Signal Vehicle Products SS651MT Specifications

new cover art.qxd:Back cover 1.qxd 6/9/08 8:58 AM Page 1

See these and other great products inside our catalogue

See page 4 for the Popular

Dash Blazer

See page 81

See page 65

Only $179.99

See page 46

Incident Command

See page 50

Radio/Pager Cases

See page 114

Only $59.99

See page 133

Traffic Safety Equipment

See page 126

EVAC Chairs

See page 79

Only $12.99

See page 45

Helmet Accessories

See page 137

Job apparel

See page 124

Only $9.99

Emergency Responder Products LLC

PO Box 353

Old Bethpage, NY 11804

Helmet as low as $189.00

Portable Lighting

608

www.911erp.com

Fax 877-572-7793

“Whose life are you going to save today?”

Law Enforcement

Fire/Rescue

EMS

Public Safety

www.911erp.com

877-572-9592

These items are too new to get into the catalogue. To see the full description, visit our website.

8 Multi Level

Super Bright LEDs

14 Super Bright LEDs

ERP1873

You have to see this mini bar to believe it. The unique design maximizes your light output.

Magnetic mount with a 12 volt accessory plug.

Only $449.00

ERP1852

A New twist on surround lighting. Use it as a single or use 2 on the corners. Magnetic mount with a 12 volt accessory plug.

Only $249.00

ATTENTION: Municipalities.

Do you need to set up an account?

Fax us on your department/organization letterhead.

Please include:

Billing address

Shipping address

Contact person(s)

Phone and Fax

Email and we will get you set up.

Contact us if you need additional information

877-572-9592

877-572-7793 is our Fax or email us at [email protected]

Emergency Responder Products

Low Price Guarantee Policy

We will not be undersold!

Because we offer factory direct products we are able to guarantee the lowest prices available for every product we sell.

And that is 100% Guaranteed.

If you find any item at 911erp.com on any other website for a lower price we will match that price 100% guaranteed.

Terms and Conditions:

You must email us at [email protected] within 15 days of your purchase. The guarantee only applies to the actual price of the items on your order.

Shipping and handling and taxes are not applicable. The item must be the same item number and made by the same manufacturer. Closeout items and going out of business sales do not apply. The item must be in stock and available for immediate delivery from the competitor's site. Refunds will by applied within 7 days after we are contacted.

Emergency Responder Products, reserves the right to deny any price match if it does not fully meet the criteria specified above

.

RETURN POLICY

Our return policy is simple. If you are not satisfied with your purchase for any reason, just contact us by phone or email, get a return authorization number and return your item within

30 days of delivery to you. We will refund your full purchase price of the item. The item can not be damaged or abused in any way in order to receive a full refund. Shipping and handling are not refundable. Items must be returned by a prepaid/insured traceable source, such as, FedEx, UPS or USPS Priority Mail.

PLEASE NOTE* Due to the Hazardous Material, Road Flares are not a returnable item.

Acceptance of Terms

Emergency Responder Products LLC, reserves the right to accept or reject any and all orders, regardless of the manner in which the order is made. Emergency Responder Products reserves the right to update these Terms and Conditions ("TAC") at any time without notice to you. The most current version of the TAC can be reviewed on the "polices" our web pages.

Place of Sale

Orders become valid, and the sale shall be deemed made in Old Bethpage, Nassau County, New York, subject to the terms set forth herein, when accepted by emergency Responder

Products LLC. All sales are subject to the laws of the New York State, and the United States Government and other relevant foreign laws. The venue for all disputes shall be in the courts of New York. No change, modification or revision of your order shall be valid unless agreed to in writing by Emergency Responder Products LLC. Any terms and conditions set forth in the buyer's purchase order shall not materially alter terms and conditions set forth herein.

Restrictions on the Sale of Specific Products

The United States Government restricts the sale of certain products to international destinations in which an export license must be obtained by Emergency Responder Products prior to order processing. Orders for international destinations are subject to review by Emergency Responder Products and will be processed in compliance with all United States

International Trade Regulations. All transactions are subject to screening against all published Denied Parties Listings made available by the United States Government.

Emergency Responder Products restricts the sale of selected products such as, but not limited to, embroidered apparel, badges, nameplates, insignia, emblems, and collar pins that identify the holder or wearer as a member of any law enforcement agency. Orders for such products must be submitted on department letterhead, and with a copy of official identification. Please call our Customer Service Department at 1-877-572-9592 for more details. When you place an order for products that are subject to any legal restrictions, you warrant to us that you are authorized to make such purchase, and you are in compliance with all local, state and federal laws concerning same. As a double check to protect the public, please understand that we may verify employment of any person ordering such items. We apologize for any inconvenience this may cause.

Restriction on Purchase or Possession of Body Armor It is generally against Federal Law for a person convicted of a violent felony to purchase or possess body armor. In addition, various States also have laws restricting the purchase or possession of body armor by persons convicted of certain felonies, other crimes of violence, or drug crimes. By purchasing body armor from Emergency Responder Products, you acknowledge and certify that (i) you have no felony convictions, (ii) you have not been convicted of any other crime that would restrict your ability to purchase or possess body armor under any Federal or State law, (iii) you do not intend to use the body armor for any criminal purpose and (iv) you are over 18 years old.

Emergency Responder Products reserves the right, in its sole discretion, to refuse to sell body armor to any person. Additionally, the sale of body armor to residents of Connecticut is restricted to in-person sales, unless the sale is made to certain law enforcement or military personnel.

Links To Third Party Websites

As a convenience to you, this website contains links to third party websites that are not owned, operated or controlled by Emergency Responder Products. By including these links

Emergency Responder Products is not endorsing or approving such websites. Emergency Responder Products shall not be liable or responsible for any loss or damage resulting from your use of any third party linked website or from any information, products or services made available on any such linked website. Emergency Responder Products makes no representations or warranties, whether express or implied, including, but not limited to, warranties of merchantability, fitness for a particular purpose and non-infringement, regarding any third party linked website or any information, products or services made available through any such linked website. By clicking on a link to another website you will leave this website.

Pricing

Although every effort is made to keep our website and catalogue error-free, occasionally a mistake will occur. In the event of an error, we reserve the right to correct the error.

Have More Questions? Contact Us

How can we help you?

Table of Contents

Vehicle Lighting 4

Here at Emergency Responder Products, we pride ourselves on serving the needs of those who serve. We are constantly searching for the most innovative and new products to help you perform your job. Our knowledgable staff will assist from start to finish to make your purchase a no hassle experience.

Vehicle Equipment 34

Traffic Safety 45

Hydrant Access 51

Books 52

Badges 54

Duty Gear 63

Job Apparel 67

Gloves 70

Safety Apparel 77

Trusting Reputation

Great Selection

No Hassle

Incident Command 81

Tools 84

Equipment 99

Eyewear 133

Helmets & Acces 137

SCBA Access 139

Gear Bags 143

877-572-7793 www.911erp.com

[email protected]

4

Dash Lights

Lights you want

The Mini Phantom LED

Dash Light

ULB9XX

The Mini Phantom gives you more warning power than the original, but in the same low profile design and at the same low price. It is packed with more LEDs than the original Mini-Phantom, three complete rows across its housing, making it 25% brighter!

35 flash patterns, changed via a push button

Three rows of LEDs deliver bright, efficient warning

Extremely low amp draw

Diodes last for 100,000+ hrs -Designed for interior

Now 25% Brighter!

use only .

Comes with suction cup mounts for fast install

Accessory plug included 1"H X 9"L X 1-1/4"D Available in Blue , Red , Amber , Green ,Clear or mix 2 colors

Best Seller

Still Only

$99.99

I

C

L

E

V

E

H

L

I

G

H

T

I

N

G

The Dash Blazer LED

Dash Light

This LED light is a compact but a powerful dash light that has the punch of light you need. The LED light only draws .75

amps of power but gives you the maximum output.. A windshield glare defender is included. 15

Switchable patterns. Button is mounted for easy access. Comes with suction cup mounts for fast install Accessory plug included with On/Off Switch for

Easier Handling.

5.5” W X 1.75” H X 5.5” D with shield.

Available in Blue , Red , Amber , Green ,Clear

Best Seller

Only

$99.99

ERP287

ERP286

The Dash Blazer II LED

Dash Light

This LED dash light has the punch of light you need. The dual LED lights only draw 1.5 amps of power but give you the maximum output.. A windshield glare defender is included. 15 Switchable patterns. Button is mounted for easy access. Comes with suction cup mounts for fast install Accessory plug included with On/Off

Switch for Easier Handling.

8.5” W X 1.75” H X 5.5” D with shield

Available in Blue , Red , Amber , Green , Clear or mix 2 colors

Best Seller

Only

$179.99

The Striker LED

Dash Light

This LED dash light has the power you need. The dual LED lights only draw

1.5 amps of power but give you the maximum output.. A windshield glare defender is included. 15 Switchable patterns Button is mounted for easy access. Comes with suction cup mounts for fast install

Accessory plug included with On/Off Switch for

Easier Handling.

11” W X 2” H X 6” D with shield. This light can also be mounted as a deck light with our dual

Best Seller

Only action mounting bracket

Available in Blue , Red , Amber , Green ,Clear or mix 2 colors

$179.99

ERP288

Order Toll Free 877-572-9592 Always on Line at www.911erp.com

Lights you need

ERP 281

Dash Lights

5

Stinger Deck/Dash LED

Lights

The Stinger gives you the same LED light impact as our other LED lights. Extremely low amp draw .The LED light only draws .75 amps of power but gives you the maximum output.. Comes with suction cup mounts for fast install . Can used as a dash light, windshield mount light or rear deck light or even a rear mounted light for any SUV. 15 Switchable patterns. Button is mounted for easy access.Accessory plug included 2"H X 5"L X 2"D

Available in Blue , Red , Amber , Green , Clear

Only

$89.99

Penetrator LED

Dash/Deck Light

This LED light is bright! Can be windshield mounted with suction cups or can be deck mounted with the dual action mounting bracket. This is also a great light for mounting in the rear windows of any SUV.. 15 Switchable patterns. Button is mounted for easy access. Comes with suction cup mounts for fast install Accessory plug included with On/Off Switch for Easier Handling.

5.5” W X 1.75” H X 5.5” D .

Available in Blue , Red , Amber , Green, Clear

Only

$179.99

ERP 402

ERP819

Behest LED

Dash/Deck Light

This Dual Head LED light is bright! Can be windshield mounted with suction cups or can be deck mounted with the dual action mounting bracket. Comes with suction cup mounts for fast install Accessory

Only plug included with On/Off Switch for

Easier Handling.

10” W X 2.75” H X 5.5” D with shield.


$129.99

Lucent LED

Dash/Deck Light

This Split Head LED light is bright! Can be windshield mounted with suction cups or can be deck mounted with the dual action mounting bracket. Comes with suction cup mounts for fast install Accessory plug included with On/Off Switch for Easier Handling.

5.5” W X 2.75” H X 3.5” D

Only


$99.99

ERP822

V

E

H

I

C

L

E

T

I

N

G

L

I

G

H

ERP1416

Level 3 LED

Dash/Deck Light

This Tri-Level LED light is super bright! Can be windshield mounted with suction cups or can be deck mounted with the dual action mounting bracket. Use to mount on rear deck around the 3rd breaklight too!

Lights can be synchronized. Comes with suction cup mounts for fast install Accessory plug included with On/Off Designed for the least amount of flash back from your windshield or rear window.Available in Blue , Red , Amber , Green, Clear

Only

$259.99


V

E

H

I

C

L

E

T

I

N

G

L

I

G

H

6 Lights you want

M Tech Single Head LED Light

DL35-6

The new Signal M-Tech Single head LED light delivers wide light dispersion.

The light has all the tools to catch drivers' and pedestrians' attention. The M-Tech has far reaching light, wide angle coverage and 35 selectable warning patterns.

Includes a suction cup mount, flashback hood and accessory plug with on/off switch. This light only draws .4 amps.

This light easily fits on your windshield and stays clear when off for a stealth appearance. Remember to specify your color.


Blue, green or clear add $8.75 per color

Starting at

$122.99

M Tech Dual Head LED Light

Extremely wide light distribution Highly efficient optics

Impact resistant housing

Flashback hood

Reverse polarity protection Starting at

Voltage: 12V DC

Light weight: less than 2 lbs.

$228.99

Color Combinations: Amber, Blue, Green,

Red, and White

Ships Complete with mounting hardware and instructions


Blue, Green, Clear add $18.75 per color

DL35-12

LED

Visor Light

VL-22

Auto-Tilt Automatic Activation - automatically switches on when visor is pulled down

- Automatically switches off when visor is lifted up. 30 different selectable flash patterns with the push of a button Vibration resistant LED technology. CIG plug and

Velcro straps standard - allows quick installation.

Long life - 100,000 hours average.

Reverse polarity protection.

High impact resistant polycarbonate housing.

Light weight (10.4 oz.)

Starting at

$169.99

Compact and ultra thin (11.5" L X 4" H X .875" W

Very low current draw (2.0 amps)

Available in Blue , Red , Amber , Green , Clear or mix 2 colors Blue, Green, Clear add $95.75 per color

DVL-21 The STARVISION series strobe lights will give you plenty of possibilities to customize to your individual needs. The STARVISION

DVL21 series strobes are available in Quad Flash or Random flash. Ships complete with hook and loop fasteners. Singlewide strobe with QuadFlash pattern.

Available in Blue , Red , Amber , Green , Clear or mix 2 colors

Only

$129.69

These STARBURST series LED lights are especially designed kits for mirror mounting. they offer the same features as the standard DL15 series LED lights.

This kit includes interior mirror mounting kit, 6 LED array unit, accessory plug with lighted switch and 30 different customer selectable flash patterns.

1 1/2" high X 6" wide X 1 1/8" deep

Draws 0.8amps

Only

$129.00

DL15-MMB


Lights you need

Dash Lights

7

The Shield Visor Strobe Light

ERP28

The Shield is a visor mounted strobe light. It flashes 120 times per minute.

.Accessory plug included

4"H X 11"L X 2"D

Only

DL15

High Intensity,

STAR

Generation-3

LEDs Only 1only

$119.99

1/2" Tall! 6" or 11" Lengths (1-

1/8" Deep)

Rotationally Adjustable

Mounting Options: Suction

Cups, 5" Permanent Mount

Legs (over third brake light), 2.875" Permanent Mount Legs, 1.75"

Permanent Mount Legs, Universal Grille Mounting or Universal

Mirror Mounting (suction cups and all mounting legs (DL15-BKT

Available in Blue , Red , Amber , Green ,

Clear

$149.99

Tear Drop Halogen Dash Light

1166H

This is a 12V DC

Economical teardropshaped rotating light.

This light is very popular with volunteer firefighters and unmarked police units.

It has a gear-driven rotator and ships with an eye shield and mounting plate.

Accessory-plug adapter with cord for roof or dash. Stainless steel clamp ring.

Flash rate: 160 fpm (+/- 10).


Only

$49.99

universal mount kit) are included with each light

Weight: Less that 2 lbs. Amp. Draw: 6" (0.8 Amps); 11" (1.6 Amps)

Approvals: SAE J595, SAE J1318, and California Title 13 for

RED and BLUE


V

Compact Low Profile Dash Light

E

This is a low profile design that fits under

H

I sloping windshields with minimum C obstruction and maximum visibility

L

1169HM

E

Features a wide angle reflector for longer flash duration and brighter

Only impulse Comes with a 60 lb. donut magnet 7.13" Dia. / 3.5 H

Available in Blue , Red , Amber , Green,

Clear

$55.99

Hot Shot II Halogen Dash Light

L

I

G

H

1188HM

Only

$55.99

The Hotshot II is our most compact dash light. A 50 watt halogen bulb combined with a highly polished reflector gives a high intensity flash. Equipped with a 60lb magnet, mounting plate and 12 volt accessory plug and cord with on/off switch.


T

I

N

G

$15.99

274-875

Designed as an attention getting device

Creates a triple impulse with most dash lights Sturdy base: Molded black ABS plastic with 2 mirrors

4.5" / 5.5" polished acrylic mirrors

Magnetic plate at the base to accommodate magnetic mount light

Add superior visibility

For

Hotshot and

VORTEX lights Accommodates magnetic mount lights Adds four additional flashes Built in cover shields the driver's eyes Comes with a Velcro mount

$18.99

274-878

Removable bracket

Silicon suction cups tabs for removal 11" L (adjustable plate) / 4"

W Weight: 4 lbs.

with unlocking

$12.99

274-874


08 LED Dash Deck & Window Lights

High Intensity, STAR Generation-3 LEDs Only 1-1/2" Tall! 11" in Length (1-1/8"

Deep) Rotationally Adjustable

Mounting Options: Suction Cups, 5" Permanent Mount Legs (over third brake light), 2.875" Permanent Mount Legs, 1.75" Permanent Mount Legs, Universal

Grille Mounting or Universal Mirror Mounting (suction cups and all mounting legs

(DL15-BKT universal mount kit) are included with each light

Weight: Less that 2 lbs. Amp. Draw: 6" (0.8 Amps); 11" (1.6 Amps)

Approvals: SAE J595, SAE J1318, and California Title 13 for RED only

$224.99

and BLUE

Available in Blue , Red , Amber , Clear

LEDs you want

DL15-12

V

E

H

I

C

L

E

DL15-6GMB This is a 12V DC Exterior/Interior Mount Kit; Grille Mount Bracket, 6 LED Array

Unit, Weatherproof Connector, 12' Conductor Cable; power, ground, and pattern select (30 customer selectable patterns)


Only

$182.49

L

I

G

H

T

I

N

G

3rd Brakelight Cover LED Light

DL35CV

Starting at

$256.99

Extremely wide light distribution with highly efficient optics.

It has an impact resistant housing. No drill mounting required for quick and easy installation. Flashback protection hood. Selectable Day/Night mode with a 15’ Wire harness. Flash pattern select wire with 35 Customer selectable flash patterns

Dimensions: 3” H X 21” W X 7” D

Voltage: 10V-16V DC Weighs less than 3 lbs.

Amp draw: 0.8 Amps Single color for each M-Tech™ LED head

Available in Blue , Red , Amber , Green , Clear or mix 2 colors Blue, Green, Clear add $17.75 per color

DL25HLSW

Model DL-25LS Standard or Model DL-25HLSW (Weather Resistant)

Selectable flash patterns with the push of a button. Available in weather resistant housing for exterior applications. Micro-controlled solid state flasher. Vibration resistant LED technology. Accessory plug and

Only mounting feet standard - allows quick and easy installation.

Long life - 100,000 hours average. High impact resistant aluminum

$119.69

housing. Very low current draw (2.0 amps) Dimensions: 6" L X 3" H X 1.625" W

Available in Blue , Red , Amber Add $79.50 for Blue option exterior option add $91.00

Weighs less than 1 lbs. Rugged extruded housing. Mounting bracket, hardware, and mounting instructions included Interior / Exterior Mount LED

Light with Self-contained Internal Flasher Standard Intensity Weather

Resistant 15 Different Selectable Flash Patterns Amp Draw:.05 Amps

Dimensions: 1 1/2" H X 3" W X 1 5/8" D


Only

$69.99

each

ERP289B



Deck & Grille Lights

LED Deck Kit Weatherproof

the Exterior or interior Mount Synchronized Kit includes one Pair of

6 LED Array Units (two DL15-6W-1 units can be synchronized for simultaneous or alternate flashing), Weatherproof

Connector, 12' Three Conductor Cables; power, ground, and synchronize (3 customer selectable patterns)


Blue, green, clear add $15.99 per light

DL15W-1KXX

9

Starting at

$398.49

LED Mini Light Grille or Deck Kit

Micro-controlled solid state flasher. Rated for over 100,000 hours of use.

Low amp draw (less than 0.8 amps). Protects against moisture, contaminates & voltage spikes.

High, impact resistant glass lenses. Vibration resistant with LED technology.

Ideal for construction vehicles, utility vehicles, DOT and municipal vehicles.

Two selectable warning flash patterns: Alternating and Random

Voltage: 12V DC.

Kit Weight: 3 lbs. Dimensions: (Mini) 2.5" L X 5" W X 2.75" H

Kits include: (1) Set of 2 LED heads with mounting brackets: (one master

Starting at

$161.99

LED Large Light Grille or Deck Kit

LDK395

Micro-controlled solid state flasher.

Rated for over 100,000 hours of use.

Low amp draw (less than 0.8

amps). Protects against moisture,

Starting at contaminates & voltage spikes.

High, impact resistant glass lenses.

$421.69

Vibration resistant with LED technology. Ideal for construction vehicles, utility vehicles, DOT and municipal vehicles. Two selectable warning flash patterns: Alternating and Random Voltage: 12V

LDK396

DC. Kit Weight: 3 lbs. Dimensions: (Large) 2.5" L X 6.55"

W X 3.5" H Kits include: (1) Set of 2 LED heads with mounting brackets: (one master unit and one slave unit) (1) SP3860-

LDF switch panel and instructions. Available in Blue , Red , Amber , Clear Blue and Clear add $32.89 per light

Model LDH396

Square LED Grill/Deck Lights Strobe Grill/Deck Lights

H

T

I

N

G

L

I

G

V

E

H

I

C

L

E

ERP17

High Intensity, LEDs 4” X 4” 20 array LED Grill or Deck

Lights.

Weight: Less that 2 lbs. Amp. Draw: 6" (0.8

Amps); only

Selectable flash patterns. Bright LED power with out the amp draw.

$159.99

Only 3” deep


ERP27

These self contained strobe lights are 6” wide only 3” deep.

They can be mounted in your vehicle grille or on rear deck

Available in Blue , Red , Amber , Green, Clear only

$169.99


ERP282

10

Deck & Grille Lights Super Bright!

Sun Ray LED Deck Light

This interior mount light includes two of 8 LED Array Units

Dimensions: 9” wide X 2” high X 2.5” high

Includes Accessory plug with on/off switch

Includes 2 mounting options: suction cups and deck mount brackets


Only

$169.99

V

E

H

I

C

L

E

Sun Ray Double LED Deck Light

This interior mount light includes four of 6 LED Array

Units

Dimensions: 18” wide X 2” high X 2.5” high




ERP632

Only

$229.99

Sun Ray LED Large Light Grille or Deck Kit

This interior mount light includes four of 6 LED Array Units

Dimensions: 27” wide X 2” high

X 2.5” high




ERP633

Starting at

$359.69

L

I

G

H

T

I

N

G

Two single 6 array High Intensity, LEDs 5” wide X 3.5” deep X

2” high

Weight: Less that 2 lbs. Amp. Draw: 6" (0.8 Amps);

15 Selectable flash patterns. Bright LED power with out the amp draw.

Available in Blue , Red , Amber , Green,

Clear only

$129.99

ERP630

These self contained strobe lights are 4. 75” wide only 23” deep. They can be mounted in your vehicle grille or on rear deck .Available in Blue , Red , Amber , Green, Clear

These self contained strobe lights are 7” wide only 2” deep. They can be mounted in your vehicle grille or on rear deck

ERP164 only

$99.99

only

$129.99

ERP166



11

Complete & economical choice choice for a 4-corner remote strobe system

Select flash patterns of Single, Double, Triple, Quad, Five or

Random

Customer selectable Day/Night mode

Features power reduction to operating heads in case of head failure

Only

$179.99

Ships complete with power & control leads and instructions

Display packaging is available: RSK244P-1

Standard kit includes one 75 Watt remote power supply (RP242), 4 clear strobe tube assemblies (ST415PC), 2- 15' Cables with attached connectors (4415), 2- 20' Cables with attached connectors, 1- Lighted toggle switch (LT1511)

Available in Blue , Red , Amber , Clear

Incorporates six outlets with 24 customer selectable flash patterns all in a 90 watt system Multiple strobe head combinations can be enabled

Customer selectable Day/Night mode

Only

$219.99

Features power reduction to operating heads in case of head failure, RFI protection, cooling fan and

Visual System Diagnostics (VSD). Ships complete with power & control leads and instructions

4-head and 6-head kits are available. Display packaging is available: 6-head

(RSK996P-1), 4-head (RSK996P-4-1)

RSK996P standard kit includes one 90 Watt remote power supply (RP996), six clear strobe tube assemblies (ST415PC), six 15' cables with attached connectors (4415), one lighted toggle switch (LT1511)

RSK966P-4 standard kit includes one 90 Watt remote power supply (RP996), four clear strobe tube assemblies (ST415PC), two 15' cables with attached connectors (4415), two 20' cables with attached connectors (4420), one lighted toggle switch (LT1511)

Available in Blue , Red , Amber

4 Head Hide-A-Way LED Light Kit

LED technology now in a hide-a-way. This is the kit you have been waiting for.

Available in Blue , Red, and Clear. Kit is complete with power supply, wire, 4 super bright LED heads, and switch

Only

$349.99

I

C

L

E

V

E

H

L

I

G

H

T

I

N

G

This complete 75 watt s 4 head strobe kit is just what you need. It is complete with (4) strobe bulbs, four sets of wires, 80 watt power supply with LED indicators and

Select flash patterns of Single, Double, Triple, Quad, Five or Random. Switch patterns on the fly!. Strobes are also available in Red, Blue.

.

Complete

Kit for

$159.99


12

Grille or Deck Kits Choose Your Kit

Don’t let the small size of the strobe heads fool you. They are optically tuned to produce brilliant flashes. The housing is made of impact resistant plastic to prevent corrosion. The colored glass lenses will not melt or peel. 6 selectable flash patterns. Ships complete with power & control leads, switch and instructions. Available in Blue , Red , Amber , Clear

Only

$239.00

C

L

E

Our standard size OPTIMAX grille & deck strobes give you high intensity flashes with a variety of options. The housing is made of impact resistant plastic to prevent corrosion.

Only

$255.00

The colored glass lenses will not melt or peel. 6 selectable flash patterns. Ships

V complete with power & control leads, switch and instructions. Available in Blue , Red , Amber , Clear

E

H

I

If you are looking for Round Par-36 grille and deck strobes, these are the answer. The housing is made of rubber for rough usages and to prevent corrosion. The bulbs are covered by replaceable polycarbonate filters.

Only

$255.00

6 selectable flash patterns. ships complete with power and control leads, lighted switch and cables.


L

I

G

H

T

I

N

G

When you have limited mounting space but don’t want to sacrifice visibility, these Halogen heads are the perfect solution. The housing is made of impact resistant plastic to prevent corrosion. The colored glass lenses will not melt or peel. Ships

Only

$115.99

complete with alternating flasher box with lighted rocker switch and instructions. Available in Blue , Red , Amber , Clear

These lights are designed for grille or deck mounting. The

Halogen heads flash alternately. The housing is made of impact resistant plastic to prevent corrosion. The colored glass lenses will not melt or peel. Ships complete with alternating flasher box with lighted rocker switch and instructions. Available in Blue , Red , Amber , Clear

Only

$115.99

If you are looking for Round Par-36 grille and deck lights, these are the answer. The housing is made of rubber for rough usages and to prevent corrosion. The bulbs are covered by replaceable polycarbonate filters. The RHK940 has the flasher built into one of the heads and does not come with a switch box. The Only

RHK960 includes a switch box with a lighted toggle switch.


$115.99


LED lights you want

ERP289

Auxiliary Lights

Deck or Grille LED Kit

Don’t let the small size of the strobe heads fool you. They are optically tuned to produce brilliant flashes. The housing is made of impact resistant plastic to prevent corrosion. The colored glass lenses will not melt or peel. 6 selectable flash patterns.

Ships complete with power & control leads, switch and instructions. Available in Blue , Red , Amber , Clear

13

Only

$239.00

Sun Ray LED Mirror Beams

Only

$199.00

LED Mirror Beams put added unobstructed warning light where you need it: forward and at critical intersection angles.

ERP622

4” Self Contained LED Light Kit

Available in Blue , Red , Amber ,

Green , Clear

LDHEF3K

These lights are made with "Potted", solid state components. They are rated for over 100,000 hours of use and draw less than 0.8 amps. High, impact resistant

Par 36 rubber housing. Protected against shock and vibration.

Ideal for law enforcement vehicles. Great for Trunk mounts.

Meets SAE J1318 and J845 Flash rate: 72/min. (Quint)

Dimensions: 4.75" diameter X 2.5" length

Starting at

$155.99

Kits include: (2) LDHEF-3 LED heads with mounting brackets and instructions.

Available in Blue , Red , Amber , Clear Blue and Clear add $43.49 each light LDHEF-3K-XX

Self Contained 4” Round or Oval LED Lights

Random or alternating selectable flash sequence.

"Potted", solid state components. Rated

Starting at for over 100,000 hours of use. Low

$71.99

amp draw (Less that

0.8 amps). Protects against moisture, contaminates & voltage spikes. High, impact resistant, polycarbonate housing. Protected against shock and vibration.

Ideal for construction vehicles, utility vehicles, DOT and municipal vehicles. Meets SAE J1318 and J845.

Flash Rate: 72/min. (Quint) Voltage: 12/24V DC. Non-Flashing LED Heads are available: Part # LDH394.

4" Round: 4.3" X 1.75" Available in Blue , Red , Amber , Clear Add $47.99 for Blue or Clear.

LDHEF4

I

C

L

E

V

E

H

L

I

G

H

T

I

N

G

The STARBURST DLX3 series LED auxiliary light is a small and powerful weather resistant package perfect for mounting on motorcycle saddlebags, in trunks, on vehicle

Only

$59.95

fenders, mirrors, or any place a small intense LED light is needed. Using STAR generation-3 LEDs it has current limit protection over the entire operating voltage and reverse polarity protection gives you worry free operation. The STARBURST DLX3 is offered in a variety of colors and they can be synchronized with other STARBURST DLX3s. High/Low power select and 11 different customer selectable flash patterns are available, including a Steady On, for many customized possibilities. Ships complete with five 3' attached wires, gasket, and instructions. 1-7/16" High x 4" Wide x 1-7/8" Deep Weight: Less than 1 lbs. Amp Draw: 0.4

Amps Voltage: 10-16 Volts See page XX for mounting options Available in Blue , Red , Amber , Clear


14 Mini Light Bars Mini-bars you want

9200H

9200HM

Choose from 3 different mounting options:

Permanent

Magnetic

Super Vacuum Magnetic

Choose from 3 different Light options:

Standard Bulb

Halogen

Strobe

Star attention getting power and reliability

Two internal "V" mirrors to enhance flashes

Compact package

Durable polycarbonate lens

Dependable safety addition to your vehicle

Quiet operation

V

E

H

I

C

L

E

9200S

Choose from 2 different power options:

Direct wire

Accessory plug with On/Off Switch

Choose from 4 different color options:

Blue , Red , Amber , Clear

Clear lens remember to choose your filter color

Starting at

$97.99

Halogen

$112.99

Halogen

$207.49

L

I

G

H

T

I

N

G

Strobe

$184.99

Strobe

$262.99

The STARBEAM 9216 & 9224 Series mini-bars are a heavy duty, all in one package with the reliability and attention getting power you need. Choose from high intensity strobes or patented shock mounted rotators with two sealed roller bearings providing quiet, smooth, and maintenance free operation. The circuits and the strobe tube assemblies in the strobe models are fully encapsulated to guard against shock and vibration while the rotator models offer lock and stay bulbs that are field replaceable. Wall mirrors are standard for both models. Durable polycarbonate domes resist UV deterioration and are fully gasketed to protect against the elements. The rugged aluminum extruded base will not bend or warp. The STAR-

BEAM 9216 & 9224 Series are available in permanent, T-Slot mounting only. Ships complete with 15' lead, mounting hardware and instructions.

Choose from 4 different color options: Blue , Red , Amber , Clear Clear lens remember to choose your filter color

Full 360° light output Durable polycarbonate, injected molded domes are fully gasketed to protect against moisture

Potted circuitry protects against shock and vibration

Rugged one-piece, extruded, anodized aluminum base

24 Customer selectable flash patterns via external pattern select wire High/Low power select

20” wire leads

Available in Blue , Red , Amber Leds or

Starting at

Blue , Red , Amber , Clear Lens

Choose from Magnetic mount with 12volt accessory plug or permanent mount 20 foot wire lead.

$390.99


Big Selection Mini Light Bars 15

All Star mini-bars are built tough. Our heavy-duty aluminum extruded base will not bend, warp or sag. It's pressure-sealed to the strong, impact-resistant polycarbonate lenses, providing you with one of the most durable aerodynamic shells in the industry to protect components. The modular lens design makes any model easy to repair and a snap to re-seal.


Mounting Options

Magnetic (20” Only)

Permanent

Power Options

Accessory Plug with On/Off Switch

Direct Wire

Starting at

$155.99

Lighting Options

2- 360 degree Strobes

2- Halogen rotators with “V” mirror

3 Halogen rotators with 2 “V” mirrors

Lens Color Options

Blue

Red

Amber

Green

Clear (choose filter color)

This light may be small, but it is extremely bright. This has 360 degrees of LED lights. Made from strong, impact-resistant polycarbonate lenses, providing you with a durable aerodynamic shell. Equipped with 12 volt accessory plug with On/Off switch and strong magnets for roof top mounting. Only

ERP302 Available in Blue , Red , Amber , Green , Clear

$299.00

V

E

H

I

C

L

E

This light may be small, but it is extremely bright. This has five rows of LED lights. Giving you 360 degrees of Super Brite LED lights

Made from strong, impact-resistant polycarbonate lenses, providing you with a durable aerodynamic shell. Equipped with 12 volt accessory plug with On/Off switch and strong Only magnets for roof top mounting.


$299.00

or combine colors

ERP302

This has five rows of LED lights. Giving you 360 degrees of Super Brite

LED lights Made from strong, impact-resistant polycarbonate lenses, providing you with a durable aerodynamic shell. Equipped with 12 volt accessory plug with On/Off switch and strong mag-

Only nets for roof top mounting. You can choose from 15 random or alternating flash patterns.

$399.00

Controller included.

Available in Blue , Red , Amber , Green , Clear or combine colors

ERP420

T

I

N

G

L

I

G

H

This has 14 LED module lights with 9 LEds per module. Giving you response light you need. the angular design gives you maximum coverage especially;y at intersections. Made with a strong and long lasting aluminum body. Equipped with 12 volt accessory plug with On/Off switch and strong magnets for roof top mounting. You can choose from 15 random or alternating flash patterns. Controller included.


Only

$579.00

ERP58


16 Mini Light Bars Check our minis!

An economical mini-bars that is built tough.

Our impact-resistant polycarbonate lenses, gives you with a durable aerodynamic design mini light bar.. The modular lens design makes any model easy to repair and a snap to re-seal. ERP0636


2- Strobes with diamond mirror

2- Halogen rotators with mirror

Mounting Options

Magnetic

Permanent

Starting at

$109.99

Power Options

ERP0672

Accessory Plug with On/Off

Switch

Direct Wire


Blue

Red

Amber

Green

Clear

L

I

G

H

T

I

N

G

I

C

L

E

V

E

H

This has 8 strobe module lights with and 2 alley lights Giving you the response light you need. The angular design gives you maximum coverage especially;y at intersections. Made with a strong and long lasting aluminum body. Equipped with 12 volt accessory plug with

On/Off switch and strong magnets for roof top mounting. You can choose from 15 random or alternating flash patterns. Controller included.


Only

$399.00

ERP58

ERP450

This has five rows of LED lights. Giving you 360 degrees of

Super Brite LED lights Made from strong, impact-resistant polycarbonate lenses, providing you with a durable aerodynamic shell and an aluminum alloy base.

Only

Equipped with 12 volt accessory plug with

On/Off switch and strong magnets for roof top $399.00

mounting. You can choose from 15 random or alternating flash patterns.

Controller included.


28” Mini SLEEKER - LED

Optional Alley Lights are available

ERP70

This has 16 LED module lights with Sunburst

LEDs. this is one of the most popular response lights we sell. The angular design gives you maximum coverage especially;y at intersections. Made with a strong and long lasting aluminum body. Equipped with 12 volt accessory plug with

On/Off switch and response duty magnets magnets for roof top mounting. You can choose from 15 random or alternating flash patterns. Controller included.


Only

$499.00


Lights you want Light Bars 17

Only

2 3/4”

Tall


Linear Strobe heads

M-Tech LED heads

Size Options

36” in length

46” in length

56” in length

Dual Level Output



Blue

Red

Amber

Green

Clear

Other Options

Alley Lights

Take Downs

Rear flashers

The Razor light bar is a wider design for better light distribution

The ULTRA LOW PROFILE is only 2 3/4" high!

Strobe, Halogen, and LED options are available

Super bright combinations of "Starburst" high intensity linear LED heads and standard intensity linear LED heads

Starting at

$798.00

Halogen Takedown / Pursuit lights

Halogen Alley lights

Available with 4.5" or 7" linear strobe heads

Available with halogen intersection clearing lights

The Sabre light bar is a wider design for better light distribution

Wider design for better light distribution - allowing improved intersection-clearing rotator angles

Starting at

$502.00

and more options SUPER LOW PROFILE

The only full output, dual level lightbar less than 4"tall

Adjustable lower level lights allow optimal positioning of light output

Available in Halogen, Strobe, or LED options

Patented Shock-mounted rotator system for long-lasting, quiet, rotator operation

Dual ball-bearing rotator spindle for smooth, quiet, rotator operation

Custom lightbar configurations are available


Linear Strobe heads

M-Tech LED heads

Size Options

36” in length

46” in length

56” in length

66” in length

Only

4”

Tall


Blue

Red

Amber

Green

Clear

Other Options

Alley Lights

Take Downs

Rear flashers

Traffic Directors

Only

5”

Tall

L

I

G

H

T

I

N

G

I

C

L

E

V

E

H


Blue

Red

Amber

Green

Clear

(Choose

Filter

Size Options

36” in length

46” in length

56” in length

66” in length


High Speed Rotators

Linear Strobe heads

M-Tech LED heads

Other Options

Alley Lights

Take Downs

Rear Flashers

Traffic Directors

Tow Package

The Interceptor has wider design (better light distribution, intersection, clearing angles and more options)

Sloped end domes for better vehicle contour

Starting at image

Adjustable lower level lights allow optimal positioning

$403.69

of light output

Patented Shock-mounted rotator system for long-lasting, quiet, rotator operation


Low profile - Under 5" high!


18

Light Bars Quality you need

Polished Center

Available

L

I

G

H

T

I

N

G


Halogen Rotators

Linear Strobe Heads

V

E

H

I

C

L

E

Size Options

40” in length

44” in length

48” in length

52” in length

56” in length

64” in length



Blue

Red

Amber

Green

Clear

Pick filter color

Other Options

Alley Lights

Take Downs

Rear Flashers

Tow Packages

All Star light bars are built tough. The heavy-duty aluminum extruded base will not bend, warp or sag.

It's pressure-sealed to the strong, impact-resistant polycarbonate lenses, providing you with one of the

Starting at

$365.99

most durable aerodynamic shells in the industry to protect components. The modular lens design makes any model easy to repair and a snap to re-seal. The lens colors come in amber, red, blue, clear and green.

Have us CUSTOM MAKE light bars to your specifications

Starting at

$399.00

The Enforcer is an economical approach to your lightbar needs.

Choose from many lighting options, advanced gear driving rotators, strobes, LEDs. Take downs, alley lights, front and rear flashers are included on this bar. Custom lightbar configurations are available

This light bar gives dual level coverage. The wider design gives maximum light output. Don’t let the price of this unit fool you on the quality of the product.


Halogen Rotators with Tungsten

Xenon Strobe Heads

LED Heads


Blue

Red

Clear

Amber

Size Options

48” in length

63” in length


Blue

Red

Amber

Green

Clear

(Choose

Filter

Size Options

36” in length

48” in length

58” in length


High Speed Rotators

360 degree Strobe heads

Other Options

Take Downs

Tow Package

Starting at

$273.99

The Starbar is an economical choice for your lightbar needs.

Patented Shock-mounted rotator system for long-lasting, quiet, rotator operation.


360 degree remote strobe heads make a great choice for your strobe option.



LED Bars you want Light Bars

The SLEEKER Light Bars

19

Only

1 3/4”

Tall


All LED

Size Options

48” in length

55” in length


Blue

Red

Amber

Green

Clear

Other Options

Alley Lights

Take Downs

Rear Directional Lights

The SLEEKER is an ULTRA LOW PROFILE lightbar measuring only 1 3/4" high! The unique shape gives you the ultimate in intersection safety.

The Generation 3 LEDs are extremely powerful.

Add Pursuit/Take Down lights

Halogen or LED Alley lights

Starting at

$899.00

Choose

Your Colors

The Piercer is a great strobe bar giving you maximum light output.

The tapered design for is better for light distribution - allowing improved intersection-clearing angles and more options .

Available with alley lights and take down/pursuit lights. The alloy aluminum body makes this light bar tough and durable.

Starting at

$502.00


Choose

Your Colors


Xenon Strobe heads

Size Options

47” in length

Only

4 3/4”

Tall


Blue

Red

Amber

Green

Clear

Other Options

Alley Lights

Take Downs

Directional Board

Only

4 3/4”

Tall

L

I

G

H

T

I

N

G

V

E

H

I

C

L

E


Blue

Red

Amber

Green

Clear

Size Options

47” in length


14 LED heads

Other Options

Alley Lights

Take Downs

Rear Flashers

Traffic Directors

The Piercer is a great LED light bar giving you maximum light output. The tapered design for is better Starting at for light distribution - allowing improved intersection-clearing angles and more options .

$999.00




20 Light Bars Quality you need

L

I

G

H

T

I

N

G

V

E

H

I

C

L

E

Color Options

Blue

Red

Amber

Green

Clear

Pick filter color

Other Options

Alley Lights

Take Downs

Rear Flashers

Front Flashers

Get The Word Out

The Responder is a , multi angle LED light bar that ready for the job.

Intersection lights, 24 Super Bright LED modules, unique design make this light bar a great unit.

It's pressure-sealed and has impact-resistant polycarbonate lenses,

Starting at

$1199.99

providing you with one of the most durable aerodynamic shells in the industry to protect components. The design makes any model easy to repair and a snap to re-seal. The colors come in amber, red, blue, clear and green. Have us CUSTOM MAKE light bars to your specifications

Only

$1800.00

This LED message light bar alerts motorists your message. Type in

Accident Ahead, Lane Closed, Move Right, Move Left or whatever your message needs to be, this bar with its hi output LEDs. the message board can have up to a 10 letter word static and can scroll whatever message you need. Can also be used as a traffic director with arrow functions.

Available in Blue Red Amber Green Clear or choice a combination of colors.

Size Options

48” in length

Starting at

$1099.00

Color Options

Blue

Red

Green

Clear

Amber

Size Options

48” in length


22 Generation 3

LED light switch 9

LEDs array per Pod.

Other Options

Take Downs

Alley Lights

Traffic Director

The Commander is a highly visible LED light bar that is uniquely designed for maximum light output. The shape gives great intersection clearance power. Choose your color or mis your colors up. Add an optional traffic director in the rear or add take down/pursuit lights in the front. Add Alley Lights for a complete response package. The aluminum alloy structure makes this light bar sturdy, tough and ready to work. Switch box is included with this light bar.



Light Bars You Need!

Light Bars

The BriteLight Light Bars

21

Only

1 3/4”

Tall


All LED

Size Options

43” in length

Choose

Your Colors


Blue

Red

Amber

Green

Clear

Other Options

The BriteLight is an ULTRA LOW PROFILE lightbar measuring only 1 3/4" high! The This light bar gives you a stealth appearance when off , but extremely BriteLight when it is on. 15 Flash patterns.

Switch box included.

The Generation 3 LEDs are extremely powerful.

Add Pursuit/Take Down lights

Starting at

$999.00

LED Alley lights

Alley Lights

Take Downs

Rear Directional Lights

The “V” Force Light Bar

V

E

Starting at

$1099

H

I

C

L

Lighting Options Lens Color Options

The V-Force light bar gives you maximum light output. This uniquely designed bar can have up to Xenon Strobes, LEDs or

Rotators.


LED Modules

Xenon Strobe heads

Rotators

Blue

Red

Amber

Green

Clear

E

L

Other Options

Switch box included


Size Options

48” in length

Alley Lights

Take Downs

I

G

H

T

I

N

G


Blue

Red

Amber

Green

Clear

Size Options

48” in length


12 strobe heads

4 high speed rotators

Other Options

Alley Lights

The Jake is a great basic light bar . Available as a strobe bar or with Halogen rotators. Simply and cost effective. The lenses are make from a tough poly-carbonate for maximum use. The aluminum base makes this light bar tough and durable.

Starting at

$399.00



22 Phantom Light Bars Quality you need

L

I

G

H

T

I

N

G

V

E

H

I

C

L

E

Starting at

$1171.99

LED Color Options

Blue

Red

Amber

Green

Clear

Other Options

Cooling Fans

Take Downs

Integrated temperature circuitry

Perfect for undercover or unmarked vehicle applications

Low profile, front windshield mount

Quick install using only three wire connections; no drilling required! Eight M-Tech™ LED heads

(48 total high output LEDs) Built-in switch panel (lightbar can also be hardwired to vehicle’s existing switches) Reverse polarity protection

Selectable Day/Night mode Four output LED flasher with independent flash pattern control

(each output allows 35 customer selectable flash patterns)

Standard 15’ wire harness ULB44-DHP additionally offers: Cooling fans, Integrated temperature sensing circuitry, Two adjustable 35 watt halogen Takedown/Pursuit lights that are easily replaceable without removing the lightbar Dimensions: 2” H X 46” W X 7-1/4” D

Voltage:10V-16V DC Weight: 7 lbs. Single color for each M-Tech™ LED head

M-Tech™ LED head colors: Blue Red Amber Green Clear

Starting at

Undercover Ops

$546.99

Perfect for undercover or unmarked vehicle applications. Low profile - less than 1" high (15/16").

Dimensions: 42" long X 4 3/4" wide. Light Weight: 2.6 pounds.

12V DC cig. plug power (Model# ULB42). Rear window mount version available (Model# ULB42-1)

Installs in 15-20 minutes. Universal visor clip mount. Mounts under center visor clips above rear view mirror.

Blue, White or Green add $117.49

each color

270 long-life LED's. Angled LED's for intersection clearing. Red "night vision" preserving map light.

35 flash patterns via a push button switch. For interior applications only.

Custom lighting color combinations Available in Blue Red Amber Green Clear or choice a combination of colors.

Same lightbar as

ULB42 except one less row of LED lights. All colors

Only

$468.75

Starting at

$499.99

For interior applications only Perfect for undercover or unmarked vehicle applications with overhead center consoles

Straddles overhead center console Front windshield mount

The STAR Split-Phantom® is also adaptable for universal mounting

No drilling required with vehicle specific visor brackets!

Installs in 10-15 minutes Low profile – Less than 1” high

12’ Cigarette plug adapter 216 long-life LEDs (standard model), 176 long-life LEDs (“Value” model)

Angled LEDs for intersection clearing 35 Customer selectable flash patterns via push button switch

Dimensions: 15/16” H X 34” minimum – 42” maximum W X 6” D Voltage: 12V DC Weight: 3 lbs.

Blue, White or Green add $117.49

each color

Amp draw: Standard model: 4.3 Amps max, “Value” model: 3.5 Amps max

Custom color combinations Available in Blue Red Amber Green Clear or choice a combination of colors.


Strobes you want Strobe Lights 23

This durable multi-flash strobe light is

5” high and 4

Only

$89.99

1/2” wide. It is

12 volt and can be direct wire or accessory plug. puts our 35 watts

ERP18

Available in Red , Ambe r , Blue , Clear, Green Red / Blue or

Red /Clear. Equipped with 4 heavy duty magnets

This durable multi-flash strobe light is 5

1/2” high and 3

Only

$89.99

3/42” wide. It is

12 volt and can be direct wire or accessory plug. puts our 35 watts

ERP8

Available in Red , Ambe r , Blue , Clear, Green Red / Blue or

Red /Clear. Equipped with 4 heavy duty magnets

ERP8A

This durable multiflash strobe light is

4” high and 6 3/4” wide. It is 12 volt and can be direct wire or accessory plug. puts our

35 watts

Only

Available in Red , Ambe r , Blue , Clear, Green

Equipped with 4 heavy duty magnets

$89.99

201Z

This strobe light is available magnet mount and also a quad flash model.

Magnet mount includes starting at an eye shield.

Small and dynamic. this

$39.75

light has a quick-snap lens/base assembly (plastic base).

Polycarbonate fresnel lens easy-on and easy-off for speedy field repairs.

Sealed O-ring for enhanced water resistance. Powerful (3-

Joules) strobe, Quadflash (3.75 joules).

Available in Red , Ambe r , Blue , Clear, Green, Magenta

Magnetic mount with Accessory plug add $8.25

242CL

The 242CL gives you a lot of versatility in an exterior mount strobe. The fully starting at encapsulated circuit board gives you the

$97.49

same protection against vibration and other harmful elements as our other reliable strobes.

It has a patented LED diagnostics, photocell for automatic "night" mode, and field selectable Quad and Random flash are standard features. Available in permanent/pipe mount, flange mount or magnetic mount.



This strobe is compact, yet powerful.

Available with Universal /

Flange or Magnetic starting at

Mount.

Only 3 1/4" Tall.

$72.50



Quad Flash add $3.25

241S

200S

The 200S gives you most versatility in a strobe. Choose from single, double or quadflash Brilliant flash

Easy maintenance starting at

$82.49

Medium profile (6 1/4" high)

Life-long flash tube

RFI protection is available for double or quad flash.

Available sealed power supply

Fully gasketed to be weather resistant


Double flash add $8.00

Molded rubber base to absorb shock and starting at

$58.25

prevent corrosion.

3 joules.

211RM: Low Profile,

Singleflash with Magnetic

Mount Low Profile Quadflash available on 211RQ (quadflash) & 211RMQ (quadflash with magnetic mount)



Quad Flash add $3.00

211R


L

I

G

H

T

I

N

G

V

E

H

I

C

L

E

24 Traffic Directors A Variety of Directors

Only

$199.99

This incandescent traffic director has 8 powerful lights. Choose your direction or choose all flash.

The unit is 33” long X 2 1/2” high X 3 3/4” deep.

Traffic Director ships complete with mounting brackets and control box. ERPD02

Only

$329.95

V

E

H

I

C

L

E

L

I

G

H

T

I

N

G

Designed to give you mobile on-site traffic-directing capabilities. Use it on location for road construction, accident or roadside repairs to steer traffic away from dangerous situations and roadway hazards. Gives four distinctive patterns with the turn of a dial (left arrow, right arrow, center-out, and alternating warning pattern). 14lbs., 2-7 amps at 12 volts DC.

TD77

Only

$325.95

LED

Interior Traffic Directors

This super bright LED interior traffic director is 33” wide X 1 3/4” high X 2 1/2” deep not including hood. Mounting hardware included. Also includes switch box for direction mode. Consists of 6 LED units. Can also be used as a response light. Accessory plug included. Ships complete with control unit, attached wire harness, mounting brackets, hardware and instructions.

ERPD006

Only

$375.95

This super bright LED interior traffic director is 42” wide X 1 3/4” high X 2 1/2” deep not including hood. Mounting hardware included. Also includes switch box for direction mode. Consists of 8 LED units. Can also be used as a response light. Accessory plug included Ships complete with control unit, attached wire harness, mounting brackets, hardware and instructions.

ERPD008

Only

$703.95

LED traffic director is perfect for undercover or unmarked vehicle applications. Made from durable poly-carbonate plastic, these traffic directors will not warp or bend. Low profile - less than 1" high (15/16"). Dimensions: 42" long X 4 3/4" wide.

Light Weight: 2.6 pounds. 12V DC cig. plug power Custom lighting color combinations available: blue, red, clear, green, amber. Ships complete with control unit, attached wire harness, mounting brackets, hardware and instructions.

Blue, Green or White options are available, add $117.49 for each additional color

ULB42TD



Traffic Directors

LED

Interior/Exterior Traffic Directors

25

Only

$399.99

This Hi Intensity LEDinterior or exterior traffic director has 8 powerful LED lights. Choose all amber or chage the ends lights to a color of your choice. Switch box, wire and mounting hardware and instruction

Only

$399.95

This Hi Intensity LEDinterior or exterior traffic director has 6 SunRay LED lights in a tough aluminum housing.

Switch box, wire and mounting hardware and instruction included.your The unit is 33” long X 1 3/4” high X 3 3/4” deep.

V

ERPTD406

E

Only

$599.95

H

I

This super bright LED interior traffic director is483” wide X 1 3/4” high X 2 1/2” deep not including hood. Mounting hardware included. Also includes switch box for direction mode. Consists of 8 Sunray LED units. Can also be used as a response light. Accessory plug included. Ships complete with control unit, attached wire harness, mounting brackets, hardware and instructions. ERPTD08

C

L

E

Only

$402.49

1.5" tall X 1.5" deep X 48” long - 4.15lbs (less cable) Mobile, on-site traffic directing LED Stik Microprocessor controlled with tactile front

Modes: left arrow, right arrow, center-out and alternating Varying flash patterns: left arrow, right arrow, center-out and alternating Extruded aluminum with 1/4" mounting groves on top bottom and back

Polycarbonate shield 12VDC w/ 2.1 amp draw max Standard 15' cable

Custom lengths of cable and extrusions available Ships complete with control unit, attached wire harness, mounting brackets, hardware and instructions. Comes with 15 ft cable , 30 ft cables are available.

TD92

This unit is the sam as the TD92 except it is in a 36”

Comes with 15 ft cable , 30 ft cables are available.

Only

$389.49

Only

$402.49

L

I

G

H

T

I

N

G

2 5/8" tall by 1 1/2" deep - 10 lbs. Mobile, on-site traffic directing LED Stik Microprocessor controlled with tactile front

Varying flash patterns: left arrow, right arrow, center-out and alternating

Extruded aluminum with 1/4" mounting groves on top bottom and back

Polycarbonate face shield 12VDC w/ 2.1 amp draw max Standard 15' cable

Modes: left arrow, right arrow, center-out and alternating TD93


26

Sirens you need

Only

$623.49

LCS800

V

E

H

I

C

L

E

The Unistar Command Center combines a full feature

200 Watt siren, an 8 function light control switch panel, and a traffic director controller (LCS850 only) all into one dual color keypad driven unit.

LED speaker diagnostics

Wail, Yelp, Air horn, Phaser, Manual, and Two Tone

Eight light functions

Dual color backlighting on keypad (Amber & Red)

Four position progressive slide switch with LED indicators

30 Standard function replaceable labels

Drives one or two 100 Watt speakers

Size: Control Head: 3 3/8"H X 6 3/4"W X 3/4"D

Size: Amplifier: 2 1/2"H X 7"W X 7 3/8"D (plus 3/4" flange)

Arrow stick control (LCS850) add $156.25.

The LCS880 &

LCS881 Series are a new ergonomically designed, hand held versions of the

LCS800 & LCS850

Unistar Command

Centers. They

LCS880 feature a 7 function light control switch panel, and a traffic director controller (LCS881 only) all into one hand held, dual color keypad driven unit.

New ergonomic design LED speaker diagnostics

Wail, Yelp, Air Horn, Phaser, Manual, and Two Tone

Integrated public address microphone

Seven light functions Only

Dual color backlighting on keypad (Red &

Green)

$451.59

Four position slide switch with LED indicators

Hand piece cradle for mounting or Velcro for concealed mounting

30 standard function replaceable labels


Size: Control Head: 6"H X 2 1/2"W X 1 1/2"D

Size: Amplifier: 2 1/2"H X 7"W X 7 2/8"D (plus 3/4" flange on each side)

L

Universal Slim Mount 100 Watt Speaker 100 Watt Speaker

I

G

H

T

I

N

G

This 100 watt universal speaker is ready for a

Only

$124.99

job. The weather proof design makes this speakers a great choice for any application.

The 6” wide X 6” high X 3” deep size will allow this speaker to be mounted behind almost any grille. Speaker includes universal mounting bracket.

ERP100B

ERP100W

This speaker is a full 100 watts in a compact

Only

$89.99

package. It is one of our most popular speaker. The bell housing is made of high-impact ABS plastic. This speaker can be mounted almost anywhere.

standard low profile driver includes L-bracket, hardware and mounting instructions.

Size: 5 1/4" High X 8" Wide X 7 1/4" Deep

Compact 100 Watt Speaker

D40

The D-40 is a compact, slimline speaker that fits in tight places.

solid cast aluminum, it works with a wide variety of sirens.

Only

$139.99

100 Watt Concealed Speaker

D30

Class A, Article 8, title 13 compatible.

The speaker includes a universal

"U" bracket, hardware, and mounting instructions. Ultra thin Solid cast aluminum, Class A, article

8 Title 13 compatible, 6 1/2" diameter / 2 1/4" depth, 100 Watts output, 11 Ohms impedance. If you need this unit to fit a 1998-

2002 Crown Vic, please order model D-40CV er conditions

12.75" Long x 4.63" Wide x 4.75" High

100 Watt output

11 Ohms impedance

This speaker is a full 100 watts in a compact package.

For concealed mounting

Fit for narrow spaces

Withstands all weath-

Only

$139.99


Sirens you want 27

SS700

6 siren modes

PA

200 watts of power

Manual mode

Only

$189.99

2- aux function switches

6” wide X 1 3/4” high X 6” deep

Includes: mic clip, wire harness, installation instructions

ERP200PD

Includes built in mic with

Only

Handheld operation with cradle

6 siren modes

200 watts of power

Space saving design

$209.99

Includes: cradle, wire harness, installation instructions ERP200DC

ERP300P

6 siren modes

PA


200 watts of power

Only

$249.99

Space saving design

Includes: wire harness, installation instructions

Trunk mount amplifier

Only

$199.99

LED speaker diagnostics

Wail, Yelp, Air Horn, Phaser, Manual, and Two-Tone


Size: 2 1/2"H X 6"W X 6 1/2"D

Includes: mic clip, wire harness, installation instructions

SS730

Only

$389.00


Control Head: D 1.5" / W 6.25" / H 2.75"

Amplifier Box: D 7.33" / W 7" / H 2.5"

200 watts of power


Integrated public address microphone


V

E

H

I

C

L

E

Two sirens in One!

SS741MG

L

I

G

H

T

I

N

G

Two sirens in one, the MAGNUM has two separate modes of operation each offering its own distinct tones

Two isolated amplifiers in one box


Only

Self-resetting circuit protection against speaker shorts

$467.25

Truck mount amplifier


Control Head: D 1.5" / W 6.25" / H 2.75"

Amplifier Box: D 7.33" / W 7" / H 2.5"

Output: 200 Watts (2 speakers)


28

Sirens you need

Only

$139.99

Only

$119.99

Air Horn

Only Unit

V

E

H

I

C

L

E

SS670

Wail, Yelp, Air Horn, Phaser, Manual, and

Two Tone

PA

100 watts of power

Manual mode

2- aux function switches

6” wide X 2” high X 6 1/2” deep

Only

$121.99

L

I

G

H

T

I

N

G

SS650


100 watts of power

Space saving design


6” wide X 2” high X5 1/4” deep

This unit is ideal for volunteers and vehicles with limited mounting space

SS651

Only

$149.99

LCS600

The LCS600 microphone control head features Public

Address function, Air Horn tone, and either Radio Repeat function or a 20 Amp Light Control relay. Also included are

LED indicators for Power and Auxiliary function (Light

Control or Radio Repeat function). On/Off/Volume is controlled with a rotary thumbwheel

100 watts of power

Amplifier Box: 1-3/4" H x 6" W x 5-3/4" D

Includes:wire harness, installation instructions

Only

$195.39

LCS653

The LCS653 is an ideal choice for undercover applications.

Like the SS651, this unit is ideal for vehicles with limited mounting space but also requiring the flexibility to control lighting or other auxiliary functions. It features a 3-position rocker switch that gives you Yelp and Wail tones while offering Manual siren control and Air horn override in the Standby mode.

Includes: wire harness, installation kit

5” wide X 1 1/2” high X4” deep

ERP100P

Only

$139.99


6” wide X 2” high X 5 1/4” deep Amplifier box

3” wide X 2 1/4” high X 1 3/4” deep

100 watts of power

Space saving design


This unit is ideal for volunteers and vehicles with limited mounting space. The SS651 features a 3-position rocker switch that gives you Yelp and Wail tones while offering

Manual siren control and Air horn override in the Standby mode.

Economical siren choice, but not on sound power. this siren gives 100 powerful watts on siren sound.

5 siren modes

Space saving design

Includes: wire harness, installation kit



Speakers for you

Speakers

Low Profile 100 Watt Speaker

This 100 watt universal speaker Our lowest profile speaker Designed for mounting where height is a concern 100 Watt Only output 11 Ohms impedance

$126.89

Size: 7" Long x 7" Wide x 4.75" High

D60LP

29

Chevy Caprice Low Profile 100 Watt Speaker

The D60CC was designed to mount behind the grill of late model Caprices, from 1995

100 Watt output

11 Ohms impedance

Only

$135.49

D60CC

Universal Mount 100 Watt Speaker

The D-60CV is designed for mounting behind the

Only

$148.19

grille of Ford

Crown Victorias. Includes bracket, hardware and mounting instructions.

Size: 5-1/4" High x 8" Wide x

7-1/4" Deep

Please remember to specify year of the vehicle D60CV

Universal Mount 200 Watt Speaker

The 200 watt pounder speaker is

200 watts of

Only

$139.99

siren power.

Use with any of our 200 watt siren for the powerful sound you need without 2 sperate speakers. The speaker can be mounted almost anywhere. Includes L-

ERP200 bracket.

Compact 100 Watt Speaker

This speaker is designed for exterior mounting. It is made of grey fiberglass for the Only bell housing which gives

$139.99

wide angle sound dispersion. The housing provides high

100 Watt output

Impulse/Aerostar 100 Watt Speaker

This speaker is designed to be mounted on

Impulse 2000

Only

$125.50

series lightbars. will work on others as well.

Minimum height consideration

Long tip provides enhanced sound performance 10" Long X

8" Wide X 5" High 100 Watt output D2000

Behind the Grille 100 Watt Speakers

This speaker is a full 100 watts in a compact

Only

$221.69

package. Slim

Profile Driver, Black Cast

Aluminum Housing, Universal or Year Specific mount option

Meets Class A Specifications,

Excellent for Law

Enforcement, Security, Fire, or Private Agency.

Dimensions: 5-1/4" High x 4" Width x 6-3/8" Deep (less bracket)

Choose for your specific vehicle:

2001 - present Dodge Durango D60CS

2003 - present Chevy Impala D62CS

1998 - 2002 Ford Crown Victorias D65CS

2003 - present Ford Crown Victorias D61CS

100 Watt High Gloss Speaker

D60C

This speaker is a full

100 watts in a output. L

High Visibility Speaker

Can be grill or bumper mounted

100

Watt out-

Only

$124.99

put

5.25" Long X 8" Wide

X 6.75" High

100 Watt High Motorcycle Speakers

V

E

H

I

C

L

E

L

I

G

H

T

I

N

G

One of our most compact speakers

Designed for

Only

$124.99

mounting on motorcycles

D60RRB

100 Watt output

11 Ohms impedance

6" Long X 7" Deep

D60RBS

Choose Glossy Black Finish or

High Gloss Chrome Like appearance finish.


30 Rotating Lights Lights you need

This light is built with heavy-duty, die cast, enclosed

Only

$45.69

bases. Shock mounted rotators with sealed roller bearings provide quit, smooth and maintenance free operation.Features polycarbonate lens. Fulfills or exceeds SAE low temperature operation specifications J845. Draws only

2.0 amps at 12V (Incandescent version) (4 amps Halogen).

Flash rate: 80 fpm standard; 160 fpm high speed.

Lens Colors: Amber , Red , Blue , Clear

20RH

This light has permanentmount protection from a depend-

Only able revolving warning light. It

$45.49

features polycarbonate lens. Fulfills or exceeds SAE low temperature operation specifications J845. Draws only 2.0 amps at 12V (Incandescent version) (4 amps Halogen) Revolving Halogen with Enclosed

455BH

Plastic Base and Clear Outer Dome


V

E

H

I

C

Our most popular revolving lights

Anodized

Only

$109.49

spun aluminum housing

Draws 6.5 amps at 12 volts

Flash Rate: 100 fpm

Exceeds SAE Low temperature operation specification J845.

400A

400B Our most popular

2 Beam revolving lights

Anodized spun

Only

$111.99 aluminum housing

Draws 6.5 amps at 12 volts

Flash Rate: 100 fpm

Exceeds SAE Low temperature operation specification J845

Both permanent mount and 3/4" pipe mount providedLens Colors: Amber , Red , Blue , Clear

L

E

L

I

G

H

T

I

N

G


The two sealed beams provide

90 flashes per minute for safety or industrial application

A fully "RF" suppressed, 100 inch oz. torque motor powers the 440A

Double bear-

Only

$111.99 ings on the output shaft and combination

Delrin/Nylon gearing for quiet, maintenance free operation and longer life. Motor protected by a slip clutch.Base is molded from high-impact ABS wrapped by a stainless steel band

Available in magnetic mount (model #440AM) and

24 volt version (440A-24V)

440A

Size: 8" diameter / 8.5" height


These powerful rotating light is great choice. They are equipped with a 55 watt halogen bulb.

Only

$39.99

The lights are 6 1/2” high X 4 3/4” wide. They are available as a permanent mount or magnetic.

Lens Colors: Amber , Red , Blue , Green

ERP102C

Our most popular 4 head revolving lights

Anodized spun

Only

$151.35

aluminum housing

Four powerful sealed beams to draw immediate attention

Flash Rate: 100 fpm

Lens Colors: Amber , Red ,

Current draw 12 amps at 12 volts

Blue , Clear 440A4

This economical rotating lights are good value.

They are equipped with

Only a 35 watt halogen bulb.

$39.99

The lights are 8” high X 7 1/4” wide.

Lens Colors: Amber , Red , Blue , Green ERP2A

These economical rotating lights are a good value.

Only

$37.99

They are equipped with a 23 watt halogen bulb.

The lights are 6 1/4” high X 5” magnetic. Lens Colors: wide. They are available as a permanent mount or

Amber , Red , Blue , Green

ERP1A


Get what you need

Tear Drop Shape Light

This extendable motorcycle warning light extends from

31” to 43” in height.

It incorporates our teardrop shaped rotator. Red , Blue ,

Green, Amber , Clear

Only

$69.99

ERP3D

Motorcycle Accessories

Strobe Light

This extendable motorcycle warning light extends from 28” to 44” in height. It incorporates one of our powerful strobes. Red , Blue ,


Only

$99.99

ERP7K

31

ERP8B

Strobe Light

This extendable motorcycle warning light extends from

33” to 40 3/4” in height. It incorporates one of our 4” wide X

5 Only

1/4” high

$99.99

powerful strobes. Red , Blue ,


Strobe Light

TP4000

LED diagnostics for easy troubleshooting.

Quad and random flash field are selectable.

28" to 48" Length

Potted circuit board protects this strobe from vibration, dust and moisture.

5.5" Dia.

X 4" H

Red ,

Only

$147.99

Blue ,


Motorcycle Siren

Only

$164.00

The unit is designed to operate one 100 watt speaker.

The SS651 features jumpers for

SS651MT option selection and is protected against speaker shorts with a self-resetting circuit and a high & low voltage shutdown feature. This models ships complete with wire harness with positive locking connector, hardware and instructions.

Wail, Yelp, Air Horn, Phaser

Drives one 100 Watt speaker

Control Head: 2 1/4" High X 3" Wide X 1 3/4" Deep

Amplifier Box: 2" High X 6" Wide X 5 1/4" Deep

3.5 lbs. Output: 100 Watts

100 Watt High Motorcycle Speakers

Only

$124.99

One of our most compact speakers

Designed for mounting on motorcycles

D60RRB

100 Watt output 11 Ohms impedance

6" Long X 7" Deep Choose Glossy Black Finish or

High Gloss Chrome Like appearance finish.

ERP25

$59.99

pair

20 Watt Motorcycle Lights

These low cost warning lights are designed for use with a Motorcycle.

The housing is corrosion resistant. The lights are 4 1/2” in diameter.

Red , Blue , Green, Amber , Clear

LED Warning Lights

This Starburst DLX3 LED light is perfect for any motorcycle lighting need.

11 different customer selectable flash patterns are available, including a

Steady On, for many customized possibilities.

Ships complete with five 3' attached wires, gasket, and instructions.

1-7/16" High x 4" Wide x 1-7/8" Deep

Available in Red , Blue , Green, Amber , Clear

Only

$59.95

V

E

H

I

C

L

E

This LED light is great for any motorcycle lighting need.

15 different customer selectable flash patterns are available, including a

Steady On, Design for wider light output Ships complete attached wires, gasket, and

Only instructions.

1-7/16" High x 4" Wide x 1-7/8" Deep $59.95

Available in Red , Blue , Green, Amber ,

Clear ERP151

ERP17

L

T

I

I

G

H

N

These 4” square LEDs are designed for use with a

G

Motorcycle. Get the powerful punch of a LED without the amp draw of a strobe or incandescent.

Red , Blue , Amber, Clear

Only $159.00 per pair

40 Watt Strobe Motorcycle Light Kit

RSK102 These 40 watt strobes are designed for use with a

Motorcycle. The housing is corrosion resistant. The lights are 4 3/4” in

Only diameter.

$255.00


V

E

H

I

C

L

E

L

I

G

H

T

I

N

G

32 Back Up Alarms & Flashers Products you need

Rugged die-cast construction for reliability in tough, noisy

Only

$63.15

localized areas for backup protection.

Perfect for heavy equipment, bulldozers, graders, etc.

Factory pre-set decibel rating of

107 or 112db.

61-112

Rugged ABS Plastic

Housing

Long-term reliability

Durable and Versatile

Convenient compact size

Range of decibel options

Serves on emergency and maintenance vehicles, construction equipment, trucks, buses, fire `trucks, lift trucks and utility vehicles.

Model Sound level Voltage

60-707A 77 - 97db 12-24v

60-802A 82 - 102db 12-24v

60-807A 87 - 107db 12v only

Only $75.30

Model Sound level Voltage

62-707A 77 - 97db 12-24v

62-802A 82 - 102db 12-24v

62-807A 87 - 107db 12v only

Single Tones starting at $22.99

Dual Tones starting at $29.49

Comes in a variety of sound levels.

Heavy Duty Die-Cast Housing

Long-Term Reliability

Durable and Versatile

Convenient compact size

Range of decibel options

Our most popular alarm serves on emergency and maintenance vehicles, construction equipment, trucks, buses, fire `trucks, lift trucks and utility vehicles.

63-000

Single Tones starting at $27.75

Dual Tones starting at $36.99

Automatically adapts to 10 db over the surrounding noise.

Effective protection, yet nonirritating.

Accommodates your needs in quiet areas or high noise environments.

Operates from 9 through 36V

DC with high-impact housing resistant to rust and corrosion. Range: 87-112 decibels.

Amp Draw: less than .5 amps

4 1/2" Grommet Mount, 97

Decibel Backup Alarm.

Mounts in any standard STT grommet designed to fit 4

1/2" diameter hole.

12VDC.

Amp Draw: less than .5 amps

Only $40.79

63-497

Only $35.99

Mechanical operation activated by gravity. No wires, no switches, no battery required. Attaches to wheel of vehicle.

Sounds off when vehicle moves even if vehicle is not in gear.

Can be adjusted to ring in forward, reverse, or both directions.

63-600

Flasher Units

Mechanical Flasher

Model

Solid State Flashers

Capabilities Price

Headlight Flashers

FM6901 Alternately flashes headlights at 1.9 flashes per second. Has high beam override and night time cut off.

$43.75

FM6902 Alternately flashes headlights at 2.9 flashes per second. High beam override and night time cut off and can handle up to 165 watts per

$47.69

$49.95

FM6903 Back Up/Brake Light Kit Simultaneously pulses headlights at 2.9

flashes per second and can handle up to 165 watts per output.

FM6904 Flashes left headlights three times. Flashes right headlight three times. Then pulses both headlights together three times

$47.69

Flashes two lamps.

1.2 flashes per second per lamp.

Mechanical flasher.

Switch included. Light Flashers

DRL3669C

Model

165 watts per side selectable flash patterns w/DRL Compatibility

Capabilities

$64.99

Price

$46.99

Only

$36.99

FM3661 1.9 flashes per second per lamp.

Use with 2 or 4 halogen lamps

FM3662 2.9 flashes per second per lamp

2 or 4 halogen light flasher

FM3667 Back Up/Brake Light Kit

$48.99

$63.40

FM3669 165 watts per side customer selectable flash patterns w/DRL Control

FM3669C 165 watts per side selectable flash patterns w/DRL Compatibility

$64.99

$64.99


Get what you need

4 Panel Switch Box

Switch Boxes and Switches

“L” Bracket Switch Panels

33

Each switch is rated at 20.0 amps

Single 2-position lighted switch.

$15.99

SB3015 $49.89

SB1515 $40.25

SP3015

$46.69

SP1515

$38.69

Mount under dash or on transmission tunnel

Choose from enclosed box or open panel

Models SB1515 & SB3015 are enclosed boxes

Models SP1515 & SP3015 are not enclosed

All four models have illuminated switching and individually fused circuits

Size: (All) l 4.5" / W 4.63" / H 2.13"

SB1515 and SP1515 have (4) 20 Amp Switches

SB3015 and SP3015 have (1) 30 Amp Switch & (3) 20

Amp Switches

Deluxe Switch Boxes

$96.59

SB4020

The deluxe switch box

Use this box to control your any six functions of your choice.

All switches are illuminated

Legends are backlit for easy night usage

One 40 amp circuit protected by a relay and self resetting circuit breaker

Five 20 amp circuits are individually protected by fuses

L 4.5" / W 4.63" / H 2.13"

Switching: (1) 40 amp circuit (5) 20 amp circuits

The deluxe switch box

Use this box to control your any other six functions of your choice.

All switches are illuminated

Legends are backlit for easy night usage

Features a 3-mode

SB4040 progressive, 40 amp(max) switch and 4-20 amp illuminated switches for a total of 7 fuse protected functions. (6"L X 4

3/4"W X 2 1/8"H)

$131.99

$20.89

$25.75

$30.59

Two 2-position lighted switches.


SP3860-2: ON/OFF, ON/OFF.

SP3860-2H: ON/OFF, HI/LO.

3-switch lighted rocker panel.

Three 2-position switches.

L-bracket panel mount.


SP3860-3: ON/OFF, ON/OFF, ON/OFF.

SP3860-3H: ON/OFF, HI/LO, ON/OFF.


Four 2-position switches.



SP3860-4: ON/OFF, ON/OFF, ON/OFF,

ON/OFF.

SP3860-4H: ON/OFF, HI/LO, ON/OFF, HI/LO.

$35.89


Five 2-position switches.



SP3860-5: ON/OFF, ON/OFF,

ON/OFF, ON/OFF, ON/OFF.

Deluxe Switch Boxes With Terminal

$104.79

Use to control any 6 functions of your choice

Five 20 amp individually fused rocker switches with illuminated power indicators

One 40 amp rocker switch with illuminated power indicator and protected by an internal relay and a self-resetting circuit breaker

Nine position terminal block

Legends are easily changed and backlit for nighttime readability

Dimensions: 2-1/4” H x 6-1/4” W x 6” D (including fuses and terminal block)

SB4020T is shipped complete with mounting bracket, 6 clear legend inserts, 36 interchangeable text legends, and complete wiring instructions

L

I

G

H

T

I

N

G

V

E

H

I

C

L

E


V

E

H

I

C

L

E

34 Brackets-Map Lights-Light Box

Stainless Steel Strobe Branch Guards

Branch guards for strobes

4” Strobe $23.99

274-40C

5”- 6” Strobe $23.99

274-40S

Products that last

Map Lights

High tech lights

Advanced optics

Powerful concentrated light source

Consumes only 5 watts of power

Pivot head

Flexible neck

Less than .5 amps

All weight less than 1 lbs.

274LMB

Light Back Flash Shield

Permits mounting from sides, back or front of vehicle where top mounted light would cause clearance problems.

Shields operator's eyes from cage mount applications on lift trucks and construction machinery.

Size: 7 1/4" X 8" X 8"

$45.99

ML-3 12- 1/2" lighter plug mount (7" flexible neck) $23.99

ML-4 7" permanent mount (4" flexible neck) $23.99

ML-5 21" permanent mount (18" flexible neck) $28.49

ML-6 13" permanent mount (10.5" flexible neck) $28.49

Light Mount Boxes

Self-Leveling Brackets

274-SL1

For Mini Bars

Weighted bottom.

Heavy gauge steel.

Mounts by 2 holes on 6 1/4" centers.

$90.85

274-SL

For all other lights

Weighted bottom.

Heavy gauge steel.

Mounts by 2 holes on 6 1/4" centers.

$53.99

Light Mounting Rack

E

Q

U

I

P

M

E

N

T

274-RCK

Use to mount multiple warning lights.

Standard bar clamps can be used for mounting to various vehicle rain gutters or door frames.

Standard 58" length (custom lengths available).

$183.99

Mirror Mount Kit

Allows standard 3/4" pipe mount warning lights to be mounted to truck's outside mirror.

Size: 2 1/4" X 2"

$26.99

274-MMB 1/2” NPT 3/4” Posts Only

274-MMBS 1/2” NPT, 1 1/4” or 3/4” Posts, Short Bracket

274-MMBT 1/2” NPT, 1 1/4” or 3/4” Posts, Tall Bracket

2741” NPT, 1 1/4” or 3/4” Posts, Short Bracket

2741” NPT, 1 1/4” or 3/4” Posts, Tall Bracket

121BX

Heavy Duty Enclosed Box for (1) 6” Oval

Light

121SBX

Heavy Duty Auto Leveling Enclosed Box for (1) 6” Oval Light

122BX

Heavy Duty Enclosed Box for (2) 6” Oval

Light

122SBX

Heavy Duty Auto Leveling Enclosed Box for (3) 6” Oval Light

123BX

HD Enclosed Box for (3heavy Duty 6”

Oval Light

131BX

Light Duty Enclosed Box for (1) 6” Oval

Light

132BX


Light

133BX


Light

141BX

Light Duty Enclosed Box for (1) 4”

Round Light

142BX


Round Light

143BX


Round Light

$88.49

$99.00

$113.89

$135.49

$153.39

$35.69

$53.49

$82.00

$35.69

$53.49

$82.00


Products that last Brackets 35

Crown Vic Rear Deck Mounts Crown Vic Dash Mount 2 Mic Bracket

Rear deck mounting bracket for Ford Crown Victoria

Only

No holes required

Mounts in the existing rear

$49.00

deck Child Safety restraints

Installs in minutes

Mount lights, radar antenna or traffic director

BB47517

Slotted mounting holes for easy adjustability

Kit includes: (1) pair of brackets, mounting hardware and instructions

No on else in the industry offers these simple brackets

BB28199

Only

$29.00

Dash bracket with double mic clip for Ford Crown

Victoria

No holes mount for two microphones

Mounts with existing 7mm screws behind the plastic trim for A/C heater controls

Easy access for the most used radio microphones

Includes: mounting hardware and instructions

BB47527

Rear deck mounting bracket for Ford

Crown Victoria

No holes required

Only

$29.00

Mounts in the existing rear deck

Child Safety restraints

Installs in minutes

Mount lights, radar antenna or traffic director

Slotted mounting holes for easy adjustability

Kit includes: (1) pair of brackets, mounting hardware and instructions

No on else in the industry offers these simple brackets

Auxiliary Light Mounts For Any Vehicle

274-DLX3RL

274-DLX3U

License Plate Light

Mount Bracket

$14.99

Universal Mount Bracket

$7.49

Trunk Mount Bracket

$7.49

Crown Vic Siren Dash Mount 1 Mic Bracket

BB28149

Dash bracket for siren with microphone clip for Ford

Crown Victoria

No holes mount, no console needed

Only

$29.00

Mount Sirens or radios


V

E

Installs in less than 10 minutes

Run wire behind trim

Siren not included includes: mounting hardware and instructions

H

I

C

Crown Vic Handheld Siren Dash Mount Bracket

L

BB28147

Only

$29.00


Crown Victoria




Siren not included


E

E

Q

U

I

P

274-DLXT

Crown Vic Handheld siren Dash Mount 1 Mic

BB28149

M

274-DLX3D

274-DLXW

Deck Mount Bracket

$7.49

Rear Window for Truck

Mount Bracket

$7.49

Only

$29.00


Crown Victoria




Run wire behind trip

Siren not included


E

N

T


36


Custom Look Consoles by Vehicle Cabinetry Company

V

Starting at Only

$375.00

VCCON1

Why use a rattly metal console when you can have a custom console from Vehicle Cabinetry Company for your vehicle. Choose from a high pressure laminate finish or a custom vinyl. The console top is finished with a marine grade poly board. You can choose options such as cup holders, storage pockets and more. Mount your radios with any standard mounting bracket from any manufacturer use our brackets. The choice is yours.

Designed for any vehicle. Remember to include year and make of your vehicle and requested options. If you need help, just call us, we will be glad to walk you through it.

Consoles by Legends Manufacturing

Legends Manufacturing is a provider of premier, quality vehicle mounts and accessories. Legends Manufacturing is fast becoming the preferred choice of fleet managers such as law enforcement, public safety, utility, telecommunications and the military.Legends value-engineered solutions are known for excellence, stability, reliability and strength – and the people of Legends are known for responsive, knowledgeable customer service. Our customers enjoy prompt, responsive service and ongoing support. Because of our efficiency and strong work ethic, consistently providing the finest value in the marketplace.

E

H

I

C

L

E

E

Q

U

I

P

M

E

N

T

Console Accessories

Panel

Armrest

$59.00

AR-PA

Extended

Panel

Armrest

$79.00

AR-EP

Drop in

Double

Cupholder

$59.00

CB-CH

Panel

Microphone

Clip

$44.00

CB-MP

Console

Microphone

Clip

$34.00

CB-MC

Low Profile Console

ProII Console

15” Console

CBLP

CBP2

Package Includes:

Panasonic Docking Station

DC-to-AC power converter

Console Box Assembly

3 – 4 Radio Faceplates

Swivel armrest

Large Cup Holder

4 – 12V Auxiliary Sockets

Only

$412.00

Vehicle Top Plate

Mounts to base plate - No drilling

Interchangeable faceplates

No drilling, tapping or sliding nuts

Machined from high grade aluminum to reduce weight and vibration

Package Includes:

Panasonic Docking Station

DC-to-AC power converter

Console Box Assembly

3 – 4 Radio Faceplates

Swivel armrest

Large Cup Holder

4 – 12V Auxiliary Sockets

Only

$412.00

Vehicle Top Plate

Mounts to base plate - No drilling

Interchangeable faceplates

No drilling, tapping or sliding nuts

Machined from high grade aluminum to reduce weight and vibration

Drop In

Storage

Pocket

$59.00

CB-IP

CB15

Specifications & Dimensions:

9.25" Wide x 8.5" Height x 15"

Length

Mounts to top plate for no

Only

$389.00

drilling

Faceplates are interchangeable

Slotted rails for ease of faceplate installation

Black Powdercoat Finish


Consoles that last Consoles For GM SUV’s

This is a custom made console buy Vehicle

Cabinetry Company, for newer style

GM Yukon, Yukon XL, Chevy

Suburban and Tahoe. Get the con-

Consoles

sole plain or equip it with cupholders, storage pockets or radio mounts.

All consoles begin at $375.00. Call to assist you with you order.

$375.00

THC1

37

Radio Organizers and Mounts

Horizontal & Vertical Radio Organizers

Sturdy Organizers

Communication and switching within reach.

Accommodates any combination of sirens, switch boxes, radios and other equipment.

SR7 Vertical mount, 4.25" X 11"H

SR9 Vertical mount, 4.25" X 12.5"H

SR10 Horizontal mount, 12"L X 7"H

SR12 Horizontal mount, 14"L X 7" H

$31.99

$35.49

$41.59

$44.29

Holds up to 3 Radios

Slotted Mounting Brackets

This unit attaches to a top plate

CB-UV

Universal Console

$239.00

Utility Console

6.0" wide x 7.0" deep storage pocket

Double Oversized Cupholder


CB-RR

Radio Relocation Box

Relocates AM/FM Radio from stock location to just below climate controls

Available for 1991 - Newer

Crown Victoria

Attaches to ashtray cavity

8” high X 8.7” wide X 5.7” deep

$79.00

CB-UT

Impala Contour Console

$269.00

Crown Vic Contour Console

Mounts forward of seats and contours dash

Holds 12" of faceplates (3-4 radios)


Contour fits dash

Slotted rails for no drilling or tapping


$220.00

CB-IP

$94.00

Top Plate

TP-24

Mounts between console and vehicle legs for no-drill installs of console

For use with any console box

$240.00

CB-CVC

Dodge Adapter Plate

Can be placed in center or offset from factory installed top plate

No-drill installation


$34.00

CB-RR

See our website or call us for assistance with “no drill” legs for any of these bases

V

E

H

I

C

L

E

E

Q

U

I

P

M

E

N

T


E

Q

U

I

P

M

E

N

T

V

E

H

I

C

L

E

HT155

38 Computer Mounts

MDT MOUNT WITH TELESCOPIC PEDESTAL


MDT MOUNT TELESCOPIC WITH QUICK RELEASE

Steel telescopic pedestal with 5" post

• MDT mounting plate

• 1" Square Telescopic post

• Quick release post

• Ball joint with "LOCK-IT" clamps

• For small to medium size MDT

• Contoured designt

• 5" high base post

$75.00

• Adjusts from 9" to 13"

• 4" x 5" steel base plate

Telescopic for Radio&MDT with Quick

Release

• Quick release

• MDT mounting plate

• Radio mounting plate

• 1" Square Telescopic post

• Adjusts from 9" to 13"

$135.00

• 6" x 6" steel base plate with 3" stabilizers

• Ball joint with "LOCK-IT" clamps

• For small to medium size MDT

HT1160QRT

CENTER SLIDING MOUNT

TELESCOPIC LAPTOP MOUNT

HT4119

$515.00

Reaches over hte lap of the operator

Can be used in front of dash console or between dashboard and console

Telescopic Adjustment

Spring assisted

Lowers to 7" when collapsed

Reaches 10" when extended

Swivel Control Under Tray

360° rotation

Sliding Tray

Slides laptop tray 5" forward using

UHMW tracks and 3 latching points

Tilt Adjustment

Up to 20° angle (Panasonic dock only)

Latching Pivoting Arm

Quick and easy store away thumb action latch (3 preset positions)

FIRE APPARATUS LAPTOP MOUNT

HT2002

HT2008

20° tilt

• 6" to 9" tall

• 6" x 4" x 0.125" base plate

$155.00

LOW PROFILE LAPTOP MOUNT

Triple swivel Twin Arm

System

• 20° tilt

• Low profile 3.7" tall

• 12" x 8" x 0.25" base

$325.00

See our full line of Computer

Mounts on our website

HT2009

Single Arm

• 20° tilt and 360° swivel under tray

• Adjustable angle base

TOWER MOUNT FOR FLATSCREEN & KEYBOARD

$285.00

TABLET PC MOUNTING SYSTEM

Adjustable Universal Tray

• Holds Tablet PC

• Holds Laptop PC

• Keyed Cam Lock

• Adjustable Hold Down Clips

Tilt and Swivel Control

• Single Knob

• 360° Swivel

HT5005

• 110° Tilt

• 1" Shafts

Telescopic Adjustment

• Single Knob

• 1.5" Square Post

Keyboard Support (optional)

• Telescopic Arm

• Ball Joint Under Keyboard

• Swivels together with the Universal Tray

$425.00

HT5130

Display Mounting Plate

• Custom designed to fit any flat display.

Display Ball Joint Adjustment

• Allows operator to tilt or swivel the display and the keyboard independently to achieve a safe and ergonomically pleasing position.

Display Height and Swivel Control

• Designed to gain access to the vehicle's instrument panel and to position it at the appropriate height.

Keyboard Support

• Flat mounting surface hosts most keyboards.

$475.00

Mounting Base

• Mounts under central front seat bolts.

OPTIONS:

Mounting Brackets for Other Equipment

• Hardware necessary to hold the specific equipment (Radio, CPU, etc.) to be mounted at the base.

Extra Mounting Arms

• Extra arms can be added as needed to mount a wide selection of equipment.

Keyboard Height and Swivel Adjustment

• Twin arm system places keyboard within driver's reach for comfortable ergonomic operation. Stores the keyboard at the desired height and distance from the dashboard.


Tough Products

39

Vehicle push bumper by Legends consist of one-piece solid steel construction with a key and mortise design for maximum strength. The black powdercoat finish and UV-resistant rubber allows for long lasting use.

Dodge Chargers Ford Explorers

Crown Victorias Durangos

Field Tested by City, County, and State Law Enforcement Agencies. Unique design approved by installers for ease of installation. Redesigned for improved visibility and impact resistance

Constructed from heavy gauge steel and reinforced with a tongue and groove fitting

Does not interfere with SRS airbag system. 5-stage powdercoating process for durability and longevity. Pre-drilled for lights and speakers. Uses UV-resistant rubber to prevent cracking

PB-CG

PB-CV

PB-DR

PB-EP

PB-EX

PB-IP

PB-TH

Dodge Charger

Crown Victorias-Brackets connect to the frame

Dodge Durango

Ford Explorer

Ford Expedition

2006 to present Chevy Impala

Tahoe/Yukon/Suburban(Specify 2WD or 4WD)

$297.00

$278.00

$333.00

$333.00

$333.00

$297.00

$333.00

Add the Pit Boss Option to Your Push Bumper

Add the PIT BOSS option your Crown Vic, Impala or

Tahoe/Yukon.

VE-PBCV

VE-PBIP

VE-PBTH

Pitt Boss for Crown Vic

Pitt Boss for Impala

Pit Boss for Tahoe/Yukon

$231.00

$231.00

$256.00

Constructed from Heavy

Gauge Steel and finished with black powdercoating.

SKID Plates

Made from Heavy Guage Steel. These units bolt up to factory holes

$75.00

VE-RP

$130.00

VE-SP

$75.00

VE-TP

E

Q

U

I

P

M

E

N

T

V

E

H

I

C

L

E

Radiator Plate Extension for

Crown Vic

Standard Skid Plate for Crown Vic

& Impala

Transmission Skid Plate for

Impala


40

FIRE/RESCUE CABINETRY

Vehicle Cabinetry Company provides custom made vehicle cabinets to meet the needs of today's Emergency Services. If you need a Fire

Chief's vehicle cabinet, EMS response cabinet , Police Unit Cabinet or Incident Command cabinet we are your company. You can choose from one of our stock designs or have a unit custom made for you without the custom price. Order from our distributors or call us to assist you.

As Always, FREE CAD design for your custom vehicle cabinetry needs.

FD-101

$1875.00

FD-102

$2152.50

FD-103

$1875.00

V

E

H

I

C

L

E

E

Q

U

I

P

M

E

N

T

48” W x 24” D x 28” H

Command Board, O2 storage, extinguisher storage, medic bag,

SCBA & equipment storage and more. Diamondplate is optional

FD-105

$2272.50

48” W x 24” D x 30” H

Command board, SCBA and equipment storage area radio mount panel, laptop drawer, file drawer, writing surface area and more

FD-108

$2152.50

48” W x 24” D x 30” H


SCBA & equipment storage, file drawer and more

FD-106

$2025.00

48” W x 24” D x 28” H

Command board, medic bag, SCBA and equipment storage area radio mount panel and more

FD-109

$2152.50

48” W x 24” D X 26” H

Command Board, O2 storage, extinguisher storage, SCBA, turnout gear and other items.

FD-107

$2085.00

48” W x 24” D x 28” H


SCBA,turnout gear and more

Diamondplate is an additional option

FD-123

$1775.00

48” W x 24” D x 30” H

Command board, medic bag, SCBA and equipment storage area O2 storage, extinguisher storage, file drawer and more

48” W x 24” D x 28” H


SCBA, turnout gear and more

SCBA bracket is an additional option

Flashlight is an additional option

48” W x 24” D x 20” H

Command Drawer, O2 storage, extinguisher storage, SCBA, turnout gear and more

Diamondplate optional, available with flip up command board

These cabinets are designed for SUVs. Each cabinet has its own unique features. Determine your needs and view our pre-engineered layouts. If you need a special design or a change to one of our existing cabinets, we are the company you need.


41

EMS CABINETRY

Vehicle Cabinetry Company offers a variety of options, including color options for your cabinet finish.You can choose from grey, beige, blue or green. You can also have any area finished in .188 diamondplate for added protection in areas such as SCBA or tool storage areas. Our EMS cabinets have an optional heater for keeping your medical drugs from freezing in cold weather.

EMS-201

$1375.00

EMS-210

$2152.50

EMS-203

$1650.00

48” W x 24” D x 26” H

MCI tracking board, O2 storage, medic bag, equipment storage and more

48” W x 39” D x 32” H

Designed for storage of multiple EMS items including AED, medic bags, O2 and more. Flip out patient transport board also included.

EMS-205

$1650.00

48” W x24” D X 26” H

Designed for storage of multiple EMS items including AED, medic bags, O2 and more

EMS-204

$2340.00

EMS-213

$1650.00

48” W x 24” D x 30” H

Our most popular EMS design. MCI command board, adjustable shelves

O2 storage medic bag storage, file drawer and more items for storage

EMS-211

$1860.00

EMS-216

48” W x 28” D x 28” H

Storage for multiple EMS items,

AED, O2, medic bags and much more.

$3152.50

48” W x 24” D x 24” H

Storage for multiple EMS items,

AED, O2, medic bags and much more. Includes a storage drawer.

48” W x 30” D x 20” H. A 20” extension box is included for long board storage and full splint storage. Pull out drawer for easy equipment access. Storage drawers. Straps can be added for bottle storage on extension with side access as well as mounting of equipment on the opposite side.

48” W x 30” D x 28” H

Storage for multiple types of EMS equipment

EMS-220

$3775.00

48” W x 68” D x 28” H Multiple storage areas.

Long board storage, medical equipment throughout the unit. This unit is designed for an excursion but can be modified to fit any

SUV.

All of our EMS cabinets can be extended to fill the entire rear section of your SUV, including Durango's and Explorers. When ordering always remember to specify your vehicle type to determine the proper fit. Newer Expeditions may need a mounting platform due to the 3rd row seat designed body. Cabinet option are available for access storage from the side doors. Special heater units are also available.

E

Q

U

I

P

M

E

N

T

V

E

H

I

C

L

E


42

LAW ENFORCEMENT CABINETRY

Our variety of Law Enforcement cabinetry has many available features. Push button combination locks, multi point “D” ring locks, Medeco locks, aluminum weapons storage drawers, weapon cushion storage and more.

PD-401

$1875.00

PD-402

$2325.50

PD-403

$2745.00

48” W x 24” D x 15” H

Two pull out drawers, which are 6” in height each, for storage of various types of equipment. Drawers can be fit to any type of optional locks.

V

E

H

I

C

L

E

PD-409

$2250.00

E

Q

U

I

P

M

E

N

T

48” W x 39” D x18” H

Pull out drawer with heavy duty slides.

Multi point “D” ring locks. Optional nonskid material can be added on top for other storage

PD-407

$2460.00

48” W x 39” D x 32” H

Storage for multiple traffic safety equipment as well as other equipment. Pull out drawer is a nice spot for road flare storage

48” W x 24” D x 26” H

Two drawers which are available with optional lock features and storage for road safety items as well as other equipment

PD-405

$2025.00

48” W x24” D X 26” H

2 large drawers and 2 smaller drawers.

Equipment storage area including area for storage on top of unit. Optional cargo nets are available

PD-406

$2025.00

48” W x 24” D x 18” H

3 drawers, one with multi point lock, top drawer has center divider.

Other optional divider items are available. Other locking systems also available

48” W x 39” D x 24” H

Storage for multiple types of traffic safety equipment as well as other equipment. Pull out drawer is a nice spot for flare storage

PD-408

$2187.00

48” W x 24” D x 18” H

Multiple locking drawers for various equipment storage. Optional drawer dividers are available. Various drawer locks are also available

These cabinets are designed for

SUVs. Each cabinet has its own unique features.

Determine your needs and view our pre-engineered layouts.

If you need a special design or a change to one of our existing cabinets, we are the company you need.

We realize that each agency has their own needs and we are here to help you meet those needs. Call us for a special design unit.


43

INCIDENT COMMAND CABINETRY

Every Incident Commander likes to operate in their own way. Our variety of Incident Command Cabinets are designed for use for the

Fire/Rescue EMS and Law Enforcement Divisions. Units are available with laptop storage drawers, command boards, radio mounting panels, file drawers, writing surfaces as well as other IC needs. Power point connection, pass through holes locking cabinets and drawers and special cabinet illuminations are just a few options that can assist you in your operation.

IC-301

$2362.00

IC-302

$2025.00

IC-303

$2512.50

48” W x 24” D x 30” H

IC board, monitor or equipment area, file drawer, laptop storage, printer storage or other equipment storage. None of the equipment shown is provided

IC-304

$2152.50

48” W x 24” D x 26” H

IC board, radio mounting panel which can be expanded to fit additional radios if needed and other storage areas. .

48” W x24” D X 30” H

IC board, file drawer, laptop drawer and other storage areas.

IC-305

$2655.00

IC-306

$2995.00

48” W x 24” D x24” H

IC board, file drawer, storage areas including on top of unit. Optional high pressure laminate or plexiglass is available for top section

48” W x 24” D x 30” H

IC board, 2 pull out drawers for storage, laptop drawer and radio mounting plate on top portion of cabinet

48” W x 24” D x 28” H

IC board, full size storage drawer, laptop board, other storage drawer. Light is an option

IC-307

$2430.00

48” W x 24” D x 28” H

Command board, two file drawers, laminate writing area, storage for multiple command items

IC-309

$2514.50

48” W x 24” D x 24” H

Command Drawer with flip up command board, file drawer, set back radio mounting board and storage area

These cabinets are designed for

SUVs. Each Incident

Commander has different needs, that is why there are many different designs. There are many items for Incident

Command, each with its own shape and size, that's why we are here to make your equipment fit right. When planning your cabinet, always have the full outside dimensions of your equipment to assure the proper fit. If you need help, call us, we will gladly assist you with your plans.


E

Q

U

I

P

M

E

N

T

V

E

H

I

C

L

E

44

AVAILABLE OPTIONS FOR YOUR CABINETRY

Add a Command Drawer with a Flip-Up Command Board

Try this in place of the standard command board includes map storage and a flip up command board with clear plexi glass

Diamond Plate SCBA BRACKETS LOCKS AND LATCHES

V

E

H

I

C

L

E

Diamond plate is available for heavy duty use areas, such as, SCBA areas and work tool areas.

SCBA brackets are available to fit any Air

Pak

Key Locks, Combo Locks,

Push Button Locks, “D” ring latches, push button latches, paddle handle latches are just a few of the options that are available for closing and securing your drawers and doors.

E

Q

U

I

P

M

E

N

T

CABINET FINISHES

Our cabinets are finished in with a gray marine grade carpet. You can also choose a High pressure laminate in any color of your choice at no additional cost.

Design Your Own Cabinet

If you don’t see a style you want or you have a special need cabinet, you can design your own or have us design it for you. You can choose from the options below.

Basic Box 48” wide X up to 28” high X up to 24” deep $1650.00

Command Board

Command Drawer with flip up command board

$225.00

$450.00

File Drawer

Standard drawer

Magnetic Dry-Erase board

$277.50

$210.00

$105.00

Diamondplate SCBA/Tool Area

Radio Panel

Cabinet Door with standard latch

Locking door and drawer latch

SCBA Bracket mounted

Adjustable shelves per compartment

Additional Depth of Cabinet up to 6” **

Additional Height of Cabinet up to 6” **

$225.00

$150.00

$187.50

$27.00

$72.00

$187.50

$300.00

$300.00

A final drawing of your cabinet will be sent to you prior to construction of your cabinet. Build time is approximately 4 weeks from date approved drawing is received.

We can ship your cabinet to wherever you want

** Please note that your cabinet can be as deep as you want, but this price is for every 6” additional.


Be Sure....Be Safe 45

Barricade Tapes

Our Barricade Tape is a lightweight, economical, reusable polyethylene, with a continuous repeat of message or warning.

Can be tied, stapled or nailed in place. Meets OSHA

1910.144 for marking physical hazards.

Comes standard 3" x 1000'. Also available in Spanish.

HIBT-26 Crime Scene Do Not Cross $9.99

HIBT-27 Fire Line Do Not Cross $9.99

HIBT-28 Police Line Do Not Cross $9.99

HIBT-29 Security Line Do Not Cross $9.99

HIBT-30 Sheriff's Line Do Not Cross $9.99

Our Barricade Tape is a lightweight, economical, reusable polyethylene, with a continuous repeat of message or warning.

Can be tied, stapled or nailed in place. Meets OSHA

1910.144 for marking physical hazards.

Comes standard 3" x 1000'. Some also available in Spanish.

HIBT-49 Danger Danger Danger $9.99

HIBT-50 Danger Do Not Enter $9.99

HIBT-51 Danger Hazardous Area $9.99

HIBT-52 Danger Hazardous Area Keep Out $9.99

HIBT-55 Danger Keep Out $9.99

Telescopic Expandable Portable Barricades

This portable telescopic barricade extends from 19” to 8 feet in seconds. It only weighs 15 lbs, making it light enough to carry, but stable enough for traffic conditions. The barricade is 43” high and can be locked into place to your desired size.

This unit has 52 reflective stripes on it. is great for both vehicle and pedestrian traffic control. The barricade also includes 2 safety strobes that easily attach to the barricade post sections. The base of the barricade can also be filled with sand or water for extended use operations. The unit collapses easily

Only

$259.00

each into itself for easy storage and convenience to transport.

TELBAR

Instacade Portable Barricades

Insta-Cade introduces a revolutionary pedestrian management barricade that makes sense for everyone. Insta-Cade lets you set up seven feet of protection in just seconds. The unique X-brace design unfolds instantly to create the most complete barricade system anywhere.

Fire/Police personnel love the easy of use, the compact storage and the lightweight design. It might be light in weight, but the revolutionary design keeps this unit standing even in tough winds. This

Weight – 14 lbs.

unit can be deployed in just seconds. Block a lane of traffic in an instant with Flex Safe.

Insta-Cade Product specifications Only

Powder Coated Light Gauge Steel Tubing

$279.00

each

38”h x 38”w x 7ft 4” l (Open) INSTACADE

48”h x 6”w x 8”l (Closed)

Add attachable legends:

Arrows

Police Line

Road Closed

NCHRP-350 Crash Tested & Approved

(USDOT Safety Standard for Work

Zone/Roadside Use)

Add a carry bag for only $15.00

S

A

F

E

T

Y

T

R

A

F

F

I

C


T

R

A

F

F

I

C

S

A

F

E

T

Y

46

Be Sure....Be Safe

Roll Up Portable Arrow Boards

When we say that this traffic arrow is portable, we're not kidding.

This arrow measures 32" wide X 18" high. It sturdy Black vinyl and is equipped with heavy duty magnets and grommets for universal mounting.

You quickly mount this to your trunk or rear of your SUV or even on the side of your vehicle.

When you are done, simply roll it up and put it away!

It is powered by 3 "AA" batteries that give you 100 hours of constant operation. Here is the best part. It rolls up neatly into a pouch for easy storage.

This unit is a MUST for Fire Police, Police, or anyone who is on the road and needs to direct traffic. It is small enough to store in your trunk, but big enough to move traffic.

Rolled up the unit is a mere 4" wide. You have to see this to believe it!

Only

$59.99

The arrows are equipped with 9 super bright LED each arrow as well as each arrow being reflective

TA4685

Go to our website to see this unit is action.

with carry bag

Ez-Stor Road Cones

EZ-Stor Road Safety Cones are collapsible Road

Cones that meet Federal standards. Imagine carrying four (4) 28" road safety cones in the trunk of your vehicle while only using 1 cubic foot of space. Each

Ez-Stor road safety cone also has a cluster of LED interior warning lights for extra night time safety.

Each set includes a custom carry case. These ez-stor road safety cones are a must have for law enforcement, firepolice units, fire apparatus, Utility Company supervisors or anyone who values space in their vehicle.

Only

$139.99

a set of 4

EZSTSACO

Portable Speed Bumps

SLOW 'EM DOWN with our portable Speed Bumps. These speed bumps are easy to deploy and offer a more safer scene.

Perfect for Scene Safety

On demand speed bump, only deploys when needed

All weather self-contained speed bump

Community friendly

Only

$425.00

with carry bag

Eliminate maintenance problems associated with permanent speed bumps

Relocate from site to site

Great for School Zones, Emergency Scene Zones, Traffic Stop Zones just about anywhere you want motorists to slow it down.

SBM3A



Handheld Stop Sign

STOP1

Only

$15.99

This handheld nonlighted, non-reflective

STOP sign is 18" with

6" letters. It has a 10" handle.

They are available with STOP on both sides or STOP on one side and SLOW on the other.

Only

$90.99

Telescopic STOP Sign

Reflective 24”

STOP/SLOW sign with

Tele-Pole

Quick coupling allows the

Tele-Pole handle to telescope for increased bottom height and storage.

Our tele pole telescopes to a maximum bottom height of 84”. Also available with an 18” reflective sign.

STOP2484R-POLE84

47

Reflective Handheld Stop Sign

This reflective hand held sign is

18" in diameter and is made of the same ACM material that is used for large construction signs. The reflective material makes this great for use at anytime of the day or night.

STOP18121R

Only

$45.99

Lighted STOP Sign

Ultra bright light emitting diodes within the text

Distinctive flash sequence

Microprocessor controlled

Automatic activation of LEDs when held upright

Battery powered (3 ‘C’ cells, not included)

18” Octagon shape, 6” Letters

TCS-1: STOP/SLOW Traffic Control

Sign (113 LEDs)

TCS-2: STOP/STOP Traffic Control

Sign (104 LEDs)

TCS-6: 6’ Extension Pole (not shown)

Optional Pole:

$35.99

Only

$169.99

T

R

A

F

F

I

C

STST-112 12" STOP/STOP Sign $189.00

STST-118 18" STOP/STOP Sign Lighted $299.00

STSL-118 18" STOP/SLOW Sign Lighted $299.00

SLSL-118 18" SLOW/SLOW Lighted Sign $299.00

STST-124 24" STOP/STOP Lighted Sign $349.00

STSL-124 24" STOP/SLOW Lighted Sign $349.00

SCO-012 12" Vinyl Carry Case



ST-639

TP-619

G-521

Stand for Light for Life Sign

Telescopic Pole

Metal Guard

$24.95

$29.95

$34.95

$159.00

$49.00

$89.00 per set

Light For Life LED Traffic Signs

Light For Life Signs are unlike any other traffic control sign on the market today!

Using an array of ultra-bright LEDs in a pixel arrangement, our 2-sided “paddletype” sign will capture the attention of all approaching traffic in any weather condition. Visible for up to 1 mile at night, in low light and no light situations! Handheld or stand-mounted, our battery powered signs are programmable, sequence flashing, lightweight, durable … highly visible.

Our signs feature a “quick-change” battery module, and a telescoping handle for sturdy base support and can be mounted on any vehicle with a quick release arm that holds the sign securely.

Single and double, hard and soft cases are also available for ease of transport.

Our signs will be seen before headlights contact the control safety sign. Now you can be sure your sign is visible! Standard signs will have “STOP-STOP”, “STOP-

SLOW” or “SLOW-SLOW” configuration.

Programmable signs will have five optional wordings for each side.

S

A

F

E

T

Y


T

R

A

F

F

I

C

48


TurboFlare USA

The TurboFlare is a multi-task, extremely bright, personal safety device. This revolutionary product is a true technological achievement in safety equipment.

The TurboFlare is rugged, reliable, and economical.

Conveniently powered by only 4 'AA' batteries, it provides a bright rotating light source visible from great distances. And the TurboFlare will run for more than 88 hours on a single set of batteries.

The body is shock proof, vibration proof, and weatherproof. When everything else around you fails, you can always trust your TurboFlare to stay strong when you need it the most.

You can also purchase a single unit for $19.95 each , no case is included.

TURBO36008

Traffic Guardian LED Traffic Safety Lights

Equipped with 16 super bright LED (red or yellow available) it gives 360* coverage with over 10,000 hour LED life

Nine different selectable flashing patterns to choose from, including a Built-in S-O-S Morse Code distress signal!

High power magnet attaches easily to metallic surfaces such as your vehicle, police car or fire apparatus.

Constructed of super high strength plastic with a TPR plastic shield. Virtually crush-proof. It can be driven over by a truck.

Completely water-proof at depths over 100 feet.

Visible over 300 yards in daylight, up to 1 mile at night, up to 10 miles from the air. Great for Landing Zones

One CR123A high capacity lithium battery provides up to 100 hours of continuous working time. Battery has a 10-year shelf life.

Only

$249.00

per set

Only

$139.99

a set of 6

S

A

F

E

T

Y

ELZ™ / Traffic Safety Strobe

2C71008

No ignition danger, no more burns or ruined uniforms. These environmentally friendly strobes replace flares and are safer and more economical to use. These completely waterproof strobes perform a host of duties–explosion resistant roadside hazard markers, underwater SAR markers, command post or escape route markers, traffic control, hose markers and search

Only

$69.95

each markers. The weighted, spring loaded bases keep the Strobe 200 upright on all surfaces, even with heavy wind or rotorwash. No assembly is required, so there's no fumbling around in the dark. Each strobe is 3.5 pounds and 9.5" tall and folds for compact storage.

Shipped with RED lens, standard. Available with 6 optional lens colors including infrared (IR).

Light folds flat for storage.

ELZ™ / 5 Pack Traffic Kit

Each strobe is 3.5 pounds and 9.5" tall and folds for compact storage. Available with 6 lens color options including infrared (IR) packed in a waterproof case. Red.

Amber Blue or

TS571008

Clear

Only

$562.95

each

ELZ™ / 10 Pack Traffic Kit

Each strobe is 3.5 pounds and 9.5" tall and folds for compact storage. Available with 6 lens color

Only options including infrared (IR)

$814.95

each packed in a waterproof case.



49

Road Flares

Our Flares feature the SAFE-T-CAP® Spark

Deflectors system

They also have Plastic Roll-Prevention Caps with a Tab Protective Wax Coating (high temperature clean wax)

The flares have a Lifetime Limited Warranty and they Exceed the Industry Specifications for

Visibility

Our Flares are listed in the Underwriters

Laboratory UL912 and they meets DOT and

ICC Specifications

Orders under 10 cases will be shipped Fed Ex Ground. A $20.00 Fed Ex Haz Mat fee applies to each case. Orders over 10 cases will be shipped by common carrier and save the Haz Mat Fee. Ship to Continental US only.

Flare Containers

30 Minute Flares With Wire Stand

1-9 cases $87.95 each

10-20 cases $78.95 each

21-30 cases

31-50 cases

51-99 cases

100 or more

$69.95 each

$66.95 each

$63.95 each

$60.95 each

30WS 36 per case

20 minute flares with wire stand 72 flares per case: $130.95.

Call for pricing for orders over 10 cases.

20WS

Our Road Flare containers your road flares. Small enough to store anywhere. The 20 and 30 minute containers include a handle. Molded from durable plastic that resists the wear and tear of tough use.

(Flares not included) Description "FLARES" molded vertically on the side in raised letters.

FC30

FC3 FC20

Item# Description Price

FC-3 Holds (3) 20/30 minute flares $6.95

FC-20 Holds (12) 20 minute flares $8.75

FC-30 Holds (12) 30 minute flares $9.25

Flare Container Bracket Set

Holds a 30 or 20 minute flare container.

FCBKT $5.95

T

R

A

F

F

I

C

Traffic Cones

TRI-GLO SERIES

All vinyl construction assures durability and flexibility in all weather conditions.

Long lasting brilliant fluorescent color provides high visibility protection.

Ultraviolet stabilized color provides maximum resistance to fading.

High density base creates low center of gravity for maximum stability.

Meets MUTCD requirements.

Extra shipping cost may apply. Large orders will ship by common carrier, call for rates.

Buy cones individually

Item # Description Price

LP1850 18” cones non-reflective $8.99

LP1850R 18” cones reflective $11.99





Buy cones by the case and save!

Item# Description

LP1850CS 18” cones non-reflective

LP1850RCS 18” cones reflective


Case Pack

20

20

8




8

8

8

Price

$173.99

$144.99

$123.25

$187.95

$151.95

$222.35


S

A

F

E

T

Y

Safety Strobe


SAFSTRB

50

S

A

F

E

T

Y

T

R

A

F

F

I

C

The SafetyStrobe is an all in one light weight handheld flashing strobe light used for traffic direction with a built in 20 watt megaphone, a piercing whistle function, a flashlight mode and it is rechargeable!

12 volt DC or 110 AC both options in one unit. The units weighs only 1 pound and can used for many different functions. Police officers, firepolice, fire wardens, any type of traffic operations, or any type of crowd control or security functions. There isn't a more multi-functionable device on the market today. you need it the most. This unit is perfect for Law Enforcement, Fire Police,

Fire Wardens, Parking Lot Attendants or anyone that needs to get the attention of people!

Only

$179.99

Only

Traffic Commander

$33.99

It’s Magnetic

The Traffic Commander

LED hand held light is a powerful tool is traffic safety. This traffic direction unit is the brightest

LED light on the market.

It is equipped with 3 modes of use. Steady, flash and flashlight. It also has a strap that you can wrap around your wrist so you don't have to worry about dropping it. It also has an exclusive magnetic bottom so you can mount this on the side of your vehicle or use it to protect a dangerous area such as a low guard rail. You have to see this light in action!

Flashing Double Function Traffic Triangle

This traffic triangle does double duty. It is a reflective triangle and also a LED flashing triangle. The unit is powered by 2 AA batteries and also comes with a

30 ft 12

Traffic Flags

IHFLGXX

Only

$39.99

volt power cord.

These traffic flags are available in 18inch X 18 inch or 24 inch X

24 inch. It is available in Orange solid or Orange mesh. It is a equipped with a wooden dowel to hold in your hand or mount in a holder. 18” X 18” Flag- $4.25

24” X 24” Flag- $6.75

INCIDENT AHEAD

ROAD CLOSED

MERGE

W/ARROWS are also available

You can also have a custom legend to meet your specific needs

BSXXXXPSZ-412-S

Hi Viz Pink Roll Up Traffic Signs

The "PINK" has become the new standard in emergency scene management. Our signs are available 36” or 48”. The signs have a highly reflective pink and come with a springless stand that neatly folds into a compact storage position. An optional carry bag is also available.

The SafeZone Series SZ-412 is a super lightweight compact springlesssign stand for use with roll-up signs. Easy to use and easy to store, itssingle sign attachment point allows for quick deployment in the field. Telescopic legs with both pull pin and

Only

$254.89

36” sign kick release levers can be released by hand or foot for fast setup. Independently adjustable legs with three height adjustments for uneven terrain makes for ease of use along right of ways and medians. Designed to meet the minimum height requirement as set forth in the MANUAL ON UNIFORM

TRAFFIC CONTROL DEVICES (MUTCD) and NCHRP-350 tested and certified (with roll-up signs), it is as safe as it is functional.

48” Sign $299.99


Fire Hydrant Equipment 51

Hydrant Markers

Our hydrant markers are a great way to find your hydrants. The markers are 60” and have reflective material for easy nighttime location. They are available as a top mount marker or a spud mount marker. Choose from markers with springs or without. The durable fiberglass rods are weather and vandal resistant.

If you have a need for large quantities, call us for special pricing. We quote special prices for quantities of 100 or more.

Side Mount with Spring Side Mount No Spring Top Mount with Spring

FHM25N FHMNS

FHM60

$14.75

$16.95

$19.95

MINIFLAG

$5.79 each

60 “ side mounted on the hydrant

2 1/2” spud with a spring for easy displacement if need to open the hydrant.

Hydrant Marker Flags

60 “ side mounted on the hydrant

2 1/2” spud without a spring.

Also available for the steamer connection

The Mini Flag™ is designed to be retrofitted onto hydrant markers. The 4" high x 5" wide Mini Flag™ is white PVC exterior grade UV ray resistant material, with red reflective striping.

The Mini Flag™ can be color coded for any hydrant type identification purpose (i.e. water pressure, etc.) or you can use your own label.

Available in Red, White/silver, yellow, green, blue reflective striping

60 “ top mounted on the hydrant bonnet with a spring for easy displacement if need to open the hydrant for a more permanent type mount.

Patriot Markers

American Patriot

Hydrant Markers are a great way to show your patriotic pride in your community.

Pricing will depend on the model of hydrant marker you need.

see our website for details or call us for more information

H

Y

D

R

A

N

T

Hydrant Mount STORZ

Hydra-Storz is a quick-connecting hydrant system that lets you hook up without removing caps, unjamming chains or worrying about cross threading. Access id restricted to only authorized personnel. The connector is made of forged aluminum with rugged stainless steel butterfly vanes.

This configuration makes Hydra-Storz connectors tamper resistant, reduces maintenance costs and is perfect for mutual aid without reducing water flow. Hydra-Storz connectors can be installed quickly and easily.

$216.95

$227.95

- 4” Storz

- 5” Storz

Please remember to specify your hydrant size 4” or 4 1.2” and your STORZ connection size, 4” or 5”. This connection is the fastest way to connect to a hydrant.

STORZ Snap Cap

Protect your Storz connections with Hydra-Snap Cap. These lightweight, inexpensive, highlyvisible plastic caps keep mud, road grime, ice and snow off the

Storz lugs.

$34.99

- 4” Storz

$41.49

- 5” Storz

Out of Service Marker

$7.79 each

This color-coded "Out of Service" marker allows fire departments to easily and discreetly mark fire hydrants that are in need of service.

This marker uses the Port Mount

Hydraview™ which allows the unit to be totally removed for service or emergencies.


O

R

I

E

S

A

C

C

E

S

S

B

O

O

K

S

52

Books For Firefighting

ISDN #

1401835821 Basic Essentials of Firefighting

BOOK TITLE

0763744956 Engine company fireground operations

1401835759 Essentials of Firefighting and Emergency Response, 2E

0766813444 Firefighting Strategies and Tactics

0766804070 General Aviation Firefighting for Structural Firefighters

0766819051 Hydraulics for Firefighting

0766854523 Introduction to Fire Pump Operations, 2E

0827377320 Principles of Fire Behavior

0766801470 Wildland Firefighting Practices

0763744964 Ladder Company Fireground Operations, Third Edition

0766801470 Wildland Firefighting Practices

0763751685 Structural Firefighting: Strategy and Tactics, Second Edition

Books For Officers

ISDN # BOOK TITLE

0763751693 Management in the Fire Service, Fourth Edition

0763733814 A Leadership Guide for Combination Fire Departments

0763729353 Chief Fire Officer’s Desk Reference

1401826059 Company Officer Second Edition

0763742112 Cooperative Service Through Consolidations, Mergers, and Contracts

1401899226 Fire Officer Exam Prep

0763722472 Fire Officer: Principles and Practice

PRICE

$62.99

$52.89

$78.25

$34.79

$52.99

$24.25

$41.25

978076375617 Fire Service Leadership: Theories and Practices $25.25

0763731897 Fire and Emergency Services Administration: Management and Leadership $47.99

0766808688 Going For The Gold

0766803627 Incident Safety Officer

0763744018 Management in the Fire Service, Third Edition

$46.25

$37.25

$62.99

Books For Special Operations

PRICE

$44.49

$52.99

$63.25

$63.95

$43.75

$50.99

$50.99

$73.65

$52.75

$52.99

$52.75

$62.99

Books For The Service

ISDN #

0827385595 Confined Space Rescue

0766801977 Practical Rope Rescue Systems

1401895034 R.I.T. Company Operations

0763737291 Trench Rescue

BOOK TITLE

0763740098 Trench Rescue DVD

1890306649 Trench Rescue Operational Field Guide

0763742066 Trench Rescue: Awareness, Operations, Technician, Second Edition

Books For Special Operations

PRICE

$46.25

$46.95

$42.89

$41.99

$251.99

$16.99

$41.99

ISDN #

1401880894 Haz Mat Chemistry

BOOK TITLE

076373408X Fire Fighter's Handbook of Hazardous Materials, Seventh Edition

0763742058 Hazardous Materials: Awareness and Operations DVD Series

0827378297 Emergency Medical Response to Hazardous Materials Incidents

0766807274 HazMat Air Monitoring & Detection Devices

1401878210 Explosives Identification Guide

1401857582 Hazard Materials Incidents

0766806936 Decontamination for Hazardous Materials Emergencies

0766801551 Hazardous Materials Field Guide

Books For Exam Prep

ISDN #

1401899234 Firefighter I & II Exam Prep

1401899226 Fire Officer Exam Prep

BOOK TITLE

0763728462 Exam Prep: Fire Department Safety Officer

0763744654 Exam Prep: Fire Officer III & IV

0763742171 Exam Prep: Technical Rescue–High Angle

0763728535 Exam Prep: Hazardous Materials Awareness and Operations

076372906X Exam Prep: Technical Rescue–Structural Collapse and Confined Space

076373764X Exam Prep: Airport Fire Fighter

PRICE

$45.95

$44.79

$1,049.99

$73.69

$36.45

$17.79

$50.99

$16.99

$34.79

PRICE

$24.25

$24.25

$33.59

$33.99

$25.25

$25.25

$25.25

$25.25

To see our complete list of publications and their full description, visit our website www.911erp.com


Books For Your Service

53

Books For EMT and Basic Emergency Care

ISDN #

0766820130 EMS Street Strategies

BOOK TITLE PRICE

$31.25

1418033650 Fundamentals of Basic Emergency Care with Workbook and EMT Basic Exam $110.89

0766838994 Principles of Patient Assessment in EMS $63.99

1401879349 Basic Emergency Care Workbook

0763749133 Essential Medical Terminology, Third Edition

0763740314 First Responder: Your First Response in Emergency Care

1401879330 Fundamentals of Basic Emergency Care

$36.25

$52.99

$52.99

$58.79

0766827577 Functional Anatomy for Emergency Medical Services

1401859240 The Streetmedics's Handbook, 2E

0766819841 Introduction to EMS Systems

1401896898 Basic Life Support Skills DVD

1401879381 WebTutor to Accompany Fundamentals of Basic

1401879373 WebCT to Accompany Fundamentals of Basic Emergency Care

$52.49

$31.95

$40.49

$425.99

$24.25

$24.25

Books For First Aid- CPR & AEDs

ISDN #

0763742449

0763742465

0763742252

0763743321

0763744328

BOOK TITLE

First Aid, Fifth Edition

CPR and AED, Fifth Edition

First Aid, CPR and AED, Standard, Fifth Edition

Professional Rescuer CPR, Third Edition

First Aid Guide-100 Pack

Medical Exam Prep


0763742139 EXAM PREP: EMT Basic-IAFC

0763744662 EMT Basic Review for National Certification

0763718300 EMT Intermediate Review for National Certification

0763742147 EXAM PREP: Medical First Responder-IAFC

0763742163 EXAM PREP: Paramedic

1401891527 The EMT Basic Exam Review

Books For Law Enforcement

PRICE

$7.95

$5.95

$8.99

$8.99

$129.99

PRICE

$36.95

$25.99

$26.95

$33.95

$36.95

$29.95

B

O

O

K

S


0763741302 Crime Prevention: The Law Enforcement Officer's Practical Guide

0763747874 Evidence Collection

0763747882 Evidence Collection Field Guide

0763741132 Community Spanish for Law Enforcement Field Guide

0763741108 Responding to Individuals with Mental Illnesses

0763746606 Police Officer's Handbook: An Analytical and Administrative Guide

0763725471 Special Operations Mission Planning Field Guide

0763741094 Preventing Terrorist Suicide Attacks

0763744336 The Complete Guide to Public Safety Cycling, Second Edition

PRICE

$37.79

$37.79

$21.99

$21.99

$35.29

$37.79

$21.99

$35.59

$25.25

0763747211 Criminal Interrogation and Confessions, Fourth Edition $79.75

0763727288 Essentials of the Reid Technique: Criminal Interrogation and Confessions $37.99

0763733911 Gang Investigations: A Street Cop's Guide

0834210606 Drugs in America: Sociology, Economics, and Politics

$42.99

$57.25

0763745529 Force Reporting for Every Cop

0763741086 Understanding Organized Crime

$36.25

$65.49


B

A

D

G

E

S

54

1

Choose your badge style

2

Choose your finish

Badges & Credentials Custom Badges

Custom Badges in about 3 weeks.

Customize your badge in 6 easy steps.

Choose from our extensive line of badges from Smith & Warren

3

Choose your what you want your badge to say

&

I

A

L

S

C

R

E

D

T

A

4

Choose your lettering style

F

B

G

ROMAN

C

H I

D

STANDARD

5

Choose your center seal.

E

J

6

Choose your backing

You can choose from these popular center seals or you can choose one from our complete catalogue on line. You can also have a seal custom made.

Contact us for details.

Screw Back Safety Pin Wallet Clip

All State Seals are available.

To see you state, visit our website

S528

1 3/4” X 3”

Nickel Rhod Gold Cote 2 Tone Ray

$44.00 $49.00 $54.00 $96.00 $82.00 $78.00

S155

2 1/4” X 3 1/8”


$44.00 $49.00 $54.00 $96.00 $82.00 $78.00

S536A

2 1/4” X 3 1/4”


$72.50

$80.00 $86.00 $128.00

$112.50 $109.00

S158

2 3/8” X 2 7/8”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

S503

2 7/8” X 2 1/4”


$72.50 $80.00 $60.00 $102.00 $89.50 $81.00

S511R

2 3/8” X 2 7/8”


$84.00 $91.00 $95.00 $136.00 $117.00 $113.00


F139

2 1/8” X 2”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

Badges & Credentials

55

F141 2 1/8” X 2 1/8”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

F140

2” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

B

A

D

G

E

S

&

F144

1 3/4” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

F147

1 3/4”” X 1 3/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

M214

2 1/4” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

I

A

L

S

C

R

E

D

T

M217

2 1/8” X 2 1/8”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

E117

2” X 2 1/4”


$44.00 $49.00 $54.00 $96.00 $82.00 $78.00

F143 2 1/8” X 2 1/8”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

M11 2” X 2 1/4”


$44.00 $49.00 $54.00 $96.00 $82.00 $78.00

S153 2 1/2” X 2 7/8”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

S206C

2 1/4” X 2 1/4”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00


56

B

A

D

G

E

S

&

S266

2 1/8” X 2”


$51.50 $56.00 $62.00 $104.00 $91.50 $82.00

I

A

L

S

C

R

E

D

T

S243A

2 5/8” X 2 1/2”


$55.50 $61.00 $64.00 $106.00 $96.00 $87.00


Custom Badges

S261 2 1/8” X 2 1/8”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

F140 2” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

S259

2 1/2”” X 2 3/4”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

S81


$51.50 $56.00 $62.00 $104.00 $91.50 $82.00

2

M263

2 1/4” X 3 1/4”


$55.50 $61.00 $64.00 $106.00 $96.00 $87.00

S536

2 3/8” X 3 3/8”


$72.50 $80.00 $86.00 $128.00 $112.50 $109.00

F139 2 5/8” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

S87D 2 1/2” X 1 3/4”


$72.50 $80.00 $86.00 $128.00 $112.50 $109.00

S525

2 1/4” X 3 1/4”


$72.50 $80.00 $86.00 $128.00 $112.50 $109.00

M180 1 1/2” X 2 1/2”


$44.00 $49.00 $54.00 $96.00

$82.00 $78.00


M216

2 1/2” X 2 1/4”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00


S135 2 1/2” X 2 3/8”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

S125

3 1/8” X 2 1/8”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

S126 3 1/8” X 2 1/8”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

57

S124

3 1/8” X 2 3/8”

B

A

D

G

E

S


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

&

S152

2 5/8” X 2 1/4”


$49.50 $54.50 $60.00 $102.00 $89.50 $81.00

I

A

L

S

C

R

E

D

T

S101

2 3/4” X 2 1/8”


$40.00 $48.50 $51.50 $93.50 $80.50 $71.50

S102 2 3/4” X 2 1/8”


$40.00 $48.50 $51.50 $93.50 $80.50 $71.50

M182E 1 3/4” X 1 3/4”


$44.00 $49.00 $54.00 $96.00 $82.00 $78.00

S232 2 1/2” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

S238 2 1/2” X 2 1/4”


$42.00 $49.00 $53.50 $96.00 $81.00 $75.00

E451 2” X 1 3/4”


$40.00 $48.50 $51.50 $93.50 $80.50 $71.50


B

A

D

G

E

S

NP101

NP100

58

3/8” X 2 1/4”

NP102

1/2” X 2 3/8”

5/8” X 2 1/2”

All Tags $9.50 each

Available in

Nickel, Rhodium or Gold

Clutch Back Clamps

&

NP105 Available for NP100 & NP101


NP103

NP104

Custom Nameplates

1” X 3”

3/4” X 3”

I

A

L

S

C

R

E

D

T

C511B

C558

C512

3/8” X 2”

C511A

9/16” X 2 1/2”

E2052

5/8” X 2 5/8”

All Tags Available in Nickel, Rhodium or Gold

Clutch Back Clamps or Safety Pin Style

Specialty Name Plates

Nameplate allows your rank and name

Nickel Rhod Gold Cote

$15.00 $17.00 $18.00 $42.00

9/16” X 2 1/2”

C554

3/8” X 2 1/2”


$17.00 $19.00 $20.00 $44.00

C511

C558A

9/16” X 2 1/2”

3/8” X 2 1/2”

1/2” X 2 1/2”


$12.00 $14.00 $15.00 $23.50

You can choose any of our 1/2” centers to add to this nameplate. Choose your rank or affiliation. See the complete listing on our website

Hanger Bars

C603

C600A

3/4” X 3”

You can choose any of our

1/2” or 5/8” centers to add to this nameplate. Choose your rank or affiliation. See our complete listing on our website

C600B


$17.00 $19.00 $20.00 $44.00

C600A and C600B fits C554,

C558 and C558A

For C603 and C604 request

Hanger Bar C600AL

“YEARS OF SERVICE” in place of

“Serving Since” use C600C for all.


$12.00 $14.00 $15.00 $23.50

C600

One Piece Hanger Bar and Nameplate

C602


$12.00 $14.00 $15.00 $23.50

1 3/16” X 3”


$23.00 $26.00 $27.50 $36.00


C121S

C116S

3/4 “ Shirt Collar Accessories

C122S

C113T

C119S C118S

C107T C108T C115S

Collar Brass

Shirt Collar Accessories Sold In Pairs

59

C548

E515

C542

C536 C546 C534 C523

C532

C544A C542A E514 C544

All are $7.50 per pair

Except C532-$9.50

1” Collar Accessories Sold In Pairs

B

A

D

G

E

S

&

C188T

C182T

E512

C186T

C180T M873A

Nickel Rhod Gold

$10.50 $12.50 $13.50

Stars

C100XT

C517S

C176T

C518S

C519S

C174T

C520S

C100T

C521S

C552

C540

All are $7.50 per pair

Except C530-$9.50

C550 C538 C522

C530

Sgt Accessories Sold In Pairs

C705 C705A C705B

$7.50 per pair

I

A

L

S

C

R

E

D

T

$10.50 per pair

C705BE

C519F

E524 C517F

C518F

All Stars are $8.50 each

Medical Collar Brass

C520F

E520 $17.00

C705E C705AE

$17.50 per pair

E510 $7.50

E513 $7.50

E511 $7.50

E509 $7.50

E527

M1908V

E526 E525

Maltese Pins

Can be used as collar brass or sleeve pins

M1908P M1908VFC M1908VFCMEM M1908LA

M1905 $8.50

M998CO $8.50

M1906 $6.50

M1907 $6.50

M1913C

Custom Collar Insignias

3

4

Letters Nickel Rhod Gold

1 $5.99

$6.29

$6.49

2 $6.99

$8.10

$8.29

$7.59

$8.69

$8.89

$8.29

$9.39

$9.59

If more than 4 letters/numbers are needed, contact us for pricing

F14

Nickel

$26.50

M1913A

Nickel

$26.50

F16

Nickel

$9.00

Rhod

$29.50

M1913B

Rhod

$11.00

M1913

F114

Rhod

$29.50

M1918

Gold

$12.00

Gold

$30.50

AC10

Gold

$30.50

M1901

Nickel Rhod Gold

$26.50 $29.50 $30.50

B

A

D

G

E

S

C102

&

I

A

L

S

C

R

E

D

T

C117

C106

C873L

60

C103

C110

C105

C256L

Lapel and Hat Insignias

C104

C113A

C107

C111

C109

C108

C192L C101

C113

C108A

C138PL

M814

C121L C122L C119L C118L C116L

C115L2 C114 C112 M846 M873AL

All Hat and Lapel Insignias are $16.00 for Rhodium and $17.50 for Gold

All have a screw backing. Sold Individually.

Remember to order two pieces for a lapel set.


C123

Lapel & Hat Insignias & Tie Clips

All Hat and Lapel Insignias are $19.00 for Rhodium and $20.00 for Gold

All have a screw backing. Sold Individually. Remember to order two pieces for a lapel set.

61

C123 C124 C121XL C122XL

C119XL C118XL C116XL C115XL C100XL

Tie Clips - Tie Tacks - Specialty Pins

C505 Silver-$17.00 Gold-$18.00

C509 Silver-$17.00 Gold-$18.00

Specialty Pins

Nickel: $26.50 Rhodium: $29.50 Gold: $30.50

C606 Silver-$19.00 Gold-$20.00

C510 Silver-$15.00 Gold-$16.00

M593 M594 M595 M596 M597 M598

C508 Silver-$17.00 Gold-$18.00

AC2P Silver-$19.00 Gold-$20.00

M599 M600 M601 M602 M603 M604

E4001 Silver-$17.00 Gold-$18.00

C509A Silver-$17.00 Gold-$18.00

M605 M606

C511T Silver-$19.00 Gold-$20.00

C510L Silver-$15.00 Gold-$16.00

M612 M613

AC2T $16.00

C605A Silver-$17.00 Gold-$18.00

C605 Silver-$19.00 Gold-$20.00

M607

M614

M608

F18

M610 M611

F18E M615

AC3F $10.50

Any state seal or other stock seal is available with this item.

B

A

D

G

E

S

&

I

A

L

S

C

R

E

D

T

AC14 Silver-$15.00 Gold-$16.00

AC13 Silver-$15.00 Gold-$16.00

ERSGTB Silver-$16.00 Gold-$17.50

ER396 C617

Other available titles

Commissioner

Correction Officer

Dept. of Corrections

Deputy Sheriff

Police

Security

Sheriff

Sheriff’s

Available in Red or Blue/Silver or Gold

Asst. Chief

Auxiliary Police

Chief

Constable

Corrections

Dept. of Corrections

Deputy sheriff

Dispatcher

Highway Patrol

Investigator

Justice of the Peace

Police

Police Reserve

Sheriff

Sheriff Department

Sheriff’s Department

Sheriff’s Office

State Trooper

$6.50

$7.50


I

A

L

S

C

R

E

D

T

B

A

D

G

E

S

&

BO400 $10.99

BO5845 $10.99

Badge/ID Holders and Wallets

BO4050

Badge/ID Holders With Neck Chain

BO450 $13.49

BO5982

$6.99

Double ID holder

Badge Holders

These unique holders allows the user to carry and display a badge on one side and an ID on the other. It’s the perfect solution for anyone who must have both an

ID and badge quickly available at all times.Recessed cutout or pin-in holders available.

ID holder on back

ID holder on back Badge only $4.99

Badge cutout & velcro closure for shirt or belt

BO5888 BO5889 BO700

Badge/ID Holders With Clip On

BO5840 BO600 BO5893 Top grain leather badge holders that clip on the belt with a strong steel spring clip. Available for generic pin-ins or a custom recess. Circles are for star badges and ovals are for shields.

Oval holder with pin-in

$10.99

3 3/4” round holder with pin-in

$10.99

Oval holder with recessed badge cut out

$14.99

Oval holder with pin-in snap closure

$7.99

Round holder with recessed badge cut out, swivel and velcro closure

$14.99

Horizontal ID holder

$10.99

Wallet and Badge Case

Custom, recessed and generic cases are made of quality leather and crafted with pride. The custom cut-outs shown here are only a sample of the unlimited number available. 2-1/2 oz. leather badge cases and wallets are soft and luxurious in feel and appearance. The turned edges and lined billfold compartment add an additional touch of quality. 4 oz. leather badges, cases and wallets have the same quality and durability but are made with a thicker leather which some officers prefer.

BO100 $10.99

BO150

BO200 BO250

Book style badge case

Standard - $14.99

Soft - $18.99

BO375

Book style wallet

Standard - $18.99

Soft - $21.99

Billfold badge case

Standard - $14.99

Soft - $18.99

BO5819WF

Billfold badge case with wallet

Standard - $18.99

Soft - $21.99

BO5817

BO122

Tri-fold badge wallet with credit card slots, soft leather

Soft - $29.49

BO575

ID case w/ two windows, 3” x 4-1/2” with outside badge flap

Standard - $11.99 Soft - $12.99

BO110 BO5960

Badge / ID tri-fold case with snap closure,

3-1/4” x 4-1/4” folded size

Standard - $13.99

BO175

Standard - $15.99

Soft - $19.99

Soft - $23.99

Standard - $14.99

Soft - $18.99

Standard - $8.99

Badge Style Ordering

Soft - $26.99

We have custom fit styles for your badge. Contact our customer service, email or fax your exact badge. If you know your exact style, let us know, if not, photo copy or scan your badge and email it to us at [email protected] or fax it to us at 877-572-7793 after you receive your order confirmation . Include your order number on the message.

Duty Belts & Accessories

63

Duty Belts

2 1/4" wide, Rugged duty belts. Fully lined 10-12 ounce, drum dyed full grain English

Bridle leather Solid brass buckle available in 3 finishes. All belts have solid brass snaps.All Sam Browne buckles are solid brass and are standard in a chrome finish. Black or Gold finishes are available on request. The leather is available in black plain, Clarino, or basketweave finishes. 24in waist to 46in . Add 10% more for up to 54” Call for larger

2 1/4" Fully Lined Sam Browne Belt

6500-1 Plain $41.99

6500-2 Clarino $48.99

6500-3 Weave $43.99

Belt Keepers

5456-3 5456-1 5458-1 3/4” wide Belt Keepers

5456-1 Plain (set of 4) $8.99

5456-2 Clarino (set of 4) $11.99

6570-3 Weave (set of 4) $9.99

2 1/4" Sam Browne FR2 Stealth Belt

6502-1 Plain $47.99

6502-2 Clarino $53.25

6502-3 Weave $51.99

Choose Gold or Silver Buttons

5458 Velcro closure series add $4.00 to each set

5492-3 5492-1 5493-1 1” wide Belt Keepers

5492-1 Plain (set of 4) $12.99

5492-2 Clarino (set of 4) $16.99

5492-3 Weave (set of 4) $14.99

4-Row Stitched 2 1/4" Fully Lined Sam Browne Belt

6504-1 Plain $42.99

6504-2 Clarino $50.25

6504-3 Weave $45.99

2 1/4" Riverside Leather Belt

6570-1 Plain $43.99

6570-2 Clarino $51.49

6570-3 Weave $47.99



5456-3 5456-1 5458-1 1 1/4” wide Belt Keepers

5496-1 Plain (set of 4) $16.99

5496-2 Clarino (set of 4) $19.99

5496-3 Weave (set of 4) $17.99

Basic Cuff Case

Handcuff Holders

Rounded Bottom, XL also fits ASP



Baton Holders

Plain only, slotted back.

$10.99 5416


Quick Release Cuff Case

5514-1 Plain $18.99

5514-2 Clarino $22.99

5514-3 Weave $19.99


5414 Velcro closure series add $1.00 to each

Handcuff Strap

5489-1 Plain $13.99

5489-2 Clarino $17.99

5489-3 Weave $15.99

Baton holder for 16" collapsible with foam handle

5490-1 Plain $12.99

5490-2 Clarino $15.99

5490-3 Weave $14.99

Baton holder for 21" or 26" collapsible with texture grip

5521-1 Plain $8.99

5521-2 Clarino $10.99

5521-3 Weave $9.99


Standard Cuff Case

5517-1 Plain $16.99

5517-2 Clarino $20.99

5517-3 Weave $17.99


Velcro closure add $1.00

Snap back in place of slotted back add $1.00

Key Holders

3/4" Leather Key Loop w/Deluxe Key Snap Choose

Gold, Silver or Black Snap

5457-1 Plain $5.99

5457-2 Clarino $6.99

5457-3 Weave $5.99

Leather Key Loop w/Key

Snap. Choose Gold, Silver or

Black Snap

5449-1 Plain $4.99

5449-2 Clarino $5.99

5449-3 Weave $5.49

5519-1 Plain $6.99

5519-2 Clarino $8.99

5519-3 Weave $7.99


Open Top Cuff Case

5515-1 Plain $15.25

5515-2 Clarino $18.25

5515-3 Weave $16.49

Deluxe Key Holder w/Protective Flap. Choose


5446-1 Plain $8.99

5446-2 Clarino $10.99

5446-3 Weave $9.99

Highride Key Holder w/Belt

Clip. Choose Gold, Silver or

Black Snap

5444-1 Plain $8.99

5444-2 Clarino $10.99

5444-3 Weave $9.99

5546-1 Plain $5.99

5546-2 Clarino $6.99

5546-3 Weave $5.99

5550-1 Plain $4.99

5550-2 Clarino $5.99

5550-3 Weave $5.49

1 1/2" welded steel ring for a baton or C cell light, nested inside a 2" ring for a D cell light

Choose Gold or Silver Button and Ring

1 1/2" welded steel ring

For baton or C cell light

Choose Gold or Silver Button and Black, Gold or Chrome Ring

Ammunition Holders

2 x 2 x 2 Bullet Pouch.

Choose Gold, Silver or Black

Snap

Single Mag Pouch


5637-1 Plain $7.99

5600-1 Plain $13.99

5600-2 Clarino $18.99

5637-2 Clarino $8.99

5637-3 Weave $8.49

5600-3 Weave $16.99

Double Drop Shell Case.


5632-1 Plain $13.99

5632-2 Clarino $16.99

5632-3 Weave $10.25

Double Drop Shell Case.


Double Mag Pouch

Velcro Closure

5600-1 Plain $19.99

5600-2 Clarino $24.99

5600-3 Weave $22.99

5631-1 Plain $9.99

5631-2 Clarino $13.25

5631-3 Weave $10.25

Single Dump Box Gold, Silver or Black Snap

Double Dump Box

Gold, Silver or Black

Snap

5635-1 Plain $11.25

5635-2 Clarino $13.99

5635-3 Weave $12.25

5636-1 Plain $15.99

5636-2 Clarino $18.99

5636-3 Weave $16.99

G

E

A

R

D

U

T

Y


D

U

T

Y

G

E

A

R

64

Duty Belts & Accessories

Chemical Holders

Chemical holder for 2 oz Bodyguard or Freeze with snap closure

Black, Gold or Silver Button

Belt Slot or button snap back

5535-1 Plain $12.25

5535-2 Clarino $15.25

5535-3 Weave $13.25

Chemical holder for 2 oz Bodyguard or Freeze with velcro closure


Flashlight Holders

Closed Top Holder for the Pelican 7060

LED


5576-1 Plain $14.99

5576-2 Clarino $18.99

5576-3 Weave $15.99

Stinger XT (Extra Tall) Flashlight Leather

Holder w/Flap and a Snap Closure


5536-1 Plain $12.99

5536-2 Clarino $15.99

5536-3 Weave $13.99

5560XT-1 Plain $14.99

5560XT-2 Clarino $18.25

5560XT-3 Weave $16.25

Chemical holder for Mark III or Mark VI with snap closure



5527-1 Plain $11.99

5527-2 Clarino $14.99

5527-3 Weave $12.99

Chemical holder for Mark IV with an open top



Pelican M9 Flashlight Leather Loop

Holder


5568-1 Plain $7.99

5568-2 Clarino $9.99

5568-3 Weave $8.99

Strion Flashlight Leather Loop Holder

5525-1 Plain $10.25

5525-2 Clarino $12.99

5525-3 Weave $11.25

5574-1 Plain $5.99

5574-2 Clarino $7.99

5574-3 Weave $6.99

Stinger Flashlight Holder w/Flap and a Snap Closure


5560-1 Plain $14.99

5560-2 Clarino $18.25

5560-3 Weave $16.25

Pelican M6 or Strion Closed Top

Holder


5573-1 Plain $10.99

5573-2 Clarino $12.99

5573-3 Weave $11.99

Pelican M9 Flashlight Leather Open

Top Holder

5567-1 Plain $12.99

5567-2 Clarino $15.99

5567-3 Weave $13.99

Guardian Hi-Ride Duty Holster for

S&W

For Smith & Wesson "K" frame, "L" frame with fixed sights, and large frame revolvers

Level I retention holster

Rides high for comfort & security

Steel reinforced thumb-break

Recessed hardware prevents scratching

Top grain leather. Full suede lining protects finish. Rear sight protected by suede lining. Retains shape and strength for years

Black, Gold, Chrome snap choice.

5026-1

5026-2

Plain

Clarino

$39.49

$48.49

Almost all of our leather products have a choice of 3 finishes. choose from Plain,

Plain

3-Slot Pancake Hugger Holster

Multi-slotted for fit and comfort

Allows for forward tilt or vertical draw

Universal weapon fit

Adjustable safety strap for security

Fits both right and left hand

Top grain leather

5115-1 Plain $21.49

5115-2 Clarino $26.99

Leather Finishes

Clarino or Basketweave

Clarino Basketweave

Holsters

Enforcer Hugger Holsters

Slim, open muzzle design for low profile

Rides high and secure for perfect concealment

Contour Fit ,Steel reinforced thumb-break for strength, Hammer back, Top grain leather, Plain finish only.

5101-1 1911-Style .45 Automatics

Black, Gold, Chrome snap

$17.49

choice.

5103-1 Sig Sauer P-225 and 226, both 9MM and .45

$17.49

5102-1 Smith & Wesson Models 39, 59, 469, 659 $17.49

Enforcer Hugger Pancake Holsters

Fully covered duty and off-duty holster

Front & rear side flaps hold holster snug against body. Multi-slot back for duty or off duty belts. Ideal for all plain clothes assignments. Fully covered trigger housing. Front & rear sights completely covered and protected. Steel reinforced thumb-break for strength. Covered magazine release. Full suede lining. Top grain leather. Black, Gold, Chrome snap choice.

5120-1 Sig Sauer P-225 and 226, Beretta 92F, Smith & Wesson 639 and 659-Plain

5120-2 Sig Sauer P-225 and 226, Beretta 92F, Smith & Wesson 639 and 659-Clarino

5121-1 Smith & Wesson 4-Digit Automatics-Plain

5121-2 Smith & Wesson 4-Digit Automatics-Clarino

5122-1 Colt 45 1911 Government-Style-Plain

5122-2 Colt 45 1911 Government-Style-Clarino

$39.99

$49.00

$39.99

$49.00

$39.99

$49.00

Springer Holsters

Easily concealable duty or off-duty holster . Unique style fits most revolvers. High-strength, adjustable steel spring clamp retains a tight grip on weapon. Removable safety strap.

Can be worn on belts up to 2 1/4" wide. Top grain leather

Black, Gold, Chrome snap choice.

5002-1 2" Snub Nose Revolver-Plain

5002-2 2" Snub Nose Revolver-Clarino

$30.99

$37.99

5003-1 2-1/2" Snub Nose and 2" Magnum Revolver-Plain $39.99

5003-2 2-1/2" Snub Nose and 2" Magnum Revolver-Clarino

5004-1 4" Small and Medium Frame Revolvers-Plain

5004-2 4" Small and Medium Frame Revolvers-Clarino

$30.99

$30.99

$37.99

5005-1 4" Large Frame Revolvers and 1911-Style .45 Automatics-Plain $30.99

5005-2 4" Large Frame Revolvers and 1911-Style .45 Automatics-Clarino $37.99


Radio Cases and Accessories

Radio Cases

Leather cases for all of your radios. Specify your make and model.

We have a case for you. Available with belt loop, belt clip, swivel attachment or “D” rings for radio strap. Choose for a Motorola, Tait,

ICOM, M/A-Com, Kenwood, Uniden, Midland,Standard,

Yasesu/Vertex, Maxon, Tekk, Johnson, King, Relm, Ritron,

KyodoWest and Bearcat/Unidenn scanners.

Most

Case

$35.00

Area 51 Radio Cases

Area 51 cases are light weight formable tough nylon. It was designed for the military but you get the benefits.

Styles available for most radio cases.Made

tough for your use.Available with “D” rings, belt loop, swivel mount.

Most

Case

$19.99

Universal Radio Case fits all types and sizes of radios. Manufactured from heavy webbing and is resilient to weather. A built in is a snap belt loop fits all belts 2.5" wide or less. Also included is the adjustable quick release strap for carrying across your body.. Your radio will always remain secured with an elastic choke cord that snaps in over the radio.

$18.99

GFURCS

65

This Deluxe Radio Holder is 5 inches tall with a 1 1/2 inch wide leather strap, lined with velcro for adjustable closure.

The leather covered steel backwall provides a base for the radio to sit on. The elastic strap holds the radio securely around the lower portion. Two safety pullthe-dot snaps allow easy attachment to

$22.99

BO5487RC your duty belt.

Multi-Adjustable Holder adjusts for height, width and depth of the radio. It has two elastic cords that go over the top and attach to the body. Also available with swivel attachment.

Bo5610

BO5610S

Multi Adjust Holder

Multi Adjust Holder with Swivel

$18.99

$22.99

Add $4.00 for Clarino

Add $2.00 for Weave(shown)

Swivels

Belt Clip swivel for button type male attachments.

Other options are available such as Belt loop attachment. Choose from swivel sets, button only or teardrop shape mounts.

See our website for complete

Shoulder Mic Holders

Mic straps fasten through the epaulet of a shirt or jacket so the mic remains in a convenient speaking position. The

7 1/2” straps are perfect for shirt epaulets and the 9” holders are for outerwear. All straps are made with heavy yet flexible garment leather sewn with heavyweight nylon thread and solid brass snaps in your choice of finish.

BO5467

BO5469

BO5470

7 1/2” w/snap, slot & velcro $4.99

7 1/2” w/snap & slot

9” mic strap & slot

$3.99

$3.99

Leather Radio Straps

This radio strap has a leather mic loop, positive locking buckle, mates to a radio holder with rust free scissor snaps. Radio holder is sold separately. 1

1/4" wide heavy duty leather 1/2". You can also

UNISTRAP Universal Strap

BO6543R Reflective Strap

FDNYSTRAP FDNY Style Strap

$27.00

$27.99

$27.99

choose our style with reflective material for extra safety. Also available is the

FDNY style with the button clip mic holder. Remember to specify.

Anti-Swap Straps

$6.99

BO5425

$5.99

GFMRC

Keep your radio case from swaying around with one of our radio stabalizing straps. You can choose from a leather or a reflective nylon strap.

Chest Radio Pack

$39.99

AWZZ3055

This heavy duty universal radio chest pack comes with a place for your radio, a pen holder and secured pouch.

This is an excellent system when working in harsh environments and if you need easy access to your radio.

The pouch gives you a place to store other items. Works with all types of radios.

G

E

A

R

D

U

T

Y

G

E

A

R

D

U

T

Y

66

Minitor Pager & Cell Phone Cases

Minitor Pager Radio Cases

Available in Leather or Cordura Nylon, these cases are sure to protect your pager from damage. Comes with belt clip as standard, or options are available. These will fit any style Minitor pager. The snap makes for your easy remove of the pager.

MN5C30BL Nylon Cordura Case $12.99

MN5330 Leather Case $20.99

Cell Phone Cases

We have a case for almost any cell phone including Blackberry. Case available in Black, camouflage, orange, yellow, burgundy, navy, tan hardwood camouflage and green camouflage. you can have a standard belt clip, swivel belt clip or swivel belt loop. Cases start as low as $13.99.


Real job apparel

Work Shirts 67

Off Duty Firefighter's Workshirt Defender Firefighter's Work Shirt

G8000

100% Ribbed cotton. Get a

Sure-Fit with a generous cut, allowing for shrinkage after washing. Self-material collar.

Plastic zip-thru collar.

Zippered right chest pocket.

Taped seams and collar.

Webbing over shoulders. Knit cuffs and waistband. Machine washable.

Sizes Sm-5X and TXL-T3X

SM-XL $36.99

2X-3X $42.99

4X-5X $47..99

Tall Sizes $43.99

Responder Firefighter's Zip Turtleneck

20oz Linear (12oz. square yard*) 80% cotton/20% polyester superweight fleece. Get a Sure-Fit, with a generous cut, to account for shrinkage after washing.

10" Brass Zip turtleneck.

Set-in sleeves. Knit cuffs

G8025T and bottom band. Side seam pockets. 9" right chest radio pocket.

Imported. *The weight of the fleece can be measured by the linear yard or by the square yard. We purchase our fleece on a 20oz. linear yard. When it is

SM-XL $29.99

converted to a square, it translates to 12oz.

We offer a superior superweight fleece gar-

2X-3X $34.99

4X-5X $39.99


ment, which has made us the leader in the industry for over 15 years. Sizes Sm-5X and TXL-T3X

G8020D

20oz linear (12oz. square yard*) 80% cotton/20% polyester superweight fleece. Get a Sure-Fit, with generous cut, to account for shrinkage after washing. Set-in sleeves. Knit cuffs and bottom band. Cotton, anti-curling denim collar and elbow patches. 7" brass zipper. 9" right chest radio pocket. Imported *The weight of the fleece can be measured by the linear yard or by the square yard. We purchase our fleece on a 20oz. linear yard. When it is converted to a square, it translates to 12oz. We offer a superior superweight fleece garment, which has made us the SM-XL $29.99

leader in the 2X-3X $34.99

industry for over 15 years. 4X-5X $39.99

Sizes Sm-5X and TL-T3X Tall Sizes $36.99

G810

Firefighter's Workshirt

20oz. Linear (12oz square yard) 95% cotton/5% polyester superweight fleece.

Set-in sleeves. Knit cuffs and bottom band. Cotton, anticurling denim collar and elbow patches. 7" brass zipper. 9" right chest radio pocket.

Also available in Youth sizes.

Colors: Black, Grey,

Green, Navy, Maroon, Red, Royal Blue

Sizes Sm-5X

J

O

B

A

P

P

A

R

Firefighter's Workshirt / Reflective Stripes

E

G820R

SM-XL $39.99

2X-3X $44.99

4X-5X $47.99


L 20oz. Linear (12oz Square)

95% cotton/5% polyester superweight fleece. Ser-in sleeves. 1"

3M Lime Green reflective tape on both sleeves. Knit cuffs and bottom band. Cotton, anti-curling denim collar and elbow patches. 7" brass zipper. 9" right chest radio pocket Made in

USA.

Sizes Sm-5X

SM-XL $44.99

2X-3X $50.99

4X-5X $54.99


Lightweight Firefighter's Workshirt

G830

9oz. 95% cotton/5% polyester lightweight fleece. Set-in sleeves. Knit cuffs and bottom band. Cotton, anticurling denim collar and elbow patches. D-ring on side seam. 7" brass zipper. 9" right chest radio pocket. D-ring on side seam

SM-XL $29.99

2X-3X $34.99

Imported.

Sizes Sm-5X

4X-5X $39.99


See Page XX for custom embroidery options for all of your apparel


G850P

68

Workshirt with Front Pouch

20oz. Linear (12oz square)

95% cotton/5% polyester superweight fleece. Set-in sleeves. Knit cuffs and bottom band. Cotton, anti-curling denim collar and elbow patches. 7" brass zipper. 9" right chest radio pocket

Sizes Sm-5X

Work Shirts

Real Job Wear

Firefighter's Zip Turtleneck

G870

20oz. Linear (12oz square) 95% cotton/5% polyester superweight fleece.

10" Brass Zip turtleneck. Set-in sleeves. Knit cuffs and bottom band.

Side seam pockets. 9" right chest radio pocket.

SM-XL $39.99

Choose Navy, Black

2X-3X $44.99

or Grey

4X-5X $47.99

Sizes Sm-5X and

TL-T3X in Navy Only


SM-XL $39.99

2X-3X $44.99

4X-5X $47.99

A

R

E

L

A

P

P

J

O

B

The Patriot Open Bottom Work Shirt

20oz linear (12oz Square) 95/5 cotton/Polyester superweight fleece

Brass zip-up Turtleneck Set-in

Sleeves/Hemmed cuff 9" right chest radio pocket No denim on this product

Sizes Sm-5X and TXL-T3X(navy only)

SM-XL $39.99

2X-3X $44.99

4X-5X $47.99


Available in Navy or Black

G8270

The Advisor

G529

Ultra soft non-pill GAME-

Tex polyester fleece with

Taslan nylon accents.

Unlined. Mid-hip length.

Open bottom hem with adjustable bungee drawstring. Black or Navy contrasting zippers. cuffs and bottom binding. Machine washable. Imported. In-Zip feature provides easy access for left chest embroidery.

Sizes Sm-3X

Choose: Blue/Black, Green/Black, Maroon/Black,

Yellow/Black, Red/Black, Black/Black, Grey/Black,

Navy/Navy

SM-XL $36.99

2X-3X $41.99

See Page 69 for custom embroidery options for all of your apparel

Firefighter's Workshirt No Denim

G811

20 Linear (12oz square) 95% cotton/5% polyester superweight fleece.

Set-in sleeves. Knit cuffs, and bottom band. 7" brass zipper. 9" right chest radio pocket. Self material Laydown collar.Sizes Sm-4X

SM-XL $37.99

2X-3X $43.99

4X $47.99

Finest Vest

Wind resistant nylon tafetta shell. 5oz poly-fill lining with thermal knit backing. 100% polyester rib knit collar. Full front metal zipper. Two outer pockets. Machine washable.

Choose Navy or Black

Sizes Sm-5X

SM-XL $24.99

2X-3X $29.99

G1222

Bravest Jacket

G1221

Wind resistant nylon tafetta shell. 5oz poly-fill lining with thermal knit backing. 100% polyester rib knit collar, cuffs and bottom band (Back Only)

Full front metal zipper. Two outer pockets. Machine washable. Choose

SM-XL $33.99

Navy or Black

2X-3X $39.99

Sizes Sm-5X

4X-5X $44.99


Real Job Wear

Embroidery Designs 69

Complete your job apparel with one of our stock embroidery designs. Personalize your order by adding you name or company/department to your shirt, jacket or bag. Have questions? Call us. We’ll be glad to help you.

Stock Designs only $6.99 each

CF0022 CF0095 CF0139 CF0144 CF0182 EQ0022

EQ0020

Have your name or company added to your apparel .

Only $3.99

per line up to

15 character spaces per line.

Choose from

Block or

Script style lettering.

This can be added to any embroidable garment.

EQ0026

EQ0071

Available in Silver

EQ0113

EQ1131

EQ0073

EQ0115

EQ0118 EQ0157

EQ0049

EQ0080

EQ0114

EQ0158

EQ0065

EQ0081

EQ0116

EQ0159

EQ0023

EQ0160

EQ0117

EQ01287

J

O

B

A

R

E

L

A

P

P

EQ0288 EQ0298 EQ0159 EQ0359 EQ0516 FR0082

BD0050 CF0018 CF0023 CF0102 CF0003

G

L

O

V

E

S

70

SOFT SHELL DUTY GLOVE

FF520 Abrasion resistant face that is also wind resistant and has

Teflon water repellency.

Features polyurethane palm and trigger finger for added dexterity. Oversized velcro backtab for adjustable snug fit.Available in XS--XL

$12.99

-XXL $14.99

Multi-Use/Duty Gloves

LONG WEARING DUTY GLOVE

FF510 Long wearing

Clarino palm with double layer fingertips and grip.

Textured

Spandex and

Neoprene back for highly breathable, contoured fit. Double sewn Canvas grip patches at all palm wear points. Terry cloth sweat wipe on thumb backs.

Adjustable velcro closure for snug fit.

Available in XS--XL $11.99

-XXL $13.99

Gloves for Your Job

UNLINED-ALL DUTY

FF2101

Our most popular glove for allweather use!

The full

Neoprene back repels the elements while the synthetic leather palm provides excellent grip and feel.

Suregrip reinforced non-slip patches are on the palm, middle, ring and little finger for maximum grip. Velcro closure maintains snug fit.Available in XS--XL $13.99

-XXL $15.99

NEXSTAR I LIGHTWEIGHT GLOVE

Light, cool and breathable for year-round use

·Diverse style

DMX10 useful for multiple applications

/ tasks.

Lightweight nylon/Lycra blend

(Spandura)·Clarino synthetic palm·Nonslip grip reinforced palms and finger tips

·Adjustable wrist closure·Washable


NEXSTAR I LIGHTWEIGHT GLOVE WITH “POLICE” or “SHERRIFF”

Light, cool and breathable for yearround use

·Diverse style useful for multiple applications / tasks. Lightweight nylon/Lycra blend

(Spandura)·Clarino synthetic palm·Non-slip grip reinforced palms and finger tips.·Adjustable

DMX10RP wrist closure·Washable

Reflective Identification “POLICE” or “SHERRIFF” Day or night identification.·Will not wear or deteriorate like silkscreened logo versions Available in XS--XXL $17.99

DMX10RS

SHEEPSKIN LEATHER PATROL

FF400 Premium

Sheepskin

Leather Patrol

Glove. Features full digital grip palm, velcro strap for an adjustable fit and a Thinsulate™ lining for warmth.


-XXL $27.99

"2 IN 1" COWHIDE

Soft, supple cowhide.

Removable knit liner with elastic at wrist. Lock outseam stitched with nylon thread.

Available in

XS--XXL $24.99

XXXL- $26.99

FF712

FLEECY PILE LINING

FF2101 Soft, supple, long wearing cowhide lined with toasty warm fleecy pile lining.

Adjustable velcro strap to keep out the cold. Lock outseam stitched with nylon thread.


Cut Resistance Gloves

SLASH RESISTANT COWHIDE

Supple drum dyed garment cowhide enhanced with

Spectra® slash resistant lining* makes this glove a popular choice for law enforcement.

Spectra® material offers twice the protection of Kevlar. Elastic at the wrist.


-XXL $33.99

FF3104X

EXCALIBUR SLASH RESISTANT

FF3232 Incredibly versatile all duty glove. Features breathable pathogen resistant insert and a

Kevlar® slash resistant/moisture wicking lining, enhanced leather palm, full movement spandex mesh back.


-XXL $36.99

LEATHER GLOVES W/HIPORA

Vanguard leather

Gloves w/Hipora liners The

Hipora® membrane which is both waterproof

DVG800 and breathable and is a guardian from blood and body fluids.·Smooth premium quality aniline finished cowhide.·Thin black nylon tricot outer liner bonded to foam ·Wrist length elasticized cuff ·Meets OSHA Standard for blood borne protection

Available in XS--XXL $29.99


The Right Gloves Driving Gloves

71

DRIVING GLOVES DRIVING GLOVE FULL FINGER DRIVING GLOVE 1/2 FINGER

FF619V Driving Glove.

Soft, supple cowhide with inverted seams for finger dexterity. Sewn with nylon thread.

Adjustable velcro closure on back.


Leather Driving

Gloves : full finger. Smooth premium quality aniline finished cowhide. Open

D22 knuckles and ventilation holes. Adjustable strap with embossed logo available in XS -XXL $15.99

Motorcycle and Bike Gloves

PREMIUM MOTORCYCLE GAUNTLET

Premium cowhide leather and

DM660

Cordura for maximum durability. Contoured design at knuckles for hand flexibility. Hipora

Windproof/waterproof/breathable inserts.

Reinforced palms. Raised padded knuckles for additional protection from debris.

Adjustable closures. C100 Thinsulate lining with Hollofill and soft brushed lining for extra warmth. Available in XS--XXL

$33.99

BIKE PATROL GLOVES

These

Bike

Patrol

Gloves are 1/2 finger with

Lycra

DC290 backs and Clarino synthetic leather palms. They include foam padding in palms to reduce shock / vibration. They also include terry cloth thumbs.

These are washable available in

XS--XXL $10.99

D22S Leather

Driving Gloves

: 1/2 finger.

Smooth premium quality aniline finished cowhide. Open knuckles and ventilation holes. Adjustable strap with embossed logo

Available in XS-XXL $9.99

Tactical Gloves

TACTICAL HARD KNUCKLE GLOVE

Tactical Glove for

Rappelling ,Tactical

Entry and Disturbance

Control. Leather

Covered Ergonomic

Hard Knuckles and a

Reinforced Padded

Palm for Superior Power

FF3317 and Protection


E

S


Shooting Gloves

SHOOTERS CHOICE w/Thinsulate

Soft, supple long wearing cowhide,

Thinsulate™ lined with elastic at wrist. Inverted seams for finger dexterity and longer

FF7318 wear. Sewn with nylon thread. Velcro tab on back. Stitching on palm for firmer grip.

Available in

XS--XL $22.99

-XXL $24.99

SHOOTERS CHOICE

DVG800

Vanguard leather

Gloves w/Hipora liners

The Hipora® membrane which is both waterproof and breathable and is a guardian from blood and body fluids.

·Smooth premium quality aniline finished cowhide.·Thin black nylon tricot outer liner bonded to foam ·Wrist length elasticized cuff ·Meets OSHA Standard for blood borne protection



G

L

O

V

Soft, supple, long wearing unlined cowhide with elastic at wrist, inverted seams for finger dexterity and longer wear.

FF7214

Sewn with nylon thread. Velcro tab on back. Stitching on palm for firmer grip.

Available in

XS--XL $20.99

-XXL $22.99

DVG800

Vanguard leather

Gloves w/Hipora liners

The Hipora® membrane which is both waterproof and breathable and is a guardian from blood and body fluids.

·Smooth premium quality aniline finished cowhide.·Thin black nylon tricot outer liner bonded to foam ·Wrist length elasticized cuff ·Meets OSHA Standard for blood borne protection


72

Traffic Safety Gloves

Gloves for Your Job

Hi Viz Traffic Control Glove Super Duty Hi Vis Traffic Glove 4 Way Stretch Hi Vis Glove

Versatile traffic glove features a yellow nylon shell with a 3M

G

Scotchlite™

L

O

V

E

FF470 overlay on palm and back for hivisibility.

The waterproof insert and Thinsulate™ insulation keeps hands toasty and dry! Available in XS--XL $12.99

-XXL $14.99

S

24/7 Reflective Traffic Gloves

"24/7" Reflective gloves : 1/2 finger

Black stretch Lycra fabric shell can be worn as a stand-alone glove or over other gloves

Palm-side features red reflective Reflexite triangle. Back-side features lime/yellow reflective directional markers for traffic direction.

Visible from 200-600 feet (60-183 meters).

Washable

Size range: sm/md or lg/xlg (two sizes only)

$14 .99

FF475 Water repellent shell with water proof insert.

Lofted

Thinsulate™ insulation and

Neoprene cuff for complete cold weather protection. 3M Scotch Hi-Vis overlay on palm and back. Full suregrip polyurethane palm. Adjustable nylon strap for customized fit.


-XXL $17.99

FF480 Great form fitting gloves with

Spandex contoured fit. A 3M

Scotchlite overlay on the palm and back provides high visibility. Also features a highly breathable abrasion resistant face with teflon water repellency.Available in XS--XL $12.99

-

XXL $15.99

Ultra-Viz Neoprene Traffic Gloves

Unlined High Visibility Neoprene gloves.

Fluorescent Orange breathable

Neoprene backs

Grey Clarino synthetic leather palms

All-weather durability including wet

DNSLT conditions

Adjustable Velcro wrist closure

Washable. Available in XS--XXL $18.99

Knit Traffic Gloves with Reflective Stitching

Knit traffic gloves with reflective stitch

DNSOT

DNG66

Lime/yellow fluorescent or fluorescent

Orange poly stretch knit with reflective strips around entire gloves

We have the

Traffic Safety Gloves

You Need!

Extended elasticized cuff

Washable

Sold in pairs

U.S. Made

One size fits all -XXL $9.75

Fleecy Lined Traffic Gloves

Knit traffic gloves which keep the hands warm and comfortable during cold days in the field. Fleecy pile liner keeps your hands warm while wicking away the perspiration. Extended knit cuff reaches beyond the wrist. FF176 White

Available in M-L $12.99

FF376 Lime

FF576 Orange

DTL

Knit Traffic Mittens

Knit traffic mittens which keep the hands warm and conformable during cold days in the field. Fleecy pile liner keeps your hands warm while wicking away the perspiration. Extended knit cuff reaches beyond the wrist.

Available in M-L $12.99

FF276 White

FF476 Lime

FF676 Orange

DTO

Waterproof Taslon Gloves with RubberTec Grip

FF465 Black

FF455 Orange

FF460 Lime

Nylon waterproof all duty gloves. A durable 100% nylon shell and waterproof insert keeps hands dry.

Thinsulate™ lining keeps hands toasty. The Rubertec palm and fingers enhance gripping. Available in

XS-S-M-L-XL-XXL $12.99

The Right Gloves for Your Job Postal Gloves

73

Convertible Fleece Mitten Glove

FF930 Windblock

Fleece shell is wind resistant and has Teflon water repellency. Thinsulate™ lining in body and hood for warmth on demand. Canvas grip palm for added grip. Available in XS-S-M-L-XL$12.99

XXL $14.99

Neoprene Thinsulate Lined with Grip

FF2130TP For Extra

Warmth!

The full

Neoprene back repels the elements while the synthetic leather palm provides excellent grip and feel.

Suregrip reinforced non-slip patches are on the palm, thumb, index and middle finger for maximum grip. Velcro closure maintains snug fit. Plus a 40 gram

Thinsulate® lining. the insulation keeps your hands warm and allows a great grip in all conditions.

Available in XS-XL$12.99

XXL $14.99

Low Cost Postal Knit Work Glove Full Fingered Knit Work Glove

FF933

Low cost skin tight knit 70% wool. 30% nylon.

Fingerless.

Seamless and light weight.

Ideal for mail sorting and handling.

One size fits all $12.99

FF935

Skin tight acrylic knit.

Positive grip with non-slip rubberized dots on palm.

Seamless and light weight. Ideal for mail sorting and handling.

Available in S-M-L $6.99

G

L

O

V

1/2 Fingered Knit Work Glove

FF934

Skin tight knit 70% wool. 30% nylon.

Fingerless with

Positive grip nonslip rubberized dots on palm. Seamless and light weight. Ideal for mail sorting and handling. Available in M-L $6.99

E

Postal Suede Gloves Deerskin

S

FF3043T The best value postal glove now comes complete with nonslip tips, perfect for mail handling and sorting. Suede deerskin supple enough to sort mail. Thinsulate® lining.

Inverted seams. Elastic at wrist. Available in XS-S-M-L-XL$23.99

XXL $23.99

D911

Extrication Gloves

Safety Work Gloves

Premium Work Gloves

Split Cow Hide

Leather palm and canvas glove with wing thumb

Fluorescent orange and lime backing with silver reflective laminate striping.

Available in S--XL $6.99

DM660

Driver’s Work Gloves

Pig skin palm

Driver's glove with keystone lime thumb

Orange fluorescent, orange polyester back with lime high gloss reflective stripe. Available in S--XL $6.99

R1100

Uniform Parade/Dress Gloves

Heavy-duty Extrication gloves / yellow

Reinforced index fingers and thumbs

Extreme abrasion and puncture resistant dynamic material throughout knuckle and palm areas

DuPont Kevlar yarn for maximum durability and punishment

High visibility yellow fabric backs

Reflective thread and padded knuckles

Fortified thumbs

Washable synthetic leather palms and fingers. Anatomically designed palms pads


White Cotton with Snaps White Cotton with Snaps

FF120 FF130

These White Cotton parade gloves include PVC dots for better gripping when it is needed. It also includes a vent cuff. Available in M-XL

$16.99

per Dozen

Sold in Dozens only.

Available in Black

Our White Cotton parade gloves include a snap to hold you glove in place.

Available in S-XL

$16.99

per Dozen

Sold in Dozens only.

G

L

O

V

E

S

74

Specialty Gloves Gloves for Your Job

ESKA Leather Firefighting Gloves

ESKAG

The new ESKA Firefighting Glove is constructed of high quality leather with Kevlar reinforcements. They meet the requirements of NFPA 1971, Standards on Protective

Ensembles for Structural Fire Fighting and Proximity Fire Fighting, 2007 Edition.

The inner lining of the ESKA glove is constructed with a Crosstech membrane to protect against bloodborne pathogens. This membrane is built-in from finger tip to the end of the shell and is waterproof. It provides active-breathing and optimum heat and cold protection. This lining is 100% permanently attached by means of an ESKA patented process. The special composition of Kevlar lining enhances the glove with

ESKAW permanent and natural anti-odor, anti-static, and thermodynamic properties.

The specially treated leather is waterproof, non-flammable, non-shrinking and oil and acid resistant. A wide heat pad and retro-reflective flame-resistant 3M Scotchlite trim are added for high visibility.

* ERGONOMIC PATTERN: The glove features the same "resting position" as the hand (i.e. slightly bent-vaulted)

* THREE-DIMENSIONAL CONSTRUCTION: The pattern is constructed of four parts, making it 3-D, just like the human hand.

(most gloves are made as two parts).

Extensive reinforcement for greater durability. Also ideally suited for technical applications. Anti-Slip and wear-resistant palm reinforcement made of soft silicone-carbon coated Kevlar..

Available in Med- XXL $124.99 each pair

ESKA Fabric Firefighting Gloves

The NEW ESKA "Fabric" firefighting glove is a lightweight, fire resistant Kermel material that does not retain water and dries faster than leather.

The ESKA gloves will not harden or shrink after being exposed to water, direct flame or chemicals.

Kevlar/Silver blend liner provides heat and cut protection and is also anti-odor, anti-fungal, anti-static and thermo dynamic.

ESKAFG

CROSSTECH membrane blocks bloodborne pathogens, fluids, chemicals and water.

3-dimensional glove pattern follows the natural curve of your hand to provide greater dexterity, fingertip tacticity and overall comfort.Available in Med- XXL $124.99 each pair

ESKAFW

Chiba Gloves

Flamex Fighter Gloves

CB61203- long wrist CB61207- short wrist

The Flamex

Fighters’ advancements in design, materials and capabilities include:

Waterproof and

Blood Borne

Pathogen proof yet breathable barrier that carries through to the gloves gauntlet, providing an overlapping interface for a complete ensemble.Kevlar® palms impregnated with silicon and antistatic Nomex® outer shell. Extrication and Fire-Rescue multi-purpose gloves. Fourchette finger style with pre-curved construction for improved dexterity and tactile feel. Gel padding for ulnar nerve protection. 100% interlocked Kevlar® liner. Machine washable and dryable. Because of dramatically increased dexterity, durability, and many other innovations, Chiba Gloves is in a position to set a new standard for structural Firefighting gloves. Available in

XS- XXXL $110.95

Extrication Gloves BBP & WP

Laser

Waterproof/Bloodborne Pathogen

Proof Extrication

Gloves

This glove is cut resistant and has a stretchable tophand material for

CB62137 a comfortable fit, while providing excellent dexterity and protective level 3 cut resistance.

The Laser glove is also Waterproof and Bloodborne pathogen proof to keep your hands dry in wet conditions and protect first responders from biological contaminents.Special Kevlar enhancements:,Thumb Area, Knuckles, Finger Tips

Nerve Palm protection for Carpal Tunnel & Ulnar

Nerve.

EURO-Tex Waterproof & Blood-borne pathogen proof Liquid barrier Available in XS- XXXL

$54.95


The Right Gloves for Your Job

MF300

75

Diamond Grip Gloves

As

Low as

$8.85

per box

For the benchmark in strength and durability for latex gloves, look no further than DiamondGrip™ gloves. Diamond Grip™ gloves are thicker than typical latex gloves for enhanced protection,and also provide the greatest protection where you need it – at the fingertips – to prevent ripping and tearing.

Diamond Grip™ gloves give you the best in durability and strength across the board.

Sizes- XS-XL 100 count

$11.75 per box or case pack of 10 for $88.50. That’s just $8.85 per box

Ultrasense EC Gloves

MFUSE880

As

Low as

$10.49

per box

UltraComfort… Ultra-soft, next generation nitrile formulation provides the relaxed fit and feel that you would expect from a latex glove.

UltraDurable… High quality nitrile offers reliable barrier protection against many hazardous and infectious substances.

UltraGrip… Unique manufacturing process delivers an outstanding grip in wet and dry environments.

UltraValue… The comfort of latex in an affordable nitrile glove provides

Meets NFPA Standards

the superior value you have been searching for in a synthetic glove.

Sizes- XS-XL


Ultra One High Risk Environment Gloves

MFUL315

As

Low as

$9.49

per box

For the highest level of protection and durability in latex examination gloves for high-risk environments, rely on Ultra One® gloves. Strong, durable and comfortable, Ultra One® gloves offer superior defense against many hazards that you come into contact with daily. With an extended cuff for increased protection, the Ultra One® glove is a proven performer. Ultra One® gloves are the best choice in a latex for heavy duty/high-risk environments. Glove meets or exceeds the emergency medical glove requirements of NFPA 1999, Standard on


Protective Clothing for Emergency Medical Operations, 2003 edition.

Sizes- XS-XL


Supreno EC Nitrile Gloves

MFSEC375

As

Low as

$7.85

per box

Supreno®EC is a durable nitrile glove for high-risk applications. Supreno®EC gloves offer all the benefits of a nitrile glove, with the most important being unique and reliable protection against the hazards you work with. Supreno®EC gloves are formulated for enhanced strength and durability while maintaining a comfortable fit. Supreno®EC gloves meet or exceed the emergency medical glove requirements of NFPA 1999, Standard on Protective Clothing for

Emergency Medical Operations, 2003 edition.


Sizes- S-XL


Midknight Black Exam Gloves

Recommended for:

MFMK296

As

When enhanced tactile sensitivity and consistent grip are a must, make MidKnight™ your glove of choice. MidKnight™ gloves offer the superior combination of durability

Low as

$8.92

per box and protection against day-to-day hazards, in a comfortable nitrile glove. The glove of choice for individuals who demand uncompromising quality and protection,

MidKnight™ provides an exceptional balance of performance, comfort and durability. Designed specifically with a distinct color law enforcement / funeral / correctional facilities /automotive industries / industrial safety / laboratory/tattoo that resists stains.BLACK POWDER-FREE NITRILE STANDARD EXAMINATION

GLOVES Recommended for use when: • Day-to-day hazards require the best combination of durability and consistency •Working in environments that demand firm grip and reliability• Precise contact requires enhanced tactile sensitivity.

Sizes- S-XL


E

S

G

L

O

V

76

SAFETY VESTS We Have Your Vest!

When visibility counts, we are you source for Hi-Vis Apparel. See our large line of vests, pants, jackets and hats.

Serving any industry with high quality products.

Not sure of what level of protection you need? See our website for full description of ANSI Classifications.

CLASS 1

S

A

F

E

T

Y

VSA1100

VSA1101

These vests conform to

MUTCD standards. They are made of high quality soft polyester mesh with a contrasting black binding. 1” x

3” hook and loop front closure and 3/4” elastic side straps.

Available in Lime or Orange.

One size fits L-XL.

VSA1300

VSA1301


MUTCD standards. They are made of high quality soft polyester mesh with a contrasting black binding. 1” x 3” hook and loop front closure and 3/4” elastic side straps.

1” reflective stripes


One size fits L-XL.

Only $6.99 each

A

P

P

A

R

E

L

VSA1200

VSA1201


MUTCD standards. They are made of high quality soft polyester mesh with a contrasting black binding.

1” x 3” hook and loop front closure and 3/4” elastic side straps.


Available in Lime or

Orange.

Sizes L-3XL.

VSA1401

VSA1400



2” contrasting reflective stripes


Sizes L-XL.

Only $7.99 each

VSA1500

VSA1501


MUTCD standards. They are made of high quality soft polyester mesh with a contrasting black binding. 1” x

3” hook and loop front closure and 3/4” elastic side straps.

Similar to the 1100 but heavier duty.


Orange.

One size fits L-XL.

VSA1600

VSA1601



1” reflective stripes Similar to the 1200 but heavier duty.


Sizes L-XL.

Only $7.99 each

VSA1700

VSA1700 Lime



2” contrasting reflective stripes


Similar to the 1400 but heavier duty.

Sizes L-XL.

Only $8.99 each


MUTCD standards. They are made of high quality polyester mesh with a contrasting black binding. 1” x 3” hook and loop front closure and

3/4” elastic side straps.

1 1/2” reflective stripes Sizes

L-3XL.

Only $8.99 each

2X-3X add $2.00

RBSV3Y34


We Have It!

SAFETY VESTS

77

CLASS 2

VSHVVM2

VSHVVM2O for Orange

VSC2410 in Orange

VSC2411

Break-a-way vest

This vest is made from Ice-

Cool 100% soft polyester mesh front and back. 5

Point break away velcro closures for the sides, shoulders and front. 2” reflective stripes and it also has an inside pocket


Orange.

Sizes M-5XL

Only $16.25 each

VSC2801


ANSI 107-1999 Class 2 standards. 2” ANSI reflective stripes. the vest is made

VSC2400 from 100% ANSI certified polyester “Ultra Cool” mesh fabric and complete with a full frontal Velcro closure.


Sizes Med -3XL


2X-3X add $2.00

VSC2800

This vest has an Ice-

Cool mesh, a zipper front for the closure, 2 chest pockets, 2 flap pockets with velcro closures and has 2” wide reflective silver stripes.


Orange.

Sizes M-5XL.


2X-3X add $2.00 4X-5X add $4.00

VSC2401

This vest is made from Ice-Cool

100% soft polyester mesh front and back. Non-conductive nylon zipper front closure.

Includes 2” wide silver reflective stripes. Includes 2 large inside pockets.


Sizes M-5XL.


2X-3X add $2.00 4X-5X add $4.00

VSC2820

VSC2501

VSC2500

This vest is made from Ice-Cool

100% soft polyester mesh front and back. 100% New Light weight polyester with 2” reflective stripes. Includes 2 flap pockets and 2 chest pockets and snap front closures.


Sizes M-5XL.


2X-3X add $2.00 4X-5X add $4.00

VSC2821

T

Y

A

P

Made from 100% ANSI certified soft polyester mesh with non-conductive front closure zipper. It also has expandable velcro sides and has 2” wide reflective silver stripes. It also has contrasting binding for

E

L even greater visibility. Includes

2 front chest pockets and 2 large lower pockets with velcro closures.


Sizes M-5XL.

P

A

R

S

A

F

E

VSC2900

Flagger

Vest

VSC2901

This vest 100% polyester

ANSI material mesh, a zipper front for the closure, 1 large inner pocket and has

2” wide reflective silver stripes with 3 1/2” contrasting color stripe. It also has contrasting binding for even greater visibility.

VSC2931

Sizes M-5XL.


2X-3X add $2.00 4X-5X add $4.00

Flagger

Vest

Made from 100% ANSI certified soft polyester mesh with non-conductive front closure zipper. It also has expandable velcro sides and has 2” wide reflective silver stripes over 4” contrasting stripes. It also has contrasting binding for even greater visibility.


Sizes M-5XL.


2X-3X add $2.00 4X-5X add $4.00


78

MS3261LOZ

S

A

F

E

T

Y

VSC3001

A

P

P

A

R

E

L

VSC3000 in Orange

SAFETY VESTS

CLASS 3

These vests conform to ANSI

Class 3 standards. Made from Micro Mesh Material in

Lime Yellow. The vest includes 4.5" striping with

Zipper Closure


Sizes Small - XL

XXL add $2.00

XXXL add $3.00

MS3261LOZ


Class 3 standards. They are made of polyester mesh with a zipper front closure. One left tow tier 3 division pocket and two two lower inner pockets. 2” wide certified PVC reflective stripes on body/sleeves. Includes generous arm holes for comfortable fit.Available in Lime or Orange.

Sizes M-5XL.


4X-5X add $3.00

NY32TP

Job Specific Vests

We Have It!


Class 3 standards. Made from Micro Mesh Material in

Orange. The vest includes

4.5" striping with

Zipper Closure


Sizes Small - XL

XXL add $2.00

XXXL add $3.00


Class 3 standards. They are made of high quality soft polyester mesh.


Available Orange.

Size S-XL.


XXL add $2.00

XXXL add $3.00

These vest are made from PVC mesh with high gloss panels and elastic side straps and velcro closures. They are available in Black, Red , Blue , Royal Blue , Orange , Lime , Green , White.

IDENTIFIERVESTLS

Standard legends include:

“POLICE” “SHERIFF” “SECURITY” “FIRE” "FIRE DEPT" "FIRE POLICE" "PUBLIC WORKS" “SAFETY” "SAFETY OFFICER"

“TRAFFIC” "TRAFFIC CONTROL" "CROSSING GUARD" “HAZ-MAT” “SURVEYOR”

Special legends can be made, minimum order of 20 pieces, and a set up fee. Call for additional information.

Sizes L-2XL $18.99 each 3XL add $1.00

Heavy Duty Custom Vests LPPE-OS

Minimum order of 20 pieces.

Sizes L-XXXL.

This is our custom

Personal Protection Vest. It is made with 100% polyester mesh. Lime with orange contrast. This vest features 4 inch, high contrast striping with zipper closure. Adjustable side straps increase the fit up to

5 additional inches. Also available in Orange, Navy and Black. Custom silk screen lettering is printed on both front and back.

These vest are made for heavy duty use and are available in white, yellow, red, orange. lime, blue and black.

The custom imprint on the back is printed on reflective material and is no extra charge and no minimum order is needed.

These vests also incorporate a break-a-way design for extra safety.

Sizes M-XXL

$40.99 each

GFVESTS

Safety Is Our Business SAFETY CLOTHING

79

Shirts and Jackets

VSAT1901 These shirts meet ANSI/ISEA

107-1999 recommendations for CLass 2 safety garment when worn in combination with reflective suspenders. ANSI specification fabric enhances daytime visibility. these shirts are comfortable, durable and machine washable.


Sizes Med -3XL

VSHVTP These shirts meet ANSI 107-

1999 Class 2. made of 100%

ANSI certified lightweight polyester fabric with wicking barrier for year round comfort. Includes 2” reflective stripes and a chest pocket.


Sizes Small - 5XL

4XL-5XL add $2.00

S

A

F

VSAT1900 E

VSHVTPM These shirts meet ANSI 107-1999

Class 2.

“Super Cool” micro mesh fabric and a “V” neck collar design.

Includes a chest pocket.

Sizes M-4XL.


3X-4X add $2.00

VSHVLSPTY These shirts are perfect for every season. Pulls sweat from the body to keep you dry in summer or when layered in the colder months.

Class 2 certified

Available Orange or Lime.

Size Med-5XL.


5XL add $3.00

T

Y

A

P

VSC3000 in Orange

VSCP2601

VSHVLSPTO for Orange

P

VSFZSSY

VSFZSSO

These Polo style shirts with a color are made from a quick dry breathable fabric.

Includes a left chest pocket and 2” silver reflective stripes


Sizes Small - 4XL

3XL add $2.00

XXXL add $3.00

These Full-Zip Hooded safety sweatshirts are made from

10.58oz 100% spun polyester fleece. Double layered half-moon locker patch. Combines the durability of polyester with the feel and comfort of cotton.


Sizes Med -6 XL

2X-3X add $3.00

4X-5X add $4.00 6Xadd $5.00

VSCWIN5001 These weatherproof windbreakers are made of 300 denier polyester osford with PU coating and

DuPont Teflon. Includes waterproof seams and a polyester mesh lining. Also has a storm front with a heavy duty zipper.

You also get a hidden detachable hood with drawstrings an inside pocket and 2 outside pockets. 2”

VSCWIN5000 in Orange wide reflective stripes.

Available in Lime or Orange. Sizes M-4XL.


3X-4X add $4.00

VSHVCNSSY

VSC3SS4000

VSC3SS4001

VSHVCNSSO

These crew neck safety sweatshirts are made from

10.58oz 100% spun polyester fleece. Double layered halfmoon locker patch.

Combines the durability of polyester with the feel and comfort of cotton.


Sizes Med -6 XL add $1.00 per X for 2-6XL

A

R

E

L

These Class 3 hooded sweatshirts have a detachable hood and a drawstring. Made from

100% ANSI polyester fleece with large hand warmer pockets and a zipper closure. includes


Available Orange.

Size S-4XL.


2X-3X add $3.00 4X add $4.00

VSCPK6001 These weatherproof Parkas are made of 300 denier polyester osford with PU coating and

DuPont Teflon. Includes waterproof seams and a polar fleece lining. Also has a storm front with a heavy duty zipper. You also get a hidden detachable hood with drawstrings an inside pocket and 2 outside pockets.

Zip off sleeves. 2” wide reflective stripes. Available in Lime or Orange. Sizes M-4XL.


3X-4X add $4.00

VSCPK600-in Orange


80

SAFETY CLOTHING

ANSI Pants

Safety Is Our Business

MPOLS MPOL MPO

VSPE4000 $22.99

MPLL

VSPE4201

A

P

P

A

R

E

L waterproof

Ice-Cool Mesh

S

A

F

$23.99

E

T

Y

VSPE4200 in Orange VSPE4000 in Orange

These ANSI pants are available in two-tone stripes, low reflective stripes, split reflective stripes or no stripes. Drawstring waists with Mesh liners. Meets ANSI Class 1 when worn worn alone and Class 2 when worn with a Class 1 vest and meets

Class 3 when worn with a Class 2 vest. Size Med-4XL.

Only $20.99 each 2XL add$2.50 3XL add $3.50 4XL add $4.50

ANSI Shorts

MSLRO

MSLR MSOY MSOR

These ANSI shorts are available in twotone stripes or double reflective stripes.

Drawstring waists with Mesh liners and side pockets. Meets ANSI Class 1 when worn worn alone and Class 2 when worn with a Class 1 vest and meets Class 3 when worn with a Class 2 vest. Size

Small-4XL. Only $19.99 each All sizes

HTOL

HTLO

HTO HTL

Hats

These 6 panel baseball style hats are a great way to enhance your visibility. Choose from

Orange/Lime, Lime/Orange, Orange or just Lime.

All hats are fully adjustable to your needed size.

Great for any type of road work including Fire

Police, Law Enforcement, Crossing guards or

Construction workers. Hats can be imprinted with your special lettering. Contact us for details.


Knit Hats

IHHL

IHHO IHHLR

IHHOR

These warm knit hats are the perfect choice for the colder weather. Increase your visibility with one of our Lime or Orange knit hats. Enhance it even more by choosing one of our hats with reflective diamonds. These hats are great for anyone who is in a traffic situation, such as,

Fire Police, Law Enforcement, Crossing

Guards or Construction workers.,

Only $5.99 each

Only $6.99 each with reflective diamonds

Gloves

Knit gloves in Lime,

White or Orange just

$12.99

per pair

Knit mittens in Lime,


$12.99

per pair

Stretch gloves in Lime,


$8.99

per pair

Knit reflective gloves in

Lime,

White or

Orange just

$9.75

per pair

Choose from our large selection of safety gloves or mittens to meet your needs.

Starting at Only $8.99

per pair

See page XX for full details

You’re in Command!

Command Items

81

Command Kit

The Case Commander™ Command System will allow the I.C. to easily track assignments of personnel and apparatus through the use of the

National Incident Management System. Large or small incidents can be managed with this system. Fill out your Command and General staff only as necessary.

The dry erase surface has space for size-up notes, strategic & tactical planning, assignments, PAR, special hazards, tactical considerations etc..

The I.C. will sketch a layout of the incident then place the magnetic tags representing Apparatus, Officers & Crews onto the board in the positions of their assignments. Then the I.C. can track all fireground Groups and Divisions as well as the Officers leading them.

I

N

A timer clock with an alarm tracks time and facilitates prompt PAR reports.

Included are 50 custom engraved magnetic tags representing your apparatus and officers. These tags are typically engraved with the

Radio designations of all Department Officers, Apparatus as well as common Mutual Aid providers.

Only

C

I

Features:

* Fully N.I.M.S. compliant

* Heavy duty case

* Built in wheels and legs (no separate pieces to store)

* Large Clock with timer and alarm

$1199.00

D

E

* LED light * Large Dry Erase surfaces printed with Incident Command worksheet * 50 Custom Engraved Magnetic Tags

* Dry erase markers and eraser included * Storage area below lower board

N

T

Dashboard Command Kit Flexible Command Board

Most command boards cannot be used in the front of the car, but the Dashboard

Commander™ was designed specifically for this purpose. The dry erase surface has space for size-up notes, strategic planning, assignments, PAR, hazards and a sketch of the scene. A stopwatch clock tracks time.

Included are 38 custom engraved magnetic pieces representing your apparatus and officers. You place these magnets on the board to track the assignments of your teams. Custom formats are also available.

The Dashboard Commander™command board comes with the following:

* 38 custom engraved magnetic tags that represent your apparatus & Officers.

* 4 Dry erase markers (2 Red & 2 Black) and eraser.

* Stopwatch clock to track incident times and PAR.

* Heavy duty nylon carrying bag.

* Dimensions 12" x 18"

Only

$425.00

The Flexible Command

Sheet is used to track your strategy and tactics at an incident. It is also used to record your

Personnel Accountability

Reports, Officer, Crew &

Apparatus assignments.

An area to sketch the scene including sector assignments is also included. The sheet is compatible with Expo 2™ dry erase markers or can be used under a clear acrylic sheet.

The Flexible Command Sheet can be used by itself, simply rolled out on a table or in Command Cabinet units with clear acrylic overlays. The sheet is printed on flexible vinyl and unlike paper command sheets it will not be ruined if it gets wet.

In a Command Cabinet with a drawer just lay the Flexible

Command Sheet in the drawer and cover with the acrylic overlay, then you can use dry erase markers to plan you strategies and tactics using the printed sheet as a guide.

Only

$49.00

Command Flag

Easily identify who is in command at the scene of an incident with our light weight Incident

Command Flags. The rigid flag tube fits over any vehicle antenna. Each flag is made of high visibility orange weather resistant nylon and 3M reflective letters placed on both sides. Large enough to see but compact enough to easily store in your vehicle.

GFICF

Only

$19.99

C

O

M

M

A

N

D


C

O

M

M

A

N

D

I

D

E

N

T

I

N

C

82

Command Items You’re in Command!

Portable Command Boards

Our Command Operations Boards are designed for Fire Departments, Ambulance Commands, Haz-Mat Teams and Law

Enforcement Special Teams. Choose a special bards for your operation, such as, High Rise Fire, MCI’s, Staging Areas

Operations, Rehab Areas, Sector Commands, Rapid Intervention Teams, Entry Teams and more.You can choose from our stock designs or have a custom design made for you. All boards can written on with erasable markers or grease pencils.

You can also have velcro strips included and combine it with our custom tags.

Have your department or organization name added for no extra cost.

ECBFG

ECBHAZMAT

These command boards are 13” wide X 11 1/2” high. Each board can include velcro attachments for ID tags. Boards are constructed of a Thermo Plastic for durability and constant use.

You can choose from these or see our complete line of command boards on our website.

Only $59.99

Command Post Strobe

Be sure to identify your command post with our Green command post strobe. This high powered strobe includes magnetic mounts and 12 volt accessory cord and plug. this light is a quad flash strobe with 3.75

joules of power.

Your in command of an incident, identify yourself readily to incoming units, and other support units coming to your scene.

201ZMQ

$51.49

This SWAT team board is 15 1/2” wide X 11 1/2” high and includes a building layout on the back of the board. Only $84.99

ECBSWAT

Pocket Command

This pocket command board is only 6” wide x 9” high, but is double sided to manage your incidents and track your units. Only $49.99 each

ECBPC

Command Board Tags

LAD 133 SQ 18 ENG 249 SWAT 1

RESCUE 2 AMB 50 BATT 50 ALPA TEAM

Customize your command operations with custom tags. Choose you color and inscription. All tags include velcro backs.

All tags are 2” high X 4” wide and are only $5.99

each. Blanks are also available for $4.99

each.You can also get your tags 1” X 3” for $1.99

each. Contact us for more details.


You’re in Command!

Command Items 83

Command Vest Sets

Our Command Vests sets are designed for your operations. Choose from Fire Command Sets, Triage Sets, Hat

Mat Sets or just if you have vests and just need a case to organize them, we have the set for you.

Fire Command Vest Set

This prepackaged kit of all orange vest, consists of 10 large size vests that are better for fitting over turnout gear and carrying case. The set includes the titles listed below.

Vest take approximately 2 weeks to ship out.

RB0226

$504.99

Haz Mat Command Vest Set



RB0206

$346.99

Vest Titles

# Incident Commander

# Safety Officer

# Operations

# Information Officer

# Accountability

# Rehab

# Staging

# Air Supply

# Water Supply

Triage Vest Set



Vest Titles


# Safety Officer

# Operations

# Information Officer

RB008RD

$44.99

Vest Titles


# Medical

# Operations

# Triage

RB0216

$346.99

# Treatment

# Transportation

# Blank Window

# Staging

# Hazmat

# Rehab

# Blank Window

# Safety Officer

Vest Organizer Carry Bag

Designed to carry eight (8) regular size incident command vests,in the elastic loops. Interior slot pocket allows for a command board up to 14" x 18"

Made of 1000 denier

Cordura® nylon with a 4" x 18" reflective panel on the side.

Case only. Color: Red

Dimensions: 19" x 15" x 5"

You can also choose the 10 vest bag for

$56.99

RB009RD

$56.99

Incident Commander Vest

Incident Commander Cabinets

C

O

M

M

A

N

D

I

D

E

N

T

I

N

C

Our “incident Commander” vests have a velcro front closure and “Incident

Commander on both the front and back. The vest is available in Orange,

White, Blue, Lime or Red.

Includes high gloss panels with elastic side straps.

Sizes from Large to 4XL.

IHKPPV1Y

$23.99 each

See our Vehicle Cabinetry section for our complete line of Incident Command

Cabinetry. If you don’t see a design you want, contact us, we will design one to meet your exact needs.


84

T

O

O

L

S

Tools you need to get the job done.

All Purpose Hooks

Open Ceilings, walls, floors, molding and casing

Rapid removal of wood, lath and plaster, tin ceilings, plasterboard, fiberboard and sheetrock. Features Specially

Tapered Hook-Head Point, Two

Workable Ends, Super Strength

Fiberglass Pole, Stainless Steel

Wear Sleeve.

APH-4

APH-5

APH-6

APH-8

4 ft AP Hook

5ft AP Hook

6ft AP Hook

8ft AP Hook

$75.00

$80.00

$85.00

$100.00

APH-10

APH-12

10ft AP Hook

12ft AP Hook

$150.00

$165.00

“D” Handle “D” Handle opt $15.00

Choice of Knob End, Electrically Non-Conductive, and Celtex Grips. Deduct $5.00 if without celtex grip.

The New York City Fire Department standard hook to exact specifications in every detail.

The most versatile hook used in the fire service today.

New York Roof Hook

One of our most popular hooks!

This tool was developed with the New York City Fire Department research and development division. Our all-purpose head, aircraft steel shaft, chisel end, and celtex grips makes up this unit. The strong chisel end is used as a prying tool for scuttle hatches and roof doors. The short lengths are good for going up fire escapes and scuttles to the roof. The tool is crafted of aircraft steel for lightweight, but strength.

A Ring can be added to chisel end for venting top floor windows from the roof. add an additional $20.00.

RH-3

RH-4

RH-5

RH-6

3ft Roof Hook

4ft Roof Hook

5ft Roof Hook

6ft Roof Hook

$85.00

$95.00

$105.00

$115.00

No roofman should leave the truck without this tool.

RH-8

RH-10

Ring to Chisel

8ft Roof Hook

10 ft Roof Hook welded ring to side of chisel

$125.00

$150.00

$20.00

Dry Wall/Sheetrock Hook

A hook specifically designed for Sheetrock walls removal of all types. Can be used on other materials such as wood, plaster, sheet metal walls and ceilings. An exceptional overhaul hook!

Size Solid White

Ash Wood

1” solid fiberglass

1” fiberglass w/ ash wood core

1 1/4” fiberglass/ash

4 ft

5 ft

6 ft

8 ft

10 ft

12 ft

14 ft

$80.00

$85.00

$90.00

$90.00

$95.00

$100.00

$105.00

$120.00

$120.00

$140.00

$140.00

$150.00

$160.00

$180.00

$80.00

$85.00

$90.00

$105.00

$120.00

$140.00

$150.00

$90.00

$95.00

$100.00

$120.00

$140.00

$160.00

$180.00

Choice of Knob

End, Stainless

Steel Wear

Sleeve, and

Celtex Grips.

D-Handle

Option available for an additional

$15.00

Features:

Larger Contact Point, Conventional Penetration, an Arc Hook, Exceptional Pry Action, Combination Rake and

Hoe.

Handles options : 1” or 1 1/4 inch Fiberglass with a solid white ash wood core, 1” solid fiberglass or solid white ash wood

Combination Hook

Add rings and a carry strap for $30.00

The combination Hook features a Boston Rake on one end and an All

Purpose Hook on the other, connected by a 1” fiberglass pole with

CH36

CH48

36” Pole

48” Pole

$85.00

$105.00

sanded Celtex grip. Need a different head combo, let us know, we can combine almost any 2 heads.

CH72 72” Pole $110.00


Specialty Hooks

85

This hook was developed to find hidden fire in deep seated smoldering fires normally found

TRHK-4 4 ft AT Hook in dumps or dempsey dumpsters. The normal hook just won't pull trash in large quantities.

TRHK-6

TRHK-8

6ft AT Hook

8ft AT Hook

Our trash hook, because of it's two large six inch pointed prongs, will grasp debris in huge

TRHK-10 10ft AT Hook

TRHK-32 10ft AT Hook chunks

TRHK-40 12ft AP Hook

“D” Handle Ram Knob

“D” Handle is standard on this hook, but Choice of Knob End, or Slotted/Gas Shut -off End is available.

Presently in use by the Boston Fire

Department. On the head we have forged the Boston design out of carbon steel joining it to a stainless steel wear sleeve.

BRH-4 4ft Rake Hook $80.00





BRH-12 12 ft Rake Hook $155.00

BRH-14 14 ft Rake Hook $175.00

$95.00

$105.00

$115.00

$145.00

$90.00

$90.00

Slotted End

T

O

O

L

S

D-Handle Option available for an additional

An update of the arrow type hook used by the

Providence Fire Department. Penetration is supreme with its arrow head design. The tapered hook compliments the functional use in opening ceilings, walls, and flooring. The pole end is the same as the Boston

Rake Hook. Perfectly balanced and lightweight, yet super strong.

PPH-4 4 ft Pierce Hook $80.00








The pride of the mid-town (NYC) trucks. Used to open tin ducts, air conditioning systems, and complex metal hoods found in restaurants. Its sharpened edge serves to penetrate tin on the push stroke while the six sharpened teeth on the underside complete the cut on the pull stroke. Can be used conventionally in the removal of lathe and plaster.


EK-4 4 ft Eckert Hook $80.00







It will cut lathe, plaster, and sheetrock faster than any tool on the market today. On its back is ten sharpened cross cutting teeth that can cut on the pull stroke as well as the push stroke.

GBK-4 4 ft Gator Hook $100.00




GBK-10 10ft Gator Hook $150.00





T

O

O

L

S

86

All Purpose Hooks and Specialty Hooks Tools you need!

San Francisco Hook

The hook used by the San Francisco Fire

Department since the turn of the century. We streamlined the design and brought more function to its features. A sharpened edge and penetration point was added to the right angle along with large gripping teeth on the underside. Celtex grips and fiberglass shaft completes this unit. A gas shut-off and directional slot is built into the ram knob.

FH-4 4 ft Frisco Hook $70.00

FH-5 5ft Frisco Hook $80.00

FH-6 6ft Frisco Hook

FH-8 8ft Frisco Hook

$85.00

$100.00

FH-10

FH-12

FH-14

10ft Frisco Hook

12ft Frisco Hook

14ft Frisco Hook

$140.00

$155.00

$170.00

D-Handle Option available for an additional $15.00

Universal Hook

This hook does it all. It can penetrate or pull all types of materials used in the building trades. It features two sharpened blades, one on the top for penetration during thrust and one underneath for slicing on the pull stroke. An arc hook on the back of the top blade is used in place of limited space. A chisel tooth of 1-1/2" right angle blade tooth is sharpened to penetrate loose materials on the chop stroke.

UH-4 4ft Universal Hook




$85.00

$90.00

$95.00

$110.00

UH-10 10ft Universal Hook $145.00



$150.00

Chimney Hook

CH-26

Designed to break up creosote build-up after fire is put out. The

824 is a 3 section fiberglass extension pole with a unique ram head. It extends from 8-ft to 24-ft and is made to fit any straight chimney.

To use this, lower the top 9 ft section to blockage, turn posilock pole 1/4 turn clockwise to lock. If blockage is not felt, lower the second section and repeat first step until blockage is found. The pole will not separate at each section but must be locked in order to push through the blockage. this is shipped by Common Carrier.

T- Hook

Specifically designed for residential roof work. (2)

TH-3 3 ft T-Hook $45.00

sharp teeth at each end of the T-head make pen-

TH-4

TH-5

4 ft T-Hook

5 ft T-Hook

$65.00

$75.00

etration of 90 lbs to 180 lbs roof with little effort.

TH-6

TH-8

6 ft T-Hook

8 ft T-Hook

$85.00

$95.00

A sharpened chisel on

TH-10 1- ft T-Hook $105.00

the handle end adds to the functional make-up of the tool.

Superior prying capabilities when removing roof boards.

Excellent overhaul tool. Exclusive celtex grips.

Outside Vent Hook

Two position-Positive guide sliding channel with lock stop. Sure lock clevis pin with cable attached to the guide nut. Less loss and easy access with this feature. Ball spring release without groping for holes. All stainless steel

It

surface when in closed position with the exception of our sanded

Extends!

celtex safety grips. Fiberglass rod slides in the stainless steel tubing.

OV-810 extends 8 ft - 10ft w/ ram knob

OV-686 extends 6ft - 8’ 6” w/ ram knob

$145.00

$120.00

OV-466 extends 4 ft- ’6’ 6” w/ ram knob $105.00

OVD-810 extends 8 ft - 10’ w/”D” handle $150.00

OVD-686 extends 6 ft - 8’6”w/”D” handle

OVD-466 extends 4ft - 6’6” w/ “D” handle

$130.00

$120.00


Get the job done.

All Purpose Hooks and Specialty Hooks

87

The Hook System

All of this for only $295.00

MHS-19

Captain’s Hook

This system was developed for apparatus with limited space. It consists of an All

Purpose head, a sheetrock head, trash hook head and a national hook head. It also has two sections of handles using stainless steel threaded connectors.The first section is 4 ft combined with a head for a 6ft pole, add the 2 1/2 ft section and you have almost a 9 ft pole. Need a short tool? Use the bottom section and any head

T

O

Griff Hook

O

L

$75.00

CH24

Officers Hook

A new style officers hook, this one is 24" in length and has a chisel end for prying.

Made with a roof hook head and celtex grips, a "baby roof hook".

$95.00

GH-36

36" in length

Chisel on end for Prying

2 welded rings

(top & bottom)

Heavy Duty Carry Sling

A unique tool for Officers,

Nozzlemen, and

Roofmen

S

$60.00

OFH17

A personal hook for the officer. All steel construction.

Stainless steel handle. No slip celtex grip. For venting, examination holes or for use as a probe during primary searches. Will shut off gas with its built in feature. Can be used as a pry bar, chopping axe or ram. Length 17"

Tri-Twister Hooks

Hooligan Hook

A NEW and

INNOVATIVE design with a forward gripping handle. Provides for better hand positioning and less fatigue on the push and pull stroke.

Can be used with any of the below style hooks STYLE 2

STYLE 1

HH-6-APH

HH-6-NY

HH-6-DWHS

HH-6-BG

HH-6-Eckert

HH-6-UH

HH-6-FH

All Purpose Hook

NY Roof Hook

Dry Wall Hook

Gatorback Hook

Eckert Hook

Universal hook

San Francisco Hook

$130.00

$130.00

$130.00

$130.00

$130.00

$130.00

$130.00

This hook was designed by the San Francisco Fire Dept. It is used as a 6ft hook for normal work, but add in a unique feature of heavy threaded stainless steel with a thick wall screw attachment and now your reach is 10', 12' or 14'.

Joined together by . You can join these sections together by simply twisting the top unit to the bottom unit, making the unit ULTRA STRONG, but yet functional. The top unit can be used as a 6' Hook for normal firefighting use. When high ceilings use is needed, the bottom section is attached.

TTH-610 6 ft base w/ 4ft extension

TTH-612 6 ft base w/ 6ft extension

TTH-614 6ft base w/ 8ft extension

$175.00

$175.00

$175.00

Add a “D” handle to any unit for $35.00

Choose any type of tool head

88

Pike Poles-Axes-Sledges Tools you need

New Yorker Style

The Pike Poles are avaialble in 4,6,8,10 and 12 foot lengths.

A Strong, conventional hook for quick and effective removal of ceilings, walls, moldings, door and window frames.

This is the standard pike pole used by the New York City Fire Department.

A new redesign of the pike pole made it lighter, shorter, fluted and streamlined, making it the best of its type.The head is made from malleable iron.

T

O

O

L

S

$150.00

XL-714

Pole Size Item #

4 ft LW4

5ft LW5

6ft

8ft

10ft

LW6

LW8

LW10

12ft LW12

32” D-hnd LW32D

40” D-hnd LW40D

Wood Handle Item #

$50.00

NY4

$55.00

NY5

$60.00

$70.00

$100.00

NY6

NY8

NY10

NY12 $140.00

$65.00

$65.00

National Style Hook

Fiberglass Handle

$60.00

$65.00

$70.00

$95.00

$130.00

“D” Handle add $15.00

Pole Length Item # Fiberglas/Wood

4 ft

5 ft

6 ft

8 ft

10 ft

NHF4

NHF5

NHF6

NHF8

NHF10

Handle

$55.00

$60.00

$65.00

$80.00

$110.00

Item #

NHFG4

Fiberglass Handle

1 1/4”

$75.00

NHFG5 $80.00

NHFG6 $85.00

NHFG8 $95.00

NHFG10 $140.00

This pike pole is used nation wide. It is durable and dependable. The industry standard in the fire service.

It has a malleable iron head.

An excellent choice.

12 ft NHF12 $130.00

32 inches NHF32D $70.00

40 inches NHF40D $70.00

NHFG12 $170.00

NHFG32D $85.00

NHFG40D $85.00

Add D-Handle for an additional$15.00

X-Lock Hook

Flat Head Axe

Extension Hook, posi-lock extension pole.

Closed position is 7-ft and open position is 14-ft. This pole will not separate from the body. Will fit in any tube storage (1-1/2" body diameter) on apparatus.

Can be used as an outside vent hook, high ceiling hook or regular hook and will fit in any elevator.

Lightweight - a workable

5-1/2 lbs.

FA8 8lb head fiberglass handle

FA6 6lb head fiberglass handle

FAH6 6lb head hickory handle

$95.00

$50.00

$45.00

Sledges

Pike Head Axe

FAP8 8lb head fiberglass handle

FAP6 6lb head fiberglass handle

WAP6 6lb head hickory handle

$100.00

$55.00

$50.00

Truckmans Axes 3/4 the size of a regular axe

3lb to 16lb

SHF8 8lb Fiberglass $40.00

$65.00

$55.00

Get it in

Yellow or

Tactical

Black

SHF10 10lb

Fiberglass

SHW10 10lb

Hickory

SHF16 16lb

Fiberglass

SHF3 3lb

Fiberglass

$45.00

$35.00

$60.00

$20.00

TR-28 FHG-28


Get the job done!

IRONS Sets, Mounts and Carry Sets

Irons Sets

89

Halligan Axe Marry Strap

4 Piece Set

8lb Force Axe

K-Tool Kit

30in Pro Bar

Marry Strap

DF-$395.00

3 Piece Set

8lb Force Axe

30in Pro Bar

Marry Strap

DT-$275.00

$10.99

GFHALLMARRY

Halligan Axe Carry Strap

GFHALAX

Halligan Axe Nest

$250.00

FHIN-1

Stainless Steel mount for Flat Head Axe and

Halligan. Can be mounted vertical or horizontal. One locking pin for quick release

Halligan

Available in 12” or 16”

$32.99

Halligan Nest

$165.00

FHPBN1

Includes 30” Halligan,

8lb maul and carry strap

Stainless Steel Mount for any size Halligan. Lock pin included

.

$275.00

FHADZ828

Extinguisher “CAN” Carry Sling

PAC Tool Mounting Brackets

Grip Range from 1/8” to

1 1/2”

The Toolok is molded, using two formula of urethane to provide a long, trouble free life. The base is black, rigid and contains teeth to permit adjusting the tension of the flexible yellow grip lock. It can be mounted vertical or horizontal. Fast locking and easy

Water Can Carrier is manufactured from heavy duty two inch nylon seatbelt webbing. It is adjustable to accommodate all persons. Placed on each side of the carrier is lime/silver 3M Triple Trim to make locating the water can easier.

$37.50 per set

Grip Range from 1/8” to 1 3/4”

$64.95 per set

Grip Range from 1/8” to 1 3/4”

$25.00 per set

Handlelok is an adjustable mounting bracket that provides secure mounting for tools, axes handles, sledge hammers, pike poles etc.

The base is injection molded of

Super Tuff Nylon with strength glass fibers with a stretchlok and secure pins for additional locking strength.

Hooklok is a snap in type mount for securing tools, pike poles and other tools. The bracket is injection molded of super tough nylon with high strength glass fibers.

Strong anodized aluminum with vinyl trim. No moving parts to break.

The extinguisher nevers falls out as conventional type holders.

Choose from Running

Board Mount or

Compartment tilt out mount.

$29.99

GFICAN

Extinguisher “CAN” Truck Mounts

$85.00

EXT-S

$95.00

EXT-C


T

O

O

L

S

90

The Best Halligan Tool

Period!

T

O

O

L

S

The 30” Pro Bar is the most popular

24” Pro

Bar

30” Pro

Bar

36” Pro

Bar

42” Pro

Bar

54” Pro

Bar

$185.00

$195.00

$235.00

$255.00

$285.00

Tools you need to get the job done!

The specifications for this tool are extremely rigid. Its a one piece dropped forged Halligan with the Pro-Bar design.

Many have tried to copy this design....... but all have failed.

There is only one Pro Bar and it is at Emergency Responder

Products

Mini Pro Bars

A smaller version of our Pro Bars. Available in 12”,

16” 20” and also a Mini Pro Kit

12” Lil Pro

$50.00

16” Mini Pro

$70.00

20” Mini Pro

$75.00

Mini Pro Bar Kit

$85.00

MPBK20

Removes Rim Locks, Mortise Locks, Tubular

Locks, Key-in-Knob Locks, Fox Police Brace

Locks, Fox Police Double Locks. Can also be used to Probe during Searches, Vent Windows, make examination holes, serves as a portable

Pry-Bar, and removes Locks on car trunks.

Includes 20” mini Pro Bar, Celtex grip, Kerry Key and shove knive.

Great Officers Tool!

Officers Mini Pro Bars

O-Bar Kit

$89.00

$69.00

OBK16

Steel forged and welded construction with shock absorbing handle grip that holds the Kerry key. This item is very similar to the O-Tool Kit, except that the

O-Bar has a Halligan-like spike on the "A" style lock puller. The

O-Bar "Kit" comes with Celtex

Grips, Kerry key and a shove knife.

Officers Tool Kit

OTK16

This tool meets the specifications of

FDNY for their standard officer's tool.

It's made of high strength steel with the head welded to the shaft. The shaft is covered with a non-slip gripping surface, the shaft end of the tool is formed into a pry bar capable of slipping into tight spaces. The head of the tool has a flat driving surface, with an A-type lock puller machined into the adz of the blade. The complete "thru-the-lock-kit" available with the tool contains the officer's tool, a double ended "key" tool and shove knife. The kit can be stored inside the non-slip grip of the tool's shaft. (17")

Rex Tool

A lock pulling tool, shaped like a "U" with sharp tapered blades that bite into lock cylinders of all shapes and sizes. Extra leverage and original head design provide the mechanical advantage to pull well secured lock cylinders. Opposite chisel end is used to drive rim locks after cylinders are removed.

REXT

$150.00

Get the job done right

Bars and Forcible Entry

Roof Pro Bar

91

Truckman’s Tool

$225.00

FHRPB-30

Farr Bar

This Pro Bar is roofman’s dream. It is equipped with welded rings on either end, and a strap. Just attach a rope to one end and use it to vent the top floor windows of a building from the roof.

16” $65.00

12” $50.00

Available in 12” or 16”

A-type lockpuller that can do it all... gas shut-off, nail puller, hammer, pry-bar, wedge tool, venting tool, pull trim, snap padlocks, make examining holes, pull lath plaster, vent windows, and probe during searches.

T

O

O

L

S

36”-

$250.00

48”-

$275.00

Kelly Tool

A Multi-Purpose Fire

Service Tool also known as the Vulcan Tool or Lund Tool.

$185.00

A new and innovative design of a combination ROOF HOOK and the Fork End of a

PRO-BAR (Halligan). This tool is 36-inches in length and comes with Celtex grip, two(2) welded rings, and reflective shoulder strap.

This tool is a 30” Bar with or without Celtex grips. Similar to the Pro Bar but without the Pike.

MAXX TOOLS

Jonny Bar

$250.00

A new Multi-Purpose

Tool that is extremely effective. Its compact size

(30") and sling allows it to be carried "hands free" and quickly deployed during interior firefighting operations.

Pro-Maxx 24

$325.00

The 14 in 1 FireMaxx and our 24” Pro Bar combined with two rings and reflective shoulder strap giving you the ultimate multi-function tools.

Fire Maxx Tool

"14 in 1" - Features in a one piece Firefighting Tool

$135.00

1 - Axe

2 - Hammer

3 - Spanner Wrench

4 - Windshield Cutter

5 - Rappelling Ring

6 - Gas Shut-Off

7 - Water Shut-Off

8 - Battery Disconnect

9 - Dry Wall Cutter

10 - Forcible Entry

11 - Hinge Remover

12 - Pry Bar

13 - Stortz Latch Opener

14 - Hood Remover

Hammer-Maxx Farr-Maxx

$165.00

Hammermaxx is the standard firemaxx with a hammer head instead of a spanner

Farrmaxx is a Kelly type forcible entry tool with a maul head. Tool is 30” long. Good for short strikes in confined spaces, works great with Pro Bar.

$235.00


92

Forcible Entry

K-Tool Kit

Tools you need to get the job done!

R-Tool Kit

T

O

O

L

S

$180.00

RTK

$129.00

KTK

A tool designed (by a FDNY Fire Lieutenant & licensed locksmith) to pull all types of lock cylinders (rim or mortise) from the various glass type or solid doors.

Kit includes all tools shown and an instruction manual

A tool designed to pull all types of lock cylinders too large of the K-Tool unit, such as locks that extend out from the door and 1-inch round are easily pulled with the R-Tool. This tool comes complete with a premium leather carry pouch and the tools pictured.

There Is No Faster Way To Force A Door Than a Hydra-Ram

Hydra-Ram

Presently used by ...

* New York City FD

* Boston FD

* Washington DC FD

* Los Angelos FD

... and other major cities

Hydra Ram I-$1750.00

Hydra Ram II-$1900.00

The Hydra-Ram is the first and only one piece integrated hydraulic forcible entry tool. No hoses or auxiliary pumps to leak or trip on. Truly a one man operation. Hydraulic fluid is non-flammable, non toxic and non freezing

Kit includes a rubber mallet and carry bag

This unit is a one person operation- it is ideal for

Fire Dept’s, Police Dept’s, Tactical Ops, and

Military Ops. It is currently in use by the FDNY,

NYPD, DEA, FBI, and hundreds of fire, police emergency service units and the military

Hydra Ram I: Weights only 11lbs with 4" max.

thrust opening and 10,000lbs of force. Includes

carrying bag and mallet.

Hydra Ram II: Same as Hydra-Ram I except it

Weights only 13lbs with 6" max thrust opening



Pad Lock Breaker

Also Know as the Duck Bill

Tool

$100.00

FHULB-1

Save the jaws on your bolt cutters by using this tool to open pad locks.

Breaks the strongest padlock when placed in the shackle and struck with a maul or the back of an axe. Especially useful in roll-up doors on taxpayers and/or commercial buildings found in shopping malls. The 18" handle keeps hands safely away from strike zone. Handle is rubberized with celtex grip for shock absorption.

Auto Rescue Kit

This four piece kit includes:

Spring Punch

Trunk Key (Kerry Key)

Seatbelt cutter

Shove Knive

93

Shove Knife Tool

Our shove knife is the fastest , damage free means of opening residential, office interior doors with the key in the knob type locks. It is used extensively in fire towers to slip spring latch locks. The design makes the knife work from either side of the door. If the door opens inward,

$5.00

SK-6

you shove the knife in back of the molding stop and retract the latch.

For doors that open towards you, the knife is slipped in from above or below the latch point, jiggle and pull to retract the latch. A protective

$20.00

FHARK

Hockey Puck Lock Breaker

$85.00

FHHPLB

$8.50

FHSP-1

Simple, fast and safe vehicle window removal.

Press point in a corner of a window until spring releases. Point will break glass and you can quickly gain access into the vehicle. Adjustable spring force for light or heavy loading. double spring loaded barrel with hardened tip.

Slip Lock

T

O

O

L

S

The ultimate hand tool for hockey puck style locks, also known as American Series 2000 locks and Fasco flush locks. You won’t believe its ease of use.

It has a 33” Celtex grip on the handle for ultimate leverage.

Battering Rams

Automobile unlocking tool.

Best for GMC-Body and other GM, Ford

Auto Unlocking Tool

$8.50

FHSL-30

Chrysler products. Can work with older foreign vehicles.

Two-Man Ram

$300.00

FHKAYO

One-Man Ram

$250.00

FHRAM-1

These rams are set for one person or two person. The rams weigh 40lbs and is only 30 inches. Great for close spaces. It has an impact of over 14,000 lb kinetic force for the one person and over 24,000lb for the two person unit. Even short back strokes give you maximum impact. The rams are made from durable long lasting epoxy steel.


94

Keys and Cutters

Bolt Cutters

Tools you need it !

Heavy duty contractor quality bolt cutters for a variety of cutting tasks including locks, chain links, reinforcing rods, bolts, rivets. Sizes are 18", 24", 30", 36"

T

O

O

L

S

FHBC18 18” Bolt Cutter $50.00




Non-Conductive Bolt Cutters

These bolt cutters have solid fiberglass handles. Rated fiberglass at 25,000 volts per inch with added celtex for a no slip grip. HIGH VOLTAGE SHOULD BE LEFT TO YOUR LOCAL

UTILITY COMPANIES.

FHNCBC18 18” Bolt Cutter $90.00




Cable Cutters

Non-Conductive Cable cutters $90.00

The cable or wire rope cutter, standard 28" handle with our celtex grips added for extended grip.

Handle may be shortened upon request. 1-1/4" maximum jaw capacity.

$45.00

FHCC28

Standard

Cutters

Handheld Cutters

The baby cable cutter, 10" long, up to 7/8" diameter capacity. Great for battery terminals and small minor cuts.

$12.00

FHCC10

$190.00

FHEKS12

Elevator Key Sets and Special Elevator Keys

Standard Key Set

Freight Elevator Key

Equipped with 12 keys attached to a 5" jailer ring. Manufactured to conform with the majority of elevator manufacturer access keys. Keys are hard anodized in gold color plate to resist rust

Volt resistant key

Swing door access key

Rib “T” style key

Vandal Proof key

Half moon key large half moon key small

Drop key adjustable

Side exit key

“Z” key round stock

$35.00

FHFEK

This is used for opening freight elevator doors

Pocket Door Elevator Key

$30.00

FHPDEK

This device can open the new Pocket

Elevator Doors with little effort.

Instructions are included.

Pocket Door

Elevator Key Set-

includes pocket door key plus 3

$75.00 addi-

FHPDEKSET tional

This tool opens double “panic” type doors found in schools, theaters stores, etc.

$35.00

FHJH

Hold It Tools

Pad Lock Hold It

Designed to hold a pad lock while it is being cut by a saw. It is like having an 18” extension of your arm $45.00

FHHTPL

Door Hold It

Designed to hold a door by clamping the doorknob with the vise grip as the door is being forced open. It allows the holder to keep control of the door in the event of any emergency or even a backdraft. It is like having a 31” extension of your arm.

$45.00

FHHTD

Extrication Hack Saw

Specialty Tools

95

Garage Door Entry

This tool enables the user to unlock virtually any overhead garage door that utilizes as automatic opener for emergency situations.

The object of this tool is to grab and pull the emergency release rope inside the garage on the automatic opener, while standing outside the garage door - thus unlocking the door. This enables the user to push the door up manually.

$20.00

FHKGET

Assault

Hook

3lb

Grapnel Hooks

$60.00

FHASSAUULT

Special Steel Forged Hooks, Arrow Shaped

Points, (5)

Grappling Hooks welded to a 1" shaft. Made and balanced for throwing to upper levels. An eye is on one end for rope attachment.

Drag

Hook

5lb

Special Steel Forged Hooks,

Arrow Shaped Points, (3)

Grappling Hooks welded to a

1" shaft. Made and balanced for throwing to upper levels.

An eye is on one end for rope attachment.

$80.00

FHDRAG

Barracuda Rescue Saw

T

O

O

L

S

$35.00

FHEHS

Advanced styling, comfort, and design with comfortable grip and knuckle guard, oversized handle, chosen to be used with a work glove. Tension device eliminates the "awkward wing nut style". Frame design permits "flush cutting". No part of the frame extends below the frame of the hacksaw. Two settings of the blade, straight and 55° angle. Storage of blades in the angle of the blade when set in frame allows the fastest cut possible with a manual hacksaw. Especially quick on automobiles frame posts. The best frame deserves the best blade. Each unit is equipped with a top of the line

"Sanflex Bi-Metal Blade".

$145.00

FHBRS28

This tool is great to cut auto windshields, mobile homes, aircraft, trailer roofs, wood, sheet metal, and other building materials. It can also cut and chop ice. This tool features honed 2 angled penetrating points, 10 two sided cross-cutting teeth to cut on both pull and push strokes. Comes with protective plastic point cover.


96

Specialty Tools

Tools you need to get the job done !

T

O

O

L

S

“The Stinger”

ALL STEEL

Crow Bars

Wedge Point

$35.00

FHCBWP51

An all steel battering ram designed for and used by the F.B.I. and

N.Y.P.D. It will not only force doors, but can breach concrete or brick walls. It's design allows one or two man operation. 35 lbs. and 35 inches long.

A must for

$275.00

FHSTING

ADZ Bar

$190.00

FHADZBAR

Pinch Point

$40.00

FHCBPP51

Manhole Cover Hook 36”

$30.00

FHMH36

Use the right tool for the job. If you need to pull manhole covers, use our manhole cover hook, designed for the job.

Rescue Shovel

It

Folds for easy storage

The Adz-Bar is an innovative new tool for all operations from forcible entry, to search and overhaul. This tool is a Pro-Bar

(Halligan) tool, except that an Adz replaces the traditional fork on the end of the bar. The Adz is gently curved and thin enough to penetrate those tight spaces during forcible entry operations.

Available in 31" and 24" models

$20.00

FHCRS

Pumps down to

1/12” of water

The Ultimate Pump

This self primes in only

4” of water. It will pump down to one twelfth of an inch of water.

$420.00

FHGZP

PUMP VOLTS: 115v

AMPERES: 6-amps

HORSE POWER: 0.5

DISCHARGE SIZE: 2inch

MAXIMUM HEAD

(LIFT): 36-feet

MAXIMUM G.P.M.: 50gpm

ELECTRICAL CABLE:

33-feet

WEIGHT: 26 lbs.

WIDTH: 7.1-inches

$98.00

ZT58

Rescue Saw

Replacement Blades

2 Pack- $20.00

This manually operated rescue saw provides rescuers with extrication support. A spare blade is stored inside handle for quick change when it is needed. The end cap provides a gas valve shutoff, opened window breaker. And pry tool.



Hydrant Wrench

$30.00

FHHW1

This hydrant wrench is adjustable and is cadmium plated and also has a Celtex grip for safety

Hydrant Tools

97

Supply Line Tool Pouch

Finally a reliable hydrant pouch that securely attaches to your

2½" to 5" supply line using heavy

$26.95

97011 duty hook and loop fasteners.

Dual pouches carry a hydrant wrench and other tools like a pipe wrench to the hydrant so your firefighter won't have to chase the engine. Also features a convenient carry handle and reflective tape for safety at night. Don't lay a line without it.

(W-20" x H-17")

Ratcheting Hydrant Wrench

$68.95

ZT79

Urethane Hydrant Wrench

$49.00

ZT80

T

O

O

L

S

This 15” heat treated stainless steel hydrant wrench has a ratchet head for easier use on hydrant operations or for those hydrants where barricades or debris prevent you from swinging a standard hydrant wrench all the way around.

Hydrant Connection Mallet

This 2lb mallet has a rubber head attached to a fiberglass handle with a Celtex grip.

$18.00

FHCM2

This is a Heat-treated stainless alloy hydrant wrench that accommodates pentagon stems up to 1-7/8". The

Textured urethane coated oval tubular grip provides optimal leverage control.

$9.00

FHUFS

The all new, compact, adjustable universal wrench with finger grips and engraved no-slip handle. Will fit pin or rocker lug coupling. No sharp protrusions to cut or tear firefighter pockets. Special alloy super strength.

$85.50

RB442RD

A large 14 oz. vinyl bag designed to hold all of the equipment you need for a hydrant operation. The

Velcro® closure on top allows for quick access with your gloves on.

This bag will hold large gated valves, wyes, wrenches, reducers, etc. a high density padded bottom helps to protect equipment.

Measures 24"L x 12"W x 9"H with 2,600 cu. in. of space

.

Want a bigger pack?

Choose our larger version

26” Long X 20” Circumference

Holds your hydrant tool and related items. Attaches to hydrant end of hose and need not be removed when

$23.65

RB440YL charging the line, as the straps are made of heavy elastic and 14 oz. vinyl to take the abuse. Fits up to a 5" hose. 22"L x 16" in circumference.

$27.75

RB441YL


P

M

E

N

T

E

Q

U

I

98

FESH

Equipment you need

Firefighter Escape Survival Hook & Escape System

$39.25

EAH

The FESH Hook has a 4” bite with a throat of 3.72” and is rated in excess of 5000lbs at the arch and 1140lbs at the tip.

“T” and arch designed to prevent rocking and rope pinch.

Sharp tip to pierce and anchor to pipes, window frame studs or any fixed objects. the Escape Anchor Hook can be added to any bail out system or can be carried alone with rope. See our website to watch this in action.

The FESH Hook Bag is a 7” X 7” X 2” Nomex bag, specially designed for the FESH Hook which will allow for quick access to the hook and easy deployment of the rope. The bag can be added to any harness or belt.

$29.99

EAHBAG

Three Point Harness - One size fits all. Made to permanently stay on your bunker pants. Double locking pressure buckle -

4000 lbs.

$61.99

FESHHAR

Go to our website to see a video of this device in use .

www.911erp.com

A 4 Point Harness-Class II, constructed of 6000lb Nylon, includes double locking 4000lb pressure buckle, and a fully adjustable leg strap with pressure adjuster. Bunker pant loops are provided. One size fits all.

$72.79

FESHHAR4

Get the Complete System

You can also get the FESH System in a complete package which includes the Hook,

Nomex Bag, 50’ of Technora 7.5mm Escape

Line, Belay Descender and Carabineer. you can also upgrade to include the 4 point harness

Complete system without harness $191.99

EAH1

Complete system with 4 point harness $257.25

EAH2

Bail Out & Tagline Combo Kit

Compact Bail Out Tagline Bag

What everyone has asked for - a Bail Out / Tagline Kit that does not take up much room

1/2 the size of a normal 35' or 50' 8mm Rope Bag

Available in 25', 35' and 50' sizes! Includes Nomex Bag Kevlar 8mm webbing -

5000 lb rating

Attaches to your SCBA/Belt or sits in your pocket.

Use it to Bail Out with or as a Search Line. NFPA Omega Locking Carabineer included

25 ft of Rope

35 ft of Rope

50 ft of Rope

70 ft of Rope

$69.29

$85.29

$111.00

$124.65

Choice of Red, Blue Orange, Yellow or

Black for your bag color


Equipment you can trust 99

$30.99

FRAME

SCBA Bail Out Kit Carry System

Our SCBA Escape Bag Carry

System attaches to the rear frame of your SCBA. It is designed to hold our Bail Out Kits with 50 feet or less of rope. The large flap is easy to open for quick deployment of your bail out kit. It is made of

Nomex and is available in Red,

Blue, Green Blue and Black.

Partner Tether Pack

$24.99

PST10

The 10' Nomex Shell

Kevlar Partner Security

Tether keeps you attached to your partner while engaged in search and rescue operations. As opposed to staying on top of your partner, the Tether allows you to move more freely while still in arms reach of you partner. Having the opportunity to move more freely speeds up search time, ultimately giving you the ability to cover a larger area. Available in 15, 20 and 25 ft lengths.

Escape Rope Bag

The TFS40 Rope Bag holds up to 50' of

8mm Escape Line. Your attachment point is a heavy duty swivel scissor clip. The bag can also be placed directly in your bunker pants pocket! Made of 1000 Denier

Cordura. Available in Red, Blue, Green

Orange or Black

$15.79 TFS40

Bail Out Kit

Firefighters have used it to bail out of burning E buildings. The idea behind the bag was Q to provide a low profile

U rope deployment system

I that was easy to use and affordable. The

P bag sits in the bunker pants pocket with the

M yellow strap hanging outside the pocket.

E

When you run into a critical situation, reach down and pull the bag out of the pocket. Grab the carabineer,

N which is laced through the snaps in the bag, and pull it until the snaps come undone. Holding the carabineer, throw the bag out the 25 ft rope $55.99

T window. The rope will deploy until there is none left. Find a place to anchor. Either use a descender and a harness to rappel or use the method of

35 ft rope

50 ft rope

100 ft rope

$62.89

$73.79

$111.89

placing the rope around the lower back using your hands as a friction device.

Bags in Red, Black, & Yellow

Weight approx: 25'-1.85 lbs, 35'-2 lbs, 50'-2.25 lbs, 100' 3.75

lbs Bail Out/8mm - 4025 lb. One man rescue ropeOne Alum.

Quick Lock Beener 6700 lb. One Quick Release Oval Beener for SCBA attachment. 24" Chafe guard

Drag-U-Safe

$9.99

DUSSK

A 7' Drag-U-Safe Strap is coiled to fit in a Cordura pouch the size of a deck of cards. The life rated webbing has two handles that allow you to easily pull an injured person or firefighter to safety. Any tool fits through the handles allowing two firefighter's to drag from each side. Universal handcuffs can be created to hoist a victim from a hole or narrow opening.

The Drag-U-Safe Strap Kit attaches to any SCBA Harness or belt for easy and quick access.

Tagline Kit

The Baldwinsville Tag Line has heavy duty snaps which are used as opposed to Velcro. By leaving all snaps closed and securing the carabineer to a fixed point outside a building, the line will not feed unless the Firefighter is moving. You are left with an

BTK-XX

egress route out to your starting point. The bag also conforms to the body so that it does not interfere with tools or hose allowing you to work freely.

Tagline Sizes: 50', 70', 100',140', &

30 ft rope $63.99

200'

50 ft rope $93.89

Bags available in Red, Black, & Yellow

70 ft rope $119.79

Weight approx: 25'-1.85 lbs, 35'-2 lbs,

100 ft rope $157.69

50'-2.25 lbs, 100' 3.75 lbs

Tagline has 6.8mm Kevlar line

200 ft rope $279.99

One Alum. Quick Lock Beener 6700 lb.

One Quick Release Oval Beener for SCBA attachment choose from a standard handle bag style or low profile SCBA belt mount.

$36.49

DUSSKPRO

Drag-U-Safe Pro

Made of heavy duty tubular webbing, built in soft handles, three carabineers. Rated at 2400lbs

Functions: Drag a victim to safety, haul cylinders, short search line, aids in carrying tools, a hose strap. Includes strap to fold up and hold unit together!

P

M

E

N

T

E

Q

U

I

100

FAST/RIT


FAST SLINGK

$16.99

GFSLINKGK

The FAST SLINGK is a multi-purpose tool made of 4200 lb TECH Tape webbing. The yellow loop has a eight foot circumference with the red and blue 4 feet each. Stretched out end to end is 8 feet! Purchase by itself, with a NFPA

Biner and/or Bag.

Fast Harness: The red and blue loops are placed around each leg while the yellow loop is placed around the body and pulled up to the front of the face. The legs and torso are supported to lower a victim to safety.

Drag Strap: the loops stretch out to 8' in length making it ideal as a DRD (Drag

Rescue Device), around the back and under the arms.

Add a

Haul Cylinders: The red and blue loops can be wrapped around cylinder heads while the yellow loop becomes your shoulder strap.

Bag for

Search Tether: A person on each end of the FAST Slink is an ideal tether for large area searches.

only

Door Breach Control: Place a slip knot over any door handle to control the breach

$5.99

of a door. This allows you to stand back preventing injuries from tools and/or flash over.

Include a

Supply Hydrant Strap: Place a slip knot over the end of the supply line and throw the large loop over the hydrant to keep your supply line in place. Also can be used to move hose lines. One end around the end of the hose with the large loop becoming your shoulder strap.

Truck Company Tool: Wrap tools such as saws to be pulled up to roof operations.

MVA Operations: Securing doors and anchor strap for personnel working on hills

Biner for

$23.75

RIT/FAST Staging Mat

Our RIT Staging Mat is 5' X 10'. Included is a 3' X 5" (Green) section that holds 8 cylinders. The balance 5' X 7' area leaves you plenty of

$123.99 GFRITMAT

room for all of your RIT tools. Made of 18 oz. Rip Stop Vinyl.

RIT/FAST Bottle Caps

Bottle Caps are quick to take on and off.

Held on by an internal bungee cord.

Simply place the cap over the top of the cylinder and go!

Made of Nomex with

3M reflective letters. One size fits all.

$55.99

FESHHAR

RIT/FAST Dedicated Nozzle Cover RIT/FAST Identifier Arm Band/SCBA Bottle

Our Dedicated Nozzle

Covers prevents the non

RIT/FAST operations from taking the dedicated line! It is critical that the teams tools be readily available when the team is called. The

RIT/FAST Cover is easily identifiable, "labeled RIT/FAST with

3M Triple Trim" and fit all nozzles!

Available in many colors.

Our new

RIT/FAST/RIC

Identity Bands are made of

6.8oz Nomex with 3M 2" reflective letters and

Triple Trim. They attach using $31.99

a Nomex elastic strap with snaps for easy on and off. The Identity Bands are

GFIB made to withstand heat and abuse! They can be used for cylinder identifiers or arm band identifiers.Many colors and legends available.

RIT/FAST Cylinder Wraps RIT/FAST Cylinder Cover

Our SCBA Cylinder Wraps fit securely over any SCBA yet easily removed when changing cylinders or assignments. Made of heavy 7.5 oz Nomex. They

DO NOT interfere with normal operations of the SCBA. Made to fit all brand and size SCBA's.

Letters can be FAST TEAM also, or can be another name as needed.

Available in Red, Yellow, Black,

Green, Blue or Orange

$36.49 GFSCBAWRAP

SCBA RIT TEAM

Identification Covers make it easy to identify your designated RIT/FAST Team at the scene of a fire. Our cylinder covers do not go on the outside of the harness or cover the valve.

Simply loosen the cylinder clip, place the cover over the cylinder and tighten the clip again. There is no

$29.99

GFSCBACOVER chance to become hung up on any obstructions and you have full access to all of your valve on/off knobs and pressure readings. Fits like a glove! Choose your color.


Equipment you need 101

FAST Bag Extreme

Our FAST Bag Extreme is made of 10.10 Heavy Cotton

Army Duck. Fits any size cylinder. Cylinder is secured with an adjustable strap on the inside of the bag. Includes two 9" x 6" x 2" bellow pockets for tools, hose, and or rope, one

18" x 6" x 2 pocket that can hold 200' of 6.8 mm RIT 900 search line, and two additional pockets up front for hose lines. Above the cylinder is a quick access compartment that accommodates a mask, regulator and or hose for

$132.99

GFFASTBAG quick connections. The FAST Bag can be shoulder carried or pulled along the ground with the front loop. Also included are two carabineer strap loops built into the top of the bag.

Color - Black w/ Lime Triple Trim. the bag is 30” X 12” X 12”.

$132.99

GFFAST

E

Q

U

I

P

RIT/FAST Bag

Made from heavy cotton duck. The Fast Bag Basic holds cylinders up to 23” in circumference. A cinch top closure secures around the valve for easy access to the on and off control. Included are two 7” x 11” side bellows pockets to hold basic tools. The bottom of the bag is reinforced with a webbing drag plate to prevent snags when being

dragged.

Also included is a fully adjustable detachable

M

E

N

T shoulder strap and drag strap to carry or drag the FAST Bag. Contained in the lower portion of the bag is a compartment for a pre-rigged mask and additional hoses which can easily be accessed with the quick rip flap. All access points such as pockets and mask rip flap are identified with 3M reflective trim.

R.A.T. Vinyl Bag

With a trapped rescuer in need of air the R.A.T. Bag will help provide an emergency air cylinder to the trapped rescuer. Constructed of 22 oz. vinyl coated nylon and virtually indestructible tuff bottom, the bag can be dragged or carried to the trapped rescuer. A carabineer is available for attachment.

The air cylinder is held in place with 3 quick-release web straps and can accommodate all sizes of cylinders. Ample room for rope and mask storage and an additional pocket on the top for equipment storage make this bag versatile and easier to handle than a R.I.T. Bag.

Measures 21" L x 9" W x 10"

H.

$113.97

RDAD888

RIT Bag

A versatile RIT bag that can be set up for tools only or as a carrier for supplemental air supplies for RIT operations. Two inside pockets, quick open top, rigid bottom and two straps for securing tools or air cylinder.

Constructed of heavy vinyl with 3M™ Scotchlite™

Reflective Material.

Measures: 12"H x 13"W x 29"L with 4,500 cu.in. of space.

Color: Red. Wt. 130 oz.

$149.97

RDAD887

Available in Regular, Large X-L and XXL

RIT/FAST Team Belt

Starting at

$91.25

Made of 100% Kevlar® for strength and maximum heat resistance, this belt is rated for ladder escape and is fully adjustable up to 10” with the steel side pressure adjuster. The double locking hook makes it easy to dawn and doff. Included is a built in ax loop, hasty harness strap, and utility slots. Additional Belt Ad-On

Options include KLT-Kevlar® Saw/Light Tool Strap,

Carabineer Strap, 10ft Kevlar® Tether, Drag-U-Safe Kit,

24’ Web Pack, and/or a removable 25', 35', 50', or 70’

Bail Out/Search Line Kit. (See Compact Bail Out Kits.)

Ask us about add on accessories available.


E

Q

U

I

P

M

E

N

T

102

Tool Bags

All purpose Tool Bags -

Small and Large. Made of 22 oz. red rip stop vinyl. Includes Velcro and snap closure to keep your tools secure.

Also included is a fully adjustable shoulder strap that is detachable.

Bag is square to easily accommodate space in all rigs.

Available in two sizes:

7” X 7” X 12”$35.99

GFTOOLBAGREG

12” X 12” x 18”$42.99

GFTOOLBAGLARGE

Turn Out Tool Roll

$18.95

FI20121

Tool Bags & Pouches

A universal tool roll that is large enough to carry the tools of the trade, yet small enough to fit in your turnout coat pocket.

Five individual pockets to organize your stuff, a flap to keep it secure, hook and loop fastener to keep it rolled up and a carry handle. (Tools

Shown not included)

Equipment you want

Belt Tool Pouch

Quick Pockets

The Belt Tool Pouch is made of

Heavy Army Cotton Duck. Easy fits on any belt, take up strap, or simply in your pocket. Holds pliers, scissors, punches, tape, and more.

The two inch front flap folds down giving you easy access to tools.

The velcro closure keeps all of your tools in place until ready to use.

$13.99

GFBTP

$14.99

GFQP

Quick Pocket is 10" x 10" and has 6 pockets for tools, webbing, pens, punches, tape and more! The closure is made of Velcro to secure all the items in your Quick Pocket. Fits in any pocket on your gear and is easily assessable by the quick pull handle.

Roll Out Tool Pouch

The Roll Out Tool Pouch laid out is 16" wide x

13" high. There are five pockets in various sizes

6" to 1", ideal for wire cutters, snips, pens, window punches, webbing ect...

Rolled up the Tool Pouch is only 3" X 10". It fits easily into any pocket!

$13.99 GFRO

Webbing and Webbing Pouches

Web Packs

Webbing has been proven to have unlimited uses within the Fire Services!

No more Daisy Chains that take up your whole pocket!

Harnesses, raising and lowering tools, holding doors open, bailing out, taglines - the uses are endless!

Web Pack contains 24' of Life Rated webbing in a sandwich size bag (Bag is Only 1" wide). Easily fits into any pocket for quick access or the swivel hook can be attached to any D-ring. Grab handle allows you to deploy your webbing quickly.

Size Web & Bag Bag Only Kit Plus

24 ft $13.99

$5.99

$31.99

*Add a carabineer! Available in 24', 35' and 45'

Available colors: Red, Black, Blue or Yellow

35 ft $18.99

$6.99

$35.99

45ft $22.99

$8.99

$39.99

Large Webbing Storage Pouch

Made of Heavy Cotton Duck to take the wear. Holds up to 50' of 1 inch tubular webbing.

Closure secures with a 2" Velcro strip with a long flap for easy opening. Fits into any pocket or placed on your belt/SCBA harness with two rear 2" Velcro straps. Pouch is 8” X 8” X 1”.

$11.99

GFLARGEWEB


Equipment you need 103

Ladder Boots

Protect your firefighters with this Cordura® Nylon Ladder Boot padded with high density foam.

Provides protections from the protruding base of ladders while mounted on the fire truck. Improved attachment strap is made of 2" webbing and 2" Velcro® on both sides, which provides a double shear locking flap. Reflective strip with "STAY BACK" sewn on, retaining strap.

RBAB651 4” wide X 22” high X 4” deep $61.49

Color: yellow.


8" deep x 4" wide x 22" high.



Wt. 28 oz.

Patriotic Ladder Boots

Fly our country's colors with this high quality ladder boot while providing protections to your firefighters. Constructed of vinyl-coated nylon which is impervious to oil, grease, abrasions, and tear resistant. Attaches with two 2" side release Derlin® buckles and a retainer strap. The full back panel is made of white 3M™ Scotchlite™ Reflective Material with a red and blue flag silkscreened in translucent ink with the imprint "KEEP BACK".

Color: Yellow

RBAB632 8" deep x 9" wide x 24" high

8" deep x 9" wide x 24" high.

Wt. 48 oz. RBAB633 8" deep x 11" wide x 25" high

$85.99

$100.49

P

M

E

N

T

E

Q

U

I

Rope Bags

$46.99

BBAB232

Personal Rope Bag

FDNY Life Saving Rope Bag

FDNY Life Saving rope bag meets and exceeds all of the FDNY specs. The bag is designed to hold 150' of 9/16" FDNY 3 strand spec rope or 175' of 1/2" rope. The bag measures 15" H x

14" W x 6" D. Sewn into the bottom of the bag is a 1" heavy duty "D" ring, which secures the end of the search line. The top of the bag is secured with a flap closure and two metal snaps.

Additional side flaps insure the contents remain inside. The top flap has a 3 1/2" x 4 1/2" opening which allows a life line to be deployed and/or replaced back into the bag. The snap closures on the top insures the contents stay inside the bag during use. A 2" web shoulder strap with an automotive seatbelt buckle allows for quick adjustment or removal in emergency situations if the user becomes tangled. All seams are pre-sewn and bound for extra strength.

All materials are American made and built to the highest standards. Color: White

Our Personal Rope Bag is available in 35' or 50'. Made of 1000 Deniur Cordura (TM) sized to fit 8 mm escape line. Features 3M Triple Trim, 1/2 inch grommet in bottom, cord lock closure, two tabs for carabineer attachment. Bail out or search line. Flat to easily fit in any pocket! Many colors available.

Size Item #

35 ft GFPRB35 or GFPRB&R35

50 ft GFPRB50 or GFPRB&R50

Bag Only Rope and Bag

$15.99

$45.99

$17.99

$56.99

Roof/Window Drop Rope Bag

Our Roof Bag (Includes 6700lb Carabineer) - Bag only or filled with 8mm NFPA line

4000lb Static Kernmantle. Great for Truck Companies! The bag easily attaches to your gear so that it will not interfere with your assent to the roof. Once on the roof simply remove the rope from the bag and begin

Size Item # Bag Only Rope and Bag your operations. 50' or 100' Utility Line.

100 ft GFRB100B or GFRB100 $17.99

$77.99

50 ft GFRB50B or GFRB50 $18.99

$77.99


104

Heavy Duty Rope Bags

Choose your bag

Easy Bag

E

Q

U

I

P

M

E

Keep your rope operations color coordinated with our heavy duty rope bags. Our bags are made of 1000

Denier Cordura®, this bag incorporates back pack style straps with release buckles for long carries(SAR). A cord lock closure keeps rope secure while not in use .Available

in Red, Green, Orange,

Yellow, Blue and Black.

35ft Bag Only $14.99

35ft Bag & Rope $52.99

50ft Bag Only $16.99

50ft Bag & Rope $62.99

This bag is made of 1000 Denier

Cordura. The 7” x 6” x 2” bag is tailor made to fit 35’ or 50’ of 8 mm lifeline. The large flap opening secures your carabineer for quick NO fumbling access.

It includes two brass grommets in the bottom of the bag to secure the rope.

It attaches to any belt or harness with two Velcro loops on the rear of the bag. Available in Red,

Yellow, Black Blue and Orange.

Purchase bag only or with NFPA

Lifeline and NFPA Carabineer.

N

GFHDURBXXX

Designed for 1/2” Rope

T

Holds 100ft Holds 150ft Holds 200ft Holds 300ft

$22.99

$22.99

$23.99

$30.99

Web Pouch Search Line Kit

NY SEARCH BAG

Made of Heavy Army Duck, the 9 x

5.5 search pouch has a 6 inch

Velcro belt loop on back allowing it to attach it to any SCBA harness or belt. The Web Pouch contains 24' of

Sterling one inch tubular webbing with 8 inch handles on each end.

This will allow you to tie off to fixed points for use as a search line, drag a victim to safety, or use as a multi purpose utility line.

Pouch Only $12.99

GFPOUCH

Pouch with Webbing $24.99

GFWEBPOUCH

$30.99 GFNYSEARCH

Large Area Team Search Kit

Made of Rip Stop Vinyl,

Holds 200' of 8mm or 350' of 6.8mm RIT 900. D-ring on the inside of the bag secures the rope to the bag while an additional

D-ring on the top holds the anchor point carabineer in the ready position.

A double flap top keeps your rope in place at all times. Included is a heavy duty fully adjustable 2" shoulder strap.

The Large Area Team Search Kit is made of heavy 10oz. Cotton Duck for wear and durability. Will hold up to 300' of 6.8 mm RIT 900 search line or 200' of 9mm RIT Response search line. Two 5" X 10" pockets are built in on each side to hold tools. Also included is a

2" heavy shoulder strap that that adjusts from 33" to 68" with a quick release buckle and two quick attach 2" scissor clips. Sewn into the bottom of the bag is a tie off loop to keep the bag and the rope together when you have depleted your line.

$46.99

GFTSB

Pro Escape Bag

The Pro Escape Bag is made of Heavy Duty Nylon and holds up to 50' of 8mm rope. Included are three pockets for additional items. The main pocket in front can hold Our Drag U Safe Kit

(7.5 feet of webbing with handles - Drag Strap, Tether, and or Utility) and the two side pockets hold small carabineers or a mini-8's. Each pocket has a Velcro tab to secure carabineers and or descending devices. The bag also contains two bottom grommets to secure the rope to the bag. Attaches to any belt!

Available with bag only or loaded with 50’ of 7.5mm NFPA Technora, 2 NFPA Screw Locking

Carabineers, and the Omega Descender SBG Belay II.

$24.99 GFPEB

$110.49 FPEBOLOADED

Bag Only

Complete Kit



Belts & Tool Belts

Last Chance Duty Belt

105

Our Last Duty Chance Belt is made of 1” 3/4 6000 lb Nylon webbing with life rated sewn in V-ring and pressure adjuster. This product is sold strictly as a duty belt and should not be used for repelling unless you are in an emergency last chance situation where egress is needed.

Two sizes available - Up to 43" and up to 58".

$23.99

GFLC43

$25.99

GFLC58

Baldwinsville Escape Work Belt

The Baldwinsville Escape Work Belt is made from 6000lb Nylon Webbing. A heavy duty auto locking hook and O-ring meets and exceeds ANSI Z-359.1

& CSA Z 259.1 specifications. The O-ring provides an attachment for your carabineer in case of emergency escape. Included are two 4000lb D-Rings for attachment of tools for use as a work belt.

Pull Test Results: 50.33 KN = 11,314 lbs.

To determine belt size, consider bulk of turnout coat

ADD SIX(6) INCHES TO NORMAL WAIST

SIZE

Waist Size 30”- 40”



$79.99

$88.99

$95.99

GFBEWB

NY Firefighter Belt

$42.99

30” - 45” GFNYREG

$50.99

46” - 60” GFNYLARGE

Two inch heavy duty Climb-Spec Nylon webbing makes up the

New York Firefighters Belt. Included is 3M lime yellow and silver reflective. Heavy Duty (with a rating of over 250 lbs) clip on attachments allow you to attach and detach your equipment. In case of an emergency easily pop the main clip and let the belt drop.

Essentially you have the ability to create your own belt to accommodate the tools you have. The New York Firefighters

Belt is purchased like a menu item, you order the belt along with what accessory attachments you would like to have.

Available Belt Ad-On Options Include : Flash Light Holder, Saw

Holder, Strap w/ Carabineer, Ax Holder, Drag-U-Safe Kit, Web

Pack, Search Line/Tagline Kit.

NY Firefighter Belt Add Ons

P

M

E

N

T

E

Q

U

I

Ax Holder

$4.99 AX

Light Strap

$5.99

LS

$4.99

GFUAX Our Universal Ax

Holders attaches to any belt or SCBA

Harness that is 2.25" or less and is secured by four over lapping heavy snaps. Once on the belt place the ax through the loop and go to work! Manufactured from heavy duty webbing.

Bineer

Strap

$23.99

CS

Tool Strap

$5.99

TS

Drag U Safe

$11.99 NYDUSSK

Universal Belt Add Ons

Our Universal Light / Tool attaches to any belt or SCBA

Harness that is 2.25" or less and is secured by four over lapping heavy snaps. Works great on a light, thermal camera, or any handle of a power

$5.99

tool.

GFLS/TS

Web Pack

$16.49 NYWP

Our Universal

Carabineer Strap attaches to any belt or

SCBA Harness that is

2.25" or less and is secured by four over lapping heavy snaps.

Can be used axes or an attachment

$23.99

point for tools.

GFCS

P

M

E

N

T

E

Q

U

I

106

Belts &Tool Belts

Leather Tool Belt

Regular Size Belt

$39.99

BO6547

16” Longer Size Belt

$42.99

BO6547XL

We have your belt

This is a traditional leather firefighter's belt with an improved design, it is 1 1/2" wide, 10-12 ounce, drum dyed bridle leather.

The rings are welded, the folds are riveted as well as stitched.

It is fully adjustable from sizes 38-50". All hardware is chrome plated brass. You can also order our longer belt that is 16” longer.

Optional equipment hooks and rings can be easily removed and are available separately.

3” Ring

$6.75 BO6546

Optional Hook

3” Ring XL Belt

$8.49 BO6546XL

$7.99 BO6548

4” Ring

$6.99 BO6544

RIT Belt Complete Package

Made of 100% Kevlar® for strength and maximum heat resistance, this belt is rated for ladder escape and is fully adjustable up to 10” with the steel side pressure adjuster. The double locking hook makes it easy to dawn and doff.

Included is a built in ax loop, hasty harness strap, and utility slots,KLT-Kevlar® Saw/Light Tool Strap, Carabineer Strap,

10ft Kevlar® Tether, Drag-U-Safe Kit, 24’ Web Pack.

30”-40” Regular 35”-46” Large 41”-52” X-Large

46”-58” XXLarge

Complete Belt

$193.99 REG

GFRITBELTCOMPLETE

$197.99 LARGE

$209.99 XLARGE

$214.49 XXLARGE

NYFD Escape Harness- Class II

Webbing: 6000 lb MTS

Auto Locking Side Hook: 5000 lb MTS / CSA

- ANSI Cert.

Belt Adjuster: 5000 lb MTS / CSA - ANSI

Cert.

Side D-Rings: 5000 lb MTS / CSA - ANSI

Cert.

Leg Adjusters: 4000 lb MTS / CSA - ANSI

Cert.

V-Ring 5000 lb MTS / CSA - ANSI Cert.

Auto Locking D Carabineer:

$127.99

NFPA

$139.99

GFNYFDREG

GFNYFDREG

Up to 40” Waist

Up to 55” Waist

The NYFD Escape Harness easily integrates with all turnout gear. Left or right handed opening is available to accommodate the opening of your bunker pants. The center tether is connected to two side D-Rings that pivot in the direction the tether is positioned. This eliminates stress on the harness straps. The center tether when extended is above the firefighters center of gravity to prevent rotating upside down when in an egress position. The tether attachment points are on each side of the body to maximize your center of gravity. We have included a V-Ring on the tether that can move freely left or right to always provide you with a taught tether. The tether (when in idol position) easily folds across the waist and is connected with two quick release straps.

Also included is leg strap loop that holds the two leg straps together to prevent riding on the back of the leg. Additionally. you are provided with belt loops that attach between the snaps on the inner and outer layer of your bunker pants. These straps will keep your harness in place at all times.

FESH System - Class II Harness

Our Class II Harness - Made of 6000 lb Nylon webbing.

Includes double locking pressure buckle - 4000 lbs, 5000 lb side D- Rings, and fully adjustable leg straps with 5000 lb pressure adjusters. Permanently stays on your bunker pants with side pant pull strap belt loops. One size fits all.

$161.99

GFFESHHAR



Belts & Straps

Truckee Belt

107

The Truckee Belt is made of 2" Nylon webbing and is fully adjustable in the front and back to accommodate all sizes. The belt includes a light/thermal camera holder which is removable via the 2" Male/Female connectors/ Also included is the ax holder. Additional Carabineer Strap is available. Fits Sizes 31"-53";

Custom sizes can be made at no additional charge!

Convert any rated Escape

Ladder Belt to a harness with one or two leg straps. Fully adjustable with a minimum tensile strength of 4000 lb.

Available in Nylon or Kevlar 1"

3/4 webbing. One size fits all

$36.99

GFTRUCKEE

$57.49

with extra carabeener GFTRUCKEEC

Harness Leg Strap

All Purpose Strap

Our Heavy Duty 2" Tool Strap is fully adjustable to accommodate all sizes. Included are two heavy duty steel swivel scissor clips to attach to any tool. Saws, Light Boxes,

Cameras or any tool with attachment points.

P

M

E

N

T

E

Q

U

I

$17.99

GFLEG

$16.99

GFHD2

All Purpose Quick Release Strap

Stor Haul Strap

The 1” All Purpose

Strap has two scissor clips to attach to any light box, saw, or tool.

The fully adjustable shoulder strap 52”-66” includes a quick release buckle for easy removal and MIC

LOOP.

Ideal for a Set of Irons,

Electrical Cord, Hose,

Rope, Hydraulic Lines

Simply place the strap around any object, clip together, and sinch tight!

Most equipment is stored either loose, in crates, or

$7.99

GFAPS

HEAVY DUTY

STRAP with non lasting velcro straps. The StorHaul was developed to permanently secure all of your loose $2.99

$3.99 GFSHHD

GFSH lines critical to all calls.

The quick release buckle is rated to 165 lbs and the d-ring for 118 lbs. Because the StorHaul has male and female ends, many can be attached together to increase its

Heavy Duty Tool Strap

Every Firefighter carries tools.

Depending on the job, it might be an ax, halligan, saw, light, thermal imaging camera, generator, fan, the list goes on. Our tool strap goes around the handle of any tool and then can be attached to your

SCBA harness or belt via the 3" diameter carrying capacity. It also offers a built-in handle and D-Ring to make it easy to carry and store your vital equipment.

Pant Liner Keep Downs

carabineer for easy carrying. The carabineer can also be used as a handle when carrying fans, generators, or any heavy objects. The list is endless for what this simple tool can do!

$7.49

GFTOOL

Made of 1" Kevlar webbing, the

Keep Downs prevent heat, soot, water, snow from entering your pane legs. Place around the liner of the pant at the neck of the boot and tighten snug.

$23.99

per pair GFPANTKEEPER

$9.49

KEVLAR GFTOOLKEV


108

Rubber Helmet Strap

Straps & Holders Get what you need

Footman’s Strap

E

Q

U

I

A heavy rubber band 1" wide by

10"s flat with a circumference of 20" unstretched.

Color is black.

$2.25

GFRUB

$16.00

FHFS

This strap holds 2-1/2" hose fold-up's like the FDNY uses for their High Rise

Operations. It can also be used for holding or handling various types of equipment such as electrical cords and other applications. This 2" yellow strap with a 12 inch velcro closure makes fold-up's of 2-1/2" hoseline a must when carrying them over the shoulder. P

M

EZ- Can Strap Mount Footman’s Strap Mounting System

E

N

T

$29.95

FHEZCB

This new EZ mount bracket is designed for holding various types of extinguishers. The bracket is made with a 2" straps attached to an aluminum plate. This system allows you to mount your extinguisher almost anywhere with little space used.

The Glove Keeper

$4.79

GFGKEVLAR

The Glove Keeper is the only NON -

VELCRO Firefighter's Glove Holder on the market.

Velcro holders have a tendency to get filled with lint and debris, not allowing them to stick together and securely hold your gloves. Being made of nylon,

Velcro may melt quickly when exposed

$3.99

GFGK to heat, and if the Velcro strap were to get caught on or brush against something, it may pop open unexpectedly releasing your gloves.

The Glove Keeper's many benefits resolve all the frustrations

Firefighter's have expressed with Velcro holders. Quickly place any size Firefighter's or rescue gloves through the loop and cinch it tight. You will never lose your gloves, and will even have room in the holder to hang your Nomex hood. The Glove Keeper has a split ring that attaches to any D-Ring on your gear, and an extremely durable utility clip is included for those styles of turnout gear where D-Rings are not included. A small safety ring will break apart at approximately 65 lbs. of pressure to ensure your safety while in a structure, and the Glove Keeper is rated to 421 degrees Fahrenheit so that it will take the heat. * Now available in KEVLAR with a heat rating of over 421 degrees.

Available Colors: Yellow, Gold, Orange, Black/Yellow, Maroon,

Red, Royal Blue, Purple, Black, Pine Green, Kelly Green, Dark

Green, Black/Red, Tan, Camouflage, Smoked Gray, Navy Blue,

Red/White/Blue.

A mounting strap system designed for holding 2-1/2" fold-up's on fenders of pumpers. It can also hold various types of extinguishers, air pack bottles, and more! A

2" straps is used with our two footman brackets and drill tap screws. This allows you to mount equipment almost anywhere with little space used. Has a

12-inch velcro closure for holding strength.

$20.00

FHFSS each

Water Jug Strap Mounting System

$29.95

FHEZWJ

This mounting system is designed for your water jug. It is equipped with a mounting plate and has an adjustable velcro strap for multiple types and size water jugs.

Glove Keeper II

Our Glove Keeper II wraps around any size gloves. The male/female connector clips together with ease and then is cinched tight with the d-ring. To release the gloves, simply pinch the connector!

The D-ring can be used to hang other objects such as flashlights.

Available in Red , Yellow , Blue , Black,

Orange

$3.99

GFGK2


Choose your holder Glove Holders

109

Glove Keeper III Leather Medical Glove/CPR Shield Holder

The Glove Keeper III is the only

NON - VELCRO Firefighter's Glove

Holder on the market.

Velcro holders have a tendency to get filled with lint and debris, not allowing them to stick together and securely hold your gloves. Being made of nylon, Velcro may melt quickly when exposed to heat, and if the Velcro strap were to get caught on or brush against something, it may pop open unexpectedly releasing your gloves.

The Glove Keeper's III's many benefits resolve all the frustrations Firefighter's have expressed with Velcro holders.

Quickly place any size Firefighter's or res-

$4.99

GFGKIII cue gloves through the loop and cinch it tight. You will never lose your gloves, and will even have room in the holder to hang your Nomex hood.

Included is a Scissor clip for easy attachment to any d-ring on your gear.

Velcro Glove Straps

Rubber Glove/CPR Shield

Pouch w/Snap Closure

Will hold two pairs of disposable gloves, or one pair of gloves and one resuscitator

Slides onto any size belt

Top grain leather

Shown in picture: Black plain leather with chrome snap. Available in Plain, Clarino or basketweave. Black or Brown.Black, Gold or Silver

Leather Style

Snap Closure

Velcro Closure

Soft Medical Glove Pouch

$4.99

$7.25

$7.99

GFSP2

Plain Clarino Basket Weave

$8.99

$9.49

$5.99

$7.99

$8.99

GFSP4

E

Q

U

I

P

M

E

N

T

Our Velcro Glove Straps are made of high strength nylon webbing. Its heavy duty hook and loop Velcro provides for a strong hold on your gloves. Incorporated into its construction is a heavy snap hook, scissor clip, or swivel clip

(depending on style) that allows you to attach it to and Dring on your gear! The Kevlar Strap includes FR-fire resistant Velcro.

How many times have you jumped off the rig for and EMS of Hazardous

Materials call and you or your partner forgot rubber gloves?

Our Rubber Glove Pouch holds two or four pairs of Rubber Gloves. It attaches to any belt, suspender strap or EMS bag via the snap strap and is easy to open. Manufactured from heavy 3" and 4" webbing.

Never forget your rubber gloves again!

2 Glove Pouch 4 Glove Pouch

Leather Glove Holder

Nylon

Webbing/

Swivel

Scissor Clip

$4.99

GFVGSII

Tubular

Webbing /

Heavy Snap

Hook

$4.99

GFVGS

Kevlar

Webbing w/

Swivel

Scissor Clip &

Fire Resistant

Velcro

$4.99

GFVGSIIIKEV

Heavy

Webbing,

Swivel Clip.

Pull Tight

Loop Design

$4.99

GFGLOVEHOG

Velcro lined leather strap

Securely wraps around any size gloves

Sewn on square ring feeds through a belt keeper (sold separately) chrome ring. Available in Plain, Clarino or basketweave. Black or Brown.Black,

Gold or Silver snap.

Shown in picture: Black plain leather with a

Leather Style Plain Clarino Basket Weave

Price $5.99

$7.99

$6.99

$5.99

BO9125

Leather Glove Holder

Velcro lined leather

Wraps around gloves and clips to turnout gear

Black, plain finish only


110

Suspenders & Holders

Leatherman Tool Case we have your suspenders

Maglight/Pliers Case

P

M

E

N

T

E

Q

U

I

Our Leatherman Case fits on any belt 2.5" of less. Your Leatherman tool is secured with the cover that snaps into place. Manufactured with heavy 4" webbing.

$4.95

FHLKC

Made of heavy seatbelt webbing

Our Mag/Pliers Case fits on any belt that 2.25" or less. Makes access to your tools quick and easy!

$3.95

FHMPC

Alice Clip

An ALICE clip which can be used to attach bags and pouches to your belts and harnesses. It works by sliding the gate up to the open position, attaching it to your gear and then sliding it on the belt or vest in your desired spot. You then close the gate and your gear is secure until you decide to remove or relocate its position. Many of our products are made to accommodate the Alice Clip.

$3.99

FHALICE

Standard Type

Item

GENX2934

GENX3542

GENX4350

GENX5161

Size Price

29”-34”

$17.99

35”-42”

$18.99

43”-50”

$19.99

51”-61”

$20.99

Bunker Pant Suspenders

Pull Strap Type

Item Size Price

GENXP3244

32”-44”

$24.79

GENXP3542

38”-50”

$25.79

GENXP51

51” +

$26.79

Our "unique, one of a kind" GENX

Suspenders are made of 100% heavy two inch elastic webbing. The full “X” support on your back makes this product one of the most comfortable suspenders on the market. The eight point straps are floating to adjust to your every move. The GENX are fully adjustable with all sizes available.

Available in standard design or with stainless steel ladder lift up adjuster and pull straps.

Our neoprene foam suspender pads are 12" x 3" and attach to any existing suspenders on the market.

To determine your size, measure from button tab on the back of your bunker pant, then over your shoulder to front button tab on your bunker pant.

Suspender Pads

Our neoprene foam suspender pads are 12" x 3" and attach to any existing suspenders on the market.

$11.99

pair GFPADS

Leather Bunker Pant Suspenders

These leather suspenders are 1 1/2" wide. they are equipped with adjustable straps and roller buckles.

They are also available with button or clip fasteners.

These suspenders are also available with reflective strips sewn in the straps for added safety when you don’t have your turnout coat on.

Standard Suspenders

Standard Suspenders with Reflective Stripes

Xtra Long Suspenders

Xtra Long Suspenders with Reflective Stripes

$40.99

$45.99

$43.29

$47.79



Hose Management

Hose Straps

Our Hose Strap is made of heavy two inch webbing with a Velcro pass through securing system. The strap is made available in many sizes to suit all of your needs. Can be used for high rise packs and any misc. lengths of hose.

Sizes available are: 16",

24", 32", and 40"

GFHK16 16” Strap $5.99




111

XTRA MAN Hose Strap

$9.99

GFHS

Its like having an addition firefighter with out having them there!

The Heavy Duty Hose Strap allows a firefighter the support the back end of a 2 1/2 inch or 3 inch hose, especially when you are running short crews. Also, use it to help pull your attack lines to the front door.

One end of the strap secures around the back end of the hose, while the adjustable shoulder strap is placed around the opposite shoulder. Your shoulder supports the back half of the house allowing you to easily flow water while maintaining control of the hose.

OCTOPUS Hose Carriers

P

M

E

N

T

E

Q

U

I

Our Hose Carry Systems are designed to carry up to 250ft of 1-3/4" hose, 200ft of 2"hose, or 150ft of 2-1/2" hose. Cinch straps are made of 2" heavy webbing with adjustable quick release buckles. Handles, shoulder straps and support straps are an alternative color easy identification. Each System is 28" long with the cinch straps at 50" in circumference.

Octopus I (With handles) $23.95

Octopus I I (With handles and shoulder strap) $32.95

Octopus III (Includes handles, detachable shoulder strap, four cinch straps, and three support straps) $61.99

Jack Pack High Rise Hose Pack

Hydrant Lay Strap

The Jack Pack High Rise Hose Pack is 3' L X

11"W X 11"H and will hold 150-200 feet of 1-1/2" to 1-3/4" double jacket hose or 150' of 2" double jacketed hose. Made of doubled 22 oz Rip Stop

Vinyl. Includes four handles for multiple carry positions along with a removable shoulder strap for a one person carry. The ends are hinged on the bottom with side

Velcro closures for

$95.99

GFJACK

The Large Diameter Hose Strap (LDHS) assist in getting large diameter hose off the hose bed for attachment to a water source safely and allowing the engine to proceed for fire operations. Constructed of 3” nylon webbing, with a tensile strength of 22,550 lbs., and strong stitching with heavy brass rivets give you long life. Also works great for tanker operations To secure the hose a heavy hook & loop closure with a zinc plated adjuster allows for additional hose for hydrant operations. Length: 60” Wt. 32 oz.

$42.99

RDADLDH01

Hydrant Tool Bag

Developed for easy access to commonly used tools. No flaps, zippers or closures to get in the way when specific tools are needed quick. Constructed with R&B Fabrication's "TUFF BOTTOM" this durable bag has superior durability, yet it is extremely lightweight. The outside side walls of the bag are constructed of heavy reinforced vinyl and the inside walls have rigid plastic for support and durability. Outer pocket has ample room even for large diameter hose wrenches.

Reinforced webbed straps make the handle strong and easy to use even when wearing thick firefighting gloves. Measures 21" x 9" wide x 9 1/2" high.

$58.99

RDAD443


P

M

E

N

T

E

Q

U

I

112

Chocks/Wedges/Door Markers Keep It Open!!

Door/Sprinkler Wedges Handi-Wedge

Only

DW10PK Our most economical utility wedge, door chock, $24.99

helmet chock, whatever you call them for your use, performs various tasks. The safety yellow color makes it highly visible. Molded from firm rubber material.

Essential tool for anyone anywhere,(including your home, office, garage, firefighter use even Police use.)

Sold in packs of 10

Our Handi Wedges are excellent for stopping the water flow from sprinkler heads. They also work well as door stops.

Very convenient to carry and inexpensive. Sold in packs of 4 or 25.

4 pack is Only

$4.50

HW4

Wedge-It

25 pack is Only

$25.99

HW25

Ribbed construction for maximum strength while weighing less than 3 oz.

Virtually indestructible because of LEXAN plastic construction, the same as bullet proof glass

Small enough to fit in a pocket, strong enough to hold open the largest of doors and portable enough to hang on a uniform or trauma kit

Four non skid polyurethane pads prevent it from sliding when placed on top of door or on smooth surfaces

Notched to fit over top of hinge pin and hole is provided to assist with carrying

Eliminates the use of rolled up newspapers, flower pots, doormats or other objects to hold doors open

GFMW

GFDDM100

Multi Wedge

Bottom of Door, Hinge, or Top of Door

Our Multi-Wedge Door Wedge does it all! Fits on any hinge, the top of the door, and/or bottom of the door. Made of aluminum to keep it light and last forever. Attaches to your

Only gear with a heavy spring clip.

$4.99

Double Door Markers

These door markers simply snap over the knobs on both sides of the door to prevent closing while firefighters are searching a room. Convenient to carry. Works better than other temporary methods to mark doors.

Available in orange or yellow.

Custom imprinted messages are also available.

Sold in

Only packs of

12 or 100

$139.99 for 100

Only

$24.95 for 25

Available in Yellow,

Green, Black or Orange

Only

$7.75 each

Single Door Markers

GFSDM100

When searching a large occupancy building, rooms can be searched over and over again.

Save time and manpower with our search door markers.

Once a room has been checked, simple hang the marker on the door and alert

GFSDM25 those searching that the room has been

Only checked.

$24.95 for 25

Available in orange or yellow. Custom imprinted messages are also available. Only

Sold in packs of 25 or 100 $69.99 for 100

Door Marker Carry Pouches

These handy pouches can hold either

12 or 24 door markers. Remember to specify single or double door markers.

SDMP12 holds 12 single $13.00

SDMP24 holds 24 single $14.00

DDMP12 holds 12 double $14.00

DDM24 holds 24 double $15.00

GFDDM25


Isolate It!

113

ZipWall® is an award-winning barrier system. It has been honored by the press and hailed by the

FIRE/RESCUE, LAW ENFORCEMENT and MEDICAL

INDUSTRY, as well as by builders, painters, carpenters, floor refinishers, demolition workers, restoration companies,do-it-yourselfers. It is as a simple and effective method of controlling dust by isolating the worksite from other areas.

The patented ZipWall® spring loaded barrier system consists of telescoping twist lock ZipWall® poles available in both twelve and twenty foot lengths. The system locks the screening material (ordinary plastic sheeting, light canvas tarp or drop cloth) firmly against the ceiling, creating a "virtually airtight" barrier. Once in place, just lift and tuck the screening material under the pole to create a tight barrier from top to bottom.

The SLP™ pole has the spring loaded plunger built right into the pole. The plunger is made of polycarbonate and is incredibly strong yet the SLP™ pole weighs in at just over a pound and a half. This makes them hard working on the job yet easy to handle and transport.

The poles extend from 4' 9" to 12', just right to reach any standard ceiling. This product has received raves from This Old House magazine, Remodeling magazine, and many others. The readers of Building Products magazine gave the ZipWall® system the Readers'

Choice Award for 2006.

P

M

E

N

T

E

Q

U

I

ZWSLP2 ZWSLP6

$119.00

2 spring loaded poles

2 grip disks

2 tethers

ZWRLFP

$449.00

ZW4PL

$279.00

4 SLPs

2 Foam Rail cross bars

4 Grip Disks

2 ZipWall standard zippers

1 Carry bag

ZWKT20

$329.00

6 spring loaded poles

6 grip disks

6 tethers

ZWFR2

Caution Tape Reel

300 foot roll of caution tape

6 Tape Clips

6 Spring loaded poles

Carry Bag

ZWSDPK

$192.95

2 20 foot extension poles

2 spring-loaded jacks

2 grip disks

2 tethers

ZWCB1

$59.00

$69.95

2 five foot Foam Rail cross bars

2 T-clips

$169.00

6 Side Clamp wall mounts

6 special 3 foot Foam Rail wall mounts

Custom bag

ZWRLPK

Caution Tape Reel

300 foot roll of caution tape

6 Tape Clips

$79.00

1 Carry Bag

ZWSC2

$39.95

2 Side

Clamps

ZWHDZAZ2 ZWAZ2

$18.95

$10.95

2-7ft zippers

Zipper Knife

2-7ft zippers

2- tie strings to support openings


114

EVAC Chairs Get Them Out!

The Glider

P

M

E

N

T

E

Q

U

I

THE GLIDER• Evacuates both up & down stairs

• Weight capacity of over 650 pounds

• Sturdy aircraft grade aluminum

• Glider mechanism for smooth descent

• Weather proof open-weave polyester

• Comfortable non-slip rubber grips

• Leg sling/rest

• Additional leg restraints

• Safety harness

• Arm rests and safety restraints

• Removable head restraint

• Two large storage pockets for first aid equipment

Our newest chair, THE GLIDER, is redesigned to evacuate downstairs with only one person maneuvering the evacuation chair.

This chair is the perfect evacuation solution for mobility Many people are immobilized by their injuries during emergency evacuations, and require quick, safe transportation to medical aid..

Dimensions:

Folded: 60” x 24” x 11”

Unfolded without headrest:

60” x 24” x 37”

Model 1310

$1080.00

This chair helps reduce trauma and gets the injured away from danger quickly.Whether

it’s used in the home or hi-rise building, THE

GLIDER is the ideal device for fast, safe evacuation.

No other devices exceed our evacuation chairs in quality, reliability and functionality.

The First Response Chair

Dimensions:

Folded: 60” x 24” x 11”

Unfolded without headrest: 60” x 24” x 37”

Model 440

$599.00

In many emergency medical situations a first aid kit is just not enough. Many people are immobilized by their injuries and require fast, safe transportation to urgent medical care. That's where the First

Response Chair makes a difference. Physically lifting an injured or immobilized person can be dangerous even with proper training. This chair helps reduce the trauma effect and transports the injured or mobility impaired away from immediate danger quickly and comfortably. The First Response Chair comes with it's own first aid kit and emergency blanket. It's wide pneumatic tires help navigate over and around obstacles and, like all the chairs, it is designed for stairwell evacuation. Other features include quick release upper body straps, arm and leg rests, leg slings and multiple points of lift. The

First Response Chair folds for compact storage and comes with hardware for wall mounting.

Model 440

• Weight capacity of over 600 pounds


• Weather proof open-weave polyester


• Leg rests with slings

• Safety harness

• Arm rests

• Large storage pockets for first aid equipment

• Arm safety restraints

• All terrain pneumatic tires

The Emergency Chair

Model 400

• Evacuates both up & down stairs

• Weight capacity of over

600 pounds


• Heavy-duty sailcloth


• Leg safety restraints

• Safety harness

• Arm rests

• Arm safety restraints

• Rugged polyurethane wheels

This chair is the perfect evacuation solution for the mobility impaired.

Whether its used in the home or hi-rise building, the Emergency

Chair is the ideal device for fast, safe evacuation. No other devices exceed our chairs in quality, reliability and functionality

• Folds flat to mount on almost any wall

• Mounting hardware included

• Weighs less than 25 pounds

Dimensions:

Folded: 60” x 24” x 11”

Unfolded without headrest: 60” x 24” x 37”

Model 400

$499.00


Rescue Them Quickly Ice and Water Rescue

Search and Rescue (SAR) Vest

115

I424 Comfort Series™ Utility Vest

Type III "SAR" Vest - 4185

Security and comfort for water rescue personnel.

• Fleece-lined handwarmer pockets with zippered and pleated gear storage compartments

• Leg strap with storage pocket, 2" wide adjustable belts and chest strap, emergency whistle

• 62 sq. in. (400 sq. cm.) of 3M™

4185ORG Scotchlite™ Reflective Material SOLASgrade 6755 on panels

• 2" wide reflective strip on back and 3/4" reflective strip around collar

• Pockets and Velcro® patch for light (light not included)

• Minimum 15-1/2 lb. buoyancy

$93.99

• USCG Approved Type III

Small-XXXLarge add $4.00 for XXXL

6141 Low-Profile Enforcement Vest

The Comfort Series™ Utility Flotation Vest -

I424

The Comfort Series™ utility vest is specially designed with soft, lightweight mesh on the upper half of the vest for comfort and ventilation.

• Tough, nylon oxford outer shell - ANSI approved has polyester outer shell

• Two encircling body straps

I650 loop closure

• Lightweight, durable Crosstech® flotation foam

• D-rings for attaching gear with zipper front

• Two pockets with hook and

• I424ORG features 3M™ Scotchlite™ Reflective Material SOLASgrade 6755 on panels

• I424ANSI features 3M™ Scotchlite™ Reflective Material SOLASgrade 6187 on panels


$62.99 Non-ANSI

• USCG Approved Type III $99.99 ANSI

Small-XXXLarge add $4.00 for XXXL

ANSI or Non ANSI

6141 Low-Profile Enforcement Vest - 6141

• Contoured super soft Suisse Aire™ foam

• High tenacity 210 Denier nylon oxford outer shell and lining

• Triple side adjustments and elastic side panels for a comfortable and secure fit

• Adjustable neoprene shoulders for maximum maneuverability

• Spacious side entry front pocket constructed with durable Cordura® fabric

• Low profile vest works well with a utility belt


• USCG Approved Type III

Orange-Black-Yellow Small-XXLarge

$80.99

6155REF Whitewater Rescue Vest

6155REF Whitewater Rescue Vest - 6155REF

Type III/V Whitewater Vest is ideal for water rescue. Features two encircling body straps and one chest strap.

• Durable nylon oxford outer shell

• Soft Aquafoam™ flotation foam

• Foam-filled head support

• Heavy-duty buckles for security

• Minimum of 22 lb. buoyancy for improved flotation

• 3M™ Scotchlite™ Reflective Material

SOLAS-grade 6755 on collar and head support for greater visibility

• USCG Approved Type III/V $80.99

Small-XXXLarge Add $5.00 for XXXL

I650 Stearns® VR™ Versatile Rescue

Stearns® VR™ Versatile Rescue Vest

- I650

This professional PFD is designed to provide extra shock absorption.

Features a rugged

500 Denier nylon pack cloth outer shell for strength and durability, and a soft 200 Denier nylon liner for comfort. The

Stearns® VR™ is constructed with a bright yellow or red I650 outer shell for daytime visibility and 3M™ Scotchlite™ Reflective Material SOLAS grade

6755 on front and back for improved nighttime visibility. Instructional video included.

$169.99

Universal size- Red or Yellow

Auxiliary Tether System

(Optional) - I651

• Tether System For Advanced

Trained Rescue Personnel

• Designed specifically for use with the I650 Versatile Rescue Vest

• Supports up to 1,100 lb. when properly integrated with the I650 cam lock buckle release system

• Includes 4' of nylon webbing, heavy-duty carabineer and stainless steel O-ring

• Allows for right or left shoulder placement

$29.99

E

Q

U

I

P

M

E

N

T

I024 Type IV - 24" Ring Buoy

replaceable

• USCG Approved Type IV

I030 Type IV 30" Ring Buoy

Type IV Ring Buoy - I024

Industrial ring buoys.

Molded from high impact linear low density polyethylene for superior life expectancy in the most severe environmental conditions.

• Encircling rope is

$46.99

Type IV Ring Buoy - I030

Industrial ring buoys.

Molded from high impact linear low density polyethylene for superior life expectancy in the most severe environmental conditions.

• Encircling rope is replaceable • USCG Approved Type IV

30" Bridge Buoy with Reflective Tape

$82.99

Ring Buoy Bracket

$10.99

116

Ice and Water Rescue

Cold Water Immersion Suit

Rescue Them Quickly

Ice Rescue Suit

E

Q

U

I

P

M

E

N

T

Cold Water Immersion Suit -

Type S

USCG / MED / SOLAS Approved

When lives are at stake, more maritime professionals worldwide rely on the Stearns® I590 Cold

Water Immersion Suit than any other immersion suit brand. Made with 5mm stretchable flame retardant neoprene, the Stearns® I590 provides quality anti-hypothermia protection.

• All sizes provide a generous fit for easy donning

• Each suit comes in its own color coded storage bag

• USCG Approved and complies with SOLAS 74/96 and European MED.

$374.99

I590

Driflex Cold Water Rescue Suit

The Ice Rescue Suit™ - I595

One-piece suit of 100% closed-cell neoprene provides optimum buoyancy and insulation. Designed for rescue operations in extreme cold water and ice conditions. Features face seal and flap, attached gloves, waterproof zipper and sealed seams.

• Off-set zipper for better face seal

• Wrist pocket to hold ice picks

• Reinforced knees and elbows for long-lasting durability

• Integral chest harness with stainless steel D-rings front and back

• Uses 3M™ Scotchlite™ Reflective

Material SOLAS grade 3150-A PS with adhesive backing on front and back panels for high visibility

• Individual bag for convenient storage

• Thick soled boot with tread for sure footing

• Not USCG Approved

$453.99

I595

Water Rescue Throw Bags

I596 Driflex™ Cold Water Rescue Suit

The logical choice for Ice Rescue

Professionals everywhere. We listened to the pros and developed features not found on any other suit. Our new Burp Grip™ handle makes it easier to release the air in the suit, and the Invisivalve™ allows for continuous purging of the air ensuring that you get the maximum performance of the suit while being able to focus solely on the rescue.

• New Burp Grip™ handle makes it easier to release the air in the suit

• New Invisivalve™ allows for continuous purging of the air ensuring that you get the maximum performance of the suit

• Large cut

• Additional reflective tape around the wrists for greater visibility

• Shell is constructed of sonic welded PU coated nylon

• The thermal liner combines the insulation of our Aquafoam™ and the ease of donning provided by the nylon surface

• 3M™ Scotchlite™ Reflective Material SOLAS-grade 6755 on front

• This suit will meet the demands of fire department and ice rescue personnel nationwide

• Not USCG Approved

$637.99

I596

The Nylon High Visibility Water Throw Bag, Includes top handle for easy deployment, bottom rope grab, cinch closure, and Sterling's Polypropylene Drycore

Floating Rope (8mm).

Available sizes 50', 75', and 100'

GFBTRTB50 50 ft of Rope

GFBTRTB75 75 ft of Rope

$23.99

$39.99

GFBTRTB100 100 ft of Rope $50.99

Thermal Protective Aid

Hypothermia protection during prolonged exposure. Designed for hypothermia protection during prolonged exposure in life rafts or lifeboats. Waterproof polymer-coated fabric has very low thermal conductivity to reduce heat loss in cold, wet conditions.

Attached sleeves

62 sq. in. (400 sq. cm.) of reflective material

Tape seams for strength

Extra-large sizing to fit over all clothing

U.S.C.G.-approved

Complies with

S.O.L.A.S. 74/83

$49.99

ITP1

Color: International Orange

Neoprene Cold Water Sportsman's Gloves

Seams are glued and blindstitched, pre-formed design for fit. 2mm thickness for warmth, protection and durability. Rugged "Sharkskin" palms for sure grip. Adjustable wrist strap for snug fit.

$17.99

5600

Neoprene Cold Water Sportsman's Gloves

$19.99

5602

Arctic Waters™ Neoprene

Gloves - 5602

• Pre-curved finger design

• Glued and blind-stitched seams make this glove waterproof and windproof

• 2.5mm Dura Mesh neoprene for warmth, protection and durability

• Adjustable wrist strap for a snug fit


Rescue Them Quickly

RSQALIVE

$2995.00

Ice and Water Rescue

117

Rescue Alive Ice and Water Rescue Platform

Thin ice is a trap and every year hundreds of people fall into that trap. Victims have only minutes to help themselves because hypothermia quickly impairs a victim's ability to hold on to ice. It makes him shiver violently and clouds his thinking. As the victim's core temperature drops, he experiences disorientation and he becomes dangerous to the rescuers. This all happens within minutes of entering the water! Get the very best equipment for ice and cold water rescues. RESCUE ALIVE enables your rescuer to run over very thin ice by distributing his weight over a large surface or to paddle through open water to reach a victim quickly. The unit weighs 88 pounds and provides 600 pounds of flotation. The unit is deployed by releasing one

Velcro™ strap, which is then used to tether the modified paddle.

Your rescuers stay out of the water; there is no need to crawl or swim to approach a victim.

Rescuers remain on top of the surface, working from the stable platform. The rescuer stays in control of the victim.

P

M

E

N

T

E

Q

U

I

Water Rescue Jaws

With Water Rescue Jaws, you can:

Probe in deep water with the 18 foot telescoping pole

Search effectively in open water

Search effectively in muddy water

$189.50

Search through ice

Search through slow currents

Retrieve a victim without the threat of puncturing skin

Store easily in a 24" by 72" area

WATERJAWS

The Water Rescue Jaws enable surface teams to continue their rescue until they are relieved by divers. This provides an unbroken chain of effort to retrieve a victim while he can still be revived.

The Water Rescue Jaws is a reach pole that grabs a victim and holds him until he reaches the surface. A short downward thrust opens the "J" shaped tongs to a width of 42 inches. When downward motion stops, the tongs automatically close. As a victim is lifted to the surface, the upward movement through the water, along with the force of gravity, keeps the tongs closed, securely grasping the victim. The tongs are made of blunt ended aluminum to avoid puncturing the victim's skin.

Pick Of Life Self Rescue Awls

$19.95 per set

PICKOFLIFE

Pick of Life can get you out!

The Pick-Of-Life is a life saving tool for anyone venturing out onto the ice. Rescue professionals, ice fisherman, snowmobilers and outdoor enthusiasts rely on the Pick-Of-Life as standard safety equipment. The

Pick-Of-Life provide solid hand holds enabling a victim to climb out of a hole in the ice.

An Ice Safety Guide is included with the Pick-Of-Life. The

Guide supplies users with self rescue procedures and load bearing information to assist in making safe decisions.

Water Safety Light

New! from Cyalume, the

SOLAS PML® is a water safety device that is both Water

Activated and Manually

Activated. This new device uses Chem-Light® technology and electronics.

- The white S.O.L.A.S

approved light will start flashing automatically when immersed in water. (for unconscious users)

The Chem-light® portion of the device is manually activated when squeezed: bend, snap, and shake. Then remove protective sleeve to reveal the 360° of

Chem-light® illumination. Both the

Electronic light and Chem-light® are visible up to 1 nautical mile (3 miles by air), 8 hours of emergency light.

SOLAS PML® offers one hand activation, PFD clip, 4 year shelf life, and is light weight, nontoxic and waterproof.

Sold in Packs of 20

$387.99


P

M

E

N

T

E

Q

U

I

118

Saws

Ventilation Saw

Saws you need

$1794.00

SV3-16

$1835.50

SV3-20

With a powerful Dolmar 6.3 HP engine that turns at 13,500 RPM, your department can rely on the Super Vac SV3 Power Pro Saw for venting and rescue operations. With a full-wrap handle designed for maximum versatility, this saw tackles a variety of operations with ease, including cutting through residential roofing, removing downed trees, and ripping through various building materials. With a quick start compression release and an "always on" ignition ,the SV3 is ready to go when you are.

SV3-16 HP -6.3 H x W x D 11.25"x13"x34.5" Weight 20.8lb 16" Bar

SV3-20 HP -6.3 H x W x D 11.25"x13"x38.5" Weight 21.6lb 20" Bar

Chisel Chain / Depth Gauge:

When you're ready to cut, the depth gauge can be set to the depth of the cut then the carbide tooth chain chisels through layers of material.

Air Master Filtration:

Two chamber filtering system that catches large and small particles to make it the choice product working in laden environments.

D-Ring Handle:

Gloves fit into the starter handle and an easy spot color button can be pushed to easily activate a compression release for 50% pull rope resistance.

Ventilation Saw Complete Kit

1- Saw with d- ring handle installed

1- Pair safety glasses.

1- Pair ear plugs.

1- Pair gloves

1- Container 2 cycle oil

1- 1 gallon metal safety gas can

1 Dolmar service set consisting of...

1- Fuel cap

1- Starter cord

1- Combination wrench

1- Spark Plug

1- Dolmar filter set consisting of

1- Air filter cartridge

5- Pre filters

1- Dolmar guide roller

1- Set manuals

1- Carbide Chisel

Chain 16” or 20”

16” saw complete kit treadplate box $2269.00

16” saw complete kit steel box $2189.00

20” saw complete kit treadplate box $2349.00

20” saw complete kit steel box $2269.00

Cutoff Saw

Rescue operations demand fast and reliable cutting equipment. Super Vac's response is the SVC3 Power Pro Cutoff Saw, a high-performance saw designed for the fire and rescue service. The SVC3's rugged, light-weight engine turns an industrial diamond blade that's voracious enough to cut through a variety of materials including residential roofing, concrete and rebar, and sheet metal – all without the use of water. Fire and rescue features include a multi-position cutting arm, a blade safety shield that adjusts without having to fumble with hard-to-grasp knobs, a D-ring pull handle, and a manual compression release for quick starts. A water tube dust suppression system is standard.

$1540.50

SV3-14

Fast and Easy Starting:

The easy blue spot color button can be pushed easily toactiviate a compression release for 70% reduction in pull rope resistance.

The Blade:

Cuts through anything you throw at it: stone, concrete, steel, and aluminum.

Cutoff Saw Complete Kit

1- Saw with d- ring handle installed, and Tiger tooth blade installed.

1- Spare tiger tooth blade.

1- Pair safety glasses.

1- Pair ear plugs.

1- Pair gloves

1- Container 2 cycle oil

1- Gallon metal safety gas can

1 - Dolmar service set consisting of...

1- Drive belt

1- Fuel cap

1- Starter cord

1- Combination wrench

1- Fuel filter

1- Spark Plug

1- Dolmar filter set consisting of.

1- Air filter cartridge

5- Pre filters

1- Dolmar guide roller

1- Set manuals

1- Box

Complete kit with tread plate box $2379.00 Complete kit with steel box $2310.00

Saws you need Partner Saws

K-12 Rescue Saw Package

The "K-12 Package" Model is equipped with the following:

7.8 Horsepower engine

Weighing only 22.9lbs

Night Eye - A Streamlight Cyclone alkaline flashlight mounted to the bar

Carry Sling - Heavy duty, adjustable, with reflective stripe

Carbide Tip Blade - Your choice of (12") 24-Tip or (14") 30-Tip

6 pattern Flasher Warning Light - Red LED $1675.00

mounted to top

FH12FDPKG

119

You know the name...

the saw

You know

Partner Saws FD-K12

The K 1250, with an impressive 5.8 kW output, is the most powerful saw on the market. Despite the large and powerful engine, the saw is easy to handle and flexible to use. The K

1250 is a superb saw for work on large foundations, robust beams, big pipes or large roof or wall components. The Easy

Start feature ensures 50% easier starting by reducing the compression in the cylinder during starting. Self-lubricating clutch bearings for extended work life.

Partner Saws FD-K12 FD-Package

Item #

K-12

7.8 Horsepower

FHK-12FD-14 Saw Only

FHK-12FD1224 Includes 12” 24T Blade

FHK-12FD1430 Includes 14” 30T Blade

Price

$1625.00

$1685.00

$1710.00

7.8 HP

Partner Saws FD-960

The new K 960 is a big step forward in the development of power saws. The K 960 is the latest and most powerful saws, featuring the revolutionary new DualCharge engine technology.

DualCharge dramatically reduces emissions, compared to earlier engine generations. And even though the K 960 is based on the well-known K 950, the improvements are so extensive that it an entirely new saw. The K 960 is a unique machine, in a class of its own when it comes to emission levels, efficiency and manoeuvrability. The Easy Start feature ensures 50% easier starting by reducing the compression in the cylinder during starting. Selflubricating clutch bearings for extended work life.

P

M

E

N

T

E

Q

U

I

Partner Saws FD-960 FD-Package

Get the complete FD-960 saw package. Our "Package" includes Chrome Guard, blade, wrench with

$1575.00

holder, Night Eye light and

FHFD960PKG shoulder strap with a reflective stripe.

Item #

K-960

6.1 Horsepower

FHK-960-14 Saw Only

FHK-9601224 Includes 12” 24T Blade


Partner Saws FD-750

Item #

K-750

5 Horsepower

FHK-750-14 Saw Only



Price

$1060.00

$1685.00

$1710.00

Partner Saws FD-750 FD-Package

$1430.00

Get the complete FD-750 saw package. Our "Package" includes Chrome Guard, blade, wrench with holder,

Night Eye light and shoulder strap with a reflective stripe.

FHFD750PKG

Price

$1375.00

$1440.00

$1465.00

5.0 HP


P

M

E

N

T

E

Q

U

I

120

12” blade 12 tips

$65.00 each

FHCBT1212

Pro Series

Saws Blades

Blades you need

Wood Cutting Carbide Tip Blades

“The Chopper”

12” and 14” diameter blades with 1” arbor.

Adapters are also available in 7/8” or 20mm.

The 12 tip and 24 tip blades are only available for the 12” blades and the 30 tip blade is on available for the 14” blade. Please remember to specify your arbor size when ordering.

12” blade 24 tips

$75.00 each

FHCBT1224

14” blade 30 tips

$100.00 each

FHCBT1430

Steel and Concrete Blades

These blades are Supreme

Triple Reinforced Composite

Blades (Aluminum Oxide)

Available in 12-inch & 14-inch

Choose Steel or Concrete

Blades

FH12SCB112 12” Steel Cutting Blade 1” arbor

FH12CCB112 12” Concrete Cutting Blade 1” arbor

$11.75

$11.75

FH12SCB7812 12” Steel Cutting Blade 7/8” arbor $11.75

FH12CCB7812 12” Concrete Cutting Blade 7/8” arbor $11.75

FH12SCB2012 12” Steel Cutting Blade 20mm arbor $11.75

FH12CCB2012 12” Concrete Cutting Blade 20mm arbor $11.75

FH12SCB114 14” Steel Cutting Blade 1” arbor

FH12CCB114 14” Concrete Cutting Blade 1” arbor

$15.00

$15.00

Diamond Tip Steel and Concrete Blades

Super Series Ultimate Series

FHPRO12 12” Pro Series Blade

FHPRO14 14” Pro Series Blade

$150.00

$175.00

FHSUP12 12” Super Series Blade $200.00

FHSUP14 14” Super Series Blade $225.00

FHULT12 12” Ultimate Series Blade $300.00

FHULT14 14” Ultimate Series Blade $375.00

These Diamond Tip steel and concrete cutting blades have been design to give you the very best in cutting performance.

Choice from the good Pro Series, the better Super Series or the best Ultimate series blades. They are available in 12” or 14” diameters.

Sabre Tooth Diamond USAR Blade

FHSTB12 12” Blade $275.00

FHSTB14 14” Blade $325.00

FHSTB45 4.5” Blade $95.00

This exceptional diamond blade has been specifically designed for Urban

Search & Rescue (USAR) teams because it will cut any material. It is specifically crafted to reduce heat during the cutting process.

Blade for blade, the ratio is 100:1 of a normal steel (aluminum oxide) or a concrete (silicon oxide) blade.

Cuts any material. Especially works well in cutting metal - locks, bars, concrete, steel, roll-ups, car posts and any material found in a forcible entry situation.

The 4.5 inch blade can be used with a battery operated grinder to cut hurricane glass found in coastal buildings or just locks, bars or anything in limited spaces.

The cutting surface of this blade is made with diamonds, carbide and tungston (a heat and corrosive resistant material). It makes the blade almost indestructible when cutting any material. This blade is a forcible entry MUST, along with a light weight saw such as the Partner K-750, 12inch model.Can be used on any power saw and has a double arbor size

20mm with a knockout to 1 inch. Available in 4.5", 12" and 14"

Tiger Tooth Diamond Blade

NEW and UNIQUE all purpose blade - will cut any material. The ratio is 100 to 1 of a normal steel (aluminum oxide) or a concrete (silicon oxide).

Cuts any material found in the fire service.

Locks, bars, concrete, steel, roll-ups, car posts and any material found in a forcible entry situation.

The 4.5 inch blade can be used with a battery operated grinder to cut hurricane glass found in coastal buildings or just locks, bars or anything in limited spaces.

Made with diamond, tunsten and carbide mixture. It makes the blade almost indestructible when cutting any material. A forcible entry must along with a light weight saw such as the

Partner K-750, 12-inch model.

FHSTB12 12” Blade $275.00

FHSTB14 14” Blade $325.00

FHSTB45 4.5” Blade $95.00

Saws you need

Partner Saws

121

K-950 Concrete Cutter Saw

The K 950 Chain engine is based on the popular K 950 and includes all of its technical and ergonomic advantages. With a concrete chain saw you get better access in tight situations. You get sharp corners without over cutting and can make up to 15” deep cuts from one side. This makes the concrete plunge saw a perfect complementary cutter where the first cut are made with a conventional cutter with a blade. Easy Start

Ensures 50% easier starting by reducing the compression in the cylinder during Active Air Filtration™

$2415.00

Centrifugal air cleaning in three stages increases service life and extends the intervals between services..

FHK950CC

Saw Utility Box Partner Saw Field Kit

This utility box is a full

* Saw Belts

This partner saw field kit is a great option to have for any or compartmentized utility box saws...

all of your that can store 20+ blades, supplies used for power partner gas can, filters, and any other saws. The kit includes -

(2) Abrasive

Blades,

* Oil Goggles,

* Spark Plugs Hearing

* Sta-Bil Protection,

* Tools Gas Can,

$185.00

Dust Mask,

Can of STA-

FHSUB B, 2-Cycle Oil, Spare Belt, Air Filter, and Foam

Filter

$150.00

FHSFK

The Fire Tuff Chain Saw

This saw is made to tackle any chain saw operation.

* Exceptional forestry application.

* New X-TORQ engine provides high torque over a very wide

RPM range.

* Low exhaust emission levels, in accordance with EPA #2.

* Durable and robust saw body, cast three piece crank shaft and reinforced crankcase.

* Ergonomically improved handles reduce fatigue.

* Air injection makes the saw run stronger and longer.

* Smart-Start and purge pump provides east starting.

* This saw is make for multiple rough ON and OFF operations.

* Weighs a perfect 12 lbs. of weight distribution.

P

M

E

N

T

E

Q

U

I

The FIRE TUFF comes with these additions...

* A powerful 3.5 horsepower engine

* Bar and Chain Included - 18-inch bar with chain to handle any operations

* Orange Powerbox carrying case that protects and holds saw and equipment in a secure fit by using the exclusive "Leash

System"

* Reflective saw shoulder carrying sling

* Wrench holder attached to handle for on the scene adjustments

* Large D-handle for glove friendly pull starts

* Saw scabbard for safety, chain protect on and attachment of our reflective shoulder strap

This includes the case, saw, reflective carry strap, chain cover

$425.00

FHFTC


P

M

E

N

T

E

Q

U

I

122

Saws & Breakers

Gasoline Power Saw with 20 mm Arbor

Unique piston provides outstanding performance

These portable cut-off saws (BTS series) prevent piston jamming and are thus unbeatable when it comes to performance and economic efficiency. Their extreme ruggedness is based on the unique "L3" piston; the name L3 refers to "Long Life Lubrication". The innovative air cleaner design and the improved engine cooling system provide for added reliability.

Item# Description Price

The BTS series offers the

BTS930L3 4.5 Hp Saw only 12” Blade $939.99

highest power to weight

BTS935L3 4.5 Hp Saw only 14” Blade $956.99

ratio of their class plus outstanding ergonomic features.

BTS1030L3 7 Hp Saw only 12” Blade $1018.99

BTS1035L3 7 Hp Saw only 14” Blade $1036.99

The "Long Life Lubrication“ L3 piston has been furnished with a special graphite surface coating to eliminate piston and cylinder overheating even during tough continuous operations. This special coating also provides protection against dirt and reduces the need for lubrication

Units feature an operator-friendly air cleaning system where the air flow is such that the dust is automatically shaken off the preliminary filter through the machines own vibration. Plus the 54 % larger filtering surface of the air cleaner noticeably increases the filter's service life.

The increased cooling air supply optimizes the engine's protection against overheating.

The starter rope has been treated with silicone, thus providing added protection against rope damages for rugged operation

The blade guard can be adjusted effortlessly and infinitely by hand, thus allowing for quick and easy set-up times.

Low Vibration Electric Breaker 115V

These electric universal breakers can be used, in addition to breaking up and demolition work, for driving in earthing rods as lightning conductors, driving in piles using special hoods, and ramming in probes to obtain soil samples for geological purposes and environmental soil examinations. The telecommunications construction sector, and fencing/tent building companies are also frequent

EH27

users of this type of equipment.

Driven by a powerful tried and tested electric universal motor with protective insulation for connecting directly to the mains.

A specially designed protective hood, which is made of shock-resistant plastics, ensures excellent cooling of the motor as well as ensuring good noise suppression.

The vibration-damped handles and, in particular, the almost recoilless air-cushioned percussion system, ensure a practically vibration-free operation.

Thanks to the optimum spring mounting of the three operating handles and the complete engine protective hood this machine is suitable for long periods of operation.

All types of accessories are available, see our website for a full description.

Only

$1647.99

Only

$1199.99

EH9BL

The innovative magic drilling and chiseling hammers save money because they lose no time due to maintenance and failures: The three-phase AC motor means that there is no changing of worn-out carbon brushes. Failures due to burnt-out windings in the rotor of the motor are likewise a thing of the past. On the other hand, the built-in frequency inverter is a very useful feature, since it means that magic electric hammers can be plugged in to a standard mains socket.

No wear at all: non-contact rpm setting. Consistent and concentrated performance in hard and soft materials due to the new high-tech percussion system.

Undoubtedly safer operation for the user due to the unique built-in converter: automatic voltage-matching protects against under- and over-voltages.

The work becomes less tiring thanks to the individually adjustable Pro-Ergo® handle system: Quick and easy shifting of the holding position during the work means more can be done in the same time.

Optionally can be equipped with SDS-max (BLM) or hexagonal tool shank (BL).

All types of accessories are available, see our website for a full description.


Lighting the Way!

Scene Lighting

LumiNite 360 Degree of Clear Lighting

123

The Luminite is designed to fill the temporary lighting needs for events, construction, emergency responders, recreation and where you need lighting without transporting those big light trailers. The unit comes in a fiberglass case for transportation and storage and fits in the trunk of a car. Simply remove the lid, plug in tower to 110V or a generator, turn fan on and the tower is filled with air via a built-in fan in less than a minute to give you a 15 foot tall tower. The light source is a 875 watt metal halide bulb that reaches full brightness after about 5 minutes. The unit is so quiet you can stand beside the unit and carry on a normal conversation.

The tower body is made of a light weight ripstop material that acts as a light tube to give off a very even matt lighting. The quality of the light is easy on the eyes and excellent for reading or work.

P

M

E

N

T

E

Q

U

I

The Luminite is a light source that will light up to 100,000 square feet anywhere that can be easily transported in the trunk of a vehicle and deployed by one person.

The light is a crisp clean light, which is great for crime scene operations.

The Luminite light collapses to only 2 feet for easy carry and storage (2 ft x 1.5 ft x 1.5 ft)

Great ground stability

Only

$4,999.99

This light is used by Police, Fire, Emergency Departments, First

Responders, Road Construction, Any type of Night works,

National Defense - Homeland security, Utility Companies,

Rental business, Pavement Crews, Studios, Public Works

Departments and more!.

Why settle for one direction lighting where you need more than one unit, choose the light that gives you

360 degrees of clean bright light.

Available in Red, Blue White,,Yellow, Black

Custom Name imprint Available at no additional cost


124

P

M

E

N

T

E

Q

U

I

Ask about

FREE shipping

Light Towers & Light Balloons

400 Watt Light Tower

Compact, heavy-duty light towers provide exceptional lighting

Heavy-duty, trailer-mounted light towers feature a compact and narrow body design for easy transport - two abreast a on flatbed truck. Distinctive elliptical light fixtures allow light to travel directly to the work area for brighter illumination. Each light can be individually adjusted without tools and a quick disconnect power cord allows for easy removal prior to transport. The 360-degree rotating mast allows for light adjustment while raised.

Large capacity fuel tank allows for 68 hours of continuous lighting/run time.

A lockable, weather protected, powder-coated steel enclosure protects components from the elements. Zinc/dichromate treated mast and lamp mounted bar provide superior corrosion resistance.

Four 2,000 lb. rated zinc-plated leveling jacks provide easy leveling and stability on uneven terrain and in windy conditions.

Control panel features an elapsed hour meter and a convenient 120V GFCI receptacle with circuit breakers for additional power. Separate engine control panel with full diagnostics for engine protection and operator convenience.

Reliable 1800 rpm diesel engine offers glow plug preheat system for long service life and easier cold weather starting. Automatic engine shutdown protects the engine from damage due to low oil pressure and high coolant temperature.

Fully equipped highway-ready trailer offers combination pintle/ball hitch, 13-inch tires, four tie-downs, DOT lighting, VIN number and chains.

Price

$ 9,299.99

$10,403.99

$10,203.99

$11,041.99

LTC4L

Item#

LTC4LPW

LTC4C

LTC4CPW

Description

Light Tower with Lombardini Diesel Engine

Light Tower with Lombardini Diesel Engine with a Power Winch

Light Tower with CAT Diesel Engine

Light Tower with CAT Diesel Engine with a Power Winch

1000 Watt Light Balloon

The light balloon offfers optimum, glare-free working conditions

WACKER’s LB 1 light balloon features a compact design providing optimal brightness without glare. Ideally suited for general job site illumination, road work, indoor illumination of concrete pours and party rentals. WACKER’s light balloon features rugged, simple construction allowing for use almost anywhere a reliable light source is needed. A powerful and portable package to light your job site!

A simple, one-step mechanical balloon opening system eliminates noisy fans and balloon holds its shape even in wind or if fabric is torn.

The balloon's heavy duty, translucent, white rip stop nylon allows diffused bright light from the metal halide lamp to be evenly distributed onto the work area for a consistent, reliable lighting solution.

Reflective aluminum coated upper balloon made of tough kevlar fabric reflects light downward maximizing lumen output at ground level.

The rugged three-section, telescoping, stainless steel tripod can be raised up to 13.5 feet for optimal light coverage.

Set up of the fully operational light balloon is quick and easy with minimal pieces and simple assembly. This compact package makes for easy storage and transport.

Carabineers for tie down or stakes through tripod legs offer two anchoring options for security and stability of the light balloon system.

Only

$2,999.99



$229.99

FF930-300

$239.99

FF930-310

Tac-Fire Flashlight

Flashlights

Lighting Technology from FoxFury

Tac-Strobe Flashlight

125

HammerHead Series

2 CREE XR-E LEDS

Waterproof, Impact and Fire Resistant

Runs on 3 CR123 Batteries

Battery Life: 2 to 8 hours at Full Power

Highly stylized design, making its appearance strikingly different than most flashlights. The intense machining details add to the overall effect.

Combination of emission angle (8°) and intensity (320 lumen) makes it adequate for: short, medium, and long distance viewing.

Weight = 8.6 oz Length = 7.0" (178 mm)

Head = 2.2" x 1.5" Handle (Diameter) = 1.1"

Housing Material = Aluminum 6061-T6 Hard Anodized

E

Q

U

I

P

M

320 Lumen LED Black Flashlight for Law Enforcement and Military with

Turbo Strobe

Configured with 2 CREE XR-E LEDs

Fire and Impact Resistant

Lightweight and Waterproof

Highly stylized design makes the appearance strikingly different than most flashlights. The intense machining details add to the overall effect.

Combination of emission angle (8°) and intensity (320 lumen) makes it ade-

E

N

T quate for: short, medium, and long distance viewing.

Turbo-Strobe feature proves very disturbing to those looking into the light --

meant for use by Law Enforcement and Military. Weight = 8.6 oz

Length = 7.0" Head = 2.2" x 1.5"

Handle (Diameter) = 1.1" Housing Material = Aluminum 6061-T6 Hard anodized

Scout Tactical II

Scout Narcotics Evidence Identification Light

$34.99

Includes 2 Ultrabright White LEDs for enhanced distance and peripheral vision

Designed for Extreme Durability

Multiple Wear/Use Options: handheld, belt or pocket worn, clipped to a carabineer or resting on its side or back

Waterproof

Fire Resistant

FF300-010

Impact Resistant

Candle Power = 280

Lumens = 22.2

Field of Vision = 35°

Distance Vision = 40 -

50 ft

Peripheral Vision = 10 ft

TX-2 Clip Light Black

$20.99

Black 2 LED Clip Light that clips to a pocket, clipboard, belt and many other surfaces

Designed for Police, Fire and

FF600-500

Medical Professionals. Versatile

LED light with a clip enabling hands-free use. The light is able to swivel up and down and there are two different light intensities to enable control over the direction and amount of light.

Meets NFPA Fire Resistant Requirements--

500°F (260°C) for 30 minutes

$149.99

FF300-200

Powerful Search Tool to Search for Street

Narcotics

Detects small amounts of Marijuana,

Methamphetamines, Cocaine, Heroin,

PCP and other substances

Field of Vision = 20°

Distance Vision = 3 ft

Total Weight = 4.3 oz

Light = 3.7 oz

Clip = 0.6 oz

Size = 2.15" x 0.85" x

3.75" Must be used in conjunction with

Orange Goggles which are included

TX-3 Clip Light

FF600-600

$22.99

Belt/Epaulet worn LED light for

Law Enforcement, Search and

Rescue, Safety and Fire

Applications

Flashing Red Rear LED for

Increased Safety Light Swivels up and down, left and right allowing the user to aim and adjust the light where needed

Meets NFPA Fire Resistant Requirements--

500°F (260°C) for 30 minutes

Waterproof, Impact and Fire Resistant


P

M

E

N

T

E

Q

U

I

126

Helmet/Head Lights Lighting the Way!

Lighting Technology from FoxFury

$48.99

Helmet Lights

Command-10

FF410-006

Slim, Lightweight 10 LED Headlamp fits nearly every

Fire helmet with a Visor or Face Shield

3 modes with variable light output and a Flashing

Rear Red LED for enhanced safety and visibility

Water Proof, Fire Resistant and Impact Resistant

Fits nearly every Helmet with Visors or Face Shields

Meets NFPA Fire Resistant Requirements

$68.99

Command-20

FF420-006

Lowest Profile, Lightweight 20 LED Headlamp fits

99% of Fire helmet with a Visor or Face Shield

3 modes with variable light output and a Flashing

Rear Red LED for enhanced safety and visibility


Fits nearly every Helmet with Visors or Face Shields


Performance

Powerful 24 LED Headlamp with Ultrabright LEDs and an

Adjustable Beam Angle

Provides Distance and Peripheral Vision and helps cut through smoke and fog Water Proof, Fire Resistant and Impact Resistant

4 Ultrabright LEDs in Center for Enhanced Focused Vision

Fits Most Helmets with Visors or Face Shields

Meets NFPA Fire Resistant Requirements $81.99

FF400-006

Performance Intrinsic Safe

$112.99

Fire Resistant Helmet Light for Hazardous Environments, including

Structural Firefighting, Chemical Plants and HazMat

UL 913 Certified:

Class 1, Division 1 Groups A-D, T6


The only headlamp in the world that is UL 913 Certified Intrinsically

Safe for Hydrogen and Acetylene Environments

Fits Most Helmets with Visors or Face Shields

Meets NFPA Fire Resistant Requirements FF400FF4175

Signature Fire Headlamp

24 Powerful LED lights

Fire Resistant Headlamp with Peripheral Lighting Designed for Structural Fire Fighting as well as

Wildland Fire Fighting

Comes with Autodim Sensors to Minimize Eye Strain

Fits Helmets without a Visor or Face Shield


Meets NFPA Fire Resistant Requirements $112.99

FF200-026

$111.99

Signature Intrinsic Safe Headlamp

FF200FF2615

Fire Resistant light for Hazardous Environments including Structural

Firefighting, Chemical Plants and HazMat

Class 1, Division 1 Groups C-D, T6


T6 Temperature Rating--the highest possible

Fits Helmets without a Visor or Face Shield



It was amazing to see the difference between a big ed and your lamp which put out a much stronger beam of light.

Bryan

Selma Fire Department (CA)

The LED unit we all had on our helmets is the best thing yet for the fire service. On behalf of myself and my fellow firefighters we thank you.Steve

Mt Arlington, NJ

Lighting the way!

Handlights/Flashlights

127

The Toughtest Handlights in the Industry

The Daylighter FD-1 The Firefighters Choice

The Daylighter AL2000 is a high-intensity industrial grade rechargeable handlight. The AL2000 is powered by a state of the art 6 volt sealed lead battery and a

GE halogen sealed beam. The rugged, weatherproof and impact resistant AL2000 delivers up to 60,000 candle power. The AL2000 features a full size handle, a heavy duty wire stand, nickel plated brass charging contacts, a full length adjustable strap, one-piece waterproof housing, rubber-coated internal electrical connections, self cleaning push-button switch $69.00 each and a heavy-duty rubber bezel.

AL200

The FD1 is a high-intensity firfighter grade rechargeable handlight that is specifically designed for Firefighters.

The FD1 is powered by a 6 volt sealed lead battery and a GE halogen sealed beam.

The rugged and impact resistant FD1 boasts a blinding (60,000 peak cp) beam of light for up to 4 hours. The FD1 features full size rubber handle grip with a 1-1/2 inch wide adjustable carry strap with quick-disconnect buckle. The FD1 is also equipped with solid brass charging contacts, one-piece weatherproof housing, rubber-coated internal

$109.00 each electrical connections, self cleaning push-

FD1

M

E

N

T

E

Q

U

I

P

Nightsaber The Choice of ESU Officers Titan The Choice of Haz Mat Units

The AL5000 Nightsaber is a highintensity industrial grade rechargeable handlight that provides remarkable performance in

Firefighting, Police, Security, and many other industrial applications. The AL5000 is powered by a state of the art 6 volt sealed lead battery and a GE halogen sealed beam. The rugged, weatherproof and impact resistant AL5000 delivers up to

60,000 candle power. The AL5000 features full size leather wrapped handle with built-in

$99.00 each

AL5000 eyelets to accept a two-inch wide full-length adjustable carry strap.

The Titan is a high-intensity industrial grade rechargeable handlight that is specifically designed for the most demanding Emergency

Service personnel. The Titan is powered by a state of the art 6 volt sealed lead battery and a GE halogen sealed beam. The rugged, weatherproof and impact resistant Titan boasts a blinding (60,000 peak cp) beam of light for up to 4 hours and is Hazardous

$109.00 each

TITAN location suitable for Class 1, Division 2,

Gp. A,B,C,D,T4.

Add a Charger for your Light

Add a charger for your handlight. Choose from a home charger, 110 volt, a car charger, 12 volt

DC, or a combo charger. You choose 12 volt or

110 volt.

AL12VC 12 volt DC charger $50.00

AL110VC 110 volt AC charger $50.00

AL11012C Combo 12 volt/110 Volt $60.00

All lights are available in any of the colors below

Sidekick AL90R w/Charger

The AL90R is a commercial grade high intensity right angle flashlight. The AL90R Sidekick is constructed to rigid U.S. military standards. These requirements include: A high impact water-proof ABS body, 3 position switch, and a steel reflector assembly. The AL90 is powered by a single Nicad battery stick which in turn operates a high intensity (15,000 cp) halogen bulb. The NiCad

$117.00 each battery stick can be charged in 8 hours and has a life expectancy of approximately

1050

1000 cycles.


P

M

E

N

T

E

Q

U

I

128

Personal Strobes from Tek-Tite

MARK-Lite Xenon Strobe

Only

TT1A19004

$34.49

World's Smallest Submersible Strobe

This personal-sized Xenon strobe will operate for 6 hours on 1 AA alkaline battery or 10 hours on a Energizer® e2® Lithium battery. Use it for diving, fire fighting, mountain climbing or emergency marine use. Visible for more than 1 mile at night at the surface. Available with your choice of 4 lens colors.

Clear, Amber, Blue, Red, Green, Yellow.

Comes with a Velcro strap.

MARK-Lite Firefly

TT2N15004

Only

$21.49

The latest development in sub-miniature LED technology makes the Mark-

Lite Fire Fly possible. Its five eyecatching red LEDs operate for an incredible 100 hours on a single set of

2 N-size alkaline batteries—with an operating cost of about 2 cents/hr.

The Mark-Lite Fire Fly is the perfect marker light for people active in the dark. Use one for night scuba diving, or while biking, jogging or walking. Comes with a Velcro strap.

MARK III- 4 LED

Lights

Only

TT3A5200414

$26.49

The Chemical Lightstick Alternative®

The brightest marker light available.

This version of the Mark III is powered by 4 LEDs and is designed for situations where higher ambient light requires a high-intensity light.

The Mark III is also well suited for use as a traffic marshalling wand or area light. Available in your choice of four lens colors. A bungee lanyard is included. Choose Clear, Green

Yellow Red for your lens color.

Expedition Luxeon Star LED Flashlight


MARK-Lite

Only

$11.49

TT1A11004 The Chemical Lightstick Alternative®

Tired of throwing away chemical light sticks after every use? Our Mark-Lite is The Original battery operated submersible marker light. Use one in the dark in place of a chemical lightstick while scuba diving, camping, jogging or and biking. Every Mark-Lite features a reliable, twist-on switch and use 1 AA battery lasts hours—with an operating cost of less and

20 cents/hr. Save money while helping keep our environment and oceans clean. Available in your choice of four popular lens colors. A bungee lanyard is included

Choose Clear, Green Yellow Red for your lens color.

TT3C95004

Only

$52.49

Building off the success of our acclaimed Expedition series, the

Expedition Star introduces the latest in LED technology—the Luxeon Star

LED. Military tested tough. The same model as supplied to the military. This

Luxeon Star LED flashlight utilizes specialized optics to produce an ultratight 10-degree beam pattern, with a light output equivalent to more than 20 regular LEDs. This

"spot" beam pattern enables the Expedition Star to cut through fog and smoke. Burn time is 15+ hours at full power with an additional 50 hours of usable light. Double Oring seals give this waterproof light an underwater depth rating of 500 feet. Comes with an adjustable, cushioned wrist lanyard and rubber glare guard

STROBE 200

Only

$50.99

TT2C71004

The Best Strobe Anywhere!

Our Xenon strobe has nearly twice the burn time and is 30% brighter than competing strobes. Used by scuba divers, military and fire fighters worldwide. This double O-ring sealed unit will run 30+ hours on a set of batteries and can be seen for miles at night. Optional colored lenses, including infrared (IR), are available and a Velcro strap is included. RoHS compliant for sale to European

Union.Choose Clear, Green Blue, Red for your lens color.

AC5161RD

AC5161WH

AC5161YL

Glow Wand Attachments

Our Glow Wand allows you to turn our

Trek, Expedition and Excursion flashlights into a traffic marshalling wand or area light.Union.Choose Red,

White or Yellow for your lens color.

Red

White

Yellow

Only

$3.50

The Original Trek 2

Only

$20.99

The Original LED Flashlight

Our most popular light. The Trek 2 is the perfect toolbox, backpacking or emergency light. Each provides more than 40 hours of light from 3 AA alkaline batteries

TT3A41004 plus 160 additional hours of usable light. This 2 LED flashlight is an extremely rugged, we tried to destroy one in our Tank Torcher Test.

The Trek will never need a bulb replacement since its twin ultra-bright LEDs last 10,000+ hours. Double O-ring seals give this waterproof light an underwater depth rating of

1,000 feet. Comes with a bungee wrist lanyard and


It’s a Snap!

Snap Lights

Special Purpose Lighting

129

When your safety depends on light, remember that Cyalume® is the name trusted millions of times every year. With extended shelf lives guaranteed in writing, Cyalume is the one to reach for first.

Cyalume's 15 inch Chem-Lights® offer 360° of illumination. They are foiled, wrapped for light/moisture protection, visible up to 1 mile, maintenance free, non-toxic, non-flammable, and waterproof.

Applications: DZ/LZ markers, traffic control, route markers, vehicle marker lights disabled vehicle flare. NSN approved with a wide range of uses.

4/5 sticks per pack for a total of 20 sticks.

Available in Green , Orange , Blue , Yellow, Red and White.

Infrared is also available, call us for pricing.

(*) Items are made to order. May require up to 60 days for delivery.

CY987150

CY987100

CY987130

CY987090

CY987110

Ultra Orange

Blue

White

Green

Yellow

$172.99

$172.99

$172.99

$172.99

$172.99

CY987120 Red $172.99

Cyalume's 10 inch Chem-Lights® offer

360° of illumination. They are foiled, wrapped for light/moisture protection, maintenance free, non-toxic, non-flammable, and waterproof.

Applications: DZ/LZ markers, traffic control, route markers, vehicle marker lights disabled vehicle flare.

Packed in units of 4 packs of 10

Available in Green , Yellow, Red

(*) Items are made

CY92704901

CY92703001

Green

Yellow

$137.49

$137.49

to order. May require up to 60 days for delivery.

CY92704701 Red $137.49

Cyalume Technologies is the sole provider of lightbars to the United States Military, NATO,

FEMA and the Red Cross. Now, public safety officials can benefit from this very same From crime scenes to fires to HAZMAT spills, power outages, severe weather, evacuations, or motor vehicle breakdowns and crashes, being able to quickly see what is going on is an essential step to providing public safety. Safe to use in HAZ-

MAT emergencies - SnapLights® resist corrosive chemicals, are flameless and will not ignite fire or explosion. A versatile tool for any emergency situation, the batons provide excellent light projection through smoke and darkness.

P

M

E

N

T

E

Q

U

I

Cyalume's 6 inch Chem-Lights® offer 360° of illumination. They are foiled, wrapped for light/moisture protection, maintenance free, non-toxic, non-flammable, and waterproof. This is our most popular line of products.

Applications: Fire fighting / DC, UNREP, Maintenance/ refueling ops, Vehicle identification markers, Helicopter ops, IR for covert ops.

NSN approved with a wide range of uses.

Packed units of 10

CY908015

CY908013

Orange

Blue

$11.99

$11.99

CY908016 White $11.99

Available in Green , Orange , Blue , Yellow, Red

Infrared is also available, call us for pricing.

(*) Items are made to order. May require up to 60 days for delivery.

and White.

CY908011 Green

CY908014 Yellow

CY908012 Red

$11.99

$11.99

$11.99

Cyalume's Accessories capture, hold, and contain Chem-Lights® for ease of use.

Magnetic base: holds 6, 10 or 15 inch Chem-Lights and will hold the Chem-Light to any metal object.

$18.49 pack of 5 CY927092

Light shield: holds 6 inch Cyalume Chem-Lights® and controls the amount of light that can be seen. $2.29 each -CY906370

Handle: holds 6, 10 or 15 inch Chem-Lights® for flexibility in signaling and controlling traffic.

$20.49 pack of 5 CY33450

Traffic Cone Adapters: These will slide onto any traffic cone to mount a

Chem-Light-

$19.49 pack of 5 - CY927103

NSN approved


P

M

E

N

T

E

Q

U

I

130

PPV Fans Get The Smoke Out

Gas Powered PPVs

All Super Vac PPV’s feature a cart style design with large rear mounted tires and a flip-up full height, full width handle for easy maneuverability. They feature the exclusive Super Vac lever action tilt, with positions of 20°, 10°, 0° and –10° and a locking step brake to make set-up lightning fast. The textured chip resistant powder coating is baked on to guaranty a finish that is as tough as the rest of the fan. All Super Vac PPV’s feature third party verified airflow tested to AMCA 240-96 and can easily be used with other Super Vac fans in the “V” attack configuration

16" Model 716G4

The 716 is designed to compact dimensions that fiRst t the tightest pumper compartments.

An excellent choice when light weight and low cost are critical in your district.

30" Model 730G4

The most powerful portable fan in the fiRst re service. This fan is ventilating larger occupancies. Perfect for the department with large a serious workhorse to make quick work of commercial structures in their district.

18", 20" & 24" Models

The most popular sizes in the industry and the perfect combination of small size and high power. They feature the highest horsepower in their class for maximum airfl ow.

Perfect for the department with a mixture of residential and small commercial structures in their district.

MODEL #

SV716G4H

DESCRIPTION

16” Fan, 4 Hp Honda Engine

PRICE

$1521.00

Model GP164S

The

GP164 is the smallest

SV716G4B

SV718G4H

SV718G4T

SV718G4B

16” Fan, 3.5 Hp Briggs Engine

18” Fan, 6.5 Hp Honda Engine

$1209.00

$1911.00

18” Fan, 6 Hp Tecumseh Engine $1560.00

18” Fan, 6 Hp Briggs Engine

SV720G4H 20” Fan, 6.5 Hp Honda Engine

$1560.00

$1989.00

SV720G4T 20” Fan, 6. Hp Tecumseh Engine $1677.00

gasoline

SV720G4B 20” Fan, 6. Hp Briggs Engine

SV724G4H 24” Fan, 9 Hp Honda Engine

$1677.00

$2379.00

powered fan in the industry. The versatile design

SV724G4T

SV730G4H 30” Fan, 13 Hp Honda Engine features the ability to SVGP164S attach duct to the inlet or outlet

24” Fan, 9 Hp Tecumseh Engine $1911.00

$3003.00

16” Fan PPVor NPV, 4 Hp Engine $1287.00

side of the fan. An excellent choice wheen size and versatility are required in your district

The E2 models featurea tough, no frills method of supplying clean air to a structure. Perfect for the department buying their first electric PPV or when budgets are tight.

Electric Powered PPVs

The power comes from your choice of Standard, Variable Speed or Hazardous

Location electric motors. All units are designed to provide the maximum airflow out of a

1 Horsepower motor that can be safely plugged into any standard 15 amp wall socket.

These motors come with a factory approved two year warranty. The rest of the fan is covered by Super Vac’s five year warranty. The direct drive system eliminates belts and pulleys for years of trouble free operation.

The VR2 series features rheostat control of speed function. Will operate on

GFI circuits

The EXP models feature a conductive, aluminum blade for the highest level of explosion protection in the industry. Perfect for the department that wants to be able to use their electric PPV for all types of ventilation situations.

The VS2 series features digital control of fan speed with a reversing function.

Note: Not for use on

GFI circuits.

MODEL # DESCRIPTION

SV716E2 16” Fan 1 Hp 1725 RPM

PRICE

$1287.00

SV716VR2 16” Fan, 1 Hp Variable Speed, Reostst $1716.00

SV716VS2 16” Fan, 1 Hp Variable Speed $1716.00

SV716EXP 16” Fan 1 Hp, Hazardous Location $1599.00

SV718E2 18” Fan 1 Hp 1725 RPM $1599.00



SV718EXP 18” Fan 1 Hp, Hazardous Location

SV720E2 20” Fan 1 Hp 1725 RPM

$1833.00

$1677.00



SV720EXP 20” Fan 1 Hp, Hazardous Location

SV724E2 24” Fan 1 Hp 1725 RPM

SVVS2 24” Fan, 1 Hp Variable Speed

$1911.00

$1755.00

$2106.00

SV724EXP 24” Fan 1 Hp, Hazardous Location $1989.00

Get The Smoke Out Ventilation Fans

Smoke Ejectors

131

Smoke ejectors come complete with all of the features that make Super Vac the most respected name in emergency ventilation.The heart of these units is the patented, cast aluminum, 4 blade, recurve propeller designed specifically for smoke ejection. Poured in Super Vac’s foundry of the toughest aircraft alloys, the blade is the perfect combination of a low noise, high output design.

Model P164

The P164 is the most popular unit in the fire/rescue service.

It is the perfect combination of high airflow and easy to handle size. The single most popular fan in the history of the fire service.

P164

P244

Model P244

The P244 is the largest smoke ejector available. Perfect for the department that has a mix of large residential and mid-sized commercial buildings in their response area.

Note: Requires a 20 amp circuit to start and run.

Model P200

The P200 is capable of bigger ventilation tasks and higher airflows. At 1 horsepower it will run on standard 15 amp household circuits. Perfect for the department that has a mix of residential and commercial buildings in their jurisdiction.

Model P124

The P124 is designed for high powered air movement in a compact size. Turning at 3500 rpm the fan is small but mighty. Perfect for the department that wants to eject smoke and have a small unit for confined space ventilation.

and commercial buildings in their jurisdiction.

P124

MODEL #

SVP124

SVP124SE

SVP164S

DESCRIPTION

12” Fan with 1/2 Hp Electric Motor

12” Fan with 1/2 Hp Explosion Proof Electric Motor- 3450 RPM Good For Haz Mat

16” Fan with 1/3 Hp Electric Motor

SVP164SAL 16” Fan with 1/3 Hp Electric Motor Aluminum Body

SVP164SE 16” Fan with 1/3 Hp Electric Motor Explosion Proof Motor

SVP164SEAL 16” Fan with 1/3 Hp Electric Motor Aluminum Body Explosion Proof Motor Good For Haz Mat

SVPP2000S 20” Fan 1 Hp Electric Motor

SVP200SAL 20” Fan 1 Hp Electric Motor Aluminum Body

SVP200SE 20” Fan 1 Hp Electric Explosion Proof Motor, Good For Haz Mat

SVP200SEAL 20” Fan 1 Hp Electric Explosion Proof Motor, Aluminum Body Good For Haz Mat

SVP244S

SVP244SE

24” Fan 1 1/2 Hp Electric Motor

24” Fan 1 1/2 Hp Electric Explosion Proof Motor, Good For Haz Mat

Model HF164

The HF164 is the most powerful 16” fan in the industry and can easily be used for negative or positive pressure ventilation. Running at

3500 rpm, it has the power to force or pull air deep into a structure or underground vault.

Note: Requires a 20 amp circuit to start and run.

MODEL # DESCRIPTION

HF164 16” Fan 3450 RPM Motor

PRICE

$1287.00

HF164E 16” Fan 3450 RPM Explosion Proof Motor $1677.00

$156.00

Our Door

Bar allows you to hang a

Super Vac with hang-

SVDOORBAR ers, in any doorway at the height you choose. It weighs only thirteen pounds, it’s extremely easy to install, and it releases instantly with a handy trigger.

$74.99

SVHR

SV16FS

This bracket easily retrofi ts onto an existing

12" or 16"

Super Vac smoke ejector.

It allows for quick setup and the tilt-

$210.99

ing of the smoke ejector in any direction.

PRICE

$717.99

$1123.99

$647.99

$756.99

$1053.00

$1162.99

$1185.99

$1294.99

$1716.00

$1825.99

$1443.00

$2106.00

These hangers allow you to put your Super

Vac almost anywhere; on doors, ladders, windows,casements, archways, etc. Used in conjunction with the Door Bar, they permit placing at any height.

P

M

E

N

T

E

Q

U

I


132

Portable Generators

P

M

E

N

T

E

Q

U

I

Premium Portable Generators

Rugged and powerful generators for the most demanding jobsites

Designed for emergency scene, construction rental and other demanding applications, these high performance, portable generators deliver unmatched tool starting and voltage regulation in a rugged, compact package. Built the WACKER way, with heavy-duty frames and premium components to provide long, trouble-free operation even in abusive environments. Ideal for powering high starting amperage tools such as compressors, grinders, fusion welders, saws, pressure washers as well as all of your WACKER electric- powered pumps, breakers, drills, concrete vibrators, etc.

Best in class tool starting and voltage regulation due to unique step-start generator technoland heavy duty shock-mounting combine to provide outstanding impact protection. A super quiet muffler allows for versatile operation.

Available with the high performance WACKER OHC engine (on GP2600 and GP4000) or Honda OHV engine, both feature low oil shutdown.

ogy with AVR (automatic voltage regulation) and separate excitation winding.

Full wrap-around frame with dual cross-member support, high impact polyethylene fuel tank

Item#

GP2500A

GP2600

GP3800A

GP4000

GS9.7V

Description

2500 watts /4.1 kw output Honda engine 120V

2600 watts/4.2 kw output with Wacker engine 120V

3800 watts/6.0 kw output with Honda engine 120/240V

4000 watts/6.0 kw output with Wacker engine 120/240V

Price

$1208.00

$1208.00

$1783.99

$1783.99

9700 watts/13.4 kw output with Vanguard Storm engine includes voltage selector $3411.99

Value Portable Generator

Other models available, contact us or see our website.

Reliable portable power in a value package

Commercial grade portable generator series built with the value conscious. Offering just those job site proven features that are really needed, these generators are ideal for powering your WACKER electric pumps, breakers, drills, concrete vibrators, as well as saws, lights, heaters, etc. These generators are also ideal for home and small business temporary power or powering job site trailers.

Powered by commercial grade Honda OHV engine with low oil shutdown and one pull start for optimum performance.

Automatic engine idle control reduces engine wear, noise and fuel consumption.

Large steel fuel tank, featuring an easy to read fuel gauge, offers long run times between fills.

All components are protected by a durable wrap-around steel tube frame.

Maintenance free alternator with separate excitation winding and AVR (automatic voltage regulation) for superior voltage regulation and best in class tool starting.

Full 120V power switch for maximum 120V or 120V/240V power -- ideal for a wide variety of applications.

GFCI (neutral bonded to ground) protected 120V duplex

Item# Description outlets complies with OSHA job site requirements.

GV2500A 2500 watts /4.1 kw output Honda engine 120V

Large muffler provides for quiet operation.

Price

$ 869.99

GV3800A 3800 watts/6.0 kw output with Honda engine 120/240V $1396.99

GV5600A 5600 watts/8.2kw output with Honda engine 120/240V $1667.99

GV6600A 6600 watts/9.7kw output with Wacker engine 120/240V $2042.99

Submersible Pumps for Low Water Level Pumping

High Performance Centrifugal Trash Pumps

These high performance singlephase submersible pumps are ideal for jobs needing fast, dependable, low level water pumping. No matter how large or small the job, WACKER's submersible pumps offer the versatility and durability needed for light

PSG2500 dewatering. Suitable for most

110V outlets, these pumps offers big pump features for a small pump investment.

$417.99

PT3A

WACKER's centrifugal trash pumps have proven themselves on jobs around the world. With an optimized impeller design and built-in friendly features, this line of trash pumps has redefined the quality and durability standards of self-priming centrifugal trash pumps. Includes strainer, t-bolt clamp, operator's manual and parts book

$1432.99

Other models are available, contact us or see them on our website

Add option like a strainer, quick connect couplings, hose and wheel kits.


133

ALL OF OUR EYEWEAR IS 100% SHATTERPROOF AND MEET THE ANSI Z80.3 SHATTERPROOF

AND OR ANSI Z87.1-2003 HIGH IMPACT STANDARDS, AND PROVIDE 99.9% PROTECTION FROM

HARMFUL UVA AND UVB RAYS.

Use them as everyday glasses while being ready to use them as safety glasses at anytime!

Every pair of our glasses includes a micro-fiber carry case, anti-fog cloth and adjustable cord.

SAFETY with STYLE

Series

These glasses are crafted of high grade polycarbonate material with an “Ultralight” frame designed for comfort. Utilizing

No-Slip temple ends to keep your glasses where they belong.

Just

$12.99 each includes accessories

16812

Gold Revo Lens

Black/Orange frame

1663

Silver Mirror Lens

Shiny Black frame

1624

Clear Lens

Black frame

1641

Smoke Lens

Crystal Black frame

E

Y

E

W

E

A

R

Just


Series

These glasses are crafted of high grade polycarbonate material with EVA Foam

Lining for Maximum protection.

10410

10117 1021 1024

Emerald Revo Lens

Crystal Brown frame

Silver Mirror Lens

Shiny Black frame

Clear Lens

Black frame

Clear Lens

Black frame

Series

These glasses are crafted of high grade nylon material with an

“Ultralight” frame designed for comfort. Comfort fit rubber nose piece.

Just


16812 1733

Gold Revo Lens

Black soft touch Silver Mirror Lens

Black/Red frame

Series

These glasses are crafted of TR-

90 UltraFlex, UltraLight Frame

Technology. Comfort fit rubber nose piece. Soft, non-slip rubber temple ends.

Just


9610 9117

Emerald Revo Lens

Shiny Black frame

Brown Mirror Lens

Liquid brown frame

Just


Series

These glasses are crafted of high grade polycarbonate material with EVA foam lined eyes.

UltraLight frame for comfort.

548 546

1731

Smoke Lens

Black frame

925

Yellow Lens

Black frame

541

Series

These glasses are crafted of high grade polycarbonate material. UltraLight frame for comfort.

Comfort fit rubber nose piece.

Soft non-slip rubber temple ends.

Blue` Revo Lens

Crystal Black frame

Brown Lens

Crystal Black frame

Just


1548

Red Revo Lens

Black frame

15117

Brown Mirror Lens

Crystal Brown frame

Smoke Lens

Crystal Black frame

1541

Smoke Lens

Crystal Black frame

1734

Clear Lens

Black frame

924

Clear Lens

Black frame

554

Clear Lens

Crystal frame

1524

Clear Lens

Shiny Black frame

134

Goggles

91352AF

E

Y

E

W

E

A

R

Clear

91351AF

Fog

Our goggles are made from

Polycarbonate lenses. They are shatterproof and are visually correct and they also block

99.9% of harmful UVA and

UVB Rays. Our goggles also include surgical grade foam lined with an adjustable elastic strap for use with or without a helmet

Our goggles easily fold for compact storage

Available with Clear, Fog or

Yellow(not shown) lenses

Only $14.99 each includes carry bag and fog cloth

Tactical Goggles from Wiley-X.

These goggles include a smoke lenses, clear lenses, a zipper top nylon case, temple ares to use if you don’t need the goggle straps.

It also includes a leash strap and elastic strap. These are APEL approved, ballistic certified and meet the ANSI Z87.1-2003 standards.

SG-1

Only

$97.00

Tactical Goggles from Wiley-

X. These goggles include a smoke lenses, clear lenses, a zipper top nylon case, temple ares to use if you don’t need the goggle straps. It also includes a leash strap and elastic strap. These are bal-

CQC

Only

$59.00

listic certified and meet the ANSI high velocity impact stan-

This multi-functional, patented eyewear reduces glare in

JP-2

extreme sunlight with polarized smoke green lenses. The innovative Seal-Tek™ system seals your eyes from outside elements. Ultra

Foam™ gasket system allows you to determine the configuration on or off the water or snow.

Only

$69.99

Seal your eyes when the wind is kicking up and eliminate the distracting back-lit glare to enjoy the beautiful surroundings. Remove the gasket and you have a great polarized sunglass for every day wear. Includes the following, Removable Facial Cavity Seal, Soft

Case, T-Peg Elastic Strap, Leash Cord, Cleaning Cloth.

LATM - Light Adjusting Blink provides incredible vision both

BLINKCC

day and night. No more interchanging lenses, this model changes from clear to dark grey in seconds.

Combine this lens technology with the new Facial CavityTM Seal and encase your eyes in a perfect climate controlled environment for

Only

$69.99

clear, crisp vision that meets the stringent ANSI

Z87.1-2003 optical standards. Great for day and night patrolling.

Includes the following, Removable Facial Cavity Seal, Soft Case,

T-Peg Elastic Strap, Leash Cord, Cleaning Cloth.

Constructed with a nearly indestructible triloid nylon frame, this

Top Jimmie model has a neutral smoke grey lens for clear, crisp

JIMMIE

vision in the brightest conditions.

Functional TR-90 frame comes complete with removable facial cavity seal™ and tension strap so you can get after it when necessary or

Only

$69.99

remove and set it casually for that walk in the park. Dual injected rubberized temple tips for a comfortable sport grip. Meets ANSI

Z87.1-2003 Safety Standards. Includes the following, Removable

Facial Cavity Seal, Soft Case, T-Peg Elastic Strap, Leash Cord,

Cleaning Cloth.

Tactical Goggles from Wiley-X.

These goggles are already in use by Military Special

Operations Units and Tactical

Law Enforcement, the ultra tough, patented SG-1 V-Cut was designed to meet any situation.

Slots allow for added circulation and ventilation for intense operations. Durable design meets

ANSI safety and the military’s Vo Ballistic Test – MIL-PRF-

31013, the rigorous 0.15 caliber ballistic impact test.

Includes V-Cut Smoke Lenses, V-Cut Clear Lenses , Zipper

Top Nylon Case, Leash Cord and Elastic Strap.

These Tactical Goggles provide superior eye protection in the harshest and most critical situations faced by today's military and law enforcement. Newly developed Top Down™ ventilation system along with our Foil™

SG1V

Only

$97.99

anti-fog coating keeps this goggle fog free. The Nerve goggle fits largest range of head and facial sizes, also first goggle to fit women and men with narrow faces. Meets both

ANSI Z87.1-2003 high velocity protection and MIL-V-43511C military ballistic standards. Includes Smoke Lens, Clear

With a goggle’s soul in sunglass body, this No

Tears™ modular eyewear system provides incredible

XL-1

SP28

Only

$79.99

wind, sun, glare and debris protection. Shatterproof

Only

$69.99

Selenite™ polycarbonate can withstand just about anything thrown at you. Advanced technology ensures a perfect fit with durable Ultra Foam™ sealing the eyes from the elements.Smoke lenses, Clear lenses, Nylon case,elastic strap.

cleaning cloth all included


Foam Lined Safety Glasses

135

E

Y

E

W

E

A

R

ONLY

$14.99

each includes carry bag, anti-fog cloth and string cord


O

R

I

E

S

C

C

E

S

S

E

T

S

&

A

H

E

L

M

136

We have all sizes and style helmet shields to fit your helmet. Choose from our traditional style or choose our patriotic shield. Need a medallion? Select from our large variety. We also have

Gold and Silver leave shields in 4 and 6 inch shields. See our website for the complete line of shields.

Most shields are only

$34.00 each. NY Style with insert is $47.00

.

Insert only is $13.00

.

Medallions are extra, see our website for actual costs.

Ask about our

Specialty Shields

Style 6C

Style NY5

Style LA3

Style LS3

Style 6D

Helmet Shields

6” Shields

Style 6E

Style 6P2

Style NY5OF

6” NY Style Shields

Style NY4

Style LA3

LA Style Shields

Style LA3 with medallion

Style LA2

Passport Style

INSERT1

INSERT2

LA Short Style Shields

Style LS6

Style LS5

Gold and Silver Leaf Shields

$120.00 each

Gold and Silver Shields

See our equipment section for more helmet accessories

It looks like real gold and silver leaf, but without the price. Also available in white.


All ranks available


Shown with goggles

Helmets

137

Shown with

Bourke eye shields

1500-TL2 Traditional Leather Helmets

The TL2 is made from TOP GRADE Veg-Tanned leather with an exclusive filigree design to commemorate and never forget our fallen brothers and loved ones on 9/11/01. Weighing approximately 55 ounces, it is ergonomically correct and fits comfortably and lower on the head. The inside dome is made of injection molded thermo-plastic, designed for durability. The

Impact Cap is closed cell foam (comparable to the foam inside football helmets, designed to take hit after hit). The chinstrap is Nomex Webbing with a standard Postman's slide buckle.

Optional chinstrap choices are a quick release style or a combination of both. The earlaps are detachable and made from black Nomex and black fire retardant cotton. The optional sewn-in earlaps are made from the same materials and must be requested, if desired. The suspension liner comes standard with a ratcheting device for easy donning and doffing. The Nape Strap style suspension is an available option. Both are easily removed for cleaning and maintenance. We add a Custom Comfort pad to the front headband for maximum comfort. The

NFPA Compliant 3M Reflective Tetrahedrons come in

Lime/Yellow, Red/Orange, or White/Silver. The TL2 comes standard with a custom "all leather" ID Shield. A variety of options are available to customize your department.

Available in Black, White, Red and Yellow.

As Low as $385.00 each

Shown with

Standard TL-2 style, topped with a brass eagle finial. NFPA rachet

Phenix Firefighting Goggles (Optional in California) are standard with helmet. ESS Goggles are also available by request. A D-ring is installed on back brim (also optional) for you to hang your

TL2 easily. Your TL-2 comes with your accessory pack which includes: The helmet accessory band, 2 wedges and 1 Garrity light. The Flip Down "Borke Style" Eye Shields are available.

TC1 Composite Helmets

This helmet looks like a traditional helmet without the traditional he,met cost. These helmets meet NFPA 1971 standards and are topped with an American made brass

Eagle. High temperature compression molded composite shell, closed cell energy absorption impact cap, suspension liner with rachet system, custom comfort pad, Nomex ear flaps,, nomex chinstrap, reflective tettrahedrons are all standard on these helmets.

These are available with a Available in White, Black Red,

Yellow.


1500-Series Helmets

O

R

I

E

S

C

C

E

S

S

E

T

S

&

A

H

E

L

M

The first due 1500 series helmets are NFPA 1971 compliant. The helmet is available with a Nape Strap suspension liner with 8" earlaps. High temperature Thermo Plastic Shell, closed cell energy impact cap, 4.5" faceshield w/ scratch resistant coating. Nomex webbing chinstrap with Postman slide and

O-ring attachment w/ screw knob attachment kit. 3M Lime Yellow Reflective

1 x 4 strips (4). Approximate weight 38 ounces or Nape Strap suspension liner without earlaps, High temperature Thermo Plastic Shell, Closed cell

2000G energy impact cap, NFPA Compliant Goggle w/ retainers, Nomex webbing chinstrap with Postman slide and O-ring attachment w/ screw knob attachment kit, 3M Lime Yellow Reflective 1 x 4 strips (4). Approximate Weight 38 ounces. you can also choose a Ratchet suspension liner with 8" earlaps.

High temperature Thermo Plastic Shell, closed cell energy impact cap,

NFPA Compliant Goggle w/ retainers. Nomex webbing chinstrap with Postman slide and O-ring attachment w/ screw knob attachment kit. 3M Lime Yellow Reflective 1 x 4 strips (4). Approximate weight 39 ounces.

These are available with a Available in Orange, White and Yellow.


2000F

2000GR


S

C

B

A

A

C

C

E

S

S

O

R

I

E

S

138

SCBA ACCESSORIES

$21.99

GFMBFULLFACE

Full Facepiece Bag

FELT LINED Mask Bag is made of Heavy Cotton Duck fabric.

Accommodates face pieces that have mask mounted regulators and voice systems. Ideal for alternative masks for Hazmat and or Chemical masks. Includes a scissor clip for easy attachment.

Low Profile Cinch Bag

$11.99

Reg Size

GFMBDSREG

Made of 1000 Denier Cordura.

Conforms to the contour of your mask keeping it low profile.

Includes a swivel clip for attachment and reflective name plate.

Two sizes are available in many colors. Add a felt liner option.

$13.49

Lg Size

GFMBDSLARGE

Optional Felt Liner

Add $4.00

Clam Shell Mask Bag

Made of 1000 Denier Cordura.

Conforms to the contour of your mask. Top splits down to 5" on each side providing a large opening for easy access. Attaches with a heavy scissor clip. One size fits all.

$13.99 GFCLAM

Quick Release Mask Bag

Our mask bag is manufactured from 1000

Denier Cordura. A felt lining protects the lens. In addition, we have used snaps as opposed to

Velcro which has little heat tolerance. The Mask

Bag folds up to the size of a sandwich to easily fit in your pocket. Two sizes available in many colors!

$11.99

GFMBREG

Regular Size

$13.49

GFMBLARGE

LargeSize

Drawstring Mask Bag

This handy bag protects your air mask from scratches and UV rays.

It includes a dust cover, an easy to use drawstring closer, and a metal swivel snap hook to attach it on fixed objects.

Available in Red or Black

Mesh Mask Bag

Protect and store your facepiece with this nylon mesh bag. Bag measures 12" x 14" and provides for superb air circulation.

Bag will hold all types of facepieces.

$17.59

FIP96101

$12.99

RBMB165

Gas Mask/Respirator Bag Deluxe

This is our top of the line Gas Mask/Respirator Bag. Easily accommodates all types of masks and respirators. Provides the responder with a convenient method of transporting the device leaving the hands free for additional items.

Dimensions: 10 1/2" H x 7 1/2" W x 6" D. 475 cu. in. Wt. 13 oz.

1000 Denier Cordura® Nylon Plus Web reinforced hem with tri-fold corners, Side release Nexus buckles for closure, 1 1/2" web belt drop with quick release buckle. 1 1/2" web leg strap.

Two Dee rings for optional shoulder strap RBAB433, not included

Optional 1 1/2" web belt RBAB434, not included

$30.99

RBAB430BK

Gas Mask/Respirator Bag

This is our middle of the line Gas Mask/Respirator Bag. Same size as the Top of Line but, with hook and loop closure. Provides the responder with a convenient method of transporting the device leaving the hands free for additional items. Dimensions: 10 1/2" H x 7 1/2" W x 6" D. 475 cu. in. ,Wt. 8 oz. 1000 Denier Cordura®

Nylon Plus ,Hook and loop closure, 1 1/2" web belt drop, 1 1/2" web leg strap, Two Dee rings for optional shoulder strap #433, not included,Optional 1 1/2" web belt #434, not included $25.99

RBAB431BK

$4.99

Gas Mask/Respirator Bag Economy

This is our economy line of the Gas Mask/Respirator Bag. Provides the responder with a convenient method of transporting the device leaving the hands free for additional items. Dimensions: 8" H x 7 1/2" W x 6 1/2" D. 390 cu. in. Wt. 8 oz. 1000 Denier Cordura® Nylon Plus, Hook and loop closure, 1" waist strap adjustable to 55", 1" web leg strap,Two Dee rings for optional shoulder strap $25.99

RBAB432BK

RBAB433, not included

Gas Mask Bag Strap Gas Mask Bag Waist Strap

RBAB433

The belt and strap help secure the

Gas Mask/Respirator Bag to the responder.

$4.99

RBAB434

SCBA Equipment you need


139

Smoke Trainer Inserts

Unlike any other Black Out Cover on the market, We have taken the concept of training without smoke and fire to a new and safer level. The Simulated Smoke Training Insert is made of porous foam that inserts into any style SCBA Face Mask without impeding the seal of your mask. The porous foam limits your vision just like being in a smoke filled room. The product is package together in three simulated grades; light smoke/vision slightly impaired, medium smoke/outlines only seen, and heavy smoke/ vision almost completely blocked. You will now be $5.99

GFSSTI able to drill in a safe but real life atmosphere.

S

C

B

A

SCBA Company Identifiers

Cylinder/ Armband Markers SCBA Cylinder Band Markers

Cylinder or Armband

Marker Straps 5" x 9"

Place a Marker on every cylinder at a the scene.

It will make managing your crews more efficient. Each one of your crews can be identified by vehicle. Example L 1 for Ladder Company

One, E 2 for Engine

Company 2, Ect... Made of Nomex (TM) and 3M

Reflective (TM)

Available in Red, Yellow,

Blue, Black and

Orange.includes to letters/numbers, each additional is $1.50 each

$24.99

GFCAM

SCBA Cylinder Staging Mat

Place a Company Marker on the rear cylinder band of a

SCBA harness . Markers stay on the harness while changing cylinders. Made of Nomex and attaches with 4"

Velcro. Markers are 4” X 6” in size

Available in Red,

Yellow, Blue,

Black and

Orange.

Includes two letters/numbers, each additional is $1.50 each

$12.99

GFCMBAND

Front SCBA Strap/Hoseline Markers

This SCBA Staging Mat is

10 feet by 5 feet in size.

Our SCBA mat was designed to hold up to 32 full/empty SCBA

Cylinders.

A

C

C

E

S

S

O

R

I

E

S

Each section is pleated so the cylinders will not roll and are color coded to identify full or empty status.

Place a Company Marker on the front strap of a SCBA or attach to hoselines, by nozzle by pump or both. Use these in combination

Organize your fire-ground to save valuable time.

Made of 18 oz Rip Stop

Vinyl.

with the SCBA band markers to easily identify operating companies.

Can also be used to meet NFPA standards for hoseline identification.

Made of Nomex and attaches with 4" Velcro.

$134.99

GFSCBAMAT

Markers are 2” X 4” in size.

Available in Red, Yellow, Blue, Black and Orange.includes two letters/numbers, each additional is

$1.50 each

$12.99

GFCMHOSE


S

C

B

A

A

C

C

E

S

S

O

R

I

E

S

140

Kevlar SCBA Mask Strap

Mask Bag for the ultimate in mask protection and wear.

$12.99

GFMS


Leather SCBA Mask Strap

Strong and Heat

Resistance

Includes Quick Release

Center Snap for Safety

Heavy Duty 1" Kevlar

Strap with metal quick clips attaches directly to the rings on your SCBA

Mask for easy wearing.

Our Mask Strap includes a center break away for safety purposes. The Mask Strap works great with our

Strong and Heat Resistance

Includes This SCBA Mask Strap is riveted and sewn for extra strength. the overall length of the strap is 34 inches.

$7.99

GFMS


SCBA Mask Clip

$4.99

GFMRC

Have your mask ready to go when you want it.

The Mask

Clip includes two scissor clips that attach to the rings on your mask and easily attach to any D-ring on your gear

SCBA Bottle Carrier

Our collapsible SCBA Bottle Carrier solves all of your spare cylinder transport needs! In expanded position, it will hold 8 spare cylinders. It will fit easily into truck compartments when collapsed.

Heavy Duty Construction. Rugged nylon coating - 1/4" Dia. Wire. Keeps Valves up and out of dirt, sand, etc.Hold 8 bottles.Store and Transport bottles

Large size fits 6 3/4" and 7 1/4" bottles

Small size fits 5 1/4" bottles

$165.99

FC39400/1

The SCBA Cylinder Carrier allows a Fire Department to maximize use of running SCBA cylinders back and forth to a scene. As opposed to a firefighter just carrying two cylinders, they can now carry four.

The webbing strap is made of heavy tubular webbing, resilient to all types of weather. A rubber handle allows for quick non slip grip.

Available in Red, Yellow, Black, Blue, Green or Orange

$5.99

GFBC

SCBA Cylinder Carriers

The rugged Flame Fighter bracket safeguards your SCBA cylinders from scarring and damage. The highest quality nylon protective coating and thermoplastic available will outlast all other coatings. Strong resilient cylinder clips made of 1075 spring steel will hold their shape and will not damage the cylinder. We guarantee it with

The Industries Original SCBA Bracket Lifetime Warranty!

Our clips are coated with a base coast of high grade nylon and a second layer of high grade thermoplastic for added extra protection

Part #

FC15251

FC16751

Description

Assembled 5.25 (30 min high pressure)

Assembled 6.10 (30 min low/45 min high pressure)

Price

$42.99

$42.99

on the tips of the clips. Excellent for use with all cylinders including carbon fiber cylinders. Third party tested to over 50,000 cycles

FC17251

FC25251

Assembled 7.25 (60 min low/high pressure)

Unassembled 5.25 (30 min high pressure)

FC26751 Unassembled 6.10 (30 min low/45 min high pressure)

$42.99

$40.99

$40.99

FC27251 Unassembled 7.25 (60 min low/high pressure) $40.99


Equipment you need SCBA ACCESSORIES 141

New and Innovative SCBA Restraint

The New "Ready-Set-Go" (RSG) SCBA Restraint

Can easily be retro-fitted with any brand SCBA or SCBA Seat patents pending

Eliminates Troublesome Safety Straps

The New "RSG" NFPA compliant restraint uses a completely redesigned system to hold the

SCBA in place in the event, the vehicle is in a collision. It uses a positive locking "Halo" to hold the top of the tank in place. And a "Receiver" to secure the valve end of the tank.

The Halo is released when the firefighter simply push's down on the release button mounted conveniently on the seat. The release button can be mounted on the left, right, or front edge of any seat.

Compliant to NFPA 1901-03

Exceeds NFPA standard,

Independent 3rd party tested.

Tested without failure to a

30g impact.

Model

FC15000

FC16000

FC17000

Description

30 min high pressure

30 min low/45 min high pressure (shown)

60 min low pressure/high pressure

Price

$374.99

$374.99

$374.99

SCBA Bracket with Safety Strap

Flamefighter 3-Point Release

In crew areas where SCBA’s are stored, keep them locked securely in place with this system. You can don the SCBA while enroute and keep it safely secured. When you reach your destination, pull the lanyard from between your legs, or along side the seat and you are ready to go!! The 14000 fits all brands and tank sizes.

$92.99

FC14000

SCBA Seating

FlameFighter SCBA seats are now available with our new RSG innovative SCBA restraint that does away with troublesome safety straps, this new NFPA compliant restraint uses a completely redesigned system to hold the SCBA in place in the event the vehicle is in a collision. Our

SCBA seating works with any brand or model SCBA.

The part number for the seat with the new restraint is #FC205 (shown).

Our #FC203 (not shown) which has our FC14000 restraint is available as

$1210.00

FC205 well.

The FlameFighter SCBA seat is built for the rugged demands of firefighting. It has tough 46oz vinyl with high density foam and quality stitching throughout. In addition, the split in the head rest holds the shoulder straps securely in place for easy donning of the SCBA. Large lower openings give the waist belt a place to be out of the way. Available in Grey and Black

SCBA Bracket Parts

Model

FC35251

FC36751

FC37251

Bracket Clips

Size

5.25”

6.10”- 6.75”

7.25”

Price

$11.99

$11.99

$11.99

Bracket Back

Plates

$22.99

FC38001

$352.99

Bracket Foot

Plates

$13.99

FC110

FC38011

SCBA Seat Back

The FlameFighter collar cushions offer critical supports and comfort in vehicle crew areas.

Special design allows firefighters to strap on the SCBA unit while enroute. All mounting brackets are included.

(not shown) SCBA brackets sold separately, standard colors black & grey.

The unit is 23” high X

18” wide X 9” deep

A

C

C

E

S

S

O

R

I

E

S


S

C

B

A

142 Gear & Equipment Bags

Gear Bags you need

G

E

A

R

B

A

G

S

XL Extreme Gear Bag

Oversized gear bag with many extra features. Outside vent pockets to allow wet equipment to dry yet easily available.

Also each side has zippered pockets for storage. End bellowed pockets for SCBA mask or personal item storage. Great bag with a great look. Made of Cordura nylon. #10 YKK zipper. Available in

Red/Black or Yellow/Black. Measures

14" x 16" x 24" plus end pocket. 6000 cu.in.

$78.25

RBAB-04XX

Wt. 36 oz.:

Extreme Gear Bag with SCBA Pocket

$57.25

RBAB-05XX

Large gear bag with vented SCBA mask storage pocket.

Ample room for storage of turnout gear inside. Made of

Cordura nylon. #10 YKK zipper. Measures 14" x 16" x 24" plus SCBA pocket. 5900 cu. in. Wt. 36 oz.

Extreme Gear Bag Regular

Stand On It- Gear Bag w/ SCBA Pocket

$54.75

RBAB-02XX

Step-In Bag.

Designed with large zippered flap that allows the responder to access their turnout gear quickly. The flap when unzipped allows a dry surface to don the turnout gear. A vented and bellowed SCBA Mask Pocket keeps the mask dry and available for quick access. Large carry straps can convert to a shoulder strap for easy transporting. Made of Cordura nylon. #10

YKK zipper. Available in Red/Black or Yellow/Black.

Measures 16" x 16" x 17" plus SCBA pocket. 4650 cu. in.

Wt. 36 oz.

XL Roll Bag

$56.75

RBAB-03XX

$50.75

RBAB-01XX

Our original gear bag redesigned. Outside pockets accessible from either end.

Also side zippered pouches

Cordura nylon. #10 YKK zipper. Available in Red/Black or Yellow/Black. Measures 13

1/2" x 13" x 24". 4200 cu. in.: allow storage for gloves or personal items. Made of

Roll Bag. Great for use as a duty bag or equipment bag.

Vented Zippered end pocket to keep gloves or damp gear dry. Full length double zippered top allows easy access in the bag. Made of Cordura nylon. #10 YKK zipper. Available in Red/Black or Yellow/Black. Measures 27" L x 12"

Diameter. 3100 cu. in. Wt. 26 oz.


Gear Bags you want

Gear & Equipment Bags 143

Oversized Gear Bag

This super sized gear bag has plenty of room for extra equipment or supplies. Five various sized pockets. Left side pocket measures 16" x 17" x 8", large enough to hold a New Yorker Style Helmet. Right Pocket will hold a

SCBA Mask and extra items. ID Window, carrying handle made of 2" webbing, handle wrap to keep handles together, heavy #8 nylon zipper double stitched. Plain black is great for law enforcement operations. Colors: red with the maltese cross or plain black.

Dimensions: 32"L x 17"D x 16"H

Wt 48 oz.

Total of 8704 cu. in.

Features:

1000 denier textured water repellent nylon

$39.00

RB911MXX

Carry handle made of 2Ë?webbing

Handle wrap to hold handles together Heavy duty lockable nylon zipper double stitched

G

E

Boot Style Gear Bag

A

R

A boot style gear bag with all of the features you want. It allows ample room to set your boots and pants on one side and a folded coat beside them. It will hold a helmet with a long face shield and other related gear.

Our exclusive design has 140 square inches of mesh for ventilation under the storm flap allowing moisture to escape while the storm flap protects your gear from harsh elements.

Made of 1000 denier water repellent nylon.

$33.25

RB910IM

Wt 32 oz. 5138 cu. in.

Imported. Measures: 20 1/4" L x 14 1/4" D x 18 1/4" H.

Features: Removable 2" web shoulder strap with pad

Heavy duty #8 nylon zipper, ID card window

Lime-yellow reflective trim ,Storm flap

Mesh ventilation under storm flap on each side 13.5" x 15 "zippered side pocket Bag bottom made of nylon reinforced water proof vinyl

B

A

G

S

Supersized Super Gear Bag

Extra Large Gear Bag

$54.75

RB200MCXXX

The king of the gear bags. The picture shows it with two complete sets of gear packed in it. An extra long handle of 2" web allows it to be carried over your shoulder or as a backpack.

Same construction and features as the #200-XL. These XXX

Gear Bags contain 2,000 cu. in. more space than the X-Large

Gear Bag.

1000 denier Cordura® nylon. #10 YKK zipper.

Measures 15" x 16" x 30". 7,200 cu. in. Wt. 36 oz.

The EXTRA

LARGE

TURN OUT

GEAR BAG is constructed the same as the regular turn out gear bag except it's

25% taller.

Plenty of room to spare after setting your boots and bunker pants on one

$50.75

RBAB-01XX side and coat and helmet on the other side.

This bag will hold approximately 40 vests.

Made of Cordura® nylon.

Measures 13 1/2" x 16" x 24". 5,200 cu.in.

Wt. 31 oz. Available in Black, Red and Red with Maltese



Gear Bags you need

XL Gear Bag $25.99

GFGEARBAG

This gear bag is 25” Long x 15” Tall x 17” Wide - A large double zippered opening easily fits all of your gear, Turnout Coat,

Bunker Pants, Boots, and

Helmet, with room to spare. Includes an outside pocket for storage of personal items. It is light weight and weather resistant .

G Turn Out Gear Bags

E

A

R

B

A

G

S

$40.99

RBAB-200XX

The original

"TURN OUT

GEAR BAG" was designed and manufactured by R&B

Fabrications.

Designed to hold turnout coat, helmet, boots, and miscellaneous equipment. Outside zipper pocket for extra gloves and small items. This bag will hold approximately 30 vests.

Made of heavy Cordura® nylon. #10YKK nylon zipper and a

2" web handle to support the load.

Measures 131/2" x 13" x 24". 4,200 cu. in. Wt. 26 oz.

Available in Red, Red with Maltese Cross and Blue with Star of Life

Wide Mouth Gear Bags

Step In Bunker Gear Bag

$41.75

RBAB-199MC

A different concept from our normal Gear

Bag. Ideal for turnout gear or bunker pants.

Allows ample room to set your boots or pants on one side and folded coat beside them. Will hold a helmet with long face shield and other related gear in a small inside pocket.

Made of heavy Cordura® nylon, #10 YKK nylon zipper and a

1 1/2" web handle.

The bottom of the bag is made of heavy-duty semi-tarp, vinyl coated nylon. Easily cleaned and prevents water absorption.

Measures 16" x 16" x 17"H.

Color: Red with a Maltese Cross and ID tag. 4,350 cu. in.

Wt. 30 oz.

Haz Mat Suit Bag

This bag will hold a suit, boots, respirator, etc. A clear vinyl window on the side holds an inspection sheet.

$33.99

RBAB-190

Measures 23" long x 13" high x 12" wide.

Made of Cordura® nylon. 3,600 cu. in.

Color: Red. Wt. 20 oz.

Haz Mat Equipment Bag

New easy accessible open top gear bag. Loading and unloading your complete set of turnout gear along with miscellaneous items has never been easier. 1 1/2" strap runs completely under the bag and Velcro® strips hold the handles together for a quick trip.

Made of red Cordura® nylon. Measure 24"L x 17"H x 14"W.

5,700 cu. in. Wt. 30 oz.

Available with Velcro close top or Zipper close top, remember to specify.

$46.75

$41.75

RBAB-194MCZ

RBAB-194MC

Zipper Closure

Velcro Closure

$33.99

RBAB-195

Made on the same principle as our 200MC. It can be used to hold your hazardous materials clothing or other related items. Has an outside pocket for extra gloves and small items. A 2" web handle helps support the weight. Made of

Cordura® nylon. Haz-mat Equipment in yellow Lettering.

Wt. 26 oz.


Equipment you want Gear & Equipment Bags 145

Quick Attack Bag

A smaller size carry bag for your lesser-sized items.

Features one padded center com-

$39.99

FIP97041 partment, two roomy end compartments and a handy front zippered pocket for small items. Other features include a leather handle, I.D. holder, and removable shoulder strap. Constructed of Cordura® Plus nylon, heavyduty buckles, webbing, foam padding and YKK® zippers.Colors:Blue, Red, Black

Tactical Bag

Fahrenheit Flight Bag

Whether you are flying commercially or just commuting to the station, this multi-purpose bag is just what you need to carry your basic stuff. This

$59.99

FIP20011 compartment, and two end compartments, and a pen and pencil holder and metal key holder. It also incorporates a padded shoulder strap. Other features include a leather handle, and an I.D. holder. Constructed of Cordura® Plus nylon, heavy duty buckles, webbing, foam and YKK® zippers.Colors:Blue, Red, Black unique bag features one main compartment, two front and one rear

G

E

A

R

Command Pack Bag

Another popular bag choice for carrying first aid equipment or

$59.95

FIP97082 storing gear on the apparatus.

Features one padded center compartment, two end compartments and two handy front zippered pockets for additional space. Other features include a leather handle, I.D. holder, and removable shoulder strap.

Constructed of Cordura® Plus nylon, heavy-duty buckles, webbing, foam padding and YKK® zippers.

Logistics Bag

One of our most popular bag for carrying gear to and from the station or strike team.

$63.95

FIP20011

Features one padded center compartment, two roomy end compartments, two wet/dry end compartments, and a handy front zippered pocket. Other features include a leather handle, I.D. holder, and removable shoulder strap. Constructed of Cordura® Plus nylon, heavyduty buckles, webbing, foam padding and YKK® zippers.

Colors:Blue, Red, Black

$99.95

FIP97081

Our largest multi-purpose bag. It is so big we included backpack straps that conveniently stow into the bottom of the bag when not in use. This deluxe travel bag features one center compartment, two roomy side compartments, two wet/dry end compartments and a handy front zippered pocket. Other features include a leather handle,

I.D. holder and a removable shoulder strap. Constructed of

Cordura® Plus nylon, heavy-duty buckles, webbing, foam padding and YKK® zippers.Colors:Blue, Red, Black

B

A

G

S

Greater Alarm Bag

One of our most popular bag for carrying gear to and from the station or strike team.

Features one padded center compartment, two roomy end compartments, two wet/dry end compartments, and a handy front zippered pocket. Other features include a leather handle, I.D. holder, and removable shoulder strap. Constructed of Cordura® Plus nylon, heavy-duty buckles, webbing, foam padding and YKK® zippers.Colors:Blue, Red, Black

$66.95

FIP94125


B

A

G

S

G

E

A

R


Police Logistics Bag


First In Assault Bag

This gear bag is 25” Looking for a

Police Gear Bag? This smart bag features one padded center compartment with adjustable foam dividers and two roomy end compartments. Also features a baton holder, a flashlight pocket and a handy front zippered pocket. Other features include a leather handle,

I.D. holder, and removable shoulder strap. Constructed of

Cordura®

Plus nylon, heavy-duty buckles, webbing,

$72.95

FIP97043 foam padding and YKK® zippers.

This popular padded range bag can hold a handgun, speedy loader, magazine clip, shotgun shells and a mini-flashlight. Additional features include a removable shotgun stock sleeve for carrying additional shotgun $30.95

FIP97111 shells.

Tough Case Brief Case

This popular style briefcase has a built in organizer with many internal pockets and an additional front pocket. Also features a pen and key holder plus padded sides and bottom to help protect your delicate lap-top computer or other items from damage. Constructed of Cordura® Plus nylon, heavy-duty webbing, foam padding and YKK® zippers.

Colors: Red, Black, Blue $52.95

FIP95033

Counter Terrorism Bag

This unique dual sectional gear bag is equipped with a lower compartment area of

(L-18"xW-14"xH-10") for heavier equipment and an upper compartment area of (L-

18"xW-14"xH-4") for lighter equipment.

This gear bag also features a leather card holder, carry handle and a padded shoulder strap.

Top View

$55.95

FIP24023

Police Warfare Bag

$74.95

FIP97071

This tough police gear bag features one padded center compartment, two roomy your riot helmet with shield), a baton holder, a flashlight pocket, and a handy front zippered pocket. Other features include a leather handle, I.D. holder, and removable shoulder strap. Constructed of Cordura® Plus nylon, heavy-duty buckles, webbing, foam padding and YKK® zippers.

end compartments

(one large enough for

Patrol Buddy

A very popular choice for law enforcement professionals who know the value of organizing their police equipment, paperwork and essential tools of the trade. Features a flashlight pocket, report box pocket, ticket book pocket, radio pocket and several sensible sized pockets,

Also has a seat headrest strap with a convenient buckle, and a rigid interior frame to prevent the organizer from collapsing when hung. Constructed of

Cordura® Plus nylon, heavyduty buckle and webbing.

$23.95

FIP97051



Medical Bags

Small & Medium Trauma Bag

$49.99

RBAB201

Made of heavy

Cordura® nylon with two end pockets, padded 2" web shoulder strap, luggage handle, a divider inside with slots for shears, forceps,

$59.99

R BAB202 etc. Five elastic loops on inside flap for oral air-ways. Ideal as a personal trauma bag or for first responders. Main body measures 9" long x 8" high. End pocket measures 8" Long x 3" Wide x 41/2" high. 780 cubic inches. Colors:

International Orange or Navy with black trim and a white

"Star of Life" silkscreened on the top flap. Wt. 20 oz.

147

Size is identical to the #202 Medium Trauma and constructed like the #203 Small Trauma. Color: Orange.

Wt. 25 oz.

$63.99

RBAB204

G

E

A

R

$279.99

RBAB825

This large bag is designed for those who want to carry all of their equipment in one bag. It is designed for bleeding control, as an oxygen bag and an airway intubation kit all in one. The center compartment is designed to hold your oxygen cylinder, nasal cannulas and mask. Three elastic gusset pockets on one side of the interior compartment and 3 open slot pockets on the other side.

A draw string bag for holding your demand valve and elastic loops for airways. Oxygen cylinder is cradled in a molded A.B.S. plastic shell which adds stability to the bag and protection for the cylinder.

The sides have a rigid plastic inner wall for stability and protection. One outside pocket has an intubation kit with 9 individual slot pockets plus 2 other pockets for accessories and a row of elastic loops. Facing that pocket are 8 elastic loops. The opposite side of the outer pocket is designed for bleeding control. There are 3 pockets with a clear vinyl flap held in place by Velcro® and on the outside of this are 6 individual removable pockets.

This bag has a vinyl coated nylon bottom and 2 web handles for carrying.

Measures 12" high x 15" wide x 21" overall length.

White "Star of Life" silk-screened on the side.

Colors: Blue or Orange

$204.99

RBAB820

This bag is designed to carry your oxygen supplies, a "D" cylinder and trauma related dressings and equipment. There are three main compartments.

The center compartment is designed to hold an oxygen cylinder and regulator. There are 4 slot pockets on each side and elastic airway loops above the pockets. The oxygen cylinder lays in an A.B.S.

molded plastic tray which provide supports for the bottom and protection on each end. The sides of this compartment have plastic inserts for added protection and stability. At the head of the cylinder is a smaller pocket for shears, forceps, etc.

At the end of the bag, on the outside, is an additional pocket.

On each side of the bag is a full length pocket for total access.

Each outside pocket has pockets made of nylon mesh and 4 nylon pockets with clear flaps.

Above this is a full length elastic strip. Each have a full length pocket for splints and/or large trauma dressing.

On the top of the bag is a small pocket.

An outside carrying handle allows the bag to be picked up without zipping it shut.

The bottom of the bag is vinyl coated nylon for added protection and wear.

Overall dimensions are 10" high x 15" wide x 24" long.

Silk screened White "Star of Life"

Wt. 80 oz. zippers.

Colors: Blue, Orange

B

A

G

S


148 Medical Bags Medical Bags you need

$258.99

RBAB836

Breath Saver Oxygen Bags

A large open interior bag designed to carry your "D" cylinder or Jumbo "D" oxygen tank and supplies. Eight internal mesh pockets and elastic airway loops. The top flap has two mesh zippered pockets. The end pocket opens to allow you access to the oxygen regulator. Front side has two zippered pockets and the back side has a full length pocket large enough to hold several stiff neck collars. Vinyl bottom. 2" web carrying handles and shoulder strap. Made of Cordura nylon.

Colors: Green, Red, and Royal Blue.

Dimensions: 27" long x 12" wide x 10" high. 64 oz.

G

E

A

R

B

A

G

S

Soft Box Trauma Bags

A highly padded trauma bag divided into quarters by removable dividers. Outside pockets have a total of 25 elastic loops of various sizes and zippered internal pockets. The end pockets are large enough to accommodate B/P equipment. A mesh pocket is sewn to the inside of the lid that is large

$205.99

RBAB837 enough to hold BVM. The bottom has two full length plastic rails to extend the life of your bag.

Made of Cordura nylon.

Colors: Orange or Royal Blue.

Dimensions: 19" long x 13" wide x 12" high. 56 oz.

Mini Trauma Bags

$28.99

RBAB840

A small trauma designed for first responders. Two zippered end pockets and a center pocket with corrugated dividers.

Measures 11" Long x 7"

Wide x 41/2" high. 300 cu.

in. Wt. 10 oz.

Mini Trauma bag with

Star of Life

$28.99

RBAB841

Quick Response Trauma Bag

Ideal for first responders.

A down scale version of our popular

RBAB201 trauma bag.

Two inside $43.99

RBAB842 divided pockets, instrument pocket, elastic air-way loops, 3M™ Scotchlite™

Reflective Material stripe and a shoulder strap. Measures 6" x 6" x 13".


Colors: Orange with orange 3M™ Scotchlite™ Reflective

Material White silk-screened "Star of Life". Overall wt. 9 oz

Multi-Pro Trauma Bag

Removable fold out, color coded pockets with clear vinyl window. An ABS molded plastic liner provides protection to contents and is designed to accommodate a "C",

"D", or Jumbo D O2 cylinder.

The removable shoulder harness allows you to use it as a back pack for hands free carrying. This item may be used as a specialty case for airway management, basic trauma, etc. Shoulder strap is included.

Measures 22" x 12" x 7".

Made of Cordura® nylon with 3M™ Scotchlite™ Reflective Material trim and a Star of Life.

1850 cu. in. Wt. 67 oz.

$167.99

RBAB860


Equipment you want Medical Bags

Squad Bags

Padded, removable liner for ease of cleaning, 10 compartments, and 3 are adjustable. Bottom made of nylon reinforced waterproof vinyl. Heavy duty nylon zipper, 18 elastic loops for small items, removable shoulder strap made of 2" webbing, with shoulder pad. Star of Life with the space for you to personalize. Lime-yellow reflective trim, carrying handle is 2" webbing.

Made of water repellent polyester.

Colors: Orange or Blue

Dimensions: 20L" x 13D" x 8"H. Wt. 45 oz.

2080 cu. in.

149

$42.99

RBAB920IM

Squad Bag With “Tuff Bottom”

This "Tuff Bottom" trauma bag offers ample storage and durability. The outside has two side storage compartments with double self healing zippers, divider and elastic storage straps for small items. A glove storage pouch is on the top for easy access.

The top of the case opens with double self healing zippers to open completely for access to internal storage. There are two zippered clear plastic compartments in the top with a semi-rigid divided nylon storage divide for ample trauma supplies. A molded handle on the end of the bag makes it easy to pull from storage compartments.

The bottom is protected by a waterproof Tuff Bottom. Dimensions: 25" L x 9" D x 9"

H. Total of 2223 cu.in. Color: Orange.

$49.99

RBAB929

G

E

A

R

B

A

G

S

$94.99

RBAB967IM

Personal Trauma Bag

Padded carrying handle, sewn in three compartment liner with padded bottom, Star of

Life with space for you to personalize, bag bottom made of nylon reinforced waterproof vinyl, two end pockets with zipper closure,

22 elastic loops for small items, Lime-yellow reflective trim, removable shoulder strap made of 2 " webbing with shoulder pad.

Made of made of water repellent polyester.

Dimensions: 18"L x 8"D x 7"H.

Wt. 28 oz. 940 cu. in.

$27.99

RBAB925IM

"TUFF BOTTOM" Multi Trauma Bag

Plenty of room in this one! The outside has one end pocket, opened with double self healing heavy zippers, with an interior storage sleeve, the opposite end has a molded handle on the end of the bag making it easy to pull from storage compartments. The front of the bag has a large storage sleeve, three divided storage pockets and plenty of elastic straps to secure your equipment. A top sleeve covering the entire top of the case, with a velcro closure allows storage of items such as hand powered suction device or extrications collars. Inside the bag is ample storage with an adjustable divided storage area, two nylon zippered mesh pockets on the top, and a storage sleeve on each end. The bag has 2" adjustable carrying strap with padded shoulder pad. Color: Orange.


B

A

G

S

$122.99

G

RBAB968IM

E

A

R

150

Medical Bags


"TUFF BOTTOM" Multi-Trauma Medical Bags

Plenty of room in this one! The outside has one end pocket, opened with double self healing heavy zippers, with an interior storage sleeve, the opposite end has a molded handle on the end of the bag making it easy to pull from storage compartments. The front of the bag has a large storage sleeve, three divided storage pockets and plenty of elastic straps to secure your equipment. A top sleeve covering the entire top of the case, with a velcro closure allows storage of items such as hand powered suction device or extrications collars. Inside the bag is ample storage with a closed cell divider for an oxygen cylinder holder and a smaller divided storage area below the oxygen cylinder, two nylon zippered mesh pockets on the top, and a storage sleeves on each end. The bag has 2" adjustable carrying strap with padded shoulder pad.

Color: Orange.

Dimensions: 24 1/2" L x 10" D x 10 1/2" H. Total of 2520 cu.in.

RBAB2500RP “D” Size Cylinders

RBAB2510RP “E” Size Cylinders

$55.99

$68.99

Oxygen Bags

One-half inch of high density closed cell foam helps protect the control valve. Large enough for your cylinder, control head and demand valve. A

101/2" long x 41/2" high x 3" deep pocket on the side for mask, nasal cannula, etc. Elastic loops inside pocket for seven oral airways. Shoulder carrying strap allows it to be attached to the cot while moving the patient. Wt.

16 oz. A hook and loop closure inside fits around the neck of the cylinder and prevents it from sliding out of the bag. Made of heavy Cordura® nylon.

Color: Orange with orange 3M™ Scotchlite™ Reflective Material and black trim.

Oxygen Cylinder with Sleeve

$32.99

RBAB475

Oxygen Cylinder Sleeve

Attaches to rail of cot and holds a "D" cylinder. Attaches with

2" hook and loop sewn to 2" webbing. There is a hook and loop tab sewn to the top where you can coil your demand valve or mask tubing and store it when not in use. A small side pocket holds extra masks. Wt. 8 oz Colors: Orange or

Green

Attaches to rail of cot and holds a "C" cylinder. Attaches with

2" hook and loop sewn to 2" webbing. There is a hook and loop tab sewn to the top where you can coil your demand valve or mask tubing and store it when not in use. Wt. 8 oz.

RBAB473

RBAB474

RBAB478

“C” Size Cylinders

“D” Size Cylinders

“J” Size Cylinders

$19.99

$21.99

$25.99

Oxygen Roll Bag Cordura® Nylon

Fully padded to carry your oxygen cylinder, regulator and accessories.

Padded with a high density foam. A removable inner liner for ease of cleaning.

This bag has 6 pockets with tie down straps for your oxygen cylinder, elastic airway loops and a padded flap to cover the regulator for extra protection.

Handles run completely underneath the bag for support, has a nylon coated vinyl bottom for extra wear and has a shoulder strap.

Measures 91/2" diagonally x 201/2 " long.


This bag will hold a "C", "D", or a Jumbo "D" cylinder.

Colors: Green with white 3M™ Scotchlite™ Reflective Material,

Orange with orange 3M™ Scotchlite™ Reflective Material. Wt. 32 oz.

$88.99

RBAB838



Medical Bags

Oxygen Roll Bag

151

Fully padded to carry your oxygen cylinder, regulator and accessories. Padded with a high density foam. A removable inner liner for ease of cleaning. This bag has 6 pockets with tie down straps for your oxygen cylinder, elastic airway loops and a padded flap to cover the regulator for extra protection. Handles run completely underneath the bag for support, has a nylon coated vinyl bottom for extra wear and has a shoulder strap. 21"

L x 7" H x 2" D. A pocket is sewn on the outside of the bag.

There are 10 elastic loops with room for canullas, oxygen masks, and tubing. Colors: Green, Orange, or Royal Blue with white 3M Scotchlite reflective material. This bag holds a "C", "D", or a jumbo "D" cylinder $102.99

RBAB838PKT

"TUFF BOTTOM" Oxygen Bag G

E

An easy to carry oxygen bag with plenty of storage for adjunct airway equipment. End outside pocket has divided sleeve for extra items. Inside there is ample storage for up to a jumbo "D" oxygen bottle along with side divided storage straps, divided nylon mesh easy access pockets and two nylon zippered mesh pockets on the zippered top. ABS molded cylinder holder keeps the oxygen bottle secure. The inside storage is accessed by double self healing zippers. A molded handle on the end of the bag makes it easy to pull from storage compartments. Carrying handles with quick release powered suction device or extrications collars. A 2" adjustable carrying strap with padded shoulder pad allows this case to be easily shoulder carried to allow free access of the rescuer's hands. Color: Green. $94.99

RBAB965IM

Dimensions: 22 1/2" L x 8 1/2" D x 7" H. Wt. 40 oz. Total of 1374 cu. in.

A

R

B

A

G

S

Roll Up Intubation Pouch Kit Bag

A roll-up intubation kit that consist of four large pockets for packaged and miscellaneous items. 14 slot pockets for handles and blades and 17 elastic loops for airways and other related items.

A full length flap helps secure equipment.

Measures 14" x 29".

Wt. 12 oz.

$45.99

RBAB259

Rigid bottom with

3 outside pockets and 2 inside pockets.

Measures 12

1/2" L x 7" W x

7" H. 600 cu. in.

Wt 14 oz. Colors:

Royal blue with star of life, Red with maltese cross, Black plain.

Made of

$32.99

RBAB58

Roller Gear - A Trauma Case With Wheels

$232.99

RBAB850NV

A special combination of a Samsonite® Silhouette® 4 case on wheels with an interior design by R & B Fabrications, Inc. A special ABS liner has been molded to fit inside this hardcase, which will hold a "C" or "D" oxygen cylinder. The case has been lined with removable Velcroed pockets and other special retainers for EMS equipment.

Case can be carried, or simply raise the handle, and pull the case along with you. Two sturdy wide-track wheels give the case excellent balance. Skid plate helps protect case when pulled over stairs or curbs. The extendible handle has a retractable web strap for added carrying ability. This is ideal for intercity, highrise office and apartment complexes.

Commercial and industrial suited. Measures 8" x 141/4" x 22". Wt. 11 lbs. 5 oz.


G

E

A

R

B

A

G

S

152

Medical Bags


Burn Kit Bag Injectable Meds Kit

Use this bag to make up your own burn kit. Has web handles and dee rings to hang it up.

Measures 13"H x 11"W x

7"D. 1000 cu. in

Wt. 9 oz.

$20.99

RBAB177

Two compartments of high density pluck foam die cut in 1/2" squares. Heavy duty #10 YKK zipper with lockable zipper slides. Measures: 12" x 9" x

3". Wt. 14 oz.

$71.99

RBAB265

Multiple Injury Supply Pack

When disaster strikes and you multiple injuries, are you ready to respond with an organized pack that has numerous supplies for mass casualties? This pack is designed for treating patients in an open scene environment or in a field clinic situation. The pack features 16 zippered pockets

$267.99

RBAB215 constructed of heavy clear vinyl and nylon. The stored supplies are easily visible and accessible. A variety of pocket sizes allows for supplies to be stored in their original containers or loose. Three strong plastic hooks and straps allow for the pack to be hung in a tent, from a vehicle or wall. The pack can be stored in the

Cordura bag that has double zippers for easy access and security.

The outside storage bag is available in the following colors: Gray, Yellow, Red,

Royal blue and Green. The internal components are always gray.

Disaster Bags

A disaster bag

(a.k.a. Body Bag) made of heavy coated woven polyethylene with a straight zipper and

6 web handles.

Measures 35" x

80".

Color: Black.

RBAB180BK

Plain Bag No Handles

$27.99

RBAB180H

Plain Bag with Carry

Handles

RBAB180U

Plain Bag with “U” Zipper and Handles

$36.99

$45.99

Head Block/Blanket Pack

$17.99

RBAB450

This pack is designed to carry head blocks for cervical immobilzation devices or can be used to store blankets.

The pack keeps the equipment clean yet ready for use. Made from nylon that is durable and easy to clean. A large white coated area for labeling allows for the contents to be easily identified. Adjustable

Velcro closure and nylon carry handle make this a convenient pack for storage of equipment.

Measures: 21" L x 17" W x 5" D.



Medical Bags

153

Pediatric Pack

Be prepared when dealing with pediatric emergencies. This compact Pediatric Pack keeps all the equipment needed for pediatric emergencies organized without needless repetition of supplies.

The outside front pocket has ample room for a Child BVM, Infant BVM and a 1000cc IV Pack stored without crushing the equipment. The double self healing zippers allow easy access to the interior storage which has abundance of storage for advanced and basic supplies. Elastic straps hold the intubation equipment and a standing divider with nylon pockets for items ranging from pediatric sizing guides to oxygen equipment. The quick release handles allow the bag to be quickly open and closed, securing equipment even with the zippers open. Constructed of tough

Cordura® nylon and Scotchlite™ this pack will offer superb wear. The back of the pack is heavy vinyl allowing durability and easy cleaning. The real versatility of this pack is the light weight and organization versus other packs that are weighted down with redundant supplies. Dimensions:

13” L x 6 1/2” D x 14” H. Wt. 40 oz. Total of 1183 cu. in. Color: Purple.

$55.99

RBAB926IM G

Cervical Collar Bag long x 10" high x 3" wide.

Wt. 8 oz.

Short Accessory Pocket

$20.99

Designed to hold a set of cervical collars.

It has a Velcro® closure and a web carrying handle. Made of

Cordura® nylon.

Measures 26"

An accessory pocket measuring 5 1/2"L x 5

1/2"H with a on the flap and

2" x 5 1/2" Velcro® loop on the bottom. Wt. 3 Oz. 30 cu. in.

Colors: Orange, Green, Red, Yellow clear top,

Velcro® closure

$8.99

RBAB471

RBAB685

E

A

R

B

A

G

Long Accessory Pocket Clear Pockets

S

An accessory pocket measuring 13"L x 6"H.

It has a clear top,

Velcro® closure on the flap with a 2" x 13"

Velcro® loop on the bottom.

7"W x 4"H x 4"D

Velcro®/flap.

Clear vinyl accessory bags to be used in

Trauma Bags for storing

Wt. 4 oz. 80 cu. in.

$12.49

RBAB472

$8.99

RBAB513 gloves, bandages, tapes and other small items that are difficult to keep track of.

Spinal Immobilization Case

A Spinal Immobilization Equipment Case.

This kit will hold the essentials needed for spinal immobilization on a backboard, such as a set of cervical collars, head blocks, backboard straps and a Ked® type extrication device.

Made of nylon pack cloth.

Color: Green.

Wt. 22 oz.

$73.99

RBABESP13


154

Bicycle Racks & Bags


G

E

A

R

Bicycle Medic Bag

This carry bag has been designed for the bicycle medics. It has large and small storage compartments with dual zippers and storm flaps. A 1 3/8" 3M Scotchlite reflective strip is located on the front compartment.

The hideaway zippered map pouch is perfect for referencing location or additional storage of medical supplies. The map flap tucks behind the floating front pocket when not in use.

The map is protected by marine-grade vinyl.

Also included is a quick-release handle bar mount system. This allows the rescuer to quickly remove the bag as needed. A carry handle allows the bag to be used when disconnected from the bracket.

The three-point system usually requires no tools for installation or removal. Three webbing and cam buckle systems lock the mount to most stems and the front face plate pivots to fit both mountain and road bike geometry. To remove the bag, push forward on the center tongue and pull lightly up on the pack. Detailed mounting instructions located inside each bag.

Wt. 23 oz.

Colors: Royal or black.

$81.99

RBAB1306

Dimensions:

Main compartment: 7.5: (h) x 9.5" (w) x 3.5" (d)

Small compartment: 4.5" (h) x 8" (w) x 2.5" (d)

Map compartment: 7" (h) x 8" (w)

Overall size: 7.5" (h) x 9.5" (w) x 6" (d)

B

A

G

S

Bicycle Trauma/02 Pack

A top mount dual purpose bag which may be used as a trauma bag or an oxygen setup. The main compartment measures 101/2"L x 71/2"W x 8"H with a padded end pocket measuring 71/2"W x 6"H x 3"L along with two side pockets and a pocket for two water bottles. A HDSR polypropylene divider provides protection and adds body to the main compartment. When used for oxygen, the polypropylene shell stabilizes the oxygen "C" cylinder. The valve and regulator extends into the highly padded end pocket. The Bikers Trauma/O2 pack attaches to the rack with Velcro® straps and side release buckles.

Made of 1000 denier Cordura® nylon, the bottom of the bag is nylon reinforced vinyl for easy cleaning, and has self repairing #10

YKK nylon zipper with a storm flap. White 3M™

$111.99

RBAB1310

Scotchlite™ Reflective Material and a star of life.

Wt. 40 oz.

Extra Clips for Pack Rear Bike Rack for Medic Packs

These are used to secure the RBAB1310

Trauma/O2

Pack to the rack. With an extra set of clips you can when interchanging bags. All #1310's come with one set. leave them on the bike rack

Pack of 2.

$4.99

RBAB1311

$76.99

RBABEXPRACK

For the original #1310 Trauma/O2

Pack Bag.

The Expedition rack is the rack of choice for cyclists who require exceptional durability and expanded size.

Built from 3/8" 6061 aluminum stock, the Expedition Rack is intended to be used primarily where additional rear clearance may be needed for large loads.

The secret to this rack's tremendous strength is a third support strut which angles back 21° from the main loadbearing strut. In addition, the rear support strut offers a 6" long section for attaching the lower portion of your panniers' suspension system to enable precise positioning of your load. All stress points are double-welded. Mounting hardware included. Wt. 36 oz.


Get Your Medic Bike Gear

Bicycle Packs

155

Left Side O2/BVM Pack

Measures 15"H x 12"W x 7"D for

1,250 cu. in. of space. Wt. 80 oz.

$94.99

RBAB1323

Designed to hold a "C" cylinder and a BVM on the back side with four clear vinyl pockets. Made of

1000 denier Cordura® nylon, the back side of the bags are nylon reinforced vinyl for easy cleaning and have self repairing #10 YKK nylon zipper with a storm flap.

White 3M™ Scotchlite™

Reflective Material trim and a star of life.

Color: Black or Royal Blue.

6 Pocket Bike Bag

This pannier consists of 6 pockets of different sizes with 3 in the flap and 3 on the back side. The pockets have clear vinyl flaps to view the contents. The pockets allow you to carry loose items, pre-packaged supplies or specialty kits. These can be used as a pair or matched up with either the #1323 O2/BVM pannier or the

#1326 AED pannier.

Made of 1000 denier Cordura® nylon, the back side of the bag is nylon reinforced vinyl for easy cleaning and has self repairing #10 Ykk nylon zipper with a storm flap.

Right Side AED Pack

The AED pannier has a pocket measuring

14"H x 34" in circumference which is sufficient room for practically any AED on the market. Four clear vinyl pockets on the flap for miscellaneous supplies. This is a right side pannier because most bikes would fall to the left or be laid down on the left, thus protecting the AED.

Made of 1000 denier Cordura® nylon, the back side of the bags are nylon reinforced vinyl for easy cleaning and have self repairing #10 YKK nylon zipper with a storm flap.

White 3M™ Scotchlite™ Reflective

Material and a star of life.

G

Measures: 15"H x 12"W x 7"W for 1,250 cu. in. of space.

Wt. 80 oz. $97.99

RBAB1326

E

A

R

B

A

G

S

White 3M™ Scotchlite™ Reflective

Material and a star of life. $105.49

RBAB1363

Measures: 15"H x 12"W x 7"W for 1,250 cu. in. of space. Wt. 80 oz.

Choose left or right side

Medical Fanny Packs

The Large pack has a U-shaped zipper around top. Made of Cordura® nylon. White silkscreened "Star of Life".

Color: Orange only Measures 15" x 7" x 6". 630 cu. in.

$21.99

$15.99

$14.99

RBAB500

RBAB502

RBAB501

Large

Medium

Mini

The medium fanny pack was designed to hold personal protection items such as one way mask, etc.

Made of orange Cordura® nylon with a 11/2" web belt.

Measures 9 1/2" x 5" x 3".

The mini fanny pack was designed to hold personal protection items such as one way mask, etc.

Made of orange Cordura® nylon with a 11/2" web belt.

Measures 7" x 4" x 3".


B

A

G

S

156

Sling Pack Bags

The Mega Pack II


Large backpack/trauma pack with 33 pockets. There are 4 outside sewn on pockets with mesh slot pockets. Outside and inside pockets are interchangeable. Self-sealing zippers protect equipment. All outside pockets have an interlocking web and snap attachment system.

Inside pockets consist of 3 pouches for 1000cc IV solutions, 3 IV pockets for starter kits, 6 inside pockets removable & attached with Velcro, 4 clear large pockets 9 1/2" x 5 1/2" x 2

1/4", 2 clear pockets 6" x 5 1/2" x 2 1/4", 4 large Cordura pockets 9 1/2" x 5 1/2" x 2 1/4", 2 pockets Cordura 6" x 5 1/2" x 2 1/4". Plenty of room inside for your specific kits. Full military style harness with padded shoulder and waist support with a molded carrying handle.

Harness can be easily removed with 4 side release buckles and the pack becomes a large trauma bag. Add in a #474OR Oxygen cylinder sleeve and #471 small accessory pouches and you are completely ready for any emergency. Color: Gray. Dimensions: (main body) 21"

H x 15" W x 8" D. Wt. 144 oz.

$674.99

RBAB376

G

E

A

R

Dimensions: Main compartment: 7.5: (h) x 9.5" (w) x 3.5" (d)

Small compartment: 4.5" (h) x 8" (w) x 2.5" (d)

Map compartment: 7" (h) x 8" (w)

Overall size: 7.5" (h) x 9.5" (w) x 6" (d)

Sling Packs

An over the shoulder pack/trauma pack for patient assessment and initial patient care. R&B's Sling Pack allows easy carrying by just slinging it over your back. A molded carrying handle allows for the rescuer to grab the pack quickly. Constructed of laminated foam cordura for durability. The pack has an outside pocket with airway loops and 2 slot pockets. Inside it shows adding the optional removable pockets, 6 each of the #471 pockets and 1 of the #473 pocket. Dimensions: 16" H x 13"

W x 6" D. Wt. 47 oz. Colors: Royal, Orange and Gray (with no star of life).

$154.79

RBAB361E

Sling Pack w/ Inside Pockets

$215.99

RBAB361

An over the shoulder pack/trauma pack for patient assessment and initial patient care. R&B's Sling Pack allows easy carrying by just slinging it over your back. A molded carrying handle allows for the rescuer to grab the pack quickly. Constructed of laminated foam cordura for durability. The pack has an outside pocket with airway loops and 2 slot pockets. Inside it includes 7 removable pockets, 6 each of the #471 pockets and 1 of the #473 pocket. You can also add the #249BK hip pouch.

Dimensions: 16" H x 13" W x 6" D. Wt.

47 oz.

Colors: Royal, Orange and Gray (with no star of life).

Sling Pack Pouch

$15.79

RBAB249BK

Hold your shears, pager or cell phone, gloves and etc. for easy accessibility. This is made to either attach to your belt or the #361, Sling Back

Pack.Color: Black


Bags you need!

RBAB365C Shown

Gear Packs

157

Urban Rescue Pack Large

A true rescue back pack with a wide variety of uses from the mountains, to air service, or a squad.

Main compartment is fully padded with closed cell foam for protection. All internal pockets are held in place by Velcro® and are removable. The back pack has a web carrying handle and padded contoured shoulder straps, chest strap and waist strap. A false back allows for storage of shoulder straps when not needed.

The front outside has a zippered storage compartment 10" W x 15" H x 3" D. On each side is a removable pocket 5" W x 11" H x 2" D. 3M™ Scotchlite™ Reflective Material strips are sewn on three sides.

Silk-screened with a white "Star of Life".

Made of 1000 denier Cordura® nylon with a #10 YKK heavy duty self repairing nylon zipper.

Color: Orange, Navy or Black. The Black does not have a Star of Life or reflective trim. The main compartment flap has an 18" slot pocket and six attached clear vinyl compartments. Will hold a "C" or "D" size oxygen sleeve or may be rearranged without an oxygen tank. Measures 11" W x 20" H x 6" D.

RBAB365A

9 small pockets, 1 long pocket no oxygen cylinder sleeve $271.99

RBAB365C

6 small pockets. 1 long pocket, 1 "C" cylinder sleeve $252.99

RBAB365D

5 small pockets. 1 long pocket, 1 "D" cylinder sleeve

RBAB365E

No pockets or cylinder sleeve

$245.99

$121.99

Locker Gear Bag

G

E

A

R

Urban Rescue Pack Medium

RBAB370A Shown

6 small pockets, 1 long pocket no oxygen cylinder sleeve.

A four inch shorter version of the large urban rescue back pack with the same outside features with the exception of no waist strap.

This size will hold only a "C" cylinder or it may be removed and more pockets added. The main compartment lid has five attached clear vinyl compartments.

Measures 11"W x 16"H x 6" D.

RBAB370A

6 small pockets, 1 long pocket no oxygen cylinder sleeve

RBAB370B

4 small pockets, 1 long pocket, 1 "C" cylinder sleeve "C" only

RBAB370E

No pockets or cylinder sleeve

$183.99

$185.99

$121.99

Just the thing for easily locating clothing, toiletries and other personal items right on your locker door. You may hang it, attach it, or hook and loop it to your locker. Features six roomy pockets, a place for a few writing utensils, your keys, and has a carry handle. Constructed of

B

A

G

S

Cordura® Plus nylon, heavy

$29.95

duty webbing, hoop and loop fasteners, and grommets.

Uniform/Garment Bags

A great way to protect your class-A uniform or your suits for travel. Features a side zippered opening and has a large zippered pocket for your shoes or undergarments. Also folds in half and has a padded shoulder strap for easy carry.

$63.99

FIP23111

Toiletry Bags

This handy toiletry bag has two separate pockets for your stuff. The side handle lets you clip it over towel bars. Constructed of Cordura® Plus nylon, heavy-duty buckle, webbing and YKK® $18.95

FIP95114 zippers

The Haz Pac Bag has a large opened zipper pouch so you may see all of the items at a glance. It also features a carry handle and a side zippered pocket to place such things as a comb, $17.95

FIP94127

158 INDEX OF PRODUCTS

A

ADZ Bar.....................................................96

All Purpose Hooks.....................................84

Ammunition Holders..................................63

ANSI Clothing.......................................79,80

ANSI Vests......................................76,77,78

Arrow Boards, ortable...............................46

Auto Rescue Kit.........................................93

Axes...........................................................88

B

Back Up Alarms.........................................32

Badges.................................................54-61

Badge Holders...........................................62

Bail Out Systems..................................98,99

Barricade Tape..........................................45

Barricades.................................................45

Barricuda Rescue Saw..............................95

Baton Holders............................................63

Battering Rams.....................................93,96

Belts, Duty.................................................63

Belts,Work/Tool................................105-107

Belt Keepers..............................................63

Bicycle Medical Packs......................154,155

Bicycle Rack for Med Packs....................154

Blades, Saw.............................................120

Body Bags...............................................152

Bolt Cutters................................................94

Books....................................................52,53

Boston Rake Hook....................................85

Brackets................................................34,35

Bunker Pant Suspenders.........................110

Buoy.........................................................115

Burn Kit Bag............................................152

C

Cabinetry..............................................40-44

Cable Cutters.............................................94

Captain’s Hook..........................................87

Can Straps..........................................89,108

Carry Straps...........................89,107108,111

Cases, Radio............................................65

Cell Phone Cases......................................66

Chain Saws.............................................121

Chemical Holders......................................64

Chemical Lights.......................................129

Chimney Hook...........................................86

Chocks.....................................................112

Cold Water Suits......................................116

Collar Brass...............................................59

Concrete Saws.................................121,122

Concrete Breakers...................................122

Consoles...............................................36,37

Combination Hooks...................................84

Computer Mounts......................................38

Crow Bars..................................................96

Cuff Cases.................................................63

F

Facpiece Bags.........................................138

Fanny Packs............................................155

Fans..................................................130,131

Farr Bar.....................................................91

FESH system............................................98

Firefighting Gloves....................................74

Flashers.....................................................32

Flashlights........................................125-128

Flashlight Holders, Duty Belt.....................64

Flare Containers........................................49

Brackets................................................49

Flares Fusse Road

Flares.................................49

LED........................................................42

Strobe.....................................................42

G

Gator Back Hook.......................................85

Gas Mask Bags.......................................138

Garment Bags.........................................157

Gear Bags........................................142-157

Generators...............................................132

Gloves..................................................70-75

Glove Keepers..................................108,109

Goggles...................................................134

Grapnel Hooks...........................................95

Griff Hook..................................................87

Grille Lights...................................8,10,12,13

H

Halligan Tools............................................90

Handlights.........................................124,127

Harness...................................................106

Hats...........................................................80

Hat Badges................................................60

Haul Straps..............................................107

Haz-Mat Gear Bags.................................144

Headlight Flashers.....................................32

Helmets, Firefighting................................137

Helmet Lights...........................................126

Helmet Shields........................................136

Hide-A-Way Lights.....................................11

Hockey Puck Lock Breaker.......................93

Hooligan Hooks.........................................87

Holsters.....................................................64

Hooks...................................................84-88

Hook System.............................................87

Hose Carriers, Hi-Rise Packs..................111

Hydra Rams...............................................92

Hydrant

Lay Straps.............................................111

Markers...................................................51

Flags.......................................................51

Hydrant Storz.........................................51

Tools.................................................97,111

D

Dash Lights..............................................4-7

Brackets.......................................................7

Deck Lights.............................................. 6-9

Disaster Bags..........................................152

Door Markers...........................................112

Door Chocks............................................112

Drag-U-Safe..............................................99

Dress Gloves.............................................73

Dry Wall Hooks..........................................84

Duck Bill Tool.............................................93

I

Ice Rescue........................................115-117

I.D.Holders................................................62

Incident Command

Boards...............................................81,82

Cabinets.................................................43

Flag........................................................81

Kits, Command.......................................81

Light, Strobe...........................................82

Tags........................................................82

Vests.......................................................83

E

Ecker Hook................................................85

Elevator Keys............................................94

Embroidery.................................................69

Extinguisher Carry Slings..........................89

Extinguisher Truck Mounts........................89

Extrication Gloves......................................73

Extrication Hack Saw.................................95

EVAC Chairs............................................114

Eyewear............................................133-135

J

“J” Hook.....................................................95

Jackets.......................................................68

Jonny Bar...................................................91

K

“K” Tool Kit.................................................92

Kelly Tool...................................................91

Key Holders...............................................63

L

Ladder Boots..........................................103

Landing Zone Kits.....................................48

Lapel Insignias.....................................60,61

Law Enforce Gear Bag .....145,146,156,157

LED Lights

Dash....................................................5,6

Deck...............................................8,9,10

Exterior/Surface Mount.........................13

Grille..........................................8,9,10,13

Hide-A-Way...........................................11

Light Bars...................................17,19-22

Interior...............................................22

Light Bars............................................17-22

Commander.........................................20

Message..............................................20

Phantom..............................................22

Prompter..............................................20

Sleeker.............................................16,19

“V” Force ............................................21

Light Towers............................................124

Light Balloon...........................................124

Locker Gear Bags...................................157

LumiNiteLightt.........................................123

M

Man Hole Cover Puller..............................96

Map Lights................................................34

Maxx Tools.................................................91

Medical Gear Bags...........................147-157

Medical Gloves..........................................75

Medical Sling Packs................................156

Mini Pro Bars.............................................90

Mini Light Bars.....................................14-16

Mirror Mount Lights.................................6,13

Motorcycle Accessories.............................31

Motorcycle Gloves.....................................71

Multi-Purpose Gloves................................70

N

Nameplates...............................................58

O

“O” Bar.......................................................90

Officers Hook.............................................87

Officers Tools.............................................90

Outside Vent Hook....................................86

Oxygen Gear Bags....................148,150,151

P

Pad Lock Breaker .....................................93

Pager Cases..............................................66

Pant Keep Downs....................................107

Pants, ANSI...............................................80

Parade Gloves...........................................73

Partner Saws...........................................119

Pediatric Pack Bag..................................153

Pike Poles..................................................88

Portable Barricades...................................45

Portable Generators................................132

Portable Pumps..................................96,132

Postal Gloves............................................45

PPV Fans................................................130

Prividence Pierce Hook.............................85

Pro Bars.....................................................90

Push Bumpers...........................................39

R

“R” Tool Kit.................................................92

Radio Cases..............................................65

Radio Straps..............................................65

Radio Organizers.......................................37

Rescue Saw...............................................97

Rescue Shovel..........................................97

RIT equipment..................................100,101

Rex Tool.....................................................90

Road Cones

Ez-Stor...................................................46

Standard................................................49

Roof Pro Bar..............................................91

Roof Hooks................................................84

Rope Bags........................................103,104

Rotating Lights...........................................30

S

Safety Eyewear................................133-135

Safety Vests.........................................76-78

San Francisco Hook..................................86

Saws, Blades,kits.............................118-122

SCBA Brackets.................................140,141

SCBA Bottle Carrier.................................140

SCBA Cylinder Staging Mat....................139

SCBA Facepiece Bags............................138

SCBA Identifiers......................................139

SCBA Mask Straps..................................140

SCBA Seats.............................................141

SCBA Smoke Trainer insert....................139

Scene Lighting..................................123,124

Shirts

Sweatshirts.............................................79

T-shirts, Safety.......................................79

Shooting Gloves........................................71

Shorts ANSI...............................................80

Shove Knives............................................93

Sirens...................................................26-28

Skid Plates................................................39

Sledge Hammers.......................................88

Sling Packs..............................................156

Slip Lock....................................................93

Snap Lights.............................................129

Spanner Wrench........................................97

Speakers..............................................26,29

Speed Bumps, Portable.............................46

Spinal Immobilization Case.....................153

Spring Punch.............................................93

Strobes

Grille....................................................9,12

Hide-A-Way............................................11

Light Bars................................17,18,19,21

Mini Light Bars..................................14-16

Stand Alone Units...................................23

STOP Signs...............................................47

Storz..........................................................51

Sweatshirts

Job Apparel...........................................67

ANSI......................................................79

Switch Boxes andSwitches.......................33

T

“T” Hook.....................................................86

Tactical Gloves..........................................71

Tie Clips.....................................................61

Traffic Directors....................................24-25

Traffic Flags...............................................50

Traffic Safety Gloves.................................72

Traffic Safety Clothing..........................79,80

Traffic Safety Vests..............................76-78

Traffic Signs 36”-48”..................................50

Traffic Triangles.........................................50

Traffic Wands LED.....................................50

Trash Hook................................................85

Tri Twister Hooks.......................................87

Toiletry Bags............................................157

Tools.....................................................84-97

Tool Bags, Pouches.................................102

Tool Mounts...............................................89

Tool Straps........................................107,108

Trauma Bags....................................148,149

Trauma Case, Rolling..............................151

Turnout Gear Bags................................142-

U

Under Cover

Light Bars.....................................22,24,25

Sirens...........................................26,27,28

Universal Hook..........................................86

V

Ventilation Fans.......................................131

Ventilation Saws..................118,119,121,122

Vests, Traffic Safety..............................76-78

VisorLights...............................................6,7

W

Wallets.......................................................62

Water Rescue..................................115-117

Water Safety.Light....................................117

Webbing and Pouches.....................102,105

Wedges....................................................112

Wedge-Its.................................................112

Window Punch...........................................93

Work Shirts..........................................67,68

Z

Zip Wall....................................................113

See these and other great products inside our catalogue

See page 4 for the Popular

Dash Blazer

See page 81

See page 65

Only $179.99

See page 46

Incident Command

See page 50

Radio/Pager Cases

See page 114

Only $59.99

See page 133

Traffic Safety Equipment

See page 126

EVAC Chairs

See page 79

Only $12.99

See page 45

Helmet Accessories

See page 137

Job Apparel

See page 124

Only $9.99

Emergency Responsder Products LLC

PO Box 353

Old Bethpage, NY 11804

Helmet as low as $189.00

Portable Lighting

www.911erp.com

877-572-9592