User's manual | ACTi ACM-8511 User`s manual
Add to my manuals16 Pages
ACTi ACM-8511 is a high-performance IP D/N PoE PTZ Camera that offers exceptional image quality, advanced features, and versatile applications. With its powerful ARM9 SoC and dual-streaming capability, it delivers smooth MPEG-4/MJPEG video at full D1 resolution (720x480) at 30 frames per second.
advertisement
IP D/N PoE PTZ Camera
ACM-8511
Ver. 120312
Hardware User’s Manual
Full D1 CAM-7200 series
CAM-5200
User’s Manual
0
0
PRECAUTIONS
1. Read these instructions
All the safety and operating instructions should be read before the product is operated.
2. Heed all warnings
All warnings on the product and in the instruction manual should be adhered to.
The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. b. The requirements to make this device work, including hardware, computer settings, network settings, and operation procedures. c. The tips to make using this device easier, more convenient and more efficient.
3. Servicing
Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual for hardware and software are probably registered trademarks of respective companies.
Liability
Every care has been taken during writing this manual. Please inform your local office if you find any inaccuracies or omissions. We cannot be held responsible for any typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice.
FCC/CE Regulation
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses,
0-1
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
0-2
Table of Contents
0 PRECAUTIONS________________________________________________ 0-1
Trademarks ________________________________________________________________ 0-1
Liability ___________________________________________________________________ 0-1
FCC/CE Regulation __________________________________________________________ 0-1
1 INTRODUCTION ______________________________________________ 1-1
Package Contents _______________________________________________ 1-1
Features and Benefits ____________________________________________ 1-2
Safety Instructions ______________________________________________ 1-4
Physical Description _____________________________________________ 1-6
Basic Connections _______________________________________________ 1-9
Product Specification ___________________________________________ 1-10
0-3
1
INTRODUCTION
1.1 Package Contents
ACM-8511
Product CD Terminal Blocks & Screw
Warranty Card Accessory
1-1
1.2 Features and Benefits
This IP D/N PoE PTZ Camera is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (D1, 720x480) at reasonable bandwidth through a standard
TCP/IP network. That is because it is Ethernet ready and has the powerful
ARM9 SoC with excellent system performance to offer dual streams of
MPEG4/MJPEG, and both formats offer megapixel resolution. In addition, with these powerful hardware platform, excellent SDK support and powerful respective apparatuses (e.g. the transcoder), this IP D/N PoE PTZ
Camera is your best choice building up either conventional IP surveillance system or intelligent IP surveillance system.
MPEG-4/MJPEG Dual Streaming
With excellent system performance, MPEG-4/MJPEG is supported. It brings superior image quality not only 30 frame per second in full D1 resolution.
Digital Time Code Embedded
The “Digital Time Code Embedded” function is to embed the recording time in the MPEG bit stream. Therefore, each image frame has its respective time when it was recorded. It is very useful when users want to find the video at an exact time or between a certain time intervals.
DDNS Supported
This IP D/N PoE PTZ Camera supports DDNS (Dynamic Domain
Name Server); users can set this IP D/N PoE PTZ Camera at a virtual domain name (such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual domain name to view the video anywhere that has the access to the internet.
Build-in Hardware Motion Detection
No more external motion sensors are required. Each IP D/N PoE PTZ
Camera can be set up to 3 detection areas. By tuning the object size and sensitivity, it is very reliable to fit into your environment. Besides, hardware motion detection delivers better sensitivity and responds faster than software motion detection.
Bundle Powerful Surveillance Software
To extend the capabilities of the IP outdoor rugged dome series, a
1-2
powerful surveillance program is included in the package and is very free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording and manual recording keep every important image recorded in the local hard disk. Reliable and accurate motion detection with instant warning makes you responsive in every condition. Quick and simple search and playback function lets you easily find the images you want.
Software Development Kit Support
This IP D/N PoE PTZ Camera can be integrated or controlled by user’s application program through the Streaming Library or ActiveX control.
With its high level programming interface, software developer’s time and efforts to is highly reduced.
1-3
1.3 Safety Instructions
Don’t use the power supply with other voltages
This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above.
Don’t open the housing of the product
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool and the like.
Don’t use accessories not recommended by the manufacturer
Only install this device and the power supply in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions.
1. When the power-supply cord or plug is damaged.
2. If liquid has been spilled, or objects have fallen into the video product.
3. If the video product has been exposed to rain or water directly.
1-4
1-5
4. If the video product does not operate normally by following the operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.
1.4 Physical Description
1-6
1. Power Input
If your power input is DC12V.
2. Ethernet Port
The IP D/N PoE PTZ Camera connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP D/N PoE
PTZ Camera can auto detect the speed of local network segment
(10Base-T/100Base-TX Ethernet).
3. Reset Button
Step 1: Switch off IP D/N PoE PTZ Camera by disconnecting the power cable
Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button.
Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings.
4. Audio Input
The IP D/N PoE PTZ Camera supports audio input with earphone jack
5. Audio Output
The IP D/N PoE PTZ Camera supports audio output with earphone jack
6. The I/O Terminal Connector
Used in applications for e.g. motion detection, event triggering, time lapse recording, alarm notifications, etc., the I/O terminal connector provides the interface to:
•1 transistor output - For connecting external devices such as relays and LED’s. Connected devices can be activated by Output buttons on the Live View page or by an Event Type. The output will show as active (in Event Configuration > Port Status) if the alarm device is activated.
•1 digital input - An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under Event Configuration > Port Status).
•Auxiliary power and GND
GND
Auxiliary
DC Power input
(not to power this camera)
Digital
Input
Pin 1 Ground
Pin 2 Electrically connected in parallel with the connector for the power supply, this pin provides an auxiliary connector for mains power to the unit.
This pin can also be used to power auxiliary equipment, with a maximum current of 100mA.
Pin 3 Connect to GND to activate, or leave floating (or unconnected) to deactivate.
Description
Voltage: 12V DC,
Max: 1.2W
Transistor
Output
Pin 4 Uses an open-collector NPN transistor with the emitter connected to the GND pin. If used with an external relay, a diode must be connected in parallel with the load, for protection against voltage transients.
Must not be exposed to voltages greater than 30V
DC.
Max load = <100mA
Max voltage = 24V DC (to the transistor)
Be sure to refer to the pin number above the connector before you connect to external DI/O devices.
Connect input/output devices to the camera as follows:
1. Attach the cables for the device securely to the supplied green connector block.
2. Once the cables are connected, push the connector block into the terminal
1-7
DI
DO
3.3V
DC TO DC
CONVERTER
FUSE 1A
1
2
3
EARTH GND
-
POWER INPUT
GND
DC POWER
DI
DO
3
4
1
2
NPN
SW
DIODE
RELAY
CAMERA
DEVICE
1-8
1.5 Basic Connections
Follow the procedures below to connect the IP D/N PoE PTZ Camera to the respective apparatuses.
1. Connect the power adaptor to IP D/N PoE PTZ Camera
2. Connect IP D/N PoE PTZ Camera’s Ethernet port to an Ethernet (RJ45 connectors). If your IP D/N PoE PTZ Camera has PoE built-in, you can regard it as a PD and connect it directly to a PSE device like PoE switch.
3. Connect a PC to the Ethernet hub (RJ45 connectors)
NOTE: You may find a support package for help you getting familiar with PoE. Please visit our web site, and get the support document
TS-00040.
1-9
1.6 Product Specification
1-10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project