- No category
advertisement
Description
P+ Digital Back Overview
P 65+
World’s first full frame medium format digital back, featuring
Sensor+ with a choice of 60.5 megapixels for finest resolution or scaled full frame captures for fast workflow and low light versatility.
P 40+
Fastest digital back with up to 1.8 fps in
Sensor+ mode.
A choice of 40 or
10 megapixels and an ISO range from 50 to 3200 makes this digital back the mo st versatile tool in the range.
P 45+
High resolution shooter with unlimited burst sequences and optimized for large format photography with live preview functionality for easy composition and focus checking.
P 30+ Achromatic+
The top quality fast fashion shooter with
ISO 1600, with superior moiré control and well suited for harsh environments.
The Achromatic+ digital camera back is designed to be a high performance black and white only product with no color filters on the sensor.
Sensors
P 40+ Camera System
40.4 mm
32.9 mm
36.8 mm
33.1 mm
36.8 mm
Lens Factor
CCD size effective
Active pixels
Pixel size
(micron)
Resolution
(megapixels)
1.0
53.9 x 40.4 mm
8984 x 6732
Full res.
6 x 6
60.5
Sensor +
12 x 12
15.0
43.9 x 32.9
7320 x 5484
Full res.
6 x 6
40
1.3
Sensor +
12 x 12
10
1.1
49.1 x 36.8
7216 x 5412
6.8 x 6.8
39
1.3
44.2 x 33.1
6496 x 4872
6.8 x 6.8
31.6
1.1
49.1 x 36.8
7216 x 5412
6.8 x 6.8
39
Light sensitivity
(ISO)
Exposure time
Image quality
50-
800
200-
3200
50-
800
200-
3200
50-800 100-1600 50-800
1/10.000 sec. – 1 minute 1/10.000 sec. up to one hour with XPose+ technology
16bit-OptiColor +, 12 f-stops Dynamic+ and Lens+ technology
12 f-stops
Dynamic+ &
Lens+ technology
Capture time
(frames per sec.**)
1.0
1.4
1.2
1.8
0.67
0.8
0.67
Battery Lifetime
(up to captures/up to stand-by time*)
2000 / 3 2500 / 4 2500 / 4 3000 / 4 2500 / 4
Image buffer
Display
1.3 GB High Speed RAM 640 MB high speed RAM
2.2” QVGA TFT with 230,000 pixels, high brightness and contrast both indoor and outdoor, very fine details
Results are based on testing in Phase One’s testing department. Variation may be expected due to specific camera set up. Battery used for test is new 2500mAh Li+.
*) standby Time will vary a lot depending on temperature, usage of battery and state of the back e.g. Zero Latency will increase power consumption significantly
**) Maximum expected performance. The actual performance will be dependent on the camera model and on the camera and digital back capture modes content is subject to change without notice
Your local Phase One partner
© Phase One
Inset photo by Steen Tronsgaard & Kajsa Björnberg
Capture Revolution
The Phase One P 40+ Camera system is designed to be a seamless extension of your creativity. Extraordinary capture becomes natural through ease of use and direct control.
Take advantage of the Phase One digital focal plane lenses or Schneider
Kreutznach leaf shutter lenses. You can also use your Mamiya 645 AF/AFD or
Hasselblad V lenses for an even broader choice.
The P 40+ is a capture revolution. With capture rates of up to 1,8 frames per second in Sensor+ mode and an ISO range from 50 to 3200, this digital back is truly revolutionary.
The Sensor+ technology allows you to switch between 40 and 10 megapixel captures, offering a unique tool for almost any job.
what the world’s best photography is made of
www.phaseone.com
P 40+ Digital Back Specifications
l Sensor+ technology solution l Switch between 40 and 10 megapixel captures using Sensor+ l 40 megapixels for highest image quality and detail level l 10 megapixels for higher sensitivity and faster workflow l ISO range from 50 – 3200 l Fast capture rates - up to 1.8 fps.
l Extreme 12.5 f-stop dynamic range
© Phase One
Inset photo by Steen Tronsgaard & Kajsa Björnberg
Imaging technology
Lens Factor
Resolution
1.3
40 megapixels
Active pixels 7320 x 5484 pixels
CCD size effective 44 mm x 33 mm
Pixel size
Image ratio
Dynamic range
6 x 6 micron
4:3
12.5 f-stops
P 40+ full resolution capture mode
Resolution 40 megapixels
Pixel size
RAW file compression
ISO
6 x 6 micron
IIQ large: 40 MB
IIQ small: 26 MB
50, 100, 200, 400, 800
Sensor + capture mode
Resolution 10 megapixels
Pixel size
RAW file compression
ISO
12 x 12 micron
IIQ large: 10 MB
IIQ small: 7 MB
200, 400, 800, 1600, 3200
Output files
Color depth 16 bit per color
Image file formats All output formats of Capture One are possible: TIFF-RGB, TIFF-CMYK, JPEG
Color management RGB, Embedded ICC profile, CMYK
LCD screen
Size
Resolution
Viewing angle
2.2"
230,400 pixels
160º
Lighting
Supports all photographic lights:
Flash, tungsten, daylight, fluorescent, HMI
Operating conditions
Temperature
Humidity
0º to 40ºC (32º to 122ºF)
15 to 80% RH (non-condensing)
Computer minimum requirements
Mac Fast Intel Core™ 2 Duo or later CPU, 4 GB RAM,
Fast HDD: RAID 0 configured systems for max performance, Nvidia 8800 series graphics card or newer
PC Intel ® Pentium ® 4, 2 GB RAM, 10 GB free hard disk space, IEEE 1394 interface, Windows XP ®
Pack 3 or Windows Vista ® , Service Pack 1
, Service
P+ back mounts
Phase One/
Mamiya
Phase One 645DF/AF
Mamiya 645DF/ AFDIII
Phase One H101 Hasselblad H1 and H2
Hasselblad V
Contax
Hasselblad 555ELD, 553ELX, 503CW and 501CM
Via adaptor: Mamiya RZ67 Pro II
Mamiya RB67
Contax 645 AF
Wide angle & technical cameras
4 x 5" via FlexAdaptor: Arca Swiss, Cambo, Linhof, Toyo,
Sinar, Plaubel, Horseman.
Storage files
Phase Ones IIQ RAW file format speeds up the image capture and file transfer. It increases the storage capacity by turning the full 16 bit image data into a compact RAW file format.
The default IIQ RAW-large format is completely lossless.
Software
Capture One 4.8.3 or later
Certifications
CE content is subject to change without notice
645DF Camera Body Specifications
l Open platform for maximum choice and compatibility l Durable, proven platform for secure operation l Ergonomic handling and ease of use l Use Phase One digital lenses, Mamiya AF/AFD lenses or Hasselblad V lenses l Guaranteed up to 300.000 captures or 3 years (VA) l Exposures from 1/4000s to 60 minutes l Flash synchronization up to 1/1600 sec.
Shutter speed from 1/4000s to 60 minutes, B and X modes can match the extreme long exposure capability of the P+ digital backs or stop action with fast shutter speed or flash.
The mirror and viewfinder of the Phase One 645DF camera are almost three times larger than those of 35mm cameras, providing much greater control of focus and composition.
While hosting a complete list of features and custom functions, the Phase One 645DF camera is extremely easy to use. All settings important to the exposure are easily controlled by manual dials and soft buttons.
Camera type Modular 645 AF SLR body
Lenses
Phase One Digital focal plane lenses,
Schneider Kreutznach leaf shutter lenses and Mamiya 645 AFD lenses
Compatible with Hasselblad V lenses
Backs
Auto focus
Shutter
Open platform back mount
TTL phase-difference AF with 3 focus points
Focus confirmation in manual mode
Infrared AF assists for unfailing focus
Auto focus lock for swift AF/ M shift
1/4000s to 60 minutes
Up to 2 fps
Shutter speed bracketing
Flash
Light
Metering
Focal plane shutter: Up to 1/125s
Leaf shutter lenses: Up to 1/1600s’ 1 st and
2 nd curtain flash synchronization
X sync terminal and support for TTL flash
TTL metering (average, spot and auto)
Programmable AEL button
Exposure compensation: +/- 5EV
Mirror-Up Electronically-activated by switch on grip
Viewfinder
Focusing
Screen
Selftimer
Remote
Fixed prism viewfinder
Exchangeable diopter from -5 to +3
LCD panel with full exposure information
Interchangeable focus screens
Laser engraved mask for digital back
Matte, Grid, Checker, Microprism
Self-timer from 2 to 60 sec
Screw-in cable release on shutter button
Terminal for electronic triggering devices
Stop Down
Preview
Stop down button on front of camera
Tripod Socket 1/4 inch and 3/8 inch included
Power
Requirements
User configuration
Size
6 AA batteries (standard or rechargeable)
External battery pack – 6 AA batteries
External AC adapter
3 Custom dial modes for capture settings
36 custom settings
Customizable dials and buttons
W, H, D // 6, 5, 7.2" // 153, 128, 184mm
Weight 35 oz. / 1030g. w/o batteries content is subject to change without notice
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement