CCTV iDVR-RT16 User guide

RASplus (Remote

Administration System)

Digital Video Recorder Software

User Guide

Document 800-05056 – Rev C – 11/09

B

C

Revisions

Issue

A

Date

09/09

09/09

11/09

Revisions

New document based on 900.0857 rev 6.00 with updates for V1.4.4 to include HRXDS.

On

page 12 , updated p/n of HRSD user guide and corrected HRXDS16

model name.

Updated back cover

2

Contents

Contents

About This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Overview of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Package Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2

3

4

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Installing RASplus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

RASplus Viewing Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

RASplus Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Remote Sites Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Favorite Sites Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Status View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Search View Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Map Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Color, PTZ, and Alarm Out Control Panels . . . . . . . . . . . . . . . . . . . 31

Image Processing Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Emergency Event View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Watch Event View Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Report View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

RASplus Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

View Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Remote Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Favorite Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Sequence Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Record Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Layout Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Live Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Screen Layout and Frame Layout . . . . . . . . . . . . . . . . . . . . . . . . 60

Document 800-05056 Rev C

11/09

3

Contents

Audio Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Sequence Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Playback and Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Search View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Search Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Additional Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Additional Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Panic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Status View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Function Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Status Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Appendix A Video Clips Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

MiniBank Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Clip Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Appendix B DVR Name Service (DVRNS) . . . . . . . . . . . . . . . . . . . . . . . . . 89

System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Appendix C Map Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Background Image Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Option Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Device Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Link Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

4

Figures

Figures

Figure 3-6

Figure 3-7

Figure 3-8

Figure 3-9

Figure 3-10

Figure 3-11

Figure 3-12

Figure 3-13

Figure 3-14

Figure 3-15

Figure 3-16

Figure 3-17

Figure 3-18

Figure 3-19

Figure 3-20

Figure 3-21

Figure 3-22

Figure 2-1

Figure 2-2

Figure 2-3

Figure 2-4

Figure 2-5

Figure 2-6

Figure 2-7

Figure 2-8

Figure 2-9

Figure 2-10

Figure 2-11

Figure 3-1

Figure 3-2

Figure 3-3

Figure 3-4

Figure 3-5


11/09

Select Installation Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Welcome to RASplus Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . 16

RASplus Ready to Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Run RASplus Automatically Option . . . . . . . . . . . . . . . . . . . . . . . . . 17

RASplus Language Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

RASplus Exit Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Welcome to MSXML Setup Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . 19

MSXML End-User License Agreement . . . . . . . . . . . . . . . . . . . . . . . . 19

MSXML Customer Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

MSXML Choose Setup Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

MSXML Exit Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

RASplus Viewing Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Four Position Arrow Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Four Position Arrow with Tab Icon . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Remote Sites Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Favorite Sites Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Status View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Search View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Map Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Map Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Map Popup Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Color, PTZ and Alarm Out Control Panels . . . . . . . . . . . . . . . . . . . . . . 31

Image Processing Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Emergency Event View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Watch Event View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Report View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

RASplus Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setup Screen — System 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Drawing Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Recording Mode Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Setup Screen — System 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Event Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

5

Figures

Figure 3-39

Figure 3-40

Figure 3-41

Figure 3-42

Figure 3-43

Figure 3-44

Figure 3-45

Figure 4-1

Figure 4-2

Figure 4-3

Figure 4-4

Figure 4-5

Figure 4-6

Figure 4-7

Figure 4-8

Figure 4-9

Figure 3-23

Figure 3-24

Figure 3-25

Figure 3-26

Figure 3-27

Figure 3-28

Figure 3-29

Figure 3-30

Figure 3-31

Figure 3-32

Figure 3-33

Figure 3-34

Figure 3-35

Figure 3-36

Figure 3-37

Figure 3-38

Figure 4-10

Figure 4-11

Figure 4-12

Figure 4-13

Figure 4-14

Figure 4-15

Figure 4-16

Figure 4-17

Figure 4-18

Figure 4-19

Figure 4-20

6

Screen Setup — Remote Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Add Site Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setup Screen — Favorite Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Setup Screen — Sequence Sites . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Batch Job Setup Screen — Upgrade . . . . . . . . . . . . . . . . . . . . . . . . 46

Batch Job Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Log Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

View Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Remote Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Remote System/Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Favorite Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Sequence Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Record Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Layout Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Frame Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Layout Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Layout Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

RASplus Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

RASplus Controls Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Screen Layout Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Frame Layout Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Watch Search Screen Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Screen Layout Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Audio Communication Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Select Audio Channel Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Color Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

PTZ Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Alarm Out Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Watch Search Screen Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Search View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Time-Lapse Search Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Selecting a Video Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Event Search Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Event Search Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Event Search Text-In Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Text-In Event Search Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Search Data Source Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Screen Format Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Image Processing Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Save Type Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Save As Self-Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Figures

Figure 4-21

Figure 4-22

Figure 4-23

Figure A-1

Figure A-2

Figure A-3

Figure A-4

Figure B-1

Figure C-1

Figure C-2

Figure C-3

Figure C-4

Figure C-5

Figure C-6

Figure C-7

Figure C-8

Save As Video Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Camera Popup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Status View Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

MiniBank Self Player User Interface . . . . . . . . . . . . . . . . . . . . . . . . . 82

Clip Player User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Clip Player Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Save Clip Images Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

DVRNS Server System Configuration . . . . . . . . . . . . . . . . . . . . . . . . 89

Map Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Property [Canvas] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Option Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Site Information Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Site Item Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Popup Dwell Time Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Status Color Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Name Table Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Figure C-9 Property [Camera/AlarmOut/AlarmIn] Tab . . . . . . . . . . . . . . . . . . . . . . 95

Figure C-10 Event [Camera] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Figure C-11 Event [AlarmOut] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Figure C-12 Event [AlarmIn] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Figure C-13 Property [Link] Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98


11/09

7

Figures

8

Tables

Tables

Table 4-1

Table A-1

Table 4-5

Table C-1

Table C-2

Camera Popup Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Clip Player Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Save Clip Images Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Property Tab Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Property Tab Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 98


11/09

9

Tables

10

About This Document

This document introduces the Remote Administration System Plus (RASplus) software designed for the digital video recorder (DVR) and describes the procedures for operating and maintaining the software.

Overview of Contents

This document contains the following chapters and appendixes:

•

Chapter 1, Overview

, describes the Remote Administration System and lists its features.

•

Chapter 2, Installation , provides the procedures necessary to install RASplus.

•

Chapter 3, Configuration

, covers the configurations and settings available with

RASplus.

•

Chapter 4, Operation

, provides the procedures necessary for RASplus operation.

•

Appendix A, Video Clips Review

, covers the functions and features of the MiniBank

Self Player program.

•

Appendix B, DVR Name Service (DVRNS)

, explains how to set up a remote DVR using a DVRNS server.

•

Appendix C, Map Editor , describes the map editor and its features.

Related Documents

For more information about topics that are relevant to the subject of this manual, see the documents listed below.

Document title

HRXD9, HRXD16 DVR User Guide

DVRNS Server for DVRs User Guide

Part number

900.0856

800-05057


11/09

11

12

Document title(cont’d)

HRSD4 DVR User Guide

HRSD8, HRSD16 DVR User Guide

HRXDS8, HRXDS16 DVR User Guide

Part number

800-00919

800-03650

800-04559

Overview

1

Overview

This manual describes the installation and operation of RASplus (Remote

Administration System Plus) software, which is designed to be used with remote digital video recorders (DVRs).

Features

RASplus is an integrated software program that controls system management, video monitoring, video recording, and image playback of multiple remotely connected sites.

RASplus offers the following features:

• Checks and reports status of remote DVRs

• Notification of events detected at remote sites

• Remote monitoring of live camera images

• One-touch panic recording of currently displayed images

• Time-lapse and event searching of recorded images

• Remote software upgrades and system programming

• View system and event log information of remote DVRs

• Remote monitoring of multiple remote sites using 3D maps

• Connect up to 64 remote sites (up to 16 remote sites for remote search) at a time

Note This product includes software developed by the OpenSSL

Project for use in the OpenSSL Toolkit ( http://openssl.org/ ).


11/09

13

Overview

Product Information

Package Components

• RASplus User Guide (this document)

• Multilingual RASplus Software and User Guide (RASplus CD-ROM)

• DVRNS Server Software and User Guide (RASplus CD-ROM)

System Requirements

Playing back digital video puts a high demand on your computer system. To use the

RASplus video monitoring and playback functions, your personal computer (PC) must meet the minimum system requirements listed below:

• Operating System: Microsoft Windows XP x86 (32 Bit) or Microsoft Windows Vista x86 (32 Bit)

• CPU: Intel Pentium IV (Celeron) 2.4 GHz or faster

• RAM: 512 MB or higher

• VGA: AGP, Video RAM 8 MB or higher (1024x768, 24 bpp or higher)

14

Installation

2

Installation

Installing RASplus

Caution If an older version of RASplus has already been installed on your computer, you should uninstall the older version before installing the new one.

Note In the Start menu in Windows, go to your Control Panel.

Double-click Power Options to open the Management

Properties dialog box. Under the Power Schemes tab, set both

Turn off monitor and Turn off hard disks to Never.

Note The User Account Control window might appear when using the Microsoft Windows Vista operating system. Click Allow and install RASplus software following the instructions.

1.

Insert the installation CD.

2.

Run the Setup.exe file.


11/09

15

Installation

3.

The .NET Framework and the Visual C++ Runtime Libraries are installed automatically.

Note Installing .NET Framework and the Visual C++ Runtime

Libraries is required for RASplus to operate properly. This installation step will be skipped if they are already installed on your computer.

4.

Designate the folder path to install RASplus and select the user(s) who can use

RASplus, then click Next.

Figure 2-1 Select Installation Folder

5.

When

Figure 2-2

appears, click Next.

Figure 2-2 Welcome to RASplus Setup Wizard

16

Installation

6.

Click Next.

Figure 2-3 RASplus Ready to Install

7.

Select whether or not to run RASplus automatically when logging onto Windows, and then click Next.

Figure 2-4 Run RASplus Automatically Option

8.

Set the language option by selecting either Select language when starting

RASplus or Always start RASplus using the language below. If you select to

Always start RASplus using the language below, select the desired startup language from the list of available languages and then click OK.


11/09

17

Installation

Figure 2-5 RASplus Language Option

Note To properly display the selected language, your PC’s operating system should be set up to support the selected language.

Note To change RASplus’ language after selecting the Always start

RASplus using the language below option, the RASplus software must be re-installed.

9.

When

Figure 2-6 appears after finishing the RASplus installation, select the Install

MSXML check box and click Finish. Installing the MSXML application is required for RASplus to initiate.

Figure 2-6 RASplus Exit Setup

18

10. Click Next.

Installation

Figure 2-7 Welcome to MSXML Setup Wizard

11. Select I accept the terms in the License Agreement, and click Next.

Figure 2-8 MSXML End-User License Agreement

12. Enter a User Name and Organization, and click Next.

Figure 2-9 MSXML Customer Information


11/09

19

Installation

13. Select Install Now.

Figure 2-10 MSXML Choose Setup Type

14. Click Finish to complete the MSXML installation.

Figure 2-11 MSXML Exit Setup

20

Configuration

3

Configuration

After installing the RASplus software, the RASplus shortcut icon ( ) is on your desktop. Double-click the icon to run the RASplus program. The RASplus program consists of the viewing screen, 12 docking panels, menus and toolbar.

Note Some panels do not display on the screen in the default frame layout. To display those panels, go to the View menu at the top of the screen, then select each panel from the menu.


11/09

21

Configuration

RASplus Viewing Screen

Figure 3-1 RASplus Viewing Screen

22

Configuration

The Viewing screen displays images from selected cameras in live monitoring or playback mode. RASplus provides various multi-screen layouts; single-screen, quad,

1+7, 3x3, 4x4, 5x5, 1+32, 6x6, 7x7, 8x8 and full-screen.

Note In the event that screen updates are slow when using the

Microsoft Windows Vista operating system, try disabling the

AutoTuning capability of your computer. This might resolve the problem.

Disabling Auto Tuning on your Computer

Run the Command prompt with elevated administrator permissions.

1.

Go to the Start menu

➤ Accessories ➤ Command Prompt.

2.

Right-click the mouse button and select the Run as administrator option.

3.

Enter netsh int tcp set global autotuninglevel=disable and click

Ok.

4.

Restart your computer to apply the changes.

Enabling Auto Tuning on your Computer

Run the Command prompt with elevated administrator permissions.


11/09

23

Configuration

1.

Go to the Start menu ➤ Accessories ➤ Command Prompt.

2.

Right-click the mouse button and select the Run as administrator option.

3.

Enter netsh int tcp set global autotuninglevel=normal.

4.

Restart your computer to apply the changes.

RASplus Panel

RASplus has many powerful tools that can be used to streamline your work. Most of the tools are located on 12 docking panels that can be placed on the screen where they are most convenient. You can keep your screen free of clutter by displaying only the panels you use most frequently.

Click in the upper right corner of a panel to enable the auto-hide feature. Tabs for auto-hidden panels are displayed on the side of the screen.

Scrolling over an auto-hidden panel tab will cause the panel to fly out. You can cause the panel to lock back into its original display position by clicking .

Click to hide the panel without a tab. Hidden panels can be displayed by selecting them from the drop-down menus.

Panels can be resized, moved, and combined with other panels to create a workspace that fits your needs. To resize a panel:

1.

Scroll the cursor over the edge of the panel until the cursor changes to or .

2.

Then click the left mouse button and drag the panel border to enlarge or reduce its size.

To move a panel to a different position on the screen:

1.

Scroll the cursor over the title bar of the panel until it changes to . Once you click and drag, position arrows will display on the screen.

The four position arrows along the outer edges allow you to place the panel along the given edge independent of the other panels.

2.

When you drag the panel over a position arrow, a transparent blue box will display showing the new panel position.

3.

If you are satisfied with the position, release the left mouse button and the panel will move to its new position.

You can also move a panel so that it is associated with another panel:

1.

Drag the panel over the panel you want it associated with, and the icon with four position arrows will center over that panel.

24

Configuration

Figure 3-2 Four Position Arrow Icon

2.

Scrolling the cursor over the icon arrows will cause a transparent blue box to display where the panel will be located.

3.

If you are satisfied with the position, release the left mouse button and the panel moves to its new position.

It is possible to combine panels so that they take up less space on the screen.

Combined panels have a row of tabs across the bottom. Clicking a tab brings that panel to the foreground. To combine panels:

1.

Move the cursor to the title bar of the panel you want to move.

2.

Click and drag the panel onto the panel you want to combine it with. If they can be combined, the four-position arrow icon will have a tab symbol in the center.

3.

Drag the cursor over the tab symbol , and a new tab appears on the panel.

4.

Release the mouse button to combine the panels.

Figure 3-3 Four Position Arrow with Tab Icon

The layout possibilities are virtually unlimited. With a little experimentation you will be able to lay out the RASplus screen so that it best meets your requirements.

Remote Sites Panel

Figure 3-4 Remote Sites Panel

The Remote Sites panel displays a list of remote sites registered during RASplus

System setup and a list of installed cameras at each remote site. To find the remote site easily in the Remote Sites list, enter the site name in the query box, and click .


11/09

25

Configuration

Click to register the remote site.

Click to remove the selected remote site from the list

Click to edit the site information of the selected remote site.

To connect to a remote site:

1.

Select the site or camera you want to connect to from the list.

2.

Drag and drop the site or camera in the desired position on the screen or the

Status View panel.

3.

The screen displays images from selected cameras, and the Status View panel displays the system status information of the connected remote site.

For an alternate way to connect to the Status View Panel:

1.

Select a site from the list and click the right mouse button.

2.

Select Connect Status View from the popup menu.

This popup menu initiates the remote menu including Remote Setup, Remote

System Log, and Remote Event Log. See

Remote Menu , page 50 , for more

details.

Favorite Sites Panel

Figure 3-5 Favorite Sites Panel

The Favorite Sites panel displays the list of Favorite sites registered during RASplus

System setup. Selecting the Favorite site you want to connect to from the list and then dragging and dropping it in the desired position on the screen automatically connects all the remote sites registered in the Favorite site.

26

Configuration

Status View Panel

Figure 3-6 Status View Panel

The Status View panel displays the event, alarm out, system check and recording status information of the connected remote site in real-time. To connect to the remote site, select the site or camera you want to connect to from the Remote Site or Map panel and then drag and drop it into the Status View panel. See

Status View , page 78 , for more

information about the Status View panel.


11/09

27

Configuration

Search View Panel

Figure 3-7 Search View Panel

Map Panel

Use the Search View panel to perform time-lapse or event searching of recorded data

on the remote DVR. See Search Mode , page 66

, for more information.

Figure 3-8 Map Panel

28

The Map panel allows for efficient monitoring of the remote sites by displaying a three-dimensional map of the selectable site:

1.

Click the right mouse button on the map panel to select the map image file (.rmp) you want to monitor from the list. The selected map image displays in the Map panel and the sites registered on the map image file will be connected.

2.

When the selected map is linked with sub-maps, click the linked image to move to the sub-map.

Configuration

Figure 3-9 Map Image

Note See

Appendix C, Map Editor

for instructions for editing maps.

The Map panel pops up another screen when alarm-in, motion or video loss events are detected or when you click the device icon according to the Map Editor settings.

To change the popup screen location and/or size:

• Click the left mouse button on the screen and drag it to where you want it located.

•

Click the right mouse button on the popup screen to display Figure 3-10

. Select one of the following options:


11/09

29

Configuration

Figure 3-10 Map Popup Options Menu

• x0.25 to x2: Sets the desired size of the Map popup screen.

• Full Screen: Enters the full-screen mode of the Map popup screen.

• Transparency...: Adjusts the transparency of the popup screen.

• PTZ Set...: Controls pan, tilt and zoom of the selected PTZ camera.

• Disable Time Out: Continues to display the popup screen when events are detected by disabling the Dwell Time Out.

• Original Ratio: Displays the Map popup screen in its original aspect ratio.

• Antialiasing Screen: Enhances image display quality on the popup screen by eliminating staircase (aliasing) effects on the enlarged image.

• User Set…: Sets the mode of the current popup screens displayed on the monitor. For example, the monitor displays the current popup screen with enough frames for 16 cameras when you select 4x4.

Note See

Device Setting on page 95

for more information about the popup function.

Connecting to a Remote Site

To connect to the remote site:

1.

Select the device you want to connect to from the Map panel.

2.

Drag and drop it in the desired position on the screen or the Status View panel.

30

Configuration

Checking the Device Status

Place the mouse cursor on the device on the map to display the device status. When the device detects any event or the device is not working properly, the following status icons appear (maximum of 4).

Unplugged

Event off

Irregular

Video Loss

Motion

Alarm In

Alarm Out

Note The device status displays as Irregular based on the system check settings and as Video Loss, Motion, Alarm, and/or Alarm

Out according to the event detection settings on the remote

DVR.

Watch Event View

1.

Click the right mouse button on the Map panel to open a text menu screen.

2.

Select Watch Event View from the menu to display the event information for the connected remote sites.

3.

Select Close to disconnect the current connection on the Map panel.

Color, PTZ, and Alarm Out Control Panels

These three panels in Figure 3-11 allow color control, PTZ control and alarm out control

while live monitoring a remote site. See Live Monitoring on page 59

for more details.

Figure 3-11 Color, PTZ and Alarm Out Control Panels


11/09

31

Configuration

Image Processing Panel

Figure 3-12 Image Processing Panel

The Image Processing panel allows you to enhance played back images. See

Playback and Search on page 64

for more details.

Emergency Event View Panel

Figure 3-13 Emergency Event View Panel

32

The Emergency Event View panel displays a list of events (preset for notification at the remote site) that were called from individual remote sites (LAN connection only).


Select an event from the list, then drag and drop it in the desired position on the Watch or Search screen to connect to the remote site. A check mark appears in the box at left.

Viewing Tooltips

Select an event or site from the list, then click the right mouse button. A tooltip appears which contains the emergency event instructions from the remote site.

Configuration

Note The Emergency Event View function is available only for the remote sites that were set to notify the RASplus system when configuring each event setup.

Watch Event View Panel

Figure 3-14 Watch Event View Panel

The Watch Event View panel displays events detected at individual remote sites while

RASplus is in the live monitoring mode. The description of event icons is as follows:

Alarm In On

Alarm In Off

Motion Detection

Video Loss

Text In v

Recorder Bad

Disk S.M.A.R.T.

Disk Bad

Disk Full

Disk Temperature

Panic Recording On

Panic Recording Off

Fan Error On

Fan Error Off

Note Some event icons might not be supported, depending on the specifications and version of the remote DVR.


11/09

33

Configuration

Report View Panel

Figure 3-15 Report View Panel

The Report View panel displays the system status information of remote sites. RASplus checks the remote site and reports system status. Report Setup must be configured during RASplus System setup for this feature to function. See

System Menu on page 35

for more details.

Click to reload the data.

Click to print the report.

Note Some report options may not be supported, depending on the specifications of the remote DVR.

RASplus Menus

Figure 3-16 RASplus Menu Bar

34

Configuration

System Menu

Figure 3-17 System Menu

Setup

The Setup screen allows setting up the system operation and remote site configuration.

System 1 Tab

Set up the date/time format for RASplus, display options, and panic recording function.

Figure 3-18 Setup Screen — System 1


11/09

35

Configuration

Date/Time Format Select the date/time format.

Display Option Set up the screen display, drag & drop popup option, display acceleration and OSD.

• Screen Option: Select Watch Screen to use RASplus for live monitoring only,

Search Screen to use RASplus for searching only, or Watch and Search Screen to use RASplus for both live monitoring and searching. Select Hide the Message

Box to hide the message box that displays the status information about RASplus and remote site connections.

• Drag & Drop Popup Option: Select which mouse button will be used when displaying popup menu screens from Use Left Mouse Button, Use Right Mouse

Button or both (Watch and Search Screen mode only).

• Drawing Mode Setup...: Set up the display options for the screen.

Figure 3-19 Drawing Mode Screen

36

• Normal Drawing: Depends on the CPU performance of your PC and displays images in low speed (Dib Draw Mode).

• Fast Drawing (Default): Displays images in normal speed (Direct Draw

Mode).

• Fast Drawing (YUV420/RGB32): Depends on the performance of the video card installed in your PC and displays images in high speed (Direct Draw

Mode).

• Overlay Drawing (YUV420/RGB32/RGB565): Displays images in high speed (Direct Draw Overlay Mode).

• Deinterlacing: Enhances image display quality for interlaced video by eliminating horizontal scan lines and noise in areas with motion.

• Aspect Ratio: Enhances the image display quality on the screen by eliminating the stair-stepping (aliasing) effects in the enlarged image.

Select Fit to Screen to fit the display images to the screen size.

Select Original Ratio to keep the ratio of the display images while fitting them within the screen size.

• Anti-Aliasing Screen: When activated, the anti-aliasing screen option enhances the image display quality by eliminating the stair-stepping

(aliasing) effects in the enlarged image.

Configuration

Note If the image cannot be displayed properly because of your PC’s specifications, lower the drawing mode level.

Note While in the Fast Drawing mode, the drawing speed might decrease when the RASplus screen is not located on the primary monitor.

Note The Overlay Drawing mode may not be supported, depending on the type of video card installed in your PC. Video cards with an ATI chipset are recommended.

Note When using dual monitors, select Overlay Drawing to display the image only on the primary monitor.

Note With some computers, the image drawing speed might decrease while using a deinterlace filter, depending on the type of deinterlace filter.

Note With some computers, the image drawing speed might decrease when the Anti-Aliasing Screen option is selected.

• OSD Setup…: Select options (Title, Time Info, Date Info, Text-In and Overlay

Text-In Data) to display on the screen.

• Load Default Map at Startup: Select whether or not the user-defined map file is loaded automatically when RASplus starts, and designate the path of the map file

(.rmp) to load.

Recording Setup Set up the use (On or Off) of the panic recording function and overwriting option of the recording folder (On or Off). When using the panic recording function and overwriting option, RASplus continues recording when the hard disk drive


11/09

37

Configuration is full by overwriting the oldest video. Designate a recording folder path and set the recording folder size from 640 MB to 2048 MB. Capacity shows the remaining space of the recording folder.

Note The recording folder size cannot be changed once it has been set. Designate another recording folder path if you want to expand the recording space.

• Recording Mode Setup...: Set up the panic recording mode.

Figure 3-20 Recording Mode Setup Screen

• Visible Watch Camera: Records camera channels currently displayed on the

Watch screen.

• User Assignment Setup: Record camera channels assigned by the user on the Watch screen.

• Camera Range Setup: Records camera channels within preset channel range. Select the boxes beside Camera and adjust camera range up to 16 channels.

Note Panic recording will NOT be made for the cameras not currently displayed on the Watch screen even though they are set up to be recorded.

Note When selecting the User Assignment Setup mode, the user can manually assign camera channels to record on the Watch screen. Select a camera on the Watch screen and click the right mouse button, then select Select Record Camera in the text menu screen. The gray icon displays on the selected camera screen.

38

Configuration

System 2 Tab

Set up the modem connection information for remote access, system password, network option, report function and DVRNS server.

Figure 3-21 Setup Screen — System 2

Dial-up Network Select Use Modem if you want to use a modem for remote access.

Security Option Designate whether password confirmation is required Before Setup,

Before Startup, or Before Shutdown of RASplus. Click Change to change the password.

Network Option Set up the IP port number (from 8000 to 12000) that is used for network connection when receiving a callback message from a remote site.

Note The IP port number you enter should match the value set during the network setup of the remote DVR.

Event Setup Enter the number of emergency events that are displayed in the

Emergency Event panel. Set up RASplus to sound when events are detected by selecting events from the list and designating the sound file (.wave) path. You can set up a different sound for each type of event.


11/09

39

Configuration

Figure 3-22 Event Setup Screen

Report Setup Set up the use (On or Off) and check intervals (from 1 to 24 hours) of the report function. When using the report function, RASplus checks on the remote site based on the user-defined interval and reports system status.

DVR Name Service Set up the IP address and port number (from 10000 to 12000) of the DVRNS (DVR Name Service) server. The IP address and port number you enter should match the values set during the DVRNS setup of the remote DVR you want to connect to.

Note The DVRNS server cannot be configured when using modem connections. See

Appendix B, DVR Name Service (DVRNS)

for more details on DVR Name Service.

Remote Sites Tab

Configures the connection list for remote access.

40

Configuration

Figure 3-23 Screen Setup — Remote Sites

Add Click Add and enter the information about the remote site you want to add.

Figure 3-24 Add Site Screen

• Reference Group: The site should be assigned to a Reference Group for effective management of multiple remote sites. Click Add to create a new reference group.

• Remote Site Setup: Enter a site name and the IP address of the remote site

(modem telephone number for dial-up connections), acquired from your network administrator. Click Port to set up the IP port number of each program. The IP port number should match the value set during the network setup of the remote

DVR. If the remote system version does not allow you to set the IP port numbers,


11/09

41

Configuration use the following values: 8200 for Admin, 8016 for Watch, 10019 for Search, and 8116 for Audio. Select the number of cameras at the remote site. For example, selecting 8 from the list when registering a 16-channel DVR displays video of the first 8 channels on the screen.

Note When using DVRNS server, place a checkmark in the Use

DVRNS box. The IP Address field will be changed to DVR Name, and then you can enter the name of the remote site registered on the DVRNS server. The DVR name you enter should match the name set during the DVRNS setup of the remote DVR.

• Login Setup: Enter the user ID and password of the remote site to be accessed. If you have entered a user ID and a password, the site will be connected automatically without a dialog box requesting a password. Select No Password for remote systems that do not require a password (for example, guest login).

Note Up to 32 characters may be used for the site names, telephone numbers and user IDs. Up to 8 characters may be used for passwords.

Emergency Event Instruction Enter the message that displays when emergency events are called in from the remote site. The Emergency Event Instruction can be checked by clicking the right mouse button after selecting the event or the site from the list in the Emergency Event panel.

Change Select the group or site you want to edit and click Change, or double-click the group or the site to change. Edit the site information.

Remove Select the group or site you want to remove and click Remove.

List All Displays all registered remote sites.

Find Enter the group or site name to search for and click Find to display the matching groups or sites in the list.

Favorite Sites Tab

The Favorite Site is a user-defined connection list that combines more than one remote site so that multiple sites can be monitored at the same time with a single connection.

Add a new Favorite Site and define it by dragging and dropping sites and/or cameras to the Favorites map. Up to 64 cameras can be monitored at a time when each camera is assigned to its own position on the Favorites map.

42

Configuration

Figure 3-25 Setup Screen — Favorite Sites

Site Name Select a registered Favorite site from the drop-down list.

Add Adds a new Favorite site.

Change Select the Favorite site to change from the Site Name list and click Change.

Then change the site name or screen layout.

Remove Select the Favorite site to remove from the Site Name list and click Remove.

Connect Favorite Site at Startup Select whether or not your favorite site is automatically connected when RASplus starts.

Remove Selected Camera Removes selected cameras from the Favorites map.

Cameras can also be removed by clicking the right mouse button after selecting the camera.

Remove All Cameras Removes all cameras from the Favorites map.


11/09

43

Configuration

Note Cameras can be selected by clicking the left mouse button on the camera in the Favorites map. Selected cameras will be outlined in red. Clicking the left mouse button on the camera while holding the Ctrl key toggles camera selection On and Off.

Multiple cameras can be selected by clicking the left mouse button while holding the Shift key.

Note [W] (Watch Screen) and [S] (Search Screen) displayed to the left of the camera number indicates the display option of each camera. The display option can be selected when registering a

Favorite site. Selecting the remote site from the Group List and dragging and dropping it to the Favorites map using the right or left mouse buttons (this is user-defined and must be set during system setup) displays the text menu screen. Select the desired displays option between Watch Screen and Search Screen. If you do not select the display option, Watch Screen display will be assigned to all cameras of the registered Favorite site by default.

Note Click on the toolbar to save the current screen layout of the

Watch screen or Search screen directly to the Favorite site.

Note The Favorite Site list does not function with modem connections.

Sequence Site Tab

Configure the sequenced sites. RASplus connects to the registered sites sequentially allowing connection to more than one remote site.

44

Configuration

Figure 3-26 Setup Screen — Sequence Sites

Sequence Dwell Time Adjust sequence intervals (from 5 seconds to 1 hour) for each connection.

Add Select the site to add from the Group List and click Add.

Add All Adds all sites in the Group List to the Auto Sequencing list.

Remove Select the site to remove from the Auto Sequencing list and click Remove.

Remove All Removes all sites in the Auto Sequencing list.

Note The Auto Sequencing list is not valid with modem connections.

Load Setup File

Allows applying the settings of the System Setup menu saved as an .xml file format to the RASplus system. Click on the toolbar.


11/09

45

Configuration

Save Setup File

Saves the current settings of the System Setup menu as an .xml file format. Click on the toolbar.

Batch Job Setup

Multiple DVRs can be upgraded or set up using the Batch Job Setup screen.

Upgrade Tab

Sets up the remote upgrade job for remote sites.

1.

Select the remote sites to upgrade from the Group List, and add them to the

Upgrade Sites list by clicking Add.

2.

Click Upgrade Now to initiate the remote upgrade job for registered Upgrade

Sites.

Figure 3-27 Batch Job Setup Screen — Upgrade

46


Add All Adds all sites in the Group List to the Upgrade Sites list.

Remove Select the site to remove from the Upgrade Sites list and click Remove.

Remove All Removes all sites in the Upgrade Sites list.

Upgrade Now Upgrades the software on the listed Upgrade Sites.

Configuration

Setup Tab

Sets up the remote setup job for remote sites.

1.

Select a remote site to set up from the Group List, and add it to the Setup Sites list by clicking Add.

2.

Click Setup Now to initiate the remote setup job for registered Setup Sites.

Figure 3-28 Batch Job Setup Screen


Remove All Removes a site in the Setup Sites list.

Setup Now Performs the setup on the listed Setup Sites.

Disconnect

Disconnects all current connections. You can also click on the toolbar.


11/09

47

Configuration

View Log

Displays log information saved in the RASplus system.

Note You can also display the Log Viewer screen by selecting Log

Viewer from the RASplus options under the Start menu in

Windows.

Log Viewer (View Log)

Displays the type of log and the number of log entries.

Select a log type from the list to display all entries of that log type.

Search for the desired log by setting up a search filter.

Figure 3-29 Log Setup Screen

48

Setting up a Search Filter

Search Time Set the time range to search within. Select Current Time and the desired period to search for logs from the current time to as far back as the selected timespan.

Select Detail Time to set up a specific start and end time for the search.

Configuration

Detail Condition Set the desired search parameters. Select a filter target from the second list, and select a filter from the third list (enter a filter in the text box). Then select a comparison operator from the last list:

• Equal to search for logs that satisfy the condition (case sensitive)

• Not Equal to search for logs excluding logs that satisfy the condition

• Like to search for logs that include the entered keyword

• Not Like to search for logs that do not include the entered keyword

Click Add Condition to add more search conditions:

• Select And to search for logs that satisfy all conditions.

• Select Or to search for logs that satisfy at least one of the conditions.

Search Displays log entries that satisfy the current search filter.

Reset Resets the search filter.

File

• Log File Open: Opens a log file (.db).

• Delete Log: Deletes logs older than a certain age.

• Save As…: Saves the log information in the list as a text or CVS file.

• Print: Prints the log information.

• Close: Closes the Log viewer screen.

Exit

Disconnects all current connections and exits the RASplus program.

View Menu

Figure 3-30 View Menu

Displays or hides the selected toolbar and panels.


11/09

49

Configuration

Remote Menu

Figure 3-31 Remote Menu

Note The Remote menu can also be activated by clicking the right mouse button after selecting the remote site on the Remote Sites panel.

Remote Setup

Remote Setup can be used to change the setup of a remote DVR. Select the remote site on the Remote Sites panel, initiate the Remote Setup menu, and the setup screen displays.

Note Refer to the user manual for the remote DVR for more details on system setup.

Remote System Log/Remote Event Log

These selections display the system log and event log information of a remote DVR. Set the time range of interest and click Find. The log entries within the time range display on the list. 100 results can be displayed in a single page. Click the Move buttons to display additional results.

50

Configuration

Figure 3-32 Remote System/Event Log

From Adjust the search starting date and time. When First is selected, it will search from the first logged item.

To Adjust the search ending date and time. When Last is selected, it will search to the last log.

Find Displays remote log entries within the selected time period.

Print... Prints the log information.

Save... Saves the log information as a text or CSV file (UTF-8 encoded).

Move Buttons Moves to the first page ( ), previous page ( ), next page ( ) or last page ( ). You can also go directly to a log page by clicking the corresponding page number.

Close Closes the Log dialog box.

Favorite Menu

Note The Favorite menu can also be accessed using the toolbar controls.


11/09

51

Configuration

Figure 3-33 Favorite Menu

Saves the current screen layout directly to the Favorite site.

Sequence Menu

Note The Sequence menu can also be accessed using the toolbar controls.

Figure 3-34 Sequence Menu

Starts or ends auto sequencing (Watch Screen only).

Record Menu

Note The Record menu can also be accessed using the toolbar controls.

Figure 3-35 Record Menu

Starts or ends panic recording. Selecting Record Play initiates the Record Player program and plays recorded video. See

Panic Recording , page 77 , for more details.

52

Configuration

Image Menu

Figure 3-36 Image Menu

Note The Image menu can also be accessed using the Image

Processing panel controls and the toolbar controls.

Save Saves the current image as a bitmap or JPEG file.

Print Prints the current image.

Note See

Live Monitoring on page 59 , and

Playback and Search on page 64 , for more details.

Layout Menu

Figure 3-37 Layout Menu

Note The Layout menu can also be accessed using the toolbar controls.


11/09

53

Configuration

Screen Layout

Figure 3-38 Screen Layout

Layout Change Select the desired screen layout using the Layout Change menu.

When changing the screen layout, the selected camera on the current screen will be located in the first cell of the new layout.

Previous/Next Cameras When in one of the multi-view formats, selecting Previous

Cameras or Next Cameras will move to the previous or next page. In other words, when viewing Cameras 1 to 4 in the quad format, selecting Previous Cameras will display Cameras 61 to 64 and selecting Next Cameras will display Cameras 5 to 8.

Full Screen Selecting Full Screen enters the full-screen mode, and returns to the previous screen mode by pressing the Esc key on the keyboard or selecting Full

Screen Close (x) from the popup menu displayed by clicking the right mouse button.

Frame Layout

Figure 3-39 Frame Layout

Layout Load Select the desired frame layout and click Load to apply the selected frame layout to RASplus.

54

Configuration

Figure 3-40 Layout Load

• Default Layout: Displays the panels that are used most frequently in the Watch and Search screen modes.

• Admin Layout: Displays only the panels that are used most frequently in the

Admin screen mode.

• Full Layout: Displays all the panels.

• Hide Layout: Hides all panels and displays only the screen.

• User Defined Layout: Displays the user-defined layout.

Layout Setup The user can configure the frame layout by displaying panels on the screen where they are most convenient. Set up the user-defined frame layout.

Figure 3-41 Layout Setup

• Always Load Layout at RASplus Startup: Select whether or not the selected frame layout loads automatically when RASplus starts.

• Save: Enter a layout name and click Save to save the current frame layout as a new user-defined layout.

• Rename: Select the layout from the Layout List and click Rename. Then change the layout name.

• Delete: Select the layout to delete from the Layout List and click Delete.


11/09

55

Configuration

Note Up to 10 user-defined layouts can be saved.

Help Menu

Displays RASplus version information.

Toolbar

The Toolbar allows convenient access to desired functions.

Figure 3-42 RASplus Toolbars

The controls on the toolbar perform functions as described below:

Figure 3-43 RASplus Controls Toolbar

Disconnect

RASplus Setup

Load Setup file

Save Setup file

Batch Job Setup

Log

Figure 3-44 Screen Layout Toolbar

Save Favorite Sites

Auto Sequence

Save

Print

Panic Recording

Play

56

Configuration

Select the desired screen layout using the layout toolbar. When changing the screen layout, the selected camera on the current screen will be located in the first cell of the new layout. When in one of the multi-view formats, click or to move to the previous or next page.

Figure 3-45 Frame Layout Toolbar

Click (Layout Load) to apply the selected frame layout to RASplus, and click

(Layout Setup) to set up the user-defined frame layout.


11/09

57

Configuration

58

Operation

4

Operation

Live Monitoring

RASplus provides remote monitoring functions for viewing video images in real time from either a single site or multiple sites. In addition, when events are detected at a remote site while in the live monitoring mode, RASplus displays the event information on the Watch Event View panel. In order to perform live monitoring, the display option must be set to Watch Screen or Watch and Search Screen during System setup.


To connect a remote site on the Watch screen, select the site or camera you want to connect to in the Remote Site, Favorite Sites, or Map panel and then drag and drop it in the desired position on the screen. The icon displays on each Watch screen.

Disconnecting from a Remote Site

To disconnect the current connection, select in the Remote Sites, Favorite Sites, or Map panel the site or camera you want to disconnect, then click (the disconnect button) on the toolbar, or select Disconnect from the System drop-down menu.

Note Some DVR models will only transmit images to the RASplus system while recording video.


11/09

59

Operation

Note When selecting the display option of Watch and Search Screen during System setup, the remote site can also be set to connect using the right or left mouse buttons (this is user-defined and must be set during System setup). Select Watch Screen to connect to the selected site on the Watch screen when the following text menu screen appears.

Figure 4-1 Watch Search Screen Selection

Screen Layout and Frame Layout

Figure 4-2 Screen Layout Toolbar

RASplus provides multiple screen layout options. The formats available are single-screen, quad, 1+7, 3x3, 4x4, 5x5, 1+32, 6x6, 7x7, 8x8 and full-screen. When in one of the multi-view formats, clicking or will move to the previous or next page.

To view a specific image in the single-screen mode, move the cursor to that image and double-click the left mouse button. To return to the previous screen mode from the single-screen mode, double-click the left mouse button in the monitoring window.

Clicking (Layout Load) will apply the selected frame layout to RASplus, and clicking

(Layout Setup) allows you to set up the user-defined frame layout.

Audio Communication

RASplus supports audio communication between the RASplus system and a remote site that is equipped with two-way audio. If you want to enable communication with a remote site that supports two-way audio, then select any camera from the remote site on the screen and click the right mouse button.

Note The icon displays on each camera screen when audio communication is available between the RASplus system and the remote site.

Select Enable Audio from the menu to display the following audio control panel.

60

Operation

Figure 4-3 Audio Communication Menu

To send audio to the selected remote site, click and speak into the microphone.

To monitor live audio from the selected remote site through the attached speaker, click

.

Click both and for two-way communication.

Click to disable audio communication.

Selecting an Audio Channel

Only DVRs that support remote two-way audio allow you to select an audio channel to monitor from the RASplus system.

Click to display the Select Audio Channel dialog box.

Figure 4-4 Select Audio Channel Dialog Box

Select an audio channel to monitor, then click OK.

Note To verify if two-way audio is supported, check the user guide for your DVR.

Sequence Monitoring

Click on the toolbar to sequentially connect to the registered sites. This allows for connection to more than one remote site and for the display of images from selected cameras.

Click during sequence monitoring to release sequence monitoring and to maintain the current connection.


11/09

61

Operation

For sequence monitoring to function, the sequence sites should be registered during

System setup. See

Sequence Monitoring on page 61

for details on configuring the sequence site.

Note While in the sequence monitoring mode, you cannot manually connect to sites by dragging and dropping with the mouse.

Color Control

Adjust the brightness, contrast, saturation and hue of live video for each camera by clicking the corresponding buttons on the Color Control panel. Clicking cancels the image processing operation and reloads the original image. Only the administrator can adjust the image through RASplus.

Note It is important that cameras are properly adjusted. These adjustments cannot make up for improperly adjusted cameras when the images are recorded.

Note Not all DVRs support color control through RASplus. Refer to the user manual for your DVR.

Figure 4-5 Color Controls

PTZ Control

Select a PTZ camera at the remote site, and control pan, tilt and zoom operations. Only the administrator can control a PTZ dome through RASplus. The icon will display on each camera screen on which a PTZ can be controlled remotely.

62

Operation

Figure 4-6 PTZ Controls

Note Advanced menu control features are enabled when a camera that is connected to the DVR supports PTZ features such as

Speed, Auto Pan, Tour, etc, and the DVR supports remote PTZ control. Depending on the specifications of the PTZ camera, some features of the Advanced menu might not be active.

Note PTZ control using the mouse is supported. Click the left mouse button on the image drag the mouse to move that image in the direction you want. Roll the mouse wheel to zoom in or out.

Note Not all DVRs support the PTZ control through RASplus. Refer to the user manual for your DVR.

Alarm Out Control

Control alarm out devices on the remote DVRs by clicking the ON or OFF buttons. Only the administrator can control an alarm out through RASplus.

Figure 4-7 Alarm Out Controls


11/09

63

Operation

Note Not all DVRs support the Alarm Out control through RASplus.

Refer to the user manual for your DVR.

Playback and Search

RASplus allows you to play back and search recorded images on remote DVRs. It also provides additional functions including zoom, various image enhancements, image saving and printing. To use remote playback and search functions, the display option must be set to Search Screen or Watch and Search Screen during System setup.

To connect to a remote site on the Search screen, select the site or camera you want to connect to in the Remote Site or Favorite Sites panel and then drag and drop it in the desired position on the screen. The icon will be displayed on each Search screen.

The remote site connection on the Search screen will automatically be disconnected if there is no activity for a specified time. Click on the toolbar or select Disconnect from the System drop-down menu to disconnect the current connection manually.

Note Connecting to a Favorite site will be available if the Search

Screen display option was set up to connect to selected Favorite sites. Refer to

Favorite Sites Panel on page 26 for more details on

Favorite Site setup.

Note When selecting the display option of Watch and Search Screen during System setup, the remote site can be also be set to connect using the right or left mouse buttons (this is user-defined and must be set during System setup). Select

Search Screen to connect to the selected site on the Search screen when the following text menu screen appears.

Figure 4-8 Watch Search Screen Selection

It is possible to display cameras in both the Watch Screen mode (live view) and Search

Screen mode at the same time. For example, you can connect to a remote DVR site with nine cameras. Drag and drop the site into the first frame on the viewing screen and

64

Operation select Watch Screen. Live video will display in the first nine frames on the screen. Then, drag and drop the site into the 10th frame on the viewing screen and select Search

Screen. You will be able to view any video recorded on the remote DVR in frames 10 through 18.

Search View Panel

Figure 4-9 Search View Panel

The Search View panel consists of playback and search controls, a time-lapse search table, and an event search table. The playback buttons on the Search View panel perform the following functions:

Fast Backward Play

Stop

Play

Fast Forward Play

Go to the First Image

Go to the Previous Image

Go to the Next Image

Go to the Last Image

Note The speed of fast forward depends on network bandwidth and the number of images per second recorded.

You can control the playback speed of images that are currently being played back by using the control slider.

You can control the fast forward or fast backward playback speed of images that are currently being played back fast forward or fast backward by using the

control slider.

You can enlarge a specific part of the image up to five times using the control slider.


11/09

65

Operation

The user can electronically pan and tilt within the enlarged image by dragging the image using the mouse. Click the left mouse button on the enlarged image and drag to move its position. Click the button to cancel the enlargement and reset the image.

You can change the brightness of the current image using the control slider. Click the button to cancel the brightness changes and reset the image.

Note Zoom in/out and brightness control work only while the image is paused.

Search Mode

RASplus supports two search modes: time-lapse and event. The time-lapse search mode searches for recorded data by time and date and then plays back images found within the time parameters. The event search mode searches for event log entries using specific conditions and plays back the images associated with those event entries.

These two modes have different panel configurations and search methods.

Note You cannot use both search modes at the same time.

Time-Lapse Search

1.

Click on the Search View panel to enter the time-lapse search mode.

Figure 4-10 Time-Lapse Search Screen

Note The timetable of the time-lapse search panel will differ depending on the model of the remote DVR that is connected to

RASplus.

66

Operation

2.

Selecting a date from the calendar initiates the time-lapse search. This also enables dates with available recorded images.

When first entering the time-lapse search, the latest date with recorded images will be selected (highlighted) in the calendar.

3.

Click from the selected date will be displayed on the timetable.

The recorded data for all cameras is displayed by time in one-hour segments and bar-shaped segments indicate that there is recorded data during that time.

4.

Select a specific hour by clicking the mouse on the desired hour segment. Video images will be played back starting with the first image captured within the one-hour segment. A yellow-highlighted segment indicates the selected time that will be played back.

Choosing a Segment

If the remote DVR’s time and date have been reset to a time that is earlier than some recorded video, then it is possible for the DVR to have more than one video segment in the same time range.

Click (the Segment button) and select the video segment you want to search. The active segment is highlighted with pink, and the inactive segment is highlighted with gray on the timetable.

Figure 4-11 Selecting a Video Segment

The recorded data for each camera channel is displayed by time in one-minute segments and a red vertical line indicates the selected time that will be played back.

The color of the bar indicates different types of recording:

• Yellow = Pre-Event

• Purple = Event

• Red = Panic

• Blue = Time-Lapse

If the DVR has more than one video segment in the same time range, each segment will be separated by a yellow vertical line.


11/09

Note The timetable of the time-lapse search panel will be different depending on the model of the remote DVR that is connected through RASplus.

67

Operation

To view an image at a specific time, click , the Go To button and set up the date and time to search.

Event Search

1.

Click on the Search View panel to enter the event search mode.

Figure 4-12 Event Search Panel

2.

Click .

3.

Set up the search condition in the Event Search dialog box ( Figure 4-13

).

Figure 4-13 Event Search Dialog Box

Figure 4-14 Event Search Text-In Dialog Box

68

Operation

Note The Event Search dialog box will differ depending on the specifications of the remote DVR.

Note The Text-In (Event Search - Text-In tab) search might not be supported, depending on the specifications and version of the remote DVR.

4.

Set up the search criteria for the event search in the Event Search dialog box, and click Find.

Note When First is selected for the search starting time, the search will be from the first recorded data. When Last is selected for the search ending time, the search will be to the last recorded data.

5.

The results will be displayed in the event list. A total of 100 results can be displayed at a time.

6.

Click

7.

Select an event in the list to play back the recorded data associated with that event. The images may be played back using the playback buttons.

Text-In Event Search

Event Search offers the capability of searching for video associated with text.

Note If it is desired to view the video with text overlay, ensure that

Overlay Text-In Data is enabled when setting up RASplus

(System menu

➤

Setup

➤

System 1

➤

OSD Setup

➤

Overlay Text-In Data).

1.

Enter video search criteria based on text strings in the Event Search Text-In dialog box (

Figure 4-15

).


11/09

69

Operation

Figure 4-15 Text-In Event Search Dialog Box

2.

Select the target cameras to search for text-in data.

3.

If needed, enable or disable the Case Sensitive check box. When enabled, the

DVR distinguishes between upper and lower case letters.

4.

Enter the text string you are searching in the Name field.

5.

Select a comparison operator from the Comp drop-down list that is used to compare the Name and Value fields.

6.

Enter in the Value field the comparison value of the text entered in the Name field.

Note The Column and Line fields can be used for more specific searches of text-in data. Column (0–80) is used to identify a desired number location within multiple columns of numbers.

Line (0–5) is used to search for desired data in a line below the text string that is entered into the Name field. When Line = 0, the search criteria will be based on the numerical value found in the same line that the text string content is found.

7.

Designate the location of the comparison value in the Column and Line fields.

8.

After you set your desired search conditions, click Find to display the search results.

Additional Functions

Searching Data Source

Click on the Search View panel to set up the data source to be searched.

70

Operation

Figure 4-16 Search Data Source Screen

Search on Local Searches the recorded data on the primary storage installed in the

DVR.

Search on Archive Searches the archived data on the backup storage installed in the

DVR.

Search on Other Searches recorded or archived data on storage used for another

DVR then installed in the selected remote DVR.

Note The Search on Other option might not be supported, depending on the specifications and version of the remote DVR.

Screen Layout and Frame Layout

Figure 4-17 Screen Format Toolbar

RASplus provides multiple screen layouts for playback. The available layouts are single-screen, quad, 1+7, 3x3, 4x4, 5x5, 1+32, 6x6, 7x7, 8x8, and full-screen. When in one of the multi-view formats, clicking or will move to the previous or next page.

To view a specific image in the single-screen mode, move the cursor to that image and double-click the left mouse button. To return to the previous screen mode from the single-screen mode, double-click the left mouse button in the playback window.

Clicking (Layout Load) will apply the selected frame layout to RASplus, and clicking

(Layout Setup) allows you to set up the user-defined frame layout.

Image Processing

Figure 4-18 Image Processing Panel


11/09

71

Operation

The Image Processing panel allows enhancing played back images using processing controls.

Blurs the image

Sharpens the image

Equalizes the image

Reduces the alias effect that occurs when using the zoom feature.

Reloads the original image

Playing Recorded Audio

RASplus will play audio when it is in the single-screen layout while playing back recorded video that has recorded audio.

Turning Audio Playback On and Off

Click the right mouse button on the screen. A menu displays. Select Enable Audio from that menu to turn audio playback On and Off.

Note Audio might be interrupted during playback because of network conditions and your PC’s performance.

Note Playing recorded audio may not be supported, depending on the specifications of the remote DVR.

Save

Click on the Search View panel to save recorded video.

Figure 4-19 Save Type Screen

72

Save as Self-Player… Saves any video clip of recorded data as an executable file.

1.

Set up the save parameters in the following dialog box.

Operation

2.

Click Start, and select Save in.

3.

Enter a file name and then select Save as type (.exe) for the video you are saving.

4.

Click Save.

Figure 4-20 Save As Self-Player

Note When more than one video segment exists in the same time range due to time overlap, a segment selection dialog box appears, prompting you to select the video segment you want to save from the segment list. Refer to the user manual that came with the remote DVR for details on time overlap.

Note When the data file reaches 2 GB, you are prompted to continue saving by creating multiple files in 2 GB units. If you do not want to be asked, select Don’t ask about file limit.

Note The Save As Self-Player dialog box differs, depending on the specifications of the remote DVR.

Save As Video… Saves any video clip of recorded data in an AVI (Audio Video

Interleaved) file format.

1.

Click Save As Video. The Save As Video screen appears.


11/09

73

Operation

Figure 4-21 Save As Video Screen

74

2.

Set up the save parameters in the Save As Video screen.

3.

Click Start and then set the file name.

4.

Click Save to start saving video.

Note Select Include Audio Data to include audio when saving video with recorded audio. This option is not available when more than one camera is selected.

Note When the data file reaches 2GB, saving stops. Select Limit File

Size and adjust the maximum file size to stop saving when the data file reaches the maximum file size setting. Select Save Split

File to save video by creating multiple files in 2GB units or in the

Max File Size units.

Note Select View Proceeding Frames to display a popup screen showing the video currently being saved.

Operation

Additional Functions

Save

Click on the toolbar to save the current image as a bitmap or JPEG file. If you place a checkmark in the box beside Include Image Info, then the text information about the site will be included when the image is saved.

Print

Click on the toolbar to print the image currently displayed on the screen on a printer connected to your computer. By placing a checkmark in the box beside Include Image

Info, text information about the site will be included when printing the image.

Screen Menu

Select a camera on the Watch or Screen screens and then click the right mouse button to display the popup menu.

Figure 4-22 Camera Popup Menu


11/09

75

Operation

Option

Table 4-1

Change Camera

Title

Enable Audio

Aspect Ratio

Camera Popup Menu Options

Function

Changes the camera name that displays on the screen. If you leave the Camera Title blank, then the camera name remote setup appears. Changing the camera title does not affect the camera name that was set up on the remote site.

Enables audio communication with the remote site on the

Watch screen (Two-way audio equipped remote sites only). Plays audio while playing back, on the Search

screen, recorded video that has recorded audio. See Live

Monitoring on page 59

and Playback and Search on page

64

for more information.

Changes the image aspect ratio that is displayed on each camera screen.

Fit to Screen Displays the images by fitting them to the screen size.

Original Ratio Displays the images by fitting them within the screen size while maintaining their original ratio.

Set Record Camera

Half Size (x0.5) to Quadruple Size (x4) Select the desired image size. Options are enabled when the selected camera screen can displays images in that size.

Sets the selected camera channel to be recorded during panic recording. See

System Menu on page 35

for information on configuring camera channels for panic recording.

Deinterlacing Enhances image display quality of interlaced video on the screen by eliminating horizontal scan lines or noise in areas with motion.

Anti-Aliasing Screen Enhances image display quality for all cameras on the screen by eliminating stair-stepping (aliasing) effects in the enlarged image.

Disconnect Camera Disconnects a camera on the screen.

Note With some computers, the image drawing speed might decrease while using a deinterlace filter, depending on the type of deinterlace filter.

76

Operation

Note With some computers, the image drawing speed might decrease when the Anti-Aliasing Screen option is selected.

Panic Recording

Clicking on the toolbar starts panic recording of cameras currently displayed on the

Watch screen. Clicking the button again stops panic recording. Up to 16 channels can be recorded at a time, and you can select which cameras are to be recorded during the

System setup. Clicking on the toolbar initiates the Record Player program and plays video saved in the recording folder designated during the System setup. The Record

Player GUI and its controls are almost identical to the Clip Player. Refer to

Appendix A,

Video Clips Review for more details.

If you want to play back video saved in another recording folder, run the Record Player program first. Move to the Start menu in Windows. Then, select Record Player from the

RASplus options and select the recording folder path you want.

Recorded video can be saved in a bitmap or as an executable file using the save function of the Record Player.

Note Panic recording will be available only if you select the Use

Recording check box in the recording options during the

System setup.

Note The date and time displayed on the Record Player indicates when the recording was made on RASplus.

Note The icon will display on each screen when panic recording starts.


11/09

77

Operation

Note Audio recording is not supported.

Status View

RASplus provides a display of event, alarm out, system check and recording status information from the connected remote site in real-time. To connect the remote site, select the site or camera you want to connect to from the Remote Site or Emergency

Event View panel and then drag and drop it in the Status View panel. Or, you can select

Connect Status from the popup menu displayed by clicking the right mouse button after selecting the site from the Remote Site list.

Figure 4-23 Status View Panel

78

Operation

Function Buttons

Disconnect: Disconnects the current connection on the Status View panel.

Note If you want to connect to another site, disconnect from the currently connected system on the Status View panel first by clicking .

Remote Setup: Allows changing the setup of the remote DVR connected to the

Status View panel.

Note Refer to the manual for each applicable remote DVR for more details on system setup.

Remote System Log: Displays the system log information of the remote DVR connected to the Status View panel.

Remote Event Log: Displays the event log information of the remote DVR connected to the Status View panel.

Note See

Remote Menu , page 50

, for more details on the Remote

System Log and Remote Event Log.

Note When the remote site is not connected to the Status View panel,

Remote Setup, Remote System Log and Remote Event Log menus can be accessed by clicking the right mouse button after selecting the remote site on the Remote Sites panel.

Remote Panic Control: Controls panic recording of the remote DVR that is connected in the status view panel. (Panic Recording On) indicates that the remote DVR is not in the panic recording mode and that you can start panic recording by clicking the button. (Panic Recording Off) indicates that the remote DVR is in the panic recording mode and that you can stop recording by clicking the button.


11/09

79

Operation

Note Remote Panic Control might not be supported, depending on the specifications and version of the remote DVR.

Status Display Window

The Status Display Window displays the event, alarm out, system check and recording status information of the remote system connected to the Status View panel in real-time.

Note Status Display might not be supported, depending on the specifications of the remote DVR.

• Event: Displays events detected by the internal motion detector or by an external sensor. The status display of event detection will continue during the preset dwell time of the event-driven recording.

• Event Detection (Motion Detection, Sensor)

• No Event Detection

• Event Off

• Alarm Out: Displays status of the alarm-out signals.

• Alarm Out

• No Alarm Out

• Alarm Out Off

• System Check: Displays the function status of the camera, alarm, and recording.

• Normal (Camera, Alarm, Recording)

• Irregular

• System Check Off

• Record From/To: Displays the record period.

• Status: Displays the recording, playback, archiving, clip-copy status.

• On

• Off

(Recording, Playback, Archive, Clip-Copy)

• Version: Displays the system version information.

80

Video Clips Review

A

Video Clips Review

You do not need to install any special software on your personal computer to review video saved as Self-Player files. The file contains a built-in Player program.

Double-clicking the target file starts the Player program.

Note The Player GUI will differ depending on the model of the remote

DVR that is connected to RASplus when reviewing the video saved as a Self-Player file.

MiniBank Player

Note Honeywell suggests that the computer used for the MiniBank

Player program has at least an 800MHz Pentium III. If your CPU is slower than this, video clips recorded at maximum speed with very high image quality will be played back slowly.


11/09

81

Video Clips Review

Figure A-1 MiniBank Self Player User Interface

82

The Monitoring Screen displays the backed up images. Click the right mouse button on the image while holding the Shift key to switch the screen size. Click and hold the left mouse button and drag the image to move its position.

Click Quit to exit the Player program.

Click Save to save the current image in a bitmap file format on the local hard disk drive or floppy disk.

Click Print to print the current image on the printer connected to your computer.

The Backup File Information window displays information regarding the backup file.

Location displays the site description of the DVR where the backup was made. Record displays the time span of the video backup file. Encryption displays whether the backup file has been tampered with. Normal means the file has not been tampered with, Wrong means the system has detected tampering, and no mark means the user cancelled the encryption check.

The Current Image Information window displays information about the current image.

Camera Title displays the camera name of the current image, and Time displays the date and time the image was recorded.

The Image Search Slide Bar displays the current playback position. The user can move to another image by clicking and dragging the slide bar.

Video Clips Review

The Playback Function Buttons include fast backward, backward, play, pause, fast forward, go to the first image, go to the previous image, go to the next image, and go to the last image buttons.

The Brightness Control Slide Bar adjusts the brightness of the backup images by clicking and dragging the slide bar. Minute brightness change can be made using and located at each end of the bar.

The Brightness Revert Button reloads to the original image.

Click the Zoom Out / In buttons to zoom in or out of the current image. Scrolling the mouse wheel up or down on the image also zooms in or out.

Clicking the OSD (On-Screen Display) button switches the OSD option. The OSD information includes camera location and date/time.

Clicking Mute mutes the recorded audio.

Double-clicking the logo at the top left corner while holding the Shift key switches video formats when you are experiencing improper image display.

Clip Player

Note It is suggested that the computer used for the Clip Player program has at least an 800MHz Pentium III. If your CPU is slower than this, video clips recorded at maximum speed with very high image quality will be played back slowly. Also, DirectX

9.0 or higher is required to install, and a VGA card with 16 MB or higher video RAM is recommended for proper operation.

Note You will be asked to enter the password to initiate the Clip Player program if you select the Save Password option when saving recorded video.


11/09

83

Video Clips Review

Figure A-2 Clip Player User Interface

84

The Clip Player screen displays the clip images.

Note Proper image display depends on the PC display settings. If you are experiencing display problems, click the right mouse button on the background screen and select Properties > Settings then set the Color quality to 32 bit. Then select Advanced >

Troubleshoot, and set the Hardware Acceleration to Full.

If the display problem continues, make sure that DirectX version

9.0 or higher has been installed. To check the version of DirectX, click Start > RUN and type dxdiag. Hit the Enter key to display the DirectX Diagnostic Tool dialog box. Move to the

Display tab and make sure DirectDraw Acceleration is set to

Enabled. Test DirectDraw by selecting the DirectDraw Test button.

Please check the driver version of the video card and update it to the latest available version. If you still have display problems after changing all display settings described above, try replacing the video card. Video cards with an ATI chipset are recommended.

Video Clips Review

Click to exit the Player program.

Click to go to the beginning of the video clip.

Click to play the video clip in fast reverse.

Click to go back one frame of the video clip.

Click to play the video clip.

Click to go forward one frame of the video clip.

Click to play the video clip in fast forward.

Click to go to the end of the video clip.

Click to show the previous camera group if there is recorded video in the previous camera group in the current screen mode.

Click to cycle through the screen layouts. It cycles through 2x2, 1+7, 3x3 and 4x4.

Click to show the next camera group if there is recorded video in the next camera group in the current screen mode.

Click to set up the Clip Player properties. The Clip Player menu opens.

Figure A-3 Clip Player Menu

Table A-1

Option

Print

Frame Info

Image Processing

Clip Player Menu Functions

Function

Prints the current image.

Displays the Channel, Title, Time, Type, Size, and

Resolution information about the image.

Controls brightness, blur, and sharpness of playback images. (Single-screen layout and Pause Mode only)


11/09

85

Video Clips Review

Table A-1 Clip Player Menu Functions

Option

Play Speed Control Changes the playback speed (Play) or fast forward/backward speed (FF/RW).

Drawing Mode

Function

Selects the draw mode level. If you are not sure about the best draw mode level for your system, try each level until the image displays properly.

Screen Size

Aspect Ratio

OSD Setup...

Enable Audio

Changes the ClipPlayer screen size.

Changes the image aspect ratio displayed on each camera.

Selects options to display on the screen.

Anti-Aliasing

Screen

Show Text-In

Plays audio while playing back recorded video that has recorded audio. (Single-Screen Layout Only)

Enhances image display quality on the screen by smoothing the stair-stepping (aliasing) effects in the enlarged image. If the video plays slow because of the slow speed of your CPU, then release the Anti-Aliasing

Screen option to possibly improve playback speed.

Displays video with text-in data if the video was recorded with text-in data. (Single-Screen Layout only)

Click to save clip images. The ClipPlayer menu opens.

Figure A-4 Save Clip Images Menu

Table 4-5 Save Clip Images Options

Option

Save as Image

Save as Image (Actual Size)

Function

Save the current image as a bitmap or JPEG file.

Save the current video frame as a bitmap or

JPEG file in its actual size. (Single-screen layout only)

86

Video Clips Review

Option

Table 4-5

Save as Clip-Copy

Save as Video

Clip-Copy Log

Save Clip Images Options

Function

Save video for the desired time range as an executable file.

Save video for the desired time range as an AVI file.

Save the clip-copy log information as a text file.

The user information about Save As Clip-Copy will be logged as "Internal-Copy".

Click to enlarge the image or display the image in its actual size (Single-screen layout only). You can move the enlarged image by clicking the left mouse button and dragging.

Click to display the image full screen.

Encryption icons display in the bottom-right corner. displays when the clip file has not been tampered with, and displays and playback stops when the system has detected tampering.

Note If the VGA card or monitor does not support 800x600 video resolution, Full Screen might not display properly. If this happens, press the ESC key on your keyboard to return to the normal screen mode.

Click the slider bar and move it left or right to move through the video clip.

Placing the mouse cursor on an image and clicking it will cause that image to display full frame.

Note Some options might not be available, depending on the specifications and version of the remote DVR.


11/09

87

Video Clips Review

88

DVR Name Service (DVRNS)

B

DVR Name Service (DVRNS)

Using Static IP addresses in LAN/WAN networks requires high management overhead and increases the cost burden to users. Therefore, it has become essential for DVRs to support Dynamic IP addresses in ADSL/VDSL networks using DHCP (Dynamic Host

Configuration Protocol). This reduces cost burdens and increases cost-effectiveness for system users. Use the following steps to set up a system using DVRNS.

System Configuration

Figure B-1 DVRNS Server System Configuration

STEP 4

DVR

RASplus

STEP 1

STEP 3

STEP 2

DVRNS Server


11/09

89

DVR Name Service (DVRNS)

STEP 1

(DVR > DVRNS Server)

Register the unit name and IP address of the DVR during the DVRNS setup on the

Remote DVR. This unit name and IP address will be registered on the DVRNS server directly.

Note Refer to the DVR and DVRNS Server guides for detailed information on the DVRNS and DVRNS Server setup.The DVRNS server software and user guide are on the RASplus CD.

STEP 2

STEP 3

STEP 4

(RASplus > DVRNS Server)

Request the IP address of the remote DVR using the registered unit name of the DVR you want to connect to.

(DVRNS Server > RASplus)

The DVRNS server notifies the RASplus of the requested IP address.

(RASplus > DVR)

Connect to the target DVR using the IP address returned from the DVRNS server.

Note You should follow steps 2 to 4 whenever connecting to the remote site because the DVR name and IP address might change at any time.

90

Map Editor

C

Map Editor

The Map Editor program allows you to create 3-D maps of remote sites. With the drag-and-drop and link function, you can create and edit the map easily and efficiently.

Run the program by selecting Map Editor from the RASplus options under the Start menu in Windows.

Figure C-1 Map Editor


11/09

91

Map Editor

Background Image Setting

1.

Prepare the image in a bitmap or JPEG file format.

2.

Click map.

3.

Go to the Property [Canvas] tab and set the background image information.

Figure C-2 Property [Canvas] Tab

• Name: Enter a name of the background image.

• Horizontal/Vertical: Adjust the background image size by clicking each field and changing the numbers.

• Position: Adjust the position of the background image on the screen. Select

Auto Fit to fit the map screen size to the background image.

Option Menu

Click the Option menu to set up the remote site information, the device status display, and the remote site name to display.

Figure C-3 Option Menu

Site Information Setting Select the Site Information Setting… in the Option menu to set the information about the remote site connections, and the following Site

Information setup window appears.

Figure C-4 Site Information Window

92

1.

Click Add.

Figure C-4

appears.

Map Editor

Figure C-5 Site Item Window

2.

In the Remote Site Setup area, enter the site name and IP address of the DVR connected to the devices you want to include on the map.

3.

Click Port… and enter the network IP port number (8000 to 12000) that matches the value set during the LAN setup of the DVR.

4.

Check the box beside Use DVRNS (DVR Name Service) if you want to use the

DVR name service.

Note If you use DVR Name Service, you can enter the name registered on the DVRNS server instead of the IP address of the DVR, and you do not need to enter the network IP port number.

5.

Under Login Setup, enter the user ID and password for the DVR associated with devices.

6.

Under DVRNS Server, enter the IP address and port number (10000 to 12000) of the DVRNS server, which matches the values set during the DVRNS setup on the

DVR.

7.

Clicking OK saves the setting.

Popup Dwell Time Select Popup Dwell Time... in the Option menu to set the duration

that the Map popup screen displays when events are detected. Figure C-6 appears.

Figure C-6 Popup Dwell Time Dialog Box

Check the box beside Use Timeout and adjust the time out dwell time from 1 second to 5 minutes. Select Display Remaining Time to display the remaining time out dwell time on the Map popup screen.


11/09

93

Map Editor

Note Popup Dwell Time will be applied to all maps displayed on the map panel.

Status Color Setting Select Status Color Setting… in the Option menu and

Figure C-7 appears. You can set the device to display a unique color reflecting its status

on the Map panel.

Figure C-7 Status Color Window

94

Check the box beside Color Use and select each status box to use. Click each selected status box and select the desired color. Click OK.

Unplugged: Either connection to the remote site has failed, or the Device

No. for the device is not supported by the site.

Event off:

Irregular:

Video Loss:

Motion:

Alarm In:

Alarm Out:

Event detection is not set up.

The device is not working properly.

Video loss is detected.

Motion is detected.

Alarm in is detected.

Alarm out is detected.

Note Devices are displayed as Irregular based on the system check settings and as Video Loss, Motion, Alarm In, and Alarm

Out based on the event detection settings on the remote DVR.

Note The device displays mixed colors when detecting more than two statuses at the same time.

Map Editor

Name Table Select Name Table… in the Option menu to display the name instead of

the IP address of the DVR on the Map panel. Figure C-8 appears.

Figure C-8 Name Table Window

Click the Display Name field of each IP address and enter the name of the DVR to display on the popup screen.

Device Setting

1.

Selecting , , or on the toolbar displays the Camera, AlarmOut and

AlarmIn tabs under the Image Bar.

2.

Select the icons, and drag and drop them at the desired locations on the background image.

3.

Go to the Property [Camera/AlarmOut/AlarmIn] tab and set the device information.

Figure C-9 Property [Camera/AlarmOut/AlarmIn] Tab

Property

General

Name

Description

Table C-1 Property Tab Device Information

Description

Enter a device name.

Enter a description of the device.


11/09

95

Map Editor


Property

Site Information

Image

Ratio

Description

Select a proper site for the device in the list, and the Equipment fields (User, Password, IP Address and Port) are filled automatically with the information set in Site Information Setting....

Select an image of a device.

Adjust the size of the device image.

X Coordinates / Y

Coordinates

Horizontal / Vertical Adjust the size of the device image by clicking each field and changing the numbers.

Popup Camera

Adjust the position of the device image by clicking each field and changing the numbers.

If the selected device is an alarm-in device, you can associate a camera with the sensor by entering the camera name. The camera name you enter should be the same as the camera name entered under the Property [Camera] tab. The Map panel pops up another screen and displays images of the camera associated with the sensor on the popup screen when an alarm-in event occurs.

Equipment

IP Address / User /

Password / Port

Device No.

Each field is filled in automatically with the information (user ID, password, and port number) set in Site Information Setting..., or you can enter it manually.

Set the device number (1 ~ 32) for each device. If the selected device is a camera, Device No. changes to Camera No.

DVRNS Use Select Yes to use DVR Name Service, and the DVRNS field appears.

Enter the IP address (or domain name) and the port number of the

DVRNS server, and the name of the DVR registered on the DVRNS server.

Note You should not select numbers that are not supported for devices on the remote DVR when selecting Device No.

Otherwise, the map cannot detect the device and it displays the device status as Unplugged. For example, the device number should be from 1 to 16 when the device is connected to a

16-channel DVR.

Note If you set the IP address and port number of the DVRNS server in

Site Information Setting…, the DVRNS fields are filled with the information automatically.

96

Map Editor

Note The DVRNS function is supported only with the devices associated with a DVR providing the DVRNS (DVR Name

Service) function.

4.

Go to the Event [Camera/AlarmOut/AlarmIn] tab and set the option for the devices.

Figure C-10 Event [Camera] Tab

• Event [Camera]: Selecting an event from a drop-down list and checking the

Watch View Popup box sets the Map panel to pop up another screen when an event occurs. Selecting Click from a drop-down list and checking the

Watch View Popup box pops up another screen by clicking the mouse button on the camera icon on the Map panel regardless of event detection.

Figure C-11 Event [AlarmOut] Tab

• Event [AlarmOut]: Checking the Switch on/off box controls the alarm-out remotely by clicking the alarm-out icon on the Map panel.

Figure C-12 Event [AlarmIn] Tab

• Event [AlarmIn]: Selecting Alarm-in Event from the drop-down list and checking the Watch View Popup box sets the Map panel to pop up another screen when an alarm-in event occurs. Selecting Click from a drop-down list and checking the Watch View Popup box pops up another screen by clicking the mouse button on the alarm-in icon on the Map panel regardless of event detection.

Note The popup camera should be associated with the alarm in

device to use the popup function. See Popup Camera

, Device

Setting on page 95 for the popup camera association.


11/09

97

Map Editor

Link Setting

1.

Click

2.

The Link Map box appears. Select the individual link boxes by using the

Ctrl key on the keyboard, and then adjust the size and position of the link box using a mouse, a keyboard or the icons shown below.

Interval adjustment: Equalizes the distance between three or more selected boxes.

Size adjustment: Equalizes the size of two or more selected boxes.

Clicking the arrow keys while holding the Shift key on the keyboard changes the size of the selected boxes.

Position adjustment: Arranges two or more selected boxes towards one direction or towards the center. Clicking the arrow keys while holding the

Ctrl key on a keyboard changes the position of selected boxes.

Cut, Copy, Paste: Cuts, copies or pastes the link box.

3.

Go to the Property [Link] tab and set the properties of the selected link box.

Figure C-13 Property [Link] Tab

98


Property

Name

Image

Description

Enter a name for the link box.

Double-click the field and select an image to insert in the link box.

Link Document

Ratio

Double-click the field and select a map to be linked with the link box.

Adjust the image size within the link box.

X Coordinates / Y

Coordinates

Adjust the position of the link box on the screen by clicking each field and changing the numbers.

Horizontal / Vertical Adjust the link box size by clicking each field and changing the numbers.

Text Show Select Yes to display the name of the link box on the selected image.

4.

Click

Map Editor

You can monitor the remote sites by using the map. See Map Panel on page 28

for more information.


11/09

99

Map Editor

100

Honeywell Security Group (Head Office)

2700 Blankenbaker Pkwy, Suite 150

Louisville, KY 40299, USA www.honeywellvideo.com

℡ +1.800.796.2288

Honeywell Security Group Europe/South Africa

Aston Fields Road, Whitehouse Ind Est

Runcorn, Cheshire, WA7 3DL, UK www.honeywell.com/security/uk

℡ +44.01928.754028

Honeywell Security Group Northern Europe

Ampèrestraat 41

1446 TR Purmerend, The Netherlands www.honeywell.com/security/nl

℡ +31.299.410.200

Honeywell Security Group Deutschland

Johannes-Mauthe-Straße 14

D-72458 Albstadt, Germany www.honeywell.com/security/de

℡ +49.74 31.8 01.0

Honeywell Security Group Caribbean/Latin America

9315 NW 112th Ave.

Miami, FL 33178, USA www.honeywellvideo.com

℡ +1.305.805.8188

Honeywell Security Group Pacific

Level 3, 2 Richardson Place

North Ryde, NSW 2113, Australia www.honeywellsecurity.com.au

℡ +61.2.9353.7000

Honeywell Security Group France

Immeuble Lavoisier

Parc de Haute Technologie

3-7 rue Georges Besse

92160 Antony, France www.honeywell.com/security/fr

℡ +33.(0).1.40.96.20.50

Honeywell Security Group Asia

35F Tower A, City Center, 100 Zun Yi Road

Shanghai 200051, China www.asia.security.honeywell.com

℡ +86 21.5257.4568

Honeywell Security Group Italia SpA

Via della Resistenza 53/59

20090 Buccinasco

Milan, Italy www.honeywell.com/security/it

℡ +39.02.4888.051

Honeywell Security Group Middle East/N. Africa

Post Office Box 18530

LOB Building 08, Office 199

Jebel Ali, Dubai, United Arab Emirates www.honeywell.com/security/me

℡ +971.04.881.5506

Honeywell Security Group España

Mijancas 1. 3a planta

P. Ind. Las Mercedes

28022 Madrid, Spain www.honeywell.com/security/es

℡ +34.902.667.800

www.honeywellvideo.com

+1.800.796.CCTV (North America only)

[email protected]

Document 800-05056 – Rev C – 11/09

© 2009 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.

However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.

No results