Chauvet Colordash User manual

Add to my manuals
21 Pages

advertisement

Chauvet Colordash User manual | Manualzz

User Manual

Edition Notes

Edition

Notes

The COLORdash™ Accent User Manual Rev. 5 covers the description, safety precautions, installation, programming, operation, and maintenance of the COLORdash™ Accent.

CHAUVET® released this edition of the COLORdash™ Accent User Manual in August 2014.

Trademarks

CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or

Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted triangle, and all other trademarks in this manual pertaining to services, products, or marketing statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other product names, logos, brands, company names, and other trademarks featured or referred to within this document are the property of their respective trademark holders.

Copyright Notice

CHAUVET® owns the content of this User Manual in its entirety, including but not limited to pictures, logos, trademarks, and resources.

© Copyright 2014 CHAUVET®. All rights reserved.

Electronically published by CHAUVET® in the United States of America.

Manual Use

CHAUVET® authorizes its customers to download and print this manual for professional information purposes only. CHAUVET® expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from CHAUVET®.

Document

Printing

For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.

Intended

Audience

Any person in charge of installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer

CHAUVET® believes that the information contained in this manual is accurate in all respects.

However, CHAUVET® assumes no responsibility for any errors or omissions in this document.

CHAUVET® reserves the right to revise and make changes to the content of this document without obligation that CHAUVET® notify any person or company of such revision or changes.

This does not in any way constitute a commitment by CHAUVET® to make such changes.

CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.

Document

Revision

The COLORdash™ Accent User Manual Rev. 5 supersedes all previous versions of this manual. Discard any older versions of this manual and replace with this version. Go to www.chauvetprofessional.com

for the latest version.

Author

D. Couppe

Date

8/1/14

Editor

A. Leon

Date

8/1/14

COLORdash™ Accent User Manual Rev. 5

Table of Contents

Table of Contents

1. Before You Begin ...................................................................................................................................... 1

What Is Included ........................................................................................................................................................... 1

Claims .......................................................................................................................................................................................... 1

Manual Conventions .................................................................................................................................................................... 1

Symbols ....................................................................................................................................................................................... 1

Product At A Glance ..................................................................................................................................................... 2

Safety Notes ................................................................................................................................................................. 2

Personal Safety ............................................................................................................................................................................ 2

Mounting And Rigging .................................................................................................................................................................. 2

Power And Wiring ........................................................................................................................................................................ 2

Operation ..................................................................................................................................................................................... 2

Expected LED Lifespan ................................................................................................................................................ 2

2. Introduction ............................................................................................................................................... 3

Description .................................................................................................................................................................... 3

Features ........................................................................................................................................................................ 3

Overview ....................................................................................................................................................................... 4

Dimensions ................................................................................................................................................................... 5

3. Setup .......................................................................................................................................................... 6

AC Power ...................................................................................................................................................................... 6

AC Plug ........................................................................................................................................................................................ 6

DMX Linking.................................................................................................................................................................. 7

DMX Personalities ........................................................................................................................................................................ 7

Master/Slave Connectivity ............................................................................................................................................................ 7

Mounting ....................................................................................................................................................................... 8

Orientation ................................................................................................................................................................................... 8

Rigging ......................................................................................................................................................................................... 8

Procedure .................................................................................................................................................................................... 8

4. Operation ................................................................................................................................................... 9

Control Panel Description ............................................................................................................................................. 9

Control Options ............................................................................................................................................................. 9

Dip Switch Assignments ............................................................................................................................................................... 9

Operation Modes ........................................................................................................................................................ 10

Programming .............................................................................................................................................................. 10

Starting Address ......................................................................................................................................................................... 10

Procedure .................................................................................................................................................................................. 10

STATIC Mode ............................................................................................................................................................. 11

STATIC Mode Configuration ...................................................................................................................................................... 11

Procedure .................................................................................................................................................................................. 11

AUTO Mode ................................................................................................................................................................ 11

Procedure .................................................................................................................................................................................. 11

DMX Values ................................................................................................................................................................ 12

DMX Values (Cont.) .................................................................................................................................................... 13

-i- COLORdash™ Accent User Manual Rev. 5

Table of Contents

5. Technical Information ............................................................................................................................. 14

Product Maintenance .................................................................................................................................................. 14

6. Technical Specifications ......................................................................................................................... 15

Returns ....................................................................................................................................................................... 16

Contact Us ................................................................................................................................................... 17

-ii- COLORdash™ Accent User Manual Rev. 5

Before You Begin

1.

B

EFORE

Y

OU

B

EGIN

What Is

Included

· COLORdash™ Accent

· Warranty Card

· Quick Reference Guide

Claims

Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery.

Manual

Conventions

Convention Meaning

1512

50/60

[10]

<SET>

A range of values in the text

A set of mutually exclusive values in the text

A DIP switch to be configured

A button on the product’s control panel

Settings A product function or a menu option

MENU>Settings A sequence of menu options

1–10

Yes/No

ON

A range of menu values from which to choose in a menu

A set of two mutually exclusive menu options in a menu

A unique value to be entered or selected in a menu

Symbols

Symbols Meaning

Critical installation, configuration, or operation information. Failure to comply with this information may cause the product not to work, damage third-party equipment, or cause harm to the operator.

Important installation or configuration information. Failure to comply with this information may keep the product from working.

Useful information.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.

-1- COLORdash™ Accent User Manual Rev. 5

Before You Begin

Product At A

Glance

Use on Dimmer

Outdoor Use

Master/Slave

DMX x

Auto Programs x Auto-Ranging Power

Supply

P Replaceable

Fuse/Breaker

P

User-Serviceable

P

P x x

Safety Notes

Read all the following Safety Notes before working with this product. These notes include important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained CHAUVET® certified technicians. Do not open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

Personal Safety

· Avoid direct eye exposure to the light source while the product is on.

· Always disconnect this product from its power source before servicing.

· Always connect this product to a grounded circuit to avoid the risk of electrocution.

· Do not touch this product’s housing during operation because it may be very hot.

Mounting And

Rigging

· The product is not intended for permanent installation.

· This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture. (IP20)

· Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

· Make sure there are no flammable materials close to this product while it is operating.

· When hanging this product, always secure to a fastening device using a safety cable

Power And

(included).

· Always make sure you are connecting this product to the proper voltage in accordance with

Wiring

the specifications in this manual or on the product’s specification label.

· Never connect this product to a dimmer pack or rheostat.

· Never disconnect this product by pulling or tugging on the power cable.

Operation

· Do not operate this product if you see damage on the housing, lenses, or cables. Have the damaged parts replaced by an authorized technician at once.

· Do not cover the ventilation slots when operating to avoid internal overheating.

· The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a higher temperature.

· In case of a serious operating problem, stop using this product immediately!

In the unlikely event that your CHAUVET® product may require service, contact

CHAUVET® Technical Support.

Expected LED

Lifespan

LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,

LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.

Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by improving the ventilation around the product and reducing the ambient temperature to an optimal operating range. In addition, limiting the overall projection intensity may also help to extend the LEDs’ lifespan.

-2- COLORdash™ Accent User Manual Rev. 5

Introduction

2.

I

NTRODUCTION

Description

The COLORdash™ Accent is a small LED-based, DMX controllable, wash light designed for indoor applications.

The COLORdash™ Accent is a high-power, high luminance LED wash product. This product consists of a small aluminum casing that houses the internal power supply, the main control, the control panel, the LED drivers, the LED boards, as well as the power and signal connectors. The

COLORdash™ Accent includes one double-bracketed yoke that can be both a floor mount and hanging support.

Features

· 3-, 4-, or 9-channel RGBW LED wash product

· Operating modes:

· 3-channel: RGB control

· 4-channel: RGBW

· 9-channel: RGBW, dimmer, strobe, macro, auto, auto speed

· RGBW color mixing with or without DMX controller

· Direct DMX input and output

· Automatic programs with or without DMX controller

· Static control with or without DMX controller

· 0–100% dimmer

· Macros

· Master/Slave operation

· Lightweight, black aluminum casing

· Natural convection cooling (no fans)

· High power (1 W, 350 mA) LEDs

· Double-bracketed yoke that doubles as a floor stand

COLORdash™ Accent User Manual Rev. 5 -3-

Introduction

Overview

-4-

LED (7)

Front View

Control Panel

Rear View

Bracket

Adjustment Knob

Power In

Top View

3- Pin

DMX

In/Out

Double-Bracketed

Yoke

Side View

COLORdash™ Accent User Manual Rev. 5

Dimensions

2.5 in

65 mm

COLORdash™ Accent User Manual Rev. 5

6.9 in

174 mm

4.3 in

108 mm

Introduction

-5-

Setup

3.

S

ETUP

AC Power

Each COLORdash™ Accent has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each

COLORdash™ Accent, refer to the label affixed to the product. You can also refer to the

Technical Specifications chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetlighting.com/download/pro .

Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The COLORdash™ Accent comes with a hard-wired power input cord terminated with an

Edison plug. The product side of this power cord enters the product through a strain reliever

(rubber boot) and it cannot be disconnected from the product. If the power input cord that came with your product has no plug, or if you need to change the Edison plug, use the table below to wire the new plug.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live

AC Neutral

AC Ground

Black

White

Green/Yellow

Brown

Blue

Green/Yellow

Yellow or Brass

Silver

Green

-6- COLORdash™ Accent User Manual Rev. 5

Setup

DMX Linking

You can link the COLORdash™ Accent to a DMX controller using a 3-pin DMX connection. If using other DMX-compatible products with the COLORdash™ Accent, you can control each individually with a single DMX controller.

DMX

Personalities

The COLORdash™ Accent uses a 3-pin DMX data connection for the STAGE1, ARC.1, and

ARC.2 DMX personalities.

· Refer to the

Introduction chapter for a brief description of each DMX personality.

· Refer to the

Operation chapter to learn how to configure the COLORdash™ Accent to work

in these personalities.

· The

DMX Values section provides you with detailed information regarding the DMX personalities.

If you are not familiar with or need more information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the CHAUVET® website: www.chauvetlighting.com/download/pro .

Master/Slave

Connectivity

The Master/Slave mode allows a COLORdash™ Accent (the master) to control one or more

COLORdash™ Accents (the slaves) without a DMX controller. One COLORdash™ Accent becomes the master when running an auto program, or by being in a Static mode.

You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation, the slaves will operate in unison with the master.

DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX controller signals may interfere with the signals from the master.

The Operation section of this manual provides detailed instructions on how to configure

the master and slaves.

COLORdash™ Accent User Manual Rev. 5 -7-

Setup

Mounting

Before mounting this product, read and follow the Safety Notes . For our CHAUVET® line of

mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/ .

Orientation

Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance.

Rigging

CHAUVET® recommends using the following general guidelines when mounting this product.

· When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.

· The product is not intended for permanent installation.

· Make sure to mount this product away from any flammable material as indicated in the

Safety Notes .

· Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.

· If hanging this product, make sure that the mounting location can support the product’s

weight. See the Technical Specifications for the weight-bearing requirements of this

product.

· When hanging this product, always secure to a fastening device using a safety cable. For our CHAUVET® line of safety cables, go to http://trusst.com/productcategory/base-platesaccessories-clamps/ .

Procedure

The COLORdash™ Accent comes with a double-bracketed yoke to which you can either attach mounting clamps for hanging or simply use as a floor stand. You must supply your own mounting clamps. Make sure the clamps are capable of supporting the weight of this product.

Use at least one mounting point per product. For our CHAUVET® line of mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/ .

Mounting Diagram

Floor Mounting

Clamp

Overhead Mounting

Safety

Cable

-8- COLORdash™ Accent User Manual Rev. 5

Operation

4.

O

PERATION

Control Panel

Description

The COLORdash™ Accent has a basic control panel, which consists of a single 12-switch dual in-line package (DIP) switch module. Each of the individual switches has a number (DIP switch

[1] through [12]).

The only function of DIP switches [10] through [12] is to set the product’s operation mode. The function of DIP switches [1] to [9] will vary depending on which operation mode you have selected. The diagram below shows the DIP Switch Assignments

. The Operation Modes table

shows the DIP switch setting to enable the various operating modes for the COLORdash™

Accent.

Control

Options

You can set the COLORdash™ Accent starting address in the 001512 DMX range. This enables control of up to 56 products in the 9-channel STAGE1 personality.

Dip Switch

Assignments

On

Position

Off

Position

DIP Switches [1] to [9]

DMX Address Selection

(When DMX Mode is active)

DIP Switches [1] to [8]

Color Intensity

(When STATIC Mode is active)

DIP Switches [1] to [5]

AUTO Programs Selection

(When AUTO Mode is active)

DIP Switches [10] to [12]

Operation Mode

Selection

(See table below)

· When the product is in DMX mode, DIP switches [1] to [9] define the product’s starting address.

· When the product is in AUTO mode, DIP switches [1] to [5] determine which program will run.

· When the product is in STATIC mode, DIP switches [1] to [8] determine the intensity of the LEDs by color.

-9- COLORdash™ Accent User Manual Rev. 5

Operation

Operation

Modes

DIP 10 DIP 11 DIP 12

On Off On STATIC (Master)

Off

On

Off

Off

On

Off

AUTO (Master)

Slave

Off

On

Off

On

On

Off

Off

Off

Off

ARC.1

ARC.2

STAGE1

Function

Programming

It is possible to change the product’s various operation modes, DMX address, Auto, or Static mode settings while the product is on. Always make sure that you have clear access to the DIP switches on the back of the product for easier product changes.

Starting Address

When any of the DMX modes is active as per the Operation Modes Table, you may select the product’s starting DMX address (001512) by setting DIP switches [1] through [9] as per the table below.

DIP Switch 1 2 3 4 5 6 7 8 9

Value 1 2 4 8 16 32 64 128 256

Procedure

1. Set DIP switches [10] through [12] to select a DMX operation mode, as per the Operation

Modes Table .

2. Select the desired starting address (001512) by setting DIP switches [1] through [9] to ON or OFF until the sum of the value of the DIP switches in the ON position matches the desired address number.

3. Refer to the examples below for more information.

Starting Address

Examples

These three examples are for STAGE1 DMX mode. Therefore, in all three cases, DIP switches

[10], [11], and [12] are set to OFF. a. To select DMX Address 1, set DIP switch [1] to ON. b. To select DMX Address 64, set DIP switch [7] to ON. c. To select DMX Address 31, set DIP switches [1], [2], [3], [4], and [5] to ON

( 1+ 2 + 4 + 8 + 16 = 31).

If you are not familiar with or need more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the CHAUVET® website: www.chauvetlighting.com/download/pro .

-10- COLORdash™ Accent User Manual Rev. 5

Operation

STATIC Mode

When selecting the Static mode, the COLORdash™ Accent can be set up to various colors and intensities without a DMX controller by using DIP switches [1] through [8] as per the tables below.

STATIC Mode

Configuration

Red Green Blue White

DIP Switch [1] [2] [3] [4] [5] [6] [7] [8]

0 %

30 %

60 %

100 %

Off

On

Off

On

Off

Off

On

On

Off

On

Off

On

Off

Off

On

On

Off

On

Off

On

Off

Off

On

On

Off

On

Off

On

Off

Off

On

On

Procedure

1. Set DIP switches [10] and [12] to ON, and DIP switch [11] to OFF to select Static Mode.

2. Select the color intensity as indicated in the STATIC Mode Configuration table above.

AUTO Mode

Auto Mode allows the user to select one of the 32 preset programs (0–31) on each individual

COLORdash™ Accent.

Dip Switch [1] [2] [3] [4] [5]

Value 1 2 4 8 16

Procedure

1. Set DIP switches [10] and [11] to OFF, and DIP switch [12] to ON (Auto Mode).

2. Select the desired program (0–31) by setting DIP switches [1] through [5] to ON or OFF until the sum of the value of the DIP switches in the ON position matches the desired program number.

3. Refer to the examples below for more information. a. To select Auto program 0, set DIP switches [1] through [5] to OFF and DIP switch [12] to ON.

Auto Mode

Examples b. To select Auto program 9, set DIP switches [1], [4], and [12] to ON.

Master/Slave

The Master/Slave mode allows a group of COLORdash™ Accents (the slave products) to simultaneously duplicate the output of another COLORdash™ Accent (the master product) without a DMX controller. a. Connect all COLORdash™ Accents in a daisy chain.

b. Set up the first product in the daisy chain (Master) as explained in STATIC Mode or

AUTO Mode .

c. On the rest of the COLORdash™ Accents, set DIP switch [10] to ON.

· The master product is the one that runs a program whether in Auto or Static mode.

· Do not connect a DMX controller to the products configured for Master/Slave operation. The DMX controller may interfere with signals from the master product.

· The master product should be the first product in the daisy chain.

COLORdash™ Accent User Manual Rev. 5 -11-

Operation

DMX Values

STAGE1 Channel

1

2

3

4

5

6

7

Function

Dimmer

Red

Green

Blue

White

Color Macro + White

Balance

Strobe

Value Percent/Setting

000 ó255 0–100%

000 ó255 0–100%

000 ó255 0–100%

000 ó255 0–100%

000 ó255 0–100%

000 ó010

011 ó035

036 ó060

061 ó085

086 ó110

111 ó135

136 ó160

161 ó185

186 ó210

211 ó215

216 ó220

221 ó225

226 ó230

231 ó235

236 ó240

241 ó245

246 ó250

251 ó255

000 ó009

010 ó255

No Function

0–20 Hz

No function

R: 100% G: 0-100% B: 0

R: 100%-0 G: 100% B: 0

R: 0 G: 100% B: 0-100%

R: 0 G: 100%-0 B: 100%

R: 0-100% G: 0 B: 100%

R: 100%

R: 100%

G: 0 B: 100%-0

G: 0-100% B: 0-100%

R: 100%-0 G: 100%-0 B: 100%

White 1

White 2

White 3

White 4

White 5

White 6

White 7

White 8

White 9

-12- COLORdash™ Accent User Manual Rev. 5

Operation

DMX Values (Cont.)

STAGE1

(Cont.)

Channel

8

9

Function

Programs

Auto Speed

ARC.1

Channel

1

2

3

Red

Green

Blue

Function

ARC.2

Channel

1

2

3

4

Red

Green

Blue

White

Function

Value Percent/Setting

171 ó180

181 ó190

191 ó200

201 ó210

211 ó220

221 ó223

224 ó226

227 ó229

230 ó232

233 ó235

236 ó238

239 ó241

242 ó244

245 ó247

248 ó250

251 ó253

254 ó255

000 ó020

021 ó030

031 ó040

041 ó050

051 ó060

061 ó070

071 ó080

081 ó090

091 ó100

101 ó110

111 ó120

121 ó130

131 ó140

141 ó150

151 ó160

161 ó170

No Function

Auto 0

Auto 1

Auto 2

Auto 3

Auto 4

Auto 5

Auto 6

Auto 7

Auto 8

Auto 9

Auto 10

Auto 11

Auto 12

Auto 13

Auto 14

Auto 15

Auto 16

Auto 17

Auto 18

Auto 19

Auto 20 (Red)

Auto 21 (Red & Green)

Auto 22 (Red & Blue)

Auto 23 (Red & White)

Auto 24 (Green)

Auto 25 (Green & Blue)

Auto 26 (Green & White)

Auto 27 (Blue)

Auto 28 (Blue & White)

Auto 29 (White)

Auto 30 (Red & Green & Blue)

Auto 31 (Red & Green & Blue & White)

000 ó255 Only when Auto 0–19 in Ch. 8 is activated

Percent/Setting Value

000 ó255 0–100%

000 ó255 0–100%

000 ó255 0–100%

Value

000 ó255 0–100%

000 ó255 0–100%

000 ó255 0–100%

000 ó255 0–100%

Percent/Setting

COLORdash™ Accent User Manual Rev. 5 -13-

Technical Information

5.

T

ECHNICAL

I

NFORMATION

Product

Maintenance

To maintain optimum performance and minimize wear, you should clean this product frequently.

Usage and environment are contributing factors in determining the cleaning frequency.

As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear.

To clean your product:

1. Unplug the product from power.

2. Wait until the product is at room temperature.

3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents.

4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl alcohol.

5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

6. Wipe any dirt or grime to the outside edges of the lens surface.

7. Gently polish the lens surfaces until they are free of haze and lint.

Always dry the external surfaces thoroughly and carefully after cleaning them.

-14- COLORdash™ Accent User Manual Rev. 5

Technical Specifications

6.

T

ECHNICAL

S

PECIFICATIONS

Dimensions and

Weight

Length Width

6.9 in (174 mm) 4.3 in (108 mm)

Height

2.5 in (65 mm)

Weight

1.5 lb (0.6 kg)

Note: Dimensions in inches rounded to the nearest decimal digit.

Power

Power Supply Type Range Voltage Selection

Light Source

Photo Optic

Switching (internal)

Parameter

Consumption

Current

Power I/O

Power input connector

Power cord plug

Type

LED

Color

Red

Green

Blue

White

Parameter

Illuminance @ 5 m

Beam angle

Field angle

Thermal Max. External Temperature

DMX

113 °F (45 °C)

I/O Connectors

3-pin XLR

Ordering

Product Name

COLORdash™ Accent

100–240 VAC, 50/60 Hz

120 VAC, 60 Hz

10 W

0.1 A

U.S./Canada

Hard-wired

Edison (U.S.)

Power

1 W

Quantity

2

2

2

1

Standard 18º Optics

153 lux

20°

37.5°

Cooling System

Convection

Connector Type

Sockets

Item Code

01030111

Auto-ranging

230 VAC, 50 Hz

10 W

0.1 A

Worldwide

Hard-wired

Local plug

Lifespan

50,000 hours

Current

350 mA

350 mA

350 mA

350 mA

Channel Range

3, 4 or 9

UPC Number

781462203825

-15- COLORdash™ Accent User Manual Rev. 5

Technical Specifications

Returns

You must send the product prepaid, in the original box, and with the original packing and accessories. CHAUVET® will not issue call tags.

Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return.

Clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.

DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.

Once you have received the RMA number, include the following information on a piece of paper inside the box:

· Your name

· Your address

· Your phone number

· The RMA number

· A brief description of the problem(s)

Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. FedEx packing or double-boxing is recommended.

CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s).

-16- COLORdash™ Accent User Manual Rev. 5

C

ONTACT

U

S

WORLD HEADQUARTERS - CHAUVET®

General Information

Address:5200 NW 108th Avenue

Sunrise, FL 33351

Voice: (954) 577-4455

Fax: (954) 929-5560

Toll free:(800) 762-1084

Technical Support

Voice: (954) 577-4455 (Press 4)

Fax:

Email:

(954) 756-8015 [email protected]

World Wide Web

UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd. www.chauvetlighting.com

General Information

Address:Unit 1C

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK

NG16 6NT

Voice: +44 (0)1773 511115

Fax: +44 (0)1773 511110

MEXICO - CHAUVET® Mexico

Technical Support

Email: [email protected]

World Wide Web www.chauvetlighting.co.uk

General Information

Address:Av. Santa Ana 30

Parque Industrial Lerma

Lerma, Mexico C.P. 52000

Voice: +52 (728) 285-5000

Technical Support

Email: [email protected]

World Wide Web www.chauvet.com.mx

Outside the U.S., United Kingdom, Ireland, or Mexico, contact the dealer of record. Follow their instructions to request support or to return a product. Visit our website for contact details.

COLORdash™ Accent User Manual Rev. 5

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals