Citizen CTD 504 Instruction manual

INSTRUCTION MANUAL
FOR
DIGITAL EAR THERMOMETER
Model:
CTD 504
(Antibacterial Model)
English
1201
❸ ❹
❷
❶
Symbol
1
2
3
4
5
6
7
❺
❻
❼
Description
Measuring Result. Displays the result in Fahrenheit or Celsius.
Low Battery Symbol. Flashes to alert the user to change the battery.
Too High Ambient Temperature. Refer to “Troubleshooting” for details.
Too Low Ambient Temperature. Refer to “Troubleshooting” for details.
Ready to Use Symbol. The CTD504 is ready to use.
Temperature Unit. The default setting is Celsius.
Memory Mode Symbol. With this symbol, the LCD screen displays the
previous result.
PRECAUTIONS (Intended Use)
1. The CTD504 is a clinical electronic thermometer that uses an infrared sensor to
detect the body temperature of people of any age from the auditory canal in a
home setting.
2. Do not use the CTD504 as a replacement for medical advice. Consult your
doctor if you have any concerns.
3. ONLY the CTD504 probe tip is waterproof. Do not immerse it in water or any other
liquid.
4. Do not drop the CTD504, and avoid any strong impact.
5. Do not use the CTD504 on any body part other than your ear.
6. Do not move or shake your body while measuring.
7. Do not use for any purpose other than the intended use. The manufacturer is not
liable for misuse.
8. The CTD504 can measure up to six times a day. To know your normal body
temperature range, we suggest you measure regularly.
9. If any damage occurs to the sensor inside the probe tip or to the unit itself,
return the product to your local distributor.
10.Keep the CTD504 away from children. Do not let them use the CTD504 on their
own. They may choke on the battery or tiny component parts by accident.
11.Install a new CR2032 lithium battery when the power is low. Use of any other
battery may lead to inaccurate results or malfunction.
– Eng 1 –
中文
Power ON/OFF Button
Start Button
LCD Screen
Sensor
Battery Cap
Probe Tip
Русский
PARTS NAMES / Display Symbols
Français Italiano Deutsch Português Español English
Instruction Manual for
Digital Ear Thermometer
Model: CTD 504 (Antibacterial Model)
1. Press the |/O button. The LCD screen displays all digital
segments.
2. If the CTD504 has saved past results, the LCD screen
automatically displays the latest result.
or
flashes with a short beep, the CTD504 is ready to use.
3. When
1. To improve accuracy, follow the illustrations below. For adults, pull the ear up
and back. For infants and children, pull the ear back.
Adults
Infants and Children
2. Fit the probe tip into the ear canal, and then press the
START button. Release the button and wait a few seconds
until you hear a long beep.
3. Take the CTD504 out of the ear canal. The LCD displays the
latest measuring result. Without any operation, the CTD504 automatically
shuts off after 1 minute.
Note: Before re-measurement, wait 1 – 3 minutes.
– Eng 2 –
(FROM
TO
).
RECALL MEMORY
1. In power-off mode, press and release the START button to
enter Memory Recall Mode. Press the START button again.
The LCD screen displays the first memory set number with
the latest measuring result.
2. Press the START button repeatedly to scroll through all 12
stored results in a loop.
ERASE MEMORY
1. While holding the START button, press and release the |/O button. The
CTD504 starts up.
2. When the LCD displays the previous measuring result, release the START
button.
3. To check memory erasing, turn the CTD504 off, and enter Memory Recall Mode
again.
BATTERY REPLACEMENT
•
flashes: You can still measure, but the accuracy may not impaired.
•
lights or no reaction at all: Change the battery as soon as possible.
Note: Change the battery away from small children and any source of heat.
1. Press the upper part of the battery cap to unlock it.
2. Insert the tip of a tool into the gap at the side of the battery
compartment. Remove the worn-out battery.
3. Insert a new CR2032 lithium battery into the CTD504,
according to the polarities in the figure. Push it firmly into
place with a “click”, then replace the cap.
– Eng 3 –
Français Italiano Deutsch Português Español English
HOW TO OPERATE
TO
1. In power-off mode, press and hold the START button for 6
seconds. When
starts flashing, release the button.
2. Press the START button again to switch from
to
.
3. Wait until the CTD504 automatically shuts off and restarts. It
is now ready to use.
中文
Important Notice:
The CTD504 does not require a probe cover during use. It is important to
clean and disinfect the CTD504 before and after each use. See “Cleaning and
Disinfection” for details.
For measurement:
• When asleep, pressure on the ear may cause higher-than-normal temperature.
Wait a few minutes, and then measure again.
• Clean your external ear before measuring. To ensure an accurate result, keep
your ear free from obstructions or excess earwax.
• The measuring results from the left and right ears may differ slightly. We
recommend measuring in the same ear.
• Before measuring, the user and the CTD504 should be in a steady room
temperature for at least 30 minutes. The user should also rest for 30 minutes
after exercising.
HOW TO SWITCH FROM
Русский
Русский
中文
Français Italiano Deutsch Português Español English
12.Without regular recalibration, the results may not be accurate. Every CTD504 is
calibrated right after production. See “Warranty and Recalibration” for details.
13.Keep the CTD504 away from sunlight and dusty places.
2. 70 % concentration alcohol swab: Available in
supermarkets.
Note: Dispose of used cotton buds and alcohol swabs in
accordance with local regulations.
◆ Cleaning : Probe area
Use a clean cotton bud to wipe off any visible dirt or ear wax. Gently wipe the area
clean.
Note: The most delicate and sensitive part of the CTD504 is the sensor inside the
probe tip. Poking it with force may cause damage to the CTD504. When cleaning,
take extra care.
Hold the CTD504 facing down to prevent water getting into the CTD504. Use an
alcohol swab to clean the probe area in a circular motion for 15 seconds (around 20
times).
•
Extreme temperatures
•
Overly humid or dry environment
•
Direct sunlight
•
Dusty places.
5. For details of environmental conditions, refer to “Specifications”. Using the
CTD504 outside the stated range may lead to inaccurate results or malfunction.
◆ Maintenance
1. Do not disassemble or change any parts of the CTD504. Such action may
reduce its accuracy.
2. Do not drop the CTD504, and avoid any strong impact.
DISINFECTION (Probe & Exterior Area)
1. Hold the CTD504 facing down to prevent water getting
into the CTD504. Use an alcohol swab to clean the probe
area in a circular motion for 15 seconds (around 20
times).
2. Then, use the same alcohol swab to wipe the exterior
area back and forth for another 15 seconds (around 20
times).
3. Wait at least 30 seconds until the CTD504 is completely
dry.
ABOUT THE EAR THERMOMETER
Normal body temperature differs by body parts, time and age. Here are two tables
for your reference:
1. Normal Body Temperature Range
Age
Site
Oral
Rectal
Continue to set units on the next page, and start measuring.
Repeat the steps above when measurement is done.
NOTE:
Do not use detergent or any strong chemicals on the CTD504.
FEVER ALERT
The CTD504 has a built-in “Fever Alert” feature.
If you have a fever between 37.5 °C – 43.0 °C (99.5 °F – 109.4 °F), the “Fever
Alert” function will inform you by a flashing result, red LED backlight, and a series
of beeps.
NOTE:
Do not use the CTD504 as a replacement for medical advice. Consult your doctor if
you have any concerns.
– Eng 4 –
Axillary
Ear
Core
0–2
years old
N/A
97.9 – 100.4 °F
36.6 – 38.0 °C
94.5 – 99.1 °F
34.7 – 37.3 °C
97.5 – 100.4 °F
36.4 – 38.0 °C
97.5 – 100.4 °F
36.4 – 38.0 °C
3 – 10
years old
95.9 – 99.5 °F
35.5 – 37.5 °C
97.9 – 100.4 °F
36.6 – 38.0 °C
96.6 – 98.0 °F
35.9 – 36.7 °C
97.0 – 100.0 °F
36.1 – 37.8 °C
97.5 – 100.0 °F
36.4 – 37.8 °C
11 – 65
years old
97.6 – 99.6 °F
36.4 – 37.6 °C
98.6 – 100.6 °F
37.0 – 38.1 °C
95.3 – 98.4 °F
35.2 – 36.9 °C
96.6 – 99.7 °F
35.9 – 37.6 °C
98.2 – 100.2 °F
36.8 – 37.9 °C
Over 65
years old
96.4 – 98.5 °F
35.8 – 36.9 °C
97.1 – 99.2 °F
36.2 – 37.3 °C
96.0 – 97.4 °F
35.6 – 36.3 °C
96.4 – 99.5 °F
35.8 – 37.5 °C
96.6 – 98.8 °F
35.8 – 37.1 °C
Source: Official Health Central, http://www.officialhealthcentral.com.
– Eng 5 –
Français Italiano Deutsch Português Español English
◆ Storage
1. If you will not use the CTD504 for over 2 months, remove the battery from the
compartment.
2. Always store the CTD504 in its container after use.
3. ONLY the CTD504 probe tip is waterproof. Do not dip it in water or any other
liquid.
4. Keep the CTD504 away from:
中文
MAINTENANCE and STORAGE
The CTD504 does not require a probe cover during use. Clean and disinfect the
CTD504 before and after each use. If you wish to share the CTD504 with others,
follow the instructions below.
◆ Preparation
1. Cotton bud: Available in supermarkets.
Русский
Français Italiano Deutsch Português Español English
中文
Русский
CLEANING INSTRUCTIONS
Result is higher than 43.0 °C (109.4 °F).
C.
➜ The user should rest in a steady room temperature for at
least 30 minutes. Then measure again.
Outside displayed temperature range II
Result is lower than 34.0 °C (93.2 °F).
➜ The user should rest in a steady room temperature for at
least 30 minutes. Then measure again.
Error symbol I
Source: 1911, Encyclopedia Britannica, 11th edition, Volume 2, Part 1, Slice 1, p95.
Disturbance occurred while measuring.
➜ Repeat the measuring steps again. If the error persists,
return the CTD504 to your local distributor.
Error symbol II
TROUBLESHOOTING
LCD screen
Description & Solution
flashes
Battery power is low, but the CTD504 can still measure.
Memory error occurred while measuring.
➜ Remove the worn-out battery. Insert a new CR2032 battery
as soon as possible. Without enough energy, the CTD504
cannot function as it should.
lights
➜ Repeat the measuring steps again. If the error persists,
return the CTD504 to your local distributor.
OTHER INFORMATION
Battery power is too low to measure.
This product conforms to the provisions of the EC directive
93/42/EEC (Medical Device Directive). And also complies
with following standards (included but not limited):
➜ Remove the worn-out battery. Insert a new CR2032 battery
as soon as possible.
Too high ambient temperature
Safety standard:
EN 60601-1 Medical electrical equipment part 1: General requirements for safety
0197
Ambient temperature is higher than 40.0 °C (104.0 °F)
EMC standard:
EN 60601-1-2 Medical electrical equipment part 1-2: General requirements for
safety- Collateral standard: Electromagnetic compatibility- Requirements and tests
➜ Leave the CTD504 in a room around 10.0 °C – 40.0 °C
(50.0 °F – 104.0 °F) for 30 minutes. Then measure again.
Too low ambient temperature
Performance standards:
EN 12470-5, Clinical thermometers - Part 5: Performance of infra-red ear
thermometers (with maximum device)
Ambient temperature is lower than 10.0 °C (50.0 °F)
➜ Leave the CTD504 in a room around 10.0 °C – 40.0 °C
(50.0 °F – 104.0 °F) for 30 minutes. Then measure again.
Follow instructions for use.
+40°C
(104°F)
+10°C
(50.0°F)
The upper and lower limits of temperature.
Keep dry.
– Eng 6 –
– Eng 7 –
Français Italiano Deutsch Português Español English
Description & Solution
Outside displayed temperature range I
中文
Deg.
F.
LCD screen
Русский
Français Italiano Deutsch Português Español English
中文
Русский
2. Figure: Diurnal Variations in Body Temperature
Hours of activity and work
Hours of rest and sleep
a.m.
p.m.
a.m.
Deg.
Recalibration Notice
We recommend that USERs bring the CTD504 to certain laboratories every 2 years
for proper recalibration.
The CTD504 does not need periodic recalibration, if the user handles it according
to this manual.
SPECIFICATIONS
To avoid inaccurate results caused by electromagnetic interference between
electrical and electronic equipments, do not use the device near a mobile phone
or microwave oven. At least keep a maximum output power of 2 w yields and a
distance 3.3m away from this equipment.
Discard the used product to the recycling collection point according to local
regulations.
Measurement method
Dimension (L × W × H)
Weight (without battery)
Measurement range
Low temperature display
High temperature display
Display resolution
Lab accuracy
HEALTH & LIFE Co., Ltd.
9F, No. 186, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan
www.healthandlife.com.tw
EMERGO EUROPE
Molenstraat 15, 2513 BH, The Hague, The Netherlands
Clinical accuracy
(repeatability)
Memory sets
Auto power off
Battery
Battery life
Русский
中文
Operating conditions
Warranty & Recalibration
Warranty For One Year from Manufacturing Date
CITIZEN SYSTEMS JAPAN Co., Ltd. grants a 1 year warranty on the product
commencing on the date of purchase. Within the limited time, we will eliminate any
defects in the appliance resulting from faults in the material or workmanship free of
charge.
Storage/Transportation
conditions
Safety classification
Accessory
Infrared
120 × 39 × 52 mm / 4.73 × 1.54 × 2.03 inch
66.80 g / 2.36 oz
34.0 °C – 43.0 °C (93.2 °F – 109.4 °F)
Temperature<34.0˚C (93.2˚F): display: L˚C (L˚F)
Temperature>43.0˚C (109.4˚F): display: H˚C (H˚F)
0.1 °C or 0.1 °F
35.5 °C – 42.0 °C (95.9 °F – 107.6 °F): ± 0.2 °C (± 0.4 °F)
Other range: ± 0.3 °C ( ± 0.5 °F)
± 0.3 °C / ± 0.5 °F
12
1 minute
CR2032 lithium battery (3V) × 1
1000 times
Temperature: 10.0 °C – 40.0 °C (50.0 °F – 104.0 °F)
Humidity: 15 % – 95 % R.H.
Temperature: -25.0 °C – 55.0 °C (-13.0 °F – 131.0 °F)
Humidity: 95 % R.H.
BF Type equipment
CR2032 lithium battery (3V) × 1
Please note that this service does not cover damage caused by misuse or abuse;
accident; the attachment of any unauthorized accessory; alteration to the product;
improper installation; unauthorized repairs or modification; improper use of
electrical/power supply; loss of power; dropped product; malfunction or damage
of an operation part due to failure to provide the manufacturer’s recommended
maintenance; transportation damage; theft; neglect; vandalism; or environmental
conditions; loss of use during the period the product is at a repair facility or
otherwise awaiting parts or repair; or any other conditions whatsoever that are
beyond the control of the importers or distributors.
– Eng 8 –
– Eng 9 –
Français Italiano Deutsch Português Español English
-
Every CTD504 is properly calibrated right after production.
Internally powered equipment
BF type applied part
IPX0
Not suitable for use in presence of flammable anesthetic mixture with air or with
oxygen or nitrous oxide
Continuous operation with short-time loading
中文
-
Русский
Français Italiano Deutsch Português Español English
BF Classification:
• CITIZEN is a registered trade mark of Citizen Holdings Co., Japan.
• Design and Specification are subject to change without notice.
Distributed by: