- No category
advertisement
▼
Scroll to page 2
of 12
Ordering information DC-DC Converters Value-added type SNDHS50A SNDH S 1 2 50 3 A 05 4 5 1Series name 2Single output 3Output wattage 4A : DC60-160V 5Output voltage MODEL SNDHS50A05 SNDHS50A12 SNDHS50A15 MAX OUTPUT WATTAGE[W] 50.0 50.4 51.0 SNDHS50A24 50.4 DC OUTPUT 5V 10A 12V 4.2A 15V 3.4A 24V 2.1A MODEL SNDHS50A05 SNDHS50A12 SNDHS50A15 SNDHS50A24 VOLTAGE[V] DC60 - 160 SPECIFICATIONS INPUT CURRENT[A] *1 0.55typ 0.55typ 0.55typ 0.55typ EFFICIENCY[%] *1 83.0typ 85.0typ 85.0typ 85.0typ VOLTAGE[V] 5 12 15 24 CURRENT[A] 10 4.2 3.4 2.1 LINE REGULATION[mV] 10max 24max 30max 48max LOAD REGULATION[mV] 150max 100max 100max 100max 0 to +95C *2 80max 120max 120max 120max -20 to 0C *2 120max 150max 150max 150max 0 to 15% Load*2 160max 240max 240max 240max 0 to +95C *2 160max 200max 200max 200max -20 to 0C *2 250max 280max 280max 280max 0 to 15% Load*2 300max 300max 300max 300max 0 to +50C 50max 120max 150max 240max 240max 300max 480max 40max 60max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] -20 to +95C 100max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 20max 200max (DCIN 110V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] 4.50 - 5.50 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 5.00 - 5.15 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 17.25 - 21.75 27.60 - 34.80 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 6.30 - 7.60 13.90 - 17.55 CIRCUIT AND REMOTE SENSING None OTHERS *5 Optional (Required external power source) REMOTE ON/OFF (RC) ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 15mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 15mA, DC500V 50MW min (20±15C) OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE SNDHS ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 *5 *6 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *6 -20 to +95C (Aluminum base plate of the power module), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +95C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CONDUCTED NOISE (at only DC input) Complies with FCC-A, VCCI-A, CISPR22-A, EN55011-A, EN55022-A CASE SIZE/WEIGHT 61.5X44.5X150mm [2.42X1.75X5.91 inches] (WXHXD) / 270g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board with capacitor of 22mF at 150mm [5.91 inches] from output terminal. Refer to the instruction manual 3.2. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual 4.6. Please contact us about optional. Refer to the instruction manual 6.2. SNDHS-2 SNDHS50A External view 10 [0.39] 20.75 10 [0.82] [0.39] 4-f4.5 [4-f0.177] Mounting hole Terminal cover M4 8.6 [0.34] +Vin -Vin Connector for remote ON/OFF (optional) FG TB1 [0.66] Voltage adjust [5.23] 132.81 [5.51±0.02] 139.84 ±0.5 16.75 CN2 PointB 2 [1.51] TB2 8.7 -Vout 8.6 [0.34] 25.65 10 [0.39] [1.01] 5.08 51.34 ±0.5 [0.20] [2.02±0.02] PointA Terminal cover M4 61.5 [2.42] [1.75 max] Power module (DHS50A) 44.5 max [0.2] +Vout [0.34] 38.25 1 5.08 150 [5.91] Name plate ¶ Tolerance : ±1 [±0.04] ¶ Weight : 270g max ¶ Dimensions in mm, [ ]=inches ¶ PCB material/thickness : FR-4 / 1.6mm [0.06] ¶ Base plate material/thickness : Alminum / 3.0mm[0.12] ¶ Mounting torque : 1.6N-m (16.9kgf-cm) max ¶ Component positions and sizes are for your reference if they have no dimensions. ¶ Please connect safety ground to the base plate in f4.5 [f0.177] hole. Base plate SNDHS SNDHS-3 Ordering information DC-DC Converters Value-added type SNDHS100A SNDH S 1 2 100 3 A 05 4 5 1Series name 2Single output 3Output wattage 4A : DC60-160V 5Output voltage MODEL SNDHS100A05 SNDHS100A12 SNDHS100A15 MAX OUTPUT WATTAGE[W] 100.0 100.8 100.5 SNDHS100A24 100.8 DC OUTPUT 5V 20A 12V 8.4A 15V 6.7A 24V 4.2A MODEL SNDHS100A05 SNDHS100A12 SNDHS100A15 SNDHS100A24 VOLTAGE[V] DC60 - 160 SPECIFICATIONS INPUT CURRENT[A] *1 1.1typ 1.1typ 1.1typ 1.1typ EFFICIENCY[%] *1 84.0typ 87.0typ 87.0typ 87.0typ VOLTAGE[V] 5 12 15 24 CURRENT[A] 20 8.4 6.7 4.2 LINE REGULATION[mV] 10max 24max 30max 48max LOAD REGULATION[mV] 150max 100max 100max 100max 0 to +95C *2 80max 120max 120max 120max -20 to 0C *2 120max 150max 150max 150max 0 to 15% Load*2 160max 240max 240max 240max 0 to +95C *2 160max 200max 200max 200max -20 to 0C *2 250max 280max 280max 280max 0 to 15% Load*2 300max 300max 300max 300max 0 to +50C 50max 120max 150max 240max 240max 300max 480max 40max 60max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] -20 to +95C 100max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 20max 200max (DCIN 110V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] 4.50 - 5.50 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 5.00 - 5.15 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 17.25 - 21.75 27.60 - 34.80 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 6.30 - 7.60 13.90 - 17.55 CIRCUIT AND REMOTE SENSING None OTHERS *5 Optional (Required external power source) REMOTE ON/OFF (RC) ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 15mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 15mA, DC500V 50MW min (20±15C) OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE SNDHS ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 *5 *6 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *6 -20 to +95C (Aluminum base plate of the power module), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +95C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CONDUCTED NOISE (at only DC input) Complies with FCC-A, VCCI-A, CISPR22-A, EN55011-A, EN55022-A CASE SIZE/WEIGHT 61.5X44.5X150mm [2.42X1.75X5.91 inches] (WXHXD) / 270g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board with capacitor of 22mF at 150mm [5.91 inches] from output terminal. Refer to the instruction manual 3.2. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual 4.6. Please contact us about optional. Refer to the instruction manual 6.2. SNDHS-4 SNDHS100A External view 10 [0.39] 20.75 10 [0.82] [0.39] 4-f4.5 [4-f0.177] Mounting hole M4 8.6 Connector for remote ON/OFF (optional) [0.34] +Vin -Vin FG Terminal cover TB1 [0.66] Voltage adjust [5.23] 132.81 [5.51±0.02] 139.84 ±0.5 16.75 CN2 PointB 2 [1.51] TB2 -Vout 8.7 [0.2] +Vout 8.6 [0.34] 25.65 10 [0.39] [1.01] 5.08 51.34 ±0.5 [0.2] [2.02±0.02] PointA Terminal cover M4 61.5 [2.42] [1.75 max] Power module (DHS100A) 44.5 max [0.34] 38.25 1 5.08 150 [5.91] Name plate ¶ Tolerance : ±1 [±0.04] ¶ Weight : 270g max ¶ Dimensions in mm, [ ]=inches ¶ PCB material/thickness : FR-4 / 1.6mm [0.06] ¶ Base plate material/thickness : Alminum / 3.0mm[0.12] ¶ Mounting torque : 1.6N-m (16.9kgf-cm) max ¶ Component positions and sizes are for your reference if they have no dimensions. ¶ Please connect safety ground to the base plate in f4.5 [f0.177] hole. Base plate SNDHS SNDHS-5 Ordering information DC-DC Converters Value-added type SNDHS200A SNDH S 1 2 200 3 A 05 4 5 1Series name 2Single output 3Output wattage 4A : DC60-160V 5Output voltage MODEL SNDHS200A05 SNDHS200A12 SNDHS200A15 MAX OUTPUT WATTAGE[W] 200.0 200.4 201.0 SNDHS200A24 201.6 DC OUTPUT 5V 40A 12V 16.7A 15V 13.4A 24V 8.4A MODEL SNDHS200A05 SNDHS200A12 SNDHS200A15 SNDHS200A24 VOLTAGE[V] DC60 - 160 SPECIFICATIONS INPUT CURRENT[A] *1 2.1typ 2.1typ 2.1typ 2.1typ EFFICIENCY[%] *1 87.0typ 87.0typ 87.0typ 87.0typ VOLTAGE[V] 5 12 15 24 CURRENT[A] 40 16.7 13.4 8.4 LINE REGULATION[mV] 10max 24max 30max 48max LOAD REGULATION[mV] 150max 100max 100max 100max 0 to +95C *2 80max 120max 120max 120max -20 to 0C *2 120max 150max 150max 150max 0 to 15% Load*2 160max 240max 240max 240max 0 to +95C *2 160max 200max 200max 200max -20 to 0C *2 250max 280max 280max 280max 0 to 15% Load*2 300max 300max 300max 300max 0 to +50C 50max 120max 150max 240max 240max 300max 480max 40max 60max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] -20 to +95C 100max DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 20max 200max (DCIN 110V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] 4.50 - 5.50 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 5.00 - 5.15 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 17.25 - 20.25 27.60 - 32.40 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 6.30 - 7.60 13.90 - 16.35 CIRCUIT AND REMOTE SENSING Provided OTHERS *5 Optional (Required external power source) REMOTE ON/OFF (RC) ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 15mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 15mA, DC500V 50MW min (20±15C) OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE SNDHS ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 *5 *6 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *6 -20 to +95C (Aluminum base plate of the power module), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +95C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CONDUCTED NOISE (at only DC input) Complies with FCC-A, VCCI-A, CISPR22-A, EN55011-A, EN55022-A CASE SIZE/WEIGHT 74.2X44.5X150mm [2.92X1.75X5.91 inches](WXHXD) / 390g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board with capacitor of 22mF at 150mm [5.91 inches] from output terminal. Refer to the instruction manual 3.2. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual 4.6. Please contact us about optional. Refer to the instruction manual 6.2. SNDHS-6 SNDHS200A External view 10 [0.39] 10 27 [1.06] [0.39] 8.6 Connector for remote ON/OFF (optional) M4 [0.34] +Vin -Vin FG [5.27] 133.9 [5.51±0.02] 1 TB2 -Vout 8.6 M4 [0.34] 22 10 [0.87] [0.39] 10 PointA Terminal cover 10 [0.39] [0.39] 5.08 64.04 ±0.5 [0.20] [2.52±0.02] 74.2 [2.92] Power module [1.75 max] (DHS200A) 44.5max 8.35 30.3 [1.19] PointB CN2 CN3 2 4 [0.33] 139.84±0.5 7 [0.28] +Vout 5.08 Name plate Voltage adjust [0.20] 150 [5.91] TB1 1 Terminal cover 4-f4.5 [4-f0.177] Mounting hole ¶ Tolerance : ±1 [±0.04] ¶ Weight : 390g max ¶ Dimensions in mm, [ ]=inches ¶ PCB material/thickness : FR-4 / 1.6mm [0.06] ¶ Base plate material/thickness : Alminum / 3.0mm[0.12] ¶ Mounting torque : 1.6N-m (16.9kgf-cm) max ¶ Component positions and sizes are for your reference if they have no dimensions. ¶ Please connect safety ground to the base plate in f4.5 [f0.177] hole. Base plate SNDHS SNDHS-7 Ordering information DC-DC Converters Value-added type SNDHS50B SNDH S 1 2 50 3 B 05 4 5 1Series name 2Single output 3Output wattage 4B : DC200-400V 5Output voltage MODEL SNDHS50B03 SNDHS50B05 SNDHS50B12 SNDHS50B15 SNDHS50B24 MAX OUTPUT WATTAGE[W] 33.0 50.0 50.4 51.0 50.4 SNDHS50B28 50.4 DC OUTPUT 3.3V 10A 5V 10A 12V 4.2A 15V 3.4A 24V 2.1A 28V 1.8A MODEL SNDHS50B03 SNDHS50B05 SNDHS50B12 SNDHS50B15 SNDHS50B24 SNDHS50B28 VOLTAGE[V] DC200 - 400 (Prepare another power supply to the RC1 terminal *5) 0.22typ SPECIFICATIONS INPUT CURRENT[A] *1 0.15typ 0.22typ 0.22typ 0.22typ 0.22typ EFFICIENCY[%] *1 76.0typ 79.0typ 82.0typ 82.0typ 82.0typ 82.0typ VOLTAGE[V] 3.3 5 12 15 24 28 CURRENT[A] 10 10 4.2 3.4 2.1 1.8 LINE REGULATION[mV] 10max 10max 24max 30max 48max 56max LOAD REGULATION[mV] 150max 150max 100max 100max 100max 100max 0 to +95C *2 80max 80max 120max 120max 120max 120max -20 to 0C *2 120max 120max 150max 150max 150max 150max 0 to 15% Load*2 160max 160max 240max 240max 240max 240max 0 to +95C *2 160max 160max 200max 200max 200max 200max -20 to 0C *2 250max 250max 280max 280max 280max 280max 0 to 15% Load*2 300max 300max 300max 300max 300max 300max 0 to +50C 35max 50max 120max 150max 240max 280max -20 to +95C 66max 100max 240max 300max 480max 560max 20max 40max 60max 90max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 200max (DCIN 280V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF (RC1) *6 ISOLATION SAFETY OTHERS *1 *2 *3 *4 *5 *6 *7 4.50 - 5.50 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 3.30 - 3.40 5.00 - 5.15 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 28.00 - 29.12 17.25 - 21.75 27.60 - 34.80 32.20 - 40.60 Works over 105% of rating and recovers automatically 4.20 - 5.70 6.30 - 7.60 13.90 - 17.55 None Provided (Logic H : ON, L :OFF) Required external power source AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE ENVIRONMENT 2.97 - 3.63 INPUT-OUTPUT OUTPUT-FG SNDHS 16max AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *7 -20 to +95C (Aluminum base plate of the power module), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +95C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 61.5X44.5X127mm [2.42X1.75X5.0 inches] (WXHXD) / 220g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board with capacitor of 22mF at 150mm [5.91 inches] from output terminal. Refer to the instruction manual 3.2. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual 4.6. Refer to the instruction manual 2, 4.4 Refer to the instruction manual 4.4 Refer to the instruction manual 6.2 SNDHS-8 SNDHS50B External view Connector for remote ON/OFF (optional) 4-f4.5 [4-f0.177] Mounting hole 4 4 2 1 2 1 +Vin -Vin RC1 CN2 CN1 8.7 CN3 1 2 PointB [0.34] [1.69] [4.60±0.02] [0.74] Voltage adjust 43 116.84 ±0.5 18.7 TB1 -Vout M4 8.6 PointA Terminal cover [0.34] 26.2 10 [1.03] [0.39] 5.08 51.34 ±0.5 [0.20] [2.02±0.02] 61.5 [2.42] [1.75 max] Power module (DHS50B) 44.5 max 5.08 +Vout [0.20] 127 [5.00] Name plate Base plate ¶ Tolerance : ±1 [±0.04] ¶ Weight : 220g max ¶ Dimensions in mm, [ ]=inches ¶ PCB material/thickness : FR-4 / 1.6mm [0.06] ¶ Base plate material/thickness : Alminum / 3.0mm[0.12] ¶ Screw tightening torque : 1.6N-m (16.9kgf-cm) max ¶ Component positions and sizes are for your reference if they have no dimensions. ¶ Please connect safety ground to the base plate in f4.5 [f0.177] hole. SNDHS SNDHS-9 Ordering information DC-DC Converters Value-added type SNDHS100B SNDH S 1 2 100 3 B 05 4 5 1Series name 2Single output 3Output wattage 4B : DC200-400V 5Output voltage MODEL SNDHS100B03 SNDHS100B05 SNDHS100B12 SNDHS100B15 SNDHS100B24 MAX OUTPUT WATTAGE[W] 66.0 100.0 100.8 100.5 100.8 SNDHS100B28 100.8 DC OUTPUT 3.3V 20A 5V 20A 12V 8.4A 15V 6.7A 24V 4.2A 28V 3.6A MODEL SNDHS100B03 SNDHS100B05 SNDHS100B12 SNDHS100B15 SNDHS100B24 SNDHS100B28 VOLTAGE[V] DC200 - 400 (Prepare another power supply to the RC1 terminal *5) 0.42typ SPECIFICATIONS INPUT CURRENT[A] *1 0.30typ 0.44typ 0.42typ 0.42typ 0.42typ EFFICIENCY[%] *1 78.0typ 81.0typ 84.0typ 85.0typ 85.0typ 85.0typ VOLTAGE[V] 3.3 5 12 15 24 28 CURRENT[A] 20 20 8.4 6.7 4.2 3.6 LINE REGULATION[mV] 10max 10max 24max 30max 48max 56max LOAD REGULATION[mV] 150max 150max 100max 100max 100max 100max 0 to +95C *2 80max 80max 120max 120max 120max 120max -20 to 0C *2 120max 120max 150max 150max 150max 150max 0 to 15% Load*2 160max 160max 240max 240max 240max 240max 0 to +95C *2 160max 160max 200max 200max 200max 200max -20 to 0C *2 250max 250max 280max 280max 280max 280max 0 to 15% Load*2 300max 300max 300max 300max 300max 300max 0 to +50C 35max 50max 120max 150max 240max 280max -20 to +95C 66max 100max 240max 300max 480max 560max 20max 40max 60max 90max 90max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 200max (DCIN 280V, Io=100%) *4 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF (RC1) *6 ISOLATION SAFETY OTHERS *1 *2 *3 *4 *5 *6 *7 4.50 - 5.50 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 3.30 - 3.40 5.00 - 5.15 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 28.00 - 29.12 17.25 - 21.75 27.60 - 34.80 32.20 - 40.60 Works over 105% of rating and recovers automatically 4.20 - 5.70 6.30 - 7.60 13.90 - 17.55 None Provided (Logic H : ON, L :OFF) Required external power source AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE ENVIRONMENT 2.97 - 3.63 INPUT-OUTPUT OUTPUT-FG SNDHS 16max AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *7 -20 to +95C (Aluminum base plate of the power module), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +95C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 61.5X44.5X127mm [2.42X1.75X5.0 inches] (WXHXD) / 220g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board with capacitor of 22mF at 150mm [5.91 inches] from output terminal. Refer to the instruction manual 3.2. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual 4.6. Refer to the instruction manual 2, 4.4 Refer to the instruction manual 4.4 Refer to the instruction manual 6.2 SNDHS-10 SNDHS100B External view Connector for remote ON/OFF (optional) 4-f4.5 [4-f0.177] Mounting hole 4 4 2 1 2 1 +Vin -Vin RC1 CN2 CN1 8.7 CN3 1 2 PointB [0.34] [1.69] [4.60±0.02] [0.74] Voltage adjust 43 116.84 ±0.5 18.7 TB1 -Vout M4 8.6 PointA Terminal cover [0.34] 26.2 10 [1.03] [0.39] 5.08 51.34 ±0.5 [0.20] [2.02±0.02] 61.5 [2.42] [1.75 max] Power module (DHS100B) 44.5 max 5.08 +Vout [0.20] 127 [5.00] Name plate Base plate ¶ Tolerance : ±1 [±0.04] ¶ Weight : 220g max ¶ Dimensions in mm, [ ]=inches ¶ PCB material/thickness : FR-4 / 1.6mm [0.06] ¶ Base plate material/thickness : Alminum / 3.0mm[0.12] ¶ Screw tightening torque : 1.6N-m (16.9kgf-cm) max ¶ Component positions and sizes are for your reference if they have no dimensions. ¶ Please connect safety ground to the base plate in f4.5 [f0.177] hole. SNDHS SNDHS-11 Ordering information DC-DC Converters Value-added type SNDHS250B SNDH S 1 2 250 3 B 05 4 5 1Series name 2Single output 3Output wattage 4B : DC200-400V 5Output voltage MODEL SNDHS250B03 SNDHS250B05 SNDHS250B07 SNDHS250B12 SNDHS250B15 SNDHS250B24 SNDHS250B28 SNDHS250B48 MAX OUTPUT WATTAGE[W] 165.0 250.0 247.5 252.0 247.5 252.0 252.0 249.6 DC OUTPUT 3.3V 50A 5V 50A 7.5V 33A 12V 21A 15V 16.5A 24V 10.5A 28V 9.0A 48V 5.2A SPECIFICATIONS INPUT MODEL SNDHS250B03 SNDHS250B05 SNDHS250B07 SNDHS250B12 SNDHS250B15 SNDHS250B24 SNDHS250B28 SNDHS250B48 VOLTAGE[V] DC200 - 400 (Prepare another power supply to the RC1 terminal *5) CURRENT[A] *1 0.67typ 1.0typ 1.0typ 1.0typ 1.0typ 1.0typ 1.0typ 1.0typ EFFICIENCY[%] *1 86.0typ 88.0typ 86.0typ 86.0typ 86.0typ 86.0typ 86.0typ 87.0typ VOLTAGE[V] 3.3 5 7.5 12 15 24 28 48 CURRENT[A] 50 50 33 21 16.5 10.5 9.0 5.2 LINE REGULATION[mV] 10max 10max 20max 24max 30max 48max 56max 96max LOAD REGULATION[mV] 150max 150max 150max 100max 100max 100max 100max 100max 0 to +95C *2 80max 80max 100max 120max 120max 120max 120max 200max -20 to 0C *2 120max 120max 130max 150max 150max 150max 150max 250max 0 to 15% Load*2 160max 160max 200max 240max 240max 240max 240max 400max 0 to +95C *2 160max 160max 200max 200max 200max 200max 200max 250max -20 to 0C *2 250max 250max 280max 280max 280max 280max 280max 400max 0 to 15% Load*2 300max 300max 300max 300max 300max 300max 300max 500max 0 to +50C 35max 50max 70max 120max 150max 240max 280max 480max -20 to +95C 66max 100max 140max 240max 300max 480max 560max 960max 20max 30max 40max 60max 90max 90max 180max RIPPLE[mVp-p] OUTPUT RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] DRIFT[mV] *3 START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 16max 200max (DCIN 280V, Io=100%) 2.97 - 3.63 4.50 - 5.50 6.75 - 8.25 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 43.20 - 52.80 3.30 - 3.40 5.00 - 5.15 7.50 - 7.80 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 28.00 - 29.12 48.00 - 49.92 PROTECTION OVERVOLTAGE PROTECTION[V] 4.20 - 4.85 6.30 - 7.30 8.70 - 10.20 13.90 - 16.35 17.25 - 20.25 CIRCUIT AND REMOTE SENSING Provided OTHERS REMOTE ON/OFF (RC1) *6 Provided (Logic H : ON, L :OFF) Required external power source 27.60 - 32.40 32.20 - 37.80 55.20 - 64.80 *4 OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE SNDHS ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 *5 *6 *7 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *7 -20 to +95C (Aluminum base plate of the power module), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +95C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 74.2X44.5X127mm [2.92X1.75X5.0 inches](WXHXD) / 310g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) At rated input(DC280V) and rated load. Ripple and ripple noise is measured by using measuring board with capacitor of 22mF at 150mm [5.91 inches] from output terminal. Refer to the instruction manual 3.2. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual 4.6. Refer to the instruction manual 2, 4.4 Refer to the instruction manual 4.4 Refer to the instruction manual 6.2 SNDHS-12 SNDHS250B External view Connector for remote ON/OFF (optional) 4-f4.5 [4-f0.177] Mounting hole 4 4 2 1 2 1 +Vin -Vin RC1 CN2 CN1 ±0.5 [4.60±0.02] 116.84 7.4 [0.29] Voltage adjust PointB CN3 12 8.4 [0.33] 31.8 [1.25] 4 CN4 1 TB1 -Vout 8.6 M4 PointA Terminal cover [0.34] 22 10 [0.87] [0.39] 10 10 [0.39] [0.39] 5.08 64.04 [0.20] [2.52±0.02] ±0.5 74.2 [2.92] 44.5 max Power module (DHS250B) [1.75 max] 5.08 +Vout [0.20] 127 [5.00] Name plate Base plate ¶ Tolerance : ±1 [±0.04] ¶ Weight : 310g max ¶ Dimensions in mm, [ ]=inches ¶ PCB material/thickness : FR-4 / 1.6mm [0.06] ¶ Base plate material/thickness : Alminum / 3.0mm[0.12] ¶ Screw tightening torque : 1.6N-m (16.9kgf-cm) max ¶ Component positions and sizes are for your reference if they have no dimensions. ¶ Please connect safety ground to the base plate in f4.5 [f0.177] hole. SNDHS SNDHS-13
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project