codesoft, Bartender or NiceLabel.
cablabel R2
Lite Pro
32-Bit Platform-compatibility
Windows 2000 SP4,
 
XP Professionnel SP2
Server 2003 SP2 and Vista 32 bit
Country specific
BE, BG, CH, CN, CZ, DE, DK, ES,
EE, FR, FI, GB, GR, HU, HR, IT, IL,  
JP, KR, LT, LV, MK, MX, NO, NL,
PT, PL, RU, SE, SI, RS, TR, US, ZA
Label samples
 
Online document. with tutorials  
 
Multi-level Undo
number of levels
1 40
 
Graphic format import
 
Color support
Color graphic reduction 
Text art 
 
TrueType font
 
Graphic barcodes
numbers
9 37
 
Native printer barcodes
Hidden (not printable) 
objects
 
Label preview
 
Graphics preview
Grid view/print 
OLE-Client 
Windows driver support 
Control of printers
1 99
Support of net printer (TCP/IP)
 
Bi-directional communication 
to the printer
Stand-alone
 
Printing to file
 
Font Downloader
Database
Database Manager
Access, DBF 
ASCII, ODBC, OLEDB 
Variables
Flexible date and time stamping  
Host of date and time with 
Date offset
Printing counter
 
Host counter 
Variable graphic images 
Free variables 
Global files 
Decimal value formating 
Basic formula 
User input fields
Text alignment 
Definition input format 
Minimum input length 
Selection of default values 
Automatic input 
Extras
UCC/EAN 128 and Maxicode 
Assistent
18
Delivery program
Part No.
Hardware
dpi
Part No.
Expendable Parts Part No.
5954105.001 Printhead 2/300
Transfer printer A2+/300
Transfer printer A2+/300P
5954081.001 Printhead 4/203
5954500
Transfer printer A4+/200
Transfer printer A4+/200P
5954505
5954072.001 Printhead 4/300
5954501
Transfer printer A4+/300
Transfer printer A4+/300P
5954506
5954502
5954077.001 Printhead 4/600
Transfer printer A4+/600
Transfer printer A4+/600P
5954507
5954513
5954106.001 Printhead 6/300
Transfer printer A6+/300
Transfer printer A6+/300P
5954514
5954107.001 Printhead 8/300
5954517.101 Transfer printer A8+/300
with metal cover
5954511
5954512
Expendable Parts
5954102.001 Print roll DR2
5954104.001 Rewind assist r. RR2
5954180.001 Print roll DR4
5954183.001 Rewind assist r. RR4
5954245.001 Print roll DR6
5954246.001 Rewind assist r. RR6
5954103.001 Print roll DR8
59545xx.102 Printer with RFID Read-
Write unit 13,56 MHz
59545xx.101 Printer with metal cover
59545xx.103 Printer with metal cover
and RFID Read-Write
unit 13,56 MHz
Content of Transfer printer,
delivery:
power cable, length 1,8 m
operating manual German/English
Programming manual English,
Windows printer driver 32/64 bit in 19 languages
for Windows 2000 / XP / 2003 and Vista,
MAC OS X driver German/English and French
Database Connector English
cablabel R2 lite in 24 languages,
operating manual English, French,
Spanish, Italian and German
CD-ROM:
Brief instruction Quick Start in 17 languages,
Operating manual German/English,
Set-up German/English,
Service manual German/English,
Spare part list German/English,
Part No.
Interfaces
5561041
WLAN-card 802.11 b/g
5954012.001 Metal cover A4+
5954013.001 Metal cover A6+
Parallel Centronics
Seriell RS422/RS485
5948382
5948000
5948001
5948002
5954200
5954201
5954191
Label selection box
5550818
Cable RS232 C
9/9-pin, length 3 m
5901616
Cable USB
length 3 m
Part No.
Accessories
Cutter
Cutter
Cutter
Cutter
CU2
CU4
CU6
CU8
5960050.351 Perforation cutter PCU4/2,5
5960050.352 Perforation cutter PCU4/10
5946995.001 Cutter tray 4
5948650.001 Tear-off plate TP2
5946244.001 Tear-off plate TP4
5946414.001 Tear-off plate TP6
5954108.001 Rewind guide RG2
for internal rewinding
5954190.001 Rewind guide RG4
for internal rewinding
on request
5570820
5570825 Barcode tester hl40-2
Barcode tester hl40-4
Barcode tester hl40-6
Delivery program 19
Part No.
Accessories
Part No.
Applicators
5948102
5943251
5945802
External rewinder ER1/210
External rewinder ER2/210
External rewinder ER3/210
5949002
Applicator A 1000-300
5948100
5946090
5946420
5945804
External rewinder ER4/210
External rewinder ER4/300
External rewinder ER6/300
External rewinder ER8/300
5949072
Universal tamp pad
A1021 70 x 60
5949075
Universal tamp pad
A1021 90 x 90
5946091
5946421
5945806
External unwinder EU4/300
External unwinder EU6/300
External unwinder EU8/300
5xxxxxx
Tamp pad
A1021 B x H
5948170
Interconnection set for ER/EU
5949076
Universal tamp pad
A1321 116 x 102
5946120.001 Peel-off adapter PS5
automatic operation
5949077
Universal tamp pad
A1321 116 x 152
5946900.001 Present sensor PS8
manual operation
5942353.001 Present sensor PS6
manual/automatic operation
5xxxxxx
Tamp pad
A1321 B x H
5xxxxxx
Blow pad
A2021 B x H
5946146.001 Pause adapter PS7
5xxxxxx
Roll on pad
5533240
Testbox 2
Automatic operation
Part No.
Fit-up aid
5949093
5xxxxxx
Lower frame 340 x 160
Lower frame W x H
5947400
Stand 1600
8913693
Printer holder
Part No.
Software
5580212
Database Connector
5580215
Network Manager
on request
Present sensor PS9
5948830
Extended peel-off plate
5954374.001 Adapter 76 mm Ø
5954375.001 Adapter 100 mm Ø
5954371.001 Rotati. label unwinder IU4 76 mm Ø
5954372.001 Rotati. label unwinder IU6 76 mm Ø
5954373.001 Rotati. label unwinder IU8 76 mm Ø
5954380.001 External operation panel
5917909
Numerical keyboard USB
on request
Compact keyboard USB, Cherry
Classic Line G84-4100 LCM
on request
Standard keyboard USB
Cherry G83-6504 LAD
5561043
Memory card
CompactFlash Type I
5561045
USB storage
5942345
Present trigger TR1
5580221
Label software cablabel R2 Pro
5535901
Foot switch SPS
9008486
Programming manual english,
printed copy
5941526
Photo cell to start SPS
5917652
Interface connector
SUB-D-plug 15 pole
Phönix Contact 2761606
5917651
Interface connector
SUB-D-plug 25 pole
Phönix Contact 2761622
The specifications are according to our current technical knowledge. They are subject to change.
Product marking
The cab Delivery program
Transfer printer
MACH4
Transfer printer
A+ Series
Transfer printer e4
Labels
Ribbons
Label software
Label dispenser
HS 150
Scanner and MDE
Laser Marking System
FL-Series
Safety housing
with Accessories
Germany
cab Produkttechnik
GmbH & Co KG
Postfach 1904
D-76007 Karlsruhe
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Telefon +49 721 6626-0
Telefax +49 721 6626-249
www.cab.de
[email protected]
© Copyright by cab/9008476
Print and Apply
Hermes A
France
cab technologies s.a.r.l.
F-67350 Niedermodern
Téléphone+33 388 722 501
www.cab.de
[email protected]
USA
cab Technology Inc.
Tyngsboro MA, 01879
Phone +1 978 649 0293
www.cabtechn.com
[email protected]
España
cab España S.L.
E-08304 Mataró (Barcelona)
Teléfono +34 937 414 605
www.cab.de
[email protected]
South Africa
cab Technology (Pty.) Ltd.
2125 Randburg
Phone +27 11-886-3580
www.cab.de
[email protected]
Print engine PX-Series
Asia 亞 洲 分 公 司
希愛比科技股份有限公司
cab Technology Co, Ltd.
台灣台北縣板橋市
民生路一段33號十九樓之一
Panchiao 220,
Taipei, Taiwan, R.O.C.
電話 Phone +886 2 2950 9185
網址 www.cabasia.net
詢問 [email protected]
Representatives in other countries on request.