Whirlpool Petite Portable Pedicure Spa Specifications

EUROPEAN TOUCH - LIMITED CONDITIONAL* WARRANTY
European Touch Holdings, Inc. ("European Touch") conditionally warrants your whirlpool pedicure
spa (the "Pedicure Spa") in accordance with the terms and conditions set forth below for a period
of one (1) year commencing on the original date of shipment of the Pedicure Spa to you. The
warranty only applies to the Pedicure Spa's original end-user owner or customer (the "Customer").
This Conditional Warranty is non-transferable and replaces any warranties previously
published by European Touch.
If examination of the Pedicure Spa by European Touch during the applicable warranty period
shows it to have a defect in material or workmanship, European Touch will, at its option, repair or
replace the defective component or part thereof. Further, European Touch may, at its discretion,
replace a defective component or part with a refurbished component or part, or may replace the
Pedicure Spa with a refurbished pedicure spa. If European Touch elects to replace the Pedicure
Spa, the replacement pedicure spa must be comparable in style and size to the Pedicure Spa.
The Customer shall bear all charges incurred for the shipment to it of replacement components or
parts, or a replacement pedicure spa, and the cost of all labor incurred in repairing defects in the
Pedicure Spa or repairing or replacing any of its defective components or parts.
The foregoing limited warranty does not apply:
• To the Pedicure Spa, or any components or parts thereof, if subjected to misuse or neglect
or if accidentally or intentionally damage.
• To the Pedicure Spa, or any components or part, if altered or modified in any way.
• To any expenses incurred by the Customer or any third party, including labor or material,
during investigation, removal or reinstallation of the Pedicure Spa or any defective
components or parts.
• To any damage to or impairment of the Pedicure Spa, or any components or parts thereof,
caused by any casualty, including without limitation, accident, fire, wind, floods, acts of
nature or attempted theft.
• To any workmanship of a fabricator (other than European Touch) or installer of the Pedicure
Spa.
• If damage to pump parts and/or motor parts is due to obstructed plumbing.
• If the Pedicure Spa is removed from its place of initial installation.
• To staining, fading, or discoloration of any portion of the Pedicure Spa caused by water
additives or improper water treatment.
• To staining, fading or discoloration of the Pedicure Spa's upholstered seat, armrests or
footrests.
• To malfunctions or damage caused by improper installation of the Pedicure Spa, including,
but not limited to, failure to meet local, state, or local plumbing, electrical and building codes.
• To damage resulting from a person standing in the Pedicure Spa's basin or other similar
stress to that basin.
• To freight damage.
• To damage incurred to the Pedicure Spa while in possession of any party other than
European Touch.
This forgoing conditional limited warranty is also conditional upon:
• The Pedicure Spa being installed by a licensed professional in accordance with European
Touch's installation instructions.
• The proper use of cleaning and sanitizing solutions in accordance with the manufacturer’s
instructions, or state board. It must be noted that repeated use of concentrated sodium
hypochlorite solutions (chlorine beach), concentrated ether solutions, or acetone will
damage chrome and plumbing components and will void the limited warranty on those parts.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 2
•
•
•
European Touch recommends that you thoroughly read labels and use sanitizing products
void of these chemicals.
Use of this pedicure spa for functions it was not created for, including, but not limited to,
ionic detox or any process that operates by reverse electroplating; this use will destroy
plated parts and void the warranty.
Shipment, if requested, to European Touch of Pedicure Spa parts or components thought to
be defective. Parts or components may only be returned if authorized in advance by
European Touch. All returns must be freight prepaid.
Determination by European Touch, in its reasonable discretion, that there exists a defect in
material or workmanship.
Repair or replacement of any part or component under this Limited Warranty, or furnishing a
replacement pedicure spa, shall not extend the duration of the warranty with respect to such
repaired or replaced part beyond the stated warranty period. When a part or component is
replaced, it will be under warranty for 90 days, or for the remaining life of original warranty,
whichever period is greater.
Customer agrees by using the Pedicure Spa that
• THE OBLIGATION OF EUROPEAN TOUCH SHALL NOT EXTEND TO INDIRECT OR
CONSEQUENTIAL DAMAGES OR INJURY WHICH MAY RESULT FROM SUCH USE
• that the obligations of European Touch are limited to those set forth herein
• this warranty is limited to the original owner/end-user and is non-transferable
• European Touch shall not be liable for any other obligations or liabilities, including, but not
limited to: obligations or liabilities arising out of breach of contract or warranty, negligence,
or other tort or any theory of strict liability with respect to the Pedicure Spa or parts or
components thereof or any acts or omissions of European Touch
• Any assistance European Touch provides to the Customer outside of terms, limitations, or
exclusions of this limited warranty will not constitute a waiver of any of the foregoing terms,
limitations, or exclusions, nor will such assistance extend or revive the warranty.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESS OR
IMPLIED, AND ALL SUCH OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS LIMITED WARRANTY.
NO DEALER OR OTHER PERSON HAS ANY AUTHORITY TO BIND EUROPEAN TOUCH TO
CHANGES OR ADDITIONS TO THIS WARRANTY OR ITS PRODUCTS. ACCORDINGLY,
EUROPEAN TOUCH IS NOT RESPONSIBLE FOR ANY SUCH OUTSIDE WARRANTIES OR
REPRESENTATIONS.
IN NO EVENT SHALL EUROPEAN TOUCH BE LIABLE IN ANY WAY FOR ANY
CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OF ANY NATURE WHATSOEVER,
OR FOR ANY AMOUNTS IN EXCESS OF THE SELLING PRICE OF THE PEDICURE SPA OR
ANY COMPONENTS OR PARTS THEREOF FOUND TO BE DEFECTIVE. THIS LIMITED
WARRANTY GIVES THE CUSTOMER SPECIFIC LEGAL RIGHTS. THE CUSTOMER MAY
ALSO HAVE OTHER RIGHTS WHICH MAY VARY BY EACH JURISDICTION.
Should your Pedicure Spa require service due to a defect or malfunction, please contact:
European Touch – Technical Support
800.626.6912 | 414.357.7016 | f: 414.357.6360
email: service@europeantouch.com
website: www.europeantouch.com
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 3
INSPECTION OF THE PETITE SPA™
Inspect the Petite Spa™ and packaging. If any damage to the Petite Spa™ or its packaging is
visible, please contact your local Petite Spa™ reseller or call European Touch Customer
Support at 800-626-6912.
IMPORTANT INFORMATION
Serial Number:
Work Order Number:
Installed By:
Installation Date:
The serial number is located on a white
label on the power cord of the Petite Spa™.
The work order (WO) is located on the UL
label. The UL label is located next to where
the power cord enters the Petite Spa™.
Do not remove the tags from the electrical cord.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 4
TABLE OF CONTENTS
EUROPEAN TOUCH - LIMITED CONDITIONAL* WARRANTY........................................... 2
INSPECTION OF THE PETITE SPA™ ........................................................................... 4
IMPORTANT INFORMATION ..........................................................................................................4
INTRODUCTION ...................................................................................................... 6
PRECAUTIONS ...........................................................................................................................6
VERY IMPORTANT! DO NOT STAND IN TUB!..................................................................................6
RECEIPT & INSPECTION ..............................................................................................................6
WARNING..................................................................................................................................6
PETITE SPA™ SPECIFICATIONS ............................................................................... 7
PARTS & CONTENTS .............................................................................................. 8
PETITE SPA™ OPERATING INSTRUCTIONS ................................................................ 9
ELECTRICAL OUTLET .................................................................................................................9
FILLING AND RUNNING THE PETITE SPA™ ....................................................................................9
DRAINING THE PETITE SPA™ ....................................................................................................11
PETITE SPA™ - CLEANING AND DISINFECTING PROCEDURES.................................... 13
REMOVAL / REPLACING JET PARTS ...........................................................................................14
PEDICURE PRODUCT GUIDELINES .......................................................................... 15
800-626-6912
414-357-7016
Fax: 1-414-357-6360
etservice@europeantouch.com info@europeantouch.com
www.europeantouch.com
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 5
INTRODUCTION
European Touch sincerely thanks you for your spa purchase! The Petite Spa™ (herein called
pedicure spa) has been developed and is manufactured by European Touch. This innovative
whirlpool pedicure spa has been designed to serve you dependably for many years. Please
take time to read through this entire manual before installation and use.
Please read and follow instructions carefully!
PRECAUTIONS
♦ Excessive water temperature is dangerous and should be checked before use.
Maximum temperature of the water inside the pedicure spa tub should never exceed
100 degrees Fahrenheit.
VERY IMPORTANT! DO NOT STAND IN TUB!
♦ The pedicure spa has been designed to massage the feet and toes with gentle water
movement. The tub is not intended to be stood in. Standing in tub may cause severe
damage to the unit as well as possible serious injury to the person. Never bring and/or
operate any electrical devices into or near the pedicure spa.
RECEIPT & INSPECTION
♦ Thoroughly inspect each shipment immediately upon arrival. It is important that you
notify the driver of any damage and insist on a notation directly on the face of the freight
bill. Failure to note damage on the face of the freight bill may impede and/or prevent
any claims that you may have against the carrier. If concealed loss or damage is found,
you must notify the carrier at once and request an inspection. Do not discard the
shipping carton. If you give the carrier a clear receipt for goods that have been
damaged in transit, you do so at your own risk and expense.
WARNING
♦ Individuals experiencing pain or discomfort… Discontinue use of spa immediately
and consult a physician.
♦ Diabetics and individuals whom have poor circulation… Consult a physician before
using.
♦ Individuals whom have any kind of fungal infection, swelling, fracture, or persistent pain
or if any areas of their feet or legs are inflamed or have open wounds… Do not use the
spa.
•
European touch reserves the right to make changes in product characteristics,
packaging, colors, and design at anytime without notice.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 6
PETITE SPA™ SPECIFICATIONS
Overall Dimensions:
27 1/2”L (70.5cm) x 27”W (70cm) x
19”H (48cm)
Shipping Dimensions: 36”L (93cm) x 42”W (109cm)
x 27”H (70cm)
Empty Weight:
55lbs. (24kg) Filled Weight:
95lbs. (43kg)
UPS Shipping Weight: 99lbs. (44.8kg)
Capacity of Tub:
5.4 U.S. gallons (20.4L)
Whirlpool Pump Motor: 1/2 HP, 110V, 60HZ (220 volt
and T-Mark voltages also
available)
Power Source:
110V AC / 5Amp, 60HZ
(GFCI Protected)
Caution: Pedicure spa must conform to all local and national electrical codes.
Construction:
Linear Low Density Polyethylene (LLDPE), self-contained, pre-plumbed
Hydro-Therapeutic Jet System: PVC, two (2) fully-directional jets, built-in air control
Electrical Switches:
One (1) push ON/OFF, air-activated safety switch for whirlpool pump
Fill & Drain Hoses:
1/2” ID x 7’ (213cm), braided nylon, brass fittings, plastic quick-disconnects
UL Listed • CE Certified: Complies with ASME/ANSI Whirlpool Bathtub Specs.
ASME/ANSI
A112.19.7M-1995 and A112.19.8M-1995
Limited Warranty:
One (1) year from date of shipment, Whirlpool Pump Two (2) years.
.
Due to our policy of continuous improvements, all specifications are subject to change without notice.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 7
PARTS & CONTENTS
Item, Part Number, & Description
1 multi
Petite Shell
10
01150006
Suction Pipe Assembly
2 01010023
Footrest – Center
11
01150002
Discharge Valve Assembly
3 01010021
Petite Tub Cover
12
01150004
Jet Sub-Assembly
4 01010031
Footrest – Left Side
13
01010020
Spill Tray
5 01010032
Footrest – Right Side
14
01130003
5/16 X Bolt
6 01130006
Rivet – Aluminum 12
15
01130005
5/16 Locknut
7 030130002
Air Button
16
01040002
Whirlpool pump
8 03010008
Suction Cover
17
01130002
Front Caster – Locking
9 03010010
Suction Head Guard
17A 01130010
Doc ID: 01080001
Revision: F
Rear Caster – Non-Locking
Technical Support: 800-626-6912
Page 8
PETITE SPA™ OPERATING INSTRUCTIONS
ELECTRICAL OUTLET
Your Petite Spa™ should be conveniently located near adequate utilities during use. A 115v,
60hz GFCI protected outlet must be used. Do not operate the pedicure spa without GFCI
protection. The Petite Spa™ is also available in a 100v and 220v version. Warning: Do not use
extension cords with the pedicure spa.
FILLING AND RUNNING THE PETITE SPA™
1
Replace the faucet aerator with the faucet
adaptor included in the hose kit.
2
Screw the white quick connect adaptor into
the blue female hose. Connect the adaptor
to the faucet by sliding the white sleeve
down while sliding the connector onto the
faucet adaptor.
3
The discharge valve is located at the bottom
of the spa. Make sure that the valve is
closed before filling with water.
4
The discharge valve is closed when the
valve handle is horizontal.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 9
5
Fill the spa with warm water. It is not
recommended that the water temperature
exceeds 100 degrees F.
6
Fill the tub with water to the wavy line on the
tub wall.
7
The on/off button is located underneath the
footrest. Push it once to start the spa, push
it again to stop the spa.
8
Doc ID: 01080001
Adjust the pressure of the jets by turning the
round adjusting cover on each jet. To adjust
the direction of the water flow, move the jet
eyeball located in the center of the jet
assembly.
Revision: F
Technical Support: 800-626-6912
Page 10
DRAINING THE PETITE SPA™
1
Close the jets by turning the adjusting cover
clockwise, so that no water flows through the
jets.
2
Turn the spa off by pushing the on/off button
located under the footrest.
3
Screw the orange disconnect adapter to the
male hose. Slide the orange quick connect
onto the discharge valve. Make sure that the
connection is secure.
4
Route the discharge hose into a drain or sink.
5
Open the discharge valve by turning the
handle so that it is straight with the discharge
valve.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 11
6
Make sure the hose is secure, and then turn
the spa on by pushing the on/off button
located under the footrest.
7
Run the pump until the water stops draining
out of the hose. It is normal for a low volume
of water to run out of the jets while the spa is
draining.
8
Turn the spa off by pushing the on/off button
located under the footrest.
9
Close the discharge valve handle and
disconnect the drain hose from the discharge
valve.
Pull the drip pan out about halfway and
slowly open the discharge valve. Drain the
remaining water into the drip pan and pour
the water into a drain or sink. Repeat this
until there is no more water draining out.
Once this is done, close the discharge valve
handle.
10
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 12
PETITE SPA™ - CLEANING AND DISINFECTING PROCEDURES
Always check with your state board for required cleaning and disinfecting procedures.
It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last
pedicure of the day, and once a week for overnight cleaning. Regular cleaning will help keep your
pedicure spa in good working condition. Proper and continuous cleaning will kill harmful bacteria and
germs that can cause infection.
To clean the pedicure spa, follow these easy steps:
After Each Pedicure:
1. Drain water from the pedicure spa by turning the drain handle to the “Open” position. Remove
all debris.
2. Clean all the surfaces of the basin and all components. Use low-sudsing soap or detergent, and
a non-abrasive brush. Remove all visible residue from basin and then rinse with the sprayer.
3. Disinfect all surfaces and components with an EPA registered disinfectant in accordance with
your state board requirements. *EPA disinfectants require ten-minute contact.
4. Rinse off with clean water using the sprayer and wipe all parts dry with clean towel.
After Last Pedicure of the Day:
1. Drain water from the pedicure spa by turning the drain handle to the “Open” position. Remove
all debris.
2. Remove the following:
a. Drain cover as shown on page 21.
b. Suction cover as shown on page 20.
c. Jets as shown on page 20.
3. Remove all debris then wash each component with low-sudsing soap, or detergent, using a soft
brush. Disinfect the components as well as the areas behind them with an EPA registered
disinfectant. Follow your state board requirements for disinfecting. Replace all components.
4. Clean all the surfaces of the basin using low–sudsing soap or detergent, and a non-abrasive
brush. Remove all visible residue from basin and then rinse with sprayer.
5. Fill basin with clean warm water to the fill line.
6. Pour into the basin three teaspoons of low-foaming dishwasher crystals (not gel) and 1 ounce
of household bleach for up to six gallons of water.
Follow your state board requirements as they may differ from the above step.
7. Turn on the whirlpool jets and let run for ten minutes.
8. Turn the jets off and drain water from the basin.
9. Rinse the basin and all other components with clean water using the sprayer.
10. Refill the basin with clean water. Turn the jets on and run for one minute.
11. Drain water from the basin and turn off the whirlpool jets. Then wipe dry with a clean towel.
12. Make a record of the date and time of this cleaning and disinfecting.
Once a Week Overnight Cleaning:
In addition to the daily cleaning, the following cleaning procedures must be done every week.
1. Follow steps one through seven as listed above as in “After Last Pedicure of the Day.”
2. Turn jets off after ten minutes and let solution sit over night in basin (six to ten hours).
3. The next morning drain, rinse, and wipe dry with a clean towel.
4. Make a record of the date and time of this cleaning and disinfecting.
CAUTION: Cleaning products that contain abrasives can damage the pedicure spa. Use ONLY
non-abrasive products to clean the pedicure spa.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 13
REMOVAL / REPLACING JET PARTS
Tools required:
Pliers
7/8" deep well socket with extension
Check your state and local regulations for cleaning procedures. Links to your state boards can
be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page
headed “Cleaning your Petite Spa™,” page 12, for cleaning recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1: Remove the jet eyeball using the Step 3: Remove the jet nozzle and nut using a
pliers. Pull forward with a quick tug.
7/8" deep-well socket and extension.
Clean this area, using low
foaming
soap
and
disinfectant, with a brush.
Remove all visible residue
and rinse with clean water.
Step 2: Remove the adjusting cover. Step 4: For cleaning, refer to “Cleaning your
This should pull out.
Petite Spa™” on page 12. Reassemble the jet
assembly. The jet nozzle nut should be hand
tightened using the socket with extension. If the
adjustment cover is hard to turn, slightly loosen
the jet nozzle nut.
Step 5: Reverse steps to reassemble.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 14
PEDICURE PRODUCT GUIDELINES
Because there are so many different products on the market, it is difficult for us to list all of the
pedicure products that are safe to use in our spas. However, the following guidelines can be
used:
♦ It has been determined that products containing dissolving abrasives (such as sea salts)
will not harm the internal component structure of your pedicure spa as long as the entire
European Touch care and maintenance guideline are followed without deviation.
♦ Do not use vegetable oil based products in the pedicure spa as they will degrade parts
over time.
♦ Do not use any products containing a foaming agent; this will cause excessive foam.
♦ Always use pedicure products and cleaning solutions in accordance with each
manufacturer’s directions.
♦ It is your responsibility to understand and follow your states regulations.
European Touch whirlpool pedicure spas will give you many years of service as long as proper
precautions, precise cleaning, and operating instructions are followed. It is the responsibility of
the spa owner to properly clean and maintain the spa. If you are experiencing problems
cleaning your spa, please contact the manufacturer of your pedicure products or European
Touch Technical Support @ 800-626-6912.
Doc ID: 01080001
Revision: F
Technical Support: 800-626-6912
Page 15