(1)

(2)

(4)

(5)

(8)

(3)

(13)

(14)

VINTAGE TIME MACHINE VM1

Vintage Analog Delay/Echo/Chorus/Vibrato

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE TIME MACHINE VM1.

This high-quality classic effect delivers true analog delay with up to 450 ms of organic echo to rival any tape delay, vibrant chorus and mind-bending vibrato.

1. Controls

(12)

(7)

(6)

(10)

(9)

(11)

(1)

Use the 9 V_ connection to plug in a 9 V power supply.

(2)

Use the POWER switch to activate/deactivate the unit.

(3)

The POWER LED lights up when the unit is activated.

(4)

The ¼" TS EFFECT OUT connector sends the signal to your amp.

(5)

The ¼" TS DIRECT OUT connector always provides the direct, unaffected signal to feed for example a separate guitar amp.

(6)

Use this ¼" TS INPUT connector to plug in the instrument cable.

(7)

The CHORUS/VIBRATO switch selects between chorus or vibrato effect.

(8)

The LEVEL control adjusts the input level. The LEVEL control adjusts the input level.

(9)

The OVERLOAD LED illuminates when the input signal is too high. In this case reduce the input level with the LEVEL control.

(10)

The MIX control adjusts the balance between the effect signal and the direct signal.

(11)

The FEEDBACK control determines the amount of signal repetitions. Since the output signal is fed back to the input of the delay line, it is possible to generate a self oscillation at high settings of this control.

(12) The DELAY control adjusts the time between the direct signal and the signal repetitions (Delay Time).

(13) The CHORUS/VIBRATO control adjusts the effects speed of the modulation effect added to the delay. Slow settings produce a chorus effect while fast settings provide vibrato.

(14)

Use the footswitch to activate/deactivate the effect.

The SERIAL NUMBER is located on the underside.

VINTAGE TIME MACHINE VM1

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specifications

In

Connector

Impedance

Effect Out

Connector

Impedance

¼" TS

100 kΩ

¼" TS

1 kΩ

Direct Out

Connector

Impedance

¼" TS

100 kΩ

Power Supply

9 V 𝌂, 100 mA (included)

BEHRINGER PSU-SB

Power connector 2 mm jack, negative center

Power consumption 50 mA

Physical/Weight

Dimensions

(H x W x D)

Weight approx. 61 x 220 x 172 mm approx. (2.4 x 8.7 x 6.7") approx. 1.34 kg (2.95 lbs)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK,

MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.

MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION,

PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH

AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND

MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE,

WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay,

P.O. Box 146, Road Town, Tortola, British Virgin Islands

FEDERAL COMMUNICATIONS

COMMISSION COMPLIANCE INFORMATION

VINTAGE TIME MACHINE VM1

Responsible Party Name:

Address:

Phone Number:

MUSIC Group Services US Inc.

18912 North Creek Parkway,

Suite 200 Bothell, WA 98011,

USA

Phone: +1 425 672 0816

VINTAGE TIME MACHINE VM1 complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user’s authority to use the equipment.