Zanussi ZEV6646XBA User manual

EN
User manual
Hob
ZEV6646XBA
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
2
5
7
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Subject to change without notice
Safety information
For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully
know the operation and safety functions of the appliance.
Children and vulnerable people safety
Warning! Do not let persons, children included, with
reduced physical sensory, reduced mental functions
or lack of experience and knowledge to use the appliance.
They must have supervision or instruction for the
operation of the appliance by a person who is responsible
for their safety.
• Keep all packaging away from children. There is the
risk of suffocation or injury.
• Keep the children away from the appliance during and
after the operation, until the appliance is cold.
Warning! Activate the child safety device to prevent
small children and pets from an accidental
activation of the appliance.
Safety during operation
• Remove all packaging, stickers and layers from the appliance before the first use.
• Set the cooking zones to "off" after each use.
• The Risk of burns! Do not put cutlery or saucepan lids
on the surface that you cook, as they can become hot.
Warning! Fire risk! Too hot fats and oils can occur
with ignition very quickly.
Correct operation
• Always monitor the appliance during operation.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a storage surface.
• Do not put or keep very flammable liquids and materials, easy fusible objects (made of plastic or aluminium)
on or near the appliance.
• Be careful when you connect the appliance to the near
sockets. Do not let the electricity bonds touch the appliance or hot cookware. Do not let the electricity
bonds to tangle.
How to prevent a damage to the appliance
• If the objects or cookware fall on the glass ceramic, the
surface can be damaged.
• Cookware made of cast iron, cast aluminium or with
damaged bottoms can cause scratch of the glass ceramic. Do not move them on the surface.
• Do not let cookware boil dry to prevent the damage to
cookware and glass.
• Do not use the cooking zones with empty cookware or
without cookware.
• Do not put the aluminium foil on the appliance.
Warning! If there is a crack on the surface,
disconnect power supply to prevent the electrical
shock.
Installation instructions
Before the installation, note down the serial number
(Ser. Nr.) from the rating plate.The rating plate of
the appliance is on its lower casing.
2
ZEV6646XBA
220-240 V 50-60 Hz
58 HAD 47 AO
ZANUSSI
949 595 522 00
7 kW
The Safety Instructions
Warning! You must read these!
• Make sure that the appliance is not damaged because
of transportation. Do not connect a damaged appliance.
If it is necessary, speak to the supplier.
• Only an authorized servicing technician can install,
connect or repair this appliance. Use only original
spare parts.
• Only use the built-in appliances after you assemble the
appliance into correct built-in units and work surfaces
that align to the standards.
• Do not change the specifications or change this product. Risk of injury and damage to the appliance.
• Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!
• Keep the minimum distances to other appliances and
units!
• Install shock protection, for example install the drawers
only with a protective floor directly below the appliance!
• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
• Seal the appliance to the work top with no space between with a correct sealant!
• Keep safe the bottom of the appliance from steam and
moisture, e.g. from a dishwasher or oven!
• Do not install the appliance adjacent to doors and below windows! If not, when you open the doors or windows they can push off hot cookware from the appliance.
Warning! Risk of injury from electrical current.
Carefully obey the instructions for electrical
connections.
•
•
•
•
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Install correctly to give shock protection.
Loose and incorrect plug and socket connections can
make the terminal become too hot.
• A qualified electrician must install the connections in
the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single phase or two phase connection.
• Replace the damaged mains cable with a special cable
(type H05BB-F Tmax 90°C; or higher). Speak to your
local Service Centre.
The appliance must have the electrical installation which
lets you disconnect the appliance from the mains at all
poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting
cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
3
Assembly
min.
500mm
min.
50mm
min.
50mm
R 5mm
600mm
=
490+1mm
560+1mm
=
min.
25 mm
min.
20 mm
4
min.
28 mm
If you use a protection box (the additional accessory1)), the protective floor directly below the appliance is not necessary.
You can not use the protection box if you install the appliance above an oven.
Product description
General overview
1
145
mm
120/210
mm
5
2
265
1 Cooking zone 1200 W
2 Oval cooking zone 1500/2400 W
170
mm
mm
145
mm
3
3 Cooking zone 1200 W
4 Control panel
5 Double cooking zone 750/2200 W
4
1) The protection box accessory may not be available in some countries. Please contact your local supplier.
5
Control panel layout
1
2
3
10
4
9
5
6
7
8
Use the sensor fields to operate the appliance. The displays indicators and sounds tell
which functions operate.
sensor field
function
1
It activates and deactivates the appliance
2
It locks/unlocks the control panel
3
A heat setting display
It shows the heat setting
4
Cooking zones' indicators of timer
It shows for which cooking zone you set the time
5
The timer display
It shows the time in minutes
It increases or decreases the heat setting
/
6
It activates and deactivates the outer ring
7
It increases or decreases the time
/
8
9
It selects the cooking zone
10
It activates and deactivates the outer rings
Heat setting displays
Display
Description
The cooking zone is deactivated.
-
The cooking zone operates.
The Keep Warm function operates.
The Automatic Heat Up function operates.
There is a malfunction.
A cooking zone stays hot (residual heat).
Lock / the Child Safety Device operates.
The Automatic Switch Off operates.
6
Residual heat indicator
Warning!
The risk of burns from residual heat!
Operating instructions
Activation and deactivation
Touch
ance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc.).
The sound operates some time and the appliance deactivates. Remove the object or clean the control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time
comes on and the appliance deactivates. See the table.
for 1 second to activate or deactivate the appli-
Automatic Switch Off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated
.
• You do not set the heat setting after you activate the
appliance.
The times of Automatic Switch Off
Heat setting
The cooking zone deactivates after
,
-
6 hours
-
-
5 hours
The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. The display shows the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension of
the cookware.
To activate the outer ring touch the sensor field /
. The indicator comes on. For more outer rings touch the
same sensor field again. The subsequent indicator comes
on.
Do the procedure again to deactivate the outer ring. The
indicator goes out.
4 hours
1.5 hours
Automatic Heat Up
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This function
sets the highest heat setting for some time (see the illustration), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function the cooking zone
must be cold (no
in the display). Touch
of the
cooking zone again and again until the necessary heat set7
ting comes on. After 3 seconds
play.
To stop the function touch
.
comes on in the dis-
Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch
again and again until the indicator of a necessary cooking zone comes on.
• To activate or change the Timer: touch
or
of the
timer to set the time ( 00 - 99 minutes). When the
indicator of the cooking zone starts to flash slow, the
time counts down.
• To deactivate the Timer: set the cooking zone with
and touch
to deactivate the Timer. The remaining
time counts back to 00 . The indicator of the cooking
zone goes out.
• To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
When the time comes to an end, the sound operates and
00 flashes. The cooking zone deactivates.
• To stop the sound: touch
You can use the Timer as a minute minder while the cook. Touch
or
to
ing zones do not operate. Touch
set the time. When the time comes to an end, the sound
operates and 00 flashes
• To stop the sound: touch
First set the heat setting.
comes
To start this function touch . The symbol
on for 4 seconds.
The Timer stays on.
To stop this function touch . The heat setting that you
set before comes on.
When you stop the appliance, you also stop this function.
The child safety device
This function prevents an accidental operation of the appliance.
To activate the child safety device
• Activate the appliance with
. Do not set the heat
settings.
• Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
.
To deactivate the child safety device
• Activate the appliance with
. Do not set the heat
settings. Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
.
To override the child safety device for only one cooking
time
• Activate the appliance with
. The symbol
comes
on.
• Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the appliance.
• When you deactivate the appliance with
, the child
safety device operates again.
Lock
When the cooking zones operate, you can lock the control
panel, but not
. It prevents an accidental change of the
heat setting.
Helpful hints and tips
Cookware
• The bottom of the cookware must be as thick and
flat as possible.
• Cookware made of enamelled steel and with aluminium or copper bottoms can cause the color
change on the glass-ceramic surface.
8
Energy saving
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start
it.
• Stop the cooking zones before the end of the
cooking time to use residual heat.
• The bottom of pans and cooking zones must
have the same dimension.
Heat
setting
The Examples of cooking applications
The data in the table is for guidance only.
Use to:
Time
Hints
Keep warm the food you cooked
as required
Put a lid on a cookware
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine
5-25 min
Mix from time to time
1-2
Solidify: fluffy omelettes, baked eggs
10-40 min Cook with a lid on
2-3
Simmer rice and milkbased dishes, heating up
ready-cooked meals
25-50 min Add the minimum twice as much liquid as
rice, mix milk dishes part procedure
through
3-4
Steam vegetables, fish, meat
20-45 min Add some tablespoons of liquid
4-5
Steam potatoes
20-60 min Use max. ¼ l water for 750 g of potatoes
4-5
Cook larger quantities of food, stews and soups 60-150
min
Up to 3 l liquid plus ingredients
6-7
Gentle fry: escalope, veal cordon bleu, cutlets,
rissoles, sausages, liver, roux, eggs, pancakes,
doughnuts
as necessary
Turn halfway through
7-8
Heavy fry, hash browns, loin steaks, steaks
5-15 min
Turn halfway through
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
1
Information on acrylamides
Important! According to the newest scientific knowledge, if
you brown food (specially the one which contains starch),
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! The sharp objects and abrasive cleaning
agents can cause damage to the appliance.
For your safety, do not clean the appliance with steam
cleaners or high-pressure cleaners.
Scratches or dark stains on the glass-ceramic cause
no effect on how the appliance operates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil,
and food with sugar. If not, the dirt can cause
2.
3.
damage to the appliance. Use a special scraper
for the glass . Put the scraper on the glass surface
at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool:
limescale rings , water rings, fat stains, shiny
metallic discolorations. Use a special cleaning
agent for glass ceramic or stainless steel.
Clean the appliance with a moist cloth and some detergent.
At the end rub the appliance dry with a clean cloth.
9
What to do if…
Problem
Possible cause and remedy
You cannot activate the appliance or
operate it.
• Activate the appliance again and set the heat setting in 10 seconds.
• You touched 2 or more sensor fields at the same time. Only touch one
sensor field.
• The Child Safety Device or the Lock operates. See the chapter Operating
instructions.
• There is water or fat stains on the control panel. Clean the control panel.
A Sound operates and the appliance
deactivates.
A sound operates when the appliance
is deactivated.
You put something on one or more sensor fields. Remove the object from the
sensor fields.
The appliance deactivates.
You put something on the
The residual heat indicator does not
comes on.
The cooking zone is not hot because it operated only for a short time. If the
cooking zone should be hot, speak to the service centre.
The Automatic Heat Up function does
not operate.
• There is still residual heat on the cooking zone. Let the cooking zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the same power as the Automatic Heat Up function.
• You decreased the heat setting from
. Start from
and only increase
the heat setting.
You cannot activate outer ring.
Activate the inner ring first.
The sensor fields become hot.
The cookware is too large or you out it too near to the controls. Put large
cookware on the rear cooking zones if it is necessary.
. Remove object from the sensor field.
comes on
The Automatic Switch Off operates. Deactivate the appliance and activate it
again.
and number comes on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some time. Disconnect
the fuse from the electrical system of the house. Connect again. If
comes
on again, speak to the service centre.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service.
Give the data from the rating plate, three digit letter code
for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not the
servicing by a customer service technician or dealer will
not be free of charge, also during the warranty period. The
instructions about the customer service and conditions of
guarantee are in the guarantee booklet.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
10
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic components
are identified by marking: >PE<,>PS<, etc. Discard the
packaging materials as household waste at the waste disposal facilities in your municipality.
11
892947870-B-072012
www.zanussi.com/shop