HT-CN650DVW
E
HOME THEATER WITH DVD
F
ON STAND-BY
PRESET
OPEN CLOSE
MUTE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
SETUP
ENTER
MENU
PBC
1
2
4
5
7
8
TITLE
RETURN
3
S
6
9
EQUALIZER
PROG
0
MIC
ECHO
LISTENING
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
MODEL
V
HT-CN650DVW
I
N
OPERATION MANUAL
P
E
61
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from
this product, please read this manual carefully. It will guide you in operating your
SHARP product.
HT-CN650DVW Home Theater with DVD consisting of HT-CN650DVW (main unit),
CP-CN650F (front speakers), CP-CN650C (centre speaker), CP-CN650R (surround
speakers) and CP-CN650SW (subwoofer).
Special notes
- Introduction / Special notes -
Important Instruction
WARNING
When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still
present inside the unit. When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the remote control.
This unit contains no user serviceable parts. Never remove covers unless qualified
to do so. This unit contains dangerous voltages, always remove mains plug from the
socket before any service operation and when not in use for a long period.
To prevent fire or shock hazard, do not expose this appliance to dripping or
splashing. No objects filled with liquids, such as vases, should be placed on the
apparatus.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or broadcasting such
material without permission of the relevant licensees or owners of the copyright is
prohibited by law. SHARP is not in a position to authorise the copying or broadcasting
of copyright materials and nothing in this OPERATION MANUAL should be implied as
giving that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must not be recorded
without the authority of the owner of the copyright. Please refer to the relevant laws in
your country.
COPYRIGHT
CAUTION
This product is classified as a CLASS 1 LASER product.
This product contains a low power laser device. To ensure continued safety, do not
remove any cover or attempt to gain access to the inside of the product. Refer all
servicing to qualified personnel.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorised by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories, “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
Copyright Information:
Unauthorised copying, broadcast, public display, transmission, public
performance and rental (regardless of whether or not such activities are for profit)
of disc contents are prohibited by law.
This system is equipped with copy protection technology that causes substantial
degradation of images when the contents of a disc are copied to a video tape.
Copyright Protection:
This unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of the DVD disc are
copied using a VCR, the copy protection code prevents the video tape copy from
playing normally.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and
4,907,093, licensed for limited viewing uses only.
2
03/10/29
HTCN650DVW_AUS.fm
Contents
System Connections
Speaker connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 13
Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connections to TV, VCR, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 17
Preparation for Use
System installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Battery installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Turning the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Changing the setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 25
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
DVD Operation
DVD playback
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 28
To resume playback after stopping (resume play) . . . . . . . . . . . . . . . . . . . . . . .28
DVD mode operation indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Basic operation
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . .29
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . .30
Useful operation
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
To change the angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
To zoom images (zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To play the contents between the specified points repeatedly (A-B repeat) . .34
To select a title from the top menu of the disc . . . . . . . . . . . . . . . . . . . . . . . . . .34
To select a subtitle or audio language from the disc menu . . . . . . . . . . . . . . . .34
Various settings
To change the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
To change the audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
F
Video CD and Super Video CD Operation
Video CD and Super Video CD playback
Playback of a video CD (super video CD) with P.B.C. . . . . . . . . . . . . . . . . . . . . 37
To play without activating the playback control function . . . . . . . . . . . . . . . . . 38
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . . 38
CD, CD-R and CD-RW Operation
CD operation
To play in the desired order (programmed play) . . . . . . . . . . . . . . . . . . . . . . . . 39
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . . 39
MP3/WMA, JPEG and DivX disc operation
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . . 40
Playback on the menu screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 41
Rotating a picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
USB Memory Device Playback
USB memory device operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Radio Operation
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - 45
Advanced Features
S
Enjoying various sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 47
Adjusting channel delay/speaker level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 - 49
Sleep operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Playing karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
References
N
E
3
HTCN650DVW_AUS.fm
I
P
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 - 53
Error indicators and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 - 56
03/10/29
V
- Contents -
Types of playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Description of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 11
E
Page
Page
General Information
General Information
HT-CN650DVW
HT-CN650DVW
Types of playable discs
The DVD player can play back discs bearing any of the following marks:
Disc type
DVD Video Disc
Disc contents
Audio and video
(movies)
Disc size
12 cm (5")
8 cm (3")
Super Video CD
Audio and video
(movies)
12 cm (5")
8 cm (3")
Types of playable DVD discs vary depending on the region. This unit can play back
only DVDs with the same region number are written on the back of the unit.
2
- Types of playable discs -
General Information
Video CD
Audio CD
Audio and video
(movies)
12 cm (5")
8 cm (3")
Audio
12 cm (5")
8 cm (3")
or
3
or
4
or
5
Icons used in this operation manual
Some functions may not be available depending on discs. The following icons indicate
the discs that can be used in the section.
... Indicates DVDs.
... Indicates Super video CDs.
... Indicates video CDs.
CD-R/CD-RW (*1)
Audio and picture
12 cm (5")
8 cm (3")
... Indicates audio CDs.
... Indicates CD-R/RW with MP3 recording.
... Indicates CD-R/RW with JPEG recording.
Or CD-R/CD-RW recorded in MP3 format
(*2), JPEG format (*3) (*4) (*5)
DivX® Video disc (Ver 5.2 and below)
... Indicates DivX® video.
Audio and video
(movies)
12 cm (5")
8 cm (3")
(*1): The CD-R/CD-RW may not be played back properly depending on the recording
equipment or the disc.
(*2): If the sampling frequency is 44.1 or 48.1 kHz and the fixed bit rate is 128 kbps
or higher, MPEG 1 Audio Layer 3 (MP3) files can be played. However, some of
them may not be played depending on their conditions or formats.
(*3): This unit also can recognise .AVI, .DIV, .MPG, .MPEG and .XVID. Bitrate can go
up to 4.8 Mbps.
(*4): JPEG or JPG picture discs also play on this unit. However, pictures may not be
clear (depends on resolution and recording method).
(*5): JPEG maximum resolution limit at 2M file size.
If photo bigger than this size, a dialog box will appear to display “over file size”
and go to next picture.
For unplayable discs, see page 7.
Some operations may not be performed depending on discs even if they are
described in this manual.
During operation, “ ” may be displayed on the screen. This means that the
operations described in this manual are not possible.
Copyright Information:
Unauthorised copying, broadcast, public display, transmission, public performance
and rental (regardless of whether or not such activities are for profit) of disc
contents are prohibited by law.
This system is equipped with copy protection technology that causes substantial
degradation of images when the contents of a disc are copied to a videotape.
This system is protected by U.S. patents and other intellectual property rights, the
copyright for which belongs to Macrovision Corporation. The use of Macrovision’s
copy protection technology in the system is authorised by Macrovision and is
intended for home use only, unless otherwise authorised in writing by Macrovision.
Reverse engineering or disassembly is prohibited.
4
03/10/29
HTCN650DVW_AUS.fm
Accessories
HT-CN650DVW
E
Please confirm that the following accessories are included.
F
Remote control × 1
“AAA” size battery
(UM-4, R03, HP-16 or similar) × 2
FM aerial × 1
Green and Black
(for centre speaker)
approx. 3 m
White and Black
(for left front speaker)
approx. 3 m
Blue and Black
(for left surround speaker)
approx. 8 m
Red and Black
(for right front speaker)
approx. 3 m
Grey and Black
(for right surround speaker)
approx. 8 m
V
- Accessories -
Audio/Video cable × 1
General Information
S
I
N
P
Speaker connection lead × 5
Note:
Only the above accessories are included.
E
5
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Precautions
General
Please ensure that the equipment is positioned in a well ventilated area and that
there is at least 10 cm (4") of free space along the sides and back. There must also
be a minimum of 15 cm (6") of free space on the top of the unit.
10 cm (4")
10 cm (4")
15 cm (6")
- Precautions -
General Information
10 cm (4")
The ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
Attention should be drawn to the environmental aspects of battery disposal.
This unit should only be used within the range of 5˚C - 35˚C (41˚F - 95˚F).
Use the unit on a firm, level surface free from
vibration.
Warning:
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generates electrical noise.
The sound level at a given volume setting depends on speaker efficiency, location, and
various other factors. It is advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on and listen to music at moderate levels.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than 60˚C (140˚F) or to
extremely low temperatures.
If the unit does not work properly, unplug and plug it in again. Then turn on the unit.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it from the wall socket, as
pulling the lead can damage internal wires.
The AC power plug is used as disconnect device and shall always remain readily
operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
The voltage used must be the same as that specified by this unit. Using this product
with a higher voltage other than that specified is dangerous and may result in a fire or
other types of accident, causing damage. SHARP will not be held responsible for any
damage resulting from the use of this unit with a voltage other than that specified.
Volume control
Care of DVD/CD discs
DVD/CD discs are fairly resistant to damage, however mistracking can occur due to
an accumulation of dirt on the disc surface. Follow the guidelines below for maximum
enjoyment from your DVD/CD collection and player.
Do not write on either side of the disc, particularly the non-label side from which
signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive moisture.
Always hold the DVD/CDs by the edges. Fingerprints, dirt, or water on the DVD/
CDs can cause noise or mistracking. If a DVD/CD is dirty or does not play properly,
clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.
NO
6
03/10/29
HTCN650DVW_AUS.fm
YES
Correct
Description of discs
HT-CN650DVW
Discs that cannot be played
DVDs without the region number on
the back of the unit or “ALL”.
DVDs with SECAM system
DVD-ROM
DVD-RAM
DVD-Audio
E
Icons used on DVD discs
CDG
CDV
Photo CD
CD-ROM
SACD
Discs recorded in special formats, etc.
The discs above cannot be played at all, or no sound is heard although images
appear on the screen or vice versa.
Incorrect operation may damage the speakers and can have an negative effect on
your hearing when played at high volume settings.
You cannot play illegally produced discs.
Check the icons on the DVD case before playing your discs.
Display
Description
Region number (playable area number)
DVD discs are programmed with region
numbers indicating countries in which
they can be played. This system can play
discs with region number on the back of
the unit.
To adopt the video format to the
connected TVs (“wide-screen TV” or “4:3
size TV”).
2
3
4
5
Format recorded on the DVD
F
S
You can enjoy wide images on a wide-screen TV, and letterbox size
images on the 4:3 size TV.
You can enjoy wide images on a wide-screen TV and 4:3 images
with the side edges cut on the 4:3 size TV.
Title, chapter and track
DVDs are divided into “titles” and “chapters”. If the disc has more than one movie on
it, each movie is a separate “title”. “Chapters” are subdivisions of titles.
Type of subtitles recorded
2
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 3
Chapter 1
Number of camera angles
Chapter 2
Track 2
Recorded subtitle languages.
Language can be selected with the
SUBTITLE button.
Number of angles recorded on the DVD.
Angles can be selected with the ANGLE
button.
2
Number of audio tracks and audio The number of audio tracks and audio
recording systems are indicated.
recording systems
Audio CDs consist of “tracks”.
A “track” is each tune on an audio CD.
Track 1
Example:
1: English
2: French
Track 3
Track 4
Track 5
Example:
1: Original <English>
(DTS 5.1 Surround)
2: English (Dolby Digital
5.1 Surround)
Note:
The audio recorded on the DVD can
be switched by using the AUDIO
button.
The number of audio tracks and
recording systems vary depending on
the DVD. Check them in the DVD's
manual.
- Description of discs -
A disc with has scratches or fingerprints may not play properly. Refer to “Care of
DVD/CD discs (page 6)” and clean the disc.
Do not play the discs of special shapes (heart or octagon shaped) as they can be
ejected whilst rotating and cause injury.
General Information
Recorded in 4:3.
Notes:
V
I
N
P
Title, chapter, or track numbers may not be recorded on some discs.
E
7
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Controls and indicators
Main unit (front panel)
2
1
3
4
5
6
7 8 9 10
- Controls and indicators -
General Information
13
15
11
12
16 17 18 19 20
14
21 22 23 24 25 26 27 28
29 30
31 32
Reference page
1.On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
2.Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.Function Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 27, 43
6.Speaker Level Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 49
7.Chapter (track) Skip Down or Preset/Tuning Down Button . . 29, 44
8.Chapter (track) Skip Up or Preset/Tuning Up Button . . . . . . . 29, 44
9.Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 37
10.Play or Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 28, 31
11.Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 26, 51
12.USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
13.Microphone Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
14.Speaker Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
(1) Left Front Speaker Indicator
(2) Centre Speaker Indicator
(3) Right Front Speaker Indicator
(4) Left Surround Speaker Indicator
(5) Subwoofer Indicator
(6) Right Surround Speaker Indicator
Reference page
16.JPEG Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
17.P-SCAN Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15,16, 21
18.Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 28, 30
19.Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
20.Dolby Digital Signal Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
21.SVCD/VCD/CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37, 38
22.MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
23.DTS Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
24.Dolby Pro Logic Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
25.Stereo (2-ch) or FM Stereo Receiving Indicator. . . . . . . . . . . . .44, 45
26.Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 29, 46
27.Track Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
28.Chapter Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 29, 46
29.Programme Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
30.Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
31.Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
32.A-B Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
15.DVD Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 28, 29, 30
8
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
E
Main unit (rear panel)
1
2
3
4
5
6
F
8
9
10
Reference page
1. AC Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
2. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3. Audio Input Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
4. Audio Output Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
5. Video Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
6. Component Video Output Sockets . . . . . . . . . . . . . . . . . . . . . . . . . .15
7. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
8. S-Video Output Socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
9. HDMI Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
10.FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cooling fan
This unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the
opening in this section with any obstacles.
- Controls and indicators -
7
<The spec label is located at the bottom of the unit>
General Information
S
V
I
N
P
Cooling fan
Caution:
The unit will get warm whilst being used. Do not touch the warm areas of the unit for
prolonged periods to avoid damage to you.
This unit is equipped with a special function which protects the amplifier circuit from
damages. When it is activated, the sound switch is turned off. In this case, unplug
the unit and, after 15 minutes or more, plug it in again.
E
9
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Controls and indicators (continued)
Remote control
1
2
3
4
5
ON STAND-BY
OPEN CLOSE
22
PRESET
MUTE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
7
- Controls and indicators -
General Information
6
8
9
10
11
12
26
FUNCTION
SETUP
ENTER
MENU
PBC
27
28
TITLE
RETURN
29
30
1
2
3
13
4
5
6
7
8
14
EQUALIZER
9
PROG
MIC
LISTENING
16
ECHO
MODE
18
19
20
21
31
0
15
17
23
24
25
32
VOLUME
33
34
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
35
36
37
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
4. Chapter (track) Skip Down or Preset Down Button . . . . . .29, 37, 44
5. Slow Motion Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
6. Fast Reverse or Tuning Down Button . . . . . . . . . . . . . . . . . . . . .29, 44
7. Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
8. Function Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20, 27, 44
9. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
10.Menu/Playback Control On/Off Button . . . . . . . . . . . . . . . . .33, 38, 41
11.Key Control Button (Lower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
12.Key Control Button (Normal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
13.Direct Number Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 33, 44
14.EQ (equaliser) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
15.MIC Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
16.Echo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
17.Speaker Level Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 49
18.Audio Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
19.Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
20.Subtitle Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
21.Direct Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 38
22.Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
23.Chapter (track) Skip Up or Preset Up Button . . . . . . . . . . . .29, 37, 44
24.On Screen Display On/Off Button . . . . . . . . . . . . . . . . . . . . . . . . . .36
25.Play or Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 28
26.Fast Forward or Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . .29, 44
27.Setup Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
28.Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
29.Title Select/Return Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 37
30.Key Control Button (Highest) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
31.Programme Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39, 41, 42
32.Surround/Stereo (2-ch) Listening Mode Button . . . . . . . . . . . .46, 47
33.Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 51
34.Volume Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 51
35.Angle Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
36.A - B Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
37.Zoom Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
38.Repeat Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33, 39
38
10
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Front/surround speakers
E
Subwoofer
2
F
3
1
S
Centre speaker
1
2
3
Reference page
1
1. Bass Reflex Duct
2. Woofer
3. Speaker Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3
Speaker functions
Front speaker:
Reproduces left and right sound (stereo mode) or front surround sound.
2
Centre speaker:
Reproduces centre surround sound.
Reference page
1. Speaker
2. Super Tweeter
3. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
- Controls and indicators -
1. Speaker
2. Super Tweeter
3. Speaker Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
General Information
Reference page
V
I
N
Surround speaker:
Reproduces rear surround sound.
Subwoofer:
Reproduces bass sound.
P
Notes:
Do not allow any objects to fall into or to be placed in the bass reflex ducts.
Front and centre speakers are magnetically shielded.
E
11
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Speaker connection
Speaker terminals on the main unit and speakers, and speaker wires are distinguished by colours.
Connect the speaker and the unit by matching the colours.
(For speaker installation, see page 18.)
Surround speaker
(left)
Front speaker
(right)
Centre speaker
92LXXXXXXXXXXX
Red
(+)
Blue
(+)
Black
Black
Green
(+)
- Speaker connection -
System Connections
Black
Purple
(+)
Black
White
(+)
Black
Grey
(+)
Black
Subwoofer
Front speaker
(left)
Surround speaker
(right)
12
03/10/29
HTCN650DVW_AUS.fm
Aerial connection
Connecting speaker wires
To prevent accidental short circuits between
and
terminals, connect the
speaker wires to the speakers first and then to the unit.
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the
direction where the strongest signal can be
received.
FM aerial
F
Note:
Red
(+)
External FM aerial:
Connect the other end to the main
unit.
Use an external FM aerial if you require better reception. Consult your dealer.
External FM aerial
Red Red
(+)
Black
( )
Black
Caution:
The supplied speakers for HT-CN650DVW is designed exclusively for
HT-CN650DVW. Do not connect speakers for HT-CN650DVW to other equipment.
Also, do not connect other speakers to HT-CN650DVW. It may cause malfunction.
Do not mistake the and , and right and left terminals of the speaker wires. (The
right speaker is placed on the right when you face the unit.)
Do not let the bare speaker wires touch each other.
Do not stand or sit on the speakers. You may be injured.
Do not short-circuit the speaker wires. If the power is
turned on, malfunction may occur.
When disconnecting the speaker wires, unplug the AC
power lead, and then disconnect the speaker wires from
the main unit.
System Connections
Connect the wires to the speakers.
- Speaker connection / Aerial connection -
Placing the aerial on the unit or near the AC
power lead may cause noise pickup. Place the
aerial away from the unit for better reception.
Black
( )
2
E
Supplied FM aerial:
Make sure to leave the AC power lead disconnected when connecting the
speakers.
1
HT-CN650DVW
S
V
I
N
P
E
Incorrect
13
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Connections to TV, VCR, etc.
Audio connection from TV or VCR
Caution:
You can enjoy surround sound from TV or VCR by connecting them to the unit as
shown.
Turn off all other equipment before making any connections.
TV
Audio signal
Connecting to a TV with a video input socket
Audio cable (supplied)
- Connections to TV, VCR, etc. -
System Connections
To audio
output sockets
Video
signal
To video
input socket
TV
Video cable (supplied)
To audio
input sockets
Audio signal
VCR
Audio signal
Audio cable (supplied)
To audio output sockets
Audio cable (supplied)
Connecting to a TV with an S-video input socket
Connecting to a TV with HDMI socket
TV
Video signal
To S-video
input socket
S-video cable
(commercially available)
Audio signal
Audio cable (supplied)
To audio
input sockets
HDMI cable
(commercially available)
TV
To HDMI
input socket
Note:
Please follow the below steps before turn on the power.
1. If your TV has the HDMI input socket, connect the DVD player with the HDMI cable
(the VIDEO OUT, S-VIDEO and COMPONENT VIDEO OUT sockets connection
are not necessary). You can enjoy clearer picture playback.
2. You no need to connect the left and right audio cables to the AUDIO OUT socket of
DVD player and the AUDIO INPUT socket of TV.
14
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
E
Connecting to a TV with Progressive-scan capability
Your TV must be capable of handling progressive scanning and have component video input capability.
F
*Component video cable
(not supplied)
To COMPONENT
VIDEO INPUT sockets
Red
White
Blue
Green
Green
Red
To audio
input sockets
R
L
AUDIO INPUT
Y
PB
PR
COMPONENT VIDEO INPUT
TV with
progressive-scan
capability
- Connections to TV, VCR, etc. -
Blue
Red
Audio cable
(supplied)
System Connections
S
V
I
N
* Please consult your local audio/video dealer.
1. Connect the DVD main unit to the component video input sockets of the TV. (The VIDEO INPUT or S-VIDEO OUT sockets connection is not encourage.)
2. You also need to connect the left and right audio cables to the AUDIO OUT sockets of DVD main unit and the Audio input sockets of the TV.
3. Set the DVD main unit to the PROGRESSIVE position. (See page 22)
P
E
15
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Connections to TV, VCR, etc. (continued)
Interlaced scanning
Progressive Scanning
- Connections to TV, VCR, etc. -
System Connections
Progressive scanning
Whilst interlaced scanning produces one frame of video in two fields, progressive scanning creates one frame in one field.
Conventional interlaced scanning constitutes one second with 30 frames (60 fields), but progressive scanning constitutes it with 60 frames from scratch.
Progressive scanning can reproduce sharper picture with high resolution for still image or other picture containing long texts or horizontal lines.
This model has compliance with 525p (progressive) system.
Notes:
Please refer to your TV instruction manual.
When you connect the DVD main unit to your TV, be sure to turn off the power and disconnect both units from the wall socket until all the connections have been made.
Do not connect the DVD main unit to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected.
16
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
E
To listen to TV or VCR sound via the speakers of this unit:
Press the FUNCTION button repeatedly to select the desired audio
input.
1
Unit display
ESET
PRESET
MUTE
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
F
“AUX 1” or “AUX 2”.
Wall socket
(AC 220 ~ 240 V, 50/60 Hz)
FUNCTION
FUNCTION
SETUP
2
ENTER
Audio connection to other equipment
Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
Notes:
Audio signal
To audio
MD recorder
input socket
Plug the AC power lead into the wall socket, after any connections.
Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
Use only the supplied AC power lead. Using other power leads may cause an
electric shock or fire.
AC Plug Adaptor
Audio cable
Notes:
Change the TV input in accordance with the connected socket.
Do not connect other equipment (VCR, etc.) between the TV and this unit.
Pictures may be distorted.
Refer to the operation manual of the equipment to be connected.
Insert the plugs fully to avoid fuzzy pictures or noise.
In areas (or countries) where a wall socket as shown in illustration 2 is used, connect
the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug
adaptor is not included in areas where the wall socket and AC power plug can be
directly connected (see illustration 1 ).
S
- Connections to TV, VCR, etc. -
OPEN CLOSE
System Connections
ON STAND-BY
V
I
N
Note:
An AC plug adaptor is not supplied if the lead has an Australian Standard plug.
P
E
17
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
System installation
Placing the speaker system
Notes:
The best surround effect will be achieved by placing each speaker at the same
distance from the listening position.
It is recommended to arrange the speakers as shown below.
Front
speaker (left)
Centre
speaker Front
speaker (right)
Place the TV halfway between the front speakers.
It is recommended that the centre speaker be placed near the television.
Place the surround speakers at a position just above the height of your ears.
The subwoofer vibrates whilst reproducing bass. Place it on a stable, sturdy
surface.
The bass sound from the subwoofer is non-directional, however, it is recommended
to place it as close as left and right speakers.
Centre speaker
Subwoofer
- System installation -
Preparation for Use
Same distance
Surround
speaker (left)
Surround
speaker (right)
Front speaker (left)
Note:
If speakers cannot be placed at equal distances, refer to “Channel delay setting”
(see page 49).
Installation image:
Same distance
Front speaker (right)
Magnetically shielded speakers
The front and centre speakers may be placed beside or near the TV as they are
magnetically shielded. However, discolouration may occur depending on the TV type.
If colour variation occurs...
Turn off the TV (with the power switch).
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
Refer to the manual of the TV for details.
Note:
The surround speakers and subwoofer are not magnetically shielded.
18
03/10/29
HTCN650DVW_AUS.fm
Battery installation
Turning the power on
1 Open the battery cover.
2 Insert the supplied batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
terminals.
battery
3 Close the cover.
HT-CN650DVW
Test of the remote control
E
Check the remote control operation after making all the connections (see pages 12 18).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
F
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your
system.
ON STAND-BY
Precautions for battery use:
ON STAND-BY
PRESET
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
MUTE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Incorrect installation may cause the unit to malfunction.
Battery (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
OPEN CLOSE
SETUP
ENTER
To turn the power on
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with operation. Change
the lighting or the direction of the unit.
Keep the remote control away from moisture, heat, shock, and vibrations.
Preparation for Use
0.2 m - 6 m
(8" - 20')
- Battery installation / Turning the power on -
Remote sensor
S
V
I
N
P
Power stand-by indicator
Press the ON/STAND-BY button.
E
If the power does not turn on, check the AC power lead is plugged in properly.
19
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Changing the setup menu
Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc.
accordingly.
ON STAND-BY
ON STAND-BY
PRESET
FUNCTION
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
SETUP
ENTER
Press the / or - button to select a menu
and press the ENTER button.
See the list on pages 21 - 25 for setup menu.
PRESET
SLOW
Press the SETUP button.
4
SETUP
Press the 8, 9, ; or : button to change the
setting and press the ENTER button.
See the list on pages 21 - 25 for the selectable
parameters.
TITLE
RETURN
ENTER
- Changing the setup menu -
Preparation for Use
OPEN CLOSE
MUTE
MENU
PBC
2
3
1
2
3
4
5
6
7
8
9
EQUALIZER
PROG
0
1
MIC
LISTENING
ECHO
MODE
5
Press the SETUP button.
The setting is completed.
To change other settings, begin from step 2.
Notes:
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
During playback, “PREFERENCES” settings cannot be changed.
Settings are stored even if the unit is set to the stand-by mode.
The backup function protects the stored settings for a few hours should there be a
power failure or the AC power lead disconnection.
If the startup screen is blurred, change the TV type in the setup menu.
Press the ON/STAND-BY button to turn the
power on.
The startup screen appears.
The startup screen does not appear when the
input is not set to the disc mode. Press the
FUNCTION button to select DVD mode.
20
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Change the system with conventional TV connecting
E
If you use a conventional TV, you must select the INTERLACE at “Video Setup Page” (see page 22).
INTERLACE mode is use for normal video output.
For conventional TV connection, please refer to page 14.
Change the system to a TV with Progressive-Scan
If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD main unit (see page 15), you must select the
PROGRESSIVE-SCAN (P-SCAN).
SPEAKER
SETUP
SPDIF
SETUP
DOLBY
DIGITAL
SETUP
OFF*
TEST TONE
SPDIF
OUTPUT
ON
OFF*
SPDIF OFF
SPDIF/RAW
SPDIF/PCM*
LPCM
48K*
OUT
96K
DYNAMIC(*1) FULL
3/4
1/4
OFF*
CHANNEL
DELAY
Description
The screen mode should be set according to the connected TV type (for details,
see page 24).
S
You can select the desired OSD (On Screen Display) language for the setup
menu or playback control screen.
A screensaver appears.
The screensaver is disabled.
If accidently push ON/STAND-BY or OPEN/CLOSE button during playback
mode, you can resume playback from the point playback is stopped after power
on back or you push the OPEN/CLOSE button to close the disc tray.
Last memory not function.
You can check speaker output (see page 49).
Useful whilst using HDMI cable.
When playing a disc recorded with Dolby Digital or DTS, the corresponding digital
signals will be output from the HDMI Output socket.
PCM: Choose this setting if the HDMI TV cannot support Dolby Digital or DTS
to avoid noise or mute from the TV.
RAW: Choose this setting if the HDMI TV can support Dolby Digital or DTS.
Select the sampling frequency at 48 kHz/16 bit or 96 kHz/24 bit capability after
you select SPDIF/PCM at SPDIF SETUP.
Audio with fully compressed dynamic range.
Audio with partially compressed dynamic range.
- Changing the setup menu -
AUDIO
SETUP
PAGE
Selectable parameters (* indicates default setting)
TV DISPLAY NORMAL/PS*
NORMAL/LB
WIDE
WIDE SQUEEZE
ANGLE
ON*
MARK
OFF
OSD LANG
ENGLISH*
RUSSIAN
FRENCH
SPANISH
SCREEN
ON*
SAVER
OFF
LAST
ON
MEMORY
Preparation for Use
Setup menu
GENERAL
SETUP
PAGE
F
V
I
N
P
Audio with uncompressed dynamic range.
Adjust the delay time of the speakers (for details, see page 48).
E
(*1)
Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.
21
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Changing the setup menu (continued)
Setup menu
VIDEO SETUP
PAGE
Selectable parameters (* indicates default setting)
TV MODE
P-SCAN
- Changing the setup menu -
Preparation for Use
INTERLACE*
PREFERENCE
PAGE
HDMI
SETUP
HDMI
SETUP
DivX VOD
HDCP
SETUP
VIDEO
FORMAT
OK
TV TYPE
PBC
AUDIO
SUBTITLE
PAL*
AUTO
NTSC
ON*
OFF
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
OFF*
OFF*
480p (60Hz)
720p (60Hz)
1080i (60Hz)
576p (50Hz)
720p (50Hz)
1080i (50Hz)
ON*
OFF
RGB 4:4:4*
YCbCr 4:4:4
Description
If connect DVD main unit (Component Video Output sockets, YPBPR) to TV
(Component Video Input sockets with progressive-scan capability) (see page
15).
If connect DVD main unit (Video Output socket or S-Video Output socket) to
TV (Video Input socket or S-Video Input socket) (see page 14).
You can select HDMI resolution whilst using HDMI cable.
SHARP provide you the DivX registration code that allows you to rent and
purchase videos using the DivX service.
Please go to www.divx.com/vod for more information.
Please refer page 24.
Select the language audible from the speakers.
Select the subtitle displayed on the TV screen.
22
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
EXIT SETUP
PASSWORD
CHANGE
E
Description
Select the disc menu language.
F
Set a restriction level for DVD viewing (for details, see page 25).
S
This resets all settings, except for PARENTAL and PASSWORD, to
the factory defaults.
See page 25 for password setting.
The setting is completed.
- Changing the setup menu -
PASSWORD
SETUP PAGE
Selectable parameters (* indicates default setting)
DISC MENU
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
PARENTAL
1 KID SAFE
2G
3 PG
4 PG 13
5 PGR
6R
7 NC17
8 ADULT*
DEFAULT
RESET
Preparation for Use
Setup menu
PREFERENCE
PAGE
V
I
N
P
E
23
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Changing the setup menu (continued)
TV display setting
Indicator
NORMAL/PS
- Changing the setup menu -
Preparation for Use
NORMAL/LB
Setting
When playing a wide image (16:9) disc,
the left and right sides of the image are
cut (pan scan) to display a naturallooking 4:3 size image.
A wide image disc without pan scan
is played back in 4:3 letterbox.
A 4:3 disc is played in 4:3.
When playing a wide image (16:9) disc,
black bands are inserted at the top and
bottom and you can enjoy full wide
images (16:9) on a 4:3 size TV.
TV type setting
Indicator
Setting
AUTO
Select this mode for the multi-system TV.
NTSC
Select this mode for the NTSC TV.
PAL
Select this mode for the PAL TV.
Language setting
Indicator
OSD LANG
Setting
A language for screen display can be set for the setup menu,
messages, etc.
English
French
DISC LOADING
WIDE
A 4:3 disc is played in 4:3.
A wide image (16:9) is displayed when
playing a wide image (16:9) disc.
AUDIO
DISQUE CHARGEMENT
A language for audio can be set.
You can specify a language for conversation and narration.
English
WIDE
SQUEEZE
When playing a 4:3 image disc, the image size depends on the
setting of the connected TV.
If you play back a wide image (16:9) disc with this unit connected
to a 4:3 TV, the vertically shrunk image is displayed.
When play 4:3 disc with this unit
connected to a 16:9 TV (wide screen
TV), the horizontally expended image is
displayed. If you use this setting, a
natural looking image 4:3 size can be
viewed with the black bands are inserted
at the left and right of the screen.
French
ou
nk y
Tha
SUBTITLE
A language for subtitle can be set.
The subtitles are displayed in a specified language.
English
If you playback a wide image (16:9) disc with 4:3 TV, the vertically
shrunk image is displayed.
Thank you
Note:
When playing the disc with a fixed video format, it will not change even if the TV screen
size is changed.
24
03/10/29
ci
Mer
HTCN650DVW_AUS.fm
French
Merci
HT-CN650DVW
English
French
CAST
ACTEURS
STAFF
PERSONNEL
Parental setting
1 Select “PREFERENCES” on the setup menu screen (see steps 1 - 3
on page 20).
2
3
After selecting “PARENTAL” in step 4 on page 20, select the
parental level and press the ENTER button.
Password setting
F
1
Enter the old password using the Direct Number buttons.
(If this is the first time, enter “000000”)
2
3
Enter the new password using the Direct Number buttons.
Enter the new password again for confirmation.
Enter a 6-digit password using the Direct Number buttons and press
the ENTER button.
Note:
If this is the first time, enter “000000”.
At setup menu, select “PASSWORD SETUP PAGE”, “PASSWORD” and then
“CHANGE”.
1 Enter the old password as “000000” using the Direct Number buttons.
2 Enter the new password.
3 Enter the new password again for confirmation.
Indicator
1 KID SAFE
2G to 7 NC-17
8 ADULT
Setting
Only DVD software intended for children can be played back.
Only DVD software intended for general use and children can be
played back.
DVD software of any grade (adult/general/children) can be
played back.
E
From the setup menu, select “PASSWORD SETUP PAGE”, “PASSWORD” and then
“CHANGE”. A screen appears.
When you forget your password, follow below sequence.
Note:
S
- Changing the setup menu -
A language for disc menus can be set.
Menu screens are displayed in a specified language.
Preparation for Use
DISC MENU
Whilst playing a disc with parental lock, the display may appear requesting a password
in order to watch some restricted scenes. In such a case, enter the password to
temporarily change the parental level.
V
I
N
P
E
25
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
General control
Volume control
Unit Display
Press the VOLUME + (VOLUME 8) button to
increase the volume and the VOLUME −
(VOLUME 9) button for decreasing.
TITLE
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
DIGITAL
Pro Logic
KHz
MHz
STEREO VCD MP3
MIN
2 ..... 38
1
39
MAX
Treble and Bass
Unit Display
ON STAND-BY
OPEN CLOSE
MUTE
1 Press the MODE button repeatedly to select
the TREB or BASS.
TITLE
TRK
PRESET
CHP
PROG
SLEEP
SLOW
PLAY PAUSE
TUNING
STOP
FUNCTION
- General control -
Preparation for Use
MUTE
KHz
MHz
PRESET
TUNING
SETUP
ENTER
MENU
PBC
−10 dB to +10 dB
OSD
2 Within 3 seconds, press the VOLUME +
(VOLUME 8) or VOLUME − (VOLUME 9)
button to adjust the level.
You can adjust the level at 2 dB intervals.
TITLE
RETURN
REPEAT 1 A - B
DB
DIGITAL
Pro Logic
STEREO VCD MP3
PRESET
TITLE
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
DB
DIGITAL
Pro Logic
KHz
MHz
STEREO VCD MP3
−10 dB to +10 dB
Muting
TV Display (TV Screen)
1
2
4
5
7
8
The volume is muted temporarily when pressing
the MUTE button on the remote control.
Press again to restore the volume.
3
6
TITLE
DIGITAL
Pro Logic
STEREO VCD MP3
PROG
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
STEREO VCD MP3
TITLE
9
EQUALIZER
TRK
DIGITAL
Pro Logic
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
0
MODE
MIC
LISTENING
ECHO
MODE
VOLUME
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
Auto power off function
In the stop mode of DVD function the unit enters to the stand-by mode after 20
minutes of inactivity.
26
03/10/29
HTCN650DVW_AUS.fm
DVD playback
HT-CN650DVW
Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc.
accordingly.
Playback
1 Press the ON/STAND-BY button to turn the power on.
2 When the input is not set to the disc mode,
press the FUNCTION button repeatedly to
display the startup screen.
E
No Disc
F
The startup screen appears.
PRESET
STOP
OPEN CLOSE
MUTE
OPEN CLOSE
Place the disc on the disc tray, label side up.
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
PLAY PAUSE
SETUP
FUNCTION
ENTER
MENU
PBC
TITLE
RETURN
1
2
3
4
5
6
S
OPEN/CLOSE button to open the disc tray.
Label side
Disc tray
V
- DVD playback -
ON STAND-BY
Press the
DVD Operation
ON STAND-BY
3
4
I
N
Be sure to place 8 cm (3") discs in the middle of the disc position.
7
8
9
EQUALIZER
PROG
0
MIC
ECHO
5
OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if
you do not press the PLAY/PAUSE
(
) button.
LISTENING
MODE
Press the
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
6
P
If playback does not start in step 5, press the PLAY/PAUSE
(
) button.
Note:
During operate FM/AUX, OPEN/CLOSE CD tray will change to DVD function.
E
27
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
DVD playback (continued)
To interrupt playback
Press the PLAY/PAUSE
(
) button.
To resume playback from the same point, press the PLAY/PAUSE
(
) button.
To resume playback after stopping (resume
play)
You can resume playback from the point playback is stopped.
To stop playback
1
DVD/VCD/SVCD/DivX:
Press the STOP () button twice.
When the unit is left unoperated for more than 5 minutes after pressing the STOP () button, a screen saver appears (see page 21 when the screen saver setting is
“ON”).
Press any button on the main unit or remote control. The startup screen returns.
2
To restart play, press the PLAY/PAUSE
(
) button.
Play resumes from the point you stopped.
To cancel the resume playback:
Caution:
- DVD playback -
Press Play Key To Continue
The system stores the point you stopped.
Audio CD/MP3/JPEG:
Press the STOP () button.
DVD Operation
Whilst a disc is playing, press the STOP () button.
Close the disc tray when not in use. Otherwise, dust may accumulate inside and
cause malfunction.
The unit gets slightly warm when used for a long time. It does not mean the unit is
damaged.
When attempting to play discs with scratches or of a different region number, or
unplayable or restricted (*1) discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audience age.
Notes:
During disc initialisation, the volume cannot be adjusted.
Stop positions may be recorded on some discs. When you play such a disc,
playback stops there.
During an operation, “ ” may appear indicating that the operation is disabled by
the disc.
The main unit detects loaded discs automatically and then the indicators light up.
Press the STOP () button twice.
Notes:
The resume playback feature is disabled on some discs.
Depending on the disc, playback may resume from slightly before the stopped
position.
DVD mode operation indicators
The following are examples of operation indicators that appear during DVD playback.
Operation
When the power is on
without a disc
Disc data is being
read
TV screen
NO DISC
TITLE
Stop
Play
Pause
28
HTCN650DVW_AUS.fm
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
TITLE
LOADING
VCD CD MP3
03/10/29
Unit display
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
Basic operation
ON STAND-BY
HT-CN650DVW
PRESET
E
Fast forward/Fast reverse (search)
OPEN CLOSE
PRESET
PRESET
MUTE
PRESET
You can search the desired point as you play the disc.
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
PLAY PAUSE
1
FUNCTION
SETUP
ENTER
MENU
PBC
or
F
button.
Example: When the
button is pressed
On DVD/DivX/SVCD/VCD/Audio CD/MP3, the speed changes as follows:
TUNING
TUNING
Whilst a disc is playing, press the
PLAY (Normal play)
TITLE
RETURN
2X
4X
8X
16 X
32 X
S
ENTER
3
4
5
6
7
8
EQUALIZER
9
PROG
0
MIC
LISTENING
ECHO
MODE
2
1
2
3
4
5
6
7
8
9
0
VOLUME
To locate the beginning of a chapter (track)
(skip)
You can move to other tracks with simple operations.
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 38).
Whilst a disc is playing, press the
or
button.
Use the
button to skip to the next chapter (track).
Use the
button to skip to the previous chapter (track).
On DVD, SVCD, VCD and Audio CD, press the
button to skip to the
beginning of the current track. Press the
button again (twice) to skip to
the beginning of the previous track/chapter.
Press the PLAY/PAUSE
playback.
button and reversed by the
button.
button to return to the normal
Notes:
On some discs, the search function is disabled.
On a DVD, search does not operate between titles.
On SVCD, VCD, audio CD and MP3, the search does not operate between tracks.
Whilst searching on a DVD, the sound is not heard and the subtitles do not appear.
Whilst searching on a SVCD or VCD or DivX, the sound is not heard.
When search is performed during the DVD playback, pictures may not be forwarded
or reversed in the search speed specified in this manual, depending on the disc or
the scene being played.
The search does not operate on JPEG discs.
To play in the desired order
(programmed play)
- Basic operation -
2
DVD Operation
The disc is forwarded by the
1
V
I
N
You can playback the desired tracks with titles or chapters in a specific order.
Maximum of 20 tracks can be programmed.
1
Whilst in the stop or playback mode, press
the PROG button.
Notes:
TV screen
Track 01/23
1
TT:
CH:
6
TT:
CH:
2
TT:
CH:
7
TT:
CH:
3
TT:
CH:
8
TT:
CH:
4
TT:
CH:
9
TT:
CH:
TT:
CH:
Exit
10
TT:
CH:
NEXT
5
Reset
Some discs do not display the chapter (track) and the skip feature is disabled.
On a DVD, skip does not operate between titles.
Alternatively, press the
or
button on the main unit.
P
01:18
Program : Track (01-23)
E
Continued to the next page
29
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Basic operation (continued)
2
Enter title or chapter number with the Direct Number buttons.
3
To specify title or track 1, enter “01” (must use 2 digits).
If you enter the wrong numbers, press , or 9 button to select the concerned
track and then re-enter the new numbers.
To clear all the numbers those entered, press 9 button to select “Reset” and
then press ENTER button.
TV screen
Press 9 button to select “Start” and then
press ENTER button to start playback the
programmed track(s).
1
TT: 01 CH: 02
6
TT:
CH:
2
TT: 02 CH: 02
7
TT:
CH:
3
TT:
CH:
8
TT:
CH:
4
TT:
CH:
9
TT:
CH:
TT:
5
Reset
CH:
Exit
10 TT:
Start
1
2
3
Select the title or chapter by pressing the 8 or 9 button and press the
ENTER button.
Enter the title or chapter number using the Direct Number buttons.
To select chapter 1: Press “0” and “1”.
To select chapter 12: Press “1” and “2”.
Playback starts after you complete enter the number(s) (bottom).
4
Repeat the above procedures from step 1.
- Basic operation -
Whilst in the playback mode, press the DIRECT button.
TV screen
CH:
NEXT
To change the programmed contents:
DVD Operation
In the playback mode
Press the DIRECT button to return to the actual size of image
(standard screen).
Programmed contents will be cleared when you perform the following
operations:
Notes:
To start playback from the desired point (direct play)
To play by specifying time (time search):
Switch the input or remove the discs.
Set to the stand-by mode.
To select and play the desired title and chapter:
In the stop mode
1
Direct play feature is disabled on some discs.
Some discs may not display the chapter number.
With DVDs, you can specify the desired point only in the current title and not in
another title.
You can playback from the desired point by specifying the time.
In the playback mode
1
Whilst in the playback mode, press the DIRECT button.
TV screen
Whilst in the stop mode, press the DIRECT button.
TV screen
TITLE 01/02 CHAPTER 001/002
2
Bitrate 15
2
3
Press 9 or 8 button to select “TT Time” then press the ENTER button.
Specify the time with the Direct Number buttons.
TT Time
Within 10 seconds, enter the title number first then only can enter
the chapter number by using the Direct Number buttons. You can
also press ; or : button at this time for title or chapter selection.
Example:
To select title or chapter 1: Press “01”.
To select title or chapter 12: Press “1” and “2”.
To select title or chapter 22: Press “2” and “2”.
01/01
Track
0:49:59
Disc Time
O:49:59
Track Time
Off
Repeat
Total Elapsed 0:03:42
1 :2 3 :4 0
To specify 1 hour 23 minutes and 40 seconds, enter “12340”.
If you enter the wrong number, start over from step 1.
Playback starts after you complete enter the number(s) (on the bottom of column).
4
Press the DIRECT button to return to the actual size of image
(standard screen).
Notes:
Some discs cannot play from the specified point.
Time search feature is disabled on some discs.
30
03/10/29
HTCN650DVW_AUS.fm
Useful operation
MUTE
1
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
PLAY PAUSE
Whilst a disc is playing, press the SLOW
select the desired speed.
TITLE
RETURN
1/4
2
3
4
5
6
7
8
1/8
1/16
PLAY (Normal play)
S
1/16
1
F
SLOW forward play
1/2
ENTER
button repeatedly to
On DVD, the speed changes as follows:
SETUP
MENU
PBC
E
You can slow down the playback speed.
1/8
1/4
1/2
SLOW reverse play
On SVCD/VCD/DivX, only forward play is possible and the speed changes as
follows:
9
EQUALIZER
PROG
1/2
0
MIC
LISTENING
ECHO
MODE
1/4
1/8
1/16
PLAY (Normal play)
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
2
Press the PLAY/PAUSE
playback.
button to return to the normal
Note:
On some discs, the slow-motion play functions are disabled.
- Useful operation -
PRESET
SLOW
Slow-motion play
OPEN CLOSE
DVD Operation
ON STAND-BY
HT-CN650DVW
V
I
N
P
E
31
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Useful operation (continued)
ON STAND-BY
PRESET
To change the angle
OPEN CLOSE
MUTE
You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
When “ ” is displayed in the upper right corner of the TV screen,
press the ANGLE button repeatedly to select the desired angle
number.
Notes:
SETUP
ENTER
MENU
PBC
The angle number is not displayed if angles are not recorded on the disc.
Refer to the manual of the disc as the operation may vary depending on the disc.
TITLE
RETURN
To zoom images (zoom)
You can magnify images during playback.
- Useful operation -
DVD Operation
1
2
4
5
7
8
1
3
6
9
EQUALIZER
Whilst a disc is playing, press the ZOOM button.
Each press of the ZOOM button cycles through the zoom settings as follows:
2X
3X
4X
1/2
PROG
0
MIC
LISTENING
ECHO
MODE
2
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
ZOOM
ANGLE
To shift the view and display the
desired part of a zoomed image,
press the 8, 9, ; or : button
repeatedly.
To return to normal view:
Press the ZOOM button repeatedly.
Notes:
Images may become distorted when zoomed.
Subtitles cannot be zoomed.
32
03/10/29
HTCN650DVW_AUS.fm
1/3
1/4
OFF
HT-CN650DVW
ON STAND-BY
1
OPEN CLOSE
E
Whilst a disc is playing, press the REPEAT button.
TV screen
PRESET
MUTE
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
MENU
PBC
CHAPTER
ENTER
F
REP 1
STOP
Each time the button is pressed, the repeat play mode changes in the following
order.
The repeat play mode changes as follows on DVD:
SETUP
MENU
PBC
Unit display
PRESET
TITLE
RETURN
“REP 1”
Repeat the currently
playing chapter.
TITLE”
“REP”
Repeat the currently
playing title.
ALL”
“REP”
Repeat the currently
playing disc.
“
CHAPTER”
“
“
S
2
3
4
5
6
7
8
9
EQUALIZER
PROG
0
MIC
1
2
3
4
5
6
7
8
9
The normal playback.
“REPEAT OFF”
No display
The repeat play mode changes as follows on SVCD/VCD:
LISTENING
“
TRACK”
“
ALL”
“REP 1”
Repeat the currently
playing track.
“REP”
Repeat the currently
playing disc.
0
ECHO
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
REPEAT
“REPEAT OFF”
A-B
No display
The normal playback.
The repeat play mode changes as follows on audio CD:
“SHUFFLE”
“SHUFF”
Repeat the currently
playing track.
Repeat the currently
playing disc.
Randomly play the track.
“REPEAT OFF”
No display
The normal playback.
“
TRACK”
“
ALL”
“REP 1”
“REP”
- Useful operation -
1
DVD Operation
ENTER
To play repeatedly (repeat play)
You can play a chapter (track) or a title repeatedly by specifying it during playback.
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 38).
I
N
P
MP3, DivX and JPEG are displayed when menu screen is “ON” (see page 40).
2
V
To return to the normal playback, press the REPEAT button
repeatedly until “REPEAT OFF” on TV screen.
Caution:
After performing repeat play, be sure to press the STOP button. Otherwise, the disc
will play continuously.
E
Note:
On some discs, the repeat play function is disabled.
33
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Useful operation (continued)
To play the contents between the specified
points repeatedly (A-B repeat)
To select a title from the top menu of the
disc
On a DVD with multiple titles, you can select a title from the top menu.
You can play the desired portion repeatedly by specifying it during playback.
1
1
Whilst a disc is playing, press the A - B button.
TV screen
Unit display
2
A
A-
- Useful operation -
DVD Operation
1 Drama
2 Action
3 SF
4 Comedy
Use the 8, 9, ; or : button to select a title, and then press the
ENTER button.
The selected title plays.
Or use the Direct Number buttons for some discs.
This registers the start point (A).
2
Example
Whilst in the stop or playback mode,
press the TITLE/RETURN button to
display the title menu.
Note:
Press the A - B button again to enter the end point (B).
The procedure shown here provides only general steps. The actual procedure for
using the title menu depends on the disc. See the disc jacket for details.
AB
A-B
This starts A-B repeat from the start point (A) to the end point (B).
3
Press the A - B button to return to the normal playback.
Notes:
A-B repeat play is disabled on some discs.
A-B repeat play for DVD is possible only within a title.
A-B repeat play for SVCD/VCD/CD/MP3/DivX is possible only within a track.
Some scenes on DVD may not allow A-B repeat play.
To select a subtitle or audio language from
the disc menu
You can select the desired subtitle or audio language and sound system [Dolby Digital
(5.1ch) or DTS sound] on your DVD if it has a disc menu.
1
2
Whilst in the stop or playback
mode, press the TITLE/RETURN
button to display the disc menu.
Example
1.Highlights
2.Start Movie
Press the 8, 9, ; or : button to change the setting and press the
ENTER button.
Or use the Direct Number buttons for some discs.
Note:
The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends on the disc. See the disc jacket for details.
34
03/10/29
HTCN650DVW_AUS.fm
Various settings
HT-CN650DVW
The subtitle language, audio language and TV type you select during playback are
reset each time you set this unit to the stand-by mode or switch the input. To keep your
own settings, set them in the setup menu (see page 20).
ON STAND-BY
PRESET
OPEN CLOSE
MUTE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
You can change the subtitle language or hide subtitles during playback.
Whilst a disc is playing, press the SUBTITLE
button repeatedly to select the desired subtitle SUBTITLE 01/03: ENGLISH
language.
Notes:
On some discs, the subtitle language cannot be changed.
If no subtitles are recorded on the disc, “ ” is displayed.
It may take time to switch the subtitle language to the selected one.
Subtitles cannot be hidden on some DVDs.
TITLE
RETURN
1
2
3
4
5
6
7
8
9
PROG
0
MIC
LISTENING
ECHO
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
- Various settings -
ENTER
EQUALIZER
AUDIO
S
SETUP
MENU
PBC
SUBTITLE
F
DVD Operation
FUNCTION
E
To change the subtitle language
V
I
N
P
E
35
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Various settings (continued)
To change the audio channel
DVD:
You can select an audio channel.
Current title number Total number of chapters
Whilst a disc is playing, press the AUDIO button repeatedly to select
the desired audio channel.
TT 01/01
DivX:
CH 01/12
Elapsed playback time
for the current title
The audio channel changes as follows on DVD:
Current chapter number
Total number of titles
Audio 1/3: AC3 5 CH English
TITLE ELAPSED
Audio 2/3: AC3 2 CH English
SINGLE ELAPSED
0:01:06
0:01:21
0:00:10
Elapsed playback time for the current track
SINGLE REMAIN
0:46:37
Remaining playback time for the current track
Elapsed playback time for the current title
Audio 3/3: DTS 5.1 CH English
DISPLAY OFF
TITLE REMAIN
1:43:28
The audio channel changes as follows on SVCD:
Audio 1
Audio 2
Audio 3
Audio 4
CHAPTER ELAPSED
0:00:16
Elapsed playback time for the current chapter
- Various settings -
DVD Operation
Remaining playback time for the current title
Note:
When P.B.C. is set to ON for SVCD or
VCD, total elapsed playback time and
total remaining playback time do not
appear.
The audio channel changes as follows on VCD:
CHAPTER REMAIN
Mono Left
Mono Right
Mix Mono
Stereo
0:03:17
Remaining playback time for the current chapter
DISPLAY OFF
Note:
The audio channel may not be changed on some discs.
To change the display on TV screen
SVCD/VCD/CD:
SINGLE ELAPSED
00:19
Elapsed playback time for the current track
SINGLE REMAIN
49:32
You can display or hide the operation indicators on the TV screen.
Remaining playback time for the current track
Whilst a disc is playing, press the OSD button. (The display is changed at each
press.)
TOTAL ELAPSED
00:52
Total elapsed playback time for the disc
TOTAL REMAIN
49:54
Total remain playback time for the disc
DISPLAY OFF
36
03/10/29
HTCN650DVW_AUS.fm
Video CD and Super Video CD playback
ON STAND-BY
STOP
Press the MENU/PBC button with
PBC ON.
The menu will appear on the TV and playback
will be paused.
2
Example
1
2
Select the desired menu number using the Direct Number buttons.
Playback starts.
After playback stops, the menu will reappear. Select the menu number to play.
OPEN CLOSE
PRESET
To interrupt playback:
PRESET
PRESET
1
MUTE
Press the PLAY/PAUSE
button.
To resume playback from the same point, press the PLAY/PAUSE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
button.
PLAY PAUSE
To stop playback:
Press the STOP button.
FUNCTION
SETUP
To stop the current operation and return to the menu:
ENTER
MENU
PBC
Press the TITLE/RETURN button.
TITLE
RETURN
TITLE
RETURN
To scroll the menu screen (menu screen with more than 1 page):
Press the PRESET
1
2
3
4
5
6
7
8
9
EQUALIZER
PROG
0
MIC
LISTENING
ECHO
MODE
or PRESET
button.
The P.B.C. function will not work in the following conditions.
1
2
3
4
5
6
7
8
9
Repeat/programmed/direct play or the skip feature is in operation.
Note:
The menu screen cannot be scrolled on some discs.
0
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
F
- Video CD and Super Video CD playback -
Page
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . .29
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
To zoom images (zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To play the contents between the specified points repeatedly (A-B repeat) . .34
To change the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
To change the audio channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
To play in the desired order (programmed play) . . . . . . . . . . . . . . . . . . . . . . . . .39
E
Playback of a video CD (super video CD)
with P.B.C.
Video CD and Super Video CD Operation
The following playback functions are the same as DVD or CD
operations.
HT-CN650DVW
S
V
I
N
P
E
37
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Video CD and Super Video CD playback (continued)
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
To play by specifying time (time search):
SETUP
Cancel the P.B.C. (playback control).
MENU
PBC
ENTER
MENU
PBC
1
TITLE
RETURN
During stop, press the DIRECT button.
DISC GO TO: _ _ :_ _
- Video CD and Super Video CD playback -
Video CD and Super Video CD Operation
FUNCTION
To start playback from the desired point (direct play)
PLAY PAUSE
1
2
3
4
5
6
7
8
9
EQUALIZER
PROG
0
MIC
LISTENING
ECHO
MODE
2
1
2
3
4
5
6
7
8
9
0
DIRECT
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
1
You can play a video CD (super video CD) with P.B.C. without activating the playback
control function.
In this case, the menu screen will not appear, and the disc will play in the same way
as a video CD (super video CD) without P.B.C.
2
Whilst in the stop or playback mode,
press the MENU/PBC button to
cancel the P.B.C. mode.
Press the PLAY/PAUSE
Enter minutes and seconds.
To specify 1 hour 23 minutes and 40 seconds, enter “8340”.
If you enter the wrong number, start over from step 1.
Playback starts (automatically) after you complete enter the number(s).
In the playback mode:
To play without activating the playback
control function
1
Specify the time with the Direct Number buttons.
Whilst in the playback mode, press the DIRECT button.
Bitrate 15
2
Press 9 or 8 button to select “Track Time” then press the ENTER
button.
3
Specify the time with the Direct Number buttons.
Track Time
Pro Off
button.
Playback starts.
Note:
Some video CDs (super video CDs) with P.B.C. cannot be played back when the P.B.C.
mode is off.
01/01
Track
0:49:59
Disc Time
O:49:59
Track Time
Off
Repeat
Total Elapsed 0:03:42
1 :2 3 :4 0
To specify 1 hour 23 minutes and 40 seconds, enter “12340”.
If you enter the wrong number, start over from step 1.
Playback starts (automatically) after you complete enter the number(s).
4
Press the DIRECT button to return to the actual size of image
(standard screen).
Notes:
Some discs cannot play from the specified point.
Time search feature is disabled on some discs.
Time search feature is not available on MP3 and JPEG discs.
38
03/10/29
HTCN650DVW_AUS.fm
CD operation
HT-CN650DVW
ON STAND-BY
PRESET
OPEN CLOSE
MUTE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
ENTER
MENU
PBC
1
2
4
5
7
8
6
1
2
4
5
Programmed contents will be cleared when you perform the following
operations:
Switch the input or remove the discs.
Set to the stand-by mode.
6
7
8
9
To start playback from the desired point (direct play)
3
To select and play the desired track:
0
9
EQUALIZER
Repeat the above procedures from step 1.
Sequential programming does not work if the disc disables programming or does
not have track information.
During programmed play, repeat play can be performed by pressing the REPEAT
button (see page 33).
TITLE
RETURN
3
To change the programmed contents:
Notes:
SETUP
PROG
0
MIC
ECHO
Whilst in the stop or playback mode, press the Direct Number buttons
to select the track number.
To select track 14: Press “1” and “4”.
LISTENING
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
TV screen
To play in the desired order
(programmed play)
1
To play by specifying time (time search):
1
Whilst in the stop or playback mode, press
the PROG button.
1
6
2
7
3
8
TV screen
DISC GO TO: _ _ :_ _
10
Exit
Next
2
1
04
2
10
3
12
6
7
8
4
9
5
Reset
10
Start
Exit
Specify the time with the Direct Number buttons.
Enter minutes and seconds.
To specify 1 hour 23 minutes and 40 seconds, enter “8340”.
If you enter the wrong number, start over from step 1.
Enter a track number with the Direct
Number buttons.
If you enter the wrong number, press 8 or 9
button to select the concerned track and then reenter the correct number.
To clear all the numbers those entered, press 9
button to select “Reset” and then press ENTER
button.
During stop or playback mode, press the DIRECT button
repeatedly until “DISC GO TO” appear on TV screen.
9
4
5
Reset
2
Unit display
SELECT TRACK: 14
You can playback the desired tracks in a specific order.
Maximum of 20 tracks can be programmed.
Next
E
Press 9 button to select “Start” and then press ENTER button to
start playback the programmed track(s).
F
S
V
- CD operation -
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . .29
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To play the contents between the specified points repeatedly (A-B repeat) . .34
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
3
CD, CD-R and CD-RW Operation
The following playback functions are the same as DVD or VCD
operations.
Direct play feature is disabled on some discs.
Some disc cannot play from the specified point.
Time search feature is disabled on some discs.
39
HTCN650DVW_AUS.fm
N
P
E
Notes:
03/10/29
I
HT-CN650DVW
MP3/WMA, JPEG and DivX disc operation
The following playback functions are the same as DVD or VCD operations.
ON STAND-BY
PRESET
- MP3/WMA, JPEG and DivX disc operation -
CD, CD-R and CD-RW Operation
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . 29
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
To zoom images (zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To play the contents between the specified points repeatedly (A-B repeat) . . 34
1
Whilst in the stop or playback mode, press the Direct Number
buttons or press DIRECT button and then enter the desired track
number(s).
TV screen
---/150
Total of tracks
OPEN CLOSE
MUTE
If the desired track is 25, press “2” and “5”.
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
PLAY PAUSE
ENTER
ENTER
2
3
4
5
6
7
8
Playback on the menu screen
You can play CD-R/RW recorded in the MP3/WMA and JPEG formats.
1
9
EQUALIZER
Press ENTER button to start playback.
Direct play feature is disabled on some discs.
Some discs cannot play from the specified point.
TITLE
RETURN
1
2
Notes:
SETUP
MENU
PBC
To select and play the desired track:
PROG
Load a disc containing MP3/WMA, JPEG and DivX files, the menu
screen appear.
0
MIC
ECHO
... Indicates folders.
LISTENING
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
... Indicates MP3 data.
... Indicates WMA data.
DIRECT
... Indicates JPEG data.
To start playback from the desired point
(direct play)
To play by specifying time (time search):
1
During playback, press the DIRECT button twice.
TV screen
GO TO _: _ _ : _ _
2
Specify the time with the Direct Number buttons.
Enter minutes and seconds.
To specify 1 hour 23 minutes and 40 seconds, enter “12340”.
If you enter the wrong number, start over from step 1.
You can check the total playback time of the track by refer to the page 36.
2
Press the 8, 9, ; or : button to select a folder or a track and press
the ENTER or PLAY/PAUSE
button.
Playback starts when you select a track.
When the format is JPEG, the next file is automatically displayed after a
whilst.
You can use the ; or : button to rotate the JPEG picture (see page 42).
Using the Direct Number buttons, you can open files or folders directly. Enter
the number on the right of the display.
Caution:
If you convert MP3 data to “audio CD” data to record on a CD-R/RW, play it as an audio
CD. The MP3 operation cannot be performed.
Notes:
Up to 7 characters can be displayed for a folder name and a track name.
Underlines, asterisks, and spaces may not be displayed.
This function is only visible when the unit is connected to TV.
40
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
ON STAND-BY
To play repeatedly (repeat play)
OPEN CLOSE
E
Repeat play on the DivX menu screen:
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
FUNCTION
MENU
PBC
Whilst a disc is playing, press the REPEAT button.
Each time the button is pressed, the repeat play mode changes in the following order.
PRESET
TV screen
Unit display
“SHUFFLE”
“SHUFF”
Randomly repeat play the
tracks.
“SINGLE”
No display
No repeat the currently
playing track.
“REPEAT ONE”
“REP 1”
Repeat the currently
playing track.
“REPEAT ALL”
“REP”
Repeat all the tracks.
SETUP
ENTER
MENU
PBC
TITLE
RETURN
1
2
3
4
5
6
7
8
“REPEAT OFF”
No display
9
EQUALIZER
PROG
PROG
Repeat play on the JPEG menu screen:
Condition A
0
MIC
LISTENING
ECHO
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
You can play images after select each folder inside the disc. The playback will stop after complete playback all the images in the currently playing folder.
To perform repeat play, press the REPEAT button whilst in the playback mode. Each
time the button is pressed, the play mode changes in the following order.
ZOOM
REPEAT
TV screen
Unit display
“SHUFFLE”
“SHUFF”
“SINGLE”
No display
“REPEAT ONE”
“REP 1”
“REPEAT ALL”
“REP”
About folder playback order:
When the MP3/WMA menu screen is on, tracks are played in the following order.
Playback is performed in the order of 1 to 11 in the following example.
ROOT
Folder
3
4
5
1
Repeat play is cancelled.
6
7
2
Tracks on some discs cannot be played in order.
Track
“REPEAT OFF”
No display
Randomly repeat play the
tracks (images).
No repeat the currently
playing tracks (images).
Repeat the currently
playing track (image).
Repeat play all the tracks (images)
in the currently playing folder.
Repeat play is cancelled.
Condition B
8
9
10
11
F
- MP3/WMA, JPEG and DivX disc operation -
MUTE
CD, CD-R and CD-RW Operation
PRESET
You can continuous play all images in the disc. Whilst in the main menu screen, press
the PROG button. All the image files will be viewed on the TV screen (folder off).
Playback will stop after complete playback all the images in the disc.
To perform repeat play, press the REPEAT button whilst in the playback mode. Each
time the button is pressed, the play mode changes in the following order.
Continued to the next page
HTCN650DVW_AUS.fm
V
I
N
P
E
41
03/10/29
S
MP3/WMA, JPEG and DivX disc operation (continued)
TV screen
Unit display
“SHUFFLE”
“SHUFF”
“SINGLE”
No display
“REPEAT ONE”
“REP 1”
“REPEAT ALL”
“REP”
“REPEAT OFF”
No display
Randomly repeat play the
tracks (images).
No repeat the currently
playing tracks (images).
Repeat the currently
playing track (image).
Repeat play all the tracks
(images) in the disc.
Rotating a picture
You can rotate images.
During playback, press the ; or : button.
The image rotates as shown below.
: button : 90˚ rotation in a clockwise direction.
Repeat play is cancelled.
Notes:
- MP3/WMA, JPEG and DivX disc operation -
CD, CD-R and CD-RW Operation
HT-CN650DVW
To view back the folders, press the PROG button whilst in the main menu screen.
To return to the main menu screen whilst playback, press STOP ( ) button.
Then, press MENU/PBC button.
Repeat play on the MP3/WMA menu screen:
Condition A
You can play songs after select each folder inside the disc. The playback will stop after
complete playback all the songs in the currently playing folder.
To perform repeat play, press the REPEAT button whilst in the playback mode. Each
time the button is pressed, the play mode changes in the following order.
TV screen
Unit display
“SHUFFLE”
“SHUFF”
“SINGLE”
No display
“REPEAT ONE”
“REP 1”
“REPEAT FOLDER”
“REP”
“FOLDER”
No display
Randomly repeat play the
tracks (songs).
No repeat the currently
playing tracks (songs).
Repeat the currently
playing track (song).
Repeat play all the tracks (songs)
in the currently playing folder.
Repeat play is cancelled.
Condition B
You can continuous play all songs in the disc. Whilst in the main menu screen, press
the PROG button. All the song files will be viewed on TV screen (folder off).
Playback will stop after complete playback all the songs in the disc.
To perform repeat play, press the REPEAT button whilst in the playback mode. Each
time the button is pressed, the play mode changes in the following order.
TV screen
Unit display
Randomly repeat play the
“SHUFFLE”
“SHUFF”
tracks (songs).
No repeat the currently
“SINGLE”
No display
playing tracks (song).
Repeat the currently
“REPEAT ONE”
“REP 1”
playing track (song).
Repeat play all the tracks
“REP”
“REPEAT FOLDER”
(songs) in the disc.
“FOLDER”
No display
; button : 90˚ rotation in an anti-clockwise direction.
Simultaneously playback the MP3/WMA and
JPEG
You can enjoy to see images of JPEG files whilst listening to the musics of MP3 at the
same time.
1
2
3
4
5
Playback the desired songs.
Press ; button to return to the main menu.
Select JPEG folder using 8 or 9 button.
Select the images or pictures those you want to view.
Press the ENTER button.
Note:
Whilst playing the images, you cannot select the MP3/WMA folder or files.
Repeat play is cancelled.
Note:
To view back the folders, press the PROG button whilst in playback or stop mode.
42
03/10/29
HTCN650DVW_AUS.fm
USB memory device operation
1
2
Plug in USB memory device to unit and wait for a statement “Press
FUNCTION to select device” appear on the TV screen. After that
press FUNCTION button until “WAITING” appear on TV screen and
main unit.
After menu screen appear, press 8, 9, ; or : button to select a
folder or a track and then press the ENTER or PLAY/PAUSE
button.
... Indicates folders.
... Indicates MP3 data.
... Indicates WMA data.
... Indicates JPEG data.
Playback starts when you select a track.
When the format JPEG, the next file is automatically displayed after a whilst.
Using the Direct Number buttons, you can open file or folder directly.
You can use the ; or : button to rotate the JPEG picture (see page 42).
The following playback functions are the same as DVD or VCD
operation.
Page
Fast forward/Fast reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
To zoom images (zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To play the contents between the specified
points repeatedly (A - B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Notes:
SHARP will not be held liable for the loss of data whilst the USB memory device is
connected to the audio system.
The USB memory’s format support FAT16 or FAT32.
SHARP cannot guarantee that all USB memory devices will work on this audio
system.
This USB memory cannot be operated via USB hub.
If recorded file is not displayed in the main menu, it means that this format is not
supported.
The USB terminal in this unit is not intended for a PC connection but is used for
music, video and image streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will take for the data
to be read.
Some USB multi-reader devices may not work correctly with the USB terminal.
F
S
- USB memory device operation -
You can play USB recorded in JPEG and MP3/WMA formats.
E
To remove USB memory device
1 Press the STOP L button.
2 Disconnect USB memory device from the terminal (unit).
3 Close terminal door.
USB Memory Device Playback
Playback on USB memory device
HT-CN650DVW
HTCN650DVW_AUS.fm
I
N
P
E
43
03/10/29
V
HT-CN650DVW
Listening to the radio
Manual or Auto tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select tuner mode.
L
LS
3
ON STAND-BY
ON STAND-BY
OPEN CLOSE
PRESET
PRESET
SLOW
- Listening to the radio -
Radio Operation
PRESET
MUTE
PLAY PAUSE
OSD
TUNING
STOP
TUNING
TUNING
FUNCTION
ENTER
1
2
4
7
TITLE
RETURN
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
STEREO VCD MP3
Press the TUNING
or TUNING
tune in to the desired station.
Manual tuning:
button for a few seconds to
button as many times as required to tune
When an FM stereo broadcast is received.
3
5
TRK
DIGITAL
Pro Logic
When the TUNING
or TUNING
button is pressed for 0.5 seconds or
more, scanning will start automatically and the tuner will stop at the first
receivable broadcast station.
When radio interference occurs, auto scan tuning may stop automatically at
that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING
or TUNING
button again.
SETUP
MENU
PBC
TITLE
R
RS
Auto tuning:
TUNING
FUNCTION
S
Press the TUNING
or TUNING
in the desired station.
PRESET
SLOW
C
1
2
3
4
5
6
7
8
9
“STEREO” will appear.
6
8
L
9
EQUALIZER
PROG
LS
0
LISTENING
ECHO
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
S
TITLE
R
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
DIGITAL
Pro Logic
RS
STEREO VCD MP3
KHz
MHz
FM stereo receiving indicator
0
MIC
C
If the FM reception is week, press the AUDIO button to extinguish the “STEREO”
indicator. The reception changes to monaural and the sound becomes clearer.
Note:
You can select the sound mode by refering the page 47.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Note:
This product can receive FM stereo/ FM monaural broadcasts.
44
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
To recall a memorised station
1
2
3
Perform steps 1 - 3 in “Manual or Auto tuning” on page 44.
Press the PROG button to enter the preset tuning saving mode.
Press the Direct Number buttons to
select the preset channel number.
TRK
PRESET
CHP
SLEEP
RS
KHz
MHz
TITLE
TRK
STEREO
VCD MP3
CHP
PROG
SLEEP
or PRESET
button to select the desired
F
REPEAT 1 A - B
TITLE
R
KHz
MHz
Preset channel
You can use the Direct Number buttons.
TRK
PRESET
CHP
PROG
DIGITAL
Pro Logic
RS
STEREO VCD MP3
SLEEP
REPEAT 1 A - B
KHz
MHz
Frequency and frequency band
Using the Auto Station Programme Memory
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically search and store for
stations. Up to 40 stations can be stored.
Store the stations in memory, in order, starting with preset channel 1.
TITLE
TRK
PRESET
CHP
SLEEP
REPEAT 1 A - B
DIGITAL
Pro Logic
KHz
MHz
STEREO VCD MP3
TITLE
DIGITAL
Pro Logic
STEREO VCD MP3
5
Press the PRESET
station.
DIGITAL
Pro Logic
REPEAT 1 A - B
Example:
To select preset channel 1: Press “1”.
To select preset channel 12: Press “1” and “2”.
To select preset channel 22: Press “2” and “2”.
Press the ENTER button to save the
station to memory.
Press the FUNCTION button to select FM mode.
R
TITLE
DIGITAL
Pro Logic
STEREO VCD MP3
4
1
2
E
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorised will be
erased.
1
2
3
Press the ON/STAND-BY button to turn power on.
Press the FUNCTION button to select tuner mode.
Press PROG button for more than 3 seconds.
1. Station scanning will start from 87.5 MHz to 108.0 MHz.
2. Every station that found will be stored in memory.
3. After scanning, it will stop at the first memory station (at the lowest frequency).
Note:
S
- Listening to the radio -
You can store 40 FM stations in memory and recall them at the push of a button.
(Preset tuning)
Radio Operation
Memorising a station
V
I
N
You cannot stop the ASPM operation before it is complete.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
P
E
45
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Enjoying various sounds
DTS or Dolby Digital Surround
DTS (Digital Theatre Systems)
Enjoy DTS or Dolby Digital sound in 5.1 or 2-channel.
Whilst a disc is playing, press the LISTENING button repeatedly to
select the desired listening mode.
Digital input from discs
with this trademark
One of the digital audio systems for theatrical use. As the sound quality is
emphasised, you can enjoy the realistic sound effect in the home theatre system.
5.1ch surround
sound:
Example:DTS
Unit display
TV screen
DTS 5.1
Dolby Digital
- Enjoying various sounds -
Advanced Features
The DTS indicator will light up when the disc recorded in DTS is played back.
DIGITAL
2-ch stereo sound:
DTS STEREO
STEREO
Digital input from discs
with this trademark
One of the digital audio systems for theatrical use. You can enjoy the stereophonic
effect in the home theatre system.
The
DIGITAL indicator will light up when the disc recorded in
played back.
5.1ch surround sound:
Enjoy 5.1-channel surround sound.
Centre speaker
Front speaker (left)
Front speaker (right)
DIGITAL is
Subwoofer
Dolby Pro Logic
Surround
speaker (left)
Pro Logic
Inputs
from
stereorecorded discs, video
tapes, etc.
Surround
speaker (right)
2-ch stereo sound:
Enjoy 2-channel stereo sound.
Front speaker (left)
You can produce 2-channel stereo signals on audio CD, video CD, or AUX from all
the speakers.
Subwoofer
The
Pro Logic indicator will light up when the Dolby Pro Logic surround is
activated.
46
03/10/29
HTCN650DVW_AUS.fm
Front speaker (right)
HT-CN650DVW
Dolby Pro Logic Surround
You can produce 2-channel stereo signals on tuner, audio CD, video CD, or AUX from
all the speakers, or switch to 2-channel.
Whilst a disc is playing, press the LISTENING button repeatedly to
select the desired listening mode.
Unit display
You can switch the audio whilst playing the disc of multiple types (Dolby Digital,
DTS, etc.) (page 36).
When the listening mode is set to stereo, the same monaural sound is reproduced
in both the right and left channels.
TV screen
PLII MOVIE
EQUALIZER
Pro Logic
L
LS
C
S
TITLE
R
TRK
PRESET
STEREO V
3
4
5
6
7
8
CHP
F
9
EQUALIZER
PROG
LISTENING
0
MIC
LISTENING
ECHO
MODE
S
VOLUME
P
STEREO
DIGITAL
Pro Logic
RS
2
MP3
STEREO
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
When using AUX, the information does not appear on the TV screen.
To change the sound effect (Equaliser)
Dolby Pro Logic surround:
You can produce sound from all the speakers.
You can change the sound effect (Equaliser), press EQUALIZER button repeatedly to
cyclicity select the preset equaliser mode: JAZZ → ROCK → POP → CLASSIC.
Centre speaker
Front speaker (left)
Front speaker (right)
Subwoofer
Surround
speaker (left)
Surround
speaker (right)
2-ch stereo sound:
Enjoy 2-channel stereo sound.
Front speaker (left)
Front speaker (right)
- Enjoying various sounds -
2-ch stereo sound:
1
Advanced Features
Dolby Pro Logic
surround:
E
Notes:
V
I
N
Subwoofer
P
Speaker indicators:
Speaker indicators show speakers in use.
1
Left Front Speaker Indicator
2
Centre Speaker Indicator
3
Right Front Speaker Indicator
Left Surround Speaker Indicator
4
5
Subwoofer Indicator
6
Right Surround Speaker Indicator
1
L
2
C
3
R
E
DIGITAL
Pro Logic
LS
S
RS
4
5
6
STEREO
47
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Adjusting channel delay/speaker level
When speakers cannot be placed at equal distances, change speaker settings to
enjoy surround effects as if they were equally placed.
Example:
If the centre speaker is closer to the listening position than others by about 90 cm, set
as follows.
Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1
ms corresponds to 30 cm. Sound is heard as if all the speakers were equally placed.
Centre
speaker
Front
speaker (left)
Front
speaker (right)
110 cm
Advanced Features
- Adjusting channel delay/speaker level -
Subwoofer
Channel delay setting
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button to select DVD mode.
3 Press the SETUP button.
4 Press the / or - button to select “AUDIO SETUP PAGE” and then
press the ENTER button.
5
200 cm
Press the 8 or 9 button to select
“CHANNEL DELAY” and then
press the ENTER button.
090 cm
10 cm
Surround
speaker (right)
Surround
speaker (left)
1 The centre speaker is closer to the listener than others. In “Speaker level setting”,
adjust the centre speaker level (see page 49).
2 In “Test tone”, check the sound from each speaker (see page 49).
Center
6
7
8
Press the 8 or 9 button to select the desired speaker type.
Press / or - button to select the desired distance.
To complete the channel delay setting, press the SETUP button.
ON STAND-BY
ON STAND-BY
PRESET
OPEN CLOSE
MUTE
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
SETUP
FUNCTION
FUNCTION
SETUP
ENTER
MENU
PBC
TITLE
RETURN
ENTER
1
2
3
4
5
6
7
8
EQUALIZER
9
PROG
0
MIC
LISTENING
ECHO
MODE
Audio Setup Page
Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
MODE
VOLUME
48
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Test tone
Speaker level setting
You can check the sound output from the speakers.
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
Press the FUNCTION button to select DVD mode.
Press the SETUP button.
Press the ENTER button.
Press the 9 button to select “SPEAKER SETUP” and then press
the ENTER button.
6
Press the - button and use the 8 or 9 button to select “TEST
TONE ON”.
7
Press the ENTER button.
1
2
3
4
Surround speaker (left)
8
Within 3 seconds, press the VOLUME + (VOLUME 8) or VOLUME –
(VOLUME 9) button to adjust the level.
FRONT LEFT
CENTRE
FRONT RIGHT
SURROUND LEFT
SURROUND RIGHT
SUBWOOFER
Front speaker (right)
Surround speaker (right)
To end the test tone, press the SETUP button.
Notes:
Press the MODE button repeatedly to select the desired speaker.
Speaker type
Centre speaker
When the listening mode is “STEREO”, only the front speakers can be checked.
If there is a disc in the tray, you cannot check the sound output.
F
Press the FUNCTION button to select DVD mode.
You can adjust the level at 1 dB intervals.
To adjust the levels of other speakers, repeat the operation from step 3.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
Front speaker (left)
Press the ON/STAND-BY button to turn the power on.
Front speaker (Left)
Centre speaker
Front speaker (Right)
Surround speaker (Left)
Surround speaker (Right)
Subwoofer
Level range
- 10 DB to + 10 DB
- 10 DB to + 10 DB
- 10 DB to + 10 DB
- 10 DB to + 10 DB
- 10 DB to + 10 DB
- 10 DB to + 10 DB
Default
setting
0 DB
0 DB
0 DB
0 DB
0 DB
0 DB
Notes:
The speaker type appears followed by “TREBLE”, “BASS” and “MASTER VOLUME”.
For details on “TREBLE” and “BASS”, see page 26.
The volume can still be adjusted even after “MASTER VOLUME” disappears.
When the listening mode is “STEREO”, you can change the level of the front
speakers and the subwoofer.
If subwoofer sound is distorted, lower the subwoofer level.
S
Advanced Features
Press the ON/STAND-BY button to turn the power on.
- Adjusting channel delay/speaker level -
1
2
3
4
5
E
V
I
N
P
E
49
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Sleep operation
Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
ON STAND-BY
ON STAND-BY
PRESET
OPEN CLOSE
MUTE
1
2
Playback the desired sound source.
Press the SLEEP button.
TV screen
PRESET
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
Unit display
Sleep 120mins
SLEEP
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will
decrease as follows.
SETUP
ENTER
MENU
PBC
TITLE
RETURN
90 MINS
- Sleep operation -
Advanced Features
FUNCTION
1
2
3
4
5
6
7
8
9
EQUALIZER
PROG
0
SLEEP
MIC
LISTENING
ECHO
MODE
60 MINS
120 MINS
3
30 MINS
OFF
Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
To cancel the sleep operation:
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
To cancel the sleep operation, press the SLEEP button until “OFF” appears on the
display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
50
03/10/29
HTCN650DVW_AUS.fm
Playing karaoke
HT-CN650DVW
6
E
Adjust microphone volume by pressing MIC button and then press
VOLUME + or VOLUME – button.
To obtain the desired musical pitch (key
control)
F
Press the Key Control button to obtain the desired musical pitch.
ON STAND-BY
PRESET
OPEN CLOSE
MUTE
SLOW
PLAY PAUSE
OSD
TUNING
STOP
TUNING
TITLE
RETURN
1
2
3
4
5
6
7
8
9
EQUALIZER
PROG
0
LISTENING
MODE
VOLUME
AUDIO
SUBTITLE
ZOOM
ANGLE
SLEEP
DIRECT
REPEAT
A-B
Playing karaoke
You can enjoy karaoke to DVDs, video CDs, audio CDs and MP3 Discs by connecting
separately available microphone to this unit.
2
Set the MIC VOLUME control to “MIC 0” by pressing MIC button
and then press VOLUME – button to protect the speakers from
shock noise and to avoid disturbing noises.
Connect the microphone to the MIC 1 or MIC 2 socket or both
sockets for enjoying duets.
Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
Use a standard plug adaptor when using a microphone with a 3.8 mm (1/8")
diameter plug.
3
4
5
Press the # button to raise the key.
Key + 01...............+ 16
Press the
Key + 00
S
button to return to the normal key.
Notes:
The sound is produced in 2-channel stereo automatically whilst playing karaoke.
Sound of the playback source can be switched (see page 36).
The karaoke mode is disabled in the tuner function (FM) or during AUX functions.
When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone volume.
If an extremely sensitive microphone is used, howling may be generated.
Unidirectional microphone is more appropriate for vocal use.
When you connect or disconnect a microphone, the sound is muted for a few seconds.
If squealing occurs:
Reduce the microphone volume.
Change the direction of the microphone.
Reduce the volume of the main unit.
Move the microphone away from the speakers.
Caution:
- Playing karaoke -
MENU
PBC
1
Key 01............... 16
SETUP
ENTER
ECHO
button to lower the key.
Advanced Features
FUNCTION
MIC
Press the
PRESET
When not using the microphone, remove it from the MIC socket.
When connecting or disconnecting the microphone, set the MIC VOLUME control
to MIN.
ECHO
- Press ECHO to turn “ECHO” on. To toggle the echo level using the VOLUME +
or VOLUME − button.
ECHO
ECHO 1
ECHO 2
ECHO 3
ECHO 4
ECHO 5
V
I
N
P
ECHO 6 ..... ECHO 10
Press the ON/STAND-BY button to turn the power on.
Load a karaoke disc and play it.
E
Adjust the volume of the audio source using the VOLUME +
(VOLUME 8) or VOLUME – (VOLUME 9) button.
51
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service
technician.
If something is wrong with this product, check the following before calling your
authorised SHARP dealer or service centre.
General
Symptom
No sound is heard.
References
- Troubleshooting chart -
The sounds from speakers
are not well balanced.
Noise is heard during
playback.
When a button is pressed,
the unit does not respond.
Interference or noise occurs
on the TV image.
The power is not turned on.
No images are displayed.
Possible cause
Is the volume level set to “0”?
Are the speaker wires
disconnected?
Are the speaker leads connected to
the wrong channels?
Is each speaker placed at the same
distance from the listener?
Are speakers adjusted to the same
level?
Move the unit away from any
computers or mobile phones.
Set this unit to the power stand-by
mode and then turn it back on.
Is the unit placed near TV with
internal aerial? Use an external
aerial.
Is the unit unplugged?
The protection circuit may be
activated. Unplug and plug in the
power lead again after 15 minutes or
more.
Is TV turned on?
Is the input of TV switched?
Reference
page
P. 26
P. 13
P. 13
P. 18
P. 49
−
P. 53
P. 13
P. 20
P. 53
P. 19
P. 19
DVD player
Symptom
Even though a disc has
been loaded, “NO DISC” is
displayed.
Playback sounds are
skipped.
Possible cause
Is the disc loaded upside down?
Is the disc very dirty?
Does the disc satisfy the standards?
Is the unit located near excessive
vibrations?
Has condensation formed inside the
unit?
The control buttons do not Is the disc very dirty?
function. Music or video
Does the disc satisfy the standards?
playback is interrupted.
Is the unit located near excessive
vibrations?
Has condensation formed inside the
unit?
Pictures and sound are
Is the disc very dirty?
skipped.
Is the unit located near excessive
vibrations?
Has condensation formed inside the
unit?
The unit does not operate
Is a disc other than a DVD (region
even if the power is on.
number on the back of the unit or
ALL), SVCD, VCD, audio CD, CD-R
or CD-RW loaded?
Image cannot be played
Are the video and audio cables
back. (Sound is not heard.)
connected improperly?
Is a disc other than a DVD (region
number on the back of the unit or
ALL), SVCD, VCD, audio CD, CD-R
or CD-RW loaded?
Is the disc very dirty?
Is the disc loaded upside down?
Clean the optical pickup if it is dirty.
Is the TV input set to “VIDEO 1/
VIDEO 2”, etc.?
Is the unit turned on?
52
03/10/29
HTCN650DVW_AUS.fm
Reference
page
−
−
−
−
P. 53
−
−
−
P. 53
−
−
P. 53
P. 4
P. 14 - 17
P. 4
−
−
−
P. 27
P. 19
HT-CN650DVW
Tuner
If trouble occurs
The preset channel cannot
be recalled.
Is the unit placed near the TV or
computer?
Is the FM aerial placed properly?
Move the aerial away from the AC
power lead or the unit if located
near.
Did you remove the plug from the
wall socket, or did a power failure
occur?
Set the channel again.
Reference
page
−
If such a problem occurs, do the following:
P. 13
P. 45
Possible cause
The remote control does not Is the battery polarity respected?
operate properly.
Are the batteries dead?
Is the distance or angle incorrect?
Are there any obstructions in front of
the unit?
Is the remote control sensor
exposed to strong light (inverter
fluorescent light, direct sunlight,
etc.)?
Is the remote control for another
equipment used simultaneously?
The unit cannot be turned on Is the AC power lead of the unit
with the remote control.
plugged in?
Are the batteries inserted?
Reference
page
P. 19
−
P. 19
−
P. 19
−
P. 17
F
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and plug in the unit, and
then turn the power on.
When the protection circuit is activated:
When short-circuiting the speaker leads or turning the volume too high, the protection
circuit may be activated and the system may enter the stand-by mode.
Unplug the unit and, after 15 minutes or more, plug it in again.
Turn down the volume if set too high.
Before transporting the unit
Remote control
Symptom
1
2
1 Press the ON/STAND-BY button to turn the power on.
OPEN/CLOSE button to open the disc tray.
2 Press the
Remove the disc inserted in the unit.
3 Press the
OPEN/CLOSE button to close the disc tray.
4 Press the ON/STAND-BY button to enter the stand-by mode, and
then unplug the AC power lead from the wall socket.
Condensation
Sudden temperature changes, storage or operation in an extremely humid
environment may cause condensation inside the cabinet (laser pickup, etc.) or on the
transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.
S
References
The radio makes unusual
noises continuously.
Possible cause
- Troubleshooting chart -
Symptom
E
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
V
I
N
P
P. 19
E
53
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Error indicators and warnings Maintenance
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Unit display
TITLE
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
References
- Error indicators and warnings / Maintenance -
TITLE
TRK
PRESET
CHP
PROG
SLEEP
REPEAT 1 A - B
KHz
MHz
3
TV screen
NO DISC
WRONG REGION
Meaning
The disc is not loaded.
The disc is scratched or dirty and cannot be
recognised.
The disc is loaded up-side down.
The region number of the DVD is not the number on
the back of the unit or “ALL”.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
Meaning
The disc is not loaded.
The disc is scratched or dirty and cannot be
recognised.
The disc is loaded up-side down.
The region number of the DVD is not the
number on the back of the unit or “ALL”.
54
03/10/29
HTCN650DVW_AUS.fm
Specifications
Power source
Power consumption
Dimensions
Weight
Audio input terminals
Audio output
terminals
Video output
terminals
HDMI output terminal
Karaoke Mic terminal
AC 220 - 240 V ~ 50/60 Hz
Power on: 120 W
Width: 430 mm (17-1/8")
Height: 55 mm (2-3/8")
Depth: 365 mm (14-3/8")
4.1 kg (8.6 lbs.)
Analogue input (IN 1): RCA type × 1 pair (L/R)
Analogue input (IN 2): RCA type × 1 pair (L/R)
Analogue output (OUT): RCA type × 1 pair (L/R)
S-video output: S-terminal × 1
Video output: RCA type × 1
Component video output
HDMI socket
6.3 mm × 2
Amplifier
Output power
Front speakers:
RMS: 125 W (62.5 W + 62.5 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 125 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 125 W (62.5 W + 62.5 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 125 W (10 % T.H.D., 100 Hz)
Signal system
PAL/NTSC colour
Supported disc types DVD (with the same region number on the back of the unit
or ALL), SVCD, VCD, audio CD, CD-R, CD-RW, MP3
Video signal
Horizontal resolution: 525 lines
S/N ratio: 56 dB
Audio signal
Frequency characteristics Linear PCM DVD:
20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
S/N ratio
CD: 65 dB (1 kHz)
Dynamic range
Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic distortion
0.2 % maximum
ratio
USB
Class
Mass storage class
Support file
MP3/WMA (do not support DRM file)
Format support
FAT 16 or FAT 32
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Support version
1.1 and 2.0 (Full speed)
Other
Not support ID3-tag
F
S
V
- Specifications -
General
E
DVD player
References
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
HT-CN650DVW
I
N
P
E
55
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
Specifications (continued)
Centre speaker
Tuner
Frequency range
FM: 87.5 - 108 MHz
Front speakers
Full range speaker system (magnetic shield)
7.6 cm (3") speaker
2.0 cm (5/64") super tweeter
Maximum input power 100 W
Impedance
4 ohms
Dimensions
Width: 95 mm (3-47/64")
Height: 150 mm (5-29/32")
Depth: 95 mm (3-47/64")
Weight
0.7 kg (1.5 lbs.)/each
- Specifications -
References
Type
Surround speakers
Type
Full range speaker system
7.6 cm (3") speaker
2.0 cm (5/64") super tweeter
Maximum input power 100 W
Impedance
4 ohms
Dimensions
Width: 95 mm (3-47/64")
Height: 150 mm (5-29/32")
Depth: 95 mm (3-47/64")
Weight
0.5 kg (1.1 lbs.)/each
Type
Full range speaker system (magnetic shield)
7.6 cm (3") x 2 speakers
2.0 cm (5/64") super tweeter
Maximum input power 180 W
Impedance
8 ohms
Dimensions
Width: 250 mm (9-27/32")
Height: 95 mm (3-47/64")
Depth: 85 mm (3-11/32")
Weight
1.1 kg (1.5 lbs.)
Subwoofer
Type
Subwoofer system
16.5 cm (6-1/2") subwoofer
Maximum input power 180 W
Impedance
8 ohms
Dimensions
Width: 182 mm (7-11/64")
Height: 375 mm (14-49/64")
Depth: 355 mm (13-63/64")
Weight
4.2 kg (9.2 lbs.)
56
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
MEMO
E
F
S
V
I
N
P
E
57
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
MEMO
58
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
E
F
FOR LOCATION ENQUIRIES WITHIN
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
NEW ZEALAND
REGARDING YOUR LOCAL
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
VISIT OUR WEBSITE AT
www.sharp.net.au
www.sharp.net.nz
OR CALL SHARP CUSTOMER CARE
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
1300 135 022
V
I
SHARP CUSTOMER SERVICES
N
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
(LOCAL CALL COST APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
S
SHARP CORPORATION OF NEW ZEALAND LIMITED
P
SPform019(JUNE 2004)
E
59
03/10/29
HTCN650DVW_AUS.fm
HT-CN650DVW
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the
date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
OF
N
TIO ED
A
T
I
OR IM ive
RP D L Dr
CO LAN ston d
P A n n
AR ZE Joh kla
SH EW go Auc
N Hu se,
OF
59 enro
N
D
P
O
TI ITE
A
M
R LI
O
.
RP TY 405
8
CO IA P 39 rive 214
0
P
L
R A 03 d D W
A
R
o
S
0
SH UST 40 gwo d N
A BN ntin oo
A Hu ingw
1 unt
H
(J
4
Retailer
rm
01
Date of Purchase
SP
fo
Model No.
Serial No.
U
N
E
20
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
04
IMPORTANT
DO NOT RETURN THIS DOCUMENT TO SHARP
)
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
92LYOM20009705
07D R MW 2
60
03/10/29
HTCN650DVW_AUS.fm