VWR International | 1350FM | User manual | VWR Contant Temperature Oven Brochure
Add to my manuals
22 Pages
advertisement
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us: (888) 88-SOURCE | [email protected] | www.artisantg.com
When you want to put heat on, there’s no better choice than
VWR Ovens
VWR Constant Temperature Ovens
Clockwise from left: Model 1685, Model 1380FM and Model 1410
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2 High Performance Horizontal Air Flow Ovens
Model 1670, 1675, 1680, 1685, 1690
Table of
Contents
VWR Signature ™
High Performance
Horizontal Airflow Ovens . . . . . . . . . 2-3
VWR Signature
Horizontal Airflow Ovens . . . . . . . . . 4-5
VWRbrand ™ Forced Air Ovens . . . . . . . 6
VWR Signature
Gravity Convection Ovens . . . . . . . . . . 7
VWRbrand
Gravity Convection Ovens . . . . . . . . . . 8
VWRbrand Utility Ovens . . . . . . . . . . . 9
VWR Signature Safety Ovens . . . . . . 10
VWR Signature
Clean Room Ovens . . . . . . . . . . . . . . 11
VWR Signature
Depyrogenation Oven . . . . . . . . . . . . 12
VWR Signature Asphalt/
Corrosive Material Ovens . . . . . . . . . 13
VWR Signature Vacuum Ovens . . . . . 14
VWR Signature
Model 1495D Vacuum Oven . . . . . . . 15
VWRbrand Vacuum Ovens . . . . . . . . 16
VWR Signature Safety
Vacuum Ovens . . . . . . . . . . . . . . . . . . 17
VWRbrand Safety Vacuum Ovens . . . 17
Price List . . . . . . . . . . . . . . . . . . . . . . . 19
VWR Signature ™
High Performance
Horizontal
Airflow Ovens
The VWR Signature High Performance
Ovens feature a horizontal airflow pattern that dries, bakes or cures…no matter what size the load. They offer precise state-ofthe-art temperature control.
Designed for
Horizontal airflow uses a turbo blower that re-circulates air over the heating element,
continuous drying at temperatures
providing fast heat up and recovery times; and ensuring a more rapid and efficient rate of drying. By forcing continuously
up to 325°C
warmed air into the chamber, the turbo blower assures uniform heating across all shelves and to every area of the chamber, eliminating concerns about obstructed air, regardless of how the shelves are loaded.
This true one-pass airflow combined with large adjustable intake and exhaust vents makes it easy to adapt the oven to specific tasks. It also makes these the fastest, most energy efficient ovens on the market today.
Programmable temperature controller.
The Watlow microprocessorbased controller provides
24-step ramp and soak capability to an accuracy of 0.1˚C. Other ramping operations include ramp-rate or time-based programming, guaranteed soak deviation, program looping and program status selection after power outages.
Easy, non-ramping set point operation is also available.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
High Performance Horizontal Air Flow Ovens
Energy efficient to help lower operating costs.
To maintain temperature uniformity and stop heat loss, VWR Signature Series
Ovens use a 3 1 ⁄
2
-inch thick, double-layer-insulating barrier of high-density alumina silicate and high temperature fiberglass around all five sides of the chamber. The double-layer configuration will not break down or settle from heat exposure, so years from now you still expect this oven to perform. What’s more, seams are staggered to avoid gaps and subsequent heat loss, thus ensuring the oven is cool to the touch. A high temperature silicone rubber door seal eliminates air leakage. In addition, the door latch and hinges are user adjustable to maintain a better seal as metal expands and contracts over the life of the oven. These features allow VWR Ovens to finish their work when you do, so you don’t need to leave them on overnight.
Low maintenance motor.
Motor burn out is a common source of oven down time.
The unique VWR design helps eliminate this problem by using a second fan to dissipate heat away from motor bearings. Since bigger bearings generally operate longer than little ones, VWR uses an oversized motor with oversize bearings to increase the longevity of the motor. Furthermore, to minimize heat transfer from the oven chamber to the motor, a half-inch diameter stainless steel shaft replaces the metal shaft that comes standard with motors because stainless is not a good conductor.
Safety features.
user adjustable and protects the unit against damage to contents and burnout in the unlikely event that the main controller fails. The sealed membrane touch-pad control panel guards against any harm to the electronics.
Key features:
• Type-304 stainless steel interior and exterior for maximum corrosion resistance
• Durable powder coat paint exterior finish
• Three-inch intake and exhaust ports
• Adjustable stainless steel shelves
• Power exhaust accessory can be plugged into unit and run by Watlow controller
• Chart recorder outlet available on Models 1675,
1680, 1685 and 1690
• 24 month warranty on parts and labor
The independent overtemperature safety feature is
Cat. No.
Model
Capacity, Temperature ft.
3 Style Range Uniformity
Recovery,
Minutes Minutes
Dimensions*,
W x D x H in.
Watts/Amps
VWR SIGNATURE ™ HIGH PERFORMANCE HORIZONTAL AIRFLOW OVENS
52201-754 1670 4.4 Medium, 2 Shelves 40°C to 325°C ±0.5°C @ 100°C 15 @ 100°C 5 @ 150°C Int: 20 x 20 x 19 3000/12.5
±1.4°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 32.5 x 27.25 x 38
±2.2°C @ 260°C
52202-054 1675 10.4 Large, 3 Shelves 40°C to 325°C ±1.0°C @ 100°C 15 @ 100°C 5 @ 150°C Int: 30 x 20 x 30 6300/26.5
±1.5°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 44 x 29 x 57
±2.2°C @ 260°C
52202-203 1680 14.6 Large, 2 Door, 40°C to 325°C ±1.0°C @ 100°C 15 @ 100°C 5 @ 150°C Int: 42 x 20 x 30 6300/26.5
6 Shelves ±1.5°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 59 x 29 x 57
±2.2°C @ 260°C
52202-258 1685 25.0 Floor, 6 Shelves 40°C to 325°C ±0.5°C @ 100°C 15 @ 100°C 5 @ 150°C Int: 32 x 25 x 67.25 11,900/49.6
±1.4°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 43 x 33 x 83
±2.5°C @ 260°C
52202-509 1690 37.9 Floor, 2 Door, 40°C to 325°C ±0.5°C @ 100°C 15 @ 100°C 7 @ 150°C Int: 44 x 25 x 54 11,900/49.6
12 Shelves ±1.4°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 68 x 33 x 80
±2.5°C @ 260°C
16000-220 1680-3 14.6 Large, 2 Door, 40°C to 325°C ±1.0°C @ 100°C 15 @ 100°C 5 @ 150°C Int: 42 x 20 x 30 5000/12
6 Shelves, 3-Phase ±1.5°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 59 x 29 x 57
±2.2°C @ 260°C
16000-222 1685-3 25.0 Floor, 6 Shelves, 40°C to 325°C ±0.5°C @ 100°C 15 @ 100°C 5 @ 150°C Int: 32 x 25 x 67.25 10,000/24
3-Phase ±1.4°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 43 x 33 x 83
±2.5°C @ 260°C
16000-224 1690-3 37.9 Floor, 2 Door, 40°C to 325°C ±0.5°C @ 100°C 15 @ 100°C 7 @ 150°C Int: 44 x 25 x 54 10,000/24
12 Shelves, 3-Phase ±1.4°C @ 200°C 25 @ 200°C 25 @ 200°C Ext: 68 x 33 x 80
±2.5°C @ 260°C
*Exterior dimensions include handle and exhaust port. • Volts: 208/230 • Cycle: 50/60Hz
Units must be hardwired. Power cord not supplied.
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
4 Horizontal Airflow Ovens
VWR Signature ™
Horizontal
Airflow Ovens
True horizontal airflow for fast uniform drying, curing and baking
The VWR Signature Horizontal Airflow Ovens use the same turbo blower system as our high performance models to deliver optimal temperature uniformity and recovery. The built-in microprocessor technology ensures stable control without temperature overshoot.
Model 1350FM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Horizontal Airflow Ovens 5
Unique airflow design.
With the true horizontal airflow design, heated air is directed into the ductwork on the right side of the oven. This slightly pressurized air escapes through the small perforations in the chamber wall, flows across each shelf picking up moisture, and is gently suctioned through large openings on the opposite chamber wall. This pattern encourages fast, uniform drying even when your shelves are loaded.
Steady, reliable, safe.
The microprocessor control capability assures optimal stability and allows for accurate temperature control. Temperature and time set points are even held in memory during power outages–a real timesaving advantage.
Convenient digital timer.
The digital LED electronic timer is conveniently located on the control panel and gives the user the capability of automatically turning off the oven at the end of an application cycle.
The timer has a range of
1 minute to 99 hours/59 minutes and is activated by an independent
ON/OFF switch.
Flexibility.
Ovens are used for three main purposes: drying, baking and curing. By positioning the damper on the exhaust port accordingly, the user can accomplish all three types of applications. The exhaust port is 3-inches indiameter, further aiding in drying time.
Built-in safety features.
There are no exposed heating elements in this oven series. This eliminates danger to the user and damage to the oven from spills within the chamber. An independent overtemperature safety controller with its own sensor provides extra protection.
Key features:
• True horizontal airflow pattern
• Three inch adjustable exhaust port
• Stainless steel interior and shelves
• Durable powder coat paint exterior finish
• Adjustable door latch and hinges
• Digital electronic timer
• Wrap around insulation for excellent heat retention
• 24 month warranty on parts and labor
Cat. No.
Model
Capacity, Temperature ft.
3 Style Range Uniformity Minutes Minutes W x D x H in.
Amps
VWR SIGNATURE HORIZONTAL AIRFLOW OVENS
52201-069 1330FM 1.6 Small, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 13 x 14 x 14.75 1750/14.6
110V Ext: 21.25 x 23.75 x 33
52201-084 1330FM-2 1.6 Small, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 13 x 14 x 14.75 2350/9.8
220V Ext: 21.25 x 23.75 x 33
52201-070 1350FM 4.0 Medium, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 18.25 x 19 x 16.5 1950/16.3
110V Ext: 27 x 25.5 x 34.75
52201-086 1350FM-2 4.0 Medium, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 18.25 x 19 x 16.5 2350/9.8
220V Ext: 27 x 25.5 x 34.75
52201-071 1370FM 5.9 Large, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 23 x 20 x 18.5 1950/16.3
110V Ext: 32.5 x 28 x 36.25
52201-088 1370FM-2 5.9 Large, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 23 x 20 x 18.5 2350/9.8
220V Ext: 32.5 x 28 x 36.25
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6 Forced Air Ovens
Model 1321F
VWRbrand ™
Forced Air Ovens
Durable, dependable general purpose ovens
These forced air ovens offer the benefits of mechanical convection but at an economical price.
Optimum uniformity.
Key features:
Optimum control.
The Models 1321F, 1325F, and 1327F feature an hydraulic temperature control, while the large capacity Models 1380FM and 1390FM have a microprocessor controller.
The independent overtemperature safety feature is user adjustable and provides added safety for the user.
The forced, blower-assisted airflow design offers excellent temperature uniformity and fast recovery. A turbo blower and heavy-duty motor combine to direct air over the shelves and samples for even, consistent drying, curing and baking.
Especially ideal for glassware drying.
Broad product offering.
There are several models to choose from in the forced air product line, both in size and control.
The large capacity units are perfect for high volume sample and drying applications, including production processes.
• Three-inch adjustable exhaust port
• Stainless steel shelves adjustable on 1 ⁄
2
" increments
• Independent overtemperature safety
• High temperature silicone door seal
• No exposed heating elements
• Wrap around insulation for excellent heat retention
• Durable powder coat paint exterior finish
• Digital timer (Models
1380FM, 1390FM)
• Thermometer and clip supplied (Models 1321F,
1325F, 1327F)
• 24 month warranty on parts and labor
Cat. No.
Model ft.
3 Style Range Uniformity Minutes W x D x H in.
Watts/Amps
VWRbrand FORCED AIR OVENS
16000-208 1321F 2.0 Small, 1 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22 @ 100°C Int: 16.875 x 12.5 x 17 800/6.6
110V Ext: 20.25 x 21 x 25
16000-210 1321F-2 2.0 Small, 1 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22 @ 100°C Int: 16.875 x 12.5 x 17 800/3.3
220V Ext: 20.25 x 21 x 25
16000-212 1325F 4.0 Medium, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22 @ 100°C Int: 15.875 x 17.5 x 22 800/6.6
110V Ext: 23.25 x 20 x 31
16000-214 1325F-2 4.0 Medium, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22 @ 100°C Int: 15.875 x 17.5 x 22 800/3.3
220V Ext: 23.25 x 20 x 31
16000-216 1327F 6.0 Large, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22 @ 100°C Int: 19.875 x 17.5 x 28 1050/8.8
110V Ext: 24 x 23.625 x 37
16000-218 1327F-2 6.0 Large, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22 @ 100°C Int: 19.875 x 17.5 x 28 1050/4.4
220V Ext: 24 x 23.625 x 37
52201-075 1380FM 13.9 Large, 3 Shelves, 110V, 40°C to 200°C ±1.8°C @ 100°C 14 @ 150°C Int: 31 x 25 x 31 3950/16.5
Microprocessor Ext: 37 x 35 x 48
52201-077 1390FM 27.8 Large, 6 Shelves, 220V, 40°C to 200°C ±1.8°C @ 100°C 14 @ 150°C Int: 31 x 25 x 62 5950/25
Microprocessor Ext: 37 x 35 x 80
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz • Phase: Single
NOTE: Models 1380FM and 1390FM available only in 220V current.
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Gravity Convection Ovens 7
Microprocessor technology and a unique air duct system provide you with outstanding temperature control and uniformity in these VWR Signature Gravity Convection ovens.
Stability and safety.
The microprocessor controller with push button calibration provides precise temperature and time setability. The controller even retains set points during power outages. The temperature and timer are displayed digitally on an easy to read LED.
Digital timer.
The digital LED electronic timer gives the user the capability of automatically turning off the oven at the end of an application cycle.
The timer has a range of
1 minute to 99 hours/59 minutes and is activated by an independent ON/OFF switch.
Unique heating system.
As air is heated in the gravity convection design, it rises to the top of the oven. The heated air is directed through an air duct system and enters the chamber through slots above each shelf. Even when shelves are fully loaded, this exclusive feature creates many different flow patterns to optimize uniformity. The exhaust port, located on top of the oven, aids in venting the oven and allows for flexibility in drying time.
Built-in safety.
A solid chamber floor eliminates danger to the user and prevents damage to the oven from spills, as there are no exposed elements. A resettable circuit breaker is standard in case of electrical malfunction. The overtemperature safety is
UL approved, user adjustable and independent of the main temperature controller.
Key features:
• Microprocessor control system
• Digital electronic timer
• Three-inch adjustable exhaust port
• Stainless steel interior and shelves
• Durable powder coat paint exterior finish
• Adjustable door latch and hinges
• Wrap around insulation for excellent heat retention
• 24 month warranty on parts and labor
VWR Signature ™
Gravity
Convection
Ovens
Designed for optimal temperature uniformity
Model 1350GM
Cat. No.
Model
Capacity, Temperature ft.
3 Style Range Uniformity Minutes Minutes W x D x H in.
Amps
VWR SIGNATURE GRAVITY CONVECTION OVENS
52200-205 1330GM 1.6 Small, 2 Shelves, 40°C to 240°C ±2.0°C @ 150°C 15 @ 150°C 10 @ 150°C Int: 13 x 14 x 14.75 1400/11.7
110V Ext: 21.25 x 23.75 x 33
52200-216 1330GM-2 1.6 Small, 2 Shelves, 40°C to 240°C ±2.0°C @ 150°C 15 @ 150°C 10 @ 150°C Int: 13 x 14 x 14.75 2000/8.4
220V Ext: 21.25 x 23.75 x 33
52200-209 1350GM 4.0 Medium, 2 Shelves, 40°C to 240°C ±2.0°C @ 150°C 15 @ 150°C 10 @ 150°C Int: 18.25 x 19 x 16.5 1600/13.4
110V Ext: 27 x 25.5 x 34.75
52200-218 1350GM-2 4.0 Medium, 2 Shelves, 40°C to 240°C ±2.0°C @ 150°C 15 @ 150°C 10 @ 150°C Int: 18.25 x 19 x 16.5 2000/8.4
220V Ext: 27 x 25.5 x 34.75
52200-215 1370GM 5.9 Large, 2 Shelves, 40°C to 240°C ±2.0°C @ 150°C 15 @ 150°C 10 @ 150°C Int: 23 x 20 x 18.5 1600/13.4
110V Ext: 32.5 x 28 x 36.25
52200-220 1370GM-2 5.9 Large, 2 Shelves, 40°C to 240°C ±2.0°C @ 150°C 15 @ 150°C 10 @ 150°C Int: 23 x 20 x 18.5 2000/8.4
220V Ext: 32.5 x 28 x 36.25
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz. • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
8 Gravity Convection Ovens
VWRbrand ™
Gravity
Convection
Ovens
Priced for the budget minded
Economically priced, yet have the features required for professional results in the lab. As with all VWR ovens, these units are durable and built to last.
Model 1310
Reliable performance.
These VWRbrand ovens feature a gravity convection design for efficient heating.
The double wall insulation and two inches of industrial fiberglass insulation help to minimize heat loss. The low watt density heaters keep temperatures uniform to ±4.0°C and require only
750 watts…keeping your energy consumption down.
Analog design.
A hydraulic temperature controller regulates a temperature range of 40 to
200ºC. An independent hydraulic overtemperature safety controller provides added operating safety.
Key features:
• Three-inch adjustable exhaust port
• Stainless steel shelves adjustable on 1 ⁄
2
" increments
• Independent hydraulic overtemperature safety
• High temperature silicone door seal
• No exposed heating elements
• Wrap around insulation for excellent heat retention
• Durable powder coat paint exterior finish
• Thermometer and clip supplied
• CSA approved
• 24 month warranty on parts and labor
Cat. No.
Model ft.
3 Style Range Uniformity Minutes W x D x H in.
Watts/Amps
VWRbrand GRAVITY CONVECTION OVENS
52201-297 1310 1.0 Small, 1 Shelf, 40°C to 200°C ±4.0°C @ 100°C 22@100˚C Int: 12 x 12 x 12 750/6.25
110V Ext: 16 x 17.5 x 18.5
52201-298 1310-2 1.0 Small, 1 Shelf, 40°C to 200°C ±4.0°C @ 100°C 22@100˚C Int: 12 x 12 x 12 800/3.3
220V Ext: 16 x 17.5 x 18.5
52201-300 1320 2.0 Small, 2 Shelves, 40°C to 200°C ±4.0°C @ 100°C 22@100˚C Int: 17 x 12 x 17 750/6.25
110V Ext: 21 x 17.5 x 23.5
52201-301 1320-2 2.0 Small, 2 Shelves, 40°C to 200°C ±4.0°C @ 100°C 22@100˚C Int: 17 x 12 x 17 800/3.3
220V Ext: 21 x 17.5 x 23.5
16000-200 1324 4.0 Medium, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22@100˚C Int: 15.875 x 17.5 x 22 750/6.3
110V Ext: 23.25 x 20 x 31
16000-202 1324-2 4.0 Medium, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22@100˚C Int: 15.875 x 17.5 x 22 750/3.1
220V Ext: 23.25 x 20 x 31
16000-204 1326 6.0 Large, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22@100˚C Int: 19.875 x 17.5 x 28 1000/8.3
110V Ext: 24 x 23.625 x 37
16000-206 1326-2 6.0 Large, 2 Shelves, 40°C to 200°C ±3.5°C @ 100°C 22@100˚C Int: 19.875 x 17.5 x 28 1000/4.2
220V Ext: 24 x 23.625 x 37
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Utility ovens feature a welded steel, insulated wall construction to keep the interior temperature uniform to ±4.0°C. Suitable for small work volumes.
Efficient performance.
Ovens achieve peak efficiency with less energy, lowering your electric costs. Temperature range is 40 to 180°C, regulated by a timed temperature controller. The bi-metal overtemperature safety feature protects against the possible main controller failure.
Key features:
• Three-inch adjustable exhaust port
• Flat punched shelves adjustable on 1 ⁄
2
" increments
• Independent bi-metal overtemperature safety
• Two inches of fiberglass insulation
• No exposed heating elements
• Safety circuit breaker
• Durable powder coat paint exterior finish
• Thermometer and clip supplied
• CSA approved
• 24 month warranty on parts and labor
Utility Ovens 9
VWRbrand ™
Utility Ovens
Reliable, low cost gravity convection design
Model 1300U
Capacity, Temperature Dimensions*, Watts/
Cat. No. Model ft.
3 Style Range Uniformity W x D x H in. Amps
VWRbrand UTILITY OVENS
52200-501 1300U 1.0 Small, 1 Shelf, 40°C to 180°C ±6.0°C @ 100°C Int: 12 x 12 x 12 550/4.6
110V Ext: 16 x 17.5 x 18.5
52200-502 1300U-2 1.0 Small, 1 Shelf, 40°C to 180°C ±6.0°C @ 100°C Int: 12 x 12 x 12 500/2.1
220V Ext: 16 x 17.5 x 18.5
52200-534 1305U 2.0 Small, 1 Shelf, 40°C to 180°C ±6.0°C @ 100°C Int: 17 x 12 x 17 550/4.6
110V Ext: 21 x 17.5 x 23.5
52200-535 1305U-2 2.0 Small, 1 Shelf, 40°C to 180°C ±6.0°C @ 100°C Int: 17 x 12 x 17 500/2.1
220V Ext: 21 x 17.5 x 23.5
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
10 Safety Ovens
VWR Signature ™
Safety
Ovens
Designed to meet your strictest safety needs
1330GMS
Manufactured with additional features to help you better meet your safety requirements.
Unique safety design.
Built to the same specifications as the VWR
Signature Ovens, these units feature a blow out back panel to better meet safety standards. The blow out back panel is designed to release in the event of an explosion within the chamber, directing the force away from the user and the lab. The user adjustable overtemperature control is an added safety feature.
Accurate control and heating.
All models are microprocessor controlled and the temperature is displayed digitally on an
LED. The Model 1330GMS features a gravity convection design, while
Model 1330FMS and
1350FMS are true horizontal airflow ovens.
Key features:
• Unique blow out back panel
• Microprocessor temperature controller
• Stainless steel interior and shelves
• Three-inch exhaust port
• Horizontal airflow or gravity convection
• Durable powder coat paint exterior finish
• Independent overtemperature safety
• 24 month warranty on parts and labor
Cat. No.
Model
Capacity, Temperature ft.
3 Style Range Uniformity Minutes Minutes W x D x H in.
Amps
VWR SIGNATURE SAFETY OVENS
52201-212 1330GMS 1.6 Small, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 13.25 x 14.5 x 14.75 1400/11.7
110V Ext: 22 x 22 x 33
52201-214 1330FMS 1.6 Small, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 13 x 14 x 14.75 1750/14.6
110V Ext: 21.25 x 23.75 x 33
52201-216 1350FMS 4.0 Medium, 2 Shelves, 40°C to 240°C ±1.5°C @ 150°C 10 @ 150°C 6 @ 150°C Int: 18.25 x 19 x 16.5 1950/16.3
110V Ext: 27 x 25.5 x 34.75
*Exterior dimensions include handle and exhaust stack. • Cycle: 50/60 Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Cleanroom Ovens 11
Constructed with the same advanced technology as our horizontal airflow ovens, these two cleanroom units feature a true horizontal airflow design via a turbo blower, low maintenance motor, energyefficient insulation, programmable digital controller and more.
Encapsulated insulation.
input up to a 24-step program with time-based or ramp-rate programming.
Class 100 air.
Insulation is encapsulated between fully welded airtight seams so fibers cannot invade the chamber and contaminate your work.
Nitrogen purging system.
The Model 1601 is equipped with a high efficiency particulate air (HEPA) filter to screen out 95% of the airborne particles as small as 0.3 microns. Plus, the stainless steel interior surface minimizes particulates as well.
A nitrogen supply inlet is standard on both models.
This creates a dry, oxygenfree atmosphere in order to reduce product oxidation.
The pressurizing action of the nitrogen also inhibits the entry of contaminants.
Programmable controller.
The Watlow PID
(Proportional Integral
Differential) controller provides 24-step ramp and soak with an accuracy of
0.1˚C and multiple levels of access. The controller can
Key features:
• Nitrogen purging capability
• Type-304 stainless steel interior and exterior parts
• Sealed membrane touch pad control panel protects electronics
• Encapsulated insulation
• Programmable temperature controller
• Three-inch adjustable intake and exhaust ports
• User adjustable overtemperature safety
• 24 month warranty on parts and labor
Model 1601
VWR Signature ™
Cleanroom
Ovens
Special features to protect your products and cleanroom against contamination
Cat. No.
Model
Capacity, Temperature ft.
3 Style Range † Uniformity Minutes Minutes W x D x H in.
Amps
VWR SIGNATURE CLEANROOM OVENS
52201-721 1601 3.7 Single Door, 2 Shelves, 40°C to 200°C ±0.7°C @ 100°C 15 @ 100°C 6 @ 150°C, Int: 16 x 16 x 19 4200/16.7
HEPA Filter ±1.8°C @ 200°C 25 @ 200°C 8 @ 200°C Ext: 32.5 x 27.25 x 38
±2.2°C @ 260°C
52201-710 1602 4.4 Single Door, 2 Shelves 40°C to 200°C ±0.5°C @ 100°C 10 @ 100°C 4 @ 150°C Int: 20 x 20 x 19 4200/16.7
±1.5°C @ 200°C 20 @ 200°C 6 @ 200°C Ext: 32.5 x 27.25 x 38
*Exterior dimensions include handle and exhaust port. Volts: 208/230 • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
12 Depyrogenation Oven
Model 1365
The Model 1365 Depyrogenation Oven gives you the benefits of high-priced depyrogenation ovens without the budget breaking cost.
working with RNA and pharmaceutical and diagnostic firms dealing with gene therapy.
High performance filtration.
VWR Signature ™
The oven features a DT HT filter on the air intake side which facilitates removal of airborne gram negative bacteria. Filter scores
40-50% on the ASHRE dust spot test.
Depyrogenation
Maximum heat retention.
Oven
Perfect for small
Versatile. applications
A plugged door provides maximum insulation and heat retention. Model 1365 also features mechanically convected horizontal air flow. Air flow is rated at 144
LFM ensuring quick, even drying of glassware.
Designed to operate at depyrogenation temperatures of 230°C -
250°C, this oven is perfect for small applications and cost-conscious labs. The
Model 1365 is also ideal for molecular biologists
Microprocessor controlled.
The Depyrogenation Oven is PID/Microprocessor controlled. Easy-to-read
LED timer lets you set application times up to 99 hours, 59 minutes, counts down “backward” and disengages the element at the end of set time.
Complete depyrogenation.
To insure complete depyrogenation, Model
1365 should be used in conjunction with a sterilizer and proper depyrogenation procedure for rendering glassware pyrogen-free (as described in USP manual, Vol. 23).
Key features:
• Ideal for small applications
• Maximum heat retention
• PID/microprocessor controlled
• 24 month warranty on parts and labor
Cat. No. Model ft.
3 Style Range Uniformity W x D x H in. Amps
VWR SIGNATURE DEPYROGENATION OVEN
13309-458 1365/220V 5.0 Small, 2 Shelves 40°C to 260°C ±2.0°C @ 250°C Int: 25 x 21 x 18 2000/9.5
Ext: 16 x 17.5 x 18.5
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Asphalt/Corrosive Material Ovens 13
Unique design.
The all stainless steel housing, screws and electronic control boards in these units are treated with a protective coating to guard against such damage caused by these materials and extend the life of your oven.
Mechanical or gravity convection.
Both mechanical and gravity convection are available in this product line. The models with the
"FZZ" suffix feature the true horizontal airflow for superior temperature uniformity. These units use a durable turbo blower system and non-exposed heating elements. Models with the "GZZ" suffix are gravity convection designs.
Key features:
• Microprocessor temperature controller
• Stainless steel interior and shelves
• Three-inch exhaust port
• Horizontal airflow or gravity convection
• Durable powder coat paint exterior finish
• Independent overtemperature safety
• 24 month warranty on parts and labor
VWR Signature
Asphalt/Corrosive
™
Material Ovens
Designed to withstand corrosion and damaging fumes
Model 1350FZZ
Manufactured specifically to resist the corrosive nature and damaging fumes of asphalt and other materials.
Cat. No.
Model
Capacity, Temperature ft.
3 Style Range Uniformity Minutes Minutes W x D x H in.
Amps
VWR SIGNATURE ASPHALT/CORROSIVE OVENS
52202-580 1330GZZ 1.6 Small, 2 Shelves 40°C to 250°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 13 x 14 x 14.75 1400/11.7
Ext: 21.25 x 23.75 x 33
52202-582 1350GZZ 4.0 Medium, 2 Shelves 40°C to 250°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 18.25 x 19 x 16.5 1600/13.4
Ext: 27 x 25.5 x 34.75
52202-584 1370GZZ 5.9 Large, 2 Shelves 40°C to 250°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 23 x 20 x 18.5 1600/13.4
Ext: 32.5 x 28 x 36.25
52202-590 1330FZZ 1.6 Small, 2 Shelves 40°C to 250°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 13 x 14 x 14.75 1750/14.6
Ext: 21.25 x 23.75 x 33
52202-592 1350FZZ 4.0 Medium, 2 Shelves 40°C to 250°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 18.25 x 19 x 16.5 1950/16.3
Ext: 27 x 25.5 x 34.75
52202-594 1370FZZ 5.9 Large, 2 Shelves 40°C to 250°C ±1.5°C @ 150°C 15 @ 150°C 6 @ 150°C Int: 23 x 20 x 18.5 1950/16.3
Ext: 32.5 x 28 x 36.25
*Exterior dimensions include handle and exhaust port. Volts: 110 • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
14 Vacuum Ovens
Model 1410M
True vacuum valves.
Durable vacuum valves with seats are located on the top edge of the unit for convenient pump connection. Standard high temperature silicone gaskets ensure a nonleaking seal around the door. Ovens will maintain a vacuum up to 10 microns or better.
Top accuracy.
The microprocessor controller results in precise temperature control.
Digital setpoint and display facilitate the control of the temperature in 1°C increments.
The dual door design helps maintain optimum temperature uniformity.
The inner door features a half-inch thick ( 3 ⁄
4
" on
Model 1450M) tempered glass observation window that resists breakage under vacuum and allows you to easily view your samples.
These units also feature all stainless steel interiors and exteriors for corrosion resistance and easy cleaning.
Unique contact heating.
These vacuum ovens utilize a unique contact heating system. The walls of the chamber are lined with heating elements. As there is no air in the chamber, heat is transferred to the samples via aluminum shelves that are in contact the walls of the chamber.
Convenient access port.
A one-inch port is located on the back of the vacuum oven chambers for easy connection of in-house pump systems and for external access with adapter.
(Adapter not included).
VWR Signature ™
Vacuum Ovens
Designed for superior performance
Cross flow ventilation.
The vacuum inlet is located on the top front and the bleed back inlet is in the bottom back. This configuration forces your inert gas to travel the greatest distance, passing over your samples and purging the chamber.
VWR Signature Vacuum Ovens offer many unique features to ensure superior performance.
Key features:
• True vacuum valves
• Unique cross flow ventilation
• Contact heating
• Microprocessor temperature controller
• Stainless steel interior and exterior
• Access port
• Independent overtemperature safety
• CSA approved
• 24 month warranty on parts and labor
Cat. No.
Model ft.
3 Style Range Uniformity Minutes W x D x H in.
Amps
VWR SIGNATURE VACUUM OVENS
52201-515 1410M 0.6 Small, Digital, 40–325°C ± 2.0°C @ 100°C 35 @ 100°C Int. 9 x 12 x 9 1410/8.3
3 Shelves, 120V/ ± 3.0°C @ 200°C Ext. 19 x 16 x 16
52201-516 1410M-2 220V 1100/4.6
52201-548 1430M 1.7 Medium, Digital, 40–260°C ± 2.0°C @ 100°C 35 @ 100°C Int. 12 x 20 x 12 1000/8.3
3 Shelves, 120V/ ± 3.0°C @ 200°C Ext. 25 x 25 x 21
52201-549 1430M-2 220V 1200/5.0
52201-650 1450M 4.5 Large, Digital, 40–260°C ± 2.5°C @ 100°C 70 @ 100°C Int. 18 x 24 x 18 1500/12.5
3 Shelves, 120V/ ±3.5°C @ 200°C Ext. 30 x 28.5 x 24
52201-651 1450M-2 220V 1600/6.7
*Exterior dimensions include handle and exhaust stack. • Cycle: 50/60 Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Vacuum Ovens 15
Versatile programmability.
The Watlow 981 temperature controller, programmable and microprocessor-based, offers multiple ramp and soak capabilities, including storing and running up to
24 temperature profiles.
Controls are easily adjustable and the control panel is user friendly. A digital vacuum gauge shows chamber vacuum level in measurements of
Torr and m/Torr. The display range is 760 Torr down to 0 mil Torr. A secondary independent high limit controller provides overtemperature safety protection.
Solid construction.
The oven chamber, wrapped in high temperature insulation, aids overall performance and promotes energy efficiency. All stainless
The nine cubic foot size of this VWR Signature Model 1495D general-purpose vacuum oven makes it ideal for research and industrial use. Common applications include drying heat sensitive samples, moisture determination and drying samples under a controlled atmosphere.
steel construction, true vacuum valves and crossflow ventilation through the oven chamber enhance total performance. Vacuum oven is secured to a ruggedly constructed mobile stand to create a vacuum station. The stand is designed for mounting a vacuum pump at the base.
Although the oven is not supplied with a vacuum pump, all vacuum plumbing and KF25 connections are provided.
Stainless steel is used for all vacuum tubing and connections.
Key features:
• Large 9 cu. ft. capacity
• Microprocessor temperature controller
• Stainless steel interior and exterior
• Access port
• Independent overtemperature safety
• 24 month warranty on parts and labor
VWR Signature ™
Model 1495D
Vacuum Oven
Designed for a variety of applications
Model 1495D
Cat. No.
Model ft.
3 Style Range Uniformity Minutes W x D x H in.
Amps
VWR SIGNATURE MODEL 1495D VACUUM OVEN
15001-112 1495D 9 Large, 3 Shelves Ambient ±7°C @ 150°C 1.5 hours Int: 71 x 61 x 161, 3840/16
+5°C to 220°C @ 150°C Ext: 92 x 114 x 158
Volts: 240 • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
16 Vacuum Ovens
Model 1410
VWRbrand ™
Vacuum Ovens
Dependable performance, economically priced
Model 1400E
True vacuum valves.
Vacuum valves with seats are located on the top edge of the unit for convenient pump connection. Standard high temperature silicone gaskets ensure a nonleaking seal around the door. Ovens will maintain a vacuum up to 10 microns or better.
Durable design.
Temperature is controlled by a hydraulic thermostat and a feature stainless steel interior. A half-inch thick tempered glass observation window in the oven door permits easy viewing of the chamber interior.
Cross flow ventilation.
The vacuum inlet is located on the top front and the bleed back inlet is in the bottom back.
This configuration forces your inert gas to travel the greatest distance, passing over your samples and purging the chamber.
Unique contact heating.
These vacuum ovens utilize a unique contact heating system. The walls of the chamber are lined with heating elements. As there is no air in the chamber, heat is transferred to the samples via aluminum shelves that are in contact the walls of the chamber.
Convenient access port.
The Model 1430 has a oneinch port that is located on the back of the vacuum oven chamber for easy connection of in-house pump systems and for external access with adapter. (Adapter not included).
Key features:
• True vacuum valves
• Unique cross flow ventilation
• Contact heating
• Wrap around insulation for energy efficiency
• Analog temperature controller
• Stainless steel interior
• Access port (Model 1430)
• Independent overtemperature safety
• CSA approved
• 24 month warranty on parts and labor
Cat. No.
Model ft.
3 Style Range Uniformity Minutes W x D x H in.
Amps
VWRbrand VACUUM OVENS
52201-218 1400E 0.6 Small, 2 Shelves, 120V 40-210°C ± 3.5°C @ 100°C 30 @ 100°C Int: 9 x 12 x 9 550/4.6
52201-219 1400E-2 220V ± 5.0°C @ 200°C Ext: 16 x 16 x 19 800/3.3
52201-504 1410 0.6 Small, 2 Shelves, 120V 40–225°C ± 3.5°C @ 100°C 30 @ 100°C Int: 9 x 12 x 9 550/4.6
52201-505 1410-2 220V ± 5.0°C @ 200°C Ext: 19 x 16 x 16 800/3.3
52201-559 1430 1.7 Medium, 2 Shelves, 120V 40–325°C ± 3.5°C @ 100°C 30 @ 100°C Int: 12 x 20 x 12 1100/9.2
52201-558 1430-2 220V ± 5.0°C @ 200°C Ext: 25 x 25 x 21 1200/5.0
*Exterior dimensions include handle and exhaust port. • Cycle: 50/60Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Safety Vacuum Ovens 17
Model 1410MS
VWR
Signature ™
Safety
Vacuum
Ovens
Designed to meet your safety requirements
VWR Signature safety vacuum ovens incorporate safety features into the microprocessor-based vacuum oven design.
Safety design.
Designed with the safety of your lab in mind, these vacuum ovens have additional safety features such as the non-positive door latch and safety screen. This door latch design releases pressure quickly, eliminating the possibility of an explosion. The .063
gauge steel mesh safety screen over the observation window protects lab occupants in the event the glass should shatter due to an explosion.
Quality features.
These models come standard with a microprocessor temperature controller, stainless steel interior and exterior and a dual door system. They also feature the true vacuum valves, cross flow ventilation and contact heating system.
VWRbrand ™ Safety
Vacuum Ovens
Safety and reliability in a value-priced design
Safety design.
Designed for safe performance, these
VWRbrand vacuum ovens offer features such as the non-positive door latch and safety screen. This door latch design releases pressure quickly, eliminating the possibility of an explosion. The .063
gauge steel mesh safety screen over the observation window protects lab occupants in the event the glass should shatter due to an explosion.
Standard features.
The digital designs come standard with a stainless steel interior and exterior and a dual door system. They also feature the true vacuum valves, cross flow ventilation and contact heating system as well.
Cat. No.
Model ft.
3 Style Range Uniformity Minutes W x D x H in.
Amps
VWR SIGNATURE SAFETY VACUUM OVENS
52201-481 1410MS 0.6 Small, 2 Shelves 40–325°C ± 2.0°C @ 100°C 35 @ 100°C Int: 9 x 12 x 9 1410/8.3
± 3.0°C @ 200°C Ext: 19 x 16 x 16
52201-551 1430MS 1.7 Medium, 2 Shelves 40–260°C ± 2.0°C @ 100°C 35 @ 100°C Int: 12 x 20 x 12 1000/8.3
± 3.0°C @ 200°C Ext: 25 x 25 x 21
52201-656 1450MS 4.5 Large, 2 Shelves 40–260°C ± 2.5°C @ 100°C 70 @ 100°C Int: 18 x 24 x 18 1500/12.5
± 3.5°C @ 200°C Ext: 30 x 28.5 x 24
VWRbrand SAFETY VACUUM OVENS
52201-490 1410S 0.6 Small, 2 Shelves 40–225°C ± 3.5°C @ 100°C 30 @ 100°C Int: 9 x 12 x 9 550/4.6
± 5.0°C @ 200°C Ext: 19 x 16 x 16
52201-479 1430S 1.7 Medium, 2 Shelves 40–325°C ± 3.5°C @ 100°C 30 @ 100°C Int: 12 x 20 x 12 1100/9.2
± 5.0°C @ 200°C Ext: 25 x 25 x 21
*Exterior dimensions include handle and exhaust stack. • Volts: 120 • Cycle: 50/60 Hz • Phase: Single
See page 19 for price information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PRODU
CTS
NAM E
Selecting equipment, supplies and chemicals with the VWR Scientific Products name you know and trust is even easier. We’ve gathered together hundreds of our most popular items from the VWRbrand ™ and VWR Signature ™ product lines in two easy-to-use brochures.
VWR Signatur delivering high quality and superior perfor mance
Check out the new VWRbrand Products brochure for a wide range of items that offer the best value in the industry. When performance requirements are demanding, you’ll want to choose from the small apparatus and lab equipment found in the new
VWR Signature Products brochure.
Make the right choice with VWR Scientific Products.
Request your FREE VWRbrand and Signature
Products brochures today! pro VWRbr viding value at competitive prices
Call 1-800-932-5000 now.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Price List 19
Price List
Cat. No. Model Voltage Price
Ovens
VWR Signature High Performance
Horizontal Air Flow p. 2-3
52201-754 1670 208/230 $4059.50
52202-054 1675 208/230 5151.36
52202-203 1680 208/230 6887.15
52202-258 1685 208/230 7783.04
52202-509 1690 208/230 11,478.58
16000-220 1680-3 208/230 7105.00
16000-222 1685-3 208/230 7965.00
16000-224 1690-3 208/230 11,549.00
VWR Signature Horizontal
Air Flow, p. 4-5
52201-069 1330FM 110 $1853.37
52201-084 1330FM-2 220 1853.37
52201-070 1350FM 110 2183.73
52201-086 1350FM-2 220 2183.73
52201-071 1370FM 110 2698.88
52201-088 1370FM-2 220 2698.88
VWRbrand Forced Air, p. 6
16000-208 1321F 110 $1225.00
16000-210 1321F-2 110 1225.00
16000-212 1325F 110 1450.00
16000-214 1325F-2 110 1450.00
16000-216 1327F 110 1755.00
16000-218 1327F-2 110 1755.00
52201-075 1380FM 220 4143.38
52201-077 1390FM 220 5039.38
VWR Signature Gravity, p. 7
52200-205 1330GM 110 $1455.53
52200-216 1330GM-2 220 1455.53
52200-209 1350GM 110 2082.94
52200-218 1350GM-2 220 2082.94
52200-215 1370GM 110 2138.94
52200-220 1370GM-2 220 2138.94
VWRbrand Gravity, p. 8
52201-297 1310 110 $745.00
52201-298 1310-2 220 745.00
52201-300 1320 110 885.00
52201-301 1320-2 220 885.00
16000-200 1324 110 1160.00
16000-202 1324-2 220 1160.00
16000-204 1326 110 1360.00
16000-206 1326-2 220 1360.00
VWRbrand Utility, p. 9
52200-501 1300U 110 $458.00
52200-502 1300U-2 220 458.00
52200-534 1305U 110 578.00
52200-535 1305U-2 220 578.00
VWR Signature Safety, p. 10
52201-212 1330GMS 110 $1858.97
52201-214 1330FMS 110 2575.69
52201-216 1350FMS 110 2855.65
VWR Signature High Performance
Clean Room, p. 11
52201-710 1602 208/230 $8358.77
52201-721 1601 208/230 4787.41
Cat. No. Model Voltage Price
VWR Signature Depyrogenation, p. 12
13309-458 1365 220 $4665.19
VWR Signature
Asphalt/Corrosive, p. 13
52202-580 1330GZZ 110 $1321.44
52202-582 1350GZZ 110 1847.78
52202-584 1370GZZ 110 2076.24
52202-590 1330FZZ 110 1856.73
52202-592 1350FZZ 110 2316.60
52202-594 1370FZZ 110 3266.64
VWR Signature Vacuum, p. 14
52201-515 1410M 120 $3616.71
52201-516 1410M-2 220 3616.71
52201-548 1430M 120 4402.63
52201-549 1430M-2 220 4402.63
52201-650 1450M 120 8351.93
52201-651 1450M-2 220 8351.93
VWR Signature Model 1495D
Vacuum, p. 15
15001-112 1495D 240 $22,500.00
VWRbrand Vacuum, p. 16
52201-218 1400E 120 $1002.28
52201-219 1400E-2 220 1002.28
52201-504 1410 120 1410.12
52201-505 1410-2 220 1410.12
52201-559 1430 120 3116.58
52201-558 1430-2 220 3116.58
VWR Signature Safety Vacuum, p. 17
52201-481 1410MS 120 $4818.25
52201-551 1430MS 120 5929.41
52201-656 1450MS 120 9695.76
VWRbrand Safety Vacuum, p. 17
52201-490 1410S 120 $2413.92
52201-479 1430S 120 4215.66
Cat. No. For Model Price
Accessories
Floor Stands
52201-730 1601 $1440.00
52201-755 1602, 1670 828.60
Power Exhaust, 110V
52201-344 1330-1370 $390.00
Power Exhaust, 220V
52202-530 1600 Series, $390.00
1380FM,
1390FM
Cat. No. For Model Price
Chart Recorder Bracket
52202-576 _ $44.00
Glass Viewing Doors
52201-153 1330GM/FM $368.00
52201-162 1350GM/FM 412.00
52201-173 1370GM/FM 385.00
52201-774 1601 868.00
52201-785 1602, 1670 494.00
52202-096 1675 647.00
52202-223 1680 605.00
52202-290 1685 811.25
52202-562 1690 853.00
Replacement Thermometer
52201-592 1410, 1430 $40.00
Replacement Filters
52201-741 1601 $1801.80
52202-578 1365 37.50
Silicone Gaskets (Red)
52201-606 1400E, 1410, 1410M $68.00
52201-581 1430, 1430M 82.00
35823-398 1450M 105.00
Hi-Temp Silicone Gasket (Grey)
52201-538 1400E, 1410, 1410M $70.00
35912-020 1430, 1430M 80.00
52201-684 1450M 105.00
Buna-N Gaskets (Black)
52201-628 1400E, 1410, 1410M $82.00
52201-570 1430, 1430M 82.00
52201-672 1450M 77.00
Viton-B Gaskets (Brown)
52201-617 1400E, 1410, 1410M $150.00
52201-639 1430, 1430M 165.00
52201-640 1450M 215.00
Shelves
52201-763 1601 $76.90
52201-722 1602, 1670 82.00
52202-075 1675 82.00
52202-077 1680 82.00
14004-308 1685 82.00
52202-531 1690 82.00
35823-393 1330 Series 46.00
52200-333 1350 Series 46.00
52200-331 1370 Series 46.00
52202-540 1380FM 82.00
52202-540 1390FM 82.00
52200-331 1365 46.00
52200-902
52200-900
1310, 1300U
1321, 1320, 1305U
46.00
46.00
14004-306
14004-304
52201-538
52201-561
52201-662
1324, 1325F
1326, 1327F
1400E, 1410 Series
1430 Series
1450M
46.00
46.00
46.00
46.00
54.00
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Order from Over 400,000 Products...
Sales & Inventory Locations Call Direct for Specialized Service Locations
Pacific
Northwest
Anchorage, AK
Boise, ID
Portland, OR
San Francisco, CA
Seattle, WA
Southwest
Albuquerque, NM
Denver, CO
Phoenix, AZ
San Diego, CA
San Dimas, CA
Midwest
Chicago, IL
Indianapolis, IN
Minneapolis, MN
St. Louis, MO
Gulf States
Dallas, TX
Houston, TX
Lake Charles, LA
Northeast
Boston, MA
Branford, CT
Cleveland, OH
New York, NY
Marlboro, MA
Pittsburgh, PA
Rochester, NY
Mid-Atlantic
Baltimore, MD
Bridgeport, NJ
Columbus, OH
So. Plainfield, NJ
Southeast
Atlanta, GA
Miami, FL
Oak Ridge, TN
Research Triangle
Park, NC
VWR Canlab
Mississauga, Ontario
Ville Mont-Royal,
Québec
Edmonton, Alberta
International
3000 Hadley Rd.
3rd Floor
So. Plainfield, NJ 07080
908-757-4045 fax: 908-757-0313
Puerto Rico
Carr. #869, Km. 1.5 M-4
Royal Industrial Park
Catano, PR 00962
800-932-5000
787-275-4500 fax: 787-788-4320
Switzerland
Ruchligstrasse 20
P.O. Box 964, CH-8953
Dietikon, Switzerland
011-41-1-745-1155 fax: 011-41-1-745-1150
Corporate Accounts
1310 Goshen Pkwy.
West Chester, PA 19380
610-431-1700 fax: 610-431-9174
Production Supplies and Services
975 Overland Ct.
San Dimas, CA 91773
877-VWR-PSCS
(877-897-7727) fax: 888-890-9124
Furniture Division
P.O. Box 3405
Irving,TX 75015
888-624-2432 fax: 972-753-1389
VWR Direct
911 Commerce Ct.
Buffalo Grove, IL 60089
800-444-0880 fax: 847-229-8465
VWR Laboratory
Distributors Services
911 Commerce Ct.
Buffalo Grove, IL 60089
800-873-8971 fax: 847-229-0668
12/00 5M 99-784
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us: (888) 88-SOURCE | [email protected] | www.artisantg.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement