USER’S GUIDE
English
ES
Safety Precautions
Before trying to use the piano, be sure to read the
separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de leer las
“Precauciones de seguridad” separadas.
CDP200RES1C
Español
Please keep all information for future reference.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that
purpose, locate the apparatus in a way that secures easy access to the power cord.
Declaration of Conformity
Model Number: CDP-200R
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Important!
• Before using the AD-12 Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully check the
power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously
damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-12 adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Bornbarch 10, 22848 Norderstedt, Germany
● Company and product names used in this manual may be registered trademarks of others.
● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
E-1
English
Please note the following important information before using this product.
Contents
General Guide ............................. E-4
Using the 10-key Pad (cl) .................................E-6
FUNCTION Button (7) Functions .....................E-6
Getting Ready to Play ................ E-7
Preparing the Music Stand .................................E-7
Connecting a Pedal Unit.....................................E-7
Power Supply .....................................................E-7
Playing the Digital Piano............ E-8
Turning on Power and Playing ...........................E-8
Using Headphones .............................................E-8
Changing Keyboard Response to
Touch Pressure (Touch Response)....................E-9
Adjusting Display Contrast .................................E-9
Using the Metronome .......................................E-10
Controlling the
Keyboard Sounds..................... E-11
Select from a variety of musical
instrument sounds ............................................E-11
Layering Two Tones .........................................E-12
Splitting the Keyboard between Two
Different Tones .................................................E-12
Using Reverb....................................................E-13
Using Chorus....................................................E-13
Using a Pedal ...................................................E-14
Changing the Pitch
(Transpose, Tuning, Octave Shift)....................E-14
Using the Pitch Bend Wheel to
Shift the Pitch of Notes .....................................E-15
Sampling Sounds and Playing
Them on the Digital Piano ....... E-16
Connection and Preparation.............................E-16
Sampling and Playing a Melody Sound
(Melody Sampling) ...........................................E-17
Incorporating a Sampled Sound into a
Drum Set (Drum Sampling) ..............................E-19
Other Sampling Functions ................................E-22
Using Built-in Songs to
Master Keyboard Play .............. E-28
Phrases............................................................ E-28
Step Up Lesson Flow....................................... E-28
Selecting the Song, Phrase, and
Part You Want to Practice................................ E-29
Lessons 1, 2, and 3.......................................... E-30
Lesson Settings ............................................... E-31
Using Auto Step Up Lesson............................. E-33
Music Challenge
Keyboard Game ........................ E-34
Using Auto Accompaniment.... E-35
Playing the Rhythm Part Only .......................... E-35
Playing All Parts ............................................... E-36
Using Auto Accompaniment Effectively ........... E-38
Using One-Touch Preset ................................. E-39
Using Auto Harmonize ..................................... E-40
Editing Auto Accompaniment
Patterns...................................... E-41
Saving Keyboard Setups to
Registration Memory ................ E-44
To save a setup to registration memory........... E-45
To recall a setup from registration memory ..... E-45
Recording Your
Keyboard Play ........................... E-46
Recording and Playing Back Keyboard Play ... E-46
Using Tracks to Record and Mix Parts ............ E-47
Recording Two or More Songs, and
Selecting One for Playback.............................. E-48
Recording while Playing Along with a
Built-in Song..................................................... E-49
Saving Recorded Data on an
External Device................................................ E-50
Playing Built-in Songs ............. E-24
Playing the Demo Songs ..................................E-24
Playing Back a Particular Song ........................E-25
Increasing the Selection of Songs ....................E-27
E-2
B
Contents
English
Other Useful Digital Piano
Functions .................................. E-51
Changing the Scale of the Keyboard................E-51
Using Music Preset ..........................................E-53
Using the Arpeggiator.......................................E-54
Deleting User Song Data..................................E-55
Deleting All Data in Digital Piano Memory........E-55
Using a Memory Card............... E-56
SD Memory Card and Card Slot Precautions...E-56
Inserting and Removing an
SD Memory Card..............................................E-57
Formatting an SD Memory Card.......................E-57
Saving Digital Piano Data to an
SD Memory Card..............................................E-58
Loading Data from an SD Memory Card
into Digital Piano Memory.................................E-59
Deleting Data from an SD Memory Card..........E-60
Playing Back Data from an
SD Memory Card..............................................E-61
SD Memory Card Error Messages ...................E-61
Connecting External Devices..... E-62
Connecting a Computer ...................................E-62
MIDI Settings ....................................................E-63
Storing and Loading Piano Memory Data.........E-65
Connecting to Audio Equipment .......................E-66
Reference .................................. E-67
Troubleshooting................................................E-67
Specifications ...................................................E-69
Operating Precautions......................................E-70
Error Messages ................................................E-71
Song List ..........................................................E-72
Chord Chart ......................................................E-73
MIDI Implementation Chart
Included Accessories
Separately Available Accessories
● Music Stand
● Song Book
● Leaflets
• Safety Precautions
• Appendix
• Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
• You can get information about accessories that
are separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/
E-3
General Guide
• In this manual, buttons and other controllers are identified using the numbers shown below.
1
2
bk bl bm bn
3
456
bo bp
789
bq
br bs
bt ck
cl
cm cn co cp cq cr
dl
dn
E-4
do
cs ct dk
dm
dp
dl
dq
General Guide
1 POWER button ☞E-8
2 MAIN VOLUME knob ☞E-8
3 MIC VOLUME knob ☞E-16
4 RHYTHM EDITOR button ☞E-41, 42
5 SCALE EDITOR button ☞E-51, 52, 53
6 SAMPLING button ☞E-17, 18, 19, 21, 57
7 FUNCTION button ☞E-6
8 RECORDER button ☞E-46, 47, 48, 49
9 METRONOME, BEAT button ☞E-10
bk INTRO, REPEAT button ☞E-26, 31, 38, 41
bl NORMAL/FILL-IN, REW button
bt TONE, MUSIC PRESET button
ck CARD, SAVE/LOAD button ☞E-57, 58, 59, 60, 61
cl Number buttons, [–]/[+] buttons ☞E-6
cm BANK, LISTEN, CHORD/TR1 button
☞E-18, 30, 44, 45
cn Area1, WATCH, TR2 button
☞E-18, 30, 44, 45, 48, 53
co Area2, REMEMBER, TR3 button
☞E-18, 31, 44, 45, 48, 53
cp Area3, NEXT, TR4 button ☞E-18, 29, 44, 45, 48, 53
cq Area4, AUTO, TR5 button ☞E-18, 33, 44, 45, 48, 53
cr STORE, MUSIC CHALLENGE, TR6 button
☞E-25, 29, 35, 38, 41
☞E-18, 34, 45, 48, 53
bm VARIATION/FILL-IN, FF button
cs SPLIT button ☞E-12, 13
ct LAYER button ☞E-12, 15
dk AUTO HARMONIZE/ARPEGGIATOR, TYPE button
☞E-25, 29, 38, 41
bn SYNCHRO/ENDING, PAUSE button
☞E-25, 38, 39, 41
☞E-40, 54
bo START/STOP, PLAY/STOP button
☞E-24, 25, 27, 30, 31, 35, 46, 48, 49, 61
bp ACCOMP ON/OFF, CHORDS, PART SELECT
button ☞E-24, 27, 29, 31, 36, 40, 41, 42, 49, 64
bq TEMPO buttons ☞E-10, 26, 39
br SONG BANK button ☞E-25, 26, 29, 49
bs RHYTHM, ONE TOUCH PRESET button
☞E-11, 19, 21, 35, 39, 42, 45, 46, 48, 51, 53
■ Front
dl Speakers
dm Display
dn PITCH BEND wheel ☞E-15
do CHORD root names ☞E-36
dp Percussion instrument list ☞E-11
dq SD CARD SLOT ☞E-57
■ Back
dt
ek el
em
ds
dr
dr PHONES/OUTPUT jack
☞E-8, 66
C
ds USB port ☞E-62
dt DC 12V terminal ☞E-7
ek AUDIO IN jack ☞E-16, 66
el MIC IN jack ☞E-16
em SUSTAIN/ASSIGNABLE JACK
☞E-7
E-5
English
☞E-11, 17, 19, 21, 23, 53
General Guide
Using the 10-key Pad (cl)
Use the number buttons and the [–] and [+] buttons to change
the settings of the parameters that appear in the upper left
area of the display.
Function
Number Buttons
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 001, input 0 3 0 3 1.
• Negative values cannot be input using the number buttons.
Use [–] (decrease) and [+] (increase) instead.
[–] and [+] Buttons
You can use the [–] (decrease) and [+] (increase) buttons to
change the displayed number or value.
• Holding down either button scrolls the displayed setting.
• Pressing both buttons at the same time will revert to the
initial default setting or the recommended setting.
FUNCTION Button (7) Functions
You can use the FUNCTION button (7) to adjust the reverb
effect, to delete data, and to perform a wide range of other
Digital Piano operations.
To select a function
1. Press 7 to display the function menu.
2. Use the cl (10-key) [4] (u) and [6] (i) keys to
display the function you want.
• You can exit the function menu by pressing 7.
• After selecting functions 8 through 12, press the cl
(10-key) [7] (ENTER) key to display the menu item’s
submenu. Then use [4] (u) and [6] (i) to select an
item. You can exit a submenu by pressing the cl
(10-key) [9] (EXIT) key.
3. Refer to the indicated pages for details about
each function.
E-6
See
Page
1
Transpose
Trans.
2
Accompaniment Volume
AcompVol
E-39
3
Song Volume
Song Vol
E-26
4
Touch Response
Touch
E-9
5
Tuning
Tune
E-14
6
Reverb
Reverb
E-13
7
Chorus
Chorus
E-13
8
Sampling
SAMPLING
Automatic Sampling Start
AutoStrt
E-22
Automatic Sampling Stop
AutoStop
E-22
Sampled Tone Protect
(Protect)
E-23
Step Up Lesson
LESSON
Setting
S t .GrPno
Display
9
E-14
Voice Fingering Guide
Speak
E-31
Note Guide
NoteGuid
E-32
Performance Evaluation
Scoring
E-32
Phrase Length
PhraseLn
E-32
10 Other Settings
OTHER
Arpeggiator Hold
ArpegHld
E-54
Pedal Effect
Jack
E-14
Pitch Bend Range
Bend Rng
E-15
Accompaniment Scale
AcompScl
E-53
Contrast
E-9
LCD Contrast
11 MIDI Settings
MIDI
Keyboard Channel
Keybd Ch
E-63
Navigate Channels
Navi. Ch
E-63
Local Control
Local
E-64
Accomp Out
AcompOut
E-64
12 Delete
DELETE
Sampled Sound Delete
(tone name)
User Rhythm Delete
(rhythm name) E-43
E-23
User Song Delete
(song name)
E-55
All Data Delete
All Data
E-55
• The tone and other parameters revert to their initial
defaults whenever you turn on power (page E-8).
English
Getting Ready to Play
Preparing the Music Stand
Music stand
Connecting a Pedal Unit
Connect an optional pedal unit.
SUSTAIN/ASSIGNABLE JACK
Power Supply
Use only the AC adaptor that is specified for use with this
Digital Piano.
Specified AC Adaptor: AD-12
Using the AC Adaptor
DC 12V terminal
AD-12
Household power outlet
• Be sure to turn off Digital Piano power before
connecting or disconnecting the AC adaptor.
E-7
Playing the Digital Piano
1
2
7
9
cl
bq
Turning on Power and Playing
1. Press 1.
This turns on power.
2. Try playing something on the keyboard. Use 2
to adjust volume.
Using Headphones
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
PHONES/OUTPUT jack
Decrease
Increase
• Turning off the piano causes most current settings to
be cleared. The piano will revert to initial settings the
next time you turn it on.
• This is true for all settings except for sample sound
protection. Once you turn it on it remains on until you
turn it off again.
E-8
• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page E-3 for
information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
Playing the Digital Piano
Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of the
same expressivity you get on an acoustic piano.
Changing Touch Response Sensitivity
Use the procedure below to control how much the volume of
played notes change in accordance with playing speed.
Select the setting that best matches your playing style.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “Touch” (page
E-6).
Keyboard Instrument Sound Intensity
Touch
■ Sound intensity depends on the speed that keys
are pressed.
People normally believe that the stronger the pressure applied
to a piano keyboard, the louder the sound. Actually, however,
the intensity of the notes played depends on the speed at
which keys are pressed. Notes are louder when keys are
pressed quickly, and quieter when keys are pressed slowly.
Keeping this in mind as you play a keyboard musical
instrument lets you control note volume without striving to
apply too much pressure with your fingertips.
2. Use cl (10-key) [–] and [+] keys to select one of
the four Touch Response sensitivity settings.
Off (oFF)
Touch Response is turned off. Sound
volume is fixed, regardless of key press
speed.
Type 1 (1)
Normal Touch Response
■ The playability of an acoustic piano
Type 2 (2)
More sensitive Touch Response than Type 1
Your Digital Piano provides you with key touch that is the next
best thing to an acoustic piano. Note volume changes
automatically in accordance with key press speed.
Type 3 (3)
Less sensitive Touch Response than Type 1
Indicator disappears when
Touch Response is turned off.
Pressing fast produces
louder notes.
Adjusting Display Contrast
1. Press 7 and then use the cl (10-key) [4] (u)
Pressing slowly produces
softer notes.
and [6] (i) keys to display “OTHER” (page
E-6).
Flashes
OTHER
Do not try to use too much
pressure.
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “Contrast”.
Con t r as t
4. Use the cl (10-key) [–] and [+] keys to adjust the
contrast.
• The contrast setting range is 01 to 17.
B
E-9
English
Changing Keyboard Response to
Touch Pressure
(Touch Response)
Playing the Digital Piano
Using the Metronome
The metronome lets you play and practice along with a steady
beat to help keep you on tempo.
Changing the Metronome Tempo
Use the following procedure to change the tempo of the
metronome.
1. Press bq.
Start/Stop
1. Press 9.
This starts the metronome.
This pattern changes with each beat.
2. Press 9 again to stop the metronome.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing q and w at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
• Pressing bq causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
cl (10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
• The tempo value will stop flashing if you do not perform
any operation for a short while.
Changing the Beats Per Measure
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
• You can specify 0, or a value from 2 to 6 as the number of
beat per measure.
• When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.
1. Hold down 9 until the beats per measure
setting screen appears on the display.
Bea t
• If you do not perform any operation for a few seconds
after the beats per measure setting screen appears, the
display will return to the screen displayed before you
pressed 9.
2. Use cl (10-key) to enter the number of beats
per measure.
• The bell will not sound if you specify 0 for this setting. In
this case, all beats are indicated by a click sound. This
setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.
E-10
Tempo value (flashes)
Changing the Metronome Sound Volume
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
• For information about changing the Auto Accompaniment
volume, see page E-39.
• For information about changing the song volume, see page
E-26.
• You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.
7
bs
bt
English
Controlling the Keyboard Sounds
cl
csct
cs
ct
Select from a variety of musical
instrument sounds
3. Try playing something on the keyboard.
The tone of the instrument you selected will sound.
Your Digital Piano lets you select tones for a wide variety of
musical instrument sounds, including violin, flute, orchestra,
and more. Even the same song sound takes on a different feel
by changing the instrument type.
To select an instrument for playing
1. Press bt.
Tone number
Tone name
S t .GrPno
2. Use cl (10-key) to select the tone number you
want.
The corresponding tone number and tone name will
appear on the screen.
• See the separate “Appendix” for a complete list of available
tones.
• Use the number buttons to enter the tone number. Specify
three digits for the tone number.
Example: To select 001, enter 0 3 0 3 1.
• When one of the drum sets is selected (tone numbers 654
through 670), each keyboard key is assigned a different
percussion sound.
Playing with a Piano Tone (Piano Setup)
1. Press bs and bt at the same time.
This selects the grand piano tone.
Settings
Tone Number
Reverb
Transpose
Touch Response
: “001”
: “06”
: 00
: Off: Returns to initial default
On: No change
Pedal Effect
: SUS
Rhythm Number
: “181”
Accompaniment
: Rhythm part only
Local Control
: On
Drum Assign
: Off
Split
: Off
Layer
: Off
Chorus
: Off
Octave Shift (Upper) : 0
Auto Harmonize
: Off
Arppegiator
: Off
Scale
: Equal
E-11
Controlling the Keyboard Sounds
Layering Two Tones
You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1. Select the first tone you want to use.
Press bt and then use cl (10-key) to select the tone you
want.
Example: 026 ELEC.PIANO 1
E.Pi ano1
Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.
To select the two tones for a split keyboard
1. Select the tone for the right side range (page
E-11).
Press bt and then use cl (10-key) to select the tone you
want.
Example: 335 FLUTE 1
2. Press ct.
F l u t e 1
2. Press cs.
Lights
3. Use cl (10-key) to select the second tone you
want.
Example: 212 STRINGS
Lights
St r i n
g
s
3. Use cl (10-key) to select the left side range tone
you want.
Example: 056 VIBRAPHONE 1
4. Play something on the keyboard.
Vi bes
Both tones sound at the same time.
5. Pressing ct again to unlayer the keyboard (so it
plays only the tone you selected in step 1).
• Each press of ct toggles between layered (two tones)
and unlayered (one tone).
4. Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
FLUTE 1
Split point
Disappears
F3
E-12
1
Controlling the Keyboard Sounds
plays only the tone you selected in step 1).
• Each press of cs toggles between split (two tones) and
unsplit (one tone).
Using Reverb
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “Reverb” (page
E-6).
Reve r b
Disappears
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
To change the split point
1. While holding down cs, press the keyboard key
2. Use the cl (10-key) [–] and [+] keys to select the
reverb setting you want.
Off (oFF)
Turns off reverb.
1 to 10
The larger the number selected, the longer
the reverb duration.
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name
C 4
Reve r b
Indicator disappears when reverb is turned off.
Using Chorus
Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “Chorus” (page
E-6).
Cho r us
2. Use the cl (10-key) [–] and [+] keys to select the
chorus type you want.
There are five chorus types, plus an off setting.
Cho r us
Indicator disappears when chorus is turned off.
• The actual effect produced by chorus depends on the tone
you are using.
E-13
English
5. Pressing cs again to unsplit the keyboard (so it
Controlling the Keyboard Sounds
Using a Pedal
A pedal can be used to change notes in various ways while
playing.
Selecting the Pedal Effect
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “OTHER” (page
E-6).
Changing the Pitch
(Transpose, Tuning, Octave Shift)
Changing the Pitch in Semitone Steps
(Transpose)
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
Flashes
1. Press 7.
OTHER
Trans .
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “Jack”.
Jack
4. Use the cl (10-key) [–] and [+] keys to select the
pedal effect you want.
• The following shows the available pedal effects.
Sustain
(SUS)
Sustains notes played while the pedal is
depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.
Sostenuto
(SoS)
Sustains notes that are playing when the
pedal is depressed before the keyboard
keys are released.
Soft
(SFt)
Slightly softens notes played while the pedal
is depressed.
Rhythm
(rHy)
Pressing the pedal starts and stops Auto
Accompaniment or song playback.
E-14
2. Use the cl (10-key) [–] and [+] keys to select the
transpose setting you want.
Fine Tuning (Tuning)
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• The tuning setting range is –99 to +99 cents.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “Tune” (page
E-6).
Tune
2. Use the cl (10-key) [–] and [+] keys to adjust the
tuning.
Octave Shift
Octave Shift lets you raise or lower the pitch of the keyboard
notes in octave units.
• The octave shift setting range is –2 to +2 octaves.
• When using Split (page E-12), you can individually set the
left and right keyboard ranges to the pitches you want.
1. Keep pressing ct until the screen shown below
Using the Pitch Bend Wheel to
Shift the Pitch of Notes
You can use the pitch bend wheel to slide the pitch of notes
smoothly upwards and downwards. This technique makes it
possible to produce effects that are similar to sounds
produced when bending notes on a saxophone or electric
guitar.
appears on the display.
If you want to use Split, turn on Split before pressing ct.
• If you do not perform any operation for a few seconds
after this screen appears, the display will return to the
previous screen automatically.
Oc t Uppe r
2. Use the cl (10-key) [–] and [+] keys to shift the
To play with the pitch bend wheel
1. While playing a note on the
keyboard, rotate the pitch bend
wheel on the left of the keyboard
upwards or downwards.
The amount the note bends depends on how
much you rotate the pitch bend wheel.
• Do not have the pitch bend wheel rotated
as you turn on the piano.
octave.
• Split On : This step affects the right side keyboard
range only.
• Split Off : This step affects the entire keyboard range.
3. Press ct.
• Split On : The screen shown below will appear. Use the
cl (10-key) [–] and [+] keys to shift the
octave for the left side keyboard range.
• Split Off : The screen shown below will appear.
Advance to step 4.
Specifying the Pitch Bend Range
Use the following procedure to specify how much the pitch of
the note changes whenever the pitch bend wheel is rotated
upwards or downwards. You can specify a range from 0 to 12
semitones (one octave).
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “OTHER” (page
E-6).
Flashes
Oc t Lowe r
OTHER
4. Press ct again.
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “Bend Rng”.
Bend Rn
g
4. Use the cl (10-key) [–] and [+] keys to change
the range.
E-15
English
Controlling the Keyboard Sounds
Sampling Sounds and Playing Them on the Digital
Piano
3
6 7
bs
bt
cl
cmcn
cm
cnco
cocp
cpcq
cqcr
cr
You can sample a sound from a microphone, a portable audio
player, or other device, and then play the sound on the Digital
Piano’s keyboard. For example, you could sample the bark of
your dog and then use the sound in a melody. You also can
sample and use passages from a CD. The sampling feature is
a great way to create new sounds that are highly creative.
Connection and Preparation
• Before connecting, make sure that the Digital Piano,
external devices, and/or the microphone all are turned
off.
1. Connect a microphone or external device to the
Digital Piano.
MIC IN jack
Digital Piano AUDIO IN jack
CD player, Cassette player,
etc.
Stereo mini plug
• You also could connect a commercially available
microphone.
• Connection of an external device requires commercially
available connecting cords, supplied by you. Connecting
cords should have a stereo mini plug on one end and a plug
that matches the configuration of the external device on the
other end.
E-16
2. Turn down the volume levels of the external
device and the Digital Piano.
3. Turn on the external device or microphone, and
then turn on the Digital Piano.
• When using a microphone, adjust the input volume
level with 3.
• It will take a few seconds after you turn on the Digital Piano
before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
■ Cutting off power clears sampled data!
If you disconnect the AC adaptor, currently stored sampled
data will be deleted.
Sampling Sounds and Playing Them on the Digital Piano
Use the procedures in this section to sample a sound and play
it as the melody part on the Digital Piano.
• Up to five sampled sounds can be stored in Digital Piano
memory as tone numbers 671 through 675. Simply select
the tone number where the sound you want is located to
assign the sound to the keyboard.
3. Output the sound from the external device. In
the case of a microphone, output the sound in
the direction of the microphone.
Sampling will start automatically.
Samp l i n
g
Lights
To sample a sound
1. Press bt and then use cl (10-key) to enter the
tone number (671 to 675) where you want to
store the sampled sound.
No sampled sound stored
No Da t a
4. After the sound you want to sample is finished,
press 6.
Sampling will stop when you release 6.
• Even if you do not press 6, sampling will stop
automatically whenever there is no more sound being
input from the external device or microphone. Sampling
also will stop automatically 10 seconds after it is
started.
Sampled sound 1
Lights
S1 :Or
• In place of the above steps, you could press 6 and bt at
the same time and then select a tone number.
2. Press 6.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
Wa i t i n
Flashes
g
Used memory
(Unit: Kbytes)
g
n l
Remaining memory
capacity
5. Play something on the Digital Piano.
• You may not be able to get 10 seconds of sampling if
Digital Piano memory is low due to storage of other data. If
this happens, deleting other memory data you no longer
need will free up memory space and you should be able to
sample for 10 seconds. See “Deleting a Sampled Sound”
on page E-23 for more information.
• Sampling sound and storing it will delete any sound
data currently stored under the same tone number. To
help ensure that you do not accidentally delete
important data, be sure to read “Protecting Against
Accidental Deletion of Sampled Sounds” on page E-23.
E-17
English
Sampling and Playing a Melody
Sound (Melody Sampling)
Sampling Sounds and Playing Them on the Digital Piano
■ How sampled sounds are played
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.
Changing the Volume of Sampled Sound
Looped Playback
You can use the following procedure to change the volume
level of the looped playback of each sampled sound, if you
want.
1. Press the button of the sampled sound whose
volume you want to change (cm to cq).
• This will cause the sounds loop to sound.
C4
2. While the loop is sounding hold down the same
sampled sound button (cm to cq) as you press
Looping a Sampled Sound
You can use the following procedure to loop a sampled sound
so it continues to repeat, as you play on the Digital Piano.
1. Press bs.
2. While holding down 6, press cr.
• Pressing the keyboard key quickly will increase sample
sound volume, while pressing slowly will decrease
volume.
3. After the sampled sound is at the volume level
you want, release its button (cm to cq).
This enters repeat standby.
Funk
any keyboard key.
8B t
Lights
3. Press the button (cm to cq) that corresponds to
the melody sampling tone number you want to
select.
This will start looped playback of the selected sound.
To select this tone number:
Press this button:
671
cm
cn
co
cp
cq
672
673
674
675
4. Press the same button again to stop playback.
5. Press cr to return to the screen that was
displayed before step 2 of this procedure.
E-18
B
Applying Effects to a Sampled Sound
You can apply various effects to sampled sounds.
1. Press bt and then use cl (10-key) to enter the
tone number (671 to 675) to which you want to
apply effects.
2. Press bt to cycle thorough the available
effects, described below.
Effect Type
(Display)
Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
You can use the procedure to change the drum sounds that
are assigned to each keyboard key.
• You can store up to three drum sets and store them as tone
numbers 676, 677, and 678. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.
1. Press bs.
Description
Original (Orgnl)
Normal sampled tone (no looping, no
effect).
Loop 1 (Loop1)
Loops the sampled sound.
Loop 2 (Loop2)
Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.
Loop 3 (Loop3)
Loops the sample sound and lowers the
pitch of the resonating sound when the
keyboard key is released.
Pitch 1 (Ptch1)
Changes the pitch from low to high, at an
increasing rate.
Pitch 2 (Ptch2)
Changes the pitch from high to low, at a
decreasing rate.
Pitch 3 (Ptch3)
Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.
bs lights.
2. Press bt and then use cl (10-key) to enter the
tone number (676, 677, or 678) for the drum set
whose sounds you want to change.
No Da t a
Lights
• In place of the above steps, you could press 6 and bs
at the same times and then select a tone number.
3. Press 6.
No Da t a
Tremolo (Treml) Alternates volume between high and low.
Funny 1 (Funy1)
Adds vibrato and changes the pitch by a
gradually increasing amount.
Funny 2 (Funy2)
Alternates between high pitch and low
pitch.
Funny 3 (Funy3)
Adds vibrato and changes the pitch from
low to high.
Flashes
• Avoid assigning the same sampled sound (tone number
671 to 675) to the keyboard for play along and for looped
play. Doing so will cause, the Loop 1 effect to be applied to
the keyboard tone while looped play of the sampled sound
is being performed.
E-19
English
Sampling Sounds and Playing Them on the Digital Piano
Sampling Sounds and Playing Them on the Digital Piano
4. Press the keyboard key to which you want to
assign the drum sound you are about to
sample.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
Wa i t i n
g
Flashes
5. Output the sound from the external device. In
the case of a microphone, output the sound in
the direction of the microphone.
Sampling will start automatically.
Samp l i n
g
Lights
6. After the sound you want to sample is finished,
press 6.
Smp l D r m1
Remaining memory capacity
Sampling will stop when you release 6.
• Even if you do not press 6, sampling will stop
automatically whenever there is no more sound being
input from the external device or microphone. Sampling
also will stop automatically 10 seconds after it is
started.
7. Press the keyboard key.
E-20
• You can repeat steps 3 through 6 to change other sounds
that make up the currently selected drum set. There are
eight sounds per drum set.
• You may not be able to get 10 seconds of sampling if
Digital Piano memory is low due to storage of other data. If
this happens, deleting other memory data you no longer
need will free up memory space and you should be able to
sample for 10 seconds. See “Deleting a Sampled Sound”
on page E-23 for more information.
• Sampling a sound will delete any sound data currently
assigned to the same keyboard key. To help ensure
that you do not accidentally delete important data, be
sure to read “Protecting Against Accidental Deletion of
Sampled Sounds” on page E-23.
Sampling Sounds and Playing Them on the Digital Piano
You can use the procedures in this section to copy the drum
sound assigned to one keyboard key to another key, to
change the pitch of a sound, and to delete a sampled sound.
1. Press bt and then use cl (10-key) to enter the
tone number (676, 677, or 678) for the drum set
you want.
2. Press 6.
3. Press 7.
Smp l D r m1
■ To change the pitch of a sampled sound
While holding down the keyboard key of the sampled sound
whose pitch you want to change, use the cl (10-key) [–] and
[+] keys to change the pitch.
• You can change the pitch within a range of –64 to 63
semitones.
■ To delete a keyboard key’s sampled sound
While holding down the keyboard key whose sound you want
to delete, press bs. In response to the “DelSure?” message
that appears, press the cl (10-key) [+] button to delete, or [–]
to cancel the delete operation.
• Deleting a sampled sound will return the key to its initial
default built-in sound.
Example: To delete the sound assigned to key D3
Flashes at high speed
This is the editing mode.
• While in the editing mode, you can copy a sound,
change the pitch of a sound, or delete a sound (each of
which is described below). Pressing 7 again exits the
editing mode and returns to step 2 of this procedure.
Disappears
Using a Drum Sampling Tone in Auto
Accompaniment (Drum Assign)
Use the following procedure to change the rhythm part of an
Auto Accompaniment pattern to a drum set sound that you
sampled.
Indicates keyboard keys that have sounds assigned.
■ To copy a sampled sound from one key to
another
While holding down the keyboard key to which the sampled
sound you want to copy is assigned, press the keyboard key
to which you want to copy it.
Example: To copy sampled sound of key C3 to key D3
1. Press bs and then use cl (10-key) to enter the
rhythm number of the Auto Accompaniment
pattern you want.
You cannot use a Drum Sampling Tone in a user rhythm,
so do not select a user rhythm in the above step.
2. Press bt and then use cl (10-key) to enter the
tone number of the sampling drum set that
contains the sound you want to use.
3. Press bt.
Indicates the keyboard key whose sound was copied.
• A keyboard key that already has a sampled sound assigned
cannot be selected as a copy destination.
This changes the rhythm part of the Auto Accompaniment
pattern you selected in step 1 to the sampled sound you
selected in step 2.
• To change the Auto Accompaniment rhythm part back
to its original sound, press bt again.
• Some rhythm part drum sounds cannot be replaced by
sampled sounds.
C
E-21
English
Editing Sampled Drum Set Sounds
Sampling Sounds and Playing Them on the Digital Piano
Other Sampling Functions
Changing to a Manual Sampling Start
Normally when the Digital Piano is in sampling standby, it will
start sampling automatically whenever it detects sound input.
You can use the following procedure to enable manual
sampling start, which will cause sampling to wait until you
press a button to start it. You can use this to insert silence
before the sampled sound.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “SAMPLING” (page
E-6).
Changing to Manual Sampling Stop
Normally the Digital Piano will stop sampling automatically
whenever it detects there is no sound input. You can use the
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to
stop it. You can use this to insert silence after the sampled
sound.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “SAMPLING” (page
E-6).
2. Press the cl (10-key) [7] (ENTER) key.
3. Press the cl (10-key) [6] (i) key.
Flashes
SAMP L I NG
2. Press the cl (10-key) [7] (ENTER) key.
Au t oS t r t
3. Press the cl (10-key) [–] key to turn off
automatic sampling start.
This enables manual sampling start, which operates as
described below.
• Melody sampling (page E-17):
Sampling starts when you release 6, which you press
in step 2 of the sampling procedure.
• Drum sampling (page E-19):
Sampling starts when you release the digital piano key
you press in step 4 of the sampling procedure.
Au t oS t o
p
4. Press the cl (10-key) [–] key to turn off
automatic sampling stop.
Even when there is no sound input from an external
device or microphone, sampling will continue until you
press and release 6 or a keyboard key.
• When manual sampling stop is enabled, sampling
stops when you release 6 or the keyboard key, not
when you press it. Sampling does not stop if you hold
down the button or key.
• When manual sampling start is enabled, sampling
starts when you release 6 or the keyboard key, not
when you press it. Sampling does not start if you hold
down the button or key.
E-22
B
Sampling Sounds and Playing Them on the Digital Piano
You can use the following procedure to specify a sampled
tone number and delete its data.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “DELETE” (page
E-6).
Flashes
Protecting Against Accidental Deletion of
Sampled Sounds
You can use the following procedure to protect each sampled
sound against accidental deletion.
1. Press bt and then use cl (10-key) to enter the
tone number of the sampled tone you want to
protect.
2. Press 7 and then use the cl (10-key) [4] (u)
DELETE
and [6] (i) keys to display “SAMPLING” (page
E-6).
3. Press the cl (10-key) [7] (ENTER) key.
2. Press the cl (10-key) [7] (ENTER) key.
4. Use the cl (10-key) [4] (u) and [6] (i) keys to
S1 :Or
g
n l
display “Protect”.
Pro t ec t
Used memory
(Unit: Kbytes)
Remaining memory
capacity
5. Press the cl (10-key) [+] key to turn on
protection.
3. Use the cl (10-key) [–] and [+] keys to select the
tone number of the data you want to delete.
4. Press the cl (10-key) [7] (ENTER) key.
This displays a delete confirmation message.
Su r e?
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
Protected
*1 : Or
g
n l
■ Saving Sample Data on an External Device
5. Press the cl (10-key) [+] (YES) key to delete the
data, or [–] (NO) or [9] (EXIT) to cancel the
delete operation.
• SD memory card (page E-58)
• Computer (page E-65)
• After the delete procedure is complete, “Complete” will
appear on the display followed by the screen in step 2
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see “Editing Sampled Drum Set
Sounds” on page E-21.
E-23
English
Deleting a Sampled Sound
Playing Built-in Songs
7
bk bl bm bn bo bp
• In addition to simple listening enjoyment, the built-in songs
can be used with the lesson system (page E-28) for
practice.
• You can increase the number of tunes using your SD
memory cards (page E-59) or computer (page E-62).
Playing the Demo Songs
Use the following procedure to play back built-in songs.
1. Press bo and bp at the same time.
This will start playback of the demo songs.
• See page E-72 for information about song numbers and
the song sequence.
• Demo playback always starts from song number 151.
Song number
Tune name
Demo T u n e
E-24
cl
bq
With this Digital Piano, built-in tune data is referred to as
“songs”. You can listen to the built-in songs for your own
enjoyment, or you can play along with them for practice.
Flashes
br
2. To change to another song while demo
playback is in progress, use cl (10-key) [–] and
[+] keys to enter the song number you want
(page E-6).
This will cause demo playback to jump to the song whose
number you entered.
• You cannot use cl (10-key) number buttons to select a
song.
3. To stop demo playback, press bo.
Demo playback continues until you stop it by pressing bo.
Playing Built-in Songs
Use the procedure below to play back one of the built-in
songs. You can play along on the keyboard with song
playback.
Pause, Skip Forward, Skip Back
Use the operations in this section to perform pause, skip
forward, and skip back operations.
■ Pause
1. Press bn.
Start/Stop
This pauses song playback.
1. Press br.
2. Press bn again to resume playback from the
Song number
Tune name
point where you paused it.
Tw i n k l e
2. Use cl (10-key) to enter the number of the song
you want.
• See page E-72 for a complete list of available songs.
■ Skip Forward
1. Press bm.
This skips song playback forward to the next measure.
Each press of bm skips ahead one measure. Holding
down bm skips forward at high speed until you release it.
• Pressing bm while song playback is stopped performs
lesson function phrase skip forward (page E-29).
3. Press bo.
This starts playback of the song.
Tempo
Note
Beat
Sustain pedal
Measure
Measure number
■ Skip Back
1. Press bl.
Key
Fingering
4. Press bo again to stop playback.
This skips song playback back to the previous measure.
Each press of bl skips back one measure. Holding down
bl skips back at high speed until you release it.
• Pressing bl while song playback is stopped performs
lesson function phrase skip back (page E-29).
Song playback will continue (repeat) until you press bo to
stop it. You can cancel song repeat by pressing bk
(“REPEAT” indicator disappears from the display).
E-25
English
Playing Back a Particular Song
Playing Built-in Songs
Repeating Playback of Specific Measures
You can use the procedure in this section to repeat particular
measures for practice playing along until you master it. You
can specify the start measure and the end measure of the
section you want to play and practice.
Start
End
These measures are repeated.
1. Press bk to temporarily turn off song repeat
(“REPEAT” disappears from the display).
2. When song playback reaches the measure you
want to specify as the start measure, press bk.
This specifies the measure as the start measure.
Changing Playback Speed (Tempo)
You can use the following procedure to change the speed
(tempo) in order to slow down playback to practice difficult
passages, etc.
1. Press bq.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing w and q at the same time will return the
current song to its original default tempo.
• Pressing bq causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
cl (10-key) to change it. The tempo value will stop
flashing if you do not perform any operation for a short
while.
• Changing the song number will return the song to its
original default tempo.
Adjusting the Song Volume
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.
1. Press 7 and then use the cl (10-key) [4] (u)
Flashes
and [6] (i) keys to display “Song Vol” (page
E-6).
3. When playback reaches the measure you want
to select as the end measure, press bk again.
This specifies the measure as the end measure and starts
repeat playback of the measures in the specified range.
• During repeat play you can use bn to pause playback,
bm to skip forward, or bl to skip back.
Son
g
Vo l
2. Use the cl (10-key) [–] and [+] keys to adjust the
song volume.
Playing with the Tone as Song Playback
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.
Lights
4. Pressing bk again returns to normal playback.
Changing the song number clears the start measure and
end measure of the repeat operation.
1. After selecting a song, hold down br for about
two seconds until the displayed tone name
changes to the tone name of the song.
• If your currently selected tone is the same as the song
tone, the display contents will not change.
2. Play along with song playback.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.
E-26
Playing Built-in Songs
English
Turning Off the Part of One Hand for Practice
(Part Select)
You can turn off the right hand part or the left hand part of a
song during playback and practice playing along with the
remaining part.
1. Press bp to select the part you want to turn off.
Each press of bp cycles through the settings shown
below.
Right hand part off
Left hand part off
Both hand parts off
Both hand parts on
2. Press bo.
This starts playback in accordance with the setting you
selected in step 1.
• During playback with one part turned off, only the notes of
the part that is turned off are shown on the display.
Increasing the Selection of Songs
You can load song data from an external device and increase
the selection of songs available on the keyboard. See the
following pages for more information.
• SD memory card (page E-59)
• Computer (page E-65)
• For information about how to delete song data loaded from
an external device, see page E-55.
E-27
Using Built-in Songs to Master Keyboard Play
7
bk bl bm
bo bp
To master a song, it is best to break it up into shorter parts
(phrases), master the phrases, and then put everything
together. Your Digital Piano comes with a Step Up Lesson
feature that helps you to do just that.
Phrases
The built-in songs are pre-divided into phrases to help you
master keyboard play.
Song start
Phrase 1
Song end
Phrase 2
Phrase 3
. . . .
br
Final
Phrase
cl
cmcn
cm
cn co
cocp
cpcq
cq
Step Up Lesson Flow
Step Up Lesson takes you through practice of the right hand
part, left hand part, and both hand parts for each phrase of a
song. Master all of the phrases and you master the song.
Phrase 1
• Right Hand Lesson 1, 2, 3
• Left Hand Lesson 1, 2, 3
• Both Hand Lesson 1, 2, 3
4
Repeat the above to practice phrase
2, 3, 4, and so on, until you reach the
final phrase of the song.
4
After mastering all of the phrases,
practice the entire song.
4
Now you have mastered the entire
song!
E-28
Using Built-in Songs to Master Keyboard Play
The following are the messages that appear on the display
during Step Lessons.
Message
<Phrase>
Description
Appears when you select a phrase, when a
lesson starts, etc.
• Note that certain phrases will cause “Wait”
to appear instead of “Phrase”.
<Wait>
Appears when the lesson starts with an intro
or fill-in phrase that is not included in the
phrases to be practiced. Play toll advance
automatically to the next phrase after the unincluded phrase plays, so wait until then to
start playing on the keyboard.
NextPhrs
Appears when advancing automatically to the
next phrase. This message appears following
a phrase for which “Wait” (see above) is
displayed, and during an Auto Step Up Lesson
(page E-33).
From top
Complete
This message appears during Auto Step Up
Lesson (page E-33) immediately before
practice from Phrase 1 up until the phrase
currently being practiced.
Appears at the end of Auto Step Up Lesson
(page E-33).
Selecting the Song, Phrase, and
Part You Want to Practice
2. Press cp (or bm) to move forward one phrase, or
bl to move back one phrase.
• Holding down bm or bl scrolls through phrases at high
speed.
• The piano remembers the last phrase you practiced for
up to 20 songs. To recall the last practice phrase for the
current song (if it is available), hold down cp.
Phrase number
<Ph r ase>
First measure of the selected phrase
3. Press bp to select the part you want to practice.
Each press of bp cycles through the settings
shown below.
Right hand practice
Left hand practice
First, select the song, phrase, and part you want to practice.
1. Select the song you want to practice (page
E-25).
Both hand practice
This will select the first phrase of the song.
*
* This indicator (setting) is skipped if you press bp while a
lesson is in progress.
4. Hold down br for about two seconds.
The same tone used for song playback will be assigned to
the keyboard (page E-26).
E-29
English
Messages that Appear during Lessons
Using Built-in Songs to Master Keyboard Play
2. Play notes on the keyboard in accordance with
Lessons 1, 2, and 3
Now it is time to start the lessons. First, select the song and
part you want to practice.
Lesson 1: Listen to the song.
the instructions provided on the display and by
voice fingering guide.
During this lesson, the display shows the key you need to
press next. Voice fingering guide uses a simulate voice to
announce which finger you should use.
First, listen to the example a few times to familiarize yourself
with what it sounds like.
1. Press cm.
Flashes
This starts example play.
Lights
Lights
<Lesson 2 Guidance>
Lights
Master playing the correct note with the correct finger
as instructed by the guidance. Practice playing with the
correct timing.
2. To stop Lesson 1, press cm or bo.
Lesson 2: Watch how the song is played.
Play the song on the keyboard. During this lesson, the display
shows the key you need to press next. Voice fingering guide
also uses a simulate voice to announce which finger you
should use. Follow the instructions to press the correct
keyboard keys and play the notes. Don’t worry if you play the
wrong note. Song playback will wait until you play the correct
note. Take your time and play at your own pace.
4
Song playback will wait for you to play the correct note.
• Keyboard key goes from flashing to lit.
• Note guide sounds the correct note to be played.
• Voice Fingering Guide tells you what finger to use.
4
Pressing the correct keyboard key causes song
playback to resume and the key for the next note
flashes.
1. Press cn.
This starts Lesson 2.
3. To stop Lesson 2, press cn or bo.
Lights
Lights
E-30
● If you complete Lesson 2 play to the end, a score that
rates your play appears on the screen.
Bravo!
You pass! Advance to the next lesson.
Again!
Go back and try again.
Using Built-in Songs to Master Keyboard Play
Though song playback stands by waiting for you to press the
correct keys as in Lesson 2, the Digital Piano does not
provide any guidance about what note you need to play next.
Remember everything you have learned up to Lesson 2 as
you play.
1. Press co.
Playing a Particular Song All the Way
Through
After you successfully complete all of the phrases in Lessons
1, 2, and 3, it is time to try playing the entire song from
beginning to end.
1. Use bp to turn off both hand parts and then
press bo.
Try playing with both hands and find out how the Digital
Piano evaluates your effort.
This starts Lesson 3.
Lights
Lesson Settings
Playing without Phrase Repeat
You can turn off phrase repeat for Lessons 1, 2, and 3.
1. Press bk.
Lights
This disables phrase repeat play.
2. Play the song along with the song playback.
<Lesson 3 Guidance>
Press the keyboard keys you learned in Lesson 2.
4
Disappears
Song playback will wait for you to play the correct note.
• Note guide sounds the correct note to be played.
4
If you are still unable to press the correct keyboard
key, the Digital Piano will display keyboard guidance
and voice fingering guide will tell you what finger to
use, just as in Lesson 2.
4
Turning Off Voice Fingering Guide
Use the following procedure to turn off voice fingering guide,
which tells you which finger to use to play each note in
Lesson 2 and Lesson 3.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “LESSON” (page
E-6).
Pressing the correct key will cause song playback to
resume.
Flashes
L ESSON
3. To stop Lesson 3, press co or bo.
• If you complete Lesson 3 play to the end, a score that
rates your play appears on the screen the same as with
Lesson 2.
2. Press cl (10-key) [7] (ENTER) key.
Speak
3. Press the cl (10-key) [–] key to select the OFF
setting.
Indicator disappears
when voice fingering
guide is turned off.
E-31
English
Lesson 3: Remember what you learned as
you play.
Using Built-in Songs to Master Keyboard Play
Turning Off Note Guide
Changing the Phrase Length
Use the following procedure to turn off note guide, which
sounds the note to be played next in Lesson 2 and Lesson 3.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “LESSON” (page
E-6).
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “NoteGuid”.
You can use the following procedure to change the length of
lesson phrases, or to configure the lesson feature so the song
is played all the way through, without being divided into
phrases.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “LESSON” (page
E-6).
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
No t eGu i d
display “PhraseLn”.
Ph r aseLn
4. Press the cl (10-key) [–] key to select the OFF
setting.
4. Use the cl (10-key) [–] and [+] keys to select the
phrase length you want.
Turning Off Performance Evaluation
Use the following procedure to turn off performance
evaluation, which evaluates your performance and displays a
score in Lesson 2 and Lesson 3.
Off (oFF)
The phrase length is from the beginning
to the end of the song.
Preset (PrE)
Phrase lengths are as specified in the
song.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “LESSON” (page
E-6).
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “Scoring”.
Sco r i n
g
4. Press the cl (10-key) [–] key to select the OFF
setting.
Indicator disappears
when performance
evaluation is turned off.
E-32
The following options are available for songs loaded from
external sources only.
Short (Ln1)
Length of one phrase is one measure.
Middle (Ln2)
Length of one phrase is two measures.
Long (Ln3)
Length of one phrase is four measures.
Using Built-in Songs to Master Keyboard Play
■ Auto Step Up Lesson Procedure
With Auto Step Up Lesson, the Digital Piano advances
through each lesson automatically.
Phrase 1
Lesson 1
1. Select the song and part you want to practice
4
Lesson 2
English
Using Auto Step Up Lesson
4
Lesson 3
(page E-25).
2. Press cq.
Listen to the first phrase in Lesson 1.
• In Lesson 1, the sample phrase is played only once
before advancing to Lesson 2.
4
Phrase 2
Lesson 1
4
Lesson 2
Flashes
Lights
4
Lesson 3
4
Phrase 1, 2
• Lesson 3*
3. Auto Step Up Lesson stops automatically after
you are able to get through all of the lessons
successfully.
• In Lesson 2 and Lesson 3, the Digital Piano advances
to the next lesson if you are able to achieve the “Bravo!”
evaluation result.
• To cancel a lesson, press cq or bo.
• You can change the step and phrase during Auto Step Up
Lesson using bl, bm, and cm to cp.
• Starting Auto Step Up Lesson automatically turns on
phrase repeat (page E-31) and play evaluation (page
E-32). These features cannot be turned off during lessons.
4
Phrase 3
Lesson 1
4
Lesson 2
4
Lesson 3
4
Phrase 1, 2, 3
• Lesson 3*
4
Next phrase practice using the same
procedure
4
Final phrase
Lesson 1
4
Lesson 2
4
Lesson 3
4
From Phrase 1 to the final phrase
• Lesson 3*
4
Lesson complete
* Auto Step Up Lesson advances to the next phrase,
regardless of whether the “Bravo!” result is attained.
E-33
Music Challenge Keyboard Game
1
br bs
bo
Music Challenge is a game that measures your reaction
speed as you press keys in response to on-screen keyboard
indicators and fingering guide indications.
1. Press br.
2. Press cr.
This causes a key on the on-screen keyboard to start to
flash, and starts the Music Challenge song.
Number of remaining notes
M . CHA L . !
bt
cr
4. The game ends when you advance successfully
through 20 notes.
• Your playing time appears on the display. After a short
while, the playing time display changes to a score. To
clear the score from the display, press br, bs, or bt.
• You can cancel a game at any time by pressing cr or
bo.
Playing time
T i me 1 9 . 2
Fingering
Displayed during a game.
3. After the on-screen keyboard indicator changes
from flashing to lit, press the indicated key with
the indicated finger as quickly as possible.
This causes the on-screen keyboard key to go out to let
you know that you cleared the first note. The next onscreen keyboard key starts to flash, so get ready to press
the next key.
• The time it takes you to press the keyboard key after
the on-screen key lights appears on the display (Unit:
0.1 sec). The shorter the time, the higher your score.
• Pressing a keyboard key before the on-screen key
goes from flashing to lit, will not advance to the next
note.
Time
Sco r e 80
Score
• Notes and fingering guide fingers are indicated randomly.
• The tempo of the game songs cannot be changed.
• All buttons except 1, bo, and cr are disabled while a game
is in progress.
0.3sec
M . CHA L . !
E-34
C
7
bk bl bm bn bo bp
bs
cl
bq
With Auto Accompaniment, simply select an accompaniment
pattern. Each time you play a chord with your left hand the
appropriate accompaniment will play automatically. It’s like
having a personal backup group along with you wherever you
go.
• Auto Accompaniments are made up of the following three
parts.
(1) Rhythm
(2) Bass
(3) Harmony
You can have only the rhythm part play, or you can have all
three parts play at the same time.
Playing the Rhythm Part Only
The rhythm part is the foundation each Auto Accompaniment.
Your Digital Piano comes with a variety of built-in rhythms,
including 8-beat and waltz. Use the following procedure to
play the basic rhythm part.
English
Using Auto Accompaniment
dk
Starting and Stopping the Rhythm Part Only
1. Press bs.
Rhythm number
Rhythm pattern name
Funk
8B t
2. Use cl (10-key) to select the rhythm number
you want.
• See the separate “Appendix” for information about
individual rhythms.
3. Press bo or bl.
This starts the rhythm.
This pattern changes with each beat.
4. Play along with the rhythm.
5. To stop the rhythm, press bo again.
E-35
Using Auto Accompaniment
5. Pressing bp again returns to rhythm only
Playing All Parts
accompaniment.
Auto Accompaniment with Chords
Playing a chord with your left hand automatically adds bass
and harmony accompaniment parts to the currently selected
rhythm. It is just like having your own personal back up group
on call.
1. Start play of the Auto Accompaniment rhythm
part.
2. Press bp.
This enables chord input on the accompaniment
keyboard.
Accompaniment keyboard
• For information about starting Auto Accompaniment as
soon as a chord is played, see “Using Synchro Start” on
page E-39.
• You can use the split point to change the size of the
accompaniment keyboard range (page E-13).
Selecting a Chord Input Mode
You can select from among the following five chord input
modes.
• FINGERED 1
• FINGERED 2
• FINGERED 3
• CASIO CHORD
• FULL RANGE CHORD
1. Hold down bp until the chord input mode
selection screen appears on the display.
Lights
Chord input mode
Cho r d
2. Use the cl (10-key) [–] and [+] keys to select the
3. Use the accompaniment keyboard to play
chords.
This will cause bass and harmony Auto Accompaniment
parts to be added to the rhythm part.
Chords
(no melody played)
Melody
chord input mode you want.
• For information about each chord input mode, see the
separate “Appendix”.
• If you do not perform any operation after the chord input
mode selection screen appears, the display will return
automatically to the screen that was displayed before
you held down bp.
F3
Example: Pressing D-F#-A-C on the accompaniment keyboard
4
Accompaniment for the D-F#-A-C chord (D7) sounds.
4. Play other chords with left hand as you play the
melody with your right hand.
E-36
B
Using Auto Accompaniment
With these three input modes, you finger 3-note or 4-note
chords on the accompaniment keyboard. Note that with some
chords, even if you do not finger the third or fifth note, they will
be played anyway.
Accompaniment keyboard
● FINGERED 1
Play the component notes of the chord on
the keyboard.
● FINGERED 2
Unlike FINGERED 1, 6th input is not
b
possible. m7 or m7 5 is input.
● FINGERED 3
Unlike FINGERED 1, allows input of
fraction chords with the lowest keyboard
note as the bass note.
■ CASIO CHORD
With CASIO CHORD, you can use
simplified fingerings to play the four types
of chords described below.
Accompaniment keyboard
CASIO CHORD Fingering
Chord Type
Example
English
■ FINGERED 1, 2, and 3
Major Chords
Letters above the accompaniment
keyboard indicate the chord
assigned to each key. Pressing a
single accompaniment area key in
the CASIO CHORD mode will play
the major chord whose name is
marked above the key. All of the
accompaniment area keys that are
marked with the same chord name
play exactly the same chord.
C (C Major)
Minor Chords
To play a minor chord, press the
accompaniment area key that
corresponds to the major chord,
while also pressing one other
accompaniment area key to the
right.
Cm (C Minor)
Seventh Chords
To play a seventh chord, press the
accompaniment area key that
corresponds to the major chord,
while also pressing two other
accompaniment area keys to the
right.
C7 (C Seventh)
Minor Seventh Chords
To play a minor seventh chord,
press the accompaniment area key
that corresponds to the major
chord, while also pressing three
other accompaniment area keys to
the right.
Cm7
(C Minor Seventh)
C C#D Eb E F F#G Ab A Bb B C C#DEb E F
C C#D Eb E F F#G Ab A Bb B C C#DEb E F
C C#D Eb E F F#G Ab A Bb B C C#DEb E F
C C#D Eb E F F#G Ab A Bb B C C#DEb E F
• When playing a minor, seventh, or minor seventh chord, it
makes no different whether the additional keys you press
are black or white.
■ FULL RANGE CHORD
With this mode, you can use the full range
of the keyboard to play chords and the
melody.
Accompaniment keyboard / Melody keyboard
E-37
Using Auto Accompaniment
Using Auto Accompaniment
Effectively
Auto Accompaniment Pattern Variations
Use the following procedures to play intro and ending
patterns, to play fill-in patterns, and to play variations of basic
Auto Accompaniment patterns.
■ Auto Accompaniment Variation
Each Auto Accompaniment pattern has a basic “normal
pattern” as well as a “variation pattern”.
1. Press bm.
■ Auto Accompaniment Fill-in
Use the procedure below to play a fill-in pattern during a
performance.
• A “fill-in” is a short phrase played where you want to change
the mood of a piece. A fill-in pattern can be used to create a
link between two melodies or an accent.
• Normal and variation patterns have their own unique fill-in
patterns.
● Normal Pattern Fill-in
1. While a normal pattern is playing, press bl.
This plays the fill-in for the normal pattern.
• Normal pattern play will resume after the fill in pattern is
complete.
This starts the variation pattern.
Lights
Lights
● Variation Pattern Fill-in
2. Pressing bl returns to normal pattern.
Lights
1. While a variation pattern is playing, press bm.
This plays the fill-in for the variation pattern.
• Variation pattern play will resume after the fill in pattern
is complete.
Lights
■ Auto Accompaniment Intro
Use the following procedure to play an intro of a few
measures.
1. Press bk.
This starts the intro pattern. Normal pattern play will start
when the intro pattern is finished.
• If you press bm while an intro pattern is being played,
the variation pattern will start when the intro pattern is
finished.
Lights
■ Auto Accompaniment Ending
Use the following procedure to play an ending of a few
measures.
1. While an Auto Accompaniment is playing, press
bn.
This will play the ending pattern and then stop Auto
Accompaniment play automatically.
Lights
E-38
Using Auto Accompaniment
Use the following procedure to configure the Digital Piano to
start Auto Accompaniment play as soon as you press a
keyboard key.
1. Press bn.
This enters accompaniment start standby.
Flashes
Adjusting the Accompaniment Volume
Use the following procedure to adjust the balance between
what you are playing on the keyboard and the volume of the
Auto Accompaniment.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “AcompVol” (page
E-6).
A c ompVo l
2. Use the cl (10-key) [–] and [+] keys to adjust the
2. Play a chord on the keyboard.
accompaniment volume.
This will start full part accompaniment (normal).
Any of the following operations can be performed while in
synchro standby to start a non-normal pattern.
• To start with intro pattern, press bk.
• To start with variation pattern play, press bm.
Changing Auto Accompaniment Speed
(Tempo)
Use the following procedure to change Auto Accompaniment
speed to a level that suits you.
1. Press bq.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
rhythm.
• While the tempo value is flashing, you also can use cl
(10-key) to change it.
• If you do not perform any operation for a few seconds
after the tempo setting screen appears, the display will
return to the screen displayed before you pressed bq.
Using One-Touch Preset
With One-Touch Preset, the Digital Piano automatically
configures optimal tone, tempo, and other settings in
accordance with the rhythm pattern you select.
1. Hold down bs until the current tone screen
appears on the display.
This will automatically apply the One-Touch Preset
settings in accordance with the rhythm pattern that is
currently selected.
2. Play a chord on the keyboard.
This will start accompaniment automatically.
Flashes
E-39
English
■ Using Synchro Start
Using Auto Accompaniment
Type
number
Using Auto Harmonize
Auto Harmonize automatically adds harmony to notes you
play with your right hand, which adds rich depth to the melody
of your performances. You can select from among 12 types of
Auto Harmonize to suit the type of music you are playing.
Type Name
Description
1
Duet 1
Adds close (separated by 2 to 4
degrees) 1-note harmony below
the melody note.
2
Duet 2
Adds open (separated by more
than 4 to 6 degrees) 1-note
harmony below the melody note.
3
Country
Adds country style harmony.
4
Octave
Adds the note from the next lower
octave.
chords (ACCOMP indicator lit) (page E-36).
5
5th
Adds the fifth degree note.
• Auto Harmonize cannot be used while FULL RANGE
CHORD is selected as the chord input mode. Select
another mode if you want to use Auto Harmonize.
6
3-Way Open
Adds 2-note open harmony, for a
total of three notes.
7
3-Way Close
Adds 2-note close harmony, for a
total of three notes.
Arpeggiator type number and type name appear
on the display.
8
Strings
Adds harmony that is optimal for
strings.
• If you do not perform any operation for a few seconds,
the display will return to previous screen automatically.
9
4-Way Open
Adds 3-note open harmony, for a
total of four notes.
10
4-Way Close
Adds 3-note close harmony, for a
total of four notes.
11
Block
Adds block chord notes.
12
Big Band
Adds big band style harmony.
• Auto Harmonize is controlled using the same button dk as
the Arpeggiator (page E-54). Because of this, these two
functions cannot be used at the same time.
1. Press bp to enable Auto Accompaniment with
2. Hold down dk until the Auto Harmonize or
Type number
Type name
Due t
1
3. Use the cl (10-key) [–] and [+] keys to select the
Auto Harmonize type you want.
• 13 through 102 are Arpeggiator types (page E-54). Do
not select them when using the Auto Harmonize.
Due t
2
4. Press dk to turn on Auto Harmonize.
If you play chords with your left hand and the melody with
your right hand, harmony notes will be added to the
melody.
• Press dk again to turn off Auto Harmonize.
S tGrPno
Lit when on
E-40
4
7
bs
English
Editing Auto Accompaniment Patterns
cl
bk bl bm bn bo bp
■ Editable Contents
You can use the procedure in this section to edit the Digital
Piano’s built-in Auto Accompaniment rhythm patterns and
create your own “user rhythms”.
• You can store up to 10 user rhythms in Digital Piano
memory, using rhythm numbers 201 through 210.
•
•
•
•
•
•
•
■ Editable Accompaniment Patterns and
Instrument Parts
Any of the following parts that make up each rhythm that is
assigned a rhythm number can be edited.
Accompaniment patterns (intro, fill-in, etc.): 6 types
Instrument parts (drum, bass, etc): 8 types
To edit and save an Auto Accompaniment
1. Select the number of the rhythm you want to
edit.
Accompaniment Pattern
I
N
NF
V
VF
E
Button
ENDING
VARIATION
FILL-IN
VARIATION
NORMAL
FILL-IN
NORMAL
2. Press 4.
1 Drum
I-1
N-1
NF-1
V-1
VF-1
E-1
bp
2 Percussion
I-2
N-2
NF-2
V-2
VF-2
E-2
3 Bass
I-3
N-3
NF-3
V-3
VF-3
E-3
4 Chord 1
I-4
N-4
NF-4
V-4
VF-4
E-4
5 Chord 2
I-5
N-5
NF-5
V-5
VF-5
E-5
6 Chord 3
I-6
N-6
NF-6
V-6
VF-6
E-6
7 Chord 4
I-7
N-7
NF-7
V-7
VF-7
E-7
8 Chord 5
I-8
N-8
NF-8
V-8
VF-8
E-8
bk
bl
bl
bm
bm
bn
Button
B
INTRO
Instrument
Parts
Rhythm number
Part on/off
Tone number
Volume level
Left-right speaker balance (panning)
Reverb depth (reverb send)
Chorus depth (chorus send)
Rhythm number Instrument part
Editable content
Drm: Rh
Lights
y
.
Accompaniment Pattern (Flashes)
If the “Err Mem Full” message appears on the display, see
page E-71 for information about what you should do.
E-41
Editing Auto Accompaniment Patterns
3. Press a button from bk to bn to select the
7. To edit the other contents, press 7 to display
Accompaniment Pattern you want to edit.
the screen for the setting you want.
The name of the pattern will appear on the display.
• Each press of 7 will cycle through the settings shown
below, from 1 through 6.
• Use the cl (10-key) [–] and [+] keys to change the
currently selected setting.
• You can play the current settings of the editable part by
pressing bo.
D r m : Rh
y
.
bm Variation selected
Setting Type
Pattern selected by each button
bk: Intro
bl: Normal, Normal Fill-in
(Each press toggles the selection.)
bm: Variation, Variation Fill-in
(Each press toggles the selection.)
bn: Ending
4. Press bp to select the instrument part you want
to edit.
The part number of the part you select will flash on the
display.
Parts that contain data.
Flashing: Part selected for editing.
Display
Settings
1 Part on/off
Part
On/Off
2 Tone number*
Tone
001 - 653
3 Volume level
Vol.
000 - 127
Left-right speaker balance
4
(panning)
Pan
–64 - 0 - +63
5 Reverb depth (reverb send) Rvb
000 - 127
6 Chorus depth (chorus send) Cho.
000 - 127
* Instrument parts 1 and 2 can be assigned drum set tones
(built-in tones 654 to 670) only.
8. Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the
pattern you selected in step 3.
Part 6 (Chord 3)
5. Press bs.
This will display the rhythm number.
6. Use the cl (10-key) [–] and [+] keys to select the
rhythm number you want to assign to the
instrument part you are editing.
A different rhythm number is assigned for each instrument
part.
• You can play the data of the currently selected rhythm
number by pressing bo.
• All of the eight instrument parts of an intro (I-1 to 8)
must have the same rhythm number. If you assign
rhythm 003 to I-1, for example, 003 also will be
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.
E-42
• If you change the rhythm number in step 6, the editable
contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.
9. Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns
you want (intro through ending).
10. Press 4.
This will display a message asking if you want to save the
user rhythm.
B
Editing Auto Accompaniment Patterns
saving.
This displays the delete confirmation message.
Press the cl (10-key) [+] key to exit the editing procedure.
11-2.Press the cl (10-key) [+] key to save the data.
F u n k
To delete saved data
The following procedure cannot be performed while an Auto
Accompaniment editing (rhythm edit) operation is in progress.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “DELETE” (page
E-6).
8B t
• Use cl (10-key) [–] and [+] keys to select the rhythm
number you want to save.
• You can edit the user rhythm name. Use the cl (10key) [4] (u) and [6] (i) keys to move the cursor to the
character you want to change, and then use [+] and [–]
to change the character.
Flashes
DELETE
Used memory (Unit: Kbytes)
Remaining memory capacity
2. Press the cl (10-key) [7] (ENTER) key.
3. Press the cl (10-key) [6] (i) key.
User rhythm name
Use 1
4. Use the cl (10-key) [–] and [+] keys to select the
12. Press cl (10-key) [7] (ENTER) key.
This will display a message asking if you want to save the
user rhythm.
• Press the cl (10-key) [+] key to save the data.
• Press the cl (10-key) [–] key to return to the screen
that was displayed before you pressed [7] (ENTER)
key.
user rhythm you want to delete.
5. Press the cl (10-key) [7] (ENTER) key.
This displays a delete confirmation message.
Su r e?
6. Press the cl (10-key) [+] (YES) key.
• If you select a user rhythm number that already
contains data, the existing data will be replaced by the
new data.
• You cannot change the tone assigned to the keyboard
while an Auto Accompaniment editing (rhythm edit)
operation is in progress.
B
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
■ Saving User Rhythm Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
E-43
English
11-1.Press the cl (10-key) [–] key to exit without
Saving Keyboard Setups to Registration Memory
7
bk bl bm bn bo bp
bq
Registration memory lets you store Digital Piano setups (tone,
rhythm, etc.) for instant recall whenever you need them.
Registration memory simplifies performance of complex
pieces that require successive tone and rhythm changes.
You can have up to 32 setups in Registration memory at one
time. cm and cn to cq are used for recording.
cm
cn
co
cp
bs
cq
cl
cmcn
cm
cnco
cocp
cpcq
cq cr
dk
■ Registration Save Example
This example saves the data shown in the table below to the
following setups in Bank 1.
• Initial melody setup saved to Setup 1-1.
• Second melody setup saved to Setup 1-2.
• Third melody setup saved to Setup 1-3.
Setup 1–1
Setup 1–2
Setup 1–3
Tone Number
001
062
001
Rhythm Number
118
005
089
Tempo
080
140
089
■ Registration Memory Data
The following is the complete list of data that is saved to a
registration memory setup.
Area 1
Area 2
Area 3
Area 4
Bank 1
Setup 1-1
Setup 1-2
Setup 1-3
Setup 1-4
Bank 2
Setup 2-1
Setup 2-2
Setup 2-3
Setup 2-4
.
.
.
.
.
.
.
.
.
.
Bank 8
Setup 8-1
Setup 8-2
Setup 8-3
Setup 8-4
• Each press of bank select button cm cycles through the
bank numbers, from 1 to 8.
• Pressing a button from cn to cq selects the corresponding
area in the currently selected bank.
E-44
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Tone numbers (main, layer, split)
Rhythm number
Tempo
Auto Harmonize
Transpose
Split point
Touch Response
Octave shift
Chord fingerings
Accompaniment volume
Arpeggiator setting (on, off, type)
Synchro start
Reverb (on, off, type)
Chorus (on, off, type)
Bend Range
Accomp (on, off)
Arpeggiator hold (on, off)
Layer (on, off)
Split (on, off)
Pedal effect
To save a setup to registration
memory
1. Press bs.
To recall a setup from registration
memory
1. Press cm to select the bank that contains the
Lights
setup you want to recall.
Bank 6
Bank number
2. Configure the tone, rhythm, and other settings
you can to include in the setup.
3. Press cm to select the bank you want.
Each press of cm cycles through the bank numbers.
2. Use buttons cn to cq to select the area whose
setup you want to recall.
This will recall the registration memory setup and
automatically configure the piano settings accordingly.
Setup 6-1 recalled
Reca l l
Bank 4
• You also can select a bank by holding down cm as you
use the cl (10-key) number buttons to enter a bank
number.
4. While holding down cr, press a button from cn
to cq to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
Stored in Setup 4-1
St ore
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-15). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the piano. However, if you
disconnect the AC adaptor, data in registration memory will be
deleted.
E-45
English
Saving Keyboard Setups to Registration Memory
Recording Your Keyboard Play
8
br bs
bo bp
The recorder feature lets you record your keyboard play.
bt
cl
cm cn
cnco
cocp
cpcq
cq cr
4. Configure the tone, rhythm, and other settings
you want to use.
Recording and Playing Back
Keyboard Play
Use the following procedure to record everything you play on
the keyboard.
1. Press bs.
5. Start playing.
Recording starts as soon as you play something on the
keyboard.
• You can use Auto Accompaniment while playing. If you do,
Auto Accompaniment also will be recorded.
2. Press 8.
6. To stop recording, press bo.
Lights
Lights
Lights
3. Press 8 again.
This will enter record stnadby.
7. To play back what you have recorded, press bo
again.
Flashes
Each press of bo starts and stops playback.
Flashes
E-46
8. Press 8 twice to exit the recorder mode.
Using Tracks to Record and Mix
Parts
You can divide a song according to various types of parts
(instrument, left and right hand, etc.), and record each part to
a specific track. You can mix up to six tracks (the original track
plus five additional tracks) into a final song.
Disappears
• The flashing on the screen shown in step 3 becomes
faster when remaining recorder memory capacity
becomes less than 100 notes.
• Total recorder memory capacity is approximately
12,000 notes. Recording will stop automatically when
there is no more unused recorder memory remaining.
• Each press of 8 cycles through the settings shown
below. You can listen to the recorded data as many
times as you like by pressing bo while in playback
standby.
Recorder Off
Playback
Standby
Record
Standby
Disappears
Lights
Flashes
■ To delete recorded data
After step 3 of the above procedure, do hold down 8 (without
pressing any keyboard key) until the message “Tr.Del?”
appears on the display. Press [+] (YES) to delete the data, or
[–] (NO) to cancel the delete operation.
■ About tracks
Tracks are numbered from 1 to 6.
• If you do not specify a track number when recording,
recording is performed to Track 1 automatically.
In addition to what you play on the keyboard, the following
information also is recorded.
• Track 1
Settings:
Tone number, rhythm number, tempo, reverb, chorus,
chords, layer/split settings, Auto Harmonize/Arpeggiator
setting
Operations:
Pedal, pitch bend wheel, INTRO button, SYNCHRO/
ENDING button, NORMAL/FILL-IN button, VARIATION/
FILL-IN button
• Tracks 2 through 6
Tone number, pedal operation, pitch bend wheel operation
To record to Tracks 1 through 6
1. Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
“Recording and Playing Back Keyboard Play” (page
E-46).
Lights
• Turning off the piano while recording is in progress will
cause any data in recorder memory to be deleted.
• A new recording replaces (deletes) previously recorded
contents.
■ Maintaining Data in Recorder Memory
After you save data in recorder memory, it will remain there as
long as power is supplied to the piano. However, if you
disconnect the AC adaptor, data in recorder memory will be
deleted.
Lights
2. Press 8.
This will enter record standby.
Flashes
Flashes
C
E-47
English
Recording Your Keyboard Play
Recording Your Keyboard Play
3. Press a button from cn to cr to select the track
8. Press 8 twice to exit the recorder mode.
number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
Flashes
Disappears
■ To delete a recorded track
Flashes
• If you want to use a different tone than the one you
used in Track 1, press bt and then use cl (10-key) to
input the tone number.
4. Press bo.
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
5. To stop recording, press bo.
• To play back what you have recorded, press bo again.
Each press of bo starts and stops playback.
6. Repeat steps 2 through 5 to record the other
tracks.
7. After you finish recording all of the tracks,
press bo.
• This will start playback of the recorded tracks. Press bo
to stop or restart playback.
• At this time you can turn off playback of specific tracks
using buttons cm to cr. Pressing a key toggles playback
of each track on (track number displayed) or off (track
number not displayed).
• If you want to re-record a track, press 8. This will
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
After step 3 of the above procedure, do hold down 8 (without
pressing any keyboard key) until the message “Tr.Del?”
appears on the display. Press [+] (YES) to delete the track, or
[–] (NO) to cancel the delete operation.
Recording Two or More Songs,
and Selecting One for Playback
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.
1. Press bs.
2. Press 8.
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use cl (10-key) to
specify the number of the song you want to record or play
back. The song number will disappear if you do not
perform any operation.
Example: Song 2
Pl a
y
No .
3. Press 8 to record, or bo to play back.
To stop recording or playback, press bo.
4. Press 8 twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down 8 (without
pressing any keyboard key) until the message “Song Del?”
appears on the display. Press [+] (YES) to delete the song, or
[–] (NO) to cancel the delete operation.
Disappears
E-48
C
Recording Your Keyboard Play
5. Press bp to cycle through the parts in the
sequence shown below.
This section explains how to play along and record along with
one of the keyboard’s built-in songs.
English
Recording while Playing Along
with a Built-in Song
Right-hand Recording
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings, pitch bend wheel operation
Left-hand Recording
Both-hand Recording
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
Example: Left-hand part recording
Flashes
1. Press br.
2. Press 8.
This will enter playback standby.
• Configure tone and tempo settings at this time as well.
6. Press bo to start built-in song playback and
recorder recording.
Lights
3. Press 8 again.
This will enter record standby.
Play along with the playback.
• To stop recording part way through, press bo.
7. Recording will stop automatically when the end
of the built-in song is reached.
This will enter playback standby.
Flashes
Flashes
Lights
8. Press bo.
This will start playback of what you recorded.
• Each press of bo starts and stops playback.
4. Use cl (10-key) to enter the song number you
9. Press 8 twice to exit the recorder mode.
want to assign to the recording.
Disappears
■ To delete recorded data
After step 2 of the above procedure, do hold down 8 until the
message “Song Del?” appears on the display. Press [+] (YES)
to delete the song.
C
E-49
Recording Your Keyboard Play
Saving Recorded Data on an
External Device
You can save data you record with the piano onto an SD
memory card or on your computer’s hard disk. In the case of
an SD memory card, you can save recorded song data as a
standard MIDI file (SMF 0 format).
■ To save data to an SD memory card
See page E-58.
■ To save data on your computer’s hard disk
See page E-65.
E-50
5
7
bs
bt
cl
cn co
cocp
cp cq
cqcr
cr
Changing the Scale of the
Keyboard
You can use the procedure in this section to change the scale
(tuning system) of the keyboard from the standard equal
temperament to another scale that is more suitable for playing
Indian music, Arabic music, ancient classics, etc.
You can select from among 16 preset scales, or you can
adjust specific notes to created the scale you want.
The Scale Editor provides you the following four options for
changing the scale.
Description
Scale Fine
Tune
“Fin”
“ScalMode”
Changes the tuning value
in 1-cent steps within the
range of +99 to –99 cents.
Quarter Tone
“qUA”
“ScalMode”
Lowers the tuning value by
–50 cents. Use the option
to lower the E and G notes
of the scale for Arabic
music.
Preset
“PrE”
“ScalMode”
Use this option to select
from among a collection of
preset scales.
Equal
“EqU”
Temperament “ScalMode”
dk
3. Use the cl (10-key) [–] and [+] keys to select the
Scale Editor option you want.
• If you do not perform any operation for a few seconds
after the selection screen appears, the display will
return to the previous screen automatically.
4. Press 5.
Now you can perform one of the scale editing operations
described below.
■ Scale Fine Tune
Using the Scale Editor
Display
Indicator
English
Other Useful Digital Piano Functions
1. Press the key whose note you want to change,
and then use the cl (10-key) [–] and [+] keys to
change the tuning value.
2. After you are finished, press 5 to assign the
scale to the keyboard.
Tuning value
Keyboard key
F i n :C
The keyboard key(s) whose notes were changed will be lit.
Changes the scale to the
standard equal
temperament.
1. Press bs.
2. Press 5 and 7 at the same time.
S c a l Mo d e
C
E-51
Other Useful Digital Piano Functions
■ Quarter Tone
■ Preset
1. Press the key whose note you want to change,
and then press the cl (10-key) [–] key to reduce
1. Use the cl (10-key) [–] and [+] keys to select the
the tuning value by –50 cents. You can return to
the original tuning by pressing [+].
2. After you are finished, press 5 to assign the
scale to the keyboard.
Tuning value
preset scale you want. After selecting a scale,
press the key on the keyboard that you want to
use as the root key (C to B).
2. After you are finished, press 5 to assign the
scale to the keyboard.
Keyboard key
Scale Name
Pu r eM i n r
Qua : E
No.
The keyboard key(s) whose notes were changed will be lit.
• You can perform a Quarter Tone operation without using
the Scale Editor (page E-51). Hold down the 5 button and
press the desired keyboard key. This will lower the tuning
value of the keyboard key by –50 cents. If the tuning value
of the key you press was previously lowered by –50 cents,
performing the above operation will raise it +50 cents,
which returns to its original value.
01
Scale name
Display
Pure Major
PureMajr
02
Pure Minor
PureMinr
03
Pythagorean
Pythagor
04
Kirnberger 3
Kirnbrg3
05
Werckmeister
Wercmeis
06
Mean-Tone
MeanTone
07
Rast
Rast
08
Bayati
Bayati
09
Hijaz
Hijaz
10
Saba
Saba
11
Dashti
Dashti
12
Chahargah
Chaharga
13
Segah
Segah
14
Gurjari Todi
GujrTodi
15
Chandrakauns
Cndrkuns
16
Charukeshi
Carukesi
■ Equal Temperament
Select this option to change the keyboard scale to the
standard equal temperament.
S c a l Mo d e
E-52
Other Useful Digital Piano Functions
Saving User Scales
■ To save a user scale
1. Press bs.
2. Press 5.
3. While holding down cr, press a button from cn
to cq to select an area.
Selecting a Music Preset instantly changes the Digital Piano
to a preset setup (tone, rhythm, tempo, etc.) for play of songs
of various genres/categories. The press of a button sets up
the Digital Piano so those songs sound exactly the way you
thought they should.
• See the separate “Appendix” for a complete list of the 305
Music Presets that are available.
1. Hold down bt until the indicator shown below
appears on the display.
Preset number
■ To recall a user scale
Preset name
I LoveHe r
1. Press bs.
2. Press 5.
3. Use buttons cn to cq to select the user scale
you want to recall.
Lights
Using a User Scale for Auto Accompaniment
You can use the following procedure to apply a user scale to
Auto Accompaniment.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “OTHER” (page
E-6).
Flashes
OTHER
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
2. Use cl (10-key) to select the preset number you
want.
This will change the setup (tone, rhythm, etc.) of the
piano.
• At this time the Digital Piano will go into Auto
Accompaniment synchro start standby (page E-39).
• Pressing br, bs, or bt will return to the screen that was
displayed before you held down in step 1, above.
3. Play along on the keyboard with the
accompaniment.
display “AcompScl”.
4. Use the cl (10-key) [–] and [+] keys to select on
and off.
■ Saving Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
■ Maintaining Data in User Scale Memory
After you save data in user scale memory, it will remain there
as long as power is supplied to the piano. However, if you
disconnect the AC adaptor, data in user scale memory will be
deleted.
E-53
English
Using Music Preset
You can store up to four “user scales” configured by you in
memory for later recall when you need them.
Other Useful Digital Piano Functions
Type
number
Using the Arpeggiator
The Arpeggiator makes it possible to play an arpeggio pattern
automatically. There are 90 different arpeggio patterns from
which to choose in order to match the music you are playing.
• The Arpeggiator is controlled using the same button dk as
Auto Harmonize (page E-40). Because of this, these two
functions cannot be used at the same time.
Type Name
13-30
Up
Rising
31-48
Down
Falling
49-66
U/D A
Repeat pattern alternating
between rising and falling
(Type A)
67-84
U/D B
Repeat pattern alternating
between rising and falling
(Type B)
85-102
Random
Random arrangement of
notes of the pressed keys
1. Hold down dk until the Auto Harmonize or
Arpeggiator type number and type name appear
on the display.
• If you do not perform any operation for a few seconds,
the display will return to the previous screen
automatically.
Type number
Description
3. Press dk to turn on Arpeggiator.
Playing a chord on the keyboard will start arpeggio play.
• Press dk again to turn off Arpeggiator.
Type name
Due t
S t .GrPno
1
2. Use the cl (10-key) [–] and [+] keys to select the
Arpeggiator type you want.
Lit when on
• 01 through 12 are Auto Harmonize types (page E-40).
Do not select them when using the Arpeggiator.
Octave
1... Uses the actual notes played.
2... Uses the actual notes played plus the same notes one octave.
4... Uses the actual notes played plus the same notes three octaves.
• The tempo setting of the Arpeggiator is the same as that set
for the metronome (page E-10).
Sustaining an Arpeggio (Arpeggiator Hold)
1Up 1
Speed (The number of arpeggio notes per beat)
Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard keys.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “OTHER” (page
E-6).
2. Press cl (10-key) [7] (ENTER) key.
Ar
p
egH l d
3. Press the cl (10-key) [+] key to select the ON
setting.
E-54
Deleting User Song Data
You can use the following procedure to delete user song data
stored as song numbers 153 through 162.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “DELETE” (page
E-6).
Flashes
DELETE
Used memory (Unit: Kbytes)
Deleting All Data in Digital Piano
Memory
Use the following procedure when you want to delete sampled
sounds, user songs and all other data, except for recorded
songs, currently in Digital Piano memory.
• Performing this procedure also will delete protected
sampled sound data (page E-23). It is recommended
that you save important data to a memory card (page
E-56) or your computer’s hard disk (page E-62).
• This operation does not delete recorded song data.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “DELETE” (page
E-6).
Flashes
Remaining memory capacity
2. Press the cl (10-key) [7] (ENTER) key.
3. Press the cl (10-key) [6] (i) button twice.
DELETE
Used memory (Unit: Kbytes)
User song name
USERSONG
4. Use the cl (10-key) [–] and [+] keys to select the
user song you want to delete.
5. Press the cl (10-key) [7] (ENTER) key.
Remaining memory capacity
2. Press the cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “All Data”.
This displays a delete confirmation message.
Flashes
Su r e?
Al l
Da t a
6. Press the cl (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
4. Press the cl (10-key) [7] (ENTER) key.
This displays a delete confirmation message.
Su r e?
5. Press the cl (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
C
E-55
English
Other Useful Digital Piano Functions
Using a Memory Card
5
7
bs
ck
cl
bo
Your Digital Piano’s SD memory card slot
makes it possible for you to store record
memory and other data on a
commercially available SD memory card.
SD Memory Card and Card Slot
Precautions
● Supported SD Memory Cards
Your Digital Piano supports the use of memory cards up to 2
GB. Use of any SD memory card with greater capacity is not
supported. See the instructions that come with the SD
memory card for information about its capacity.
User data that can be saved and loaded
Data Type
File Name
Extension
Description
Sampled sound
(page E-17)
Sampled sound data
TW7
DW7*1
User rhythms
(page E-41)
Edited Auto
Accompaniment data
AC7
User songs
(page E-27)
Song data imported from
an external device (cannot CM2
be saved to an SD memory MID*2
card).
Recorded songs
(page E-46)
Recorded song data
SP7
SL7*3
User scale
memory
(page E-51)
Edited scale data
ST7
Registration
setups
(page E-44)
Tone and rhythm setup
settings
RM7
All data
Above data
AL7
*1: Sampled drum set sounds
*2: Standard MIDI file (format 0, 1)
*3: Data recorded playing along with built-in song
• Use only SD memory cards. Operation is not
guaranteed when any other type of memory card is
used.
E-56
• When using an SD memory card, make sure you
observe all of the precautions in the instructions that
come with it.
• SD memory cards have a write-protect switch that you
can use to protect against accidental deletion of data.
• Avoid using an SD memory card under the following
conditions. Such conditions can corrupt data stored on
the memory card.
• Areas subjected to high temperature, high humidity,
and corrosive gas
• Areas subjected to strong electrostatic charge and
digital noise
• Never touch the contacts of an SD memory card when
loading it or removing it from the piano.
• While data is being stored to or recalled from an SD
memory card, never perform any other Digital Piano
operation or remove the SD memory card. Doing so
can corrupt the data on the card and damage the card
slot.
• Never insert anything besides an SD memory card into
the card slot. Doing so creates the risk of malfunction.
• Electrostatic charge discharging from your fingers or
the SD memory card to the card slot can cause
malfunction of the Digital Piano. If this happens, turn
the piano off and then back on again.
• An SD memory card can become quite warm after very
long use in the SD memory card slot. This is normal
and does not indicate malfunction.
Using a Memory Card
• Note that the SD memory card must be oriented
correctly when you insert it into the SD memory card
slot. Trying to force the memory card into the slot can
damage the card and the slot.
1. With the top of the SD memory card facing
upwards (so you can see it), carefully insert the
card into the piano’s SD memory card slot (dq)
until stops with a click.
Formatting an SD Memory Card
• Before using an SD Memory card, first be sure to
format it on the piano.
• Before performing the procedure below, check to make
sure that the SD memory card does not contain any
data you might need.
• The SD memory card format performed by the piano is
a “quick format”. If you want to completely delete all of
the data on the card, format it on your computer or
using some other device.
1. Insert the SD memory card you want to format
into the piano’s card slot.
• Make sure that the write-protect switch of the SD
memory card is not in the write-protect position.
2. Press ck and 7 at the same time.
Front
2. Press the SD memory card into the card slot
and then release it.
This will cause the card to disengage and eject partially.
Pull the card out of the slot.
F o r ma t
3. Press the cl (10-key) [7] (ENTER) key.
This will display the format confirmation screen.
Su r e?
4. Press the cl (10-key) [+] (YES) key.
The message “Pls wait” will appear on the display. Do not
perform any operation while this message is displayed.
“Complete” appears on the display after formatting is
complete.
• To cancel the format operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
P l s wa i t
Comp l e t e
E-57
English
Inserting and Removing an SD
Memory Card
Using a Memory Card
Saving Digital Piano Data to an
SD Memory Card
Use the following procedure to save Digital Piano data to an
SD memory card.
4. Use the cl (10-key) [4] (u) and [6] (i) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To save this data
Display this screen
Sampled sound
“SAv” “SmplTone”
User rhythm
“SAv” “UserRhy.”
Recorded song
“SAv” “Rec.Song”
Recorded song
(SMF 0 format)
“SAv” “SMF 0”
Select the tone number of the sampled
sound you want to save.
User Scale Memory
“SAv” “ScaleMem”
Registration data
“SAv” “Regist.”
User rhythm
Select the rhythm number of the user
rhythm you want to save.
All data
“SAv” “All Data”
Recorded song
Select the song you want to save and
put the Digital Piano in playback
standby.
User scale
memory
Press bs and then 5.
Registration data
Select one of the Digital Piano’s default
built in tones or rhythms.
1. On the Digital Piano, select the data you want to
save as described below.
To save this type
of data
Sampled sound
Do this
Saving a recording made while playing along with a built-in
song in SMF 0 format will save only what was played on the
keyboard.
5. Press the cl (10-key) [7] (ENTER) key.
Flashes
All data
• You cannot save a user song (song data loaded from
an external device) to an SD memory card.
• See page E-56 for information about data types.
2. Insert a SD memory card into the piano’s card
slot.
3. Hold down ck until the button lights.
• To cancel data save, press ck again.
Example: Saving a sampled sound
Flashes
Smp l T o n e
USERNAME
• Enter the file name of the data you are saving. Use the
cl (10-key) [4] (u) and [6] (i) keys to move the
cursor to the character you want to change, and then
use [+] and [–] to change the character.
• Pressing [9] (EXIT) will return to the screen that was
displayed before you pressed [7] (ENTER).
6. Press the cl (10-key) [7] (ENTER) key.
This will save the data to the SD memory card.
Comp l e t e
• If there is a file with the same name already on the SD
memory card, a message will appear asking if you want
to overwrite it. Press the cl (10-key) [+] (YES) key to
overwrite, or [–] (NO) or [9] (EXIT) to cancel.
Re
E-58
p
l ace?
• You can input the following characters in a file name.
Loading Data from an SD Memory
Card into Digital Piano Memory
9
J
T
'
Use the following procedure to load data from an SD memory
card into Digital Piano memory.
• The Digital Piano displays the “~” character as “3”.
1. On the Digital Piano, select the data you want to
0
A
K
U
(
1 2 3
B C D
L M N
V W X
) - ^
4
E
O
Y
{
5 6
F G
P Q
Z S
} @
7
H
R
&
~
8
I
S
_
`
■ SD Memory Card Data (File) Storage Locations
The above procedure stores Digital Piano data in a folder
named “MUSICDAT” on the SD memory card.
• The “MUSICDAT” folder is created automatically when you
format the SD memory card on the Digital Piano (page
E-57).
• If you store a file in any location other than inside the
“MUSICDAT” folder, you will not be able to recall, delete, or
play the file on the Digital Piano. You also will not be able to
recall, delete, or play any file you store inside of a subfolder
you create inside the “MUSICDAT” folder.
• The message “No File” will appear on the display if you try
to perform a recall, delete, or play operation while there is
no file inside the “MUSICDAT” folder.
• Whenever you copy a file to the SD memory card that
you plan to recall on the Digital Piano, be sure to store
the file in the SD memory card’s “MUSICDAT” folder.
load as described below.
To load this type
of data
Do this
Sampled sound
Select the tone number of the sampled
sound you want to load.
User rhythm
Select the rhythm number of the user
rhythm you want to load.
User song
Select the song number of the song you
want to load.
Recorded song
Select the song you want to load and
put the Digital Piano in playback
standby.
User scale
memory
Press bs and then 5.
Registration data
Select one of the Digital Piano’s default
built in tones, songs, rhythms, etc.
All data
2. Insert the SD memory card that contains the
data into the piano’s card slot.
3. Hold down ck until the button lights.
• To cancel data load, press ck again.
4. Use the cl (10-key) [4] (u) and [6] (i) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To load this data
Display this screen
Sampled sound
“Lod” “SmplTone”
User rhythm
“Lod” “UserRhy.”
User song
“Lod” “UserSong”
Recorded song
“Lod” “Rec.Song”
User scale memory
“Lod” “ScaleMem”
Registration data
“Lod” “Regist.”
All data
“Lod” “All Data”
E-59
English
Using a Memory Card
Using a Memory Card
5. Press the cl (10-key) [7] (ENTER) key.
Flashes
********
• Pressing [9] (EXIT) will return to the screen that was
displayed before you pressed [7] (ENTER).
6. Use the cl (10-key) [–] and [+] keys to select the
data (file) you want to load.
7. Press the cl (10-key) [7] (ENTER) key.
This will load the data into Digital Piano memory.
Comp l e t e
• If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
message will appear. Press the cl (10-key) [+] (YES)
key to overwrite, or [–] (NO) or [9] (EXIT) key to cancel.
Re
p
l ace?
Deleting Data from an SD Memory
Card
Use the following procedure to delete data saved on an SD
memory card.
1. On the Digital Piano, select the data you want to
delete as described below.
To delete this
type of data
Do this
Sampled sound
Select the tone number of the sampled
sound.
User rhythm
Select the rhythm number of the user
rhythm.
User song
Select the song number of the user
song.
Recorded song
Select the song and put the Digital
Piano in playback standby.
User scale
memory
Press bs and then 5.
Registration data
Select one of the Digital Piano’s default
built in tones, songs.
All data
2. Insert a SD memory card into the piano’s card
slot.
3. Hold down ck until the button lights.
• To cancel data delete, press ck again.
4. Use the cl (10-key) [4] (u) and [6] (i) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To delete this type
of data
E-60
Display this screen
Sampled sound
“dEL” “SmplTone”
User rhythm
“dEL” “UserRhy.”
User song
“dEL” “UserSong”
Recorded song
“dEL” “Rec.Song”
User scale memory
“dEL” “ScaleMem”
Registration data
“dEL” “Regist.”
All data
“dEL” “All Data”
B
5. Press the cl (10-key) [7] (ENTER) key.
Flashes
********
• Pressing [9] (EXIT) will return to the screen that was
displayed before you pressed [7] (ENTER).
6. Use the cl (10-key) [–] and [+] keys to select the
number of the data (file) you want to delete.
7. Press the cl (10-key) [7] (ENTER) key.
This will display the delete confirmation screen.
Su r e?
8. Press the cl (10-key) [+] (YES) key.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
Comp l e t e
Playing Back Data from an SD
Memory Card
You can use the following procedure to play back user song
data (page E-56) directly from an SD memory card.
• Whenever you copy a file to the SD memory card that
you plan to play on the Digital Piano, be sure to store
the file in the SD memory card’s “MUSICDAT” folder
(page E-59).
1. Insert the SD memory card that contains the
data into the piano’s card slot.
2. Press ck.
This will display the file numbers and song names for the
data stored on the display.
3. Use cl (10-key) to select the song you want to
play.
4. Press bo.
This will start playback.
• Each press of bo starts and stops playback.
SD Memory Card Error Messages
For information about SD memory card error messages, see
page E-71.
E-61
English
Using a Memory Card
Connecting External Devices
7
cl
bp
Connecting a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data
from the Digital Piano to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Piano for playback.
Minimum Computer System Requirements
The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the piano to it.
• Operating System
Windows® XP (SP2 or later)*1
Windows Vista® *2
Mac OS® X (10.3.9, 10.4.11 or later, 10.5.2 or later)
*1: Windows XP Home Edition
Windows XP Professional (32- bit)
*2: Windows Vista (32- bit)
Connecting the Piano to Your Computer
• Make sure you follow the steps of the procedure below
exactly. Connecting incorrectly can make data send
and receive impossible.
1. Turn off the piano and then start up your
computer.
• Do not start up the music software on your computer
yet!
2. After starting up your computer, use a
commercially available USB cable to connect it
to the piano.
B connector
USB cable
(A-B type)
Digital Piano USB port
• USB port
• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.
A connector
Computer USB port
3. Turn on the piano.
• If this is the first time you are connecting the piano to
your computer, the driver software required to send and
receive data will be installed on your computer
automatically.
4. Start up your computer’s music software.
E-62
5. Configure the music software settings to select
one of the following as the MIDI device.
MIDI Settings
CASIO USB-MIDI : (For Windows Vista, Mac OS X)
USB Audio Device : (For Windows XP)
Keyboard Channel
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
• Be sure to turn on the piano first before starting up
your computer’s music software.
A keyboard channel is the channel used for sending Digital
Piano data to a computer. You can select the channel you
want for sending Digital Piano data to a computer.
• The keyboard channel setting range is 01 to 16.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “MIDI” (page E-6).
Flashes
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1 (GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this Digital Piano, see the
latest support information provided by the website at the
following URL.
http://world.casio.com/
MIDI
2. Press cl (10-key) [7] (ENTER) key.
Keybd Ch
3. Use the cl (10-key) [–] and [+] keys to change
the keyboard channel.
Navigate Channels
The navigate channels can be used to display only the notes
of a particular channel (part) as on-screen guide information
from among the note information of a tune sent from the
computer.
■ Specifying the Navigate Channels
From among the 16 available channels (numbered 1 to 16),
you can specify any two neighboring channels (such as 05
and 06) as navigate channels. The smaller numbered channel
is the navigate (L) channel, while the larger numbered
channel is the navigate (R) channel. Specifying the navigate
(R) channel will automatically configure the navigate (L)
channel as well.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “MIDI” (page E-6).
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “Navi. Ch”.
Nav i .
Ch
4. Use the cl (10-key) to specify the navigate (R)
channel.
This also will automatically configure the next lower
channel number as the navigate (L) channel.
B
E-63
English
Connecting External Devices
Connecting External Devices
■ Turning Off the Navigate Channel Sound and
Playing the Part on the Keyboard
You can turn off the sound on one or both of the navigate
channels and play the cancelled part on the keyboard
yourself.
1. Press bp to select the channel setting you want
to turn off.
Each press of bp cycles through settings (1) thorough (4)
described below.
• If you turn off one channel, you can play the cancelled
part on the keyboard using the same tone as the
channel you turned off. If you turn off both channels
(option (3)), what you play on the keyboard sounds
using the tone of the navigate (R) channel.
Local Control
There are times when exchanging data with a computer when
you may not want the Digital Piano to sound notes you play on
its keyboard. The local control setting lets you do just that.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “MIDI” (page E-6).
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “Local”.
Loca l
Selected channel indicator appears.
4. Use the cl (10-key) [–] and [+] keys to specify
the local control setting.
Accomp Out
Navigate (L)
Channel
Navigate (R)
Channel
OnOnSound screen Sound screen
Guide
Guide
(1) R only displayed
{
×
×
{
(2) L only displayed
×
{
{
×
(3) LR displayed
×
{
×
{
(4) LR nor displayed
{
{
{
{
Enabling the Accomp Out setting causes Auto
Accompaniment data to be sent to the computer.
1. Press 7 and then use the cl (10-key) [4] (u)
and [6] (i) keys to display “MIDI” (page E-6).
2. Press cl (10-key) [7] (ENTER) key.
3. Use the cl (10-key) [4] (u) and [6] (i) keys to
display “AcompOut”.
A c ompOu t
4. Use the cl (10-key) [–] and [+] keys to turn
Accomp Out on or off.
E-64
Storing and Loading Piano
Memory Data
You can transfer sampled sounds, recorded songs, and other
data in piano memory to a computer for storage. You also can
load standard MIDI file (SMF) data, and Auto Accompaniment
data you download from the CASIO website to the piano,
which greatly expands the Song Bank songs and Auto
Accompaniment patterns available to you.
A special Data Manager application is required in order to
transfer data to and from the piano.
• Since the accompaniment data is for other models, you
may experience some abnormalities when playing it on this
model.
• Any loaded data stored in piano memory will be deleted
if power from the AC adaptor is cut off for some
reason. Always make sure you back up all important
data by saving it to your computer’s hard disk or to an
SD memory card.
Data Types Supported for Data Transfer
The same types of data that you can store to or recall from an
SD memory card (page E-56) can be transferred to and from
the piano. Note, that recorded song data can be transferred to
a computer in the piano’s native format only. You cannot save
recorded song data to a computer as a standard MIDI file
(SMF format).
Downloading Data Manager
1. Go to the CASIO WORLDWIDE site at the
following URL.
http://world.casio.com/
2. At the site, select a geographic area or country.
3. After accessing the area site, navigate to the
minimum computer system requirements for
Data Manager for this product.
• You should be able to find a link to Data Manager
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter the
model name of this product and search for it.
• Note that site contents are subject to change without
notice.
4. Check if your computer system complies with
the minimum requirements for Data Manager.
5. Download Data Manager and its user’s guide to
your computer.
6. Follow the procedure in the user’s guide that
you downloaded in step 5 to install and use
Data Manager.
• You can download accompaniment data from the
Internet Data Expansion system of the CASIO MUSIC
SITE (http://music.casio.com/) and load it into the
memory of this Digital Piano. Note that there is not any
accompaniment data intended specifically for this
model, so you should use data for other models.
B
E-65
English
Connecting External Devices
Connecting External Devices
Connecting to Audio Equipment
This Digital Piano can be connected to commercially available
stereo, amplifier, or recording equipment, to a portable audio
player or other equipment.
Outputting Keyboard Notes to Audio
Equipment
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
standard plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the piano and external
device volume levels whenever turning power on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If keyboard notes sound distorted when they are
sounded from external audio equipment, lower the
piano’s volume setting.
Stereo standard plug
Audio equipment, amplifier,
etc.
Digital Piano PHONES/OUTPUT jack
Playing an External Device from the Piano
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
mini plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the piano when making connections. After
connecting, turn down the piano and external device
volume levels whenever turning power on or off.
• After connecting, turn on the external device and then
the Digital Piano.
• If notes are distorted when they are sounded on the
external device, lower the volume setting of the
external device.
Digital Piano AUDIO IN jack
Portable audio player, etc.
Stereo mini plug
E-66
English
Reference
Troubleshooting
Symptom
Action
Included Accessories
I can’t find something that should be here.
Carefully check inside all of the packing materials.
Power Requirements
Power will not turned on.
Correctly attach the AC adaptor (page E-7).
Display
On-screen keyboard keys or notes remain on the
display.
A Step Up Lesson is in progress and the Digital Piano is waiting for
you to play the next note in the song. To stop this from happening,
cancel the lesson (page E-30).
Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.
Sound
Nothing happens when I press any keyboard key.
• Adjust the main volume setting (page E-8).
• If there is no sampled sound in memory, nothing will play if you
press a keyboard key while a tone in the range of 671 to 675 is
selected (page E-17).
Nothing happens or notes do not play normally when
I play notes on the left side of the keyboard.
Press bp to disable chord input in the accompaniment keyboard area
(page E-36).
Nothing happens when I start an Auto
Accompaniment.
• With rhythms 190, and 192 to 200, nothing will sound until you play
a chord on the keyboard. Try playing a chord (page E-36).
• Check and adjust the accompaniment volume setting (page E-39).
• If there is no user rhythm stored in memory, Auto Accompaniment
will not start when you press bo while a rhythm in the range of 201
to 210 is selected (page E-41).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
Nothing happens when I start playback of a built-in
song.
• It takes a little time after you press the button until the song starts to
play. Wait for a moment for the song to start.
• Check and adjust the song volume (page E-26).
• If there is no user song stored in memory, song playback will not
start when you press bo while a song in the range of 153 to 162 is
selected (page E-27).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
The metronome does not sound.
• Check and adjust the accompaniment volume setting (page E-39).
• Check and adjust the song volume (page E-26).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
Notes keep sounding, without stopping.
Turn power off and then back on to initialize all Digital Piano settings
(page E-8).
Some notes are cut off while they are playing.
Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction. See “Maximum Polyphony” in the
“Tone List” in the separate “Appendix”.
The volume or tone setting I made has changed.
• Adjust the main volume setting (page E-8).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
Output volume does not change even though is
change my keyboard touch.
• Change the Touch Response setting (page E-9).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
E-67
Reference
Symptom
Action
This is due to system limitations. It does not indicate malfunction.
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
• Check and adjust the transpose (page E-14) and tuning settings
(page E-14).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
The reverb of notes seems to change suddenly.
• Check and adjust the reverb setting (page E-13).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-8).
Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.
While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page E-25).
Tone, rhythm, and other settings revert to their initial
defaults whenever you turn on the Digital Piano.
Though piano settings reset when you turn off the piano, you can save
setups to registration memory for instant recall whenever you need
them (page E-44).
Computer Connection
I can’t exchange data between the Digital Piano and
a computer.
E-68
• Check to make sure that the USB cable is connected to the Digital
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page E-62).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.
Reference
Model
Keyboard
Touch Response
Maximum Polyphony
English
Specifications
CDP-200R
88-key piano keyboard
3 types, Off
48 notes (24 for certain tones)
Tones
Built-in Tones
670
Sampling Tones
Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*
Up to 10 seconds
Functions
Layer, Split
Reverb
1 to 10, Off
Chorus
1 to 5, Off
Metronome
Beats per Measure
0, 2 to 6
Tempo Range
30 to 255
Song Bank
Built-in Songs
152
User Songs
Up to 10*
Step Up Lesson
Lessons
4 (Listen, Watch, Remember, Auto)
Lesson Part
L, R, LR
Functions
Music Challenge
Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation
20 notes
Auto Accompaniment
Built-in Rhythms
200
User Rhythms
Up to 10 (Accompaniment Edit)*
Registration
32 (4 setups × 8 banks)
Recorder
Real-time recording, playback
Keyboard Play
5 songs, 6 tracks
Playing Along with a
Built-in Songs
1 song (L, R, LR)
Memory Capacity
Approximately 12,000 notes (total for 6 songs)
Other Functions
Transpose
±1 octaves (–12 to +12 semitones)
Octave Shift
Upper/Lower ±2 octaves
Tuning
A4 = approx. 440 Hz ±100 cents
Scale Tuning
Scale Fine Tune, Quarter Tone, Preset Scales
Music Preset
305
One Touch Preset
200
Auto Harmonize
12 types
Arpeggiator
90 types
MIDI
16 multi-timbre received, GM Level 1 standard
Musical Information Function
Tone, Rhythm, Song Bank, numbers and names; staff notation, fingering, pedal operation,
tempo, measure and beat number, chord name, etc.
Pitch Bend Wheel
Pitch Bend Range
0 to 12 semitones
SD Memory Cards
B
Supported SD Memory Cards
2GB or less
Functions
SMF playback, file storage, file recall, file delete, card format
E-69
Reference
Inputs/Outputs
USB port
TYPE B
Sustain/Assignable jack
Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Phones/Output jack
Stereo standard jack
Output Impedance: 20Ω, Output Voltage: 1.5V (RMS) MAX
Audio In jack
Stereo mini jack
Input Impedance: 40kΩ, Input Sensitivity: 200mV
Mic In jack
Standard jack
Input Impedance: 3kΩ, Input Sensitivity: 10mV
Power Jack
12V DC
Power Supply
AC Adaptor
Speakers
Output
Power Consumption
AD-12
(12cm × 6cm oval) × 2
8W + 8W
12V = 18W
Dimensions
133.3 × 27.8 × 13.3cm (52 1/2 × 10 15/16 × 5 1/4 inch)
Weight
Approximately 12.0kg (26.4 lbs)
• Design and specifications are subject to change without notice.
* This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).
Operating Precautions
Be sure to read and observe the following operating precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video
interference of a nearby device.
■ User Maintenance
• Never use benzene, alcohol, thinner, or other chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.
Wring all excess moisture from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric
shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not
cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the
volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using
headphones.
E-70
Reference
Display
Message
Cause
Action
Err CardFull
There is not enough room available on the SD
memory card.
• Delete some of the files on the SD memory card to
make room for new data (page E-60).
• Use a different SD memory card.
Err Card R/W
The SD memory card is damaged.
Use a different SD memory card.
Err Convert
There is not enough unused memory available to
save recorded song data to an SD memory card as
an SMF 0 format file.
Delete some or all of the following user data from
memory to make room for new data.
Sampled sounds (page E-16), user rhythms (page
E-41), user songs (page E-27)
Err Exist
A sampled drum set sound cannot be copied (page
E-21) to a keyboard key because the key already has
a sampled sound assigned to it.
• Delete the sampled sound that is currently assigned
to the key you are copying to (page E-21).
• Copy the sampled sound to another key that does not
yet have a sampled sound assigned to it.
Err Format
1. The format of the SD memory card is not
compatible with this piano.
1. Format the SD memory card (page E-57).
2. The SD memory card is damaged.
2. Use a different SD memory card.
Err Limit
The tone number you selected before starting
sampling already has the allowable maximum of eight
sampled sounds assigned to it.
• Delete the one or more of the sampled sounds
currently assigned to the tone number (page E-21).
• Select another tone number that has less than eight
sampled sounds currently assigned to it (page E-19).
Err Mem Full
1. There is not enough memory available to play back Delete some or all of the following user data from
song data from an SD memory card.
memory to make room for new data.
Sampled sounds (page E-16), user rhythms (page
2. There is not enough memory available for
E-41), user songs (page E-27)
sampling or Auto Accompaniment editing.
Err No Card
1. The SD memory card is not set correctly in the
card slot.
1. Remove the memory card and reinsert it correctly
(page E-57).
2. The SD memory card was removed part way
through a card access operation.
2. Never remove a SD memory card from the card slot
while a card access operation is in progress.
Err No Data
There is no data in the selected user area (tone,
rhythm, song number, etc.)
Select a piano user area that contains data.
Err No File
There is no folder named “MUSICDAT” on the SD
memory card.
• Use a computer to create a folder named
“MUSICDAT” on the SD memory card (page E-59).
• Format the SD memory card on the Digital Piano
(page E-57).
Err NotSMF01 You are attempting to play back SMF Format 2 song
data.
Playback of SMF Format 0 or 1 only is supported.
Err Protect
1. The SD memory card is write protected.
1. Adjust the SD memory card’s write protect switch to
enable data storage.
2. Sampled sounds (Tone Numbers 671 to 678) are
protected.
2. Unprotect one or more of the sampled sounds, which
will allow it to be overwritten or deleted.
Err ReadOnly
You are attempting to save a file using the same
name as an existing read-only file.
• Save the new file to a different card or use another
name.
• Remove the read-only attribute of the exiting file on
the SD memory card and try again.
• Use a different SD memory card.
Err SizeOver
1. The song data on the SD memory it too big to play
back.
1. This piano can play back song data files with a
maximum size of about 320Kbytes.
2. Auto Accompaniment editing cannot be performed
because the accompaniment pattern or instrument
part data is too large.
2. Select a different accompaniment pattern or
instrument parts.
Err WrongDat 1. The data on the SD memory card is corrupted.
—
2. The data on the SD memory card is a type that is
not supported by this piano.
E-71
English
Error Messages
Reference
Song List
SONG BANK
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
E-72
WORLD
TWINKLE TWINKLE LITTLE STAR
LIGHTLY ROW
LONG LONG AGO
ON TOP OF OLD SMOKEY
SAKURA SAKURA
WHEN THE SAINTS GO MARCHING IN
AMAZING GRACE
AULD LANG SYNE
COME BIRDS
DID YOU EVER SEE A LASSIE?
MICHAEL ROW THE BOAT ASHORE
DANNY BOY
MY BONNIE
HOME SWEET HOME
AURA LEE
HOME ON THE RANGE
ALOHA OE
SANTA LUCIA
FURUSATO
GREENSLEEVES
JOSHUA FOUGHT THE BATTLE OF JERICHO
THE MUFFIN MAN
LONDON BRIDGE
UNDER THE SPREADING CHESTNUT TREE
SIPPIN’ CIDER THROUGH A STRAW
GRANDFATHER’S CLOCK
ANNIE LAURIE
BEAUTIFUL DREAMER
IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR
HANDS
MY DARLING CLEMENTINE
LITTLE BROWN JUG
HOUSE OF THE RISING SUN
SHE WORE A YELLOW RIBBON
YANKEE DOODLE
MY OLD KENTUCKY HOME
SZLA DZIEWECZKA
TROIKA
WALTZING MATILDA
ON THE BRIDGE OF AVIGNON
I’VE BEEN WORKING ON THE RAILROAD
OH! SUSANNA
CAMPTOWN RACES
JEANNIE WITH THE LIGHT BROWN HAIR
TURKEY IN THE STRAW
JAMAICA FAREWELL
EVENT
SILENT NIGHT
WE WISH YOU A MERRY CHRISTMAS
JINGLE BELLS
JOY TO THE WORLD
O CHRISTMAS TREE
PIANO/CLASSICS
MARY HAD A LITTLE LAMB
LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”
JE TE VEUX
SONATA op.13 “PATHÉTIQUE” 2nd Mov.
HEIDENRÖSLEIN
056
057
058
059
060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
AIR FROM “SUITE no.3”
SPRING FROM “THE FOUR SEASONS”
HABANERA FROM “CARMEN”
BRINDISI FROM “LA TRAVIATA”
HUNGARIAN DANCES no.5
MINUET IN G MAJOR
MUSETTE IN D MAJOR
GAVOTTE (GOSSEC)
ARABESQUE (BURGMÜLLER)
CHOPSTICKS
DECK THE HALL
ODE TO JOY
AVE MARIA (GOUNOD)
SONATINA op.36 no.1 1st Mov.
PRELUDE op.28 no.7 (CHOPIN)
RÊVERIE
GYMNOPÉDIES no.1
GOING HOME FROM “FROM THE NEW WORLD”
FÜR ELISE
TURKISH MARCH (MOZART)
SONATA op.27 no.2 “MOONLIGHT” 1st Mov.
ETUDE op.10 no.3 “CHANSON DE L’ADIEU”
THE ENTERTAINER
WEDDING MARCH FROM “MIDSUMMER NIGHT’S
079
DREAM”
080
AMERICAN PATROL
081
FRÖHLICHER LANDMANN
082
LA CHEVALERESQUE
083
SONATA K.545 1st Mov.
084
LA PRIÈRE D’UNE VIERGE
085
VALSE op.64 no.1 “PETIT CHIEN”
086
LIEBESTRÄUME no.3
087
JESUS BLEIBET MEINE FREUDE
088
CANON (PACHELBEL)
089
SERENADE FROM “EINE KLEINE NACHTMUSIK”
090
MARCH FROM “THE NUTCRACKER”
091
INVENTIONEN no.1
092
PRAELUDIUM no.1 (J.S.BACH)
093
SONATINE op.20 no.1 1st Mov.
094
HUMORESKE (DVO ÁK)
095
DOLLY’S DREAMING AND AWAKENING
096
LA FILLE AUX CHEVEUX DE LIN
097
ARABESQUE no.1 (DEBUSSY)
098
TRÄUMEREI
099
MAPLE LEAF RAG
100
NOCTURNE op.9 no.2 (CHOPIN)
EXERCISE
101 - 150 EXERCISE I / II / III
DEMO TUNES
151 - 152 DEMO TUNES
USER SONGS
153 - 162 USER SONGS
B
Root
m6
6
69
dim7
mM7
madd9
add9
7sus4
7b5
m7b5
M7
m7
7
sus2
sus4
aug
dim
m
M
Chord
Type
C
Chord Chart
C#/(Db)
D
(D#)/Eb
E
F
F#/(Gb)
G
(G#)/Ab
A
(A#)/Bb
English
B
Reference
E-73
B
Key’s
Ch’s
After
Touch
Control
Change
Pitch Bender
Note ON
Note OFF
Velocity
True voice
0, 32
1
6, 38
7
10
11
64
O
X
O *2
O
O
X
O *4
O
X
X
O 9nH v = 1 - 127
X 9nH v = 0
0 - 127
Mode 3
X
Default
Messages
Altered
Mode
Note
Number
1
1 - 16
Default
Changed
Transmitted
O (MSB only)
O
O *3
O
O
O
O
O
X
O
O 9nH v = 1 - 127
X 9nH v = 0, 8nH V =**
0 - 127
0 - 127 *1
Mode 3
X
1 - 16
1 - 16
Recognized
MIDI Implementation Chart
Basic
Channel
Function
Model: CDP-200R
Bank select
Modulation
Data entry
Volume
Pan
Expression
Hold 1
**: no relation
**: sin relación
Remarks
Version : 1.0
B
:True #
: Clock
: Commands
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
System
Real Time
Aux
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Remarks
Messages
: Song Pos
: Song Sel
: Tune
System
Common
System Exclusive
Program
Change
66
67
91
93
100, 101
120
121
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O
O
O
O
O *3
O
O
Sostenuto
Soft pedal
Reverb send
Chorus send
RPN LSB, MSB
All sound off
Reset all controller
O : Yes
X : No
Depende del tono.
RPN : Sensibilidad a la inflexión de altura tonal
RPN : Sensibilidad a la inflexión de altura tonal, afinación precisa, afinación aproximada
De acuerdo con el ajuste de efecto de pedal.
Mensajes exclusivos de sistema universal :
Afinación maestra precisa, afinación maestra aproximada, tiempo de reverberación,
Tipos de coros
*6: Mensajes exclusivos de sistema universal :
Sistema GM activado/desactivado, sistema GM2 activado, volumen general, afinación
maestra precisa, afinación maestra aproximada, tiempo de reverberación, tipo de coro,
tasa de modulación al coro
*7: Mensaje exclusivo del sistema de este modelo
• Si desea información sobre las notas al pie de página 2, 3, 5, 6, 7, consulte
Implementación MIDI en http://world.casio.com/
*1:
*2:
*3:
*4:
*5:
X
O
O
X
X
X
X
X
X
O *6 *7
O 0 - 127
*1: Depends on tone.
*2: RPN : Pitch Bend Sensitivity
*3: RPN : Pitch Bend Sensitivity, Fine Tune, Coarse Tune
*4: In accordance with pedal effect setting.
*5: Universal System Exclusive Messages :
Master Fine Tuning, Master Coarse Tuning, Reverb Time, Chorus Type
*6: Universal System Exclusive Messages :
GM System On/Off, GM2 System On, Master Volume, Master Fine Tuning, Master
Coarse Tuning, Reverb Time, Chorus Type, Chorus Modulation Rate
*7: This model’s System Exclusive Message
• For details about footnotes 2, 3, 5, 6, 7, see MIDI Implementation at
http://world.casio.com/.
X
O
X
X
O
O
X
X
X
O *5
O 0 - 127
O *4
O *4
X
O
O *2
X
O
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
C
MA0811-C Printed in China
CDP200RES1C