Yamaha R-S700 Owner`s manual

U
Receiver
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1
2
3
4
5
6
7
8
9
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain
this Owner’s Manual in a safe place for future reference.
10
11
12
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
i En
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC,
to use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by using
one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Electronics Corp., USA 6660 Orangethorpe
Ave., Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
ii En
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry,
clean place - away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold. For proper
ventilation, allow the following minimum clearances
around this unit.
Top: 30 cm (11-3/4 in)
Rear: 20 cm (7-7/8 in)
Sides: 20 cm (7-7/8 in)
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes
from cold to hot, and do not locate this unit in an
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit,
which may cause an electrical shock, fire, damage to this
unit, and/or personal injury.
Avoid installing this unit where foreign object may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do not
place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage
other than specified.
To prevent damage by lightning, keep the power cable
and outdoor antennas disconnected from a wall outlet or
this unit during a lightning storm.
Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reasons.
When not planning to use this unit for long periods of
time (i.e. vacation), disconnect the AC power plug from
the wall outlet.
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit
is faulty.
iii En
17 Before moving this unit, press A to set this unit to the
standby mode, and disconnect the AC power plug from
the wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the power off, then leave this unit
alone for cooling.
20 Install this unit near the AC outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
22 Excessive sound pressure from earphones and
headphones can cause hearing loss.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you set this unit to
standby mode by A. In this state, this unit is designed to consume a
very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
This label is required to be attached to a product of which
the temperature of the top cover may be hot during
operation.
CONTENTS
ADVANCED OPERATION
SETTING THE OPTION MENU
FOR EACH INPUT SOURCE.........................40
Front panel ................................................................. 4
Front panel display .................................................... 6
Rear panel .................................................................. 7
Remote control........................................................... 8
Zone 2 remote control (R-S700 only)...................... 10
Using the remote controls........................................ 11
ADVANCED SETUP ............................................43
PREPARATION
CONNECTIONS .................................................. 12
Connecting speakers and source components.......... 12
Connecting the FM and AM antennas ..................... 14
Using COUPLER jacks (R-S700 only) ................... 15
Connecting power cable .......................................... 15
Option menu items................................................... 40
Changing the ADVANCED SETUP
menu parameters.................................................. 43
Switching the remote control ID ............................. 44
ZONE 2 ..................................................................45
Connecting Zone 2 components .............................. 45
Controlling Zone 2................................................... 46
REMOTE CONTROL FEATURES ...................47
Controlling this unit, a TV, or other components.... 47
Configuring the remote control ............................... 49
PREPARATION
USEFUL FEATURES ............................................ 2
SUPPLIED ACCESSORIES ................................. 3
CONTROLS AND FUNCTIONS ......................... 4
INTRODUCTION
INTRODUCTION
ADDITIONAL INFORMATION
BASIC OPERATION
PLAYING AND RECORDING .......................... 16
Playing a source....................................................... 16
Adjusting the tonal quality....................................... 17
Recording a source .................................................. 19
Using the sleep timer ............................................... 19
BASIC
OPERATION
TROUBLESHOOTING .......................................50
SPECIFICATIONS...............................................57
FM/AM TUNING ................................................. 20
ADVANCED
OPERATION
Automatic tuning ..................................................... 20
Manual tuning.......................................................... 21
Automatic station preset (FM stations only) ........... 22
Manual station preset............................................... 23
Recalling a preset station ......................................... 24
Clearing a preset station........................................... 24
Clearing all preset stations....................................... 25
LISTENING TO SIRIUS Satellite Radio™....... 26
ADDITIONAL
INFORMATION
Connecting the SiriusConnect™ tuner .................... 27
Activating SIRIUS Satellite Radio™
subscription ......................................................... 27
SIRIUS Satellite Radio™ operations ...................... 28
Registering and recalling SIRIUS
Satellite Radio™ channels .................................. 30
Setting the Parental Lock......................................... 32
Displaying the SIRIUS Satellite Radio™
information .......................................................... 34
PLAYING BACK TUNES
FROM YOUR iPhone/iPod/
Bluetooth™ COMPONENT ............................ 35
Using a Universal Dock for iPod............................. 36
Using a Wireless System for iPod ........................... 37
Using a Bluetooth Wireless Audio Receiver ........... 38
1 En
USEFUL FEATURES
USEFUL FEATURES
This unit allows you to:
Improve sound quality by using the CD Direct Amp*1 and Pure
Direct functions
➡ p. 17
Play back music from your iPhone/iPod*2 or Bluetooth
component*2
➡ p. 35
Play back video content from your iPhone/iPod*1 *2
➡ p. 36
Listen to SIRIUS Satellite Radio channels*3
➡ p. 26
Listen to FM and AM radio stations
➡ p. 20
Boost bass sounds by connecting a subwoofer
➡ p. 12
Connect an external device*1 such as a graphic equalizer or a
surround-sound processor
➡ p. 15
Use this unit’s remote control to operate other components such
as a CD player, BD/DVD player or TV
➡ p. 47
Save power by using the automatic power down function
➡ p. 43
Use this unit to listen to another input source in two different
rooms
➡ p. 45
*1
R-S700 only
Optional Yamaha product required
*3 Optional SiriusConnect tuner required
*2
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights
reserved. Service not available in Alaska and Hawaii.
iPhone, iPod
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.
• y indicates a tip for your operation.
• This manual is the owner’s manual for both the R-S700 and the R-S500. Model names are given where the details of functions are
unique to each model. Generally, illustrations of the R-S700 are used for explanations.
• Some operations can be performed by using either the buttons on the front panel of this unit or those on the remote controls. In case
the button names differ between this unit and the remote controls, the names of the buttons on the remote controls are given in
parentheses.
• In case the buttons on the remote control and the Zone 2 remote control have certain functions in common, the illustrations of the
buttons on the remote control are used for explanation throughout the manual.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
2 En
SUPPLIED ACCESSORIES
SUPPLIED ACCESSORIES
Remote control
■
•
•
•
•
•
•
•
•
•
•
•
•
•
Zone 2 remote control
(R-S700 only)
Power cable
(R-S700 only)
AM loop antenna
Indoor FM antenna
Batteries (x2)
(AAA, R03, UM-4)
INTRODUCTION
Please check that you received all of the following parts.
Notes on remote controls and batteries
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places
Use AAA, R03, UM-4 batteries for the remote control.
Use a CR2025 battery for the Zone 2 remote control (R-S700 only).
Insert batteries according to the polarity markings (+ and -).
Change all batteries if you notice the operation range of the remote control narrows.
If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked material. If the leaked material
comes into contact with your skin or gets into your eyes or mouth, rinse it away immediately and consult a doctor. Clean the battery
compartment thoroughly before installing new batteries.
Do not use old batteries together with new ones. This may shorten the life of the new batteries or cause old batteries to leak.
Do not use different types of batteries (such as alkaline and manganese batteries) together. Batteries that look the same may have a
different specification.
Before inserting new batteries, wipe the battery compartment clean.
Dispose of batteries according to your regional regulations.
3 En
CONTROLS AND FUNCTIONS
CONTROLS AND FUNCTIONS
Front panel
(R-S700)
y
y
indicates buttons and controls that can also be used to
control Zone 2. For more information about Zone 2, see pages 45
and 46.
This setting is retained even if you turn off this unit.
1 MAIN ZONE A
Turns on this unit’s Main Zone unit or sets the Main Zone
to standby mode (see page 16).
Note
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
2 MAIN ZONE indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
Note
The MAIN ZONE indicator is brightly lit while an iPhone/iPod is
charging.
3 SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed (see
page 16).
4 DIMMER
Changes the brightness level of the front panel display.
Choose brightness from 3 levels by pressing this button
repeatedly.
4 En
5 FM MODE/INFO
Changes the FM radio wave reception mode (stereo or
monaural) when TUNER is selected as the input source
(see page 21).
Changes the SIRIUS Satellite Radio information
displayed on the front panel display when SIRIUS is
selected as the input source (see page 34).
Changes the playback information displayed about the
song playing on the iPhone/iPod when DOCK is selected
as the input source (see page 36).
Note
Playback information can only be displayed for an iPhone/iPod
that is connected using a Universal Dock for iPod.
6 MEMORY
Stores the current FM/AM station as a preset when
TUNER is selected as the input source (see page 23).
Stores the current SIRIUS channel as a preset when
SIRIUS is selected as the input source (see page 30).
7 CLEAR
Clears the current FM/AM preset station when TUNER is
selected as the input source (see page 24).
Clears the current SIRIUS preset channel when SIRIUS is
selected as the input source (see page 32).
8 Front panel display
Shows information about the operational status of this
unit.
CONTROLS AND FUNCTIONS
0 FM/CATEGORY l, AM/CATEGORY h
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
A TUNING/CH jj / ii
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
B Remote control sensor
Receives infrared signals from the remote control.
Note
Switch the remote control ID between ID1 and ID2 when using
multiple Yamaha receivers or amplifiers (see page 44).
C ZONE 2
Turns on Zone 2 or sets ZONE 2 to standby mode. When
Zone 2 is turned on, signals are output to the ZONE 2
OUT jacks (see page 45).
D ZONE 2 CONTROL
Allows buttons and controls on the front panel to be used
to control Zone 2. For more information about controlling
Zone 2, see page 46.
H REC OUT selector
Selects a source for recording to a CD recorder or to a tape
deck independently of the INPUT selector setting,
allowing you to record the selected source while listening
to another source (see page 19).
I BASS control
Increases or decreases the low frequency response. The
center position produces a flat response (see page 18).
J TREBLE control
Increases or decreases the high frequency response. The
center position produces a flat response (see page 18).
K BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (see page
18).
L LOUDNESS control
Retains a full tonal range at any volume level to
compensate for the human ears’ loss of sensitivity to high
and low-frequency ranges at a low volume level (see page
18).
M INPUT selector
Selects the input source you want to listen to.
N VOLUME control (
R-S700 only)
Increases or decreases the sound output level.
Note
This does not affect the output level of the REC jacks.
E CD DIRECT AMP and indicator (R-S700 only)
Allows you to listen to a CD source in the purest possible
sound (see page 17). The indicator lights up and the front
panel display turns off when this function is turned on.
Notes
• If both the CD DIRECT AMP and the PURE DIRECT are
turned on, only the CD DIRECT AMP will function.
• Zone 2 cannot be used while this function is turned on.
F PURE DIRECT and indicator
Allows you to listen to a source in the purest possible
sound (see page 17). The indicator above it lights up and
the front panel display turns off when this function is
turned on.
Note
Zone 2 cannot be used while this function is turned on.
G PHONES jack
Outputs audio to your headphones for private listening.
Note
Press SPEAKER A/B so that the SP A/B indicators turn off
before you connect your headphones to the PHONES jack.
5 En
INTRODUCTION
9 PRESET j / i
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Selects a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
CONTROLS AND FUNCTIONS
Front panel display
1 SP (SPEAKERS) A/B indicators
Light up according to the set of speakers selected.
Both indicators light up when both sets of speakers are
selected.
B P indicator
Lights up when a preset number is selected. Blinks while
you are registering a preset radio station or SIRIUS
channel.
2 Input source indicators
Light up brightly to indicate the input source that is
currently selected.
C Multi-information display
Shows information when adjusting or changing settings.
3 PRESET indicator
Lights up when you recall a preset radio station or SIRIUS
channel. Blinks while the automatic station preset feature
is scanning for FM stations to register as presets.
4 MEMORY indicator
Lights up or blinks when an FM/AM station or SIRIUS
channel is being stored as a preset.
5 CATEGORY indicator
Lights up when searching for a SIRIUS channel by
category.
6 TUNED indicator
Lights up when this unit is tuned in to an FM or AM
station.
7 STEREO indicator
Lights up when this unit is receiving a strong signal for an
FM stereo broadcast.
8 HOLD indicator
Blinks when the hold function is used to display the artist
name, song title, etc. while listening to a SIRIUS channel.
9 ZONE 2 indicator
Lights up when Zone 2 is turned on.
0 SLEEP indicator
Lights up when the sleep timer is turned on.
A MUTE indicator
Blinks while the MUTE function is turned on.
6 En
D Volume indicator
Displays the current volume level.
CONTROLS AND
AND FUNCTIONS
FUNCTIONS
CONTROLS
Rear panel
INTRODUCTION
(R-S700)
1 TRIGGER OUT jack (R-S700 only)
When this unit is turned on or when a certain input source
is selected, this unit can send a 12 V/100 mA direct
electric current via the TRIGGER OUT jack that can be
used to control an external component. The current is sent
according to the “Trigger out” setting in the Option menu
(see page 40).
Note
Do not connect a component that requires more than 100 mA of
electric current, otherwise the component may not perform
consistently or properly due to insufficient power.
2 REMOTE 2 IN jack (R-S700 only)
Used to receive remote control signals (see page 45).
3 REMOTE 1 IN/OUT jacks
Used to send and receive remote control signals (see page
45).
4 GND terminal
Used to connect a turntable (see page 12).
5 ZONE 2 OUT jacks
Used to connect a Zone 2 component (see page 45).
6 Antenna terminals
Used to connect FM and AM antennas (see page 14).
7 TAPE jacks
Used to connect a tape deck (see page 12).
8 DOCK jack
Used to connect an optional Yamaha Universal Dock for
iPod (such as the YDS-12), Wireless System for iPod
(YID-W10), or Bluetooth Wireless Audio Receiver
(YBA-10) (see page 35).
9 PHONO jacks
Used to connect a turntable (see page 12).
0 CD jacks
Used to connect a CD player (see page 12).
A LINE 1-3 jacks
Used to connect audio components (see page 12).
B iPod VIDEO output jack (R-S700 only)
Used to send iPhone/iPod video content to a video
monitor, such as a TV (see page 35).
Note
Video content output is possible only when an iPhone/iPod is
connected this unit using a Universal Dock for iPod (such as the
YDS-12).
C SIRIUS jack
Used to connect SiriusConnect tuner (sold separately) (see
page 27).
D COUPLER jacks (R-S700 only)
Used to connect an external unit (see page 15).
E SUBWOOFER OUT jack
Used to connect a subwoofer with built-in amplifier (see
page 12).
F POWER MANAGEMENT switch
Used to enable or disable the automatic power down
function. When this function is enabled, this unit’s Main
zone and Zone 2 automatically enters standby mode if this
unit is not operated for a certain amount of time (3 settings
are available; see page 43).
G SPEAKERS terminals
Used to connect speakers (see page 12).
H IMPEDANCE SELECTOR switch
Used to select the impedance setting (see page 13).
I AC IN (R-S700 only)
Used to plug in the supplied power cable (see page 15).
7 En
CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each button on the
remote control used to control this unit or other
components made by Yamaha or other manufacturers.
2 RECEIVER A
Turns this unit on, or sets it to standby mode.
y
3 ID
Changes the remote control ID (see page 44).
indicates buttons that can also be used to control Zone 2.
For more information about Zone 2, see pages 45 and 46.
4 MAIN/ZONE 2
Switches the zone to be operated by the remote control
between the Main Zone and Zone 2 (see page 46).
5 SLEEP
Sets the sleep timer (see page 19).
6 Input selector buttons
Selects the input source and changes the control area (see
page 47).
7 OPTION
Turns the OPTION menu on and off (see page 40).
8 SPEAKERS A/B
Turns on and off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed.
9 MUTE
Mutes the sound output. Press again to restore the sound
output to the previous volume level.
0 VOLUME +/– (
R-S700 only)
Increases or decreases the sound output level.
Note
This does not affect the output level of the REC jacks.
A RETURN
Returns to the previous menu or ends the menu display
when using the Option menu (see page 40).
B B / C / D / E / ENTER
Selects and confirms items in the Option menu (see page
40).
■ Common controls
The following buttons can be used no matter which input
source is selected.
1 Infrared signal transmitter
Sends infrared signals.
8 En
C CODE SET/RECEIVER
Used to program the remote control so that it can control
your other external components (see page 49).
After using the remote control to control one of your
components, this button is used to switch the remote
control to receiver mode so that remote control commands
will be sent to this unit (see page 48).
CONTROLS AND FUNCTIONS
■ External component controls
D TUN./CH H / I
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
A RETURN
The following buttons can be used when SIRIUS or
TUNER is selected as the input source.
The following buttons can be used to control external
audio/video components when CD, TAPE, PHONO,
LINE1, LINE2, or LINE3 is selected as the input source.
For more information, see page 47.
B B / C / D / E / ENTER
G Numeric buttons, ENTER
E PRESET F / G
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Select a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
F FM/CATEGORY l, AM/CATEGORY h
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
I TOP MENU
J MENU
K DISPLAY
L SOURCE A
M External component control buttons
N TV control buttons
G Numeric buttons, ENTER
Specifies the frequency or the preset number of the FM/
AM station when TUNER is selected as the input source
(see page 21).
Specifies the channel number or preset number of the
SIRIUS channel when SIRIUS is selected as the input
source (see page 30).
H INFO
Changes the SIRIUS Satellite Radio information
displayed on the front panel display when SIRIUS is
selected as the input source (see page 34).
■ iPod controls
The following buttons can be used when DOCK is
selected as the input source for listening to an iPhone/
iPod. For more information, see page 35.
A REPEAT
B MENU/ Ee / b / a / ENTER
H INFO
I SHUFFLE
J B
K C
9 En
INTRODUCTION
■ SIRIUS and FM/AM controls
CONTROLS AND FUNCTIONS
Zone 2 remote control (R-S700 only)
This section describes the function of each button on the
Zone 2 remote control, which is used to control Zone 2.
6 MUTE
Mutes the sound output to Zone 2. Press again to restore
the sound output to the previous volume level.
7 VOLUME +/–
Increases or decreases the sound output level of Zone 2.
■ SIRIUS and FM/AM controls
The following buttons can be used when SIRIUS or
TUNER is selected as the input source for Zone 2.
8 FM/CATEGORY l, AM/CATEGORY h
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
9 PRESET j / i
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Selects a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
0 TUN./CH jj / ii
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
Insulation sheet
Note
The Zone 2 remote control comes with a battery already installed.
Before using the Zone 2 remote control for the very first time,
pull out the insulation sheet, as shown.
■ Common controls for Zone 2
The following buttons can be used no matter which input
source is selected for Zone 2.
1 Infrared signal transmitter
Sends infrared signals.
2 A (Zone 2 standby)
Sets Zone 2 to standby mode.
3
(Zone 2 on)
Turns on Zone 2.
4 ID
Changes the Zone 2 remote control ID (see page 44).
5 Zone 2 input selector buttons
Selects the desired input source for Zone 2.
10 En
A Numeric buttons, ENTER
Specifies the frequency or the preset number of the FM/
AM station when TUNER is selected as the input source
(see page 21).
Specifies the channel number or preset number of the
SIRIUS channel when SIRIUS is selected as the input
source (see page 30).
■ iPod controls
The following buttons can be used when DOCK is
selected as the input source for Zone 2, for listening to an
iPhone/iPod. For more information, see page 35.
B MENU/ Ee / b / a / ENTER
C
/
CONTROLS AND FUNCTIONS
■ Yamaha CD player controls
A Yamaha CD player control buttons
• s
Stops playback
• e
Pauses playback
• p
Starts playback
• DISC SKIP Skips to the next disc in a CD changer
• b
• a
Skips backward
Skips forward
•
• w
• f
Ejects the disc
Rewinds playback
Fast-forwards playback
Note
Not all Yamaha CD players can be controlled by the Zone 2
remote control.
Using the remote controls
■ Installing batteries
■ Operation range
AAA, R03, UM-4 batteries
The remote controls transmit a directional infrared beam.
Be sure to aim the remote controls directly at the remote
control sensor on the front panel of this unit or on the
infrared signal receiver in Zone 2 during operation.
Approximately
6 m (20 ft)
■ Replacing the battery in the Zone 2
remote control
Change the battery when the operation range of the Zone 2
remote control decreases.
Remote control or Zone 2
remote control
Straight pin
CR2025 battery
11 En
INTRODUCTION
The following buttons can be used to control a Yamaha
CD player when CD is selected as the input source for
Zone 2.
CONNECTIONS
CONNECTIONS
Connecting speakers and source components
CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner’s manual for each of your components.
• Use RCA cables for audio components (except for speaker connections and DOCK jack connections).
• The IMPEDANCE SELECTOR must be set to the appropriate position before connecting speakers. See page 13 for
details.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the
speakers.
For information about
other components that
can be connected to
this unit, see page 35.
Turntable
Tape deck
Audio
out
Audio
out
CD player
GND
Audio
out
VCR, etc.
Audio
out
Audio
out
DVD player,
etc.
Speakers A
Audio
in
Audio
in
CD recorder,
etc.
Audio
out
Subwoofer
Speakers B
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
12 En
CONNECTIONS
■ IMPEDANCE SELECTOR switch
CAUTION
Switch
position
Impedance level
HIGH
• If you use one set (A or B), the impedance of
each speaker must be 6 Ω or higher (R-S700)
or 8 Ω or higher (R-S500).
• If you make bi-wire connections, the
impedance of each speaker must be 6 Ω or
higher (R-S700) or 8 Ω or higher (R-S500).
See page 13 for Bi-wire connection.
LOW
• If you use one set (A or B), the impedance of
each speaker must be 4 Ω or higher.
• If you use two sets (A and B) simultaneously,
the impedance of each speaker must be 8 Ω or
higher.
• If you make bi-wire connections, the
impedance of each speaker must be 4 Ω or
higher. See page 13 for Bi-wire connection.
■ Connecting speaker cables
Remove
approximately
10 mm (3/8 in)
of insulation
from the end of
each speaker
cable.
Note
Bi-wire connection separates the woofer from the
combined midrange and tweeter section. A bi-wire
compatible speaker has four binding post terminals. These
two sets of terminals allow the speaker to be split into two
independent sections. With these connections, the mid and
high frequency drivers are connected to one set of
terminals and the low frequency driver to another set of
terminals.
This unit
Speaker
PREPARATION
Do not change the IMPEDANCE SELECTOR switch
while the power of this unit is turned on, as doing so may
damage the unit.
If the unit fails to turn on, the IMPEDANCE SELECTOR
switch may not be fully slid to either position. If this is the
case, remove the power cable and slide the switch all the
way to either position.
Select the switch position (LOW or HIGH) according to
the impedance of the speakers in your system.
■ Bi-wire connection
Connect the other speaker to the other set of terminals in
the same way.
CAUTION
When making bi-wire connections, set the IMPEDANCE
SELECTOR switch to HIGH or LOW depending on the
impedance of your speakers:
6 Ω or higher: HIGH (R-S700)
8 Ω or higher: HIGH (R-S500)
4 Ω or higher: LOW
See page 13 for more information about the
IMPEDANCE SELECTOR switch.
Note
When making bi-wire connections, remove the shorting bridges
or cables on the speaker.
y
To use the bi-wire connections, press SPEAKERS A and
SPEAKERS B on the front panel or on the remote control so that
both SP A and B light up on the front panel display.
When inserting speaker cables into the speaker terminals, insert
only the bare speaker wire. If insulated cable is inserted, the
connection may be poor and sound may not be heard.
■ Connecting via banana plug
Tighten the knob and then insert the banana plug into the
end of the corresponding terminal.
SPEAKERS A/B
Banana plug
SPEAKERS A/B
13 En
CONNECTIONS
Connecting the FM and AM antennas
Indoor antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should
provide sufficient signal strength. Connect each antenna correctly to the designated terminals.
Note
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
Indoor FM antenna
(included)
Outdoor FM antenna
Outdoor AM antenna
Use 5 to 10 m of vinylcovered wire extended
outdoors from a window.
AM loop antenna
(included)
• The AM loop antenna
should always be connected,
even if an outdoor AM
antenna is connected to this
unit.
• The AM loop antenna
should be placed away from
this unit.
Ground (GND terminal)
For maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A
good earth ground is a metal stake driven into moist earth.
■ Assembling the supplied AM loop
antenna
14 En
■ Connecting the wire of the AM loop
antenna
CONNECTIONS
Using COUPLER jacks
(R-S700 only)
Plug the power cable into the AC IN on the rear panel of
this unit (R-S700 only).
Plug the power cable into the AC wall outlet after all other
connections are complete.
Power cable
(R-S700 only)
Jumper pins
Notes
• If you do not use the COUPLER jacks, never remove the
jumper pins from these jacks. If removed, no sound will be
output from this unit.
• Before installing or removing the jumper pins, be sure to
disconnect the power cable of the unit. Leaving the power cable
connected could cause noise to be emitted from the speakers or
damage the unit.
• When you use this unit as a power amplifier, connect the output
jacks of the external control amplifier, etc. to the MAIN IN
jacks of this unit. In this case, the controls of this unit will not
function except the PHONES jack and the SPEAKERS A/B
buttons. Use the controls on the external control amplifier to
make volume adjustments, etc.
15 En
PREPARATION
Removing the jumper pins from the PRE OUT/MAIN IN
jacks enables this unit to operate separately as a control
amplifier or a power amplifier. These jacks are used to
connect a signal-processing system such as a graphic
equalizer or a surround-sound processor to this unit. If an
external unit is connected to these jacks, the VOLUME
control of this unit can be used to adjust the overall sound
output level.
To connect an external unit, first remove the jumper pins
from the PRE OUT/MAIN IN jacks and then connect the
input jacks of that external unit to the PRE OUT jacks or
its output jacks to the MAIN IN jacks. For details, refer to
the owner’s manual included with the external unit to be
connected.
Connecting power cable
PLAYING AND RECORDING
PLAYING AND RECORDING
CAUTION
Extreme caution should be exercised when you play back CDs encoded in DTS.
If you play back a CD encoded in DTS on a CD player that does not support DTS, only noise will be heard, and this noise
may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output
level of your CD player before you play back a CD encoded in DTS.
Playing a source
3
Press SPEAKERS A and/or SPEAKERS B on
the front panel or on the remote control to
select speakers A and/or speakers B.
When speaker set A or speaker set B are turned on,
SP A or SP B is displayed on the front panel display
accordingly (see page 6).
Notes
SPEAKERS A/B
MAIN ZONE A
INPUT selector
VOLUME
• When one set of speakers is connected using bi-wire
connections, or when using two sets of speakers simultaneously
(A and B), make sure SP A and SP B are displayed on the front
panel display.
• When listening with headphones, turn off the speakers.
4
Play the source.
5
Rotate the VOLUME control on the front
panel (or press VOLUME +/– on the remote
control) to adjust the sound output level.
RECEIVER A
Input selector
buttons
SPEAKERS A/B
y
You can adjust the tonal quality by using the BASS, TREBLE,
BALANCE and LOUDNESS controls, the CD DIRECT AMP
switch (R-S700 only), or the PURE DIRECT switch on the front
panel (see page 17).
6
VOLUME +/–
1
Press MAIN ZONE A on the front panel (or
RECEIVER A on the remote control) to turn
on this unit.
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the input source
you want to listen to.
16 En
Press MAIN ZONE A on the front panel again
(or RECEIVER A on the remote control) to
finish using this unit and set it to standby
mode.
PLAYING AND RECORDING
Adjusting the tonal quality
■ Using the CD DIRECT AMP switch
(R-S700 only)
CD Direct Amp feature
Generates a normal phase and reverse phase signal for
both the left and right channels from the input signal
and uses the four electronic volumes to send a
balanced signal to the amplifying circuit. This feature
provides clearer sound as a result of:
• improved signal-to-noise ratio
• external noise canceling
• reduced distortion
Routes input signals from your audio sources so that the
input signals bypass the BASS, TREBLE, BALANCE and
LOUDNESS controls, thus eliminating any alterations to
the audio signals and creating the purest possible sound.
The PURE DIRECT indicator lights up and the front panel
display turns off after a few seconds.
PURE DIRECT switch
Notes
• Zone 2 cannot be used while the PURE DIRECT feature is
turned on.
• The BASS, TREBLE, BALANCE, and LOUDNESS controls
do not function while the PURE DIRECT feature is turned on.
• This setting is retained even if you turn off this unit.
CD DIRECT AMP switch
Notes
• If both the CD DIRECT AMP and the PURE DIRECT switches
are turned on, only the CD DIRECT AMP switch will function.
• Zone 2 cannot be used while the CD DIRECT AMP feature is
turned on.
• The INPUT selector and the BASS, TREBLE, BALANCE, and
LOUDNESS controls do not function while the CD DIRECT
AMP feature is turned on.
• A CD player must be connected to the CD jacks in order to use
the CD DIRECT AMP feature.
• This setting is retained even if you turn off this unit.
17 En
BASIC
OPERATION
Routes input signals from your CD player directly to the
specially built-in amplifier for the CD player. As a result,
the input signals bypass the INPUT selector and the
BASS, TREBLE, BALANCE and LOUDNESS controls
and then sent to the power amplifier, thus eliminating any
alterations to the CD signals and creating the purest
possible sound. The CD DIRECT AMP indicator lights up
and the front panel display turns off after a few seconds.
■ Using the PURE DIRECT switch
PLAYING AND RECORDING
■ Adjusting the BASS and TREBLE
controls
■ Adjusting the LOUDNESS control
LOUDNESS
VOLUME
TREBLE
BASS
The BASS and TREBLE controls adjust high and low
frequency response.
The center position produces a flat response.
BASS
When you feel there is not enough bass (low frequency
sound), rotate clockwise to boost. When you feel there is
too much bass, rotate counterclockwise to suppress.
Control range: –10 dB to +10 dB (20 Hz)
VOLUME +/–
Retain a full tonal range at any volume level, thus
compensating for the human ears’ loss of sensitivity to
high and low-frequency ranges at low volume.
CAUTION
TREBLE
When you feel there is not enough treble (high frequency
sound), rotate clockwise to boost. When you feel there is
too much treble, rotate counterclockwise to suppress.
Control range: –10 dB to +10 dB (20 kHz)
If the CD DIRECT AMP switch (R-S700 only) or the
PURE DIRECT switch is turned on with the LOUDNESS
control set at a certain level, the input signals bypass the
LOUDNESS control, resulting in a sudden increase in the
sound output level. To prevent your ears or the speakers
from being damaged, be sure to press the CD DIRECT
AMP switch (R-S700 only) or the PURE DIRECT switch
after lowering the sound output level or after checking that
the LOUDNESS control is properly set.
■ Adjusting the BALANCE control
1
Set the LOUDNESS control to the FLAT
position.
2
Rotate the VOLUME control on the front
panel (or press VOLUME +/– on the remote
control) to set the sound output level to the
loudest listening level that you would listen
to.
3
Rotate the LOUDNESS control until the
desired volume is obtained.
BALANCE
The BALANCE control adjusts the sound output balance
of the left and right speakers to compensate for sound
imbalance caused by speaker locations or listening room
conditions.
y
After setting the LOUDNESS control, enjoy listening to music at
your preferred volume level. If the effect of the LOUDNESS
control setting is too strong or weak, readjust the LOUDNESS
control.
18 En
PLAYING AND RECORDING
Recording a source
Using the sleep timer
Notes
• Audio signals are not output to the TAPE REC or LINE 1 REC
output jacks when TAPE or LINE 1 is selected with the REC
OUT selector.
Audio signals are output to both the TAPE REC and the LINE 1
REC output jacks if when PHONO, DOCK, TUNER, CD,
SOURCE or LINE 2 is selected with the REC OUT selector.
• This unit must be turned on in order to record.
• The VOLUME, BASS, TREBLE, BALANCE and
LOUDNESS controls and the CD DIRECT AMP switch (RS700 only) and the PURE DIRECT switch have no effect on the
source being recorded.
• Check the copyright laws in your country before recording from
records, CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.
Use this feature to automatically set this unit to standby
mode after a certain amount of time. The sleep timer is
useful when you are going to sleep while this unit is
playing or recording a source.
MAIN ZONE A
RECEIVER A
SLEEP
BASIC
OPERATION
REC OUT selector
1
INPUT selector
Rotate the REC OUT selector on the front
panel to select the source you want to
record.
When SOURCE is selected, the current input source
is output.
Notes
• The sleep timer can only be set with the remote control.
• The sleep timer automatically turns off Zone 2. However, Zone
2 components are not turned off.
1
Note
SIRIUS Satellite Radio broadcasts cannot be recorded.
2
Play the source and begin recording using
the recording device connected to the REC
jacks (TAPE and/or LINE 1) on the rear panel.
See page 12.
Press SLEEP repeatedly to set the amount of
time before this unit is set to standby mode.
Each time you press SLEEP, the front panel display
changes as shown below.
The SLEEP indicator blinks while setting the amount
of time for the sleep timer.
If the sleep timer is set, the SLEEP indicator on the
front panel display lights up.
y
• To disable the sleep timer, select “Sleep Off”.
• The sleep timer setting can also be canceled by pressing
RECEIVER A on the remote control (or MAIN ZONE A on
the front panel) to set this unit to standby mode.
19 En
FM/AM TUNING
FM/AM TUNING
There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of
station signals.
Automatic tuning
3
Automatic tuning is effective when station signals are
strong and there is no interference.
Press and hold TUNING/CH jj / ii on the
front panel (or TUN./CH H / I on the remote
control) for more than 1 second to begin
automatic tuning.
Press ii (or H) to tune in to a higher frequency.
Press jj (or I) to tune in to a lower frequency.
Notes
INPUT selector
TUNING/CH jj / ii
FM, AM
TUN./CH H / I
TUNER
FM, AM
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input source.
2
Press FM or AM on the front panel (or FM or
AM on the remote control) to select the
reception band (FM or AM).
FM or AM is displayed on the front panel display.
20 En
• When you tune in to a station, the frequency of the station is
displayed on the front panel display.
• If the tuning search does not stop at the desired station because
the station signals are weak, try using the manual tuning
method.
■ Auto Mute feature
When listening to an FM radio station, the output will
automatically be muted when the radio signal is weak if
the station was tuned in to by:
• using the automatic tuning feature
• recalling a preset that was registered using the
automatic preset registration feature
If you want to listen to a station that has a weak signal,
tune in to the station manually.
FM/AM TUNING
Manual tuning
4
Manual tuning is effective when station signals are weak.
To tune in by direct frequency tuning, press
the numeric buttons on the remote control to
enter the frequency of the station.
Enter only integers. For example, if you want to set
the frequency to 88.9 MHz, enter “889”.
Notes
INPUT selector
TUNING/CH jj / ii
FM, AM
• When you press the numeric buttons on the remote control
during preset tuning, a preset number is selected. Set the tuning
mode to frequency tuning mode using TUNING/CH jj / ii on
the front panel (or TUN./CH H / I on the remote control)
before pressing the numeric buttons.
• “WRONG STATION!” is displayed on the front panel display if
you enter a frequency that is out of receivable range. Make sure
that the entered frequency is correct.
BASIC OPERATION
■ Improving FM reception
TUNER
FM, AM
Numeric
buttons
FM MODE/INFO
1
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input source.
2
Press FM or AM on the front panel (or FM or
AM on the remote control) to select the
reception band (FM or AM).
FM or AM is displayed on the front panel display.
3
Press TUNING/CH jj / ii on the front panel
(or TUN./CH H / I on the remote control) to
manually tune in to the desired station.
Press FM MODE/INFO on the front panel
repeatedly to select “STEREO” (automatic
stereo mode) or “MONO” (monaural mode)
when this unit is tuned in to an FM radio
station.
• When MONO is selected, FM broadcasts will be
heard in monaural sound.
• When STEREO is selected and an FM station with
a stereo broadcast is tuned in, the broadcast will be
heard in stereo.
Note
The STEREO indicator on the front panel lights up while
listening to a station in stereo.
y
The FM band reception mode (monaural or stereo) can also be
changed by selecting FM Mode in the Option menu (see page 40).
Note
When you tune in to a station, the frequency of the received
station is shown in the front panel display.
21 En
BASIC
OPERATION
TUN./CH H / I
If the signal from the station is weak and the sound quality
is not good, set the FM band reception mode to monaural
mode to improve reception.
FM/AM TUNING
Automatic station preset
(FM stations only)
You can use the automatic station preset function to
automatically register FM stations as presets. This
function enables this unit to automatically tune in to FM
stations that have a strong signal and store up to 40 of
those stations in order. You can then easily recall any
preset station by selecting its preset number.
3
Press OPTION on the remote control.
The Option menu for TUNER is displayed (see page
40).
4
Press B / C on the remote control to select
“Auto Preset”, and then press ENTER.
Notes
• If a station is registered to a preset number that already has a
station registered to it, the previously registered station is
overwritten.
• If the station you want to store is weak in signal strength, try
using the manual preset tuning method.
y
FM stations registered as presets using the automatic preset
registration feature will be heard in stereo.
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
y
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i on the front panel (or
PRESET F/G or B/C on the remote control).
• To cancel scanning, press FM or AM on the front panel (or FM
or AM or RETURN on the remote control).
Preset number
FM
INPUT selector
PRESET j / i
TUNER
PRESET F / G
FM
OPTION
B/C
ENTER
RETURN
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input sourse.
2
Press FM on the front panel (or FM on the
remote control) to select FM as the reception
band.
FM is displayed on the front panel display.
22 En
Frequency
When presets are registered, information is displayed
on the front panel display as shown in the illustration
above.
When scanning is complete, “FINISH” is displayed
and then the display returns to the Option menu.
To return the display to the original state, press
OPTION or RETURN on the remote control.
FM/AM TUNING
Manual station preset
3
You can manually register up to 40 FM/AM stations
(40 total). You can then easily recall any preset station by
selecting its preset number.
Press PRESET j / i on the front panel (or
PRESET F / G on the remote control) to
select the preset number to which the station
will be registered.
When you select a preset number to which no station
is registered, “EMPTY” is displayed. When you
select a preset number to which a station has already
been registered, the frequency of the station is
displayed.
PRESET j / i
MEMORY
Preset number
y
You can also select a preset number using the numeric buttons on
the remote control.
4
Press MEMORY on the front panel.
When registration is complete, the display returns to
the original state.
y
To cancel registration, RETURN on the remote control or do not
perform any operations for about 30 seconds.
RETURN
Numeric
buttons
1
Tune in to the desired FM/AM station.
See pages 20 and 21 for tuning instructions.
2
Press MEMORY on the front panel.
“MANUAL PRESET” is displayed briefly on the
front panel display, and then the preset number to
which the station will be registered is displayed.
y
By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (i.e., the
preset number following the last preset number used).
23 En
BASIC
OPERATION
PRESET F / G
FM/AM TUNING
Recalling a preset station
You can recall preset stations that were registered using
automatic station preset or manual station preset.
Clearing a preset station
Follow the steps below to clear a preset station.
CLEAR
PRESET j / i
PRESET F / G
1
Press PRESET j / i on the front panel (or
PRESET F / G on the remote control) to
select a preset number.
RETURN
1
Select the desired preset station number.
See “Recalling a preset station” on page 24.
2
Press CLEAR on the front panel.
The selected preset number flashes on the front panel
display.
y
• Preset numbers to which no stations are registered are skipped.
• “NO PRESETS” is displayed if no stations are registered.
• You can directly select a preset number by pressing the numeric
buttons on the remote control while recalling a preset station.
“EMPTY” is displayed on the display if you enter a preset
number to which no station is registered. “WRONG NUM.” is
displayed if you enter an invalid number.
• When you press the numeric buttons on the remote control
during normal tuning, a frequency is entered. Set the tuning
mode to preset tuning mode using PRESET j / i on the front
panel (or PRESET F / G on the remote control) before
pressing numeric buttons.
y
To cancel clearing the preset station, press RETURN on the
remote control or leave this unit without any operations for about
30 seconds.
3
24 En
Press CLEAR on the front panel to confirm.
“PXX: CLEARED” (XX indicates the preset
number) is displayed on the front panel display, and
then the display returns to its original state.
FM/AM TUNING
Clearing all preset stations
4
Follow the steps below to clear all preset stations.
Press D / E on the remote control to select
“YES”, and then press ENTER.
y
To cancel without clearing the presets, select “NO”.
When all presets have been cleared, “PRESET
CLEARED” is displayed, and then the display returns
to the Option menu.
INPUT selector
TUNER
5
To exit the Option menu, press OPTION or
RETURN on the remote control.
B/C/D/E
ENTER
RETURN
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input sourse.
2
Press OPTION on the remote control.
The Option menu for TUNER is displayed (see
page 40).
3
Press B / C on the remote control to select
“Clr All Preset”, and then press ENTER.
y
To cancel the operation and return to the Option menu, press
RETURN on the remote control.
25 En
BASIC
OPERATION
OPTION
LISTENING TO SIRIUS SATELLITE RADIO™
LISTENING TO SIRIUS Satellite Radio™
Listening to Satellite Radio
To listen to Satellite Radio, you’ll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready
receiver. SIRIUS Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada.
Satellite Radio delivers a variety of commercial-free music from categories ranging from Pop, Rock, Country, R&B,
Dance, Jazz, Classical and many more plus coverage of all the top professional and college sports including play by play
games from select leagues and teams. Additional programming includes expert sports talk, uncensored entertainment,
comedy, family programming, local traffic and weather and news from your most trusted sources.
Once you’ve purchased a SIRIUS tuner you’ll need to activate it and subscribe to begin enjoying the service. Easy to
follow installation and setup instructions are provided with the SIRIUS tuner. There are a variety of programming
packages available, including the option of adding “The Best of XM” programming to the SIRIUS service. The “Best of
XM” service is not available to SIRIUS Canada subscribers at this time. Please check with SIRIUS Canada for any
updates using the numbers and web address below.
Family friendly packages are also available to restrict channels featuring content that may be inappropriate for children.
To subscribe to SIRIUS, U.S. and Canadian customers can call 1-888-539-SIRI (1-888-539-7474) or visit sirius.com
(US) or siriuscanada.ca (Canada).
SIRIUS Radio Legal
SIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks
and logos are the property of their respective owners. All rights reserved. SIRIUS subscription sold separately. Taxes
and a one-time activation fee may apply. SIRIUS tuner required (sold separately) to receive the SIRIUS service. All
programming and fees subject to change. It is prohibited to copy, decompile, disassemble, reverse engineer, hack,
manipulate or otherwise make available any technology or software incorporated in receivers compatible with the
SIRIUS Satellite Radio System. Service not available in Alaska or Hawaii.
26 En
LISTENING TO SIRIUS Satellite Radio™
Connecting the SiriusConnect™
tuner
Connect the SiriusConnect tuner (sold separately) to the
SIRIUS jack on the rear panel of this unit. For details, see
the instruction manuals provided with the SiriusConnect
tuner.
SiriusConnect Tuner and the
antenna (sold separately)
Activating SIRIUS Satellite
Radio™ subscription
Before using the SIRIUS Satellite Radio feature, you need
to activate your SIRIUS Satellite Radio subscription. To
activate the subscription you need the Sirius ID which is
uniquely assigned to the SiriusConnect tuner. A Sirius ID
is 12-digit number which is indicated on the package of
the SiriusConnect tuner and on the label of the
SiriusConnect tuner. The Sirius ID is also displayed on the
front panel display when you tune in to the SIRIUS
Satellite Radio channel “0”.
■ Displaying the Sirius ID of your
SiriusConnect tuner
To the AC wall outlet
• To ensure optimal reception of SIRIUS Satellite Radio signals,
the antenna of the SiriusConnect tuner must be placed at or near
a window with no obstacles in the path to the sky. You can
mount it indoors or outdoors. The orientation of the antenna for
the best reception differs depending on the area. Refer to the
instruction manuals provided with the SiriusConnect tuner for
information about antenna installation.
• Use the “Antenna” information on the front panel display (see
page 34) to check the antenna reception level and adjust the
orientation of the antenna.
• You need to connect the SiriusConnect tuner to the AC wall
outlet.
INPUT selector
SIRIUS
Notes
• If “CHECK SR TUNER” or “ANTENNA ERROR” is
displayed on the front panel display, the SiriusConnect tuner or
antenna is not connected correctly. In such cases, check the
connection of the SiriusConnect tuner and the antenna.
• If “NOT SUPPORTED” is displayed on the front panel display,
this unit does not support the connected SiriusConnect tuner.
0
ENTER
27 En
BASIC
OPERATION
y
LISTENING TO SIRIUS Satellite Radio™
1
Rotate the INPUT selector on the front panel
(or press SIRIUS on the remote control) to
select SIRIUS as the input source.
2
Press 0 on the remote control and then
ENTER to display the Sirius ID of your
SiriusConnect tuner.
“000 Sirius ID” and “xxxxxxxxxxxx” is displayed
alternately on the front panel display.
(“xxxxxxxxxxxx” indicates the 12-digit Sirius ID of
your SiriusConnect tuner.)
Write the Sirius ID below.
SIRIUS Satellite Radio™
operations
FM MODE/INFO
INPUT selector
ID:________________________________________
3
Contact SIRIUS Satellite Radio to activate
your subscription.
SIRIUS Satellite Radio online information
Contact for activation
URL: https://activate.siriusradio.com/
Phone: 1-888-539-SIRIUS (1-888-539-7474)
SIRIUS
INFO
y
Status messages are displayed on the front panel display during
the activation. For details, see “SIRIUS Satellite Radio™” on
page 53. Once the activation is finished, “SUB UPDATED”
appears.
1
Rotate the INPUT selector on the front panel
(or press SIRIUS on the remote control) to
select SIRIUS as the input source.
The SIRIUS indicator lights up on the front panel
display and the SIRIUS Satellite Radio information
(such as channel number, channel name, category,
artist name, or song title) for the currently selected
channel is displayed on the front panel display.
Channel number
Channel name
y
• When you select SIRIUS as the input source, this unit
automatically recalls the previously selected channel.
• You can change the SIRIUS Satellite Radio information that is
displayed by pressing FM MODE/INFO on the front panel (or
INFO on the remote control) (see page 34).
Notes
• If you have not activated your subscription yet, you can only
select “184” or “000”.
• If a status message or an error message is displayed on the front
panel display, see “SIRIUS Satellite Radio™” (see page 53).
28 En
LISTENING TO SIRIUS Satellite Radio™
y
2
Search for a channel by using one of the
SIRIUS Satellite Radio search modes.
• All channel search mode
Selects a channel from a list of all channels (see
page 29).
• Category search mode
Selects a channel by category (see page 29).
• Direct number access mode
Selects a channel directly by channel number (see
page 30).
• Preset search mode
Selects a channel from the preset channels (see
page 31).
You can register channels as presets and then easily
recall any preset channel by selecting its preset
number.
• You can search for a channel quickly by holding down
TUNING/CH jj / ii on the front panel (or TUN./CH H / I on
the remote control).
• You can skip to channels in the previous or next category by
pressing CATEGORY l / h on the front panel (or
CATEGORY l / h on the remote control).
■ Category search mode
TUNING/CH jj / ii
CATEGORY l / h
y
TUN./CH H / I
■ All channel search mode
CATEGORY l / h
1
TUNING/CH jj / ii
CATEGORY l / h
Press CATEGORY l / h on the front panel
(or CATEGORY l / h on the remote control)
to select a channel category.
The CATEGORY indicator lights up in the front
panel display when selecting a category. When you
select a category, the first channel in the category is
selected.
TUN./CH H / I
Category name
y
CATEGORY l / h
1
Press TUNING/CH jj / ii on the front panel
(or TUN./CH H / I on the remote control)
repeatedly to search for a channel from a list
of all channels.
You can search for a channel category quickly by pressing and
holding CATEGORY l / h on the front panel (or CATEGORY
l / h on the front panel).
Note
If no operations are performed for 10 seconds, the search mode
returns to the all channel search mode.
29 En
BASIC
OPERATION
• You can display SIRIUS Satellite Radio information on the
front panel display (see page 34).
• If you tune in to a channel that you do not subscribe to, “CALL
888-539-SIRIUS TO SUBSCRIBE” scrolls across the front
panel display, and then “CALL SIRIUS” is displayed.
• You can register SIRIUS Satellite Radio channels as presets
(see page 30).
LISTENING TO SIRIUS Satellite Radio™
2
While the CATEGORY indicator on the front
panel display is lit, press TUNING/CH jj / ii
on the front panel (or TUN./CH H / I on the
remote control) repeatedly to search for a
channel within the selected channel
category.
Registering and recalling SIRIUS
Satellite Radio™ channels
Up to 40 SIRIUS Satellite Radio channels can be
registered as preset channels.
■ Registering preset channels
y
• You can search for a channel quickly by pressing and holding
TUNING/CH jj / ii on the front panel (or TUN./CH H / I on
the remote control).
• In the category search mode, you can only search for a channel
within the selected channel category.
Note
PRESET j / i
This unit skips the following channels in all channel search mode
or category search mode. This is not a malfunction.
• channels that are locked (see page 32)
• channels that are not currently in service
• channels that you do not subscribe to
MEMORY
■ Direct number access mode
PRESET F / G
Numeric
buttons,
ENTER
RETURN
1
Press the numeric buttons on the remote
control to enter the desired three-digit
channel number.
For example, to enter the number 123, press the
numeric buttons “1,” “2” and then “3”.
Numeric
buttons
y
• To entering a one-digit or two-digit channel number, enter the
number using the numeric buttons and then press ENTER on
the remote control to confirm your entry.
• This unit automatically accepts your entry if you do not press
ENTER on the remote control within a few seconds after
entering the number.
• If the selected channel is locked, “PIN:___” is displayed on the
front panel display. Enter the 4-digit Parental Lock code
number by using the numeric buttons or press ENTER on the
remote control to cancel (see page 32).
• If the selected channel is not available, an advisory message
may be displayed. For details, refer to “SIRIUS Satellite
Radio™” (see page 53).
• If this unit is in preset search mode, a preset number is selected
instead of a channel number when you press the numeric
buttons on the remote control. To switch to direct number
access mode, press TUNING/CH jj / ii on the front panel (or
TUN./CH H / I on the remote control).
30 En
1
Search for a channel to be registered.
For details on searching channels, refer to the
following pages.
• All channel search mode (see page 29)
• Category search mode (see page 29)
• Direct number access mode (see page 30)
LISTENING TO SIRIUS Satellite Radio™
2
Press MEMORY on the front panel.
The indicator on the front panel display changes as
follows.
■ Recalling a preset channel (Preset
Search mode)
You can recall preset channels by specifying their preset
numbers.
Currently registered channel number
(or “---” if empty)
Preset number to which new
channel number is registered
Channel number to be
registered
PRESET j / i
y
• By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically
register the selected channel to an empty preset number (i.e., the
preset number following the last preset number used).
• To cancel registration, press RETURN on the remote control or
do not perform any operations for about 30 seconds.
Press PRESET j / i on the front panel (or
PRESET F / G on the remote control) to
select preset number.
PRESET F / G
y
• You can also select a preset number using the numeric buttons
on the remote control.
• If you select a preset number that is being used (i.e., if the
currently registered channel number is displayed next to the
preset number), the current preset will be overwritten.
4
1
Press MEMORY on the front panel.
Press PRESET j / i on the front panel (or
PRESET F / G on the remote control)
repeatedly to change the preset number
(1 to 40).
31 En
BASIC
OPERATION
3
LISTENING TO SIRIUS Satellite Radio™
■ Clearing a preset channel
Follow the steps below to clear a preset channel one at a
time.
CLEAR
Setting the Parental Lock
You can use the Parental Lock feature to limit access to
certain SIRIUS Satellite channels. This unit automatically
skips the locked channels when this unit is in the all
channel search mode or category search mode and you
search for a channel by pressing TUNING/CH jj / ii on
the front panel (or TUN./CH H / I on the remote
control).
■ Setting the code number and locking/
unlocking channels
Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked or unlocked.
OPTION
D/E/B/C
ENTER
RETURN
RETURN
1
Select the desired preset.
See “Recalling a preset channel (Preset Search
mode)” on page 31.
2
Press CLEAR on the front panel.
The selected preset number flashes on the front panel
display.
y
To cancel clearing the preset channel, press RETURN on the
remote control or leave this unit without any operations for
about 30 seconds.
3
Press CLEAR on the front panel to confirm.
“PXX: CLEARED” (XX indicates the preset
number) is displayed on the front panel display, and
then the display returns to its original state.
32 En
Numeric
buttons
1
Press OPTION on the remote control.
The Option menu for SIRIUS is displayed.
2
Press B / C on the remote control to select
“Parental Lock”, and then press ENTER.
LISTENING TO SIRIUS Satellite Radio™
3
Use D / E (to select a digit to edit) and B / C
(to select a number) on the remote control to
enter the 4-digit code number.
• If you are entering a code number for the first time,
enter the desired code number.
• If you have entered a code number before, enter the
same code number.
The entered code number is needed for tuning in the
channel or unlocking the channel. Write it down below.
Code number: ________________________________
6
Press ENTER on the remote control to lock
or unlock the selected channel.
• If the selected channel is locked, the channel
number and “LOCKED” are displayed on the front
panel display.
• If the selected channel is unlocked, the front panel
display changes from “LOCKED” to the channel
name.
7
Repeat steps 5 and 6 to lock or unlock other
channels as desired.
8
Press OPTION once or press RETURN
repeatedly on the remote control to exit the
“Parental Lock”.
• If the last channel you selected was locked, the unit
tunes in to “184 Weather/Emergency” or “000
SIRIUS ID”.
• If the last channel you selected was unlocked, the
unit tunes in to that channel.
y
You can also enter the code number using the numeric buttons on
the remote control.
Press ENTER on the remote control.
y
If the code number was entered for the first time, a confirmation
message is displayed. Press ENTER again to confirm the code
number.
The SIRIUS channel number and channel name are
displayed on the front panel display.
Notes
• If a code number is already registered and you enter a different
number, “WRONG” is displayed and the display returns to step
3. Enter the correct code number.
• If you forget the Parental lock code or want to change it, reset it
using “SR PIN” (see page 43).
5
■ Tuning in to the locked channels
Tune in to the channel using direct number access mode
(see page 30) or preset search mode (see page 31). When
you tune in to a locked channel “LOCKED” is displayed
on the front panel display, followed by the following
message. Enter the Parental lock code set previously by
using the numeric buttons on the remote control. To cancel
this operation, press ENTER on the remote control.
Search for a channel to be locked or
unlocked.
For details on searching channels, refer to the
following pages.
• All channel search mode (see page 29)
• Category search mode (see page 29)
Numeric
buttons,
ENTER
Note
When searching for a channel, the sound of the selected channel
can be heard even if the channel is locked.
Note
If the number you entered does not match the code number,
“WRONG” is displayed on the front panel display and this unit
tunes in to the previously selected channel.
33 En
BASIC
OPERATION
4
LISTENING TO SIRIUS Satellite Radio™
Displaying the SIRIUS Satellite
Radio™ information
1
Use this feature to display the SIRIUS Satellite Radio
information on the front panel display.
Press FM MODE/INFO on the front panel (or
INFO on the remote control) repeatedly to
switch between the following SIRIUS Satellite
Radio information display modes.
CHANNEL
Note
Channel number, channel name
If a status message or an error message is displayed on the front
panel display, see “SIRIUS Satellite Radio™” on page 53.
CATEGORY
Channel category
ARTIST/SONG
Artist name, song title
FM MODE/INFO
v
INFO
COMPOSER
Composer name
ANTENNA
ENTER
Antenna reception level
Back to “CHANNEL”
Display example (ANTENNA)
y
• If the SIRIUS Satellite Radio information contains a character
that cannot be recognized by this unit, the character will be
displayed as a space.
• When the antenna of the SiriusConnect tuner cannot receive the
signals, “ACQUIRING” is displayed on the front panel display.
• When an information is unavailable, “––––” is displayed.
• To hold or release the displayed information, press ENTER on
the remote control. While it is held, the “HOLD” indicator
flashes on the front panel display.
34 En
PLAYING BACK TUNES FROM YOUR IPHONE/IPOD/BLUETOOTH™ COMPONENT
PLAYING BACK TUNES FROM YOUR iPhone/iPod/
Bluetooth™ COMPONENT
Once you have connected an optional Yamaha Universal Dock for iPod (such as the YDS-12), Wireless System for iPod
(YID-W10), or Bluetooth Wireless Audio Receiver (YBA-10) to the DOCK jack on the rear panel of this unit, you can
enjoy playback of your iPhone/iPod or Bluetooth component using the remote control supplied with this unit.
Such as the
YDS-12
(R-S700)
YID-W10
YBA-10
Position the connected
device as far as possible
from the unit.
Video in
TV
Model
(As of July 2010)
• YDS-12
• YDS-11
• YDS-10
Supported iPhone/iPod
(As of July 2010)
Remarks
Bluetooth Wireless Audio
Receiver
YID-W10
YBA-10
Only audio
Only audio
• Remote control
• Zone 2 Remote control
(R-S700 only)
• iPhone/iPod connected to the
dock
• iPhone/iPod connected to the
YID-W10 transmitter
• Remote control
• Zone 2 Remote control
(R-S700 only)
Bluetooth components
• iPod touch
• iPod (4th Gen/
5th Gen/
classic)
• iPod nano
• iPod touch
• iPhone
• iPod (5th Gen/ • iPhone 3G
classic)
• iPhone 3GS
• iPod nano
This unit can play back Audio and video
Operated by
Wireless System for iPod
•
•
•
•
iPod mini
iPhone
iPhone 3G
iPhone 3GS
• Only the R-S700 supports video
output.
• The YDS-10 does not support
video playback.
• iPhone/iPod charging also
supported.
• The YDS-10/YDS-11 does not
support iPhone connection.
iPhone/iPod charging also
supported.
CAUTION
To prevent accidents, unplug the power cable of this unit before connecting a Universal Dock for iPod, a Wireless
System for iPod or a Bluetooth Wireless Audio Receiver.
Note
If the iPhone connected to the YID-W10 receives a call while this unit is in standby mode, the unit turns on automatically and the
ringtone is heard through this unit. If you do not want this unit to turn on when a call is received, set the iPhone to silent mode.
35 En
BASIC
OPERATION
Universal Dock for iPod
PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
Using a Universal Dock for iPod
■ Controlling your iPhone/iPod
After setting your iPhone/iPod in your dock, rotate the INPUT selector on the front panel (or press DOCK on the remote
control) to select DOCK as the input source to play your iPhone/iPod.
DOCK
DOCK
/
INFO
MENU/ Ee / b / a
ENTER
B
MENU/ Ee / b / a
ENTER
C
While viewing the information displayed on your iPhone/iPod, use the following remote control buttons to operate
(playback, pause, skip, etc.) your iPhone/iPod.
Remote control
Zone 2 remote control
(R-S700 only)
MENU
MENU
Displays the menu.
ENTER
ENTER
• If an item is selected: Confirms the item and displays the next screen.
• If a song is selected: Plays the selected song.
Operation
B
Scroll up.
C
Scroll down.
Ee
Ee
• If a song is playing: Pauses the song.
• If a song is paused: Plays the song.
a
a
• If a song is playing or paused: Skips to the beginning of the next song.
• If pressed and held: Searches forward.
b
b
• If a song is playing or paused: Skips to the beginning of the current song.
• Pressing repeatedly skips one song backwards with each press.
• If pressed and held: Searches backward.
*
*
INFO*
Switches between shuffle modes (Off → Songs → Albums → Off).
Switches between repeat modes (Off → One → All → Off).
Switches between items displayed on the front panel display of this unit (Song
number and elapsed time → Songs → Artists → Albums → Song number and
elapsed time).
Notes
• “*” indicates buttons that can be used to control the Main zone only.
• Some shuffle modes and repeat modes may not be available depending on the model or the software version of your iPhone/iPod.
y
When this unit is turned on or is in standby mode, your iPhone/iPod can be charged automatically if it is connected to a Universal Dock
for iPod. The MAIN ZONE indicator remains brightly lit when an iPhone/iPod is being charged.
■ Playing videos from your iPhone/iPod (R-S700 only)
If a video monitor, such as a TV, is connected to this unit’s iPod VIDEO jack using a composite video cable, you can use
the video monitor to watch videos stored on or streamed from your iPhone/iPod.
Note
iPhone/iPod operation screens are not displayed on the video monitor.
36 En
PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
Using a Wireless System for iPod
By connecting a Wireless System for iPod to this unit, you
can play songs on your iPhone/iPod and listen to them
using a wireless connection.
y
You can use the remote control to control the iPhone/iPod. For
more information, see page 36.
Note
When playing an iPhone/iPod using a Wireless System for iPod,
playback information is not displayed on the front panel display.
YID-W10 receiver
■ Establishing a wireless connection
Once the iPhone/iPod is connected to the YID-W10
transmitter and playback begins, it takes about 5 seconds
for audio to be heard. During this time the wireless
connection between the YID-W10 transmitter and
receiver is established.
The status of the wireless connection between the
YID-W10 transmitter and receiver is indicated by the
respective indicator.
Status of
Connection
YID-W10
receiver
indicator
YID-W10
transmitter
indicator
No connection
Off
Off
Confirming
connection
Green, flashing
Blue, flashing
Connected
Green, lit
Blue, lit
• When playback begins on an iPhone/iPod that is
connected to a YID-W10 transmitter, and if the
YID-W10 transmitter is within range of the YID-W10
receiver, this unit performs as follows:
– If this unit is already turned on when playback
begins: The input source switches to DOCK.
– If this unit is in standby mode when playback
begins: This unit turns on and the input source
switches to DOCK.
• In the following situations, the wireless connection
between the transmitter and receiver is disconnected.
After 30 seconds this unit automatically enters standby
mode.
– The iPhone/iPod is not operated for about 30–120
seconds after the playback is paused.
– The sleep timer of the iPhone/iPod is activated.
– The iPhone/iPod is disconnected from the
YID-W10 transmitter.
– The iPhone/iPod battery level decreases to a level
where it cannot provide enough power to the
YID-W10 transmitter.
– The YID-W10 transmitter is moved outside of the
wireless communication range of the YID-W10
receiver.
– Communication between the YID-W10 transmitter
and receiver becomes disrupted due to interference
from other wireless LAN devices, cordless
telephones, microwave ovens, etc.
y
These features can be disabled by setting “Interlock” to “OFF” in
the Option menu (see page 42).
• Adjusting the volume on the iPhone/iPod also adjusts
the volume of this unit. The iPhone/iPod can increase
the volume to up to 0 dB (or the value set for the
“MaxVol” setting in the Option menu). To further
increase the volume, adjust the volume using this unit’s
VOLUME control or the remote control.
y
• When this unit is turned on or is in standby mode, your iPhone/
iPod can be charged automatically if the YID-W10 transmitter
connected to your iPhone/iPod is stationed in the YID-W10
receiver. The MAIN ZONE indicator remains brightly lit when
an iPhone/iPod is being charged.
• Refer to the operating instructions of the YID-W10 for more
information.
Note
When the iPhone/iPod is used in Zone 2, these features are not
available.
37 En
BASIC
OPERATION
YID-W10
transmitter
■ Controlling this unit with your iPhone/
iPod
PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
Using a Bluetooth Wireless Audio
Receiver
4
Press B / C on the remote control to select
“Pairing”, and then press ENTER.
“Searching...” is displayed and pairing begins.
Note
This unit supports A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio and Video Remote Control Profile) of the
Bluetooth profile.
■ Pairing Bluetooth™ components
MEMORY
INPUT selector
y
To cancel pairing, press RETURN on the remote control.
5
Make sure the Bluetooth component
recognizes the Bluetooth Wireless Audio
Receiver.
When the component is recognized, it will be
displayed in the Bluetooth component list, for
example as “YBA-10 YAMAHA”.
6
Select the Bluetooth Wireless Audio
Receiver from the Bluetooth component list,
and enter a pass key “0000” using the
Bluetooth component.
When pairing is complete, “Completed” is displayed
on the front panel display.
To exit the Option menu, press OPTION on the
remote control.
DOCK
OPTION
B/C
ENTER
RETURN
Be sure to pair the Bluetooth Wireless Audio Receiver and
the Bluetooth component when connecting for the first
time or when settings have been deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
Note
The Bluetooth Wireless Audio Receiver can be paired with up to
eight Bluetooth components. When the ninth device is paired, the
pairing settings for the device which has not been used for the
longest period of time will be deleted.
1
Rotate the INPUT selector on the front panel
(or press DOCK on the remote control) to
select DOCK as the input source.
2
Turn on the Bluetooth component you want
to pair and set it to pairing mode.
3
Press OPTION on the remote control.
The Option menu for DOCK displayed (see page 40).
38 En
y
When the input source is set to DOCK, you can also begin pairing
by pressing and holding MEMORY on the front panel (or
ENTER on the remote control).
PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
■ Playing back BluetoothTM components
MEMORY
3
Press B / C on the remote control to select
“Connect”, and then press ENTER.
When wireless connection is complete, “Connected”
is displayed on the front panel display.
To exit the Option menu, press OPTION on the
remote control.
INPUT selector
Note
DOCK
OPTION
4
When pairing is complete, carry out the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component.
When the wireless connection is complete, you can enjoy
playback from Bluetooth components.
Operate the Bluetooth component for
playback.
While the Bluetooth component is playing,
“BLUETOOTH” is displayed on the front panel
display.
Note
Depending on the Bluetooth component, a wireless connection is
established automatically or when the Bluetooth component is
operated. In these cases, it is not necessary to carry out the
following procedure.
1
Rotate the INPUT selector on the front panel
(or press DOCK on the remote control) to
select DOCK as the input source.
2
Press OPTION on the remote control.
The Option menu for DOCK displayed (see page 40).
Note
To disconnect a wireless connection, repeat these steps and select
“Disconnect” in step 3.
y
When the input source is set to DOCK, you can also establish a
wireless connection by pressing MEMORY on the front panel (or
ENTER on the remote control).
39 En
BASIC
OPERATION
B/C
ENTER
“Not found” is displayed if there is a connection error. Check that
the following conditions have been satisfied, and try to establish a
wireless connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 32 feet/10 meters of the
Bluetooth wireless audio receiver.
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
The Option menu allows you to configure various settings for each input source and recall those settings automatically
when an input source is selected. Also, you can view the signal information for certain input sources.
The procedure for setting the Option menu items is described below.
5
To exit the Option menu, press OPTION on
the remote control.
To return to the previous menu, press RETURN on
the remote control.
Note
INPUT selector
Input selector
buttons
If B / C / D / E on the remote control or other buttons do not
work after closing the Option menu, rotate the INPUT selector on
the front panel (or press one of the input selector buttons on the
remote control) to select the current input source again.
Option menu items
The following menu items are provided for each input
source.
Input source
OPTION
B/C/D/E
ENTER
PHONO, CD, TAPE 1,
LINE 1-3
Volume, Zone2 Volume*1, Trigger
Out*1
TUNER
Volume, Zone2 Volume*1, Trigger
Out*1, FM Mode, Auto Preset, Clr
All Preset
SIRIUS
Volume, Zone2 Volume*1, Trigger
Out*1, Parental Lock
DOCK (iPhone/iPod)
Volume, Zone2 Volume*1, Trigger
Out*1, Interlock*2
DOCK (Bluetooth)
Volume, Zone2 Volume*1, Trigger
Out*1, Connect, Disconnect, Pairing
RETURN
1
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
Press OPTION on the remote control.
Note
If the input source is changed while the Option menu is displayed,
the front panel display exits the Option menu and the display for
the selected input source is displayed.
3
Press B / C on the remote control to select
the desired menu item, and then press
ENTER.
4
Press B / C / D / E on the remote control to
change the settings.
y
For certain menu items, you must press ENTER to save the new
setting.
40 En
Menu items
Notes
*1
“Zone2 Volume” and “Trigger Out” are available on the R-S700
only.
*2 “Interlock” is displayed in the Option menu only when using a
Wireless System for iPod.
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Details of the menu items are as follows. The
configuration will be reflected to the input source
currently selected.
y
The default settings are marked with “*”.
Volume
Submenus:
MaxVol, IniVol
Adjustable range
(MaxVol):
–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Adjustable range
(IniVol):
Off*, Mute, –89.5dB to +16.5dB (0.5 dB step)
Sets items for volumes.
MaxVol (Maximum volume)
Sets the maximum volume level so that the volume will not
be accidentally increased above a certain level. For
example, you can adjust the volume between –89.5 dB and
–5.0 dB (or Mute) when you set this parameter to “–5.0dB”.
The volume can be increased to the maximum level when
this parameter is set to +16.5 dB (default).
IniVol (Initial volume)
Sets the volume at the time this unit is turned on. When
this parameter is set to “Off”, the volume level used when
this unit was set to standby is applied.
Note
Zone2 Volume (R-S700 only)
Submenus:
Adjustable range
(MaxVol):
Adjustable range
(IniVol):
MaxVol, IniVol
–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Off*, Mute, –89.5dB to +16.5dB (0.5 dB step)
Sets the maximum volume level and initial volume level
of Zone 2.
MaxVol (Maximum volume)
Sets the maximum volume level for Zone 2. Refer to
“MaxVol (Maximum volume)” above.
IniVol (Initial volume)
Sets the volume at the time Zone 2 is turned on. Refer to
“IniVol (Initial volume)” above.
If “MaxVol” is set to a value lower than the “IniVol” setting, the
setting for “MaxVol” overrides the “IniVol” setting. For
example, if you set “MaxVol” to “–30.0dB” and “IniVol” to
“0.0dB”, the volume is automatically set to “–30.0dB” the next
time this unit is turned on.
Trigger Out (R-S700 only)
Submenu:
Choices:
Mode
Power*, Source, Manual
Use this feature to select the functions of the TRIGGER
OUT jack of this unit.
Power
Select this setting to send the voltage signals while the
selected zone is turned on.
Source
Select this setting to send the voltage signals while the
input source is selected.
Manual
Select this setting to send the voltage signals manually.
Note
The settings that are available depend on the mode (Power,
Source, or Manual) that is selected.
Power: Zone
Source: Zone and Output level for each input source
Manual: Manual test
Zone
Choices:
All*, Main, Zone 2
Select the zone to apply the setting you selected in
“Mode”.
All
The “Mode” setting is applied to the Main zone and
Zone 2.
Main
The “Mode” setting is applied to the Main zone only.
Zone 2
The “Mode” setting is applied to Zone 2 only.
y
The “ZONE 2” indicator on the front panel display flashes when
the Zone2 volume is adjusted.
41 En
ADVANCED
OPERATION
If “MaxVol” is set to a value lower than the “IniVol” setting, the
setting for “MaxVol” overrides the “IniVol” setting. For
example, if you set “MaxVol” to “–30.0dB” and “IniVol” to
“0.0dB”, the volume is automatically set to “–30.0dB” the next
time this unit is turned on.
Note
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Output level for each input source
Interlock
Choices:
Choices:
High*, Low
Select the function of the TRIGGER OUT jack when
the corresponding input source is selected.
High
Send the voltage signals when you select the input
source you set in “Source”.
Low
Stop sending the voltage signals when you select the
input source you set in “Source”.
ON
OFF
Manual test (Manual)
Choices:
High*, Low
Confirm that the component connected to the
TRIGGER OUT jack operates when voltage signals
are sent to the component. This setting is available
only when “Mode” is set to “Manual”.
High
Send the voltage signals.
Low
Stop sending the voltage signals.
FM Mode
Choices:
STEREO*, MONO
Sets the FM broadcast receiving mode.
“FM Mode” is displayed in the Option menu only when
TUNER is selected as the input source.
STEREO Receives in automatic stereo mode by priority.
MONO Receives in monaural mode. You can get a
better reception in monaural mode.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (see page 22).
“Auto Preset” is displayed in the Option menu only when
TUNER is selected as the input source.
Clr All Preset
Clears all preset stations (see page 25).
“Clr All Preset” is displayed in the Option menu only
when TUNER is selected as the input source.
Parental Lock
Sets the Parental Lock (see page 32).
“Parental Lock” is displayed in the Option menu only
when SIRIUS is selected as the input source.
42 En
ON*, OFF
When an iPhone/iPod is connected to this unit wirelessly
using a Wireless System for iPod, the iPhone/iPod can be
used to turn this unit on, set it to standby mode or select
DOCK as the input source.
“Interlock” is displayed in the Option menu only when
using a Wireless System for iPod and DOCK is selected as
the input source.
This unit responds to certain iPhone/iPod
operations.
Disables this feature.
Connect/Disconnect
Connects to or disconnects from a Bluetooth component
(see page 39).
“Connect/Disconnect” is displayed in the Option menu
only when DOCK (Bluetooth) is selected as the input
source.
Pairing
Pairs the Bluetooth Wireless Audio Receiver and a
Bluetooth component (see page 38).
“Pairing” is displayed in the Option menu only when
DOCK (Bluetooth) is selected as the input source.
ADVANCED SETUP
ADVANCED SETUP
■ ADVANCED SETUP menu parameters
Change the initial settings to reflect the needs of your
listening environment.
y
Changing the ADVANCED SETUP
menu parameters
The default settings are marked with “*”.
The ADVANCED SETUP menu is displayed in the front
panel display.
REMOTE ID
Choices: ID1, ID2*
Changes the remote control ID of this unit.
• Select ID1 to operate this unit using an alternative
code.
• Select ID2 to operate this unit using the default code.
y
• Audio output is muted while setting parameters in the
ADVANCED SETUP menu.
• While setting parameters in the ADVANCED SETUP menu,
most controls on the front panel are disabled; only MAIN
ZONE A, the INPUT selector and FM MODE/INFO are
operational.
Note
The remote control’s ID (see page 44) must be set to the same ID
as this unit.
SR PIN (SIRIUS Personal Identification Number)
Choices: CANCEL*, RESET
Resets the Parental Lock code used to lock/unlock
SIRIUS satellite radio channels.
MAIN ZONE A
Note
Note
If “YES” is selected the parameters are reset the next time you
turn on the power of this unit.
INPUT selector
1
Press and hold FM MODE/INFO on the front
panel, and then press MAIN ZONE A.
This unit turns on, and the ADVANCED SETUP
menu is displayed on the front panel display.
2
Rotate the INPUT selector on the front panel
to select the parameter you want to change.
See “ADVANCED SETUP menu parameters” on
page 43 for a complete list of available parameters.
3
Press FM MODE/INFO on the front panel
repeatedly to change the selected parameter
setting.
To change other settings, repeat steps 2 and 3.
4
Press MAIN ZONE A to set this unit to
standby mode to confirm your setting.
When the POWER MANAGEMENT switch is set to OFF, “APD
TIMER -OFF” is displayed.
INITIALIZE
Choices: NO*, YES
Resets all parameters to their factory presets.
• Select NO to cancel without resetting all parameters to
their factory presets.
• Select YES to reset all parameters to their factory
presets.
FM MODE/INFO
Note
The settings you made take effect the next time you turn on this
unit.
43 En
ADVANCED
OPERATION
APD (Automatic Power Down) TIMER
Choices: 4H (4 hours), 8H* (8 hours), 12H (12 hours)
When the POWER MANAGEMENT switch on the rear
panel of this unit (see page 7) is set to ON, this unit’s Main
zone and Zone 2 automatically enters standby mode if this
unit is not operated for the specified amount of time.
ADVANCED SETUP
Switching the remote control ID
When using multiple Yamaha receivers or amplifiers with
the same default code setting, you may unintentionally
operate those components simultaneously. In this case, set
one of the alternative codes for this unit to operate this
unit separately.
1
2
ID
ID
1
2
• Switching to ID1
Press and hold the ID button and the numeric button
“1” on the remote control together for about 3 seconds.
• Switching to ID2
Press and hold the ID button and the numeric button
“2” on the remote control together for about 3 seconds.
*
Remote control ID*
(this unit’s setting)
Function
ID1
To operate this unit using
an alternative code.
ID2
(default setting)
To operate this unit using
the default code.
When you change the remote control ID, you must
change the remote control ID of this unit (see page 43).
Note
If the remote control batteries are weak or removed, the remote
control ID will switch to the default setting (ID2). In this case,
replace the batteries and set the remote control ID again.
44 En
ZONE 2
ZONE 2
Connecting Zone 2 components
This unit allows you to configure a multi-room audio system. The Zone 2 feature enables you to set this unit to reproduce
separate input sources in the main room and in Zone 2 (the second room) simultaneously. You can control this unit from
the second room using the supplied remote control.
The R-S700 can also be operated using the supplied Zone 2 remote control.
You need the following additional equipment to use the multi-room system of this unit:
• An infrared signal receiver for the second room.
• An infrared emitter for the main room. This emitter transmits the infrared signals sent by the remote control in Zone 2
to the components in the main room.
• An amplifier and speakers for the second room.
y
Some Yamaha models are able to connect directly to the REMOTE OUT jack on the rear panel of this unit. If you own one of these
products, you may not need to use an infrared emitter. Up to six Yamaha components can be connected as shown below.
REMOTE
REMOTE
IN
Infrared signal
receiver
REMOTE
IN
OUT
OUT
Yamaha component
This unit
REMOTE
IN
OUT
Yamaha component
■ Multi-room configuration and connections
The following illustration shows an example of a multi-room system configuration and connections.
ADVANCED
OPERATION
Amplifier
CD changer
(or other components)
This unit
Zone 2
Remote control
(R-S700 only) Infrared signal
receiver
Infrared emitter
Main room (Main Zone)
Second room (Zone 2)
y
Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with
your nearest authorized Yamaha dealer or service center for the Zone 2 connections that best meet your requirements.
Note
If you want to adjust the Zone 2 volume level by using the amplifier in the second room, we recommend setting the Zone 2 volume level
to or near 2.5 dB.
45 En
ZONE 2
■ Using the remote control
Controlling Zone 2
Use the supplied remote control, Zone 2 remote control
(R-S700 only) or front panel to control the input source or
adjust the sound output level of Zone 2 independently of
the listening conditions in the main room.
*
Sound output level can be adjusted on the R-S700 only.
1
2
MAIN/
ZONE 2
Note
When using the R-S500, follow the procedure described in
“Using the remote control” and “Using the front panel”.
■ Using the Zone 2 remote control (R-S700
only)
1
Change the zone that is operated by the
remote control.
• To control the Main zone
Press and hold the MAIN/ZONE 2 button and the
numeric button 1 on the remote control together for
about 3 seconds.
• To control Zone 2
Press and hold the MAIN/ZONE 2 button and the
numeric button 2 on the remote control together for
about 3 seconds.
2
Use the remote control as desired.
For information about the buttons that can be used to
control Zone 2, see “Remote control” on page 8.
Buttons that can be used to control Zone 2 are
indicated by “
” on page 8.
(Zone 2 on)
1
Press
(Zone 2 on) on the Zone 2 remote
control to turn on Zone 2.
2
Use the Zone 2 remote control as desired.
For information about each of the buttons on the
Zone 2 remote control, see “Zone 2 remote control
(R-S700 only)” on page 10.
■ Using the front panel
ZONE 2 CONTROL
ZONE 2
46 En
1
Press ZONE 2 on the front panel to turn on
Zone 2.
2
Press ZONE 2 CONTROL on the front panel
to control Zone 2.
The ZONE 2 indicator on the front panel display
blinks for about 10 seconds. During this time, you
can control Zone 2 from the front panel.
For information about the buttons and controls that
can be used to control Zone 2, see “Front panel” on
page 4. Buttons and controls that can be used to
control Zone 2 are indicated by “
” on page 4.
REMOTE CONTROL FEATURES
REMOTE CONTROL FEATURES
The remote control can be used to control not only this unit, but also seven other audio-visual components (TV, DVD
player, VCR, etc.) made by Yamaha and other manufacturers. To control other components with this unit’s remote
control, you must first configure the remote control to control each component (see page 49).
Controlling this unit, a TV, or other components
■ Controlling this unit
■ Controlling a TV
To use this unit’s remote control to control your TV,
determine the remote control code that corresponds to
your TV and assign that code to the TV A button or to
another input selector button on the remote control. For
details about assigning remote control codes, see page 49.
*1
OPTION
*2
ADVANCED
OPERATION
*1
TV A
*1
*2
These buttons always control this unit.
These buttons control this unit only when OPTION is pressed.
*2
*1
These buttons control your TV if your TV’s remote control
code has been assigned to an input selector button.
*2 These buttons (described below) control your TV if your TV’s
remote control code has been assigned to the TV A button or to
an input selector button.
TV control button
Function
TV A
Turns the TV on and off.
TV CH +/–
Changes the TV’s channel.
TV VOL +/–
Adjusts the TV’s volume.
TV INPUT
Changes the TV’s input source.
MUTE
Mutes the TV’s audio output.
47 En
REMOTE CONTROL FEATURES
Notes
• When using only one TV: Assign the TV’s remote control code
to the TV A button. The TV control buttons always control your
TV, regardless of the selected input source.
• To use other buttons (*1, above) to control your TV: Assign the
TV’s remote control code to the TV A button, and also to an
input selector button. The TV control buttons always control
your TV, regardless of the selected input source. You can use
the other buttons to operate the TV by first pressing the input
selector button to which the TV is assigned.
• To control more than one TV: Assign one TV to the TV A
button and the other TVs to other input selector buttons. You
can control the other TVs assigned by first pressing the input
selector button to which a TV is assigned. You can use the TV
control buttons to control the first TV whenever an input
selector button with no TV assigned to it is selected.
■ Controlling other components
To use this unit’s remote control to control other
components (DVD player, VCR, etc.), determine the
remote control code that corresponds to the component
and assign that code to the desired input selector button on
the remote control. For details about assigning remote
control codes, see page 49.
To switch the input source and control the corresponding
component, press the input selector button on the remote
control, and then press the desired control button.
y
If you are unable to operate this unit after using the remote
control to operate an external component, press RECEIVER and
then try operating the remote control again.
[1]
Input selector
buttons
[2]
[7]
[3]
[4]
[8]
[5]
[6]
[9]
RECEIVER
48 En
The following table is an example of the component
features that may be controlled using this remote control.
Note that some features of the corresponding component
may not be supported, and that some buttons may not
correctly control the selected component.
Remote control
Feature (example)
[1] SOURCE A
Power
[2] TOP MENU
Title
[3] B
Up
C
Down
D
Left
E
Right
ENTER
Enter
[4] RETURN
Return
[5] DISC SKIP/REC
Disc skip (player)
Rec (recorder)
p
Play
w
Search backward
f
Search forward
e /A/B
Pause (player, recorder)
Deck A/B (tape deck)
b /DIR A
Skip backward (player, recorder)
Direction A (tape deck)
a /DIR B
Skip forward (player, recorder)
Direction B (tape deck)
s
Stop
[6] 1-9, 0, +10
Numeric buttons
[7] MENU
Menu
[8] DISPLAY
Display
[9] ENTER
Title/Index
REMOTE CONTROL FEATURES
■ Assigning remote control codes
Configuring the remote control
To use this unit’s remote control to control other
components (TV, DVD player, VCR, etc.), determine the
remote control code that corresponds to the component
and assign that code to the desired input selector button on
the remote control. Remote control codes are listed in the
“LIST OF REMOTE CONTROL CODES” at the end of
this manual.
Input selector
buttons
1
Refer to the “LIST OF REMOTE CONTROL
CODES” at the end of this manual and
determine the remote control code that
corresponds to each of your components.
Components are listed by category (TV, VCR, DVD
player, etc.) and manufacturer.
2
Press and hold CODE SET on the remote
control for more than 3 seconds.
3
Press an input selector button on the remote
control to select the input source you want to
configure.
You can also press TV A to configure the TV control
buttons (see page 47).
4
Use the numeric buttons on the remote
control to enter the four-digit remote control
code corresponding to the component you
want to assign.
When the component has been assigned, “OK” is
displayed on the front panel display. If an error
occurs, “NG” is displayed.
OPTION
TV A
Numeric
buttons
CODE SET
Notes
The remote control is configured at the factory as shown
below.
Button
Component
category
Manufacturer
Default
code
CD
CD player
Yamaha
5082
TAPE
TAPE deck
Yamaha
5087
PHONO
—
—
—
LINE 1
CD recorder
Yamaha
5083
LINE 2
DVD player
Yamaha
2082
LINE 3
Blu-ray disc
player
Yamaha
2064
TV A
—
—
—
Note
If you cannot operate a Yamaha component when the remote
control is configured using the remote control code listed above,
refer to the “LIST OF REMOTE CONTROL CODES” at the end
of manual and try assigning a different Yamaha remote control
code.
• If the manufacturer of your component has more than one
remote control code, assign each code one at a time until you
find the code that successfully controls your component.
• You can only assign one remote control code to each input
selector button.
■ Resetting the remote control
Use this procedure to reset the remote control codes
assigned to each input selector to the factory default (see
“Default remote control configuration” above).
Note
This procedure will be cancelled if you do not press any buttons
for 1 minute. If the procedure is cancelled, repeat from step 1 if
necessary.
1
Press and hold CODE SET on the remote
control for more than 3 seconds.
2
Press OPTION on the remote control.
3
Use the numeric buttons on the remote
control to enter “9981”.
The remote control code assigned to each input
selector button will be reset to its factory default
code.
49 En
ADVANCED
OPERATION
■ Default remote control configuration
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or
if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and contact the nearest
authorized Yamaha dealer or service center.
■ General
Problem
This unit fails to turn
on.
No sound
The sound suddenly
goes off.
Only the speaker on
one side can be
heard.
There is a lack of bass
and no ambience.
50 En
Cause
Remedy
See
page
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly.
The impedance setting is incorrect.
Set the impedance to match your speakers.
13
The protection circuitry has been activated
because of a short circuit, etc.
Check that the speaker wires are not touching each
other and then turn the power of this unit back on.
12
The IMPEDANCE SELECTOR switch on
the rear panel is not set to either end.
Set the IMPEDANCE SELECTOR switch to either
end when the power of this unit is turned off.
13
This unit has been exposed to a strong
external electric shock (such as lightning
or strong static electricity).
Set this unit to standby mode, disconnect the power
cable, plug it back in after 30 seconds, then use it
normally.
—
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
12
No appropriate input source has been
selected.
Select an appropriate input source with the INPUT
selector on the front panel (or one of the input
selector buttons on the remote control).
16
The SPEAKERS A/B switches are not set
properly.
Turn on the corresponding SPEAKERS A or
SPEAKERS B.
16
Speaker connections are not secure.
Secure the connections.
12
Output has been muted.
Turn off the mute.
8
The MaxVol or IniVol setting is set too
low.
Set the setting to a higher value.
The component corresponding to the
selected input source is turned off or is not
playing.
Turn the component on and make sure it is playing.
The protection circuitry has been activated
because of a short circuit, etc.
Check that the IMPEDANCE SELECTOR switch is
set to the correct position.
13
Check that the speaker wires are not touching each
other and then turn the power of this unit back on.
12
This unit has become too hot.
Make sure the openings on the top panel are not
blocked.
—
The automatic power down function has
turned this unit off.
Change the automatic power down setting (“APD
TIMER” in the Advanced Setup menu) to a longer
setting, or disable the automatic power down function
by setting the POWER MANAGEMENT switch on
the rear panel to OFF.
43
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
12
Incorrect setting for the BALANCE
control.
Set the BALANCE control to the appropriate
position.
18
The + and – wires are connected in
reverse at the amplifier or the speakers.
Connect the speaker wires to the correct + and –
phase.
12
—
40
—
TROUBLESHOOTING
Problem
Cause
Remedy
See
page
Incorrect cable connections.
Connect the audio plugs firmly. If the problem
persists, the cables may be defective.
12
No connection from the turntable to the
GND terminal.
Make the GND connection between the turntable and
this unit.
12
The volume level is
low while playing a
record.
The record is being played on a turntable
with an MC cartridge.
The turntable should be connected to this unit through
the MC head amplifier.
The volume level
cannot be increased,
or the sound is
distorted.
The component connected to the TAPE
REC or LINE 1 REC output jacks of this
unit is turned off.
Turn on the power of the component.
The sound is
degraded when
listening with the
headphones
connected to the CD
player or the tape
deck connected to
this unit.
The power of this unit is turned off, or this
unit is set to standby mode.
Turn on the power of this unit.
The sound level is
low.
The loudness control function is
operating.
Turn down the volume, set the LOUDNESS control
to the FLAT position, and then adjust the volume
again.
The input source
cannot be changed
although the INPUT
selector is rotated.
The CD DIRECT AMP switch is turned
on (R-S700 only).
Turn off the CD DIRECT AMP switch.
Using the BASS,
TREBLE, BALANCE
and LOUDNESS
controls does not
affect the tonal
quality.
The CD DIRECT AMP (R-S700 only) or
the PURE DIRECT switch is turned on.
The CD DIRECT AMP or the PURE DIRECT switch
must be turned off to use those controls.
A “humming” sound
can be heard.
—
—
16
18
17
17
ADDITIONAL
INFORMATION
51 En
TROUBLESHOOTING
■ Tuner
Problem
FM
FM/
AM
AM
52 En
Cause
Remedy
See
page
FM stereo
reception is
noisy.
The particular characteristics of the FM
stereo broadcasts being received may
cause this problem when the transmitter is
too far away or the antenna input is poor.
Check the antenna connections.
Try using a high-quality directional FM antenna.
14
Switch to monaural mode.
21
There is
distortion, and
clear reception
cannot be
obtained even
with a good FM
antenna.
There is multipath interference.
Adjust the antenna position to eliminate the multipath
interference.
The desired
station cannot
be tuned in
with the
automatic
tuning method.
The signal is too weak.
NO PRESETS
is displayed.
No preset stations are registered.
Register stations you want to listen to as preset
stations before operation.
WRONG
STATION is
displayed.
An invalid FM/AM frequency has been
input.
Input a frequency that can be received.
The desired
station cannot
be tuned in
with the
automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections and orient
it for the best reception.
Automatic
station preset
does not work.
Automatic station preset is not available
for AM stations.
Use manual station preset.
There are
continuous
crackling and
hissing noises.
The noises may result from lightning,
fluorescent lamps, motors, thermostats or
other electrical equipment.
Try using an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
There are
buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV set.
—
Try using a high-quality directional FM antenna.
14
Try using the manual tuning method.
21
22
21
—
Try using the manual tuning method.
21
23
—
—
TROUBLESHOOTING
■ SIRIUS Satellite RadioTM
The following messages may be displayed on the front panel display in certain situations.
Message
Status/Cause
Remedy
See
page
ANTENNA ERROR
The antenna is not connected to the
SiriusConnect tuner properly.
Check the connection of the antenna and
SiriusConnect tuner.
27
SIRIUS LOADING
This unit is communicating with the
SiriusConnect tuner.
The message disappears normally within several tens
of seconds.
—
CHECK SR TUNER
The SiriusConnect tuner is not connected
to the SIRIUS jack of this unit correctly.
Check the connection of the SiriusConnect tuner and
this unit.
27
The SiriusConnect tuner is not connected
to the AC wall outlet.
Connect the power cable of the SiriusConnect tuner
to the AC wall outlet.
—
NOT SUPPORTED
This unit does not support the connected
SIRIUS Satellite Radio tuner.
Connect the SiriusConnect tuner that this unit
supports,
—
ACQUIRING
The signal is too weak.
Adjust the orientation of the antenna of the
SiriusConnect tuner. Check the antenna reception
level from the Antenna information on the front
panel display.
34
The SiriusConnect tuner is updating the
channel list.
Wait until the updating is complete.
The period of the subscription is end.
Contact SIRIUS Satellite Radio to renew the
subscription.
F/W UPDATING
The SiriusConnect tuner is updating the
firmware.
Wait until the updating is complete.
CALL SIRIUS
(CALL 888-539SIRIUS TO
SUBSCRIBE)
The selected channel is not subscribed.
Contact SIRIUS Satellite Radio to subscribe the
selected channel.
URL: https://activate.siriusradio.com/
Phone: 1-888-539-SIRIUS (1-888-539-7474)
—
Select another channel.
28
UPDATING
The subscription information is updated.
INVALID
The selected channel is currently out of
service.
NOT AVAILABLE
The operation you made is not available.
—
—
—
Select another channel.
28
—
53 En
ADDITIONAL
INFORMATION
SUB UPDATED
—
TROUBLESHOOTING
■ iPhone/iPod
The following messages may be displayed on the front panel display in certain situations.
Message
Connect error
Status/Cause
There is a problem with the signal path
from your iPhone/iPod to the unit.
Remedy
See
page
Turn off the unit and reconnect the Universal Dock
for iPod to the DOCK jack of the unit.
35
Remove your iPhone/iPod from the Universal Dock
for iPod and then place it back in the dock.
35
Unknown iPod
The iPhone/iPod being used is not
supported by the unit.
Connected
Your iPhone/iPod is properly placed in
the Universal Dock for iPod.
—
Your iPhone/iPod is properly placed in
the Wireless System for iPod and
connected with this unit via wireless
transmission.
37
Your iPhone/iPod is removed from the
Universal Dock for iPod.
—
Your iPhone/iPod is disconnected with
this unit via wireless transmission.
—
Disconnected
The wireless connection is poor.
Problem
Cause
When using the
Universal Dock for
iPod:
Your iPhone/iPod is
not being charged
even though it is
connected to the
Universal Dock for
iPod.
The iPhone/iPod is not connected
securely.
When using the
Wireless System for
iPod:
Your iPhone/iPod is
not being charged
even though the YIDW10 transmitter
connected to your
iPhone/iPod is
stationed in the YIDW10 receiver.
The YID-W10 transmitter is not stationed
securely in the YID-W10 receiver.
54 En
Connect an iPhone/iPod supported by the unit.
Place the YID-W10 receiver as far away from this
unit as possible.
Remedy
35
35
See
page
Connect the iPhone/iPod securely to the Universal
Dock for iPod.
—
Station the YID-W10 transmitter connected to your
iPhone/iPod securely in the YID-W10 receiver.
—
TROUBLESHOOTING
■ Bluetooth™
The following messages may be displayed on the front panel display in certain situations.
Message
Status/Cause
Remedy
See
page
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of pairing.
—
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of establishing a connection.
—
Completed
The pairing is completed.
—
Canceled
The pairing is canceled.
—
Connected
The connection between the Bluetooth
Wireless Audio Receiver and the
Bluetooth component is established.
—
The Bluetooth component is
disconnected from the Bluetooth Wireless
Audio Receiver.
—
Searching...
Disconnected
Not found
The Bluetooth component is not found.
Pairing may not have been achieved.
During pairing:
– pairing must be performed on the Bluetooth
component and this unit simultaneously. Check if
the Bluetooth component is in pairing mode.
During connecting:
– check if the Bluetooth component is turned on.
– check if the Bluetooth component is within 10 m
(32 feet) of the Bluetooth Wireless Audio
Receiver.
—
Try pairing again.
38
ADDITIONAL
INFORMATION
55 En
TROUBLESHOOTING
■ Remote control
Problem
The remote control
does not work nor
function properly.
56 En
Remedy
See
page
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel.
11
Cause
Wrong distance or angle.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
The batteries are weak.
Replace all batteries.
The remote control ID and this unit’s ID
do not match.
Switch the remote control ID or this unit’s ID.
The remote control code was not correctly
set.
Try setting another code of the same manufacturer
using “LIST OF REMOTE CONTROL CODES” at
the end of this manual.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Use the supplied remote control for the components.
You did not press the input selector button
corresponding to the component you are
trying to control.
Press the input selector button corresponding to the
component you are trying to control, and then press
the desired remote control button(s).
—
The remote control is not set to the correct
zone.
Set the remote control to the correct zone, the Main
zone or Zone 2, and then operate the remote control.
46
If the remote control batteries are weak or
removed, the remote control ID and zone
will switch to the default settings (ID2 and
Main zone).
Replace all batteries, and then set the remote control
ID and zone again.
—
11
44
49
—
44, 46
SPECIFICATIONS
SPECIFICATIONS
AUDIO SECTION
• Tone control characteristics
BASS
Boost/Cut (50 Hz) ......................................................... ± 10 dB
Turnover Frequency ........................................................ 350 Hz
TREBLE
Boost/Cut (20 kHz) ....................................................... ± 10 dB
Turnover Frequency ....................................................... 3.5 kHz
• Continuous loudness control
Attenuation (1 kHz) ............................................................ –30 dB
• Gain tracking error (0 to –99 dB) ............................... 0.5 dB or less
FM SECTION
• Tuning range
[U.S.A. and Canada models] ........................... 87.5 to 107.9 MHz
[Asia (R-S500 only) and Central/South America models]
................................................. 87.5/87.50 to 107.9/108.00 MHz
[Europe, Russia and Australia models] ....... 87.50 to 108.00 MHz
• 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)
Mono ................................................................ 3.0 µV (20.8 dBf)
• Signal to noise ratio (IHF)
Mono/Stereo .............................................................. 74 dB/70 dB
• Harmonic distortion (1 kHz)
Mono/Stereo ................................................................ 0.3%/0.3%
AM SECTION
• Tuning range
[U.S.A. and Canada models] .............................. 530 to 1710 kHz
[Asia (R-S500 only) and Central/South America models]
.......................................................... 530/531 to 1710/1611 kHz
[Europe, Russia and Australia models] ............... 531 to 1611 kHz
GENERAL
• Power supply
[U.S.A. and Canada models] .............................. AC 120 V, 60 Hz
[Central/South America models]
............................................... AC 110-120/220-240 V, 50/60 Hz
[Australia model] ............................................... AC 240 V, 50 Hz
[Europe and Russia models] ............................... AC 230 V, 50 Hz
[Asia model (R-S500 only)]................... AC 220-240 V, 50/60 Hz
• Power consumption
[R-S700]
[U.S.A. and Canada models] .............................. 270 W, 370 VA
[Other models] ................................................................ 270 W
[R-S500]
[Asia model] .................................................................... 170 W
[Other models] ................................................................ 190 W
• Standby power consumption ....................................... 0.5 W or less
• YID-W10 standby power consumption
(YID-W10 connect) ................................................. 1.2 W or less
• iPod charge power consumption
[R-S700] .................................................................... 40 W or less
[R-S500] .................................................................... 35 W or less
• Maximum power consumption [Central/South America models
only]
[R-S700] (6 Ω , 1 kHz, 10% THD) ..................................... 570 W
[R-S500] (8 Ω , 1 kHz, 10% THD) .................................... 380 W
• Dimensions (W x H x D) ................................ 435 × 151 × 387 mm
(17-1/8" × 6" × 15-1/4")
• Weight
[R-S700] ............................................................ 11.2 kg (24.7 lbs)
[R-S500] ............................................................ 10.2 kg (22.5 lbs)
* Specifications are subject to change without notice.
57 En
ADDITIONAL
INFORMATION
• Minimum RMS output power
[R-S700]
(8 Ω, 20 Hz to 20 kHz, 0.019% THD) .............. 100 W + 100 W
(6 Ω, 20 Hz to 20 kHz, 0.03% THD) ................ 120 W + 120 W
[R-S500]
(8 Ω, 20 Hz to 20 kHz, 0.04% THD) .................... 75 W + 75 W
• Dynamic power per channel (IHF)
(8/6/4/2 Ω)
[R-S700] ..................................................... 140/170/220/290 W
[R-S500] ..................................................... 105/125/150/178 W
• Maximum power per channel [Europe model only]
(1 kHz, 0.7% THD, 4 Ω)
[R-S700] .......................................................................... 160 W
[R-S500] .......................................................................... 105 W
• IEC power [Europe model only]
[R-S700] (1 kHz, 0.019% THD, 8 Ω) ................................ 115 W
[R-S500] (1 kHz, 0.04% THD, 8 Ω) .................................... 84 W
• Power band width
[R-S700] (0.06% THD, 50 W, 8 Ω) .................... 10 Hz to 50 kHz
[R-S500] (0.06% THD, 37.5 W, 8 Ω) ................. 10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
1 kHz, 8 Ω
[R-S700] ................................................................. 240 or more
[R-S500] ................................................................. 150 or more
• Maximum effective output power (JEITA)
[Asia (R-S500 only) and Central/South America models only]
[R-S700] (1 kHz, 10% THD, 8/6 Ω) ........................ 145/170 W
[R-S500] (1 kHz, 10% THD, 8 Ω) .................................. 115 W
• Input sensitivity/Input impedance
PHONO (MM) ....................................................... 3.5 mV/47 kΩ
CD, etc. ................................................................. 200 mV/47 kΩ
[R-S700] MAIN IN .................................................... 1.0 V/47 kΩ
• Maximum input signal
PHONO (MM) (1 kHz, 0.003% THD) ................. 60 mV or more
CD, etc. (1 kHz, 0.5% THD) .................................. 2.2 V or more
• Output level/Output impedance
CD, etc. (Input 1 kHz, 200 mV)
REC .................................................................. 200 mV/1.0 kΩ
CD, etc. (Input 1 kHz, 200 mV, 8 Ω)
PHONES ............................................................ 410 mV/470 Ω
• Frequency response
CD, etc. (20 Hz to 20 kHz) ........................................... 0 ± 0.5 dB
[R-S700] CD, etc., PURE DIRECT on/MAIN IN
(10 Hz to 100 kHz) .................................................... 0 ± 1.0 dB
[R-S500] CD, etc., PURE DIRECT on
(10 Hz to 100 kHz) .................................................... 0 ± 1.0 dB
• RIAA equalization deviation
PHONO (MM) ................................................................. ± 0.5 dB
• Total harmonic distortion
PHONO (MM) to REC
(20 Hz to 20 kHz, 3 V) .......................................... 0.025% or less
[R-S700]
CD, etc. to PRE OUT
(20 Hz to 20 kHz, 1 V) ....................................... 0.005% or less
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 50 W, 8 Ω) ............................. 0.015% or less
[R-S500]
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 37.5 W, 8 Ω) .......................... 0.015% or less
• Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted) .................... 87 dB or more
CD, etc., PURE DIRECT on
(200 mV input shorted) ..................................... 100 dB or more
[R-S700] CD, CD DIRECT AMP on
(200 mV input shorted) ..................................... 107 dB or more
• Residual noise (IHF-A network) ........................................... 30 µV
• Channel separation
CD, etc. (5.1 kΩ input shorted, 1/10 kHz) ........ 65/50 dB or more
LIST OF REMOTE CONTROL CODES
Autovox
TV
A.R. Systems
Acme
Acura
ADC
Admiral
0320
0342
0323, 0343
0337
0054, 0178, 0336,
0337, 0339, 0346,
0347
Advent
0158
Adventura
0057
Adyson
0277, 0282, 0342
Agashi
0277, 0282
Agazi
0337
Aiko
0277, 0282, 0320,
0323, 0342, 0343
Aim
0320
Aiwa
0078, 0379
Akai
0050, 0055, 0109,
0159, 0181, 0277,
0282, 0320, 0323,
0340, 0343, 0349,
0350
Akiba
0320, 0340
Akura
0320, 0323, 0337,
0340
Alaron
0277
Alba
0161, 0277, 0320,
0323, 0340, 0342,
0343, 0344, 0349,
0351, 0372, 0382
Albatron
0140
Alcyon
0171
Alleron
0059
Allorgan
0282
Allstar
0320, 0350
America Action 0179
AMOi
0276
Amplivision
0161, 0282, 0321,
0342
Amstrad
0320, 0323, 0337,
0340, 0343
Amtron
0058
Anam
0179, 0343
Anam National 0052, 0058
Anglo
0323, 0343
Anitech
0171, 0320, 0323,
0337, 0343
Ansonic
0161, 0168, 0320,
0323, 0341, 0343
AOC
0008, 0026, 0050,
0053
Apex
0039, 0111, 0217
Arcam
0277, 0282
Arcam Delta
0342
Aristona
0320, 0349, 0350
Arthur Martin 0321
ASA
0339, 0347
Asberg
0171, 0320, 0350
Astra
0343
Asuka
0277, 0282, 0337,
0340, 0342
Atlantic
0277, 0320, 0342,
0349, 0350
Atori
0323, 0343
Auchan
0321
Audiosonic
0161, 0282, 0320,
0340, 0342, 0343,
0349, 0350
AudioTon
0161, 0282, 0342
Audiovox
0058, 0179, 0194
Ausind
0171
i
0171, 0282, 0337,
0339, 0342
Aventura
0051
Awa
0277, 0282
Axion
0156
Baird
0282
Bang & Olufsen 0180, 0339
Basic Line
0282, 0320, 0323,
0340, 0343, 0350
Bastide
0282, 0342
Baur
0320, 0349
Bazin
0282
Beko
0161, 0269, 0294,
0302, 0311, 0320,
0328, 0351
Belcor
0008
Bell & Howell 0019, 0054
Benq
0097, 0242, 0361
Beon
0320, 0349, 0350
Best
0161
Bestar
0161, 0320, 0350
Binatone
0282, 0342
Blue Sky
0320, 0340
Blue Star
0348
Boots
0282, 0342
BPL
0320, 0348
Bradford
0058, 0179
Brandt
0322, 0345
Brillian
0182
Brinkmann
0320
Brionvega
0320, 0339, 0349,
0350
Britannia
0277, 0282, 0342
Brockwood
0008
Broksonic
0109, 0179
Bruns
0339
BTC
0340
Bush
0269, 0282, 0283,
0304, 0320, 0323,
0328, 0332, 0340,
0343, 0344, 0346,
0348, 0349, 0350,
0372, 0382, 0463,
0470, 0472
Candle
0008, 0026, 0050,
0057
Capsonic
0337
Carena
0320
Carnivale
0050
Carrefour
0344
Carver
0010
Cascade
0320, 0323, 0343
Casio
0367
Cathay
0320, 0349, 0350
CCE
0183, 0282
Celebrity
0055, 0107
Celera
0039
Centurion
0320, 0349, 0350
Century
0339
CGE
0161, 0171
Changhong
0039
Chimei
0273
Cimline
0323, 0343
Citizen
0007, 0008, 0026,
0050, 0058
City
0323, 0343
Clarion
0179
Clarivox
0349
Clatronic
0161, 0171, 0282,
0320, 0323, 0337,
0340, 0342, 0343,
0350, 0351
CMS
0277
CMS Hightec 0282
Coby
0197
Colortyme
0008, 0026
Commercial Solutions
0021
Concerto
0008, 0026
Concorde
0323, 0343
Condor
0161, 0277, 0320,
0323, 0342, 0350,
0351
Contec
0179, 0277, 0323,
0342, 0343, 0344
Contec/Cony 0012, 0058
Continental Edison
0345
Cosmel
0323, 0343
Craig
0058, 0179
Crosley
0010, 0037, 0171,
0339
Crown
0058, 0161, 0171,
0179, 0320, 0323,
0343, 0349, 0350,
0351
CS Electronics 0277, 0340, 0342
CTC Clatronic 0341
CTX
0205
Curtis Mathes 0007, 0008, 0010,
0019, 0021, 0026,
0049, 0050, 0178
CXC
0058, 0179
Cybertron
0340
Cytron
0152
Daewoo
0007, 0008, 0026,
0037, 0053, 0167,
0266, 0275, 0277,
0282, 0315, 0320,
0323, 0331, 0335,
0342, 0343, 0350,
0381, 0465
Dainichi
0277, 0340
Dansai
0277, 0282, 0320,
0337, 0349, 0350
Dantax
0161, 0349
Dawa
0320
Daytron
0007, 0008, 0026,
0323, 0343
De Graaf
0346
Decca
0282, 0320, 0342,
0349, 0350
Dell
0145, 0245
Denver
0358, 0362
Desmet
0320, 0349, 0350
Diamant
0320
Diamond
0277
DiamondVision 0135, 0143
Dimensia
0049
Disney
0219
Dixi
0282, 0320, 0323,
0343, 0349, 0350
Dream Vision 0461, 0498
DTS
0323, 0343
Dual
0282, 0320, 0342
Dual-Tec
0342, 0343
Dumont
0008, 0030, 0062,
0282, 0339, 0341,
0342
Durabrand
0031, 0051, 0179,
0215
Dux
0349
Dwin
0178
Dynatron
0320, 0349, 0350
Dynex
0228, 0231
Elbe
0161, 0168, 0282,
0320
Elcit
0339
Electa
ELECTRO TECH
Electroband
Electrograph
Electrohome
0348
0343
0055, 0107
0176
0008, 0026, 0052,
0055
Element
0230
Elin
0277, 0320, 0323,
0342, 0349, 0350
Elite
0320, 0340, 0350
Elman
0341
Elta
0277, 0323, 0343
Emerson
0000, 0007, 0008,
0012, 0013, 0019,
0026, 0031, 0037,
0051, 0058, 0059,
0161, 0179, 0320,
0339
Emprex
0154
Envision
0008, 0026, 0050
Epson
0155, 0206, 0359
Erres
0320, 0349, 0350
ESA
0051
ESC
0282
Etron
0343
Eurofeel
0282
Euro-Feel
0337
Euroline
0349
Euroman
0161, 0277, 0282
Euromann
0320, 0337, 0342,
0350
Europhon
0277, 0282, 0320,
0341, 0342, 0350
Expert
0321
Exquisit
0320
Fenner
0323, 0343
Ferguson
0322, 0345, 0349
Fidelity
0277, 0320, 0342,
0346
Filsai
0282
Finlandia
0346
Finlux
0171, 0282, 0320,
0339, 0341, 0342,
0349, 0350
FIRST LINE 0342, 0343, 0350
Firstline
0277, 0282, 0320,
0323
Fisher
0019, 0161, 0282,
0339, 0342, 0344,
0351
Flint
0320, 0350
Formenti
0171, 0277, 0336,
0339, 0342, 0349
Formenti/Phoenix 0277
Fortress
0336, 0339
Fraba
0161, 0320
Friac
0161
Frontech
0282, 0323, 0337,
0343, 0346, 0347
Fujitsu
0059, 0069, 0074,
0075, 0282
Fujitsu General 0282
Fujitsu Siemens 0504, 0505, 0507,
0510, 0511
Funai
0051, 0058, 0059,
0112, 0113, 0115,
0118, 0119, 0179,
0337
Futuretech
0058, 0179
Galaxi
0320, 0351
Galaxis
0161, 0320
Gateway
0176, 0177, 0241
GBC
0323, 0343, 0344
GE
0008, 0021, 0023,
0026, 0027, 0031,
0034, 0049, 0052,
0056, 0209
Geant Casino 0321
GEC
0282, 0320, 0342,
0347, 0349, 0350
Geloso
0323, 0343, 0346
General Technic 0323, 0343
Genexxa
0320, 0340, 0347,
0350
GFM
0128, 0227
Giant
0282
Gibralter
0008, 0030, 0050,
0062
GoldHand
0277
Goldline
0320
GoldStar
0007, 0008, 0012,
0026, 0031, 0050,
0053, 0161, 0277,
0282, 0320, 0323,
0342, 0343, 0346,
0349, 0350
Goodmans
0246, 0272, 0282,
0320, 0323, 0337,
0343, 0344, 0349,
0350, 0462, 0473,
0477
Gorenje
0161, 0351
GPM
0340
GPX
0129
Gradiente
0240
Graetz
0347
Granada
0171, 0282, 0320,
0321, 0342, 0344,
0346, 0349, 0350
Grandin
0340, 0343, 0348,
0349
Gronic
0282
Grundig
0160, 0161, 0171,
0310, 0320
Grunpy
0058, 0059, 0179
Haier
0157, 0233
Halifax
0277, 0282, 0337,
0342
Hallmark
0008, 0026, 0031
Hampton
0277, 0282, 0342
Hanseatic
0161, 0168, 0282,
0320, 0323, 0342,
0343, 0344, 0349,
0350
Hantarex
0320, 0323, 0343
Hantor
0320
Harman/Kardon 0010
Harvard
0058, 0179
Harwood
0320, 0323
Havermy
0178
HCM
0282, 0320, 0323,
0337, 0342, 0343,
0348
Hema
0282, 0323
Hewlett Packard 0192
Higashi
0277
HiLine
0320
Hinari
0320, 0323, 0340,
0343, 0344, 0349,
0350
Hisawa
0321, 0340, 0348
Hisense
0247
Hitachi
Hornyphon
Hoshai
Huanyu
Hygashi
Hyper
Hypson
Hyundai
Iberia
ICE
ICeS
Ilo
IMA
Imperial
Indiana
Infinity
InFocus
Ingelen
Ingersol
Initial
Inno Hit
Innovation
Insignia
Inteq
Interactive
Interbuy
Interfunk
International
Intervision
Irradio
Isukai
ITC
ITS
ITT
ITV
Janeil
JBL
JC Penney
JCB
Jensen
JVC
Kaisui
Kamosonic
Kamp
0008, 0012, 0026,
0066, 0084, 0092,
0093, 0120, 0172,
0173, 0255, 0270,
0271, 0282, 0320,
0335, 0338, 0342,
0344, 0346, 0347,
0365, 0382, 0448,
0456, 0467
0320, 0350
0340
0277, 0342
0277, 0282, 0342
0277, 0282, 0323,
0342, 0343
0282, 0320, 0321,
0337, 0342, 0348,
0349, 0350
0141
0320
0277, 0282, 0320,
0323, 0337, 0340,
0342, 0343, 0350
0277
0148, 0153
0058
0161, 0171, 0320,
0347, 0350, 0351
0320, 0349, 0350
0010
0250, 0327, 0363,
0479, 0508
0347
0323, 0343
0153
0171, 0282, 0320,
0323, 0340, 0342,
0343, 0349, 0350
0337, 0343
0131, 0228, 0236,
0238
0030
0161
0323, 0343
0161, 0320, 0339,
0347, 0349, 0350
0277
0161, 0282, 0320,
0337, 0341, 0342
0171, 0320, 0323,
0340, 0343, 0349,
0350
0320, 0340
0282, 0342
0277, 0320, 0340,
0348, 0350
0343, 0347
0320, 0343, 0349
0057
0010
0007, 0008, 0026,
0027, 0049, 0053,
0056
0055, 0107
0008, 0026
0012, 0014, 0015,
0056, 0064, 0065,
0067, 0169, 0174,
0297, 0314, 0344,
0350, 0375
0277, 0282, 0320,
0323, 0340, 0342,
0343, 0348
0342
0277, 0342
Kapsch
Karcher
Kawasho
KEC
Kendo
Kenwood
KIC
Kingsley
KLH
Kloss Novabeam
Kneissel
Kolster
Konka
Korpel
Korting
Kosmos
Koyoda
KTV
Kyoto
Lasat
Lenco
Lenoir
Leyco
LG
LG/GoldStar
Liesenk
Liesenkotter
Life
Lifetec
Lloyds
Loewe
Loewe Opta
Logik
Luma
Lumatron
Lux May
Luxman
Luxor
LXI
M Electronic
MAG
Magnadyne
Magnafon
Magnavox
Magnum
Majestic
Mandor
0347
0161, 0320, 0342,
0343, 0349
0008, 0026, 0055,
0277
0179
0161, 0320, 0341,
0346
0008, 0026, 0050
0282
0277, 0342
0039
0057, 0058
0161, 0168, 0320
0320, 0350
0340
0320, 0349, 0350
0161, 0339
0320
0343
0007, 0050, 0058,
0179, 0183, 0282,
0342
0277, 0282
0161
0323, 0343
0323, 0342, 0343
0320, 0337, 0349,
0350
0031, 0053, 0066,
0116, 0117, 0140,
0161, 0164, 0175,
0195, 0269, 0277,
0282, 0300, 0309,
0317, 0320, 0323,
0328, 0342, 0343,
0346, 0349, 0350,
0366, 0368, 0377,
0466, 0471, 0478
0164
0349
0320
0337, 0343
0320, 0323, 0337,
0343
0323
0161, 0168, 0265,
0320, 0330, 0352
0339, 0349, 0350
0054
0320, 0323, 0346,
0349
0282, 0320, 0346,
0349, 0350
0350
0008, 0026
0282, 0342, 0346
0010, 0019, 0021,
0026, 0027, 0031,
0049, 0111
0342, 0343, 0345,
0347, 0349, 0350
0096
0339, 0341, 0349
0171, 0277, 0341,
0342
0008, 0009, 0010,
0013, 0026, 0032,
0033, 0048, 0050,
0128, 0211, 0212,
0224, 0226, 0239
0337, 0343
0054
0337
Manesth
0282, 0320, 0337,
0342, 0349, 0350
Marantz
0008, 0010, 0026,
0050, 0204, 0320,
0349, 0350
Marelli
0339
Mark
0277, 0282, 0320,
0323, 0349, 0350
Masuda
0282
Matsui
0282, 0320, 0323,
0342, 0343, 0344,
0346, 0349, 0350,
0455
Matsushita
0017
Maxent
0147, 0176
Mediator
0320, 0349, 0350
Medion
0320, 0337, 0343
Megapower
0140
Megatron
0026, 0031
MElectronic
0277, 0282, 0320,
0323
Melvox
0321
Memorex
0019, 0026, 0031,
0053, 0054, 0137,
0215, 0323, 0343
Memphis
0323, 0343
Mercury
0320, 0323
Metz
0339
MGA
0008, 0026, 0031,
0050, 0053
Micromaxx
0337, 0343
Microstar
0337, 0343
Midland
0007, 0021, 0023,
0027, 0030, 0056,
0062
Minerva
0171
Minoka
0320, 0350
Mintek
0153
Mitsubishi
0008, 0026, 0031,
0053, 0066, 0084,
0093, 0098, 0150,
0178, 0289, 0320,
0339, 0344, 0350,
0376
Mivar
0161, 0168, 0171,
0277, 0282, 0342
Monivision
0140
Montgomery Ward
0054
Motion
0171
Motorola
0052, 0178
MTC
0008, 0026, 0050,
0053, 0161, 0277
Multi System 0349
Multitech
0058, 0161, 0179,
0183, 0277, 0282,
0320, 0323, 0341,
0342, 0343, 0344,
0346, 0349
Murphy
0277, 0342
NAD
0026, 0031, 0111
Naonis
0346
NEC
0008, 0026, 0050,
0052, 0053, 0072,
0103, 0282, 0344
Neckermann
0161, 0282, 0320,
0339, 0342, 0346,
0349, 0350, 0351
NEI
0320, 0349, 0350
Net-TV
0176
Neufunk
0320, 0323
New Tech
0343, 0350
New World
0340
NewTech
0282, 0320, 0323
Nicamagic
0277, 0342
ii
Nikkai
Nikko
Nobliko
Nokia
Norcent
Nordic
Nordmende
Nordvision
Novatronic
Oceanic
Okano
Olevia
ONCEAS
Onwa
Opera
Oppo
Optimus
Optoma
Optonica
Orbit
Orion
Orline
Osaki
Oso
Otto Versand
Pael
Palladium
Palsonic
Panama
Panasonic
Panavision
Pathe Cinema
Pausa
Penney
Perdio
Perfekt
Philco
Philharmonic
iii
0277, 0282, 0320,
0323, 0337, 0340,
0342, 0349, 0350
0026, 0031, 0050
0171, 0277, 0341,
0342
0347
0201
0282
0339, 0345, 0347,
0350
0349
0320
0321, 0347
0161, 0320, 0351
0102, 0199, 0200,
0207, 0222
0342
0058, 0179
0320
0130
0017, 0019
0144
0178
0320, 0350
0043, 0146, 0283,
0320, 0323, 0328,
0343, 0349, 0350
0320
0282, 0320, 0337,
0340, 0342
0340
0282, 0320, 0336,
0342, 0344, 0348,
0349, 0350
0277, 0342
0161, 0282, 0320,
0342, 0351
0282
0277, 0282, 0320,
0323, 0337, 0342,
0343
0016, 0017, 0020,
0022, 0023, 0035,
0052, 0056, 0084,
0085, 0133, 0163,
0193, 0284, 0286,
0290, 0292, 0320,
0325, 0347, 0356
0320
0161, 0168, 0277,
0321, 0342
0323, 0343
0021, 0023, 0031,
0050, 0111
0277, 0320
0320
0008, 0009, 0010,
0012, 0026, 0050,
0052, 0053, 0161,
0171, 0320, 0339
0282, 0342
Philips
0008, 0009, 0010,
0011, 0012, 0032,
0048, 0049, 0052,
0122, 0128, 0134,
0186, 0187, 0213,
0221, 0224, 0226,
0239, 0256, 0257,
0259, 0261, 0263,
0267, 0280, 0281,
0287, 0296, 0299,
0301, 0303, 0305,
0313, 0319, 0320,
0324, 0333, 0339,
0342, 0349, 0350,
0353, 0357, 0360,
0380, 0383, 0452,
0459, 0460
Philips Magnavox 0011, 0032, 0033
Phoenix
0161, 0277, 0320,
0339, 0349, 0350
Phonola
0277, 0320, 0339,
0349, 0350
Pilot
0007, 0008, 0050
Pioneer
0008, 0026, 0094,
0095, 0161, 0320,
0345, 0347, 0349,
0350, 0458
Plantron
0320, 0323, 0337,
0350
Playsonic
0282
Polaroid
0039, 0142, 0202,
0234
Poppy
0323, 0343
Portland
0007, 0008, 0026,
0053
Prandoni-Prince 0171, 0346
Precision
0282, 0342
Prima
0157, 0243, 0323,
0343, 0347
Princeton
0140
Prism
0023, 0056
Profex
0323, 0343
Profi-Tronic
0320, 0350
Proline
0320, 0350
Proscan
0021, 0027, 0049
Prosonic
0161, 0277, 0282,
0320, 0342, 0349
Protech
0282, 0337, 0341,
0342, 0343, 0349,
0350
Proton
0008, 0012, 0026,
0031
Protron
0196
PROVIEW
0096, 0246
Provision
0320, 0349
Pulsar
0008, 0030, 0062
Pye
0256, 0320, 0349,
0350, 0378
Pymi
0323, 0343
Quandra Vision 0321
Quasar
0017, 0023, 0052,
0056
Quelle
0282, 0320, 0337,
0342, 0349, 0350
Questa
0344
Radialva
0320
RadioShack
0019, 0021, 0031,
0050, 0179, 0320
RadioShack/Realistic
0007, 0008, 0012,
0026, 0049, 0058
Radiola
0282, 0320, 0349,
0350
Radiomarelli
0320, 0339
Radiotone
0161, 0320, 0323,
0350
Rank
0344
RCA
0008, 0021, 0024,
0025, 0026, 0027,
0042, 0049, 0052,
0053, 0063, 0136,
0225
Realistic
0019, 0031, 0050,
0179
Recor
0320
Redstar
0320
Reflex
0320
Revox
0161, 0320, 0349,
0350
Rex
0337, 0346, 0347
RFT
0161, 0168, 0339
Rhapsody
0277
R-Line
0320, 0349, 0350
Roadstar
0323, 0337, 0340,
0343
Robotron
0339
Rowa
0277, 0282
Royal Lux
0161
RTF
0339
Runco
0030, 0050, 0062
Saba
0298, 0322, 0339,
0345, 0347
Saisho
0282, 0323, 0337,
0342, 0343
Salora
0346, 0347
Sambers
0171, 0341
Sampo
0007, 0008, 0026,
0050, 0176
Samsung
0004, 0005, 0006,
0007, 0008, 0012,
0026, 0031, 0036,
0050, 0053, 0076,
0077, 0079, 0114,
0124, 0125, 0126,
0127, 0139, 0161,
0183, 0185, 0190,
0191, 0258, 0264,
0277, 0282, 0320,
0323, 0334, 0337,
0342, 0343, 0349,
0350, 0351, 0373,
0453, 0468
Sandra
0277, 0282, 0342
Sansui
0043, 0109, 0320,
0350
Sanyo
0008, 0019, 0068,
0070, 0071, 0099,
0161, 0168, 0223,
0237, 0277, 0282,
0288, 0295, 0323,
0342, 0344, 0369,
0469
SBR
0320, 0349
Sceptre
0235, 0244
Schaub Lorenz 0347
Schneider
0282, 0316, 0318,
0320, 0333, 0340,
0342, 0349, 0350,
0382
Scotch
0026, 0031
Scott
0008, 0012, 0026,
0031, 0058, 0059,
0149, 0179
Sears
0008, 0010, 0019,
0021, 0026, 0027,
0031, 0049, 0051,
0059, 0111
SEG
0277, 0282, 0320,
0323, 0337, 0341,
0342, 0344, 0349,
0382
SEI
0320
SEI-Sinudyne 0339, 0341, 0347
Seleco
0344, 0346, 0347
Sencora
0323, 0343
Sentra
0323
Serino
0277
Sharp
0000, 0001, 0002,
0003, 0007, 0008,
0012, 0026, 0060,
0088, 0089, 0091,
0138, 0165, 0170,
0178, 0198, 0229,
0262, 0278, 0279,
0291, 0308, 0312,
0336, 0344, 0354,
0370, 0449, 0450,
0451, 0464, 0474,
0476
Sheng Chia
0178
Shogun
0008
Siarem
0320, 0339, 0341
Sierra
0320, 0350
Siesta
0161
Signature
0054
Silva
0277
Silver
0344
Singer
0321, 0339, 0341
Sinudyne
0320, 0339, 0341,
0349
Skantic
0347
Solavox
0347
Sonitron
0161, 0282
Sonoko
0282, 0320, 0323,
0337, 0342, 0343,
0349, 0350
Sonolor
0321, 0347
Sontec
0161, 0320, 0349,
0350
Sony
0038, 0044, 0045,
0047, 0055, 0104,
0105, 0107, 0110,
0123, 0184, 0220,
0248, 0249, 0251,
0252, 0254, 0326,
0343, 0344, 0371,
0374, 0457, 0475
Sound & Vision 0340, 0341
Soundesign
0008, 0026, 0031,
0058, 0059, 0179
Soundwave
0320, 0349, 0350
Squareview
0051
SSS
0008, 0058, 0179
Standard
0282, 0320, 0323,
0340, 0342, 0343,
0350
Starlite
0058, 0179, 0320,
0323, 0349
Stenway
0348
Stern
0346, 0347
Strato
0320, 0323
Stylandia
0282
Sunkai
0343
Sunstar
0320, 0323
Sunwood
0320, 0323, 0343,
0350
Superla
0277, 0282, 0342
Superscan
0013, 0178
SuperTech
0277, 0320, 0323
Supra
0323, 0343
Supre-Macy
0057
Supreme
0055, 0107
Susumu
Sutron
SVA
Sydney
Sylvania
0340
0323, 0343
0151
0277, 0282, 0342
0008, 0009, 0010,
0011, 0013, 0026,
0048, 0050, 0051,
0128, 0227, 0253
Symphonic
0051, 0058, 0062,
0128, 0179, 0215
Syntax
0199
Syntax-Brillian 0199
Sysline
0349
Sytong
0277
Tandy
0178, 0282, 0336,
0340, 0342, 0347
Tashiko
0277, 0282, 0342,
0344, 0346
Tatung
0052, 0177, 0282,
0320, 0342, 0349,
0350
TCM
0337, 0343
Teac
0282, 0320
Tec
0282, 0323, 0342,
0343
Technics
0017, 0023, 0056
TechniSat
0274, 0496, 0497,
0499
Techwood
0008, 0023, 0026,
0056
TEDELEX
0282
Teknika
0007, 0008, 0010,
0012, 0026, 0053,
0054, 0058, 0059,
0179
Teleavia
0345
Telecor
0282, 0320
Telefunken
0320, 0322, 0345,
0350
Telegazi
0320
Telemeister
0320
Telesonic
0320
Telestar
0320
Teletech
0320, 0323, 0343,
0349
Teleton
0282, 0342
Televideon
0277
Televiso
0321
Tensai
0282, 0320, 0323,
0340, 0343, 0350
Tesmet
0350
Tevion
0337, 0343
Texet
0277, 0282, 0323,
0342
Thomson
0162, 0188, 0189,
0285, 0320, 0322,
0342, 0345, 0350
Thorn
0320, 0349
TMK
0008, 0026, 0031
TNCi
0030
Tokai
0282, 0320, 0350
Tokyo
0277, 0342
Tomashi
0348
Toshiba
0018, 0019, 0040,
0041, 0046, 0073,
0100, 0103, 0108,
0109, 0111, 0121,
0132, 0166, 0208,
0210, 0214, 0217,
0260, 0268, 0282,
0283, 0293, 0304,
0306, 0307, 0329,
0344, 0355, 0454
Totevision
0007
Towada
0282, 0347
Trakton
0282
Trans Continens 0282, 0320
Transtec
0277
Trident
0282
Triumph
0320
Uher
0161, 0171, 0320,
0347, 0350
Ultravox
0277, 0320, 0339,
0341, 0342
Unic Line
0320
United
0349
Universum
0161, 0171, 0282,
0320, 0337, 0349,
0350, 0351
Univox
0320
Vector Research 0050
Vestel
0282, 0320, 0346,
0347, 0349, 0350,
0351
Vexa
0320, 0323, 0343,
0349
Victor
0015, 0344, 0350
VIDEOLOGIC 0277
Videologique 0277, 0282, 0340,
0342
VideoSystem 0320, 0350
Videotechnic 0277, 0282
Vidikron
0010
Vidtech
0008, 0026, 0031,
0053
Viewsonic
0176, 0203, 0232,
0364
Viking
0057
Viore
0148
Visiola
0277, 0342
Vision
0282, 0320, 0350
Vizio
0008, 0177, 0218,
0242, 0500, 0501,
0502, 0503, 0506
Vortec
0320, 0349, 0350
Voxson
0171, 0320, 0339,
0346, 0347, 0350
Waltham
0282, 0320, 0342
Wards
0008, 0009, 0010,
0026, 0031, 0048,
0049, 0050, 0053,
0054, 0059
Watson
0320, 0349, 0350
Watt Radio
0277, 0341, 0342
Waycon
0111
Wega
0320, 0339, 0344
Wegavox
0323
Weltblick
0282, 0320, 0349,
0350
Westinghouse 0107, 0216, 0220
White Westinghouse
0037, 0090, 0277,
0320, 0341, 0342,
0349
Wincom
0101, 0106
Xrypton
0320
Yamaha
0008, 0026, 0050,
0053, 0080, 0081,
0082, 0083, 0086,
0087
Yamishi
0282, 0320
Yokan
0320
Yoko
0161, 0277, 0282,
0320, 0323, 0337,
0340, 0342, 0343,
0349, 0350
Yorx
0340
Zanussi
0282, 0346
Zenith
0008, 0028, 0029,
0030, 0031, 0054,
0061, 0062
VCR
ABS
Adventura
Adyson
Aiwa
1016
1069
1008
1024, 1026, 1027,
1069
Akai
1021, 1027
Akiba
1008, 1029
Akura
1008, 1027, 1029
Alba
1008, 1009, 1024,
1025, 1029, 1030
Alienware
1016
Ambassador
1030
American High 1068
Amstrad
1008, 1009, 1026
Anitech
1008, 1029
Apex
1088
ASA
1028, 1031
Asha
1070
Asuka
1008, 1026, 1028,
1029, 1031
Audio Dynamics 1064
Audiosonic
1009
Audiovox
1071
Baird
1009, 1025, 1026,
1027
Bang & Olufsen 1017
Basic Line
1008, 1009, 1024,
1025, 1029, 1030
Baur
1028
Beaumark
1070
Bell & Howell 1065
Bestar
1009, 1025, 1030
Black Panther Line
1009, 1025
Blaupunkt
1028
Bondstec
1008, 1030
Broksonic
1100
Bush
1008, 1009, 1024,
1025, 1029, 1049,
1051, 1063, 1217
Calix
1071
Candle
1070, 1071
Canon
1068
Cathay
1009
Catron
1030
CGE
1026, 1027
Cimline
1008, 1024, 1029
CineVision
1104
Citizen
1070, 1071
Clatronic
1008, 1030
Colortyme
1064
Condor
1009, 1025, 1030
Craig
1070, 1071
Crown
1008, 1009, 1025,
1029, 1030
Curtis Mathes 1064, 1068, 1070
Cybernex
1070
CyberPower
1016
Daewoo
1009, 1025, 1030,
1038, 1069, 1223
Dansai
1008, 1009, 1029
Dantax
1024
Daytron
1009, 1025
DBX
1064
De Graaf
1028
Decca
1026, 1027, 1028
Dell
1016
Denko
1008
DiamondVision 1096
DigiFusion
DIRECTV
1014
1019, 1105, 1110,
1111, 1113, 1116,
1122
Dish Network 1018
Dishpro
1018
Dual
1009, 1027, 1028
Dumont
1026, 1028
Durabrand
1114
Dynatech
1069
Echostar
1018
Elbe
1009
Elcatech
1008
Electrohome
1071
Electrophonic 1071
Elsay
1008
Elta
1008, 1009, 1029
Emerson
1008, 1020, 1068,
1069, 1071
ESC
1009, 1025
Etzuko
1008, 1029
Expressvu
1018
Ferguson
1027
Fidelity
1008, 1026
Finlandia
1028
Finlux
1026, 1027, 1028
Firstline
1008, 1024, 1029,
1031
Fisher
1065
Flint
1024
Formenti/Phoenix 1028
Frontech
1030
Fuji
1068
Fujitsu
1026
Funai
1026, 1069
Galaxy
1026
Garrard
1069
Gateway
1016
GBC
1029, 1030
GE
1068, 1070
GEC
1028
Geloso
1029
General
1030
General Technic 1024
GOI
1018
GoldHand
1008, 1029
Goldstar
1026, 1031, 1064,
1071
Goodmans
1008, 1009, 1025,
1026, 1029, 1030,
1031
Gradiente
1069
Graetz
1027
Granada
1028
Grandin
1008, 1009, 1025,
1026, 1029, 1030,
1031
Grundig
1028, 1029
Hanseatic
1009, 1028, 1031
Harley Davidson 1069
Harman/Kardon 1064
Harwood
1008
HCM
1008, 1029
Headquarter
1065
Hewlett Packard 1016
Hinari
1008, 1009, 1024,
1029
Hisawa
1024
Hitachi
1011, 1026, 1027,
1028, 1046, 1062
HNS
1110
Howard Computers
1016
HP
1016
HTS
1018
iv
Hughes
1111, 1113, 1122
Hughes Network Systems
1110, 1116
Humax
1012, 1110, 1113
Hush
1016
Hypson
1008, 1009, 1024,
1029
iBUYPOWER 1016
Impego
1030
Imperial
1026
Inno Hit
1008, 1009, 1025,
1028, 1029, 1030
Innovation
1024
Instant Replay 1068
Interbuy
1008, 1031
Interfunk
1028
Intervision
1009, 1026
Irradio
1008, 1029, 1031
ITT
1027
ITV
1009, 1025, 1031
JC Penney
1064, 1065, 1068,
1070, 1071
JCL
1068
JVC
1007, 1018, 1027,
1039, 1064, 1065,
1066, 1067, 1078,
1089, 1092, 1093,
1094, 1095, 1113,
1208, 1209, 1212,
1213, 1215, 1218
Kaisui
1008, 1029
Karcher
1028
Kendo
1008, 1024, 1025,
1030
Kenwood
1027, 1064, 1065
Kodak
1068, 1071
Korpel
1008, 1029
Kyoto
1008
Lenco
1025
Leyco
1008, 1029
LG
1010, 1026, 1031,
1047, 1054, 1056,
1071, 1103, 1221
Lifetec
1024
Linksys
1016
Lloyd’s
1069
Loewe Opta
1028, 1031
Logik
1008, 1029
Lumatron
1009, 1025
Luxor
1008
LXI
1071
M Electronic 1026
Magnavox
1020, 1068, 1114,
1126
Magnin
1071
Manesth
1008, 1029
Marantz
1028, 1064, 1065,
1068
Mark
1009
Marta
1071
Matsui
1024, 1031
Matsushita
1068
Media Center PC 1016
Mediator
1028
Medion
1024
MEI
1068
Memorex
1023, 1026, 1031,
1065, 1068, 1069,
1070, 1071, 1098,
1114
Memphis
1008, 1029
MGN Technology 1070
Micromaxx
1024
Microsoft
1016
Microstar
1024
v
Migros
Mind
Mitsubishi
Motorola
MTC
Multitech
1026
1016
1026, 1028, 1079
1068
1070
1008, 1026, 1028,
1029, 1030, 1069,
1070
Murphy
1026
NEC
1027, 1064, 1065
Neckermann
1027, 1028
NEI
1028
Nesco
1008, 1029
Nikkai
1008, 1009, 1030
Nikko
1071
Niveus Media 1016
Noblex
1070
Nokia
1009, 1027
Nordmende
1027
Northgate
1016
Oceanic
1026, 1027
Okano
1008, 1009, 1024
Olympus
1068
Optimus
1071
Orion
1023, 1024, 1051,
1115, 1217
Orson
1026
Osaki
1008, 1026, 1029,
1031
Otto Versand 1028
Palladium
1008, 1027, 1029,
1031
Panasonic
1000, 1022, 1044,
1055, 1068, 1072,
1085, 1090, 1091,
1120, 1121, 1214
Pathe Marconi 1027
Perdio
1026
Philco
1008, 1068
Philips
1006, 1013, 1028,
1035, 1040, 1045,
1046, 1050, 1058,
1059, 1061, 1068,
1076, 1101, 1110,
1113, 1116, 1117,
1122, 1126, 1210,
1211
Philips Magnavox 1076
Phonola
1028
Pilot
1071
Pioneer
1028, 1036
Polaroid
1088, 1099
Portland
1009, 1025, 1030
Prinz
1026
Profex
1029
Proline
1026
Proscan
1019
Prosonic
1009, 1024
Pulsar
1114
Pye
1028, 1102
Quarter
1065
Quartz
1065
Quasar
1068
Quelle
1026, 1028
Radialva
1008
RadioShack
1071
RadioShack/Realistic
1065, 1068, 1069,
1070, 1071
Radiola
1028
Radix
1071
Randex
1071
RCA
1019, 1068, 1070,
1075, 1110, 1113,
1122, 1125
Realistic
1065, 1068, 1069,
1070, 1071
ReplayTV
1022, 1123
Rex
1027
RFT
1008, 1028, 1030
Ricavision
1016
Roadstar
1008, 1009, 1025,
1029, 1031
Royal
1008
Runco
1114
Saba
1027
Saisho
1024, 1029
Samsung
1002, 1034, 1041,
1043, 1057, 1060,
1070, 1084, 1110,
1116, 1122, 1124,
1220, 1222
Samurai
1008, 1030
Sanky
1114
Sansui
1023, 1027, 1106,
1115
Sanyo
1032, 1065, 1070
Saville
1009
SBR
1028
Schaub Lorenz 1026, 1027
Schneider
1008, 1009, 1024,
1025, 1026, 1028,
1029, 1030, 1031
Sears
1065, 1068, 1071
SEG
1008, 1009, 1029
SEI-Sinudyne 1028
Seleco
1027
Sentra
1008, 1030
Sentron
1008, 1029
Sharp
1003, 1033, 1077,
1107, 1127, 1219
Shintom
1008, 1029
Shivaki
1031
Shogun
1070
Siemens
1031
Silva
1031
Silver
1009
Singer
1068
Sinudyne
1028
Solavox
1030
Sonic Blue
1022, 1123
Sonneclair
1008
Sonoko
1009, 1025
Sontec
1031
Sony
1001, 1016, 1048,
1053, 1073, 1074,
1080, 1081, 1082,
1083, 1108, 1118,
1216
Stack
1016
Stack 9
1016
Standard
1009, 1025
Stern
1009
STS
1068
Sunkai
1024
Sunstar
1026
Suntronic
1026
Sunwood
1008, 1029
Superscan
1020
Sylvania
1020, 1068, 1069,
1102, 1126
Symphonic
1008, 1069, 1126
Systemax
1016
Tagar Systems 1016
Taisho
1024
Tandberg
1009
Tandy
1065
Tashiko
1026, 1071
Tatung
1026, 1027, 1028
TCM
1015, 1024, 1042
Teac
Tec
Technics
Teknika
Teleavia
Telefunken
Teletech
Tenosal
Tensai
1009, 1069
1008, 1009, 1030
1068
1068, 1069, 1071
1027
1027
1008, 1009
1008, 1029
1008, 1026, 1029,
1031
Tevion
1024
Thomson
1005, 1027
Thorn
1027
Tivo
1108, 1110, 1111,
1113, 1117, 1118,
1119, 1122
TMK
1070
Tokai
1008, 1029, 1031
Tonsai
1029
Toshiba
1004, 1016, 1027,
1028, 1037, 1049,
1052, 1086, 1087,
1097, 1109, 1112,
1194
Totevision
1070, 1071
Touch
1016
Towada
1008, 1029
Towika
1008, 1029
TVA
1030
Uher
1031
UltimateTV
1019
Ultravox
1009
Unitech
1070
United Quick Star 1009, 1025
Universum
1026, 1028, 1031
Vector Research 1064
Video Concepts 1064
Videon
1024
Videosonic
1070
Viewsonic
1016
Voodoo
1016
Wards
1068, 1069, 1070,
1071
Weltblick
1031
XR-1000
1068, 1069
Yamaha
1064, 1065
Yamishi
1008, 1029
Yokan
1008, 1029
Yoko
1008, 1029, 1030,
1031
Zenith
1114
ZT Group
1016
DVD player
4Kus 2051
Accurian
Advent
AEG
Airis
Aiwa
Akai
2142
2155, 2251
2362
2364
2322
2145, 2177, 2179,
2248
Akura
2356
Alba
2064, 2165, 2186,
2337, 2346
Alco
2149
Alize
2361
Allegro
2133
Amitech
2362
Amphion MediaWorks
2195
AMW
2195, 2363
Apex
2030, 2124, 2125,
2126, 2127, 2130,
2131
Apple
2241
Arrgo
2138
Asono
2364
Aspire
2152, 2222
Astar
2240
ATACOM
2364
Audiovox
2061, 2149
Avious
2367
Awa
2363
Axion
2249
Bang & Olufsen 2128
Baze
2367
BBK
2364
Bellagio
2363
Best Buy
2359
Blaupunkt
2131
Blue Parade
2157
Boghe
2382
Brainwave
2362
Brandt
2148, 2188
Broksonic
2145, 2146
Bush
2064, 2110, 2170,
2268, 2290, 2346,
2358, 2367, 2383
California Audio Labs
2151
Cambridge Audio 2354
CAT
2352, 2353
CAVS
2192
Centrum
2353
CGV
2354, 2362
Changhong
2140
Cinetec
2363
CineVision
2133, 2237
Clatronic
2358, 2367
Coby
2031, 2046, 2360
Conia
2383
Continental Edison
2363
Crown
2362
C-Tech
2355
Curtis Mathes 2139
CVG
2377
CyberHome
2022, 2098, 2138,
2187, 2336
Cytron
2244
Daenyx
2363
Daewoo
2001, 2133, 2276,
2298, 2330, 2362,
2363, 2377
Daewoo International
2363
Dalton
2357
Dansai
2362, 2381
Daytek
2184, 2195, 2363
Dayton
2363
DEC
2358
Decca
2362
Denon
2059, 2151, 2193,
2332
Denver
2356, 2358, 2360,
2370
Denzel
2380
Desay
2205
Diamond
2354, 2355
DiamondVision 2225, 2232
Disney
2010, 2028
DK Digital
2339
Dmtech
2176
Dual
2380
Durabrand
2136
DVX
2355
Easy Home
2359
Eclipse
2354
E-Dem
2364
Electrohome
2362
Elin
2362
Elta
2341, 2361, 2362
Emerson
2129, 2137, 2150
Enterprise
2129
Enzer
2380
Epson
2247
ESA
2137
Finlux
2354, 2362, 2367
Fintec
2377
Fisher
2134
Funai
2137
Gateway
2051
GE
2029, 2131, 2156
Gericom
2351
GFM
2226
Giec
2382
Global Solutions2355
Global Sphere 2355
Go Video
2133, 2213
Goodmans
2165, 2280, 2291,
2358, 2371, 2376,
2382
GPX
2227
Gradiente
2151
Graetz
2380
Greenhill
2131
Grundig
2349
Grunkel
2362, 2366
GVG
2377
H&B
2358
H_her
2364
Haaz
2354, 2355
Haier
2254
Harman/Kardon 2047, 2135
HiMAX
2359
Hitachi
2062, 2090, 2115,
2274, 2282, 2316,
2359, 2380
Hiteker
2130
Home Tech Industries
2364
Hyundai
2366
Ilo
2245
Initial
2131, 2245
Innovation
2182
Insignia
2002, 2137, 2253
Integra
2157
Irradio
2053
iSymphony
2246
JBL
2135
JVC
2020, 2096, 2097,
2099, 2100, 2101,
2102, 2103, 2106,
2107, 2160, 2257,
2260, 2262, 2263,
2321, 2324, 2326,
2327, 2343, 2464,
2465, 2468, 2469,
2471
Jwin
2198
Kansai
2360
Kawasaki
2149
Kennex
2362
Kenwood
2041, 2151, 2348
KeyPlug
2362
Kiiro
2362
Kingavon
2358
Kiss
2380
KLH
2131, 2149
Koda
2358
Koss
2013, 2148, 2158
KXD
Landel
Lasonic
Lawson
Lecson
Lenco
Lenoxx
LG
Life
Lifetec
Limit
Liquid Video
Liteon
Loewe
LogicLab
Magnavox
Magnex
Majestic
Marantz
Marquant
Matsui
McIntosh
Mecotek
Medion
Memorex
MiCO
Micromaxx
Microsoft
Microstar
Minoka
Minowa
Mintek
Mitsubishi
Mizuda
Monyka
Mustek
Mx Onda
Mystral
Naiko
Nesa
Neufunk
Nevir
Next Base
Nexxtech
NU-TEC
Onkyo
Oopla
Oppo
Optim
Optimus
Orava
Orbit
Orion
Oritron
P&B
Pacific
Panasonic
Parasound
2359
2143
2132
2355
2381
2358, 2362, 2367
2136, 2153
2002, 2033, 2038,
2057, 2129, 2133,
2189, 2191, 2223,
2238, 2270, 2288,
2335, 2373, 2375
2182
2182
2355
2158
2043, 2051, 2142
2320
2355
2025, 2050, 2137,
2150, 2159, 2224,
2230, 2358
2367
2360
2328
2362
2148, 2378
2199
2362
2182
2028, 2145, 2234
2354, 2382
2182
2156
2182
2362
2367
2131, 2245
2003
2358, 2359
2380
2186
2354
2366
2362
2131
2380
2362
2143
2243
2383
2159, 2368
2051
2196, 2255
2381
2180
2358
2363
2073, 2110
2148, 2158
2358
2355
2011, 2024, 2034,
2042, 2058, 2062,
2066, 2067, 2093,
2116, 2117, 2118,
2119, 2120, 2121,
2122, 2123, 2151,
2159, 2164, 2166,
2167, 2172, 2173,
2175, 2209, 2214,
2275, 2277, 2278,
2281, 2282, 2283,
2301, 2374, 2470
2197
peeKTON
Philips
2364
2008, 2012, 2025,
2044, 2050, 2051,
2053, 2060, 2072,
2108, 2111, 2147,
2159, 2163, 2169,
2174, 2181, 2185,
2230, 2261, 2266,
2267, 2286, 2287,
2289, 2295, 2300,
2302, 2317, 2328,
2338, 2342, 2350,
2467
Phonotrend
2367
Pioneer
2016, 2017, 2018,
2019, 2035, 2092,
2094, 2095, 2109,
2157, 2180, 2190,
2212, 2269, 2272,
2299, 2304, 2305,
2306, 2307, 2308,
2309, 2310, 2311,
2344, 2345, 2347,
2379
Pointer
2362
Polaroid
2125, 2215, 2235
Portland
2362
Powerpoint
2363
Prima
2252
Proceed
2130
Proscan
2156
Prosonic
2360, 2377
Protron
2202
Provision
2358
Pye
2144
Qwestar
2148
Raite
2380
RCA
2021, 2029, 2104,
2105, 2131, 2149,
2156, 2157, 2229
RedStar
2356, 2360, 2362
Regent
2153
Reoc
2355
Rimax
2361
Rio
2133
Roadstar
2331, 2358
Ronin
2363
Rotel
2203
Rowa
2154, 2383
Rownsonic
2353
Saba
2148, 2188
Sabaki
2355
Saivod
2362
Sampo
2141
Samsung
2000, 2045, 2077,
2112, 2113, 2114,
2115, 2151, 2200,
2216, 2219, 2228,
2264, 2265, 2271,
2279, 2294, 2303,
2329, 2365
Sansui
2073, 2145, 2354,
2355, 2362
Sanyo
2134, 2145, 2217,
2292
ScanMagic
2186
Schaub Lorenz 2362
Schneider
2176
Scientific Labs 2355
Scott
2161, 2357
Seeltech
2364
SEG
2162, 2355, 2363,
2380
vi
Sharp
2006, 2040, 2088,
2091, 2182, 2194,
2220, 2221, 2231,
2236, 2293, 2340
Shinsonic
2245
Sigmatek
2359, 2364
Silva
2356
Singer
2354, 2355
Skymaster
2325, 2355
Skyworth
2356
Slim Art
2362
SM Electronic 2355
Sonic Blue
2133
Sontech
2366
Sony
2004, 2005, 2007,
2009, 2014, 2015,
2023, 2026, 2027,
2052, 2068, 2069,
2070, 2071, 2074,
2075, 2084, 2085,
2087, 2168, 2171,
2208, 2210, 2211,
2258, 2273, 2284,
2285, 2312, 2313,
2314, 2315, 2318,
2319, 2466
Soundmaster
2355
Soundmax
2355
Spectra
2363
Spectroniq
2201
Standard
2355
Star Cluster
2355
Starmedia
2358, 2364
Sungale
2204
Sunkai
2362
Superscan
2150
Supervision
2355
Sylvania
2012, 2137, 2150,
2178, 2230, 2239
Symphonic
2108, 2230
Synn
2355
T.D.E. Systems 2366
Tatung
2001, 2362
TCM
2182, 2297
Teac
2149, 2333, 2355,
2383
Tec
2356
Technics
2151
Technika
2362, 2367
Telefunken
2353
Tensai
2362
Tevion
2182, 2355, 2357
Theta Digital 2157
Thomson
2183, 2188, 2334,
2372
Tokai
2356, 2380
Top Suxess
2364
Toshiba
2032, 2036, 2037,
2039, 2048, 2049,
2054, 2055, 2072,
2073, 2076, 2078,
2079, 2086, 2145,
2159, 2218, 2233,
2256, 2259, 2296,
2369
TRANScontinents 2363, 2367
Transonic
2367
Trio
2362
Trutech
2242
TruVision
2359
TSM
2364
Umax
2361
United
2367
Urban Concepts 2159
US Logic
2245
vii
Venturer
Viewmaster
Vocopro
VocoStar
Waitec
Welltech
Westinghouse
Wharfedale
Woxter
Xbox
Xlogic
XMS
Xoro
Yamada
Yamaha
Yamakawa
Yukai
Zenith
2149
2364
2206
2207
2364
2382
2063, 2250
2354, 2355
2361, 2364
2156, 2183
2355, 2362
2362
2382
2051, 2361, 2363
2056, 2064, 2065,
2080, 2081, 2082,
2083, 2089, 2118,
2151, 2323
2363, 2380
2186
2002, 2129, 2133,
2159, 2223
Blu-ray disc player
LG
Panasonic
Pioneer
Samsung
Sharp
Sony
Yamaha
2033
2011, 2209, 2214
2212
2045, 2113
2194, 2220, 2221
2075
2064, 2474
DVR
Bush
Hitachi
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
2110
2090
2066, 2067, 2093,
2116, 2117, 2119,
2120, 2122, 2123
2108, 2111
2016, 2017, 2018,
2019, 2092, 2094,
2095, 2109
2105
2113, 2219
2088, 2091
2084, 2085, 2087
2086
2089, 2118
DVD recorder
Aspire
Astar
Broksonic
Go Video
Hitachi
Insignia
Irradio
JVC
LG
Liteon
Panasonic
Philips
Pioneer
Pye
Samsung
Sansui
2222
2240
2146
2213
2062
2002
2053
2100, 2101, 2106,
2107
2033, 2057, 2223,
2238
2043
2011, 2034, 2058,
2062, 2116, 2117,
2119, 2120, 2121,
2123
2008, 2044, 2050,
2051, 2147
2017, 2035
2144
2000, 2112, 2216
2073
Sanyo
Sony
Sylvania
Toshiba
Yamaha
2217
2004, 2005, 2007,
2052, 2068, 2069,
2074, 2208, 2210,
2211
2239
2032, 2036, 2037,
2039, 2049, 2054,
2055, 2076
2056
Cable TV
ABC
3002, 3003, 3017,
3066, 3067, 3086,
3093, 3119, 3122
ADB
3020
Adelphia
3081
Alcatel
3016
Americast
3124
Amstrad
3022, 3098
Antronix
3065, 3070
Archer
3070
Arcon
3098
AT&T
3095
Axis
3098
Bell South
3124
Cable Vision
3092
Cabletenna
3065
Cabletime
3104
Cableview
3087
Clearmaster
3127
ClearMax
3127
Clyde Cablevision 3105
Colour Voice 3068
Comcast
3084, 3088, 3117
Comcrypt
3107
Comtronics
3069
Contec
3074
Coolmax
3127
COX
3084
Cryptovision
3110
Director
3084
Eastern
3075
Everquest
3123
Fidelity
3098
Filmnet
3107
Filmnet Cablecrypt
3111
Filmnet Comcrypt
3111
Finlux
3097
Focus
3126
Foxtel
3022
France Telecom 3100, 3101
Freebox
3023
GC Electronics 3070
GE
3066, 3093
GEC
3105
Gemini
3072, 3123
General Instrument
3017, 3025, 3066,
3084, 3090, 3096,
3117
Goldstar
3120
Gooding
3099
Grundig
3098, 3099
Hamlin
3073, 3078
Hirschmann
3097
Hitachi
3066
HomeChoice 3106
Humax
3021, 3080, 3083
ITT Nokia
3097
Jasco
3123
Jerrold
3017, 3018, 3025,
3066, 3072, 3084,
3090, 3096, 3119,
3123
JVC
3099
Kabel Deutschland
3024, 3027, 3121
Macab
3101
Magnavox
3079
Maspro
3099
Matsui
3099
MegaCable
3117
Memorex
3076, 3122
Minerva
3099
Mnet
3107
Motorola
3025, 3026, 3084,
3088, 3090, 3095,
3117
Movie Time
3077, 3109
Mr Zapp
3101
Multichoice
3107
Multitech
3127
NEC
3064
NET Brazil
3085
Nokia
3097
Noos
3101
NSC
3077
Oak
3074
Pace
3006, 3089, 3121
Palladium
3099
Panasonic
3112, 3118, 3122
Paragon
3122
Philips
3068, 3071, 3079,
3099, 3100, 3101,
3103
Pioneer
3001, 3006, 3094,
3098, 3114, 3116,
3120
Popular Mechanics
3126
Proscan
3066, 3093
Pulsar
3122
PVP Stereo Visual Matrix
3018
Quasar
3122
RadioShack
3123, 3127
RCA
3030, 3031, 3087,
3118
Realistic
3070
Recoton
3126
Regal
3078
Regency
3075
Rembrandt
3066
Runco
3122
Sagem
3101
Samsung
3069, 3089, 3114,
3120
SAT
3098
Scientific Atlanta 3000, 3001, 3002,
3003, 3006, 3028,
3029, 3081, 3086,
3089, 3094, 3095,
3108
Signal
3072, 3123
Signature
3066
Sony
3092, 3125
Sprucer
3118
Standard Component
3115
Starcom
3017, 3072, 3119,
3123
Stargate
3072, 3123
Starquest
3072, 3123
Supercable
3090
Supermax
3127
Tele+1
Telepiu
Thomson
TIME WARNER
Tocom
Torx
Toshiba
Tristar
Tudi
Tusa
TV86
Unika
United Cable
Universal
Universum
V2
Videoway
View Star
Viewmaster
Vision
Visiopass
Vortex View
Wittenberg
Zenith
Zentek
3107, 3111
3107
3082, 3091
3084
3067
3017
3122
3127
3102
3072, 3123
3077
3065, 3070
3018, 3119
3065, 3070
3097, 3099
3127
3019
3074, 3077, 3079
3127
3127
3097, 3100, 3101
3127
3098
3113, 3122, 3124
3126
Satellite TV
AB Sat
AccessHD
ADB
AGS
Akai
Alba
Aldes
Allsat
Allsonic
Alltech
Alpha
Alpha Digital
Alphastar
Amitronica
Amstrad
Anglo
Ankaro
Anttron
Apollo
Armstrong
Artec
Asat
ASLF
Astacom
Astra
Astro
AudioTon
Aurora
Austar
Axiel
Axis
Best
Blaupunkt
Blue Sky
Boca
Boston
Brain Wave
Broadcast
Broco
4216, 4217
4104
4220
4216
4053, 4055
4001, 4004, 4006,
4007, 4062, 4217
4005, 4007, 4010
4048, 4053, 4055
4005, 4008, 4024
4217
4053
4104
4077
4217
4011, 4035, 4217,
4218
4217
4005, 4008, 4024,
4217
4001, 4004
4001
4011, 4053
4100
4053, 4055
4217
4216
4009, 4011, 4054,
4217, 4219
4004, 4008, 4010,
4015, 4024, 4213,
4218, 4219
4004, 4048
4222
4222
4216
4008, 4009, 4024,
4050
4008, 4024
4015
4217
4011, 4054, 4059,
4217
4216
4013
4012
4217
BSkyB
BT
Bubu Sat
Bush
Cambridge
Canal Satellite
Canal+
CaptiveWorks
Channel Master
Chaparral
CHEROKEE
Chess
CityCom
Clatronic
CNT
Comag
4035, 4041
4216
4217
4006, 4045
4218
4213
4213
4099
4007, 4110
4075
4216
4212, 4217
4006, 4215, 4219
4013
4010
4080, 4081, 4082,
4083, 4086
Commlink
4005
Comtech
4050
Condor
4008, 4024, 4219
Connexions
4014, 4024
Conrad
4024, 4215, 4218,
4219
Conrad Electronic 4217, 4219
Contec
4050
Coolsat
4096
Cosat
4048
Coship
4109
Crown
4011
Daeryung
4014
Daewoo
4057, 4217
DDC
4007
Delega
4007
Dew
4050
Diamond
4051
Digiality
4219
Digital Stream 4105
DIRECTV
4056, 4064, 4067,
4068, 4070, 4071,
4074, 4107, 4116,
4119, 4121, 4122,
4123, 4127, 4192,
4193, 4194, 4195,
4196, 4197, 4198,
4199, 4200, 4201,
4202, 4203, 4206,
4207, 4221
Discoverer
4212
Discovery
4216
Diseqc
4216
Dish Network 4018, 4065, 4089,
4092, 4094, 4095,
4117
Dishpro
4018, 4117
Distrisat
4053
Ditristrad
4048
DNT
4014, 4053, 4055
Drake
4072
DStv
4222
Dune
4024
Echostar
4014, 4018, 4065,
4089, 4117, 4217
Einhell
4001, 4005, 4011,
4217, 4218
Elap
4216, 4217
Elekta
4010
Elsat
4217
Elta
4001, 4008, 4024,
4048, 4053, 4055
Emanon
4001
Emme Esse
4008, 4024
Engel
4217
Ep Sat
4006
EURIEULT
4031
Eurodec
4052
Europa
Europhon
Eurosat
Eurosky
4053, 4218, 4219
4219
4011
4024, 4011, 4008,
4215, 4218, 4219
Eurostar
4011, 4215, 4219
Eutelsat
4217
Exator
4001, 4004
Expressvu
4117
Fenner
4024, 4212, 4217
Ferguson
4006, 4052, 4214
Fidelity
4218
Finlandia
4006
Finlux
4006
FinnSat
4050, 4052
Flair Mate
4217
Foxtel
4222
Freecom
4001, 4049, 4218
FTEmaximal 4024, 4217
Fuba
4024, 4001, 4008,
4014, 4015, 4055,
4215
Galaxis
4024, 4005, 4008,
4009, 4050, 4048,
4215, 4222
GE
4093, 4066, 4111,
4197
General Instrument
4073, 4019
GMI
4011
GOI
4117
Goldbox
4213
GoldStar
4049
Goodmans
4029, 4002, 4006
Goodmind
4111
Grandin
4031
Grothusen
4001, 4049
Grundig
4006, 4004, 4015,
4035, 4211, 4218,
4222
Hänsel & Gretel 4219
Hantor
4001, 4013
Hanuri
4010
Hauppauge
4044
Heliocom
4219
Helium
4219
Hinari
4007
Hirschmann
4024, 4015, 4210,
4218, 4219, 4216
Hisawa
4013
Hisense
4016
Hitachi
4114, 4006, 4199,
4203
Homecast
4087, 4084, 4085
Houston
4048
HTS
4117
Hughes
4064, 4068, 4194,
4192, 4196, 4202
Hughes Network Systems
4071
Humax
4097, 4025, 4030,
4060
Huth
4005, 4011, 4012,
4013, 4050, 4048,
4219, 4223
Hypson
4031
Ilo
4016
Imex
4031
Innovation
4008
Insignia
4107
Intertronic
4011
Intervision
4048, 4219
ITT Nokia
4006
Jerrold
4019
Johansson
4013
JOK
JSR
JVC
4216
4048
4089, 4065, 4117,
4029
Kamm
4217
Kathrein
4015, 4055, 4053,
4063, 4034, 4042,
4215, 4216, 4217
Kathrein Eurostar 4215
Klap
4216
Konig
4219
Kosmos
4049
KR
4004
Kreiselmeyer 4015
K-SAT
4217
Kyostar
4001
L&S Electronic 4024
Lasat
4024, 4010, 4008,
4054, 4215, 4212,
4219
Lasonic
4108
Lenco
4024, 4001, 4049,
4215, 4219, 4217
Leng
4013
Lennox
4048
Lenson
4218
Lexus
4053
LG
4103, 4107, 4049
Lifesat
4024, 4008, 4212,
4217
Lifetec
4008
Lorenzen
4219
Lorraine
4049
Lupus
4024, 4008
Luxor
4218
Lyonnaise
4052
Macab
4052
Magnavox
4127, 4101
Manata
4031, 4216, 4217
Manhattan
4006, 4010, 4048,
4216
Marantz
4055
Mascom
4010
Maspro
4006, 4217
Matsui
4216
Max
4219
Mediabox
4213
Mediamarkt
4011
Mediasat
4009, 4213, 4218
Medion
4024, 4008, 4217
Medison
4217
Mega
4055, 4053
Memorex
4127
Metronic
4031, 4028, 4001,
4004, 4005, 4010,
4217
Metz
4015
Micro electronic 4218, 4219, 4217
Micro Technology 4217
MicroGem
4106
Micromaxx
4024, 4008
Microstar
4008
Microtec
4217
Minerva
4015
Mitsubishi
4006, 4015, 4202
Mitsumi
4054
Morgan’s
4011, 4054, 4055,
4053, 4217
Motorola
4090, 4091, 4088,
4019
Multichoice
4222
Multitec
4212
Muratto
4049
Mysat
4217
Navex
4013
viii
Neuhaus
Neusat
Next Level
NextWave
Nikko
Nokia
Nordmende
Nova
Novis
Oceanic
Octagon
Okano
Optex
Optus
Orbitech
OSat
Otto Versand
Pace
Pacific
Packsat
Palcom
Palladium
Palsat
Panasat
Panasonic
Panda
Pansat
Patriot
Paysat
PCT
Philco
Philips
Phoenix
Phonotrend
Pioneer
Polsat
Predki
Premiere
Priesner
Primestar
Profile
Promax
Prosat
Proscan
Protek
Proton
Provision
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA
Realistic
Redpoint
Redstar
RFT
Roadstar
ix
4009, 4048, 4218,
4219, 4217
4217
4019
4223
4011, 4217
4006, 4040
4001, 4006, 4007,
4010, 4052
4222
4013
4051
4001, 4004, 4050
4011
4048
4213, 4222, 4223
4001, 4212, 4213,
4218
4004
4015
4006, 4015, 4035,
4043, 4047, 4216
4051
4216
4007
4011, 4218
4212, 4218
4222
4121, 4126, 4124,
4006, 4035, 4036,
4221, 4198
4006, 4219
4125
4216
4127
4110
4101
4071, 4068, 4127,
4006, 4055, 4053,
4061, 4033, 4213,
4216, 4196, 4202,
4203, 4201, 4206
4050
4006, 4005, 4048
4046, 4213
4052
4013
4048, 4213
4011
4076
4216
4006
4007, 4005
4093, 4066, 4122,
4197
4051
4016
4010
4024, 4007, 4005,
4008, 4216
4015, 4215, 4219
4052
4019
4055, 4053
4014, 4037
4004
4093, 4066, 4112,
4113, 4118, 4119,
4116, 4122, 4197,
4207
4078
4009
4024, 4008
4005, 4055, 4053
4217
Roch
Rover
Saba
4031
4024, 4217
4010, 4215, 4219,
4216
Sabre
4006
Sagem
4023, 4052
Sakura
4050
Samsung
4064, 4071, 4069,
4123, 4120, 4003,
4000, 4001, 4032,
4196, 4200
SAT
4007, 4218
Sat Cruiser
4223
Sat Partner
4001, 4004, 4010,
4013, 4049, 4218
Sat Team
4217
Satcom
4012, 4219
Satec
4217
Satelco
4024
Satford
4012
Satmaster
4012
Satplus
4212
Schneider
4008, 4212, 4216
Schwaiger
4051, 4212, 4219
SCS
4215
Seemann
4011, 4009, 4014
SEG
4024, 4001, 4008,
4013
Seleco
4048
Servi Sat
4031, 4217
Siemens
4015
Silva
4049
Skantin
4217
Skardin
4009
Skinsat
4218
SKR
4217
Skymaster
4017, 4022, 4005,
4212, 4217
Skymax
4055, 4053
SkySat
4212, 4218, 4219,
4217
Skyvision
4048
SM Electronic 4212, 4217
Smart
4215, 4217
Sony
4067, 4070, 4213
SR
4011, 4054
Star Choice
4019
Starland
4217
Starring
4013
Start Trak
4001
Strong
4024, 4001, 4004,
4008, 4049, 4222
STS
4115
STVI
4031
Sumida
4011
Sunny Sound 4024
Sunsat
4217
Sunstar
4024, 4011, 4054
Supermax
4223
Tandberg
4052
Tandy
4004
Tantec
4006
TCM
4008
Techniland
4012
TechniSat
4021, 4026, 4027,
4014, 4053, 4038,
4039, 4212, 4213,
4218
Technology
4222
Technosat
4223
Technowelt
4219
Teco
4011, 4054
Telanor
4007
Telasat
4215, 4219
Telecom
4217
Telefunken
Teleka
Telemaster
Telesat
Telestar
Televes
Telewire
Tempo
Tevion
Thomson
Thorens
Thorn
Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
Variosat
Vega
Ventana
Viewsat
Visiosat
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac
4017, 4001, 4216
4004, 4011, 4014,
4218, 4219
4010
4219
4212, 4213, 4218
4006, 4218
4048
4223
4008, 4217
4020, 4006, 4052,
4058, 4208, 4215,
4213, 4219, 4216,
4217
4051
4006
4104
4196
4053
4006, 4012, 4048,
4218, 4217
4194, 4202, 4203
4049
4218
4015, 4215, 4218,
4217
4217
4214
4031, 4217
4222
4212
4070
4079, 4127
4011, 4050, 4053
4013
4015, 4215, 4219
4016
4015
4024
4055, 4053
4098
4013, 4048, 4216,
4217
4019
4001
4212
4212, 4218
4006
4006
4013
4006, 4014, 4015,
4218, 4219
4010
4216
4024
4217
4024, 4010, 4008,
4209, 4215
4102, 4107, 4195
4004
CD player
Yamaha
5082, 5095
CD recorder
Yamaha
5083
MD recorder
Yamaha
5080, 5081, 5086
Tape deck
Yamaha
5084, 5087
LD player
Yamaha
2080
© 2010 Yamaha Corporation
Printed in Malaysia
WV17360