advertisement
185_38 english manual main.pdf 14. 4. 2009 14:13:38
HD READY DIGITAL LCD TV
USER GUIDE
18.5” Model
X185/38B-GB-TCD-UK
X185/38B-GB-TC-UK
blank.pdf 19. 12. 2008 11:10:05
26_29 english manual 01.pdf 10. 2. 2009 13:55:22
Important Guarantee Information.
Congratulations on purchasing this television. We hope you have many years of trouble free enjoyment from your purchase.
Your product is covered under the manufacturers guarantee for 12 months from date of purchase. The guarantee is ‘return to manufacturer’ and covers the costs of collection, parts & labour and redelivery charges in the event of breakdown caused by mechanical or electrical failure.
In the event of a fault being diagnosed, please refer to the frequently asked questions/troubleshooting section at the rear of this user guide.
If you are still unable to remedy the fault, try resetting the TV to factory settings, (details in this user guide) or contact the helpline.
In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home or work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Sky Media UK LTD – Helpline Information
Telephone 0871 2000 463
Email: [email protected]
Internet: www.skymediauk.co.uk
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
On the web site, you can register your product and guarantee, if you do it within 7 days of purchase, you will also receive an extra FREE
3 months warranty, making the warranty 15 months from date of purchase.
You must retain all packaging materials as you will need these in the event of warranty/service support.
If you need to call the helpline, you will need the following information.
Model Number __________________________ (Can be found on rear of TV)
Serial Number __________________________ (Can be found on rear of TV)
Date of purchase __________________________ (Can be found on sales receipt)
1
2
19_22_37 english manual 02.pdf 12. 2. 2009 14:50:23
19_22_37 english manual 03.pdf 12. 2. 2009 14:51:21
Important information regarding the digital TV switchover
Television in the UK is going digital, bringing us all more choice and new services. Starting late
2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
How the switchover affects your TV equipment.
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by simply connecting it into your aerial socket (you can check if you can get digital TV through your aerial now or whether you will have to wait until the switchover at www.digitaluk.co.uk)
When the TV switchover happens in your area, there are at least two occasions when you will need to re-tune your TV in order to continue receiving your existing TV channels and also to pick up new ones. Digital UK, the body leading the digital switchover, will advise you when you need to retune during the switchover.
How to retune.
Retuning your TV is a very quick and simple process. We recommend that you retune every few months to ensure you are receiving the very latest TV and radio channels that are broadcast.
• In digital/freeview mode, on the remote control press ‘LCD menu’ quickly followed by 8-8-8-8 (so
press the number 8 four times)
• You will now enter the ‘First time installation’ mode. (if you do not, please refer to the section
called ‘getting started’ later in this user guide)
First Time Installation
Country
Language
UK
English
Please ensure that the aerial is connected to the connector labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is highlighted in yellow and press ‘OK’ on your remote .If after this scan ,not all digital channels are found ,your aerial may require a signal booster .alternatively ,upgrade your aerial to a high gain digital version .
OK Cancel
• Simply press ‘OK’ or ‘Enter’ on the remote control and your TV will retune.
If you do not retune your TV when advised to do so by Digital UK, you may lose some or all of your channels until you do re-tune.
If you are missing any channels, it may be that they are not available in your area, or that your TV aerial needs upgrading.
For help and support regarding the digital switchover, please contact Digital UK:
Telephone: 08456 50 50 50
Digital UK website: www.digitaluk.co.uk
If you require technical or warranty support on this television, please contact the manufacturer helpline, do not contact Digital UK unless your query is regarding the digital switchover.
3
4 tesco english manual 19_14 page Page 1 19. 12. 2008 11:15:51
WARNINGS
Caution
This television contains no user serviceable parts. Please refer to the manufacturer or authorised repair agent in the event of malfunction. Do not remove the back cover from the television.
Warning
To reduce the risk of fire, electric shock or damage to the television, do not expose it to dust, rain or moisture, or place any objects filled with liquids on or near the television.
Do not place the television in a confined space, ensure that nothing can obstruct the ventilation openings at the rear of the television.
Do not place naked flames on or near the television.
Dispose of this television and any components including batteries in an environmentally friendly manner. If in doubt, please contact your local authority for details of recycling.
Your LCD TV should be cleaned using a dry or slightly damp cloth. You should not use an alcohol based cleaner
Safety
For your safety, this appliance is fitted with a fused moulded 3 pin mains plug. Should the fuse need to be replaced, ensure that any replacement is of the same amperage and approved with the BSI mark. ( )
Never try and replace the mains plug unless you have adequate qualifications and are legally authorised to do so. In the event that a replacement Mains cable is required, contact the manufacturer for a suitable replacement.
Never use the television if it is damaged in any way.
Always place the television on a flat level surface avoiding anywhere which may be subject to strong vibration. Ensure the television is not placed on top of the power cable as the weight of the television may damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any other device which may cause magnetic or radio interference with the television. If interference is apparent, move the device causing the interference away from the television.
Packaging
Please save the packaging for the television as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in its original box/packaging
19_22_37 english manual 05.pdf 12. 2. 2009 14:53:08
Examples of images that you need to be aware of are as follows
5
blank.pdf 19. 12. 2008 11:10:05
185_38 english manual 07.pdf 27. 4. 2009 8:42:11
CONTENTS
SETTING UP YOUR TV
- What is included in the box
- Attaching/Removing
the stand & wall mounting
- Tuning in TV
- Digital Switchover Re-Tune
- Remote control buttons and their
functions
- TV buttons and their functions
- Inputs and Connections
- Choosing Mode/Source
8
9
10
10
11
12
13
13
TV MENU OPERATION
PICTURE SETTINGS MENU
- Selecting Picture Mode Preset
- Adjusting Contrast
- Adjusting Brightness
- Adjusting Colour
- Adjusting Tint
- Adjusting Sharpness
- Adjusting Colour Temperature
- Dynamic Noise Reduction
SOUND SETTINGS MENU
- Adjusting Volume
- Selecting Sound Mode Preset
- Adjusting Bass
- Adjusting Treble
- Adjusting Balance
TUNING SETTINGS MENU
- Adjusting Country
- Auto Tuning
- Manual Tuning
- Program Edit / Changing Channel
Position
- Common Inferface Slot
TIMER SETTINGS MENU
- Sleep Timer
- On Screen Display Timer
GENERAL SETTINGS MENU
- On Screen Menu Language
- Adjusting Picture Format
- Blue Screen
- System Lock
19
19
- First Time Installation 20
- Reset television to factory settings 20
17
18
18
18
18
19 - 20
19
19
16
16
16
17
15
16
16
16
14
15
15
15
14 - 15
14
14
14
17
17
17
CHANNEL SERVICES
- Using 7 day TV guide
- Using Digital TV teletext
- Using Analogue TV teletext
20
20
21
PC OPERATION
- Connecting to a PC 22
- Auto Configuration of Screen 23
- Adjusting Phase 23
- Adjusting Clock
- Adjusting Vertical Position
- Position Reset
23
- Adjusting Horizontal Position 23
23
23
DVD MENU OPERATION
SYSTEM SETUP
- Adjusting TV System
AUDIO SETUP
24
- Adjusting Picture Format
CHANGING REGIONS
24
24
- Returning to Default 24
- Adjusting Tone
DIGITAL SETUP
25
25
25
25
- Adjusting Dynamic Range 25
- Adjusting the Sound 25
GENERAL INFORMATION
- Using with Sky Digital 26
- Connecting a Games Console 27
- Frequently Asked Questions 28
- Technical Specifications 29
- Index 30
If you experience any problems with this Television,
Please contact the helpline.
Customer Support/Technical Helpline
Sky Media UK LTD
Telephone: 0871 2000 463
Email: [email protected]
7
185_38 english manual 08.pdf 27. 4. 2009 8:20:15
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories:
1x - User Guide Book 1x - Remote control
DISPLAY
PICTURE
FORMAT
1x - RF cable 2x - AAA batteries
1x - Quick Start Guide 1x - TV
1x - Stand base & 4 screws
8
Please save your packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.
185_38 english manual 09.pdf 21. 4. 2009 9:45:27
ATTACHING/REMOVING THE STAND & WALL MOUNTING
Attaching the stand
Removing the stand for wall mounting
1) Remove the screws shown
2) The stand will now come off
Fig 1
Fig 2 - Push the television onto the stand
Fig 3
Fig 4 - Screw in the 4 screws provided into the
base of the stand, to secure it
IMPORTANT— BEFORE DRILLING
ANY HOLES IN THE WALL ENSURE
YOU ARE NOT DRILLING WHERE
THERE COULD BE ANY ELECTRIC
WIRES, WATER OR GAS PIPES
THIS TV REQUIRES A VESA
100 WALL MOUNT, OR EQUIVALENT
100
1) Remove the four screws indicated below.
2) The wall mount can now be easily attached
to the mounting holes on the rear of the TV.
These holes are indicated in the picture below
Important – If wallmounting this TV, only use the screws already provided in the wallmounting holes.
Using other screws which are longer could cause irrepable damage to internal parts.
9
185_38 english manual 10.pdf 21. 4. 2009 9:47:21
GETTING STARTED - INITIAL SET UP
IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE CHANNEL
INFORMATION CAN BE STORED.
TUNING IN
IMPORTANT — Please ensure the TV has reached room temperature before connecting the power for the first time
1) Connect the mains lead to your electrical outlet
2a) Connect the RF cable supplied to the
'RF IN' on the rear of the TV and connect
the other end of the cable to your TV Aerial outlet
If no channels are found the following screen will appear, please refer to additional information below.
First Time Installation
Unfortunately the TV did not find any channels
Please check your aerial connection and refer to the user manual
Do you wish to re tune your TV
Yes Do it next time
No
RF IN
TYPICAL SET-UP
2) Switch on the television using the rocker switch
located on the underside of the television
3) Install batteries in the remote control and press
the [STANDBY] button to turn on the TV.
Connect between TV and TV
Aerial socket
INFO
The ‘First Time Installation’ menu should now appear. If it does not, please press
[LCD-MENU] then 8-8-8-8 and the menu will appear.
4) Press [OK] on the remote control whilst ‘OK’
is highlighted on screen.
First Time Installation
Signal Booster
Once you have connected a 'Signal booster' you will need to retune the TV in order to receive all of the channels.
Country
Language
UK
English
Please ensure that the aerial is connected to the connector labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is highlighted in yellow and press ‘OK’ on your remote .If after this scan ,not all digital channels are found ,your aerial may require a signal booster .alternatively ,upgrade your aerial to a high gain digital version .
OK Cancel
Tuning will now take place.
If the TV finds some, but not all, of the Digital channels, the TV is functioning correctly but the signal being received is not strong enough.
(The signal strength needs to be above 85% - you can see the signal strength the TV is receiving when you change channels/ programmes) you will need to increase the signal reception in order to recieve all of the channels available. The most economical way to do this is by purchasing and connecting a 'signal booster' in between the TV and the TV aerial socket.
If this does not solve the problem, you will need to upgrade the TV
10
aerial to a digital hi-gain compatible aerial
185_38 english manual 11.pdf 27. 4. 2009 8:20:52
REMOTE CONTROL BUTTONS
PLEASE NOTE - DVD BUTTONS RELATE TO MODEL WITH BUILT-IN DVD PLAYER ONLY
Digital mode
VOL +/-
GUIDE
Press to show the 7 day TV Guide menu in digital/freeview mode.
D.DISPLAY
CH +/-
INFO
VOL
GUIDE
CH
PICTURE
FORMAT
Digital mode: Exit the Digital menu.
DVD mode: Stop the DVD playing.
Analogue mode: press to select NICAM.
DVD mode: press to select DVD audio channels.
Teletext mode: press to enter the teletext mode.
DVD mode: press to play a DVD program in fast
rewind mode.
Digital mode: press to display FAV menu.
Teletext mode: press hold on or off for current page
display.
DVD mode: press to play a DVD program in fast
forward mode
Digital mode: decrease fav channel.
DVD mode: press to go to DVD.
Digital mode: increase fav channel.
DVD mode: select different angle of DVD
Teletext mode: request the index page.
DVD mode: press to replay the current program from
the previous chapter.
Teletext mode: change the display size.
DVD mode: press to advance forward to the next
chapter.
Teletext mode: To reveal or hide the hidden words.
DVD mode: select the zoom to change picture size.
Teletext mode: Sub coded page access.
Digital mode: To switch the dialogue at the bottom off the screen
11
12
185_38 english manual 12.pdf 27. 4. 2009 8:23:06
TV BUTTONS & THEIR FUNCTIONS
TOP PANEL BUTTONS
7
8
5
6
9
1
2
3
4
Displays the input source menu
Displays Menu/OSD
Program/Channel down and menu down
Program/Channel up and menu up
Volume down and menu down
Volume up and menu up
DVD - Play/Pause
DVD - Eject
Standby On/Off only for DVD model
1 2 3 4 5 6 7 8 9
SOURCE MENU CHCH+ VOLVOL+ STANDBY on/off power switch
185_38 english manual 13.pdf 15. 4. 2009 8:58:12
INPUTS & CONNECTIONS
REAR CONNECTIONS
CI Port
G
H
E
F
C
D
A
B
RF IN
COMPONENT/S-VIDEO
AUDIO
VGA(PC) AUDIO
YPbPr
S-VIDEO
SCART
VGA(PC)
HDMI
RF input (TV aerial)
3.5mm - Component/S-Video Audio input
3.5mm - VGA(PC) Audio input
Component input
Video input
SCART input
VGA-PC input
HDMI input
COMPONENT/S-VIDEO VGA(PC)
COMPONENT
RF IN AUDIO AUDIO Pr Pb Y S-VIDEO SCART VGA(PC) HDMI
A B C D E F G H
COMPONENT/S-VIDEO VGA(PC)
COMPONENT
RF IN AUDIO AUDIO Pr Pb Y S-VIDEO SCART VGA(PC) HDMI
Connect between TV and TV Aerial socket
Choosing Mode/Source
To switch between the different connections is very easy.
1) Press [SOURCE] - The following will appear
2) Press [\/] or [/\] to select the input you
require.
3) Press [OK]
Connecting HD Ready Devices
There are two options for HD.
1) By connecting via HDMI cable (not included)
– this provides both HD picture and sound.
2) By connecting via Component (YPbPr) cable
(not included) – this provides HD picture and the
source should be set to COMPONENT. For sound
you should connect a 3.5mm jack to phono cable
to the YPbPr/AV Audio in.
TV/ANALOGUE
FREEVIEW
HDMI
SCART
COMPONENT
S-VIDEO
VGA/PC
DVD
- only for DVD model
13
185_38 english manual 14.pdf 27. 4. 2009 13:24:57
TV MENU OPERATION
To access the OSD menu, press
‘LCD-Menu’ on the remote control.
Use the scroll up/down/right/left to navigate through the menus.
Adjusting Contrast (Only available when
Picture Mode is set to Personal)
Switch the balance between black and white
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Contrast
3) Press [>] to increase the contrast
or [<] to decrease the contrast
PICTURE
FORMAT
PICTURE SETTINGS MENU
Lets you adjust picture mode, contrast, brightness, colour, tint and sharpness to enhance the viewing experience.
PLEASE NOTE – YOU CAN ONLY MAKE
ADJUSTMENTS TO CONTRAST,
BRIGHTNESS & COLOUR WHEN
PICTURE MODE IS SET TO ‘PERSONAL’.
Selecting Picture Mode Preset
Switch between different preset picture options
4) Press [EXIT] to exit
Adjusting Brightness (Only available when Picture Mode is set to Personal)
Increase or decrease the brightness of the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Brightness
3) Press [>] to increase the brightness
or [<] to decrease the brightness
Standard All settings are set to 50
Personal Lets you manually alter all the settings
Movie
Sport
Mild
Game
Set to enhance when watching a movie
Set to enhance when watching a sport
Set to be lighter in colour and less bright
Set to enhance when playing a games console
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Picture Mode
3) Press [>] to navigate through
the various options
4) Press [EXIT] to exit
Adjusting Colour (Only available when
Picture Mode is set to Personal)
Increase the colour from black and white to vivid
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Colour
3) Press [>] to increase the colour
or [<] to decrease the colour
14
4) Press [EXIT] to exit
4) Press [EXIT] to exit
185_38 english manual 15.pdf 17. 4. 2009 8:28:17
TV MENU OPERATION
PICTURE SETTINGS MENU
Adjusting Tint (only available on some sources)
Lets you increase or decrease the level of tint within the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Tint
3) Press [>] to increase the tint
or [<] to decrease the tint
Adjusting Colour Temperature (only available on some sources)
There are 3 presets for colour temperature
Warm Increased red within the picture
Cold Increased blue within the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Colour Temperature
3) Press [>] to navigate through the
various options
4) Press [EXIT] to exit
Adjusting Sharpness
You can change the sharpness between the different preset options
Normal
Sharp
For standard use
For pictures with little movement
Sharpest For pictures with nearly no movement
Soft For pictures with large amount of movement
Softest For pictures with lots of movement
4) Press [EXIT] to exit
Dynamic Noise Reduction
Reduces the interference in the picture.
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight DNR
3) Press [>] to switch between OFF, LOW,
MID & HIGH
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Sharpness
3) Press [>] to navigate through
the various options
4) Press [EXIT] to exit
4) Press [EXIT] to exit
15
tesco english manual 19_14 page Page 1 19. 12. 2008 10:55:50
TV MENU OPERATION
SOUND SETTINGS MENU
Adjusting Volume
Lets you adjust the volume of the television
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Sound Settings
Menu
3) Press [\/] to highlight Volume
4) Press [>] to increase the volume
or [<] to decrease the volume
Adjusting Bass
To adjust the amount of bass within the sound
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Sound Settings Menu
3) Press [\/] to highlight Bass
4) Press [>] to increase the bass or [<]
to decrease the bass
5) Press [EXIT] to exit
Selecting Sound Mode Preset
Switch between different preset sound options
Voice
Music
Emphasises voice over other sounds
Emphasises music over voices
Theatre Provides liver and full sound for movies
Personal Selects your personal sound settings
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Sound Settings
Menu
3) Press [\/] to highlight Sound Mode
4) Press [>] to navigate through
the various options
5) Press [EXIT] to exit
Adjusting Treble
To adjust the amount of treble within the sound
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Sound Settings Menu
3) Press [\/] to highlight Treble
4) Press [>] to increase the treble or [<]
to decrease the treble
5) Press [EXIT] to exit
Adjusting Balance
To switch the sound between the left and right speakers
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Sound Settings Menu
3) Press [\/] to highlight Balance
4) Press [>] to increase the balance or [<]
to decrease the balance
16
5) Press [EXIT] to exit
5) Press [EXIT] to exit
185_38 english manual 17.pdf 27. 4. 2009 8:28:47
TV MENU OPERATION
TUNING SETTINGS MENU
(Only Freeview & Analogue TV modes)
Adjusting Country
If you are moving country you may wish to change the Country Settings
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Country
4) Press [>] to alter the chosen country
5) Press [EXIT] to exit
Auto Tuning
Scan for all channels based on the current settings
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Auto Tuning
6) Press [>] to start
7) Press [EXIT] to exit
Program Edit / Changing Channel Position
(Only Freeview & Analague TV modes)
You can change the analogue channel position to suit your requirements.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Program Edit
4) Press [>] to enter Auto tuning
5) Press [OK] to start the tuning
6) Press [EXIT] to exit
Manual Tuning
You may wish to manual search if you can’t find a certain channel or if you wish to connect to a
Satellite/Cable box via RF/Aerial connector
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Manual Tuning
4) Press [>] to enter manual tuning
5) Press [>] to highlight Start Screen
4) Press [>] to enter the program edit menu
5a) Freeview mode – Press the [Green] button to add the
selected channel to your favorite, press it a second
time to remove. Press the [Yellow] to delete the channel
from the list. WARNING – this will remove the channel
completely from the TV. Press [Blue] to lock a channel
(to do this the System Lock function must be set “ON”)
5b) Analogue TV mode – Press the [>] to select the change
you wish to move. Move to the new location and press
[OK]
FREEVIEW
BBC1
BBC2
ITV1
CH4
CH5
ITV2
BBC3
BBC4
ANALOGUE
BBC1
BBC2
ITV1
CH4
CH5
To swap channel press on remote move to the desired location and press
6) Press [EXIT] to exit
17
18
185_38 english manual 18.pdf 21. 4. 2009 12:00:16
TV MENU OPERATION
Common Interface Slot
(Only in Freeview Mode)
Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be inserted into the COMMON
INTERFACE PORT. To access the card follow the steps below.
CAM and smartcard
TIMER SETTINGS MENU
Lets you adjust the OSD timing and the sleep timer
Sleep Timer
Lets you set the sleep timer so the television automatically switches off after a certain amount of time.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Timer Settings
Menu
3) Press [\/] to highlight Sleep Timer
4) Press [>] to increase the time
to the required amount
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Common Interface
4) Press [>] to enter the menu
5) Press [EXIT] to exit
5) Press [EXIT] to exit
On Screen Display Timer
Lets you adjust the amount of time the On
Screen Menu stays on the screen before disappearing.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Timer Settings Menu
3) Press [\/] to highlight OSD Timer
4) Press [>] to increase the time and [<] to
reduce the time
5) Press [EXIT] to exit
185_38 english manual 19.pdf 17. 4. 2009 8:29:02
TV MENU OPERATION
GENERAL SETTINGS MENU
Lets you adjust the language, picture size, blue screen, add child lock, complete first time installation and reset the television.
On Screen Menu Language
Lets you change the on screen menu language.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to General Settings
Menu
3) Press [\/] to highlight Language
4) Press [>] to change the language
System Lock
This menu allows you to lock certain features of the television so that they can not be used or viewed. For example if you don’t want certain channels viewed by children or if the television is to be used in a hotel and you want to limit the volume.
You can lock any of the following - TV buttons,
TV source, set default start up source and limit the maximum volume.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight System Lock
GENERAL SETTINGS MENU
English
Auto
Off
GENERAL SETTINGS MENU
English
Auto
Off
5) Press [EXIT] to exit
Picture Format
Lets you adjust the picture format
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight Picture Format
4) Press [>] to change the picture
format
GENERAL SETTINGS MENU
English
Auto
Off
5) Press [EXIT] to exit
Blue Screen
Changes the background when there is no input between clear and a blue background
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight Blue Screen
4) Press [>] to switch between on and off
GENERAL SETTINGS MENU
English
Auto
Off
4) Press [>] to enter System Lock menu
System Lock
Key Lock
Source Lock
Default Source
Max Volume
Change PIN Code
SYSTEM LOCK
Off
On
ATV
99
You can now select the following:
Key Lock – Off/On – This stops the buttons on the television working.
Source Lock – Press [>] to enter then apply On to lock the source so it can’t be used
Default Source – You can set the default start up source, so when the television is turned on it goes to this source.
Maximum Volume – You can limit the maximum volume
Change Pin Code – Press [>] to enter, first enter the current code (default is blank so just press OK), then enter your new code.
5) Once you have applied your settings, scroll to System
Lock and select ON. Your television is now locked.
6) Press [EXIT] to exit.
5) Press [EXIT] to exit
19
20
185_38 english manual 20.pdf 21. 4. 2009 9:52:39
TV MENU OPERATION & 7 DAY TV GUIDE
First Time Installation
Allows you to reset the television for first time tuning.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight First Time Installation
4) Press [>] and First time install screen will
appear
GENERAL SETTINGS MENU
Welsh
Auto
Off
5) Press [OK] and tuning will commerce.
First Time Installation
Country
Language
UK
English
Please ensure that the aerial is connected to the connector labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is highlighted in yellow and press ‘OK’ on your remote .If after this scan ,not all digital channels are found ,your aerial may require a signal booster .alternatively ,upgrade your aerial to a high gain digital version .
OK Cancel
Reset television to factory settings
You may wish to reset the menus to factory settings e.g. if you have forgotten a changed password
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to General Settings Menu
3) Press [\/] to highlight Reset
4) Press [OK] to reset the television
GENERAL SETTINGS MENU
Welsh
Auto
Off
7 DAY TV GUIDE
TV Guide is available in Digital TV mode.
It provides information about forthcoming programmes (where supported by the broadcasted channel).
You can view the start and end time of all programs and on all channels for the next
7 days.
It is very simple to operate.
1) Press [GUIDE]. The following now and next menu
will appear.
7 Day TV Guide
Tues 14/10 09:42
Real Rescues
(News/CA) Nick Knowles presents dramatic events from the day-to-day work of the emergency services, The series is out on call with the dedicated crews, answering 999 calls as they protect the public. [S]
09:15-10:00
Channels
1. BBC ONE
2. BBC TWO
3. ITV 1
4. Channel 4
Current Event
Real Rescues
Balamory
The Jeremy Kyle Show
Impressionism: Revenge...
Next Event
Put your Money Where Y...
Little Red Tractor
This Morning
Freshly Squeezed Shorts
Navigate
7 Day EPG Exit Quit OK Watch Info Help
2) Navigate through the now and next menu using
the [>], [<], [V] and [/\] buttons
3) Press the [BLUE] button to enter the 7 day menu.
Reminders can now be added by pressing [OK].
7 Day TV Guide
Essential Electricals
Tues 31/5 14:29
14:00-14:30
(Undefined) Join us for the pick of bid tv’s quality kitchen appliances, vacuum cleaners, irons, home telephones and many other essential electricals.
Thur 31/5
23. bid tv
24. price-drop tv
26. UKTV Style
33. Eurosport UK
34. Setanta SP...
14:00
Essential Electric
14:45
Quality Products
15:30
Handbag Heaven
Quality Products Quality Products a
Extreme Makeover: Home Edition Extreme Makeove
Closedown
Top 14: SPL Sna NRL on Fox
Navigate
Exit Quit Advance Day OK Reminder
4) Press [EXIT] to exit the 7 day TV Guide.
5) Press [EXIT] to exit
Please note – If you have applied the system lock to reset the television you must press
[LCD-MENU] then 8-8-8-8, to start the first time installation sequence.
185_38 english manual 21.pdf 27. 4. 2009 8:29:28
DIGITAL TELETEXT & ANALOGUE TELETEXT
Digital TV Teletext
With Digital TV (Freeview) there is also digital teletext available on some channels.
Simply follow the on screen commands. Here is an example of the BBC digital teletext service.
1) To start digital teletext press the RED button
(BBC channels) or the TEXT buttons (Other
channels)
B B C i
Tuesday 18 Dec
100
Press SELECT for
Live Crecket
Eng v SL
Radio Concert
News Multiscreen 1001
Sport 300
Weather 400
BBCi INDEX 199
Did Bee Movie Leave you buzzing? BBC Movies - 540
To exit, press TEXT
2) To select the information you require you
can scroll using [\/] or [/\] and press [OK]
alternatively you can key the page number
for example [3][0][0] followed by [OK]
B B C SPORT
BBC ONE
To exit, press TEXT
For full screen TV, press 0
B B C i HOME
11:15 18 Dec
Sport
Sport in Video
Main Headlines
Football
Cricket
Rugby Union
Rugby League
Tennis
Golf more...
SHORTCUTS BACK
300
INDEX
You can then navigate using the colours buttons (Red, Green, Yellow, Blue), the [/\] [\/] buttons and numbers.
If you wish to exit at anytime press [EXIT]
Teletext is a service offered by some broadcasters.
Teletext Operation
1) Press [TEXT], after a few seconds
teletext page 100 should appear.
Here is an example of BBC1
2) You can now navigate to the page
you require in a number of ways:
a) Press the page you require using
the number buttons i.e. page 302,
by pressing [3][0][2]
b) Press the colour buttons, these will
take you to the page indicated
on screen for each colour
3) To exit Teletext press [TEXT] twice
at any time
Other buttons
[SIZE] this increases or decreases the size of the text on screen
[INDEX] some pages are more than one page long this button displays the number of pages
[REVEAL] if there is an answer or something hidden this will display it
[SUBPAGE] displays the sub page if it exists
[HOLD] This stops the pages changing when there are multiple pages
21
tesco english manual 19_14 page Page 1 19. 12. 2008 10:59:38
CONNECTING TO A PC - WINDOWS XP
IMPORTANT— Before connecting to a PC you must ensure that the settings of the PCs output are correct for the new
LCD Monitor.
You need to do the following with your old monitor connected
4) Left click your mouse on Settings, this screen will
appear. Check the screen resolution is set to what
is show in the technical specifications section. You
can adjust the resolution by moving the slider on
screen.
1) Switch on your PC
2) When finished booting up, right click
your mouse anywhere on the screen,
the below will appear
5) Left click your mouse on Advance, this screen will
appear, click on tab called ‘Monitor’
3) left click your mouse on Properties, this screen will appear
22
6) Left click on the drop down for Screen refresh rate
and select 60 Hertz.
7) Finally click on Apply, then click Yes and the settings
will be saved.
8) Turn off your PC.
9) Connect up your LCD TV to your PC and switch on.
10) Switch on your PC, Windows will automatically
Install the LCD TV.
For audio connection please refer to the Inputs and
Connections page.
For Windows Vista operating system the process is very similar to the above.
If you require additional support please contact the helpline.
tesco english manual 19_14 page Page 1 19. 12. 2008 11:00:02
PC MENU OPERATION (VGA)
VGA MENU
Auto Configuration of Screen
Lets you automatically configure the television to be used as a computer monitor
1) Press [LCD-MENU] to enter menu
2) Press [>] to select PC settings
3) Press [\/] to select Auto Sync
4) Then press [>] for the TV to
automatically configure itself
Horizontal Position
Changes the horizontal position of the picture
1) Press [LCD-MENU] to enter menu
2) Press [>] to select PC settings
3) Press [\/] to select H-Position
4) Then press [>] or [<] to move the
picture to left or right
5) Press [EXIT] to exit
Phase
To adjust delay time of phase in order to reduce the noise of picture
1) Press [LCD-MENU] to enter menu
2) Press [>] to select PC settings
3) Press [\/] to select Phase
4) Then press [>] or [<] to increase or
decrease the phase
5) Press [EXIT] to exit
Vertical Position
Changes the vertical position of the picture
1) Press [LCD-MENU] to enter menu
2) Press [>] to select PC settings
3) Press [\/] to select V-Position
4) Then press [>] or [<] to move the
picture up or down
5) Press [EXIT] to exit
Clock
Alter this in order to reduce the noise within the picture
1) Press [LCD-MENU] to enter menu
2) Press [>] to select PC settings
3) Press [\/] to select Clock
4) Then press [>] or [<] to increase or
decrease the clock
5) Press [EXIT] to exit
Position Reset
To position of the picture to the factory settings
1) Press [LCD-MENU] to enter menu
2) Press [>] to select PC settings
3) Press [\/] to select Position Reset
4) Then press [>] or [<] to move the
picture up or down
5) Press [EXIT] to exit
5) Press [EXIT] to exit
23
24
185_38 english manual 24.pdf 27. 4. 2009 13:25:35
DVD MENU OPERATION (DVD MODEL ONLY)
HOW TO PLAY DVD’S
The DVD player has an automatic DVD feature which means when you insert a disc it will automatically switch source and start to play.
If you disc does not play please refer to frequently asked questions section of the user guide.
SYSTEM SET UP
Adjusting TV System
Lets you adjust between NTSC, PAL,
AUTO (PAL is default for the UK)
1) Press [DVD-SETUP] to enter menu
2) Press [>] to select TV System
3) Press [>] to enter menu
4) Press [\/] or [/\] to highlight NTSC, PAL
or AUTO
5) Press [OK] to confirm
Adjusting Picture Format
This lets you select the format of the picture that is being shown between 16:9, 4:3
LetterBox and 4:3.
1) Press [DVD-SETUP] to enter menu
2) Press [>] to select TV System
3) Press [\/] to select TV Type
4) Press [>] to enter menu
5) Press [\/] or [/\] to highlight 4:3PS,
4:3LB or 16:9
6) Press [OK] to confirm
6) Press [DVD-SETUP] to exit
7) Press [DVD-SETUP] to exit
Returning to Default
This lets you switch the DVD menus show above back to Default settings
1) Press [DVD-SETUP] to enter menu
2) Press [>] to select TV System
3) Press [\/] to select Default
4) Press [>] to enter menu
5) Press [>] to highlight Yes
6) Press [OK] to confirm
7) Press [DVD-SETUP] to exit
185_38 english manual 25.pdf 27. 4. 2009 8:33:20
DVD MENU OPERATION (DVD MODEL ONLY)
AUDIO SET UP
Adjusting Tone
Lets you increase or decrease the Tone of the sound
1) Press [DVD-SETUP] to enter menu
2) Press [\/] to select Audio Set Up
3) Press [>] to enter menu
4) Press [\/] to select Tone
5) Press [>] to enter menu
6) Press [\/] or [/\] to increase or decrease
the tone
7) Press [OK] to confirm
Adjusting the Sound
Lets you change the sound between Stereo,
Mono Left, Mono Right and Mixed Mono.
1) Press [DVD-SETUP] to enter menu
2) Press [\/] twice to select Digital Set Up
3) Press [>] to enter menu
4) Press [\/] to select Dual Mono
5) Press [>] to enter menu
6) Press [\/] or [/\] to switch between Stereo,
Mono L, Mono R and Mix Mono
7) Press [OK] to confirm
8) Press [DVD-SETUP] to exit
8) Press [DVD-SETUP] to exit
DIGITAL SET UP
Adjusting Dynamic Range
This is the difference between the quietest and loudest sounds. This setting works only with
DVD discs recorded in Dolby digital.
FULL: Set this to listen with the range recorded
on the disc.
4/8: Set this to listen with a range equivalent
to a normal television.
2/8: Set this to listen with a smaller difference
between the maximum and minimum volume.
1) Press [DVD-SETUP] to enter menu
2) Press [\/] twice to select Digital Set Up
3) Press [>] to select Dynamic Range
4) Press [>] to enter menu
5) Press [\/] or [/\] to increase or decrease
the Dynamic range
Changing Regions
This TV/DVD player is pre-set to play Region 2 DVDs.
In the event you wish to use the TV/DVD in another country that uses different region discs, please visit www.skymediauk.co.uk. Select ‘product support’,
‘Changing Region’
7) Press [DVD-SETUP] to exit
25
185_38 english manual 26.pdf 27. 4. 2009 13:25:58
USING WITH SKY DIGITAL
You may wish to use your TV with Sky
Digital.
There are a number of connection options, the best being connecting via SCART cable.
Connecting via SCART
1) Connect the SCART cable from the Sky
Digital Box to SCART of the TV
2) Press [SOURCE]
3) Press [\/] or [/\] to select SCART
4) Press [OK]
The channel your Sky Digital box is displaying will now be shown on the TV.
You may wish to share your Sky Digital signal around the home by using an RF connection. If this TV is to be connected in this way, please follow the below.
Connecting via RF
Ensure the Sky signal is switched on, before you start the below.
1) Connect the RF cable from the RF
output socket of the sky/cable box to
the ‘RF IN’ of the TV.
2) Switch the TV to analogue TV mode
3) Press [LCD-MENU] to enter menu
4) Press [>] twice to select Tuning
Settings Menu
5) Press [\/] to select Manual Tuning
USING WITH SKY DIGITAL REMOTE CONTROLS
(BSKYB) OR UNIVERSAL REMOTE CONTROL
You may wish to use your Sky Digital or a universal remote control to operate some of the functions of this
TV. For this you require a ‘code’ that needs to be programmed into your Sky Digital or universal remote control.
For codes for universal remote controls, please visit our website where you will find the very latest information and codes.
For codes for Sky/Sky+Sky HD, please note that at the point of manufacture, BSkyB have not launched the code required for this model of TV. They are due to launch a new remote control which should include the necessary code to operate the functions of the TV during late 2009 (called revision 9). The launch date was not known at the time of printing this manual.
Please check our website for updates, alternatively, see below some alternative options of remote controls that are available.
6) Press [>] to enter Auto tuning
7) Press [OK] to start tuning
26
Once tuning is complete the first channel will appear. Press [CH+] to move through the channel until you find the Sky channel.
The channel can then be moved if you wish, please refer to the Tuning Setting menu – Program Edit section of the manual.
One for All Sky Originals
The One for All remote controls shown above will operate all of the functions of the Sky box in the same way the original remote control will, in addition, they will also operate the functions of this model of TV. The One for All versions are available to purchase from the helpline/website. The original Sky remote controls are shown for comparison purposes
If you require any further information, you can contact us: www.skymediauk.co.uk
email - [email protected]
Tel - 0871 2000 463
185_38 english manual 27.pdf 27. 4. 2009 8:35:57
CONNECTING A GAMES CONSOLE
Connecting a games console can sometimes seem very difficult. We have simplified it to three options depending on the cables that you have.
Option 1 – Connecting via Scart to AV adapter
If you are supplied with a cable from the console which has YELLOW,
RED & WHITE connectors you must connect via a SCART to AV adapter
(Some console include this)
TV source should be set to SCART.
Option 3 – Connecting via Component cable
If you are supplied with a cable from the console which has RED, GREEN, BLUE,
RED & WHITE connectors you must connect via Component (for picture) and by 3.5mm to phono cable (for sound).
TV Source should be set to Component.
Option 2 – Connecting via HDMI cable
If you are supplied with a HDMI cable is the easiest option. A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss of picture quality.
TV Source should be set to HDMI.
27
185_38 english manual 28.pdf 27. 4. 2009 8:37:45
28
FREQUENTLY ASKED QUESTIONS
Question:
I have tuned in Digital TV but
I am not receiving any or all of the channels and/or the channels I receive are breaking up
The sound quality is high pitched?
I have inserted a disc but it is not playing
The subtitles are switched on when I am watching a DVD
I have connected the TV to my VCR via
SCART but it is not recording
Solution:
1) Check you are in an area that can
receive Freeview. Visit
www.freeview.co.uk or call
08701 111 270.
2) Check you have a suitable aerial.
Many indoor aerials will say they are
digital ready, but you will not get
a good signal
3) Consider purchasing a signal booster,
it is much cheaper than a digital aerial
and cures 70% of poor signal problems.
4) Failing the above for now use the
analogue TV, until the signal becomes
stronger in your area.
For best performance we recommend using an outdoor hi-gain digital aerial. If you are receiving some digital stations first try to connect a signal booster in between the TV and TV aerial socket
Go into the sound settings menu as shown earlier in the manual and increase the level of the bass and decrease the treble
1) Ensure you have inserted put the disc
in facing the correct way forward
2) Ensure the disc is clean and is not
scratched
3) Some copied discs will not play.
4) Check the DVD is a region 2 disc – to change
the region of the DVD player, refer to ‘Changing
Regions’ in the DVD section of this user guide
Each time you press [Subtitles] button you switch between the different languages.
Off is one of the options. If you still have subtitles on, access through the DVD disc menu and switch off
In addition to connecting via SCART, you should connect the aerial cable from the wall socket to VCR and another aerial cable from the VCR to the TV
If you are still experiencing problems please contact the Helpline
Customer Support/Technical Helpline
Sky Media UK LTD
Telephone: 0871 2000 463
Email: [email protected]
Visit our web site www.skymediauk.co.uk for further Trouble shooting and frequently asked questions.
185_38 english manual 29.pdf 27. 4. 2009 8:39:44
TECHNICAL SPECIFICATION
Panel
Size (Inches)
Resolution
Contrast Ratio
Brightness cd/m
2
PC RGB
RF
Video
Input Signal
Sound
HDMI
Speaker Output Watts (RMS)
DVD player
Power
Dimensions
Weight
Voltage
Inc Stand
Net (Kgs)
Gross (Kgs)
X185/38B-GB-TCD-UK X185/38B-GB-TC-UK
18.5" 18.5"
1366 x 768
1000:1
1366 x 768
1000:1
250
Yes
250
Yes
75 ohm Antenna / PAL-SECAM
1 x SCART, 1 x S-Video, 1 x Component
1 x 3.5mm jack for PC, 1 x 3.5mm jack for
YPbPr/S-Video
1
2 x 3
Yes
2 x 3
No
100-240v 47-63Hz 1.5A (Standby <2W)
455W x 355H x 170D 455W x 355H x 170D
4.8
5.9
4.1
5.1
29
30
185_38 english manual 30.pdf 27. 4. 2009 13:28:55
INDEX
Analogue TV teletext
Auto Configuration of Screen
Auto Tuning
Attaching/Removing
21
23
17 the stand 9
16
16
Blue Screen 19
Brightness 14
Changing DVD Regions
System Lock
25
19
Colour Temperature
Common Inferface Slot
Connecting to a PC
Connecting to a Games Console
15
18
22
27
Digital Switchover Re-Tune
Digital TV teletext
Dynamic Noise Reduction
Dynamic Range
7 Day TV Guide
First Time Installation
20
20
Frequently Asked Questions 28
Horizontal Position 23
10
21
15
25
Inputs and Connections
Manual Tuning
Mode/Source
13
17
13
On Screen Display Timer
On Screen Menu Language
18
19
23
Picture
Picture Format - DVD Mode
Picture Mode Preset
24
14
Program Edit / Changing Channel
Remote control buttons and their
11
Removing the stand
Reset television to factory settings
26
20
Returning to Default 24
Sharpness 15
Sound Mode Preset
Technical Specifications
16
29
10
12
Tuning in TV
TV buttons and their functions
Using with Sky Digital / Universal
Remote
What is included in the box
Wall mounting the TV
8
9
OPTIONAL ACCESSORIES AND SPARE PARTS
If you wish to purchase additional accessories for example wall mounts, Sky remote controls or replacement spare parts, please visit our website www.skymediauk.co.uk or contact the helpline for further details.
blank.pdf 12. 2. 2009 15:42:54
blank.pdf 12. 2. 2009 15:42:54
blank.pdf 12. 2. 2009 15:42:54
last.pdf 8. 4. 2009 13:27:54
X18/MAN/0001
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project