SURFACE PREPARATION

IMPACT BREAKER

IMPACT BREAKER

Here’s a solution to bulky compressors, leaking hoses, hot hydraulic oil and every other problem that makes running a jackhammer on small jobs so expensive. It’s the M102 Bittybreaker®

It just might be the most useful hand-operated construction tool that you will ever use. Produces an incredible 1450 ft lbs of destructive energy per blow. Accepts a wide range of industry standard 1-1/8” x 6” shank jackhammer tools for any number of job applications. A Bittybreaker® quickly makes a sledgehammer or pick axe a thing of the past because it concentrates the blow force on the same spot until the job gets completed.

If you’re looking for an inexpensive and productive solution to some real expensive problems, put a

Bittybreaker® to work.

WHAT IT DOES

• CUT ASPHALT

• TAMP DIRT

• BREAK CONCRETE

• BREAK FROST

• CHOP ROOTS

SPECIFICATIONS

Hex Shank 1-1/8 inch (28 mm) hexagon

Tool Retainer Accepts jackhammer tools with standard upset collar

Length 43 inches (1092 mm), less jackhammer tool

Impact Energy 1450 ft. lbs.

Frequency 10 to 20 blows/min as determined by operator

Weight 22 lbs (10 kg), less tool

All specifications are general in nature and are not intended for specific application purposes. General Equipment Company reserves the right to make changes in design, engineering, or specifications and to add improvements or discontinue manufacture at any time without notice or obligation. Consult applicable Operator Manual before utilizing. Refer to OSHA 2207 and/or current revisions for specific safety information. Names depicted are the registered trademarks of their respective owners.