Samsung PDP-TELEVISION Operating instructions

Owner’s Instructions
HPN5039/HPN6339
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
TEL : 1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
BN68-00476A-00
Warning! Important Safety Instructions
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung product represents the latest in television
technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities,
making it one of the best products in its class. We are proud to offer you a product that will provide
convenient, dependable service and enjoyment for years to come.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact
with any inside part of this product.
Important Safety Information
Always be careful when using your PDP. To reduce the risk of fire, electrical shock, and other injuries,
keep these safety precautions in mind when installing, using, and
maintaining your machine.
• Read all safety and operating instructions before operating your PDP.
• Keep the safety and operating instructions for future reference.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
• Heed all warnings on the PDP and in the operating instructions.
• Follow all operating and use instructions.
Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as practical.
• Unplug the PDP from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol
cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such additions
can increase the risk of fire, electric shock, or other personal injury.
Caution: FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may
void the user's authority to operate it.
• Do not use the PDP where contact with or immersion in water is a possibility, such as near bath tubs,
sinks, washing machines, swimming pools, etc.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
• Do not place the PDP on an unstable cart, stand, tripod, bracket,
table, or floor where it can fall. A falling PDP can cause serious injury
to a child or adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the PDP. Follow the manufacturer's instructions
when mounting the unit, and use a mounting accessory recommended
by the manufacturer. Move the PDP and cart with care. Quick stops,
excessive force, and uneven surfaces can make the unit and cart
unsteady and likely to overturn.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an
infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part
may be in violation of these rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
• Provide ventilation for the PDP. The unit is designed with slots in the cabinet for ventilation to protect it
from overheating. Do not block these openings with any object, and do not place the PDP on a bed,
sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the
PDP on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the
manufacturer's instructions for mounting.
• Operate your PDP only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this PDP is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet
only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If
the plug still does not fit, contact your electrician to replace your outlet.
2
3
FCC Information
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched
by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
• Unplug the PDP from the wall outlet and disconnect the antenna or cable system during a lightning storm
or when left unattended and unused for long periods of time. This will prevent damage to the unit due to
lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead
power lines or other electric light or power circuits or where it can fall into such power lines or circuits.
When installing an outside antenna system, be extremely careful to keep from touching the power lines
or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points
or damage parts. Never spill liquid of any kind on the PDP.
• Ground outdoor antennas. If an outside antenna or cable system is connected to the PDP, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
• Do not attempt to service the PDP yourself. Refer all servicing to qualified service personnel. Unplug the
unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the PDP has been exposed to rain or water
- if the PDP does not operate normally by following the operating instructions
- if the PDP has been dropped or the cabinet has been damaged
- when the PDP exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified
technician to restore the PDP to normal.
• When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this PDP, ask the service technician to perform safety checks
to determine that the PDP is in a safe operating condition.
• The PDP can properly operate in a temperature range of 32~104°F(0~40°C) and 80% humidity.
Do not use in a hot and humid place.
• Before moving the PDP equipped with speakers, separate the speakers from the PDP. If you move the PDP
with the speakers attached, it may result in damage or injury.
4
User Instructions
Warning
The Federal Communications Commission Radio
Frequency Interference Statement includes the following warning:
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation .
User must use shielded signal interface cables to
maintain FCC compliance for the product.
Provided with this monitor is a detachable power
supply cord with IEC320 style terminations.
It may be suitable for connection to any UL Listed
personal computer with similar configuration.
Before making the connection, make sure the voltage rating of the computer convenience outlet is
the same as the monitor and that the ampere rating of the computer convenience outlet is equal to
or exceeds the monitor voltage rating.
For 120 Volt applications, use only UL Listed
detachable power cord with NEMA configuration
5-15P type (parallel blades) plug cap. For 240
Volt applications use only UL Listed Detachable
power supply cord with NEMA configuration
6015P type (tandem blades) plug cap.
If this equipment does cause harmful interference
to radio or television receptions, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
User Information
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user’s authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/television technician for additional
suggestions. You may find the booklet called How
to Identify and Resolve Radio/TV Interference
Problems helpful. This booklet was prepared by
the Federal Communications Commission. It is
available from the U.S. Government Printing
Office, Washington, DC 20402, Stock Number
004-000-00345-4 .
IC Compliance Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations of ICES-003.
Cet appareil Numérique de classe B respecte
toutes les exigences du Règlemont NMB-03 sur les
équipements produisant des interférences au
Canada.
Notice de Conformité IC
Cet appareil numérique de classe B respecte
toutes les exigences du Règlement ICES-003 sur
les équipements produisant des interférences au
Canada.
VCCI
This is a Class B product based on the standard
of the Voluntary Control Council for Interference
by Information Technology Equipment (VCCI). If
this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use the equipment according to
the instruction manual.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
3351 Michelson Drive,
Suite #290, Irvine, CA92612 USA
5
Important Warranty Information
Regarding Television Format Viewing
Table of Contents
Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video.The images displayed on them should primarily be
in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the
total television viewing per week.
General Information
Channel Control
Your New Plasma Display Panel ....................10
Fine Tuning Channels ..................................62
Remote Control Buttons ................................12
LNA (Low Noise Amplifier) ..........................63
Additionally,viewing other stationary images and text such as stock market reports, video game
displays,station logos,web sites or computer graphics and patterns,should be limited as described above
for all televisions. Displaying stationary images that exceed the above guidelines can
cause uneven aging of PDP Displays that leave subtle,but permanent burned-in
ghost images in the PDP picture.To avoid this,vary the programming and images,
and primarily display full screen moving images,not stationary patterns or dark bars.
On PDP models that offer picture sizing features,use these controls to view different formats as a full screen
picture.
Connections
Connecting to a PC ....................................66
Connecting VHF and UHF Antennas ..............20
Adjusting the PC Screen ..............................70
Connecting Cable TV ..................................20
Changing the Position of the Image................71
Connecting Speakers ..................................22
Changing the Size of the Image ..................72
Connecting a VCR ......................................24
Information ................................................73
Connecting a Camcorder ............................25
Picture Quality Adjustment ..........................74
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a
result of format selection and use,as well as burned-in images, are not covered by your Samsung limited
warranty.
Wall Installation Instructions ..........................14
Connecting a PC and Operation
Connecting a DVD Player ............................26
Connecting a DTV Receiver ..........................27
Time Setting
Setting the Clock ........................................78
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma
display panel for more than several minutes as it can cause screen image retention. This image retention is
also known as “screen burn”. To avoid such image retention, refer to page 40 of this manual to reduce the
degree of brightness and contrast of this screen when displaying a still image.
Operation
Setting the Sleep Timer ................................79
Turning the PDP On and Off ........................30
Setting the Timers ........................................80
Memorizing the Channels ............................32
Setting the Preferred Channel and Volume Level ....82
Setting Up Your Remote Control ....................37
Function Description
Picture Control
Selecting a Menu Language ........................84
Customizing the Picture ..............................40
Viewing Closed Captions ............................85
Using Automatic Picture Settings ..................41
Digital Noise Reduction ..............................86
Selecting the Color Tone ..............................42
Setting Auto Power Off ................................87
DNIe (Digital Natural Image engine) ............43
Using the V-Chip..........................................88
Viewing the Picture-in-Picture ........................44
Selecting the Film Mode ..............................94
Cell Defect
Changing the Screen Size ..........................50
The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9
percent active cells, there may be some cells that do not produce light or remain lit.
Freezing the Picture ...................................51
Altitude
The PDP will not operate normally at altitudes above 6500 ft.
Appendix
Troubleshooting ..........................................96
Sound Control
Care and Maintenance ................................97
Customizing the Sound ................................54
Specifications..............................................98
Using Automatic Sound Settings ...................55
Choosing a Multi-Channel Sound (MTS)Soundtrack ......56
Using the Auto Volume ................................57
Using Dolby Virtual......................................58
Using a Subwoofer ......................................59
6
7
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
General Information
Your New Plasma Display Panel ....................................................10
Remote Control Buttons ................................................................12
Wall Installation Instructions ..........................................................14
Your New Plasma Display Panel
Front Panel
Rear Panel
HPN5039
Ø Component Video/Audio Input jacks
(Y/Pb/Pr/Audio L/Audio R)
ΠService jack
For service only.
´ DVI Input jacks
Receives the digital video/audio signals
from a set top box or PC.
∏ External Speaker Out jacks
Connect external speakers.
ˇ PC(RGB) Input jacks(15pin)
HPN6339
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Connect to the video/audio output jacks
on your PC.
¨S-Video Input jacks
” Antenna jack
Connect to antenna.
’ Sub-woofer speaker output jack
Connect S-Video/audio signals from external
sources such VCRs or DVD players.
ˆ Video Input jacks
Connect video/audio signals from external
sources such VCRs or DVD players.
Connect to the Sub-woofer speaker jack.
˝ Power Input jack
Connect the supplied power cord.
Checking Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown here.
If any piece is missing or broken, call your dealer.
ΠSOURCE button
Press to display all of the available video
sources (ie., Video, S-Video, Component1,
Component2, PC ).
´ MENU button
Displays the main on-screen menu.
ˇ VOL(+,-) button
Press to increase or decrease the volume. Also
used to select or adjust items on the on-screen
menu.
¨CH(▼,▲) button
Press CH▲ or CH▼ to change Channels.
Also used to move up or down in the On-screen
menu.
10
ˆ POWER button
Press to turn the PDP on and off.
Ø Power Indicator
Power Off : LED Red
Power On (Timer On) : LED Green
Power On (Timer Off) : LED Off
∏ Remote Control Signal Receiver
Remote Control/AAA Batteries
Antenna Cable
Speaker Cables
Aim the remote control towards
this spot on the PDP.
” Speakers (optional)
Power Cord
Ferrite Cores; 3EA
(HPN5039)
Owner’s Instructions
11
Remote Control Buttons
¸ SURROUND button
Press the hear the Dolby surround effect.
Remote Control
ΠPOWER button
Turns the PDP on and off.
˛ MTS button
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
◊ AUTO PROG. button
The TV automatically cycles through all of the available channels and stores them in memory.
´ ASPECT button
± ADD/DEL button
ˇ Number buttons
¨ +100 button
≠ DNIe button
ˆ MUTE button
— SET button
Press to change the screen size.
Press to select channels over 100. For example, to select
channel 121, press “+100”, then press “2” and “1.”
Press to mute the PDP sound.
Ø VOL (Volume) buttons
Use it to adjust volume.
∏ SLEEP button
Press to select a preset time interval for automatic shutoff.
” MENU button
Displays the main on-screen menu.
’ ENTER button
Confirms a selection.
˝ PIP button
Activates picture in picture.
Ô STILL button
Press to pause the current screen.
 LED Display
When you press a button, ‘ ‘ appears along with
selected mode (TV, CATV, DVD or STB) and remaining
batteries on LED.
Ò P.MODE button
Adjust the PDP picture by selecting one of the preset
factory settings (or select your personal, customized
picture settings.)
Press to add or delete channels in the TV’s memory.
Activates DNIe (Digital Natural Image engine).
– CAPTION button
Controls the caption decoder.
Used during set up of this Samsung remote control,
so that it will work compatibly with other devices
(VCR, cable box, DVD)
÷ PIP control buttons
SWAP : Exchanges the video signal that is currently
displayed on the main screen with the
signal in the PIP window.
SIZE
: Press to make the PIP window Large, Small
or Double.
CH▲,▼ : Displays the available channels in
sequence. (These buttons change channels
in the PIP window only).
® VCR, DVD control buttons
Controls VCR tape or DVD disc functions: Stop,
Rewind, Play/Pause, Fast Forward.
∑ RESET button
If your remote control is not functioning properly, take
out the batteries and press the reset button for about
2~3 seconds. Re-insert the batteries and try using the
remote control again.
Ú MODE button
Selects a target device to be controlled by the Samsung
remote control (ie., VCR, Cable, DVD players or STB).
If you change modes, the new mode is momentarily
displayed on LED.
Æ PRE-CH button
Tunes to the previous channel.
ı TV/VIDEO button
Press to display all of the available video sources
(ie., Video, S-Video, Component1, Component2, PC, DVI).
Installing the Batteries in Your Remote Control
cover
1 toSlideopenthethebackbattery
compartment of the
remote control.
Install two AAA size batterthe cover back into
2 ies.
3Slide
Make sure to match the
place.
“+” and “-” ends of the batteries with the diagram
inside the compartment.
˜ CH (Channel) buttons
Use it to switch channels.
¯ INFO button
Press to display information on the PDP screen.
˘ EXIT button
Press to exit the menu.
¿ Up/Down Left/Right buttons
12
Control the cursor in the menu.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the PDP’s remote control receiver.
13
Wall Installation Instructions
Installation Notes
1
2
Do not install the PDP in any location other than a vertical wall.
1
Do
Do
Do
Do
not
not
not
not
install
install
install
install
Remove the screws on the rear of the PDP panel.
HPN5039
To protect the performance of the PDP and prevent problems, avoid the following
places.
•
•
•
•
3
Fixing the PDP panel to the wall attachment panel bracket
HPN6339
next to smoke and fire detectors.
in an area subjected to vibration.
in an area subjected to high voltage.
near or around any heating apparatus.
Use only recommended parts and components.
Removing four screws
Parts (Wall attachment panel is sold separately. Check with your dealer)
Removing six screws
2
Connect Insulation holders to screws. (see the illustration below)
3
Tighten the screws connected to the Insulation holders on the rear of the PDP panel.
Wall attachment panel
HPN5039
HPN6339
HPN5039
HPN6339
Connecting four screws
Insulation holders
(HPN5039; 4 EA
HPN6339; 6 EA)
14
Connecting six screws
Screws
(HPN5039; 4 EA
HPN6339; 6 EA)
15
4
Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on
the PDP (Œ) to secure it to the wall mount bracket. (´) Tighten the screws as shown
(ˇ) so that the PDP cannot be separated from wall mount bracket.
How to Adjust Mounting Angle
Notice : Please secure the mounting bracket on the wall surface after setting its angle at 0°
Factory default
HPN5039
HPN5039
HPN6339
PDP panel
Wall
Wall attachment
panel bracket
The wall mount bracket is delivered separately.Please tighten the captive screw in the direction of
the arrow after assembling the bracket.
HPN6339
PDP panel
Changeing the angle
Secure the PDP to the wall mount
Wall
refer to the following
1 bracket.(Please
instructions.)
Set the angle by pulling the upper end of
Wall attachment
panel bracket
PDP attached to bracket in the direction
2 the
of the arrow.
The angle can be adjusted from 0° to 20°
3 by ±2°.
1. Contact an authorized technician when installing the wall attachment panel.
2. After hanging the PDP panel on the wall attachment panel, make sure that
the Insulation holders are completely hung.
3. Be careful so that fingers are not caught.
4. Make sure the wall attachment panel brackets are tightened.
Otherwise, the PDP panel may fall down and you might be hurt.
16
17
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Connections
Connecting
Connecting
Connecting
Connecting
Connecting
Connecting
Connecting
VHF and UHF Antennas ..............................................20
Cable TV....................................................................20
Speakers.................................................................. ..22
a VCR........................................................................24
a Camcorder ..............................................................25
a DVD Player..............................................................26
a DTV Receiver ..........................................................27
Connecting VHF and UHF Antennas
Antennas with 75-ohm Round Leads
If your antenna looks like this:
1
Cable with a Cable Box that Descrambles Some (But Not All) Channels
it has 75-ohm round leads.
Plug the antenna lead into the VHF/UHF terminal
on the PDP.
Use the Antenna Cable, an accessory included
in the product package.
Connecting Cable TV
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
1
Find and disconnect the cable that is connected to the ANTENNA IN terminal of
your cable box.
This terminal might be labeled "ANT IN",
"VHF IN", or simply, "IN". Connect this
cable to a two-way splitter.
2
Connect a coaxial cable between an OUTPUT terminal of the splitter and the IN terminal of the cable box.
3
Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
4
Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
5
Connect the last coaxial cable between the
OUT terminal of the RF (A/B) switch and
the VHF/UHF terminal on the PDP.
You can connect different cable systems to your PDP, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
1
Plug the incoming cable into the VHF/UHF terminal on
the PDP.
Use the Antenna Cable, an accessory included
in the product package.
Cable with a Cable Box that Descrambles All Channels.
20
1
Find the cable connected to the ANTENNA OUT
terminal on your cable box. This terminal might be
labeled "ANT OUT", "VHF OUT", or simply "OUT".
2
Connect the cable to the VHF/UHF terminal on the
PDP.
Use the Antenna Cable, an accessory included
in the product package.
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.)
21
Connecting Speakers
External speakers are sold seperately. Check with your dealer.
HPN5039
Connecting PDP and Speakers
Speaker Audio Cable
Speaker
✱ External speakers MUST have a power handling
capability of 10 watts minimum (impedance 8 ohm).
HPN5039
Powered Subwoofer
(Option)
1
2
3
4
Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
After removing the four screws on the rear of PDP.
As shown in figure, insert the loop on a speaker into the groove on the PDP.
Clamp the speaker and the PDP together and fasten the screws.
Guide
pole
Guide
pole
Please use the speaker-built in amplified audio.
HPN6339
Speaker
Speaker Audio Cable
HPN6339
1
2
Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
After removing the three screws on the PDP, clamp the speaker and the PDP together and
fasten the screws.
Guide
pole
✱ External speakers MUST have a power handling
capability of 10 watts minimum (impedance 8 ohm).
Powered Subwoofer
(Option)
Guide
pole
Please use the speaker-built in amplified audio.
How to Connect
Connect the speaker audio cable to the external speaker output jack on the PDP matching the
“+” and “-” ends of the cable with the diagram on the PDP.
22
23
Connecting a VCR
Connecting a Camcorder
Connecting a VCR to the Video or S-Video/Audio jack
PDP
Viewing camcorder tapes
VCR
Camcorder
PDP
Power Plug
Ferrite Cores(HPN5039)
Audio Cable
Power Plug
S-Video Cable
Video Cable
Video Cable
Ferrite Cores(HPN5039)
Audio Cable
How to Connect
Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.)
Videotape Playback:
1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select “Video” or “S-Video”, then press the ENTER button.
3. Turn on your VCR, insert a videotape and press the play button.
How to Connect
Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the
VIDEO/AUDIO OUTPUT jacks on the camcorder.
Viewing Tapes
1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select the “Video”, then press the ENTER button.
Ferrite Cores (HPN5039)
The ferrite cores are used to attenuate undesired signals. When connecting the audio cable
(PC, DVI, S-Video, Video), attach one of these ferrite cores to the cable near the connector.
3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder
owner's instructions.)
4. Set the IN/OUT switch on your camcorder to OUT.
5. Insert the tape into the camcorder and press the Play button.
When you connect the audio cable (PC, DVI, S-Video, Video,
Component1, Component2) to the connectors, bind the ferrite core
around the cable to secure it.
24
25
Connecting a DVD Player (480i, 480p)
Connecting a DTV Receiver
This PDP displays the optimum picture in 720p mode.
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
Playing DVD
Watching DTV
PDP
DVD Player
PDP
DTV Receiver
Power
Plug
Power Plug
Video Cable
or
Video Cable
Audio Cable
Audio Cable
Ferrite Cores(HPN5039)
DVI Cable
Use the DVI-D connection cable. (sold separately)
How to Connect
How to Connect
1
Connect a Video Cable between the Y, Pb, Pr (COMPONENT1, 2) input jacks on the PDP
and Y/PB/PR output jacks on the DVD players.
Connect the cable or antenna to the antenna input jack on the DTV.
2
Connect a Audio Cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP
and the AUDIO OUT jacks on the DVD player.
1
2
3
Connect an Audio cable between the COMPONENT 1, 2 (L/R AUDIO) or DVI jacks on the
PDP and the AUDIO OUTPUT jacks on the DTV.
To Play DVD:
Connect a Video cable between the Y, Pb, Pr (COMPONENT 1, 2) or DVI jack on the PDP
and the Y, PB, PR (VIDEO OUTPUT JACKS) on the DTV receiver.
1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select “COMPONENT1” or “COMPONENT2”,
then press the ENTER button.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
• For an explanation of Component video, see your DVD owner’s instructions.
To Watch DTV:
1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select “COMPONENT1”, “COMPONENT2” or
“DVI”, then press the ENTER button.
3. Turn on your DTV receiver.
• For an explanation of Component video, see your DTV receiver owner’s instructions.
26
27
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Operation
Turning the PDP On and Off ..........................................................30
Memorizing the Channels..............................................................32
Setting Up Your Remote Control ....................................................37
Turning the PDP On and Off
Turning the PDP On and Off
Displaying Status Information
Press the INFO button on the remote control. The PDP will
display the Picture mode, Sound mode, MTS, Signal and
Caption.
Press the INFO button on the remote control again.
The PDP will display the Clock.
Press the Power button on the remote control.
The PDP will be turned on and you will be ready to use it’s
features.
You can also use the POWER(
) button on the front of the
PDP.
Ant 6
Picture
Sound
MTS
Signal
Caption
:
:
:
:
:
Custom
Custom
Mono
Mono
Off
Notes:
• If your PDP isn’t turned on when the power button is
pressed: Press the MODE button to check if the TV mode
has been chosen (
).
07 : 30 am
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it convenient and fast to use features on the PDP. Your PDP also lets you display the status of many of your PDP’s
features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the screen.
The Picture menu is selected.
Picture
Mode
Adjust
Color Tone
DNIe
Move
2
30
Custom
Normal
On
Enter
Menu
Press the UP/DOWN buttons to move items in the menu.
Press the LEFT/RIGHT buttons to display, change, or use
the selected items.
Press the ENTER (
) button to enter items in the menu.
On screen menus disappear from the screen
automatically after about thirty seconds, or you can
press the EXIT button on your remote control to exit
the menu.
31
Memorizing the Channels
Your PDP can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and CH
buttons to scan through the channels. This eliminates the need to change channels by entering
the channel digits. There are three steps for memorizing channels: selecting a broadcast
source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of
signal source that is connected to the PDP (i.e., an antenna or a cable system).
1
Press the MENU button. Press the UP or DOWN
button to select “Channel”, then press the ENTER
button.
3
Press the LEFT or RIGHT button to select “Ant”,
“STD”, “HRC” or “IRC”.
• If you are connected to an antenna, leave "Ant"
displayed. If you connected cable, press the
LEFT or RIGHT button to the display the type of
cable system: "STD", "HRC", or "IRC".
(If you are not sure which type of cable system you
have, contact your cable company).
1
First, select the correct signal source (Ant, STD, HRC,
IRC). See steps on previous page.
Press the MENU button. Press the UP or DOWN button
to select “Channel”, then press the ENTER button.
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Ant
0
Off
➤ Quick way to access the Automatic Channel Setting : Just press the
“AUTO PROG.” button on the remote control.
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
2
Storing Channels in Memory (Automatic Method)
0
Off
Select
2
Press the UP or DOWN button to select “Auto Program”, then press the ENTER button.
Menu
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
Move
Select
Menu
Ant
Channel
Ant / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
Ant
0
Off
Enter
Menu
STD
0
Off
Select
Menu
3
The PDP will begin memorizing all of the available
channels.
After all the available channels are stored, the
Auto program menu reappears. Press the RIGHT
button to stop.
Ant 50
Auto Program
: Stop
Press the MENU button to exit.
Note
• The PDP automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
Note
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company
to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to “Storing Channels in Memory”
(next page).
32
33
Adding and Erasing Channels (Manual Method)
1
Use the number buttons to directly select the channel that
will be added or erased.
To View Memorized Channel (PIP Mode)
Ant 4
1
Press the MENU button. Press the UP or DOWN
button to select “Channel”, then press the ENTER
button.
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Ex) Channel “4”
Move
2
Press the ADD/DEL button:
Repeatedly pressing this button will alternate between
“Added” and “Erased.”
2
Press the UP or DOWN button to select “Ch Scan”,
then press the ENTER button.
Only the memorized channels are chosen.
Press the RIGHT button to stop.
0
Off
Select
Menu
Channel
Ant / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
Ant 4
Added
Ant
Ant
0
Off
Enter
Menu
Ch. Scan
Ant 7
: Stop
Note
• You can view any channel (including an erased channel) by using the number buttons on the remote
control.
34
35
Setting Up Your Remote Control
This PDP's remote control can operate almost any VCR, cable box or DVD. After it has been set up
properly, your remote control can operate in four different modes :TV, VCR, Cable or DVD.
Pressing the corresponding button on the remote control allows you to switch between these modes,
and control whichever piece of equipment you choose.
Changing Channels
Using the Channel Buttons
Press the CH
or CH
Note :
buttons to change channels.
●
●
When you press the CH
or CH
buttons, the PDP changes channels
in sequence. You will see all the channels that the PDP has memorized.
(The PDP must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
The remote control may not be compatible with all DVD Players, VCRs, Cable boxes.
The remote control can operate only on STB made by Samsung.
Setting Up the Remote to Operate Your VCR, Cable box or DVD player
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”. The TV will change channels when you
press the second number.
When you use the number buttons, you can directly select channels that were
either erased or not memorized. To change to single-digit channels (0~9) faster,
press “0” before the single digit. (For channel “4” press “0”, then “4”.
Using the Pre-CH button to select the previous channel
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then,
use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
1
Turn off your VCR. (or Cable box, DVD player)
2
Press the MODE button. Mode is changed whenever
MODE button is pressed(New mode is displayed on
LED screen).
3
Press the SET button on your TV's remote control.
4
Using the number buttons on your remote control,
enter three digits of the VCR (or Cable box, DVD
player) code listed on page 38 of this manual for
your brand of VCR (or CATV, DVD). Make sure you
enter three digits of the code, even if the first digit
is a "0".
(If more than one code is listed, try the first one.)
5
Press the Power button on the remote control.
Your VCR (or CATV, DVD) should turn on if your
remote is set up correctly. If your VCR (or CATV,
DVD) does not turn on after setup, repeat steps
2, 3, and 4, but try one of the other codes listed for
your brand of VCR (or CATV, DVD).
If no other codes are listed, try each code, 000
through 089 (or Cable box: 000 through 077,
DVD player: 000 through 008).
Using the Volume Buttons
Press the VOL + or VOL – buttons to increase or decrease the volume.
Using Mute
Using the MUTE Buttons
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and the sound cuts off.
The word “Mute” will appear in the lower-left
corner of the screen.
Notes
• When your remote control is in “VCR” mode, the VCR control buttons (Stop, REW, Play/Pause, FF)
still operate your VCR.
2
36
To turn mute off, press the MUTE button again, or
simply press the VOL + or VOL – button.
Mute
• When your remote control is in “CATV” or “DVD” mode, the VCR control buttons (Stop, REW,
Play/Pause, FF) still operate your VCR.
37
Remote Control Codes
VCR Codes
P
Cable Box Codes
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Picture Control
Customizing the Picture ................................................................40
Using Automatic Picture Settings ....................................................41
Selecting the Color Tone................................................................42
DNIe (Digital Natural Image engine) ............................................43
Viewing the Picture-in-Picture..........................................................44
Changing the Screen Size ............................................................50
Freezing the Picture ......................................................................51
DVD Codes
38
1
Customizing the Picture
Using Automatic Picture Settings
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
and Tint settings of your PDP.
Your PDP has automatic picture settings that allow you to adjust the video display easily.
Press the MENU button, then press the ENTER
button.
1
Picture
Mode
Adjust
Color Tone
DNIe
Custom
Custom
On
Press the MENU button, then press the ENTER
button.
➤ Quick way to access the picture setting: Just press the “P.MODE”
Picture
Mode
Adjust
Color Tone
DNIe
Custom
Custom
On
button under the cover of the remote control.
Move
2
Press the UP or DOWN button to select “Adjust”,
then press the ENTER button.
You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color” and “Tint”.
Press the UP or DOWN button to select the item you
wish to change.
2
Normal
On
Enter
Adjust
Press the LEFT or RIGHT button to select “Custom”,
“Dynamic”, “Standard” or “Movie” picture setting.
• You can select “High”, “Middle”, “Low” or
“Custom” in PC/DVI mode.
80
50
50
50
G 50
3
Select
Menu
Picture
Mode
Adjust
Color Tone
DNIe
Move
Menu
Adjust
Dynamic
Custom
On
Select
Menu
Press the MENU button to exit.
Menu
Press the LEFT or RIGHT button to change the value
of the item.
Contrast
5
Move
Custom
Contrast
Brightness
Sharpness
Color
Tint
R 50
Move
4
Menu
Picture
Mode
Adjust
Color Tone
DNIe
Move
3
Select
82
Press the MENU button to exit.
Note
• In the PC/DVI mode, you can’t adjust the Sharpness, Color and Tint.
• The Tint cannnot be adjusted in Component(480p, 720p, 1080i) mode.
40
41
Selecting the Color Tone
DNIe (Digital Natural Image engine)
Samsung’ s New Technology brings you more detailed images with contrast and
white enhancement and 3D noise reduction.
1
Press the MENU button, then press the ENTER
button.
Picture
Mode
Adjust
Color Tone
DNIe
Move
2
3
Press the UP or DOWN button to select “Color
Tone”, then press the LEFT or RIGHT button to select
“Normal”, “Warm1”, “Warm2”, “Cool2” or
“Cool1”.
• You can select “Custom”, “Color1”, “Color2” or
“Color3” in PC mode.
• You can select “Color1”, “Color2” or “Color3” in
DVI mode.
Custom
Select
Move
Press the MENU button, then press the ENTER
button.
➤ Quick way to select DNIe : Simply press the “DNIe” button under
Custom
On
the cover of the remote control.
Menu
Picture
Mode
Adjust
Color Tone
DNIe
1
Custom
Move
2
Press the UP or DOWN button to select “DNIe”,
then press the LEFT or RIGHT button to select
“On”, “Off” or “Demo”.
Normal
On
Select
Picture
Mode
Adjust
Color Tone
DNIe
• On : Switches on the DNIe mode.
• Demo : The screen before applying DNIe
appears on the right and the screen after
applying DNIe appears on the left.
• Off : Switches off the DNIe mode.
Menu
Press the MENU button to exit.
.
Custom
On
Select
Menu
Picture
Mode
Adjust
Color Tone
DNIe
Move
Custom
Normal
On
Select
Menu
DNIe Demo
DNIe On
3
Custom
DNIe Off
Press the MENU button to exit.
Note
• The DNIe function doesn’t operate in the DVI modes.
42
43
Viewing the Picture-in-Picture
Selecting the PIP Screen
1
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
Press the MENU button. Press the UP or DOWN
button to select “PIP”, then press the ENTER button.
PIP
Select
Off
1
➤ Quick way to access the PIP mode: Just press the “PIP” button on
Press the MENU button. Press the UP or DOWN
button to select “PIP”, then press the ENTER button.
the remote control.
Select
Menu
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
2
Press the LEFT or RIGHT button to select “On”.
The PIP image will appear in the corner of the
screen.
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
2
On
TV
Ant
Ant 5
Menu
Press the MENU button to exit.
3
O : PIP and Swap Operate
X : PIP doesn’t Operate
PIP Settings
PIP screen
Main screen
TV
Video
S-Video
Component 1
Component 2
PC
DVI
44
TV
Video
S-Video
Component 1
Component 2
PC
DVI
O
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
X
X
X
X
O
O
O
X
X
X
X
O
O
O
X
X
X
X
O
O
O
X
X
X
X
Press the LEFT or RIGHT button to cycle through
all of the available signal sources:
“TV”, “Video”, “S-Video”, “Component 1”,
“Component 2”, “PC” and “DVI”.
The signal from these inputs will not appear if you
have not connected any equipment to the PDP's
respective input jacks.
4
Ant
Ant 5
Select
Menu
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
3
Large
Press the UP or DOWN button to select “Source”.
Large
Select
On
TV
On
TV
Large
Ant
Ant 5
Select
Menu
PIP
Select
Source
Swap
Size
Locate
Move
On
Video
Large
Select
Menu
Press the MENU button to exit.
Note
• The PIP function operates in Wide screen.
• Using Multi-Screen in the Normal, Zoom1 or Zoom2 screen will change the size of the main screen
to Wide screen.
45
Swapping the Contents of the PIP Image and Main Image
1
Press the MENU button. Press the UP or DOWN
button to select “PIP”, then press the ENTER button.
➤ Quick way to access swapping: Just press the “SWAP” button under
the cover of the remote control.
Press the UP or DOWN button to select “Swap”,
then press the ENTER button.
• The image in the PIP window will appear on the
main screen, and vice versa.
Press the MENU button to exit.
On
TV
Press the MENU button. Press the UP or DOWN
button to select “PIP”, then press the ENTER button.
➤ Quick way to access the PIP size: Just press the “SIZE” button
Large
under the cover of the remote control.
Ant
Ant 5
Select
Menu
On
TV
Press the LEFT or RIGHT button to select “Small”,
“Double” or “Large”.
Menu
On
TV
Large
Ant
Ant 5
Select
Menu
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
46
Ant
Ant 5
Select
PIP
Move
Menu
4
Large
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Ant
Ant 5
3
On
TV
Press the UP or DOWN button to select “Size”.
Large
Enter
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
2
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
3
1
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
2
Changing the Size of the PIP Window
On
TV
Small
Ant
Ant 5
Select
Menu
Press the MENU button to exit.
47
Changing the Location of the PIP Image
1
Press the MENU button. Press the UP or DOWN
button to select “PIP”, then press the ENTER button.
Changing the PIP Channel
Move
2
Press the LEFT or RIGHT button to move the PIP
screen where you want.
48
Press the MENU button to exit.
“CH▼” button under the cover of the remote control.
Ant
Ant 5
Select
Press the MENU button. Press the UP or DOWN
button to select “PIP”, then press the ENTER button.
➤ Quick way to change the PIP channel: Just press the “CH▲“ or
Large
Menu
On
TV
Press the UP or DOWN button to select “Ant/CATV”.
Press the LEFT or RIGHT button to select “Ant”,
“STD”, “HRD” or “IRC”.
Large
Ant
Ant 5
Select
3
On
TV
Press the UP or DOWN button to select “Channel”.
Press the LEFT or RIGHT button to change the
channel that appears in the PIP window.
Large
Ant
Ant 5
Select
4
Large
Ant
Ant 5
Select
Menu
PIP
On
TV
Large
STD
STD 5
Select
Menu
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
Menu
On
TV
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
Menu
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
2
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
Move
4
On
TV
Press the UP or DOWN button to select “Locate”.
Move
3
1
PIP
Select
Source
Swap
Size
Locate
Ant/CATV
Channel
On
TV
Large
STD
STD 9
Select
Menu
Press the MENU button to exit.
49
Changing the Screen Size
When you press the ASPECT button on the remote control, the PDP’s screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal.
Note
Changing the Screen Size
Still
Press the Still button on the remote control to freeze a
moving picture. Press again to cancel.
• If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may
be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible.
W ide
Zoom2
Sets the picture to 16:9 wide mode.
The screen size when the Zoom1 screen is
vertically enlarged.
Wide
Zoom2
Up/Down
Panorama
Normal (4:3)
Converts regular 4:3 aspect ratio screen to
wide screen.
Sets the picture to 4:3 normal mode.
Panorama
Normal
Zoom1
The screen size when Wide screen is vertically
enlarged.
Zoom1
Up/Down
Notes
50
• In TV, VIDEO, S-VIDEO and Component(480i) modes, all screen modes can be selected.
(Wide ➝ Panorama ➝ Zoom1 ➝ Zoom2 ➝ Normal).
• In PC/DVI mode, only Wide & Normal modes can be selected.
• In Component(480p, 720p. 1080i) modes, Panorama mode can’t be selected.
• In Component(480p, 720p. 1080i) modes, you can move the picture on screen by pressing
the Up▲ or Down▼ button. (All screen modes)
• Changing the screen size to Normal, Zoom1 or Zoom2 during PIP mode will cause the PIP
window to disappear.
51
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Sound Control
Customizing the Sound ................................................................54
Using Automatic Sound Settings ....................................................55
Choosing a Multi-Channel Sound (MTS)Soundtrack ..........................56
Using the Auto Volume ..................................................................57
Using Dolby Virtual ......................................................................58
Using a Subwoofer ......................................................................59
Customizing the Sound
1
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
Press the UP or DOWN button to select “Adjust”,
then press the ENTER button.
You will also see the items “Bass”, “Treble” and
“Balance”.
Press the UP or DOWN button to select the item you
wish to change.
54
Select
Menu
Move
2
Custom
Press the LEFT or RIGHT button to select “Adjust”,
“Standard”, “Music”, “Movie” or “Speech” sound
setting.
Mono
Off
Off
Enter
L 50
Adjust
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
50
50
R 50
3
Mono
Off
Off
Select
Menu
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Menu
Custom
Music
Off
Off
Select
Menu
Press the MENU button to exit.
Menu
Press the LEFT or RIGHT button to change the value
of the item.
Bass
5
Off
Off
Adjust
Bass
Treble
Balance
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
Mono
Sound
Move
4
Custom
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
3
1
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
2
Using Automatic Sound Settings
82
Press the MENU button to exit.
55
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Using the Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary to
adjust the volume every time the channel is changed. “Auto volume” lets you automatically
adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Depending on the particular program being broadcast, you can listen to stereo, mono,
or a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
1
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
➤ Quick way to access the MTS menu: Just press the “MTS” button on
the remote control.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
2
Press the LEFT or RIGHT button to select “Mono”,
“Stereo” or “SAP”.
Select
Menu
Standard
Move
2
Press the UP or DOWN button to select “Auto
Volume”.
Off
Off
Select
3
Stereo
Off
Off
Select
Press the LEFT or RIGHT button to select “On”.
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
Menu
4
Press the MENU button to exit.
•
Choose Stereo for channels that are broadcasting in stereo.
•
Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving
a stereo signal.
•
Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation.
Mono
Off
Off
Select
Menu
Standard
Mono
Off
Off
Select
Menu
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
4
Custom
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Menu
Standard
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
Mono
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
1
Mono
Press the UP or DOWN button to select “MTS”.
Move
3
Custom
Standard
Mono
On
Off
Select
Menu
Press the MENU button to exit.
Note
• The MTS function operates in TV mode only.
56
57
Using Dolby Virtual
Using a Subwoofer
This feature allows the PDP’s optional L/R speakers to provide a Home Theater-like Dolby
effect. The center and surround sounds are mixed into the L/R speakers.
1
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
➤ Quick way to access the Surround: Just press the “SURROUND”
button on the remote control.
1
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
2
Press the UP or DOWN button to select “Dolby
Virtual”.
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Press the LEFT or RIGHT button to select “On”.
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
Mono
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Off
Off
Select
Move
Menu
2
Press the UP or DOWN button to select “Woofer”,
then press the ENTER button.
Standard
Custom
Mono
Off
Off
Select
Menu
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Mono
Move
Standard
Mono
Off
Off
Enter
Menu
Off
Off
Select
Menu
3
Press the LEFT or RIGHT button to select “On”.
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
Woofer
Woofer
Volume
Cutoff Freq.
On
50
120Hz
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move
4
Custom
Sound
Move
3
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
Standard
Move
Select
Menu
Mono
Off
On
Select
Menu
4
Press the UP or DOWN button to select “Volume”,
then press the LEFT or RIGHT button to adjust the
value of the item.
This sets the volume for the subwoofer.
Woofer
Woofer
Volume
Cutoff Freq.
On
50
120Hz
Press the MENU button to exit.
Move
Adjust
Menu
Volume
5
6
58
Press the UP or DOWN button to select “Cutoff
Freq.”, then press the LEFT or RIGHT button to adjust
the value of the item.
This sets the cutoff frequency for the subwoofer.
For example, if you set the cutoff frequency at
130Hz, the subwoofer will reproduce frequencies
of 130Hz and lower.
65
Woofer
Woofer
Volume
Cutoff Freq.
Move
On
50
130Hz
Adjust
Menu
Press the MENU button to exit.
59
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Channel Control
Fine Tuning Channels....................................................................62
LNA (Low Noise Amplifier) ............................................................63
1
Fine Tuning Channels
LNA (Low Noise Amplifier)
Use fine tuning to manually adjust a particular channel for optimal reception.
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
Press the MENU button. Press the UP or DOWN
button to select “Channel”, then press the ENTER
button.
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
2
Press the UP or DOWN button to select “Fine
Tune”.
Press the LEFT or RIGHT button to adjust the fine
tuning.
4
To store the fine tuning setting in the TV’s memory,
press the UP button.(A star icon<*>will appear.)
To reset the fine tuning to “0”, press the DOWN
button.
62
Press the MENU button. Press the UP or DOWN
button to select “Channel”, then press the ENTER
button.
Menu
Air
2
Press the UP or DOWN button to select “LNA”.
Menu
Channel
Air
+3
Off
Adjust
Press the LEFT or RIGHT button to select “On.”
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
Menu
Channel
Air / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Air
Select
Menu
Air
0
Off
Select
Menu
Channel
Air / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
4
0
Off
Channel
Move
3
Ant
Air / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Off
Adjust
Channel
Ant/ CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
0
Air / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Add/Erase
5
Select
Channel
Add/Erase
1
0
Off
Air / CATV
Auto Program
Fine Tune
LNA
Ch. Scan
Move
3
Ant
Air
0
On
Select
Menu
Press the MENU button to exit.
+3
Off
Adjust
Menu
Press the MENU button to exit.
63
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Connecting a PC and Operation
Connecting to a PC ......................................................................66
Adjusting the PC Screen................................................................70
Changing the Position of the Image................................................71
Changing the Size of the Image ....................................................72
Information ..................................................................................73
Picture Quality Adjustment ............................................................74
Connecting to a PC
Connection to a Macintosh computer may require in adapter.
PDP
Pin Configuration
D-Sub Cable
DVI-D Cable (Digital-Only Connector)
• 15Pin Signal Cable (based on protruded pin)
Power Plug
Use the DVI-D
connection cable.
(sold separately)
DVI Cable
Ferrite Cores(HPN5039)
or
PC Cable
Audio Cable
PC
DVI jack
(The actual configuration on your PC
may be different,
depending on the
model.)
Setting up Your PDP (Plug and Play)
Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming
setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual
setup hassles and confusion. Your PC system can easily identify and configure itself for use with your
display. This monitor automatically tells the PC system its Extended Display Identification data (EDID)
using Display Data Channel (DDC) protocols.
Connecting a PC to the PDP
1
Connect a PC (15pin) cable between the PC Output jack (or DVI jack) on the PC and the
RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP.
2
Connect a Audio cable between the Audio (RGB or DVI) on the PC and the Audio L/R (RGB
or DVI) input jacks on the PDP.
To watch the PC screen:
1. Turn on your PDP, and press the TV/VIDEO button on the remote control.
2. Press the UP or DOWN button to select “PC”, then press the ENTER button.
3. Turn on PC and check for PC system requirements. (Refer to pages 66 and 67
for PC system requirements.)
4. Adjust the PC screen. (Refer to pages 70 and 76.)
66
67
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. However, the actual screens
on your PC will probably be different, depending upon your particular version of Windows and your
particular video card. But even if your actual screens look different, the same, basic set-up information
will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
Notes:
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Video signal
On the windows screen, select in the following
sequence : Start ➝ Settings ➝ Control Panel.
Dot X Line
Vertical
Frequency (Hz)
Horizontal
Frequency (KHz)
Vertical
polarity
Horizontal
polarity
640 X 350
70.086
31.469
N
P
85.080
37.861
N
P
70.087
31.469
P
N
85.039
37.927
P
N
59.940
31.469
P
N
72.809
37.861
N
N
75.000
37.500
N
N
85.008
43.269
N
N
56.250
42.925
N/P
N/P
60.317
37.879
P
P
72.188
48.077
P
P
75.000
46.875
P
P
85.061
53.674
P
P
60.004
48.363
N
N
70.069
56.476
N
N
75.029
60.023
P
P
84.997
68.677
P
P
1280 X 768*
60.000
47.700
P
N
1280 X 1024*
60.020
63.981
P
P
720 X 400
640 X 480
IBM PC / AT
Compatible
When the control panel screen appears, click on
“Display” and a display dialog-box will appear.
800 X 600
1024 X 768
• Support only 1280 X 768 mode of W-XGA formats.
Select the “Settings” tab in the display dialogbox.
• The interlace mode is not supported.
The two key variables that apply to the PDP-PC
interface are “resolution” and “colors”.
The correct settings for these two variables are:
Notes:
• Size (sometimes called “resolution”)
:1024 X 768 pixels
• Color: “24-bit” color (might also be expressed as “16 million colors”)Shown at left is
a typical screen for “Display” dialog box.
If a vertical-frequency option exists on your
display settings dialog box, the correct value is
“60” or “60 Hz.” Otherwise, just click “OK”
and exit the dialog box.
Continued...
68
• The PDP operates abnormally if a non-standard video format is selected.
• When this PDP is used as a PC display, 32-bit color is supported.
• Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows).
Check your PC instruction book for information about connecting your PC to a PDP.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ
(horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power
is turned off (or if the PC is disconnected). If so, press the TV/VIDEO button to enter the VIDEO
mode. Also, make sure that the PC is connected.
• Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise,
random signals might appear).
• When DVI is selected as an input, * mode is not supported.
• When this TV is connected to PC, there are some cases that DOS mode or CMOS BIOS mode is not
perfectly compatible with some PCs. However, this is not a fault.
69
Adjusting the PC Screen
Changing the Position of the Image
Adjusting the R.G.B
After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned.
Preset:
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
Preset:
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
1
Press the MENU button, then press the ENTER
button.
1
Picture
Mode
Adjust
Color Tone
Color Adjust
DNIe
Move
2
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button.
Press the UP or DOWN button to select “Color
Tone”, then Press the LEFT or RIGHT button to select
“Custom”. When “Custom” is selected, the word
“Color Adjust” will appear on the screen.
Custom
PC
Position
Adjust
Scaling
Information
Auto Adjust
Custom
Move
On
Select
Mode
Adjust
Color Tone
Color Adjust
DNIe
2
Press the MENU button, then adjust the screen position by using the UP/DOWN/LEFT/RIGHT button.
Press the UP or DOWN button to select “Color
Adjust”, then press the ENTER button.
Custom
Custom
On
4
Press the UP or DOWN button to select the item you
want to change, then press the RIGHT or LEFT
button to change the value of the item, using the
on-screen gauge as your guide.
3
Custom
Menu
Press the MENU button to exit.
Custom
On
Enter
Menu
Adjust
Red
Green
Blue
Red
70
Move
Menu
Picture
Move
5
Select
Mode
Adjust
Color Tone
Color Adjust
DNIe
Move
Menu
Position
Move
3
Enter
Menu
Picture
Move
Wide
50
50
50
Adjust
Menu
82
Press the MENU button to exit.
71
Changing the Size of the Image
Information
Preset:
Preset:
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
1
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button.
Move
2
3
Enter
2
PC
Wide
Select
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Menu
Position
Adjust
Scaling
Information
Auto Adjust
Move
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button.
Wide
Press the UP or DOWN button to select “Scaling”.
Press the LEFT or RIGHT button to select “Wide”
or “Normal”.
1
PC
Position
Adjust
Scaling
Information
Auto Adjust
Press the UP or DOWN button to select “Information”, then press the ENTER button.
The vertical, horizontal frequencies and resolution
appear.
Menu
Wide
Enter
Menu
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Wide
Enter
Menu
Information
PC
Position
Adjust
Scaling
Information
Auto Adjust
Resolution
H-Frequency
V-Frequency
Normal
:
:
:
1024 * 768
48.52 KHz
60.21 Hz
Menu
Move
4
72
Press the MENU button to exit.
Select
Menu
3
Press the MENU button to exit.
73
Picture Quality Adjustment
Picture Automatic Adjustment
Coarse Adjustment
Preset:
Preset:
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
1
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button.
Move
2
Press the UP or DOWN button to select “Auto
Adjust”, then press the ENTER button.
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Wide
Enter
Menu
Move
2
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
3
1
PC
Position
Adjust
Scaling
Information
Auto Adjust
Press the UP or DOWN button to select “Adjust”,
then press the ENTER button.
The message “Auto Adjust” appears on the screen
and the picture adjustments are automatically
activated.
Move
Auto Adjust
Enter
Menu
Adjust
50
7
Corase
Fine
Remove picture noise (vertical stripes) on the screen
by pressing the LEFT or RIGHT button. (If Coarse is
not set properly, vertical stripes will appear on the
screen.)
Adjust
Menu
Press the MENU button to exit.
Coarse
4
74
Wide
Press the UP or DOWN button to select “Coarse”.
Move
4
Menu
PC
Menu
3
Enter
Position
Adjust
Scaling
Information
Auto Adjust
Wide
Enter
Wide
53
Press the MENU button to exit.
75
Fine Tuning (Fine)
Preset:
• Press the TV/VIDEO button, then press the UP or DOWN button to select PC.
Press the ENTER button to select PC mode.
1
Press the MENU button. Press the UP or DOWN
button to select “PC”, then press the ENTER button.
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
2
Press the UP or DOWN button to select “Adjust”,
then press the ENTER button.
Wide
Enter
Menu
PC
Position
Adjust
Scaling
Information
Auto Adjust
Move
Wide
Enter
Menu
P
3
Press the UP or DOWN button to select “Fine”.
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
Adjust
50
7
Corase
Fine
Remove picture noise on the screen by pressing the
LEFT or RIGHT button. (If Fine is not set properly,
noise will appear on the screen.)
Time Setting
Move
Adjust
Menu
Setting the Clock .......................................................................78
Setting the Sleep Timer...............................................................79
Setting the Timers ......................................................................80
Fine
4
76
Press the MENU button to exit.
53
Setting the Preferred Channel and Volume Level ............................82
L
Setting the Clock
Setting the Sleep Timer
You can set your PDP to automatically turn off after a preset interval.
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Move
2
Press the UP or DOWN button to select “Time”, then
press the ENTER button.
Press the LEFT or RIGHT button to select hour, then
press the UP or DOWN button to select the correct
hour.
Press the LEFT or RIGHT button to select minute, then
press the UP or DOWN button to select the correct
minute.
5
on the remote control.
Off
Select
Menu
Press the UP or DOWN button to select “Time”, then
press the ENTER button.
Off
Off
Off
Enter
Menu
Time
10 : - - am
- - : - - am
- - : - - am
Move
Off
Off
Off
10
3
10 : 30 am
- - : - - am
- - : - - am
Move
3
Off
Off
Off
10
3
Menu
English
Off
Off
Off
Enter
Menu
Time
Clock
10 : 30 am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Press the LEFT or RIGHT button to select the time
interval for the PDP to stay on. The interval ranges
from 10 to 180 minutes.
Select
Off
Off
Off
10
3
Menu
Time
Clock
10 : 30 am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
5
Off
Select
Press the UP or DOWN button to select “Sleep”.
Menu
Press the MENU button to exit.
Off
Off
Function
Move
4
English
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
Menu
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
English
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
➤ Quick way to access the sleep timer: Just press the “SLEEP” button
Off
Off
Function
Adjust
4
English
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
3
1
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Select
Off
Off
30
10
3
Menu
Press the MENU button to exit.
Note
• Time setting will be reset when you pull out the Power cord if the PDP is ON.
(If you want to keep the time setting, turn the PDP off using the POWER button on the remote control
or the Front Panel.)
78
79
Setting the Timers
This PDP can be set to turn on or off automatically at specific times that you choose. Before
using the timers, you must set the PDP’s clock, as described previously.
Setting the On/Off Timer
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Press the UP or DOWN button to select “Time”, then
press the ENTER button.
Press the LEFT or RIGHT button to select minute, then
press the UP or DOWN button to select the correct
minute.
7
If you want to set Off Time, press the UP or DOWN
button to select the “Off Time”.
Set the “Off Time” just as you set “On Time”.
Off
Off
10 : 30 am
7 : 30 am
- - : - - am
On
Off
Off
10
3
Move
Menu
Time
Clock
12 : 00 am
On Time
7 : 30 am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
On
Off
Off
10
3
Off
Enter
Move
Menu
8
Time
10 : 30 am
- - : - - am
- - : - - am
Select
Off
Off
Off
10
3
Menu
Select
Menu
Press the MENU button to exit.
Note
• If you set to On Time or Off Time, the Power Indicator on the Front Panel is changed to Green.
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
10 : 30 am
7 : - - am
- - : - - am
Move
Off
Off
Off
10
3
Menu
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
80
Adjust
Menu
English
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Adjust
5
Time
Clock
On Time
Off Time
Sleep
On Time Volume
On time Channel
Off
Select
Press the UP or DOWN button to select “On Time”.
Press the LEFT or RIGHT button to select hour, then
press the UP or DOWN button to select the correct
hour.
Press the LEFT or RIGHT button to select “Off” or
“On”, then press the UP or DOWN button to select
“Off” or “On”.
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
4
English
Function
Move
3
6
Function
10 : 30 am
7 : 30 am
- - : - - am
Move
Off
Off
Off
10
3
Menu
81
Setting the Preferred Channel
and Volume Level
The preferred channel and volume can be set for when the timer automatically turns on the TV.
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Press the UP or DOWN button to select “Time”, then
press the ENTER button.
Off
Select
Press the UP or DOWN button to select “On Time
Volume”.
Press the LEFT or RIGHT button to adjust volume
level.
Press the UP or DOWN button to select “On Time
Channel”.
Press the LEFT or RIGHT button to select the channel.
Menu
Function
English
Off
Off
Off
Enter
Menu
Time
Clock
- - : - - am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
4
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
3
English
Select
Off
Off
Off
10
3
Menu
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
Time
Clock
- - : - - am
On Time
- - : - - am
Off Time
- - : - - am
Sleep
On Time Volume
On Time Channel
Move
Select
Off
Off
Off
10
3
Menu
Function Description
Selecting a Menu Language .....................................................84
Viewing Closed Captions .........................................................85
Digital Noise Reduction ...........................................................86
Setting Auto Power Off ...........................................................87
Using the V-Chip .....................................................................88
Selecting the Film Mode ...........................................................94
82
L
Selecting a Menu Language
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Your TV decodes and displays the closed captions that are broadcast with certain
TV shows. These captions are usually subtitles for the hearing impaired or foreignlanguage translations. All VCRs record the closed caption signal from television
programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well. Check for the
closed caption symbol in your television schedule and on the tape’s packaging:
Note: The Caption feature does not work with DVD or DTV signals.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Viewing Closed Captions
Off
Off
1
Off
Select
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Menu
Press the LEFT or RIGHT button to select the appropriate language : English, Français or Español.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Press the UP or DOWN button to select “Caption”,
then press the ENTER button.
English
Off
Off
Off
Select
Menu
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
3
.
English
English
Off
Off
Off
Enter
Menu
Press the MENU button to exit.
3
Press the LEFT or RIGHT button to turn closed captioning On/Off.
Caption
Caption
Mode
Channel
Field
Move
4
Press the UP or DOWN button to select “Mode”,
then press the LEFT or RIGHT button to select
“Caption” or “Text.”
Select
Menu
Caption
Caption
Mode
Channel
Field
Move
5
On
Caption
2
1
On
Text
2
1
Select
Menu
Depending on the particular broadcast, it might be
necessary to make changes to “Channels” and
“Field”: Press the UP/DOWN/LEFT/RIGHT button
to make the changes. (Follow the same procedure
as in steps 3~4 above.)
Press the MENU button to exit.
Note
• Different channels and fields display different information: Field 2 carries additional information
that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English,
while Channel 2 has subtitles in Spanish.
84
85
1
Digital Noise Reduction
Setting Auto Power Off
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
The PDP can be set to turn off automatically if no buttons are pressed for 3 hours
after the PDP turns on via the On timer.
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Press the UP or DOWN button to select “NR”.
4
Press the MENU button to exit.
Menu
English
2
Press the UP or DOWN button to select “Auto
Power Off”.
Off
Select
Menu
Function
English
3
Off
Off
Off
Select
English
Off
Off
Off
Select
Menu
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Menu
Menu
Function
Press the LEFT or RIGHT button to select “On”.
Off
Move
4
English
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
On
Off
Select
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Off
Select
Function
Press the LEFT or RIGHT button to select “On”.
1
Off
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
3
English
English
Off
On
Off
Select
Menu
Press the MENU button to exit.
Note
• If the Off timer is set, Auto Power Off will not function.
• The power will be turned off automatically after 15 minutes if the PDP is ON and there is no input
signal. (For instance, if you select a channel without a signal while in TV mode or when there is no
input signal after selecting an output signal)
86
87
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate
for children. The user must enter a PIN (personal ID number) before any of the V-Chip
restrictions are set up or changed.
Note : When the V-chip feature is activated, the PIP and auto channel program features
do not function.
Setting Up Your Personal ID Number (PIN)
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
1
2
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
4
5
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
English
Off
Off
Off
Select
Menu
Off
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Menu
2
Press the UP or DOWN button to select “V-Chip”,
then press the ENTER button.
English
Off
On
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
English
Off
On
Off
Enter
Menu
Off
Enter
Menu
3
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
V-Chip
Enter Pin
V-Chip
Enter Pin
: ----
Enter Pin
Enter Pin
: ----
4
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
The Change pin screen will appear. Choose any
4-digits for your PIN and enter them.
As soon as the 4 digits are entered, the “Confirm
New Pin” screen appears. Re-enter the same 4
digits. When the Confirm screen disappears, your
PIN has been memorized.
Off
Off
Function
Note: The default PIN number of a new TV set is
“0-0-0-0.”
The “V-Chip” screen will appear. Press the UP or
DOWN button to select “Change Pin,” then press
the ENTER button.
English
Select
Move
3
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Function
Move
Press the UP or DOWN button to select “V-Chip”,
then press the ENTER button.
How to Enable/Disable the V-Chip
No
The “V-Chip” screen will appear.
To enable the V-Chip feature, press the RIGHT button
so that the “V-Chip Lock” field is Yes.
(Pressing the left or right button will alternate
between “Yes” and “No”.)
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
Enter
Yes
Select
Menu
Menu
5
V-Chip
Press the MENU button to exit.
Change Pin
Enter New Pin : - - - -
V-Chip
Confirm New Pin
6
Press the MENU button to exit.
Confirm New Pin :
-
Note
88
• If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin
to 0-0-0-0 : Power Off ➔ Mute ➔ 8 ➔ 2 ➔ 4 ➔ Power On.
89
How to Set up Restrictions Using the “TV guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.)
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Press the UP or DOWN button to select “V-Chip”,
then press the ENTER button.
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
Off
Off
Off
The “V-Chip” screen will appear.
Press the UP or DOWN button to select “TV GuideLines”, press the ENTER button.
Off
On
Off
Enter
The “TV GuideLines” screen will appear. Press the
UP or DOWN button to select one of the six agebased categories:
TV-Y
TV-Y7
Young children
Children 7 and over
TV-G
TV-PG
TV-14
TV-MA
General audience
Parental guidance
Viewers 14 and over
Mature audience
Note 2: The V-Chip will automatically block certain categories that are “more restrictive”.
For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then all the categories in the “young adult” group
will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together
similarly. (See next section.)
Menu
V-Chip
Enter Pin
: ----
7
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on
previous page).
Next, while the TV-Rating is selected, repeatedly press the RIGHT button.
This will cycle through the available sub-ratings (FV,L, S, D or V).
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is
blinking, press the UP or DOWN button to change the sub-rating.
Press the RIGHT button to save the TV guidelines. A TV-Rating will be selected and no
letters will select. To select a different TV-Rating, press the UP or DOWN button and then
repeat the process.
Note: The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and
TV-MA will automatically be blocked.
8
Press the MENU button to clear all the screens. (Or proceed to the next section, and set up
additional restrictions based on the MPAA codes).
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
5
FV: Fantasy violence
D: Sexually Sugessive Dialog
L: Adult Language
S: Sexual situation
V: Violence
English
Enter Pin
4
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to
change any of the following sub-ratings:
Menu
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
3
English
Select
No
Enter
Menu
TV GuideLines
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Move
All
U
U
U
U
U
U
FV
U
At this point, one of the TV-Ratings is selected.
Press the RIGHT button : Depending on your existing setup, a letter “U” or “B” will start
blinking.
(U= Unblocked, B= Blocked)
While the “U” or ”B” is blinking, press the UP or DOWN button to block or unblock the
category.
Press the RIGHT button to save the TV guidelines. A TV-Rating will be selected,
and no letters will blink.
To select a different TV-Rating, press the UP or DOWN button and then repeat the process.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
6
V S L D
B : Blocked
U : Unblocked
U
U
U
Select
U
U
U
U
U
U
U
U
Menu
Note
• Note: These categories consist of two separate groups: TV-Y and TV-Y7 (young children
through age 7), and TV-G through TV-MA (everybody else). The TV-Y and TV-Y7 categories
are colored blue.
The restrictions for these two groups work independently: If a household includes very young
children as well as young adults, the TV guidelines must be set up separately for each age
group. (See next step.)
90
91
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, X
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is
for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank
and the following message will appear: “Excessive rating.”
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Press the UP or DOWN button to select “V-Chip”,
then press the ENTER button.
3
The message "Enter Pin" will appear. Enter your
4-digit PIN number.
English
Off
Off
Off
Select
The “V-Chip” screen will appear. Press the UP or
DOWN button to select “MPAA Rating,” press the
ENTER button.
Off
On
The “MPAA Rating” screen will appear. MPAA category.
Pressing the UP or DOWN button will cycle through the
MPAA categories:
G
General audience (no restrictions).
PG
Parental guidance suggested.
PG-13 PG-13 (Parents strongly cautioned).
R
2
Press the UP or DOWN button to select “V-Chip”, then press the ENTER button.
3
Enter your PIN number, and press the RIGHT button to temporarily disable the V-Chip
Lock.
Off
Enter
Menu
V-Chip
Enter Pin
: ----
V-Chip
V-Chip Lock
TV GuideLines
MPAA Rating
Change Pin
Move
5
Press the MENU button.
English
Enter Pin
4
1
Menu
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
To resume normal viewing, tune to a different channel using the number buttons.
Under certain conditions (depending on the rating of the local TV programs) the V-Chip might
lock out all the channels. In this case, use the V.Chip function for an “emergency escape”:
No
Enter
Menu
MPAA Rating
G
PG
PG-13
R
NC-17
X
NR
Move
U
U
U
U
U
U
U
B : Blocked
U : Unblocked
Enter
Menu
R (Restricted. Children under 17 should be accompanied by an adult).
NC-17 No children under age 17.
92
X
X (Adults only).
NR
Not rated.
While a particular category is selected, press the RIGHT button to activate it.
A selected letter (“U” or “B”) will be displayed. Press the UP or DOWN button to select “U” or ”B”.
Press the RIGHT button to save the settings.
Note: The V-Chip will automatically block any category that is “more restrictive. ”For example,
if you block the “PG-13” category, then “R”, “NC-17” and “X” will automatically be blocked also.
93
Selecting the Film Mode
1
Press the MENU button. Press the UP or DOWN
button to select “Function”, then press the ENTER
button.
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
2
Press the DOWN button to select Film Mode, then
press the RIGHT or LEFT button to select “On” or
“Off”.
•On: Automatically senses and processes film
signals from all sources and adjusts the
picture for optimum quality.
•Off: Switches off the Film mode.
3
English
Off
Off
Off
Select
Menu
Function
Language
Time
Caption
NR
Auto Power Off
V-Chip
Film Mode
Move
English
Off
Off
On
Select
Menu
Press the MENU button to exit.
P
L
A
S
M
A
D
I
S
P
L
A
Y
P
A
N
E
L
Note
• Film mode is supported in Video, S-Video, Component 480i.
Appendix
Troubleshooting............................................................................96
Care and Maintenance ................................................................97
Specifications ..............................................................................98
94
Care and Maintenance
Troubleshooting
Before you call a service technician, please scan this list of problems and possible solutions. It may save you
time and money.
With proper care, your PDP will give you many years of service. Please follow these guidelines to get
the maximum performance from your PDP.
Identifying Problems
Problem
Possible Solution
Poor picture.
Check all wire connections.
Your Remote control does not
operate the PDP.
Press the “Mode” button to put your remote control in the “TV”
mode.
The PDP won’t turn on.
Check if the power plug is connected.
There is no screen image.
Check to see that both the PDP and the source are plugged in
and turned on.
•
•
•
•
Do not put the PDP near extremely hot, cold, humid or dusty places.
Do not put the PDP near appliances that create magnetic fields.
Keep the ventilation openings clear.
Do not place the PDP on a rough and slanted surface, such as cloth or paper.
Liquids
• Do not place liquids near or on the PDP.
Cabinet
96
The image is too light or
too dark.
Adjust the Brightness or Contrast settings.
The image is too large or
too small.
Adjust the Size settings.
• Never open the cabinet or touch the parts inside.
• Wipe your PDP with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
• Do not put heavy objects on top of the cabinet.
Temperature
• If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least two
hours so that moisture that may have formed inside the unit can dry completely.
97
Specifications
Memo
Exterior design and product specifications are subject to change without prior notice to improve
the performance of this product.
This PDP applies to Class B digital device.
(Note: Class B system is for home use.)
This PDP has been registered for residential use in terms of EMI. So it can be used in all areas as
well as residential areas.
Model
Dimensions
Display
Remote Control
Weight
Display
Remote Control
HPN5039 (TYPE NO: AX50P3)
HPN6339 (TYPE NO: AX63P3)
1204.6(W) X 79(D) X 724(H) mm;
1503.4 (W) X 89(D) X 893.8(H) mm;
47.43(W) X 3.11(D) X 28.5(H) inches
59.18(W) X 3.5(D) X 35.18(H) inches
58 (W) X 21 (D) X 210 (H) mm ; 2.28 (W) X 0.83 (D) X 8.27 (H) inches
43 kg ; 94.79 lbs
69kg ; 153lbs
{48 kg ; 105.82 lbs (with stand)}
(82kg ; 181lbs(with stand))
134g ; 0.295 lbs (including batteries)
120V, 60Hz
Voltage
Power Consumption
Number of Pixels
Screen Size
ANTENNA input
VIDEO input
400 Watts
630 Watts
1366(H) X 768(V)
1366(H) X 768(V)
127 cm/50 inches
159 cm/63 inches
VHF, UHF (75Ω unbalanced)
VIDEO
S-VIDEO
COMPONENT 1 - 480i / 480p / 720p / 1080i
COMPONENT 2 - 480i / 480p / 720p / 1080i
RGB : D-SUB 15P
DVI
AUDIO input
VIDEO / S-VIDEO
COMPONENT 1
COMPONENT 2
PC (RGB)
DVI
AUDIO output
10W + 10W (8 Ω)
Subwoofer (500mv RMS at 1KHz)
98
99