- No category
advertisement
Illustrated
Parts Manual
Beginning S/N: 124860
Effective Date: 10.04.13
P/N 7000-12
KEY TO ABBREVIATIONS USED IN THIS MANUAL
Abbreviation What it Represents
º (Dimension) .....................................................................................................................................Degrees (Angle)
" (Dimension) .....................................................................................................................................................inches
(-) ....................................................................................................................................................Negative (Polarity)
(+) .................................................................................................................................................... Positive (Polarity)
AT ................................................................................................................................................................All-Terrain
CCW ...............................................................................................................................................Counter-clockwise
Conn. .......................................................................................................................................................... Connector
CW ...............................................................................................................................................................Clockwise
D ................................................................................................................................................................... Diameter
DC ..................................................................................................Deck, Collection (number refers to size in inches)
DM ................................................................................................... Deck, Mulching (number refers to size in inches)
DR .........................................................................................Deck, Rear Discharge (number refers to size in inches)
DS...........................................................................................Deck, Side Discharge (number refers to size in inches)
DU ...................................................................................................................................................Garlock (Bearing)
ESNA (Fastener)..........................................................................................................................Nylon Insert Locknut
FSC ........................................................................................................................................ Forward Speed Control
GA..................................................................................................................................................................... Gauge gal. ..................................................................................................................................................................... gallon
GHS ........................................................................................................................................Grass Handling System
GR (Fastener) ....................................................................................................................................................Grade
HD .............................................................................................................................................................Heavy Duty
HP ........................................................................................................................................................... Horse Power
ID ...............................................................................................................................Identification or Inside Diameter
L ........................................................................................................................................................................Length
LH ............................................................................................................Left Hand (orientated with operator on seat)
LP .............................................................................................................................................................. Low Profile mm (Dimension) .........................................................................................................................................millimeters
MS (Fastener) ......................................................................................................................................Machine Screw
NS (as part number)..................................................................................... Item is not sold by Walker Manufacturing
OD ................................................................................................................................................... Outside Diameter oz. ...................................................................................................................................................................... ounce
PFH (Fastener) ................................................................................................................................ Phillips Flat Head
P/N...........................................................................................................................................................Part Number
PPH (Fastener) ................................................................................................................................Phillips Pan Head
PTH (Fastener) ..............................................................................................................................Phillips Truss Head
PTO .................................................................................................................................................... Power Take-Off
QKS ...........................................................................................................................................................Quick Slide qt..........................................................................................................................................................................quart
RH ........................................................................................................ Right Hand (orientated with operator on seat)
SAE (Fastener) .........................................................................................................Society of Automotive Engineers
SBH (Fastener) ...................................................................................................................Socket Button Head (Bolt)
SD........................................................................................................................................................Side Discharge
SFH (Fastener) .................................................................................................................................Slotted Flat Head
SHC (Fastener)................................................................................................................................ Socket Head Cap
SHL (Fastener) .................................................................................................................................... Shoulder (Bolt)
SM (Fastener) ..............................................................................................................................Sheet Metal (Screw)
S/N........................................................................................................................................................ Serial Number
Spg. ...................................................................................................................................................................Spring
SQH (Fastener) ......................................................................................................................................Square Head
SS (Fastener) ...................................................................................................................................... Stainless Steel
ST (Fastener) ..............................................................................................................................Self-Tapping (Screw)
Term. .............................................................................................................................................................. Terminal
V .......................................................................................................................................................................... Volts
NOTE: In some instances, combinations of abbreviations may be used (e.g. PPHMS - Phillips Pan Head Machine Screw).
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
ILLUSTRATED PARTS LIST
Section of Tractor Covered
Decals
Page
Tractor Decals ..........................................................2
Body / Chassis Assemblies
Body / Chassis Assembly (GHS Models) ..................4
Rear Body Assembly (GHS Models) .........................6
Body Assembly (SD Models).....................................8
Tractor Components
Main Component Power Transmission
(GHS Models) ..................................................10
(SD Models) .....................................................12
Engine Group..........................................................14
Air Intake And Exhaust Group .................................16
Radiator Group .......................................................18
Hydrostatic Ground Drive Assemblies.....................20
Steering Control Assemblies ...................................22
Throttle Control Assembly .......................................24
Parking Brake Assembly .........................................26
GHS Group .............................................................28
Assembly (10.0) ..............................30
GHS 10.0 Bushel Catcher Assembly.......................32
Instrument Panel Assembly ....................................34
Section of Tractor Covered
Electrical Components
Page
Electrical Assembly .................................................36
(GHS 10.0 Bushel Components).............................38
Electrical Connectors ..............................................40
Maintenance
Lubrication Points ...................................................42
Wiring Schematic ....................................................44
Warranty
Limited Warranty .....................................................45
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
1
2
ITEM PART
NO. NO.
DESCRIPTION
TRACTOR DECALS
LOCATION
Walker Product Decals
2 5800 Walker Mower (4" Round)
Danger Decals Warning Decals Caution Decals
Utility Bed (one on each side)
10.0 Bushel Catcher (one on each side)
6 8600-34 Warning, Read Manual
Bridge Assembly and LH Gear Axle Drive Assembly
10.0 Bushel Catcher Mounting Frame Assembly
9 8600-4 Danger, Rotating Blower Blades Body, Near Body Chute
Maintenance Decals
Gear Axle Drive Assemblies (one on each)
Hydrostatic Drives (one on each)
10.0 Bushel Catcher Removable Screen
NOTE: All parts requiring decals are shipped with decals applied.
NO.
REQ’D. GHS
1
2
1
1
1
1
1
1
1
2
1
1
NO.
REQ’D SD
1
0
1
2
1
2
1
1
1
1
1
1
1
1
2
0
1
2
0
0
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
.
TRACTOR DECALS
SD Model
GHS Model
.
8600-23
.
8600-
Refer to Decks
Parts Manual for Deck Decals
.
Refer to Decks
Parts Manual for Deck Decals
8600-23
860 0-4
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
3
ITEM PART
NO. NO.
4
Seat Assembly
2 6103-35 Suspension Seat Mount
Rear Bumper Assembly (GHS Models Only)
*
7 7516-7 7.0 / 10.0 Rear Bumper
8 7516-5 Catcher Pivot Bushing
Body Assembly
12 7833-2 Cable Clamp (1 x 1/4)
Rubber Bumper (1.50 OD x 1.25)
Rubber Bumper (1.25 OD x .250)
Extension Spring (1/4 x 3) 24 7222
25 7383-3 Body Latch Hook (2-1/2 Side Bars)
28 5180 Edge Molding, Lever Opening
Tilt-Up Latch Assembly
***
5744-20 Spring Arm, Tilt-Up Latch
5744-15 Compression Spring (3/8 x 5/8)
Chassis Assembly
38 5267-1 Retainer Collar (1") (Includes Item # F413) 1
41 5830-3 Grease Fitting (45 Degree)
43 8037-1 Seal, Outer (1-3/4 x 1-1/8)
44 8038-1 Spacer, Tail Wheel Axle
BODY / CHASSIS ASSEMBLY (GHS MODELS)
DESCRIPTION NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
47 8035 Tail Wheel & Tire (13 x 5.00-6)
7035-1 Tail Wheel Tire (13 x 5.00-6)
8036 Tail Wheel & Hub (6 x 3.25)
7420-20 Dual Tail Wheel & Tire Assembly
(Includes Items # 42-45 & 47-49)
Tail Wheel Axle (3/4 x 10-3/8)
7070-1 Drive Tire (18 x 9.50-8)
51 7300-6 Chassis Frame (2-1/2 Side Bars)
Fasteners
5/16-18 x 1/4 Set Screw, Knurl Point
*
Rear Bumper Assembly for SD Models is not shown here.
Refer to BODY ASSEMBLY (SD MODELS), Page 8.
**
Service Part Only
***
Complete Tilt-Up Latch Assembly Kit available by ordering kit # 5747.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
BODY / CHASSIS ASSEMBLY (GHS MODELS)
Refer to
Electrical Assembly
.
.
.
.
.
.
.
.
.
.
8600-23
.
.
.
.
.
.
.
.
.
.
.
.
Refer to
GHS Group
.
8600-4
.
.
.
.
.
.
.
.
.
.
.
Refer to
Electrical
Assembly
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
5
ITEM PART
NO. NO.
REAR BODY ASSEMBLY (GHS MODELS)
DESCRIPTION
Rear Body Assembly (GHS Models)
1 8515-13 Catcher Handle Plate, LH
2 8515-14 Catcher Handle Plate, RH
3 8615-2 Catcher Support Frame, 10.0
4 7190-2 Insulation Foam Pad, RH
5 7190-1 Insulation Foam Pad, LH
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
NOTE: Rear Bumper Assembly for GHS Models is not shown here.
Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS),
Page 4.
6
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
REAR BODY ASSEMBLY (GHS MODELS)
Refer to
GHS 10.0 Bushel
Catcher Assembly
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
.
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
7
ITEM PART
NO. NO.
DESCRIPTION
BODY ASSEMBLY (SD MODELS)
Utility Bed Assembly
1 8650-10 Bed Liner (21.5 x 27.5)
2 7650-3 Utility Bed (Includes Item # 1)
3 7190-2 Insulation Foam Pad, RH
4 7190-1 Insulation Foam Pad, LH
Rear Bumper Assembly (SD Models)
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
NOTE: Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS),
Page 4 for all common parts used on both models.
8
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
Refer to
Body / Chassis Assembly
(GHS Models)
BODY ASSEMBLY (SD MODELS)
.
8600-
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
9
ITEM PART
NO. NO.
Clutch Lever Assembly
Extension Spring (1/2 x 2-1/4)
4 7368-5 PTO Belt Tightener (1.75 TAB)
7 7303-9 Clutch Actuator Block
8 5830-3 Grease Fitting (45 Degree)
Compression Spring (3/4 x 2-1/2)
PTO Drive Shaft Assembly
17 7050-11 PTO Gearbox / Flange Pulley
18 7248 Ground Drive Belt, Micro-V
19 7275-9 Quick Coupler Installation Tool
20 7275-16 Universal Joint Tube Assembly / Spline 1
22 7236-1 PTO Drive Pulley (4-1/2/3V)
(Includes Items # F168 & F226)
23 7237-30 Engine Pulley (Flywheel Mount)
Jackshaft Assembly
26 7240-4 Jackshaft Drive Pulley (3.3/3V)
(Includes Items # F067 & F171)
29 7393-7 Hydro Jackshaft Mount
7394-1 Hydro Jackshaft Mount Assembly
(Includes Items # 1, 5, 27-29 & 31)
33 7349-2 Extension Spring (3/4 x 4)
34 6325-3 Spacer Bushing (9/16)
36 7241-2 Transmission Drive Pulley (3-1/4MV)
(Includes Items # F067 & F171)
10
MAIN COMPONENT POWER TRANSMISSION (GHS MODELS)
DESCRIPTION NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Ground Drive Release Assembly
37 7245-1 Idler Pulley (3/8 Groove)
Spring Arm, Ground Drive Idler Release 1
Compression Spring (7/16 x 1/2)
Fasteners
*
Service Part Only
**
The Quick Coupler Installation Tool is used to assist the installation of the Quick Coupler Tube and PTO Shaft connection by holding the disconnect ring in the retracted position when joined to the tractor spline shaft on the PTO gearbox.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
MAIN COMPONENT POWER TRANSMISSION (GHS MODELS)
.
.
.
.
.
.
.
.
.
.
10
.
.
.
.
.
.
.
.
.
.
Refer to
GHS Group
.
.
.
.
.
Refer to
GHS Group
.
Refer to
Hydrostatic Ground
Drive Assemblies
.
.
.
.
.
Refer to
Hydrostatic Ground
Drive Assemblies
.
.
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
Refer to
Hydrostatic Ground
Drive Assemblies
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
Refer to
Engine Group
11
ITEM PART
NO. NO.
MAIN COMPONENT POWER TRANSMISSION (SD MODELS)
DESCRIPTION NO.
REQ’D
Clutch Lever Assembly
Extension Spring (1/2 x 2-1/4)
4 7368-5 PTO Belt Tightener (1.75 TAB)
7 7303-9 Clutch Actuator Block
8 5830-3 Grease Fitting (45 Degree)
Compression Spring (3/4 x 2-1/2)
PTO Drive Shaft Assembly
17 7050-11 PTO Gearbox / Flange Pulley
18 7248 Ground Drive Belt, Micro-V
19 7275-9 Quick Coupler Installation Tool
20 7275-16 Universal Joint Tube Assembly / Spline 1
22 7236-1 PTO Drive Pulley (4-1/2/3V)
(Includes Items # F168 & F226)
23 7237-30 Engine Pulley (Flywheel Mount)
Jackshaft Assembly
26 7240-4 Jackshaft Drive Pulley (3.3/3V)
(Includes Items # F067 & F171)
29 7393-7 Hydro Jackshaft Mount
7394-1 Hydro Jackshaft Mount Assembly
(Includes Items # 1, 5, 27-29 & 31)
33 5221-1 Extension Spring (3/4 x 5)
34 6325-3 Spacer Bushing (9/16)
36 7394-6 Idler Pulley Spring Mount
37 7833 Cable Clamp (7/8 x 1/4)
38 7241-2 Transmission Drive Pulley (3-1/4MV)
(Includes Items # F067 & F171)
ITEM PART
NO. NO.
DESCRIPTION
12
NO.
REQ’D
Ground Drive Release Assembly
40 7245-1 Idler Pulley (3/8 Groove)
Spring Arm, Ground Drive Idler Release 1
Compression Spring (7/16 x 1/2)
Fasteners
*
Service Part Only
**
The Quick Coupler Installation Tool is used to assist the installation of the Quick Coupler Tube and PTO Shaft connection by holding the disconnect ring in the retracted position when joined to the tractor spline shaft on the PTO gearbox.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
MAIN COMPONENT POWER TRANSMISSION (SD MODELS)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Refer to
Hydrostatic Ground
Drive Assemblies
.
.
.
.
Refer to
Hydrostatic Ground
Drive Assemblies
.
.
.
.
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
Refer to
Hydrostatic Ground
Drive Assemblies
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
Refer to
Engine Group
13
ITEM PART
NO. NO.
DESCRIPTION
Engine Assembly
6 7341 Throttle Cable Mount Bracket
Fuel Tank Assembly
14 5879-2 Hose Clamp, Silver (7/16)
15 7840-2 Hose Clamp (1/4 to 5/8)
Fuel Filter (19204-43010 Kubota)
Fuel Filter (15231-43560 Kubota)
Fuel Pump (12691-52031 Kubota)
26 5020-2 Fuel Filter, In Tank
27 8046-3 Fuel Tank, 4.7 Gallon, Diesel
28 7082-1 Fuel Tank Cap, Diesel
ENGINE GROUP
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
*
Service Part Only
**
Required hose specifications:
M111 - 1/4" ID fuel/oil/vapor hose (Gates 4219-0103 or equivalent)
M113 - 3/16" ID fuel/oil/vapor hose (Gates 4219-0093 or equivalent)
M247 - 5/16" ID low permeation (<15g/m^2/day) fuel hose
(Parker 38905 or equivalent)
NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts.
NOTE: Decals for this assembly are not shown here. Refer to
TRACTOR DECALS, Page 2 for Decal listing and placement information.
14
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
ENGINE GROUP
.
Refer to Air Intake
And Exhaust Group
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
.
.
Refer to Air Intake
And Exhaust Group
Refer to
Electrical Assembly
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
15
ITEM PART
NO. NO.
Precleaner Assembly
1 7026-2 Remote Precleaner (Includes Item # 2) 1
2 7840-5 Hose Clamp (1-1/2 to 2)
3 7028-5 Precleaner Tube, 1-3/4 / GHS
4 7440 Shock Mount (1.0 OD x 3/4)
5 7028-20 Rear Precleaner Mount
(Includes Items # 9-13, 16 & 17)
10 5090-1 Air Cleaner Cartridge
11 5088-5 Air Cleaner Draw Latch
16 5091-9 Street Elbow 90° (1/8 x 1/8)
17 5091-0 1/8 Pipe Thread Male W/Barb
19 5091-13 Air Flow Indicator W/Bracket
Exhaust Assembly
Spring Washer (04512-50080 Kubota) 4
(Includes Items # 20, F002 & F025)
Muffler Gasket (15371-12370 Kubota)
28 7306-15 Water Temperature Sender
29 7306-12 Temperature Sender Adapter
30 7306-13 Oil Pressure Switch
Oil Filter (15841-32439 Kubota)
32 7047-2 Manifold Heat Shield
DESCRIPTION
AIR INTAKE AND EXHAUST GROUP
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
*
Two (2) F009 and two (2) F255 fasteners are reused from
Clutch Lever Assembly. Refer to MAIN COMPONENT
POWER TRANSMISSION (GHS OR SD MODELS), Pages
10 or 12.
**
One (1) F012 and one (1) F038 fastener are reused from Rear
Bumper Assembly. Refer to BODY / CHASSIS ASSEMBLY
(GHS MODELS), Page 4.
***
GHS Models Only
Δ
Required hose specifications:
M258 - 7/64" ID automotive vacuum hose
NOTE: Decals for this assembly are not shown here. Refer to
TRACTOR DECALS, Page 2 for Decal listing and placement information.
16
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
.
AIR INTAKE AND EXHAUST GROUP
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Refer to
Engine Group
(GHS Models Only)
.
Refer to
Body / Chassis Assembly
(GHS Models)
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
17
ITEM PART
NO. NO.
DESCRIPTION
RADIATOR GROUP
NO.
REQ’D
Radiator Assembly
1 7840-4 Hose Clamp (3/4 to 1-1/2)
3 7840-3 Hose Clamp (1/2 to 1-1/4)
Coolant Recovery Tank and Hose
10 5975-3 Cable Tie (50# x 7")
18 7429-7 Fan Blade Replacement
13 7431-1 Radiator Channel Seal (1/4 x 1/2 x 13.5) 2
21 7434 Washer (3/8 x 1-1/4 x 1/4)
22 7427-7 Debris Shield, Shroud
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
F089
F143
F222
F237
F254
Belleville Washer, SS
10-32 x 1/4 Whiz Lock Bolt
Thrust Washer
Spring Ring
Fender Washer
*
Service Part Only
**
Required hose specifications:
M110 - 7/32" ID EDM Hose
NOTE: Decals for this assembly are not shown here. Refer to
TRACTOR DECALS, Page 2 for Decal listing and placement information.
*
*
*
*
*
18
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
.
RADIATOR GROUP
Refer to
Engine Group
.
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
.
Refer to
Body / Chassis Assembly
(GHS Models)
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
19
ITEM PART
NO. NO.
HYDROSTATIC GROUND DRIVE ASSEMBLIES
DESCRIPTION NO.
REQ’D
Transmission Lockout Assembly
1 5028-3 Transmission Lockout Assembly
(Includes Items # 2-5, F023, F027 & F081)
Ground Drive Assemblies
8 7394-7 Throttle Cable Mount Bracket
10 5025 Hydrostatic Drive, CCW (700-052)
12 6200-9 Gear Axle Drive Assembly
13 6207-12 Pipe Plug (1/4 NPTF)
(Includes Items # F064 & F359)
20 5026 Hydrostatic Drive, CW (700-051)
Deck Support Arm Assemblies
22 6431-1 Deck Support Arm, LH
24 6431-2 Deck Support Arm, RH
27 6840-1 Support Arm Bushing (2-1/16)
ITEM PART
NO. NO.
DESCRIPTION
Transmission Repair Parts
29 5025-8 Bearing, Input Shaft
34 5023 Transmission Reservoir Kit
36 5025-6 O-Ring & Plug Assembly
Fasteners
7/16 Internal Star Lock Washer
External Snap Ring (.669 Shaft)
3/8-16 x 4 Hex Bolt All Thread
*
Service Part Only
**
Part not used on Jackshaft side of tractor.
NO.
REQ’D
20
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
.
.
.
HYDROSTATIC GROUND DRIVE ASSEMBLIES
.
.
.
.
.
Refer to
Main Component Power
Transmission (GHS Models)
.
.
.
.
.
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
21
ITEM PART
NO. NO.
Transmission Spring Assemblies
1 6201-2 Shock Mount Gear Drive, RH
3 6199-3 Steering Lever Dampener Assembly
4 6201-1 Shock Mount Gear Drive, LH
5 5214-2 Ball Joint (5/16-24) Nylon Lined
6 6212-1 Transmission Control Arm, LH
8 5665-1 Compression Spring (2-1/2)
9 5463-2 Steering Lever Actuator
10
7201-2 Fiberglide Bearing 1/2"
11
12
5212 Transmission Control Arm, RH
Steering Lever & FSC Assemblies
Bearing, Delrin (.255 ID x .379 OD x .250) 1
FSC Friction Washer (1-1/2 x 3/8 x 1/16) 2
18
19
(Includes Items # 15-19, F192 & F193)
20 5850-2 Handle Grip, Foam (5-1/2)
21
5223 Extension Spring (1/4 x 5-1/2)
23
24
5217 Pivot Pin, Steering Lever 1
25 5451-10 Steering Lever Assembly, LH / Adjustable 1
(Includes Items # 9, 10, 16, F360 & F489)
5451-7 Steering Lever Arm, LH / Adjustable
2 26 5453-10 Steering Lever Handle, Adjustable
Extension Spring (3/4 x 6-3/4)
29 5281-5 Clevis Pin (1/4 x 0.80)
DESCRIPTION
STEERING CONTROL ASSEMBLIES
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
30 5470-1 Speed Control Stop 1
31 5450-10 Steering Lever Assembly, RH / Adjustable 1
(Includes Items # 9, 10, 16, F360 & F489)
5450-7 Steering Lever Arm, RH / Adjustable
34 5975-3 Cable Tie (50# x 7")
Fasteners
*
Service Part Only
2
22
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
STEERING CONTROL ASSEMBLIES
.
Refer to
Hydrostatic Ground
Drive Assemblies
.
Refer to
Electrical Assembly
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
Refer to
Hydrostatic Ground
Drive Assemblies
23
ITEM PART
NO. NO.
DESCRIPTION
THROTTLE CONTROL ASSEMBLY
NO.
REQ’D
Throttle Control Assembly
6 5108-10 Friction Washer (.125)
7 5108-1 Control Lever, Throttle
8 5108-5 Throttle Control Knob, Red
9 5108-11 Friction Washer (.062)
(Includes Items # 5-7, 9, 10 & F201)
Throttle Control and Cable Assembly
(Complete Control and Cable Assembly)
(Includes Items # 2, 4, 8, 11 & F232)
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
*
Service Part Only
NOTE: Decals for this assembly are not shown here. Refer to
TRACTOR DECALS, Page 2 for Decal listing and placement information.
24
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
THROTTLE CONTROL ASSEMBLY
.
8600-23
860
0-4
Refer to
Body / Chassis Assembly
(GHS Models)
Refer to
Engine Group
.
.
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
25
PARKING BRAKE ASSEMBLY
ITEM PART
NO. NO.
DESCRIPTION
Parking Brake Assembly
2 7406-8 Parking Brake Lever (4-1/4)
Compression Spring (1/2 x 3/4)
Rubber Dust Shield (5/8 x 3/8 x 1/32)
11 5567-3 O-Ring Seal (1/4 x 3/8)
12 7403 Plunger Bushing, Gear Axle
13 7404-7 Brake Actuator Mount
Brake Control Cable, LH (25.5")
Brake Control Cable, RH (20.5")
NO.
REQ’D
ITEM PART
NO. NO.
Fasteners
DESCRIPTION
NO.
REQ’D
26
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
.
PARKING BRAKE ASSEMBLY
Refer to
Body / Chassis Assembly
(GHS Models)
8600-18
.
8600-4
.
.
.
.
.
.
.
.
.
.
.
.
Refer to
Hydrostatic
Ground Drive
Assemblies
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
27
ITEM PART
NO. NO.
DESCRIPTION
Delivery Chute Assembly
2 5592-13 Backing Plate, Grass-Pak
5 8511-1 Delivery Chute W/Clips / 10.0
(Includes Items # 3, 4, 6, F362 & F411)
6 5578-10 Front Clip, Chute Mount
7 7530-4 Body Chute (10.5 Blower)
Blower Belt Tightener Assembly
(Includes Items # F075, F114 & F231)
9 7234-2 Blower Belt (Micro-V)
10 7239-1 Blower Pulley (Micro-V)
(Includes Items # F067, F075 & F114)
13 5830-3 Grease Fitting (45 Deg.)
14 7364-1 Blower Belt Tightener Arm
Blower Assembly
(Includes Items # 19, 21-25, F004, F009,
F029, F050, F131, F168 & F426)
21 7543-3 Blower Housing (10.5)
22 7545-2 Blower Output Shaft (10.5)
24 7543-1 Blower Faceplate (10.5)
25 7526 Intake Tube (10.5 Blower)
26 7528-2 Skid Bar (10.5" Blower)
28 7833 Cable Clamp (7/8 x 1/4)
GHS GROUP
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
1/4 x 3/4 Woodruff Key (# 806)
A/A62D Alum. Pop Rivet (3/16D x 13/32L) 2
*
Service Part Only
**
Plugs Blower when GHS is not in use. Furnished only with
Mulching Decks, SD Decks used on a GHS Tractor, Rotary
Broom Attachment and Snowblower Attachment. Use of this part may be replaced by installing Blower Lockout Kit (P/N
7541).
NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts.
28
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
.
.
.
.
.
.
.
GHS GROUP
Refer to
Electrical Connectors
Refer to
Electrical Assemblies
(GHS 10.0 Bushel Components)
.
.
.
.
.
Refer to Main
Component Power
Transmission
(GHS Models)
.
.
.
.
.
.
.
.
.
Refer to
Body / Chassis Assembly
(GHS Models)
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
29
ITEM PART
NO. NO.
DESCRIPTION
GHS POWERFIL
®
ASSEMBLY (10.0)
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION
10.0 GHS Powerfil
®
Assembly
1 5551-3 Bearing Cap, Powerfil
2 5551-1 Pivot Bearing (#S3PP)
3 5518-2 Pivot, Delivery Spout
8 5553-1 Compression Spring (1/2 x 2)
10 5519-3 Motor Mount Nut (5/8-24)
13 5976-2 Grommet (3/16 x 3/4)
14 5519-5 Actuator Motor (12V)
Fasteners
*
Service Part Only
NO.
REQ’D
30
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
GHS POWERFIL
®
ASSEMBLY (10.0)
.
.
.
Refer to
Electrical Assemblies
(GHS 10.0 Bushel Components)
.
.
.
Refer to
Electrical Assemblies
(GHS 10.0 Bushel
Components)
.
.
.
.
.
.
Refer to
GHS Group
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
31
ITEM PART
NO. NO.
Upper Baffle Screen Assembly (Removable)
1
7512-2 Removable Screen (3/16 Hole)
(Includes Items # 2, 5, F025 & F190)
Knob / Threaded Insert (10-24)
8606-20 C-Channel With Spring (10.0)
(Includes Items # 7, 8 & F340)
10.0 Exhaust Deflector Door Assembly
12
13
14
(Includes Items # 10-14, 16, 17,
15
16
17
GHS 10.0 Bushel Catcher Assembly
22 8608-1 Outside Box Strap, LH
24 8608-4 Center Frame Doubler
25 8608-11 Catcher Door Finger
27 8610-4 Catcher Dump Flap W/Plate 10.0
28 8610-3 Backing Plate, Dump Flap
31 5801-3 Decal Plate, Round (Set of 2)
32 7620-3 Pivot Bushing (1/2 x 9/16)
34 5103-7 Outside Torsion Bushing
36 5214-12 Ball Joint (5/16-24)
38
40 8155-1 Gas Spring Cover, LH
32
GHS 10.0 BUSHEL CATCHER ASSEMBLY
DESCRIPTION NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
45 8608-10 Box Support, Gas Spring
46 7532-1 Handle, Catcher Lift
49 8602-3 10.0 Catcher W/O Powerfil
8602-4 10.0 Catcher W/Powerfil
8610-5 10.0 Bushel Catcher Box, Gray
51 8155-2 Gas Spring Cover, RH
5598-2 Optional Dump Bag (Not Shown)
May be ordered as an option. Contact your Walker dealer.
Fasteners
5/16-18 x 3/4 SBH Cap Screw, SS
3/16 x 3/8 Aluminum Rivet, Black
*
Service Part Only
**
This screen can be replaced by P/N 7512-3 Removable
Screen (3/4" holes) for improved air flow performance in wet conditions.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
GHS 10.0 BUSHEL CATCHER ASSEMBLY
.
.
.
.
.
Refer to
Rear Body Assembly
(GHS Models)
.
.
.
F079
Refer to
Rear Body Assembly
(GHS Models)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
33
ITEM PART
NO. NO.
DESCRIPTION
INSTRUMENT PANEL ASSEMBLY
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION
Instrument Panel Assembly
1 7307-2 Instrument Panel Cover (Optional)
7396-1 Instrument Panel Assembly
(Includes Items # 2-4, 6-16, 25-27,
3 7307-8 Panel Faceplate W/Decal
6 7960-5 Ignition Switch (with Keys)
7 8996-9 Red Indicator Light Assembly
8 7941-3 Boot, Circuit Breaker
9 7941-5 Circuit Breaker (7 Amp)
10 7941-2 Circuit Breaker (10 Amp)
12 5995 Toggle Switch (Off-On)
14 7306-14 Water Temperature Gauge
16 7947-3 Wire Harness, Instrument Panel
17 5975-1 Cable Tie (18# x 3-3/4")
18 7307-1 Shock Mount (1.0 x .25)
21 7977-1 Grommet (1/8 x 1-1/16)
NO.
REQ’D
22 7307-16 Lining, Panel Box (1/8)
23 6941-6 Relay Switch (30/40 Amp)
Fasteners
J Clip, Instrument Panel C15520-6A
*
Service Part Only.
**
May be ordered as an option. Contact your Walker dealer.
NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts.
34
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
INSTRUMENT PANEL ASSEMBLY
DETAIL B
YEL/RED
RED
BLU
BLK
GRA
DETAIL C
RED
ORG
RED
RED
BLU RED
B
To Wiring
Harness
To Wiring
Harness
PUR
DETAIL A
BLU
A
DETAIL H
DETAIL D
RED
PUR
RED
YEL/GRN
DETAIL E
RED
BLK
DETAIL F
RED
BLK
F
BLU/RED
BLK
DETAIL G
GRA
BLK
RED
GRA
RED
H
G
.
BLK
E
D
BLU
GRA
RED
C
RED
RED
RED
ORG
.
BLK
RED
I
J
DETAIL I
ORG/WHT
DETAIL J
BLU/RED BLK
RED
RED
YEL/GRN
GRA
YEL
RED
.
.
END VIEWS ARE SHOWN FROM BACK OF PLUG
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
35
ITEM PART
NO. NO.
DESCRIPTION
Battery Assembly
1 5975-1 Cable Tie (18# x 3-3/4")
2 5933 Battery Terminal Insul., Red (+)
3 5844-3 Battery Hold-Down Bar
Battery Terminal Insul., Black (-)
Harness Assembly
11 5942-4 PTO Safety Switch (NO)
Wire Harness (9.5/10.0) 14 8950
15 7938 Lead Wire (Battery Charge)
16 7306-10 Switch (235 Deg., 1/4-18 NPT)
17 7306-11 Switch (205 Deg., 3/8-18 NPT)
18 6942 Relay Switch (30/40 Amp) NC
19 7433-2 Resistor, 50 Watt / .4 OHM 1%
20 7833 Cable Clamp (7/8 x 1/4)
23 7428-2 Fan Control Module W/P Plug
25 6941-6 Relay Switch (30/40 Amp)
28 7834-2 Wire Saddle (2 Wires)
31 7857-10 Breaker, Mount Bracket
32 7941 Circuit Breaker (40 Amp)
33 7940-5 Circuit Breaker Jumper
ELECTRICAL ASSEMBLY
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
*
Service Part Only
NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts.
NOTE: Decals for this assembly are not shown here. Refer to
TRACTOR DECALS, Page 2 for Decal listing and placement information.
36
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
ELECTRICAL ASSEMBLY
.
.
.
GRA
DETAIL A
RED
BLK/WHT
BLK
F
.
.
GRN
DETAIL D
BLK
Refer to
Electrical Assemblies
(GHS 10.0 Bushel Components)
DETAIL B
Refer to
Main Component
Power Transmission
(GHS or SD Models)
A
RED BRN
YEL
RED/BLK GRN
YEL
BLK
RED
RED/BLK BLK
.
.
.
.
.
.
B
C
D
RED
RED
.
RED
G
GRN
BRN
BRN
BLK
ORG
GRA
DETAIL H
BRN
BLK
ORG/WHT
GRA
RED
PUR
BLU/RED
GRN
DETAIL I
H
DETAIL C
YEL
GRA
YEL/GRN
BLK
BRN YEL
Refer to
Engine Group
GRA
I
J
Refer to
Instrument Panel
Assembly
DETAIL J
ORG
BRN
RED
BLK/WHT
BRN
ORG
ORG/GRN
BLK
.
Refer to
Air Intake And
Exhaust Group
RED
YEL/GRN
BLU/RED
ORG
YEL
ORG/
WHT
RED
GRA
Refer to
Radiator Group
Refer to
Engine Group
.
.
BLK
GRN
K
YEL
DETAIL K
GRA
BLK
GRN
.
E
YEL
Refer to
Engine Group
DETAIL E
BLK/WHT
DETAIL F
GRN
YEL
BLK
DETAIL G
PUR
BLK
BLK ORG/GRN
BLU
.
.
BLK
BRN
END VIEWS ARE SHOWN FROM THIS DIRECTION
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
37
.
ITEM PART
NO. NO.
ELECTRICAL ASSEMBLIES (GHS 10.0 BUSHEL COMPONENTS)
DESCRIPTION
10.0 Harness Components
2 5975-1 Cable Tie (18# x 3-3/4")
6 8950 9.5 / 10.0 Wire Harness
7 5977-2 Grommet, Cut (1/8 x 3/8)
Grass-Pak
®
Switch Assemblies
8 5594-6 Aluminum Shaft & Vane Assembly
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
Fasteners
*
Service Part Only
NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts.
38
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
ELECTRICAL ASSEMBLIES (GHS 10.0 BUSHEL COMPONENTS)
Refer to GHS
Powerfil Assembly (10.0)
Refer to
BLK/WHT
.
GHS 10.0 Bushel
Catcher Assembly
A
.
BLK
Refer to
GHS 10.0 Bushel
Catcher Assembly
RED to (+)
.
Refer to
BLK to (-)
GHS 10.0 Bushel Catcher Assembly
Refer to
B
Electrical Assembly
BLK
BLK/WHT
BLK
DETAIL A
RED
WHT
DETAIL B
BLK/WHT
BLK
END VIEWS ARE SHOWN FROM THIS DIRECTION
Refer to
GHS Group
.
Refer to
GHS Group
.
.
.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
39
ITEM PART
NO. NO.
DESCRIPTION
Electrical Wiring Service Parts
1 5996-1 16-14 GA Butt Connector
2 5996-11 12-10 GA Butt Connector
3 7942-14 16-14 GA Shrink Connector
4 7942-13 12-10 GA Shrink Connector
5 5995-1 Wire Terminal Adapter
6 5996-4 16-14 GA Bullet Conn., Male
7 5996-5 16-14 GA Bullet Conn., Female
8 5940-4 16-14 GA Spg. Loaded Term., Female
10 5996 1/4 x 16-14 GA QKS Term., Female
11 5996-2 3/16 x 22-18 GA QKS Term., Female
12 7996 16-14 GA QKS Term., Female
13 5940-5 16-14 GA Spg. Loaded Term., Male
14 5996-0 1/4 x 22-18 GA QKS Term., Male
15 5996-18 16-14 GA Ring Term. (#8) Nylon Insulated
16 7996-1 1/4 x 16-14 GA QKS Term., Male
17 5996-8 6 GA Ring Lug (5/16)
18 5996-9 22-18 GA Ring Term., #10
19 5996-10 16-14 GA Ring Term. (5/16)
20 5996-12 12-10 GA Ring Term. (5/16)
21 5996-13 16-14 GA Ring Term., # 10
22 5996-15 12-10 GA Ring Term. (1/2)
23 5996-16 6 GA Ring Terminal (1/4)
24 5996-17 16-14 GA Ring Term. (1/4)
25 5996-20 12-10 GA Ring Term. (1/4)
26 5996-21 12-10 GA Ring Term., #10
27 7942-4 Single Connector, Male
ELECTRICAL CONNECTORS
NO.
REQ’D
ITEM PART
NO. NO.
DESCRIPTION NO.
REQ’D
29 7942-1 2-Way Locking Connector, Female
30 7942-2 2-Way Connector, Male
31 7942-3 2-Way Connector, Female
32 7942-10 2-Way Locking Connector, Male
33 5940-8 3-Way Connector, Male
34 7942-9 3-Way Connector, Male
35 8944 3-Way Locking Connector, Male
36 8944-1 3-Way Locking Connector, Female
37 7942-11 4-Way Connector, Male
38 7942-12 4-Way Connector, Female
39 7942-5 5-Way Connector, Male
40 5940-2 5-Way Connector, Male
41 8942-1 5-Way Connector, Female
42 7942-6 6-Way Connector, Male
43 7942-7 6-Way Connector, Male
44 7942-8 8-Way Connector, Male
45 8942-2 8-Way Connector, Female
46 8942-3 5-Way Connector, Male
48 7942-15 6-Way Connector (Female)
50 7940-4 Packard Plug (Female)
*
Service Part Only
NOTE: Not all Electrical Connectors are used with all assemblies.
NOTE: Refer to ELECTRICAL ASSEMBLY, Page 36 for locations of Wiring Harness and of all Electrical Wiring Service
Parts.
40
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
ELECTRICAL CONNECTORS
41
ITEM
NO.
LOCATION
LUBRICATION POINTS
LUBRICATION
TYPE
NO.
PLACES
Lubrication Points
9 Universal Joint Tube Assembly Grease
11 Universal Joint Quick Connect Grease
13 PTO Clutch Lever Pivot Grease
14 Brake Actuator Rod and Brake Oil
ITEM
NO.
LOCATION LUBRICATION
TYPE
NO.
PLACES
17 Throttle Control Cable Ends
21 Engine Dipstick / Oil Filler
*
Grease every eight (8) hours.
**
See MDD Operator’s Manual for procedure for checking and changing oil in Engine Crankcase, Hydrostatic Transmissions and Gear Axles.
NOTE: See Model MDD Operator’s Manual for proper lubrication intervals.
42
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
LUBRICATION POINTS
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
43
44
WIRING SCHEMATIC
OPTIONAL
LIGHT RED
SWICH
FUEL
PUMP
BLK/WHT
BLK
YEL
RED
BLK/WHT
BLK
BLK/WHT
BLK
BLK
GRN
TIME
DELAY
MODULE
YEL
RED
BLK
BRN
GRN
YEL
RED
RED/BLK
BRN
ORG
GRN
SEAT
SWITCH
YEL
GRN
87
85 86
30
RELAY - C
RED
+
RED
BLK
GRN
RED
RED
CIRCUIT
BREAKER
40 AMP
CIRCUIT
BREAKER
RED
RED
REVERSING
MODULE
GRA
BRN
ORG/WHT
BLK
BLK
BATTERY
BLK
_
BLK
FSC
NEUTRAL
INTERLOCK
SWITCH
ORG/GRN
CHASSIS
GROUND
R
BLK/WHT
BLK/WHT
RED
BLK
BLK
GRASS PAK
SWITCH
R
BLK/WHT
BLK
-
HORN
+
YEL
RED
ALTERNATOR
RED
ORG
STARTER
STARTER SOLENOID
BLU/RED
PUR
WATER
TEMP
SWITCH 1/4"
GRN GRN
GRN
WATER TEMP
GAUGE SENDER
WATER
TEMP
SWITCH 3/8"
GRN
YEL/GRN
GLOW PLUGS
BRN
YEL
BLK
GRA
85
30
RELAY - D
86
GRN
87
87A
GRA
FAN
RED/BLK
BLK
FUEL
SOLENOID
ENGINE
BLK BLK
RESISTOR
WALKER MODEL D21d
Beginning S/N 2011-108842
OFF
GLOW PLUG
START
RUN
IGNITION SWITCH CIRCUITS
ALL OPEN
30 + 19 + AC
30 + 17 + 50 + AC
30 + AC
30 = BATTERY
17 = START / REVERSING MODULE
19 = GLOW PLUGS
50 = START
AC = FUEL PUMP, FUEL SOLENOID
GAUGES, AND FAN
RELAY - A
FUEL SOLENOID START RELAY (PULL)
OFF
GLOW PLUG
START
RUN
30 + 87A
30 + 87
30 + 87
30 + 87
OFF
GLOW PLUG
START
RUN
RELAY - B
WARNING RELAY
30 + 87A
OPEN
30 + 87A
30 + 87A
FUEL SOLENOID RUN RELAY (HOLD)
OFF
GLOW PLUG
START
RUN
RELAY - C
OPEN
30 + 87
30 + 87A
30 + 87A
OFF
RUN (LOW)
RUN (HIGH)
RELAY - D
FAN SPEED CONTROL
30 + 87A
30 + 87A
30 + 87
OFF
START
PTO ON
RELAY - E
START/TIME DELAY RELAY
30 + 87A
30 + 87A
OPEN
RED
OPTIONAL
LIGHT
BLK
YEL/GRN
GRA
YEL
BLU/RED
PUR
RED
RED
BLK
YEL/GRN
YEL/GRN
GRA
YEL
BLU/RED
PUR
PUR
RED
RED
GRA
LIGHTS
GRA
VOLTAGE
METER
G I
RED
HOUR
METER
+ -
BLK
RED
BLK
RED
10 AMP
CIRCUIT
BREAKER
GRA
YEL
RED RED
BLK
WATER
TEMP
RED
BLU/RED
G
S
I
RED
RED RED
RED
RED
ORG/WHT
7 AMP
CIRCUIT
BREAKER
RED
RED
RED
YEL/RED
85
30
86
BLK
87
87A
RELAY - B
BLU
BLK/WHT
YEL/GRN
PUR
PUR
-
+
BLU
OIL
PRESSURE
LIGHT
YEL/GRN
RED
RELAY - A
RED
86
30
ORG
87
85
87A
ORG
BRN
WATER
TEMP
LIGHT
PUR
ORG
YEL/RED
BRN BRN
85
87A
30
86
RELAY - E
BLU
RED
GRA
IGNITION
17
19
50
30
AC
BLK
RED
RED
FOR
TAIL
WHEEL
LOCK
RED
Beginning S/N 124860
Effective Date 10-04-13
Use only genuine Walker
®
replacement parts.
LIMITED WARRANTY
FOR
WALKER
COMMERCIAL RIDER MOWER
1. WHAT THIS WARRANTY COVERS, AND FOR HOW LONG:
Walker Manufacturing company will, at its option, repair or replace, without charge, any part covered by this warranty which is found to be defective in material and/or workmanship within one (1) year* after date of sale to the original retail purchaser unless the product is used for rental purposes, in which case this warranty is limited to ninety (90) days. At Walker’s request, customer will make the defective part available for inspection by Walker and/or return the defective part to Walker, transportation charges prepaid. All parts and components of the Walker Mower are covered by this warranty except the following components which are warranted separately by their respective manufacturers:
Kubota Engine
Battery
The available warranties covering these items are furnished with each mower. Walker does not assume any warranty obligation, liability or modification for these items, which are covered exclusively by the stated warranty of the respective manufacturers noted above.
* Extended warranties are offered for the following powertrain components:
•
A three (3) year unlimited hour warranty is offered for the Walker P/N 6200-9 Gear Axle Assembly.
•
A three (3) year or 3000 hour (whichever comes first) warranty is offered for Eaton Model 7 Hydrostatic transmissions; covers full cost of replacement up to 1000 hours of use, and after 1000 hours warranty coverage is prorated against
3000 hours.
2. WHAT THIS WARRANTY DOES NOT COVER:
A. This warranty does not cover defects caused by depreciation or damage caused by normal wear, accidents, improper maintenance, improper use or abuse of the product, alterations, or failure to follow the instructions contained in the
Operator’s Manual for operation and maintenance.
B. The customer shall pay any charges for making service calls and/or for transporting the mower to and from the place where the inspection and/or warranty work is performed.
3. HOW TO OBTAIN SERVICE UNDER THIS WARRANTY:
Warranty service can be arranged by contacting the dealer where you purchased the mower or by contacting Walker Manufacturing Company, 5925 East Harmony Road, Ft. Collins, CO 80528. Proof of the date of purchase may be required to verify warranty coverage.
4. WARRANTY LIMITATION:
A.
THERE IS NO OTHER EXPRESS WARRANTY. ANY WARRANTY THAT MAY BE IMPLIED FROM THIS PURCHASE
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED TO THE
DURATION OF THIS WARRANTY AND TO THE EXTENT PERMITTED BY LAW ANY AND ALL IMPLIED
WARRANTIES ARE EXCLUDED. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
B.
WALKER WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES AND/OR
EXPENSES IN CONNECTION WITH THE PURCHASE OR USE OF THE MOWER. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation(s) or exclusion(s) may not apply to you.
C. Only the warranty expressed in this limited warranty shall apply and no dealer, distributor, or individual is authorized to amend, modify, or extend this warranty in any way. Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute warranties by Walker, and should not be relied upon.
D. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
45
WALKER MFG. CO.
• 5925 E. HARMONY ROAD, FORT COLLINS, CO 80528 • (970) 221-5614
FORM NO. 100413 PRINTED IN USA www.walkermowers.com ©2014 WALKER MFG. CO
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Tractor Decals
- 6 Body / Chassis Assembly (GHS Models)
- 8 Rear Body Assembly (GHS Models)
- 10 Body Assembly (SD Models)
- 12 (GHS Models)
- 14 (SD Models)
- 16 Engine Group
- 18 Air Intake And Exhaust Group
- 20 Radiator Group
- 22 Hydrostatic Ground Drive Assemblies
- 24 Steering Control Assemblies
- 26 Throttle Control Assembly
- 28 Parking Brake Assembly
- 30 GHS Group
- 32 Assembly (10.0)
- 34 GHS 10.0 Bushel Catcher Assembly
- 36 Instrument Panel Assembly
- 38 Electrical Assembly
- 40 (GHS 10.0 Bushel Components)
- 42 Electrical Connectors
- 44 Lubrication Points
- 46 Wiring Schematic
- 47 Limited Warranty