Owner's manual | URC AZ-1 Owner`s manual
Add to my manuals20 Pages
URC AZ-1 is a compact and easy-to-install auxiliary controller that enhances the capabilities of your ccGEN2 smart home system. By adding an external 2.4GHz network antenna to your CP-1 Central Processor, the AZ-1 extends the range and reliability of wireless communication with other URC devices, such as the RM-1 RF remote and future products. This allows you to control your smart home system from anywhere within your home or office, ensuring a seamless and responsive user experience.
advertisement
Owner’s Manual
AZ-1
Auxiliary Controller
AZ-1 A
UXILIARY
C
ONTROLLER
AZ-1 Auxiliary Controller Owner's Manual © 2013 Universal Remote Control,
Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice. ccGEN2 is a registered trademark of Universal Remote Control, Inc.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
AZ-1 A
UXILIARY
C
ONTROLLER
Congratulations!
Features and Benefits
Parts Guide
AZ-1 Panel Descriptions
Specifications
Limited Warranty Statement
End User Agreement
Federal Communication Commission
Interference Statement
Declaration of Conformity
3
4
1
2
6
1
1
7
8
AZ-1 A
UXILIARY
C
ONTROLLER
Congratulations!
Thank you for purchasing the ccGEN2 AZ-1 Auxiliary Controller for use with a CP-1 Central Processor, a RM-1 RF remote control and other URC RF devices. This device allows for optimal placement of the system’s RF antenna, allowing for more robust coverage in all corners of the home or small office space. Designed to work on
URC’s 2.4GHz wireless network, this compact device works with other devices that use the same RF protocol like the RM-1 remote and future products.
Features and Benefits
l Adds a 2.4GHz network antenna to the CP-1 Central Processor
The CP-1 requires the use of the AZ-1 to enable communication, over the 2.4GHz network, to compatible devices (RM-1 and other future products etc.). Using this external antenna allows for optimal placement in the home or office.
l Compact design for easy installation
Easily and discretely install the AZ-1 Auxiliary Controller.
Maintain your home decor while controlling your ccGEN2
Central Processor.
Parts Guide
The AZ-1 Auxiliary Controller includes:
1 - AZ-1 Auxiliary Controller
1 - AC Power Adapter
1 - Wall Mount and 4 Screws
1 - Owner’s Manual
Page 1
AZ-1 A
UXILIARY
C
ONTROLLER
AZ-1 Panel Descriptions
The front, rear and bottom panel consists of:
DC 12V
LAN
POWER
LED
STATUS
LED
DATA
LED
Reset
Power LED: When illuminated this light indicates the AZ-1 is ON.
Status LED: The Status LED signifies when the AZ-1 is connected to the network: l l l
Connected: Illuminates green.
Not Connected: Remains OFF.
Pairing: Illuminates orange.
Data LED: The Data LED flashes as the AZ-1 receives and transmits data.
DC 12V (1A): Plug in the included AC/DC adapter to power up the
AC-1.
LAN: Communicate over the network to an CP-1 using an Ethernet cable.
Reset: Pressing the Reset button, with a stylus or paper clip, refreshes the AZ-1. Unplugging and re-plugging the power cable also resets the unit.
Pressing and holding the Reset button for 15 seconds factory defaults the AZ-1 and places the unit back to its original factory condition.
Page 2
AZ-1 A
UXILIARY
C
ONTROLLER
Specifications
Microprocessor: ARM32-bit Cortex- M3 (120MHz)
Memory: 128+4Kbyte SRAM, 768Kbyte Flash
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 2.405~2.480 GHz
Weight: 3.058 oz
Size: 3.74” X 2.7” X 1.1”
Power: 12V DC 1A
Page 3
AZ-1 A
UXILIARY
C
ONTROLLER
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This
limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery. URC SHALL NOT BE LIABLE
FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR
OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE
OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the URC software complied with all applicable regulations and policies of the Federal
Communications Commissions (“FCC”) regarding electromagnetic interference caused by electronic/computing devices and to the extent that the
URC equipment and/or the URC software fails to so comply, URC shall, at its own expense, take all reasonable measures to promptly cause such to comply.
URC equipment purchases from other than an authorized URC dealer or distributor are without warranty.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE
FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY
PROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE AND
DOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANY
WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC
EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URC
DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE
USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES
ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,
STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE
Page 4
AZ-1 A
UXILIARY
C
ONTROLLER
SKILL AND CARE, OR OUTCOME OR RESULTS.
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER
PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE
FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS,
(III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE
WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY
CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end user in whole or in part, where such are restricted or excluded by applicable law and such shall apply to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment. In the event of a defect, these are the end user’s exclusive remedies.
All the URC equipment returned for service, exchange or repair require an
RGA number. To obtain an RGA number, you must complete a Return
Request Form which you may obtain by calling (914) 835-4484 or contacting
URC at [email protected]. To obtain warranty service, end user must deliver the URC equipment, freight prepaid, in its original packaging or packaging affording adequate protection to URC at 420 Columbus Avenue,
Valhalla, NY 10595. It is end user’s responsibility to backup any macro programming, artwork, software or other materials that may have been programmed into the unit. It is likely that such data, software, or other materials will be lost during service and URC will not be responsible for any such damage or loss. A dated purchase receipt, bill of sale, installation contract or other verifiable proof of purchase is required. For the URC equipment support and other important information, please visit URC's website available at www.universalremote.com or call the Customer Service Center at (914)
835-4484.
This limited warranty only covers the URC equipment issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the URC equipment. This limited warranty does not cover the URC equipment sold as used, as is, refurbished, so called "B stock" or consumables (such as batteries).
This limited warranty is invalid if the factory applied serial number has been altered or removed from the URC equipment. This limited warranty specifically excludes the URC equipment sold by unauthorized resellers.
With the exception of URC’s IR-only, broad-based consumer remotes, none of
URC’s PC programmable remotes or any of our ccGEN2™ whole-house
Page 5
AZ-1 A
UXILIARY
C
ONTROLLER equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our ccGEN2™ whole-house equipment online means buying equipment that does not have a URC’s limited warranty.
Such equipment is not eligible for URC tech support or software support, either.
2. URC’S Limitations of Liability
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,
INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES
OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,
EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO
DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL
BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS
PAID BY END USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF
END USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN
WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR
EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE
BY OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY
TO END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC
LEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement is available at www.universalremote.com/eua.php shall apply.
Page 6
AZ-1 A
UXILIARY
C
ONTROLLER
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.
However, there isno guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one more of the followingmeasures: u Reorient or relocate the receiving antenna.
u Increase the separation between the equipment and receiver.
u Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
u Consult the dealer or an experienced radio/TV technician for help.
Warning!
Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure
Statement
The device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm more from a person’s body.
Other operating configurations should be avoided.
Page 7
AZ-1 A
UXILIARY
C
ONTROLLER
Declaration of Conformity
Company Name
Company Address
Contact Information
Brand Name
Product Name
Model Name
:
:
:
:
:
:
OH SUNG ELECTRONICS CO., LTD.
#181 GONG DAN-DONG, GUMI, GYEONG BUK,
REPUBLIC OF KOREA
Phone: +82-54-468-7281, Fax: +82-54-461-8368
UNIVERSAL remote control
Auxiliary Controller
AZ-1
This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued by the Commission of the European Community
Compliance with these directives implies conformity to the following European Community n EMC Directive l EN 55022 (2010) l EN 55024 (2010) l EN 61000-3-2 (2006) +A1 (2009) + A2 (2009) l EN 61000-3-3 (2008) n R&TTE Directive l EN 60950-1 (2006) + A11 (2009) + A1 (2010) + A12 (2011) l ETSI EN 301-489-1 V1.9.2 (2011), ETSI EN 301 489-17 V2.1.1 (2009) l ETSI EN 300 328 V1.7.1(2006), EN50385 (2002) n Low Voltage Directive l EN 60950-1 (2006) + A11 (2009) + A1 (2010) + A12 (2011)
List of test reports and/or certificate verified compliance with the standards above n EMC Directive l Report No.
l Testing Laboratory n R&TTE Directive
: Gumi College EMC Center l Certificate No.
l Certificate Body : SIEMIC (No. 2200)
Date of issue : March 16, 2012
Name and signature of authorized person : Quality Assurance Team
OH SUNG ELECTRONICS CO., LTD.
Page 8
N
OTE
Page 9
N
OTE
Page 10
N
OTE
Page 11
N
OTE
Page 12
N
OTE
Page 13
N
OTE
Page 14
N
OTE
Page 15
OCE-0132L
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project