PANO MANAGER CONNECTOR FOR SCVMM& HYPER-V Version 6.0.8

Add to my manuals
9 Pages

advertisement

PANO MANAGER CONNECTOR FOR SCVMM& HYPER-V  Version 6.0.8 | Manualzz

Version 6.0.8

Published: DEC-2013

Updated: 24 MAR 2014

PANO MANAGER CONNECTOR

FOR SCVMM& HYPER-V

2

©2005-2014 Propalms Ltd. All rights reserved.

The information contained in this document represents the current view of Propalms Ltd. on the issues discussed as of the date of publication. Because Propalms Ltd. must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Propalms Ltd., and Propalms Ltd. cannot guarantee the accuracy of any information presented after the date of publication.

This white paper is for informational purposes only. PROPALMS LTD. MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, IN THIS DOCUMENT.

Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) or for any purpose, without the express written permission of Propalms Ltd.

Contact Propalms Ltd.

Email: [email protected]

Call: +44 (0)1904 567760

3

CONTENTS

PANO MANAGER CONNECTOR .............................................................................................................................................................. 4

OVERVIEW ................................................................................................................................................................................................ 4

PLATFORM SUPPORT ........................................................................................................................................................................... 4

PANO CONTROLLER INTEGRATION ENHANCEMENT ............................................................................................................... 4

LICENSING ............................................................................................................................................................................................... 4

INSTALLATION ........................................................................................................................................................................................ 5

UPDATED PANO MANAGER HYPER-V VIRTUAL APPLIANCE................................................................................................... 9

KNOWN ISSUES...................................................................................................................................................................................... 9

SUPPORT AND ISSUE REPORTING ................................................................................................................................................... 9

PANO MANAGER CONNECTOR

OVERVIEW

The Pano Manager Connector for Microsoft SCVMM (SCVMM Connector) & Hyper-V provides an interface for Pano

Controller to communicate with Hyper-V and SCVMM. Pano Manager Connector allows managing virtual machine directly from Hyper-V as well as through SCVMM. It must be installed on the same machine where the Hyper-V server is installed or where the SCVMM tool is installed.

This document gives details of the new version of Pano Manager Connector with support for latest version of

Hyper-V and SCVMM

PLATFORM SUPPORT

Operating System:

 Windows 2008 R2 with Hyper-V

 Windows 2012 Server with Hyper-V 2012

 Windows 2012 R2 Server with Hyper-V 2012 R2

 Hyper-V 2008 R2 Server

 Hyper-V 2012 Server

 Hyper-V 2012 R2 Server

SCVMM Version:

 SCVMM 2008 R2

 SCVMM 2012 R2

 SCVMM 2012 with SP1

PANO CONTROLLER INTEGRATION ENHANCEMENT

With the release of Pano Manager Connector version 6.0.4.X, it is possible to integrate Pano Manager with Hyper-

V directly without the need of SCVMM. This can save on cost of licenses for SCVMM for smaller deployments. The following versions of Windows server with Hyper-V are supported:

 Windows 2008 R2 with Hyper-V

 Windows 2012 with Hyper-V

 Windows 2012 R2 with Hyper-V

Please note that for integrating Hyper-V server (without full OS), the integration is possible only through SCVMM.

LICENSING

Pano Manager Connector requires a license to function. You must get a Serial Key and User credentials for applying the license. License activation is over the Internet so the machine where Pano Manager Connector is being installed should have direct access to the Internet. If not, offline activation can be performed.

Please send an email to [email protected]

to get a license key for Pano Connector Manager.

4

INSTALLATION

Pano Manager Connector can connect directly with Hyper-V server or via SCVMM. The mode of operation needs to be selected during installation.

IMPORTANT NOTE: If you have any previous version of Pano Manager Connector installed on the server, please uninstall it from Add/Remote program.

1. Run the Pano Connector MSI Installer on the machine where Hyper-V is or SCVMM is installed

2. During installation, choose the mode of operation based on target management platform. The detected management platform will be displayed if available

5

3. Pano Manager Connector will automatically add a firewall exception for incoming TCP connections on the configured port number (default Port number is 8316).

4. During the installation, please activate the license by entering the Serial Key, Username and Password. This activation is over the Internet. The installer will activate the license over an outgoing TCP connection

(HTTPS) to https://keys.propalms.com

Activating License Online.

Click on ‘Activate Online’ and you will see the following screen, provide the detail and activate.

6

If you do not have a serial key, you can activate the license later by accessing the licensing tool from

“Propalms” Start Menu item.

Activating License Offline:

If the Pano Controller connector is installed on a machine where internet connection is not available, you can activate the license offline with ‘PanoCertificate.pcf’ file generated from ‘Pano Offline Certificate

Generator Tool’.

To Activate the License click on ‘Activate Offline’ and you will see the following screen.

Select the ‘PanoCertificate.pcf’ file from and activate.

7

You will see the license status as following if it is activated successfully.

8

NOTE:

You can generate the ‘PanoCertificate.pcf’ file from ‘Pano Offline Certificate Generator Tool’. To do so please download the tool from our portal an install it on a machine where internet is available.

Enter the Hardware Key (You can see this key in ‘Activate License Offline’ image).

Enter the Username, Password, and Serial Key which you have already received from us.

Click on ‘Generate’ button to generate the ‘PanoCertificate.pcf’ file.

5. Configure Hyper-V in Pano Manager now, as usual

UPDATED PANO MANAGER HYPER-V VIRTUAL APPLIANCE

There is an updated Pano Manager Virtual Appliance available with support for Hyper-V 2012. Please download the latest Pano Virtual Appliance for Hyper-V. To download the virtual appliance go to http://www.propalms.com/download/productdownloads.php.

KNOWN ISSUES

Following are the open issues in this release:

1. VM Template Deployment Issue: The automatic deployment of a virtual machine template feature is not supported by this version of Pano Manager Connector. This issue is being worked upon and will be resolved in next release.

2. There is a delay in getting the updated status of any operation on a DVM. This issue is being worked upon and will be fixed in next release.

SUPPORT AND ISSUE REPORTING

9

For support, please contact Pano support at [email protected]

or [email protected]

Propalms Ltd is a global provider of application delivery and secure remote access solutions for Remote Desktop Services and Virtual Desktop Infrastructures.

Delivering to Enterprises of all sizes we offer reliable, scalable and affordable solutions that simply work. Our belief is that application delivery solutions should be flexible, dynamic and above all, simple to use.

© 2014 Propalms Ltd. All Rights Reserved. Microsoft®, Windows® are registered trademarks of Microsoft Corporation in the United States and other countries. All other trademarks and registered trademarks are the property of their respective owners.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals