Samsung VP-D36 Series Specifications

Data Sheet
TFT LCD Monitor Control Board
NCB200E1(VE)-DS-AB
Kordis Media Co., ltd.
Decomber. 2003
3F, 1006-9, Sadang-Dong,
Dongjak-Ku, Seoul
156-090, Korea
TEL : 82-2-585-8347
FAX : 82-2-585-8391
1
Kordis Media Co.,ltd
Data Sheet
•
INTRODUCTION
---------------------------------------------
4
•
GENERAL SPECIFICATION
---------------------------------------------
5
•
SYSTEM DESIGN
---------------------------------------------
7
•
BLOCK DIAGRAM
---------------------------------------------
8
•
ASSEMBLY NOTES
---------------------------------------------
9
•
CONNECTION & OPERATION
---------------------------------------------
11
•
OSD
•
OSD FUNCTION
•
CONNECTOR, PINOUT & JUMPER
•
CONTROLLER DIMENSIONS
---------------------------------------------
29
•
APPLICATION NOTES
---------------------------------------------
30
•
TROUBLESHOOTING
---------------------------------------------
31
•
APPLICABLE GRAPHIC MODE
---------------------------------------------
32
•
ACCESSORY
---------------------------------------------
33
•
APPENDIX
---------------------------------------------
33
-------------------------------------------------------------------------------------------------------------------------------------
12
14
23
2
Kordis Media Co.,ltd
Data Sheet
Preliminary Release
2003. 05 Update Data Sheet for NCB200E1
2003. 12 VE Update Data Sheet for NCB200E1
2004.04. Update Ver 1.5 F/W for NCB200E1
( Blurred SXGA 60Hz )
2004.06. Update Ver 1.6 F/W for NCB200E1
(Picture moves one line to the bottom after
auto-adjust and panel OFF/ON)
3
Kordis Media Co.,ltd
Data Sheet
Designed for LCD monitor and other flat panel display application the NCB200E1 controller provides an autoinput synchronization and easy to sue interface controller for:
TFT (active matrix) LCD panels of 640x480, 800X600, 1024X768 and 1024x768 resolutions
Computer video signals of VGA, SVGA, XGA, SXGA standard.
Input Signal Support
All VESA standard
Ensure that you have all parts & they are correct, refer to:
Connection diagram
Connector reference
Assembly notes
Check controller switch & jumper settings (errors may damage the panel)
Prepare the PC
Connect the parts
Understand the operation & functions
This equipment is for use by developers and integrators. The manufacturer accepts no liability for damage
or injury caused by the use of this product. It is the responsibility of the developer, integrators or other
users of this product to:
Ensure that all necessary and appropriate safety measures are taken.
Obtain suitable regulatory approvals as may be required.
Check power settings to all component parts before connection.
There is no implied or expressed warranty regarding this material.
4
Kordis Media Co.,ltd
Data Sheet
No.
Item
1
Model name
2
LCD Module
SXGA
3
Signal Input
Analog RGB Input
4
5
Description
For SXGA Panel
NCB200E1
Resolution
H: 31
80kHz
Support
V: 55
76Hz
Note 1)
OSD Control
Menu, Left, Right, Up, Down, Source, Power
Plug & Play
VESA DDC 2B Ver1.3
6
Power Connector
7.
Power Consumption
8
Signal Connector
Input
5 keys
Type: IEC320 MALE 3Line Connector
Supply Voltage
12Vdc
Max Power
50W (With Back-Light Inverter)
Analog
DSUB 15P(R, G, B Separate H, V Sync)
-
5
Kordis Media Co.,ltd
Data Sheet
Description
Signal
Unit
Min
Typical
Max
Remarks
Power In (12Vdc)
Input
Vdc
Consumption
Watt
11.4
12
12.6
50
RGB Input
Description
Analog RGB
Vp-p
0
0.7
-
Sync
Vdc
0
5
5.5
H Frequency
KHz
31
V Frequency
Hz
55
Signal
Unit
Min
80
Depends on Mode
60
77
Depends on Mode
Typical
Max
Remarks
80
Depends on Mode
TTL LCD Interface
RGB Data
Vp-p
3.3
DE, Sync, Clock
Vp-p
3.3
Clock Freq.
MHZ
25
LCD Power (12V)
Vdc
11.4
12V
12.6
Jumper option
LCD Power(5V)
Vdc
4.5
5
5.5
Jumper option
LCD Power(3.3V)
Vdc
3.16
3.3
3.5
Jumper option
Vp-p
(mV)
250
350
450
Different +/-
Power
V
11.4
12
12.6
On/Off control
V
0
3.3
Brightness
control
V
3.3
0
Step
0
100
LVDS Interface
Differential
output
Inverter Interface
L=off, H=on
OSD Value
6
Kordis Media Co.,ltd
Data Sheet
A typical LCD based display system utilizing this controller is likely to comprise the following.
J9 Jumper for Panel Type.
J6
J8
J21
J11 Jumper for LCD Power
J14 Jumper for Output Power
J16
J2
J1
J15
12. DC Power Jack (12V)
11. ANALOG VGA Input
10. OUTPUT POWER
7
Kordis Media Co.,ltd
Data Sheet
E2
POWER
8
Kordis Media Co.,ltd
Data Sheet
This controller is designed for monitors and custom display projects using 1280x1024, resolution TFT LCD
panels with a VGA, SVGA, XGA and SXGA signal input. The following provides some guidelines for
installation and preparation of a finished display solution.
: Before proceeding it is important to familiarize yourself with the parts making up the system
and the various connectors, mounting holes and general layout of the controller. As much as possible
connectors have been labeled. Guides to connectors and mounting holes are shown in the following relevant
sections.
This controller has 12V, 5V or 3.3V LVDS interface logic on the Board for different kind of
TFT LCD panel. For the other type of LCD interface like a TMDS interface and etc, this board can
accommodate a daughter board instead of on-board LCD interface. Due to the different signal timing and
electrical characteristics from each LCD panel manufacturer, for selecting LCD interface type and resolution,
put jumper marked J9 on the right position following LCD panel specification. For selecting DC power level,
put jumper marked J11 on the right position. Supplied power level depends on LCD panel specification.
Handle the controller with care as static charge may damage electronic components, Make
sure correct jumper and switches settings to match the target LCD panel
: Different makers and models of LCD panel require different panel signal connectors
and different pin assignments.
In order provide a clean signal it is recommended that LCD signal cables should not
longer than 30cm. If loose wire cabling is utilized these can be a made into a harness with cable ties.
Care should be taken when you place the cables to avoid signal interface. Additionally it may necessary
in some systems to add ferrite cores to the cables to minimize signal noise.
: This will be required for the backlight of an LCD, some LCD panel have an inverter built in. As
LCD panels may have 1 or more backlight tubes and the power requirements for different panel
backlights may vary it is important to match the inverter in order to obtain optimum performance. See
application notes for more information on connection.
Different inverter models require different cables and different pin assignment. Make
sure the correct cable pin out to match the inverter. Unsuitable cable pins out may damage the inverter.
See Operational Function section.
9
Kordis Media Co.,ltd
Data Sheet
This LED shows the state of controller.
Green – Normal state
Off – Off mode (Can’t find video signals)
Amber – DPMS mode
This switch is located on OSD button board.
+12Vdc is required to supply power for the controller, the Inverter and the LCD panel
As this may affect regulatory emission test result, a suitably shielded cable should be
utilized.
Shielding will be required for passing certain regulatory emissions tests. Also the choice of video board
and power supply can affect the test result.
Electrical insulation.
Preventing electrical shock such as ESD
Grounding.
EMI shielding.
Heat & ventilation
Ensure that the adequate insulation is provided for all areas of the PCB with special attention
to high voltage parts such as the inverter.
Once the circuit has been connected, a setup procedure for optimal is requires a few minutes The
following instructions are likely to form the basis of the finished product operation manual.
The PC needs to be set to an appropriate graphics mode that has the same resolution with the LCD
panel to have clear screen image. And the vertical refresh rate should be set to one of 56~75Hz, non –
interlaced signal.
The OSD (On Screen Display) provides certain functions to have clear image and others. This board
supports 4 buttons OSD operation as a standard. The control functions defined on OSD operation are as
below.
10
Kordis Media Co.,ltd
Data Sheet
A few guidelines:
Signal quality is very important, if there is noise or instability in the PC graphics output this
may result in visible noise on the display
Refer to the graphic modes table in specification section for supported modes.
Non-interlaced & interlaced video input is acceptable.
Never connect or disconnect parts of the display system when the system is powered up as this
may cause serious damage.
: Connect the inverter (if it is not built- in the panel) to the CCFT lead
connector of the LCD panel.
: Plug the signal cables direct to J6(Dual Channel) of the controller board. Plug
the other end of cables to the LCD connector board (if connector board is required, otherwise the
signal can be directly plugged to the LCD panel connector).
Plug the inverter cable to J10 or 16 of the controller board and another end
to the connector on the inverter.
Plug the OSD switch mount cable to J8 of the controller board and
another end to the OSD board.
Check all jumpers J14 (External power Setting), J11 (Target panel power is
setting) and J9 (Target Panel Option switch) are set correctly. Details referring the jumpers and
switches setting table (in the following section)
Plug the VGA cable to the connector J1 of the controller board.
Plug the DC 12V power in to the connector J2.
Switch on the controller board and panel by using the OSD switch mount.
If you use supplied cables & accessories, ensure that they are correct for the model of the panel
and the controller.
If you make your own cables & connectors, refer carefully to both the panel & inverter
specifications and the section in this manual, “Connectors, Pin outs & Jumpers” to ensure the
correct pin to pin wiring.
The controller has been designed to take a very wide range of input signals however to optimize the
11
Kordis Media Co.,ltd
Data Sheet
PC’s graphic performance we recommend choosing 60Hz vertical refresh rate – this will not cause
screen flicker.
The OSD (On Screen Display) provides certain functions to have clear image and others. This board supports
4 buttons OSD operation as a standard. The control functions defined on OSD operation are as below.
(unit: mm)
Appearance
SEL
MEN
AUTO
POWER
LED
DOWN
ON/OFF
Source change
8.5
1.6
3
Button
Function
Status
Power
Power on/off
On/Off
Menu
Activate menu
Select
Menu Select
LED
Indicates operation status
DOWN, UP
Cursor control(Value Control)
HOT Key
Auto setting
Green/ Off/ Amber
Down(Decrement)/Up(Increment)
12
Kordis Media Co.,ltd
Data Sheet
The chosen OSD settings will be stored in memory. The OSD menu can be cleared from the screen from the
screen by moving the selection bar to the
icon pressing the
button otherwise it will be
automatically cleared after a few second of non-use
•
•
•
•
•
•
•
•
•
•
•
Brightness: Increase/decrease panel brightness level, total: 100 steps
Contrast: Increase/decrease panel Contrast level, total: 100 steps
H, V Position: Image H, V position control, total: 100 steps
Clock: Fine tune the number of sampled data.
Phase: Fine tune the position of sampled data (adjust image quality), total: 31 steps
Color: Color Temperature control, total: 100 steps
OSD Function: OSD position, OSD Language, OSD Off Timer control
SEL, input sign: Select input signal (Analog, Digital)
Power Switch Option: Select Power Switch on/off.
DPMS LED: IF When the DPMS select Amber LED color is Amber, otherwise LED is off.
Information: Displays current video mode and frequency
13
Kordis Media Co.,ltd
Data Sheet
Brightness Control
Menu > Brightness (Highlighted) > Select (Brightness)
Dark
Bright
14
Kordis Media Co.,ltd
Data Sheet
Contrast Control
Menu > Contrast (Highlighted) > Select
Saturated
15
Kordis Media Co.,ltd
Data Sheet
Position Control
When display image is out of screen, can adjust with this
function for getting Optimized Image)
Menu > POSITION > HORIZONTAL > select
Adjustment
When display image is out of screen, can adjust with this
function for getting Optimized Image)
VERTICAL Position
Procedure
POSITION > VERTICAL > select
16
Kordis Media Co.,ltd
Data Sheet
Image Control
POSITION > CLCOK > select
When display image is wrinkled, can adjust with this
function for getting Optimized Image)
Noisy
Optimized
POSITION > Phase select
Noisy
When display image is vague, can adjust with this
Optimized
function for getting Optimized Image)
17
Kordis Media Co.,ltd
Data Sheet
Color Control
Preset 1: Bluish white
Preset 2: Default Bluish white
User Color : RED/GREEN/BLUE Control
Menu > Color (Highlighted) > Select
Select (Highlighted) > RED Color Control (select return to Left Status)
Select (Highlighted) > GREEN Color Control
Select (Highlighted) > BLUE Color Control
18
Kordis Media Co.,ltd
Data Sheet
Language Control
19
Kordis Media Co.,ltd
Data Sheet
OSD Control
SETUP > OSD Adjust
> Horizontal Position
SETUP > OSD Adjust
> Vertical Position
SETUP > OSD Adjust
> OSD Time
20
Kordis Media Co.,ltd
Data Sheet
Miscellaneous Control
SETUP > Miscellaneous > Reset
* Restore value : Brightness, Contrast, OSD position, OSD Time, User Color, Blending
SETUP > Miscellaneous
* Transparency of OSD Background
> Blending
21
Kordis Media Co.,ltd
Data Sheet
Operation Message
Input Signal is over the supporting range
Input Signal is not present. This message is
disappeared after 5 seconds.
SELF DIAGNOSTICS
Input Signal is not present after power on
with power switch. This message is not
disappeared before
power off or activity of input signal.
AUTO CONFIGURATION
Execute AUTO Function.
22
Kordis Media Co.,ltd
Data Sheet
J9 Jumper for Panel Type.
J6
J8
J11 Jumper for LCD Power
J20
J14 Jumper for Output Power
J4
J16
J2
J15
J1
Reference
Item
Description
Type
Manufacture
J1
Connector
D-SUB Connector
D-SUB15
-
J2
Jack
DC power Input Jack
2.5Ø
-
J4
Connector
53015-1210
MOLEX
J6
Connector
LVDS Dual (LCD interface Signal)
12505WR-30
YEONHO
J8
Connector
To OSD Board
53015-0710
MOLEX
J9
Switch
Panel Type Select Switch
HDR5X2
-
J11
Jumper
LCD Power Select Jumper
3*2 Header
-
J14
Jumper
Output Power Select Jumper
3*1 Header
-
J15
Connector
Output Power Connector
53015-0310
MOLEX
J16
Connector
To Inverter Board
53261-1010
MOLEX
J20
Connector
DC power Input Connector
53015-0410
MOLEX
Analog RGB Input
Connector
23
Kordis Media Co.,ltd
Data Sheet
Pin No.
Symbol
Description
1
RED
RED analog input
2
GREEN
GREEN analog input
3
BLUE
BLUE analog input
4
GND
Ground
5
GND
Ground
6
RED GND
Ground for RED Input Signal
7
GREEN GND
Ground for GREEN Input Signal
8
BLUE GND
Ground for BLUE Input Signal
9
NC
No Connection
10
SYNC GND
Ground for HSYNC, VSNC
11
GND
Ground
12
SDA
Serial Data Line for DDC
13
HSYNC
Horizontal Sync
14
VSYNC
Vertical Sync
15
SCL
Serial Clock Line for DDC
Pin No.
Symbol
Description
1
SCL
Serial Clock Line for DDC
2
SDA
3
NC
Serial Data Line for DDC
No Connection
4
VSYNC
Vertical Sync
5
HSYNC
Horizontal Sync
6
GND
Ground for HSYNC, VSNC, SCL, SDA
7
BLUE
BLUE analog input
8
BLUE GND
Ground for BLUE Input Signal
9
GREEN
GREEN analog input
10
GREEN GND
Ground for GREEN Input Signal
11
RED
RED analog input
12
RED GND
Ground for RED Input Signal
Pin No.
Center
Symbol
Vcc
Description
12V
Pin No.
Shell
Symbol
GND
Description
Ground
24
Kordis Media Co.,ltd
Data Sheet
Pin No.
Symbol
Description
1,2
Vcc
12V
3,4
GND
Ground
Pin No.
Symbol
Description
1
Vcc
+5V
2
IRQ
3
LED2
IR(Infrared Rays) Line for Remote Control (Option)
RED LED
4
LED1
5
GND
GREEN LED
Ground
6
KEY1
Up, Power
7
KEY0
Menu, Select, Down
Pin No.
Symbol
Description
1
DIM-ADJ
Dimming adjustment analog dimming control signal
Min 3.3V, Max 0V (cross check inverter specification)
2,6
NC
No Connection
5
ON/OFF
Inverter digital ON(3.3V)/OFF(0V) signal
3,4,7,8
GND
Ground
9,10
Vcc
12V
Pin No.
Symbol
Description
1
12V
12V
2
Vcc
On board power enable
3
5V
5V
Pin No.
Symbol
Description
1
12V
12V
2,3
GND
Ground
25
Kordis Media Co.,ltd
Data Sheet
Pin No.
Symbol
Description
1
MOD_PWR
VDD For LCD Module (12V, 5V or 3.3V)
2
MOD_PWR
VDD For LCD Module (12V, 5V or 3.3V)
3
MOD_PWR
VDD For LCD Module (12V, 5V or 3.3V)
4
MOD_PWR
VDD For LCD Module (12V, 5V or 3.3V)
5
GND
Ground
6
SELLDS
LVDS DATA ORDER SELECT(Depends on Panel)/ No Connection
7
GND
Ground
8
Y3P-EVEN
Positive(+) LVDS differential first 3 data(A port)
9
Y3M-EVEN
Negative(-) LVDS differential first 3 data(A port)
10
YCP-EVEN
Positive(+) LVDS differential first Clock(A port)
11
YCM-EVEN
Negative(-) LVDS differential first Clock(A port)
12
Y2P-EVEN
Positive(+) LVDS differential first 2 data(A port)
13
Y2M-EVEN
Negative(-) LVDS differential first 2 data(A port)
14
GND
Ground
15
Y1P-EVEN
Positive(+) LVDS differential first 1 data(A port)
16
Y1M-EVEN
Negative(-) LVDS differential first 1 data(A port)
17
YOP-EVEN
Positive(+) LVDS differential first 0 data(A port)
18
Y0M-EVEN
Negative(-) LVDS differential first 0 data(A port)
19
GND
Ground
20
Y3P-ODD
Positive(+) LVDS differential second 3 data(B port)
21
Y3M-ODD
Negative(-) LVDS differential second 3 data(B port)
22
YCP-ODD
Positive(+) LVDS differential second Clock(B port)
23
YCM-ODD
Negative(-) LVDS differential second Clock(B port)
24
Y2P-ODD
Positive(+) LVDS differential second 2 data(B port)
25
Y2M-ODD
Negative(-) LVDS differential second 2 data(B port)
26
GND
Ground
27
Y1P-ODD
Positive(+) LVDS differential second 1 data(B port)
28
Y1M-ODD
Negative(-) LVDS differential second 1 data(B port)
29
YOP-ODD
Positive(+) LVDS differential second 0 data(B port)
30
Y0M-ODD
Negative(-) LVDS differential second 0 data(B port)
26
Kordis Media Co.,ltd
Data Sheet
Pin No / Symbol
Description
OFF
ON
1
XGA/SXGA
XGA
SXGA
2
VGA/SVGA
VGA
SVGA
3
NOR/SFT
NORMAL
SIFT
4
8BIT/6BIT
8BIT
6BIT
5
DUAL/SINGLE
DUAL
SINGLE
Pin No.
Symbol
Description
1
5.0V
+5.0V for LCD Module
2
3.3V
+3.3V for LCD Module
3
12V
+12.0V for LCD Module
4,5,6
VDD
LCD Module Power
27
Kordis Media Co.,ltd
Data Sheet
Reference
Description
J14
On board +12V logic power
enable
Connector Type
12V
5V
On board +5V logic power
enable
12V
J11
5V
5V panel power
: Incorrect setting can
damage panel
5V
3.3V
12V
3.3V panel power
: Incorrect setting can
damage panel
5V
3.3V
12V
123V panel power
: Incorrect setting can
damage panel
5V
3.3V
12V
28
Kordis Media Co.,ltd
Data Sheet
93.325
79.475
5
C105
30
R8
R47
R48
C45
C87
R46
J5
R17
R77
C97 5
R37
R35
C77
C71
20
C93
R80
R76
10
C44
C43
BA3
BA5
C243
C241
C253
C239
R24
C73
C254
R105
R84
C22
C133
R116
C13
C11
C17
D38
D30
U8
D31
R34
C8
C25
C30
R31
D3
D2
J2
J22
J21
D26
R13
D24
R38
R15
5
C24
R5
C74
U16
U9
J20
C28
D41
J11
C90
C46
R36
D27
C64
J1
R146
D29
J14
C67
C10
C48
R39
D33
C94
C37
D34
D37
C68
D39
R227
R228
R225
R226
R224
R223
R33
R64
R32
R70
R14
R71
R147
C51
12V
R93
R72
C91
C290
C285
C286
R153
C88
J7
C263
C269
C237
C287
C240
C55
C65
R62
R59
R40
R58
R30
D36
C210
C281
C204
C282
D35
R29
5V
C277
C82
C85
D40
C79
C92
C76
D25
R11
C211
C280
C70
3.3V
5V 3.3V
R60
D28
5V
MODPWR
1
U1
R20
C18
C19
U6
C61
L2
C59
C202
C292
C291
C52
C20
C27
C38
X201
C53
ZD1
R42
R68
R67
C247
R69
J6
U3
C39
12V
C56
R12
C128 C265
C201
84
C288
C78
C102
C60
C284
U17
C58
C31
C242
C16
C15
R92
C264
R26
C244
R28
C63
C62
C26
C245
C248
U10
C104
R23
R123
C7
C81
100
R79
C50
C49
C12
C29
J16
R7
Q2
R65
R19
R66
C234
C5
U18
C14
15.075
R104
R106
R22
R82
R108
C246
R18
C54
C217
C40
R94
R95
R96
R97
R98
R99
R100
R101
R102
R103
C4
C47
C36
J15
U4
C23
X1
U19
12V
C69
BA202
BA1
C80
R25
C75
C72
C3
R1
C95
C89
C9
U13
L17
31.425
BA204
L3
C6
C35
BA6
R21
BA206
U2
R73
R27
C83
R74
R75
R41
BA4
BA2
C2
R49
U12
R6
R4
R3
R2
BA201
C66
R112
U14
15
BA203
R86
R87
R88
R89
R90
R91
U5
C41
C86
R9
BA205
C34
C1
R78
C32
C84
R10
R61
R57
R63
R56
R55
C33
R107
92.925
R43
25
R81
C21
R83
R85
J3
40
C103
ON ON ON ON ON
1 2 3 4 5
51.675
J8
J9
C99
R16
48.375
35
C57
19.625
U11
D1
U7
C42
MODEL:NCB200E
DATE:2003.03.26
P/NO:NOM-NSIND-200AA
J10
C96
R45
R44
R50
R52
R51
R54
R53
R110
C101
J4
5
U15
1
5
SINGLE
DUAL
C100
6BIT
8BIT
C98
SXGA SVGA SFT
XGA VGA NOR
R109
ON
OFF
5
5
5
5
18.7
44.335
75.065
116.005
140.995
152.5
14.64mm
1.6T
Max 3mm
29
Kordis Media Co.,ltd
Data Sheet
Firstly setup the controller/display system with the buttons. With the attached controllers and
display system active make any settings for color, contrast and image position as required.
Remove the control switches, the 7-way (J2) cable.
Refer to inverter specifications for details as to fixing brightness to a desired level, this may
require a resistor, an open circuit or closed circuit depending on inverter
There are 3 potential issues to consider with inverter connection:
Power
ON/OFF
Brightness (DIM-ADJ)
This should be matched with the inverter specification.
This is a pin provided on some inverter for ON/OFF function and is used by this panel
controller for VESA DPMS compliance. If the inverter does not have on/off pin or the on/off pin is not
used DPMS will not operate. Pin 5 should be matched to the inverter specification for the ON/OFF pin.
NCB200 controller boards are analog dimming control method. And it is
important to consider the specifications for the inverter to be used.
30
Kordis Media Co.,ltd
Data Sheet
A general guide to troubleshooting of a flat panel display system it worth considering the system as
separate elements, such as:
Controller (jumpers, PC settings)
Panel (controller, cabling, connection, panel, PC settings)
Backlight (inverter, cabling, connection, panel, Pc settings)
Cabling
Computer system (display settings, operating system)
Through checking the system step by step cross with instruction manuals and a process of elimination to
isolate the problem it is usually possible to clearly identify the problem area.
If the panel backlight is not working it may still be possible to see just some image.
A lack of image is most likely to be caused by incorrect connection, lack of power, failure to provide a
signal or incorrect graphic card settings.
If it is impossible to position the image correctly, ie the image adjustment controls will not move the image
far enough, then test using another graphics card. This situation can occur when a graphic card is not close
to standard timing or when something is in the graphics line that may affect the signal such as a signal
splitter (please note that normally a signal splitter will not have any adverse effect).
A faulty panel can have blank lines, failed sections, flickering or flashing display.
Incorrect graphic card refresh rate, resolution or interlaced mode will probably cause the image to be
the wrong size, to scroll to, flicker badly or possibly even no image.
Incorrect jumper settings on the controller may cause everything from incorrect image viewing to total
failure.
Do not set the panel power input incorrectly.
Sparkling on the display: faulty panel signal cable.
Items to check include: Power input, controls, inverter and Tubes generally in this order.
If half the screen is dimmer than the other half:
Check cabling for the inverter.
Also:
If system does not power down when there is a loss of signal.
31
Kordis Media Co.,ltd
Data Sheet
The microprocessor measures the, H – sync V – sync and polarity for RGB Inputs, and uses this timing
information to control all of the display operation to get the proper image on a screen. This board can
detect all VESA standard Graphic modes shown on the table below and Provide mare clear and stable image
on a screen
Spec
Pixel
Freq.
Mode
Horizontal Timing
Sync
Freq.
Total
Vertical Timing
Active
Polar
MHz
Sync
Freq.
Total
Active
Hz
Line
Lind
Polar
KHz
Pixel
Pixel
640*350@70Hz
25.144
P
31.430
800
640
N
70.000
449
350
640*400@70Hz
28.287
N
31.430
800
640
P
70.000
449
400
720*400@ 70Hz
28.287
N
31.430
900
720
P
70.000
449
400
640*480@60Hz
28.175
N
31.469
800
640
N
59.940
525
480
640*480@72Hz
31.500
N
37.861
832
640
N
72.809
520
480
640*480@75Hz
31.500
N
37.500
840
640
N
75.000
500
480
800*600@56Hz
36.000
P
35.156
1024
800
P
56.250
625
600
800*600@60Hz
40.000
P
37.879
1056
800
P
60.317
628
600
800*600@72Hz
50.000
P
48.077
1040
800
P
72.188
666
600
800*600@75Hz
49.500
P
46.875
1056
800
P
75.000
625
600
1024*768@60Hz
65.000
N
48.363
1344
1024
N
60.005
806
768
1024*768@70Hz
75.000
N
56.476
1328
1024
P
70.070
806
768
1024*768@75Hz
78.750
P
60.023
1312
1024
P
75.030
800
768
1280*1024@60Hz
108.000
P
63.981
1688
1280
P
60.020
1066
1024
1280*1024@75Hz
135.000
P
79.976
1688
1280
P
75.035
1066
1024
This board requires several accessories to build a complete display unit.
accessory for this board as below.
can provide standard
No.
Items
Part No.
Ex) LG. Philips LB064V2
1
LCD signal cable
SC-Panel Part No.-mm
SC-LB064V2-20
2
Inverter
Part no. of Manufacturer
GH006
3
Inverter cable
IC-Panel Part No.-mm
IC-GH006-20
4
OSD Board
NLX05-OSD
NLX05-OSD
5
OSD Cable
OC-NID01-mm
OC-NID01-20
: LCD Signal Cable
: Inverter Interface cable
: OSD Board cable
32
Kordis Media Co.,ltd
Data Sheet
This board can support various LCD panels, which have VGA, SVGA, XGA and SXGA resolution.
The table below shows the model names of LCD panel, Jumper setting for LCD power, LCD panel selection
and the dedicated inverter for each LCD panel. All of the LCD Panels listed can work without changing the
control program of the NCB100 board. And SUCH will try continuously to the model names of the LCD panels
that have been tested.
No.
LCD Model Name
LCD vendor
LCD VCC
HYDIS
+5.0V
SAMSUNG
Option
SW1
SW2
SW3
SW4
SW5
ED8N
ON
ON
OFF
OFF
OFF
+5.0V
ED8N
ON
ON
OFF
OFF
OFF
(note1)
1
HT17E11
2
LTM17EH-L01
3
LM170E01
LG Philips LCD
+5.0V
ED8N
ON
ON
OFF
OFF
OFF
4
LM181E1, 05, 06
LG Philips LCD
+12.0V
ED8N
ON
ON
OFF
OFF
OFF
5
HT18E22
HYDIS
+3.3V
ED8S
ON
ON
ON
OFF
OFF
6
LTM190E1
SAMSUNG
+5.0V
ED8N
ON
ON
OFF
OFF
OFF
7
LM190E-C4
LG Philips LCD
+12.0V
ED8N
ON
ON
OFF
OFF
OFF
8
FLC48SXC8V-10
Fujitsu
+5.0V
ED8N
ON
ON
OFF
OFF
OFF
Note1 : Abbreviated word :
V/S/X
6/8
E S 6 S
: V VGA, S SVGA, X XGA, E SXGA
: 6 6BITS 8 8BITS
S/D
: SINGLE PORT, D DUAL PORT
S/N
: (SFT) SHIFT, N(NOR) NORMAL
33
Kordis Media Co.,ltd