Maytag CP31600ADQ/V Product specifications

GME95
®
Two-Stage Convertible,
Multi-Speed ECM Gas Furnaces
Up to 96% AFUE
®
Heating Input: 40,000–100,000 BTU/h
Standard Features
• Energy-efficient multi-speed ECM blower motor
• Heavy-duty aluminized-steel dualdiameter, tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage convertible gas valve automatically adjust to high or low stage
• Durable Silicon Nitride igniter
• Quiet single speed draft inducer
• Self-diagnostic control board with
constant memory fault code
• Color-coded low-voltage terminals with provisions
for electronic air cleaner and humidifier
• Low continuous fan speed options offer quiet air circulation
• All models comply with California
Low NOx emissions standards
Cabinet Features
• Multi-position installation:
upflow, horizontal left or right
• Certified for direct vent (2-pipe) or
non-direct vent (1-pipe)
• Easy to install top venting with
optional side venting
• Convenient left or right connection
for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with
durable baked-enamel finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side-return
with easy-cut tabs for effortless
removal in bottom air-inlet applications
Contents
Nomenclature........................................ 2
Product Specifications........................... 3
Dimensions............................................ 4
Airflow Data........................................... 5
Wiring Diagram.......................................7
Accessories............................................. 8
* Complete warranty details available from your local dealer or at www.amana-hac.com.
To receive the Lifetime Heat Exchanger Limited Warranty (good for as long as you own
your home), 10-Year Unit Replacement Limited Warranty and 10-Year Parts Limited
Warranty, online registration must be completed within 60 days of installation. Online
registration is not required in California or Québec.
SS-DGME95
www.amana-hac.com
Amana® is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P., Houston, Texas.
5/14
Supersedes 11/12
Product Specifications
Nomenclature
G
M
E
95
040
4
B
*
**
1
2
3
4,5
6,7,8
9
10
11
12,13
Brand
G Goodman® Brand
or Dis0nc0ons™
Revisions
Major and Minor Revisions
Airflow Direc2on
C Downflow/Horizontal
D Dedicated Downflow
H High Airflow
K Dedicated Upflow
M Upflow/Horizontal
NOx
N Natural Gas
X Low NOx
Cabinet Width
A 14”
B 17½”
C 21”
D 24½”
Descrip2on/Motor
V Two-­‐Stage/Variable-­‐speed
H Two-­‐Stage/Mul0-­‐speed
S Single-­‐Stage/Mul0-­‐speed
E Two-­‐Stage/EEM Motor
3 1200
AFUE
95 95%
9 93%+
8 80%
2
Maximum CFM @ 0.5” ESP
4 1600
5 2000
040: 40,000
060: 60,000
080: 80,000
www.amana-hac.com
MBTU/h
100: 100,000
120: 120,000
SS-DGME95
Product Specifications
Specifications
GME95
0403BXA*
GME95
0603BXA*
GME95
0805CXA*
GME95
1005DXA*
40,000
60,000
80,000
100,000
Heating Capacity
Input¹
Natural Gas Output¹
38,400
57,700
76,900
96,100
LP Gas Output¹
38,400
57,700
76,900
96,100
96.1
96.1
96.1
96.1
3
3
5
5
15-45
30-60
30-60
35-65
Size (D x W)
10” x 8”
10” x 8”
10” x 10”
11” x 10”
Horsepower
½
½
1
1
Speed
5
5
5
5
Vent Diameter³
2”
2”
3”
3”
AFUE²
Available AC @ 0.5” ESP
Temperature Rise Range (°F)
Circulator Blower
No. of Burners
Disposable Filter Size (in²)
2
3
4
5
580
580
960
960
7.9
9.2
10.0
11.1
15
15
15
15
120
124
144
162
Electrical Data
Min. Circuit Ampacity5
Max. Overcurrent Device (amps)
Ship Weight (lbs)
6
¹ Natural Gas BTU/h. For altitudes above 2,000’, reduce input rating 4% for each 1,000’ above sea level.
Low-fire rate is 75% of high-fire rate
² DOE AFUE based upon Isolated Combustion System (ICS)
³ Vent and combustion air diameters may vary depending upon vent length. Refer to the latest editions of the National Fuel Gas Code
NFPA 54/ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in Canada).
⁴ Permanent air filter size is based on 600 FPM velocity. Check with filter manufacturer for specific details.
⁵ Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
⁶ Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted.
Notes
• All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
• Gas Service Connection ½” FPT
• Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.
SS-DGME95
www.amana-hac.com
3
Product Specifications
Dimensions
COMPONENT IDENTIFICATION
GMH95*****XA*
AIR
DISCHARGE
AIR
DISCHARGE
19 7/8”
AIR
INTAKE
PIPE
2" PVC
RIGHT SIDE
DRAIN LINE
HOLES
1 1/2
2
1 5/8
1
UNFOLDED FLANGES
UNFOLDED FLANGES
FOLDED FLANGES
FOLDED FLANGES
RIGHT SIDE VIEW
Model
GME950403BXA*
GME950603BXA*
GME950805CXA*
GME951005DXA*
A
17½”
Cabinet Size
17½”
GMH950453BXA*
21”
GMH950703BXA*
24½”
B
16”
A
16”
19½”
17-1/2
23”
B
16
C
13⅛”
C
13⅛”
16⅛”
12-15/16
20⅝”
D
12-1/8
D
12⅛”
E
12⅛”
16
13-5/8
19⅜”
E
13⅝”
13⅝”
17½”
20⅞”
Notes:
GMH950704CXA*
17-1/2
16
19-1/2
15-15/16
21
• Installer must supply one or two PVCGMH950904CXA*
pipes: one for combustion
air (optional)
and one
for the flue outlet
(required).
Vent pipe
must be either 2” or 3” in diameter, depending upon furnace input, number of elbows, length of run, and installation (1 or 2 pipes).
The optional combustion air pipe is GMH950905DXA*
dependent on installation/code requirements and must be 2” or 3” diameter PVC.
23
20-7/16
• Line voltage wiring can enter through
the right or left side of24-1/2
furnace. Low-voltage
wiring
can enter19-3/8
through the20-7/8
right or left side of furnace.
GMH951155DXA*
• Conversion kits for high-altitude natural gas operation are available. Contact your Goodman distributor or dealer for details.
• Installer must supply the following
line fittings,
Allgas
dimensions
are according
in inches. to which entrance is used:
Left: One 90º street elbow; one 2½” pipe nipple; one 90º elbow; straight pipe; one ground joint union
Right: Straight pipe to reach gas valve
• Installations using a bottom return: Failure to unfold duct flanges will reduce airflow area by approximately 18%. This could result in performance and noise issues.
NOTE:to
Airflow
area will M
beaterials
reduced by approximately 18% if duct flanges are not unfolded. This could cause performance issues and
Minimum Clearances
Combustible
noise issues.
•
•
•
•
•
4
Position
Sides
Rear
Front
Bottom
Flue
Top
Upflow
0”
0”
1”
C
0”
1”
Horizontal
6”
0”
1”
C
0”
4”
6 on combustible floor, the floor MUST be wood ONLY.
C = If placed
For servicing or cleaning, a 24” front clearance is recommended.
Unit connections (electrical, flue, and drain) may necessitate greater clearances than the minimum clearances listed above.
In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.
Approved for line contact in the horizontal position
www.amana-hac.com
SS-DGME95
Product Specifications
Airflow Data
(CFM & Temperature Rise vs. External Static Pressure)
Model
GME95
0403BXA*
(MED-HI \ T4)
GME95
0603BXA*
(MED-HI \ T4)
GME95
0805CXA*
(MED-HI \ T4)
GME95
1005DXA*
(MED-HI \ T4)
Motor
Speed
Tons
AC ¹
External Static Pressure, (Inches Water Column)
0.1
0.2
0.3
CFM
Rise
CFM
Rise
CFM
0.4
Rise
CFM
0.5
Rise
CFM
0.6
0.7
0.8
Rise
CFM
CFM
CFM
T1
1.5
726
48
670
53
617
57
553
64
490
72
429
378
336
T2
2.0
905
39
860
41
812
43
761
46
712
49
663
610
574
T3
2.5
1,121
31
1,074
33
1,039
34
998
35
959
37
923
882
839
T4
3.0
1,274
28
1,239
28
1,199
29
1,166
30
1,129
31
1,096
1,059
1,021
T5
3.0
1,306
27
1,261
28
1,232
29
1,195
29
1,162
30
1,132
1,090
1,057
T1
1.5
714
80
667
79
604
87
548
96
484
109
422
367
325
T2
2.0
904
58
851
62
804
66
761
69
708
75
664
612
572
T3
2.5
1,125
47
1,075
49
1,045
51
999
53
956
55
921
877
839
T4
3.0
1,312
40
1,271
42
1,228
43
1,202
44
1,165
45
1,127
1,087
1,044
T5
3.5
1,423
37
1,386
38
1,354
39
1,321
40
1,278
41
1,210
1,134
1,032
T1
3.0
1,297
54
1,253
56
1,209
58
1,161
61
1,111
63
1,067
1,022
974
T2
3.5
1,507
47
1,455
48
1,422
49
1,377
51
1,334
53
1,296
1,251
1,195
T3
4.0
1,677
42
1,637
43
1,602
44
1,562
45
1,526
46
1,484
1,441
1,324
T4
4.0
1,879
37
1,842
38
1,800
39
1,762
40
1,700
41
1,566
1,437
1,319
T5
5.0
2,044
35
1,967
36
1,894
37
1,795
39
1,702
41
1,578
1,452
1,320
T1
3.0
1,331
66
1,275
69
1,206
73
1,145
77
1,080
81
1,021
953
889
T2
3.5
1,512
58
1,452
60
1,392
63
1,336
66
1,279
69
1,219
1,175
1,115
T3
4.0
1,713
51
1,666
53
1,614
57
1,569
56
1,513
58
1,468
1,414
1,364
T4
4.0
1,892
46
1,845
48
1,802
49
1,752
50
1,707
52
1,656
1,614
1,577
T5
5.0
2,080
42
2,038
43
2,005
44
1,960
45
1,920
46
1,879
1,843
1,791
¹ @0.5” ESP
Notes
• CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer.
• All furnaces ship as high-speed cooling and medium-speed heating. Installer must adjust blower cooling & heating speed as needed.
• For most applications, about 400 CFM per ton when cooling is desirable.
• INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.
• The chart is for information only. For satisfactory operation, external static pressure should not exceed value shown on the rating plate.
• The above chart is for furnaces installed at 0-2000 feet. At higher altitudes, a properly de-rated unit will have approximately the same temperature rise at a particular CFM, while ESP at the CFM will be lower.
SS-DGME95
www.amana-hac.com
5
6
www.amana-hac.com
10
20
30
40
50
60
70
30
80
90
100
40
50
60
700
600 CFM
90
100
2000
2200
2400 CFM
1800
1600
1400
OUTPUT
BTU/HR
x 1000
Output BTU/h
x 1,000
80
1200
1100
1000
900
70
800
Formulas
FORMULAS
110
120
130
CFM x 1.08
140
BTUBTU/h
OUTPUT
RISE
Output==CFM
CFRMxx 1.08
1.08 xxRise
BTU OUTPUT
RISE
= = BTU/H Output ÷÷ CFM
Rise
CFM
1.08
BTU
OUTPUT
vs TEMPERATURE
CHART
BTU/h
Output
Vs. TemperatureRISE
Rise Chart
150
Product Specifications
Temperature Rise Chart
SS-DGME95
TEMPERATURE
RISE
Temperature Rise
E
D
C
B
6.00 ±.10
LABEL
Product Specifications
5.50 ±.10
FRAME
Wiring Diagram
8
BK
BK
2
1
5
4
9
8
7
BL
MODE
12
11
10
YL
GY
HEAT
OFF
DELAY
FACTORY SETTINGS
SHOWN
FS
2
1
115 VAC HOT AND PARK TERMINALS
R
WH
RO1 (5)
MANUAL RESET ROLLOUT
LIMIT CONTROL(S)
(SINGLE CONTROL ON 45K BTU)
24 VAC
TH (3)
115 VAC
FS
6
BL
GY
OR
HE LO
AT
-H
BR
WH
OR
COOL-H CIRCULATOR
BLWR
HI -H
AT
HE
ELECTRONIC
AIR CLEANER
LINE-H
MANUAL RESET
AUXILIARY LIMITS
(1) IN UPFLOW
BLOWER DECK
GND
10.75 ±.10
LABEL
BK
WH
JUNCTION BOX
DOOR
SWITCH
WH
INDUCED DRAFT
BLOWER
W ARNING :
DISCONNECT POWER
BEFORE SERVICING.
WIRING TO UNIT
MUST BE
PROPERLY
POLARIZED
AND GROUNDED.
WH
A UTO R ESET
P RIM A RY LIM IT
C O NTR OL
PU
BL
YL
C
PK
FLAME
SENSOR
DISCONNECT
2
2 FLASHES = PRESSURE SWITCH STUCK CLOSED
HI VOLTAGE (115V)
HI VOLTAGE FIELD
6
6 FLASHES =
OPEN RO LLO UT OR O PEN FUSE
C
CONTINUOUS/RAPID FLASHES = REVERSED 115 VAC POLARITY
PK PINK
WH WHITE
PU PURPLE
GN GREEN
BL BLUE
BK BLACK
RD RED
GY GRAY
IGNITER
TERMINAL
INTERNAL TO
INTEGRATED CONTROL
PLUG CONNECTION
SWITCH (PRESS.)
OVERCURRENT
PROT. DEVICE
www.amana-hac.com
DESCRIPTION
SS-DGME95
INITIAL RELEASE
0140F01115-A
2
NOTES:
1. SET HEAT ANTICIPATOR ON ROOM THERMOSTAT AT 0.7 AMPS.
2. MANUFACTURERS SPECIFIED REPLACEMENT PARTS MUST BE USED WHEN SERVICING.
3. IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE FURNACE MUST BE REPLACED, IT MUST BE
REPLACED WITH WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 105°C. USE COPPER
CONDUCTORS ONLY.
4. BLOWER SPEEDS SHOULD BE ADJUSTED BY INSTALLER TO MATCH THE INSTALLATION REQUIREMENTS SO
AS TO PROVIDE THE CORRECT
HEATING TEMPERATURE RISE AND THE CORRECT CFM (SEE SPEC SHEET FOR AIR FLOW CHART).
5. UNIT MUST BE PERMANENTLY GROUNDED AND CONFORM TO N.E.C. AND LOCAL CODES.
6. TO RECALL THE LAST 5 FAULTS, MOST RECENT TO LEAST RECENT, DEPRESS SWITCH FOR MORE THAN
2 SECONDS WHILE IN STANDBY (NO THERMOSTAT INPUTS)
A
BR BROWN
OR ORANGE
SWITCH (TEMP.)
REV ZONE
COLOR CODES:
YL YELLOW
JUNCTION
FIELD GND
FIELD SPLICE
ECN
7 FLASHES = LOW FLAME SIGNAL
8 FLASHES = CHECK IGNITER OR IMPROPER GROUNDING
EQUIPMENT GND
1105970
7
8
LOW VOLTAGE (24V)
LOW VOLTAGE FIELD
3
= CONTROL FAILURE
=
5 FLASHES = FLAME SENSE WITHOUT GAS VALVE
L
BK
OFF
5
N
GND
1 FLASH
3 FLASHES = PRESSURE SWITCH STUCK OPEN
WARNING:DISCONNECT POWER BEFORE
SERVICING.WIRING TO UNIT MUST BE
PROPERLY POLARIZED AND GROUNDED.
WH
1
4 FLASHES = OPEN HIGH LIMIT
N
TO 115 VAC / 1Ø / 60HZ
POWER SUPPLY WITH
OVERCURRENT PROTECTION
DEVICE
JUNCTION
BOX
STEADY ON = NORMAL OPERATION
3
GND
4
BL
0
4
L
RD
M A NU AL R ESET R O LLO UT LIM IT C O N TR O L(S )
ID BLOWER
( SINGLE CONTROL ON 45K BTU )
24 VAC
PRESSURE
HUMIDIFIER
SWITCH
FRONT COVER
PRESSURE SWITCH
NO
C
2 CIRCUIT
GY
GY
PM 1
CONNECTOR
GR
GND
HOT
3
BR
C
SURFACE
IGNITER
OR
2
HI
GAS VALVE (HONEYWELL)
SYSTE M LOCKOU T (RETRIES EXCE EDED )
DISCONNECT
TO 115VAC/ 1 Ø /60 HZ POWER SUPPLY WITH
OVERCURRENT PROTECTION DEVICE
OR
WH
5
10.25 ±.10
FRAME
EAC-H
BURNER COMPARTMENT
NO
ID
BLWR
IND
PU
BLOWER COMPARTMENT
OR
HOT SURFACE
IGNITER
IGN
INTEGRATED CONTROL MODULE
LINE NEUTRALS
OR
WH
BK
CIRCULATOR
BLOWER
RD
MANUAL RESET AUXILIARY AUTO RESET
LIMIT CONTROL
PRIMARY
LIMIT
CONTROL
RO2 (11)
FLAME SENSOR
PK
RD
HLO (1)
XFMR-H
YL
BK (HI)
BL (MED HI)
OR (MED)
RD (MED LOW)
YL (LOW)
W
WH
GR
RD
WH
NO
C
HLI (7)
40 VA
TRANSFORMER
BK
LINE-H
SEE
NOTE 4
GND
PS (10)
PSO (4)
TO
MICRO
INTEGRATED CONTROL MODULE
HEAT-H
COOL-H
Y
PK
XFMR-H
SEE
NOTE 6
DIAGNOSTIC
LED
BR
RD
GY
OR
*
GR
OR
OR
115 VAC NEUTRAL
TERMINALS
*
*
*
OR
G
7
ON OFF
PK
3
6
INTEGRATED
CONTROL
MODULE
GY
24V THERMOSTAT CONNECTIONS
OR
FUSE
⚡
WH
BK
2ND
STAGE
DELAY
PM
ID BLOWER
PRESSURE
SWITCH
MVH (12)
C
MVL(2) NO
FRONT COVER
PRESSURE SWITCH
C
W Y
⚠ Warning
115 VAC
R
G
GAS
HI VALVE
C
GND
GND (8)
MVC (9)
40 VA
TRANSFORMER
Wiring is subject to change. Always
refer to the wiring diagram or the
unit for the most up-to-date wiring.
C
INTEGRATED
CONTROL MODULE
HUMIDIFIER
TR (6)
High Voltage: Disconnect all power before servicing or installing this unit. Multiple power
sources may be present. Failure to do so may cause property damage, personal injury, or death.
GY
24 VAC
24V THERMOSTAT
CONNECTIONS
BLOWER
COMPARTMENT
DOOR SWITCH
(OPEN WHEN
DOOR OPEN)
OR
24 VAC
HUMIDIFIER
7
Product Specifications
Accessories
Accessory
GME95
GME95
GME95
GME95
0403BXA* 0603BXA* 0805CXA* 1005DXA*
Description
LPM-06
LP Conversion Kit (Springs & Orifice) ¹
√
√
√
√
LPLP03
LP Gas Low-Pressure Kit
√
√
√
√
GSAS
Electronic Air Cleaners (-10, -11, -12, -18)
√
√
√
√
GMU
Media Air Cleaners (1620, 2020, 1625, 2025)
√
√
√
√
EFR01
External Filter Rack
√
√
√
√
DCVK-20
Horizontal/Vertical Concentric Vent Kit (2”)
√
√
---
---
DCVK-30
Horizontal/Vertical Concentric Vent Kit (3”)
√
√
√
√
0170K00000S
Flush-mount Vent Kit
√
√
√
√
¹ White-Rodgers and Honeywell valves
√ Indicates accessories available for this model
Note: All installations above 7,000’ require a pressure switch change. For installation in Canada, furnaces are certified only to 4,500’.
Amana® is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P. All rights reserved. Our continuing
commitment to quality products may mean a change in specifications without notice. © 2014 • Goodman Company, L.P. • Houston, Texas • Printed in the USA.
8
www.amana-hac.com
SS-DGME95