Barco Encore VPx Quick Start Guide

Barco, Inc.
Toll Free:
Fax:
Technical Support:
Website:
Encore VPx
Quick Start Guide
Visibly yours
+1 (888) 414-7226
+1 (916) 859-2515
+1 (866) 374-7878
www.barco.com
Encore VPx — Rear Panel
Program Link Out
Program 2 Out DVI
Connect to a standard DVI
monitor. Identical to Program
1 Out DVI, but without edge
feathering and data doubling.
Preview Out
Analog
Connect to standard
VGA monitor
In wide screen configurations,
connect to Program Link In
on next VP or VPx
Connect to projector.
Includes edge feathering
and data doubling.
Connect to a standard VGA
monitor. Identical to Program
1 Out Analog, but without edge
feathering and data doubling.
Connect to a DVIcapable monitor
PREVIEW
ANALOG
ANALOG
PROGRAM 2
In User’s Guide, see “Program and
Source Link Connections” section for
cabling configurations
HD/SDI Program Out
Connect to HD or SDI
monitor, or distribution
Program 2 Out Analog
Preview Out DVI
DVI
Program 1 Out
Analog
Program 1 Out DVI
If output is set to NTSC or PAL (SDI)
or 720p or 1080i (HD/SDI), all output
connectors will output that
selected resolution.
Connect to projector.
Includes edge feathering
and data doubling.
DVI
DVI
PROGRAM 1
ANALOG
HD / SDI
OUT
Program Link In
Ethernet Port
In wide screen configurations,
connect to Program Link Out
from previous VP or VPx
Connect to Ethernet
Switch on an
isolated network.
PROGRAM LINK
Unit ID
IN
ETHERNET
Connect analog or
DVI DSK
M/E 1
Connect analog or
DVI DSK
INPUT 1A
INPUT 1B
DVI
OUT
SOURCE LINK 1
IN
1
DVI
Sets the
Processor’s
unique ID.
Physical 0 – 15
= logical 1 - 16
UNIT ID
M/E 2
INPUT 2A
AC
INPUT 2B
DVI
OUT
SOURCE LINK 2
IN
Serial Port
DVI
Factory use only
Connect analog or
DVI Background A
M/E 3
INPUT 3B
DVI
Connect to DVI source or DVI router
Via HD-15 to DVI adapter, connect to
analog source or analog router
Connect to AC
power source
Connect analog or
DVI Background B
INPUT 3A
Layer A
DVI In
SERIAL
OUT
SOURCE LINK 3
IN
Source Link Out
Source Link In
To loop inputs in wide
screen configurations,
connect to next VP or
VPx Source Link In
To loop inputs in wide
screen configurations,
connect to previous VP
or VPx Source Link Out
An M/E’s Source Link Out must always be connected to its associated
M/E Source Link In on the next VP or VPx, and never cross-routed.
DVI
Layer B
DVI In
Connect to DVI source or DVI router
Via HD-15 to DVI adapter, connect to
analog source or analog router
NOTE
For a description of the Encore
VP rear panel, refer to the
Encore Quick Start Guide or
the Encore Presentation
System User’s Guide.
P/N 26-0311104-00 Rev 01
Barco, Inc.
Toll Free:
Fax:
Technical Support:
Website:
Encore VPx
Visibly yours
Quick Start Guide
Sample System — Wide Screen Configuration + VPx
•
•
•
•
•
Non-stack system, up to 6 layers
1 x 3 M/E VP, 2 x 3 M/E VPx
1 x SDI Router
1 x RGBHV Router
4 destinations:
1)
3 Projector wide screen
2, 3) Aux Monitors
4)
ImagePRO Aux
Ethernet Switch
Preview 1
IMPORTANT
Software version 1.22 (or higher)
must be installed in the
Controller, prior to connecting
your VPx processor(s).
Ethernet Switch
Controller SC or LC
(Local Network Only)
Destination 1 — Widescreen
Program 3
Preview 2
• Non-stack system, up to 6 layers
• 1 x 3 M/E VP, 3 x 3 M/E VPx
• 2 destinations:
1) 3 Projector wide screen
2) VP or VPx #4, Widescreen
Preview Processor
Controller SC or LC
(Local Network Only)
Program 2
Program 1
Sample System — Wide Screen Preview Configuration + VPx
Software version 1.22 (or higher)
must be installed in the
Controller, prior to connecting
your VPx processor(s).
IMPORTANT
+1 (888) 414-7226
+1 (916) 859-2515
+1 (866) 374-7878
www.barco.com
Destination 1 — Widescreen
Preview 3
Widescreen Program
Widescreen Preview
In
PCs (DVI)
Triple Head
Graphics Cards
VP #1
Out
Note: #1 is VP only, not VPx
PVW
PG 2 (DVI)
Unscaled
Sources
PVW (Analog)
PVW (DVI)
PG 1
DSK
VP or VPx #2
Out
Program
Link
Source
Link
VP or VPx #2
Program
Link
Destination 2 — VP or VPx
1A
1B
2A
2B
3A
3B
PVW
PG 1
PG 2 (Analog)
1 x DSK
PVW
1-6
7
PG 2 (DVI)
Unscaled
Sources
PVW (Analog)
PVW (DVI)
PG 1
1 x Bgnd
ImagePRO
PG 1
Up to 16 Analog Inputs
VP or VPx #3
Program
Link
Source
Link
VP or VPx #3
Program
Link
Source
Link
PG 2 (Analog)
1 x DSK
PG 2
1-6
7
Scaler
Inputs
Note: DVI connections only
Source
Link
PG 2
16 x 16 MatrixPRO RGBHV Router
Out
PG 2 (Analog)
PG 1
1 x Bgnd
16 x 16 MatrixPRO SDI Router
Note: #1 is VP only, not VPx
PG 2
6 x SDI
Up to 16 SDI Inputs
VP #1
Scaled
Sources
1 x DSK
6 x RGBHV
Background
In
PVW
PG 1
1 x Bgnd
Video Recorder
PG 2 (DVI)
Unscaled
Sources
PVW (Analog)
PVW (DVI)
PG 1
8
9
Destination 4: ImagePRO Aux
Encore Presentation System User’s Guide
Destination
2
Destination
3
VGA
Monitors
DVR
For complete details on all installation, setup, configuration and operations procedures, please refer to
the Encore Presentation System User’s Guide.
P/N 26-0311104-00 Rev 01