Samsung DVD-C637 User`s manual

5 Disc DVD Changer
DVD-C637
AU
Downloaded From Disc-Player.com Samsung Manuals
AK68-00148D
Precautions
1. Setting up
Precautions
1
Ensure that the mains supply in your house complies with that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not
covered. Do not stack other, or heavy devices on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player ensure the disc
tray is empty. This player is designed for continuous use.
Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In
order to separate the player completely from the mains,it has to be disconnected by unplugging the
main plug, especially when left unused for a long period of time.
2. For your safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other opening to look inside the player.
3. Caution
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess
heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...).
Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is
for personal use only. If your player or disc has been stored in a cold atmosphere for example
during transportation in the winter, wait for approximately 2 hours until they have reached room
temperature, before use.
2
3
4
5
4. Disc
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place
disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean
disc if necessary, wipe from the centre to the border. Always put disc back into their cases after
playing and store in vertical position. Always place the disc properly into the tray using the proper
guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent,
if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a
circular motion, since circular scratches are likely to occur and could cause noise during playback.
5. Environmental info
Batteries: The battery used in this product contains chemicals that are harmful to the environment.
Do not dispose of batteries in the general domestic waste. It is recommended that the replacement of
the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of as
domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
Downloaded From Disc-Player.com Samsung Manuals
3
Before You Start
Table of contents
SETUP
Setup
General Features ........................................................................................................6
Disc Type and Characteristics ......................................................................................7
Description-Front Panel ................................................................................................8
Description-Rear Panel ................................................................................................9
Tour of the Remote Control ........................................................................................10
Accessories
CONNECTIONS
Connections
Choosing a Connection ..............................................................................................12
Remote Control
Batteries for
Remote Control (AA Size)
Easy Remote Control
correctly.
3
Replace the battery cover.
• Check the polarity + - of the
batteries (Dry-Cell)
Adjusting the Aspect Ratio (EZ View) ........................................................................22
Slow Repeat play ........................................................................................................24
Selecting the Audio Language ....................................................................................25
Selecting the Subtitle Language ................................................................................26
Changing the Camera Angle ......................................................................................27
Using the Instant Replay/Skip Function ....................................................................28
Using the Bookmark Function ....................................................................................29
Using the Zoom & 3D Sound Functions..........................................................................30
MP3/WMA Play ..........................................................................................................31
Program Play & Random Play ....................................................................................33
Picture CD Playback ..................................................................................................34
CHANGING
SETUP MENU
the battery cover on the back of
1 Open
the remote.
two AA batteries. Make sure that
2 Insert
the polarities (+ and -) are aligned
If remote doesn’t operate
properly:
Advanced Functions
ADVANCED
FUNCTIONS
Install Batteries in the
Remote
Video/Audio Cable
Playing a Disc ............................................................................................................14
Operating the Disc Changer ......................................................................................16
Using the Search & Skip Functions ..........................................................................17
Using the Display Function ........................................................................................18
Using the Disc and Title Menu ..................................................................................19
Using the Function Menu ..........................................................................................20
Repeat Play ................................................................................................................21
BASIC
FUNCTIONS
User’s Manual
Basic Functions
• Check if the batteries are drained.
Changing Setup menu
• Check if remote sensor is blocked
by obstacles.
REFERENCE
• Check if there is any fluorescent
lighting nearby.
Using the Setup Menu ................................................................................................36
Setting Up the Language Features ............................................................................37
Setting Up the Audio Options ....................................................................................39
Setting Up the Display Options ..................................................................................40
Setting Up the Parental Control..................................................................................42
Reference
Troubleshooting ..........................................................................................................43
Specifications ..............................................................................................................44
4
Downloaded From Disc-Player.com Samsung Manuals
5
General Features
Excellent Sound
Dolby Digital, a technology developed by
Dolby Laboratories, provides crystal clear
sound reproduction.
Screen
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
EZ VIEW
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
MP3/WMA
This unit can play discs created from
MP3/WMA files.
Recording Disc Size
Max.
Playing Time
Types
DVD
12cm
Audio
+
Video
Instant Replay
This function is used to replay the previous
10 seconds of the movie from the current
position.
Instant Skip
This function skips playback ahead 10
seconds.
8cm
VIDEO-CD
12cm
Audio
+
Video
Easy Remocon
You can easily operate this player by
combining only the functions that are
frequently used.
AUDIO-CD
NOTE
74 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
8cm
20 min.
12cm
74 min.
8cm
20 min.
Audio
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
• DVD-R, +R
• DVD+RW, -RW
• CD-RW
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Characteristics
Single-sided • DVD contains excellent
240 min.
sound and video due to
Double-sided
Dolby Digital and MPEG-2
480 min.
system.
Single-sided • Various screen and audio
functions can be easily
80 min.
Double-sided selected through the onscreen menu.
160 min.
* Discs which cannot be played with this player.
* Ability to play back may depend on recording conditions.
SETUP
DVD Changer
The DVD Changer holds 5 discs and provides
full random play with fast disc changes.
Disc Type and Characteristics
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
Disc Markings
~
• Play
Region
Number
PAL
• PAL broadcast
system in U.K,
France,
Germany, etc.
STEREO
• Dolby
Digital disc
DIGITAL
SOUND
• Stereo disc • Digital
Audio disc
• DTS disc
• MP3 disc
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
Downloaded From Disc-Player.com Samsung Manuals
7
Description-Front Panel
Description-Rear Panel
SETUP
COMPONENT
STANDBY/ON
DISC
EXCHANGE
OPEN/CLOSE
EASY VIEW
DISC
SKIP
VIDEO OUT
SELECT
S-VIDEO
1
3
2
4
5
6
7
8 9 10 11
Front Panel Controls
1. STANDBY / ON
• Use to turn your player on and off (standby).
6. SKIP (
/
) / SEARCH
• Use to skip or search a scene or music.
2. DVD CHANGER (TRAY)
• Press OPEN/CLOSE to open and close the disc
changer.
7. OPEN/CLOSE
• Press to open and close the disc tray.
1
2
3
4
5
6
Rear Panel
3. EZ VIEW
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
8. DISC EXCHANGE
• Press this button when you want to change a
disc without stopping playback of the current
disc.
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
4. PLAY/PAUSE (
)
• Begin or pause disc play.
9. DISC SKIP
• Use to skip a disc in order.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
5. STOP (
)
• Stops disc play.
10. REMOCON RECEIVER
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
• The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
11. FRONT DISPLAY
• Operation indicators are displayed here.
Front Panel Display
2
4. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video provides the best picture quality.
• The COMPONENT must be selected in the VIDEO OUT SELECT.
3
1
1. Indicates a disc is being played.
1 2 3 4 5
5
4
2. Play / Pause / Forward play
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture.
• The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
6. VIDEO OUT SELECT SWITCH
• Use this switch to set video out. If COMPONENT is selected, S-VIDEO may not work.
If S-VIDEO is selected, COMPONENT may not work.
3. Disc type indicator
4. Displays various messages concerning operations such as PLAY, STOP, LOAD, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
5. Disc indicator
• Indicates which numbered disc is playing.
8
Downloaded From Disc-Player.com Samsung Manuals
NOTE
• Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
9
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD Function Buttons
1
1. DVD POWER Button
13
16. PLAY/PAUSE Button (
• Turns the power on or off.
2. NUMBER Buttons
2
17. SKIP Buttons (
• Press the number (1~5) button for 2 seconds to
select the desired disc loaded in the DVD changer.
3. STEP Button
4. I.REPLAY Button
3
4
5
6
7
8
9
5. EZ VIEW Button
6. SEARCH Buttons (
/
)
• Allows you to search forward/backward through a
disc.
7. STOP Button (
)
8. DISC MENU Button
19
20
• Brings up the Disc menu.
9. TITLE MENU Button
• Brings up the Title menu.
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
21
10
11
12
22
23
24
25
26
27
1
7
19
18. RETURN Button
19. INFO Button
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
16
17
18
)
• Displays the current disc mode.
• This function is used to replay the previous 10
seconds of the movie from the current position.
15
/
• Use to skip the title, chapter, or track.
• Returns to a previous menu.
• Advances play one frame at a time.
14
)
• Begin/Pause disc play.
11. BOOKMARK Button
17
12. MENU Button
16
8
13. OPEN/CLOSE Button
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions
on a disc.
25. DISC SKIP
• Use to skip a disc in order.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• Brings up the DVD player’s setup menu.
• To open and close the disc tray.
14. 3D Button
20
15. I.SKIP Button
• This function skips playback ahead 10 seconds.
(Easy Remote Control)
10
Downloaded From Disc-Player.com Samsung Manuals
11
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
• Always turn off the DVD player, TV, and other components before
you connect or disconnect any cables.
Basic Audio
• Refer to the owner’s manual of the additional components you are
connecting for more information on those particular components.
AUDIO
SYSTEM
Method 2
Method 3
Good
picture
Better
picture
Best
picture
TV
Connection to an Audio System
Method 1
Method 1
CONNECTIONS
Before Connecting the DVD Player
AV Cable
Method 2
S-Video
Cable
Video
Cables
OR
OR
DVD
PLAYER
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
COMPONENT
COMPONENT
VIDEO OUT
SELECT
VIDEO OUT
SELECT
S-VIDEO
Audio Output Jacks
OR
Video Output Jack
S-Video Jack
S-VIDEO
Component Video Jacks
Method 1
DVD Player + TV with Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 2
DVD Player + TV with S-Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 3
DVD Player + TV with Component Video Jacks
(The VIDEO OUT SELECT switch must be set to the COMPONENT position.)
DVD
PLAYER
NOTE
Analog Audio Out
12
Downloaded From Disc-Player.com Samsung Manuals
Digital Audio Out
• If COMPONENT is selected, S-VIDEO will not work.
• If S-VIDEO is selected, COMPONENT will not work.
13
Playing a Disc
Playing a Disc
7 Step Motion Play (Except CD)
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
SELECT MENU LANGUAGE
Press
Touche
Dr cken Sie
Pulsar
Premere
Druk op
1
2
3
4
5
6
for English
pour Fran ais
f r Deutsch
para Espa ol
per Italiano
voor Nederlands
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
8 Slow Motion Play (Except CD)
Press the
button on the remote during PAUSE or STEP mode.
- By pressing the
button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
) to resume normal play.
- When playing a DVD/VCD, reverse slow motion play will not work.
BASIC
FUNCTIONS
Play
1 Press the OPEN/CLOSE button.
a disc gently into the tray with the disc’s label
2 Place
facing up.
The tray opens.
the PLAY/PAUSE (
3 Press
button to close the disc tray.
4 Stopping Play
5 Removing Disc
6 Pausing Play
Press the STOP (
) button or OPEN/CLOSE
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
) again,
it will pick up where you left off. (unless the disc is removed, the STOP (
) button is pressed twice or the
player is unplugged.)
NOTE
) button during play.
Press the OPEN/CLOSE button.
Press the PLAY/PAUSE (
) or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
) button once again.
14
Downloaded From Disc-Player.com Samsung Manuals
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
)
button to resume normal play.
• This
icon indicates an invalid button press.
15
Operating the Disc Changer
Using the Search & Skip Functions
The DVD Changer holds 5 discs and provides full random play with fast disc changes.
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Exchanging Discs
Searching through a Chapter or Track
Exchange allows you to change up to 4 discs
except the disc currently playing.
1
Press the DISC EXCHANGE button on the
front of the player when in the play mode.
The tray opens with two slots available for
you to load or change discs.
Disc Exchange
play, press the
1 During
on the remote.
or
button
• Press the
or
button on the remote and press again to search at a faster
speed on the DVD, VCD, CD.
2
BASIC
FUNCTIONS
DVD 2X, 4X, 8X, 16X, 32X, 128X
Press the DISC SKIP button on the remote or
on the front of the player to turn the platter to
the other two slots. Load or change the third
and fourth discs.
VCD 4X, 8X
CD
2X, 4X, 8X
• To change all the discs, first press the STOP button,
then the OPEN/CLOSE and DISC SKIP buttons.
Skipping Tracks
3
Press the DISC EXCHANGE, OPEN/CLOSE
button on the front of the player to close the
disc tray.
Using the DISC SKIP function
Use the Disc Skip function to change to another
disc currently in the disc platter.
in play or stop mode, press the DISC
1 While
SKIP button. The platter turns clockwise to the
next available disc.
1 During play, press the
or
button.
• When playing a DVD, if you press the
button, it moves to the next chapter.
If you press the
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
• When playing a CD, if you press the
button, it moves to next track.
If you press the
button, it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you
press the
button, it moves to the next track. If you press the
button,
it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and you press the
button, it moves forward 5 minutes. If you press the
button, it moves
backward 5 minutes.
16
Downloaded From Disc-Player.com Samsung Manuals
17
Using the Display Function
Using the Disc and Title Menu
When Playing a DVD/VCD/CD
1 During play, press the INFO button on the remote.
the UP/DOWN buttons to select the desired
2 Use
item.
Using the Disc Menu
3
DVD
Disc Menu
DVD
Title
01
Chapter 02
Time
Use the LEFT/RIGHT buttons to make the desired
setup, then press ENTER.
the playback of a DVD disc, press the
1 During
MENU button on the remote.
DVD
Audio
Subtitle
3D Sound
0:0 0 :1 3
2
Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
ENG 5.1CH
Press ENTER key
for Disc Menu
Title Menu
Function
Setup
Off
ENTER
RETURN
MENU
Off
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
ENTER
4
VCD
Track 01
Time 0:0 0 :4 8
To access the desired title when there is more than
Title one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you
Chapter can quickly find a specific passage (similar to tracks
on an audio CD).
Allows playback of the film from a desired time.
Time You must enter the starting time as a reference.
BASIC
FUNCTIONS
VCD
To make the screen disappear, press the INFO
button again.
3D Sound
Using the Title Menu
Off
ENTER
the playback of a DVD disc, press the
1 During
MENU button on the remote.
DVD
Disc Menu
Press ENTER key
for Title Menu
Title Menu
Title Menu using the UP/DOWN buttons,
2 Select
then press the RIGHT or ENTER button.
CD
Function
Setup
ENTER
RETURN
MENU
CD
Track 01
Time 0 :0 0 :4 8
Refers to the language of the film soundtrack. In the
Audio example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
3D Sound
O ff
ENTER
Refers to the subtitle languages available in the disc.
Subtitle You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
A surround sound effect is generated using only two
3D Sound front speakers.
NOTE
What is a Chapter?
Each Title on a DVD is usually divided
into chapters.
What is a Title?
NOTE
* When in VCD 2.0 mode (MENU ON mode), this function does
not work.
18
Downloaded From Disc-Player.com Samsung Manuals
A DVD may contain several different
titles. For example, if a disc contains
four different movies, each might be
considered a title.
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
• In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.
19
Using the Function Menu
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Using the Function Menu
1 Press the MENU button during playback.
Use the UP/DOWN buttons to highlight Function,
2 then
press the RIGHT or ENTER button.
DVD
Disc Menu
Info
When playing a DVD
Zoom
Title Menu
Function
Bookmark
DVD
Repeat
EZ View
3
Function selection screen appears: Info, Zoom,
Bookmark, Repeat and EZ View.
ENTER
Info (See Page 18)
Zoom (See Page 30)
Bookmark (See Page 29)
Repeat (See Page 21)
EZ View (See Page 22~23)
the UP/DOWN button to highlight one of the 5
4 Use
functions. Then press the RIGHT or ENTER button
to access the function.
RETURN
MENU
the REPEAT button on the remote.
1 Press
Repeat screen appears.
Off Chapter
Title
A-B
ENTER
Chapter, Title or A-B using the
2 Select
LEFT/RIGHT buttons.
* REPEAT A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the 'CLEAR' button or the
'REPEAT' button again.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
BASIC
FUNCTIONS
-
Setup
VCD/CD
Off
Track
Disc
A-B
ENTER
3 Press ENTER.
to normal play, press REPEAT again,
4 Tothenreturn
press the LEFT/RIGHT buttons to select Off.
Press ENTER, then press the PLAY/PAUSE
button.
NOTE
• You can also directly select these functions using their respective buttons on the remote.
20
Downloaded From Disc-Player.com Samsung Manuals
NOTE
• DVD repeats play by chapter or title, CD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
21
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
1 Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the
screen setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should set
the correct aspect ratio in the initial setup (See page 41).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
• 4:3 Pan Scan
Displays the central portion of the 16:9 screen.
The right and left sections of the screen are cut off.
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
ADVANCED
FUNCTIONS
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom
of the screen will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the black bars may
not disappear completely.)
Adjusting the Aspect Ratio (EZ View)
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
NOTE
• This function may behave differently depending on the type of disc.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
22
Downloaded From Disc-Player.com Samsung Manuals
23
Slow Repeat play
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
When playing a DVD
DVD
1
the
button to choose the play speed
2 Press
between 1/8X, 1/4X, and 1/2X of normal.
During play, press the PLAY/PAUSE (
Using the AUDIO button
) button.
Off Chapter
Title
A-B
ENTER
the REPEAT button on the remote.
3 Press
Repeat screen appears.
Chapter, Title or A-B using the LEFT/RIGHT
4 Select
buttons.
1 Press the AUDIO button.
the LEFT/RIGHT buttons to select the
2 Use
desired language on a DVD.
DVD
ENG DOLBY DIGITAL 5.1CH
- The audio languages are represented by abbreviations.
the LEFT/RIGHT buttons to select Stereo,
3 Use
LEFT or RIGHT. (On VCD/CD)
VCD/CD
Off
Track
Disc
A-B
ENTER
VCD/CD
* REPEAT A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the 'CLEAR' button or the
'REPEAT' button again.
• A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
ADVANCED
FUNCTIONS
Stereo
5 Press ENTER.
to normal play, press REPEAT again,
6 Tothenreturn
press the LEFT/RIGHT buttons to select Off.
Press ENTER, then press the PLAY/PAUSE button.
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT' button again.
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 38.
24
Downloaded From Disc-Player.com Samsung Manuals
25
Selecting the Subtitle Language
Changing the Camera Angle
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the ANGLE button
Using the SUBTITLE button
1 Press the SUBTITLE button.
the LEFT/RIGHT buttons to select the
2 Use
desired subtitle language.
3
ENG
On
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand
corner of the screen.
an ANGLE mark is shown, press the
1 When
ANGLE button, then an ANGLE select icon
Use the UP/DOWN buttons to determine
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
will appear at the upper left hand corner of
the screen.
ENG
Off
the LEFT/RIGHT buttons to select the
2 Use
desired screen angle.
ADVANCED
FUNCTIONS
turn off the display, press the ANGLE
3 Tobutton
again.
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 38.
26
Downloaded From Disc-Player.com Samsung Manuals
27
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
you press the I.REPLAY button, the current
1 Ifscene
moves backward about 10 seconds,
and plays back.
* Depending on the disc, the Instant Replay
function may not work.
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can
quickly find them at a later time.
Using the Bookmark Function (DVD/VCD)
play, press the BOOKMARK button on the
1 During
remote. The Bookmark icons will be displayed.
the LEFT/RIGHT buttons to move to the
2 Use
desired bookmark icon.
you reach the scene you want to mark,
3 When
press the ENTER button. The icon will change to
ENTER
a number (1, 2, or 3).
Using the Instant Skip function (DVD)
1 Press the I.SKIP button.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this function may not work.
Recalling a Marked Scene
play, press the BOOKMARK button
1 During
on the remote.
1 – –
ADVANCED
FUNCTIONS
Use this function to skip playback 10 seconds
ahead of the current scene.
the BOOKMARK button to turn off the
4 Press
display.
CLEAR
the LEFT/RIGHT buttons to select a
2 Use
marked scene.
the PLAY/PAUSE (
3 Press
to the marked scene.
) buttons to skip
Clearing a Bookmark
play, press the BOOKMARK button
1 During
on the remote.
the LEFT/RIGHT buttons to select the
2 Use
bookmark number you want to delete.
the CLEAR button to delete a
3 Press
bookmark number. Press the BOOKMARK
NOTE
• Up to three scenes may be marked
at a time.
• When in VCD 2.0 mode (MENU ON
mode), this function does not work.
• Depending on the disc, the
Bookmark function may not work.
button to turn off the display.
28
Downloaded From Disc-Player.com Samsung Manuals
29
Using the Zoom & 3D Sound Functions
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
Using the Zoom Function (DVD)
play or pause mode, press the ZOOM button
1 During
on the remote.
• If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
• To change the currently playing media, press the STOP ( )
button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
A zoom mark will be displayed on screen.
the UP/DOWN or LEFT/RIGHT buttons to select
2 Use
the part of the screen you want to zoom in on.
3 Press the ENTER button.
ENTER
MP3/WMA Play Function
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
- During VCD play, press ENTER to zoom in 2X/Normal in order.
the first song file is playing, the music
1 When
folder menu will appear on the right side of the
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
Using the 3D Sound Function
ENTER
Off
RETURN
MENU
ADVANCED
FUNCTIONS
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work.)
the UP/DOWN buttons to select the
2 Use
desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
Program/Random playback
1
During play, press the 3D button.
The 3D SOUND mark will be displayed on
screen.
the UP/DOWN buttons to turn the
2 Press
3D Sound feature On or Off.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
Press the MODE button to switch between the
RANDOM and PROGRAM modes. See page 32
for more information on these modes.
PROGRAM
RANDOM
• Depending on the disc, the Zoom and
3D Sound functions may not work.
NOTE
• Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
30
Downloaded From Disc-Player.com Samsung Manuals
31
MP3/WMA Play
CD-R MP3/WMA discs
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
32
Downloaded From Disc-Player.com Samsung Manuals
Program Play (CD/MP3/WMA)
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
PROGRAM. Press the ENTER button.
PROGRAM
RANDOM
All discs in the unit will be read first.
the LEFT/RIGHT/UP/DOWN buttons to
3 Use
select the first track to add to the program.
Press the ENTER button. The selection
numbers appear in the Program Order box.
PROGRAM 01
Program Order
Track
the PLAY/PAUSE (
) button.
4 Press
The disc will be played in programmed order.
01
05
09
13
02
06
10
14
03
07
11
15
------
04
08
12
16
------
------
------
• Use the DISC SKIP key to program another disc.
ENTER
RETURN
CLEAR
ADVANCED
FUNCTIONS
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
Program Play & Random Play
Random Play (CD/MP3/WMA)
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
RANDOM. Press the ENTER button.
PROGRAM
RANDOM
LEFT/RIGHT buttons to select all discs or
3 Press
disc. The disc(s) will be played in random order.
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed orders.
• Random play can only operate when the discs are the same type.
33
Picture CD Playback
Picture CD Playback
1 Open the disc tray.
2 Load the disc on the tray.
3 Close the tray.
CD-R JPEG Discs
- Load the disc with the labeled side up.
ENTER
- The tray closes and you should get a screen that looks like the
one to the right.
• Select JPEG in the menu to view a Photo CD.
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
button. (Press the PLAY/PAUSE (
) button if you want to play it in
the Slide Show mode.)
• To see the next 6 pictures, press the
• To see the previous 6 pictures, press the
•
ALBUM
PHOTO: 1 /215
button.
button.
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to display the menu again.
ENTER
PHOTO: 1 /215
PHOTO:
PHOT
O: 1 /215
ENTER RETURN
PHOTO: 1 /215
: Each time the ENTER button is pressed, the picture rotates
90 degrees clockwise.
•
: Each time the ENTER button is pressed, the picture is
enlarged up to 2X. (Normal ➝ 2X ➝ Normal)
•
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
•
: When this icon is selected and ENTER is pressed, the
pictures change automatically with about an 6 second interval.
•
: The pictures change automatically with about an 12 second
interval.
TIMER:
ADVANCED
FUNCTIONS
•
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
ENTER RETURN
•
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
• To change the currently playing media, press the STOP ( ) button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected
item will be played.
NOTE
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
34
Downloaded From Disc-Player.com Samsung Manuals
35
Using the Setup Menu
Setting Up the Language Features
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop mode, press the MENU button
on the remote. Select Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
DVD
Disc Menu
Title Menu
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options
Display Setup : Setup of the Display Options
Use to select which type of screen you want to watch
and several display options.
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
To make the setup screen disappear after setting up, press the
MENU button again.
NOTE
Depending on the disc, some Setup Menu selections may not work.
Setup
LANGUAGE
LANGU
GE SETUP
PLAYER
PLA
YER MENU LANGUAGE
LANGU GE
Player Menu
English
Français
Deutsch
Español
Italiano
Nederlands
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
ADVANCED
FUNCTIONS
the UP/DOWN buttons on the remote to access
2 Use
the different features.
3 Press the ENTER button to access the sub features.
Function
1
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Player Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
e.g) Setting up in English.
With the unit in Stop mode, press the MENU button.
Using the Disc Menu Language
This function changes the text language only on the disc
menu screens.
1
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Disc Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
Use the UP/DOWN buttons to select ‘English’.
5
6 Press the ENTER button.
e.g) Setting up in English.
With the unit in Stop mode, press the MENU button.
DISC MENU LANGUAGE
LANGU GE
Disc Menu
Others
- Select “Others” if the language you want is not listed.
- English is selected and the screen returns to SETUP menu.
36
Downloaded From Disc-Player.com Samsung Manuals
37
Setting Up the Language Features
Setting Up the Audio Options
Using the Audio Language
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
AUDIO
UDIO LANGUAGE
LANGU GE
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Audio Setup using UP/DOWN buttons, then
3 press
the RIGHT or ENTER button.
Audio
Original
Others
4
5 Press the UP/DOWN buttons to select ‘English’.
Select Audio using UP/DOWN buttons, then press
the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
Dolby Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio Select PCM
when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
AUDIO SETUP
Dolby Digital Output
: PCM
MPEG-2 Digital Out
DTS
: Off
: Off
Dynamic Compression
: On
PCM Down Sampling
: On
- Select “Others” if the language you want is not listed.
6
NOTE
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
MPEG-2 Digital Out
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
6 Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
38
Downloaded From Disc-Player.com Samsung Manuals
SUBTITLE LANGUAGE
LANGU GE
Automatic
1. PCM :
Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the Digital Audio Output.
ADVANCED
FUNCTIONS
Using the Subtitle Language
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
Select Subtitle using UP/DOWN buttons, then press
4 the
RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
Be sure to select the correct
Digital Output or no audio will be heard.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Subtitle
Others
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• How to make the SETUP menu
disappear or return to menu screen
during set up; Press RETURN or
LEFT button.
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
39
Setting Up the Display Options
Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Display Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
TV Aspect
Still Mode
DISPLAY SETUP
DISPLA
TV Aspect
: 4:3 L-Box
Still Mode
: Auto
Screen Massages
: On
Front Display
Black Level
NTSC Disc Output
: Auto Dim
: Off
: PAL 60Hz
Screen Messages
TV ASPECT
Front Display
4:3 Letter Box
Black Level
4:3 Pan Scan
TV Aspect
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of
the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display small text
clearer.
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
16:9 Wide
NTSC Disc Output
Screen Messages
Use to turn on-screen messages On or Off.
Black Level
Adjusts the brightness of the screen.(On/Off)
NOTE
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance.
If this is not the case, you can choose to leave “ PAL 60Hz” as is.
• How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
40
Downloaded From Disc-Player.com Samsung Manuals
41
CHANGING
SETUP MENU
Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Setting Up the Parental Control
Troubleshooting
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Parental Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
RIGHT or ENTER to select Yes if you want to
4 Use
use a password. The Enter Password screen
Before requesting service (troubleshooting), please check the following.
Problem
Page
No operations can be
performed with remote.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
P4
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
P7
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P12
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that
is out of range.
P15
PARENT
ARENTAL
AL SETUP
Use Password
: No
appears.
your password. The Re-enter Password
5 Enter
screen appears to confirm the password.
ENTER
RETURN
MENU
The
icon appears on
screen.
Enter your password again.
The Parental Control screen appears.
About the Rating Level ;
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
level. Press ENTER.
Action
CREATE
CREA
TE PASSW
PASSWORD
ORD
Enter Password
- - - -
P39
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
P36~37
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P37~42
- Use UP/DOWN to select the level( e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
Use Password.
The screen ratio cannot
be changed.
• The Screen Ratio is fixed on your DVDs.
P40~41
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P39
About the Change Password ;
Forgot password
• Press power on from a cold start with no disc in the unit. Press the
STOP ( ) and PLAY (
) buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
P42
0~9
RETURN
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
e.g) Setting up in LEVEL6.
REFERENCE
RATING
RA
TING LEVEL
NOTE
• How to make the SETUP menu disappear or return to
menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
42
Downloaded From Disc-Player.com Samsung Manuals
Level 8 Adult
Level 7
Level
Le
vel 6
Level
Le
vel 5
Level
Le
vel 4
Level
Le
vel 3
Level
Le
vel 2
Level
Le
vel 1 Kids Safe
Saf
If you experience other
problems.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
43
Specifications
General
Power Requirements
AC 110-240V, 50/60 Hz
Power Consumption
12 W
Weight
4.3 Kg
Dimensions
Disc
430mm (W) X 400mm (D) X 68.5mm (H)
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
DVD
(DIGITAL VERSATILE DISC)
Reading Speed : 3.49 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
Video
Output
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
S-VIDEO
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
2 channel
*Frequency Response
Audio
Output
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
44
Downloaded From Disc-Player.com Samsung Manuals