Avtex W152T User manual

TFT-LCD TV

W152D

USER MANUAL

READ CAREFULLY

BEFORE OPERATION

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

T h i s s y m b o l i n d i c a t e s d a n g e r o u s v o l t a g e inside the product that presents a risk of electric shock or personal injury.

TO PREVENT ELECTRICAL SHOCK.

DO NOT REMOVE THIS COVER. NO

USER- SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol indicates important instructions accompanying the product.

Please read this manual carefully before using this product.

Before connecting the AC power cord to the DC adapter outlet ,make sure the voltage designation of the LCD TV corresponds to the local electrical supply .

If you are unsure of your power supply , ask your local power company .

Never insert anything metallic into the cabinet openings of the liquid crystal display (LCD)TV/monitor;otherwise it may create the danger of electric shock.

To avoid electric shock, Never touch the inside of the LCD TV/monitor and adapter. Only a qualified technician should open the case of the LCD TV/ monitor/adapter.

Never use your LCD TV/monitor/adapter if the power cord has been damaged .

Do not allow anything to rest on the power cord, and keep the cord away from place where people can trip over it .

Be sure to hold the plug, not the cord, when disconnecting the adapter from an electric socket.

Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation.

To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the

LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

IMPORTANT SAFETY INSTRUCTIONS

Do not expose the LCD TV/monitor to extreme temperature conditions or to extreme humidity conditions.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel.

Locate your DC adapter near an easily accessible AC outlet.

If your LCD TV/monitor does not operate normally in particular, if there are

any unusual sounds or smells coming from it unplug it immediately and

contact an authorized dealer or service center.

High temperature can cause problems. Don`t use your LCD TV/monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the DC adapter when it is going to be left unused for an extended

period of time .

To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

If the LCD TV/monitor is broken, do not try to repair it yourself. Contact qualified service personnel.

Unplug your DC adapter from the AC outlet before any service.

Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shook, or other hazards.

Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LCD TV/monitor is in safe operating order.

The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

CONTENT

INSTALLATION

Normal installation

PANEL BUTTON FUNCTIONS

Front panel

Right panel

1

2

3

Left panel

Rear panel

EXTERNAL EQUIPMENT

Connecting figure

REMOTE CONTROLLER

Remote buttons

4

5 Battery installation

LET'S START

Change source operation

TV MENU SETUP

Picture

TV setting

Nicam/bilingual receiving

TELETEXT FUNCTION

Teletext display

Mix mode

Index

Display mode

8

9

11

14

Sound

System setting

15 Page selection

15 Lock

15

Zoom in teletext

16 Colorized buttons

AV, S-VIDEO , SCART AND YPbPr SETUP

Video setting menu 17

VGA SETUP

Picture

Monitor setting

18

20

Sound

Function

DVD OPERATION

Brief introduction

Function introduction

Compatible disc types

Playback

22 Comparison between DVD

and other discs

22

24

Features

25 Volume control

19

21

22

23

25

2

3

7

10

13

15

15

16

16

CONTENT

DVD OPERATION

VCD, SVCD menu playback

Memory

Select language/audio

Repeat playback of selected segment

Play from the desired position

MPEG4 and JPEG file playback

26 Direct play

27

Select track to play directly

by number button

28

Repeat playback

29 Fast playback

30 Zooming the displayed frame

34

DVD FUNCTION SETUP

General setup

Audio setup

Initial setup

35

35

36

Speaker setup

Video setup

CARD READER AND USB OPERATION

Usage of USB equipment

and 3-IN-1card reader 38

TIME SETTINGS

Time setting 40

DVB OPERATION

General setting

Auto search

Channel setting

TROUBLE SHOOTING

Display troubleshooting

DVD troubleshooting

SPECIFICATIONS

Specifications

DISPLAY MODE

Display mode

42 Adanced setting

44 Manual search

46 EPG

48

49

Sound and TV troubleshooting

50

51

35

36

43

45

47

48

27

28

29

30

31

INSTALLATION

NORMAL INSTALLATION

C

A

B

Ostium

Kickstand

M5 28

Screw 1pcs

Rear viewing of LCD TV

1, Hook the tache (labeled A)of the kickstand on to the slot (labeled C)

2, Tighten the screws ( M5 28) through the ostium (labeled B).

1

1

PANEL BUTTON FUNCTIONS

FRONT PANEL

HD3DSound

LEFT PANEL

Indicator(the indicator is red when in standby

mode, and green when in working normally)

IR sensor window

MENU(Enter or exit TV menu)

CHANNEL(Increase or decrease channel number)

VOLUME(Increase or decrease volume)

SOURCE(Select input source )

STANDBY(To switch in standby mode and power-on

mode. )

2

PANEL BUTTON FUNCTIONS

RIGHT PANEL

USB jack

MEDIA CARD socket

EJECT button

STOP button

PLAY/PAUSE button

HEADPHONE jack

REAR PANEL

9 r r b b

1 2 3 4 5 6

8

7

1 YPbPr or YCbCr input terminal

2 Composite video/audio and

S-VIDEO audio input

3

4

PC audio and YPbPr audio input

Coaxial digital audio output

5 S-VIDEO input

6 SCART connecting terminal

7

8 VGA input terminal

9 12V DC input terminal

3

EXTERNAL EQUIPMENT

CONNECTING DIAGRAM

L R

DVD or VCR player

Power amplifier (with coaxial digital audio in)

NOTE

You should insert all interconnecting cables BEFORE plugging in the power cord.

4

REMOTE CONTROLLER

19

REMOTE BUTTONS

REVEAL/EPG

Display the hidden teletext information

/ To display the program guide (valid in

DVB mode ) .

20 ZOOM/CYAN

To zoom in and zoom out to the picture, valid in DVD mode/CYAN button.

21

4

7

1 2

5

8

0

3

6

9

5

6

7

8

1

2

3

4

9

10

11

12

13

14

15

16

17

18

19

20

21

REPEAT/YELLOW

To repeat playback ,valid in DVD mode/YELLOW button.

1

2

3

4

5

EJECT

Disc in/out, valid in DVD mode.

[ ] button

Pause playing/steps playback in pause mode, valid while in DVD mode.

[ ] button

To fast-forwards DVD playback, valid in DVD mode.

[ ] button

To select the next chapter or track.

Number button

To select program number.

6 RETURN

To exchange channel between the previous program and the current program, valid in TV or DVB mode.

7 TIMER

To display the calendar and settings for timer of power on/off .

8

9

10

11

DVB MENU

To enter or return to the previous DVB menu and screen .

OK button

To confirm the selections.

Left/Right cursor(menu adjustment )

To move leftward/ rightward or adjust the selected item in the menu, or adjust sound volume, valid in DVD mode.

SETUP

TV or DVD function setup.

12

13

14

15

16

17

18

DISC MENU

To go to the menu of DVD menu, valid in DVD mode.

CHANNEL+/-

To increase or decrease program number valid in TV and DVB mode.

LANGUAGE

To switch the output language or channel, valid in DVD mode.

CARD/DISC

Switches between the card reader, DVD or

USB mode, valid while in DVD mode.

HOLD/TV/

To stop teletext on current page/Switch between

TV and radio modes, valid in DVB mode.

INDEX/PAGE+

To display main content page when playing the teletext /Change to the program in next page.

SUBPAGE/PAGE-

To display the subpage of the teletext/Change to the program in previous page.

5

REMOTE CONTROLLER

22

23

24

25

26

27

28

29

STANDBY

To switch between standby mode and power-on mode.

[ ] button

To fast backward playback, valid in DVD mode.

[ ] button

To select the previous chapter or track, valid in

DVD mode.

[ ] button

To stop playing, valid in DVD mode.

TWO-DIGIT NUMBER BUTTON

To switch between one or two-digit program number.

SOURCE

To select input source: TV, DVB, DVD,AV,

S-VIDEO,SCART, YP B P R and VGA.

UP/DOWN cursor

To select upward/downward in the menu or change the channel, valid in TV and DVB mode.

DISPLAY

To display source information.

30

31

32

33

34

35

36

37

MUTE

Sound mute switch.

Volume +/-

To increase or decrease sound volume.

FAVORITE/Q-PLAY

Display your favorite channel list, valid in DVB mode /Play DVD directly in DVD mode.

NICAM/CAP.

Switch in NICAM, A2 and mono channel(It is effective in TV signal input with NICAM or A2 function) / Capture the currently played image and set it as the power-on logo in DVD mode.

TEXT/TEXT

To enable or disable the function of teletext.

MIX/SUBT

To display TV and teletext in the same time/

Selects the subtitle language or switches to

JPEG display mode, valid in DVD and DVB mode.

CANCEL/AUDIO

To cancel teletext/ To change the audio language and sound track, valid in DVB mode .

SIZE/INFO

To magnify teletext page/ To display the information about channel and program, valid in DVD and DVB mode.

6

29

30

31

32

33

34

35

36

37

38

39

22

23

24

25

26

27

28

4

7

1

8

0

2

5

3

6

9

To play from a certain time point, valid in DVD mode/RED button.

39 A-B/GREEN

To segment repeat , valid in

DVD mode/Green button.

REMOTE CONTROLLER

BATTERY INSTALLATION

Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of

the battery to the -/+ marks inside the battery compartment, as follows:

BATTERY LIFE

Generally speaking, the battery may be used for one year, but the battery life is also

related to the usage times and remote controller operation.

If the remote controller is still invalid when very near to the remote sensor window, please replace the battery.

Please use SUM-4(AAA) battery.

NOTES

Never use rechargeable battery.

Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.

Pay attention not to fall or knock the remote controller, which will cause damage or

function failure to it.

Do not use new and old battery together.

When not using the remote controller for a long time, please take out battery to avoid liquid leakage. Before replacing new battery, please clean the electrolyte in the remote controller.

If electrolyte splashes into body, please clean it with water.

CAUTION

Please put battery in the place children cannot touch. If swallow by accident, please contact with the local doctor immediately.

7

LET'S START

After this unit is well fixed on the desk or on the wall, and the cords are well connected for input or output, what you should do next is:

First, connect the adapter to the LCD TV, then the unit will go into standby mode, and you can see the indicator goes into red.

Second, press [STANDBY] key on the left side of the LCD TV or [STANDBY] button on the remote control to make the unit switch into working mode, and you will see the indicator turn green. Now you can enjoy all exciting features of the whole new product.

STANDBY

STANDBY

INDICATOR

CHANGE SOURCE OPERATION

You can change input source by using Source Menu. Press [SOURCE] button or [SOURCE] key to show the menu as follows:

TV

DVB

DVD

AV

S-VIDEO

SCART

YPBPR

VGA

The current source item is highlighted. Through press [ ] button on the remote control or [ CH+/CH- ] key on the left side of LCD TV to select your desire, Press [ ] button,

[VOL+/VOL-] key or [OK] button to confirm your choice .

8

TV MENU SETUP

This product can store up to 100-channel programs (0 99). You can select your favorite channel through [CH+/-] or number buttons, and you can scan and store all of the channels through manual or automatic mode.

In TV mode, press [SETUP] button into the main menu and the main menu will show as follows:

Through pressing [ ] button on the remote control, you can select main menu sections(main menu sections consist of " PICTURE " , " SOUND " ,

" TV SETTING " , " SYSTEM SETTING ") . Press

[ ] or [OK] button to enter this menu section.

Press [ ] button on the remote control to select the item, and then press [ ] button to adjust parameter value. Press [SETUP] button to return to main menu sections.

PICTURE

BRIGHTNESS

CONTRAST

SATURATION

TINT

SELECT ENTER OK

USER

PICTURE

50

50

50

40

RETURN SETUP

PICTURE

Select " " and menu will show as follows:

Press [ ] button to select items and [ ] button to adjust.

PICTURE

BRIGHTNESS

CONTRAST

SATURATION

TINT

SELECT

USER

PICTURE

50

40

50

50

ADJUST RETURN

SETUP

Item

PICTURE

BRIGHTNESS

CONTRAST

SATURATION

TINT

Description

Can be change between : "USER ", "STANDARD ", " DYNAMIC " and "SOFT ".

To adjust brightness.

To adjust contrast.

To adjust color saturation.

To adjust picture tint, only valid in N 3.58/N 4.43/PAL60 and display mode with V-scanning frequency equal 59.94 (please refer to P52).

9

TV MENU SETUP

S O U N D

Press [ ] select " " and press [ ] or [OK] button to enter the following section:

SOUND

SOUND

BALANCE

BASS

TREBLE

BBE VIVA

USER

OFF

40

50

34

SELECT ENTER OK RETURN SETUP

Press [ ] button to select item and press [ ] button to adjust . The following is sound item description.

Item

SOUND

Description

NEWS , FILM "

BALANCE

BASS

To adjust balance of left and right channels.

To adjust bass.

TREBLE To adjust treble.

BBE VIVA To adjust BBE mode(with bass and treble invalid)

10

TV MENU SETUP

T V S E T T I N G press [ ] select " " item and press [ ] or [OK] button to enter the following section:

TV SETTING

CHANNEL

CHANNEL EDIT

FINE TUNE

MANUAL SEARCH

AUTO SEARCH

5

168.90MHZ

SELECT ENTER OK RETURN SETUP

Press [ ] button to select item and press [ ] button to adjust or activate.

Item

CHANNEL

Description

To change the channel number.

CHANNEL EDIT To enter a submenu to set channel skip and channel swap.

Please refer the next page.

FINE TUNE

To adjust the channel frequency accurately to make the sound and picture effect better.

MANUAL SEARCH To scan programs by manual.

AUTO SEARCH To scan programs and store all of them automatically.

NOTE

During the searching, you can press [SETUP] button to stop.

11

TV MENU SETUP

CHANNEL

SKIP

SWAP

OK

CHANNEL EDIT

5

NO

_ _

?

Item

CHANNEL

SKIP

SWAP

OK

Description

To select current channel here.

To select "Yes " or "No ", you can select "Yes " to make current channel unaccessible while using [CH+/-] button to browse channels.

Select or enter the channel number directly to swap with current channel.

Highlight this option and press the [OK] button to confirm the swap function.

12

TV MENU SETUP

SYSTEM SETTING

You can setup some system configuration here.

Press [ ] to select " " item and press [ ] or [OK] button to enter the following section:

SYSTEM SETTING

COLOR SYSTEM

SOUND SYSTEM

LANGUAGE

TRANSPARENCY

RESET

AUTO

I

ENGLISH

OFF

SELECT ENTER OK RETURN SETUP

Press [ ] button to select item and press [ ] button to adjust or activate.

Item

COLOR SYSTEM

SOUND SYSTEM

LANGUAGE

TRANSPARENCY

RESET

Description

Can be changed between: "Auto", "PAL" and "SECAM".

Can be changed between:"BG", "DK", "I" and "L" .

Select OSD language.

To change transparency of OSD.

To reset all value to default.

NOTES local TV broadcasting system.

SECAM system is only used by some European countries and districts, such as France.

If the local system is SECAM L, the color system must be selected as "SECAM" and sound system must be selected as "L".

13

TV MENU SETUP

NICAM/BILINGUAL RECEIVING

If you can receive Nicam/bilingual signal, you can operate as follows to enjoy that.

You can select Nicam stereo, mono channel or bilingual through NICAM button on the remote control. If stereo signal is too weak, this unit will switch into mono channel automatically.

When selecting mono channel, "MONO" will show on screen; when selecting bilingual,

"DUAL1" will show on screen; when selecting bilingual II, "DUAL 2" will show on screen and when selecting stereo, " STEREO " will show on screen.

N O T E

Nicam/bilingual function is only effective in TV mode while program coming with Nicam/ bilingual.

14

15

TELETEXT FUNCTION

ZOOM IN TELETEXT

When teletext page shows, you may double zoom in to display this teletext page;

Press [SIZE] button to zoom in the upper half part of teletext page;

Press [SIZE] button again to enter the under half part of teletext page;

Press this button for the third time to return to original display mode.

DISPLAY MODE

Press [REVEAL] button to display the hidden teletext information. Press this button again to cancel teletext information displaying.

SUBPAGE

User could press [SUBPAGE] button to select to the subpage of teletext.

COLORIZED BUTTONS (RED, YELLOW, GREEN, CYAN)

Select the corresponding teletext page through colorized buttons.

16

AV, S-VIDEO, SCART AND YP

B

P

R

SETUP

VIDEO SETTING MENU

When in AV/ S-VIDEO/SCART input mode, there are 6 color system modes for selection:

"Auto", "PAL"," N 3.58", "N 4.43", "PAL60" and "SECAM". Select the right system for your video program. If you do not know which mode your video playback devices and video media is using, you should select the auto mode or you should check and confirm this with your supplier.

The menu setup of AV/S-VIDEO/SCART modes is much the same as that of TV mode, except the " "section is invalid and a little difference in color and sound modes. In order to make this manual pithy and concise, it is not repeated here. You can find it in preceding pages.

And the menu setup of YP B P R is the same as that of VGA menu ,except " "section.

Please refer to posterior pages. The " " section YP B P R used is the same as that of

TV mode. Please refer to P9for it.

NOTE

If no signal input in TV, AV, S-VIDEO, SCART, YP B P R , the screen will show like the following figure.

This unit will go into standby mode automatically with no signal input for more than 5 minutes.

AV

NO SIGNAL

4:50

If the input channel is SCART, this unit will automatically recognise RGB or CVBS signal of SCART; when normal RGB signal appears, this unit will automatically switch into RGB display mode. For this unit is combined by multiple functions, when inserting into SCART socket, it will not automatically switch into SCART mode. You have to select SCART channel through [SOURCE] menu, that is a little different with that of others TV set.

17

VGA SETUP

With the VGA mode supported up to 1024*768@75Hz, and speakers built in, you can use this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup

can be done.

Press [SETUP] button to enter main section. Press [ ] button to select sections and then press [ ] button or [OK] button to enter. If all is done, please press [SETUP] button twice to exit and your setup data will be saved automatically.

P I C T U R E

Press [ ] button to select " ", and press [ ] or [OK] button to enter.

BRIGHTNESS

CONTRAST

COLOR TEMPERATURE

AUTO CONFIG

1024 768 V:75HZ

PICTURE

50

40

SELECT

Press [ ] button to adjust value of item.

ENTER OK RETURN SETUP

Item

BRIGHTNESS

Description

To adjust brightness of picture .

CONTRAST To adjust contrast of picture .

COLOR TEMPERATURE

AUTO CONFIG

Enter sub menu to adjust color temperature of picture. Press

[ /OK ] button to enter.

Auto config horizontal/vertical position, phase and frequency.

Press [ /OK] button to activate.

STATUS

You can see some information about the input video here.

18

VGA SETUP

Here shows the color temperature sub menu.

COLOR TEMPERATURE

USER COLOR

RED

GREEN

BLUE

50

50

50

Press [ ] button to select item and press [ ] button to change and adjust value of item.

Item

COLOR

RED

Description

Select color temperature mode :"User", "C6500", "C8700",

"C9300".

Adjust red value of color temperature

GREEN

BLUE

Adjust green value of color temperature

Adjust blue value of color temperature

S O U N D

Press [ ] button to select " " and press [ ] or [OK] button to enter.

SOUND

SOUND

BALANCE

BASS

TREBLE

BBE VIVA

USER

OFF

40

50

34

SELECT ENTER

OK

RETURN

SETUP

The operation of sound section here is the same as that in TV mode. Please refer to P10.

19

VGA SETUP

M O N I T O R S E T T I N G

Press [ ] button to select " " and press [ ] or [OK] button to enter.

PHASE

FREQUENCY

H-POSITION

V-POSITION

MONITOR SETTING

50

50

49

50

SELECT ENTER OK RETURN SETUP

Press [ ] button to select item and press [ ] button to adjust value of item.

Item

PHASE

FREQUENCY

H-POSITION

V-POSITION

To adjust phase.

To adjust frequency

Description

To adjust screen horizontal position

To adjust screen vertical position

NOTE

If you use this unit as a PC-monitor, and when your PC goes into standby mode, the screen will show as dexter . This unit will go into sleep mode with no signal inputted in 2 minutes.

In this mode, the indicator will remains green, and the screen is turned off. You can wake it up by waking up your PC or pressing

[SETUP] or [SOURCE] button in the remote control.

VGA

NO SIGNAL

1:50

20

VGA SETUP

F U N C T I O N

Press [ ] button to select " ", and press [ ] or [OK] button to enter.

OSD H-POS

OSD V-POS

LANGUAGE

TRANSPARENCY

RESET

ENGLISH

OFF

FUNCTION

50

50

SELECT ENTER

OK

RETURN

SETUP

Press [ ] button to adjust value of item.

Item

OSD H-POS

Description

To adjust the horizontal position of OSD

OSD V-POS

LANGUAGE

TRANSPARENCY

RESET

To adjust the vertical position of OSD

Select OSD language [English]

To adjust transparency of OSD. it can be change from OFF to LEVEL6, 7 levels in total.

Reset all value that related to picture and sound to default .

21

DVD OPERATION

DVD OPERATION

Brief Introduction

DVD provides brand-new AV effect for consumers with its extraordinarily large capacity and outstanding audio-video effects. Its capacity is as high as 4.7-17 GB (approximately 7-26 times the

CD capacity) and horizontal resolution of picture is above 500-line.

Comparison Between DVD and Other Discs

DVD

Recording Method

Capacity

Playback Time

Singlesided

1 layer

4.7G

133min

Digital/MPEG2

Singlesided

2 layers

8.5G

Doublesided

1 layer

9.4G

Doublesided

2 layers

17G

242min 266min 484min

Disc Diameter 12CM/8CM

Horizontal Resolution

500 lines or more

Aspect Ratio

Subtitle

Audio

Multiple

32 types

Linear PCM

Sound Quality 48kHz 96kHz/16 20 24bit

LD

Analog

SVCD VCD

Digital/MPEG2 Digital/MPEG1

650MB 650MB

CD

Digital

650MB

1 side 60min.

2 sides 120min.

30CM/20CM

45min 74min

430 lines or more

12CM/8CM

12CM/8CM

350 lines or more 250 lines or more

One

Max. 16 types

Linear PCM

FM modulation

44.1kHz/16bit 44.1kHz

74min

12CM/8CM

Linear PCM

44.1kHz/16bit

CDROM

Digital

650MB

12CM/8CM

Function Introduction

Multiple languages and subtitles

DVD disc can support as many as 8 dubbing languages and 32 subtitle languages.

Multiple story plots

User can select to play the desired plots (the beginning, development or ending) of the same disc.

Multiple aspect ratios

Multiple aspect ratios support various TV screens.

22

Disc Pictures

4:3

DVD OPERATION

Pan-Scan

TV Screen

4:3

Letterbox

16:9

16:9

Features

This player employs the new generation MTK decode chip with more convenient system and more stable operation. Super error correction slot-in loader with twin laser with good shockproof performance.

Brand-new AV Effects

1 Compatible with MPEG 4 format discs to produce wonderful pictures.

2 108MHz/12bit video DAC with more vivid and brilliant pictures.

4

3 Progressive-scan video outputs to eliminate the flickers hardly overcome by interlacing scan and therefore your eyesight will be well-protected. At the same time, the pictures definition is sharply enhanced and the pictures will be finer, smoother and stabler.

Coaxial digital output terminal.

High Quality Digital Audio

1

2

C oaxial d igital audio output should be connected to power amplifier with DOLBY DIGITAL/DTS decoder.

PCM Digital audio outputs to satisfy the fans' acoustic requirements.

Convenient Functions

1 Direct entry into desired scenes (title/chapter/time/track search).

23

DVD OPERATION

2 Multi-level zoom in/out playback function to provide you with brand-new enjoying way.

3 Multiple aspect ratios to fit TV sets of various screen ratios.

4 Parental lock function to prevent children from watching unsuitable discs.

5 Multiple dubbing languages and subtitle languages bring you the best entertainment status all the time.

Super compatible with VCD, SVCD, CD, HDCD, KODAK PICTURE CD etc.

NOTE: * Some discs labelled with MPEG4 on the market actually are *.rm/*.ra/*.ram/*.rmm and others which are not compatible. Please take care when buying discs.

Compatible Disc Types

Types

MPEG4

DIGITAL VIDEO

Sizes

12cm

12cm

12cm

12cm

12cm

Recorded Contents

DVD: Compressed digital audio + compressed digital video (dynamic picture)

SVCD: Compressed digital audio + compressed digital video (dynamic picture)

MPEG4: Compressed digital audio + compressed digital video (dynamic picture)

VIDEO CD: Compressed digital audio + compressed digital video (dynamic picture)

CD-DA: Digital audio

NOTES

Issues related to

DVD MPEG4 SVCD VCD CD

These icons on the top banner indicate the disc types that the function described in the section applies to.

VCD

DVD Applies to VCD disc

Applies to DVD disc

MPEG4

Applies to MPEG4 disc

CD

Applies to CD disc

SVCD

Applies to SVCD disc

This model do not support the 8cm disc. Do not insert that type of disc into this device to prevent disc jam.

24

DVD OPERATION

PLAYBACK

DVD MPEG4 SVCD VCD CD

1. Power on and switch signal source to DVD mode and the unit begins to work.

2. Place the disc (with label side facing users) to the door and the unit will draw in the disc automatically.

The unit begins to read disc information.

STANDBY

PLAY

EJECT

STOP

3. Press [PLAY] button to begin playing disc.

When the unit playing a disc, press[ ] button the firs time and the unit enters pause state, while press [ ] button again and the unit resumes playback.

4. Press [STOP] button to stop playing.

When the unit is playing a disc, press [ ] button the first time and the unit enters pre-stop state, while press [ ] button again and the unit enters stop state.

At the pre-stop state, if you press [ ] button, the unit will continue to play from the stopped point.

At the stop state, if you press [ ] button, the unit will play from the beginning point of the disc.

Press [ ] button when playing MPEG4 discs and the unit enters stop state directly.

5. Press [ ] button to take out disc.

6. When finishing playing, switch signal source to other working state and press [ ] button to make the unit enter standby state. Please pull out the power plug from power socket when not using the unit for a long time.

[EJECT] button is effective only when selecting DVD signal source. In other signal source ,such as TV, AV, etc, this button is invalid.

VOLUME CONTROL

DVD MPEG4 SVCD VCD CD

1. Press [VOL+/VOL-] buttons to adjust volume.

2. Press [VOL+/VOL-] buttons on the remote control of this unit.

Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the maximum volume is 100.

VOL +

VOL

-

25

DVD OPERATION

VCD, SVCD MENU PLAYBACK

SVCD VCD

When playing SVCD, VCD2.0 discs with menu playback function, you may enjoy simple menu playback alternation function. You may set menu playback state in the setup menu and select menu playback or sequence playback.

For instance, VCD 2.0 disc menu playback.

1. TV screen displays main menu.

1.

2.

Press number buttons to select. For instance, press number button 1 to select main menu 1.

1.

2.

2. After entering main menu 1, TV screen displays submenu.

3. Press [ ], [ ] buttons to turn pages.

1.

2.

3.

4.

5.

4. Press number buttons to select submenu content. For instance, press number button 5

and the unit begins to play the fifth track.

1.

2.

3.

4.

5.

5. When playing, pressing [DISC MENU] button to return to the root menu.

PLAY

4

7

1

8

0

2

5

3

6

9

OK

DISC MENU

26

DVD OPERATION

DIRECT PLAY

Direct play is a creative function that very helpful for users to enjoy DVDs. With direct play function, you can play DVD directly, skipping the legal warning, advertisements, chapter selection and other thing that come before the movies start. You can enjoy pure movies without bothering.

When the disc is loaded and the legal warning, advertisements, chapter selection message shows, just press [ ] button to activate direct play function and start a pure movies playback.

DIRECT PLAY

NOTE

When you are enjoying VCD with PBC function, direct play can disable the PBC and VCD will be played in sequence.

MEMORY

DVD

1. This player can save the currently played time point automatically when you leave the current

DVD disc playback (switch from DVD to card read state, switch from DVD signal source to

other signal source, enter standby state in DVD mode).

2. When switching to DVD playback state again, this player can automatically search the time point

saved last time to continue playing. If you want to play from the beginning, please press [STOP]

button twice and then press [PLAY] button.

NOTE

This player may save one DVD disc for one time.

The DVD disc played the last time will be saved, and the former saved contents will be cleared by new saved contents. lf power is cut off unexpectedly, the DVD disc played currently will not be saved.

27

DVD OPERATION

SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS

DVD SVCD VCD CD

1. Insert disc, after disc reading and normal playback, press number buttons to select track to play directly.

If track number is less than 10, press number buttons 1 to 9 to directly select. For instance, select the seventh track: 7

If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.

1 + 6

For instance, select the 16th track

-/-6

If track number is more than or equal to 20, press [-/- -] button twice and then number buttons

0 to 9. The rest can be performed by analog.

NUMBER

1

4

7 8

0

2

5

3

6

9

SELECT LANGUAGE/AUDIO

DVD SVCD VCD CD

1. Press [LANGUAGE] button.

As for DVD and SVCD discs with multiple languages, you may select the desired language when playing.

DVD disc:

Audio 1/2 Chinese Audio 2/2 French

SVCD disc:

Audio 1

Audio 4

Audio 2

Audio 3

As for VCD or CD disc with multiple channels, you may select audio output from left or right channel or select stereo audio output. For VCD disc, left channel records dubbing and right channel records singing, and you may select left channel for dubbing.

VCD, CD disc: Mono Left Mono Right

Stereo

LANGUAGE

NOTE

Language type varies with disc recording.

For VCD story disc with double languages, you may press [LANGUAGE] button to select the desired language.

When playing some DVD discs, pressing [LANGUAGE] button to switch language may result in playing the track from its beginning.

28

DVD OPERATION

REPEAT PLAYBACK

DVD MPEG4 SVCD VCD CD

The repeat playback function enables a certain title/chapter/track/disc repeated.

1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions.

DVD DISC:

Chapter Title ALL Repeat Off

SVCD, VCD, CD discs:

To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1,

CD discs, the repeat function may be directly operated.

Track ALL Repeat Off

To SVCD, VCD2.0 discs, the repeat function cannot be operated in menu playback mode.

REPEAT

REPEAT PLAYBACK OF SELECTED SEGMENT

DVD MPEG4 SVCD VCD CD

When playing disc, you may press [A-B] button to play your desired segment content repeatedly.

1. In normal playback, press [A-B] button at the beginning point (point A) of the segment that you desire to play repeatedly.

TV screen displays:

A

2. In normal playback, press [A-B] button at the ending point (point B) of the segment that you desire to play repeatedly.

AB

TV screen displays:

The unit automatically returns to point A and begins to play the selected segment (A-B).

3. Press [A-B] button for the third time.

The unit restores to normal playback.

A-B

NOTE

The A-B repeat function may be invalid to some discs. In menu playback mode, the segment can only be selected in the track.

29

DVD OPERATION

FAST PLAYBACK

DVD MPEG4 SVCD VCD CD

When playing discs, you may select fast forward or fast backward playback to search a certain point.

1. Press [ ] button and the unit begins fast forward playback.

Press [ ] button each time and the disc playback speed switches in the following sequence circularly:

2X 4X 8X

32X 16X

2. Press [ ] button and the unit begins fast backward playback.

Press [ ] button each time and the disc playback speed switches in the following sequence circularly:

2X 4X 8X

32X 16X

PLAY FROM THE DESIRED POSITION

DVD MPEG4 SVCD VCD CD

Play DVD disc

Inputting a certain time, title number or chapter number directly may search in the disc fast and then play forward from this position.

1. Search title and chapter. For instance, search the 2nd chapter in title 6.

Press [GOTO] button and TV screen displays:

Title 03/30 Chapter /02

Press [ ] button to move cursor and lighten the title number, shown in the figure:

Title /30 Chapter 01/02

Then press number button 6 to select Title 6, shown in the figure:

Title 06 /30 Chapter /02

Finally press number button 2 to select Chapter 2, shown in the figure:

Title 06 /30 Chapter 02/02

2. Search title time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.

Title 06/30 Time : :

3. Search chapter time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.

Chapter 01/04 Time : :

30

DVD OPERATION

Play MPEG4 disc

1. Select track

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input the track.

Select

2. Search track time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.

-:--:--

Play SVCD, VCD and CD discs

1. Search disc time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input minute and second.

Disc Go To --:--

2. Search track time

Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input minute and second.

Track Go To --:--

3. Select the track

Press [GOTO] button until TV screen displays the following figure. Press number buttons to input track.

Select Track -- /15

GOTO

ZOOMING THE DISPLAYED FRAME

DVD MPEG4 SVCD VCD

Zoom in/out the player frame.

1. When playing a disc, press the [ZOOM] button can open the zoom in/out function, and the

TV screen displays( take X2 mode as an example):

The frame is magnified to 2 times of the normal size.

2. Press the [ZOOM] button continually, all the magnified/ minified modes display on the screen in turn. The magnified/ minified modes includes:X2,X3,X4,X1/2,X1/3,X1/4.

3. When the mode is on X1/4, press [ZOOM] button to close the zoom in/ out function, and the frame restores normal size.

4. When the fame is magnified, press the [ ] buttons to move the frame.

ZOOM

31

DVD OPERATION

MPEG4 AND JPEG FILE PLAYING

MPEG4 is the audio standard published by MPEG(Moving Pictures Experts Group) in November,

1998. As the discrepant parts between frames of picture are only processed and the same parts are deleted, the data number are greatly decreased. The most distinct feature of MPEG4 is the high compression and clear imaging. Furthermore, MPEG4 provides elastic specifications to adjust the stream according to the used requirements. The larger stream can be used when collecting private films; and the small stream can be used in network transferring, which make MPEG4 use widely.

JPEG(Joint Photographic Experts Group) is the most widely used picture compression and storage format today. Utilizing high efficiency compression algorithm, JPEG compresses the original picture 15 to 20 times with excellent picture quality. JPEG is featuring small size data, convenient application and supported by most picture processing software, so it is very fit to store photos.

The strong decoding capability of this unit can decode and play the files with the above formats.

In the course of playing, an operation menu will appear and its construction is shown as follows.

00:00 00:00

004/369

\PIC\

..

Du000

Du001

Du002

3

4

5

6

1

2

State window

Display the current state

information.

Indicate the current file's position.

Display the current path.

JPEG image preview.

Display the current path's Display the current operation

file.

prompts.

The state information in state window is as follows:

1 2 3 4

2 Total playback time

00:57 03:31 128

002/073

sometimes it is VBR.)

5 6

32

DVD OPERATION

1. Play MPEG4 file

After you put an MPEG4 format file into the unit, it will search disc information and display the operation menu as figure A (The displayed content varies with disc.).

A:

00:00 00:00

001/004

\

Du000

Du001

Du002

Du003

B:

00:00 00:00

001/369

\Du000\

..

A/V

A/V

MP000

MP001

A/V MP002

Press [ ] button to select the directory you desired and press [OK] button to confirm.

For instance, you select the directory Du000 in Figure A, press [OK] button and TV screen displays as in Figure B. The window returns to the previous directory when you select [ ....] or press [ ] button.

In Figure B, press [ ] button to select the MPEG4 format file you desired and press [OK] button to confirm. The unit begins to play MPEG4 format movie.

2. Play JPEG file

After you put an JPEG format file into the unit, it will search disc information and display the operation menu as in the following figure. After selecting JPEG file, the preview window will appear this file's preview image to facilitate you to select. After you select the JPEG file you desired and press [OK] button to confirm, the picture will display in full screen.

00:00 00:00

004/369

\PIC\

..

Du000

Du001

Du002

RESOLUTION 640 480

Other basic operation methods

1. Press [ ],[ ] button may turn to the next or last page.

Other functions of JPEG file

1. When playing JPEG file, pressing [SUBT] button may switch different JPEG display modes

which have 16 kinds for selection.

2. When playing JPEG file, press [ZOOM] button to enter zoom in/out, and press it again to

stop this function.

3. When in zoom in/out, pressing [ ] button may magnify the picture and it can magnify the frame

twice at most as the original one. Pressing [ ] button may minify the picture and it can minify

the frame half at most as the original one.

33

DVD OPERATION

4. When playing JPEG file, pressing [ ] button may realize preview playback function.

At the same time, all JPEG files are displayed on TV screen. One frame can display up to

12 pictures at most. The rest ones are shown on the next frame. Pressing [ ] button may

enter the next frame and [ ] button may enter the previous frame. You may press number

buttons or [ ] button to select the picture you desired and press [OK] button to confirm.

5. When in preview playback, pressing [DISC MENU] button may exit preview playback function.

6. When playing JPEG file, pressing [ ] button may realize picture rotation button.

NUMBER 4

7

1

8

0

2

5

3

6

9

UP

DOWN

DISC MENU

SUBT

NOTE

When buttons are invalid, TV screen displays:

OK

ZOOM

Please press effective button again.

34

DVD FUNCTION SETUP

VIDEO SETUP

Video Setup Page

Sharpness

Brightness

Contrast

Hue

Saturation

Gamma

Go To Video Setup Page

Low

00

00

00

00

Off

1. Sharpness: this item is used to set the sharpness of video outputs.

Optional settings: High, Medium, Low; Default: Low

2. Brightness: this item is used to set the brightness of video outputs.

3. Contrast: this item is used to set the contrast of video outputs.

4. Hue: this item is used to set the hue of video outputs.

5. Saturation: this item is used to set the saturation of video outputs.

How to adjust brightness, contrast, hue and saturation:

A. In picture setup page, press [ ] button to select the item to be adjusted and press [OK] button to enter the corresponding item adjustment.

B. Press [ ] button to adjust the setup item.

C. After adjustment finishes, press [OK] button to return to picture setup page.

6. Gamma correction: this item is used to set the Gamma value of video output.

Optional settings: High, Medium, Low, Off; Default: Off

INITIAL SETUP

Preference Page

TV Type

PBC

Audio

Subtitle

Disc Menu

Parental

Password

Default

Go To Preference Page

PAL

On

Thai

Thai

Thai

Off

1. TV system: this item is used to set the unit's video output system.

Optional settings: Auto, PAL, NTSC; Default: PAL

2. PBC: this item is used to set PBC state.

When playing SVCD, VCD2.0 discs, if PBC is set On, this unit enters PBC playback mode; if PBC is set Off, the unit plays the disc according to track sequence.

Optional settings: On, Off; Default: On

3. Audio: this item is used to set the preference audio language when playing.

4. Subtitle: this item is used to set the preference subtitle language when playing.

5. Disc menu language: this item is used to set the preference disc menu language when playing.

Default of disc menu language: Thai

Default of subtitle: Thai

36

DVD FUNCTION SETUP

NOTE

Audio, subtitle and disc menu language are only effective to DVD disc.

If the disc is not recorded with the language you appointed, the unit will apply the language that the disc appointed to play.

Select other languages: press [ ] button to move cursor to "OTHER" item, press [OK] button and then number buttons to input the language code you desired. After input finishes, press

[OK] button again.

6. Parental: this item is used to set the parental control ratings to prevent children from watching the restricted contents. (In case the disc supports this function)

Optional settings: KID SAFE, G, PG, PG 13, PGR, R, NC17, ADULT, Off; Default: Off

NOTE

When changing the parental control ratings, a password is needed. Please refer to the following password item for details.

7. Password: this item is used to set a four digital password to enable you to change the parental control ratings.

Default: 7890

Old password

New password

Confirm PWD

OK

8. Default: this item is used to restore all settings to the default value except "Parental control"

37

CARD READER AND USB OPERATION

USAGE OF USB EQUIPMENT AND 3 -IN-1 CARD READER

USB refers to Universal Serial Bus.

Most of USB devices on the market are USB1.1 or USB2.0.

There are some types USB 1.1 devices:

Monitors Communication devices Audio Human Input Device(HID) Mass storage.

Most flash memory ,USB HDD ect. belongs to Mass Storage Class . Mass Storage Class includes

2 transport manners:

1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport

2. USB 1.1 Mass Storage Class Bulk-Only Transport

This unit supports USB 1.1 Mass Storage Class Bulk-Only Transport, we are not sure that other USB devices can be supported! So please find out about the features of USB equipments before using it.

When using USB 1.1 Mass Storage Class Bulk-Only Transport devices, please notice the file operation system supports Windows FAT ,not support FAT32 and NTFS ect. file system.

The 3-in-1 card reader of this player can read SD Card (Secure Digital Card), MMC Card (Multi

Media Card) MS Card (Memory Stick Card) .

Important: Before you use the USB and card reader function, you should change the input source of this unit to DVD.

1. Play USB Equipment:

Please insert USB equipment into the USB jack of this unit firstly, press [CARD/DISC] button and a selection menu appears on screen. You may press [CARD/DISC] or [ ] button to select. If the cursor stops in "USB" item, you may press [OK] or [PLAY] button to confirm.

After correctly reading USB equipment data, the screen will display an operation menu. Please refer to the part of "MPEG4 and JPEG FILE PLAYBACK" in page 32 for details.

USB jack

MEDIA CARD socket

2. Play 3-in-1 CARD READER

Please insert the FLASH card supported by this player into the port of card reader, press [CARD/DISC] button and a selection menu appears on screen. You may press [CARD/DISC] or [ ] button to select. If the cursor stops in "CARD READER" item, you may press [OK] or [PLAY] button to confirm. After correctly reading card reader equipment data, the screen will display an operation menu. Please refer to the part of "MPEG4 and JPEG

FILE PLAYBACK" in page 32 for details.

After pressing [CARD/DISC] button to display the selection menu, if you do not want to switch equipment, please move cursor to the original one, and then press [OK] or [PLAY] button, or wait until the menu disappears automatically.

UP

DOWN

CARD/DISC

If you want to use DVD function, please select "DVD" through the above-mentioned operation steps to exit USB and card reader functions.

38

TIME SETTINGS

TIME SETTING

At any display mode you press [TIMER] button, calendar will show on the screen,

CALENDAR

2005-04-03 12:13:35

SUN MON TUE WED THU FRI SAT

1

2

9

16

23

30

3

10

17

24

4

11

18

25

5

12

19

26

6

13

20

27

7

14

21

28

8

15

22

29

SET TIME

SET TIMER ON

SET TIMER OFF

Item

SET TIME

Description

Press [ /OK] button to go to the set time sub menu.

SET TIMER ON Press [ /OK] button to go to the set timer on sub menu.

SET TIMER OFF

Press [ /OK] button to go to the set timer off sub menu.

Use [ ] button to choose which value to change and use [ ] button to change it. When new value is set, press [TIMER] or [OK] button to exit and the value will be saved immediately.

YEAR

MONTH

DATE

HOUR

MINUTE

SET TIME

05

04

03

12

21

You can set two timers for power on. That means you can power on your LCD TV two times a day automatically.

You can set the hour and minute for auto power on here.

HOUR 1 and MINUTE 1 set for the TIMER 1 for auto power on,

ACTIVATE 1 can be set for activate setting for TIMER 1.

SET TIMER ON

HOUR 1

MINUTE 1

ACTIVATE 1

00

00

OFF

You can choose ON/OFF and ONCE on ACTIVATE 1.

When ON is selected, timer 1 will always enable auto powering on .

When you select OFF ,timer function will be disable .If you select

"ONCE", timer 1 will enable auto powering on and, after it powers

HOUR 2

MINUTE 2

ACTIVATE 2 on automatically for the first time, the setting will go to "OFF" automatically.

40

00

00

OFF

TIME SETTINGS

HOUR 2 and MINUTE 2 set for the TIMER 2 for auto power on ,ACTIVATE 2 can be set for activate setting for TIMER 2.

You can choose ON/OFF and ONCE on ACTIVATE 2.

When ON is selected, timer 2 will always enable auto powering on . When you select OFF ,timer

function will be disable .If you select "ONCE", timer 2 will enable auto powering on and, after it

powers on automatically for the first time, the setting will go to "OFF" automatically.

You can set the hour and minute for auto powering on here

And you can set the " "

" "

" " timer will disable powering off .

"

HOUR

SET TIMER OFF

00

MINUTE

ACTIVATE

00

OFF

" "

If you select "ONCE", timer will enable auto powering off and, after it powers off automatically for the first time, the setting will go to "OFF" automatically.

NOTE

When you have set the " TIMER OFF " activated, a message will show when it is 1 minute left for powering off like: " STANDBY : 59S " . If you press [ TIMER] button during this status, you can cancel the power off this time. When the number is decreased to 0, this unit will go to standby mode automatically .

When you set the ACTIVATE ON or ONCE, and the calendar's time comes to the timer's value, power on and power off event will occur; For example: If you set the POWER ON

TIMER to 9:00, ACTIVATE ON, then when time in calendar goes to 9:00, this unit will power on from standby mode automatically.

41

DVB OPERATION

Power on and switch signal source to DVB mode and the unit begins to work.

Press the [DVB MENU] button, the Main Menu will be displayed, in which you can set your preferences,

Search for channels, edit the channels list or your favourite list , viewing Programme Guide

Information, etc.

It is easy to see that the Main Menu is composed of six parts: General Setting, Advanced Setting,

Auto Search, Manual Search, Channel Setting, EPG.

Note: Select different item using the[ ]button ,and press [OK] button to enter it.

GENERAL SETTING

You can set censorship, Language, and all other items suitable for your environment.

Note: Press [OK] button to enter the following menu.

Press the [DVB MENU] button to return to the

previous menu or to exit the menu screen.

Antenna Power OFF

InfoBar Duration

When you switch channels, the infobar will be automatically displayed ,but it will hide after a

few seconds. You can set the duration during which the infobar is to be displayed .

1s the infobar will automatically hide after 1 second

3s the infobar will automatically hide after 3 second

5s the infobar will automatically hide after 5 second

7s the infobar will automatically hide after 7 second

9s the infobar will automatically hide after 9 second

Note: If you press the [INFO] button to display the infobar, it will not automatically hide.You

should press the [INFO] button again to hide it.

Time zone

To choose you time zone, it is set depending on your country.

The current time is set automatically whenever GMT Offset changes.

Note: It may have been setup in Installation Wizard step1 When you powered on the receiver

for the first time after purchasing.

Audio Output

You can set the Audio output, select one option form Stereo / Left /Right/Mono.

Antenna Power

Choose ON ,if you have an active ANTENNA but without an external DC supply. In this case, the ANTENNA will be powered by the receiver.

**

42

DVB OPERATION

Choose OFF to shut off the Antenna power ,if you have a passive or a self powered active

ANTENNA .

Warning: You should never shortcut the antenna jack, it may cause injury or damage some unit.

The receiver is only able to supply DC 5V/50mA(MAX), never connect heavy load to the receiver, it may cause damage.

ADVANCED SETTING

You can set parental control for each programme . You can also change your password.

Note: When a prompting message is displayed to request your password, enter the password

using the Number(0-9)button, then press [OK] button to enter.

Censorship setting

Censorship Classification allows you to block programmes according to the age level you have set.

View All All programmes can be watched because there is no age limitation.

7 Programmes are blocked for children under the age of 7.

10 Programmes are blocked for children under the age of 10.

14 Programmes are blocked for children under the age of 14

16 Programmes are blocked for children under the age of 16.

18 Programmes are blocked for children under the age of 18.

Note: You have to enter Password to watch the programme which is blocked by the age level.

Change Password

Press the[ ] or [OK] button to changed password.

New Password

Enter New Password using the NUMBER(0-9)button.

New password

* * * * * *

Enter Again

Enter the New Password again to confirm the Verify Password.

Enter again

* * * * * *

43

Error

Error

DVB OPERATION

Note: The Default Password is "000000". If you have forgotten your Password, please contact

your local product distributor.

Clear Channels

If you just want to delete the Channel List, select the Clear Channels item.

1. Select the Clear Channels item using the[ ] or press [OK] button.

2. A prompting message will be displayed to request your confirm, select YES and press the

[OK] button to confirm.

3. Select NO or press the [DVB MENU] button to return if you want to abort.

System Info

You can select to view all system information.

AUTO SEARCH

If your receiver is connected to the aerial and television, you can automatically search

channels without entering any other information.

Select the Auto Search item using the[ ] or press [OK] button to start searching.

The searching result will be displayed in the Search Result window.

Wait while the receiver searches for the channels, this may take a few minutes.

Note: If you press the [DVB MENU] button during searching, the operation is stopped and

the channels found until then will be saved.

If search operation is successfully completed, and the channel does not exist, try to

reset the search operation again if necessary.

Warning: Once you press [OK] button to start auto search operation, all the saved channels

will be cleared.

44

DVB OPERATION

MANUAL SEARCH

You can search channels manually by searching parameters.

Note: Select different item using the[ ]button, Press the[ ]button to do your setting.

Press the [DVB MENU] button to save the changes and return to the previous menu.

Channel

Select your desired frequency channel to search using the [ ] button. When entering frequency channel value, the appropriate frequency value is entered.

Frequency

Enter the your desired frequency to search directly by using the number(0~9) button.

Search Mode

Switch the Search Mode between All Channels and Free Channels.

All Channels When search operation is successfully completed ,all the channels found

will be saved.

Free Channels When search operation is successfully completed ,only the free channels

will be saved.

Update Mode

Switch the Search Mode between Replace and Append.

Replace Before start searching new channels, all the saved channels will be cleared first.

Append The saved channels will not be deleted .

NIT Search

If specified frequency channel information and other channel information are provided together the channel which belongs to other frequency channel, is also searched.

Select either Enable or Disable the NIT Search.

45

DVB OPERATION

After finishing all the setting above ,select the Search item to start searching.

The searching result will be displayed in the Search Result window.

Note: If you press the [DVB MENU] button during searching, the operation is stopped and

the channels found until then will be saved.

If search operation is successfully completed, and the channel does not exist, try to

reset the search operation again if necessary.

CHANNEL SETTING

This chapter describes how to edit channels.

Note: Press [ ] or [OK] button to enter the following menu. Press the [DVB MENU] button

to return to the previous menu.

Channel Edit

You can edit all channels in the Channel list.

Note: Select the different edit modes(delete and move) using the the [ ] button.

46

DVB OPERATION

Channel Sort

You can sort all TV or Radio channel lists by channel ,name or free/scrambled.

Note: Select the different sort ways using the [ ]button, then press [OK] button to confirm.

Ascending Sort Channel lists are sorted by channel name from A to Z.

Descending Sort Channel lists are sorted by channel name from Z to A.

Free First Free channels will be placed on the top of the list.

Scrambled First Scrambled channels will be placed on the top of the list.

Favourite Edit

You can edit Favourite channel .

Press [OK] button select you favourite channel ,and press [OK] button to set the you selected channel as favourite channel .

EPG

The Programme Guide displays programme information about each channel, based on the date and time.

You can press [ ] button to switch the channel, and press [ ] button to view the current day or the next day programs and information, if there is the current day and the next day program and information.

47

TROUBLESHOOTING

Please check for causes of problems in accordance with the following chart before contacting any maintenance personnel.

DISPLAY TROUBLESHOOTING

Symptom

Black screen, power indicator light off

Image display flicker, unstable

Causes and Correction

Check whether power cord is well connected, and whether this unit is power on

Check whether the signal cord of input device is well connected

Check whether input device is power on

Check whether the input device signal is in this unit's specification

Check computer output mode: control panel-display-setup

If the setup does not accord with this unit's specification, please change the display setup

Max display mode: @ 75 Hz

SOUND AND TV TROUBLESHOOTING

Symptom

Cannot power on

No sound

Volume too low

Snowy picture

Remote control failure

Causes and Correction

Please make sure the well connecting of power cord

Please make sure the well connecting of audio cord

Check volume

Make sure there is nothing plugged in the headphone jack

Check volume

If volume is still too low when adjusting volume to maximum, please check whether the input device is well set

Input antenna damaged or not well connected

Check whether remote control battery used up

Whether battery installation is correct

Whether obstacles exists between remote control and the unit's receiving window

Check whether receiving window has strong light

48

TROUBLESHOOTING

DVD TROUBLESHOOTING

Symptom Causes Correction

Not play

1. Condensation on laser head

2. Disc not properly loaded

3. Disc not compatible with the unit

1. Switch on power and wait for 1 to 2 hours

2. Make sure label side of the disc facing up

3. Confirm whether this unit compatible with

the placed disc

Sound distortion

1. Too large volume of connected device

2. Sound field mode not suitable for

disc

1. Disc warped or dirty

No sound

2. The unit in mute state

1. Adjust the device volume

2. Adjust appropriate sound field

1. Clean the disc

2. Press MUTE button to cancel it.

No image 1. TV not set for proper system 1. Reset AV/TV state of TV

No color

1.

TV system not right

2.

TV color not well adjusted

1. Try to change the color system

2. Reset the TV color

No disc reading

1. Disc warped or dirty

2. Disc not correctly placed

3. Condensation on laser head

1. Mal-fabricated disc used

Temporary function failure

2. Wrong buttons pressed

3. Static leakage into the unit from

outside

1. Clean the disc

2. Reload a disc with label side facing up

3. Witch on power, unload disc and leave

it for about 1 hour

1. Wait for 5 to 10 seconds to restore to

normality automatically

2. Operate again

3. Power off for 1 to 2 minutes to power

on again

No subtitle

1. No subtitle made in disc

2. The unit subtitle is turned off

Image rolling

1. System setup not suitable

for disc

1. Disc problem

2. Press SUBT button to select it

1. Adjust system mode

If the above methods still cannot solve the problems or the troubles are special, please contact the local maintenance personnel.

49

SPECIFICATIONS

LCD screen

Size

Display proportion

Type

Pixel distance

View angle

15.0 (diagonal)

304.1 mm(H)X228.0 mm(V)

TFT color

0.297 mm(H)X0.297mm( V)

80(L)/80(R)/80(T)/55(B)

Frequency

Display mode

Hor scanning frequency

Ver scanning frequency

Display color

Recommended mode

Max mode

16.7M

color

1024X768@75 Hz

Panel Life

Input signal

Hours

Synchronous signal

50,000

H/V separation, TTL positive/negative

H/V composite, TTL positive/negative

Video signal

TV/Video

Power Supply

Image system

Audio system

Video form

Adapter input

Adapter output

PAL/SECAM/NTSC(In video mode)

DK/I/BG/L

CVBS S-VHS, RGB, YPbPr, VGA

_

_ _ _ 12V/4.5A

Unit/net weight LXWXH 438.7mmX163.1mmX295.7mm/7.0kg

Environmental factor

Working temperature

Working humidity

Storing temperature

Storing humidity

5 C ~ 35 C

-20 C ~ 45 C

Audio parameter

Audio input

Frequency response

3.5 jack(L,R), 0.5 0.3 Vrms

DVD

Disc type

Output

DVD VIDEO

MPEG4 *

SVCD

**

VCD1.0, 1.1, 2.0 version; CD-DA

Analog audio output, coaxial digital audio

Output, composite video output

DVB

Input connector IEC-Type, IEC 169-2, Female

IEC-Type, IEC 169-2, Male (loop throughout)

Frequency range (VHF/UHF)

Channel range(VHF/UHF) 7 & 8 Mhz

Hint: the items with " " symbol are related to LCD screen. Specifications and design are subject o change without notice.

* Some discs labelled with MPEG 4 on the market actually are * .rm/* .ram/* .rmm and others which are not compatible. Please take care when buying discs.

* * This unit cannot play some SVCD discs with VCD format.

Because of disc quality and format difference, we cannot make sure smoothly read all discs; some functions cannot be fulfilled for the disc speciality, but not machine trouble.

As for weight and size, please take actual object as standard.

50

DISPLAY MODE

Resolution

640 350

720 400

640 480

640 480

640 480

800 600

800 600

800 600

800 600

1024 768

1024 768

1024 768

SUPPORTED PC INPUT MODE

Hor scanning frequency Ver scanning frequency

(KHz) (Hz )

Pixel frequency

(MHz)

37.5

35.1

37.9

48.1

31.5

31.5

31.5

37.9

46.9

48.4

56.5

60.0

75.0

56.2

60.0

72.0

70.0

70.0

60.0

72.0

75.0

60.0

70.11

75.0

25.17

28.32

25.18

31.50

31.50

36.00

40.00

50.00

49.50

65.00

75.00

78.75

NOTES

This product does not support the display mode not listed above. In order to achieve the best display effect, please select the above-listed 12 display modes input signal.

Because of the difference of display card output signal (especially non-standard signal output), the display image may appear little disturbance which can be adjusted through

" AUTO CONFIG " in the "PICTURE" menu by users.

To prolong this unit's service life, you are suggested to use power management function of computer.

Format

DOS

DOS

DOS

VESA

VESA

VESA

VESA

VESA

VESA

VESA

VESA

VESA

51

DISPLAY MODE

Format

720X480

720X480

720X576

720X576

SUPPORTED VIDEO INPUT MODE

Hor scanning frequency Ver scanning frequency

31.47

15.734

31.25

15.625

59.94

59.94

50

50

Vert scan type

480P

480i

576P

576i

NOTE

Specifications and design are subject to change without notice.

52

ACCESSORIES

Please check the following accessories.

Operational Manual

User manual Remote control and battery

Coaxial digital audio cord Power adaptor

Wall Mount Holder Kit AK556(optional)

Wall Mount Holder Kit AK558(optional)

Kickstand Kit

Audio cord

AV cord

5195201 V0.0