M160MV

LED LCD HDTV

1

BEFORE YOU BEGIN

What’s In the Box

• VIZIO HDTV

• VIZIO Remote Control

(including 2 AAA batteries)

• User Manual

(read Safety Guidelines)

• Registration Card

• Quickstart Guide

• AC/DC Power Adapter

• Screen Cleaning Cloth

INSTALLING YOUR HDTV

We provide professional installation services. Visit www.VIZIO.com or call (888) 849.4623 to order today!

Attaching the Stand Base to the TV

1. Place the TV face down on a soft, flat surface.

2. Line up the stand base with the stand neck

(attached to the TV) and carefully push the base

onto the neck.

3. On the bottom of the stand base, turn the

thumbscrew and tighten snugly (see Fig. 1).

4. Move the TV into an upright position and place so that the rear connectors

remain accessible.

FIG. 1

Preparing the TV for Wall Mounting - please refer to "Wall mounting your HDTV" in your User Manual for more information.

MATCH YOUR VIZIO TO A CERTIFIED* WALL MOUNT

ULTRA SLIM

FLUSH MOUNT

ULTRA SLIM

TILT MOUNT

Full Articulating

Mount

XMF1300 XMT1200 / XMT500 XMA1200 / XMA500

*Tested and certified by VIZIO engineers for compatibility with your TV.

©2010 VIZIO Inc. 50650A166400R(A)XXX

3

CONNECTING TO DEVICES

YOU DESERVE

THE BEST!

The inputs listed in the BEST column are OPTIMIZED for High Definition Video and Audio . Connect using these inputs wherever possible.

CONNECTION

ADVICE

PICTURE QUALITY

CONNECTION TYPE

BEST

HIGHEST DIGITAL

QUALITY PICTURE

HDMI DTV/TV

BETTER

ANALOG HD

QUALITY PICTURE

COMPONENT

GOOD

LOW RESOLUTION

NOT RECOMMENDED

AV/S-VIDEO

HDTV TIPS

Make sure you have components with HDMI outputs to ensure the BEST possible picture.

SATELLITE / CABLE GAMING CONSOLE BLU-RAY ™ / DVD

CONNECTOR IMAGE

MAKE THE BEST

HIGH DEFINITION

CONNECTION!

HDMI

USB

RGB PC

Y

AUDIO

COMPONENT AV

Pb Pr V

BACK OF TV

L R

DTV/ATV

VIZIO HIGH DEFINITION CABLES

For more information about VIZIO Certified* High Definition cables please visit us at: www.VIZIO.com

3 WAYS TO WATCH

HIGH DEFINITION VIDEO

1. Get a VIZIO Blu-ray ™ Disc Player.

2. Contact your cable company or satellite

provider to learn more about HD

programming in your local area (an HD

cable box or satellite receiver may

be required).

3. You may be able to get HD signals using

an off-air antenna. To see if you can

receive off-air HD signals, and for help

choosing the right antenna, visit

www.antennaweb.org

HIGH DEFINITION

HOME THEATER

VIZIO Blu-ray ™

Bring your movies to life! 1080p Full HD playback delivers crystal clear images with lifelike detail and High

Definition Audio puts you in the center of the action. Visit www.VIZIO.com

for more details.

4

POWER THE TV

Just lightly touch the Power button on your HDTV to turn in on, or press the Power button on the remote control.

The touch-sensitive TV controls will then light up when your hand approaches the TV.

HIGH-DEFINITION SOUND

Complete your total Home Theatre experience with stunning audio from VIZIO accessories such as the Sound Bar with Wireless Subwoofer.

Visit www.VIZIO.com or call (888) 849.4623.

5

SETUP

(Cont.)

1. The Initial Setup menu should appear on-screen. Select your desired

language

(see Fig. 1)

.

2. Follow the menu instruction using your remote control to initialize the

process. Choose Home Mode for optimal energy savings.

IF YOU’RE CONNECTING USEING A CABLE OR

SATELLITE BOX:

1. Exit the Setup Wizard.

2. Select your input source to match the device you’re connecting to.

3. You’re done! Enjoy the show.

IF YOU’RE CONNECTING USING A CABLE FROM

THE WALL OR ANTENNA:

1. Choose between Antenna or Cable to match your input source (see Fig. 2) .

2. Begin the scan for channels (see Fig. 3) .

Note: Your Service Provider may provide access to HD channels during the channel scan.

Please be patient and wait for 100% completion.

3. Once the scan is complete, follow the on-screen instruction to exit the

Initial Setup menu (see Fig. 4) .

M160MV

LED LCD HDTV QUICKSTART GUIDE

HELP TOPICS

PROGRAM YOUR CABLE OR SATELLITE REMOTE

Call your Cable or Satellite provider to determine if you need a 3, 4 or 5-digit code. Refer to the following chart of VIZIO codes and follow your provider's instructions to program your Cable or Satellite remote.

3-DIGIT CODES SERVICE PROVIDER

CABLE

DIRECT TV

DISH NETWORK

5-DIGIT CODES

11758, 10178, 10128

11758, 10178, 10128

4-DIGIT CODES

1758, 0178, 0128

1758, 0178, 0128

627

EXTENDED

WARRANTIES

Protect your VIZIO product with up to 5 years of added repair service! Extended coverage begins when the manufacturer's warranty expires so you’ll receive maximum protection!

Visit us online at: www.VIZIO.com

or Call:

(888) 849. 4623

For more info on Extended Warranties

LEARN MORE

Refer to your User Manual for in-depth descriptions or more information.

REGISTER NOW

Register your product today and receive the latest VIZIO news and special offers.

www.VIZIO.com

PROBLEM SOLUTION

No Power

Picture is blurry or fuzzy/ image quality issues

Cannot change channels up and down with direct cable hookup from wall or antenna

Cannot return to the Setup Wizard

Screen is displaying blue/no signal and/or turning off after a few seconds

Panoramic mode is not available

Black or gray bars on top, bottom, and/or sides of picture

Make sure the power button is ON . Make sure the AC power cord is securely connected to the AC socket and try plugging the TV directly into the wall. Plug another electrical device (like a radio) to the outlet to verify the outlet is supplying power.

For the best image quality, view HD wide screen programs where possible. If HD content is not available, view Standard Definition from a digital source. Standard analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TVs, and thus you can see interference and deficiencies you did not know you had.

Press the MENU button. Use the arrows to navigate to the TV TUNER MENU. Highlight the first option, called Tuner Mode. Select the appropriate input by using the left and right arrows. Once Tuner Mode is correct, highlight "AutoSearch", then press the right arrow.

The Setup Wizard is no longer accessible after being run once, but all of the same settings can still be changed. Press the MENU button to access them. For channel scan, see the above topic.

Your TV may be on an inactive input. After powering on the TV, press the INPUT button on your remote repeatedly until a picture re-appears. If this does not work, try it a second time but press the button slower this time; it can take as long as 30 seconds for the image to reappear.

When the TV displays an HD resolution the Panoramic viewing mode will not be available.

Try setting your TV to wide or zoom mode; the image should fill the screen. If you still see bars, they are part of the image the TV is receiving. Cable and satellite boxes may add black bars to the picture, especially when HDMI cables are used. For more information, please contact your service provider.