Miele Conn@ctivity XKM 2000 KM Instruction manual

Fitting and installation instructions
Miele|home
Con|ctivity
XKM 2100 KM
en - GB
M.-Nr. 07 828 230
Contents
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the communication module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Con|ctivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
How the Con|ctivity system works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Establishing connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Con|ctivity and Miele|home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Miele|home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How the Miele|home system works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Miele|home system components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Miele|home First installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
a First installation of the InfoControl unit and signing on of the hob . . . . . . . . . . 17
b First installation of the SuperVision appliance and signing on of the hob . . . . 19
c First installation of the InfoControl unit and SuperVision appliance,
signing on of the hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Miele|home Installation at a later date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
f Signing on the hob to the InfoControl unit at a later date . . . . . . . . . . . . . . . . . 23
g Signing on the hob to the SuperVision appliance at a later date . . . . . . . . . . . 25
Signing off the hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Signing on/off KM 59** hobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2
Warning and safety instructions
This appliance complies with all
relevant legal safety requirements.
Improper use of the appliance can
present a risk of both personal injury
and material damage.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time.
They contain important notes on its
installation, safety, use and
maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
~ Before installation, check the
appliance for visible signs of damage.
Do not install and use a damaged
appliance. It could be dangerous.
~ Before connecting the appliance,
make sure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
~ The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and
where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
~ If the appliance is supplied without a
plug, or if the plug is removed, it must
be connected to the mains electricity
supply by a suitably qualified and
competent electrician in strict
accordance with current local and
national safety regulations. The
manufacturer cannot be held liable for
damage caused by incorrect
installation or connection.
~ Never open the casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
3
Warning and safety instructions
~ Installation, maintenance and
repairs may only be carried out by a
Miele authorised person in strict
accordance with current national and
local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
Ensure that current is not supplied to
the appliance until after maintenance or
repair work has been carried out.
~ Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~ During installation, maintenance and
repair work, the XKM 2100 KM and the
hob must be disconnected from the
mains electricity supply.
~ While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee is invalidated.
~ Do not connect the appliance to the
mains electricity supply by an extension
lead or a multi-socket unit. These do
not guarantee the required safety of the
appliance (e.g. danger of overheating).
4
~ This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless they
are supervised whilst using it, or have
been shown how to use it correctly by a
person responsible for their safety.
~ This appliance is not a toy! To avoid
the risk of injury, keep children well
away and do not let them play with it.
They should be supervised whenever
you are working in the kitchen.
Electrical connection
All electrical work should be carried
out by a suitably qualified and
competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK).
This appliance can be connected to the
mains electricity supply either via a
plug and switched socket or via a
suitable fused spur connection unit.
The socket and on-off switch should be
easily accessible after the appliance
has been built in.
Connection to a fused spur connection
unit must be carried out by a suitable
qualified electrician only.
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance must only be
operated when built-in. This is to
ensure that all electrical parts are
shielded. Live parts must not be
exposed.
Do not connect the appliance to the
mains electricity supply via an
extension lead. These do not
guarantee the required safety of the
appliance.
Total connected load
If the connection socket is not
accessible after installation (depending
on country) an additional means of
disconnection must be provided for all
poles. When switched off there must be
an all-pole contact gap of 3 mm in the
switch (including switch, fuses and
relays).
See data plate
See data plate for connection details.
Ensure that these match the mains
supply.
For extra safety it is advisable to install
a suitable residual current device with a
trip current of 30 mA.
Voltage and fuse rating
AC 230 V / 50 Hz
Fuse rating 10 A
Release Type B or C
Residual current device
5
Electrical connection
To change the mains connection
cable
If the connection cable is damaged, it
must be replaced by cable type H 05 V
V-F (pvc insulated), available from the
Miele Spare Parts Department.
If the appliance is connected via a
fused spur, the electrical cable must
only be replaced by a suitable qualified
electrician in accordance with local and
national safety regulations.
Connection data is quoted on the data
plate.
Important UK
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
WARNING
THIS APPLIANCE MUST BE
EARTHED
The earth lead must be connected
to the connection marked -.
6
Description of the appliance
Miele|home connection box
c
b
a
a Shaft with communication module fitted
b Data line
c Connection point for mains connection cable
1 connection cable with plug
1 connection cable with wire end ferrules
Accessories supplied:
Adapter
7
Connecting the communication module
Data line
The connection point for the data line is located underneath
the hob. The following illustrations are examples. The
connection position may vary.
Type 1
Type 2
Type 3
8
Connecting the communication module
,Data line types 1 and 2 must only be connected to the
appliance by a qualified and competent electrician in strict
accordance with current local and national safety
regulations (BS 7671 in the UK).
^ Disconnect the hob from the electricity supply.
^ Remove the cover from the data line connection point (see
illustration "Connecting the data line", Type 1 and Type 2).
^ Connect the data line.
Use the adapter supplied for connection types 1 and 2.
^ Replace the cover and secure with the screws (Type 1 and
Type 2 connections).
^ Connect the Miele|home connection box to the mains
supply.
,The Miele|home connection box must not be screwed
to the underside of the hob or to an oven or cooker!
9
Con|ctivity
How the Con|ctivity system works
Con|ctivity is the communication between the hob and the
cooker hood.
The operation of the cooker hood is automatically controlled
by the operating status of the hob.
For communication to take place, the cooker hood must be
fitted with communication module XKM 2000 DA a and the
hob must be fitted with communication module
XKM 2100 KM b.
The hob transmits information about its operating status to the
cooker hood via the household power supply (Powerline) c.
The XKM 2000 DA a is fitted inside the cooker hood and
will get its power supply from the cooker hood.
The XKM 2100 KM b has its own electrical connection to
the mains independent from the hob and needs to be
connected to the same ring main circuit that the cooker
hood is connected to for communication to take place.
10
Con|ctivity
Establishing connection
For communication to take place, the cooker hood and the
hob have to be signed on.
^ Sign on the cooker hood (see "Fitting and installation
instructions Con|ctivity XKM 2000 DA").
The process for signing on the cooker hood must be
completed before the hob can be signed on.
^ Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity /
Miele|home" section in the operating instruction manual for
your hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
11
Con|ctivity
Con|ctivity and Miele|home
To install Con|ctivity and Miele|home for the first time
^ Select the correct installation option (see chart in
"Miele|home / Installation options"). Carry out the first
installation without signing on the cooker hood and the
hob.
^ Sign on the cooker hood as an "Installation at a later date"
appliance.
^ Sign on the hob as an "Installation at a later date" appliance
(see chart in "Miele|home / Installation options").
To integrate Con|ctivity into an existing Miele|home system
^ Sign on the cooker hood.
^ Sign on the hob as an "Installation at a later date" appliance
(see chart in "Miele|home / Installation options").
12
Miele|home
How the Miele|home system works
Communication enabled appliances use the existing household power supply
(Powerline communications) to transfer data to Miele|home master appliances
(e.g. the InfoControl unit, the SuperVision appliance). You can use the master
appliance to call up information about communication enabled appliances, such
as programme status or fault messages at any time.
Miele|home system components
a Communication module
b Communication enabled appliances (examples)
c 230 volt power supply (Powerline)
d SuperVision appliance, e.g. an oven used as a static master appliance
e InfoControl unit (base station and mobile receiver) as a mobile master
appliance
13
Miele|home
Components
Description
Communication module
– XKM 2000 SV
This networks the master appliance with the
communication enabled appliances and enables
appliance data to be transferred through the
household power supply.
– XKM 2000 KF
– XKM 2100 KM
– XKM 2000
Communication enabled Information about this appliance can be called up
appliance
and data can also be recevied.
Data is relayed through the household 230 volt
power supply and received by a master appliance
or transmitted by a master appliance.
Receives and displays data from up to 11 signed on
appliances.
The display can show information such as
programme duration and status, fault messages or
Pyrolytic ovens
operating tips for the following communication
Microwave combi ovens enabled appliances: washing machines, tumble
dryers, dishwashers, fridges, freezers,
Dishwashers
fridge/freezers. A wine storage unit will be shown as
Steam ovens
a fridge.
Sets the time for the Miele|home system.
Combi steam ovens
SuperVision appliance
(master appliance)
– Ovens
–
–
–
–
–
InfoControl
(master appliance)
– XIC 2100
– XIC 2000
14
Receives and displays data from up to 8 signed on
appliances.
The display can display information such as
programme duration and status, fault messages or
operating tips for the communication enabled
appliances.
Sets the time for the Miele|home system.
Miele|home
Installation instructions and conditions required
– A communication module must be fitted to each communication enabled
appliance.
– The appliance must be fitted with a communication module.
– Appliances only need to be signed on to the Miele|home system once.
– Appliances can be signed on during the First installation of the Miele|home
system.
– Appliances can be signed on at a later date to the master appliance, e.g.
SuperVision appliance or InfoControl unit of an existing Miele|home system.
– The appliances remain signed on even if they are switched off.
– The SuperVision appliance must be fitted with Communication module XKM
2000 SV.
– The First installation of the Miele|home system only needs to be carried out
once.
– The appliances remain signed on even if the SuperVision appliance is
switched off.
– The First installation of the Miele|home system only needs to be carried out
once.
– The appliances remain signed on even if the InfoControl unit is switched off.
– Information on a communication enabled hob can only be displayed on the
InfoControl XIC 2100.
15
Miele|home
Installation options
Please make sure you know how to use your Miele|home enabled appliances
and the InfoControl unit (if present) before you start.
Please read the operating instructions supplied.
Please also observe the Warning and Safety instructions contained in the
operating instructions.
The Communication module must be fitted to the Miele|home enabled
appliances.
Please read these installation instructions carefully and keep them in a safe
place for reference.
Select the correct installation option:
First installation
Installation at a later date
You have not yet installed the
Miele|home system into your home
and would like to connect it to the
household power lines for the first
time and also sign on
communication enabled appliances
to the system:
You have already installed the
Miele|home system into your home
and would now like to sign on a
communication enabled appliance.
a First installation of the InfoControl
unit and signing on of the hob
d
Does not apply to this appliance
b First installation of the SuperVision
appliance and signing on of the
hob
e
Does not apply to this appliance
c First installation of the InfoControl
unit, SuperVision appliance and
signing on of the hob
f
Signing on the hob to the
InfoControl unit at a later date
g
Signing on the hob to the
SuperVision appliance at a later
date
16
Miele|home First installation
a First installation of the InfoControl unit and signing on of the
hob
Switch the InfoControl unit on, select a language and set
the time and the date (see the operating instructions
supplied with the InfoControl unit).
First installation
Mieleqhome
First installation
Yes
No
^ Select "Yes" by pressing the # button on the base station.
Activation can take up to 2 minutes:
Mieleqhome
activating
Mieleqhome
~
activation
Please wait
complete
O O O F F F F F FM
O O O O O O O O O
Press the
!
OK button
^ Select that installation has been successful by pressing the
# button on the base station.
If acitvation is not successful, repeat the procedure. If this
does not solve the problem, call the Miele Service
Department.
Signing on the hob
Start sign
on process
Yes
No
^ Select "Yes" by pressing the # button on the base station.
17
Miele|home First installation
Mieleqhome
Start signing on
appliances
Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity / Miele|home"
section in the operating instruction manual for your hob.
During the signing on process, you will be asked to confirm
the following on the InfoControl unit:
After signing on
all appliances
Press the
OK button
^ Press the # button on the InfoControl unit.
The InfoControl will register all the appliances being received
one after the other:
Signing on
Please wait
O O O F F F F F FM
If signing on is successful, the InfoControl display will show:
Sign on to
Hob
successful
O O O O O O O O O
Back A
~
Searching
appliances
Appl. search
H
^ Select "Back" by pressing the # button.
If you do not press the "#" button to confirm, the display will
go out after 10 minutes.
^ Confirm the signing on process on the hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
18
Miele|home First installation
b First installation of the SuperVision appliance and signing on
of the hob
Before you can sign on the hob you will need to install the
SuperVision appliance and start the signing on process
(see the installation instructions for Miele|home).
^ Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity /
Miele|home" section in the operating instruction manual for
your hob.
During the hob signing on process, you will be asked to
confirm the following on the SuperVision appliance:
Mieleqhome SuperVision
After starting to sign all
appliances on press the OK button
^ Confirm with "OK".
The SuperVision appliance will register all the appliances
being received one after the other:
Mieleqhome SuperVision
Signing on. Please wait
O O O O F F F F F F F F FM
19
Miele|home First installation
If signing on is successful, the SuperVision appliance
display will show:
Mieleqhome SuperVision
Sign on successful
^ Confirm that signing on has been successful with "OK".
^ Confirm the signing on process on the hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
20
Miele|home First installation
c First installation of the InfoControl unit and SuperVision
appliance, signing on of the hob
Before you can sign on the hob you will need to switch on
the SuperVision appliance and the InfoControl unit. Install
Miele|home on the Info-Control unit (see the installation
instructions for Miele|home).
Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity / Miele|home"
section in the operating instruction manual for your hob.
^ Now sign on the SuperVision appliance.
Mieleqhome Installation
° Install SuperVision for the first time
°
Sign SuperVision on to Mieleqhome
° Sign appliance without SuperVision on
^ Select the "Sign SuperVision on to Miele|home" option
from the "Settings - Miele|home" menu.
Mieleqhome SuperVison
Sign SuperVision on?
^ Confirm with "OK".
During the signing on processes, you will be asked to confirm
the following on the InfoControl unit:
After signing on
all appliances
press the
OK button
^ Press the # button on the InfoControl unit.
21
Miele|home First installation
All appliances received will be registered:
– InfoControl display:
Signing on
Please wait
O O O F F F F F FM
– SuperVision appliance display:
Mieleqhome SuperVision
Signing on. Please wait
O O O O F F F F F F F F FM
If signing on is successful,
– the SuperVision appliance display will show:
Mieleqhome SuperVision
Sign on successful
^ Confirm with "OK".
– the InfoControl display will show:
Sign on to
Hob
successful
O O O O O O O O O
Back A
~
Searching
appliances
Appl. search
H
^ Select "Back" by pressing the # button.
If you do not press the "#" button to confirm, the display will
go out after 10 minutes.
^ Confirm the signing on process on the hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
22
Miele|home Installation at a later date
f Signing on the hob to the InfoControl unit at a later date
^ Press the 0 button on the mobile receiver to switch it on.
^ Press the # button on the base station for longer. The
Menu will then open:
Language F
Time ...
Searching
Buzzer
H
^ Select "Appliances" with the ) button and confirm your
selection by pressing the # button.
Back A
Sign on
appliances
Appl. search
H
^ Select "Sign on appliances" with the ) button and confirm
your selection by pressing the # button.
Mieleqhome
Start signing on
appliances
^ Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity /
Miele|home" section in the operating instruction manual for
your hob.
During the hob signing on process, you will be asked to
confirm the following on the InfoControl unit:
After signing on
all appliances
Press the
OK button
^ Confirm with "OK".
23
Miele|home Installation at a later date
The InfoControl unit will register the appliance:
Signing on
Please wait
O O O F F F F F FM
If signing on is successful, the InfoControl display will show:
Sign on to
Hob
successful
O O O O O O O O O
Back A
~
Searching
appliances
Appl. search
H
^ Select "Back" by pressing the # button.
If you do not press the "#" button to confirm, the display will
go out after 10 minutes.
^ Confirm the signing on process on the hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
24
Miele|home Installation at a later date
g Signing on the hob to the SuperVision appliance at a later
date
^ Start the signing on process on the SuperVision appliance
(see the installation instructions for Miele|home).
^ Start the signing on process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity /
Miele|home" section in the operating instruction manual for
your hob.
During the hob signing on process, you will be asked to
confirm the following on the SuperVision appliance:
Mieleqhome SuperVision
After starting to sign all
appliances on press the OK button
^ Confirm with "OK".
The SuperVision appliance will register the hob:
Mieleqhome SuperVision
Signing on. Please wait
O O O O F F F F F F F F FM
If signing on is successful, the SuperVision appliance
display will show:
Mieleqhome SuperVision
Sign on successful
^ Confirm that signing on has been successful with "OK".
^ Confirm the signing on process on the hob.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
25
Signing off the hob
The signing off process must be carried out on the
Miele|home master appliance and on the hob.
Signing off
^ Switch on the Miele|home master appliance and start the
signing off process (see the operating instructions for the
relevant appliance).
^ Carry out the signing off process on the hob.
Induction hob KM 59**: see "KM 59**"
All other hobs: please refer to the "Con|ctivity /
Miele|home" section in the operating instruction manual for
your hob.
^ Confirm the signing off process on the Miele|home master
appliance (see the operating instructions for the
appropriate appliance).
26
Signing on/off KM 59** hobs
Signing on
^ With the hob switched off, touch the hob ON/OFF sensor s
and the safety lock sensor $ at the same time until the
indicator for the safety lock flashes.
After the programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
^ On hobs with 4 or more cooking zones touch the front left
+ sensor and on hobs with 3 cooking zones touch the left
+ sensor until the following shows in the display
- 0. (hobs with 9[17] power levels) or
- 10 (hobs with 12[23] power levels).
^ On hobs with 4 or more cooking zones touch the front
right + sensor and on hobs with 3 cooking zones touch
the rear right + sensor until a 2 appears in the display.
The signing on process will start and a "rotating" § will appear
in the display. The signing on process will take a few minutes.
As soon as it has been completed successfully, the Status 2
will appear in the display.
^ Touch the hob ON/OFF sensor s until the displays go out
to save the setting.
If the signing on process is unsuccessful, repeat the
procedure. If this does not solve the problem, call the Miele
Service Department.
27
Signing on/off KM 59** hobs
Signing off
^ With the hob switched off, touch the hob ON/OFF sensor s
and the safety lock sensor $ at the same time until the
indicator for the safety lock flashes.
After the programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
^ On hobs with 4 or more cooking zones touch the front left
+ sensor and on hobs with 3 cooking zones touch the left
+ sensor until the following shows in the display
- 0. (hobs with 9[17] power levels) or
- 10 (hobs with 12[23] power levels).
^ On hobs with 4 or more cooking zones touch the front
right + sensor and on hobs with 3 cooking zones touch
the rear right + sensor until a 1 appears in the display.
The signing off process will start and a rotating § will appear
in the display. The signing off process will take a few minutes.
As soon as it has been completed successfully, the Status 1
will appear in the display.
^ Touch the hob ON/OFF sensor s until the displays go out
to save the setting.
28
Problem solving guide
The hob can only be signed on when the communication module is in the correct
position.
If the signing on process is unsuccessful, check first of all that the communication
module is fitted correctly. If necessary, push the module into the slot until it clicks
into position and then repeat the signing on procedure.
Messages in the InfoControl mobile receiver display
Message
Cause
Remedy
Activation failed.
There was a problem during
activation.
^ Repeat the First installation
of the InfoControl unit.
Sign on failed.
The signing on procedure was ^ Repeat the signing on
procedure on the
not started on the hob.
InfoControl unit and on the
hob, see "Signing on the
hob to the InfoControl unit at
a later date".
There was a problem during
activation.
^ Repeat the signing on
procedure.
Other problems
Problem
Cause
Remedy
The hob does not
appear in the list of
signed on appliances.
The signing on procedure ^ Repeat the signing on
procedure on the master
has not been carried out on
appliance and on the
the hob.
hob.
There was a problem with
installing the SuperVision /
InfoControl master
appliance at a later date.
^ Select the "Search for
appliances" function on
the master appliance.
The hob is not suitable for
displaying on the
SuperVision appliance or
the InfoControl unit.
^ Refer to the chart in
"Miele|home".
29
Problem solving guide
Problem
Cause
The signing on
The appliance signing on
procedure on the hob procedure has not been
has been unsuccessful. started on the master
appliance.
Remedy
^ Repeat the signing on
procedure on the master
appliance and on the
hob.
There was a problem
during the signing on
procedure.
^ Repeat the signing on
procedure.
The signing off of the
There was a problem
hob was successful but during the signing off
the hob still appears in procedure.
the list of signed on
appliances.
^ Repeat the signing off
procedure on the hob.
The signing off on the The signing off procedure ^ Carry out the signing off
procedure on the hob as
master appliance was has not been carried out on
well.
successful but the hob the hob.
still appears in the list
of signed on
appliances.
The signing off
There was a problem
procedure on the hob during the signing off
has been unsuccessful. procedure.
^ Repeat the signing off
procedure on the hob.
You cannot resolve the problem.
Please contact your Miele Dealer or the Miele Service Department.
30
31
Alteration rights reserved / 3212
M.-Nr. 07 828 230 / 01