Sharp CD-MPX870H Specifications

MINI KOMPONENTEN SYSTEM
MINI-CHAÎNE
SISTEMA MINI
MINI KOMPONENT SYSTEM
MINI SISTEMI
MINI SYSTEEM
SISTEMA DE MINI COMPONENTE
MINI COMPONENT SYSTEM
MODELL
MODÈLE
MODELO
MODELL
Das Mini Komponenten System CD-MPX870H besteht aus CD-MPX870H
(Hauptgerät) und CP-MPX870H (Lautsprechersystem).
Mini-chaîne CD-MPX870H composée de CD-MPX870H (appareil principal) et
de CP-MPX870H (enceinte acoustique).
CD-MPX870H Sistema de Mini Componente consistente en CD-MPX870H
(unidad principal) y CP-MPX870H (sistema de altavoces).
CD-MPX870H Minikomponentsystem bestående av CD-MPX870H (huvudenhet) och CP-MPX870H (högtalarsystem).
CD-MPX870H Mini Component System, composto dal CD-MPX870H (unità
principale) e dal CP-MPX870H (sistema di diffusori).
CD-MPX870H Mini Component Systeem bestaande uit CD-MPX870H (hoofdunit) en CP-MPX870H (luidsprekersysteem).
CD-MPX870H Mini Component System consistindo de CD-MPX870H (unidade
principal) e CP-MPX870H (sistema de alto-falante).
CD-MPX870H Mini Component System consisting of CD-MPX870H (main unit)
and CP-MPX870H (speaker system).
MODELLO
MODEL
MODELO
MODEL
CD-MPX870H
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
OPERATION MANUAL
DEUTSCH
FRANÇAIS
ESPAÑOL
Consulte las páginas i a x y S-1 a S-44.
SVENSKA
ITALIANO
Hänvisa till sidorna i till x och V-1 till V-44.
Leggere le pagine i a x e I-1 a I-44.
NEDERLANDS
PORTUGUÊS
Downloaded From DvDPlayer-Manual.com Sharp Manuals
Siehe Seiten i bis x und D-1 bis D-44.
Se reporter aux pages i à x et F-1 à F-44.
Raadpleeg de bladzijden i t/m x en N-1 t/m N-44.
Favor consultar as páginas i a x e P-1 a P-44.
ENGLISH
Please refer to pages i to x and E-1 to E-44.
9/5/06
CD-MPX870_FRONT.fm
TINSZA165AWZZ
CD-MPX870H
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
SPECIAL NOTES
● Dichiarazione di conformità
La società SHARP ELECTRONICS EUROPE GmbH dichiara
che il prodotto SHARP MINI SISTEMI CD-MPX870H è costruito
in conformità alle prescrizioni del D.M.n˚548 del 28/8/95,
pubblicato sulla G.U.n˚301 del 28/12/95 ed in particolare è
conforme a quanto indicato nell’art. 2, comma 1 dello stesso
decreto.
● Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist
die Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt
wird, kann das Gerät unter Verwendung der Timer-Betriebsart
oder Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
● Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie
ou la télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par
l’utilisateur. Personne non qualifiée n’enlèvera jamais les
couvercles. L’appareil contenant des organes portés à haute
tension, débrancher l’appareil avant toute réparation ou en
période de non-utilisation.
i
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas
que pueda reparar. No quite nunca las tapas a menos que se
esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
Desenchufe siempre la clavija de la red del tomacorriente
antes de realizar cualquier servicio de mantenimiento y
cuando no se use el aparato durante un largo período de
tiempo.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar.
Stickkontakten ska därför dras ut från nätuttaget före
reparationsarbeten och bör dras ut om apparaten inte ska
användas på mycket länge.
● Quando il tasto ON/STAND-BY si trova in posizione STANDBY, all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STANDBY, l’unità può essere accesa con il modo timer o con il
telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente.
Non togliere mai i coperchi, a meno di non essere qualificati
per farlo. All’interno dell’apparecchio ci sono tensioni
pericolose, per cui si deve sempre staccare la spina del cavo
d’alimentazione dalla presa di corrente prima di qualsiasi
intervento di manutenzione e quando non si usa l’apparecchio
per un lungo periodo di tempo.
● Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, kan het toestel ingeschakeld worden via de timerfunctie
of de afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren
onderdelen. Verwijder de behuizing nooit tenzij u deskundig
bent op dit gebied. In het toestel loopt een gevaarlijke spanning; haal de stekker altijd uit het stopcontact alvorens
onderhoud uit te voeren of wanneer het toestel voor langere
tijd niet gebruikt wordt.
CD-MPX870H
● Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação
através do modo de programação horária ou pelo controle
remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas
pelo usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens
perigosas. Remova sempre o cabo de alimentação da tomada
antes de efetuar qualquer conserto ou quando deixar o
aparelho muito tempo fora de uso.
● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode
or remote control.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long
period.
0203
ii
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
CD-MPX870H
● Når ON/STAND-BY-knappen er sat i STAND-BY positionen,
er der stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position,
kan apparatet startes v.hj.a. timer-funksionen eller
fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af
brugeren selv. Fjern aldrig kabinettet med mindre De er
kvalificeret hertil. Apparatet indeholder farlig
strømspaending. Traek altid stikket ud af stikkontakten før
der foretages reparationer, eller hvis apparatet ikke er i
brug i laengere tid.
● Audio-visuelles Material kann Urheberrechte umfassen, die
ohne Genehmigung des Eigentümers dieser Urheberrechte
nicht aufgenommen werden dürfen. Siehe die entsprechenden
nationalen Gesetze.
● Le matériel audio-visuel peut comporter des oeuvres faisant
l’objet de droits d’auteur qui ne peuvent être enregistrées sans
l’autorisation du possesseur du droit d’auteur, veuillez vous
référer aux réglementations nationales en vigueur.
● El material audiovisual puede consistir en trabajos que tengan
derechos de autor y que no deben grabarse sin la autorización
del poseedor de dichos derechos de autor. Sírvase consultar
las leyes aplicables en su país.
● Audiovisuellt material kan innehålla upphovsrättsarbete som
inte skall mångfaldigas utan tillstånd av copyrightinnehavaren.
Se den tillämpliga lagen i ditt land.
DENNA APPARAT ÄR ANSLUTEN TILL 230 V
VÄXELSTRÖM NÄR STICKPROPPEN ÄR INSKJUTEN I
VÄGGUTTAGET. FÖR ATT FULLSTÄNDIGT KOPPLA IFRÅN
APPARATEN, V.G. DRAG UT STICKPROPPEN.
● Il materiale audio-visivo che fosse soggetto a copyright non
può essere registrato senza l’autorizzazione del possessore
del copyright. Si prega di attenersi alle leggi in vigore sul
territorio nazionale.
● Audio-visueel materiaal kan worden beschermd door
auteursrechten, in welk geval het niet mag worden opgenomen
zonder de toestemming van de auteursrechthouder. Zie voor
nadere informatie de betreffende wetten in het land van
gebruik.
● O material audiovisual pode consistir de trabalhos de direitos
autorias que não devem ser gravados sem autorização do
proprietário dos direitos. Favor consultar as leis vigentes em
seu país.
● Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of the
copyright. Please refer to relevant law in your country.
iii
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
CD-MPX870H
iv
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
CD-MPX870H
● VORSICHT
Verwendung von Regelungen oder Einstellungen bzw.
Durchführung von anderen Verfahren als die hierin
angegebenen kann zum Aussetzen gefährlicher Strahlung
führen.
Da der in diesem Compact Disc Player verwendete Laserstrahl
für die Augen schädlich ist, ist das Gehäuse unter keinen
Umständen zu zerlegen.
Wenden Sie sich für Wartungsarbeiten nur an berechtigten
Fachhändler.
● ATTENTION
Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement. En cas de non-respect,
on s’exposera à une radiation dangereuse.
Éviter absolument de démonter l’appareil, qui utilise un rayon
laser nuisible aux yeux. Pour toute réparation, s’adresser à
une personne qualifiée.
● PRECAUCIÓN
El uso de los controles, ajustes o ejecución de procedimientos
distintos de los especificados podría causar la exposición a
radiación peligrosa.
No intente desmontar la caja ya que el haz de láser usado en
este reproductor de discos compactos es perjudicial para los
ojos. Para el servicio de reparación, consulte a una persona
cualificada.
● LET OP
Gebruik van regelaars, het maken van instellingen, gebruik
of handelingen anders dan in deze gebruiksaanwijzing
vermeld, kan gevaarlijke straling blootleggen.
De laserstraal in deze CD-speler kan de ogen beschadigen,
Probeer derhalve de ombouw niet te verwijderen. Laat
reparaties alleen over aan erkend onderhoudspersoneel.
● CUIDADO
O uso de controles, ajustes ou a execução de procedimentos
além daqueles especificados aqui pode resultar em perigosa
exposição à radiação.
Como os raios laser usados neste player de CD são perigosos
para os olhos, não tente desmontar o aparelho. Solicite o
conserto somente para pessoas especializadas.
● CAUTION
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
● OBSERVERA
Användning av reglage eller justeringar eller handhavande
på annat sätt än som anges kan leda till farlig bestrålning.
Försök inte ta isär höljet eftersom CD-spelarens laserstråle
är skadlig för ögonen. Överlåt service endast till kvalificerad
personal.
● ATTENZIONE
L’uso dei comandi e l’effettuazione di regolazioni e
procedimenti diversi da quelli specificati nel manuale possono
provocare una pericolosa esposizione alle radiazioni.
Poiché il raggio laser usato in questo giradischi può
danneggiare gli occhi, non smontare l’apparecchio. Per le
riparazioni rivolgersi a personale specializzato.
v
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
Eigenschaften der Laserdiode
Material: GaAIAs
Wellenlänge: 795 nm
Emissionsdauer: kontinuierlich
Laser-Ausgang: max. 0,6 mW
CD-MPX870H
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS.
WARNUNG-UNSICHTBARE LASERSTRAHLUNG WENN GERÄT
GEÖFFNET. NICHT IN DIE STRAHLUNG SCHAUEN ODER
DIREKT MIT OPTISCHEN HILFSMITTELN BETRACHTEN.
Caractéristiques de la diode laser
Matière: GaAIAs
Longueur d’onde: 795 nm
Durée d’émission: ininterrompue
Puissance de sortie laser maximale: 0,6 mW
ATTENTION-RAYON LASER INVISIBLE EN CAS D'OUVERTURE.
NE PAS REGARDER LE FAISCEAU DIRECTEMENT OU AVEC DES
INSTRUMENTS OPTIQUES.
Características del diodo láser
Material: GaAIAs
Longitud de onda: 795 nm
Duración de emisión : continua
Salida de láser: máx. 0,6 mW
Laserdiodens egenskaper
Material: GaAIAs
Våglängd: 795 nm
Utstrålningsvaraktighet: kontinuerlig
Lasereffekt: max. 0,6 mW
Proprietà del diodo laser
Materiale: GaAIAs
Lunghezza d’onda: 795 nm
Durata di emissione: continua
Uscita massima del laser: 0,6 mW
Laser diode specificaties
Materiaal: GaAIAs
Golflengte: 795 nm
Stralingsduur: doorlopend
Laseruitgang: max. 0,6 mW
Propriedades do diodo laser
Material: GaAlAs
Comprimento de onda: 795 nm
Duração da emissão: contínua
Saída de laser: máx. 0,6 mW
Laser Diode Properties
Material: GaAIAs
Wavelength: 795 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
ADVERSEL-SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
SE IKKE IND I STRÅLEN-HELLER IKKE MED OPTISKE INSTRUMENTER.
VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ
OPTISEN LAITTEEN LÄPI.
VARNING-SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ
STRÅLEN GENOM OPTISKT INSTRUMENT.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN
I DENNA BRUKSANVISNING SPECIFICERAS. KAN
ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR
LASERKLASS 1.
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
vi
CD-MPX870H
Entsorgungsinformationen
Informations sur la mise au rebut correcte
A. Entsorgungsinformationen für Benutzer aus
Privathaushalten
Achtung: Ihr Produkt
trägt dieses Symbol.
Es besagt, dass
Elektro- und Elektronikgeräte nicht mit
dem Haushaltsmüll
entsorgt, sondern
einem getrennten
Rücknahmesystem
zugeführt werden
sollten.
1. In der Europäischen Union
Achtung: Werfen Sie dieses Gerät zur Entsorgung bitte
nicht in den normalen Hausmüll!
Gemäß einer neuen EU-Richtlinie, die die ordnungsgemäße
Rücknahme, Behandlung und Verwertung von gebrauchten
Elektro- und Elektronikgeräten vorschreibt, müssen
elektrische und elektronische Altgeräte getrennt entsorgt
werden.
Nach der Einführung der Richtlinie in den EU-Mitgliedstaaten
können Privathaushalte ihre gebrauchten Elektro- und
Elektronikgeräte nun kostenlos an ausgewiesenen
Rücknahmestellen abgeben*.
In einigen Ländern* können Sie Altgeräte u.U. auch
kostenlos bei Ihrem Fachhändler abgeben, wenn Sie ein
vergleichbares neues Gerät kaufen.
*) Weitere Einzelheiten erhalten Sie von Ihrer
Gemeindeverwaltung.
Wenn Ihre gebrauchten Elektro- und Elektronikgeräte
Batterien oder Akkus enthalten, sollten diese vorher
entnommen und gemäß örtlich geltenden Regelungen
getrennt entsorgt werden.
Durch die ordnungsgemäße Entsorgung tragen Sie dazu
bei, dass Altgeräte angemessen gesammelt, behandelt
und verwendet werden. Dies verhindert mögliche
schädliche Auswirkungen auf Umwelt und Gesundheit
durch eine unsachgemäße Entsorgung.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung
nach dem ordnungsgemäßen Verfahren zur Entsorgung
dieses Geräts.
Für die Schweiz: Gebrauchte Elektro- und Elektronikgeräte
können kostenlos beim Händler abgegeben werden, auch
wenn Sie kein neues Produkt kaufen. Weitere
Rücknahmesysteme finden Sie auf der Homepage von
www.swico.ch oder www.sens.ch.
A. Informations sur la mise au rebut à l'intention
des utilisateurs privés (ménages)
Attention : votre produit comporte ce
symbole. Il signifie
que les produits
électriques et électroniques usagés ne
doivent pas être
mélangés avec les
déchets ménagers
généraux. Un
système de collecte
séparé est prévu
pour ces produits.
B. Entsorgungsinformationen für gewerbliche
Nutzer
1. Au sein de l'Union européenne
Attention : si vous souhaitez mettre cet appareil au rebut,
ne le jetez pas dans une poubelle ordinaire !
Les appareils électriques et électroniques usagés doivent
être traités séparément et conformément aux lois en
vigueur en matière de traitement, de récupération et de
recyclage adéquats de ces appareils.
Suite à la mise en oeuvre de ces dispositions dans les
Etats membres, les ménages résidant au sein de l'Union
européenne peuvent désormais ramener gratuitement*
leurs appareils électriques et électroniques usagés sur
des sites de collecte désignés.
Dans certains pays*, votre détaillant reprendra
également gratuitement votre ancien produit si vous
achetez un produit neuf similaire.
*) Veuillez contacter votre administration locale pour plus
de renseignements.
Si votre appareil électrique ou électronique usagé
comporte des piles ou des accumulateurs, veuillez les
mettre séparément et préalablement au rebut
conformément à la législation locale en vigueur.
En veillant à la mise au rebut correcte de ce produit, vous
contribuerez à assurer le traitement, la récupération et le
recyclage nécessaires de ces déchets, et préviendrez
ainsi les effets néfastes potentiels de leur mauvaise
gestion sur l'environnement et la santé humaine.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez
contacter votre administration locale qui vous renseignera
sur la méthode d'élimination correcte de cet appareil.
Suisse : les équipements électriques ou électroniques
usagés peuvent être ramenés gratuitement au détaillant,
même si vous n'achetez pas un nouvel appareil. Pour obtenir
la liste des autres sites de collecte, veuillez vous reporter à la
page d'accueil du site www.swico.ch ou www.sens.ch.
B. Informations sur la mise au rebut à l'intention
des entreprises
1. In der Europäischen Union
Wenn Sie dieses Produkt für gewerbliche Zwecke
genutzt haben und nun entsorgen möchten:
Bitte wenden Sie sich an Ihren SHARP Fachhändler, der
Sie über die Rücknahme des Produkts informieren kann.
Möglicherweise müssen Sie die Kosten für die
Rücknahme und Verwertung tragen. Kleine Produkte
(und kleine Mengen) können möglicherweise bei Ihrer
örtlichen Rücknahmestelle abgegeben werden.
Für Spanien: Bitte wenden Sie sich an das vorhandene
Rücknahmesystem oder Ihre Gemeindeverwaltung,
wenn Sie Fragen zur Rücknahme Ihrer Altgeräte haben.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung
nach dem ordnungsgemäßen Verfahren zur Entsorgung
dieses Geräts.
1. Au sein de l'Union européenne
Si ce produit est utilisé dans le cadre des activités de
votre entreprise et que vous souhaitiez le mettre au rebut :
Veuillez contacter votre revendeur SHARP qui vous
informera des conditions de reprise du produit. Les frais
de reprise et de recyclage pourront vous être facturés. Les
produits de petite taille (et en petites quantités) pourront
être repris par vos organisations de collecte locales.
Espagne : veuillez contacter l'organisation de collecte
existante ou votre administration locale pour les
modalités de reprise de vos produits usagés.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez
contacter votre administration locale qui vous renseignera
sur la méthode d'élimination correcte de cet appareil.
vii
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
Información sobre la eliminación
Information om återvinning
A. Información sobre eliminación para
usuarios particulares
Atención: su producto está marcado
con este símbolo.
Significa que los
productos eléctricos
y electrónicos usados no deberían
mezclarse con los
residuos domésticos generales. Existe un sistema de
recogida independiente para estos
productos.
1. En la Unión Europea
Atención: si quiere desechar este equipo, ¡por favor no
utilice el cubo de la basura habitual!
Los equipos eléctricos y electrónicos usados deberían
tratarse por separado de acuerdo con la legislación que
requiere un tratamiento, una recuperación y un reciclaje
adecuados de los equipos eléctricos y electrónicos usados.
Tras la puesta en práctica por parte de los estados
miembros, los hogares de particulares dentro de los
estados de la Unión Europea pueden devolver sus
equipos eléctricos y electrónicos a los centros de
recogida designados sin coste alguno *.
En algunos países* es posible que también su vendedor
local se lleve su viejo producto sin coste alguno si Ud.
compra uno nuevo similar.
*) Por favor, póngase en contacto con su autoridad local
para obtener más detalles.
Si sus equipos eléctricos o electrónicos usados tienen
pilas o acumuladores, por favor deséchelos por separado
con antelación según los requisitos locales.
Al desechar este producto correctamente, ayudará a
asegurar que los residuos reciban el tratamiento, la
recuperación y el reciclaje necesarios, previniendo de esta
forma posibles efectos negativos en el medio ambiente y
la salud humana que de otra forma podrían producirse
debido a una manipulación de residuos inapropiada.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en
contacto con las autoridades locales y pregunte por el
método de eliminación correcto.
Para Suiza: Los equipos eléctricos o electrónicos pueden
devolverse al vendedor sin coste alguno, incluso si no
compra ningún nuevo producto. Se puede encontrar una
lista de otros centros de recogida en la página principal
de www.swico.ch o www.sens.ch.
CD-MPX870H
A. Information om återvinning av elektrisk
utrustning för hushåll
OBS! Produkten är
märkt med symbolen ovan. Denna
symbol indikerar att
elektroniska produkter inte ska kastas i det vanliga
hushållsavfallet eftersom det finns ett
separat avfallshanteringssystem för
dem.
1. EU-länder
OBS! Kasta inte denna produkt i soporna!
Förbrukad elektrisk utrustning måste hanteras i enlighet
med gällande miljölagstiftning och återvinningsföreskrifter.
I enlighet med gällande EU-regler ska hushåll ha
möjlighet att lämna in elektrisk utrustning till
återvinningsstationer utan kostnad.* I vissa länder* kan
det även hända att man gratis kan lämna in gamla
produkter till återförsäljaren när man köper en ny
liknande enhet.
*) Kontakta kommunen för vidare information.
Om utrustningen innehåller batterier eller ackumulatorer
ska dessa först avlägsnas och hanteras separat i enlighet
med gällande miljöföreskrifter.
Genom att hantera produkten i enlighet med dessa
föreskrifter kommer den att tas om hand och återvinnas
på tillämpligt sätt, vilket förhindrar potentiella negativa
hälso- och miljöeffekter.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på
gällande sorterings- och återvinningsföreskrifter om du
behöver göra dig av med denna produkt.
B. Information om återvinning för företag
1. EU-länder
Gör så här om produkten ska kasseras:
Kontakta SHARPs återförsäljare för information om hur
man går till väga för att lämna tillbaka produkten. Det kan
hända att en avgift för transport och återvinning
tillkommer. Mindre skrymmande produkter (om det rör sig
om ett fåtal) kan eventuellt återlämnas till lokala
återvinningsstationer.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på
gällande sorterings- och återvinningsföreskrifter om du
behöver göra dig av med denna produkt.
B. Información sobre Eliminación para
empresas usuarias
1. En la Unión Europea
Si el producto se utiliza en una empresa y quiere desecharlo:
Por favor póngase en contacto con su distribuidor
SHARP, quien le informará sobre la recogida del
producto. Puede ser que le cobren los costes de
recogida y reciclaje. Puede ser que los productos de
tamaño pequeño (y las cantidades pequeñas) sean
recogidos por sus centros de recogida locales.
Para España: por favor, póngase en contacto con el
sistema de recogida establecido o con las autoridades
locales para la recogida de los productos usados.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en
contacto con sus autoridades locales y pregunte por el
método de eliminación correcto.
viii
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870H
Informazioni per un corretto smaltimento
Attenzione: Il dispositivo è contrassegnato da questo simbolo, che segnala di
non smaltire le apparecchiature elettriche ed elettroniche insieme ai
normali rifiuti domestici. Per tali prodotti è previsto un
sistema di raccolta
a parte.
Informatie over verantwoorde verwijdering
A. Informazioni sullo smaltimento per gli utenti
(privati)
A. Informatie over afvalverwijdering voor
gebruikers (particuliere huishoudens)
1. Nell'Unione europea
Attenzione: Per smaltire il presente dispositivo, non
utilizzare il normale bidone della spazzatura!
Le apparecchiature elettriche ed elettroniche usate
devono essere gestite a parte e in conformità alla
legislazione che richiede il trattamento, il recupero e il
riciclaggio adeguato dei suddetti prodotti.
In seguito alle disposizioni attuate dagli Stati membri, i
privati residenti nella UE possono conferire
gratuitamente le apparecchiature elettriche ed
elettroniche usate a centri di raccolta designati*.
In alcuni paesi*, anche il rivenditore locale può ritirare
gratuitamente il vecchio prodotto se l'utente acquista un
altro nuovo di tipologia simile.
*) Per maggiori informazioni si prega di contattare
l'autorità locale competente.
Se le apparecchiature elettriche o elettroniche usate
hanno batterie o accumulatori, l'utente dovrà smaltirli a
parte preventivamente in conformità alle disposizioni locali.
Lo smaltimento corretto del presente prodotto contribuirà
a garantire che i rifiuti siano sottoposti al trattamento, al
recupero e al riciclaggio necessari prevenendone il
potenziale impatto negativo sull'ambiente e sulla salute
umana, che potrebbe derivare da un'inadeguata gestione
dei rifiuti.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare
le autorità locali e informarsi sul metodo di smaltimento
corretto.
Per la Svizzera: Le apparecchiature elettriche o
elettroniche usate possono essere restituite
gratuitamente al rivenditore, anche se non si acquista un
prodotto nuovo. Altri centri di raccolta sono elencati sulle
homepage di www.swico.ch o di www.sens.ch.
1. In de Europese Unie
Let op: Deze apparatuur niet samen met het normale
huisafval weggooien!
Afgedankte elektrische en elektronische apparatuur moet
gescheiden worden ingezameld conform de wetgeving
inzake de verantwoorde verwerking, terugwinning en
recycling van afgedankte elektrische en elektronische
apparatuur.
Na de invoering van de wet door de lidstaten mogen
particuliere huishoudens in de lidstaten van de Europese
Unie hun afgedankte elektrische en elektronische
apparatuur kosteloos* naar hiertoe aangewezen
inzamelingsinrichtingen brengen*.
In sommige landen* kunt u bij de aanschaf van een
nieuw apparaat het oude product kosteloos bij uw lokale
distributeur inleveren.
*) Neem contact op met de plaatselijke autoriteiten voor
verdere informatie.
Als uw elektrische of elektronische apparatuur batterijen
of accumulatoren bevat dan moet u deze afzonderlijk
conform de plaatselijke voorschriften weggooien.
Door dit product op een verantwoorde manier weg te
gooien, zorgt u ervoor dat het afval de juiste verwerking,
terugwinning en recycling ondergaat en potentiële
negatieve effecten op het milieu en de menselijke
gezondheid worden voorkomen die anders zouden
ontstaan door het verkeerd verwerken van het afval.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op
met de plaatselijke autoriteiten voor informatie omtrent
de juiste verwijderingsprocedure.
Voor Zwitserland: U kunt afgedankte elektrische en
elektronische apparatuur kosteloos bij de distributeur
inleveren, zelfs als u geen nieuw product koopt.
Aanvullende inzamelingsinrichtingen zijn vermeld op de
startpagina van www.swico.ch of www.sens.ch.
Let op: Uw product
is van dit merkteken
voorzien. Dit betekent dat afgedankte
elektrische en elektronische apparatuur niet samen met
het normale huisafval mogen worden
weggegooid. Er
bestaat een afzonderlijk inzamelingssysteem voor deze
producten.
B. Informazioni sullo smaltimento per gli utenti
commerciali
B. Informatie over afvalverwijdering voor
bedrijven
1. Nell'Unione europea
Se il prodotto è impiegato a scopi commerciali,
procedere come segue per eliminarlo.
Contattare il proprio rivenditore SHARP che fornirà
informazioni circa il ritiro del prodotto. Potrebbero essere
addebitate le spese di ritiro e riciclaggio. Prodotti piccoli
(e quantitativi ridotti) potranno essere ritirati anche dai
centri di raccolta locali.
Per la Spagna: Contattare il sistema di raccolta ufficiale o
l'ente locale preposto al ritiro dei prodotti usati.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare
le autorità locali e informarsi sul metodo di smaltimento
corretto.
1. In de Europese Unie
Als u het product voor zakelijke doeleinden heeft gebruikt
en als u dit wilt weggooien:
Neem contact op met uw SHARP distributeur die u
inlichtingen verschaft over de terugname van het
product. Het kan zijn dat u een afvalverwijderingsbijdrage
voor de terugname en recycling moet betalen. Kleine
producten (en kleine hoeveelheden) kunnen door de
lokale inzamelingsinrichtingen worden verwerkt.
Voor Spanje: Neem contact op met de inzamelingsinrichting
of de lokale autoriteiten voor de terugname van uw
afgedankte producten.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op
met de plaatselijke autoriteiten voor informatie omtrent
de juiste verwijderingsprocedure.
ix
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_COM.fm
Informação sobre Eliminação de Produtos
Atenção: O seu produto está identificado com este símbolo. Significa que
os produtos eléctricos e electrónicos
não devem ser misturados com o lixo
doméstico comum.
Existe um sistema
de recolhas específico para estes produtos.
Information on Proper Disposal
A. Informações sobre a Eliminação de
Produtos para os Utilizadores (particulares)
A. Information on Disposal for Users (private
households)
1. Na União Europeia
Atenção: Se quiser eliminar este equipamento, não o
deve fazer juntamente com o lixo doméstico comum!
O equipamento eléctrico e electrónico deve ser tratado
separadamente e ao abrigo da legislação aplicável que obriga
a um tratamento, recuperação e reciclagem adequados de
equipamentos eléctricos e electrónicos usados.
Após a implementação desta legislação por parte dos
Estados-membros, todos os cidadãos residentes na
União Europeia poderão entregar o seu equipamento
eléctrico e electrónico usado em estações de recolha
específicas a título gratuito*.
Em alguns países* o seu revendedor local também pode
recolher o seu equipamento usado a título gratuito na
compra de um novo equipamento.
*) Contacte as entidades locais para mais informações.
Se o seu equipamento eléctrico e electrónico usado
funcionar a pilhas ou baterias, deverá eliminá-las em
separado, conforme a legislação local, e antes de
entregar o seu equipamento.
Ao eliminar este produto correctamente estará a contribuir
para que o lixo seja submetido aos processos de tratamento,
recuperação e reciclagem adequados. Desta forma é
possível evitar os efeitos nocivos que o tratamento
inadequado do lixo poderia provocar no ambiente e na saúde.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades
locais e informe-se sobre o método correcto para
proceder à sua eliminação.
Na Suíça: O equipamento eléctrico e electrónico é aceite,
a título gratuito, em qualquer revendedor, mesmo que
não tenha adquirido um novo produto. Poderá encontrar
uma lista das estações de recolha destes equipamentos
na página da Web www.swicho.ch ou www.sens.ch.
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated
separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used
electrical and electronic equipment.
Following the implementation by member states, private
households within the EU states may return their used
electrical and electronic equipment to designated
collection facilities free of charge*. In some countries*
your local retailer may also take back your old product
free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure
that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential
negative effects on the environment and human health
which could otherwise arise due to inappropriate waste
handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic equipment
can be returned free of charge to the dealer, even if you
don't purchase a new product. Further collection facilities
are listed on the homepage of www.swico.ch or
www.sens.ch.
Attention: Your product is marked with
this symbol. It
means that used
electrical and electronic products
should not be mixed
with general household waste. There is
a separate collection system for
these products.
B. Informações sobre a Eliminação de
Produtos para Utilizadores-Empresas
CD-MPX870H
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform you
about the take-back of the product. You might be charged
for the costs arising from take-back and recycling. Small
products (and small amounts) might be taken back by
your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your
local authorities and ask for the correct method of
disposal.
1. Na União Europeia
Se o produto for usado para fins comerciais e quiser
eliminá-lo:
Contacte o seu revendedor SHARP que irá informá-lo
sobre a melhor forma de eliminar o produto. Poderá ter de
pagar as despesas resultantes da recolha e reciclagem do
produto. Alguns produtos mais pequenos (e em pequenas
quantidades) poderão ser recolhidos pelas estações locais.
Na Espanha: Contacte o sistema de recolhas público ou
as entidades locais para mais informações sobre a
recolha de produtos usados.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades
locais e informe-se sobre o método correcto para
proceder à sua eliminação.
x
9/5/06
Downloaded From DvDPlayer-Manual.com Sharp Manuals
ENGLISH
CD-MPX870H
ENGLISH
Introduction
Contents
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully. It
will guide you in operating your SHARP product.
General Information
Special Note
Supply of this product does not convey a license nor imply any right
to distribute content created with this product in revenue-generating
broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating
content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives,
memory cards and the like). An independent license for such use is
required. For details, please visit http://mp3licensing.com.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
Accessories
Please confirm that the following accessories are included.
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the clock (Remote control only) . . . . . . . . . . . . . . . . . 11
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . . 12 - 15
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . . 16 - 18
MP3/WMA navigation (only for MP3/WMA files) . . . . . . . . 19 - 22
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 24
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) . . . . . . . 25 - 26
Remote control 1
"AA" size battery (UM/SUM-3,
R6, HP-7 or similar) 2
Tape Recording
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . 26 - 28
Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . . . . . . . . . 29 - 34
Timer and sleep operation (Remote Control only) . . . . . . 35 - 38
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 - 40
AM loop aerial 1
E-1
FM aerial 1
Note:
Only the above accessories are included.
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 42
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 44
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
Precautions
CD-MPX870H
ENGLISH
10 cm (4") 10 cm (4")
10 cm (4")
10 cm (4")
Table
Use the unit on a firm, level surface free from
vibration.
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equipment (home computers, facsimiles, etc.)
which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
In case of an electrical storm, unplug the
unit for safety.
Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
The AC power plug is used as disconnect
device and shall always remain readily
operable.
Do not remove the outer cover, as this
may result in electric shock. Refer
internal service to your local SHARP
service facility.
AC INPUT
The ventilation should not be impeded by
covering the ventilation openings with
items, such as newspapers, tablecloths,
curtains, etc.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Attention should be drawn to the environmental aspects of battery
disposal.
The apparatus is designed for use in moderate climate.
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
General Information
General
Please ensure that the equipment is positioned in a well ventilated
area and ensure that there is at least 10 cm (4") of free space
along the sides, top and back of the equipment.
Volume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
E-2
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Controls and indicators
General Information
ENGLISH
Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. ON/STAND-BY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
8. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 25
9. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
10. Game/Video Input Sockets . . . . . . . . . . . . . . . . . . . . . . . . . 39
11. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 13
12. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 13
13. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . 14, 26
15. CD Play or Repeat, Tape Play Button . . . . . . . . . . . 13, 17, 25
16. CD Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button . . . . . . . . 11, 14, 24, 26, 35
17. CD Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down Button . . . 11, 14, 24, 26, 35
18. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 25
19. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
E-3
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
2
3
4
5 6 7 8 9 10 11 12 13
20 21
15 16 17
14
22
18
23
19
3
4
5
6
7
1
8
2
Display
Reference page
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 19
3. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7. Traffic Announcement Indicator . . . . . . . . . . . . . . . . . . . . 29
8. Dynamic PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
9. Traffic Programme Indicator . . . . . . . . . . . . . . . . . . . . . . . 29
10. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
11. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
12. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 36
13. Tape 2 Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
14. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 20
15. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
16. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 23
17. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 23
18. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
19. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 24
20. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
21. Disc Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 17
22. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
23. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rear panel
Reference page
1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. AM Aerial EarthTerminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. AM Loop Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Speaker Light-up Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Video out Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
8. Front Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front Speaker
1. Tweeter
2. Super Tweeter
3. Woofer
4. Bass Reflex Duct
5. Speaker Wire
6. Speaker Light-Up Wire
1
2
4
3
6
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
ENGLISH
General Information
1
CD-MPX870 EN.fm
5
E-4
1
2
3
4
5
6
7
8
CD-MPX870H
Controls and indicators (continued)
ENGLISH
Remote control
1
General Information
2
8
9
10
11
12
13
17
14
18
15
19
20
22
3
4
21
16
23
24
26
25
27
28
29
5
6
7
30
31
32
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 35
4. Character Input/Disc Direct Search Buttons . . . . . . . . 16, 21
5. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 10
6. Extra Bass/Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 10
8. ON/STAND-BY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
11. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
12. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
13. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . 10, 18
14. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
16. Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
17. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 18, 24, 35
18. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Disc Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . 13, 17
20. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
21. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . . . 27
22. Tuning Up, Cursor Up Button . . . . . . . . . . . . . . . . . . . . 19, 23
23. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up, Cursor Right Button . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 14, 24, 26, 35
24. Disc Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down, Cursor Left Button . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 14, 24, 26, 35
25. Tuning Down, Cursor Down Button . . . . . . . . . . . . . . . 19, 23
26. MP3/WMA Navigation Mode Select Button . . . . . . . . . . . . 19
27. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
28. MP3/WMA Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 15
29. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
30. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
31. RDS PTY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
32. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
E-5
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
System connections
CD-MPX870H
ENGLISH
Make sure to unplug the AC power lead before any connections.
Aerial connection (see page 7)
FM aerial
AM loop aerial
Left speaker
Preparation for Use
Right speaker
Speaker light-up wire
Speaker connection
(see page 7)
Speaker light-up wire
Wall socket
(AC 230 V, 50 Hz)
AC power connection (see page 8)
E-6
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
System connections (continued)
ENGLISH
Preparation for Use
Aerial connection
Speaker Light-Up connection
AM loop
aerial
FM
aerial
Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
sockets for speaker illumination. To turn off the speaker light-up feature, press the CLEAR/DIMMER button on the remote control for 2
seconds or more.
ANTENNA
FM
GND
AM
RIGHT SPEAKER
LEFT
SPEAKERS
LIGHT-UP
LEFT SPEAKER
RIGHT
Supplied FM aerial:
Connect the FM aerial wire to the FM
75 OHMS socket and position the FM
aerial wire in the direction where the
strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM
and GND terminals. Position the AM
loop aerial for optimum reception.
Place the AM loop aerial on a shelf,
etc., or attach it to a stand or a wall with
screws (not supplied).
75 OHMS
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
Speaker connection
Connect the black wire to the FRONT SPEAKERS minus (-) terminal,
and the red wire to the FRONT SPEAKERS plus (+) terminal.
Red
Note:
Placing the right speaker light-up wire to the RIGHT socket and the
left speaker light-up wire to the LEFT socket.
Caution:
Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not stand or sit on the speakers. You may
be injured.
Do not allow any objects to fall into or to be
placed in the bass reflex duct.
Black
E-7
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
Incorrect
CD-MPX870H
ENGLISH
Demonstration mode
Wall socket
(AC 230 V, 50 Hz)
Notes:
The unit will start the tape initialisation when plugged into the wall
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for
improved cooling. Please do not cover the opening of the fan with
any obstacles, as this will block proper ventilation.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll and the front
speaker will light up in flashing mode.
To cancel the demonstration mode:
When the unit is in the power
stand-by mode (demonstration
mode), press the X-BASS/DEMO
button. The unit will enter the low
power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS /
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.
External FM aerial
Use an external FM aerial if you require better reception. Consult
your dealer.
Preparation for Use
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
ANTENNA
FM
GND
AM
External
FM aerial
75 OHMS
75 ohms
coaxial cable
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
E-8
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Remote control
ENGLISH
Battery installation
1
2
3
Open the battery cover.
Insert the supplied batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Close the battery cover.
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
Keep the remote control away from moisture, heat, shock, and vibrations.
Preparation for Use
Test of the remote control
Check the remote control after checking all the connections (see
pages 6 - 8).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Remote sensor
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to malfunction.
Battery removal:
Open the battery cover and pull up the battery to take out.
E-9
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
General control
CD-MPX870H
ENGLISH
Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
0 ..... 30 MAXIMUM
Equaliser
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
Speaker light up control
The speaker will light up according to the level of the music source
played back. To turn on/off the light, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
When the power is first turned on, the unit will enter FLAT mode.
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
In CD/TUNER/TAPE mode
In GAME/VIDEO mode
FLAT
No equalisation.
FLAT
No equalisation.
ROCK
For rock music.
ROCK
For rock music.
CLASSIC For classical music.
POPS
For pop music.
VOCALS Vocals are enhanced.
JAZZ
For jazz.
Basic Operation
Bass Control (X-BASS)
When the X-BASS/DEMO button is
pressed, the unit will enter the extra bass
mode. To cancel this mode, press the XBASS/DEMO button again.
CLASSIC For classical music.
ACTION
For action games.
SPORTS For sports games.
RACING
For car racing games.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
E-10
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Setting the clock (Remote control only)
ENGLISH
5
Press the
or
button to adjust the hour and
then press the MEMORY button.
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
Basic Operation
6
Press the
or
button to adjust the minutes and
then press the MEMORY button.
In this example, the clock is set for the 24-hour (0:00) display.
1
2
3
Press the ON/STAND-BY button to turn the power on.
4
Press the
or
button to select 24-hour or 12hour display and then press the MEMORY button.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select "CLOCK", and press the MEMORY button.
"0:00"
"AM 12:00"
"AM 0:00"
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the
time.
The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time display when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 42 for details.]
2 Perform "Setting the clock" from step 1.
E-11
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
Listening to a CD or MP3/WMA disc
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Auto power on function:
When you press any of the following buttons, the unit turns on.
CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
CD / button on the remote control: The unit turns on and CD
playback starts (regardless of the last function).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for Windows Media Player.
"MP3" or "WMA" indicator will light up after the unit reads information on an MP3 or WMA disc.
ENGLISH
CD or MP3/WMA disc Playback
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
CD-MPX870H
E-12
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Listening to a CD or MP3/WMA disc (continued)
CD or MP3/WMA disc Playback
ENGLISH
1
2
3
Press the ON/STAND-BY button to turn the power on.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
Press the CD button.
Press the 1 button and within 5 seconds, press the
button to open the disc tray 1.
12 cm (5")
5
8 cm (3")
Press / button to close the disc tray 1.
MP3 indicator
WMA indicator
[CD]
[MP3/WMA]
Total number of
Total playing
Total number Total number
tracks on the disc time of the disc of folders
of files
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
You can place discs on the trays 2 - 5 by following steps
3 - 5.
7
Press the
/
button to start playback.
Disc play indicator
E-13
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
To exchange other discs whilst playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the button and exchange discs.
To remove the discs:
In the stop mode, press the
press the button.
1-
Various disc functions
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the /
button to resume playback from the paused
point.
Track up/
Track down
Press in the playback
or stop mode.
5 buttons and within 5 seconds,
Caution:
Do not place two discs in a same tray.
Do not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is restored.
If the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
If you press the button
in the stop mode,
press the / button
to start the desired
track.
Fast forward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
CD or MP3/WMA disc Playback
Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop automatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
E-14
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Listening to a CD or MP3/WMA disc (continued)
ENGLISH
CD or MP3/WMA disc Playback
Notes for CD:
Track up/track down is possible only within individual discs.
Fast forward/fast reverse is possible only within individual discs.
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Notes for MP3/WMA discs:
Track up/track down is possible only within individual discs.
The sound is heard during fast forward/fast reverse with a CD, but
not with an MP3/WMA disc. For fast forward or fast reverse of an
MP3/WMA disc, refer to playback time on the display.
Fast forward/fast reverse is possible only within individual tracks.
When the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its beginning is reached during fast reverse.
To change the display (MP3/WMA discs only)
Whilst a disc is playing, press the DISPLAY
button.
Each time the button is pressed, the display
will change as follows.
Track number Elapsed
playback time
File name
E-15
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
Folder name
Advanced CD or MP3/WMA disc playback
To specify a disc to play
Press one of the
1-
ENGLISH
Direct track search
You can play a disc by specifying the disc number.
5 buttons to select the desired disc.
By using the direct search buttons, the desired tracks on the current
disc can be played.
Use the direct search buttons on
the remote control to select the
desired track whilst playing the
selected disc.
Selected track number
Selected disc number
2
Within 5 seconds, press the
/
button on the main unit.
The direct search buttons allow you to select up to number 9.
When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
Playback will begin from track 1 on the chosen disc.
After the last track on the last disc is played, the unit stops automatically.
Note:
If a disc tray with no disc is selected, playback will not start and the
disc indicator will disappear.
If the direct search buttons are pressed whilst the disc is stopped,
press the / button to start the desired track on the current disc.
CD or MP3/WMA disc Playback
1
CD-MPX870H
Notes:
A track number higher than the number of tracks on the disc cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
E-16
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Advanced CD or MP3/WMA disc playback (continued)
ENGLISH
Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously.
CD or MP3/WMA disc Playback
To repeat one disc:
Press the / button twice.
Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
Press the RANDOM button on the remote control.
To repeat all tracks on up to 5 discs:
Press the / button three times.
To repeat desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page 18 and
then press the / button twice.
To cancel repeat play:
Press the / button again.
" " will disappear.
To cancel random play:
Press the / button.
"R" will disappear.
Notes:
If you press the
button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
) button. Otherwise, the disc(s) will play continuously.
E-17
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
(CD
CD-MPX870H
ENGLISH
1
2
Whilst in the stop mode, press
the MEMORY button to enter the
programming save mode.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be
cleared.
Press one of the 1 - 5 buttons
to select the desired disc.
Selected disc number
3
Press the direct search buttons
on the remote control to select
the desired track.
Selected track number
You can also select a track by pressing the
or
button.
4
Press the MEMORY button to
save the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6
Press the
To clear the programmed selections:
Press the CLEAR/DIMMER button on the remote control whilst the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track programmed.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or
button.
Notes:
When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.
CD or MP3/WMA disc Playback
Programmed play
You can choose up to 32 selections for playback in the order you like.
(CD ) button.
The total number in memory will appear.
7
Press the
/
button to start playback.
E-18
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
CD or MP3/WMA disc Playback
ENGLISH
MP3/WMA navigation (only for MP3/WMA files)
MP3/WMA navigation:
You can search and play files by folder or title. For example, when
you assign three titles to a file, enter genre (such as jazz) as title 1,
album name as title 2, and music title as title 3 to search the file by
any title.
You can search and play files by folder or title 1/2/3 within one
MP3/WMA disc (see page 20).
By entering a name, you can search files by folder or title 1/2/3
within one MP3/WMA disc (see page 21).
Folders or titles can be programmed within one MP3/WMA disc
(see page 22).
When you enter file names on your PC, connect words with hyphens.
This product recognises the first word as title 1, second one as title
2, and third one as title 3. Up to three words can be recognised.
Example:
Folder
Title 1
Title 2
Title 3
(File name)
Folder
Title 1
Title 2
Title 3
AAA
(POPULAR-HITS 1-A MUSIC.mp3)
(POPULAR-HITS 2-B MUSIC.mp3)
BBB
(JAZZ-HITS 1-A MUSIC.mp3)
(JAZZ-HITS 2-B MUSIC.mp3)
CCC
(ROCK-HITS 1-A MUSIC.mp3)
(ROCK-HITS 2-B MUSIC.mp3)
(ROCK-HITS 3-C MUSIC.mp3)
(ROCK-HITS 4-D MUSIC.mp3)
Notes:
MP3 files must have the extension ".mp3".
WMA files must have the extension ".wma".
Up to 100 folders or 300 files can be read on the unit. If either limit
is exceeded, no more folders/files are displayed.
This unit recognises and displays up to 48 characters for folder
names, and up to 32 characters for title 1/2/3.
All file/folder names appear in uppercase.
E-19
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
File search (by folder or title 1/2/3)
You can search and play files by folder or title 1/2/3 within one MP3/
WMA disc.
1
Press one of the
1 5 buttons to select a disc tray
containing an MP3/WMA disc.
2
Press the
disc.
3
Press the CD button to stop playback.
"NAVI READ" appears and the display shows the total number
of folders and files on the selected disc.
Use the
or
cursor button to scroll and select a folder
(or title), and then press the ENTER button.
Folder name
button, and the unit starts to read the MP3
If you press the / button instead of the ENTER button, all
files in the selected folder (or title) are played.
8
Use the
or
File name
MP3 indicator
WMA indicator
Total number Total number
of folders
of files
4
5
9
Folder
Title 1
MP3
Title 2
Title 3
The following steps describe file search by folder:
6
Press the
/
button to start playback.
The unit plays from the selected file to the last file in the selected folder (or title), and the previous display returns.
Press the NAVIGATION button.
Press the , ,
or
cursor button on the remote control to select
"FOL", "T-1", "T-2" or "T-3". To
search files by folder name, select
"FOL" (will flash).
cursor button to scroll and select a file.
Press the ENTER button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
File search by title 1/2/3:
In step 5, select "T-1", "T-2" or "T-3" and follow the same steps as
file search by folder.
The unit searches all files on the disc, regardless of the folder.
To stop playback:
Press the CD button.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
CD or MP3/WMA disc Playback
/
7
Folder name
The NAVIGATION button allows you to go one step back.
Press the DISPLAY button to
check the number of files.
Notes:
In the MP3/WMA navigation mode, direct play and direct search
functions are disabled.
If a folder, title or file name does not appear, or appears incorrectly, remove and reinsert the disc and try again.
If you press the RANDOM button in the stop mode, the MP3/WMA
navigation mode will be cancelled.
E-20
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
MP3/WMA navigation (only for MP3/WMA files) (continued)
ENGLISH
Character search (for folder or title 1/2/3)
CD or MP3/WMA disc Playback
By entering a name, you can search files by folder or title 1/2/3 within
one MP3/WMA disc.
1
Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 20.
2
3
Press the NAVIGATION button.
4
Press the , ,
or
cursor
button on the remote control to
select "FOL", "T-1", "T-2" or "T-3".
To search files by folder name,
select "FOL" (will flash).
6
When finished, press the ENTER button. The unit
searches for the same name within folders (or titles).
If the search word is not in the folder (or title) name, "NOT
FOUND" appears and the menu returns.
Folder
Title 1
Title 2
Title 3
9
10
Press the
alphabet.
Press the
display.
or
or
cursor button to select the desired
button to go to the next page of character
Press the CHARACTER button and the active character will
be entered in the 2nd row of the display.
Use the or
(or title).
cursor button to scroll and select a folder
Press the
button to start playback.
/
All files in the selected folder (or title) are played, and the previous display returns.
Press the CHARACTER button for 2 seconds.
The display will be ready for editing characters.
1st row: String table
2nd row: Input editor (8 digits)
5
8
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
Notes:
The unit searches regardless of the case, and names found will
appear in uppercase.
Some symbols do not appear properly.
Character entry with direct buttons:
The direct buttons on the remote
control can also be used for character entry.
In step 5 on the left, use buttons 0 9 to enter alphabets.
Alphabet types change as you
press a button.
For example, press "2" four times to enter "C".
To delete an entered character, move the cursor to the character with the or button and press the CLEAR/DIMMER button on the remote control.
7
E-21
2
A
B
C
Characters:
Repeat steps 5 and 6 to enter characters.
In the folder (or title) name search, you do not have to enter the
full name. The unit searches for names beginning with the entered characters.
1
2 ABC
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
3 DEF
4 GHI
5 JKL
6 MNO 7 PQRS 8 TUV 9 WXYZ
: indicates a space.
CD-MPX870 EN.fm
0
CD-MPX870H
ENGLISH
1
Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 20.
2
3
Press the NAVIGATION button.
4
Press the , , or cursor button on the remote control
to select "FOL", "T-1", "T-2" or "T-3" and then press the
ENTER button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
Press the or cursor button to select the desired folder
(or title) and then press the MEMORY button.
The folder (or title) is memorised with all the files.
5
Repeat step 4 for other folders (or titles).
Up to 10 folders (or 10 titles) can be programmed.
6
Press the
/
button to start playback.
Programmed play will always start from the smallest folder (or
title) number.
To check, add or delete programmed contents:
In the stop mode, select a folder (or title) with the or cursor button. If the folder (or title) is programmed, "MEMORY" flashes.
Flashes if the folder (or title)
is programmed
When you press the MEMORY button with "MEMORY" flashing,
the folder (or title) is removed from the programme.
If you press the MEMORY button with "MEMORY" off, the folder
(or title) is added to the programme.
To clear all programmes, press the CLEAR/DIMMER button in
the stop mode.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
The programmed contents are cleared.
Notes:
The programmed contents are cleared when you eject a disc,
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
If you press the RANDOM button in the stop mode, the MP3/
WMA navigation mode will be cancelled.
If tracks are programmed using track numbers (see
"Programmed play" on page 18):
In the MP3/WMA navigation mode, only programme by folder (or
title) name are played. When you exit the mode, the programme by
folder (or title) name are cleared.
When you exit the MP3/WMA navigation mode, programme by track
number are cancelled.
(Programme by track number are cleared when you remove the
disc.)
CD or MP3/WMA disc Playback
Programmed play (for folder, title 1/2/3)
Folders or titles can be programmed within one MP3/WMA disc.
Folder, title 1, title 2 and title 3 cannot be programmed together simultaneously.
To stop playback:
Press the CD button.
The programmed contents are not cleared.
E-22
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Listening to the radio
ENGLISH
Tuning
1
2
Press the ON/STAND-BY button to turn the power on.
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING (X or W) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING (X or W) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
Radio
Notes:
When radio interference occurs, auto scan tuning may stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (X or W) button again.
When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light
up. Finally, the station name will appear..
Full auto tuning can be achieved for RDS stations "ASPM", see
page 30.
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
E-23
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
Memorising a station
1
2
Perform steps 1 - 3 in "Tuning" on page 23.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
Press the MEMORY button to enter the preset tuning saving mode.
To recall a memorised station
Press the PRESET ( or
lect the desired station.
ENGLISH
) button for less than 0.5 seconds to se-
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1 Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET ( or ) button again when the desired station is located.
Radio
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
2
3
4
5
6
7
8
If the "MEMORY" and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become disconnected.
To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the button and the
button, press
the TUNER (BAND) button until "TUNER CL" appears.
E-24
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
Listening to a cassette tape (TAPE 1 or TAPE 2)
ENGLISH
Tape Playback
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
Tape playback
1
2
Press the ON/STAND-BY button to turn the power on.
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played facing towards you.
4
Press the TAPE (1
want to listen to.
5
Press the / (TAPE
start playback.
Open the cassette compartment by pushing the
area marked " ".
TAPE 1
TAPE 2
2) button to select the cassette you
) to
Tape play indicator
E-25
Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE (1 2) button (main unit and remote control): The unit turns
on and the "TAPE" function is activated.
TAPE button (remote control): The unit turns on and the "TAPE"
function is activated.
/ button (main unit): The unit turns on and playback of the last
function starts (CD,TAPE,TUNER,GAME/VIDEO).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
Recording on a cassette tape
CD-MPX870H
ENGLISH
Function
Main unit
Remote
control
Operation
Playback
Press in the stop
mode.
Stop
Press in the playback,
fast forward or rewind
mode.
Fast
forward/
Rewind
(TAPE 2
only)
Press in the playback
or stop mode.
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO tapes.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the eraseprevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape without the tab.
Caution:
To remove the cassette, press the (TAPE ) button, and then
open the compartment.
Before changing from one tape operation to another, press the
(TAPE ) button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
Side A
Tab for side B
Tape Recording
Various tape functions
Tab for side A
E-26
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Recording on a cassette tape (continued)
ENGLISH
Recording from a CD or MP3/WMA disc
1
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the
button.
Tape Recording
Recording will be paused.
5
6
Press one of the
1-
5 buttons to select the desired disc.
Within 5 seconds, press the
/
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
E-27
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
button to start recording.
Recording is started from the selected disc. When the playback of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
2
Recording from the radio
1
2
3
Load a prerecorded cassette
into the TAPE 1 cassette compartment. Insert a blank tape
into the TAPE 2 cassette compartment.
Tune in to the desired station (see page 23).
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the
button.
TAPE 1
Press the
/
(TAPE
) button to start recording.
To interrupt recording:
Press the
button.
To resume recording, press the
/
(TAPE
) button.
3
Press the TAPE (1
the display.
4
Press the
button.
Recording will be paused.
5
Press the
/
2) button until "TAPE 1" appears on
(TAPE
) button to start dubbing.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
To stop recording:
Press the (TAPE ) button.
Erasing recorded tapes
1
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
TAPE 2
It is recommended that the recording tape is the same length as
the master tape.
Recording will be paused.
4
Press the ON/STAND-BY button to turn the power on.
Tape Recording
To perform programmed recording:
1 Programme discs and tracks (see page 18).
2 Press the
button.
3 Press the / (TAPE ) button to start recording.
2
3
4
Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing towards you.
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
Press the
button.
Press the / (TAPE ) button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
E-28
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Advanced Features
ENGLISH
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the display will
switch as follows:
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
You can control the RDS by using the buttons on the remote
control only.
When you are tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will change in
the following order:
NO PS
NO PTY
FM 98.80 MHz
NO RT
E-29
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
Using the Auto Station Programme Memory
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
Press the TUNER (BAND) button to select the FM band.
Press and hold down the RDS ASPM button on the remote
control for at least 3 seconds.
1 After "ASPM" has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
2
3
When an RDS station is found, "RDS" will appear for a short
time and the station will be stored in memory.
Advanced Features
1
2
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then "END" will appear for
4 seconds.
E-30
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Using the Radio Data System (RDS) (continued)
ENGLISH
Advanced Features
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
If the same station is broadcasting on different frequencies, the
strongest frequency will be stored in memory.
Any station which has the same frequency as one stored in
memory will not be stored.
If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
If no stations have been stored in memory, "END" will appear for
about 4 seconds.
If the RDS signals are very weak, station names may not be
stored in memory.
To erase all of the contents of preset memory:
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the button and the
button, press
the TUNER (BAND) button until "TUNER CL" appears.
After performing this operation, all of the preset memory
information will be erased.
To store a station name again if the wrong name was stored in
memory:
It may be impossible to store station names in memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
1 Press the PRESET ( or ) button to check whether the names
are correct.
2 If you find a wrong name during receiving the station, wait until the
correct name will be displayed. And then press the MEMORY
button.
3 Within 30 seconds, press the MEMORY button whilst the preset
channel number is flashing.
The new station name has been stored in memory correctly.
Notes:
The same station name can be stored in different channels.
In a certain area or during certain time periods, the station names
may temporarily be different.
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
"PS", "NO PS" and a station name appear alternately, and the unit
does not operate properly.
If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work
properly.
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
"NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and
then the frequency will be displayed.
Notes for radio text:
The first 10 characters of the radio text will appear for 4 seconds
and then they will scroll across the display.
If you tune in to an RDS station which is not broadcasting any
radio text, "NO RT" will be displayed when you switch to the radio
text position.
Whilst radio text data is received or when the text contents
change, "RT" will be displayed.
E-31
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 33 -34) from the stations
in memory.
Press the TUNER (BAND) button to select the FM.
Press the RDS PTY button on the remote control.
"SELECT" and "PTY TI" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the PRESET (
lect the programme type.
or
) button to se-
Each time the button is pressed, the programme type will appear. If the button is held down for more than 0.5 seconds, the
programme type will appear continuously.
4
Advanced Features
1
2
Whilst the selected programme type is flashing (within 6
seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
E-32
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Using the Radio Data System (RDS) (continued)
ENGLISH
Advanced Features
Notes:
If the display has stopped flashing, start again from step 2. If the
unit finds a desired programme type, the corresponding channel
number will flash for about 4 seconds, and then the station name
will flash for 7 seconds, which will remain lit.
If you want to listen to the same programme type of another
station, press the RDS PTY button whilst the channel number or
station name is flashing. The unit will look for the next station.
If no station can be found, "NOT FOUND" will appear for 4
seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP" will appear.
(This does not mean that you can listen to the traffic information at
that time.)
When the traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the PRESET ( or ) button on the remote control to select a desired station.
3 The station name will be displayed for 6 seconds. Then the
display will change.
Descriptions of the PTY (Programme Type) codes, TP (Traffic
Programme) and TA (Traffic Announcement).
You can search for and receive the following PTY, TP and TA
signals.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
Topical programme expanding or enlarging upon
the news, generally in different presentation style or
concept, including debate, or analysis.
Programmes whose purpose is to impart advice in
the widest sense.
Programme concerned with any aspect of sport.
Programme intended primarily to educate, of which
the formal element is fundamental.
All radio plays and serials.
Programmes concerned with any aspect of national
or regional culture, including language, theatre, etc.
Programmes about the natural sciences and
technology.
Used for mainly speech-based programmes usually
of light-entertainment nature, not covered by other
categories. Examples include: quizzes, panel
games, personality interviews.
Commercial music, which would generally be
considered to be of current popular appeal, often
featuring in current or recent record sales charts.
Contemporary modern music, usually written and
performed by young musicians.
Current contemporary music considered to be
"easy-listening", as opposed to Pop, Rock or
Classical, or one of the specialised music styles,
Jazz, Folk or Country. Music in this category is
often but not always, vocal, and usually of short
duration.
E-33
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Classical music for general, rather than specialist
appreciation. Examples of music in this category
are instrumental music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and including
Grand Opera.
Musical styles not fitting into any of the other
categories. Particularly used for specialist music of
which Rhythm & Blues and Reggae are examples.
Weather reports and forecasts and meteorological
information.
Stock Market reports, commerce, trading, etc.
For programmes targeted at a young audience,
primarily for entertainment and interest, rather than
where the objective is to educate.
Programmes about people and things that
influence them individually or in groups. Includes:
sociology, history, geography, psychology and
society.
Any aspect of beliefs and faiths, involving a God or
Gods, the nature of existence and ethics.
Involving members of the public expressing their
views either by phone or at a public forum.
Features and programmes concerned with travel to
near and far destinations, package tours and travel
ideas and opportunities. Not for use for
announcements about problems, delays, or
roadworks affecting immediate travel where TP/TA
should be used.
Programmes concerned with recreational activities
in which the listener might participate. Examples
include, Gardening, Fishing, Antique collecting,
Cooking, Food & Wine, etc.
Polyphonic, syncopated music characterised by
improvisation.
COUNTRY
Songs which originate from, or continue the musical
tradition of the American Southern States.
Characterised by a straightforward melody and
narrative story line.
NATION M
Current Popular Music of the Nation or Region in
that country's language, as opposed to
International 'Pop' which is usually US or UK
inspired and in English.
OLDIES
Music from the so-called "golden age" of popular
music.
FOLK M
Music which has its roots in the musical culture of a
particular nation, usually played on acoustic
instruments. The narrative or story may be based
on historical events or people.
DOCUMENT Programme concerned with factual matters,
presented in an investigative style.
TEST
Broadcast when testing emergency broadcast
equipment or receivers.
ALARM !
Emergency
announcement
made
under
exceptional circumstances to give warning of
events causing danger of a general nature.
NONE
No programme type (receive only).
TP
Broadcasts which carry traffic announcements.
TA
Traffic announcements are being broadcast.
Advanced Features
LIGHT M
E-34
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
ENGLISH
Timer and sleep operation (Remote control only)
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at a
preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Advanced Features
Once timer:
Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a programme on a
radio station.
Timer playback or timer recording
Before setting timer:
Daily timer:
Daily timer play or daily timer recording works at
the same preset time every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and
use the daily timer to wake up.
1 Set the daily timer (pages 35 - 37).
2 Set the once timer (pages 35 - 37).
1 minute or more
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select "ONCE" or "DAILY", and press the MEMORY button.
Once timer
Daily timer
Start
1 Check that the clock is set to the correct time (refer to page 11).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the cassette compartment.
Stop
Start
Stop
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between operations.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
Continued to the next page
E-35
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
Within 10 seconds, press the
or
button to select "ONCE SET" or "DAILY SET", and press the MEMORY
button.
5
Press the
or
button to select "PLAY" or
"REC", and press the MEMORY button.
White
9
Switch input with the
or
button, and then
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY button.
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power standby mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
Red
The illustrations show the daily timer setting.
6
Press the
or
button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily timer mode.
7
Press the
or
button to adjust the minutes and
then press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
Advanced Features
ENGLISH
4
Continued to the next page
E-36
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Timer and sleep operation (Remote control only) (continued)
Advanced Features
ENGLISH
12
When the preset time is reached, playback or recording
will start.
The volume will increase gradually until it reaches the preset
volume.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer will operate at the same time every day. It will continue until the daily timer setting is cancelled. Cancel the daily
timer when it is not in use.
Notes:
When performing timer playback or recording using another unit
connected to the GAME INPUT sockets, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically, however, the connected unit will not turn on or off.
During timer playback or timer recording, TIMER indicator light
and timer indicator on the display r, will blink.
To stop the blinking, follow step "Cancelling the timer setting in
the timer stand-by mode" on the right hand side of this page.
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
"ONCE CALL" or "DAILY CALL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
"ONCE ON" or "DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
E-37
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
1
2
3
4
Play back the desired sound source.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select
"SLEEP", and press the MEMORY button.
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"SLEEP X : XX".
"X : XX" is remaining sleep time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"SLEEP OFF", and press the MEMORY button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.
1
2
Set the sleep time (see left, steps 1 - 5).
Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 35 - 36).
Sleep timer setting
Timer playback or
recording setting
1 minute - 3 hours
Sleep operation will
automatically stop.
Advanced Features
Sleep operation
The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.
End time
Desired time
Timer playback or recording
start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.
E-38
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
ENGLISH
Enhancing your system
Listening to playback sounds of Game, VCR,
DVD, etc.
The connection lead is not included. Purchase a commercially available lead as shown below.
1
GAME or VCR, DVD, etc.
2
To the line output socket
Advanced Features
Connect a TV to the rear VIDEO OUT sockets.
Switch the TV input to auxiliary.
3
4
5
Yellow
White
Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) sockets.
Yellow White Red
Red
Press the ON/STAND-BY button to turn the power on.
Press the GAME/VIDEO button.
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images
on the TV.
Note:
To prevent noise interference, place the unit away from the television.
Video cable
(not supplied)
RCA lead
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
TV
To record on a tape from game, VCR, etc.
To video
input
socket
Yellow
Video cable
(not supplied)
Yellow
AC INPUT
1
2
3
4
5
Insert a cassette in the TAPE 2 cassette compartment.
Press the GAME/VIDEO button.
Press the
Press the
button.
/
(TAPE
) button.
Start the game system, VCR, etc.
E-39
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
ENGLISH
General
Symptom
The clock is not set to the
correct time.
When a button is pressed,
the unit does not respond.
No sound is heard.
Possible cause
Did a power failure occur? Reset
the clock. (Refer to page 11.)
Set the unit to the power standby mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer to page 42.)
Is the volume level set to "0"?
Are the headphones connected?
Are the speaker wires disconnected?
CD player
Symptom
Playback does not start.
Playback stops in the middle or is not performed
properly.
Playback sounds are
skipped, or stopped in the
middle of a track.
References
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.
CD-MPX870H
Possible cause
Is the disc loaded upside down?
Does the disc satisfy the standards?
Is the disc distorted or
scratched?
Is the unit located near excessive
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?
E-40
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Troubleshooting chart (continued)
ENGLISH
Cassette deck
Symptom
Cannot record.
References
Cannot record tracks with
proper sound quality.
Cannot erase completely.
Sound skipping.
Cannot hear treble.
Sound fluctuation.
Cannot remove the tape.
Tuner
Possible cause
Is the erase-prevention tab removed?
Is it a normal tape? (You cannot
record on a metal or CrO tape.)
Is there any slack?
Is the tape stretched?
Are the capstans, pinch rollers,
or heads dirty?
If a power failure occurs during
playback, the heads remain engaged with the tape. Do not open
the compartment with great
force.
Symptom
The radio makes unusual
noises continuously.
Possible cause
Is the unit placed near the TV or
computer?
Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
Remote control
Symptom
The remote control does
not operate.
Possible cause
Is the AC power lead of the unit
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Does the remote control sensor
receive strong light?
E-41
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
Whilst pressing down the button and the button, press the
TUNER (BAND) button until "CLEAR ALL" appears.
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the unit
with discs left inside can damage the unit.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collection and player.
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
YES
Correct
References
If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
E-42
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
CD-MPX870H
Maintenance
Specifications
ENGLISH
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
A
TAPE 1
D
E
B
B
C
C
References
TAPE 2
Playback head
Capstans
Pinch rollers
Erase head
Recording/Playback head
After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape
head demagnetiser. Read the demagnetiser's instructions carefully before use.
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power
consumption
Power on: 120 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 260 mm (10 - 1/4")
Height: 330 mm (13")
Depth: 323 mm (12 - 7/8")
Weight
7.78 kg (17.2 lbs.)
* This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 8 to
cancel the demonstration mode.
Amplifier
Output power
PMPO: 1080 W
MPO: 540 W (270 W + 270 W) (DIN 45 324)
RMS: 300 W (150 W + 150 W) (DIN 45 324)
RMS: 240 W (120 W + 120 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
Game/Video: 1Vp-p
Cleaning the CD pickup lens
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be performed
periodically. Lens cleaners are commercially available. Contact your
local CD software dealer for options.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
Input terminals
E-43
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
CD-MPX870H
ENGLISH
Type
Signal readout
D/A converter
Frequency
response
Dynamic range
Front Speaker
5-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
Tuner
Frequency range
Type
Maximum input
power
Rated input power
Impedance
Dimensions
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
3-way type speaker system
Weight
Super tweeter
5 cm (2") tweeter
16 cm (6 - 5/16") woofer
300 W
150 W
6 ohms
Width: 200 mm (7 - 7/8" )
Height: 330 mm (13" )
Depth: 231 mm (9 - 1/8")
3.3 kg (7.3 lbs.) /each
Cassette deck
Frequency
response
Signal/noise ratio
Wow and flutter
50 - 14,000 Hz (normal tape)
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0.35 % (DIN 45 511)
References
CD player
E-44
03/12/17
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870 EN.fm
1
2
3
4
5
6
7
8
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
TINSZA213AWZZ
06H R AS 2
SHARP CORPORATION
03/11/4
Downloaded From DvDPlayer-Manual.com Sharp Manuals
CD-MPX870_BACK.fm
UP
CD-MPX870H
MINI COMPONENT SYSTEM
DOWN
Downloaded From DvDPlayer-Manual.com Sharp Manuals