Sharp KC-930EKW Specifications

R
KC-930E
LUFTREINIGER
BEDIENUNGSANLEITUNG
PURIFICATEUR D'AIR
MANUEL D'UTILISATION
Free standing type
KC-930E.indd 1
Воздухоочиститель
РУКОВОДСТВО ПО
ЭКСПЛУАТАЦИИ
ENGLISH
РУССКИЙ
LUCHTREINIGER
GEBRUIKSAANWIJZING
DEUTSCH
OPERATION MANUAL
FRANÇAIS
with Humidifying Function
NEDERLANDS
AIR PURIFIER
ENGLISH
*Plasmacluster is a trademark of Sharp
Corporation.
09.8.4 3:33:50 PM
Please read before operating your new Air Purifier
Some odour ingredients absorbed by the filter may become separated and
may be discharged through the air outlet and result in additional odour. Depending on the usage environment, especially when the product is used in
a condition significantly more severe than household use, this odour may
become strong in a shorter period than expected.
In this case we recommend purchasing the optional replacement filter.
NOTE
• The air purifier is designed to remove air-suspended dust and odour, but not harmful gases (for
example, carbon monoxide contained in cigarette smoke.) If the odour sources still exist, it cannot
completely remove the odour(for example, odours from construction materials and pet odours).
• It is suggested to open the window a bit when you are smoking in order to facilitate ventilation.
Dust Collection / Deodorizing Filter
Elements removed by filter
Dust
pollen, dust, particles of
cigarette smoke, pet dander
Odour
cigarette smoke odour,
household odour (toilet /
raw garbage / pet, etc.)
KC-930E.indd 2
09.8.4 3:33:50 PM
ENGLISH
"Plasmacluster" technology
Plasmacluster technology uses plasma discharge to produce and release
the same positive and negative ions
as those found in nature ("Plasmacluster ions").
This is a unique air cleaning technology of the SHARP CORPORATION
for breaking down and inactivating
such potential allergens as the feacal
matter or corpses of aerial mites*1,
viruses *2 and mold and bacteria *3
suspended in the air, and has been
substantiated by third-party organizations both in Japan and overseas.
When there is a high density of Plasmacluster ions in the air, the smell of
cigarette smoke trapped in curtains
or sofas is removed in about 80 minutes*4, and when clothing is hung in
a place exposed to the direct air expelled from the unit generating Plasmacluster ions, the smell of sweat is
reduced to a virtually imperceptible
level in one night (about 6 hours).
*1 Graduate School of Advanced Sciences of Matter, Hiroshima University,
Japan
Measurement of action on the potential allergens of aerial mites in (13m²)
*2 Retroscreen Virology, Ltd., London, UK
Measurement of ratio of viruses eliminated from the air in a 1m³ box
*3 Ishikawa Health Service Association,
Japan
Measurement of aerial mold and bacteria with an air sampler (13m²)
*4 Japan Spinners Inspecting Foundation,
Japan
Evaluation of deodorizing effect on
odor-imbued fragments of cloth
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS...... E-2
• WARNING..................................................... E-2
• CAUTIONS CONCERNING OPERATION.... E-3
• INSTALLATION GUIDELINES....................... E-3
• FILTER GUIDELINES .................................. E-3
PART NAMES............................................... E-4
• MAIN UNIT DISPLAY.................................... E-4
• ILLUSTRATIVE DIAGRAM........................... E-4
• INCLUDED.................................................... E-5
• BACK............................................................. E-5
PREPARATION............................................. E-6
• FILTER INSTALLATION................................ E-6
• REFILLING THE WATER TANK.................... E-7
OPERATION.................................................. E-8
• MAIN UNIT OPERATION.............................. E-8
ENGLISH
FEATURES
CARE AND MAINTENANCE...................... E-9
• FILTER INDICATOR LIGHT.......................... E-9
• BACK PANEL AND SENSORS..................... E-9
• WATER TANK.............................................. E-10
• UNIT............................................................ E-10
• HUMIDIFYING TRAY.................................. E-11
• HUMIDIFYING FILTER................................ E-12
• FILTER REPLACEMENT GUIDELINES...... E-13
TROUBLESHOOTING............................... E-14
SPECIFICATIONS...................................... E-15
Thank you for purchasing the SHARP Air Purifier. Please read this manual carefully for the
correct usage information. Before using this
product, be sure to read the section: “Important
Safety Instructions.”
After reading this manual, retain it in a convenient location for future reference.
E-1
KC-930E.indd 3
09.8.4 3:33:50 PM
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should be followed, including the
following:
WARNING - To reduce the risk of electrical shock, fire or injury to persons:
• Read all instructions before using the unit.
• Use only a 220-240 volt outlet.
• Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet
is loosened.
• Periodically remove dust from the power plug.
• Do not insert fingers or foreign objects into the intake or air outlet.
• When removing the power plug, always hold the plug and never pull the cord.
Electrical shock and/or fire from short circuit may occur as a result.
• Do not remove the plug when your hands are wet.
• Do not use this unit near gas appliances or fireplaces.
• Remove the power plug from the wall outlet before cleaning the unit and when not using the
unit.
Electrical shock from bad insulation and/or fire from short circuit may occur as a result.
• When refilling the Water Tank, cleaning the unit, or when the unit is not in use, be sure to
unplug the unit. Electrical shock and/or fire from a short circuit may result.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent,
Sharp Authorised Service Centre or similarly qualified person in order to avoid a hazard.
• Do not operate when using aerosol insecticides or in rooms where there is oily residue, incense,
sparks from lit cigarettes, chemical fumes in the air or in very high humidity conditions, such as a
bathroom.
• Be cautious when cleaning the unit. Corrosive cleansers may damage the exterior.
• Only Sharp Authorised Service Centre should service this air purifier. Contact the nearest Service
Centre for any problems, adjustments, or repairs.
• When carrying the unit, remove the Water Tank and Humidifying Tray first and hold the unit by handles on both sides.
• Do not drink the water in the Humidifying Tray or Water Tank.
• Change the water in the Water Tank daily with fresh tap water and regularly clean the Water Tank
and Humidifying Tray. (See E-12 and E-13). When unit is not in use, dispose of the water in the
Water Tank and Humidifying Tray. Leaving water in the Water Tank and/or Humidifying Tray may
result in mold, bacteria, and bad odours.
In rare cases, this bacteria may cause harmful physical effects.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
NOTE - Radio or TV Interference
If this air purifier should cause interference to radio or television reception, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
E-2
KC-930E.indd 4
09.8.4 3:33:51 PM
CAUTIONS CONCERNING OPERATION
ENGLISH
• Do not block the intake and/or air outlet.
• Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into
contact with steam.
• Always operate the unit in an upright position.
• Always hold the handle on both sides of the unit when moving it.
Holding the back panel when carrying may cause it to detach, thus dropping the unit and resulting
in bodily injury.
• Do not operate the unit without the filters, Water Tank, and Humidifying Tray properly installed.
• Do not wash and reuse the filter .
Not only does it not improve filter performance, it may cause electrical shock or malfunction.
• Clean the exterior with a soft cloth only.
Do not use volatile fluids and/or detergents.
The unit surface may be damaged or cracked.
In addition, the sensors may malfunction as a result.
INSTALLATION GUIDELINES
• During the operation of the product, please place the unit at least 2 m away from equipment
utilizing electrical waves such as televisions, radios or wave clocks.
• Avoid use in locations where furniture, fabrics or other items may come in contact with and
restrict the air intake and/or air outlet.
• Avoid use in locations where the unit is exposed to condensation or rapid temperature
changes. (Use under appropriate conditions between 0 and 35˚C in the room.)
(If it is unavoidable please allow unit to stand for 1 hour before switching on.)
• Place on a stable surface with sufficient air circulation.
When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.
• Avoid use in locations where grease or oily smoke is generated (such as in a kitchen, etc.).
The unit surface may crack or the sensor may malfunction as a result.
• Place the unit about 30 cm~60 cm(1~2 ft) away from the wall in order to ensure proper airflow.
The wall directly behind the air outlet may become dirty over time. When using the unit for an extended period of time in the same location, periodically clean the wall and protect the wall with a
vinyl sheet, etc. to prevent the wall from becoming dirty.
FILTER GUIDELINES
• Follow the instructions in this manual for correct care and maintenance of the filters.
Use only filters designed for this product.
E-3
KC-930E.indd 5
09.8.4 3:33:51 PM
PART NAMES
MAIN UNIT DISPLAY
POWER ON/OFF Button
Plasmacluster Ion ON/OFF Button
MODE Button
Humidify Mode
Indicator Light
Filter Reset Button
Filter Indicator Light
Odour
Sensor
Plasmacluster
Ion ON/OFF
Indicator Light
Fan Speed
Indicator Lights
CLEAN SIGN
The odour sensor continuosly monitors
the air and changes colour depending
on air punity.
Green Orange
Clean
Red
Very Impure
ILLUSTRATIVE DIAGRAM
Main Unit Display
Handle
Main Unit
E-4
KC-930E.indd 6
09.8.4 3:33:51 PM
INCLUDED
•Operation manual
BACK
Air Outlet
Handle
Tank Handle
Water Tank
(For humidifying)
Tab
Humidifying Filter
ENGLISH
Filter
(Dust Collection /
Deodorizing Filter)
Back Panel
(Pre-Filter)
Tank Cap
Humidifying Tray
Float
Power Cord
Air outlet
Plug
(Shape of plug depends on country.)
Air Inlet
Date Label
E-5
KC-930E.indd 7
09.8.4 3:33:52 PM
PREPARATION
Be sure to remove the power plug from the wall outlet.
FILTER INSTALLATION
To maintain the quality of the filter, it is installed in the main unit and packed in
plastic bag. Be sure to remove the filter from the plastic bag before using the
unit.
1
Tab
Remove the filter
1
Remove the Back Panel.
Pull the tab at the top of the Back Panel.
the Filter from the
2 Remove
plastic bag.
2
Intall the filter
1
Place the Filter within the main unit.
2
Replace the Back Panel to the main
unit.
Do not install the filter backwards or the unit
will not operate properly.
Date Label
3
Fill in the usage start date on the
Date Label.
Use the date as a guide for the filter replacement schedule.
E-6
KC-930E.indd 8
09.8.4 3:33:52 PM
REFILLING THE WATER TANK
The unit can be used in the Clean Air Mode without
putting water in the Water Tank. When using in the Humidify Mode, the Water Tank should be filled with water.
the Water Tank by unlatching the
1 Remove
top.
the Water Tank Cap and carefully fill
2 Remove
the Water Tank with tap water.
ENGLISH
Change the water in the Water Tank every day with
fresh tap water.
Tank Cap
3 After filling, securely tighten the Tank Cap.
•Check to see that there is no water leaking.
•Be sure to wipe off any excess water on the outside of
the Water Tank.
•When carrying the Water Tank, hold it with both hands
so that the Water Tank opening is facing up.
4 Replace the Water Tank in the unit.
The top latch will “click” in place when the Water Tank is
properly installed.
CAUTION
•Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.
•Do not use hot water (40 ºC), chemical agents, aromatic substances, dirty water, or other
damaging substances, deformation and/or malfunction may occur.
•Use only fresh tap water. Use of other water sources may promote the growth of mold, fungus and/or bacteria.
E-7
KC-930E.indd 9
09.8.4 3:33:53 PM
OPERATION
MAIN UNIT OPERATION
MODE Button
Plasmacluster Ion
ON/OFF Button
Fan Speed Indicator Lights
Plasmacluster Ion Indicator Light
POWER ON/OFF
Button
Please select either Humidify mode or Clean air mode operation when operation when using.
Humidify mode : Fill Water Tank.(See E-00)
Clean Air mode : Drain Water Tank and Humidifying Tray.
Power ON/OFF Button
•Press to start operation (short beep) and stop operation
(long beep)
•Plasmacluster Indicator Light and Fan Speed Indicator
Light turn on/off.
•Unless the power cord has been unplugged, the operations starts in the previous mode it was operated in.
MODE Button
•Press the MODE Button to select the desired fan speed.
Indicator Lights will show the fan speed currently selected.
•The operation mode can be switched as below.
AUTO operation
LOW operation
The fan speed is automatically switched
(between HIGH and LOW) depending on the
amount of impurities in the air. The sensors
detect impurities for efficient air purfication.
The unit will operate quietly using
minimal air intake.
MAX operation
MEDIUM operation
The unit will operate at a fan speed
of MAX.
The unit will operate at a fan speed
of MEDIUM.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn
Plasmacluster Ion Mode ON and OFF.
When Plasmacluster Ion is ON, the Plasmacluster Ion
Indicator Light will turn on.(blue)
E-8
KC-930E.indd 10
09.8.4 3:33:54 PM
CARE AND MAINTENANCE
To maintain optimum performance of this air purifier, please clean the unit including
the sensor and filters periodically.
When cleaning the unit, be sure to first unplug the power cord, and never handle the
plug with wet hands. Electrical shock and/or bodily injury may occur as a result.
FILTER INDICATOR LIGHT
Care Cycle
After 720 hours of use
(30days × 24hours = 720)
The Filter Indicator Light will illuminate as a reminder to perform maintenance of the
Back Panel, Sensors, and Humidifying Filter. The Indicator Light will turn on after approximately 720 hours of use.
After performing maintenance, reset the Filter
Indicator.
Plug the unit in, turn power ON.
ENGLISH
1
2
Press the RESET button for 3 seconds.
•The Filter Indicator Light will go off.
•Even if the Filter Indicator Light is already off, the RESET
button should be pressed to reset the maintenance timer.
BACK PANEL and SENSORS
Care Cycle
Whenever dust accumulates
on the unit or every 2 months
Gently remove dust from the sensor opening and the back panel, using a vacuum
cleaner attachment or similar tool.
<When the back panel has stubborn dirt>
case of heavy dirt, soak the back panel in water with a small amount of kitchen
1 Indetergent.
(Approx. 10min.)
(Avoid scrubbing the back panel hard when washing.)
the back panel repeatedly with clean water to remove
the solution residue.
2 Rinse
3 Drip dry filter to remove excess water.
Back Panel
E-9
KC-930E.indd 11
09.8.4 3:33:54 PM
CARE AND MAINTENANCE
WATER TANK
Care Cycle
Every day when Humidifying
Tank Cap
Rinse the inside of the tank by leaving a small amount of lukewarm water inside, closing the tank cap firmly, and shaking
the tank. Mild household detergents may be used to clean the
inside of the tank, but detergent should be diluted and the tank
should be thoroughly rinsed to remove all detergent residue.
Water Tank
(Note the Water Tank is not dishwasher safe.)
UNIT
Care Cycle Whenever dust accumulates on the unit or every 2 months
To prevent dirt or stains on the unit, clean regularly. If stains are allowed to remain, they may
become difficult to remove.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
E-10
KC-930E.indd 12
09.8.4 3:33:54 PM
HUMIDIFYING TRAY
Care Cycle
1 month
Frequency of maintenance cycle will depend on the hardness
of the water. Avoid spilling water when removing or cleaning
the tray.
the Water Tank and Humidifying
1 Remove
Tray.
Unlatch the Water
Tank first, then remove the tray. Use
both hands when
pulling out the Hum i d i f y i n g Tr a y t o
avoid spilling water.
When Water Deposits are Difficult to Remove
Humidifying Tray halfway with lukewarm water,
1 Fill
add a small amount of mild
kitchen detergent, and leave
to soak for about 30 minutes.
the Humidifying Filter from the
Humidifying Tray. Drain accumulated wa2 Remove
ter by tilting the Humidifying Tray slowly.
ENGLISH
Dilute detergent according to
instructions on the container.
Clean difficult-to-reach parts
with a cotton swab or tooth
brush.
the Humidifying
2 Rinse
Tray with lukewarm water.
Humidifying Filter
Humidifying Tray
• Rinse until all detergent residue
is removed.
• Inadequate rinsing may cause
the detergent odour or changes
in the shape/colour of the main
unit.
the inside of the Humidifying
3 Rinse
Tray with lukewarm water to remove
impurities.
CAUTION
•Do not remove the Styrofoam float.
•Clean difficult-to-reach parts with a cottontipped swab or tooth brush.
If the Styrofoam float comes off,
replace by inserting the tabs of
the Float into the holes in the
Humidifying Tray as shown in the
diagram.
•Use only mild kitchen detergents to
clean the Humidifying Tray. Use of
non-designated chemicals or detergents can cause deformation, tarnishing, cracking (water leakage).
Insert the float below
this tab.
Insert the tab of the
float into the hole.
Insert the tab on
the other side of the
float into the hole.
E-11
KC-930E.indd 13
09.8.4 3:33:55 PM
CARE AND MAINTENANCE
When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with
wet hands. Electrical shock and/or bodily injury may occur as a result.
HUMIDIFYING FILTER
Care Cycle
Once a month or when the Filter Indicator Light is on.
Frequency of maintenance cycle will depend on the hardness or the impurities of the water that
you use; the harder the water the more often descaling will be necessary.
Pay attention not to spill water when cleaning the filter.
the Water Tank and
the Humidifying Filter re1 Remove
5 Rinse
Humidifying Tray.
peatedly with lukewarm water
(See E-11)
to remove all the solution residue.
Inadequate rinsing may cause odour and
affect the performance and/or appearance of the unit.
*Do not scrub the Humidifying Filter, rinse
gently under lukewarm
water only.
the Humidifying Filter
2 Remove
from the Humidifying Tray.
Avoid spilling water from the Humidifying
Tray.
the descaling soluthe Humidifying Filter
3 Preparing
tion.
6 Attach
to the Humidifying Tray, and
Citric acid, available at some drugstores,
or 100 % bottled lemon juice are used for
descaling. Choose either one to use, and
prepare the descaling solution.
<For using citric acid>
Dissolve 3 teaspoons of citric acid and 2
1/2 cups of lukewarm water in a suitable
container, and stir well.
<For using lemon juice>
100 % bottled lemon juice can be used
for descaling. Use only 100 % bottled
lemon juice with no pulp (strain juice if
necessary). Combine 1/4 cup lemon juice
and 3 cups of lukewarm water in a container large enough to hold the Humidifying Filter and stir well.
replace the Humidifying Tray in
the unit.
•The Humidifying Filter dose not
need to be oriented in any particular
position(forward/backward, up/down)
•When not using
the unit for a long
periods of time,
dry the Humidifying Filter completely before
replacing.
in the unit, turn power
7 Plug
ON, and press the Filter Reset
the Humidifying Filter
4 Pre-soak
in the solution for 30 minutes
before cleaning.
When using lemon juice, it is recommended to pre-soak longer than citric acid.
Button on the display for more
than 3 seconds to reset.
You may notice reddish-brown or
white deposits forming on the surface
of the Humidifying Filter. These impurities (calcium, etc.) are due to the impurities contained in tap water; this is
not a defect. Replace the Humidifying
Filter when it is covered completely in
white deposits.
E-12
KC-930E.indd 14
09.8.4 3:33:55 PM
FILTER REPLACEMENT GUIDELINES
Filter life vary depending on the room environment, usage, and location
of the unit.
If dust or odour persist, replace the filter.
(Refer to “Please read before operating your new Air Purifier”)
Guide for filter replacement timing
•The following filter life and replacement period is based on the condition of smoking 5
cigarettes per day and the dust collection/deodorization power is reduced by half compared
with that of new filter.
We recommend to replace the filter more frequently if the product is used in a condition significantly severer than normal household use.
•Dust Collection / Deodorizing Filter
•Humidifying Filter
About 2 years after opening
About 1 years after opening
ENGLISH
REPLACING THE FILTER
page E-6,7 and E-11,12 for
1 See
directions on how to install the
filter when replacing.
in the usage start date of the
2 Fill
filter on the Date Label.
Date Label
Replacement Filters
Model : FZ-Y30SFE
•Dust Collection / Deodorizing Filter : 1 unit
Model : FZ-Y30MFE
•Humidifying filter : 1 unit
Humidifying Filter
Dust Collection /
Deodorizing Filter
Please consult your dealer for purchase of replacement filter.
Disposal of Filter
Please dispose of the replaced filter according to the local disposal laws and regulations.
Dust Collection / Deodorizing Filter materials :
•Filter : Polypropylene
•Frame : Polyester
•Deodorizer : Activated charcoal
Humidifying Filter materials :
•Rayon, Polyester
E-13
KC-930E.indd 15
09.8.4 3:33:56 PM
TROUBLESHOOTING
Before calling for service, please review the Troubleshooting chart below, since the problem may not
be a unit malfunction.
REMEDY (not a malfunction)
SYMPTOM
Odours and smoke are not
removed.
•C
lean or replace the filters if they appear to be heavily soiled.
(See E-9,E-14)
The Clean Sign illuminates
green even when the air is
impure.
•T
he air could be impure at the time the unit was plugged in.
Unplug the unit, wait one minute, and plug the unit in again.
The Clean Sign illuminates
orange or red even when the
air is clean.
• Sensor operation is affected if the odour sensor openings are dirty or
clogged. Gently clean the dust sensors.
(See E-9)
A clicking or ticking sound is
heard from the unit.
•C
licking or ticking sounds may be audible when the unit is generating
Plasumacluster ions.
The discharged air has an
odour.
• Check to see if the filter are heavily soiled.
• Clean or replace the filter.
• Plasmacluster Air Purifiers emit small traces of ozone which may
produce an odour.
The unit does not operate
when cigarette smoke is in
the air.
• Is the unit installed in a location that is difficult for the sensor to detect cigarette smoke?
• Are the dust sensor openings blocked or clogged?
(In this case, clean the openings.) (See E-9)
Filter Indicator Light is
illuminated.
• After replacing filters, connect the power cord to an outlet and press
the Filter Reset Button.
(See E-9)
The Clean Sign are turned
off.
• Check to see if the Lights OFF Mode selected. If so, then press the
Lights Control Button to activate the indicator lights.
(See E-10)
The Humidify Mode Indicator
Light does not illuminate
when the tank is not empty.
• Check Styrofoam float for impurities. Clean the HumidifyingTray. Ensure unit is located on a level surface.
Water level in the tank does
not decrease or decreases
slowly.
• Check to see if the Humidifying Tray and Water Tank are correctly
installed. Check the Humidifying Filter.
• C l e a n o r r e p l a c e t h e f i l t e r w h e n i t i s h e a v i l y s o i l e d .
(See E-11, E-12, E-13)
The Clean Sign lights change
colour frequently.
• The Clean Sign lights automatically change colours as impurities are
detected by the dust sensor and odour sensor.
Flashing of the Fan Speed
Indicator Light ' '.
• Abnormal fan motor
• Turn power OFF to cancel the error
display, wait one minute, and then turn
power ON.
E-14
KC-930E.indd 16
09.8.4 3:33:56 PM
SPECIFICATIONS
KC-930E
220-240V 50/60Hz
Model
MAX
27W
MED
13W
LOW
4.5W
180m3/hour
350ml/hour
126m3/hour
60m3/hour
140ml/hour
Recommended Room Size
High density Plasmacluster ion
recommended room size
Water tank capacity
250ml/hour
~21m2 *1
~17m2 *2
2.1L
odour sensor
Dust Collection / Deodorizing Filter
Sensor
Filter type
Cord Length
2.0m
375mm(W)x205mm(D)x535mm(H)
6.1kg
Dimensions
Weight
*1 Size of a room which is appropriate for operating the unit at maximum fan speed.
•It indicates the space where a certain amount of dust particles can be removed in 30
minutes(JEM1467).
ENGLISH
Power supply
Fan Speed Adjustment
Fan Speed Rated Power
operation Fan Speed
Humidification
*2 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the floor) when the product is
placed next to a wall and run at the MAX operation position.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 0.9W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
The class of the HEPA filter by EN 1822 is H10.
E-15
KC-930E.indd 17
09.8.4 3:33:56 PM
Memo
KC-930E.indd 18
09.8.4 3:33:56 PM
ENGLISH
KC-930E.indd 19
09.8.4 3:33:56 PM
SHARP CORPORATION
OSAKA, JAPAN
Printed in China
TINS-A334KKRZ
KC-930E.indd 20
09H
1
09.8.4 3:33:56 PM