Canon Sure Shot 105 u date User guide

Camera User Guide
C
Y
P
O
ENGLISH
• Make sure you read this guide before using the camera.
• Store this guide safely so that you can use it in the future.
Checking the Package Contents
Check if the following items are included in your camera package. If anything
is missing, contact the retailer from which you purchased the camera.
Camera
AA-size Alkaline
Batteries (x2)
Memory Card
(128 MB)
AV Cable
AVC-DC400
Wrist Strap
WS-800
Interface Cable
IFC-400PCU
Getting Started
Y
P
O
DIGITAL CAMERA
Solution Disk
C
Warranty
Card
“Canon Customer
Support” Leaflet
Also refer to the PDF manuals on the CD-ROM.
After installation, shortcut icons appear on the desktop. If the software
installation fails, you can find the manuals in the Readme folder on the
CD-ROM.
• Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many
features to shoot more challenging photos.
• Personal Printing Guide
Read when you want to connect the camera to a printer and print.
• Software Starter Guide
Read when you want to connect the camera to a computer.
Explains how to install and use the software on the DIGITAL
CAMERA Solution Disk.
Download ZoomBrowser EX/ImageBrowser Software Guide (PDF)
from:
http://web.canon.jp/imaging/information-e.htm
• You can use the included memory card to try out your new camera and
take some test shots.
• Adobe Reader is required to view the PDF manuals.
2
Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
Y
P
O
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
C
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Memory Cards
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
3
What Do You Want to Do?
4
Shoot
● Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 20
● Easy Shooting (Easy Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
● Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 52 – 55
Take good people shots
I
Portraits
(p. 52)
F
C w
With nightscapes Kids and pets
(p. 52)
(p. 52)
Take good landscapes
J
Landscapes
(p. 52)
U
Indoors
(p. 53)
t
C
Fireworks
(p. 54)
P
With snowscapes
(p. 55)
,
O
y
Z
Y
P
O
Sunsets
(p. 54)
Shoot various other scenes
H
At the beach
(p. 54)
Nightscapes
(p. 54)
Aquarium
(p. 54)
Foliage
(p. 55)
Low light
(p. 55)
● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 61, 76, 79
● Shoot in places where I cannot use the flash
(turn off the flash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
● Shoot pictures with me in them too (self-timer). . . . . . . . . . . 60, 61
● Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 57
● Take close-up pictures of subjects (macro shooting) . . . . . . . . . 65
● Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 71
● Change the size of picture I want to take
(recording pixels). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
● Shoot without the effects of camera shake (image stabilization) . . 111
● Shoot without the effects of camera shake even in low light
conditions (High ISO Auto) . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 69
● Make dark subjects appear brighter (i-Contrast). . . . . . . . . . . . . 82
● Use the viewfinder to shoot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4
What Do You Want to Do?
1
View
● Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
● Easy Playback (Easy Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
● Automatically play back pictures (slideshow) . . . . . . . . . . . . . . . 92
● Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
● Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90, 91
● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 28, 97
● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . . 96
Shoot/View Movies
E
Y
P
O 2
● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
● View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Print
C
● Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Save
● Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Other
3
● Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
● Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Safety Precautions.............................8
1 Getting Started ....................11
Inserting the Batteries and Memory
Card .................................................12
Setting the Date and Time ...............16
Setting the Display Language..........18
Pressing the Shutter Button.............19
A Taking Pictures.......................20
1 Viewing Images ..........................23
Erasing Images................................24
2 Printing Images ..........................25
9 Shooting in Easy Mode ..............27
9 Easy Playback/Erasing ..............28
E Shooting Movies.........................29
Viewing Movies................................31
Transferring Images to a
Computer .........................................32
Accessories .....................................36
Separately Sold Accessories ...........38
C
3 Shooting in Special
Conditions and Commonly
Used Functions................... 51
Y
P
O
2 Learning More......................39
Components Guide..........................40
Power Saving Function
(Auto Power Down)..........................41
Information Displayed on the
Screen .............................................42
Indicators .........................................44
m FUNC. Menu – Basic
Operations .......................................45
6
n Menu – Basic Operations .... 46
Changing the Sound Settings ......... 47
Returning the Camera to Default
Settings ........................................... 48
Formatting Memory Cards .............. 49
Shooting in Various Conditions ....... 52
K Shooting in Special
Conditions ....................................... 53
! Turning the Flash Off.................. 56
Inserting the Date and Time............ 57
Zooming in More Closely on
Subjects (Digital Zoom)................... 58
Ò Using the Self-Timer................... 60
" Using the Face Self-Timer.......... 61
4 Selecting Settings
Yourself ............................... 63
G Shooting in Program AE ............. 64
h Turning the Flash On................... 64
e Shooting Close-ups (Macro) ....... 65
u Shooting Far Away Subjects
(Infinity) ........................................... 65
Changing the Recording Pixels
(Image Size).................................... 66
Changing the Image Quality
(Compression Ratio) ....................... 66
b Adjusting the Brightness
(Exposure Compensation) .............. 68
W Continuous Shooting ................. 68
- Changing the ISO Speed ......... 69
Table of Contents
Adjusting the White Balance ........... 70
Changing the Tone of an Image
(My Colors) ..................................... 71
Shooting Using a TV Monitor .......... 72
Î Shooting Using the Two Second
Self-Timer ....................................... 72
$ Customizing the Self-Timer ........ 73
Changing the Composition with
the Focus Lock................................ 74
Shooting Using the Viewfinder........ 74
5 Getting More Out of Your
Camera ................................ 75
Y
P
O
Changing the AF Frame Mode........ 76
% Shooting with the AF Lock ........ 77
Magnifying the Focal Point.............. 78
0 Selecting the Person to
Focus On (Face Select) .................. 79
Changing the Metering Mode.......... 80
& Shooting with the AE Lock ........ 80
( Shooting with the FE Lock ........ 81
… Shooting with Slow Synchro ...... 81
@ Making Dark Subjects Appear
Brighter (i-Contrast) ........................ 82
ΠRed-Eye Correction ................... 83
≈ Shooting Long Exposures .......... 84
C
d Searching for Images Using the
Jump Display................................... 91
. Viewing Slideshows .................... 92
Checking the Focus......................... 93
k Magnifying Images ..................... 94
+ Changing Image Transitions....... 94
Viewing Images on a TV ................. 95
: Protecting Images..................... 96
/ Erasing All Images...................... 97
\ Rotating Images.......................... 97
= Resizing Images ......................... 98
@ Making Dark Subjects Appear
Brighter (i-Contrast)......................... 99
] Correcting the Red-Eye
Effect ............................................. 100
Printing from the Print List
(DPOF) .......................................... 101
Selecting Images for Printing
(DPOF) .......................................... 102
6 Using Various Functions
for Shooting Movies ........... 85
Changing the Image Quality ........... 86
AE Lock/Exposure Shift .................. 87
Other Shooting Functions ............... 87
Playback Functions......................... 88
7 Using Playback and Other
Functions ............................ 89
g Searching Images by Sets of 9
(Index Display) ................................ 90
8 Customizing the Camera.. 105
Changing Functions ...................... 106
Changing Shooting Functions ....... 109
Changing Playback Functions....... 112
9 Useful Information ............ 113
Using Household Power................ 114
Troubleshooting............................. 115
List of Messages that Appear
on the Screen ................................ 118
Functions Available in Each
Shooting Mode .............................. 120
Menus............................................ 122
Handling Precautions .................... 125
Specifications ................................ 126
Index.............................................. 128
7
Safety Precautions
• Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
• The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Warning Denotes the possibility of serious injury or death.
Caution
Denotes the possibility of injury.
Caution
Denotes the possibility of damage to the equipment.
Warning
Camera
Y
P
O
• Do not look through the camera viewfinder at bright light sources (the sun,
etc.).
This could damage eyesight.
• Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
C
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,
contact a doctor immediately.
• Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Do not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
• Use only recommended power sources.
Using other power sources could result in fire or electrical shock.
8
Safety Precautions
Battery
• Use only recommended batteries.
• Do not place the batteries near or in direct flame.
• Do not let the batteries come into contact with water (e.g. sea water) or other liquids.
• Do not attempt to disassemble, alter or apply heat to the batteries.
• Avoid dropping or subjecting the batteries to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical
assistance.
Other Warnings
• Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer hearing loss from listening with headphones to
the loud sounds of a CD-ROM played on a music CD player.
C
Y
P
O
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could damage the camera or lead to injury.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the batteries, resulting in
electrical shock, fire, burns or other injuries. High temperatures may also cause
deformation of the casing.
Caution
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
9
Safety Precautions
• Do not use the flash with dirt, dust or other items stuck to the surface, or if it is
covered by your fingers or clothing.
This may cause the camera to malfunction.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
• Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunctions or damage the LCD monitor.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
• Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the LCD monitor.
C
10
Y
P
O
1
Getting Started
This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view, erase and print the images you
Y
P
O
take. The latter part of this chapter explains how to shoot and view
images in Easy Mode, how to shoot and view movies and how to
transfer images to a computer.
C
Attaching the Strap/Holding the Camera
• Attach the included strap and place it around your wrist to avoid dropping
the camera during use.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
Strap
11
Inserting the Batteries and Memory Card
Insert the included batteries and memory card into the camera.
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Slide and hold the cover lock
slide and open the cover
C
, then
as shown.
Y
P
O
Insert the batteries.
● Insert the batteries with (+) and (-) ends
oriented correctly.
Insert the memory card.
● Insert the memory card as shown until it
locks into place with a click.
● Be sure the memory card is oriented
Label
12
correctly. Inserting the memory card in the
wrong direction could damage the
camera.
Inserting the Batteries and Memory Card
Close the cover.
● Close the cover
and press downward
as you slide it until it clicks into place
.
Y
P
O
Removing the Memory Card
● Push the memory card in until you hear a
click, then slowly release it.
C
X The memory card will pop up.
13
Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Taken
Alkaline Batteries
(Supplied)
NiMH Batteries
(Sold Separately)
LCD monitor On*
140
350
LCD monitor Off
430
700
6
8
Power Source
Number of
Shots
Playback Time (Hours)
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, fewer shots can be taken.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully charged batteries.
Compatible Batteries
Y
P
O
AA-size alkaline batteries and Canon AA-size NiMH batteries (sold
separately) (pp. 36, 38).
Can any other batteries be used?
We cannot recommend the use of any other batteries than those listed above
because performance varies widely.
C
Why use NiMH batteries?
NiMH batteries last much longer than alkaline batteries, especially in cold
weather.
Battery Charge Indicator
When battery charge is low, an icon and message will appear. If the
batteries are charged, the icon and message will not display.
Display
Summary
Battery charge is low. Prepare new batteries to
continue using the camera.
“Change the batteries.”
14
The batteries are depleted. Insert new batteries.
Inserting the Batteries and Memory Card
Approximate Number of Shots per Memory Card
Memory Card
Number of Shots
128 MB (Supplied)
39
2 GB
626
8 GB
2505
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting Mode (p. 20).
C
Y
P
O
Number of shots that can be taken
Compatible Memory Cards
•
•
•
•
•
SD memory cards
SDHC memory cards
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
What is the write-protect tab?
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, [Card Locked!] will appear and you will not be able to take or erase
images.
15
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
● Press the power button.
X The Date/Time screen will appear.
Set the date and time.
● Press the qr buttons to select an option.
● Press the op buttons to set a value.
C
Y
P
O
Make the setting.
● Press the m button.
X Once the date and time have been set,
the Date/Time screen will close.
● Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
16
Setting the Date and Time
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
● Press the n button.
Select [Date/Time] in the 3 tab.
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Date/
Time], then press the m button.
C
Y
P
O
Change the date and time.
● Follow Steps 2 and 3 on p. 16 to adjust
the setting.
● To close the menus, press the n
button.
Date/Time battery
• The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained about three weeks after the batteries has been
removed.
• You can recharge the battery in approximately 4 hours by inserting AA-size
alkaline batteries or using the separately sold AC adapter (pp. 36, 38). You do
not need to turn the camera on to recharge the battery.
• If the date/time battery is depleted, the Date/Time menu will appear when you
turn the camera on. Follow the steps on p. 16 to set the date and time.
17
Setting the Display Language
You can change the language displayed in the LCD monitor menus and
messages.
Set the playback mode.
● Press the 1 button.
Display the settings screen.
● Press and hold the m button
press the n button
, then
.
Y
P
O
Set the display language.
● Press the opqr buttons to select a
language, then press the m button.
X Once the display language has been set,
C
the language menu will close.
You can also change the display language by pressing the n button,
selecting the 3 tab, and selecting the [Language] menu item.
18
Pressing the Shutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
X The camera automatically makes the
necessary settings for shooting, such as
focusing and setting the brightness.
X When the camera focuses, it will beep
twice and the indicator will light green.
Y
P
O
Press fully (to the second stop).
X The camera plays the shutter sound and
takes the shot.
C
If you just press the shutter button fully without pausing halfway, the
image may not be in focus.
19
A Taking Pictures
Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Turn on the camera.
● Press the power button.
X The start-up sound will play, and the startup screen will appear.
● Pressing the power button again will turn
the camera off.
Select the A mode.
Y
P
O
● Set the mode dial to A.
● When you point the camera toward the
subject, the camera will make a slight
noise as it determines the scene.
X The camera focuses on the subject it
judges to be the main subject, and
displays the icon for the determined scene
in the upper left of the screen.
X When faces are detected, a white frame
appears on the face of the main subject,
while gray frames appear on other
detected faces.
X Even if the detected faces move, the
camera will follow the faces within a
certain range.
C
Compose the shot.
● Moving the zoom lever toward i will
zoom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
20
A Taking Pictures
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and the indicator will light green
(orange when the flash will fire).
X Green AF frames appear where the
subject is in focus.
X Several AF frames will appear when the
camera focuses on more than one point.
AF Frames
Y
P
O
Shoot.
C
● Press the shutter button fully.
X The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
X The indicator will blink green while the
image is recorded to the memory card.
X The image will appear for about two
seconds.
● You can take a second picture even while
an image is displayed by pressing the
shutter button.
What if...
• The screen does not turn on when you turn on the camera?
Press the l button to turn on the screen.
• The camera does not play any sounds?
Pressing the l button while turning on the camera power will turn off all
sounds except for warning sounds. To turn the sounds on, press the n
button, select the 3 tab, and then select [Mute]. Use the qr buttons to select
[Off].
21
A Taking Pictures
• The image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. Shoot within the effective flash
range of approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle,
and approximately 30 cm – 2.0 m (12 in. – 6.6 ft.) at maximum telephoto.
• The indicator blinks yellow and the camera beeps once when the shutter
button is pressed halfway?
When the camera is at maximum wide angle, move about 3 cm (1.2 in.) or more
away from your subject and shoot. Move about 30 cm (12 in.) or more away
when the camera is at maximum telephoto.
• The lamp lights when the shutter button is pressed halfway.
To reduce red-eye and to assist in focusing, the lamp may light when shooting in
dark areas.
• The screen turns off when you try to take an image?
When flash recharging begins, the screen turns off. The screen turns on again
when recharging ends.
Scene Icons
Y
P
O
The camera displays an icon for the scene it has determined and then
automatically focuses and selects the optimum settings for subject
brightness and color.
Background
Subject
People
C
Bright
Backlit
Including Blue
Skies
Sunsets
Backlit
Dark
When Using
Tripod
—
*
Subjects Other
Than People/
Landscapes
*
Close Subjects
Icon Background
Color
—
Gray
Light Blue
Orange
—
Dark Blue
* Displays when the camera is attached to a tripod.
Under certain conditions, the icon that displays may not match the actual
scene. Especially when there is an orange or blue colored background (a
wall for example),
or the “Blue Skies” icons may appear and it may
not be possible to shoot with the appropriate color. If this happens, try
shooting in the G mode (p. 64).
22
1 Viewing Images
You can view your images on the screen.
Select the playback mode.
● Press the 1 button.
X The last image you took will appear.
Select an image.
● Pressing the q button will cycle through
the images in reverse order.
● Pressing the r button will cycle through
the images in the order they were taken.
Y
P
O
● The images change more quickly if you
C
keep the qr buttons pressed, but they
will appear coarse.
● Pressing the 1 button while the lens is
extended will cause the shooting screen
to reappear.
● The lens will retract after approximately 1
minute elapses. If you press the 1 button
with the lens retracted, the power will turn
off.
Switching to and from playback mode
Pressing the 1 button while the camera is off turns the camera on in playback
mode. Pressing it again turns the camera off. Pressing the shutter button halfway
while in playback mode causes the shooting screen to reappear.
23
Erasing Images
You can select and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Select the playback mode.
● Press the 1 button.
X The last image you took will appear.
Select an image to erase.
● Press the qr buttons to select an image.
C
Y
P
O
Erase the image.
● Press the p button.
X [Erase?] appears.
● Press the qr buttons to select [Erase],
then press the m button.
X The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons to select [Cancel], then press the
m button.
24
2 Printing Images
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
• Camera and PictBridge compliant printer (sold separately)
• Interface cable supplied with the camera (p. 2)
Turn off the camera and printer.
Connect the camera to the printer.
● Open the cover, and insert the small end
of the plug firmly into the camera terminal
in the direction shown.
● Insert the cable’s larger plug into the
printer. For connection details, refer to the
user guide provided with the printer.
C
Y
P
O
Turn on the printer.
Turn on the camera.
● Press the 1 button to turn on the camera.
X
will appear, and the c button will
light blue.
25
2 Printing Images
Select an image to print.
● Press the qr buttons to select an image.
Print images.
● Press the c button.
X Printing will start and the c button will
blink blue.
● If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
● After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
Y
P
O
Refer to the Personal Printing Guide (p. 2) for details on the best ways to
print.
C
Canon-Brand PictBridge Compliant Printers (Sold Separately)
By connecting your camera to one of the Canon-brand PictBridge compliant
printers below, you can print your images without having to use a computer.
Compact Photo Printers
(SELPHY series)
Inkjet Printers
(PIXMA series)
For more information, visit your nearest Canon retailer.
26
9 Shooting in Easy Mode
The explanations of camera operations and behavior below are basically the
same as in “A Taking Pictures” (p. 20) except that operational instructions
are displayed on the screen, and the camera is set so that only the buttons
explained on this page are functional. This prevents incorrect operation of the
camera, allowing even beginners to take worry-free pictures.
Select the 9 mode.
● Set the mode dial to 9.
C
Y
P
O
Shoot.
● Follow Steps 3 – 5 on pp. 20 and 21 to
shoot (the camera will not beep).
Turning Off the Flash
Press the r button.
X The flash turns off and ! displays on the
screen.
● Pressing the r button again displays
on the screen, and the flash will
automatically fire in low light conditions.
27
9 Easy Playback/Erasing
The explanations for viewing or erasing unwanted images are basically the
same as in “1 Viewing Images” (p. 23) and “Erasing Images” (p. 24) except
that operational instructions are displayed on the screen, and the camera is
set so that only the buttons explained on this page are functional. This
prevents incorrect operation of the camera, allowing even beginners to view
or erase images worry-free.
Viewing Single Images
Press the 1 button.
X The last image you took will appear.
Select an image.
● Press the qr buttons to select an image.
Viewing Slideshows
Y
P
O
Press the 1 button.
Press the m button.
C
X All the shots you have taken will display
for about 3 seconds each.
● Press the m button again to stop the
slideshow.
Erasing Images
Press the 1 button.
Select an image to erase.
X Press the qr buttons to select an image.
Erase the image.
● Press the p button and then the qr
buttons to select [Erase]. Then press the
m button.
X The selected image will be erased.
28
E Shooting Movies
The camera can automatically select all settings so that you can shoot
movies just by pressing the shutter button.
Select the E mode.
● Set the mode dial to E.
Shooting Time
Y
P
O
Compose the shot.
C
● Moving the zoom lever toward i will
zoom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
Focus.
● Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and the indicator will light green.
29
E Shooting Movies
Shoot.
● Press the shutter button fully.
X The camera will start shooting the movie,
and [ Rec.] and the elapsed time will
appear.
● Once shooting begins, take your finger off
the shutter button.
● If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
Elapsed Time
Y
P
O
● Do not touch the microphone while
shooting.
● Do not press any buttons other than the
Microphone
C
shutter button. Otherwise, the sound the
buttons make will be recorded in the
movie.
Stop shooting.
● Press the shutter button fully again.
X The camera will beep once and stop
shooting the movie.
X The indicator will blink green, and the
movie will record to the memory card.
X Shooting will automatically stop when the
memory card fills.
Estimated Shooting Times
Memory Card
Shooting Time
128 MB (Supplied)
1 min. 4 sec.
2 GB
16 min. 47 sec.
8 GB
1 hr. 7 min. 6 sec.
• Shooting times are based on default settings. Shooting time can be checked on
the screen in Step 1.
• Recording will automatically stop when either the clip file size reaches 4 GB or
the recording time reaches approximately 1 hour.
30
Viewing Movies
You can view your movies on the screen.
Select the playback mode.
● Press the 1 button.
X The last image you shot will appear.
X
appears on movies.
Select a movie.
● Press the qr buttons to select a movie to
play, then press the m button.
X The movie control panel will appear.
C
Y
P
O
Play the movie.
● Press the qr buttons to select
, then
press the m button.
X The movie will play.
● You can pause/resume the movie by
pressing the m button again.
● Press the op buttons to adjust the
volume.
● After the movie finishes,
appears.
31
Transferring Images to a Computer
You can use the included software to transfer your camera images to a
computer.
System Requirements
Even though these are recommended system requirements, not all
computer functions can be guaranteed.
Windows
OS
Windows Vista (including Service Pack 1)
Windows XP Service Pack 2, Service Pack 3
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
CPU
Pentium 1.3 GHz or higher
RAM
Windows Vista: 1 GB or more
Windows XP: 512 MB or more
Y
P
O
Interface
USB
Free Hard Disk
Space
Canon Utilities
• ZoomBrowser EX: 200 MB or more
• PhotoStitch: 40 MB or more
Display
1,024 x 768 pixels or higher
C
Macintosh
OS
Mac OS X (v10.4 – v10.5)
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
CPU
PowerPC G4/G5 or Intel Processor
RAM
512 MB or more
Interface
USB
Free Hard Disk
Space
Canon Utilities
• ImageBrowser: 300 MB or more
• PhotoStitch: 50 MB or more
Display
1,024 x 768 pixels or higher
32
Transferring Images to a Computer
Items to Prepare
• Camera and computer
• DIGITAL CAMERA Solution Disk supplied with the camera (p. 2)
• Interface cable supplied with the camera (p. 2)
Preparations
Windows XP and Mac OS X (v10.4) are used for these explanations.
Install the software.
Windows
Place the DIGITAL CAMERA Solution
Disk in the computer’s CD-ROM drive.
Y
P
O
Begin installation.
● Click [Easy Installation] and follow the
C
onscreen instructions to proceed with the
installation.
When the install finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
● Remove the CD-ROM when your desktop
screen appears.
Macintosh
● Place the CD-ROM in the computer’s
CD-ROM drive and double-click the
icon.
X The screen on the left displays.
● Click [Install], and follow the onscreen
instructions to proceed with the
installation.
33
Transferring Images to a Computer
Connect the camera to the
computer.
● Turn off the camera.
● Open the cover, and insert the cable’s
small plug into the camera terminal in the
direction as shown.
● Insert the cable’s larger plug into the
computer’s USB port. For connection
details, refer to the user guide provided
with the computer.
Turn on the camera.
Y
P
O
● Press the 1 button to turn on the camera.
Open CameraWindow.
C
Windows
● Select [Canon CameraWindow] and click
[OK].
X CameraWindow will appear.
● If CameraWindow does not appear, click
the [Start] menu and select [All Programs]
or [Programs], followed by [Canon
Utilities]
[CameraWindow]
[CameraWindow]
[CameraWindow].
34
Transferring Images to a Computer
Macintosh
X CameraWindow will appear when a
connection between the camera and
computer is established.
● If CameraWindow does not appear, click
the [CameraWindow] icon on the Dock
(the bar which appears at the bottom of
the desktop).
Transfer Images
● Click [Transfer Untransferred Images].
X All images not previously transferred will
Y
P
O
transfer to the computer.
● After the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
C
Software Starter Guide (p. 2).
Images transferred to the computer will be sorted by date and saved in
separate folders in the “My Pictures” folder for Windows or the “Picture”
folder for Macintosh.
35
Accessories
Supplied with Camera
AV Cable AVC-DC400*1
Interface Cable IFC-400PCU*1
Memory Card
(128 MB)
Wrist Strap
WS-800
C
AA-size Alkaline Batteries
(x2)
Y
P
O
Battery and Charger Kit CBK4-300*3
Battery Charger CB-5AH
AA-size NiMH batteries
(NB-3AH x4)
DIGITAL CAMERA
Solution Disk
AC Adapter Kit ACK800
Compact Power Adapter CA-PS800
Power Cord
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
*3 Battery and Charger Kit CBK4-200 may also be used.
36
Accessories
Video IN Terminal
Audio IN Terminal
TV/Video
Compact Photo Printers
(SELPHY series)*2
Y
P
O
Card Reader
C
Inkjet Printers
(PIXMA series)*2
Windows/
Macintosh
High-Power Flash
HF-DC1
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
37
Separately Sold Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
• Battery and Charger Kit CBK4-300
This kit includes both a dedicated charger unit and four rechargeable AAsize NiMH (nickel metal hydride) batteries. Recommended for powering
the camera for an extended period of time.
• AC Adapter Kit ACK800
This kit lets you power the camera using household power.
Recommended for powering the camera for an extended period of time or
when connecting to a computer. Cannot be used to charge the batteries
inside the camera.
Y
P
O
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use devices such as electrical transformers for foreign travel because they will
cause malfunctions.
C
Other Accessories
• High-Power Flash HF-DC1
This attachable supplementary flash can illuminate subjects that are too
distant for the light from the built-in flash to reach.
38
2
Learning More
This chapter explains the parts of the camera and what displays on
the screen, as well as, the basic operating instructions.
Y
P
O
Conventions Used in this Guide
• Icons are used in the text to represent the camera buttons and switches.
• Language that displays on the screen appears inside [ ] (square brackets).
• The directional buttons and FUNC./SET button are represented by the
following icons.
C
(Up button)
(FUNC./SET button)
(Right button)
(Left button)
(Down button)
•
: Troubleshooting tips.
•
: Hints for getting more out of your camera.
•
: Things you should be careful about.
•
: Supplemental information.
• (p. xx): Reference pages. “xx” stands for page number.
• This chapter assumes all functions are at their default settings.
39
Components Guide
Zoom Lever
Shooting: i (Telephoto) / j (Wide
Angle) (p. 20)
Playback: k (Magnify) (p. 94) /
g (Index) (p. 90)
Lamp (AF Assist Beam (p. 109) / RedEye Reduction Lamp (p. 109) / SelfTimer Lamp (pp. 60, 61, 72, 73))
Microphone (p. 30)
Lens
Mode Dial
C
Shutter Button (p. 19)
Mode Dial
Power Button (p. 20)
Flash (p. 56)
Tripod Socket
Cover Lock (p. 12)
Memory Card / Battery Cover (p. 12)
Strap Mount (p. 11)
Y
P
O
Use the mode dial to change modes.
Program AE Mode
You can select settings
yourself to take various types
of pictures (p. 64).
Auto Mode
You can shoot letting the
camera select all settings
automatically (p. 20).
Easy Mode
Just press the shutter button for
worry-free pictures (p. 27).
Movie Mode
You can shoot movies
(p. 29).
Scene Modes
The camera automatically
selects the best settings for
the scene so that you can
take images just by pressing
the shutter button (p. 52).
Turning the mode dial in Playback mode will switch the camera to
Shooting mode.
40
Power Saving Function (Auto Power Down)
Viewfinder (p. 74)
Speaker
0 (Face Selector) Button (p. 79)
Screen (LCD Monitor) (pp. 42, 43)
l (Display) Button (pp. 42, 43)
Indicators (p. 44)
1 (Playback) Button (p. 23)
DC IN (Power input) Terminal (p. 114)
A/V OUT (Audio/Video Output) and
DIGITAL Terminal (pp. 25, 34, 95)
c (Direct Print) Button (pp. 25, 112)
C
n Button (p. 46)
b (Exposure Compensation) (p. 68) /
d (Jump) (p. 91) / o Button
e (Macro) (p. 65) / u (Infinity) (p. 65) /
q Button
m FUNC./SET (Function/Set) Button
(p. 45)
h (Flash) (pp. 56, 64) / r Button
Q (Self-Timer) (pp. 60, 61) /
a (1 Erase Image) (p. 24) / p Button
Y
P
O
Power Saving Function (Auto Power Down)
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving during Shooting
The monitor will turn off approximately 1 minute after the camera is last
operated. After about 2 more minutes, the lens will retract and the power will
turn off.
When the monitor has turned off but the lens has not retracted yet, pressing
the shutter button halfway (p. 19) turns on the monitor and shooting can
continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after the camera is last operated.
• You can turn off the Power Saving Function (p. 106).
• You can adjust the time before the monitor turns off (p. 106).
41
Information Displayed on the Screen
Shooting (Information Display)
Shooting Mode (p. 40)
ISO Speed (p. 69)
White Balance (p. 70)
My Colors (p. 71)
Metering Modes (p. 80)
Drive Mode (p. 68)
Image Quality
(Compression) (p. 66)/
Recording Pixels (p. 66)
Digital Zoom
Magnification (p. 58)/
Digital Tele-Converter
(p. 59)
AF Frame (p. 21)
*
Macro (p. 65), Infinity
(p. 65)
Flash Mode (pp. 56, 64,
81)
Red-Eye Correction
(p. 83)
Self Timer (pp. 60, 61,
72, 73)
Camera Orientation*
Spot AE Point Frame
(p. 80)
AF Lock (p. 77)
i-Contrast (p. 82)
AE Lock (pp. 80, 87),
FE Lock (p. 81)
C
Create Folder (p. 107)
Still Images: Recordable
shots (p. 15)
Movies: Remaining
Time/Elapsed Time
(p. 30)
Disp. Overlay (p. 111)
Shutter Speed
Aperture Value
Image Stabilizer (p. 111)
Exposure Compensation
(p. 68)
Date Taken/Recorded
(p. 57)
Y
P
O
: Standard,
: Held vertically
When shooting, the camera detects if it is held vertically or horizontally, and adjusts
settings accordingly for the best shot. It also detects orientation during playback, so you
can hold the camera in either orientation and it will automatically rotate images for correct
viewing.
This function may not operate correctly when the camera is pointed straight up or down.
Switching the Display
You can change the display using the l button.
No Information Display
42
Information Display
Display Off
Information Displayed on the Screen
Playback (Detailed Information Display)
Print List (p. 101)
Shooting Mode (p. 40)
Shutter Speed
Exposure Compensation
(p. 68), Exposure Shift
(p. 87)
White Balance (p. 70)
Histogram (p. 44)
Image Quality
(Compression) (p. 66)/
Recording Pixels (p. 66),
AVI (Movies)
Metering Modes (p. 80)
Battery Charge Indicator
(p. 14)
Folder Number – File
Number (p. 107)
Displayed image
number/Total number of
images
ISO Speed (p. 69)
Aperture Value, Image
Quality (Movies)
i-Contrast (pp. 82, 99)
Flash Sync (pp. 64, 81)
Macro (p. 65), Infinity
(p. 65)
C
Switching the Display
File Size
Still Images: Recording
Pixels (p. 67)
Movies: Movie Length
(p. 86)
Image Editing (pp. 98 –
100)
Protect (p. 96)
My Colors (p. 71)
Red-Eye Correction
(pp. 83, 100)
Shooting Date and Time
(p. 57)
Y
P
O
You can change the display using the l button.
No Information
Display
Simple Information
Display
Detailed Information
Display
Focus Check Display
(p. 93)
You can also switch the display by pressing the l button while the
image displays shortly after shooting. However, the Simple Information
will not display.
43
Indicators
Display in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
Overexposure Warning during Playback
In “Detailed Information Display” (p. 43), overexposed areas of the image
flash on the screen.
Histogram during Playback
High
Low
Dark
Bright
Indicators
● The graph that appears in “Detailed
Y
P
O
Information Display” (p. 43) is called the
histogram. The histogram shows the
distribution and amount of brightness of an
image. When the graph approaches the right
side, the image is bright, but when it
approaches the left side, the image is dark,
and in this way you can judge the exposure.
C
The indicators on the back of the camera (p. 41) will light or blink under the
following conditions.
Colors
Green
Orange
Yellow
Status
Lights
Blinks
Lights
Blinks
Lights
Blinks
Operation Status
Shooting preparation complete (p. 21)/Display Off (p. 106)
Recording/reading/transmitting image data (p. 21)
Shooting preparation complete (flash on) (p. 21)
Camera shake warning (p. 56)
e (p. 65)/u (p. 65)/% (p. 77)
Proximity warning (p. 22)/Cannot focus (p. 116)
When the indicator blinks green, data is being recorded to/read from the
memory card or various information is being transmitted. Do not turn off
the power, open the memory card slot/battery cover, shake or jolt the
camera. These actions may corrupt the image data or cause the camera
or memory card to malfunction.
44
m FUNC. Menu – Basic Operations
Commonly used shooting functions can be set with the FUNC. menu. The
menu items and options differ depending on the mode (p. 120).
Select a shooting mode.
● Set the mode dial to the desired shooting
mode.
Display the FUNC. menu.
● Press the m button.
Y
P
O
Select a menu item.
● Press the op buttons to select a menu
item.
X The selectable options for the menu item
C
Selectable Options
Menu Items
appear in the lower part of the screen.
Select an option.
● Press the qr buttons to select an option.
● You can also select settings by pressing
the l button on options that display
.
Make the setting.
● Press the m button.
X The shooting screen will reappear and the
setting you selected will display on the
screen.
45
n Menu – Basic Operations
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The menu items
differ depending on the mode (pp. 122 – 125).
Display the menu.
● Press the n button.
Select a tab.
● Press the qr buttons, or move the zoom
lever (p. 40) left or right to select a tab
(category).
Y
P
O
Select a menu item.
● Press the op buttons to select a menu
item.
● Some items require you to press the m
C
button to display a submenu in which you
change the setting.
Select an option.
● Press the qr buttons to select an option.
Make the setting.
● Press the n button.
X The standard screen will reappear.
46
Changing the Sound Settings
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
● Press the n button.
Select [Mute].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Mute],
then use the qr buttons to select [On].
Y
P
O
Adjusting the Volume
C
Display the menu.
● Press the n button.
Select [Volume].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Volume],
then press the m button.
Change the volume.
● Press the op buttons to select an item,
then use the qr buttons to adjust the
volume.
47
Returning the Camera to Default Settings
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
● Press the n button.
Select [Reset All].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Reset
All], then press the m button.
Y
P
O
Reset the settings.
● Press the qr buttons to select [OK], then
press the m button.
X The camera will reset to the default
settings.
C
Are there functions that cannot be reset?
• The [Date/Time] (p. 16) in the 3 tab, [Language] (p. 18), [Video System] (p. 95).
• The saved data for custom white balance (p. 70).
48
Formatting Memory Cards
Before you use a new memory card or one that has been used in other
devices, you should format the card with this camera. Formatting (initializing)
a memory card erases all data on the memory card. As you cannot retrieve
the erased data, exercise adequate caution before formatting the memory
card.
Display the menu.
● Press the n button.
Select [Format].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Format],
then press the m button.
C
Y
P
O
Format the memory card.
● Press the qr buttons to select [OK], then
press the m button.
X The memory card will be formatted.
X When formatting has finished, the menu
screen will reappear.
Low Level Format
Perform low level formatting when you think that the recording/reading
speed of a memory card has dropped.
● Follow Steps 1 – 2 above to display the
[Format] screen.
● Press the op buttons to select [Low
Level Format], then use the qr buttons to
display
.
● Press the opqr buttons to select [OK],
then press the m button.
X Low level formatting starts.
49
Formatting Memory Cards
About formatting
• The supplied memory card has already been formatted.
• When the [Memory card error] message appears, or when the camera does not
work correctly, formatting the memory card may solve the problem. Copy the
images from the memory card to a computer or other device before formatting.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
• Low level formatting may take longer than standard formatting, since all
recorded data are erased.
• You can stop a low level format of a memory card by selecting [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
C
50
Y
P
O
3
Shooting in Special
Conditions and Commonly
Used Functions
Y
P
O
This chapter explains how to shoot in different conditions, as well as
how to use other common functions, such as the flash and self-timer.
C
• When you set the mode dial to a scene mode, or select a scene in K
mode, that matches a particular set of conditions, the camera will
automatically select any necessary settings. All you need do is press the
shutter button to take an optimized picture.
• This chapter assumes the mode dial is set to A for “! Turning the
Flash Off” (p. 56) to “" Using the Face Self-Timer” (p. 61). When
shooting in a scene mode, check which functions are available in that
mode (pp. 120 – 123).
51
Shooting in Various Conditions
The camera will select the necessary settings for the conditions in which you
wish to shoot when you select the matching mode.
Select a shooting mode.
● Set the mode dial to the scene you wish to
shoot.
Shoot.
I Take portraits (Portrait)
● Produces a soft effect when
photographing people.
Y
P
O
JTake landscapes (Landscape)
● For shooting majestic landscapes.
C
F Take snapshots at night
(Night Snapshot)
● Lets you take beautiful snapshots of
people against city nightscapes or night
backgrounds.
● If you hold the camera firmly, you can take
pictures with reduced camera shake, even
without a tripod.
CTake shots of kids and pets
(Kids&Pets)
● Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
52
K Shooting in Special Conditions
H Take indoor shots (Indoor)
● Lets you shoot indoors with natural colors.
In F, C or H mode, images may appear coarse because the ISO speed
(p. 69) is increased to match the shooting conditions.
K Shooting in Special Conditions
Y
P
O
The camera will select the necessary settings for the conditions in which you
wish to shoot when you select the matching mode.
Select a shooting mode.
● Set the mode dial to K and press the
C
m button.
● Press the op buttons to select U, then
use the qr buttons to select a mode.
● Press the m button.
Shoot.
53
K Shooting in Special Conditions
UShoot sunsets (Sunset)
● Lets you take shots of sunsets in vivid
colors.
, Take nightscapes (Night Scene)
● Lets you take beautifully lit city
nightscapes or night backgrounds.
Y
P
O
t Take shots of fireworks
(Fireworks)
● Lets you take shots of fireworks in vivid
colors.
C
w Take shots of people at the beach
(Beach)
● Lets you take bright shots of people on
sandy beaches where the reflected
sunlight is strong.
y Take shots of aquatic life in an
aquarium (Aquarium)
● Lets you take natural-colored shots of
aquatic life in indoor aquariums.
54
K Shooting in Special Conditions
O Take shots of foliage (Foliage)
● Lets you shoot trees and leaves, such as
new growth, autumn leaves or blossoms,
in vivid colors.
P Take shots of people in snow
(Snow)
● Lets you take bright, natural-colored shots
of people against snowy backgrounds.
Y
P
O
Z Shoot using high ISO speed
(ISO3200)
● Sets the ISO speed to 3200, and lets you
C
shoot without camera shake or subject
blurring even in low light conditions.
● Recording pixels are set to
(1600 x
1200 pixels) (p. 66).
• In , mode, make sure the subject does not move until the shutter sound
plays, even after the flash fires.
• In , or t mode, attach the camera to a tripod to prevent the camera
from moving and blurring the image. Additionally, you are recommended
to set [IS Mode] to [Off] (p. 111).
• In y mode, images may appear coarse because the ISO speed (p. 69)
is increased to match the shooting conditions.
• In Z mode, images may appear coarse.
55
! Turning the Flash Off
You can shoot with the flash turned off.
Press the r button.
Select !.
● Press the qr buttons to select !, then
press the m button.
X ! will appear.
● Follow the steps above to return the
Y
P
O
setting to
C
.
What if the indicator blinks orange and a flashing
appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, the indicator will blink orange and a flashing
will appear.
Attach the camera to a tripod to prevent it from moving.
56
Inserting the Date and Time
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 16).
Select [Date Stamp].
● Press the n button.
● Press the qr buttons to select the 4 tab,
then use the op buttons to select [Date
Stamp].
Select the setting.
● Press the qr buttons to select [Date] or
[Date & Time].
Y
P
O
● Pressing the n button will restore the
shooting screen.
X [DATE] will appear.
Shoot.
C
X You can insert the shooting date and time
in the image’s lower right corner.
● To restore to the original setting, select
[Off] in Step 2.
Inserting and printing the date and time in images which do
not have an embedded date and time
• Use the DPOF print settings (p. 102) to print.
• Use the included software to print.
Refer to the Software Starter Guide (p. 2) for details.
• Connect the camera to a printer to print.
Refer to the Personal Printing Guide (p. 2) for details.
57
Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to a maximum of 16x and capture
subjects that are too far away for the optical zoom (p. 20) to enlarge. The
images may appear coarse, however, depending on the recording pixel
setting (p. 66) and the zoom factor used.
Move the zoom lever toward i.
● Hold the lever until zooming stops.
X When you release the zoom lever, the
largest possible zoom factor without
image deterioration, and
will appear.
Move it toward i again.
Y
P
O
X The digital zoom will further zoom in on
the subject.
C
Zoom Factors at which Images Deteriorate
Recording Pixels
Optical Zoom
Digital Zoom
4.0x
4.9x
6.2x
10x
16x
: No image deterioration (zoom factor appears white)
: Image deterioration (zoom factor appears blue)
: Maximum zoom factor without deterioration (Safety Zoom)
Turning off the digital zoom
To turn off the digital zoom, press the n button, select the 4 tab, and select
[Digital Zoom] and the [Off] option.
58
Zooming in More Closely on Subjects (Digital Zoom)
The focal length when using digital zoom is 35 – 560 mm (35mm film
equivalent).
Digital Tele-Converter
The focal length of the lens can be increased by an equivalent of 1.5x or
2.0x. This enables a faster shutter speed and less chance of camera shake
than the zoom (including digital zoom) used by itself at the same zoom
factor.
The images may appear coarse, however, depending on the combination of
recording pixel (p. 66) and digital tele-converter settings used.
Select [Digital Zoom].
Y
P
O
● Press the n button.
● Press the qr buttons to select the 4 tab,
then use the op buttons to select [Digital
Zoom].
Accept the setting.
C
● Press the qr buttons to select [1.5x] or
[2.0x].
● Pressing the n button will return you
to the shooting screen.
X The view will be enlarged,
and the
zoom factor will display on the screen.
● To return to standard digital zoom, select
[Digital Zoom] and the [Standard] option.
Combinations that Cause Image Deterioration
• Using [1.5x] at a recording pixel setting of
or
will cause image
deterioration (
and the zoom factor will display in blue).
• Using [2.0x] at a recording pixel setting of
,
or
will cause image
deterioration (
and the zoom factor will display in blue).
• The respective focal lengths when using [1.5x] and [2.0x] are 52.5 –
210 mm and 70 – 280 mm (35mm film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
59
Ò Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
Press the p button.
Select Ò.
● Press the op buttons to select Ò, then
press the m button.
X Once set, Ò will appear.
C
Y
P
O
Shoot.
● Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
● To restore the original setting, select
in Step 2.
You can change the delay time and number of shots taken (p. 73).
60
" Using the Face Self-Timer
Once you compose the shot, such as for a group photo, and press the
shutter button, the camera will take three shots in a row two seconds after it
detects your face (p. 76) when you enter the composition.
Select ".
● Follow Step 2 on p. 60 and select ".
Compose the shot and press the
shutter button halfway.
● Make sure a green frame appears on the
face focused on by the camera and white
frames appear on other faces.
Press the shutter button fully.
Y
P
O
X The camera will enter shooting stand-by,
C
and [Look straight at camera to start count
down] will appear.
X The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
X When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter will release.
X The second and third shots will continue in
succession.
● To restore the original setting, select
in Step 2 on p. 60.
What if a face is not detected?
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
Changing the number of shots
For the screen in Step 1, press the n button, then press the qr buttons to
change the number of shots. Press the m button to accept the setting.
61
C
62
Y
P
O
4
Selecting Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shooting skills.
C
Y
P
O
• This chapter assumes that the mode dial is set to G (p. 40).
• G stands for Program AE.
• Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 120 – 123).
63
G Shooting in Program AE
You can select the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
Set the mode dial to G (p. 40).
Adjust the settings according to
your purposes (pp. 64 – 73).
Shoot.
Y
P
O
What if the shutter speed and aperture value are displayed
in red?
C
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash
• Select a higher ISO speed (p. 69)
h Turning the Flash On
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 30 cm – 4.0 m (12 in. – 13 ft.), and at
maximum telephoto, it is 30 cm – 2.0 m (12 in. – 6.6 ft.)
Select h.
● After pressing the r button, press the qr
buttons to select h, then press the m
button.
X Once set, h will appear.
64
e Shooting Close-ups (Macro)
You can shoot an object at a close distance or even shoot extreme closeups of it. The possible shooting range is approximately 3 – 50 cm (1.2 in. –
1.6 ft.) from the end of the lens when the zoom lever is moved to the
maximum wide angle, and approximately 30 – 50 cm (12 in. – 1.6 ft.) when
the zoom lever is moved to the maximum telephoto side.
Select e.
● After pressing the q button, press the qr
buttons to select e, then press the m
button.
X Once set, e will appear.
Using Î
Y
P
O
You are recommended to attach the camera to a tripod and shoot in Î, to prevent
the camera from moving and blurring the image (p. 72).
The edges of the image may darken if the flash fires.
C
u Shooting Far Away Subjects (Infinity)
You can shoot landscapes and far away subjects. The focusing range is 3 m
(9.8 ft.) and greater from the camera.
Select u.
● After pressing the q button, press the qr
buttons to select u, then press the m
button.
X Once set, u will appear.
65
Changing the Recording Pixels (Image Size)
You can select from six settings.
Select the recording pixels.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you selected will display on
the screen.
If you select
, you cannot use the Digital Zoom (p. 58) or Digital TeleConverter (p. 59).
Y
P
O
Changing the Image Quality (Compression Ratio)
You can select from the following two levels of image quality:
(Fine),
(Normal).
C
Select the recording pixels.
● After pressing the m button, press the
op buttons to select
.
Change the image quality.
● Press the l button.
● Press the qr buttons to select an option,
then press the m button.
X The setting you selected will display on
the screen.
66
Changing the Image Quality (Compression Ratio)
Approximate Values for Recording Pixels and Image Quality
Recording Pixels
Image
Quality
Single Image
Data Size
(Approx. KB)
Recordable Number of Images
128 MB
2 GB
8 GB
(Supplied)
(Large)
12M/4000 x 3000
3084
39
626
2505
1474
82
1280
5116
(Medium 1)
8M/3264 x 2448
2060
59
930
3721
980
123
1920
7675
(Medium 2)
5M/2592 x 1944
1395
87
1365
5457
695
173
2672
10679
(Medium 3)
2M/1600 x 1200
558
217
3235
12927
278
411
6146
24562
150
711
10245
40937
61406
(Small)
0.3M/640 x 480
(Widescreen)
4000 x 2248
C
Y
P
O
84
1118
15368
2311
53
830
3318
1105
109
1707
6822
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
Approximate Values when Selecting by Paper Size
A2
A3
●
Suitable for sending images as e-mail
attachments.
●
For printing on wide size paper.
A4, Letter size
5" x 7"
Postcard size
3.5" x 5"
67
b Adjusting the Brightness (Exposure
Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Correct the exposure.
● After pressing the o button, press the qr
buttons to correct the exposure. Then
press the m button.
X The exposure compensation amount will
display on the screen.
Y
P
O
W Continuous Shooting
You can shoot continuously at about 1.1 images/second.
Select the drive mode.
● After pressing the m button, press the
C
op buttons to select
.
Select W.
● Press the qr buttons to select W, then
press the m button.
X Once set, W will appear.
Shoot.
X As long as you hold the shutter button
down, the camera will shoot successive
images.
• Cannot be used with the self-timer (pp. 60, 61, 72, 73).
• For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
• As the number of images increases, the shooting intervals may take
longer.
• If the flash fires, shooting intervals may take longer.
68
- Changing the ISO Speed
Select the ISO speed.
● After pressing the m button, press the
op buttons to select
.
Select a menu item.
● Press the qr buttons to select an option,
then press the m button.
X The setting you select will display on the
screen.
Automatically sets the optimal speed for the shooting mode and shooting
conditions.
Low Fine weather conditions, outdoor shooting
Y
P
O
Cloudy, Twilight
High Nightscapes, Dark interiors
Changing the ISO speed
• Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
• Raising the ISO speed results in a faster shutter speed, reducing camera shake
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
C
• When the camera is set to
, you can press the shutter button halfway
to display the automatically set ISO speed.
• With ISO3200 you can set an even faster speed (p. 55).
69
Adjusting the White Balance
The white balance (WB) function sets the optimal white balance for natural
looking colors.
Select the white balance.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you select will display on the
screen.
Y
P
O
Auto
Automatically sets the optimal white balance for the shooting
conditions.
Day Light
Fine weather conditions, outdoor shooting
Cloudy
Cloudy, shady, twilight conditions
Tungsten
Tungsten, bulb-type (3-wavelength) fluorescent lighting
Fluorescent
Fluorescent H
Custom
Warm-white fluorescent, cool-white fluorescent, warm-whitetype (3-wavelength) fluorescent lighting
Daylight fluorescent, daylight-type (3-wavelength) fluorescent
lighting
C
Manually sets a custom white balance.
Custom White Balance
You can adjust the white balance to the light source at the shooting location
for natural looking colors when shooting. Make sure that you set the white
balance under the lighting conditions of the shooting scene.
● In Step 2 above, select
.
● Make sure the entire screen is filled with
the white subject, then press the l
button.
X The tint on the screen will change when a
white balance data is set.
70
Changing the Tone of an Image (My Colors)
You can change the tone of an image to sepia or black and white when
shooting.
Select My Colors.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting you select will display on the
screen.
My Colors Off
Y
P
O
—
Vivid
Emphasizes the contrast and color saturation for a vivid
impression.
Neutral
Tones down the contrast and color saturation for neutral hues.
Sepia
Sepia tones.
B/W
Black and white.
Custom Color
C
You can adjust the tone of the image to your preference.
The white balance cannot be set in the
and
modes (p. 70).
Custom Color
The contrast, sharpness and color saturation in an image can be selected
and set from 5 different levels.
● Select
in Step 2 above and press the
l button.
● Press the op buttons to select an option,
then use the qr buttons to select a value.
● The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
● Press the l button to accept the
setting.
71
Shooting Using a TV Monitor
You can use a TV to display the camera screen content.
• Connect the camera to a TV as described in “Viewing Images on a TV” (p. 95).
• Shooting procedures are the same as when using the camera’s monitor.
Î Shooting Using the Two Second Self-Timer
You can set the self-timer to a delay of approximately two seconds.
Select Î.
● After pressing the p button, press the
op buttons to select Î, then press the
m button.
X Once set, Î will appear.
● Follow Step 3 on p. 60 to shoot.
C
72
Y
P
O
$ Customizing the Self-Timer
You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).
Select $.
● After pressing the p button, press the
op buttons to select $, then
immediately press the n button.
Select the settings.
● Press the op buttons to select [Delay] or
[Shots].
● Press the qr buttons to select a value,
then press the m button.
Y
P
O
● Follow Step 3 on p. 60 to shoot.
What if the number of shots is set to two or more shots?
• Exposure and white balance settings are set with the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
C
• If the flash fires, the shooting interval may be longer.
• If you set a high number of shots, the shooting interval may be longer.
• If the memory card becomes full, shooting stops automatically.
73
Changing the Composition with the
Focus Lock
While you press and hold the shutter button halfway, the focus and exposure
are fixed. You can now recompose and shoot. This is called Focus Lock.
Focus.
● Center the subject you want in focus, and
press the shutter button halfway.
● Confirm that the AF Frame on the subject
is green.
Recompose.
Y
P
O
● Hold the shutter button pressed halfway
and recompose the scene.
Shoot.
● Press the shutter button fully.
C
Shooting Using the Viewfinder
If you want to save battery power, you can use the viewfinder for shooting,
instead of the screen. Shooting procedures are the same as when using the
screen. The camera will automatically focus on the subject, it will not use
face detection to focus.
Turn off the screen (p. 42).
● Press the l button to turn off the
screen.
Compose and shoot.
● Use the viewfinder to compose and shoot.
The view in the viewfinder and the image taken may differ.
74
5
Getting More Out of Your
Camera
Y
P
O
This chapter serves as the advanced version of Chapter 4 and
explains how to take pictures using various functions.
C
• This chapter assumes that the mode dial is set to G (p. 40).
• “≈ Shooting Long Exposures” (p. 84) assumes you have set the mode
dial to K and selected ≈ mode.
• Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 120 – 123).
75
Changing the AF Frame Mode
You can change the AF (Auto Focus) frame mode to match the conditions
you want to shoot.
Select [AF Frame].
● Press the n button, select the 4
tab, select [AF Frame], then press the qr
buttons to select an option.
Face AiAF
• Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (
only).
• When the camera is pointed at subjects, a white frame appears on the
face the camera judges to be the main subject, and gray frames (max. 2)
will appear on other faces. When the shutter button is pressed halfway, up
to 9 green frames will appear on faces on which the camera focuses.
Y
P
O
• If a face is not detected and only gray frames (no white frame) appear,
up to 9 green frames will appear on the areas the camera focuses on
when the shutter button is pressed halfway.
• Examples of faces that cannot be detected:
C
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
76
% Shooting with the AF Lock
Center
The AF frame is fixed at the center. This is effective for focusing on a specific
point.
You can reduce the AF frame size
• Press the n button, select the 4 tab, then select the [AF Frame Size]
menu item and [Small] option.
• The setting is configured to [Normal] when the Digital Zoom (p. 58) or Digital
Tele-Converter (p. 59) is used.
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow.
Y
P
O
% Shooting with the AF Lock
The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.
C
Lock the focus.
● Keep the shutter button pressed halfway
and press the q button.
X The focus locks and % is displayed on
the screen.
● If you release your finger from the shutter
button, and press the q button once more,
% will disappear and the focus will
unlock.
Compose the scene and shoot.
77
Magnifying the Focal Point
If you press the shutter button halfway, the AF frame will magnify and you
can check the focus.
Select [AF-Point Zoom].
● Press the n button and select [AFPoint Zoom] on the 4 tab. Use the qr
buttons to select [On].
Check the focus.
● Press the shutter button halfway.
X In [Face AiAF] (p. 76), the face selected
Y
P
O
as the main subject will appear magnified.
X In [Center] (p. 77), the contents of the
center AF frame will appear magnified.
What if the display does not magnify?
C
The display will not appear magnified in [Face AiAF] if a face cannot be detected
or is too big in relation to the screen. In [Center], it will not appear magnified if the
camera cannot focus.
The magnified display will not appear when using the Digital Zoom (p. 58)
or Digital Tele-Converter (p. 59), or when connected to a TV (p. 72).
78
0 Selecting the Person to Focus On
(Face Select)
You can select a specific person’s face to focus on and then shoot.
Set the Face Select mode.
● Point the camera toward the face and
press the 0 button.
X After [Face Select : On] displays, a face
frame
will appear around the face
detected as the main subject.
● Even if the subject moves, the
will
follow the subject within a certain range.
● If a face is not detected,
will not
appear.
Y
P
O
Select the face on which to focus.
● If you press the 0 button,
C
will move to
another detected face.
● When the frame has made a full circuit of
all detected faces, [Face Select : Off] will
appear and the AF frame mode screen will
reappear.
Shoot.
● Press the shutter button halfway. The face
frame of the selected face will change into
a green
.
● Press the shutter button fully to shoot.
Confirming the number of detected faces
Keeping the 0 button pressed will display the number of faces detected by the
camera (35 at the most) (green: main subject’s face, white: detected face).
79
Changing the Metering Mode
You can change the metering mode (brightness measuring function) to
match the shooting conditions.
Select the metering mode.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting will display on the screen.
Suitable for standard shooting conditions, including back
lit shots. Automatically adjusts the exposure to match the
shooting conditions.
Averages the light metered from the entire frame, but
Center Weighted Avg.
gives greater weight to the center.
Only meters within the
(Spot AE Point frame) that
Spot
appears at the center of the screen.
Evaluative
C
Y
P
O
& Shooting with the AE Lock
When you wish to take several shots with the same exposure, you can set the
exposure and focus separately using the AE lock. AE stands for “Auto
Exposure”.
Lock the exposure.
● Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X When & appears, the exposure will be
set.
● If you release your finger from the shutter
button and press the o button again, &
will disappear and the AE will unlock.
Compose the scene and shoot.
80
( Shooting with the FE Lock
Just as with the AE lock (p. 80), you can lock the exposure for shooting with
the flash. FE stands for “Flash Exposure”.
Select h (p. 64).
Lock the exposure.
● Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X The flash will fire and when ( appears,
the exposure will be set.
● If you release your finger from the shutter
button and press the o button again, (
will disappear and the FE will unlock.
Y
P
O
Compose the scene and shoot.
… Shooting with Slow Synchro
C
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Select ….
● After pressing the r button, press the qr
buttons to select …. Then press the m
button.
X Once set, … will appear.
● Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. It is recommended to set the [IS Mode] to [Off] when
shooting with a tripod (p. 111).
81
@ Making Dark Subjects Appear
Brighter (i-Contrast)
The camera can automatically detect and compensate for faces or subjects
that appear dark in certain shooting conditions.
Select [i-Contrast].
● Press the n button, select [i-
Contrast] from the 4 tab, and use the
qr buttons to select [Auto].
X @ will appear.
C
Y
P
O
Under some conditions, the image may appear coarse or the exposure
setting may not be suitable.
You can correct recorded images (p. 99).
82
ΠRed-Eye Correction
You can automatically correct red eyes in images taken with the flash.
Select [Flash Settings].
● Press the n button, select [Flash
Settings] from the 4 tab and press the
m button.
Adjust the setting.
● Press the op buttons to select [Red-Eye
Corr.] and press the qr buttons to select
[On].
X Πwill appear (p. 42).
Y
P
O
Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.
C
• You can correct recorded images (p. 100).
• If you press the r button as shown on the screen in Step 2 and then
press the n button, the Flash Settings screen will display.
83
≈ Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Select ≈.
● Set the mode dial to K and press the
m button.
● Press the op buttons to select U.
● Press the qr buttons to select ≈, then
press the m button.
Select the shutter speed.
● After pressing the o button, press the qr
Y
P
O
buttons to select a shutter speed, then
press the m button.
Confirm the exposure.
● When you press the shutter button
C
halfway, the exposure for the selected
shutter speed will appear.
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
• It is recommended to set the [IS Mode] to [Off] when shooting with a
tripod (p. 111).
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
84
6
Using Various Functions for
Shooting Movies
Y
P
O
This chapter provides more advanced information than the “E
Shooting Movies” and “Viewing Movies” sections of Chapter 1.
C
• This chapter assumes that the mode dial is set to E (p. 40).
85
Changing the Image Quality
You can select from among three image quality settings.
Select the image quality.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting will display on the screen.
Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
640 x 480 pixels, 30 frames/sec.
Y
P
O
640 x 480 pixels, 30 frames/sec. LP
C
320 x 240 pixels, 30 frames/sec.
Estimated Shooting Time
Image Quality
(Frame Rate)
Content
For shooting standard quality movies.
The image quality will be lower than with
,
but you can record twice the length.
Since the number of the recording pixels is
smaller, the image quality will be lower than
with
, but you can record three times the
length.
Shooting Time
128 MB (Supplied)
2 GB
8 GB
1 min. 4 sec.
16 min. 47 sec.
1 hr. 7 min. 6 sec.
2 min. 7 sec.
33 min. 2 sec.
2 hrs. 12 min. 3 sec.
3 min. 1 sec.
46 min. 33 sec.
3 hrs. 6 min. 4 sec.
• Based on Canon’s testing standards.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
86
AE Lock/Exposure Shift
In X mode, you can set the exposure or change it in 1/3 steps within a range
of ±2.
Focus.
● Press the shutter button halfway to focus.
Lock the exposure.
● Press the o button to lock the exposure.
The exposure shift bar appears.
● Press the o button again to release the lock.
Change the exposure.
● While looking at the screen, press the qr
Y
P
O
buttons to adjust the brightness.
Shoot.
Other Shooting Functions
C
The following functions can be used in the same way as for still images.
• Zooming in More Closely on Subjects (Digital Zoom) (p. 58)
You can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum zoom factor, you should adjust the
optical zoom to the maximum before shooting.
The sound of the zoom will be recorded.
• Ò Using the Self-Timer (p. 60)
• e Shooting Close-ups (Macro) (p. 65)
• u Shooting Far Away Subjects (Infinity) (p. 65)
• Adjusting the White Balance (p. 70)
• Changing the Tone of an Image (My Colors) (p. 71)
• Shooting Using a TV Monitor (p. 72)
• Î Shooting Using the Two Second Self-Timer (p. 72)
• % Shooting with the AF Lock (p. 77)
• Turning off the AF Assist Beam (p. 109)
87
Playback Functions
• Displaying the Overlay (p. 111)
[3:2 Guide] is not available.
• Changing the IS-Mode Settings (p. 111)
You can switch between [Continuous] and [Off].
• Registering Functions to the c Button (p. 112)
Playback Functions
The following functions can be used in the same way as for still images.
• Erasing Images (p. 24)
• g Searching Images by Sets of 9 (Index Display) (p. 90)
Y
P
O
• d Searching for Images Using the Jump Display (p. 91)
• . Viewing Slideshows (p. 92)
• + Changing Image Transitions (p. 94)
• Viewing Images on a TV (p. 95)
• : Protecting Images (p. 96)
C
• / Erasing All Images (p. 97)
• \ Rotating Images (p. 97)
Summary for “Viewing Movies” (p. 31)
Exit
Playback
Slow Motion Playback (you can use the qr buttons to adjust the speed. Sound
will not play back.)
Display the first frame
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Display the last frame
Displays when connected to a PictBridge compliant printer (p. 25).
Refer to the Personal Printing Guide (p. 2) for details.
88
7
Using Playback and Other
Functions
Y
P
O
The first part of this chapter explains various ways to play back and
edit images. The latter part explains how to specify images for
printing.
C
• Press the 1 button to select the Playback mode before operating the
camera.
• It may not be possible to play back or edit images that have been edited
on a computer, had their file name changed, or have been taken on a
different camera.
• The edit function (pp. 98 – 100) cannot be used if the memory card does
not have free space available.
89
g Searching Images by Sets of 9
(Index Display)
Displaying 9 images at a time lets you quickly find the image you want.
Move the zoom lever toward g.
X Images will display in an index. The
selected image will have a green frame
and be enlarged.
Select an image.
● Press the opqr buttons to select an
image.
● Moving the zoom lever toward k will
Y
P
O
display the selected image by itself.
Searching 9 Images at a Time
Move the zoom lever toward g.
C
X Images will display in an index.
Move the zoom lever toward g
again.
X The jump bar appears.
Jump Bar
Change the displayed images.
● Press the qr buttons to switch between
sets of 9 images.
● Moving the zoom lever toward k restores
the index display.
When the jump bar displays, holding the m button and pressing the qr
buttons jumps to the first or last set of images.
90
d Searching for Images Using the Jump
Display
When there are many images on the memory card, you can search them by
a specified method or image unit.
Select a jump method.
● In Single Image Playback, press the o
button.
X The search method and the position of the
currently displayed image will appear at
the bottom of the screen.
● Press the op buttons to select the
desired search method.
Y
P
O
Jump to an image.
● Press the qr buttons.
X The camera will use the selected search
Position of currently
displayed image
method to jump to an image.
C
Jump 10 Images
● To return to Single Image Playback, press
the n button.
Jumps over 10 images at a time.
Jump 100 Images
Jumps over 100 images at a time.
Jump Shot Date
Jumps to the first image in each shooting date group.
Jump to Movie
Jump to Folder
Jumps to a movie.
Jumps to the first image in each folder.
• The number of images matching the search filter will display on the right side of the
screen except for
and
.
If there are no images matching the search filter, the qr buttons will not
function.
91
. Viewing Slideshows
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slideshow].
● Press the n button and select the 1
tab, then select [Slideshow] and press the
m button.
Select a transition effect and start
the slideshow.
Y
P
O
● Press the qr buttons to select a transition
effect, then press the m button.
X The slideshow will start a few seconds
after [Loading image…] displays.
● You can pause/restart a slideshow by
pressing the m button again.
● Press the n button to stop the
slideshow.
C
Switches between images without transition effect.
Fades one image out and the next in.
The image slides out to the left and the next image appears.
• If you press the qr buttons during playback, the image will switch. If you
press and hold down the qr buttons you can fast-forward through
images.
• The power saving function does not work during slideshows (p. 41).
92
Checking the Focus
You can magnify the area of a recorded image that was inside the AF frame
or the area of a face that was detected to check the focus.
Press the l button, and switch
to the focus check display (p. 43).
X A white frame will appear where the AF
frame or face was when the focus was
set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Y
P
O
Switch frames.
● Press the 0 button to switch between
frames of detected faces.
● Press the m button to switch between
frames other than those of detected faces.
C
Change the magnification level or
location.
● Move the zoom lever toward k once.
● Use the zoom lever to change the display
size, and the opqr buttons to change
the display position while checking the
focus.
● Pressing the n button resets the
display to Step 2.
93
k Magnifying Images
Move the zoom lever toward k.
● The display will zoom in on the image and
Approximate Location
of Displayed Area
will appear. If you continue to hold
the zoom lever, it will continue to zoom in
up to a factor of 10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Move the zoom lever toward g to zoom
out or return to Single Image Playback.
● When
appears on the screen,
press the m button to switch to
.
Press the qr buttons to switch between
images at the same level of magnification.
Press the m button again to return to
.
Y
P
O
+ Changing Image Transitions
C
You can select from three transition effects when switching between images
in single image playback.
Select [Transition].
● Press the n button and select the 1
tab, then select [Transition] and use the
qr buttons to select a transition effect.
● Press the n button to accept the
setting.
Switches between images without a transition effect.
Fades one image out and the next in.
Slides images left or right when the qr buttons are pressed.
94
Viewing Images on a TV
Using the supplied AV cable, you can connect the camera to a TV to view
images you have shot.
Items to Prepare
• Camera and TV
• AV cable supplied with the camera (p. 2)
Turn off the camera and TV.
Connect the camera to the TV.
● Open the camera’s terminal cover and
White or black
Yellow
Yellow
Black
C
fully insert the plug of the supplied AV
cable into the camera’s A/V OUT terminal.
● Insert the cable plug fully into the video
input terminals as shown in the illustration.
Y
P
O
Turn on the TV and switch it to the
input to which the cable is
connected.
Turn on the camera.
● Press the 1 button to turn on the camera.
X The image will appear on the TV (nothing
will appear on the monitor of the camera).
● After you finish viewing, turn off the
camera and TV, and unplug the AV cable.
What if the images don’t properly display on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the n button, select the 3 tab and
[Video System] to switch to the correct video system.
95
: Protecting Images
You can protect important images so that they cannot be erased by the
camera (pp. 24, 28, 97).
Select [Protect].
● Press the n button, select the 1 tab
and [Protect], and then press the m
button.
Protect the image.
● Press the qr buttons to select an image,
then press the m button.
Y
P
O
X Once protected,
will appear.
● Pressing the m button again deselects
the image and
will disappear.
● To protect additional images, repeat the
C
above procedure.
● Pressing the n button will restore the
menu screen.
If you format the memory card (p. 49), protected images will also be
erased.
Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
96
/ Erasing All Images
You can select and erase all images at once. Since erased images cannot
be recovered, exercise adequate caution before erasing. Protected images
(p. 96) cannot be erased.
Select [Erase all].
● Press the n button, select the 1 tab
and [Erase all], and press the m button.
Erase all images.
● Press the qr buttons to select [OK], then
Y
P
O
press the m button.
X All images will be erased.
● Pressing the n button will restore the
menu screen.
C
\ Rotating Images
You can change the orientation of an image and save it.
Select [Rotate].
● Press the n button and select the 1
tab, then select [Rotate] and press the m
button.
Rotate the image.
● Press the qr buttons to select an image.
● The image will rotate 90° with each press
of the m button.
● Pressing the n button will restore the
menu screen.
97
= Resizing Images
You can resize images to a lower pixel setting and save the resized image
as a separate file.
Select [Resize].
● Press the n button and select the 1
tab, then select [Resize] and press the m
button.
Select an image.
● Press the qr buttons to select an image,
then press the m button.
Select an image size.
Y
P
O
● Press the qr buttons to select a size,
then press the m button.
X The [Save new image?] screen will
appear.
C
Save the new image.
● Press the qr buttons to select [OK], then
press the m button.
X The image will be saved as a new file.
Display the new image.
● When you press the n button, the
[Display new image?] screen will appear.
If you press the qr buttons, select [Yes]
and press the m button, the saved image
will display.
• You cannot resize an image to a larger size.
• You cannot resize images taken with the
and
98
settings.
@ Making Dark Subjects Appear
Brighter (i-Contrast)
Detects and compensates for dark sections of subjects or people’s faces
and saves the image as a separate file. You can select 4 levels of correction:
[Auto], [Low], [Medium] or [High].
Select [i-Contrast].
● Press the n button, select the 1 tab
and [i-Contrast], then press the m button.
Select an image.
● Press the qr buttons to select an image,
then press the m button.
Y
P
O
Select a menu item.
● Press the qr buttons to select an option,
then press the m button.
Save as a new image and display.
C
● Perform Steps 4 and 5 on p. 98.
What if the image wasn’t corrected by the [Auto] option as
well as you would like?
Select [Low], [Medium] or [High] and adjust the image.
• Under some conditions, the image may appear coarse or the exposure
setting may not be suitable.
• Repeatedly adjusting the same image may cause the quality to
deteriorate.
99
] Correcting the Red-Eye Effect
You can automatically correct red eyes in images and save them as new
files.
Select [Red-Eye Correction].
● Press the n button, select the 1 tab
and [Red-Eye Correction], then press the
m button.
X The [Red-Eye Correction] screen will
appear.
Select an image.
● Press the qr buttons to select an image.
Y
P
O
Correct the image.
● When you press the m button, red-eye
detected by the camera will be corrected
and a frame will appear around the
corrected portion.
● You can zoom the image using the
procedures in “k Magnifying Images”
(p. 94).
C
Save as a new image and display.
● Press the opqr buttons to select [New
File], then press the m button.
X The image will be saved as a new file.
● Perform Step 5 on p. 98.
• Some images may not be properly corrected.
• When [Overwrite] in Step 4 is selected, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
100
Printing from the Print List (DPOF)
You can add images to the print list (DPOF) directly after shooting or while in
playback by pressing the c button. You can print from a print list simply by
connecting your camera and printer. These selection methods comply with
the DPOF (Digital Print Order Format) standards.
Easily Add Images to the Print List with c
Select an image.
● Press the qr buttons to select an image
(excluding movies).
Press the c button.
Print list.
Y
P
O
● Press the op buttons to set the number
of prints.
● Press the qr buttons to select [Add], then
press the m button.
C
X Once added, c will appear.
● To remove an image from the print list,
select the added image and press the c
button, then press the qr buttons to
select [Remove] and press the m button.
Print Added Images
The following examples use the Canon SELPHY series printers. Please also
refer to the Personal Printing Guide (p. 2).
Number of copies to print
Connect the camera to the printer
(p. 25).
Print.
● Press the op buttons, select [Print now]
and press the m button.
X Printing will start.
● If you stop the printer during printing and
start again, it will start from the next print.
101
Selecting Images for Printing (DPOF)
You can select certain images on a memory card for printing (up to 998
images) and specify the number of print copies so they can be printed
together or processed at a photo developer service. You can then print all
the selected images at once or take the memory card to a photo developer
to order prints. These selection methods comply with the DPOF (Digital Print
Order Format) standards.
Print Settings
You can set the print type, date and file number. These settings apply to all
images selected for printing.
Select [Print Settings].
● Press the n button and select the 2
Y
P
O
tab, then select [Print Settings] and press
the m button.
Adjust the settings.
● Press the op buttons to select a menu
item, then use the qr buttons to select an
option.
X Pressing the n button accepts the
settings and restores the menu screen.
Print Type
Date
File No.
Clear DPOF data
C
Standard
Index
Both
On
Off
On
Off
On
Off
Prints one image per page.
Prints several reduced size images per page.
Prints both standard and index formats.
Prints the date from the shooting information.
–
Prints the file number.
–
Removes all print settings after printing.
–
• Some printers or photo developer services may not be able to reflect all
of the print settings in the output.
•
may display when using a memory card with print settings set by a different
camera. These settings will be overwritten by those set by your camera.
• Images with the date embedded always print with the date, regardless of
the [Date] setting. As a result, some printers may print the date twice on
these images if [Date] is also set to [On].
102
Selecting Images for Printing (DPOF)
• With [Index] selected, the [Date] and [File No.] options cannot be set to
[On] at the same time.
• The date will be printed in the style set in the [Date/Time] function in the
3 tab (p. 16).
Selecting the Number of Copies
Select [Select Images & Qty.].
● Press the n button and select the 2
tab, then select [Select Images & Qty.]
and press the m button.
Select an image.
Y
P
O
● Press the qr buttons to select an image,
then press the m button.
X You will be able to set the number of print
copies.
C
● If you select [Index],
appears.
● Press the m button again to deselect the
images.
will disappear.
Set the number of prints.
● Press the op buttons to set the number
of prints (max. 99).
● Repeat Steps 2 and 3 to select other
images and the number of prints for each.
● You cannot set the number of print copies
for Index prints. You can only select which
images to print.
X Pressing the n button accepts the
settings and restores the menu screen.
103
Selecting Images for Printing (DPOF)
Set All Images to Print Once
Select [Select All Images].
● Select [Select All Images] from the screen
in Step 1 on p. 103 and press the m
button.
Make print settings.
● Press the qr buttons to select [OK], then
press the m button.
X All images will be set to print once.
Clearing All Selections
Y
P
O
Select [Clear All Selections].
● Select [Clear All Selections] in Step 1 on
p. 103, and press the m button.
All selections will be cleared.
● Press the qr buttons to select [OK], then
C
press the m button.
X All selections will be cleared.
104
8
Customizing the Camera
You can customize various functions to suit your shooting
preferences. The first part of this chapter explains convenient and
Y
P
O
commonly used functions. The latter part explains how to change
shooting and playback settings to suit your purposes.
C
105
Changing Functions
You can customize convenient and commonly used functions from the 3
tab (p. 46).
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
● Select [Start-up Image], then press the qr
buttons to select [Off].
Y
P
O
Turning off the Power Saving Function
You can set the power saving function (p. 41) to [Off]. Setting it to [On] is
recommended to save battery power.
● Select [Power Saving], then press the m
C
button.
● Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
● If you set the Power Saving function to [Off],
be careful not to forget to turn off the camera
after use.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 41).
This also works when [Auto Power Down] is set to [Off].
● Select [Power Saving], then press the m
button.
● Press the op buttons to select [Display Off],
then use the qr buttons to select a time.
● In order to save battery power, it is
recommended to select less than [1 min.].
106
Changing Functions
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
● Select [File Numbering], then press the qr
buttons to select an option.
Continuous
Even if you shoot using a new
memory card, the file numbers are
assigned consecutively until an
image with the number 9999 is taken/
saved.
If you replace the memory card with
a new one, file numbering begins
with 0001 again.
Y
P
O
Auto Reset
• If you use a memory card already containing images, the newly
assigned file numbers may continue the existing numbering for both the
[Continuous] and [Auto Reset] settings. If you want to start over with file
number 0001, format the memory card before use (p. 49).
• Refer to the Software Starter Guide (p. 2) for information regarding
folder structure or image types.
C
Creating a Folder
You can create new folders in which to save images.
● Select [Create Folder], then press the m
button.
● Select [Create New Folder], then press the
●
qr buttons to select
.
will display on the screen (p. 42) when
shooting, and shots will be recorded into a
new folder.
107
Changing Functions
Creating Folders by Day and Time
You can set a day and time for folder creation.
● Select [Create Folder], then press the m
button.
● Select [Auto Create], then press the qr
buttons to select an interval.
● Select [Time], then press the qr buttons to
set a time.
● The new folder will be created on the set day
and time. Images shot after the creation date
are saved to the new folder.
Y
P
O
Turning off Auto Rotate
When you play back images on the camera or a computer, images shot in
vertical orientation automatically rotate and display vertically. You can turn
off this function.
● Select [Auto Rotate], then press the qr
C
buttons to select [Off].
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a shooting mode (p. 23). You can set the retraction time to
[0 sec.].
● Select [Lens Retract], then press the qr
buttons to select [0 sec.].
108
Changing Shooting Functions
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 46).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 122 – 123).
Turning off the AF Assist Beam
If the camera cannot focus in low light conditions when you press the shutter
button halfway, the lamp will automatically light to assist focusing. You can
turn off the lamp.
● Select [AF-assist Beam], then press the qr
buttons to select [Off].
Y
P
O
Turning off the Red-Eye Reduction Function
C
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
button.
● Press the op buttons to select [Red-Eye
Lamp], then press the qr buttons to select
[Off].
109
Changing Shooting Functions
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Select [Review], then press the qr buttons to
select an option.
● If you select [Off], the image will not display.
● If you select [Hold], the image displays until
you press the shutter button halfway.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
Y
P
O
● Select [Review Info], then press the qr
buttons to select an option.
Detailed
C
Focus Check
110
Displays detailed information (p. 43).
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 93).
Changing Shooting Functions
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
● Select [Disp. Overlay], then press the qr
buttons to select an option.
Grid Lines
3:2 Guide
Both
A grid overlays the display.
Gray areas appear at the top and
bottom of the screen. These areas
will not print when printing on 3:2
aspect ratio paper.
Both grid lines, and the 3:2 guide will
display.
Y
P
O
• In
mode, you cannot set [3:2 Guide] or [Both].
• Grid Lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
C
Changing the IS-Mode Settings
● Select [IS Mode], then press the qr buttons to
select an option.
Continuous
Shoot Only
Panning
Image stabilization is always on. You
can confirm the result directly on the
display, which makes it easier to
check the composition or focus.
Image stabilization is only active at
the moment of shooting.
Image stabilization only counters up
and down motion. This option is
recommended for shooting objects
moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is fixed to a
tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
111
Changing Playback Functions
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the opqr buttons to select the
function to register, then press the m button.
● Pressing the c button will call up the
registered function.
• Press
if you want to cancel a function.
• When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode or function setting.
• In
, each press of the c button records white balance data (p. 70),
and the white balance settings also change to
.
Y
P
O
Changing Playback Functions
You can adjust the settings in the 1 tab by pressing the 1 button (p. 46).
C
Selecting the Image that First Displays in
Playback
● Select [Resume], then press the qr buttons
to select an option.
Last seen
Last shot
112
Resumes with the image last viewed.
Resumes with the most recently shot
image.
9
Useful Information
This chapter introduces how to use the AC adapter kit (sold
separately), troubleshooting tips, and contains lists of available
Y
P
O
camera functions. The index also appears at the end.
C
113
Using Household Power
If you use AC Adapter Kit ACK800 (sold separately), you can use the
camera without worrying about how much charge is left in the batteries.
Turn off the camera.
Plug the cord into the camera.
● Open the cover and fully insert the
adapter plug into the camera.
Connect the power cord.
Y
P
O
● Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power
outlet.
C
Do not unplug the power cord or adapter plug with the camera turned on.
This could erase images you have taken or damage the camera.
114
Troubleshooting
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
•
•
•
•
Confirm that the batteries are properly inserted (p. 12).
Confirm that the batteries are not depleted (p. 14).
Confirm that the memory card/battery cover is securely closed (p. 13).
If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
• Battery performance decreases at low temperatures. Warm the batteries by, for
example, placing them in your pocket, taking care that the terminals do not
come into contact with any metal objects.
Lens will not retract.
Y
P
O
• Do not open the memory card/battery cover while the power is on. After closing
the memory card/battery cover, turn the power on then back off (p. 13).
TV output
Image is distorted or not showing on TV (p. 95).
Shooting
Cannot shoot.
C
• Set the mode dial to A (p. 40).
• Press the shutter button halfway (p. 19) in playback mode (p. 23).
The screen is off.
• Press the l button (p. 42).
Screen does not display properly in dark places (p. 44).
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
• When the camera is subjected to powerful light sources, the display may
darken.
• Under fluorescent lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear.
The screen turns off and you cannot shoot when you press the
shutter button halfway (p. 22).
appears when the shutter button was pressed halfway (p. 56).
• Set the [IS mode] to [On] (p. 111).
• Set the flash to h (p. 64).
115
Troubleshooting
• Increase the ISO speed (p. 69).
• Attach the camera to a tripod.
Image is blurred.
•
•
•
•
•
Press the shutter button halfway to focus, then shoot (p. 19).
Shoot the subject within the focusing distance (p. 126).
Set the [AF-assist beam] to [On] (p. 109).
Confirm that functions which you do not intend to use (macro, etc.) are not set.
Shoot using the focus lock or AF lock (pp. 74, 77).
Even when you press the shutter button halfway, the frame does
not appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and push the
shutter button halfway, or repeatedly push the shutter button halfway, the frame
will appear and the camera will focus.
Subject is too dark.
•
•
•
•
Y
P
O
Set the flash to h (p. 64).
Adjust the brightness with exposure compensation (p. 68).
Adjust the brightness with the i-Contrast function (pp. 82, 99).
Use the AE lock, or spot metering to shoot (p. 80).
Subject is too bright (overexposed).
•
•
•
•
Set the flash to ! (p. 56).
Adjust the brightness with exposure compensation (p. 68).
Use the AE lock, or spot metering to shoot (p. 80).
Reduce the light illuminating the subject.
C
Image is dark even though the flash fired (p. 22).
• Increase the ISO speed (p. 69).
• Shoot within an appropriate distance for flash photography (p. 64).
Image taken using the flash is too bright (overexposed).
• Shoot within an appropriate distance for flash photography (p. 64).
• Set the flash to ! (p. 56).
White dots appear on the image when shooting with the flash.
• Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 69).
• Depending on the shooting mode, when shooting in a high ISO speed the image
may appear rough or grainy (pp. 53, 55).
Eyes appear red (p. 83).
• Set the [Red-Eye Lamp] to [On] (p. 109). When shooting with the flash, the lamp
(on the front of the camera) lights (p. 40), and for approximately 1 second while
the camera is reducing red-eye, it is not possible to shoot. It is more effective if
the subject is looking directly at the lamp. Even better results can be obtained by
increasing the lighting in indoor settings or approaching closer to the subject.
116
Troubleshooting
The view in the viewfinder and the image taken may differ (p. 74).
• The differences will be larger when the subject is close to the lens.
Recording images to the memory card takes a long time, or
continuous shooting slows down.
• Format the memory card in the camera (p. 49).
When you can’t make settings for shooting functions or FUNC.
menu.
• The items in which settings can be made differ depending on the shooting
mode. Refer to “Functions Available in Each Shooting Mode” (pp. 120 – 121).
Cannot operate buttons.
• When the mode dial is set to 9, some buttons cannot be used (p. 27).
Shooting movies
Correct shooting time does not display, or stops.
Y
P
O
• Format the memory card in the camera, or use a memory card capable of
recording at high speeds. Even when the shooting time does not display
properly, the video recorded will be the length that it was actually shot (p. 30).
“!” displayed on the LCD monitor, and shooting ended
automatically.
Camera’s internal memory was insufficient. Try one of the following.
• Format the memory card in the camera (p. 49).
• Lower the recorded pixels (p. 86).
• Use a memory card capable of recording at high speeds.
C
Zoom does not operate.
• You can use the digital zoom while recording, but not the optical zoom (p. 87).
Playback
Cannot play back images or movies.
• If the file name or folder structure is changed on a computer, you may not be
able to play back images or movies. Refer to the Software Starter Guide (p. 2)
for information regarding folder structure or file names.
Playback stops, or audio cuts out.
• Use a card that has been formatted on this camera (p. 49).
• If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
• Depending on its capabilities, the computer may drop frames, or the audio may
cut out, when playing movies.
Cannot operate buttons.
• When the mode dial is set to 9, some buttons cannot be used (p. 28).
117
List of Messages that Appear on the Screen
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card
in the correct direction (p. 12).
Card locked!
• The SD memory card or SDHC memory card’s write protect tab is set to “Lock”.
Unlock the write protect tab (p. 15).
Cannot record!
• You attempted to shoot an image without a memory card, or with a memory card
installed incorrectly. Install the memory card in the correct direction when
shooting (p. 12).
Memory card error (p. 50)
• If this error message appears even when using the supplied memory card,
contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
Y
P
O
• There is not enough free space on the memory card to shoot (pp. 20, 51, 63, 75)
or edit images (pp. 98 – 100). Erase the images (pp. 24, 97) to open space for
new images, or insert an empty memory card (p. 12).
C
Change the battery (p. 12)
No image.
• There are no images recorded on the memory that can be displayed.
Protected! (p. 96)
Unidentified Image/Incompatible JPEG/Image too large./RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Unselectable
image
• Incompatible images cannot be magnified (p. 94), rotated (p. 97), edited (pp. 98
– 100) or added to a print list (p. 102).
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited
or added to a print list.
• Movies cannot be magnified (p. 94).
Too many marks.
• You selected more than 998 images to send in print settings. Select less than
998 images (p. 102).
118
List of Messages that Appear on the Screen
Cannot complete!
• Print settings or transfer settings could not be saved correctly. Reduce the
number of settings and try again (p. 102).
Naming error!
• The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
possible file number has already been reached (p. 107). In the 3 menu, change
[Image Number] to [Auto reset] (p. 107) or format the memory card (p. 49).
Communication error
• Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially available USB card reader to transfer the images to the computer.
To print, insert the card into the printer’s card slot.
Lens error, restart camera
Y
P
O
• A lens error was detected. Press the power button to turn the camera off and
back on (p. 40). If this error message continues to display, contact your Canon
Customer Support Help Desk as there may be a problem with the lens.
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
• A camera error was detected. Press the power button to turn the camera off and
back on (p. 40).
• If an error code displays directly after taking a picture, the shot may not have
been recorded. Check image in playback mode.
• If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
C
119
Functions Available in Each Shooting Mode
Shooting modes
Function
h
…
!
All Range
Flash (pp. 56, 64, 81)
e
Focusing Zone (p. 65)
u
Exposure Compensation (p. 68)/Exposure Shift (p. 87)
Self-Timer Mode (pp. 60, 61, 72, 73)
AF Lock (p. 77)
AE Lock (pp. 80, 87)/FE Lock (p. 81)
TV Display (p. 72)
Face Selection (p. 79)
Screen Display (p. 42)
C
Y
P
O
Ò Î
"
$ *2
Information View
No Information
Off
G
A 9
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
—
—
—
—
{
{
{
{
—
—
{
{
{
{
{
{
—
—
{
{
—
—
—
—
—
—
—
—
—
—
{
—
{
—
—
{
{
{
{
{
{
{
{
{
—
{
{
—
{
—
—
{
—
—
{
—
{
{
—
{
—
—
{
—
—
*4
—
*6
FUNC. menu
ISO Speed (p. 69)
White Balance (p. 70)
My Colors (p. 71)
Metering System (p. 80)
Drive Mode (p. 68)
Recording Pixels (pp. 66, 86)
Image Quality (Compression Ratio) (p. 66)
W
*1 … when flash fires. *2 Possible settings: 0 – 30 seconds in [Delay], and 1 – 10 shots in
[Shots]. *3 Fixed to ISO3200. *4 Fixed to
. *5 Fixed to
. *6 Fixed to
.
120
Functions Available in Each Shooting Mode
I
J
F
C
H
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
*1
*1
—
{
—
—
—
{
{
{
{
{
{
—
—
{
{
{
{
{
*1
*1
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
{
—
—
{
—
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
K
U
,
t
≈
w
y
O
P
Z
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
*1
*1
—
{
—
—
{
—
{
{
{
{
{
—
—
{
{
{
{
{
*1
*1
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
—
—
—
{
—
—
{
—
{
{
{
—
{
—
—
{
—
{
{
{
—
*1
—
{
—
{
{
{
—
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
—
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
—
—
—
{
—
{
{
{
—
{
{
{
{
—
—
{
{
{
{
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
C
Y
P
O
E
—
—
—
—
—
{
{
{
{
{
{
—
—
{
—
{
—
{
{
—
FUNC. menu
{
—
{
—
—
{
—
{
{
—
{
{
—
{
—
—
{
—
{
{
—
{
—
{
{
{
{
{
—
{
{
—
{
*3
{
—
—
{
—
{
*5
—
{
{
—
{
{
{
{
—
—
—
{
—
{ Selectable or selected automatically — Not selectable
121
Menus
4 Shooting Menu
Shooting modes
Function
AF Frame (p. 76)
AF Frame Size (p. 77)
Digital Zoom (p. 58)
AF-Point Zoom (p. 78)
AF-assist Beam (p. 109)
Flash Settings (pp. 83, 109)
i-Contrast (p. 82)
Review (p. 110)
Review Info (p. 110)
Disp. Overlay (p. 111)
IS Mode (p. 111)
Date Stamp (p. 57)
Set c button (p. 112)
Face AiAF
Center
Normal/Small
On/Off
Digital Tele-Converter (1.5x/2.0x)
On/Off
On/Off
Red-Eye Corr.
On/Off
Red-Eye Lamp
On/Off
On/Off
Off/2 – 10 sec./Hold
Off/Detailed/Focus Check
Off/Grid Lines
3:2 Guide/Both
On/Off
Shoot Only/Panning
Off/Date/Date & Time
C
Y
P
O
G
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
*1 AiAF *2 Always [On]. *3 Only when the flash is set to h. *4 Fixed to [2 sec.].
122
A 9
{
—
—
{
{
{
{
{
{
{
{
{
{
{
*2
—
{
{
{
—
—
*2
—
—
*2
—
*2
*2
*4
—
—
—
*2
—
—
—
Menus
I
J
F
C
H
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
K
U
,
t
≈
w
y
O
P
Z
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
—
{
{
{
—
—
—
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
*3
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
—
—
{
{
{
{
{
{
—
{
C
Y
P
O
E
*1
—
—
{
—
—
{
—
—
—
—
—
{
—
{
—
—
{
{ Selectable or selected automatically — Not selectable
123
Menus
3 Set up Menu
Item
Options/Summary
Mute
Volume
Start-up Image
On/Off*
Set all operation sounds (5 levels).
On*/Off
Format
File Numbering
Create Folder
Auto Rotate
Lens Retract
Formats card, erasing all data
Continuous*/Auto Reset
Create New Folder/Auto Create
On*/Off
1 min.*/0 sec.
Power Saving
Date/Time
Video System
Language
Reset All
* Default setting
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
Date and time settings
1 Playback Menu
Item
Slideshow
i-Contrast
Red-Eye Correction
Resize
Protect
Rotate
Erase all
Resume
Transition
* Default setting
Y
P
O
NTSC/PAL
Select displayed language.
Returns camera to default settings.
C
Ref. Page
p. 47
p. 47
p. 106
p. 49
p. 107
pp. 107, 108
p. 108
p. 108
pp. 41, 106
p. 17
p. 95
p. 18
p. 48
Options/Summary
Plays back images and movies automatically.
Corrects dark portions of images.
Corrects red eyes in images.
Resizes and saves images.
Protects images and movies.
Rotates images and movies.
Erases all images and movies.
Last seen*/Last shot
/ */
Ref. Page
p. 92
p. 99
p. 100
p. 98
p. 96
p. 97
p. 97
p. 112
p. 94
Options/Summary
Displays printing screen.
Selects individual images for printing.
Selects all images for printing.
Ref. Page
p. 25
p. 103
p. 104
2 Print Menu
Item
Print
Select Images & Qty.
Select All Images
124
Handling Precautions
Clear All Selections
Cancels all settings for printing.
p. 104
Print Settings
Sets the printing style.
p. 102
Handling Precautions
Equipment
• This camera is a high-precision electronic device. Do not drop it or subject
it to strong impacts.
• Never place the camera close to magnets or motors that generate strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
• If water droplets have fallen or dirt is stuck on the camera or LCD monitor,
wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
• Never use cleaners containing organic solvents to wipe the camera or
LCD monitor.
• Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact the closest Canon Customer Support Help Desk
as listed on the customer support leaflet supplied with your camera.
• When you move the camera rapidly from cold to hot temperatures,
condensation may form on the internal or external surfaces of the camera.
To avoid condensation, put the camera in an airtight, resealable plastic
bag and let it adjust to temperature changes slowly before removing it
from the bag.
• If condensation has formed, stop using the camera immediately.
Continued use may damage the camera. Remove the battery/batteries
and memory card, and wait until the moisture has completely evaporated
before resuming use.
C
Y
P
O
Memory Cards
• A memory card is a high-precision electronic device. Do not bend, apply
force or subject it to strong impacts. Doing so may corrupt image data
recorded on the memory card.
• Do not spill liquids on the memory card. Do not touch the memory card’s
terminals with your hands or metallic objects.
• Do not store memory cards near a TV, speakers or other devices that
generate magnetic fields or static electricity. Doing so may corrupt image
data recorded on the memory card.
• Do not store memory cards in hot, humid or dusty locations.
125
Specifications
Camera Effective Pixels . . . . . . . . . . . . Approx. 12.1 million
Image Sensor . . . . . . . . . . . . . . . . . . . . 1/2.3-inch type CCD (Total number of pixels:
Approx. 12.7 million)
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 (W) – 24.8 (T) mm
35mm film equivalent: 35 (W) – 140 (T) mm
f/2.7 (W) – f/5.6 (T)
Digital Zoom . . . . . . . . . . . . . . . . . . . . . Approx. 4.0x (Up to approx. 16x in combination with
the optical zoom)
Optical Viewfinder . . . . . . . . . . . . . . . . . Real-image zoom viewfinder
LCD Monitor . . . . . . . . . . . . . . . . . . . . . 2.5-inch type TFT LCD color monitor
Approx. 115,000 dots, picture coverage 100%
AF Frame Mode . . . . . . . . . . . . . . . . . . Face AiAF/Center
Focusing Range (from end of lens) . . . . Auto, Easy: 3 cm (1.2 in.) – infinity (W)/
30 cm (12 in.) – infinity (T)
Normal: 50 cm (1.6 ft.) – infinity
Macro: 3 – 50 cm (1.2 in. – 1.6 ft.) (W)/
30 – 50 cm (12 in. – 1.6 ft.) (T)
Infinity: 3 m (9.8 ft.) – infinity
Kids&Pets: 1 m (3.3 ft.) – infinity
Shutter. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical shutter and electronic shutter
Shutter Speed . . . . . . . . . . . . . . . . . . . . 1– 1/1600 sec.
15 – 1/1600 sec. (Total shutter speed range)
Image Stabilization . . . . . . . . . . . . . . . . Lens-shift type
Metering Type . . . . . . . . . . . . . . . . . . . . Evaluative, Center-weighted average or Spot
Exposure Compensation . . . . . . . . . . . . ±2 stops in 1/3-stop increments
ISO speed
(Standard Output Sensitivity,
Recommended Exposure Index). . . . . . Auto, ISO 80/100/200/400/800/1600
White Balance . . . . . . . . . . . . . . . . . . . . Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Built-in Flash . . . . . . . . . . . . . . . . . . . . . Auto, On, Slow Synchro, Off
* Red-eye reduction/Red-eye correction/FE Lock
settings available
Built-in Flash Range . . . . . . . . . . . . . . . 30 cm – 4.0 m (12 in. – 13 ft.) (W)/
30 cm – 2.0 m (12 in. – 6.6 ft.) (T)
Shooting Modes . . . . . . . . . . . . . . . . . . Auto, Easy, Program AE, Portrait, Landscape, Night
Snapshot, Kids&Pets, Indoor, Special scene mode*,
Movie
* Sunset, Night Scene, Fireworks, Long Shutter,
Beach, Aquarium, Foliage, Snow, ISO3200
Continuous Shooting . . . . . . . . . . . . . . . Approx. 1.1 images/sec.
Self-timer . . . . . . . . . . . . . . . . . . . . . . . . FaceSelf-Timer, Approx. 10-sec./Approx. 2-sec. delay,
Custom Timer
i-Contrast. . . . . . . . . . . . . . . . . . . . . . . . Auto/Off
Recording Media . . . . . . . . . . . . . . . . . . SD memory card, SDHC memory card,
MultiMediaCard, MMCplus memory card,
HC MMCplus memory card
File Format . . . . . . . . . . . . . . . . . . . . . . Design rule for camera file system and DPOF
compliant
C
126
Y
P
O
Specifications
Data Type . . . . . . . . . . . . . . . . . . . . . . . . Still images: Exif 2.2 (JPEG)
Movies: AVI (Image data: Motion JPEG, Audio data:
WAVE (Mono))
Compression . . . . . . . . . . . . . . . . . . . . . Fine, Normal
Number of Recording Pixels
(Still images). . . . . . . . . . . . . . . . . . . . . . Large: 4000 x 3000 pixels
Medium 1: 3264 x 2448 pixels
Medium 2: 2592 x 1944 pixels
Medium 3: 1600 x 1200 pixels
Small: 640 x 480 pixels
Widescreen: 4000 x 2248 pixels
(Movies) . . . . . . . . . . . . . . . . . . . . . . . . . 640 x 480 pixels (30 frames/sec.)
640 x 480 pixels (30 frames/sec. LP)
320 x 240 pixels (30 frames/sec.)
Number of Possible Shots . . . . . . . . . . . LCD monitor on: Approx. 140 images (Based on CIPA
standardized measurement)
LCD monitor off: Approx. 430 images
Playback Function . . . . . . . . . . . . . . . . . Single Image, Easy, Movie, Index, Jump, Magnified
Focus, Magnified, Slideshow
Editing Function . . . . . . . . . . . . . . . . . . . Erase, Protect, Rotate, Resize, i-Contrast, Red-Eye
Correction
Direct Print Type. . . . . . . . . . . . . . . . . . . PictBridge capable
Interface . . . . . . . . . . . . . . . . . . . . . . . . . Hi-Speed USB (Dedicated connector (female) with
unified type of digital, audio and video*)
* mini-B compatible
Video/Audio output (NTSC and PAL capable, mono
audio)
Communication Settings. . . . . . . . . . . . . MTP, PTP
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AA-size alkaline batteries
2 AA-size NiMH batteries (NB-3AH sold separately)
Operating Temperatures . . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)
Operating Humidity. . . . . . . . . . . . . . . . . 10 – 90%
Dimensions (excluding protrusions) . . . . 95.4 x 62.4 x 31.0 mm (3.76 x 2.46 x 1.22 in.)
Weight (camera body only). . . . . . . . . . . Approx. 155 g (5.47 oz.)
C
Y
P
O
• All data is based on tests by Canon.
• The finished product, or exterior may differ from this report.
127
Index
Numerics
DPOF ............................................. 101, 102
3.5" x 5" Size ............................................ 67
3:2 Guide ................................................ 111
A
AC Adapter Kit .................................. 38, 114
Accessories .............................................. 36
AE Lock .............................................. 80, 87
AF J Auto Focus
AF Frame ................................................. 21
AF Lock .................................................... 77
Aquarium (Scene Mode) .......................... 54
AV Cable .............................................. 2, 95
B
Y
P
O
Battery
Battery and Charger Kit .................. 36, 38
Charge Indicator ................................... 14
Date/Time Battery ................................. 17
Power Saving ........................................ 41
Beach (Scene Mode) ................................ 54
Black and White Images ........................... 71
C
C
Camera Shake ................................. 56, 111
Components Guide .................................. 40
Compression J Image Quality
Continuous Shooting ................................ 68
D
Date and Time
Adding to Image .................................... 57
Changing ............................................... 17
Date/Time Battery ................................. 17
Settings ................................................. 16
Date/Time J Date and Time
Default Settings ........................................ 48
Deleting J Erasing
DIGITAL CAMERA Solution Disk ......... 2, 33
Digital Tele-Converter .............................. 59
Digital Zoom ............................................. 58
Direct Print Button ............................ 25, 112
Display Language ..................................... 18
Display Overlay ...................................... 111
128
E
Editing
i-Contrast .............................................. 99
Red-Eye Correction ............................ 100
Resizing (Making Images Smaller) ....... 98
Rotating Images .................................... 97
Enlarged Display ...................................... 94
Equipment
Default Settings ..................................... 48
Holding the Camera .............................. 11
Erasing All Images ................................... 97
Erasing Images ........................................ 24
Error Messages ...................................... 118
Exposure
AE Lock ........................................... 80, 87
Correction ............................................. 68
FE Lock ................................................. 81
F
Face AiAF ................................................. 76
Face Selection .......................................... 79
Face Self-Timer ........................................ 61
Factory Settings J Default Settings
FE Lock .................................................... 81
File Number ............................................ 107
Fireworks (Scene Mode) .......................... 54
Flash
Off ......................................................... 56
On ......................................................... 64
Slow Synchro ........................................ 81
Supplementary Flash ............................ 38
Focus
AF Frame .............................................. 21
AF Frame Mode .................................... 76
AF Lock ................................................. 77
AF-Point Zoom ...................................... 78
Face Selection ...................................... 79
Focus Check ............................................ 93
Focus Lock ............................................... 74
Format J Memory Card, Formatting
Formatting (Memory Card) ....................... 49
Index
FUNC. Menu
Basic Operations ................................... 45
List ...................................................... 120
G
Green Leaves/Autumn Foliage
(Scene Mode) ........................................... 55
Grid Lines ............................................... 111
H
High Speed (ISO) ............................... 55, 69
High-Power Flash ..................................... 38
Histogram ................................................. 44
Household Power ................................... 114
I
Y
P
O
i-Contrast ............................................ 82, 99
Image Quality (Compression Ratio) ......... 66
Images
Display Time ....................................... 110
Editing J Editing
Erasing Images ..................................... 24
Playback J View
Protect ................................................... 96
Indicator .............................................. 41, 44
Indoor (Scene Mode) ................................ 53
Infinity ....................................................... 65
Interface Cable ............................... 2, 25, 33
ISO Speed ................................................ 69
ISO3200 (Scene Mode) ............................ 55
C
Menu
Basic Operations ...................................46
List ............................................. 122 – 125
Metering Mode ..........................................80
MMCplus/HC MMCplus Memory Card J
Memory Cards
Mode Dial .................................................40
Movies
Image Quality (Frame Rate) ..................86
Recording Pixels ...................................86
Shooting Time ................................. 30, 86
Viewing (Playback) ................................31
MultiMediaCard J Memory Cards
My Colors .................................................71
K
Kids&Pets (Scene Mode) ......................... 52
L
Lamp ........................................... 40, 60, 109
Landscape (Scene Mode) ........................ 52
LCD monitor J Screen
Long Exposures ........................................ 84
Long Shutter Mode (Scene Mode) ........... 84
M
Memory Cards .......................................... 15
Available Shots ............................... 15, 67
Formatting ............................................. 49
N
Night Scene (Scene Mode) ......................54
Night Snapshot (Scene Mode) .................52
Number of Shots .......................................14
P
Package Contents J Accessories
Personal Printing Guide .............................. 2
PictBridge .................................................25
Playback J View
Playback Button ........................................23
Playback With Transition Effects ..............94
Portrait (Scene Mode) ..............................52
Postcard Size ...........................................67
Power Button ............................................40
Power Saving ...........................................41
Print List (DPOF) .................................... 101
Print Settings (DPOF) .............................102
Printer .................................................25, 26
Printing .....................................................25
Program AE ..............................................64
R
Recording Pixels (Image Size) .................66
Red-Eye
Auto Correction .....................................83
Correction ............................................100
Reduction ............................................109
Resizing (Making Images Smaller) ...........98
Rotating Images .......................................97
129
Index
S
W
SCN (Scene Mode) .................................. 53
Screen
Display Language ................................. 18
Information Displayed ..................... 42, 43
Menu Operations ............................ 45, 46
Switching the Display ...................... 42, 43
SD/SDHC Memory Card J Memory Cards
Self-Timer
10 second Self-Timer ............................ 60
Changing Delay and
Number of Shots ................................... 73
Face Self-Timer .................................... 61
Two Second Self-Timer ........................ 72
Sepia Tones ............................................. 71
Shooting Date and Time J Date/Time
Shooting Using a TV ................................ 72
Shooting With Macro ................................ 65
Shutter Button .......................................... 19
Slideshow ................................................. 92
Snow (Scene Mode) ................................. 55
Software
DIGITAL CAMERA Solution Disk ...... 2, 33
Software Starter Guide ........................... 2
Transferring Images to a Computer ...... 32
Sound ....................................................... 47
Strap ..................................................... 2, 11
Sunset (Scene Mode) ............................... 54
Supplementary Flash ............................... 38
White Balance .......................................... 70
Wide (Recording Pixels) ..................... 66, 67
Wrist Strap J Strap
C
Y
P
O
T
Terminal ....................................... 25, 34, 95
Tone (White Balance) ............................... 70
Troubleshooting ...................................... 115
V
Video J Movies
Viewing (Playback)
Enlarged Display ................................... 94
Index Display ........................................ 90
Single Image Playback ......................... 23
Slideshow .............................................. 92
Viewing Images on a TV ....................... 95
Viewing Images on a TV .......................... 95
130
Z
Zoom ............................................ 20, 29, 58
MEMO
C
Y
P
O
131
Trademark Acknowledgments
• The SDHC logo is a trademark.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any
time without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• Every effort has been made to ensure that the information contained in
this guide is accurate and complete. However, if you notice any errors
or omissions, please contact the Canon customer service center
indicated on the customer support list included with the product.
• The above items notwithstanding, Canon accepts no liability for
damages due to mistaken operation of the products.
C
CDP-E071-010
Y
P
O
© CANON INC. 2009