Mitsubishi Electric MR-420BL Unit installation

Natural Comfort for Everybody
COMFORT
TAKES ON
NEW MEANING
WITH THE POWER OF
TECHNOLOGY
Our technologically advanced
Mr. Slim Power Inverter systems
improve comfort, operate with
significantly less noise,
.... and provide increased energy savings.
NEW REFRIGERANT
Our air conditioners use R410A,
HFC refrigerant.
01-02
Advanced Power Inverter
Advanced Power Inverter
Silent Control
Mitsubishi Electric’s Power Inverter systems drastically reduce
power consumption
Fan speed during cooling operation is automatically reduced when
the outdoor temperature drops, resulting in quiet, low-noise operation.
Operating noise is reduced by 3dB.
To better meet the needs of shops and offices, our outdoor units are
offered in three-phase power supply models in addition to the existing
line-up of single-phase models. Select the model to best match your
needs from our expanded model range.
Model RP140
(cooling)
“Silent Control”
reduces sound further
Day
Night
50dB
47dB
Outdoor temperature: 35°C
R22 model
Outdoor temperature: 25°C
DAY
56dB
NIGHT
50dB
(during cooling mode)
47dB
(during cooling mode)
R22
(during cooling mode)
R410A
Inverter units (PUHZ-RP)
Non-inverter units
Normal
Low-noise Mode
71 class
52
47
44
100 class
55
49
46
125 class
55
50
47
140 class
56
50
47
*Sound pressure level (dBA)
PUHZ-RP/100/125/140/170/200
Side-flow Outdoor Units
Operating capacities up to 20kW units have been unified to the
side-flow. All operating capacities have been unified to the side-flow
configuration. Even for locations requiring large capacities, the small
footprint of these outdoor units enable them to be used anywhere.
PUHZ-RP71
PUHZ-RP100/125/140/170/200
Longer Maximum Piping Length
PUHZ-RP71
As a result of increasing the volume of refrigerant, piping length has
been increased to a maximum of 75m, expanding the range of layout
possibilities for unit installation.
Outdoor Line-up (PUHZ-RP series)
71
100
Max. piping length
125
140
170
200
Max. height difference
Max. piping length
Single-phase
PUHZ-RP71
30m
50m
Three-phase
PUHZ-RP
100/125/140/170/200
30m
75m
High Energy Efficiency
With the latest inverter technology, energy-saving efficiency has been
improved in cooling operation and heating operation from the previous
model. This contributes to further reductions in operating cost.
71 class
140 class
4.50
4.50
4.00
3.50
19%
4.00
22%
3.50
3.00
UP
UP
3.50
3.35
2.50
UP
3.30
UP
2.50
2.00
2.41
2.00
PEAD-RP
71JAA
PUHZ-RP
71VHA5
PEA-RP
71EA
PUHZ-RP
71VHA2
Cooling EER
PEAD-RP
71JAA
PUHZ-RP
71VHA5
PEAD-RP
140JAA
PUHZ-RP
140V(Y)KA
PEA-RP
71EA
PUHZ-RP
71VHA2
PEA-RP
140EA2
PUHZ-BP
140VHA
Cooling EER
Heating COP
✽ EER and COP are measured at rated condition.
100 class
4.50
PEAD-RP
140JAA
PUHZ-RP
140V(Y)KA
PEA-RP
140EA2
PUHZ-BP
140VHA
Heating COP
✽ EER and COP are measured at rated condition.
170 class
4.50
4.12
4.00
3.61
31%
UP
50%
3.50
4.00
3.50
UP
3.20
3.15
3.00
37%
2.50
2.41
2.00
19%
3.33
UP
3.00
2.50
UP
2.79
2.33
2.00
PEAD-RP
100JAA
PUHZ-RP
100V(Y)KA2
PEA-RP
100EA2
PUHZ-BP
100VHA
Cooling EER
PEAD-RP
100JAA
PUHZ-RP
100V(Y)KA2
PEA-RP
170WJA
PUHZ-RP
170Y(V)KA2
PEA-RP
100EA2
PUHZ-BP
100VHA
PEA-RP
170WGA
PUHZ-BP
170YHA
Cooling EER
Heating COP
✽ EER and COP are measured at rated condition.
125 class
4.50
PEA-RP
170WJA
PUHZ-RP
170Y(V)KA2
PEA-RP
170WGA
PUHZ-BP
170YHA
Heating COP
✽ EER and COP are measured at rated condition.
200 class
4.50
4.00
4.00
3.50
38%
3.32
3.00
2.86
20%
3.96
4.00
30%
UP
3.33
4%
3.50
38%
UP
3.00
4.00
3.07
3.19
23%
3.25
UP
3.00
UP
3.12
2.60
2.50
2.50
2.41
2.00
2.00
PEAD-RP
125JAA
PUHZ-RP
125V(Y)KA2
PEA-RP
125EA
PUHZ-BP
125VHA
Cooling EER
PEAD-RP
125JAA
PUHZ-RP
125V(Y)KA2
PEA-RP
125EA
PUHZ-BP
125VHA
Heating COP
✽ EER and COP are measured at rated condition.
PEA-RP
200WJA
PUHZ-RP
200YKA2
PEA-RP
200WGA
PUHZ-BP
200YHA
Cooling EER
PEA-RP
200WJA
PUHZ-RP
200YKA2
PEA-RP
200WGA
PUHZ-BP
200YHA
Heating COP
✽ EER and COP are measured at rated condition.
03-04
Advanced Power Inverter
High Power
More Power for Faster Cooling/Heating
Comparison of EER (cooling mode)
Comparison of EER between non-inverter and Power Inverter
(4-way ceiling cassette) models.
Powerful Cooling/Heating Performance
The maximum operating cooling/heating capacity of the Mr. Slim
Power Inverter units have been improved (compared to conventional non-inverter models) when operating in either low or high
outdoor temperatures.
Average
EER
4.00
4.0
Cooling capacity (kW)
53%
increase
R22
Non-inverter
80%
UP
3.40
3.5
57%
UP
3.29
3.27
41%
32%
2.22
71 class
Power Inverter Model
100 class
2.33
125 class
7.7
8.1
105%
100 class
9.7
11.4
118%
125 class
12.4
14.0
113%
140 class
14.0
15.3
109%
Heating capacity (kW)
R22
Non-inverter
2.47
2.17
Outdoor Unit
71 class
UP
UP
3.0
4-way ceiling cassette
R410A
Power inverter max. (PUHZ-RP)
140 class
4-way ceiling cassette
R410A
Power inverter max. (PUHZ-RP)
71 class
8.4
10.2
121%
100 class
10.4
14.0
135%
125 class
14.0
16.0
114%
140 class
16.1
18.0
112%
Non-inverter Model
✽ EER are measured at rated condition.
Wider Performance Range
Operation is now possible at lower speeds, thus cutting energy losses
produced by the repeated On/Off operation of non-inverter models.
Comfort is improved while power consumption is reduced.
Cooling capacity ranges
4-way ceiling cassette
71 class 3.3-8.1 kW
100 class 4.9-11.4 kW
125 class 5.5-14.0 kW
140 class 6.2-15.3 kW
0
2
4
6
8
10
12
Heating capacity ranges
14
16
18kW
4-way ceiling cassette
71 class 3.5-10.2 kW
100 class 4.5-14.0 kW
125 class 5.0-16.0 kW
140 class 5.7-18.0 kW
0
2
4
6
8
10
12
14
16
18kW
Advanced Energy-saving Technologies
Highly efficient fan and grille for outdoor unit
Highly efficient heat exchanger
The shapes of the fan and grille of the outdoor unit were redesigned,
realising an increase in blowing capacity and more efficient heat
exchange while maintaining the same operating noise level.
A high density and increase in surface area have improved the
heat-exchange efficiency of the heat exchanger.
Outdoor unit fan opening increased <PUHZ–RP100–200>
High-density heat exchanger <PUHZ–RP100–200>
The diameter of the opening for the fan in the outdoor unit
has been increased from 490 to 550mm. Blowing capacity
has been increased while maintaining the same fan rotation
speed.
The pipe diameter has been changed
from 9.52 to 7.94mm, resulting in a
high-density heat exchanger.
2 lines, 52 columns
2 lines, 64 columns (RP100 –200)
Opening increased
from 490 to 550mm
in diameter
Heat-exchange surface area increased
<PUHZ–RP100–200>
Heat exchanger size extended horizontally, increasing the
surface area.
Increase in heat-exchanger surface area
(image)
Grille shape changed <PUHZ–RP71–200>
The shape of the air outlet grille has been changed to
reduce pressure loss. This has helped improve heat
exchange performance.
Heat exchanger
Heat exchanger
< PUHZ–RP • HA >
< PUHZ–RP • KA >
Heat Interchanger (HIC) Added <RP140>
An HIC circuit has been added to improve energy efficiency during
cooling operation. Liquid refrigerant is rerouted, transformed into a
gas state and injected back into the system to increase overall
pressure of the refrigerant being sent to the compressor, thereby
reducing the load on the compressor and raising efficiency.
< PUHZ–RP • HA >
< PUHZ–RP • KA >
Cooling operation
Inflexed fan <PUHZ–RP100–200>
Indoor
HEX
Adoption of a fan with improved ventilation characteristics
and a newly designed rear edge that suppresses wind
turbulence raises fan operation efficiency.
A
A
w/ HIC circuit
w/o HIC circuit
Fan rear edge
Heat
interchanger
(HIC)
Outdoor
HEX
Power
receiver
LEV B
Heat Interchanger (HIC)
Compressor
LEV A
LEV C
Increasing the pressure of the
refrigerant sent to the compressor
reduces the compression load
Advanced Power Inverter
05-06
Advanced Technology for High Efficiency
Numerous Leading-edge Technologies
Assure High Efficiency
Reluctance DC Rotary Compressor (PUHZ-RP71)
DC Fan Motor (PUHZ-RP71/100/125/140/170/200)
The reluctance DC motor has a rotor equipped with powerful
neodymium magnets. The magnetic torque produced by the neodymium
magnets and reluctance torque results in more efficient operation.
A highly efficient DC motor has been installed to drive the fan
of outdoor units, realising up to 60% higher efficiency when
compared to an equivalent AC motor.
Vector-Wave Eco Inverter
DC compressor motor (rotor)
This inverter monitors the varying compressor motor frequency and
creates the most efficient waveform for the motor speed. As a result,
operating efficiency in all speed ranges is improved, less power is
used and annual electricity costs are reduced.
Smooth AC wave pattern
Neodymium magnets
Magnetic torque
+
The inverter has been made more compact by inserting the
circuitry inside a synthetic resin molding.
To ensure quiet operation, soft PWM control is used to
prevent the metallic whine associated with conventional
inverters.
Reluctance torque
Sine-wave drive soft PWM
Highly Efficient Scroll Compressor
(PUHZ-RP100/125/140/170/200)
Higher efficiency has been achieved by adding
a frame compliance mechanism to the DC scroll
compressor. The mechanism allows movement
in the axial direction of the frame supporting the
cradle scroll, thereby greatly reducing the
leakage and friction loss, and ensuring
extremely high efficiency at all speeds.
Power Receiver and Twin LEV Control
(PUHZ-RP71/100/125/140/170/200)
Fixed scroll
Leaking loss: minimum
Thrust gas power: minimum
Thrust friction loss: minimum
Secondary back-pressure
chamber minimises
thrust friction loss.
Frame Cradle scroll
Primary back-pressure
chamber minimises
leaking loss.
Mitsubishi Electric has developed a power receiver and twin linear
expansion valves (LEVs) that optimise the performance of the
compressor. By ensuring optimum control in response to the operating
waveform and outdoor temperature, this technology is tailored to the
characteristics of the new refrigerant to enhance operating efficiency.
Full Dot Liquid-crystal Display Adopted
Easier to read thanks to use of a full dot liquid-crystal display with
backlight, and easier to use owing to adopting a menu format that has
reduced the number of operating buttons.
Easy To Read & Easy To Use
Multi-language Display
Display Example [Operation Mode]
Control panel operation in eight
different languages
MultiIanguage
Full Dot LCD
Choose the desired language,
among the following languages.
PAR-30MAA
[English]
[Spanish]
[Italian]
[German]
[Russian]
[Portuguese]
[Swedish]
[French]
Energy-efficient Control
Operation Control Functions
Energysaving
Schedule
Precise control of power
consumption <PUHZ–RP71–200>
The amount of power consumed in each time period is managed so
that the demand value is not exceeded. The demand control
function can be set to start and finish in 5-minute units.
Additionally, the level can be adjusted to 0, 50, 60, 70, 80 or 90%
of maximum capacity, and up to 4 patterns can be set per day.
Air-conditioning operation is automatically controlled to ensure that
electricity in excess of the contracted volume is not consumed.
Using a temperature that is 1°C lower/higher for heating/cooling
results in a 10% reduction in power consumption.* Temperature
Range Restriction limits the maximum and minimum temperature
settings, contributing to the prevention of overheating/overcooling.
*In-house calculations
Cooling/Dry
(Setting example of minimum temp. in 25°C)
Finish time
12:00
13:00
17:00
21:00
Adjusted capacity level
80%
50%
90%
50%
Prevents wasteful operation by
automatically returning to the
preset temperature after specified
operating time
After adjusting the temperature for initial heating in winter or
cooling on a hot summer day, it is easy to forget to return the
temperature setting to its original value. The Auto-return function
automatically resets the temperature back to the original setting
after a specified period of time, thereby preventing
overheating/overcooling. The Auto-return activation time can be set
in 10-minute units, in a range between 30 and 120 minutes.
30(˚C)
Possible temperature range setting
25(˚C)
30(˚C)
Lower temperature limit
To prevent excessive cooling
Lower temperatures cannot
be selected
Recommended for
Auto-return
Temperature Range Restriction
prevents overheating/overcooling
19(˚C)
■ Setting pattern example
Start time
8:15
12:00
13:00
17:00
Temperature
Range
Restriction
Auto-off
Timer
Office
Restaurant
Turns heating/cooling off
automatically after preset time
elapses
When using Auto-off Timer, even if one forgets to turn off the unit,
operation stops automatically after the preset time elapses,
thereby preventing wasteful operation. Auto-off Timer can be set in
10-minute units, in a range between 30 minutes and 4 hours.
Eliminates all anxiety about forgetting to turn off the unit.
Recommended for
Meeting room
Changing room
*Auto-return cannot be used when Temperature Range Restriction is in use.
Night
Setback
Keep desired room temperatures
automatically
This function monitors the room temperature and automatically
activates the heating mode when the temperature drops below the
preset minimal temperature setting. It has the same function for
cooling, automatically activating the cooling mode when the
temperature rises above the preset maximum temperature setting.
Operation
Lock
Fixed temperature setting promotes
energy savings
In addition to operation start/stop, the operation mode, temperature
setting and airflow direction can be locked. Unwanted adjustment
of temperature settings is prevented and an appropriate temperature is constantly maintained, leading to energy savings. This
feature is also useful in preventing erroneous operation or tampering.
Recommended for
Office
Hospital
School
Public hall
Computer server facility
07-08
Control Technologies
Setting Example (restaurant in summer time)
Weekly
Timer
Set up to 8 patterns per day including
temperature control
*Weekly Timer cannot be used when On/Off Timer is in use.
Temperature setting (°C)
The Weekly Timer enables the setting of operation start and finish
times and adjusting the temperature as standard features. Up to 8
patterns per day can be set, providing operation that matches the
varying conditions of each period, such as the number of
customers in the store.
Preparation
26
1
Busy
hours
Set to lower temperature
Off-peak Set to higher temperature
hours
7
25
Opening
time
2
24
4
5
3
Dinner time
8-pattern setting
22
0
Closing time
6
Lunch time
23
8
10
12
14
16
18
20
22
Necessary to change temperature settings for cooling/heating times.
*Joint research conducted with Japan Facility Solutions, Inc.
24 (Time)
Installation/Maintenance Support Functions
Manual
Vane Angle
Setting
Outdoor unit data accessed
immediately, enabling fast
maintenance <PUHZ–RP71–200>
Smooth
Maintenance
(4-way ceiling
cassette)
Using the Stable Operation Control (fixed frequency) of the Smooth
Maintenance function, the operating status of the inverter can be
checked easily via the screen on the remote controller.
Direction of vertical airflow for
each vane can be set
Setting the vertical airflow direction for each individual vane can be
performed simply via illustrated display. Seasonal settings such as
switching between cooling and heating are easily changed as well.
■ Smooth Maintenance Function Operating Procedure
Autodescending
Panel
Operation
(4-way ceiling
cassette)
Activate Stable
Operation
Select the
maintenance mode
Data is displayed
Display information (11 items)
Compressor
6
Easily raise/lower panels using
the remote controller
Auto-descending panel operation is available as an option. Panels
can be lowered/raised using a button on the wired remote
controller. Filter cleaning can be performed easily.
OU TH4 temp. (°C)
1
COMP. current (A)
7
OU TH6 temp. (°C)
2
COMP. run time (Hr)
8
OU TH7 temp. (°C)
3
COMP. ON/OFF (times)
4
COMP. frequency (Hz)
9
IU air temp. (°C)
Outdoor Unit
10
IU HEX temp. (°C)
5
Sub cool (°C)
11
IU filter operating time* (Hr)
Indoor Unit
*IU filter operating time is the time elapsed since filter was reset.
Inspection Guidelines
The computed temperature difference is plotted as in the graph below and
operating status is determined.
Operation
Cooling
Temp. difference
Heating
Cooling
operation
Item
( 6 OU TH4 temp.) – ( 7 OU TH6 temp.)
( 9 IU air temp.) – ( 10 IU HEX temp.)
( 6 OU TH4 temp.) – ( 10 IU HEX temp.)
( 10 IU HEX temp.) – ( 9 IU air temp.)
(°C)
45
40
Heating
operation
Inspection C
35
30
9
10
25
20
15
0
35
Inspection C
Filter inspection
30
Filter inspection
Normal
10
25
20
Inspection B
Normal
10
Inspection A
5
0
10 20 30 40 50 60 70 80
(°C)
6
9
15
Inspection B
10
5
(°C)
45
40
7
Inspection A
10 20 30 40 50 60 70 80
(°C)
6
10
Result
Normal
Normal operating status.
blocked.✽1
Filter inspection
Filter may be
Inspection A
Capacity is reduced. Detailed inspection is necessary.
Inspection B
Refrigerant level is low.
Inspection C
Filter or indoor unit heat exchanger is blocked.
✽1: Due to indoor and outdoor temperatures, “Filter inspection” may be displayed even if the filter is not blocked.
● The above graphs are based on trial data. Results may vary depending on installation/temperature conditions.
● Stable operation may not be possible under the following temperature conditions:
a) In cooling mode when the outdoor induction temperature is over 40°C or the indoor induction
temperature is below 23°C.
b) In heating mode when the outdoor induction temperature is over 20°C or when the indoor induction
temperature is over 25°C.
● If the above temperature conditions do not apply and stable operation is not achieved after 30 minutes has
passed, please inspect the units.
● The operating status may change due to frost on the outdoor heat exchanger.
Reassuring Troubleshooting
Navigation Function
Contact Details Displayed When Abnormality Occurs
Easily contact a service company when there is a problem.
The telephone number of a service company and other information can be input and stored in advance. When a problem occurs,
the contact details are displayed automatically, and a call for help
can be made without delay.
Dot Liquid-crystal Display Adopted
The adoption of dot liquid-crystal display (LCD) technology and a
large display screen for the control panel optimises visibility.
Operation and control status are easily read at a glance.
Easy to Read/Easy to Use
Display Example [Operation Mode]
Multi-language Display
Dot LCD
PAR-21MAA
Control panel operation in eight
different languages
MultiIanguage
Choose the desired language, among the
following languages.
[English]
[Spanish]
[Italian]
[German]
[French]
[Russian]
[Chinese]
[Japanese]
Energy-efficient Control
Operation Control Functions
Temperature
Range
Restriction
Cooling/Dry
Air conditioner operation restricted
to within a specified operating range
(Setting example of minimum temp. in 25°C)
19(˚C)
30(˚C)
Possible temperature range setting
25(˚C)
30(˚C)
Lower temperature limit
Set the upper and lower limits for the temperature range during
operation. Excessive heating or cooling is prevented, leading to
increased energy savings.
Auto-off
Timer
Automatically turns off
air conditioner
Lower temperatures cannot
be selected
To prevent excessive cooling
Recommended for
Restaurant
Office
The “Simple Timer”— starts/stops in units of 1 hour in a 72-hour
period — is set at the time of shipment from the factory. It can be
changed to the “Auto-off Timer” function using the remote controller.
Recommended for
Meeting room
Changing room
Set the time for the air conditioner to turn off automatically. The
timer can be set in the range from 30 minutes up to 4 hours in
30-minute intervals.
Operation
Lock
Prevent operation settings
from being changed
Only the administrator can change settings when using the
Operation Lock mode.
Recommended for
Office
Hospital
Units can be set so that the operation mode cannot be changed.
When “Operation Lock” is activated, new temperature setting
commands are not accepted, thereby ensuring that the unit runs
in the specified (locked in) temperature range. This promotes
energy savings and prevents erroneous/ mischievous operation.
School
Public hall
Computer server facility
09-10
Control Technologies
Introduced in response to
market demand
Weekly
Timer
Setting Example (restaurant in summer time)
Control temperature on a weekly basis
Temperature settings and On/Off control can be managed over
a period of one week using the Weekly Timer. Up to eight setting
patterns per calendar day are possible.
Temperature setting (°C)
26
Busy
hours
Off-peak
hours
Set to lower temperature
Set to higher temperature
25
6
Opening time
24
3
1
2
23
7
Closing time
5
Lunch time
4
Dinner time
7-pattern setting
22
0
10
12
14
16
18
20
22
24 (Time)
(Results of cooperative study with Japan Facility Solutions, Inc.)
Rotation, Back-up and 2nd Stage Cut-in Functions (PAR-30MAA and PAR-21MAA)
(1) Rotation and Back-up Functions
Function Outline
• Main and sub units take turns operating according to
a rotation interval setting.
• If one unit malfunctions, the other unit automatically
begins operation (Back-up function)
Operation Pattern
[Back-up function only]
System Image
Main
unit
O/U-1
O/U-2
I/U-1
I/U-2
Sub
unit
Error occurs on main unit.
Main Sub
Start operation
Main
unit
I/U-1
Run
Abnormal condition
Sub
unit
I/U-2
Stop
Run
[Rotation function] & [Back-up function]
Start operation
O/U : Outdoor unit
I/U : Indoor unit
R/C : Wired remote controller
R/C
(2) 2nd Stage Cut-in Function
Function Outline
• Number of units operating is based on room
temperature and predetermined settings.
• When room temperature rises above the desired
setting, the standby unit starts (2-unit operation).
• When the room temperature falls 4°C below the predetermined setting, the standby unit stops (1-unit
operation).
System Constraint
• This function is only available for rotation operation
and when the back-up function is in cooling mode.
Main
Sub
Sub
Main
Main
unit
I/U-1
Run
Stop
Run
Sub
unit
I/U-2
Stop
Run
Stop
1–28 days
Error occurs on main unit.
Main Sub
Abnormal condition
Run
1–28 days
(Ex: When the request code is “313”, each unit operates alternately in daily cycle.)
Operation Pattern ( When cooling)
[2nd stage cut-in function]
Start operation
Main
unit
I/U-1
Run
Sub
unit
I/U-2
Stop
Room temp. >
= Set point
Sub unit starts operation
Run
Room temp. >
= Set point –4°C
Sub unit stops
Stop
Easy Maintenance Function (Mr. Slim Power Inverter only)
• Nearly maintenance-free operation
• Monitor operation data of the indoor and outdoor
units via the remote controller.
Remote controller also lets you set the operating
frequency, allowing easier inspection.
Easy Maintenance Information
Compressor
Outdoor Unit
Indoor Unit
4
Heat exchanger
temperature (˚C)
7
Intake-air
temperature (˚C)
Number of ON/OFF
times (×100 times)
5
Discharge
temperature (˚C)
8
Heat exchanger
temperature (˚C)
Operating current (A)
6
Outdoor-air
temperature (˚C)
9
Filter operating
time* (hr)
1
Accumulated
operating time (×10hr)
2
3
*The filter operating time is the time elapsed since the filter button was reset.
Refrigerant Leakage Check (Mr. Slim Power Inverter only)
The Mr. Slim Power Inverter units come equipped
with a useful new “Refrigerant Leakage Check”
function. Using a wired remote controller, it is easy
to check if refrigerant has been lost over a long
period of use. This reduces service time and gives
an added sense of safety.
Product Line-up
4-way ceiling cassette
2.5kW
SLZ
Compact cassette
3.5kW
SLZ-KA25VAQ (L)
5.0kW
SLZ-KA50VAQ (L)
PLA
Wide Power cassette
Compact bulkhead
Ceiling-concealed
Ceiling-suspended
SEZ
6.0kW
PLA-RP60BA
SEZ-KD25VAQ (L)
SEZ-KD35VAQ (L)
PEAD
PEA
PCA
SEZ-KD50VAQ (L)
SEZ-KD60VAQ (L)
PCA-RP50KAQ
PCA-RP60KAQ
SUZ-KA50VA3
SUZ-KA60VA3
Wall-mounted
PKA
Outdoor unit
SUZ-KA25VA3
*SEZ/SLZ indoor units should be connected to an SUZ outdoor unit.
*PKA-RP71: only for PUHZ-RP outdoor connection.
*PEA-RP: No wireless remote controller as optional parts.
SUZ-KA35VA2
Product Line-up of
7.1kW
10.0kW
12.5kW
Inverter Units
14.0kW
17.0kW
20.0kW
11-12
Remote
controller
See
page
optional for SLZ-VAQ
19
optional for SLZ-VAQ
standard for SLZ-VAL
optional
13
optional
PLA-RP71BA
PLA-RP100BA
PLA-RP125BA
14
PLA-RP140BA
optional
optional for SEZ-VAQ
19
optional for SEZ-VAQ
SEZ-KD71VAQ (L)
standard for SEZ-VAL
NEW
NEW
NEW
NEW
NEW
NEW
optional for PEAD and PEA
15
PEAD-RP140JAA
NEW
optional for PEAD and PEA
PEAD-RP71JAA
PEAD-RP100JAA
PEAD-RP125JAA
PEA-RP170WJA
16
PEA-RP200WJA
PEA-RP140WJA
optional for PEAD
optional
17
optional
PCA-RP71KAQ
PCA-RP100KAQ
PCA-RP125KAQ
PCA-RP140KAQ
optional
Combination only
with PUHZ-RP71
optional
18
PKA-RP71KAL
optional
PKA-RP100KAL
standard
SUZ-KA71VA3
PUHZ-RP100V/YKA2
PUHZ-RP71VHA5
PUHZ-RP125V/YKA2
PUHZ-RP140V/YKA2
PUHZ-RP170V/YKA2
PUHZ-RP200YKA2
13
4-way Ceiling Cassette
PLA
SERIES
Advancements in PLA series improve
style and performance for ensured
indoor comfort
Conventional model
Wide Airflow
Wide-angle outlets distribute airflow to all
corners of the room, ensuring the room is
sufficiently cooled/heated. Horizontal airflow
and a fan speed reduced by 20% compared to
conventional models also contribute to
increased comfort for occupants.
PLA-RP ✽ ✽ BA
Less Cold Draught
The horizontal airflow function prevents
cold draughts from striking the body
directly, thereby keeping the body from
becoming over-chilled.
Horizontal airflow
prevents draughty feeling
Independent Vane Direction
Setting
(i-see Sensor: optional)
Using wired remote controller,
set airflow direction for each vane
(manual setting also possible)
✽ Wired remote controller
(PAR-21MAA/PAR-30MAA) has
Independent Vane Direction Setting.
This function is only available
when indoor unit connects
with PUHZ series.
Use the wired remote controller to set
the airflow pattern of each vane
independently. Easily adjust airflow to
the interior layout and seasonal
conditions, and ensure an even
temperature distribution all the time.
Horizontal
flow
Fixed
PLA-RP60/71
100/125/140BA
Set by remote Vertical
flow
controller
Settings can be changed anytime
using a wired remote controller.
Wave Airflow Mode for Heating
optional
The airflow direction at
each outlet changes
intermittently, providing
a consistent temperature
through-out the room.
● “Wave Airflow” operation image
Vertical
Vertical Vertical Vertical
flow
flow
flow
flow
Simultaneous horizontal and vertical operation ensure
a comfortable room from corner to corner.
● Wave control effect thermograph
Vertical flow
Swing mode
Temperature gap with uneven
temperature distribution
Temperature gap is decreased,
and room is warmed uniformly
Specifications: 4-way ceiling-cassette (PLA)
Indoor unit
PLA-RP60BA
PLA-RP71BA
Outdoor unit
SUZ-KA60VA3
SUZ-KA71VA3
Function
Capacity (min.-max.)
(kW)
Input
(kW)
Cooling
Heating
Cooling
Heating
6.1 (1.1-6.3)
6.9 (0.9-8.0)
7.1 (0.9-8.1)
8.0 (0.9-10.2)
1.78
1.97
2.07
2.19
Rated EER/COP
3.43
3.50
3.43
3.65
Rated AEER/ACOP
3.36
3.44
3.38
3.60
AEER/ACOP (part-load %) ✽
PLA-RP60BA
Indoor unit
PLA-RP71BA
Power supply
Airflow (Lo-Mi2-Mid-Hi)
Sound pressure level
Dimensions
CMM
12-14-16-18
14-16-18-21
L/S
200-233-267-300
233-267-300-350
(dB)
28-29-31-32
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
✽ MEPS compliant at part load
(kg)
28-30-32-34
Unit: 258, Panel: 35
Unit: 23, Panel: 6
14
4-way Ceiling Cassette
Auto Fan Speed Mode
The fan speed is adjusted automatically, thereby maintaining a
comfortable room environment at all times. At the start of operation, a
high fan speed realises quick heating/cooling of the room. Once the
desired temperature is reached, the fan speed is reduced for stable
heating/cooling and greater comfort.
Mi1
Mi2
Hi
360°
i-see Sensor works to
ensure even temperature
distribution and save
energy (requires optional
corner panel)
Fan speed setting by remote controller (four levels)
Lo
4-way cassettes can be equipped with the i-see Sensor,
a radiation-based sensor that monitors floor-level
temperatures throughout the room to
ensure room comfort.
Auto
✽Special setting is required for wireless remote controller.
Floor-level temperature
measured throughout the room.
Quiet Operation
An improved airflow path and powerful highcapacity flow fan contribute to the realisation of
quieter operation.
Power flow fan
i-see Sensor improves energy efficiency and enhances room comfort
The i-see Sensor is an innovative Mitsubishi Electric technology that uses a
radiation-based sensor to monitor temperature throughout the entire room.
When connected to the air conditioner control panel, i-see Sensor works to
maximise room comfort through 360° sensing that covers the whole floor space.
“Pure White” Colour
Stylish, pure white-coloured panels and wired remote controller
express a clean, streamlined image that is a suitable match for any
interior.
■ i-see Sensor Operation
The i-see Sensor rotates 90° and takes 5-second
measurements to accurately determine floor-level
temperatures on all sides of the room.
Other Features
90°
rotation
• Stylish indoor-unit vane covers (when unit is turned off)
• Maximum upward draining of 850mm
• Wireless remote controller available
• Duct flange for Fresh-air Intake
• Branch duct
Automatic
elevation to
four metres
Automatic Grille Lowering
Function (Option)
1.2m
1.6m
Easy to use/Simple maintenance
An automatic grille lowering function capable
of stopping at eight different heights is
available to simplify filter maintenance.
5sec
measurement
90°
rotation
5sec
measurement
5sec
measurement
● The i-see Sensor calculates the temperature by measuring the infrared rays emanating
from the walls and floors, and measuring the floor-level temperature.
● The sensor rotates 360-degrees once every two minutes when there is significant
temperature disparity and once every five minutes when a stable, even temperature has
been reached.
“I Feel” Temperature Control
The sensory temperature is calculated by measuring the air-intake temperature
and the floor temperature. This technology makes it possible to avoid
overcooling or overheating.
2.4m
Elevating (up-down)
controller
Without i-see Sensor
Only intake-air temperature at the
ceiling is measured, resulting in
uneven temperature distribution.
3.2m
Wired remote controller
(PAR-21MAA/PAR-30MAA) has
automatic grille lowering function.
This function is only available
when indoor unit connects with
PUHZ series.
3.6m
With i-see Sensor
Both floor-level and intake-air temperatures are measured, providing operation that creates a comfortable
room environment from ceiling to floor.
Indoor temperature
Indoor temperature
detecting
sensor
detecting sensor
Indoor temperature
Indoor temperature
detecting
sensor
detecting sensor
4.0m
360°
sensing
Area which the
sensor checks
PLA-RP71BA
PUHZ-RP71VHA5
Cooling
7.1 (3.3-8.1)
Heating
PLA-RP100BA
PUHZ-RP100V/YKA2
Cooling
Heating
PLA-RP125BA
PUHZ-RP125V/YKA2
Cooling
Heating
2.95
3.80
3.71
PUHZ-RP140V/YKA2
Cooling
Heating
2.09
2.17
3.40
3.69
4.00
3.80
3.29
3.77
3.27
3.61
3.22
3.49
3.67/3.63
3.54/3.50
3.10/3.08
3.56/3.54
3.10/3.08
3.44/3.42
4.13/4.05
PLA-RP71BA
PLA-RP100BA
3.97
11.5m
4.43
3.95/3.89
PLA-RP125BA
PLA-RP140BA
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
14-16-18-21
20-23-26-30
22-25-28-31
24-26-29-32
233-267-300-350
334-384-434-501
367-417-467-517
400-434-484-534
28-30-32-34
32-34-37-40
34-36-39-41
36-39-42-44
Unit: 298, Panel: 35
Unit: 840, Panel: 950
Unit: 840, Panel: 950
Unit: 25, Panel: 6
Area
Areawhich
whichthe
the
“i-see
i-see Sensor”
Sensor
checks
checks
2.7m
PLA-RP140BA
8.0 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 12.5 (5.5-14.0) 14.0 (5.0-16.0) 13.0 (6.2-15.3) 16.0 (5.7-18.0)
2.50
5sec
measurement
2.0m
2.8m
Packaged elevating (up-down)
controller in the grille (PLP-6BAJ)
can be used when outdoor unit is
both PUHZ series and SUZ series.
90°
rotation
Unit: 27, Panel: 6
Heating
Heating
Set temperature: 23°C
without i-see Sensor
Set temperature: 20°C
with i-see Sensor + Auto Fan Speed
37°C
37°C
25°C
25°C
13°C
13°C
15
Ceiling-concealed
PEAD
SERIES
The thin, ceiling-concealed indoor units
of the PEAD series are the perfect answer
for the air conditioning requirements of
buildings with minimum ceiling installation
space and wide-ranging external static
pressure. Energy-saving efficiency has
been improved, thereby reducing electricity
consumption and contributing to a further
reduction in operating cost.
Compact Indoor Units
The height of the PEAD (7.1kW-14.0kW) models has been unified
to 250mm. Compared to the previous PEA-RP models, the height
has been reduced by as much as 178mm, making installation
possible in low ceilings with minimal clearance space.
Height
reduced by
250mm
PEA-RP71-140EAQ
178mm
PEAD-RP71-140
Lighter Weight
Compared to the previous PEA-RP • EAQ (7.1kW-14.0kW) models,
unit weight has been reduced by an average of 27kg. This significant weight reduction has led to increased ease of installation.
NEW
Wide Selection of Fan Speeds and External
Static Pressure
Five-stage external static pressure conversions and three fan
speed selections are available. Capable of being set to a maximum
of 125Pa, units are applicable to a wide range of building types.
High Energy-Saving Efficiency
PEAD-RP71/100/125/140JAA
Compared to the previous PEA-RP • EAQ (7.1kW-14.0kW) models,
PEAD-RP models achieve enhanced energy savings through
adopting a highly efficient DC fan motor. This contributes to an
impressive reduction in electricity costs.
optional
Capacity
Rated EER/COP
PEA-RP
PEAD-RP
Rated EER
2.86
3.50
22% UP
Rated COP
3.35
4.00
19% UP
Rated EER
3.28
3.61
10% UP
Rated COP
3.54
4.12
16% UP
Rated EER
2.95
3.33
13% UP
Rated COP
3.64
4.00
10% UP
Rated EER
2.90
3.32
14% UP
Rated COP
3.74
3.96
6% UP
7.1kW
10.0kW
12.5kW
14.0kW
Specifications: Ceiling-concealed (PEAD)
Indoor unit
Outdoor unit
Function
Capacity (min.-max.)
(kW)
Input
(kW)
PEAD-RP71JAA
PEAD-RP71JAA
PEAD-RP100JAA
PEAD-RP125JAA
PEAD-RP140JAA
SUZ-KA71VA3
PUHZ-RP71VHA5
PUHZ-RP100V/YKA2
PUHZ-RP125V/YKA2
PUHZ-RP140V/YKA2
Cooling
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
7.1 (0.9-8.1)
8.0 (0.9-10.2)
7.1 (3.3-8.1)
8.0 (3.5-10.2)
10.0 (4.9-11.4)
11.2 (4.5-14.0)
12.0 (5.5-14.0)
14.0 (5.0-16.0)
13.0 (6.2-15.3)
16.0 (5.7-18.0)
2.10
2.04
2.03
2.00
2.77
2.72
3.60
3.50
3.91
4.04
Rated EER/COP
3.38
3.92
3.50
4.00
3.61
4.12
3.33
4.00
3.32
3.96
Rated AEER/ACOP
3.33
3.86
3.31
3.78
3.34/3.31
3.81/3.78
3.14/3.11
3.76/3.74
3.09/3.07
3.76/3.73
AEER/ACOP (part-load %) ✽
3.68/3.63
PEAD-RP71JAA
Indoor unit
PEAD-RP71JAA
PEAD-RP100JAA
PEAD-RP125JAA
PEAD-RP140JAA
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
Power supply
CMM
17.5-21-25
24-29-34
29.5-35.5-42
32-39-46
L/S
292-350-417
400-483-567
492-592-700
533-650-767
Sound pressure level
(dB)
30-34-39
33-38-42
36-40-44
40-44-49
Return air spigot size
(mm)
1,058×210
1,358×210
1,358×210
1,558×210
(mm)
1,060×178
1,360×178
1,360×178
1,560×178
Airflow
35/50/70/100/125
External static pressure Pa
Supply air spigot size
Dimensions
Weight
Height
(mm)
Width
(mm)
Depth
(mm)
(kg)
250
1,400
1,100
1,600
732
29
38
39
43
✽ MEPS compliant at part load
16
Ceiling-concealed
PEA
SERIES
For elegance and style, the PEA series
complements the room environment with
aesthetically pleasing ceiling installation
and a vast line-up of performance
functions.
Freedom in Installation
Versatile and easy installation is possible; for example, it is
possible to adjust the distance between the air-intake and
air-outlet vents to create the optimal airflow configuration.
■ Long rectangular room
■ Room with fixed ceiling
fixtures
■ L-shaped room
Flexible Duct Design Enables Use
of High-pressure Static Fan
A flexible duct design and 150Pa external static high-pressure are
incorporated. The increased variation in airflow options ensures
operation that best
matches virtually all
room layouts.
NEW
Easier Handling
PEA-RP140/170/200WJA
The new ducted fan coil unit
( PEA-RP140/170/200WJA )
now has a two-piece
construction. This allows
separation of the indoor unit
heat exchanger and the fan
deck assembly for easier
handling into the roof space.
optional
Must be reassembled and installed
prior to using the system.
Computerised Dehumidification
The fan speed is controlled electronically in dehumidifying mode,
increasing the range and efficiency of dehumidification.
Specifications: Ceiling-concealed (PEA)
Indoor unit
Outdoor unit
Function
Capacity (min.-max.)
(kW)
Input
(kW)
PEA-RP140WJA
PEA-RP170WJA
PEA-RP200WJA
PUHZ-RP140V/YKA2
PUHZ-RP170V/YKA2
PUHZ-RP200YKA2
Cooling
Heating
Cooling
Heating
Cooling
Heating
14.0 (6.2-15.3)
16.0 (5.7-18.0)
16.0 (9.0-20.0)
20.0 (9.5-22.4)
18.9 (9.0-22.4)
22.4 (9.5-25.0)
4.35
4.04
5.00
6.00
5.92
6.89
Rated EER/COP ✽1
3.22
3.96
3.20
3.33
3.19
3.25
Rated AEER/ACOP
3.12/3.10
3.76/3.73
3.16/3.11
3.22/3.18
3.04
3.12
AEER/ACOP (part-load %) ✽2
3.71
PEA-RP140WJA
Indoor unit
PEA-RP170WJA
Airflow
CMM
50-61-72
L/S
833-1,017-1,200
60/75/100/150
External static pressure Pa
Sound pressure level ✽3
(dB)
38-41-44
Return air spigot size
(mm)
1,100×420
(mm)
1,100×340
Supply air spigot size
Dimensions
Weight
PEA-RP200WJA
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
Power supply
Height
(mm)
470
Width
(mm)
1,370
Depth
(mm)
1,120
(kg)
108
✽1 Rated EER/COP for PEA-RP170/200WJA are measured at ESP 75 Pa.
✽2 MEPS compliant at part load
✽3 Sound pressure level for PEA-RP140/170/200WJA are measured in anechoic chamber at ESP 150 Pa.
17
Ceiling-suspended
PCA
SERIES
A stylish indoor unit design and airflow
settings for both high- and low-ceiling
interiors expand installation possibilities
Stylish Indoor Unit Design
PCA-GA
A stylish square-like design is adopted for
the indoor units of all models. As a result,
the units blend in better with the ceiling.
PCA-K A
Optional Drain Pump for
Full-capacity Models
Drain pump installation
possible
Drainage outlet can
be 600mm above
ceiling surface
The pumping height of the optional drain
pump has been increased from 400mm
to 600mm, expanding flexibility in choosing unit location during installation work.
Ceiling
surface
Equipped with Automatic Air-speed Adjustment
In addition to the conventional 4-speed setting, units are now
equipped with an automatic air-speed adjustment mode. This
setting automatically adjusts the air-speed to conditions that
match the room environment. At the start of heating/cooling
operation, the airflow is set to high-speed to quickly heat/cool the
room. When the room temperature reaches the desired setting,
the airflow speed
Strong
Gentle
is
decreased
automatically for
stable comfortable
Start of
After room
cooling/heating…
temperature is stabilised…
heating/cooling
operation.
Fresh Outside-air Intake
Static pressure (Pa)
PCA-RP50/60/71/100/125/140KAQ
● Outside-air intake characteristics
Units are equipped with a knockout hole that enables the
induction of fresh outside-air.
50
0
–50
–100
–150
–200
–250
–300
PCA-RP100–140KA
PCA-RP60/71KA
PCA-RP50KA
0
1
2
3
4
Airflow volume (m 3 /min)
optional
Equipped with High- /Low-ceiling Modes
Units are equipped with highand low-ceiling operation modes
that make it possible to switch
the airflow volume to match room
height. The ability to choose the
optimum airflow volume makes it
possible to optimise the breezy
sensation felt throughout the room.
High Standard Low
ceiling
ceiling
ceiling
Capacity
50
3.5m
2.7m
2.5m
60
3.5m
2.7m
2.5m
71
3.5m
2.7m
2.5m
100
4.2m
3.0m
2.6m
125
4.2m
3.0m
2.6m
140
4.2m
3.0m
2.6m
Specifications: Ceiling-suspended (PCA)
Indoor unit
PCA-RP50KAQ
PCA-RP60KAQ
PCA-RP71KAQ
PCA-RP71KAQ
PCA-RP100KAQ
PCA-RP125KAQ
PCA-RP140KAQ
Outdoor unit
SUZ-KA50VA3
SUZ-KA60VA3
SUZ-KA71VA3
PUHZ-RP71VHA5
PUHZ-RP100V/YKA2
PUHZ-RP125V/YKA2
PUHZ-RP140V/YKA2
Cooling
Cooling
Cooling
Cooling
Function
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
Capacity (min.-max.)
(kW) 4.9 (1.1-5.6) 5.5 (0.9-6.6) 5.7 (1.1-6.3) 6.9 (0.9-8.0) 7.1 (0.9-8.1) 7.9 (0.9-10.2) 7.1 (3.3-8.1)
Input
(kW)
Heating
Heating
Heating
8.0 (3.5-10.2) 10.0 (4.9-11.4) 11.2 (4.5-14.0) 12.0 (5.5-14.0) 14.0 (5.0-16.0) 13.0 (6.2-15.3) 16.0 (5.7-18.0)
1.49
1.68
1.67
2.02
2.06
1.96
1.96
2.21
2.63
3.02
3.66
3.88
3.97
Rated EER/COP
3.29
3.27
3.41
3.42
3.45
4.03
3.62
3.62
3.80
3.71
3.28
3.61
3.27
3.61
Rated AEER/ACOP
3.22
3.22
3.35
3.36
3.39
3.96
3.42
3.44
3.50/3.47
3.46/3.43
3.09/3.07
3.41/3.39
3.10/3.08
3.41/3.39
AEER/ACOP (part-load %) ✽
4.19/4.11
PCA-RP50KAQ
Indoor unit
PCA-RP60KAQ
PCA-RP71KAQ
PCA-RP71KAQ
PCA-RP100KAQ
4.43
3.91/3.85
PCA-RP125KAQ
PCA-RP140KAQ
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
Power supply
CMM
10-11-13-15
15-16-17-19
16-17-18-20
22-24-26-28
23-25-27-29
24-26-29-32
L/S
167-183-217-250
250-267-283-317
267-283-300-333
367-400-433-467
383-417-450-483
400-433-483-533
Sound pressure level
(dB)
32-34-37-40
33-35-37-40
35-37-39-41
37-39-41-43
39-41-43-45
41-43-45-48
Height
(mm)
Width
(mm)
Depth
(mm)
Airflow (Lo-Mi2-Mid-Hi)
Dimensions
Weight
(kg)
230
960
1,280
1,600
680
25
32
36
38
39
✽ MEPS compliant at part load
18
Wall-mounted
PKA
SERIES
Elegant design and compact dimensions
are ideal for offices, stores and
residential-use
Auto-flap Shutter Enhances Good Looks
The Intake Grille Filter Can be Completely
Removed Allowing Easy Cleaning
(Can be washed in water)
Filter slides out
Front grille
Filter
4-way Piping Provides More Flexibility
in Selecting Installation Sites
Wired Remote Controller Available
(Option)
A separately sold wired remote controller and a terminal block
are available to suit various installation sites.
Drain Pump Option Available with
All Models
PKA-RP71/100KAL
optional
standard
Installation of the drain pump enables a drain outlet as high as
800mm above the base of the indoor unit. Drain water can be
discharged easily even if the surface where the wall-mounted
unit does not have direct access outside, increasing the degree
of freedom for installation.
Drain pump
Indoor unit
800mm
Specifications: Wall-mounted (PKA)
Indoor unit
Outdoor unit
Function
Capacity (min.-max.)
(kW)
Input
(kW)
PKA-RP71KAL
PKA-RP100KAL
PUHZ-RP71VHA5
PUHZ-RP100V/YKA2
Cooling
Heating
Cooling
Heating
7.1 (3.3-8.1)
8.0 (3.5-10.2)
10.0 (4.9-11.4)
11.2 (4.5-14.0)
1.96
2.13
2.90
3.10
Rated EER/COP
3.62
3.76
3.45
3.61
Rated AEER/ACOP
3.42
3.56
3.20/3.17
3.34/3.31
Indoor unit
PKA-RP71KAL
PKA-RP100KAL
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
Power supply
CMM
18-20-22
20-23-26
L/S
300-333-367
333-383-433
Sound pressure level
(dB)
39-42-45
Height
(mm)
365
Width
(mm)
1,170
Depth
(mm)
295
(kg)
21
Airflow (Lo-Mid-Hi)
Dimensions
Weight
41-45-49
19
4-way Cassette
Compact Ceiling-concealed
SLZ
SEZ
SERIES
Compact, quiet concealed indoor units
equipped with cutting-edge control
technologies for enhanced comfort
Compact Designs
Models with capacity ranges for any room size. The dimensions of
the SLZ are perfect for 2-metre-square installations, and the SEZ
unit is a slim 200mm in height, making it ideal for tight installation
spaces.
990mm
700mm
208mm
200mm
650mm
650mm
SLZ-KA25/50
SEZ-KD35/50
Impressively Quiet
S series units offer quiet operation at a hushed noise level of
23dB (SEZ-KD25/35), ensuring a calm and comfortable
environment. They’re so quiet that you’ll find yourself checking to
see if they’re on.
● Noise level
SLZ-KA25/50VAQ (L)
Subway car
interior
Quiet passenger
car interior
(40km/h)
Library interior
80dB
60dB
40dB
Human
Sound of
hearing limits
rustling leaves (Extremely quiet)
10dB
23dB
Quiet!
optional for SLZ/SEZ-VAQ
Energy-saving Operation
Boasting low electricity consumption, SLZ/SEZ series air
conditioners are the key to fresh, cost-effective room comfort.
optional for SLZ/SEZ-VAQ
Air Cleaning Filter
SEZ-KD25/35/50/
60/71VAQ (L)
This built-in filter removes dust and other particles, keeping the air
clean all the time. Maintenance is as simple as vacuuming. The
long-life filter in SLZ series air conditioners can be used for
approximately 2,500 hours before requiring replacement.
Detail drawing of fresh-air intake
25
100
3- 2.8 hole
Burring hole
73.4
Cut-out hole
0°
120
°
A duct hole is provided in
the main body, making it
possible to intake fresh air
from outside.
Fresh-air intake
Drain pipe
Electrical box
Refrigerant pipe
Ceiling surface
12
Fresh-air Intake
118
standard for standard for
SLZ-VAL
SEZ-VAL
Specifications: 4-way cassette / Compact ceiling-concealed (SLZ, SEZ)
Indoor unit
Outdoor unit
SLZ-KA25VAQ(L)
SLZ-KA50VAQ(L)
SEZ-KD25VAQ(L)
SEZ-KD35VAQ(L)
SEZ-KD50VAQ(L)
SEZ-KD60VAQ(L)
SUZ-KA25VA3
SUZ-KA50VA3
SUZ-KA25VA3
SUZ-KA35VA2
SUZ-KA50VA3
SUZ-KA60VA3
Cooling
Function
Heating
Cooling
Heating
Cooling
Heating
Cooling
Heating
Cooling
Capacity (min.-max.)
(kW) 2.3 (0.9-3.2) 3.1 (0.9-4.5) 4.2 (1.1-5.2) 4.5 (0.9-6.5) 2.5 (0.9-3.2) 3.0 (0.9-4.5) 3.7 (1.0-3.9) 4.2 (0.9-5.0) 5.1 (1.1-5.6)
Input
(kW)
Heating
Cooling
6.4 (1.1-7.2)
5.6 (1.1-6.3)
SEZ-KD71VAQ(L)
SUZ-KA71VA3
Heating
Cooling
Heating
7.4 (0.9-8.0) 6.5 (0.9-8.3) 8.1 (0.9-10.4)
0.6
0.82
1.27
1.37
0.75
0.83
1.09
1.13
1.64
1.81
1.77
2.05
2.06
2.18
Rated EER/COP
3.83
3.78
3.31
3.28
3.33
3.61
3.39
3.72
3.11
3.54
3.16
3.61
3.16
3.72
3.66
3.23
3.22
3.21
3.49
3.31
3.62
3.05
3.48
3.11
3.55
3.10
3.66
Rated AEER/ACOP
3.65
AEER/ACOP (part-load %) ✽
4.32
Indoor unit
SLZ-KA25VAQ(L)
3.72
SLZ-KA50VAQ(L)
SEZ-KD25VAQ(L)
SEZ-KD35VAQ(L)
SEZ-KD50VAQ(L)
SEZ-KD60VAQ(L)
SEZ-KD71VAQ(L)
V: Single-phase, 50Hz, 230V
Power supply
CMM
8-9-10
8-9-11
5.5-7-9
7-9-11
10-12.5-15
12-15-18
12-16-20
L/S
133-150-167
133-150-183
92-117-150
117-150-183
167-208-250
200-250-300
200-267-333
Sound pressure level
(dB)
28-31-37
30-34-39
23-26-30
23-28-33
Supply air spigot size
(mm)
Height
Width
Depth
Airflow (Lo-Mid-Hi)
External static pressure Pa
Dimensions
Weight
5/15/35/50
—
30-34-37
860×150
30-34-38
30-35-40
—
660×150
1,060×150
(mm)
Unit: 208, Panel: 20
200
200
200
(mm)
Unit: 570, Panel: 650
790
990
1,190
(mm)
Unit: 570, Panel: 650
700
(kg)
Unit: 16.5, Panel: 3
18
700
21
700
23
27
✽ MEPS compliant at part load
20
Main Features
Main features of Mr. Slim Inverter Units
Indoor unit
SLZ-VA
SLZ-VAL
SEZ-VA
SEZ-VAL
SUZ
SUZ
SUZ
SUZ
PEAD
PLA
PEA
PKA
PUHZ
PUHZ
PCA-KA
Combination
Outdoor unit
Energy Saving
Felt Temperature Control
(i-see Sensor)
PUHZ
SUZ
Opt
Opt
Opt
Opt
PUHZ
SUZ
PUHZ
SUZ
Opt
Opt
Opt
Opt
Pure White
Attractive
Auto Vane
Fresh-air Intake
High-efficiency Filter
Air Quality
Oil Mist Filter
Long-life filter
Filter Check Signal
Opt
Horizontal Vane (Auto Swing)
Air Distribution
High Ceiling Mode
Auto Fan Speed Mode
On/Off Operation Timer
Auto Change Over *1
Auto Restart
Convenience
Low-temperature Cooling
Low-noise Operation (Outdoor Unit)
Rotation, Back-up and 2nd Stage
Cut-in Function
Opt
Opt
PAR-21MAA Control *2
Opt
Centralised On/Off Control *2
Opt
Opt
Opt
Opt
System Group Control *2
Opt
Opt
Opt
Opt
M-NET Connection *2
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
System Control
Reuse of Existing Wiring
Drain Pump
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Installation
Pump Down Switch
Flare Connection
Self-Diagnosis Function
(Check Code Display)
Maintenance
Failure Recall Function
*1 When multiple indoor units connected to an MXZ outdoor unit are running at the same time, simultaneous cooling and heating is not possible.
*2 Please refer “System Control” on page 21 for details.
*3 Not available with PEA-RP140/170/200WJA models.
*3
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Opt
21
System Controls
System Controls ( SUZ and Mr. Slim Power Inverter only )
Versatile system controls can be realised by using optional parts, relay circuits, control panels, etc.
MAJOR SYSTEM CONTROL
System Examples
Indoor Unit
S Series & P Series Indoor Unit
P Series Indoor Unit
S Series Outdoor
P Series Outdoor
Outdoor Unit
A
Details
PAR-30MAA Control
PAR-21MAA Control
Major Optional Parts Required
Standard equipment (for indoor units
compatible with wired remote controllers)
• PAR-30MAA (Wired remote controller)
• PAR-21MAA (Wired remote controller)
• One remote controller can control multiple
air conditioners with the same settings
simultaneously.
• One remote controller can control up to 16
refrigerant systems.
• Up to two remote controller can be
connected.
<S Series Outdoor Unit>
• MAC-397IF-E/MAC-333IF-E (Interface)
• PAR-30MAA (Wired remote controller)
• PAR-21MAA (Wired remote controller)
• Group of air conditioners can be controlled
by MELANS system controller (M-NET).
<S Series Outdoor Unit>
• MAC-399IF-E/MAC-333IF-E
• MELANS System controller
• PAC-SC50KUA (power supply unit)
PAR-30MAA
PAR-21MAA
B
System Group Control
MAC-397IF-E
MAC-333IF-E
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
C
M-NET Connections
Outdoor
unit
Outdoor
unit
Indoor unit
Indoor unit
PACSC50KUA
Power
supply kit
Indoor
unit
City Multi
indoor unit
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
MAC-399IF-E
MAC-333IF-E
MELANS
system controller
(AG-150A etc)
PAC-SC50KA
Power supply
unit
Indoor
unit
MELANS
system controller
(AG-150A etc)
PAR-30MAA
PAR-21MAA
<P Series Outdoor Unit>
• PAR-30MAA (Wired remote controller)
• PAR-21MAA (Wired remote controller)
<P Series Outdoor Unit>
• PAC-SF81MA-E (M-NET converter)
• MELANS System controller
• PAC-SC50KUA (power supply unit)
M-NET adapter
PAC-SF81MA-E
FOR P SERIES AND S SERIES INDOOR UNITS
System Examples
Wired remote controller
A
Wireless remote controller
2-remote Controller
Control
• Up to two remote controllers can be
connected to one group.
With two remote controllers, control
can be performed locally and
remotely from two locations.
PAR-SL97A-E
PAR-30MAA
PAR-21MAA
PAR-30MAA
PAR-21MAA
* Set "Main" and "Sub"
remote controllers.
(Example of 1 : 1 system)
B
Operation Control by
Level Signal
Air conditioner can be started/
stopped remotely. In addition,
On/Off operation by local remote
controller can be prohibited/permitted.
Relay box (to be purchased locally)
Adapter for
remote
On/Off
Wired remote
controller
Wired remote
controller
Remote Display of
Operating Status
Remote operation adapter/
Connector cable for remote display +
Relay box
PAR-30/
21MAA
(Example of 1 : 1 system)
E
Timer Operation
Allows On/Off operation with
timer
*For control by an external
timer, refer to B Operation
Control by Level Signal.
PAR-30MAA
(Example of 1 : 1 system)
• Operation other than On/Off (e.g., adjustment of temperature, fan speed, and airflow)
can be performed even when remote
controller operation is prohibited.
• Timer control is possible with an external
timer.
• Adapter for remote On/Off
PAC-SE55RA-E
• Relay box (to be purchased locally)
• Remote control panel (to be purchased
locally)
• The pulse signal can be turned On/Off.
• Operation/emergency signal can be
received at a remote location.
• Connector cable for remote display
PAC-SA88HA-E / PAC-725AD
(10 pcs. x PAC-SA88HA-E)
• Relay box (to be purchased locally)
• Remote control panel (to be purchased
locally)
• Operation/emergency signal can be
received at a remote location (when
channeled through the PAC-SF40RM
no-voltage signal, when channeled through
the PAC-SA88HA-E DC 12V signal).
• Remote display panel (to be purchased
locally)
• Connector cable for remote display
PAC-SA88HA-E / PAC-725AD
(10 pcs. x PAC-SA88HA-E)
• Relay box (to be purchased locally)
• Remote operation adapter
PAC-SF40RM
PAR-SL97A-E
Relay box (to be purchased locally)
Connector
cable for
remote
display
Remote
control
panel
PAR-SL97A-E
(Example of 1 : 1 system x 2)
Remote operation adapter/
Connector cable for remote display +
Relay box
Operating status can be
displayed at a remote location.
Remote
display
panel
• Wired Remote Controller
PAR-30MAA
PAR-21MAA
(for PKA, PAC-SH29TC-E is required)
• Wireless Remote Controller
PAR-SL97A-E (for SEZ and PEAD)
• Wireless Remote Controller Kit for PCA
PAR-SL94B-E
(Example of 1 : 1 system x 2)
Connector
cable for
remote
display
(Example of 1 : 1 system x 2)
D
Remote
control
panel
Relay box (to be purchased) locally)
Remote
control
panel
• Both wired and wireless remote controllers
can be used in combination.
Major Optional Parts Required
(Example of Simultaneous Twin)
Adapter for
remote
On/Off
Remote
control
panel
Operation Control by
Pulse Signal
* When using wired and
wireless remote controllers
Relay box (to be purchased) locally)
(Example of 1 : 1 system x 2)
C
Details
Remote
display
panel
*Unable to use with wireless remote controller
PAR-SL97A-E
(Example of Simultaneous Twin)
• Weekly Timer:
On/Off and up to 8 pattern temperatures can
be set for each calendar day. (Initial setting)
• On/Off Timer:
On/Off can be set once each within 72 hr in
intervals of 5-minute units.
• Auto-off Timer:
Operation will be switched off after a certain
time elapse. Set time can be changed from
30 min. to 4 hr. at 10 min. intervals.
*Simple Timer and Auto-off Timer
cannot be used at the same time.
Standard functions of PAR-30MAA
22
Specifications
Specification: Outdoor Unit
Outdoor unit
SUZ-KA25VA3
SUZ-KA35VA2
SUZ-KA50VA3
External finish
Munsell 3.0Y 7.8/1.1
Power supply
Single-phase, 50Hz, 230V
(kW)
0.65
0.85
0.9
1.2
34 (568)/32 (534)
33 (551)
49 (818)
51 (850)/49 (816)
50 (835)/48 (800)
Cooling mode
46
47
53
55
Heating mode
46
48
55
55
59
61
68
69
Airflow (cooling/heating)
CMM (L /S)
(dB)
Sound level
Dimensions
SUZ-KA71VA3
0.55
Compressor output
Sound pressure
level (dB)
SUZ-KA60VA3
Height
(mm)
550
850
880
Width
(mm)
800
840
840
Depth
(mm)
285
330
330
Weight
(kg)
Chargeless piping length
(m)
Max. piping length
(m)
20
30
Breaker size
(A)
10
20
30
33
50
53
53
7
*Above specifications are for outdoor units only.
Outdoor unit
PUHZ-RP71VHA5
PUHZ-RP100V/YKA2
PUHZ-RP125V/YKA2
External finish
Munsell 3.0Y 7.8/1.1
Power supply
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
(kW)
Compressor output
1.6
1.9
60 (1,000)
110 (1,830)
Cooling mode
47
49
50
50
Silent mode
44
46
47
47
Heating mode
48
51
52
52
(dB)
66
69
70
70
Height
(mm)
943
1,338
Width
(mm)
950
1,050
Depth
(mm)
330
330
Airflow (cooling/heating)
Sound pressure
level (dB)
Sound level
Dimensions
PUHZ-RP140V/YKA2
CMM (L /S)
2.4
120 (2,000)
Weight
(kg)
67
Chargeless piping length
(m)
30
30
Max. piping length
(m)
50
75
Protection device
2.9
V: 118 Y: 119
V: 120 Y: 121
Discharge thermo, HP switch
Rated running current
(cooling/heating)
(A)
9.05/9.64
Breaker size
(A)
25
V: 12.64/13.58 Y: 4.42/4.75
V: 16.36/16.90 Y: 5.73/5.91
V: 32 Y: 16
V: 17.17/19.23 Y: 6.01/6.73
V: 40 Y: 16
*Above specifications are for outdoor units only.
23
Specifications
Specifications: Outdoor Unit
Outdoor unit
PUHZ-RP170V/YKA2
PUHZ-RP200YKA2
External finish
Munsell 3.0Y 7.8/1.1
Power supply
V: Single-phase, 50Hz, 230V Y: Three-phase, 50Hz, 400V
(kW)
Compressor output
140 (2,330)
Cooling mode
58
Silent mode
56
Heating mode
59
(dB)
76
Height
(mm)
1,338
Width
(mm)
1,050
Depth
(mm)
330
Sound level
Dimensions
3.6
CMM (L /S)
Airflow (cooling/heating)
Sound pressure level (dB)
3.0
Weight
(kg)
Chargeless piping length
(m)
30
Max. piping length
(m)
75
V: 127 Y: 131
136
Discharge thermo, HP switch
Protection device
Rated running current (cooling/heating)
(A)
V: 19.4/23.9 Y: 6.8/8.3
8.2/9.7
Breaker size
(A)
V: 40 Y: 32
32
*Above specifications are for outdoor units only.
Notes for All Specifications
Rating conditions (AS/NZS 3823)
Cooling - Indoor: 27°C (80°F) DB, 19°C (66°F) WB
Outdoor: 35°C (95°F) DB
Heating - Indoor: 20°C (68°F) DB
Outdoor: 7°C (45°F) DB, 6°C (43°F) WB
Refrigerant piping length (one-way): 5m (16ft.)
Total input based on the indicated voltage (indoor/outdoor)
50Hz
Indoor
Outdoor
Single-phase, 230V
Single-phase, 230V/ Three-phase, 400V
Guaranteed Operating Range
SUZ-KA
PUHZ
25/35
50/60/71
71/100/125/140/170/200
Upper limit (DB)
46°C
43°C
46°C
Lower limit (DB)
–10°C
–15°C
–5°C (–15°C )
Upper limit (DB)
24°C
24°C
21°C
Lower limit (DB)
–15°C
–15°C
–20°C
Cooling
Heating
With the optional air protection guide, the operation at –15°C outdoor temperature is possible.
Sound Pressure Level
• Sound pressure measurements were conducted in an anechoic chamber.
• The actual noise level depends on the distance from the unit and the acoustic environment.
Optional Parts
24
Optional Parts
Part name
Air discharge guide
Air outlet shutter plate
Air protection guide
Control/service tool
Centralized drain pan
Model name
PAC-SG59SG-E
PUHZ-RP71
PAC-SH96SG-E
PUHZ-RP100/125/140/170/200
PAC-SH51SP-E
PLA-RP
PAC-SH63AG-E
PUHZ-RP71
PAC-SH95AG-E
PUHZ-RP100/125/140/170/200
PAC-SK52ST
Flange for fresh-air intake
Liquid refrigerant dryer
for pipe ø9.52
PEAD-RP71
PAC-KE94TB-E
PEAD-RP100/125
PAC-KE95TB-E
PEAD-RP140
i-see sensor corner panel
PAC-SA1ME-E
PLA-RP
PUHZ-RP71/100/125/140/170/200
Shutter plate
PAC-SH51SP-E
PLA-RP
PAC-SG64DP-E
PUHZ-RP71
PAC-SH97DP-E
PUHZ-RP100/125/140/170/200
Joint pipe 9.52 12.7
15.88 19.05
PAC-SG73RJ-E
PAC-SG75RJ-E
PUHZ-RP71/100/125/140/170/200
PUHZ-RP71/100/125/140
PAC-SH94DM-E
PKA-RP
M-NET converter
PAC-SF81MA-E
PUHZ-RP71/100/125/140/170/200
Multi-function casement
PAC-SH53TM-E
PLA-RP
PAC-SG94HR-E
PKA-RP
PAC-SG96HR-E
PCA-RP50/60/71/100/125/140KAQ
PAC-SG97HR-E
PEAD-RP
Filter box
PCA-RP50KAQ
PCA-RP71/100/125/140KAQ
PCA-RP60KAQ
Power supply terminal kit
PAC-KE07DM-E
SEZ-KD
PAC-SG61DS-E
PUHZ-RP71/100/125/140/170/200
PAC-SH65OF-E
PLA-RP
PUHZ-RP
MA & Contact terminal interface
MAC-397IF-E
SLZ-KA, SEZ-KD, PLA-RP60/71*1
PEAD-RP71*1, PCA-RP50/60/71*1
M-NET interface
MAC-399IF-E
SLZ-KA, SEZ-KD, PLA-RP60/71*1
PEAD-RP71*1, PCA-RP50/60/71*1
M-NET &Terminal interface
MAC-333IF-E
SLZ-KA, SEZ-KD, PLA-RP60/71*1
PEAD-RP71*1, PCA-RP50/60/71*1
Wireless remote controller
PAR-FL32MA-E
PEAD-RP
Wireless remote controller
signal receiver
High efficiency filter
Application name
PLA-RP
PAC-SH84DM-E
High efficiency filter element
PAC-SG82DR-E
Wireless remote controller
signal sender
Model name
PAC-KE93TB-E
PAC-SH85DM-E
Drain socket
Part name
PAC-SH59KF-E
PAC-SH83DM-E
Drain pump
Application name
PAC-SH52HR-E
PLA-RP
Remote On/Off adaptor
PAC-SE55RA-E
All indoor units
Remote operation adaptor
PAC-SF40RM-E
All indoor units*2 (excluding PKA-RP)
Remote sensor
PAC-SE41TS-E
All indoor units
Space panel
PAC-SH48AS-E
PLA-RP
Terminal block
PAC-SH29TC-E
PKA-RP for wired remote controller
Connector cable
for remote display
PAC-SA88HA-E
All indoor units
PAR-30MAA
All indoor units
(excluding SLZ-VAL and SEZ-VAL)
PAR-21MAA
All indoor units
(excluding SLZ-VAL and SEZ-VAL)
Wired remote controller
PAR-SL97A-E
SEZ-KD, PLA-RP
PAR-SA9CA-E
SEZ-KD, PEAD-RP
Wireless remote controller kit
(Sender & Receiver)
PAR-SL94B-E
PCA-RP
PAR-SA9FA-E
PLA-RP
Power supply unit
PAC-SC50KUA
All outdoor units
PAC-SH88KF-E
PCA-RP50KAQ
PAC-725AD
All indoor units
PAC-SH89KF-E
PCA-RP60/71KAQ
Multiple remote controller
adaptor
PAC-SH90KF-E
PCA-RP100/125/140KAQ
*1 P series indoor units can be used in combination with SUZ outdoor units.
*2 Unable to use with wireless remote controller
Refrigerant Piping
Capacity
SUZ-KA25
SUZ-KA35
SUZ-KA50
SUZ-KA60
SUZ-KA71
PUHZ-RP71
PUHZ-RP100/125/140
PUHZ-RP170/200
Between indoor & outdoor units
Max. height difference (m)
Max. piping length (m)
12
20
12
30
30
30
30
30
30
20
30
30
30
50
75
75
Pipe size OD (mm)
Thickness (mm)
Liquid: ø6.35
t 0.8
Gas:
ø9.52
t 0.8
Liquid: ø6.35
t 0.8
Gas:
ø9.52
t 0.8
Liquid: ø6.35
t 0.8
Gas:
ø12.7
t 0.8
Liquid: ø6.35
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø15.88
t 1.0
Liquid: ø9.52
t 0.8
Gas: ø25.4
t 1.0
25
Amount of Necessary Refrigerant
Amount of Necessary Refrigerant ( R410A: kg )
Factory charged
Additional charged
Calculation
Piping length
7m
10m
15m
20m
25m
30m
SUZ-KA25
0.8
0.15
0.3
0.45
—
—
SUZ-KA35
1.05
0.15
0.3
0.45
—
—
SUZ-KA50
1.6
0.06
0.16
0.26
0.36
0.46
SUZ-KA60
1.8
0.06
0.16
0.26
0.36
0.46
SUZ-KA71
1.8
0.165
0.44
0.715
0.99
1.265
Xg = 30g/m × (length-5) m
Xg = 20g/m × (length-7) m
Factory charged
Xg = 55g/m × (length-7) m
Additional charged
Piping length
10 - 30m
31 - 40m
41 - 50m
51 - 60m
61 - 75m
PUHZ-RP71
3.5
0.6
1.2
—
—
PUHZ-RP100/125/140
5.5
0.6
1.2
1.8
2.4
Factory charged
Additional charged
Piping length
PUHZ-RP170/200
10 - 30m
31 - 40m
41 - 50m
51 - 60m
61 - 70m
7.7
0.9
1.8
2.7
3.6
26
NOTICE
■ Air conditioners in this brochure contain and operate with refrigerant R410A and synthetic oils.
Before attempting any installation work you must read the installation instructions.
New tools, materials and procedures are required to install these products.
Under Australian Law, only persons suitably licensed are permitted to install and service air conditioning units.
Refer to Country, Commonwealth, State or Territory legislation, regulations and industry codes of practice, before installation
of these products.
Recovery and disposal of waste material must comply with Country, Commonwealth, State or Territory guidelines.
■ Do not install indoor units in areas (e.g., mobile phone base stations) where the emission of VOCs such as phthalate
compounds and formaldehyde is known to be high as this may result in a chemical reaction.
■ When installing or relocating or servicing the air conditioners, use only the specified refrigerant (R410A) to charge the
refrigerant lines.
Do not mix it with any other refrigerant and do not allow air to remain in the lines.
If air is mixed with the refrigerant, then it can be the cause of abnormal high pressure in the refrigerant lines, and may
result in an explosion and other hazards.
The use of any refrigerant other than that specified for the system will cause mechanical failure or system malfunction or
unit breakdown. In the worst case, this could lead to a serious impediment to securing product safety.
Warm, even heat in winter and cool
comfort in summer is only a phone
call or click away.
Simply contact your nearest Mitsubishi Electric Specialist today and you can find out all there is to
know about how to enhance your living environment. Our specialists are fully qualified to give you
all the right advice on which Mitsubishi Electric Air Conditioning System is right for you.
To locate your nearest Mitsubishi Electric Specialist go to our website
http://www.MitsubishiElectric.com.au
They will determine whether a Compact Inverter System or a Power Inverter System best suits
your needs, both in comfort and efficiency. You can either visit one of our Specialist’s Showrooms,
or they will happily arrange for one of their Consultants to come to your home.
All Mitsubishi Electric Compact and Power Inverter Systems are MEPS (Minimum Efficiency
Performance Standard) Compliant, so you can be sure that they will give you the performance and
efficiency that they were designed to deliver.
these products.
EC97J1132
http://www.mitsubishielectric.com.au/
L-179-7-C7654-H 1204 Printed in Japan (NLP)
Revised publication, effective Apr. 2012.
Superseding publication L-179-7-C7654-G Apr. 2011.
Specifications subject to change without notice.