Samsung VAC-9049B Specifications

157
FIBER
SENSORS
Digital Fiber Sensor
FX-100 SERIES
Related Information
■■General terms and conditions............ F-17
■■Glossary of terms / General precautions........ P.1359~ / P.1405
■■Sensor selection guide....................... P.3~
■■Fiber selection.................................... P.5~
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
Conforming to
EMC Directive
Listing
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
FX-100 series has been modificated
from July 2011 production. The color
of enclosure has been changed from
white to dark gray and the protection
cover has been attached.
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
PNP output
type available
Timer
Automatic
sensitivity setting
Test input
Interference Light intensity
monitor
prevention
WIRE-SAVING
SYSTEMS
panasonic-electric-works.net/sunx
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
Taking fiber sensors to the next level
Setup is made simple, using a dual digital display
The dual digital display allows users to check both
the threshold value and incident light intensity at the
same time, allowing for clear and intuitive control of the
sensor’s functions.
Threshold value
Incident light intensity
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Selection
Guide
Fibers
Amplifiers
FX-500
Commercially-available connectors are used so that lead time and spare part numbers
can both be reduced
The connectors used are commercially-available connectors,
so that processing costs and lead time required for carrying
out processing after purchase of the sensors can be greatly
reduced. The same connection parts as the DP-100 series
of digital pressure sensors and the PM-64 series of micro
photoelectric sensors can be used.
Commercially-available press-fit connectors are used, so that
the processing costs for connection cables can be greatly reduced.
Conventional (cable type)
FX-100
FX-311
FX-301-F7/
FX-301-F
Conventional lead time
● Harness processing by outside order is needed after sensor preparation.
FX-300
FX-410
Commercially-available
connector
Customer Sensor preparation
Sensor purchase and preparation
Harness processing by outside order
Sensor installation
Harness
processor
From now on (built-in connector type)
Sensor installation
Harness processing
Lead time from now on
● Harness processing can be done by outside order at the
same time of sensor preparation. No need junction connector.
Customer Sensor preparation
Sensor installation
Sensor purchase and preparation
Harness processing by outside order
Sensor installation
Harness
processor
Using cables with connectors
Harness processing
Lead time further reduced
● Harness processing by outside order is not needed.
Lead time and spare part numbers can be reduced.
Purchase of sensors and cable with connectors
Sensor installation
Reduced
Customer Sensor preparation Sensor installation
Reduced
Reduced
lead time
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
FX-100 SERIES
Saving-space with a width of 9 mm 0.354 in
Improved stability over both long terms
Very slim at only 9 mm 0.354 in. This is much thinner
than existing fiber sensors. Even if the difference is small
when only using one unit, when using many units this
makes a very large difference.
Utilizes the standard Panasonic Electric Works SUNX
digital fiber sensor element “Four-chemical emitting
element” for light emission. The light emission is
guaranteed to be stable over long periods of time.
[Stable sensing comparison]
Light-emitting
amount
9 mm
0.354 in
FX-100
Three-chemical
emitting element
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Time
Simple operation due to clear operation system
We are using the operation system of digital pressure sensor DP-100, which has been highly praised since it went
on sale. We have separated the settings levels into three levels: RUN mode, SET mode, and PRO mode, making
operation simpler and easier.
Functions used during normal operation
RUN mode
• Changing threshold values • Key lock
• Quick settings • Code settings
Functions used when initializing
the sensor and carrying out maintenance
SET mode
• Teaching • L-ON / D-ON setting
• Timer setting • Attenuation function
• Interference prevention function
Equipped with a full complement
of digital fiber sensor functions
PRO mode
• Shift • External input • Reset
• GETA • ECO • Display reversing
• Surplus value display • Copy
• Threshold tracking
Special and detailed setting
FIBER
SENSORS
LIGHT
CURTAINS
Long-term
stability
Simple setting
158
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
Quick code input function
Simply imputing the default setting “Code (number)”
will enable sensor settings. Even if the settings are
accidentally changed, imputing the code will restore the
default settings.
Confirmation can be carried out smoothly via telephone
by simply quoting numbers. This can be of great
assistance when dealing with foreign country customers.
RUN mode
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Quick setting: Press
and
simultaneously for 2 sec.
Code setting: Press
and
simultaneously for 4 sec.
Selection
Guide
Fibers
Amplifiers
Quick setting numbers (summary)
No
Output
operation
Timer
Light-emitting
amount selection
Dark-ON
None
OFF
Dark-ON
None
ON
Dark-ON
OFF-delay 10 ms
OFF
Dark-ON
OFF-delay 10 ms
ON
Light-ON
ON-delay 40 ms
ON
Light-ON
ON-delay 40 ms
OFF
Light-ON
ON-delay 10 ms
ON
Light-ON
ON-delay 10 ms
OFF
Refer to “Quick setting function” and “Code setting function”
in “PRECAUTIONS FOR PROPER USE” for details.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
FX-500
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
159
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
Digital Fiber Sensor
FX-100 SERIES
Teaching using ON / OFF buttons SET mode
Simply press the ON button when an object is present
and OFF when it is not. There is no need to switch
settings or make judgments between Light-ON (
)
and Dark-ON (
).
<Setting example>
Thru-beam type / Retroreflective type
AREA
SENSORS
Resolves variation in incident light intensity display
PRO mode
GETA function
Even when performing the same sensing operation,
there may be variances in the digital values of the fiber
amp. There is no problem with the sensor itself, but the
operator may find it troubling.
Given value can be corrected with the GETA function, so
the apparent variation can be eliminated and the creation
of operation manuals can proceed smoothly.
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Variations in the amount of light received
Object present ON
Object absent OFF
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
Reflective type
Unify at 500 using
the GETA function
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
Object present ON
Object absent OFF
STATIC CONTROL
DEVICES
ENDOSCOPE
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
Teaching is possible even without work.
Limit teaching function
This carries out teaching and sets threshold values only
when no object is present (when the incident light amount
is stable). This is useful when sensing objects if there
are other objects in the background and when sensing
minute objects. Teaching can also be carried out using
external input.
4,000
[digits]
4,000
[digits]
500
current value
0
Not
displayed
MACHINE VISION
SYSTEMS
Fibers
Amplifiers
FX-500
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
PRO mode
This function seeks changes in the light emitting amount
resulting from changes in the environment over long
periods (such as dust levels), so that the incident light
intensity can be checked at desired intervals and the
threshold values can be reset automatically. Reduces
the number of man-hours needed for maintenance.
* Becomes active when the
output operation is set
to on, the beams are not
received, and when using
semi-transparent or mirrored
reflective cable.
Current value
The amount of light
received when there
is no object
500
0
If the light receiving level becomes saturated when
sensing over short distances or when sensing
transparent objects or minute objects, the light emitting
amount can be reduced so that stable sensing can be
provided without needing to change the response time.
On previous models, there was only one light reduction
level, but now there are 3 levels plus an automatic mode.
As before, even when the fiber and distance settings
needed to be altered for proper sensing, this function can
allow simple settings alterations.
【Light receiving level saturated】
Threshold value
Actual digit difference: C
A
Upper display limit
4000
Time
Because the original
value is 500, the
displays for the lower
limit value will be 500
and the upper limit
value will be 4,000.
Stable detection of minute objects or transparent objects
SET mode
Attenuation function Light emitting
amount changed
B
Incident light
intensity
Selection
Guide
Save maintenance time
Threshold tracking function
Incident light intensity
UV CURING
SYSTEMS
’ to
1,000
Saturated digit
difference: D
【Stable sensing】
Incident light
intensity
PLC /
TERMINALS
Correcting an incident light intensity display of ‘
display as ‘
’
Incident light intensity
LASER
MARKERS
,
Actual digit difference: C
A
,
B
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
Interference prevention function SET mode
FX-101□: Interference prevention for up to 3 units
FX-102□: Interference prevention for up to 4 units
The emission frequencies can be set separately for
each unit in order to avoid interference. The emitted light
flashes while setting is in progress, so that you can see
at a glance which fiber sensor is currently being set.
There is no need to place the amplifiers close together
like there was before, and so the amplifiers can be set
up apart from each other.
* When the emission frequencies are changed, the response times will
also change.
FX-100 SERIES
Setting copy function to reduce man-hours
PRO mode
and human error By attaching a fiber sensor to each device that is to
be the fiber sensor master, the master sensor settings
can be copied along with data transmissions. By
synchronizing the settings on all the devices, trouble from
setting errors can be prevented, meaning fewer changes
to the instruction manuals even when equipment design
is changed.
<Wiring inset coping>
Master side
Color of lead wire of attached connector cable
(Brown) +V
(Black) Output
+
–
(White) External input
12 to 24 V DC
±10 %
(Blue) 0 V
(Black) Output
The emitted light and output indicator flash
at the same frequency.
Multi-function external input
PRO mode
Settings such as emission halt, limit / auto teaching,
2-point teaching and ECO settings can be carried out
via external input. Also, the threshold value can be
memorized.
Color of lead wire of attached connector cable
(Brown) +V
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
SENSOR
OPTIONS
(White) External input
SIMPLE
WIRE-SAVING
UNITS
(Blue) 0 V
Copiable setting
Threshold value, output operation setting, timer operation
setting, timer period setting, light-emitting amount
selection setting (attenuation function), shift setting, ECO
setting, digital display inversion setting, and threshold
value margin setting (alert function)
PLC etc,
Flexible mounting without bracket
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
LASER
MARKERS
(Blue) 0 V
External input lines are
equipped as standard
Digital display inversion setting PRO mode
You can choose either DIN rail mounting or mounting with
M3 screws through penetrating holes on the side of the
amplifier. When mounting directly or installing only one
amplifier or installing to a moving part, there is no slippage.
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
The viewing orientation of the digital display can be
inverted in accordance with the setting direction of the
amplifier.
Previous products
(without inversion function)
LASER
SENSORS
ENDOSCOPE
(Black) Output
(White) External input
FIBER
SENSORS
PARTICULAR
USE SENSORS
(Brown) +V
Slave side
160
FA COMPONENTS
MACHINE VISION
SYSTEMS
FX-100 SERIES
ø3.2 mm 0.126 inφ3.2mm取付穴
mounting holes
Turn OFF
UV CURING
SYSTEMS
Can be
attached with M3 screws.
M3ビスでの取り付けが可能。
Turn ON
Alert function
Use normal or long distance varieties
Selection
Guide
Response time and sensing range differ with standard or
long sensing range types.
Select the best type for your needs.
Amplifiers
PRO mode
When the amount light received approaches the
threshold value, the display can be made to blink in
order to alert the operator.
FX-500
Model No.
Incident light intensity
<When using at a shift amount of 20% and a threshold value of 1,000>
The amount of light received ranges from about 900 to 1,100
when the digital indicator flashes.
Range of the digital indicator flashing
(margin: small)
1,100 approx.
900 approx.
Threshold value
of 1,000
Fibers
Type
Sensing range
Response time
FX-100
FX-101
Standard type
400 mm 15.748 in Fastest 250 μs
FX-300
FX-102
Long sensing range type 1,150 mm 45.276 in Fastest 2.5 ms
FX-410
(FT-B8)
Electricity consumption saving
possibilities
FX-311
FX-301-F7/
FX-301-F
ECO
After setting, if about 20 seconds go by without any key
operations taking place the digital display will turn off
and energy consumption is kept under 600 mW. (When
illuminated it is under 720 mW)
The digital indicator flashes.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
161
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
Digital Fiber Sensor
FX-100 SERIES
ORDER GUIDE
Amplifiers
Type
Appearance
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
Standard type
AREA
SENSORS
Cable set
(Note 1)
INDUCTIVE
PROXIMITY
SENSORS
M8 plug-in
connector
type
M8 plug-in
connector
type
MICRO
PHOTOELECTRIC
SENSORS
PARTICULAR
USE
SENSORS
Accessory
Emitting
element
Model No.
Output
FX-101 (Note 2)
NPN open-collector
transistor
FX-101-Z (Note 3)
NPN open-collector
transistor
FX-101P (Note 2)
PNP open-collector
transistor
FX-101P-Z (Note 3)
PNP open-collector
transistor
FX-101-CC2
NPN open-collector
transistor
FX-101P-CC2
PNP open-collector
collector transistor
Red LED
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
M8 plug-in
connector
type
M8 plug-in
connector
type
WIRE-SAVING
SYSTEMS
Cable set
(Note 1)
SIMPLE
WIRE-SAVING
UNITS
Long sensing range type
SENSOR
OPTIONS
FX-102 (Note 2)
NPN open-collector
transistor
FX-102-Z (Note 3)
NPN open-collector
transistor
FX-102P (Note 2)
PNP open-collector
transistor
FX-102P-Z (Note 3)
PNP open-collector
transistor
FX-102-CC2
NPN open-collector
transistor
FX-102P-CC2
PNP open-collector
transistor
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
M8 connector attached cable
Designation
Model No.
CN-14A-C1
Connector
attached cable
Connector
attached cable
(Flexible type)
Description
CN-14A-C3
3 m 9.843 ft
CN-14A-C5
5 m 16.404 ft
CN-14A-R-C1
1 m 3.281 ft
CN-14A-R-C2
2 m 6.562 ft
CN-14A-R-C3
3 m 9.843 ft
0.02 mm2 4-core cabtyre cable with connector
on one end
Cable outer diameter: ø3.7 mm ø0.146 in
5 m 16.404 ft
2 m 6.562 ft
CN-24A-C5
5 m 16.404 ft
FX-500
Connector
CN-14A
Set of 10 housings and 40 contacts
FX-100
Amplifier
MS-DIN-4
mounting bracket
MS-DIN-E
Two pcs. per set
ø9
ø0.354
M8 connector
attached cable
CN-24A-C□
Fixing ring
CN-24A-C2
End plates
ø4
ø0.157
CN-14A-C2 (Note 1) 2 m 6.562 ft
CN-14A-R-C5
FX-300
• CN-24A-C□
31.4
1.236
1 m 3.281 ft
M8 connector
attached cable
FX-410
• FC-FX-1 (Protection cover)
OPTIONS
Fibers
Amplifiers
*Only include cable set type
Notes: 1) The connector attached cable CN-14A-C2 is supplied with the amplifier.
2) Make sure to use the optional connector attached cable CN-14A(-R)-C□ or the connector CN-14A, or a connector manufactured by J.S.T. Mfg. Co., Ltd.
(contact: SPHD-001T-P0.5, housing: PAP-04V-S)
3) Make sure to use the optional M8 connector attached cable CN-24A-C□.
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
• CN-14A-C2
Connector attached
cable 2 m 6.562 ft
For M8 plug-in connector type
The connector on one end
Cable outer diameter: ø4 mm ø0.157 in
Amplifier mounting
bracket
• MS-DIN-4
Mounting bracket for amplifier
When it moves depending on the way it is installed on a DIN rail,
these end plates ensure that all amplifiers are mounted together
in a secure and fully connected manner.
FX-311
FX-301-F7/
FX-301-F
Copy unit (Note 2) SC-SU1
Copy the controller settings to other controllers.
Notes: 1) The connector attached cable CN-14A-C2 is supplied with the cable set type FX-10□-CC2.
2) Refer to the copy unit SC-SU1 pages for details.
Connector
attached cable
• CN-14A(-R)-C□
Recommended connector
Contact: SPHD-001T-P0.5, Housing: PAP-04V-S (Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Connector
• CN-14A
Contact
Recommended crimping tool
Model No.: YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Housing
Digital Fiber Sensor
FX-100 SERIES
LIST OF FIBERS
FIBER
SENSORS
Thru-beam type (one pair set)
LASER
SENSORS
Fibers are listed in alphabetic order. Refer to p.5~ “Fiber Selection” for details of each fiber.
Model No.
Sensing range (mm in) (Note 1)
Standard type FX-101□
Long sensing range type FX-102□
PHOTOELECTRIC
SENSORS
Type
Fiber cable
length
: Free-cut
Dimensions
2 m 6.562 ft
P.90
FT-30
135 5.315
400 15.748
Super quality, ø0.5 mm ø0.020 in, Flexible
FT-31
130 5.118
340 13.386
M3, Flexible
FT-40
320 12.598
870 34.252
Super quality, ø1 mm ø0.039 in,
Flexible
FT-41
300 11.811
800 31.496
Metal-free
P.90
FT-42
300 11.811
800 31.496
M4, Flexible
P.90
FT-A8
1,500 59.055
3,500 137.795 (Note 2)
3,500 137.795 (Note 2)
3,500 137.795 (Note 2)
280 11.024
720 28.346
240 9.449
670 26.378
400 15.748
1,150 45.276
FT-A30
FT-AFM2
FT-AFM2E
FT-B8
2 m 6.562 ft
2 m 6.562 ft
P.90
P.90
Wide beam
2 m 6.562 ft
P.90
P.90
Array
P.90
M4
P.90
FT-E12
6 0.236
19 0.748
Ultra-small dia.
6 0.236
19 0.748
Ultra-small dia., Flexible
FT-E22
15 0.591
60 2.362
Ultra-small dia.
FT-E23
22 0.866
80 3.150
Ultra-small dia., Flexible
FT-FM2
300 11.811
800 31.496
FT-FM2S
300 11.811
800 31.496
FT-FM2S4
300 11.811
800 31.496
FT-FM10L
9,300 366.142
15,000 590.551
M14, Long sensing range
10 m 32.81 ft
P.91
250 9.843
700 27.559
Heat-resistant, 130 °C 266 °F
2 m 6.562 ft
P.91
200 mm 7.874 in (Note 4)
P.92
Heat-resistant, Joint
200 °C 392 °F
300 mm 11.811 in (Note 4)
P.92
500 mm 19.685 in (Note 4)
P.92
1 m 3.281 ft
P.92
500 mm19.685 in (Note 4)
P.92
800 mm 31.496 in (Note 4)
P.92
135 5.315
420 16.535
135 5.315
420 16.535
FT-H20-J50-S (Note 3)
135 5.315
420 16.535
FT-H20-M1
210 8.268
540 21.260
Heat-resistant, 200 °C 392 °F
FT-H20-VJ50-S (Note 3)
150 5.906
500 19.685
FT-H20-VJ80-S (Note 3)
150 5.906
500 19.685
Heat-resistant,
Joint 200 °C 392 °F
Side-view
FT-H20W-M1
100 3.937
300 11.811
Heat-resistant, 200 °C 392 °F
FT-H30-M1V-S (Note 5)
110 4.331
280 11.024
Vacuum-resistant, Heat-resistant
FT-H35-M2
170 6.693
490 19.291
Heat-resistant, 350 °C 662 °F
170 6.693
490 19.291
990 38.976
2,340 92.126
Chemical-resistant, Heat-resistant
1,000 39.370
3,000 118.110
Narrow beam
FT-KV1
135 5.315
500 19.685
FT-KV8
1,000 39.370
3,000 118.110
FT-L80Y
1,100 43.307
2,600 102.362
FT-NFM2
130 5.118
280 11.024
FT-NFM2S
130 5.118
280 11.024
FT-NFM2S4
130 5.118
280 11.024
FT-P2
120 4.724
330 12.992
ø1.5 mm ø0.059 in, Flexible
M3, Flexible
FT-K8
1 m 3.281 ft
1 m 3.281 ft
Sleeve
P.91
P.91
P.91
P.91
P.91
2 m 6.562 ft
M4, Sleeve
FT-H20-J20-S (Note 3)
FT-H35-M2S6
1 m 3.281 ft
M4
FT-H20-J30-S (Note 3)
FT-HL80Y
500 mm 19.685 in
P.91
P.91
1 m 3.281 ft
2 m 6.562 ft
2 m 6.562 ft (Note 6)
P.92
P.92
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
P.92
P.92
P.92
P.93
2 m 6.562 ft
P.93
2 m 6.562 ft (Note 6)
P.93
Side-view
MICRO
PHOTOELECTRIC
SENSORS
P.90
FT-E13
FT-H13-FM2
162
Selection
Guide
Fibers
Amplifiers
P.93
FX-500
FT-P40
80 3.150
240 9.449
FT-P60
130 5.118
300 11.811
FT-P80
230 9.055
650 25.591
260 10.236
800 31.496
FT-P81X
Chemical-resistant
M3
P.93
2 m 6.562 ft
M3, Sleeve
P.93
1 m 3.281 ft
P.93
P.93
2 m 6.562 ft
M4, Flexible
M4, Tough flexible
P.93
P.93
P.93
1 m 3.281 ft
Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
2) The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long.
3) Heat-resistant joint fibers and ordinary-temperature fibers (FT-FM2) are sold as a set.
4) This is the fiber length (fixed length) for heat-resistant fibers. The ordinary-temperature fibers are free-cut to 2 m 6.562 ft.
5) Sold as a set comprising vacuum type fiber + photo-terminal (FV-BR1) + fiber at atmospheric side (FT-J8).
6) The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
P.94
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
163
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Fibers
Amplifiers
Digital Fiber Sensor
FX-100 SERIES
LIST OF FIBERS
Thru-beam type (one pair set)
Fibers are listed in alphabetic order. Refer to p.5~ “Fiber Selection” for details of each fiber.
Model No.
Sensing range (mm in) (Note 1)
Standard type FX-101□
Long sensing range type FX-102□
Type
Fiber cable
length
: Free-cut
Dimensions
ø1 mm ø0.039 in, Flexible
500 mm 19.685 in
P.93
FT-PS1
40 1.575
90 3.543
FT-R80
180 7.087
430 16.929
M4, Elbow
FT-S20
135 5.315
400 15.748
Super quality, ø0.5 mm
ø0.020 in, Flexible
FT-S21
130 5.118
340 13.386
ø1.5 mm ø0.059 in, Flexible
FT-S30
320 12.598
870 34.252
Super quality, ø1 mm
ø0.039 in, Flexible
FT-SFM2
300 11.811
800 31.496
ø2.5 mm ø0.098 in
FT-SFM2L
760 29.921
2,400 94.488
ø2.5 mm ø0.098 in,
Long sensing range
2 m 6.562 ft
2 m 6.562 ft
2 m 6.562 ft
2 m 6.562 ft
P.94
P.94
P.94
P.94
P.94
P.94
2 m 6.562 ft
FT-SFM2SV2
180 7.087
470 18.504
Side-view
FT-SNFM2
130 5.118
280 11.024
ø1.5 mm ø0.059 in
P.95
FT-T80
300 11.811
800 31.496
M3
P.95
FT-V10
1,000 39.370
2,350 92.520
FT-V22
140 5.512
380 14.961
FT-V41
FT-V80Y
2 m 6.562 ft
Side-view
40 1.575
120 4.724
340 13.386
800 31.496
Chemical-resistant, Side-view
1 m 3.281 ft
P.94
P.95
P.95
2 m 6.562 ft
P.95
2 m 6.562 ft (Note 3)
P.95
FT-W4
80 3.150
220 8.661
M3, Sharp bending
P.95
FT-W8
260 10.236
650 25.591
M4, Sharp bending
P.95
FT-WA8
1,500 59.055
3,500 137.795 (Note 2)
FT-WA30
3,500 137.795 (Note 2)
3,500 137.795 (Note 2)
FT-WKV8
700 27.559
2,200 86.614
FT-WR80
215 8.465
570 22.441
430 16.929
1,150 45.276
FT-WR80L
FT-WS3
150 5.906
600 23.622
FT-WS4
80 3.150
220 8.661
FT-WS8
260 10.236
650 25.591
FT-WS8L
600 23.622
1,500 59.055
FT-WV42
30 1.181
80 3.150
230 9.055
670 26.378
80 3.150
230 9.055
330 12.992
1,000 39.370
FT-WZ4
FT-WZ4HB
FT-WZ7
FT-WZ7HB
P.95
Narrow beam, Sharp bending
P.96
M4, Square head,
Sharp bending
P.96
2 m 6.562 ft
ø3 mm ø0.118 in,
Sharp bending
ø1.5 mm ø0.059 in,
Sharp bending
ø2.5 mm ø0.098 in,
Sharp bending
ø3 mm ø0.118 in,
Sharp bending
P.96
P.96
P.96
P.96
P.96
Side-view, Sharp bending
P.96
1 m 3.281 ft
P.96
P.97
P.97
Rectangular, Compact,
Sharp bending
190 7.480
580 22.835
330 12.992
950 37.402
P.97
700 27.559
2,100 82.677
P.97
1,200 47.244
2,800 110.236
FX-500
FT-WZ8
FX-100
FT-WZ8E
FX-300
FT-WZ8H
FX-410
FT-Z8
360 14.173
1,000 39.370
FX-311
FT-Z8E
800 31.496
1,850 72.835
FX-301-F7/
FX-301-F
FT-Z8H
1,400 55.118
3,100 122.047
FT-Z802Y
P.95
Wide beam
520 20.472
3,100 122.047
P.97
2 m 6.562 ft
P.97
P.97
Rectangular, Flexible
P.97
P.97
Chemical-resistant,
Rectangular
P.97
Notes: 1) Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
2) The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long.
3) The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
FX-100 SERIES
LIST OF FIBERS
FIBER
SENSORS
Retroreflective type
LASER
SENSORS
Fibers are listed in alphabetic order. Refer to p.5~ “Fiber Selection” for details of each fiber.
Model No.
Sensing range (mm in) (Note 1) (Note 2)
Standard type FX-101□
Long sensing range type FX-102□
Type
Fiber cable
length
: Free-cut
PHOTOELECTRIC
SENSORS
Dimensions
FR-KV1
15 to 200 0.591 to 7.874
15 to 360 0.591 to 14.173
Wafer mapping
P.98
FR-KZ21
20 to 200 0.787 to 7.874
20 to 200 0.787 to 7.874
Narrow beam, Top sensing
P.98
FR-KZ21E
20 to 200 0.787 to 7.874
20 to 200 0.787 to 7.874
Narrow beam,
Side sensing
100 to 550 3.937 to 21.654
100 to 830 3.937 to 32.677
Sharp bending
FR-WKZ11
164
2 m 6.562 in
P.98
P.98
Notes:1)Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. The sensing range of FR-WKZ11 is specified for the RF-13. The sensing range of FR-KZ21, FR-KZ21E is specified for the attached reflector RF-003.
The sensing range of FR-KV1 is specified for the attached reflector.
Refer to p.166 for sensing range when FR-WKZ11 is used in combination with a reflector (optional).
2)The sensing range of retroreflective type is the possible setting range for the attached reflector. The fiber can detect an object less than setting range for
the reflector. However, note that if there are any white or highly-reflective surfaces near the fiber head, reflected incident light may affect the fiber head.
If this occurs, adjust the threshold value of the amplifier unit before use.
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
Reflective type
SIMPLE
WIRE-SAVING
UNITS
Fibers are listed in alphabetic order. Refer to p.5~ “Fiber Selection” for details of each fiber.
WIRE-SAVING
SYSTEMS
Model No.
FD-30
FD-31
FD-40
FD-41
FD-60
FD-61
FD-A15
FD-AFM2
FD-AFM2E
FD-B8
FD-E12
FD-E22
FD-EG1
FD-EG2
FD-EG3
FD-EN500S1
FD-ENM1S1
FD-F4
FD-F41
FD-F41Y
Sensing range (mm in) (Note 1) (Note 2)
Standard type FX-101□
Long sensing range type FX-102□
45 1.772
155 6.102
35 1.378
140 5.512
45 1.772
155 6.102
35 1.378
140 5.512
140 5.512
420 16.535
120 4.724
410 16.142
125 4.921
250 9.843
105 4.134
285 11.220
85 3.346
245 9.646
170 6.693
440 17.323
3.5 0.138
13 0.512
16 0.630
45 1.772
18 0.709
50 1.969
10 0.394
30 1.181
7 0.276
22 0.866
1 0.039
4 0.157
15 0.591
48 1.890
Applicable pipe diameter: Outer dia. ø6 to ø26 mm ø0.236
to ø1.024 in transparent pipe
PFA (fluorine resin) or equivalently transparent pipe, wall
thickness 1 mm 0.039 in
Applicable pipe diameter: Outer dia. ø6 to ø26 mm ø0.236 to
ø1.024 in transparent pipe
PVC (vinyl chloride), fluorine resin, polycarbonate, acrylic, glass,
wall thickness 1 to 3 mm 0.039 to 0.118 in
ø4 mm ø0.157 in
Protective tube: Fluorine resin, length 500 mm 19.685 in (cuttable)
Liquid surface not contacted: Beam received,
Liquid surface contacted: Beam interrupted
FD-F8Y
FD-FA90
FD-FM2
Applicable pipe diameter: Outer dia. ø8 mm ø0.315 in or more transparent
pipe (When used with the tying bands: ø8 to ø80 mm ø0.315 to ø3.150 in)
[PFA (fluorine resin), including translucent]
Liquid absent: Beam received, Liquid present: Beam interrupted
100 3.937
410 16.142
Type
Super quality, M3, Flexible
M3, Flexible
Super quality, M4, Flexible
M4, Flexible
Super quality, M6, Flexible
M6, Flexible
Wide beam
Array, Top sensing
Array, Side sensing
M6
Ultra-small dia.
M3, High precision
M3, Sleeve
Fiber cable
length
: Free-cut
2 m 6.562 ft
2 m 6.562 ft
2 m 6.562 ft
2 m 6.562 ft
2 m 6.562 ft
Dimensions
2 m 6.562 ft
1 m 3.281 ft
500 mm 19.685 in
1 m 3.281 ft
P.99
P.99
P.99
P.99
P.99
P.99
P.99
P.99
P.99
P.99
P.100
P.100
P.100
P.100
P.100
P.100
P.100
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
P.100
Selection
Guide
Liquid sensing,
Mountable on pipe
Fibers
2 m 6.562 ft
P.100
Amplifiers
FX-500
Liquid/Liquid leak
sensing
P.101
FX-100
FX-300
Liquid sensing
2 m 6.562 ft (Note 3)
Liquid/Liquid leak
sensing
2 m 6.562 ft
M6
Notes:1)The standard sensing objects of the sensing ranges vary depending on the fibers.
2)
Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
3)The allowable cutting range is 1,000 mm 39.370 in from the end that the amplifier inserted.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
P.101
P.101
P.101
FX-410
FX-311
FX-301-F7/
FX-301-F
165
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
Digital Fiber Sensor
LIST OF FIBERS
Reflective type
Fibers are listed in alphabetic order. Refer to p.5~ “Fiber Selection” for details of each fiber.
Model No.
FD-FM2S
FD-FM2S4
FD-G4
FD-G6
FD-G6X
FD-G40
FD-G60
FD-H13-FM2
FD-H18-L31
FD-H20-21
FD-H20-M1
SIMPLE
WIRE-SAVING
UNITS
FD-H25-L43
FD-H25-L45
WIRE-SAVING
SYSTEMS
FD-H30-KZ1V-S (Note 4)
MEASUREMENT
SENSORS
FD-H30-L32
STATIC
CONTROL
DEVICES
ENDOSCOPE
FD-H30-L32V-S (Note 4)
FD-H35-20S
FD-H35-M2
FD-H35-M2S6
LASER
MARKERS
FD-HF40Y
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
FD-L4
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FD-L41
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Fibers
Amplifiers
FX-500
FX-100
FX-300
FX-410
FX-100 SERIES
FD-L43
FD-L44
FD-L44S
FD-L45
FD-L45A
FD-L46
FD-L47
FD-NFM2
FD-NFM2S
FD-NFM2S4
FD-P2
FD-P40
FD-P50
FD-P60
FD-P80
FD-P81X
FD-R80
Sensing range (mm in) (Note 1) (Note 2)
Standard type FX-101□
Long sensing range type FX-102□
100 3.937
345 13.583
100 3.937
345 13.583
50 1.969
120 4.724
50 1.969
120 4.724
45 1.772
160 6.299
50 1.969
120 4.724
100 3.937
410 16.142
100 3.937
280 11.024
0 to 10 0.000 to 0.394
90 3.543
120 4.724
0 to 25 0.000 to 0.984
280 11.024
300 11.811
4 to 16 0.157 to 0.630
4 to 23 0.157 to 0.906
7 to 35 0.276 to 1.378
7 to 38 0.276 to1.496
25 to 80 0.984 to 3.150
10 to 220 0.394 to 8.661
2 to 9 0.079 to 0.354
0 to 17 0.000 to 0.669
2.5 to 6.5 0.098 to 0.256
0 to 11 0.000 to 0.433
85 3.346
200 7.874
75 2.953
280 11.024
75 2.953
280 11.024
ø4 mm ø0.157 in
Protective tube: Fluorine resin, length 500 mm 19.685 in (cuttable)
Liquid surface not contacted: Beam received,
Liquid surface contacted: Beam interrupted
5 to 8 0.197 to 0.315
(Convergent point 6 0.236)
1 to 17 0.039 to 0.669
(Convergent point 6 0.236)
3 to 14 0.118 to 0.551
(Convergent point 8 0.315)
1.5 to 16 0.059 to 0.630
(Convergent point 8 0.315)
0 to 19 0.000 to 0.748
0 to 25 0.000 to 0.984
0 to 6 0.000 to 0.236
0 to 8 0.000 to 0.315
0 to 4.5 0.000 to 0.177
0 to 5.5 0.000 to 0.217
0 to 40 0.000 to 1.575
M6, Sleeve
M4, High precision
M3, High precision
Tough flexible
2 m 6.562 ft
1 m 3.281 ft (Note 3)
Metal-free
2 m 6.562 ft
Heat-resistant, 130 °C 266 °F
Heat-resistant, 180 °C 356 °F
Heat-resistant,
200 °C 392 °F
M4
M6
Heat-resistant,
Convergent reflective
Vacuum-resistant,
Heat-resistant
Heat-resistant, 300 °C 572 °F
Vacuum-resistant,
Convergent reflective
M4, Sleeve
Heat-resistant, 350 °C 662 °F
M6, Sleeve
1 m 3.281 ft
12 to 50 0.472 to 1.969
28 1.102
30 1.181
35 1.378
100 3.937
35 1.378
100 3.937
35 1.378
100 3.937
25 0.984
65 2.559
8 0.315
30 1.181
45 1.772
150 5.906
45 1.772
150 5.906
90 3.543
200 7.874
70 2.756
220 8.661
70 2.756
180 7.087
FD-S30
45 1.772
155 6.102
FD-S31
35 1.378
140 5.512
P.101
P.101
P.101
P.102
P.102
P.101
P.102
P.102
P.102
P.102
P.102
3 m 9.843 ft
1 m 3.281 ft
P.103
2 m 6.562 ft
P.103
3 m 9.843 ft
P.103
1 m 3.281 ft
P.104
P.104
P.104
2 m 6.562 ft
Liquid/Liquid leak
sensing
P.104
P.104
2 m 6.562 ft
P.104
1 m 3.281 ft
2 m 6.562 ft
P.104
P.104
P.104
P.104
P.105
P.105
P.105
P.105
P.105
P.105
P.105
P.105
P.105
P.105
P.105
P.106
P.106
2 m 6.562 ft
P.106
Convergent reflective
0 to 50 0.000 to 1.969
16 to 30 0.630 to 1.181
Dimensions
P.103
P.103
3 m 9.843 ft
10 to 33 0.394 to 1.299 (Note 5)
FX-311
FX-301-F7/
FX-301-F
Fiber cable
length
: Free-cut
Type
4 m 13.124 ft
3 m 9.843 ft
M4
2 m 6.562 ft
M4, Sleeve
ø1.5 mm ø0.059 in, Flexible
M3, Flexible
ø3 mm ø0.118 in, Flexible
M4, Flexible
M6, Flexible
M6, Tough flexible
M6, Elbow
Super quality, ø3 mm ø0.118 in,
Flexible
ø3 mm ø0.118 in,
Flexible
1 m 3.281 ft
2 m 6.562 ft
2 m 6.562 ft
P.106
Notes:1)The standard sensing objects of the sensing ranges vary depending on the fibers.
2)
Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
3) The allowable cutting range is 700 mm 27.559 in from the end that the amplifier inserted.
4) Sold as a set comprising vacuum type fiber + photo-terminal (FV-BR1) + fiber at atmospheric side (FT-J8).
5)
The sensing range is changed due to tilt of senseing object.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
FX-100 SERIES
LIST OF FIBERS
FIBER
SENSORS
Reflective type
LASER
SENSORS
Fibers are listed in alphabetic order. Refer to p.5~ “Fiber Selection” for details of each fiber.
Model No.
FD-S80
FD-SFM2SV2
FD-SNFM2
FD-T40
FD-T80
FD-V41
FD-W8
FD-W44
FD-WG4
166
Sensing range (mm in) (Note 1) (Note 2)
Standard type FX-101□
Long sensing range type FX-102□
100 3.937
345 13.583
30 1.181
90 3.543
35 1.378
100 3.937
35 1.378
100 3.937
110 4.331
345 13.583
25 0.984
70 2.756
80 3.150
230 9.055
15 0.591
40 1.575
28 1.102
75 2.953
FD-WKZ1
20 to 180 0.787 to 7.087
20 to 480 0.787 to 18.898
FD-WL41
7 to 12 0.276 to 0.472
(Convergent point 8 0.315)
6 to 13.5 0.236 to 0.531
(Convergent point 8 0.315)
FD-WL48
1 to 4.5 0.039 to 0.177
0.5 to 6.5 0.020 to 0.256
FD-WS8
80 3.150
230 9.055
FD-WSG4
28 1.102
75 2.953
FD-WT4
FD-WT8
FD-WV42
FD-WZ4
FD-WZ4HB
FD-WZ7
FD-WZ7HB
15 0.591
40 1.575
80 3.150
230 9.055
6 0.236
20 0.787
2 to 20 0.079 to 0.787
1 to 70 0.039 to 2.756
2 to 20 0.079 to 0.787
1 to 70 0.039 to 2.756
1 to 55 0.039 to 2.165
160 6.299
1 to 60 0.039 to 2.362
0.5 to 180 0.020 to 7.087
Type
Fiber cable
length
: Free-cut
ø3 mm ø0.118 in
Side-view
ø2.5 mm ø0.098 in
M3
M4
Side-view
M6, Sharp bending
M4, Sharp bending
M4, High precision
Long sensing range,
Rectangular
PHOTOELECTRIC
SENSORS
Dimensions
2 m 6.562 ft
P.107
P.107
Convergent reflective
1 m 3.281ft
ø3 mm ø0.118 in,
Sharp bending
ø3 mm ø0.118 in,
High precision
M3, Sharp bending
M4, Sharp bending
Side-view, Sharp bending
Rectangular, Compact
Sharp bending
P.106
P.106
P.106
P.106
P.106
P.106
P.107
P.107
P.107
1 m 3.281ft
2 m 6.562 ft
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
P.107
P.107
2 m 6.562 ft
MICRO
PHOTOELECTRIC
SENSORS
P.107
P.107
P.107
P.108
P.108
P.108
P.108
P.108
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
Notes:1)The standard sensing objects of the sensing ranges vary depending on the fibers.
2)
Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
HUMAN
MACHINE
INTERFACES
Sensing ranges (mm in) when using in combination with the FR-WKZ11 reflector (optional)
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Reflector
Amplifier
FR-WKZ11 + RF-210
FX-101□
FX-102□
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
100 to 700 3.937 to 27.559
100 to 1,100 3.937 to 43.307
FR-WKZ11 + RF-220 100 to 1,300 3.937 to 51.181
100 to 2,600 3.937 to 102.362
FR-WKZ11 + RF-230 100 to 2,000 3.937 to 78.740
100 to 4,000 3.937 to 157.480
UV
CURING
SYSTEMS
Selection
Guide
Fibers
Amplifiers
FX-500
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
167
Digital Fiber Sensor
FIBER OPTIONS
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
FX-100 SERIES
Lens (For thru-beam type fiber)
Designation
Model No.
Description
MICRO
PHOTOELECTRIC
SENSORS
Sensing range (mm in) [Lens on both sides]
AREA
SENSORS
Fiber
Expansion
lens
(Note 1)
INDUCTIVE
PROXIMITY
SENSORS
FX-LE1
PARTICULAR
USE
SENSORS
3,500 137.795 (Note 2)
3,000 118.110
3,500 137.795 (Note 2)
FT-R80
1,900 74.803
3,500 137.795 (Note 2)
FT-W8
3,000 118.110
3,500 137.795 (Note 2)
• Ambient temperature:
–60 to +350 °C
–76 to +662 °F
(Note 4)
FT-P80, FT-P60
3,500 137.795 (Note 2) 3,500 137.795 (Note 2)
FT-P81X
1,600 62.992 (Note 2) 1,600 62.992 (Note 2)
FT-H35-M2
2,000 78.740
3,500 137.795 (Note 2)
FT-H20W-M1
1,300 51.181
1,600 62.992 (Note 2)
FT-H20-M1
1,600 62.992 (Note 2) 1,600 62.992 (Note 2)
FT-H20-J20-S, FT-H20-J30-S,
1,000 39.370
FT-H20-J50-S
SIMPLE
WIRE-SAVING
UNITS
Fiber
MEASUREMENT
SENSORS
HUMAN
MACHINE
INTERFACES
For thru-beam type fiber
STATIC
CONTROL
DEVICES
PLC /
TERMINALS
Superexpansion
lens
(Note 1)
Tremendously increases the
sensing range with large
diameter lenses.
FX-LE2
• Ambient temperature:
–60 to +350 °C
–76 to +662 °F
(Note 4)
FT-P81X
1,600 62.992 (Note 2) 1,600 62.992 (Note 2)
FT-H35-M2
3,500 137.795 (Note 2) 3,500 137.795 (Note 2)
FT-H20W-M1, FT-H20-M1 1,600 62.992 (Note 2) 1,600 62.992 (Note 2)
3,500 137.795 (Note 2) 3,500 137.795 (Note 2)
FT-H13-FM2
Beam axis is bent by 90°.
Side-view
lens
FX-SV1
• Ambient temperature:
–60 to +300 °C
–76 to +572 °F
(Note 4)
Amplifier
FX-101□
FX-102□
FT-B8
530 20.866
1,450 57.087
FT-FM2, FT-T80
550 21.654
1,700 66.929
FT-W8
450 17.717
1,300 51.181
FT-P80
420 16.535
1,400 55.118
FT-P60
300 11.811
850 33.465
FT-P81X
550 21.654
1,700 66.929
FT-H35-M2
280 11.024
800 31.496
140 5.512
400 15.748
280 11.024
840 33.071
150 5.906
410 16.142
Fiber
FT-H20-M1
Selection
Guide
FT-H20-J20-S, FT-H20-J30-S,
FT-H20-J50-S
Fibers
Amplifiers
Expansion
lens for vacuumresistant fiber
(Note 1)
FV-LE1
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
FX-102□
3,500 137.795 (Note 2) 3,500 137.795 (Note 2)
FT-H20W-M1
FX-500
FX-101□
FT-B8, FT-FM2,
FT-R80, FT-W8,
FT-P80, FT-P60
Sensing range (mm in) [Lens on both sides]
FA
COMPONENTS
UV
CURING
SYSTEMS
Amplifier
FT-H20-J20-S, FT-H20-J30-S,
3,500 137.795 (Note 2) 3,500 137.795 (Note 2)
FT-H20-J50-S
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
MACHINE
VISION
SYSTEMS
3,500 137.795 (Note 2)
Sensing range (mm in) [Lens on both sides]
WIRE-SAVING
SYSTEMS
LASER
MARKERS
FX-102□
2,200 86.614
FT-FM2, FT-T80
SENSOR
OPTIONS
ENDOSCOPE
FX-101□
FT-B8
Increases the sensing
range by 5 times or more.
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
Amplifier
Side-view
lens for
vacuumresistant fiber
FV-SV2
Sensing range increases by
4 times or more.
• Ambient temperature:
–60 to +350 °C –76 to +662 °F
(Note 4)
Sensing range (mm in) [Lens on both sides] (Note 3)
Beam axis is bent by 90°.
Sensing range (mm in) [Lens on both sides] (Note 3)
• Ambient temperature:
–60 to +300 °C –76 to +572 °F
(Note 4)
Fiber
Fiber
Amplifier
FT-H30-M1V-S
Amplifier
FT-H30-M1V-S
FX-101□
FX-102□
450 17.717
1,600 62.992
FX-101□
FX-102□
450 17.717
1,600 62.992
Notes: 1) Be careful when installing the thru-beam type fiber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is difficult.
Especially when installing a fiber with many cores (sharp bending fibers and heat-resistant glass fiber), please be sure to use it only after you have
adjusted it sufficiently.
2) The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long (FT-H20W-M1, FT-P81X and FT-H20-M1: 1,600 mm 62.992 in).
3) The fiber cable length for the FT-H30-M1V-S is 1 m 3.281 ft. The sensing ranges in FX-102□ (long sensing range type) take into account the length of
the FT-J8 atmospheric side fiber.
4) For details on the ambient temperatures for the fibers which being combined, refer to p.76~.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
FX-100 SERIES
FIBER OPTIONS
FIBER
SENSORS
Lens (For reflective type fiber)
Designation
Pinpoint spot
lens
LASER
SENSORS
Model No.
PHOTOELECTRIC
SENSORS
Description
Pinpoint spot of ø0.5 mm ø0.020 in. Enables detection of minute objects or small marks.
• Distance to focal point: 6 ± 1 mm 0.236 ± 0.039 in • Applicable fibers: FD-WG4, FD-G4
• Ambient temperature: –40 to +70 °C –40 to +158 °F (Note 2)
FX-MR1
Sensing range for FX-101□ (mm in) (Note 1)
The spot diameter is adjustable from ø0.7 to
ø2 mm ø0.028 to ø0.079 in according to how
much the fiber is screwed in.
• Applicable fibers: FD-WG4, FD-G4
• Ambient temperature: –40 to +70 °C
Spot
–40 to +158 °F (Note 2)
diameter
• Accessory: MS-EX-3 (mounting bracket)
Screw-in
depth
Zoom lens
FX-MR2
Distance to
focal point
Screw-in depth Distance to focal point Spot diameter
18.5 0.728
approx.
ø0.7 ø0.028
12 mm 0.472 in
27 1.063
approx.
ø1.2 ø0.047
14 mm 0.551 in
43 1.693
approx.
ø2.0 ø0.079
7 mm 0.276 in
For reflective type fiber
Sensing range for FX-101□ (mm in) (Note 1)
Finest spot
lens
Extremely fine spot of ø0.3 mm ø0.012 in
approx. achieved.
• Applicable fibers: FD-WG4, FD-G4, FD-EG1,
FD-EG2, FD-EG3, FD-G6X, FD-G6
• Ambient temperature: –40 to +70 °C
–40 to +158 °F (Note 2)
FX-MR3
Distance to
focal point
Zoom lens
Side-view
type
FX-MR5
Distance
to focal
point
Spot diameter
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
FD-EG3
7.5 ± 0.5
ø0.15 ø0.006
0.295 ± 0.020 approx.
WIRE-SAVING
SYSTEMS
FD-EG2
7.5 ± 0.5
ø0.2 ø0.008
0.295 ± 0.020 approx.
FD-EG1
7.5 ± 0.5
ø0.3 ø0.012
0.295 ± 0.020 approx.
FD-WG4/G4,
FD-G6X/G6
7.5 ± 0.5
ø0.5 ø0.020
0.295 ± 0.020 approx.
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
7 ± 0.5
ø0.1 ø0.004
0.276 ± 0.020 approx.
FD-EG2
7 ± 0.5
ø0.15 ø0.006
0.276 ± 0.020 approx.
FD-EG1
7 ± 0.5
ø0.2 ø0.008
0.276 ± 0.020 approx.
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FD-WG4/G4,
FD-G6X/G6
7 ± 0.5
ø0.4 ø0.016
0.276 ± 0.020 approx.
FA
COMPONENTS
Screw-in depth Distance to focal point Spot diameter
FX-MR2 is converted into a side-view type
and can be mounted in a very small space.
• Applicable fibers: FD-WG4, FD-G4
• Ambient temperature: –40 to +70 °C
–40 to +158 °F (Note 2)
PLC /
TERMINALS
FD-EG3
Sensing range for FX-101□ (mm in) (Note 1)
Screw-in
depth
AREA
SENSORS
Fiber model No. Distance to focal point Spot diameter
Extremely fine spot of ø0.1 mm ø0.004 in
approx. achieved.
• Applicable fibers: FD-WG4, FD-G4, FD-EG1,
FD-EG2, FD-EG3, FD-G6X, FD-G6
• Ambient temperature: –20 to +60 °C
–4 to +140 °F (Note 2)
FX-MR6
MICRO
PHOTOELECTRIC
SENSORS
Fiber model No. Distance to focal point Spot diameter
Sensing range for FX-101□ (mm in) (Note 1)
Spot diameter
Finest spot
lens
168
8 mm 0.315 in
13 0.512
approx.
ø0.5 ø0.020
10 mm 0.394 in
15 0.591
approx.
ø0.8 ø0.031
14 mm 0.551 in
30 1.181
approx.
ø3.0 ø0.118
Notes:1) The sensing ranges are the values when used in combination with FX-101□ (standard type). Please contact our office for details on sensing ranges for
other types of amplifier.
2) For details on the ambient temperatures for the fibers which being combined, refer to p.76~.
HUMAN
MACHINE
INTERFACES
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Fibers
Amplifiers
FX-500
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
169
Digital Fiber Sensor
FX-100 SERIES
SPECIFICATIONS
FIBER
SENSORS
LASER
SENSORS
AREA
SENSORS
Model No.
MICRO
PHOTOELECTRIC
SENSORS
Item
Cable set
Cable set
FX-101(-Z) (Note 5)
FX-101-CC2
FX-102(-Z) (Note 5)
FX-102-CC2
PNP output
FX-101P(-Z) (Note 5)
FX-101P-CC2
FX-102P(-Z) (Note 5)
FX-102P-CC2
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Supply voltage
Power consumption
Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
<NPN output type>
<PNP output type>
NPN open-collector transistor
PNP open-collector transistor
• Maximum sink current: 100 mA
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less (at 100 mA sink current)
• Residual voltage: 1.5 V or less (at 100 mA source current)
Output
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
Long sensing range type
NPN output
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
Standard type
Type
PHOTOELECTRIC
SENSORS
Output operation
Selectable either Light-ON or Dark-ON, at SET mode
Short-circuit protection
SENSOR
OPTIONS
Incorporated
External input
<NPN output type>
NPN non-contact input
• Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC
(Source current 0.5 mA or less)
• Input impedance: 10 kΩ approx.
STATIC
CONTROL
DEVICES
Response time
Emission frequency 0: 250 µs or less (factory default setting)
Emission frequency 1: 450 µs or less
Emission frequency 2: 500 µs or less
Emission frequency 3: 600 µs or less
ENDOSCOPE
Sensitivity setting
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
LASER
MARKERS
PLC /
TERMINALS
Attenuation function
Selection
Guide
Fibers
Amplifiers
Interference prevention
function
Environmental resistance
UV
CURING
SYSTEMS
4 digits (green) + 4 digits (red) LCD display
Fine sensitivity adjustment function
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
MACHINE
VISION
SYSTEMS
Orange LED (lights up when the output is ON)
Digital display
Timer function
Ambient temperature
Incorporated
ON-delay / OFF-delay timer, switchable either effective or ineffective
[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms]
3–level + Auto setting
Incorporated
Emission frequency selection method (Note 2)
(Functions at emission frequency 1, 2 or 3)
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
Ambient illuminance
1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 3)
Insulation resistance
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 3)
Vibration resistance
10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Shock resistance
Emitting element (modulated)
Red LED (Peak emission wavelength: 632 nm 0.025 mil)
Material
FX-500
FX-100
FX-300
Enclosure: Polycarbonate, Key switch: Polycarbonate, Fiber lock lever: PBT
Connecting method
Connector (Note 4)
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Cable length
Weight
Net weight: 15 g approx.
Gross weight: 35 g approx.
Net weight: 15 g approx.
Gross weight: 75 g approx.
Net weight: 15 g approx.
Gross weight: 35 g approx.
Net weight: 15 g approx.
Gross weight: 75 g approx.
–
CN-14A-C2
(Connector attached cable, 2 m 6.562 ft long): 1pc.
–
CN-14A-C2
(Connector attached cable, 2 m 6.562 ft long): 1pc.
FX-410
FX-311
FX-301-F7/
FX-301-F
Incorporated
Emission frequency selection method (Note 2)
(Functions at emission frequency 1, 2, 3 or 4)
–10 to +55 °C +14 to +131 °F (If 4 to 7 units are mounted close together: –10 to +50 °C +14 to +122 °F, if 8 to 16 units are mounted close together:
–10 to +45 °C +14 to +113 °F) (No dew condensation or icing allowed), Storage: –20 to +70 °C –4 to +158 °F
Ambient humidity
Voltage withstandability
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teaching
Operation indicator
HUMAN
MACHINE
INTERFACES
FA
COMPONENTS
<PNP output type>
PNP non-contact input
• Signal condition
High: +4 V to +V DC
(Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
• Input impedance: 10 kΩ approx.
Accessory
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to
different frequency values.
However, the interference prevention function does not operate at emission frequency 0 (factory default setting) for the FX-101(P)(-Z) / FX-101(P)-CC2.
3) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
4) Connector attached cable CN-14A-C2 is not attached to the models that have no “-CC2” at the end of the model Nos.
Make sure to use the optional connector attached cable CN-14A(-R)-C□ or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.
(contact: SPHD-001T-P0.5, housing: PAP-04V-S).
5) Model Nos. having the suffix “-Z” are M8 plug-in connector type. Make sure to use the optional M8 attached connector cable CN-24A-C□.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
FX-100 SERIES
I/O CIRCUIT AND WIRING DIAGRAMS
FIBER
SENSORS
FX-10□(-Z/-CC2)
NPN output type
I/O circuit diagram
Terminal arrangement diagram
MICRO
PHOTOELECTRIC
SENSORS
Color code of cable with connector
Terminal No.
(Brown) +V
Sensor circuit
D
2
Tr
+8 V
(Black) Output
Load
+
–
100 mA max.
ZD
3
4
(White) External input
12 to 24 V DC
±10 %
*1
Function
1
1
+V
2
2
Output
3
External input
4
0V
3
4
(Blue) 0 V
Internal circuit
LASER
SENSORS
PHOTOELECTRIC
SENSORS
Connector type
Terminal No.
1
170
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Users’ circuit
PARTICULAR
USE
SENSORS
M8 plug-in connector type
Symbols … D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr: NPN output transistor
1
*1
Terminal No.
Function
1
+V
2
Output
3
External input
4
0V
2
Non-voltage contact or NPN open-collector transistor
or
3
4
High (+8 V to +V DC, or open): Ineffective
Low [(0 to +2 V DC (source current 0.5 mA or less)]: Effective
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
FX-10□P(-Z/-CC2)
PNP output type
I/O circuit diagram
LASER
MARKERS
Terminal arrangement diagram
PLC /
TERMINALS
Connector type
Terminal No.
Color code of cable with connector
Sensor circuit
1
3
(White) External input
100 mA max.
2
D
4
Function
1
1
+V
2
2
Output
3
External input
4
0V
*1
ZD
Tr
Terminal No.
(Brown) +V
(Black) Output
(Blue) 0 V
Internal circuit
Load
+
–
12 to 24 V DC
±10 %
3
4
M8 plug-in connector type
1
*1
or
3
Terminal No.
Function
1
+V
2
Output
4
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
3
External input
4
0V
Selection
Guide
Fibers
2
Non-voltage contact or PNP open-collector transistor
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
UV
CURING
SYSTEMS
Users’ circuit
Symbols … D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr: PNP output transistor
HUMAN
MACHINE
INTERFACES
High [ +4 V to +V DC (sink current 0.5 to 3 mA)]: Effective
Low (0 to +0.6 V DC, or open): Ineffective
Amplifiers
FX-500
FX-100
FX-300
FX-410
FX-311
FX-301-F7/
FX-301-F
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
SENSING CHARACTERISTICS (TYPICAL)
2,000
78.740
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
1,000
39.370
FT-P81X
Parallel deviation
FX-101
200
7.874
Fiber
head
ℓ
100
3.937
0
200
7.874
L
FX-101
ℓ
0
400
15.748
Reflective type
Sensing field
FX-102
500
19.685
100
0
100
200
3.937
3.937
7.874
Left
Center
Right
Operating point ℓ (mm in)
FD-B8
L
Fiber
head
FD-FM2
Setting distance L (mm in)
FX-101
200
7.874
White non-glossy paper
ℓ
L
Fiber
head
Reflective type
Sensing field
Fiber
head
L
Fiber
head
0
400
15.748
200
0
200
400
7.874
7.874 15.748
Left
Center
Right
Operating point ℓ (mm in)
FT-W8 FT-WS8 Thru-beam type
FX-102
200
7.874
0
100
3.937
100
3.937
ℓ
0
100
3.937
Fiber
head
L
Fiber
head
Reflective type
Sensing field
FX-101
White non-glossy paper
ℓ
L
Fiber
head
10
0
10
20
0.394
0.394
0.787
Left
Center
Right
Operating point ℓ (mm in)
Setting distance L (mm in)
100
3.937
200
7.874
FX-101
White non-glossy paper
ℓ
L
Fiber
head
0
200
7.874
100
3.937
0
40
1.575
FX-101
White non-glossy paper
ℓ
L
Fiber
head
20
0
20
40
0.787
0.787
1.575
Left
Center
Right
Operating point ℓ (mm in)
0
40
1.575
Reflective type
150
5.906
FX-102
100
3.937
FX-101 White non-glossy paper
ℓ
L
Fiber
head
50
1.969
0
40
1.575
20
0
20
40
0.787
0.787 1.575
Left
Center
Right
Operating point ℓ (mm in)
FD-WG4 FD-WSG4 Reflective type
Sensing field
80
3.150
FX-102
FX-101
100
3.937
100
0
100
200
3.937
3.937 7.874
Left
Center
Right
Operating point ℓ (mm in)
FD-G6X
20
0
20
40
0.787
0.787
1.575
Left
Center
Right
Operating point ℓ (mm in)
Sensing field
FX-102
L
200
7.874
FD-W8 FD-WS8 FD-WT8 Reflective type
200
7.874
Fiber
head
ℓ
200
7.874
Sensing field
50
1.969
0
40
1.575
50
0
50
100
1.969
1.969
3.937
Left
Center
Right
Operating point ℓ (mm in)
Reflective type
100
3.937
FX-101
Fiber
head
50
0
50
100
1.969
1.969
3.937
Left
Center
Right
Operating point ℓ (mm in)
FD-G4
FX-102
400
15.748
FX-102
White non-glossy paper
ℓ
L
Fiber
head
FD-P81X
600
23.622
FX-101
FX-102
0
20
0.787
ℓ
Parallel deviation
Sensing field
FX-101
200
7.874
50
0
50
100
1.969
1.969
3.937
Left
Center
Right
Operating point ℓ (mm in)
FD-NFM2 FD-NFM2S FD-NFM2S4 Reflective
type
FD-SNFM2 FD-T40
50
1.969
FX-101
500
19.685
500
0
500
1,000
19.685
19.685 39.370
Left
Center
Right
Operating point ℓ (mm in)
FT-W4 FT-WS4 Thru-beam type
200
0
200
400
7.874
7.874 15.748
Left
Center
Right
Operating point ℓ (mm in)
400
15.748
FX-102
0
100
3.937
Setting distance L (mm in)
FX-311
Fiber
head
Sensing field
400
15.748
FX-300
FX-301-F7/
FX-301-F
0
1,000
39.370
FX-102
Amplifiers
FX-410
L
Fiber
head
Parallel deviation
1,000
39.370
FX-102
Fiber
head
Fibers
FX-100
ℓ
FX-102
800
31.496
300
11.811
Selection
Guide
FX-500
Thru-beam type
Fiber
head
500
19.685
400
15.748
Setting distance L (mm in)
UV
CURING
SYSTEMS
ℓ 8 mm 0.315 in
approx.
L
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
Fiber
head
Fiber head
0
200
100
0
100
200
7.874
7.874
3.937
3.937
Down
Center
Up
Operating point ℓ (mm in)
100
0
100
200
3.937
3.937
7.874
Left
Center
Right
Operating point ℓ (mm in)
Parallel deviation
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
L
FX-101
1,000
39.370
FX-102
White non-glossy paper
ℓ
L
Fiber
head
20
0
20
40
0.787
0.787
1.575
Left
Center
Right
Operating point ℓ (mm in)
Setting distance L (mm in)
MEASUREMENT
SENSORS
Parallel deviation
FX-101
Setting distance L (mm in)
WIRE-SAVING
SYSTEMS
ℓ
1,000
39.370
2,000
78.740
FT-NFM2 FT-NFM2S
Thru-beam
FT-NFM2S4 FT-SNFM2 type
Setting distance L (mm in)
SIMPLE
WIRE-SAVING
UNITS
Fiber
head
FX-102
3,000
118.110
Fiber
head
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
FX-101
1,000
39.370
0
200
7.874
FT-FM2 FT-FM2S FT-FM2S4 Thru-beam
type
FT-SFM2 FT-T80
Setting distance L (mm in)
FX-102
3,000
118.110
Setting distance L (mm in)
INDUCTIVE
PROXIMITY
SENSORS
Parallel deviation
Setting distance L (mm in)
PRESSURE /
FLOW
SENSORS
Thru-beam type
4,000
157.480
Setting distance L (mm in)
LIGHT
CURTAINS
• Vertical direction
4,000
157.480
Setting distance L (mm in)
AREA
SENSORS
FT-B8
Thru-beam type
Parallel deviation
• Horizontal direction
Setting distance L (mm in)
MICRO
PHOTOELECTRIC
SENSORS
FT-A8
Setting distance L (mm in)
LASER
SENSORS
Contact our office for sensing characteristics that are not contained here.
Setting distance L (mm in)
FIBER
SENSORS
PHOTOELECTRIC
SENSORS
FX-100 SERIES
Setting distance L (mm in)
171
FX-102
60
2.362
40
1.575
20
0.787
0
20
0.787
FX-101
White non-glossy paper
ℓ
L
Fiber
head
10
0
10
20
0.394
0.394
0.787
Left
Center
Right
Operating point ℓ (mm in)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Digital Fiber Sensor
•Never use this product as a sensing device
for personnel protection.
•In case of using sensing devices for
personnel protection, use products which
meet laws and standards, such as OSHA,
ANSI or IEC etc., for personnel protection
applicable in each region or country.
Using in combination with the FX-300 / FX-410 series
•The FX-100 series does not use the horizontal
connectors that are used with the FX-300 / FX-410
series. Please note that horizontal connection cannot be
performed using a connector attached cable. In addition,
the optical communication function is not equipped on
the FX-100 series, so it is unable to perform interference
prevention for use with the FX-300 / FX-410 series.
If using the FX-100 series together with the FX-300 /
FX-410 series side-by-side, please set the same models
together in groups.
Mounting
<When using a DIN rail>
How to mount the amplifier
2
it the rear part of the mounting
F
section of the amplifier on a 35 mm
1.378 in width DIN rail.
Press down the rear part of the
mounting section of the unit on the
35 mm 1.378 in width DIN rail and
fit the front part of the mounting
section to the DIN rail.
1
2
Push the amplifier forward.
Lift up the front part of the
amplifier to remove it.
FIBER
SENSORS
Wiring
LASER
SENSORS
•Make sure that the power supply is OFF while adding or
removing the amplifiers.
•Note that if a voltage exceeding the reted range is applied,
or if an AC power supply is directly connected, the product
may get burnt or damaged.
•Note that short-circuit of the load or wrong wiring may burn
or damage the product.
•Do not run the wires together with high-voltage lines or
power lines, or put them in the same raceway. This can
cause malfunction due to induction.
•Verify that the supply voltage variation is within the rating.
•If power is supplied from a commercial switching regulator,
ensure that the frame ground (F.G.) terminal of the power
supply is connected to an actual ground.
•In case noise generating equipment (switching regulator,
inverter motor, etc.) is used in the vicinity of this product,
connect the frame ground (F.G.) terminal of the equipment
to an actual ground.
•Make sure to use the quick-connection cable (optional) for
the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3
mm2 or more, cable. However, in order to reduce noise,
make the wiring as short as possible.
PHOTOELECTRIC
SENSORS
Part description
LASER
MARKERS
2
Operation indicator
(Orange)
ON key /
Setting value UP key
OFF key /
Setting value DOWN key
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
PLC /
TERMINALS
MODE key
HUMAN
MACHINE
INTERFACES
35 mm 1.378 in width DIN rail
How to remove the amplifier
1
172
Refer to General precautions, and to the “Operation Guide” on our
website for details pertaining to operating instructions for the amplifier.
PRECAUTIONS FOR PROPER USE
1
FX-100 SERIES
Digital display (Green)
(Threshold value)
Digital display (Red)
(Incident light intensity)
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
1
2
Setting mode
•Setting mode appears after the MODE key is pressed for
2 sec. in RUN mode.
Note: Take care that if the front part is lifted without pushing the amplifier
forward, the hook on the rear portion of the mounting section is likely
to break.
Setting item Factory setting
Teaching
mode
<When using screws with washers>
Description
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Threshold value can be set in 2-point teaching,
limit teaching, or full-auto teaching.
Selection
Guide
•Use M3 screws with washers
for mounting. The tightening
torque should be 0.5 N·m or
less.
Output
operation
setting
Timer
operation
setting
M3 screw
with washer
Timer
setting
Emission
amount
setting
Fibers
[Dark-ON]
[Without timer]
Light-ON or Dark-ON can be set.
Without timer, ON delay timer, or OFF delay
timer can be set.
FX-500
In case of setting ON-delay timer or OFF-delay
FX-300
[ON-delay timer: 10 ms] timer in the timer operation setting mode, timer
can be set. When timer is not set, this mode is
[OFF-delay timer: 10 ms] not displayed.
Level 3
Setting for reduced intensity of emission
amount is possible when the incident light
intensity is saturated.
FX-101□
Emission
frequency
setting
0 (Response time:
250 µs or less)
FX-102□
1 (Response time:
2.5 ms or less)
Amplifiers
In case of using the fiber heads in parallel,
interference can be prevented by setting
different emission frequency. However, when
emission frequency 0 is set, interference
cannot be prevented. Response time
corresponds to emission frequency.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
FX-100
FX-410
FX-311
FX-301-F7/
FX-301-F
173
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
Digital Fiber Sensor
INDUCTIVE
PROXIMITY
SENSORS
PRO mode
• PRO mode appears after the MODE key is pressed for 4
sec. in RUN mode.
Setting item Factory setting
Shift
setting
External
input
setting
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
Threshold
value-storing
setting mode
(Note 2)
Threshold
value
follow-up
cycle
setting
(Note 3)
PLC /
TERMINALS
GETA
function
setting
(Note 4, 5)
[OFF]
[OFF]
[OFF]
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
ECO
setting
Digital display
inversion
setting
[OFF]
Selection
Guide
[OFF]
Fibers
Amplifiers
FX-500
FX-100
Setting
copy
Threshold value set at the limit teaching,
full-auto teaching or 2-point teaching by
external input is stored. When selecting
Auto in the emission amount setting
mode, the set emission amount level is
also stored.
When incident light intensity exceeds threshold
value, this mode can change the threshold value
with each set cycle depending on variations of the
incident light intensity. The follow-up shift amount
is same as the one set in the shift setting mode.
However, the threshold value is not stored.
Variations can be reduced by correcting the
present incident light intensity in each amplifier
to a target value. Target value to offset incident
light intensity can be selected from 0 to 2,000
by 100 unit each. For example, if the target
value is set to 2,000 when the incident light
intensity is 1,500, the incident light intensity
becomes 2,000.
It is possible to light up / turn off the digital
display. When ECO setting mode is ON, the
display turns off in 20 sec. approx. in RUN
mode. To light up the display again, press any
key for 2 sec. or more.
[NO]
Digital display can be inverted.
Reset
FX-311
FX-301-F7/
FX-301-F
<Setting procedures>
1 Set the setting copy mode of the master side amplifier to
“Copy sending ON”, and press the MODE key so that
“
” is shown on the digital display and the
sensor is in copy ready state. For the setting method,
refer to “Operation guide”.
2 Turn off the master side amplifier.
3 Connect the master side amplifier with the slave side
amplifier as shown below.
Color code of cable with connector
Master side amplifier
(Brown) +V
(Black) Input
(White) External input
+
–
12 to 24V DC
±10 %
(Blue) 0 V
Slave side amplifier
(Brown) +V
(Black) Input
(White) External input
[NO]
urn on the master side amplifier and the slave side
T
amplifier at the same time. (Note)
5 “
” is shown on the green digital display of the master
side amplifier and 4-digit code is shown on the red
digital display of it, then the copying starts. During copy
communication, “
” is shown on the green digital
display of the slave side amplifier, and the ongoing copy
communication indicator (“
”→“
”→“
”→
”→“
”→“
”→“
”→“
”) is displayed on
“
the red digital display.
6 When the copying is completed, “
” is shown on the
green digital display of the slave side amplifier, while the
4-digit code (the same code as the master side amplifier)
is shown on the red digital display of it.
7 Turn off the power of the master side amplifier and the
slave side amplifier and disconnect the wire.
4
Margin for threshold value to the present
incident light intensity can be checked. When
there is no margin, it is possible to make the
digital display blink.
: Set to “OFF”: does not function.
: Green blinks.
: Red blinks.
: Red and green blink.
: When conducting limit teaching or 2-point
teaching by external input, in case the rate of reference
incident light intensity and threshold value after teaching
is 200% or more, or in case it is less than half of the shift
amount, output turns ON / OFF every 100 ms. (Note 6)
The settings of the master side amplifier can
be copied to the slave side amplifier.
For details, refer to “Setting copy function”.
FX-300
FX-410
• Be sure to use the setting copy function between the
identical models (Between FX-101□ models or FX-102□
models).
This function cannot be used between different
models.
• Only one sensor can be connected on slave side with a
master side sensor for the setting copy function.
• Threshold value, output operation setting, timer
operation setting, timer setting, light-emitting amount
setting, shift setting, external input setting, threshold
value margin setting, ECO setting, digital display
inversion setting, and threshold value margin setting
can be copied.
(Blue) 0 V
[OFF]
UV
CURING
SYSTEMS
Threshold
value
margin
setting
Description
Setting copy function
• This can copy the settings of the master side amplifier to
the slave side amplifier.
Refer to the copy unit SC-SU1 for details.
Shift amount can be selected from 0 to 80 % in
the limit teaching. Select 0 % when it is desired
[Shift amount 15 %] to set the present incident light intensity as a
threshold value.
External input can be selected from emission
halt, limit teaching [+], limit teaching [-], full-auto
teaching, ECO (Note 1), 2-point teaching or
emission amount test. When setting the incident
”, output turns ON /
light intensity test “
OFF every 100ms when the rate of incident
[Emission halt]
light intensity and threshold value is less than
half of the set shift amount (for example, when
the rate of incident light intensity and threshold
value is within ±10 % for 20 % of shift amount)
at external input.
ENDOSCOPE
LASER
MARKERS
Refer to General precautions, and to the “Operation Guide” on our
website for details pertaining to operating instructions for the amplifier.
PRECAUTIONS FOR PROPER USE
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
FX-100 SERIES
Returns to default settings (factory settings.)
Notes: 1) When ECO is selected at the external input setting mode, key operation on the main body is invalid during external input.
2) This mode is not indicated unless any of “
”, “
”,
” or “
” is set at the external input setting mode.
“
3) If the incident light intensity becomes “300” or less, the follow-up
operation stops. In that condition, threshold value [digital display
(green)] blinks. This function can be used when thru-beam type or
retroreflective type fiber is applied to this product. If reflective type fiber
is applied, the function cannot be used depending on use conditions.
4) If MODE key is pressed in RUN mode when GETA function is
used, the incident light intensity before setting GETA function is
displayed on the red digital display for 2 sec. approx.
5) When GETA function is used in saturation of incident light intensity
(4,000 or more,) “
” is indicated on the red digital display.
Correction value is up to 4,000.
6)This mode does not operate unless any of “ ”, “ ” or
“ ” is set at the external input setting mode.
*If copying the settings to another amplifier repeatedly, follow the steps 3
to 7 .
Note: Take care that if the power is not turned on at the same time, the
setting contents may not be copied.
<To cancel the setting copy mode of the master side amplifier>
1
2
W
hile the slave side amplifier is disconnected, turn on
the power of the master side amplifier.
Press the MODE key for 2 sec. approx.
Digital Fiber Sensor
Refer to General precautions, and to the “Operation Guide” on our
website for details pertaining to operating instructions for the amplifier.
PRECAUTIONS FOR PROPER USE
Others
Code setting function
• The code setting function makes it possible to set the
output operation, timer operation, amount of light emitted,
frequency of light emitted, ECO setting, external input,
and amount of shift by selecting a code of one’s choice.
• While in the RUN Mode, pressing and holding both
the ON key ( ) and OFF key ( ) simultaneously for 4
seconds will switch to the code setting function.
Timer
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
1st digit
Output
Timer
operation (Note 1)
2nd digit
3rd digit
Emission
frequency
D-ON
4th digit
Emission
External
ECO
amount
input
setting
FX-101□ FX-102□
Shift
(Note 1)
5%
non
0
1
Emission
halt
ond 10 ms
1
2
Limit
teaching [+]
2
3
Level 3
(OFF)
ond 40 ms
OFF Limit
teaching [-]
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
10 %
15 %
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
<Table of quick setting numbers>
Output operation
LASER
SENSORS
PRESSURE /
FLOW
SENSORS
Quick setting function
• The quick setting function makes it possible to set
the content of the SET Mode (output operation, timer
operation, amount of light emitted, and frequency of light
emitted) simply by selecting a setting number.
• While in the RUN Mode, pressing and holding both
the ON key ( ) and OFF key ( ) simultaneously for 2
seconds will switch to the quick setting function.
FIBER
SENSORS
LIGHT
CURTAINS
<Code table>
Code
• Do not use during the initial transient time (0.5 sec.) after
the power supply is switched on.
• Take care that the product is not directly exposed
to fluorescent lamp from a rapid-starter lamp, a high
frequency lighting device or sunlight etc., as it may affect
the sensing performance.
• This product is suitable for indoor use only.
• Avoid dust, dirt, and steam.
• Take care that the product does not come in contact with
oil, grease, organic solvents, such as thinner, etc., strong
acid or alkaline.
• This product cannot be used in an environment
containing inflammable or explosive gases.
• Never disassemble or modify this product.
• EEPROM is adopted to this product. It is not possible to
conduct teaching 100 thousand times or more, because
of the EEPROM’s lifetime.
No.
174
FX-100 SERIES
ofd 10 ms
3
4
Full-auto
teaching
ofd 40 ms
0
1
ECO
1
2
Emission
halt
30 %
ond 10 ms
2
3
Limit
teaching [+]
35 %
ond 40 ms
3
4
Limit
teaching [-]
40 %
20 %
25 %
LASER
MARKERS
Emission amount setting
D-ON
non
Level 3 (OFF)
D-ON
non
Level 2 (ON)
D-ON
ofd 10 ms
Level 3 (OFF)
D-ON
ofd 10 ms
Level 2 (ON)
D-ON
ofd 40 ms
Level 3 (OFF)
D-ON
ofd 40 ms
Level 2 (ON)
D-ON
ond 10 ms
Level 3 (OFF)
D-ON
ond 10 ms
Level 2 (ON)
D-ON
ond 40 ms
Level 3 (OFF)
D-ON
ond 40 ms
Level 2 (ON)
L-ON
ond 40 ms
Level 2 (ON)
L-ON
ond 40 ms
Level 3 (OFF)
L-ON
ond 10 ms
Level 2 (ON)
L-ON
ond 10 ms
Level 3 (OFF)
L-ON
ofd 40 ms
Level 2 (ON)
L-ON
ofd 40 ms
Level 3 (OFF)
L-ON
ofd 10 ms
Level 2 (ON)
L-ON
ofd 10 ms
Level 3 (OFF)
L-ON
non
Level 2 (ON)
L-ON
non
Level 3 (OFF)
non
Level 2
(ON)
L-ON
ofd 10 ms
ofd 40 ms
ON
0
1
Full-auto
teaching
1
2
ECO
2
3
2-point
teaching
45 %
50 %
Level 1
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Fibers
Amplifiers
OFF
3
4
Incident light
intensity test
0
1
2-point
teaching
ON
1
2
FX-500
FX-100
FX-300
FX-410
Incident light
intensity test
FX-311
FX-301-F7/
FX-301-F
Auto
2
3
3
4
Notes:1)When the present setting is out of the code setting range, “ ” is shown.
When “ ” is selected, the set content of the digit is not changed.
2) The factory setting is “
”.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
175
FIBER
SENSORS
LASER
SENSORS
Digital Fiber Sensor
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
FX-101□ FX-102□
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
FX-100 SERIES
0.8
0.031
Amplifier
48 1.890
30 1.181
20
13.2
0.787
0.520
6 0.236
Amplifier
FX-101(P)-Z FX-102(P)-Z
10.85
6 0.236
2.7
0.106
0.7
0.028
6 0.236 6 0.236 0.427
48 1.890
30 1.181
20
13.2
0.787
0.520
0.8
0.031
2.7
0.106
0.7 0.028
OFF key / Setting value DOWN key
ON key / Setting value UP key
MODE key
4.1
Operation indicator (Orange) 0.161
LIGHT
CURTAINS
Digital display (Green, Red)
OFF key / Setting value DOWN key
ON key / Setting value UP key
MODE key
4.1
Operation indicator (Orange) 0.161
Digital display (Green, Red)
PRESSURE /
FLOW
SENSORS
0.75 0.030
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
66.2
2.606
9
0.354
SENSOR
OPTIONS
7
0.276
4 0.157
3 0.118
10
ø3.2
ø0.126
6.5
0.256
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
1
0.039
0.8
0.031
4 0.157
3 0.118
ø6.5
ø0.256
10 30
0.3941.181
10
0.394
ø3.2
ø0.126
3.2
2 0.126
50 1.969
35 1.378
65.5 2.579
14.5
0.571
7
0.276
8.1
0.319
0.394
WIRE-SAVING
SYSTEMS
6 0.236
1.1
0.043
2
0.079
10 30
0.394 1.181
0.8
0.031
66.2
2.606
9
0.354
2 0.079
6 0.236
1.1
0.043
SIMPLE
WIRE-SAVING
UNITS
0.75 0.030
6.5
0.256
14.5
0.571
0.079
3.2
8.1
0.126 0.319
2
0.079
50 1.969
35 1.378
65.5 2.579
Suitable for 35 mm 1.378 in width DIN rail
Suitable for 35 mm 1.378 in width DIN rail
ENDOSCOPE
Amplifier mounting bracket (Optional)
MS-DIN-4
LASER
MARKERS
PLC /
TERMINALS
ø7.2 mm ø0.283 in
spot facing, 4 0.157 deep
ø3.2 ø0.126
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
9.25
0.364
ø6.2 mm ø0.244 in
spot facing, 3 0.118 deep
4
0.157
UV
CURING
SYSTEMS
5
0.197
Material: PBT
Fibers
(0.3158 )
(
35
1.378
)
FX-410
3 0.118
3.2
0.126
ø3.2 ø0.126
M3 square nut
5.6
0.220
24.7
0.972
9
0.354
1.6
0.063
1
0.039
24.5
0.965
35
1.378
32
1.260
4
0.157
Suitable for 35 mm 1.378 in width DIN rail
Material: Polycarbonate
Connector attached cable (Optional)
L
(
)
50
1.969
FX-100
FX-300
M3 (Iength 18 mm 0.709 in) pan head screws
60
2.362
6.2 mm 0.244 in
spot facing, 3 0.118 deep
CN-14A-C□ CN-14A-R-C□
Amplifiers
FX-500
2.75 0.108
3
0.118
15
0.591
1
0.039
15
0.591
End plate (Optional)
7.2 mm 0.283 in
spot facing, 4 0.157 deep
11.5
0.453
MACHINE
VISION
SYSTEMS
Selection
Guide
3.2
0.126
MS-DIN-E
ø3.7 ø0.146 cable
CN-14A-C2 is attached FX-101(P)-CC2 / FX-102(P)-CC2
• Length L
(0.3158 )
Model No.
CN-14A(-R)-C1
CN-14A(-R)-C2
CN-14A(-R)-C3
CN-14A(-R)-C5
Length L
1,000 39.370
2,000 78.740
3,000 118.110
5,000 196.850
FX-311
FX-301-F7/
FX-301-F
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com