User’s Guide
For LS1000
10.4” Digital Photo Frame
with Slideshow
Warning
Use only the power adapter supplied with your product.
Welcome...
to your new Motorola Digital Photo Frame!
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will
need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty
coverage.
For product-related questions, please call:
1-888-331-3383 in US and Canada
0845 218 0890 in UK
(65) 68412668 in Singapore
On the Web: www.motorola.com
This User’s Guide provides you with all the information you need to get the most from your digital photo frame.
Before you start using, you will need to set up your digital photo frame. Follow the simple instructions in
“Getting started”, on the next few pages.
IMPORTANT
Only use the supplied power adapter.
Got everything?
1 x Digital Photo Frame
1 x Stand
1 x Power adapter
1 x Remote control
1 x Quick Start Guide
1 x User’s Guide
Key features
3 view modes: Clock/Calendar mode, slideshow mode and
thumbnail mode
5 slideshow transition effects
Date and Time settings
Programmable On/Off Time
Supports flash drive, SD, SDHC and MMC memory cards.
Frame Overview
1.
2.
3.
4.
5.
6.
7.
8.
Navigation and
buttons
EXIT button
ON/OFF button
Hanging slot (Portrait position)
Hanging slot (Landscape position)
Stand locking slot
Loudspeakers
Earphone jack
for connecting to an earphone/headset or external
speaker to play the audio.
9. USB port
for inserting a USB flash drive that contains the
photos or music you want to play.
10. Memory card slot
for inserting an SD, SDHC, MMC memory card
that contains the photos or music you want to play.
11. Power jack
Getting started
3
Table of Contents
1.
2.
3.
4.
5.
6.
4
Getting started ................................................................................5
1.1
Installing the stand ..........................................................6
1.1.1
Landscape position ..............................................6
1.1.2
Portrait position ....................................................7
1.2
Connecting to power .......................................................8
1.3
Inserting a memory card or a USB flash drive .................8
1.4
Replacing the remote control battery...............................9
Using the photo frame..................................................................10
2.1
Using the control buttons ..............................................10
2.2
Using the remote control ...............................................13
Using the menus...........................................................................15
3.1
Using the Main Menu ....................................................15
3.2
Using the Photo menu...................................................16
3.2.1
Copying one or all photos ...................................17
3.2.2
Deleting one or all photos ...................................18
3.2.3
Auto rotation.......................................................18
3.3
Using the Music menu...................................................19
3.3.1
Copying one or all music files .............................20
3.3.2
Deleting one or all music files .............................21
3.4
Using the Calendar menu .............................................21
3.5
Using the Settings menu ...............................................22
3.5.1
Setting an alarm .........................................25
3.5.2
Enabling auto on/off....................................26
General information .....................................................................27
Technical specifications ..............................................................33
Wall mounting instructions..........................................................35
Getting started
1. Getting started
Care and maintenance
WARNING
Wipe the frame and the LCD screen gently with a soft, clean,
dry cloth.
Do not place your digital photo frame in the bathroom or
other humid areas.
Do not place your digital photo frame near sources of
heat and extreme temperatures, such as fluorescent
lighting, microwave ovens, heating appliances and direct
sunlight.
Do not disassemble your digital photo frame; there are no
user-serviceable parts inside.
If the LCD screen breaks, do not touch the glass or liquid.
Contact Motorola customer support for assistance.
Use only the power adapter supplied with your digital
photo frame.
To remove fingerprints on the LCD screen, wipe gently with
a soft, lint-free cloth. Do not use cleaning solutions unless
they are designed specifically for LCD screens.
IMPORTANT
Always switch off and disconnect the power adapter before
cleaning the digital photo frame.
Compatible photo format
Your digital photo frame can only display photos that are in
JPEG format. Other photo formats may not be detected or
displayed correctly.
Getting started
5
1.1
Installing the stand
3.
Insert the stand into the stand locking slot as illustrated,
until the stand is secured to the photo frame.
1.1.1 Landscape position
To place the photo frame in landscape position, follow the
steps below to install the stand.
1.
2.
Hold the photo frame in landscape position.
Attach the stand to the stand locking slot on the back of
the photo frame.
WARNING
Do not rotate the stand during the installation. Otherwise,
the photo frame will be damaged.
Once the installation is complete, place the photo frame
on a stable surface to avoid any possible movement.
6
Getting started
1.1.2 Portrait position
To place the photo frame in portrait position, follow the steps
below to install the stand.
1.
2.
3.
Insert the stand into the stand locking slot as illustrated,
until the stand is secured to the photo frame.
Hold the photo frame in portrait position.
Attach the stand to the stand locking slot on the back of
the photo frame.
WARNING
Do not rotate the stand during the installation. Otherwise,
the photo frame will be damaged.
Once the installation is complete, place the photo frame
on a stable surface to avoid any possible movement.
Getting started
7
1.2
Connecting to power
Follow the steps below to connect the photo frame to a
power outlet to turn on the power.
1.
Plug one end of the AC power adapter to the power
jack on the back of the photo frame.
2.
Plug the other end into a power outlet. The power of
the photo frame will be turned on.
1.3 Inserting a memory card
or a USB flash drive
The photo frame is preloaded with some photos in the
internal memory. On the top of the photo frame, you can
also insert a memory card or a USB flash drive containing
the content you want to show on this unit.
NOTE
3.
Place the photo frame in landscape or portrait position
on a stable surface.
After you insert a photo-loaded memory card or USB
flash drive and connect the photo frame to power, the
photo frame will automatically start to display photos in
slideshow mode.
The memory card slot and USB port both support
hot-swap function.
The memory card slot accepts these types of memory
cards: SD, SDHC, MMC.
You can play audio and image files on the photo frame.
The supported audio file format is MP3 (*.mp3). The
supported image file format is JPEG (*.jpg).
Video files are not supported on this photo frame.
NOTE
Available plug types may vary depending on where you
purchased this photo frame.
8
Getting started
1.4 Replacing the remote
control battery
3.
Insert the new battery into the battery holder. The
battery must be placed with the positive pole facing
upwards in the illustrated position.
4.
Slide the battery holder into the remote control.
The supplied remote control comes installed with a CR2025
lithium battery. When you need to replace the battery, follow
the steps below.
1.
Slide the locking tab to the right.
WARNING
2.
Pull out the battery holder.
Getting started
Protect the battery from overheating or excessive
moisture.
Failure to replace the battery in the correct manner may
result in damage to the battery.
Use only the approved specified batteries.
Properly recycle or dispose of used batteries according to
local guidelines and regulations.
Do not throw batteries into fire. This may result in an
explosion.
If the battery is completely drained or the remote control
is not in use for a long time, remove the battery to prevent
leakage.
9
2. Using the photo frame
No.
Description
1
Navigation and
buttons
To operate the photo frame, you can:
Use the control buttons on the back of the photo frame
Or
Use the supplied remote control
2.1 Using the control
buttons
a. UP/VOL : moves up/increases the volume.
b. DOWN/VOL!: moves down/decreases the
volume.
c. RIGHT: moves right.
d. LEFT: moves left.
e.
10
: Enters/confirms the selection, or
starts/pauses the playback.
2
EXIT button
Returns to the Main Menu.
Goes back to the previous page.
Stops the playback.
3
ON/OFF button
Turns on the screen backlight.
Turns off the screen backlight to enter Standby
mode.
Using the photo frame
When using the Main Menu
When playing a slideshow
Button
UP/VOL
Button
Function
Starts/pauses the playback.
EXIT
Goes back to the previous page.
DOWN/VOL!
LEFT
RIGHT
Function
Selects Internal Memory, USB or
Memory Card.
Selects Internal Memory, USB or
Memory Card.
Selects Photo, Music, Calendar or
Settings menu.
Selects Photo, Music, Calendar or
Settings menu.
Enters sub-pages of Photo, Music,
Calendar or Settings menu.
When browsing photos in thumbnail view
Button
UP/VOL
DOWN/VOL!
LEFT
RIGHT
EXIT
Function
Moves up.
Moves down.
Moves left.
Moves right.
Displays the currently selected
photo in Single Photo view.
Goes back to the previous page.
Using the photo frame
When using the Music menu
Before playing music / When music is paused
Button
Function
UP/VOL
Selects the previous track.
DOWN/VOL!
Selects the next track.
LEFT
Selects the previous track.
RIGHT
Selects the next track.
When playing music
Button
Function
UP/VOL
Increases the volume.
DOWN/VOL!
Decreases the volume.
LEFT
Selects the previous track.
RIGHT
Selects the next track.
11
When using the Calendar menu
When using the Settings menu
Button
LEFT
Button
UP/VOL
RIGHT
EXIT
Function
Selects Photo, Music, Calendar or
Settings menu.
Selects Photo, Music, Calendar or
Settings menu.
Enters Calendar full screen mode
when the Calendar menu is
selected.
Goes back to the previous page.
DOWN/VOL!
LEFT
RIGHT
EXIT
12
Function
Moves up to the previous sub-menu
in Settings.
Moves down to the next sub-menu
in Settings.
Selects Photo, Music, Calendar or
Settings menu.
Selects Photo, Music, Calendar or
Settings menu.
Enters sub-menus in Settings.
Enters/confirms the selection.
Quits sub-menus in Settings.
Goes back to the previous page.
Using the photo frame
2.2
Using the remote control
The following table describes the buttons and their functions
that are available on the supplied remote control.
No.
Description
1
ON/OFF
Turns on the screen backlight.
Turns off the screen backlight to enter Standby
mode.
MENU
You can press this button to activate or deactivate
Copy One, Copy All, Delete One or Delete All
options in Photo Viewer and Music Player.
UP/VOL
Moves up or increases the volume.
LEFT/PREVIOUS
Moves left or selects the previous item.
ROTATE
You can press this button repeatedly to rotate the
selected photo counterclockwise each time by 90
degrees.
DOWN/VOL!
Moves down or decreases the volume.
SETUP
You can press this button to access the Settings
menu.
2
3
4
5
6
7
(Continued on next page)
Using the photo frame
13
No.
Description
8
EXIT
Goes back to the previous page.
RIGHT/NEXT
Moves right or selects the next item.
9
10
11
14
(OK/PLAY/PAUSE)
Enters and confirms the selection, or starts/pauses
the playback.
ZOOM
Zooms in the photo by a factor of 2x, 4x, 8x and 16x.
Using the photo frame
3. Using the menus
3.1
To exit slideshow mode and return to the Main Menu, press
the EXIT button on the back of the photo frame.
Using the Main Menu
After turning on the power of the photo frame, photos will
play in slideshow mode automatically.
If a memory card has been inserted, photos in the card
will play in slideshow mode automatically.
If no memory card is inserted, photos in the built-in
memory will play in slideshow mode automatically.
NOTE
To check the available space in Internal Memory, USB or
Memory Card, select Internal Memory, USB or Memory
Card and check the amount of free space shown on the
bottom right corner.
In the Main Menu, you can:
Press the LEFT or RIGHT button to select the Photo,
Music, Calendar or Settings menu.
Press the UP/VOL
or DOWN/VOL! button to select a
device, including Internal Memory, USB or Memory
Card.
Using the menus
15
3.2
Using the Photo menu
NOTE
The photo frame only supports JPEG (*.jpg) image file
format.
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Photo menu.
2.
Press the UP/VOL
select a device.
3.
Press the
button to enter Photo Viewer, which
displays your photos in thumbnail view. In Photo
Viewer, both photos and folders may display,
depending on the content stored in your device.
or DOWN/VOL! button to
To browse or select a photo, use the UP/VOL
DOWN/VOL!, LEFT and RIGHT buttons.
,
To play photos in full screen single photo mode,
press the
button. Press the
button again
to start running slideshow.
To make photos play with background music in
slideshow mode, go to the Settings menu to set
Music slideshow to On. (This function is only
available when you have music files in the internal
memory or inserted memory card/USB flash drive.)
To switch to the previous or next photo in slideshow
mode, press the LEFT or RIGHT button.
To control the slideshow music volume, press the
or DOWN/VOL! button.
UP/VOL
To rotate a photo, press the ROTATE button on your
remote control.
To zoom in a photo, press the ZOOM button on your
remote control.
16
Using the menus
3.2.1 Copying one or all photos
2.
NOTE
1.
Press the LEFT or RIGHT button to select Copy One
or Copy All, and then press the
To copy photos from your memory card or USB to the
internal memory, please insert your memory card or USB
flash drive first.
Use the supplied remote control for this operation.
3.
In Photo Viewer, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
4.
button.
Press the LEFT or RIGHT button to select Yes, and
then press the
button.
Press the LEFT or RIGHT button to select the
destination (USB, Memory Card or Internal Memory),
and then press the
button to confirm.
Once the copy process starts, do not remove your USB
or memory card from the photo frame before the
“Complete” message appears.
Using the menus
17
3.2.2 Deleting one or all photos
3.2.3 Auto rotation
NOTE
The photo frame has a built-in tilt sensor that allows the
photo frame to determine its own orientation relative to
gravity and thereby automatically switch from displaying
photos in portrait view to displaying photos in landscape
view.
Use the supplied remote control for this operation.
1.
In Photo Viewer, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
2.
Press the LEFT or RIGHT button to select Delete One
or Delete All, and then press the
3.
Press the LEFT or RIGHT button to select Yes, and
then press the
18
button.
button to confirm.
Using the menus
3.3
Using the Music menu
NOTE
The photo frame only supports MP3 (*.mp3) audio file
format.
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Music menu.
2.
Press the UP/VOL
select a device.
3.
Press the
Using the menus
or DOWN/VOL! button to
To select the previous track, press the UP/VOL
or LEFT button.
To select the next track, press the DOWN/VOL! or
RIGHT button.
To play the selected track, press the
button.
During music playing, volume bar shows on top right
corner. To increase or decrease the volume, press
or DOWN/VOL! button.
the UP/VOL
button to enter Music Player.
19
3.3.1 Copying one or all music
files
NOTE
To copy music files from your memory card or USB to the
internal memory, please insert your memory card or USB
flash drive first.
Use the supplied remote control for this operation.
1.
In Music Player, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
2.
Press the LEFT or RIGHT button to select Copy One
or Copy All, and then press the
3.
Press the LEFT or RIGHT button to select Yes, and
then press the
4.
button.
button.
Press the LEFT or RIGHT button to select the
destination (USB, Memory Card or Internal Memory),
and then press the
button to confirm.
Once the copy process starts, do not remove your USB
or memory card from the photo frame before the
“Complete” message appears.
20
Using the menus
3.3.2 Deleting one or all music
files
2.
2.
Press the LEFT or RIGHT button to select Delete One
or Delete All, and then press the
3.
automatically starts.
button.
Press the LEFT or RIGHT button to select Yes, and
then press the
3.4
1.
button again to enter
full screen mode in the Calendar menu. The slideshow
Use the supplied remote control for this operation.
In Music Player, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
button to enter the Calendar preview
screen, and then press the
NOTE
1.
Press the
button to confirm.
Using the Calendar menu
In the Main Menu, press the LEFT or RIGHT button to
select the Calendar menu.
3.
In full screen calendar mode, you can press the
button to display one specific still photo or enter
slideshow mode. To switch to next or previous photo,
press the RIGHT or LEFT button.
NOTE
If you have set the alarm, an alarm icon will show on the
Calendar screen. For details about alarm settings, refer to
“3.5.1 Setting an alarm”.
Using the menus
21
3.5
Using the Settings menu
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
button to enter the Settings menu.
To move among sub-menus under Settings, press
or DOWN/VOL! button.
the UP/VOL
You can control all function settings of the photo frame from
the Settings menu. Refer to the table below for more
information.
Sub-menu
Option
Description/Function
Slideshow
frequency
5 seconds
10 seconds
30 seconds
1 minute
1 hour
1 day
No effect
Random
Fade out
Fade in
Left to Right
Horizontal
open
Horizontal
close
Selects the speed of
slideshow.
To apply the settings you have selected, press the
button.
To go back to the previous page, press the EXIT
button.
Transition
effect
Selects the transition effect
to be applied in slideshow.
(Continued on next page)
22
Using the menus
Sub-menu
Option
Description/Function
Date & Time
setting
Year
Month
Day
Hour
Minute
Time
Format
Alarm
on/off
Alarm hour
Alarm
minute
Volume
Allows you to set up the
date and time.
Alarm setting
Tone
Day
Using the menus
Activates/deactivates the
alarm clock function.
Sets the alarm hour.
Sets the alarm minute.
Sets the alarm volume
level.
Selects the type of alarm
tones: Beep or MP3
Allows you to set the alarm
recurring everyday or on
weekdays.
Languages
English
Français
Deutsch
Italiano
Español
Português
Nederlands
P !!"#$
Svenska
Dansk
Suomi
Norsk
Polski
Magyar
%&'()
Türkçe
*++,-./0
Selects an OSD
(On-screen display)
language.
(Continued on next page)
23
Sub-menu
Option
Description/Function
On/Off
schedule
Auto On/Off
Enables/disables the Auto
power on/power off options.
Powers on the photo frame
automatically according to
the time length you set.
Display
Photo view
options
Music
slideshow
Auto on
hour
Auto on
minute
Auto off
hour
Auto off
minute
Brightness
Contrast
Original
Fit to
screen
On
Off
24
Powers off the photo frame
automatically according to
the time length you set.
Sets the level of brightness.
Sets the level of contrast.
Displays photos in their
original aspect ratio.
Optimizes photos to fit the
whole screen.
Turns on background music
in slideshow mode.
Turns off background music
in slideshow mode.
Copy option
Original
size
Reduce
size
Default
settings
EXIT
OK
Clear internal
memory
EXIT
OK
Use the original file size
when copying photos or
music.
Use the reduced file size
when copying photos or
music.
Cancels the task.
Resets to system default
settings.
Cancels the task.
Formats the internal
memory.
WARNING:
This option will delete all
the photo and music files
stored on the internal
memory.
Using the menus
3.5.1 Setting an alarm
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
3.
Press the DOWN/VOL! button to select Alarm
button to enter the Settings menu.
setting, and then press the
button.
4.
Press the LEFT or RIGHT button to set the alarm to
On.
5.
Continue to adjust the alarm hour, minute, volume,
tone and Day.
NOTE
When the alarm goes on, you can press the EXIT button
to stop the alarm or press the
button to activate the
snooze function.
If you choose MP3 in the Tone option, music stored in the
built-in memory will be used as the alarm tone.
If no music file is available in the memory, Beep tone will
be used as the alarm tone.
In the Day option, you can select Everyday or
Weekday. When Everyday is selected, alarm repeats
everyday, including Saturday and Sunday. When
Weekday is selected, alarm repeats from Monday to
Friday.
6.
Press the EXIT button when finished.
Using the menus
25
3.5.2 Enabling auto on/off
The photo frame comes with the Programmable On/Off
Time feature, making it possible to power on and off
automatically according to the time you set.
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
3.
Press the DOWN/VOL! button to select On/Off
button to enter the Settings menu.
schedule, and then press the
button.
4.
Press the LEFT or RIGHT button to select On for the
Auto On/Off option.
5.
Continue to set the Auto On/Off time.
To move among entries, press the UP/VOL
DOWN/VOL! button.
or
To adjust the time, press the LEFT or RIGHT button.
6.
Press the EXIT button when finished.
NOTE
When the photo frame has been powered off automatically,
you can press any control buttons or any buttons on the
remote control to resume the system at any time. Once it
reaches the scheduled Off time, the photo frame will power
off automatically still.
26
Using the menus
4. General information
If your product is not working properly...
1.
Read this User’s Guide or the Quick Start Guide.
2.
Visit our website:
www.motorola.com
3.
Contact Customer Service:
•
•
•
1-888-331-3383 in US and Canada
0845 218 0890 in UK
(65) 68412668 in Singapore
Consumer Products and Accessories
purchased in the United States, Canada, UK
and Singapore.
What Does this Warranty Cover?
Subject to the exclusions and limitations contained below,
Binatone Electronics International LTD. warrants the
Motorola branded consumer products that it manufactures
(“Products”) and the Motorola branded or certified
accessories sold for use with these Products that it
manufactures (“Accessories”) to be free from defects in
materials and workmanship under normal consumer usage
for the period(s) outlined below. This limited warranty is a
consumer’s exclusive remedy, and only applies as follows to
new Motorola branded Products and Accessories
manufactured by Binatone Electronics International LTD.,
and purchased by consumers in the United States, Canada,
UK or Singapore, which are accompanied by this written
warranty:
Who is covered?
This warranty covers only the first consumer purchaser, and
is not transferable.
General information
27
What will BINATONE ELECTRONICS INTERNATIONAL
LTD. do?
BINATONE ELECTRONICS INTERNATIONAL LTD., at its
sole option, will at no charge repair, replace or refund the
purchase price of any Products or Accessories that does not
conform to this warranty. Binatone Electronics International
LTD. may use functionally equivalent reconditioned/
refurbished/ pre-owned or new Products, Accessories or
parts in such repair or replacement and any Products,
Accessories or parts removed or being replaced under this
warranty become the property of Binatone Electronics
International LTD.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES OR CONDITIONS
IRRESPECTIVE OF WHETHER THEY ARE IMPOSED BY
LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER
THIS EXPRESS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER, AND IS
PROVIDED IN LIEU OF ALL WARRANTIES AND
MOTOROLA AND BINATONE ELECTRONICS
INTERNATIONAL LTD. MAKES NO OTHER WARRANTIES
OR CONDITIONS, EXPRESS OF IMPLIED. IN NO EVENT
SHALL MOTOROLA OR BINATONE ELECTRONICS
28
INTERNATIONAL LTD. BE LIABLE, WHETHER UNDER
THIS LIMITED WARRANTY OR IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE OR STRICT PRODUCT
LIABILITY) OR OTHERWISE FOR DAMAGES OR CLAIMS
IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
OF ANY KIND, OR LOSS OF REVENUE, SAVINGS OR
PROFITS, LOSS OF BUSINESS, LOSS OF PROGRAMS
DATA INFORMATION (WHETHER CONFIDENTIAL
PROPRIETARY OR PERSONAL IN NATURE OR
OTHERWISE) OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE ABILITY OR
INABILITY TO USE THE PRODUCTS OR ACCESSORIES
AND BINATONE ELECTRONICS INTERNATIONAL LTD.
SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR
ANY CLAIMS OR DEMANDS MADE BY ANY THIRD
PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD
PARTY TO THE FULL EXTENT THESE DAMAGES OR
CLAIMS MAY BE DISCLAIMED BY LAW.
Some states, countries or jurisdictions do not allow the
limitation or exclusion of incidental or consequential
damages, or limitation on the length of an implied warranty,
so the above limitations or exclusions may not apply to you
in such states, countries or jurisdictions. This warranty gives
you specific legal rights, and you may also have other rights
that vary from state to state or from one country/jurisdiction
to another.
General information
Products or Accessories
Covered
Consumer Products
Consumer Accessories
Consumer Products and
Accessories that are
Repaired or Replaced
Length of Coverage
One (1) year from the date
of purchase by the first
consumer purchaser of the
product.
Ninety (90) days from the
date of purchase by the first
consumer purchaser of the
accessory.
The balance of the
original warranty or for
ninety (90) days from the
date returned to the
consumer, whichever is
longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are
excluded from coverage.
General information
Abuse & Misuse. Defects or damage that result from: (a)
improper or unreasonable use, operation, storage, misuse
or abuse, accident or neglect or other external cause, such
as physical damage (cracks, scratches, etc.) to the surface
of the product resulting from misuse; (b) your failure to
follow or operation outside the usage parameters stated in
the user instructions that came with the Products or
Accessories; (c) contact with liquid, water, rain, extreme
humidity or heavy perspiration, sand, dirt or the like,
extreme heat, or food; (d) use of the Products or
Accessories for commercial purposes or subjecting the
Product or Accessory to abnormal usage or conditions; or (e)
other acts or omissions which are not the fault or neglect of
Motorola or Binatone Electronics International LTD., are
excluded from coverage.
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result from the use of
Non-Motorola branded or certified Products or Accessories
or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in any
way by someone other than Motorola, Binatone Electronics
International LTD. or its authorized service centers, are
excluded from coverage.
29
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts,
are excluded from coverage.
Communication Services. Defects, damages, or the
failure of Products or Accessories due to any
communication service or signal you may subscribe to or
use with the Products or Accessories is excluded from
coverage.
These terms and conditions constitute the complete
warranty agreement between you and BINATONE
ELECTRONICS INTERNATIONAL LTD. regarding the
Products or Accessories purchased by you, and supersede
any prior agreement or representations, including
representations made in any literature publications or
promotional materials issued by BINATONE
ELECTRONICS INTERNATIONAL LTD. or representations
made by any agent employee or staff of BINATONE
ELECTRONICS INTERNATIONAL LTD., that may have
been made in connection with the said purchase.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
• 1-888-331-3383 in US and Canada
• 0845 218 0890 in UK
• (65) 68412668 in Singapore
You will receive instructions on how to ship the Products or
Accessories, the shipment of which shall be at your own risk
and expense, to a BINATONE ELECTRONICS
INTERNATIONAL LTD. Authorized Repair Center. To obtain
service, you must include: (a) a copy of your receipt, bill of
sale or other comparable proof of purchase of the Products
or Accessories showing the date of purchase; (b) a written
description of the problem; and, most importantly; (c) your
address and telephone number.
30
General information
Compliance Information
Declaration of Conformity
This product is in compliance with the essential
requirements and other relevant provisions of Directive
2004/108/EC:
European Standard EN55022:2006 Class B,
EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005
and EN55024:1998/A1:2001/A2:2003
(IEC 61000-4-2:Edition 1.2:2001-04,
IEC 61000-4-3:Edition 2.1:2002-09,
IEC 61000-4-4:Second edition:2004-07,
IEC 61000-4-5:Edition 1.1:2001-04,
IEC 61000-4-6:Edition 2.1:2004-11,
IEC 61000-4-8:Edition 1.1:2001-03,
IEC 61000-4-11:Second Edition:2004-03)
and Australian Standard AS/NZS CISPR 22:2006 Class
B.
General information
FCC Statement
This device complies with Part 15 Subpart B of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
Subpart B of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
31
WARNING
You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
FCC and Industry Canada
This device complies with Industry Canada and FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Canadian DOC statement
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
WEEE Directive
Produced after 13 August 2005. Waste electrical
should not be disposed of with household waste.
Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
32
General information
5. Technical specifications
Screen size
10.4” diagonal TFT LCD
NOTE
Aspect ratio
4:3
Specifications are subject to change without prior notice.
Panel resolution
800 (H) x 600 (V) pixels
Internal memory size
512MB
Brightness
300 cd/m
Contrast ratio
500:1
Viewing angle in landscape
and portrait positions
(Top/Bottom/Left/Right)
50° / 60° / 75° / 75°
Supported memory card
types
SD, SDHC, MMC
USB Host
Supported
Loudspeakers
0.5W x 2
Power adapter
2
AC input: 100-240V;
50/60 Hz; 0.6A
DC output: 9.0V, 2A
Supported image file format
JPEG (*.jpg)
Supported audio file format
MP3 (*.mp3)
Auto rotation
Built-in tilt sensor
Technical specifications
33
34
Technical specifications
6. Wall mounting instructions
2.
Insert 8mm and 9.5mm head screws (to be purchased
separately) into the holes and tighten the screws. Then, align
your photo frame with the screws.
3.
Mount your photo frame in landscape position on the wall.
Landscape wall mounting
1.
Cut the illustration below and drill holes in the wall exactly as
illustrated.
Wall mounting instructions
35
36
Wall mounting instructions
Portrait wall mounting
1.
Drill a hole in the wall and insert an 8mm head screw (to be
purchased separately) into the hole.
2.
Align your photo frame with the screw.
Wall mounting instructions
3.
Mount your photo frame in portrait position on the wall.
37
38
Wall mounting instructions
Manufactured, distributed or sold by Binatone Electronics
International LTD., official licensee for this product.
MOTOROLA and the Stylized M Logo, and other Motorola
trademarks and trade dress are owned by Motorola, Inc. and
are used under license from Motorola, Inc. MOTOROLA and
the Stylized M Logo are registered in the US Patent &
Trademark Office. All other product or service names are the
property of their respective owners.
© Motorola, Inc. 2009. All rights reserved.
Version 1.0
Printed in China