Rx-218S General Product Description Subwoofer Loudspeaker System


Add to my manuals
2 Pages

advertisement

Rx-218S General Product Description Subwoofer Loudspeaker System | Manualzz

General Product Description

The Rx-218S is a dedicated subwoofer loudspeaker system that incorporates two 18 DL-type woofers for maximum LF power with minimum box volume. This vented, 800-watt system easily provides 128 dB SPL 1 W/1 m (134 dB peaks 1 W/1 m) at full power in a rectangular enclosure that is stable and readily stacks for extra energy. The Rx-118S cabinet has recessed safety handles for ease of transport and includes a M 20 thread for a pole mount for use with full-range cabinets without the need for extra mounting stands. The rear of the cabinet includes four M

12 threaded T-nuts for affixing the Rx-wheel-bar kit. The Rx-

218 S is prepared for the optional Rx-Rigging kit to be flown in clusters with Rx-212/75 or other EV speaker systems. The

M-218 S processing module for modular P-series amplifiers provides optimized processing for fullrange use, or in combination with any of Rx-series subwoofers.

Rx-218S

Subwoofer Loudspeaker System

R x

S P E A K E R

S Y S T E M S

Speaker Description

LF Section & Components

HF Section & Components

System Configuration

Powering Configuration

Recommended Active High-Pass

Frequency (12 dB/octave min.)

Recommended Active Crossover

Frequency (24 dB/octave min.)

Cabinet Type (shape)

Enclosure Materials

Finish

Connectors

Suspension (optional)

Grille

Accessories

2 DL-type 18-inch woofer in vented enclosure

N/A

Subwoofer

Active crossover, M-218S module for P 1201/P 1202 amp

36 Hz

100 Hz

Rectangular

13-ply birch plywood

Black textured paint

Two Neutrik NL4 prepared for Rx-rigging kit

Powder-coated perforated steel

Wheel-bar kit

M-112 Processing module for P 1201, P 1202 system amplifier

Rx-Rigging kit

PCL 88 - pole mount

Step up to

Rx-218S

Subwoofer Loudspeaker System

Speaker Characteristics

Frequency Response

-10dB

-10dB* )

* ) using M-218 Module

Axial Sensitivity

SPL, 1 watt @ 1 m, half-space

SPL, 1 watt @ 1 m, full-space

Impedance

Power Handling

Long-term EIA

Short-term peak

Calculated Maximum Output SPL

Half-space, long-term

Half-space, peak

Full-space, long-Term

Full-space, peak

Dimensions

Height

Width

Depth

40 Hz-2000 Hz

35 Hz-135 Hz

102 dB

99 dB

4 ohms

800 watts

3200 watts

131 dB

137 dB

128 dB

134 dB

990 mm (38.98 in.)

560 mm (22.05 in.)

600 mm (23.62 in.)

Weights

Net Weight

Shipping Weight

56,5 kg (100 lb)

59,5 kg (109 lb)

Architects’ and Engineers’ Specifications

Rx 218S

The dedicated subwoofer loudspeaker system shall incorporate two 18-inch transducers with a cast aluminum basket in a vented enclosure tuned for optimum low frequency extension. The input panel shall have two paralleled NL4 connectors.

Usable system frequency response shall be 40 Hz to 2000 Hz measured on axis.

The loudspeaker shall be capable of producing a sound pressure level (SPL) of 98 dB on axis (full space) at 1 meter with a power input of one watt. It shall be capable of sustaining a full power, long term average output of 128 dB on axis at 1 meter with instantaneous peaks of 134 dB. The subwoofer shall handle 800 watts of amplified power long-term in compliance with AES-EIA standards and have a nominal impedance of 4 ohms.

The loudspeaker enclosure shall be constructed of 13-ply void-free cross-grainlaminated birch plywood. It shall be finished in black textured paint. It shall be of a rectangular shape with flat sides for stacking. Handles shall be recessed within the enclosure and of such design to allow safe handling from any direction. There shall be a M-20 thread for a pole mount socket located in the top handle of the cabinet.

For flying applications a rigging kit should be easily fixable to the cabinet.

The subwoofer loudspeaker system shall be the Electro-Voice ® model Rx-218S.

Shown with optional rigging kit

USA

Germany

U.K.

France

Australia

Hong Kong

Japan

Singapore

Telex Communications Inc., 12000 Portland Ave. South, Burnsville, MN 55337, Phone: +1 952-884-4051, FAX: +1 952-884-0043

Telex EVI Audio, Hirschberger Ring 45, D 94302, Straubing, Germany, Phone: 49 9421-706 0, FAX: 49 9421-706 265

Shuttle Sound, The Willow Centre, Willow Lane, Mitcham GB ? Survey ?, Phone: +44 20 864 671 14, FAX: +44 20 864 075 83

EVI France S. A., Parc de Courcerin, Allee Lech Walesa, Lognes, f-77185 Marne La Vallee, France, Phone: 33/1-6480-0090, FAX: 33/1-6006-5103

EVI Audio (Austl.), Unit 23, Block C, Slough Business Estate,Silverwater N.S.W. 2128, Australia, Phone: 61/2-9648-3455, FAX: 61/2-9648-5585

EVI Audio Limited, Unit E & F, 21/F, Luk Hop Industrial Bldg., 8 Luk Hop St., San Po Kong, Kowloon, Hong Kong, Phone: 852-2351-3628, FAX: 852-2351-3329

EVI Audio Japan, Ltd.,5-3-8 Funabashi, Setagaya-ku, Tokyo, 156-0055 Japan, Phone: 81-3-5316-5020, FAX: 81-3-5316-5031

Telex Communications, 3015A Ubi Rd 1, 05-10, Kampong Ubi, Industrial Estate, Singapore 408705, Phone: 65-746-8760, FAX: 65-746-1206

Mexico Av. Parque Chapultepec #66-201, Naucalpan Edo. Mex. 53390, Phone: (52) 5358-5434, FAX: (52) 5358-5588

Africa Mid-East Telex EVI Audio, Hirschberger Ring 45, D 94302, Straubing, Germany, Phone: 49 9421-706 0, FAX: 49 9421-706 265

Latin America Telex Communications Inc., 12000 Portland Ave. South, Burnsville, MN 55337, Phone: +1 507 526 3205, FAX: +1 507 526 3059

www.electrovoice.de

Telex Communications, Inc.

www.telex.com

©Telex Communications, Inc. 2/2001 Part Number 38109-985 Rev A (360088)

Subject to change without prior notice.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement