Samsung DVD-HD755 User manual

Add to my manuals
62 Pages

advertisement

Samsung DVD-HD755 User manual | Manualzz
DVD Player
DVD-HD755
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13) Unplug this apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-2
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock or
personal injury.
This symbol indicates important
instructions accompanying the
product.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose
this appliance to rain or moisture.
CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and
televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-3
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• The product unit accompanying this user manual is licensed under certain intellectual property rights
of certain third parties. In particular, this product is licensed under the following US patents:
5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655,
5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and
under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-4
Before you start
Accessories
Remote
Control
(AK59-00011K)
Batteries for
Remote Control
(AAA Size)
(AC43-12002H)
User’s Manual
(AK68-00846A)
Video/Audio
Cable
(AC39-42001R)
Install Batteries in the Remote control
1
Open the battery
cover on the back of
the remote control.
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries (Dry-Cell)
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-5
HDMI Cable
(MF39-00299A)
TA B L E
OF
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 1: Setup
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 2: Connections
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 3: Basic Functions
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chapter 4: Advanced Functions
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Clips Menu for MP3/WMA/JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
MP3/WMA Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Chapter 5: Changing Setup Menu
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting Up EZ-Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Chapter 6: Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-6
Chapter 1
Setup
SETUP
General Features
Note
- Discs which cannot be played with this
player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• CVD
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
- Ability to play back the following discs may
depend on recording conditions.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
- The unit may not play certain CD-R, CD-RW
and DVD-R discs due to the disc type or
recording conditions.
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An important scene can be viewed in slow motion.
Program Play (CD)
You can program tracks to play in desired order.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
COPY PROTECTION
Progressive Scan
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure
digital video/audio signal path from the player to
your TV.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVD
player directly to your TV, not to a VCR. Connecting
to a VCR results in a distorted picture from copyprotected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
PROGRESSIVE SCAN OUTPUTS (525p)
PLEASE NOTE THATNOTALLHIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCTAND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IF 525 PROGRESSIVE
SCAN PICTURE PROBLEMS OCCUR, ITIS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING
YOUR TV SET COMPATIBILITY WITH THIS DVD
PLAYER, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER.
ENG-7
SETUP
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Disc Types (Logos)
Recording Types
DVD-VIDEO
Audio
+
Video
VIDEO-CD
Audio
+
Video
AUDIO-CD
Disc Size
Max. Playing Time
5"
Single-sided 240 min.
Double-sided 480 min.
31/2"
Single-sided 80 min.
Double-sided 160 min.
5"
74 min.
31/2"
20 min.
5"
74 min.
31/2"
20 min.
Disc Markings
NTSC
DIGITAL
SOUND
Play Region Number
NTSC broadcast system in U.S.A, Canada, Korea,
Japan, etc.
Stereo disc
Digital Audio disc
DTS disc
MP3 disc
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the DVD
player.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Region Number
Dolby Digital disc
STEREO
- DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
- Various screen and audio functions
can be easily selected through the
on-screen menu.
- Video with CD sound, VHS quality &
MPEG-1 compression technology.
Audio
~
Characteristics
ENG-8
Both the DVD player and the discs are
coded by region. These regional
codes must match in order for the disc
to play. If the codes do not match, the
disc will not play.
The Region Number for this player
is described on the rear panel of the
player.
SETUP
Setup
Description
Front Panel Controls
STANDBY/ON
12
1.
3 4 5 6 7 8
9
STANDBY/ON (
)
When the unit is first plugged in, this indicator lights.
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
10
6.
SKIP (
) / SEARCH
Use to forward skip a scene or music.
7.
EZ VIEW
The aspect ratio of a picture can easily be adjusted to
your TV's screen size (16:9 or 4:3).
2.
POWER INDICATOR
3.
SKIP (
) / SEARCH
Use to reverse skip a scene or music.
8.
OPEN/CLOSE (
)
Press to open and close the disc tray.
4.
STOP (
)
Stops disc play.
9.
DISPLAY
Operation indicators are displayed here.
5.
PLAY/PAUSE (
)
Begin or pause disc play.
10. DISC TRAY
Place the disc here.
Front Panel Display
1
1.
Chapter/Track number indicator
2.
Total playing time/Displays various
messages concerning operations
such as PLAY, STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
2
ENG-9
SETUP
Rear Panel
5
1
1.
2.
3.
6
2
3
HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
- If you want to use a Video, S-Video or Component
Output, set the output in the menu (see page 53) or
unplug the HDMI cable.
4
4.
S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
5.
DIGITAL AUDIO OUT JACKS
- Use a coaxial digital cable to connect to a compatible
Dolby Digital receiver.
- Use a coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2 or DTS
decoder.
6.
COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y video.
- If HDMI/COMPONENT(P-SCAN) Video Output is
selected in Setup Menu, progressive scan mode will
work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 52 ~ 54 to get more information on how to use the setup menu.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-10
SETUP
Setup
Tour of the Remote Control
1
11
1.
DVD POWER Button
Turns the power on or off.
2.
NUMBER Buttons
3.
PROG Button
Allows you to program tracks in a specific order.
4.
STEP Button
Advances play one frame at a time.
5.
SEARCH/SKIP Buttons (
,
/
/
Allow you to search forward/backward through a disc.
Use to skip the title, chapter or track.
2
3
4
12
13
14
5
6
7
15
16
8
17
18
6.
STOP Button (
7.
MENU Button
Brings up the DVD player’s menu.
8.
RETURN Button
Returns to a previous menu.
9.
REPEAT A-B Button
Allows you to repeat play A-B on a disc.
)
)
10. SUBTITLE Button
11. OPEN/CLOSE (
) Button
To open and close the disc tray.
12. CLEAR Button
Use to remove menus or status displays from the screen.
9
19
10
20
21
22
13. INSTANT REPLAY Button
This function is used to replay the previous 10 seconds of a
movie from the current position.
14. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
15. PLAY/PAUSE Button (
Begin/Pause disc play.
)
16. INFO Button
Displays the current disc mode.
17. DISC MENU Button
Brings up the Disc menu.
…†œ √ Buttons
18. ENTER/…
These buttons enable you to navigate and choose items in
the menus.
19. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted according
to the screen size of your TV (16:9 or 4:3).
20. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
21. ANGLE Button
Use to access various camera angles on a DVD.
22. AUDIO Button
Use this button to access various audio functions on a disc.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-11
Chapter 2
CONNECTION
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
RED
Audio Cable
RED
YELLOW
WHITE
WHITE
Video Cable
YELLOW
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable is placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- When the Video Output in Setup menu is set to HDMI/COMPONENT(P-SCAN), the Video and S-Video
Outputs do not work.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-12
CONNECTION
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.
1
Using an S-Video cable (not included), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
3
Press the input selector on your TV remote control until the SVideo signal from the DVD player appears on your TV screen.
WHITE
Audio Cable
RED
S-Video Cable
(not included)
WHITE
4
Set the Video Output to COMPOSITE/S-VIDEO in the Display
Setup menu. (See pages 52 to 53)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-13
Connections
- You will enjoy high quality video. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
CONNECTION
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
RED
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
RED
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
BLUE
GREEN
WHITE
Audio Cable
RED
WHITE
RED BLUE
GREEN
Component cable
(not included)
4
Set the Video Output to COMPONENT (I-SCAN) in the Display
Setup menu. (See pages 52 to 53)
Note
- If Video output is incorrectly set to Composite/S-Video with the Component cables connected, the
screen will turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”
depending on the manufacturer. The number and location of the terminals may vary depending on the TV
set. Please refer to the user's manual of your TV.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-14
CONNECTION
Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
RED
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
RED
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
BLUE
GREEN
WHITE
Audio Cable
RED
WHITE
RED BLUE
GREEN
Component cable
(not included)
4
Set the Video Output to HDMI/COMPONENT (P-SCAN) in the
Display Setup menu. (See pages 52 to 53)
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings
in the TV’s menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-15
Connections
2
CONNECTION
Connecting to a TV with DVI Jack
1
Using an HDMI-DVI cable (not included), connect the HDMI
OUT terminal on the rear of the DVD player to the DVI IN
terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
HDMI-DVI cable
(not included)
WHITE
Audio Cable
RED
WHITE
3
Press the input selector on your TV remote control until the DVI
signal from the DVD player appears on your TV screen.
Connecting to a TV with HDMI Jack
1
Using the HDMI-HDMI cable, connect the HDMI OUT terminal
on the rear of the DVD player to the HDMI IN terminal of your
TV.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
HDMI cable
Note
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.
- If you set the HDMI output resolution 720p or 1080i, the picture quality will improve.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-16
CONNECTION
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI connection description
- The player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal
from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD, etc) and a
display device (TV, projector, etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-17
Connections
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bitstream data).
CONNECTION
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN
terminal of your TV as described on pages 12 to 16.
3
RED
Turn on the DVD player, TV, and Amplifier.
WHITE
Audio Cable
RED
WHITE
2-Channel stereo amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-18
CONNECTION
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using a coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
Connections
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN
terminals of your TV as described on pages 12 to 16.
Coaxial Cable
(not included)
3
Turn on the DVD player, TV, and Amplifier.
Dolby digital or
DTS amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- When you connect the DVD player to a DTS Amplifier and play a DTS disc, set the DTS to On in
Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-19
Chapter 3
BASIC FUNCTIONS
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input using your TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this
screen appears: If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want to
use.
Once you select a menu language, you can change it by pressing the
button on the
front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Press
Touche
Drücken Sie
Pulsar
1 for English
2 pour Français
3 für Deutsch
4 para Español
Premere
5 per Italiano
Druk op
6 voor Nederlands
Playback
1
Press the OPEN/CLOSE
( ) button.
The STANDBY indicator
light turns off and the tray
opens.
2
Place a disc gently into the
tray with the disc’s label
facing up.
▼
RESUME function
3
When you stop disc play, the player remembers
where you stopped, so when you press
PLAY/PAUSE ( ) button again, it will pick up
where you left off. (unless the disc is removed
the player is unplugged, or if you press the
STOP ( ) button twice.)
Press the PLAY/PAUSE ( )
button or OPEN/CLOSE ( )
button to close the disc tray.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-20
BASIC FUNCTIONS
4
Stopping Play
Press the STOP ( ) button
during play.
Note
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
( ) button to resume normal play.
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
5
Removing Disc
Press the OPEN/CLOSE
( ) button.
Pausing Play
Press the PLAY/PAUSE
( ) or STEP button on the
remote control during play.
) button
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
▼
Each time the button is pressed, a new frame
will appear.
No sound is heard during STEP mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
You can only perform step motion play in the
forward direction.
7
Step Motion Play (Except
CD)
Press the STEP button on
the remote control during play.
Slow Motion Play (Except
CD)
Press and hold the SEARCH
( ) button to choose the
play speed between 1/8, 1/4
and 1/2 of normal during
PAUSE or STEP mode.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
No sound is heard during slow mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
Reverse slow motion play will not work.
▼
8
Note
This ( ) icon indicates the function is not
available in the current mode.
ENG-21
Basic Functions
▼
Screen stops, no sound.
To resume, press the PLAY/PAUSE (
once again.
6
BASIC FUNCTIONS
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
▼
During play, press and hold the SEARCH
( or ) button and press and hold again to
search at a faster speed.
During play, press the
SEARCH ( or
)
button on the remote
control for more than 1
second.
DVD
2X, 4X, 64X, 128X
VCD
4X, 8X
CD
2X, 4X, 8X
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound heard during search mode
(Except Audio CD).
Skipping Tracks
During play, press the SKIP
(
or
) button.
- When playing a DVD, if you press the SKIP ( )
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a CD, VCD 1.1 or VCD 2.0 in
Menu Off mode, if you press the SKIP ( )
button, it moves to the next track. If you press
the SKIP ( ) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a
VCD and you press the
button, it moves
forward 5 minutes. If you press the
button,
it moves backward 5 minutes.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Note
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-22
BASIC FUNCTIONS
Using the Display Function
When Playing a DVD/VCD/CD
▼
You can also select Info in the function menu by
pressing the MENU button.
1
During play, press the
INFO button on the remote
control.
2
DVD
01
02
0:00:13
ENG 5.1CH
Off
VCD
▼
When playing a VCD 2.0, this function works in
Menu Off mode only. Select Menu Off by
pressing the DISC MENU button.
01
0:00:43
CD
01
0:00:48
▼
You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from a desired time.
3
Press the œ/√ buttons to
make the desired setup and
then press the ENTER
button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-23
Basic Functions
Press the …/† buttons to
select the desired item.
BASIC FUNCTIONS
4
To make the screen
disappear, press the INFO
button again.
Note
To access the desired title when there is more than one on the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language. In the example, the soundtrack is played in English
5.1CH.
A DVD disc can have up to eight different soundtracks.
Refers to the subtitle languages available on the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-24
BASIC FUNCTIONS
Using the Disc and Title Menu
Using the Disc Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press ENTER key
for Disc Menu
Using the Title Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press the …/† buttons to
select Title Menu, then
press the √ or ENTER
button.
Press ENTER key
for Title Menu
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Note
- Depending on the disc, the Title Menu may not
be avaliable.
- Title Menu will only be displayed if there are at
least two titles in the disc.
ENG-25
Basic Functions
Press the …/† buttons to
select Disc Menu, then
press the √ or ENTER
button.
Note
- Depending on the disc, the Disc Menu may not
be avaliable.
- You can also use the Disc Menu, using the DISC
MENU button on the remote control.
- In VCD 2.0 the DISC MENU button is used to
select Menu On or Menu Off mode.
BASIC FUNCTIONS
Using the Function Menu
Using the Function Menu (DVD/VCD)
1
Press the MENU button
during playback.
2
Press the …/† buttons to
select Function, then press
the √ or ENTER button.
- Info (See pages 23 to 24)
- Zoom (See page 37)
- Bookmark
(See pages 35 to 36)
- Repeat (See pages 27 to 28)
- EZ View
(See pages 30 to 31)
Info
Zoom
Bookmark
Repeat
EZ View
Press the …/† buttons to
select one of the five
functions. Then press the
√ or ENTER button to
access the function.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
You can also directly select these functions
using their respective buttons on the remote
control.
▼
3
Note
- For VCD2.0, this function is available in Menu Off
mode only. Select Menu Off by pressing the
DISC MENU button.
ENG-26
BASIC FUNCTIONS
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD/CD
1
During play, press the
REPEAT button on the
remote control.
Repeat screen appears.
DVD
Press the œ/√ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
Off
01
T
01 A-B
REPEAT
ENTER
01 A-B
REPEAT
ENTER
VCD/CD
Off
T
01
D
Using the A-B Repeat function
1. Press the REPEAT A-B button at the point where you want repeat play to start (A).
A is automatically highlighted.
2. Press the REPEAT A-B again at the point where you want repeat play to stop (B).
- To return to normal play, press the CLEAR button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
3
To return to normal play,
press REPEAT button
again, then press the œ/√
buttons to select Off and
press ENTER button.
DVD
Off
01
T
01 A-B
REPEAT
ENTER
01 A-B
REPEAT
ENTER
VCD/CD
Off
T
01
Downloaded From DvDPlayer-Manual.com Samsung Manuals
D
Note
- Depending on a disc, the Repeat function may
not be available.
- When playing a VCD 2.0, this function works in
Menu Off mode only. Select Menu Off by
pressing the DISC MENU button.
ENG-27
Basic Functions
DVD repeats play by chapter or title, CD and
VCD repeat play by disc or track.
Chapter ( ): repeats the chapter that is
playing.
Title ( ): repeats the title that is playing.
Disc ( ): repeats the disc that is playing.
Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
▼
2
BASIC FUNCTIONS
Slow Repeat Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD/VCD
1
During play, press the
PLAY/PAUSE ( ) button.
2
Press and hold the
SEARCH ( ) button to
choose the play speed
between 1/8, 1/4 and 1/2 of
normal during PAUSE or
STEP mode.
▼
The disc will play from A to B repeatedly at the
speed you chose.
▼
3
To set A-B REPEAT, set (A) first, then set (B)
after the following slow play time has elapsed:
1/8x: wait 40 seconds, then press B
Press the REPEAT button
on the remote control.
Press the œ/√ buttons to
select A-B.
4
Press the ENTER button at
the point where you want
repeat play to start (A).
A is automatically
highlighted. Press the
ENTER button at the point
where you want the repeat
play to stop (B).
1/4x: wait 20 seconds, then press B
1/2x: wait 10 seconds, then press B
5
To return to normal play,
press the CLEAR button and
then press the PLAY/PAUSE
( ) button.
Note
When playing a VCD 2.0, this function works in
Menu Off mode only. Select Menu Off by pressing
the DISC MENU button.
Using the A-B Repeat function
1. During slow playback, press the REPEAT A-B button at the point where you want repeat play to
start (A). A is automatically highlighted.
2. Press the REPEAT A-B button again at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button and then press the PLAY/PAUSE( ) button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-28
BASIC FUNCTIONS
Program Play & Random Play
Program Play (Audio CD)
Program Play allows you to select the order in which you want tracks to play.
1
During play, press the
PROG button.
Press the œ/√ buttons to
select PROGRAM.
Press the ENTER button.
PROGRAM
œ√
RANDOM
▼
3
Press the …/†/œ/√ buttons
to select the first track to
add to the program.
Press the ENTER button.
The selection numbers
appear in the Program
Order box.
PROGRAM 01
Track
01
05
09
13
02
06
10
14
03
07
11
15
Program Order
04
08
12
16
------
------
------
------
- To return to the previous menu screen, press
the RETURN button.
- To cancel the selected program order, press
the CLEAR button.
- This unit can support a maximum of 20
programed tracks.
4
Press the PLAY/PAUSE
( ) button.
The disc will be played in
programed order.
Random Play (CD)
Random Play plays a disc's tracks in random order.
1
Press the PROG button.
PROGRAM
œ√
2
Press the œ/√ buttons to
select RANDOM.
Press the ENTER button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
RANDOM
Note
- Depending on a disc, the Program and Random
Play functions may not be avaliable.
- While in playback mode, press the CLEAR
button on the remote control to cancel Program
Play or Random Play.
ENG-29
Basic Functions
2
Chapter 4
A D VA N C E D F U N C T I O N S
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
▼
During play, press the EZ
VIEW button.
- The screen size
changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the Display
Setup menu.
- To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Setup menu.
(See pages 52 to 53).
WIDE SCREEN
EZ VIEW
To make the aspect ratio bar disappear,
press the CLEAR or RETURN button, or
just wait 5 seconds.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- WIDE SCREEN
Displays the content of the DVD title in 16:9 aspect ratio.
- Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at the top
and bottom of the screen will disappear. The picture will
look vertically stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-30
A D VA N C E D F U N C T I O N S
If you are using a 4:3 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
- Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
- 4:3 Pan & Scan
The left and right portions of the screen are cut off and the
central portion of the 16:9 screen is displayed.
- SCREEN FIT
The top and bottom portions of the screen are cut off and a
full screen appears.
The picture will look vertically stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
EZ View may behave differently depending on the type of disc.
Advanced
Functions
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-31
A D VA N C E D F U N C T I O N S
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/CD)
1
During play, press the
AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH
When playing a VCD or CD,
you can select among
Stereo, Right or Left.
AUDIO
VCD/CD
Stereo
AUDIO
2
To remove the AUDIO
icon, press the CLEAR or
RETURN button.
Note
- This function depends on audio languages that
are encoded on the disc and may not be
available.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come up
whenever you play a DVD, refer to “Using the
Audio Language” on page 48.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-32
A D VA N C E D F U N C T I O N S
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD)
1
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
abbreviations.
DVD
Off
SUBTITLE
2
Note
- Depending on the DVD, you can change desired
subtitle in the Disc Menu.
Press the DISC MENU button.
- This function depends on what subtitles are
encoded on the disc and may not be available on
all DVDs.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come up
whenever you play a DVD;
Refer to “Using the Subtitle Language” on page
49.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-33
Advanced
Functions
To remove the SUBTITLE
icon, press the CLEAR or
RETURN button.
A D VA N C E D F U N C T I O N S
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the ANGLE button (DVD)
If the disc contains multiple angles, the ANGLE icon appears on the screen.
1
Press the ANGLE button,
then the ANGLE icon will
appear with the current
angle number and the
number of angles
available.
2
4/6
ANGLE
Press the ANGLE button
repeatedly to select the
desired angle. To remove
the ANGLE icon, press the
CLEAR or RETURN
button.
Note
If the disc has only one angle, this feature won’t
work. Currently, very few discs have this
feature.
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
Press the INSTANT
REPLAY button.
- The current scene
moves backward about
10 seconds, and plays
back.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the INSTANT SKIP
button.
- Playback will skip ahead
10 seconds.
Note
Depending on the disc, these functions may not
work.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-34
A D VA N C E D F U N C T I O N S
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode), so you can quickly find
them at a later time.
Using the Bookmark Function (DVD/VCD)
1
During play, press the
MENU button on the
remote control.
2
† buttons to
Press the …/†
select Function, then
press the √ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
3
Info
Zoom
Advanced
Functions
† buttons to
Press the …/†
select Bookmark, then
press the √ or ENTER
button.
Bookmark
Repeat
EZ View
4
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
Note
- When playing VCD 2.0, this function works only
when the menu is off.
- Depending on a disc, the Bookmark function may
not work.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-35
A D VA N C E D F U N C T I O N S
Recalling a Bookmarked Scene
1~3
The first 1~3 steps are the
same as those for “Using
the Bookmark Function”
on page 35.
4
Press the œ/√ buttons to
select a marked scene.
5
Press the PLAY/PAUSE
(
) button to Play the
marked scene.
Clearing a Bookmark
1~3
The first 1~3 steps are the
same as those for “Using
the Bookmark Function”
on page 35.
4
Press the œ/√ buttons to
select the bookmark
number you want to delete.
5
Press the CLEAR button
to delete a bookmark
number.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-36
A D VA N C E D F U N C T I O N S
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
1
During play or pause
mode, press the MENU
button on the remote
control.
2
† buttons to
Press the …/†
select Function, then
press the √ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
3
† buttons to
Press the …/†
select Zoom, then press
the √ or ENTER button.
Info
Zoom
Bookmark
Repeat
▼
4
† or œ/√
Press the …/†
buttons to select the part
of the screen you want to
zoom in on.
Press the ENTER button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
During VCD play, press ENTER to zoom in
2X/Normal in order.
Note
For VCD2.0, this function works in Menu Off mode
only. Select Menu Off by pressing the DISC MENU
button.
ENG-37
Advanced
Functions
EZ View
A D VA N C E D F U N C T I O N S
Clips Menu for MP3/WMA/JPEG
Discs with MP3/WMA/JPEG contain individual songs and/or pictures that can be
organized into folders as shown below. They are similar to how you use your
computer to put files into different folders.
Open the disc tray.
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
Off
ROOT
ROOT
WMA
JPEG
MP3
Parent Folder, Current Folder Folders and Files in
Current Folder
and Peer Folders
-
: Name of currently playing file.
-
: MP3 file icon.
-
: Current Playback Time.
-
: WMA file icon.
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
-
: JPEG file icon.
-
: Folder icon.
-
: Current Folder icon.
Folder Selection
The folder can only be selected in the Stop mode.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
† buttons to select “..” and
or press the …/†
press ENTER to go to the parent folder.
- To select the Peer Folder
Press the œ/√ buttons to highlight the left window.
† buttons to select the desired folder,
Press the …/†
then press ENTER.
Root
WMA
JPEG
Parent Folder
MP3
MUSIC
- To select the Sub-Folder
Press the œ/√ buttons to highlight the right window.
† buttons to select the desired folder,
Press the …/†
then press ENTER.
Current Folder
1st
Sub-Folders
2nd
SONG FILE 1
Peer Folders
SONG FILE 2
SONG FILE 3
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-38
A D VA N C E D F U N C T I O N S
MP3/WMA Playback
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
Off
ROOT
ROOT
WMA
JPEG
MP3
▼
2
When a disc contains MP3 and WMA
files, only MP3 will play, not both.
† or œ/√
Press the …/†
buttons to select a song
file.
Press ENTER to begin
playback of the song file.
Off
00:00:23
B e c a u s e Yo u
ROOT
..
WMA
B e c a u s e Yo u
JPEG
MP3
Cactus
Sad Dayu
Wonderful
Advanced
Functions
Repeat/Random playback
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
To resume normal play, press the CLEAR button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-39
A D VA N C E D F U N C T I O N S
CD-R MP3/WMA file
When you record MP3 or WMA files on CD-R, please refer
to the following.
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's Windows, and with Apple's Mac.
This format is the most widely used.
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
- Use a compression rate of at least 128 Kbps when
recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression you choose. Getting CD audio sound
requires an analog/digital sampling rate, that is converted to
MP3 format, of at least 128 Kbps and up to 160 Kbps.
However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, of 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of Microsoft
Inc) and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- This unit can play a maximum of 3000 files and 300 folders
per disc.
ENG-40
A D VA N C E D F U N C T I O N S
Picture CD Playback
Off
1
† buttons to
Press the …/†
select the desired Folder, then
press ENTER.
ROOT
ROOT
WMA
JPEG
MP3
2
Off
† buttons to
Press the …/†
select a Picture file in the
clips menu and then press
the ENTER button.
ROOT
..
WMA
1
JPEG
2
MP3
3
3
Note
- If no buttons on the remote control are pressed
for 10 seconds, the menu will disappear.
ENTER RETURN
Press the INFO button to
display the menu.
Press the œ/√ buttons to
select the menu you want
to view, then press the
ENTER button.
- Press the STOP button to return to the clips
menu.
Album Screen
•
Slide Show
: Returns to the Album Screen.
• To see the next six pictures, press the
TIMER:
ENTER RETURN
button.
• To see the previous six pictures, press the
button.
Rotation
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
Zoom
† or œ/√ buttons to select the
: Press the …/†
part of the screen you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 4X. (2X ➝ 4X ➝ 2X ➝ Normal)
•
: The unit enters slide show mode.
• Before beginning the Slide Show, set the picture interval.
Press the œ/√ buttons to select a desired icon, then press the
ENTER button.
•
: The pictures change automatically with about a 6
second interval.
•
: The pictures change automatically with
about a 12 second interval.
•
: The pictures change automatically with
about a 18 second interval.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
ENG-41
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Advanced
Functions
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
A D VA N C E D F U N C T I O N S
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters
(. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can
be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.
- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-42
Chapter 5
CHANGING SETUP
MENU
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
1
With the unit in Stop
mode, press the MENU
button on the remote
control.
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options.
ˇ Display Setup : Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
¨ Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc.
ˆ EZ Setup : Using the EZ Setup, you can setup PLAYER MENU LANGUAGE, TV Aspect, and
PCM Down Sampling in a single menu to suit your preference.
Œ
´
2
Changing
Setup Menu
† buttons to
Press the …/†
access the different
features. Press the √ or
ENTER button to access
the sub features.
3
To make the setup screen
disappear after setting up,
press the MENU button
again.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Note
Depending on the disc, some Setup menu
selections may not be available.
ENG-43
CHANGING SETUP
MENU
Setting Up EZ-Setup
Using the EZ Setup, you can setup PLAYER MENU LANGUAGE, TV Aspect, and PCM Down
Sampling in a single menu to suit your preference.
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select EZ Setup, then
press the √ or ENTER
button.
4
To begin EZ Setup, press
† buttons to select
the …/†
Yes, then press the
ENTER button.
5
† buttons to
Press the …/†
select the desired player
menu language, then
press the ENTER button.
Setup
EZ SETUP
EZ Setup start?
Yes
No
***Current Settings***
Player Menu Language
: English
TV Aspect
: Wide
PCM Down Sampling
: On
EZ SETUP
Player Menu Language
English
Français
Deutsch
Español
Italiano
Nederlands
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-44
CHANGING SETUP
6
† buttons to
Press the …/†
select the desired TV
Aspect, then press the
ENTER button.
(See page 53)
7
† buttons to
Press the …/†
select the PCM Down
Sampling On or Off, then
press the ENTER button.
(See page 51)
MENU
EZ SETUP
TV Aspect
4:3 Letter Box
4:3 Pan&Scan
16:9 Wide
EZ SETUP
PCM Down Sampling
Off
On
▼
8
Press the ENTER button
to finish.
EZ SETUP
To exit the setup menu, press the MENU
button.
Settings Complete
Press ENTER to exit
Changing
Setup Menu
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-45
CHANGING SETUP
MENU
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Language Setup,
then press the √ or
ENTER button.
Setup
4
† buttons to
Press the …/†
select Player Menu, then
press the √ or ENTER
button.
LANGUAGE SETUP
Player Menu
: English
√
Disc Menu
: English
√
Audio
: English
√
Subtitle
: Automatic
√
▼
5
† buttons to
Press the …/†
select the desired
language, then press the
√ or ENTER button.
PLAYER MENU LANGUAGE
Player Menu
Downloaded From DvDPlayer-Manual.com Samsung Manuals
English
- The language is selected and the screen
returns to Language Setup menu.
- To exit the setup menu, press the MENU
button.
Français
Deutsch
Español
Italiano
Nederlands
ENG-46
CHANGING SETUP
MENU
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Language Setup,
then press the √ or
ENTER button.
Setup
4
† buttons to
Press the …/†
select Disc Menu, then
press the √ or ENTER
button.
LANGUAGE SETUP
Player Menu
: English
√
Disc Menu
: English
√
Audio
: English
√
Subtitle
: Automatic
√
† buttons to
Press the …/†
select the desired
language, then press the
√ or ENTER button.
DISC MENU LANGUAGE
English
Disc Menu
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
Français
Deutsch
Español
Italiano
Nederlands
Others
- The language is selected and the screen
returns to Language Setup menu.
- To exit the setup menu, press the MENU
button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-47
Changing
Setup Menu
- Select “Others” if the language you want is
not listed.
▼
5
CHANGING SETUP
MENU
Using the Audio Language
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Language Setup,
then press the √ or
ENTER button.
Setup
4
† buttons to
Press the …/†
select Audio, then press
the √ or ENTER button.
LANGUAGE SETUP
Player Menu
: English
√
Disc Menu
: English
√
Audio
: English
√
Subtitle
: Automatic
√
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
▼
5
† buttons to
Press the …/†
select the desired
language, then press the
√ or ENTER button.
AUDIO LANGUAGE
Audio
English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
- Select “Others” if the language you want is
not listed.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To exit the setup menu, press the MENU
button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-48
CHANGING SETUP
MENU
Using the Subtitle Language
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Language Setup,
then press the √ or
ENTER button.
Setup
4
† buttons to
Press the …/†
select Subtitle, then press
the √ or ENTER button.
LANGUAGE SETUP
Player Menu
: English
√
Disc Menu
: English
√
Audio
: English
√
Subtitle
: Automatic
√
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
▼
† buttons to
Press the …/†
select the desired
language, then press the
√ or ENTER button.
Subtitle
Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
- Select “Others” if the language you want is
not listed. Some discs may not contain the
language you select as your initial language;
in that case the disc will use its original
language setting.
- The language is selected and the screen
returns to setup menu.
- To exit the setup menu, press the MENU
button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-49
Changing
Setup Menu
5
SUBTITLE LANGUAGE
CHANGING SETUP
MENU
Setting Up the Audio Options
Audio Options allow you to set up the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Audio Setup, then
press the √ or ENTER
button.
Setup
▼
4
† buttons to
Press the …/†
select the desired item,
then press the √ or
ENTER button.
AUDIO SETUP
Dolby/DTS Digital Out
: PCM
Dynamic Compression
: On
PCM Down Sampling
: On
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-50
To exit the setup menu, press the MENU
button.
CHANGING SETUP
MENU
Œ
Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
Note
• There is no analog audio output when you play a DTS disc.
´
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
ˇ
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off, some discs will only output down sampled audio through
the digital outputs.
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
Note
• To exit the setup menu, press the MENU button.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-51
Changing
Setup Menu
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHANGING SETUP
MENU
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Display Setup,
then press the √ or
ENTER button.
Setup
† buttons to
Press the …/†
select the desired item,
then press the √ or
ENTER button.
▼
4
DISPLAY SETUP
TV Aspect
: Wide
Still Mode
: Auto
√
Screen Messages
: On
Video Output
: COMPOSIT/S-VID √
HDMI
: 480p
Picture Quality
Downloaded From DvDPlayer-Manual.com Samsung Manuals
√
√
ENG-52
To exit the setup menu, press the MENU
button.
CHANGING SETUP
Œ
MENU
TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
¨
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan & Scan : Select this for
conventional size TVs when you want to
see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture
will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
TV ASPECT
4:3 Lettre Box
4:3 Pan & Scan
Video Output
Select Video Output.
- COMPOSITE/S-VIDEO : Select when you
want to use Video and S-Video Out.
- COMPONENT(I-SCAN) : Select when you
want to use Video and Component
525i(Interlace) Out.
- HDMI / COMPONENT(P-SCAN) : Select
when you want to use Component
525p(Progressive) Out or HDMI.
• If the Yes/No selection in the Display
Setup sub Menu is not made within 10
seconds, the screen returns to the
previous menu.
DISPLAY SETUP
TV Aspect
: Wide
Still Mode
: Auto
√
Screen Messages
: On
Video Output
: COMPOSIT/S-VID √
HDMI
: 480p
√
√
Picture Quality
16:9 Wide
DISPLAY SETUP
COMPOSITE/S-VIDEO
COMPONENT(I-SCAN)
Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically converted.
- Field : Select this feature when the screen
shakes in the Auto mode.
- Frame : Select this feature when you want
to see small letters more clearly in the Auto
mode.
ˇ
Screen Messages
Use to turn on-screen messages On or Off.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-53
HDMI / COMPONENT(P-SCAN)
Changing
Setup Menu
´
CHANGING SETUP
ˆ
MENU
HDMI
This setting is used when the unit is
connected by HDMI or DVI to Display
devices (TV, Projector, etc.).
- Resolution Setting
• Auto : Resolution setting automatically
• Manual : Resolution setting manually
- Resolution
• 480p : 720 x 480
• 720p : 1280 x 720
• 768p : 1024 x 768
• 1080i : 1920 x 1080
- Format
You can use this function to set HDMI or
DVI output's digital data RGB range.
• RGB-Normal : HDMI/DVI Limited range
RGB data output. This
should be used for TVs.
• RGB-Expand : HDMI/DVI Full range RGB
data output. This should be
used for PC Monitors.
• YCbCr-(4:4:4) : HDMI Limited range
YCbCr-(4:4:4) output.
• YCbCr-(4:2:2) : HDMI Limited range
YCbCr-(4:2:2) output.
If you set the HDMI output resolution to
768p, you cannot use YCbCr format.
Limited range - Black/White and color level
are displayed within a Limited data range.
ex) When the bit depth is 8 bits
- Y : 16~235 - levels of brightness
- CbCr : 16~240 - levels of color
Full range - Black/White and color level are
expressed within full data range.
ex) When the bit depth is 8 bits
- Y : 0~255 - levels of brightness
- CbCr : 0~255 - levels of color
HDMI SETUP
Resolution Setting
: Auto
Resolution
: 720p
Format
: RGB-Normal
Downloaded From DvDPlayer-Manual.com Samsung Manuals
- DVI Output
You can use this function to set HDMI to
DVI output format.
When the HDMI to DVI cable is plugged into
a TV, you can select either Mode A or Mode
B to set up the DVI output.
• This function corrects a TV screen when it
is not centered to secure a normal view.
• If HDMI to DVI Output is set incorrectly,
the screen can be biased.
Ø Picture
Quality
- Black Level : Adjusts the brightness of the
screen. (On or Off) It does not operate in
Progressive scan mode.
- Sharpness : Level 1 ~ Level 5
- Brightness : Level 1 ~ Level 5
- Color Saturation : Level 1 ~ Level 5
PICTURE QUALITY
Black Level
Sharpness
: Off
: Level 3
Brightness
: Level 3
Color Saturation
: Level 3
- Color Saturation is only available through
the analog outputs.
It is not possible to adjust the Color
Saturation in HDMI Mode.
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
• If Video Output is set incorrectly, the
screen may be distorted.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you set the HDMI output resolution to
720p or 1080i, HDMI output provides
better picture quality.
ENG-54
CHANGING SETUP
MENU
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Parental Setup,
then press the √ or
ENTER button.
Setup
4
: No
▼
5
Enter your password. The
Re-enter Password
screen appears to confirm
the password. Enter your
password again.
The player is locked ( ).
CREATE PASSWORD
Enter Password
----
CREATE PASSWORD
Re-enter Password
----
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-55
To exit the setup menu, press the MENU
button.
Changing
Setup Menu
Press the √ or ENTER
button to select Yes if you
want to use a password.
The Enter Password
screen appears.
PARENTAL SETUP
Use Password
CHANGING SETUP
MENU
Setting Up the Rating Level
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Parental Setup,
then press the √ or
ENTER button.
Setup
4
PASSWORD CHECK
Enter your password.
Enter Password
----
5
† buttons to
Press the …/†
select Rating Level, then
press the √ or ENTER
button.
PARENTAL SETUP
Use Password
: Yes
Rating Level
:8
Change Password
√
√
To exit the setup menu, press the MENU
button.
▼
6
† buttons to
Press the …/†
select the Rating Level
you want, then press the
√ or ENTER button.
e.g.) Setting up in Level 6.
RATING LEVEL
Level
Level
Level
Level
Level
Level
Level
Level
8 Adult
7
6
5
4
3
2
1 Kids Safe
Downloaded From DvDPlayer-Manual.com Samsung Manuals
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
ENG-56
CHANGING SETUP
MENU
Changing the Password
1
With the unit in Stop
mode, press the MENU
button.
2
† buttons to
Press the …/†
select Setup, then press
the √ or ENTER button.
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Language Setup
√
Audio Setup
√
Display Setup
√
Parental Setup :
√
EZ Setup
√
Setup
3
† buttons to
Press the …/†
select Parental Setup,
then press the √ or
ENTER button.
The Enter Password
screen appears.
Enter your password.
Setup
4
PARENTAL SETUP
Use Password
: Yes
Rating Level
:8
√
√
Change Password
Changing
Setup Menu
† button to
Press the …/†
select Change Password,
then press the √ or
ENTER button.
Enter your new password.
Re-enter the new
password again.
CHANGE PASSWORD
Enter New Password
----
▼
CHANGE PASSWORD
To exit the setup menu, press the MENU
button.
Re-enter Password
----
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Note
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting Guide.
(See page 58)
ENG-57
Chapter 6
REFERENCE
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Action
Problem
No operations can be
performed with the
remote control.
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is
not being reproduced.
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
Page
P5
P8
P19
P50~51
The
icon appears
on screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
P50~51
The screen is blocked
• Press the
button for more than 5 seconds with no disc inside and the tray
closed. All settings will revert to the factory settings.
P20
Forgot password
• Press the
button for more than 5 seconds with no disc inside and the tray
closed. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
If you experience other
problems.
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center or call 1-800-SAMSUNG.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-58
P43~57
P52~53
P55~57
P4
REFERENCE
Action
Problem
No HDMI output.
Page
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 480p/720p/768p/1080i DVD player.
P16~17
Abnormal HDMI output
screen.
• If snow noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
P16~17
HDMI output Jitter
• Check your TV system setup correctly.
• The screen Jitter phenomenon may occur when frame rate is converted from
50Hz to 60Hz for 720P/1080i HDMI (High Definition Multimedia Interface)
Output.
• Please refer to the user’s manual of your TV.
P52~54
Reference
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-59
REFERENCE
Specifications
General
Power Requirements
AC 120V, 60 Hz
Power Consumption
12 W
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
Disc
+41°F to +95°F
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
S-Video
HDMI
2 Channel
Audio
Output
16.9 (W) x 8.1 (D) x 1.7 (H) inches
CD : 12Cm
(COMPACT DISC)
VCD : 12Cm
Video
Output
5.07 lbs
*Frequency Response
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
480p, 720p, 768p, 1080i
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with
out notice.
- Weight and dimensions are approximate.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-60
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
THIS SAMSUNG BRAND PRODUCT, AS SUPPLIED AND DISTRIBUTED BY SAMSUNG ELECTRONICS
AMERICA, INC. (SAMSUNG) AND DELIVERED NEW, IN THE ORIGINAL CARTON TO THE ORIGINAL
CONSUMER PURCHASER, IS WARRANTED BY SAMSUNG AGAINST MANUFACTURING DEFECTS IN
MATERIALS AND WORKMANSHIP FOR THE FOLLOWING LIMITED WARRANTY PERIOD:
One (1) Year Parts / Ninety (90) days Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and
used in the United States, and does not include transportation, installation, removal or reinstallation.
WARRANTY REPAIRS MUST BE PERFORMED BY SAMSUNG’S AUTHORIZED SERVICE CENTER. TO
RECEIVE WARRANTY SERVICE, THE ORIGINAL DATED BILL OF SALE MUST BE PRESENTED UPON
REQUEST AS PROOF OF PURCHASE TO SAMSUNG OR SAMSUNG’S AUTHORIZED SERVICE CENTER.
TRANSPORTATION TO AND FROM THE SERVICE CENTER IS THE RESPONSIBILITY OF THE
PURCHASER.
SAMSUNG WILL REPAIR OR REPLACE THIS PRODUCT, AT OUR OPTION AND AT NO CHARGE WITH
NEW OR RECONDITIONED PARTS, IF FOUND TO BE DEFECTIVE DURING THE LIMITED WARRANTY
PERIOD SPECIFIED ABOVE. The product must be returned during the warranty period with transportation
charges
prepaid to SAMSUNG’s designated service center. Prior to returning any product for warranty service, the
purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG DOES
NOT WARRANT UNINTERRUPTED OR ERROR-FREE OPERATION OF THE PRODUCT.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage
which occurs in shipment; applications and uses for which this product was not intended; failures or problems
which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect,
misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or
surges; damage caused by improper or faulty installation; improper connection with any peripheral; product
alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with
altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and
environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or
unauthorized parts, supplies, accessories or equipment which damage this product or result in service
problems; failures or problems due to incompatibility with other equipment.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
ENG-61
ELECTRONICS
HEADQUARTERS
105 Challenger Road
Ridgefield Park, NJ 07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsung.com
Downloaded From
US DvDPlayer-Manual.com Samsung Manuals
AK68-00846A-00

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement