Samsung PS64D8005 User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA
BELGIUM
CZECH
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
TURKEY
U.K
EIRE
SWITZERLAND
LITHUANIA
LATVIA
ESTONIA
Customer Care Centre
0810 - SAMSUNG (7267864, € 0.07/min)
02-201-24-18
Web Site
www.samsung.com/at
www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
800 - SAMSUNG (800-726786)
www.samsung.com/cz
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
70 70 19 70
www.samsung.com/dk
030 - 6227 515
www.samsung.com/fi
01 48 63 00 00
www.samsung.com/fr
01805 - SAMSUNG (726-7864 € 0,14/Min)
www.samsung.de
06-80-SAMSUNG (726-7864)
www.samsung.com/hu
800-SAMSUNG (726-7864)
www.samsung.com/it
261 03 710
www.samsung.com/lu
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
www.samsung.com/nl
815-56 480
www.samsung.com/no
0 801 1SAMSUNG (172678)
www.samsung.com/pl
022-607-93-33
80820-SAMSUNG (726-7864)
www.samsung.com/pt
0800-SAMSUNG (726-7864)
www.samsung.com/sk
902 - 1 - SAMSUNG (902 172 678)
www.samsung.com/es
0771 726 7864 (SAMSUNG)
www.samsung.com/se
444 77 11
www.samsung.com/tr
0845 SAMSUNG (7267864)
www.samsung.com/uk
0818 717100
www.samsung.com/ie
0848 - SAMSUNG (7267864, CHF 0.08/min)
www.samsung.com/ch
www.samsung.com/ch_fr/(French)
8-800-77777
www.samsung.com/lt
8000-7267
www.samsung.com/lv
800-7267
www.samsung.com/ee
Plasma TV
user manual
E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
© 2011 Samsung Electronics Co., Ltd. All rights reserved.
[PD8000-XE]BN68-03451E-00L05.indb 1
BN68-03451E-00
2011-03-08 오후 4:13:22
For more information on how to use e-Manual (p. 14)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Digital TV notice
1.
2.
3.
4.
5.
6.
Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.
DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so
on, are not included in this specification. So, they cannot be workable at this moment.
Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
For more information, please contact your local Samsung customer care centre.
✎✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or
not.
User Instructions
• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
• The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
• Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to
the screen.
Damages caused by the above effect are not covered by the Warranty.
• After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment. To protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
English - 2
[PD8000-XE]BN68-03451E-00L05.indb 2
2011-03-08 오후 4:13:22
Accessories
✎✎Please make sure the following items are included with your TV. If any items are missing, contact your
dealer.
✎✎The items’ colours and shapes may vary depending on the models.
✎✎Cables not included in the package contents can be purchased separately.
✎✎Check that there is no accessory hidden behind packing materials when you open the box.
[[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
•• Remote Control & Batteries (AAA x 2)
•• Owner’s Instructions
•• Cleaning Cloth
•• Warranty Card (Not available in some locations) / Safety Guide
CI Card Adapter
Scart Adapter (2 EA)
Ferrite Core (2EA)
Ferrite Core (1EA)
AV/Component Adapter
✎✎Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from
interference. When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the figure.
xx A Maximum distance between the ferrite core and the end of the cord inserted in
B
A
the TV: 6~8 inches
xx B Maximum distance between the ferrite core and the other end of the cord
inserted in the AC outlet: 3/4 inch
Power Cord
✎✎Ferrite Core : The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near
the plug as shown in the figure.
Antenna Cable/
Component Cable
(sold separately)
•• An administration fee may be charged if either
–– (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
–– (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
English - 3
[PD8000-XE]BN68-03451E-00L05.indb 3
2011-03-08 오후 4:13:23
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Control Panel
Remote control sensor
Aim the remote control towards this spot on the TV.
Power Indicator
Blinks and turns off when the power is on and lights up in standby mode.
SOURCEE
Toggles between all the available input sources. In the on-screen menu, use
this button as you would use the ENTERE button on the remote control.
MENU
Displays an on-screen menu, the OSD (on screen display) of your TV’s
features.
y
Adjusts the volume. In the OSD, use the y buttons as you would use
the ◄ and ► buttons on the remote control.
z
Changes the channels. In the OSD, use the z buttons as you
would use the ▼ and ▲ buttons on the remote control.
P (Power)
Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).
A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug
the power cord.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of
the product.
✎✎When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury
due to the product falling.
✎✎The appearance may differ depending on the product.
✎✎Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
English - 4
[PD8000-XE]BN68-03451E-00L05.indb 4
2011-03-08 오후 4:13:23
Viewing the Remote Control
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power,
Channel and Volume buttons.
ON/OFF
POWER
Turns the TV on and off.
Turns the remote control light on or off.
When on, the buttons become illuminated
for a moment when pressed. (Using the
remote control with this button set to On
will reduce the battery usage time.)
SOURCE
Displays and selects the available video
sources.
Have direct access to channels.
Alternately select Teletext ON, Double,
Mix or OFF.
PRE-CH
TTX/MIX
Cuts off the sound temporarily.
MUTE
Adjusts the volume.
Changes channels.
CH LIST
Opens the OSD.
Displays channel lists on the screen.
Displays the EPG (Electronic Programme
Guide).
Link to various application services.
Displays information on the TV screen.
Quickly select frequently used functions.
OFN (Optical Finger Navigation) Sensor
can be used as a pointer only in Web
Browser application.
If you don’t press any buttons within
30 seconds, the sensor will turn off
automatically. To wake up the sensor,
press ENTER, Navigation, Colour, REW,
FF, Return buttons.
While you use this sensor, the backlight
will not be operated.
Exits the menu.
Selects the on-screen menu items and
changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the Channel
Manager, SMART HUB menu, etc.
Returns to the previous channel.
TV
SOCIAL
E-MANUAL
P.SIZE
AD/SUBT.
Use these buttons in SMART HUB and
Anynet+ modes.
SOCIAL TV: Displays the Social TV
screen.
SEARCH: Support to recommendation
search word and search function.
W: Sets the video, which provided with
3D signal.
E-MANUAL: Displays the e-Manual.
P.SIZE: Selects the Picture size.
AD/SUBT.: Turns the audio description on
and off (not available in some locations). /
Displays digital subtitles.
Installing batteries (Battery size: AAA)
English - 5
[PD8000-XE]BN68-03451E-00L05.indb 5
2011-03-08 오후 4:13:24
✎✎When connecting a PC to the HDMI IN 1(DVI)
Changing the Input Source
port with HDMI cable, you should set the TV to
PC mode under Edit Name.
Source
Use to select TV or an external input
sources such as a DVD / Blu-ray player
/ cable box / STB satellite receiver.
✎✎When connecting a PC to the HDMI IN 1(DVI)
port with HDMI to DVI cable, you should set the
TV to DVI PC mode under Edit Name.
SOURCE
✎✎When connecting an AV devices to the HDMI IN
■■ TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB / AllShare
1(DVI) port with HDMI to DVI cable, you should
set the TV to DVI Devices mode under Edit
Name.
✎✎In the Source, connected inputs
will be highlighted.
Edit Favourites
✎✎Ext. and PC always stay activated.
In the Source, press the TOOLS button to select Edit
Favourites. You can set an external input source to
Favourites.
Edit Name
In the Source, press the TOOLS button, and then you
can set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC /
DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD
DVD / DMA: Name the device connected to the
input jacks to make your input source selection
easier.
Information
You can see detailed information about the selected
external device.
Refresh
In the Source, If the external devices is not displayed,
press the TOOLS button to select Refresh. Searching
for connected devices.
✎✎For best cable connection to this product, be sure to use cables with a maximum thickness as below:
•• Maximum thickness - 0.55 inches (14mm)
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the mains and antenna.
✎✎The PDP device may interfere with an amateur radio or AM radio.
✎✎When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this
may cause the TV to malfunction.
Cable Satellite VHF/UHF Antenna
ANT 2 IN
(SATELLITE)
ANT 1 IN
or
English - 6
[PD8000-XE]BN68-03451E-00L05.indb 6
2011-03-08 오후 4:13:24
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWERP button. Plug & Play is available only when the Source is set to TV.
✎✎Before turning on the TV, make sure the antenna cable is connected (p. 6).
1
2
Selecting the OSD
Language
3
Software Upgrade
4
Selecting the usage
mode
✎✎This may take some time, depending on network status.
Press the ▲ or ▼ button to select Home Use, and then press the ENTERE
button twice.
5
Select Country
(Depending on the
country)
✎✎After selecting the country in the Country menu, some models may
Setting up the
Network
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Set up your network connection. Press the ENTERE button to start. If you do
not know your network set up information or want to set to it later, select Skip.
We suggest you skip network connection setup now and refer to “Network
menu” in the e-Manual for set up requirements and instructions, and the
Network Connection section of this manual (p. 13).
You can set up the network connection later using the Network menu.
Select Next to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the Skip. For
more information, refer to “Software Upgrade” (Preference Features → Support
Menu) in the e-Manual.
✎✎Select the Home Use mode. Store Demo mode is for retail environments.
Press the ▲ or ▼ button, then press the ENTERE button. Select the
appropriate country.
proceed with an additional option to setup the pin number.
6
Setting the Clock
Mode
7
Selecting search
options for auto
tuning
✎✎When you input the PIN number, 0-0-0-0 is not available.
Set the Clock Mode automatically or manually.
Auto: Select the time zone where you are located.
Manual: Allows you to manually set the current date and time.
Press the ▲ or ▼ button, then press the ENTERE button. Select the channel
source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel → Auto Tuning.
✎✎When Air or Cable is selected first: After all Air or Cable channels are
stored, the step for storing Satellite channels is displayed.
✎✎When Satellite is selected first: After all Satellite channels are stored, the
step for storing Air or Cable channels is displayed.
✎✎Press the ENTERE button at any time to interrupt the memorisation
8
Enjoy your TV.
process.
If you want to watch a broadcast Programme, select Close. If you want to enjoy
the Smart Hub, select the Smart Hub. The Smart Hub will start. For more
detailed information, refer to “Smart Hub” in the e-Manual.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (Menu → System) again at home although you did in shop.
✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
English - 7
[PD8000-XE]BN68-03451E-00L05.indb 7
2011-03-08 오후 4:13:24
Connecting to AV devices
devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite
¦¦ Available
receiver, VCR, Digital Audio System, Amplifier, DVD home Theatre, PC
HDMI connection
HDMI OUT
HDMI to DVI connection
(ARC)
(DVI)
DVI OUT
AUDIO OUT
R-AUDIO-L
Using an HDMI or an HDMI to DVI connection cable (up to 1080p)
✎✎HDMI IN 1(DVI), 2(ARC), 3, 4 / PC/DVI AUDIO IN
xx For better picture and audio quality, connect to a digital device using an HDMI cable.
xx An HDMI cable supports digital video and audio signals, and does not require an audio cable.
–– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and
audio cables.
xx The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
xx Be sure to use an HDMI cable with a thickness of 14 mm or less.
xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
xx A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support
the ethernet function via HDMI.
xx This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note
that the ARC function is supported by the HDMI IN 2(ARC) port only.
–– If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this case,
set 3D Auto View or 3D Mode to Off.
xx The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only
when the TV is connected with an audio receiver that supports the ARC function.
English - 8
[PD8000-XE]BN68-03451E-00L05.indb 8
2011-03-08 오후 4:13:25
ANT 1 IN
Component connection
G
G
ANT 2 IN
(SATELLITE)
B
B
COMPONENT OUT
PB
Y
R
R
PR
R
R
W
W
AUDIO OUT
R-AUDIO-L
AV connection
R
R-AUDIO-L
Y
Y
R
SCART connection
W
W
AUDIO OUT
VIDEO OUT
EXT
Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable
✎✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
✎✎When connecting to AV IN, connect the AV connector(yellow) to the TV jack(Green).
✎✎To obtain the best picture quality, the Component connection is recommended over the A/V
connection.
English - 9
[PD8000-XE]BN68-03451E-00L05.indb 9
2011-03-08 오후 4:13:25
Connecting to a PC and Audio device
¦¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
✎✎Connecting through the HDMI cable may not be supported depending on the PC.
PC connection
HDMI OUT
(ARC)
DVI OUT
(DVI)
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and an HDMI to DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA DMT /
DTV CEA
1920 x 1080p
67.500
60.000
148.500
+/+
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English - 10
[PD8000-XE]BN68-03451E-00L05.indb 10
2011-03-08 오후 4:13:26
¦¦ Available devices: digital audio system, amplifier, DVD home theatre
DVD home theatre connection
OPTICAL
Headphones connection
Using an Optical (Digital) or a Headphone Connection
✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the
volume of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-TopBox) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎✎Headphones H: You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV.
xx Headphone volume and TV volume are adjusted separately.
English - 11
[PD8000-XE]BN68-03451E-00L05.indb 11
2011-03-08 오후 4:13:26
Connecting to a COMMON INTERFACE slot
Attaching the CI Card Adapter
Attach the adapter as shown below.
To connect the CI CARD Adapter, follow these steps.
✎✎We recommend attaching the adapter before installing
the wall mount, or inserting the “CI or CI+ CARD”.
1. Insert the CI CARD Adapter into the two holes on the
product 1.
TV Rear
✎✎Please find a two holes on the rear of the TV. A two
holes is beside the COMMON INTERFACE port.
2. Connect the CI CARD Adapter into the COMMON
INTERFACE port on the product 2.
3. Insert the “CI or CI+ CARD”.
We recommand that you insert the CI card before you mount the TV on a wall.
It may be difficult to insert after the mounting.
Insert the card after attaching the CI-Adapter on TV.
It is difficult to attach the module if you insert the card before attaching.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
•• If you don’t insert the “CI or CI+ CARD”, some channels will display
the message “Scrambled Signal”.
•• The pairing information containing a telephone number, the “CI or CI+
CARD” ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.
•• When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the channel
list is updated.
✎✎NOTE
xx You must obtain a “CI or CI+ CARD” from a local cable service provider.
xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+
CARD” may cause damage to it.
xx Insert the “CI or CI+ CARD” in the direction marked on the card.
xx The location of the COMMON INTERFACE slot may be different depending on the model.
xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
xx If you have any problems, please contact a service provider.
xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or
will not be seen.
English - 12
[PD8000-XE]BN68-03451E-00L05.indb 12
2011-03-08 오후 4:13:27
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or
wireless connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem.
TV
Wireless IP sharer
(Router having DHCP server)
The LAN Port on
the Wall
LAN Cable
Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung
recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may
not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network
through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code
called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with
new Wi-Fi certification specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup.
They are illustrated below:
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
TV Rear Panel
LAN Cable
The LAN Port on the Wall
TV Rear Panel
LAN Cable
✎✎It is not supported when the network speed is under 10 Mbps.
✎✎Use Cat 5 cable for the connection.
English - 13
[PD8000-XE]BN68-03451E-00L05.indb 13
2011-03-08 오후 4:13:28
How to view the e-Manual
You can read the introduction and instructions about the TV features stored
in your TV.
E-MANUAL
O MENUm → Support → e-Manual → ENTERE
✎ If you want to return to e-Manual, press E-MANUAL button on remote.
✎ You can’t use the Try Now function, if the menu is not activated.
Screen Display
TV Screen: Displays the current input
source screen.
Change the category. Press l or r
button to select category you want.
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Displays the sub-menu list. Press
ENTERE button to select submenu you want.
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
Help: Displays the e-Manual Guide
or Product guide. Press ENTERE
button.
Help
Index
Index: Displays index screen.
X: Exit the e-Manual.
Using the Help
Display the e-Manual Guide & the Product Guide by pressing Help.
‰ How to view the e-Manual
You can read the introduction and instructions about
the TV features stored in your TV.
Sync media from multiple devices with AllShare
Basic Features
O MENUm → Support → e-Manual → ENTERE
AllShare™ syncs your digital devices so you can
enjoy music, movies and photos from your PC,
camera and mobile devices, on your larger TV
screen. Connects you to multiple PCs, as well.
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
Help
Index
Return
Return
<E-manual Guide>
The e-Manual guide appears as above.
<Product Guide>
The product guide appears as above.
How to toggle between the e-Manual and the corresponding menu(s).
Basic Features > Changing the Preset Picture Mode (5/10)
Picture
‰ Changing the Preset Picture Mode
■
Picture Mode t
Select your preferred picture type.
N When an input source is set to PC, the Picture Mode is only available the
Standard and Entertain.
Try Now
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural
for LED TV
/ Relax
for PDP TV :
Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
E-MANUAL
• Entertain (In PC mode only): Suitable for watching movies and games.
Picture Mode
Standard
Backlight
14
Contrast
100
Brightness
45
Sharpness
50
Colour
Help
Try Now
Home
Zoom
Index
Tint (G/R)
50
G 50
R 50
✎ This function is not enabled in some menus.
English - 14
[PD8000-XE]BN68-03451E-00L05.indb 14
2011-03-08 오후 4:13:32
Method 1
Method 2
1. Press the ENTERE button when selecting
Contents Area. The “Are you sure?” is displayed.
Select Yes and then press the ENTERE
button. The OSD window will be displayed.
1. Select Try Now, if you want to execute the
corresponding menu(s).
2. To return to the e-Manual screen, press the
E-MANUAL button.
2. To return to the e-Manual screen, press the
E-MANUAL button.
Viewing the Contents
Basic Features > Changing the Preset Picture Mode (5/10)
‰‰ Changing the Preset Picture Mode
Contents Area: You can view the corresponding
contents, if you selected a sub-menu. To move
previous or next page, press the l or r button.
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When an input source is set to PC, the Picture Mode is only available
the Standard and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain(In PC mode only): Suitable for watching movies and games.
Help
Try Now
Home
Zoom
Index
Try Now: Displays the corresponding menu(s).
Home: Moves to the e-Manual home screen.
Zoom: Magnifies a screen.
Index: Displays index screen.
Using the Zoom mode
When you view the e-Manual instruction, select the
Zoom to magnify the screen. You can scroll through
the magnified screen by using the u or d buttons.
✎✎To return to the previous screen, press the
‰‰ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When an input source is set to PC, the Picture Mode is only available the Standard
and Entertain.
RETURN button.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural
for LED TV
/ Relax
for PDP TV :
Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
Return
How to search a keyword by using index page
✎✎This function may not supported depending on the language.
1. If you want to search a keyword, press the u / d / l / r button to select Index.
2. Press the l or r button to select a character order you want, and then press the ENTERE button.
3. Press the u or d button to select a keyword you want to see, and then press the ENTERE button.
4. You can view the corresponding e-Manual instruction screen.
✎✎To close the Index screen, press the RETURN button.
English - 15
[PD8000-XE]BN68-03451E-00L05.indb 15
2011-03-08 오후 4:13:33
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect
to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials,
please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal
injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly
are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard
screw specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
xx Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
xx Our 55” model do not comply with VESA Specifications. Therefore, you should use our dedicated wall
mount kit for this model.
xx Do not mount the TV at more than a 15 degree tilt.
Product Family
PDP-TV
[Ultra-Slim]
inches
VESA Spec. (A * B)
51
400 X 400
59~64
600 X 400
Standard Screw
Quantity
M8
4
✎✎Unscrew the hole around before installing Wall-Mount on the wall.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury
due to electric shock.
English - 16
[PD8000-XE]BN68-03451E-00L05.indb 16
2011-03-08 오후 4:13:33
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure
that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions provided in the included Safety
Flyer. For added stability and safety, install the anti-fall device as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎You may need additional material such as an anchor depending on
the type of wall.
✎✎Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎✎Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
✎✎Screw Specifications
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
Wall
✎✎NOTE
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
clamps fixed on the TV.
xx Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If
you have any doubt about the security of your connections, contact a professional installer.
Storage and Maintenance
✎✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please
clean it to watch TV.
Do not spray water or a cleaning agent directly onto
Clean the product with a soft cloth dapped in a small
the product. Any liquid that goes into the product may amount of water.
cause a failure, fire, or electric shock.
English - 17
[PD8000-XE]BN68-03451E-00L05.indb 17
2011-03-08 오후 4:13:34
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please
visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this
manual.
Issues
Solutions and Explanations
The TV won’t turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “Remote control does not work” below.
There is no picture/video.
• Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for
the SAMSUNG TV code.
✎✎Some of above pictures and functions are available at specific models only.
✎✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com →
Support → Downloads) by USB.
Licence
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be
viewed without a cable box / STB (Set-Top-Box) satellite receiver.
3D
This exciting new feature enables you to view 3D content.
SMART HUB
The Gateway to all content integrated in one place
•• It’s all integrated to guide you to easier and diverse entertainment choices
•• Control your entertainment life with easy and simple user friendly UI
•• Access to diverse Apps that are adding up every day
•• Customize your TV, by App grouping & sorting to your taste
AllShare™
AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.
Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.
Skype
With Skype you can say hello or share a laugh with anyone, anywhere. Communicate with people around the
world!
English - 18
[PD8000-XE]BN68-03451E-00L05.indb 18
2011-03-08 오후 4:13:34
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
TV System
Colour/Video System
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Analogue: B/G, D/K, L, I (Depending on your country selection)
Digital: DVB-T2/DVB-C/DVB-S2
Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Sound System
HDMI IN
BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.
Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Model Name
PS51D8005
PS64D8005
Screen Size
51 inches
64 inches
Sound
(Output)
10 W X 2
15 W X 2
1195.9 X 37.2 X 719.4 mm
1195.9 X 309.5 X 802.0 mm
1487.9 X 37.1 X 888.9 mm
1487.9 X 351.6 X 979.2 mm
22.4 kg
24.8 kg
35.0 kg
38.3 kg
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
✎✎Design and specifications are subject to change without prior notice.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the
product.
✎✎Hereby, Samsung, declares that this PDP TV is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
English - 19
[PD8000-XE]BN68-03451E-00L05.indb 19
2011-03-08 오후 4:13:34