QuickSpecs HP ProLiant DL360 Generation 5 Overview

QuickSpecs

Overview

HP ProLiant DL360 Generation 5

1. Low-profile x8 PCI-Express slot

2. Eight PC2-5300 FB-DIMMs (DDR2 667) slots

3. Up to two Intel Quad-Core or Dual-Core Xeon™ processors

4. Slide-out System Insight Display

5. Slimline removable media bay

6. Up to six SAS/SATA hot plug drive bays

7. Removable fans for easy serviceability

8. Choice of Smart Array P400i Controller or Smart Array

E200i Controller

9. Redundant Hot Plug Power Supplies (upgradeable option)

10. Full length/height x8 PCI-Express Slot (optional PCI-X)

What's New

New Quad-Core Intel Xeon 5300 sequence processor models are now available (E5320, E5310 both with 8M

(2x4MB) L2 Cache, and 1066 FSB

At A Glance

Combining concentrated 1U compute power, integrated Lights-Out management, and essential fault tolerance, the DL360 is optimized for space constrained installations. Dual-core Xeon processors, DDR2 Fully Buffered DIMMs, Serial Attached

SCSI (SAS) and PCI Express technology provide a high performance system ideal for the full range of scale out applications. What's more, the HP ProLiant DL360 G5 steps up the fault tolerant in an ultra dense platform with redundant power, redundant fans, mirrored memory or online spare memory, embedded RAID capability, and full-featured remote

Lights-Out management.

Processors:

Up to (2) Quad-Core or Dual-Core Intel® Xeon® processor 5000 sequence

Intel 5000P chipset supporting up to a 1333MHz front-side bus

Memory:

Up to 32 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs (DDR2-667); 4:1 interleaving; memory mirroring; online spare

Storage Controller:

Performance Models: HP Smart Array P400i/256MB BBWC Controller (RAID 0/1/1+0/5/6) (512MB BBWC optional)

Base Models: HP Smart Array P400i/256MB Controller (RAID 0/1/1+0/5) (512MB BBWC optional)

Entry Models: HP Smart Array E200i/64MB Controller (RAID 0/1/1+0) (128MB BBWC optional)

Internal Drive Support:

Up to (6) small form factor (SFF) hot-plug drive bays

Slimline media bay supporting DVD, CD or Floppy drive

Network Controller:

DA - 12476 U.S. QuickSpecs — Version 15 — 12/21/2006 Page 1

QuickSpecs


Overview

Embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine, including support for

Accelerated iSCSI and RDMA through optional ProLiant Essentials Licensing Kits

Expansion Slots:

Two PCI-Express expansion slots: (1) full-length, full-height slot; (1) low-profile slot

Front or rear accessible video port

USB 2.0 Ports:

4 Total: (1) front, (1) internal and (2) rear accessible ports

Redundancy:

Multiple layers of fault tolerance through critical component redundancy (power supply and fan redundancy), mirrored memory, embedded RAID capability, and full-featured remote Lights-Out management

Management:

New Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared network access

HP Power Meter and Power Regulator for ProLiant, delivering integrated power monitoring and server level, policy based power management with industry leading energy efficiency and savings on system power and cooling costs

Convenient slide-out Systems Insight Display for quick and easy front view server diagnostics

ProLiant Essential Foundation Pack standard, including HP Systems Insight Manager, SmartStart, SmartStart

Scripting Toolkit, Subscriber's Choice and ROM Based Setup Utility (RBSU)

Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager, Status

LEDs including system health, UID, and SmartStart

Form Factor:

1U Rack form factor (1.75"), less than 28 inches (70.5 cm) deep

Deployment/Serviceability:

Sliding rails for in rack servicing ship standard; optional ambidextrous cable management arm

Warranty:

Protected by HP Services and a worldwide network of resellers and service providers. Three-year next business day, on-site limited global warranty. Certain restrictions and exclusions apply. Pre-failure notification on processors, memory, and SAS hard drives. SATA hard drives have a one-year warranty.


QuickSpecs

Standard Features


NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information –

Factory Integrated Models" section.

Processor

One of the following depending on Model

Quad-Core Intel Xeon Processor E5320 (1.86 GHz 80 Watts, 1066 Front Side Bus (FSB))

Quad-Core Intel Xeon Processor E5310 (1.60 GHz 80 Watts, 1066 FSB)

Dual-Core Intel Xeon Processor 5160 (3.0 GHz, 80 Watts, 1333 FSB)


Dual-Core Intel Xeon Processor 5148 (2.33 GHz, 40 Watts, 1333 FSB, Low Voltage)





Dual-Core Intel Xeon Processor 5080 (3.73GHz, 130 Watts, 1066 FSB)

Dual-Core Intel Xeon Processor 5060 (3.2GHz, 130 Watts, 1066 FSB)

NOTE: Up to 2 processors supported. Performance configurations include two processors.

NOTE: Intel 5300 sequence processors are 64-bit, Quad-Core, and supports Intel VT technology.

Intel 5100/5000 sequence processors are 64-bit, Dual-Core, and supports Intel VT technology.

Cache Memory


8MB (2 x 4MB) Level 2 cache (5300 sequence)



Upgradeability

Chipset

Upgradeable to quad or dual processing

Future upgradeable to Xeon Series 5300 Quad-Core, or 5100 Dual-Core processors

Intel 5000P chipset

NOTE: For more information regarding Intel chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/ .

Memory Protection &

Functionality

Advanced ECC (multi-bit error protection), Online Spare, Mirroring

4-way interleaving

Memory

Type

Standard (Entry or Base

Models)

Standard (Performance

Models)

PC2-5300 Fully Buffered DIMMs (DDR2-667)

1 GB (2 x 512 MB)

2 GB (2 x 1 GB)

Maximum 32 GB (8 x 4 GB)

NOTE: Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at

667 MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will run at 533 MHz.

Network Controller

Embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI and RDMA through optional ProLiant Essentials Licensing Kits


QuickSpecs


Standard Features

Expansion Slots Slot Number Bus Speed

1

2 x8 PCI Express x8 PCI Express

Bus

Number

*

11

19

Device

Number

0

0

**

Hot Plug

no no

PCI Voltage

N/A

N/A

2 64-bit/133MHz

PCI-X (option)

16 1 no 3.3 Volt

*NOTE: Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.

**NOTE: Slots are enumerated differently based on OS. Microsoft OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).

Manageability

Integrated Lights Out 2 (iLO 2) Standard Management:

Virtual Text Remote Console

Virtual Power Button Control

Integrated Remote Console

Dedicated & full function shared network connectivity

Embedded system health

Browser, command line and scripted access

Automatic IP Configuration via DHCP/DNS/WINS

Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)

OS independent hardware health status

IML and iLO Event Logging

Support for 12 user accounts with customizable access privilege

Storage Controller


Performance Models: HP Smart Array P400i/256MB BBWC Controller (RAID 0/1/1+0/5/6)

Available upgrades: 512MB memory battery-backed write cache

(BBWC) module for RAID 0/1/1+0/5/6.

Base Models:

Entry Models:

HP Smart Array P400i/256MB Controller (RAID 0/1/1+0/5)

Available upgrades: 512MB memory battery for battery-backed write cache (BBWC) module for RAID 0/1/1+0/5/6, or battery-backed write cache for RAID 0/1/1+0/5/6.

HP Smart Array E200i/64MB Controller (RAID 0/1/1+0)

Available upgrades: 128MB memory battery for battery-backed write cache (BBWC) module for RAID 0/1/1+0/5.

Storage

Maximum Internal

Storage Type

Optical Drives

(Slimline Drive bay)

Drive Bays

Hot Plug Serial Attached

SCSI (SAS)

Hot Plug Serial ATA

(SATA)

Optional DVD-ROM, DVD/CD-RW Combo (standard in performance models), DVD-RW, or Slimline floppy drive

Up to 6 Small Form Factor bays total

NOTE: 4 bays active in most models. Smart Array P400i controller and

Mini-SAS storage cable (P/N 399546-B21) required for activation of 5th and 6th drive bays.

876GB SAS

360GB SATA

6 x 146GB SAS

6 x 60GB SATA


QuickSpecs

Standard Features

Interfaces

Keyboard

Mouse

Serial

Video

USB 2.0 Ports


1

1

1

2

1

1

4 total: 2 rear, 1 front, 1 internal

NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html

.

Network RJ-45 iLO 2 remote management port

Graphics

Form Factor

Integrated ATI ES1000 1280 x 1024 x 16M color (32MB video standard)

Rack (1U), (1.75 in/4.45 cm); 27.75 inch depth (70.5cm)

ProLiant Essentials

Foundation Pack

Software

HP Systems Insight

Manager

SmartStart

Insight Management

Agents

HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible environment to centrally manage servers, storage and other infrastructure devices across multiple operating system platforms.

Through a single management view, HP SIM provides core management services that include device discovery and identification, event views, health monitoring, inventory data collection, software version control and reporting. HP SIM is built on industry standards and is extensible with value-added ProLiant Essentials, Integrity Essentials and Storage Essentials software to meet individual management needs.

For more details on HP SIM visit http://www.hp.com/go/hpsim .

HP SIM provides organizations with the following benefits:

Simplifies and consolidates infrastructure lifecycle management using task and query based functionality

Provides the foundation for infrastructure automation and virtualization

Enables IT management based on business processes not hardware platforms

Lowers infrastructure maintenance cost and frees resources for innovation

Maximizes resource utilization with virtualization technologies

Provides a central point of integration between infrastructure and

Enterprise management tools such as HP OpenView

SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart .

SmartStart version supported (minimum): SmartStart 7.51.

Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management

Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface


QuickSpecs

Standard Features


for managing individual servers,

Subscriber's Choice

ROMPaq, support software, and configuration utilities

Insight Diagnostics

Optional ProLiant

Essentials Value Packs

Insight Management Agents and The HP System Management

Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials

Rapid Deployment Pack. For additional information about the

Management Agents and the HP System Management Homepage please visit the management Web site at http://www.hp.com/servers/manage .

Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides automatic delivery of software and driver change notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options available in SmartStart or downloadable from Software and Drivers download pages: http://www.hp.com/go/support

The most advanced configuration analysis, reporting and troubleshooting utilities used by HP and at your fingertips, available in

SmartStart.

Optional software offerings that selectively extend the functionality of an

Adaptive Infrastructure to address specific business problems and needs:

Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution for all ProLiant servers. RDP includes the

ProLiant Integration Module featuring ProLiant server preconfigured events for OS installation, and optimized software drivers, firmware and management agents. Every RDP disc includes 7-day, 10-node trial licenses for evaluation purposes.

RDP requires a license for each server deployed and is available for purchase with HP servers. For more information, visit: http://www.hp.com/servers/rdp .

Workload Management Pack – provides easier management of complex environments, improving overall server utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server.

Performance Management Pack – a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources.

Intelligent Networking Pack – detects and analyzes network bottlenecks or broken network linkages and steers traffic to the optimum route based on network conditions, plus it provides an extra layer of protection. The virus throttle feature of the solution slows the propagation of fast spreading virus

Vulnerability and Patch Management Pack – identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and other blended threats

Virtual Machine Management Pack – provides central management and control of virtual machines from Microsoft and

VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management


QuickSpecs

Standard Features


Optional Remote

Management Packs console.

Server Migration Pack – The Server Migration Pack automates the manual processes required for migrating servers between physical or virtual platforms (P2V, V2P, and V2V).

Server Migration Pack – P2P Edition: Upgrading or replacing your existing server? Effortlessly transition to new servers with automated, accurate and affordable migration of OS, application and data.

Accelerated iSCSI Pack - enables the embedded Multifunction network controller to serve as both a NIC and an iSCSI HBA providing access to SAN storage over the same connection used for networking. Processing of the protocol stack is offloaded to the NIC reducing CPU utilization and greatly improving the speed with which the requests are processed and sent to the network.

Remote Directory Memory Access (RDMA) Pack for Embedded

Multifunction Gigabit Server Adapters – provides direct and faster communication between application buffers in separate servers for tasks that involves moving large amounts of data, such as network backups, database read/write, and high performance computing.

Integrated Lights-Out Advanced Pack - upgrades the iLO 2 processor with comprehensive remote control including Virtual

KVM graphical console, virtual media, power management and enterprise security.

NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value

Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials

Value Pack product QuickSpecs for more information.

NOTE: For more information regarding ProLiant Essentials Software, please see the following

URL: http://www.hp.com/servers/proliantessential .

Industry Standard

Compliance

ACPI 1.0b Compliant

PCI 2.2 Compliant

WOL Support

Microsoft® Logo certifications

PXE Support

USB 1.1 and 2.0 Compliant

Remote Management

Integrated Lights Out 2 (iLO2) Standard Management:

Virtual Text Remote Console

Virtual Power Button Control

Integrated Remote Console

Dedicated & full function shared network connectivity

Embedded system health

Browser, command line and scripted access

Automatic IP Configuration via DHCP/DNS/WINS

Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)

OS independent hardware health status

IML and iLO Event Logging

Support for 12 user accounts with customizable access privilege


QuickSpecs


Standard Features

Intelligent

Manageability

HP Systems Insight Manager

SmartStart

ROM-Based Setup Utility (RBSU)

Remote-Flash Redundant ROM

Integrated Management Log (IML)

Server Health logging

Automatic Server Recovery-2 (ASR-2)

System Insight Display (SID)

Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)

Hot Spare Boot

NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).

Power Down Utility

Pre-Failure Warranty (covers processors, as well as SAS hard drives and memory)

Security

Power-on password

Keyboard password

Diskette drive control

Diskette boot control

QuickLock, Network Server Mode

Removable CD and Diskette Drive Assembly

Serial interface control

Administrator's password

Disk configuration lock

Integrated Lights-Out has 12 customizable user accounts and SSL encryption

Integrated Lights-Out can be disabled via a Global Setting iLO Advance Pack supports directory services integration and two-factor authentication

Server Power Cords

High voltage power cord ships standard with all part numbers.

UPS Power Cord

Matrix

Please see the UPS Power Cord Matrix for cable descriptions, requirements, and specifications for UPS units: ftp://ftp.compaq.com/pub/products/servers/proliantstorage/power-protection/powercordmatrix.pdf

.

Power Supply

700W, Optional (1+ 1 redundant) power supply

NOTE: PN 399542-B21 contains the optional power supply and an IEC power cable only; purchase if connecting to PDU/UPS that supports IEC cables.

System Fans

Required Cabling

9 fans ship standard; N+1 fan redundancy standard

For required cabling information, refer to the Web site at http://h18000.www1.hp.com/products/servers/proliantdl360/ .


QuickSpecs


Standard Features

OS Support

Microsoft Windows 2000 Server

Microsoft Windows Server 2003

Novell NetWare

Linux (Red Hat, SuSE)

Solaris 10 32/64-bit

VMware Virtualization Software

NOTE: SAS and SATA models may have different OS support. Please see OS Support Matrix.

NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix page at: http://www.hp.com/go/supportos .

NOTE: For more complete and up-to-date information on how to buy server operating systems from HP please visit the OS product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html

NOTE: For a listing of the latest drivers available for the HP ProLiant DL360, please see: http://h18023.www1.hp.com/support/files/server/us/index.html

.

NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux

Web site at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html

.

NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the

VMware Server Support Matrix at: http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html

.

Rack Airflow

Requirements

Rack 10000 series Cabinets

The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).

Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation

CD provided with the server, or to the server documentation located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/proliantdl360/index.html

.

Telco Rack Support

HP ProLiant DL360 G5 Telco Rack Kit:

Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions ( http://www.racksolutions.com/hp/ )


QuickSpecs


Standard Features

Factory Express

Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for

HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP

BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express .

HP Enterprise

Configurator

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's

Customer Business Center or an Authorized Partner for assistance.

http://www.hp.com/products/configurator

HP ProLiant Smart

Buys

The HP Smart Buy program offers mainstream business solutions at competitive prices with excellent availability and superior HP quality. It offers a wide range of industry-leading HP products at compelling prices, allowing you to receive richer configurations with additional options.

NOTE: For detailed specification information on ProLiant Smart Buys please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf

Service and Support

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of resellers and service providers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care

Pack services or customized service agreements.

NOTE: Server Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

HP services provide continuous care and support expertise with committed response designed to meet your IT and business needs.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Enhanced Care – Minimum recommended service support offer designed to ensure customers


QuickSpecs

Standard Features


have access to expert assistance, whenever they need it.

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years

Continuance Care – Recommended service delivering cost-effective support options designed to extend HP Services committed response and guaranteed fix times, designed to speed problem identification and resolution.

6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years

Total Care – Highest HP Support service level recommend to help increase IT performance and availability with comprehensive, integrated hardware and software services

Support Plus 24 – Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays

Deployment Services – HP Installation and Start Up services designed to take time, risk, and worry out of the deployment of ProLiant servers – and free customers IT support staff to focus on what they do best, their business.

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer

Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.

HP holidays

NOTE: For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices http://www.hp.com/go/proliant/carepack


QuickSpecs

Models


NOTE: For detailed specification information on ProLiant Smart Buys please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf

.

Models

HP DL360 G5

Performance Models

Dual-Core Models

DL360R05 5160 2GB

416566-001

DL360R05 5150 2GB

416564-001

Processor(s)

Two of the following depending on Model

Cache Memory

Memory



(2) Dual-Core Intel Xeon 5160 Processor (3.00 GHz, 80 Watts, 1333

FSB)


FSB)

4MB (1 x 4MB) Level 2 cache - Intel Xeon Processor 5100 Sequence

2 GB (2 x 1 GB) Standard; PC2-5300 Fully Buffered DIMMs (DDR2-

667)

Embedded NC373i Multifunction Gigabit Server Adapters

Hard Drive

HP Smart Array P400i/256MB BBWC Controller (RAID 0/1/1+0/5/6)

512MB BBWC optional upgrade

No drives included; (6) drive bays active

Internal Storage

Optical Drive

PCI-Express Slots

Power Supplies

876GB SAS; 360GB SATA

Slimline DVD/CD-RW Combo drive

1 full-length x8 PCI-Express slot

1 low-profile x8 PCI-Express slot

(2) 700W power supplies, redundant

Fans

Form Factor

9 total, redundancy standard


HP DL360 G5 Base

Models

Quad-Core Models

DL360R05 E5320 1GB

438313-001

Dual-Core Models

DL360R05 5160 1GB

416565-001

DL360R05 5150 1GB

416563-001

DL360R05 5140 1GB

416562-001

DL360R05 5060 1GB

399519-001

Processor(s)


Cache Memory


Memory



Hard Drive


Optical Drive


Power Supply

(1) Quad-Core Intel Xeon E5320 Processor (1.86 GHz, 80 Watts, 1066

FSB)


FSB)


FSB)


FSB)


FSB)




1 GB (2 x 512 MB) Standard; PC2-5300 Fully Buffered DIMMs (DDR2-

667)


HP Smart Array P400i/256MB Controller (RAID 0/1/1+0/5) 512MB

BBWC or BBWC optional upgrades

No drives included; (4) drive bays active.

(6) bays supported with optional storage cable

(PN 399546-B21)


Optional DVD, DVD/CD-RW, or Floppy



(1) 700W power supply, redundant optional


QuickSpecs

Models

Fans

Form Factor


9 total, redundancy standard


HP DL360 G5 Entry

Models

Quad-Core Models

DL360R05 E5310 1GB

438312-001

DL360R05 5130 1GB

416561-001

DL360R05 5120 1GB

416560-001

DL360R05 5110 1GB

416559-001

Processor(s)


Cache Memory

Memory



Hard Drives


Optical Drive


Power Supply

Fans

Form Factor

(1) Quad-Core Intel Xeon Processor E5310 (1.60 GHz 80 Watts, 1066

FSB)


FSB)


FSB)


FSB)

8MB (2x4MB) Level 2 cache- Intel Xeon Processor 5300 Sequence


1 GB (2 x 512 MB) Standard; PC2-5300 Fully Buffered DIMMs (DDR2-

667)


HP Smart Array E200i/64MB Controller (RAID 0/1/1+0), 256MB BBWC optional upgrade

No drives included; (4) drive bays active


Optional DVD, DVD/CD-RW, or Floppy




9 total, N+1 redundancy standard



QuickSpecs

Configuration Information - Factory Integrated Models


NOTE: HP does not allow factory integration of options into standard models listed above.

Configure-to-order servers must start with a CTO Chassis.

NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.

NOTE: FIO indicates that this option only available as a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)

Models

HP ProLiant DL360 G5 Rack CTO Chassis

Factory Integrated Model ships with:

399524-B21

Embedded NC373i Multifunction Gigabit Server Adapter

Integrated Lights-Out 2 (iLO 2) embedded

1 full-length and 1 low-profile x8 PCI-Express slots

9 fans; N+1 fan redundancy


Rack (1U), (1.75 in/4.45 cm)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Processors

Quad-Core Intel Xeon Processor E5320 – 1.86GHz, 80 Watts, 1066 FSB

Quad-Core Intel Xeon Processor E5310 – 1.60GHz, 80 Watts, 1066 FSB

435950-L21

438314-L21

Base Memory

Storage Controllers

Dual-Core Intel Xeon Processor 5160 – 3.00 GHz, 80 Watts, 1333 FSB










1 GB FBD PC2-5300 2 x 512 MB Kit

2 GB FBD PC2-5300 2 x 1 GB Kit



Smart Array E200i controller for DL360 G5

NOTE: If selected, must choose one of the two cache modules below.

HP Smart Array E200 64MB FIO Cache

NOTE: Supports Smart Array E200 Controller only.

128MB Battery Backed Write Cache Enabler Option Kit

NOTE: Supports Smart Array E200i Controller.

Smart Array P400i controller for DL360 G5

NOTE: If selected, must choose one of the two cache modules below.

HP Smart Array P400 256MB Cache FIO

NOTE: Supports Smart Array P400 Controller and Smart Array P400i Controller only.

512MB Battery-backed cache upgrade

NOTE: Supports Smart Array P400 Controller and Smart Array P400i Controller only.

Battery-backed write cache upgrade (battery only)

NOTE: For Smart Array P400 Controller and Smart Array P400i Controller only.

416579-L21

416577-L21

416575-L21

416573-L21

416571-L21

416569-L21

416567-L21

399540-L21

399536-L21

399532-L21

397409-B21

397411-B21

397413-B21

397415-B21

399548-B21

405102-B21

346914-B21

413741-B21

405139-B21

405148-B21

383280-B21


QuickSpecs


Configuration Information - Factory Integrated Models

HP Smart Array P600/256 BBWC Controller

NOTE: Requires PCI-X Riser option (PN 405154-B21).

NOTE: Requires HP SAS 4i to Mini SAS 4i 31 inch/.79 meter cable (PN 411100-

B21).

337972-B21

Step 3: Choose Additional Factory Integratable Options

Performance Packs

The HP ProLiant DL360 G5 performance packs are necessary to configure a HP

ProLiant DL360 G5 Performance Model. HP ProLiant DL360 G5 Performance model includes the latest performance technologies and enterprise class availability features pre-installed for convenience and value. The performance pack includes a 2nd processor, redundant power supplies, Smart Array P400i

Controller with 256MB of BBWC, and storage cable to enable the all 6 disk drive bays.

NOTE: 331903-B21 Slimline CD-RW/DVD-ROM Combo Drive Option Kit should also be selected along with the Performance Pack skus below to achieve parity to the HP ProLiant DL360 G5 Performance Models.

HP DL360G5 X5160 HPM FIO Perf Pack

HP DL360G5 X5150 HPM FIO Perf Pack

430107-B21

431883-B21

Step 4: Choose Additional Options for Factory Integration

NOTE: For additional options, please refer to the "Options" section below.


QuickSpecs

Options


NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information.

HP ProLiant DL360

G5 Unique Options

Quad-Core Intel Xeon Processor E5320 (1.86 GHz, 80 Watts, 1066 FSB)


435950-B21

438314-B21





416579-B21

416577-B21

416575-B21

416573-B21







PCI-X Riser option

NOTE: To convert full-length PCI-Express slot to PCI-X slot.

Ambidextrous cable management arm

NOTE: Package contains two cable management arms

Fixed Cord Extension Bars for 1U servers (2 PDU sticks per kit)

700W HP redundant power supply with IEC cord only

416571-B21

416569-B21

416567-B21

399540-B21

399536-B21

399532-B21

405154-B21

365403-B21

351655-B21

399542-B21

ProLiant Essentials

Value Pack Software

ProLiant Essentials Accelerated iSCSI Pack

ProLiant Essentials Accelerated iSCSI Pack, Single License

NOTE: For additional Accelerated iSCSI Pack License Kits, please see the

QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12466_na/12466_na.HTML

ProLiant Essentials Intelligent Networking Pack

ProLiant Essentials Intelligent Networking Pack – Windows Edition, Single

Server License

NOTE: For use with a single server. Contains one license with a unique license activation key and documentation.

NOTE: For additional ProLiant Intelligent Networking Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12062_na/12062_na.HTML

ProLiant Essentials Intelligent Networking Pack – Linux Edition, Single Server

License

NOTE: For additional ProLiant Intelligent Networking Pack – Linux License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12327_na/12327_na.HTML

ProLiant Essentials Performance Management Pack

ProLiant Essentials Performance Management Pack, Single-Server License

NOTE: For use with a single server. Contains one license with a unique license activation key, HP Management CD and documentation.

NOTE: The most recent version of the software can always be downloaded at http://www.hp.com/products/pmp .

NOTE: For additional ProLiant Performance Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11925_na/11925_na.HTML

HP ProLiant Essentials Remote Directory Memory Access (RDMA) Pack

407484-B22

436225-B21

436229-B21

306696-B21


QuickSpecs

Options


HP ProLiant Essentials RDMA Pack for Embedded Multifunction Gigabit Server

Adapters, 1 License

HP ProLiant Essentials RDMA Pack for Standup Multifunction Gigabit Server

Adapters, 1 License

NOTE: For additional ProLiant Essentials RDM Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12573_na/12573_na.HTML

ProLiant Essentials Rapid Deployment Pack

Rapid Deployment Pack, Single-Server License

NOTE: This license allows 1 server to be deployed and managed via RDP.

NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.HTML

ProLiant Essentials Workload Management Pack

ProLiant Essentials Workload Management Pack, Single Server License

NOTE: For additional ProLiant Workload Management Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11452_na/11452_na.HTML

ProLiant Essentials Virtualization Management Software

ProLiant Essentials Virtual Machine Management Pack, Single-Server License


ProLiant Essentials Server Migration Pack, Single-Migration License

NOTE: Contains one license, enabling 1 server migration, with a unique license activation key and documentation.

NOTE: For additional ProLiant Essentials Virtualization Management Software

License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12328_na/12328_na.HTML

NOTE: This license allows 1 server to be migrated from a physical server to a virtual machine. Or this license can be used to migrate a virtual machine from one virtualization layer i.e. VMware GSX to a different virtualization layer such as VMware ESX or Microsoft Virtual Server 2005.

ProLiant Essentials Physical to ProLiant Edition

ProLiant Essentials Server Migration Pack - Physical to ProLiant Edition, Single-

Migration License

NOTE: For additional ProLiant Essentials Server Migration License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12467_na/12467_na.HTML

ProLiant Essentials Vulnerability and Patch Management Pack

ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server

License


NOTE: For additional ProLiant Vulnerability and Patch Management Pack

License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12111_na/12111_na.HTML

NOTE: Flexible and volume quantity license kits are available for ProLiant

Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information.

NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials .

407478-B22

407481-B22

267196-B21

303284-B21

435661-B21

435663-B21

412978-B21

371645-B21


QuickSpecs

Options


Remote Management Integrated Lights-Out Advanced Pack

ProLiant Essentials Integrated Lights-Out Advanced Pack, 1 server

Featuring: Sophisticated virtual administration features for ultimate control of servers in the data centers and remote sites.

NOTE: For additional Integrated Light-Out Advanced Pack License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11052_na/11052_na.HTML

263825-B21

ProLiant Software

Maintenance

Subscription

ProLiant Software Maintenance Subscription

ProLiant Software Maintenance Single Release

ProLiant Foundation Pack Single Release

NOTE: Please see the SmartStart QuickSpecs for additional information regarding the subscription purchase: http://h18000.www1.hp.com/products/quickspecs/North America/11073.html

355060-B21

356573-B21

356604-B21

Processor

Memory (DIMMs)

















435950-B21

438314-B21

416579-B21

416577-B21

416575-B21

416573-B21

416571-B21

416569-B21

416567-B21

399540-B21

399536-B21

399532-B21

397409-B21

397411-B21

397413-B21

397415-B21

Optical Drives

Diskette Drive

Slimline CD-RW/DVD-ROM Combo Option Kit

Slimline DVD-ROM Drive (8X/24X) Option Kit

HP DVD+R/RW 8X Slim

Slimline CD-ROM Drive 24X

Slimline Ejectable Floppy drive

331903-B21

264007-B21

383975-B21

356963-B21

390164-B21


QuickSpecs

Options

Hard Drives


Serial Attached SCSI (SAS) SFF Hot Plug

HP 36GB 3G SAS 10K SFF SP HDD



NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.HTML

SFF SATA Hot Plug

HP 60GB 1.5G SATA 5.4K SFF HDD

NOTE: SATA drives have a 1 year warranty. Please see the SATA Hard Drive

QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/12091_na/12091_na.HTML

375859-B21

375861-B21

431958-B21

379306-B21

Storage Controllers SAS Controllers

Smart Array E200i Controller

128-MB Battery-Backed Write Cache (BBWC)

NOTE: Supports Smart Array E200i Controller only.

Smart Array P400i Controller

HP Smart Array P400i/256MB Controller

Battery-backed write cache upgrade


512MB Battery-backed cache upgrade


Smart Array P600 Controller


NOTE: Requires DL360 G5 PCI-X conversion kit (PN 405154-B21).

512 MB Battery-Backed Cache Upgrade

NOTE: This 512-MB Battery-Backed Cache Module upgrade kit supports the

Smart Array P600 Controller and the Smart Array 6400 series Controller.

Smart Array P800 Controller


NOTE: Please see the following Controller QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12460_na/12460_na.HTML

(Smart Array E200 Controller) http://h18000.www1.hp.com/products/quickspecs/12400_na/12400_na.HTML

(Smart Array P400 Controller) http://h18000.www1.hp.com/products/quickspecs/12247_na/12247_na.HTML

(Smart Array P600 Controller) http://h18000.www1.hp.com/products/quickspecs/12616_na/12616_na.HTML

(Smart Array P800 Controller)

SAS HBA

HP 8 Internal Port SAS HBA with RAID

NOTE: Supports SAS and SATA disk drive. RAID 0,1 supported.

NOTE: Please see the HBA QuickSpecs for additional information: http://h18004.www1.hp.com/products/quickspecs/12332_na/12332_na.html

(8 Internal Port SAS HBA)

SAS Cables

346914-B21

399550-B21

383280-B21

405148-B21

337972-B21

372538-B21

381513-B21

347786-B21


QuickSpecs

Options


HP Mini SAS 4i 13.4 inch/0.35 m cable

NOTE: Used to connect Smart Array P400i to DL360 G5 5th and 6th drive bays.

HP SAS 4i to Mini SAS 4i 31 inch/.79 meter cable

NOTE: Used to connect SA-P600, SA-P400, SA-E200 Controllers to the HP

ProLiant DL360 G5 drive backplane. This kit supports all six drive bays.

SCSI Controllers for External Drive/Storage Support

Smart Array 6402/128 Controller

NOTE: For support of external drives only.



Smart Array 642 Controller


128MB Battery-Backed Cache Enabler

NOTE: This 128MB BBWC supports the Smart Array 642 Controller.

512 MB Battery-Backed Cache Upgrade

NOTE: This 512-MB Battery-Backed Cache Module upgrade kit supports the

Smart Array P600 Controller and the Smart Array 6400 series Controller.

64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2

SCSI HBA

HP SC11Xe Host Bus Adapter

NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.HTML

(SCSI Adapter) http://h18000.www1.hp.com/products/quickspecs/11555_na/11555_na.HTML

(U320 Adapter) http://h18000.www.1.hp.com/products/quickspecs/11943_na/11943_na.HTML

(U320 SCSI HBA) http://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.HTML

(SC11XE HBA)

399546-B21

411100-B21

273915-B21

273914-B21

291967-B21

351580-B21

372538-B21

374654-B21

412911-B21

Communications

HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter

HP NC310F PCI-X 1000SX Gigabit Server Adapter

HP NC320T PCI Express 1000T Gigabit Server Adapter

HP NC340T PCI-X 4-port 1000T Gigabit Server Adapter

HP NC360T PCI Express Dual Port Gigabit Server Adapter

HP NC373F PCI Express Multifunction Gigabit Server Adapter

HP NC373T PCI Express Multifunction Gigabit Server Adapter

HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter

HP NC510F PCIe 10 Gigabit Server Adapter

NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each

NC510F adapter.

HP NC510C PCIe 10 Gigabit Server Adapter

NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each

NC510C adapter.

HP NC1020 PCI 1000T Gigabit Server Adapter

NOTE: Any NIC (except the NC1020) on the option list can be used for redundancy with the embedded Dual NC373i Multifunction Gigabit NICs. When teaming with other NICs or with the embedded NIC, the lack of Jumbo Frames and LSO features on the NC1020 will cause high end NICs to have those features disabled.

HP IB 4X SDR PCI-e single PORT HCA

367132-B21

368169-B21

367047-B21

391661-B21

412648-B21

394793-B21

394791-B21

394795-B21

414126-B21

414129-B21

353377-B21

431038-B21


QuickSpecs

Options

HP IB 4X DDR PCI-e Single PORT HCA


High Performance

Solutions

HPCC Myrinet Fiber NIC

Tape Drives

NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html

For recommended tape drive offerings for this ProLiant server see the following:

USB Tape Drives

HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite)

NOTE: HP recommends combining this tape drive with the 1U USB Rack-Mount kit (A8007A) for a complete rack-mount solution.

HP StorageWorks 1U USB Rack-Mount Kit with one DAT 72 USB Tape Drive

SAS Tape Drives

NOTE: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied with tape drive) deactivates 1 of the hard drive bays.

Actual hard drive bay deactivated depends on where split cable plugs into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard drive cage would mean drive bay 8 is deactivated.

HP StorageWorks Ultrium 448 SAS Internal Tape Drive

NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A) for a complete rack-mount solution.

HP StorageWorks Ultrium 920 SAS Internal Tape Drive

NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A) for a complete rack-mount solution.

NOTE: Please refer to the "Tape Drives, Tape Autoloaders & Tape Libraries" table in the Storage section of this document for a list of SAS controllers with tape support.

Ultrium Tape Drives

HP StorageWorks Ultrium 232 Internal Tape Drive (Carbonite)

NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-

Mount kit (A7445B) for a complete rack-mount solution.

HP StorageWorks 1U Rack-mount kit with one Ultrium 448 (Carbonite)

HP StorageWorks 1U SCSI Rack-mount kit with one Ultrium 920

NOTE: Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional options such as controllers, media, and other related items: http://h18006.www1.hp.com/products/quickspecs/11739_na/11739_na.html

http://h18006.www1.hp.com/products/quickspecs/12128_na/12128_na.html

For an up-to-date listing of the latest O/S and software support details for HP

Ultrium tape drives, please visit: http://www.hp.com/go/connect

DAT Drives

HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon)

NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-

Mount kit (A7445B) for a complete rack-mount solution.

NOTE: Please see the DAT Tape Drive QuickSpecs for controllers, media, and other options: http://h18000.www1.hp.com/products/quickspecs/11883_na/11883_na.HTML

For an up-to-date listing of the latest O/S and software support details for HP

DAT drives, please visit: http://www.hp.com/go/connect

Rack-Mount Tape Drive Enclosures

DA - 12476 U.S. QuickSpecs — Version 15 — 12/21/2006

431039-B21

257894-006

DW022A

AG594A

DW085A

EH847A

DW064A

DW028B

EH903A

Q1523B

Page 21

QuickSpecs

Options


HP StorageWorks 1U SCSI Rack-Mount kit

NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232,

Ultrium 448 and Ultrium 920 tape drives.

HP StorageWorks 1U USB Rack-Mount Kit

NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the DAT 24 USB, DAT 40 USB and DAT 72 USB tape drives.

HP StorageWorks 1U SAS Rack-Mount Kit

NOTE: The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the Ultrium 448 SAS tape drive.

NOTE: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied with tape drive) deactivates 1 of the hard drive bays.

Actual hard drive bay deactivated depends on where split cable plugs into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard drive cage would mean drive bay 8 is deactivated.

NOTE: Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information regarding these kits: http://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.HTML

A7445B

A8007A

AE459A

Tape Autoloaders HP StorageWorks DAT Autoloader

HP StorageWorks DAT 72x10 tape autoloader

HP StorageWorks 1/8 Tape Autoloader

HP StorageWorks 1/8 Ultrium 960 Tape Autoloader

HP StorageWorks 1/8 Ultrium 920 G2 Tape Autoloader



HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit

NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount instructions

1/8 Tape Autoloader Rackmount Kit

NOTE: Required to install the 1/8 tape autoloader in a standard 19-inch rack.

NOTE: Please reference the Autoloader QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs .

AE313A

AF204A

AH165A

AH164A

AH163A

AH166A

C9268R


QuickSpecs

Options

Tape Libraries


HP StorageWorks MSL2024 Tape Library

HP StorageWorks MSL2024 1 Ultrium 960 Drive Library

HP StorageWorks MSL2024 1 Ultrium 960 4GB FC Library















Ultrium 960 technology

HP StorageWorks MSL6030 1 Ultrium 960 Dr LVDS Library

HP StorageWorks MSL6030 1 Ultrium 960 Dr FC Library



Ultrium 460 technology





NOTE: Please reference the MSL2024, MSL4048 and MSL6000 Tape Library

QuickSpecs at http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at http://www.hp.com/go/ebs .

AG323A

AG325B

AD606B

AD608B

AD607B

AD609B

AD598B

AD600B

AD599B

AD601B

AG115A

AG326B

AH169A

AH170A

AG116A

AG117A

AG320A

AG321A

AH171A

AH172A

AG322A

AG324B

HP Data Protector

Express Software

HP DP Express Backup Server Upgrade for ProLiant Software

HP DP Express Package for Microsoft Small Business Server

NOTE: To obtain a free licensed copy of HP Data Protector Express for ProLiant edition software, please visit the "Protect Your Data" link accessible from your

ProLiant server's System Management Homepage (SMH) software (SmartStart

7.5 or later).

NOTE: Please see the HP Data Protector Express QuickSpecs for additional information regarding the purchase of HP Data Protector Express software: http://h18000.www1.hp.com/products/quickspecs/12337_na/12337_na.html

BB117AP

BB118AA


QuickSpecs


Options

HP StorageWorks

Modular Smart Array

20

HP StorageWorks Modular Smart Array 20

NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.

HP StorageWorks Modular Smart Array 20 Starter Kit

NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies. Includes Smart Array 6402/128 Controller.

NOTE: The Modular Smart Array Enclosure 20 Family supports the SATA

1.5Gb/s 3.5” Hot Plug Hard Drives.

335921-B21

366172-B21

HP StorageWorks


30

HP StorageWorks Modular Smart Array 30 SB

NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies

HP StorageWorks Modular Smart Array 30 DB

NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant power supplies

NOTE: The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3,

Ultra320 Hot Plug Hard Drives.

302969-B21

302970-B21

364430-B21

HP StorageWorks


50

HP StorageWorks Modular Smart Array 50 Enclosure

NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/12245_na/12245_na.HTML

HP StorageWorks


500

HP StorageWorks Modular Smart Array 500 Generation 2

NOTE: Please see the Modular Smart Array 500 Generation 2 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11956_na/11956_na.HTML

335880-B21

HP StorageWorks


1000

HP StorageWorks Modular Smart Array 1000

NOTE: Please see the Modular Smart Array 1000 QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML

HP StorageWorks


1500 cs

Modular Smart Array 1500 Controller Shelf

NOTE: Please see the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options and configuration information at: http://www.hp.com/go/MSA1500cs

201723-B22

AA986A


QuickSpecs

Options

Cluster Options


ProLiant Cluster Starter Kit

NOTE: For additional information regarding the ProLiant Cluster Starter Kit please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11935_na/11935_na.html

HP HA/F200 for Entry SAN Cluster

NOTE: For additional information regarding the ProLiant Cluster for Entry Level

SAN please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11932_na/11932_na.html

NOTE: For configuration/certification options for the HP Parallel Database

Cluster for Oracle RAC please go to: http://www.hp.com/solutions/highavailability/oracle

HP Serviceguard for Linux ProLiant Cluster A.11.16 for SUSE SLES 9 & 10 and

Red Hat EL 3 & 4 (2 node license cluster kit)

HP Serviceguard for Linux A.11.16 for SUSE SLES 9 & 10 and Red Hat EL 3 &

4 (single license version)

364023-B22

364026-B22

305199-B26

307754-B26

HP Serviceguard for Linux and Red Hat Global File System - 1 year subscription T2798AA#001

HP Serviceguard for Linux and Red Hat Global File System - 3 years subscription

T2798AA#003

NOTE: For additional information regarding HP Serviceguard for Linux, please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html

NOTE: For configuration/certification options for HP Serviceguard for Linux please go to: http://www.hp.com/info/sglx

StorageWorks

Options

NOTE: The following is a list of all Fibre Channel Host Bus Adapters for

Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html

HP StorageWorks FC2142SR 4Gb PCI-e HBA

HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA

HP StorageWorks FC1142SR 4Gb PCI-e HBA

HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA

HP StorageWorks FC2143 4Gb PCI-X 2.0 -to-Fibre Channel HBA

HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA

HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA

HP StorageWorks FC1243 Dual Channel 4Gb PCI-X 2.0 HBA

Uninterruptible Power

Systems – Rack

Mountable

HP, R1.5kVA UPS, 1U

HP R3000 VA UPS, 2U, L5-30

HP R3000 VA UPS, 2U, L6-20

HP R5500 VA UPS

Power Cords

NOTE: The HP ProLiant DL360 G5 ships with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs).

Nema 5-15P to IEC320-C13

A8002A

A8003A

AE311A

AE312A

AD167A

AD168A

AB429A

AE369A

AF419A

AF422A

AF423A

AF426A

AF556A


QuickSpecs


Options

HP Monitored Power

Distribution Unit (PDU)

HP Monitored Power Distribution Unit: Full Rack Version

17.3 kVA Monitored PDU Model S2324




22 kVA Monitored PDU Model S2316

11 kVA Monitored PDU Model S1316



4.9kVA Monitored PDU model S124

7.3kVA Monitored PDU model S132

AF503A

AF504A

AF505A

AF506A

AF507A

AF508A

AF509A

AF510A

AF914A

AF915A

Modular PDUs 1U/0U

(Up to 32 outlets)

NOTE: 1U/0U mounting brackets shipped with the unit (optimized for

10000 and 9000 series racks).

Fixed Cord Extension Bars

NOTE: Two extension bar sticks; each with (7) C13 plugs.

Fixed Cord PDU

NOTE: Four Fixed Cord Extension Bars, and one 24A, HV mPDU L6-30P core.

HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127

VAC)

NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS R3000 XR.

HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240

VAC)

HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240

VAC)

NOTE: This mPDU (252663-B21), 40A model has a hardwired input.

HP Modular Power Distribution Unit(mPDU), High Volt Model, 16A (200-240

VAC)

HP Modular Power Distribution Unit (mPDU), High Volt Model, 40A, Attached

Cord

NOTE: This PDU has a detachable input power cord. This model may also be used with the high volt UPSs R3000 XR and R6000, need to order cable PN

340653-001.

NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U

Modular PDUs) QuickSpecs for additional options including shorter jumper cables: http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.HTML

USB Options

HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)

USB 1.44-MB External Diskette Drive (Carbonite)

HP USB 04 Standard Keyboard

USB 2.0 4-port HUB

HP 1GB Drive Key II – USB 2.0 Flash Drive

HP 512MB DriveKey II – USB Flash Drive

351655-B21

351655-D72

252663-D71

252663-D72

252663-B21

252663-B24

252663-D73

DC172B

DC141B

DT528A#xxx

DG954A

AG382AA

ED516AA

399542-B21

HP ProLiant DL360

G5 Deployment

Options

700W HP redundant power supply with IEC cord only


QuickSpecs

Options

HP Rack 5000 Series

(Graphite Metallic)


HP 5642 Rack Unassembled

NOTE: Please see the HP Rack 5642 QuickSpecs for additional part numbers and Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/12074_na/12074_na.HTML

NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower .

358254-B21

HP Rack 10000 G2

Series

(Carbon/Graphite

Metallic)

10642 G2 (42U) Rack Cabinet - Pallet

10642 G2 (42U) Rack Cabinet - Shock Pallet

10642 G2 (42U) Rack Cabinet - Crated

10642 G2 (42U) Rack Cabinet, with Extension - Shock Pallet

10636 G2 (36U) Rack Cabinet - Pallet

10636 G2 (36U) Rack Cabinet - Shock Pallet

10636 G2 (36U) Rack Cabinet - Crated

10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet

NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed.

NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.HTML


AF001A

AF002A

AF003A

AF004A

AF011A

AF012A

AF013A

AF014A

HP Rack 10000 Series

(Graphite Metallic)

10642 (42U) Infrastructure Rack (Low Voltage)

10642 (42U) Infrastructure Rack (High Voltage)

HP Rack S10614 (14U) Rack Cabinet – Shock Pallet

HP Rack 10842 (42U, 800mm wide) – Pallet

HP Rack 10842 (42U, 800mm wide) – Shock Pallet

HP Rack 10647 (47U) – Pallet

HP Rack 10647 (47U) – Crated

HP Rack 10622 (22U) – Pallet

HP Rack 10622 (22U) – Shock Pallet

HP Rack 10622 (22U) – Crated

NOTE: xxxxxx-B21 (pallet) used to ship empty racks shipped on a truck.

xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels). xxxxxx-B23 (crated) used for air shipments of empty racks.

NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment installed. Not all HP equipment is qualified to be shipped in the Rack

10000 series

NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML

NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower

379006-001

379005-001

292302-B22

257415-B21

257415-B22

245160-B21

245160-B23

245163-B21

245163-B22

245163-B23


QuickSpecs

Options

Keyboards and

Monitors


TFT7210R Rack Mounted 17" Monitor

NOTE: For a complete list of Monitors please view the following URL: http://www.hp.com/go/kvm .

TFT7600 Rackmount Keyboard Monitor

1U Rackmount Keyboard with USB


348373-B21

AG052A

AG072A

HP KVM Switch

Options

HP Serial Console

Server Options

2x1x16 IP Console Switch with Virtual Media

4x1x16 IP Console Switch with Virtual Media

2x16 Server Console Switch with Virtual Media

PS/2 Virtual Media Interface Adapter, 1 pack

NOTE: Requires PS/2 and one USB port on server.

Server Console Switch (KVM), 0 x 1 x 8 port

Server Console Switch (KVM), 0 x 2 x 16 port

PS/2 Interface Adapter, 1 pack

PS/2 Interface Adapter, 8 pack

USB Interface Adapter, 1 pack

Serial Interface adapter - 1 Pack with power supply

NOTE: Cat5e cables are required to connect Interface Adapters to Console

Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm .

HP 1x 4 USB/PS2 KVM Switch, TT

HP 1x 4 USB/PS2 KVM Switch, RM

HP PS2 KVM Cable with audio, 6', 2-pack

HP USB KVM Cable with audio, 6', 2-pack

NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm .

AF601A

AF602A

AF600A

AF604A

336044-B21

336045-B21

262588-B21

262587-B21

336047-B21

373035-B21

371301-D71

371302-B21

371730-B21

371729-B21

HP 16 Port Serial Console Server

HP 48 Port Serial Console Server

Serial Adapter, RJ45-DB9 DCE Female, 1 Pack

Serial Adapter, RJ45-DB9 DCE Female, 8 Pack

NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console

Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm .

NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm .

AF101A

AF102A

AF103A

AF110A


QuickSpecs


Options

Service and Support

Offerings (HP Care

Pack Services)

Hardware Services 4-Hour On-site Service

4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic

Hardware Services 6-Hour Call to Repair On-site Service

6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,

Electronic

Hardware Services Next Business Day On-Site Service

Hardware Installation, Electronic

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the

Customer Description and/or Data Sheet. To be delivered on a scheduled basis

8am-5pm, M-F, excl. HP holidays, Electronic

Support Plus

Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl.

HP holidays, Electronic

Support Plus 24

Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,

Electronic

Onsite HW support 24x7, 4hr response and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,

Electronic

Onsite HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,

Electronic

NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack .

U4496E

U4497E

U4498E

U4506E

U4507E

U4508E

U4509E

U6310E

U8332E


QuickSpecs

Memory


NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

NOTE: Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at 667 MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will run at 533 MHz.

HP ProLiant DL360 G5 Entry and Base Models

Standard Memory

1 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) installed (2 x 512 MB)

Upgrading Memory and Memory Interleaving

When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B, DIMMs 5C and 6C, and DIMMs 7D and 8D must match and must be installed as a pair. When DIMMs 1A and 2A are populated the system is automatically configured for 2:1 interleaving. When all 4 banks are populated the system is automatically configured for 4:1 interleaving. When four, six, or eight DIMMs are populated with identical DIMMs the system is automatically configured for bank interleaving.

Standard Memory Plus Optional Memory

Up to 25 GB memory is available with the standard memory of 1 GB and the optional installation of PC2-5300 Fully Buffered

DIMMs (DDR2-667) memory kits.

Standard Memory Replaced with Optional Memory

Up to 32 GB of memory is available with the removal of the standard 512 MB of memory and the optional installation of

PC2-5300 Fully Buffered DIMMs (DDR2-667) memory kits.

NOTE: 4 GB Fully Buffered DIMMs kits will be available shortly following server availability to allow a maximum of 32 GB.

Today's maximum is 16 GB utilizing 2 GB DIMMs.

NOTE: Chart does not represent all possible configurations.

Memory Slot

1 2 3 4 5 6 7 8

Standard

Optional

Maximum

1 GB

25 GB

32 GB

512 MB

512 MB

4 GB

512 MB

512 MB

4 GB

Empty

4 GB

4 GB

Empty

4 GB

4 GB

Empty

4 GB

4 GB

Empty

4 GB

4 GB

Empty

4 GB

4 GB

Empty

4 GB

4 GB

NOTE: In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory. If only banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare bank,

If banks A, B, C and D are populated, bank D is the spare bank, Online spare memory is configured through RBSU.

NOTE: Mirrored Memory uses mirrored banks to provide a high level of memory redundancy. Customer chooses to implement or not: User selectable via BIOS and default is off.

Following are memory options available from HP:





397409-B21

397411-B21

397413-B21

397415-B21


QuickSpecs


Memory

HP ProLiant DL360 G5 Performance Models

Standard Memory

2 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (2 x 1 GB)

Upgrading Memory and Memory Interleaving

When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B, DIMMs 5C and 6C, and DIMMs 7D and 8D must match and must be installed as a pair. When DIMMs 1A and 2A are populated the system is automatically configured for 2:1 interleaving. When all 4 banks are populated the system is automatically configured for 4:1 interleaving. When four, six, or eight DIMMs are populated with identical DIMMs the system is automatically configured for bank interleaving.

Standard Memory Plus Optional Memory

Up to 14 GB memory is available with the standard memory of 2 GB and the optional installation PC2-5300 Fully Buffered

DIMMs (DDR2-667) memory kits.

Standard Memory Replaced with Optional Memory

Up to 32 GB of memory is available with the removal of the standard 1 GB of memory and the optional installation of PC2-

5300 Fully Buffered DIMMs (DDR2-667) memory kits.

NOTE: Chart does not represent all possible configurations.

Memory Slot

1 2 3 4 5 6 7 8

Standard

Optional

Maximum

2 GB

14 GB

32 GB

1 GB

1 GB

4 GB

1 GB

1 GB

4 GB

Empty

2 GB

4 GB

Empty

2 GB

4 GB

Empty

2 GB

4 GB

Empty

2 GB

4 GB

Empty

2 GB

4 GB

Empty

2 GB

4 GB

NOTE: In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory. If only banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare bank,

Online spare memory is configured through RBSU.

NOTE: Mirrored Memory uses mirrored banks to provide a high level of memory redundancy. Customer chooses to implement or not: User selectable via BIOS and default is off.

Following are memory options available from HP:





397409-B21

397411-B21

397413-B21

397415-B21

Online spare FBDIMM configuration requirements (in addition to general configuration requirements):

When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.

If banks A and C are being used, they must be fully populated.

If installed, bank A and bank C must contain FBDIMMs with identical part numbers.

If installed, bank B and bank D must also contain FBDIMMs with identical part numbers.

In online spare mode, FBDIMMs must be populated as specified in the following table:

Configuration Branch 0

Bank A

1A and 3A

Branch 0

Bank C

2C and 4C

Branch 1

Bank B

5B and 7B

1 *

2

X

X X

-

-

3 X X X

*NOTE: Configuration 1 is only supported if using bank A, populated with dual-rank FBDIMMs.

Branch 1

Bank D

6D and 8D

X

-

-


QuickSpecs


Memory

Mirrored memory FBDIMMs configuration requirements (in addition to general configuration requirements):

Banks A and B must be fully populated.

Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also contain FBDIMMs with identical part numbers.

When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:

Configuration

1

2

Bank A

1A and 3A

X

X

Bank B

5B and 7B

X

X

Bank C

2C and 4C

X

-

Bank D

6D and 8D

X

-


QuickSpecs

Storage


1-6

A

6 x SFF SAS Hot Pluggable Hard Drive

Bays

Slimline Bay: Optional optical or floppy drive

Drive Support

Removable Media

Slimline 1.44-MB

Diskette Drive

Slimline 24x IDE CD-

ROM Drive

Slimline DVD-ROM

Drive (8x/24x) Option Kit

(Servers)

Slimline DVD/CD-RW

Combo Option Kit

Slimline DVD-RW Drive

(8X) Option Kit

Quantity

Supported

Up to 1

Up to 1

Up to 1

Up to 1

Up to 1

Position

Supported Controller

A Integrated

A

A

Integrated IDE

Integrated IDE

A

A

Integrated IDE

Integrated IDE

Hard Drives

SAS Hard Drive

Quantity

Supported

Position


146GB 3G SAS 10K SP

72GB 3G SAS 10K SP

36GB 3G SAS 10K SP

6 1-6 HP Smart Array E200i/64MB Controller

HP Smart Array P400i/512MB BBWC Controller




Please see NOTES below regarding hard drive quantity supported by Smart Array Controller.

NOTE: The Smart Array E200i Controller can support a maximum of 4 hard drives.

NOTE: The Smart Array P400i Controller can support a maximum of 6 hard drives. To support drives 5 and 6, the optional

HP Mini SAS 4i 13.4 inch/0.35 m cable is required (PN 399546-B21).

NOTE: The Smart Array P600 Controller requires HP SAS 4i to Mini SAS 4i 31 inch/.79 meter cable (PN 411100-B21).


QuickSpecs


Storage

Serial-ATA (SATA) Hard Drive

60GB 1.5G SATA 5.4K

Quantity

Supported

6

Position


1-6 HP Smart Array E200i/64MB Controller

HP Smart Array P400i/512MB BBWC Controller




Please see NOTES below regarding hard drive quantity supported by Smart Array Controller.

NOTE: The Smart Array E200i Controller can support a maximum of 4 hard drives.

NOTE: The Smart Array P400i Controller can support a maximum of 6 hard drives. To support drives 5 and 6, the optional

HP Mini SAS 4i 13.4 inch/0.35 m cable is required (PN 399546-B21).

NOTE: The Smart Array P600 Controller requires HP SAS 4i to Mini SAS 4i 31 inch/.79 meter cable (PN 411100-B21).

External Storage

Modular Smart Array 20

Family


Family


Enclosure

Modular Smart Array

500 G2 System

Quantity

Supported

Please see the

Modular Smart

Array 20

QuickSpecs to determine configuration requirements

Please see the

Modular Smart

Array 30

QuickSpecs to determine configuration requirements.

2

1

Modular Smart Array

1500 cs

Position

Supported Host Controller or Adapter

External Smart Array 6402/128 Controller



External

External

External





Smart Array 642 Controller (used as Host Bus Adapter)

Please see the Modular Smart Array 500 G2 QuickSpecs for the latest list of supported HBAs: http://www.hp.com/go/msa500

External Please see the Modular Smart Array 1500 cs QuickSpecs (URL below) for the latest list of supported HBAs

Modular Smart Array

1000

Please see the

Modular Smart

Array 1500 cs

QuickSpecs below to determine configuration requirements

Please see the

Modular Smart

Array 1000

QuickSpecs below to determine configuration requirements

External Please see the Modular Smart Array 1000 QuickSpecs (URL below) for the latest list of supported HBAs


QuickSpecs

Storage

Modular Smart Array 1000: http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML

Modular Smart Array 1500 cs: http://www.hp.com/go/MSA1500cs


Tape Drives, Tape Autoloaders, & Tape Libraries

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/North_America/10233.html

NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/North_America/10809.html

NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard drive cage would mean drive bay 8 is deactivated.

NOTE: For complete listing of tape drive offerings see http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html

For recommended tape drive offerings for this ProLiant server see the following:

Position

Supported

Controller

HP StorageWorks

Tape Drives, External

Ultrium 232

Ultrium 448

Ultrium 460

Ultrium 960

Ultrium 920

DAT 40

DAT 72

DLT VS160

SDLT 320

SDLT 600

External HP SC11Xe Host Bus Adapter

External USB 2.0 Port

HP StorageWorks

Tape Drives, External

DAT 24 USB

DAT 40 USB

DAT 72 USB

HP StorageWorks

Tape Drives, SAS

External

Ultrium 448 SAS

Ultrium 920 SAS

HP StorageWorks

Autoloaders, External

DAT 72x10 Autoloader

1/8 Tape Autoloader

External

External

HP 8 Internal Port SAS HBA with RAID 0/1

NOTE: Please visit http://www.hp.com/go/connect


Controller Part

Number

for details about minimum

SAS controller firmware version and SAS cabling requirements.

412911-B21

N/A

347786-B21

412911-B21


QuickSpecs

Storage

HP StorageWorks

SCSI Rack-Mount

Tape Drive

Enclosures

1U Rack-Mount Kit

3U Rack-Mount Kit

HP StorageWorks

USB Rack-Mount

Tape Drive

Enclosures

1U Rack-Mount Kit

HP StorageWorks

SAS Rack-Mount

Tape Drive

Enclosures

1U Rack-Mount Kit

External

External

External

HP StorageWorks

Tape Libraries,

External

MSL2024 (Ultrium 448,

Ultrium 920 and 960based)

MSL4048 (Ultrium 448,

Ultrium 920 and 960based)

MSL6000 (Ultrium 960 and 460-based)

MSL6000 (SDLT 600based)

External


USB 2.0 Port


HP 8 Internal Port SAS HBA with RAID 0/1

412911-B21

N/A

347786-B21

NOTE: Please visit http://www.hp.com/go/connect for details about minimum

SAS controller firmware version and SAS cabling requirements.

Please consult the EBS connectivity matrix at http://www.hp.com/go/ebs for detailed connectivity information.

N/A


QuickSpecs

Power Specifications


To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at URL: http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls

To drill down to calculators:

- Click on: "ProLiant Servers"

- Click on the Server of interest. Example: DL360 G5

- Click on: "Power Calculator" link. (You may need to scroll down to see it)


QuickSpecs

Technical Specifications

System Unit


Dimensions (H x W x D) 1.70 x 16.78 x 27.75 in (4.32 x 42.62 x 70.49 cm)

Weight

Maximum (six hard drives installed, two power supply, two processor)

No hard drives installed, one power supply, one processor

37 lb (16.78 kg)

27.5 lb (12.47 kg)

Input Requirements

Rated Input Voltage

Rated Input Current

100 to 240 VAC

7.1 Amps (at 120VAC) to 3.5 Amps (240 at

VAC)

Rated Input Frequency 50 to 60 Hz

Rated Input Power 852 W

BTU Rating

2910 BTU/HR (at 120 VAC); 2870 (at 240 VAC)

NOTE: The BTU rating listed is for the Rated Input Power of 852 W.

Power Specifications

To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: http://h30099.www3.hp.com/configurator/calc

/Power%20Calculator%20Catalog.xls

Power Supply Output

Power

(per power supply)

To drill down to calculators:

- Click on: "ProLiant Servers"

- Click on the Server of interest. Example: DL360 G5

- Click on: "Power Calculator" link. (You may need to scroll down to see it)

Rated Steady-State

Power

Temperature Range

Operating

700 W

Storage

50° to 95°F (10° to 35°C) at sea level with an altitude derating of 1.0°C per every 1000 ft

(300 m) above sea level to a maximum of

10,000 ft (3000 m), no direct sustained sunlight. Maximum rate of change is 10°C/Hr.

-40° to 158°F (-40° to 70°C) – Maximum rate of change is 20°C/Hr.

Relative Humidity

(non-condensing)

Operating

Storage

82.4°F (28°C)

10 to 90% relative humidity (Rh), 82.4°F

(28°C) maximum wet bulb temperature

5 to 95% relative humidity (Rh), based upon a maximum temperature of 113° F (45° C).

Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.

Maximum Wet Bulb

Temperature

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels

(LpAm) when the product is operating in a 73.4°F (23°C) ambient environment. Noise emissions were measured in accordance with ISO

7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA

109).

Idle:

L

WAd

(BELS) 6.6


QuickSpecs


Smart Array E200i

Controller


L pAm

(dBA)

Operating:

L

WAd

(BELS)

L pAm

(dBA)

50

6.9 BELS

53 dBA

Disk Drive and

Enclosure Interface

3G SAS (Serial Attached SCSI)

1.5G SATA (Serial Advanced Technology Attachment)

SAS Connectors

2 internal (SFF8484) x4 wide port connectors

Cache Memory Speed DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.

Server Interface

SAS Speed

Cache Memory

x4 2.5G PCIe provides 2GB/s maximum bandwidth.

x8 3G SAS provides 2.4GB/s maximum bandwidth.

40-bit 64MB or 128MB cache: ECC protection, battery-backed, and transportable

Up to 32 logical volumes

Logical Volumes

Supported

Maximum Volume

Capacity

Host Memory

Addressing

3TB (6 x 500GB)

64-bit, supporting greater than 4GB server memory space

RAID Support

RAID 5 (Distributed Data Guarding) requires 128MB BBWC option

RAID 1, 1+0 (Striping & Mirroring)

RAID 0 (Striping)

Upgradeable Firmware Upgradeable Firmware

Smart Array P400i

Controller

Disk Drive and

Enclosure Interface

3G SAS (Serial Attached SCSI)

1.5G SATA (Serial Advanced Technology Attachment)

2 internal (SFF8484) x4 wide port connectors

SAS Connectors

Cache Memory Speed DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth.

Server Interface

x8 2.5G PCIe provides 2GB/s maximum bandwidth.

SAS Speed

Cache Memory

x8 3G SAS provides 2.4GB/s maximum bandwidth.

40-bit 256MB cache (72-bit 512MB module upgrades available); ECC protection, battery-backed, and transportable

Logical Drives

Supported

Maximum Logical

Drive Capacity

Host Memory

Addressing

RAID Support

Up to 32 logical drives

3 TB (6 x 500GB)

64-bit, supporting greater than 4GB server memory space

RAID 6 with ADG (Advanced Data Guarding) requires Battery Backed

Write Cache Upgrade

RAID 5 (Distributed Data Guarding)

RAID 1+0 (Striping & Mirroring)

RAID 0 (Striping)

Upgradeable Firmware Upgradeable Firmware with recovery ROM feature


QuickSpecs



Embedded NC373i

Multifunction Gigabit

Server Adapters

Network Interface

10/100/1000-T

Compatibility

EEE 802.3 10Base-T

IEEE 802.3ab 1000Base-T

IEEE 802.3u 100Base-TX

Data Transfer Method

PCI Express, four lanes (x4)

Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s

10Base-T (Full-Duplex) 20 Mb/s

100 Mb/s 100Base-TX (Half-

Duplex)

100Base-TX (Full-

Duplex)

200 Mb/s

2000 Mb/s

Connector

Cable Support

1000Base-TX (Half and

Full-Duplex)

RJ-45

10Base-T

10/100/1000 Base-TX

Categories 3, 4 or 5 UTP up to 328 ft (100 m)

Category 5 UTP up to 328 ft (100 m)

© Copyright 2006 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel

Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.


QuickSpecs HP ProLiant DL360 Generation 5 Overview

What's New

At A Glance

Models

Step 1: Base Configuration (choose one of the following configurable models)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Step 3: Choose Additional Factory Integratable Options

Step 4: Choose Additional Options for Factory Integration

Drive Support

Related manuals

Table of contents

QuickSpecs HP ProLiant DL360 Generation 5 Overview

What's New

At A Glance

Models

Step 1: Base Configuration (choose one of the following configurable models)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Step 3: Choose Additional Factory Integratable Options

Step 4: Choose Additional Options for Factory Integration

Drive Support

Related manuals

Compaq

StorageWorks 1500cs - Modular Smart Array

HP

457924-421

Table of contents