a687 Crunch.book Page i Tuesday, February 23, 2010 6:20 PM
S G H - A 6 8 7
P O R T A B L E
M O B I L E
S e r i e s
Q u a d - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
a687 Crunch.book Page ii Tuesday, February 23, 2010 6:20 PM
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
1.888.987.HELP (4357)
Internet Address: www.samsungusa.com
2010 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
©
www.samsungtelecom.com/support
a687_UCJB4_WC_022310_F8
a687 Crunch.book Page iii Tuesday, February 23, 2010 6:20 PM
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Devices purchased for use on AT&T's system are designed for use exclusively on AT&T's system. You agree that you won't make any
modifications to the Equipment or programming to enable the Equipment to operate on any other system. A voice plan is required on all
voice-capable devices, unless specifically noted otherwise in the terms governing your agreement. Some devices or plans may require you
to subscribe to a data plan.
Your phone is designed to make it easy for you to access a wide variety of content. For your protection, AT&T wants you to be aware that
some applications that you enable may involve the location of your phone being shared. For applications available through AT&T, AT&T
offers privacy controls that let you decide how an application may use the location of your phone and other phones on your account.
However, AT&T's privacy tools do not apply to applications available outside of AT&T. Please review the terms and conditions and the
associated privacy policy for each location-based service to learn how location information will be used and protected.
Your phone may be used to access the Internet and to download, and/or purchase goods, applications, and services from AT&T or
elsewhere from third parties. AT&T provides tools for you to control access to the Internet and certain Internet content. These controls may
not be available for certain devices which bypass AT&T controls.
A&T may collect certain types of information from your device when you use AT&T services to provide customer support and to improve its
services. For more information on AT&T's Privacy Policy, visit http://www.att.com/privacy.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit: http://www.samsungnetwork.com/Home/opensource.
a687 Crunch.book Page iv Tuesday, February 23, 2010 6:20 PM
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
a687 Crunch.book Page 1 Tuesday, February 23, 2010 6:20 PM
Table of Contents
Section 1: Getting Started .............................................. 5
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the Phone On or Off . . . . . . . . . . . . . . . . . . . . . . . . .
Locking and Unlocking the Screen . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
7
8
9
9
Section 2: Understanding Your Phone ......................... 10
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Open View of Your Phone . . . . . . . . . . . . . . . . . . . . . . .
Side Views of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
10
12
12
13
Section 3: Menu Navigation ......................................... 16
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Section 4: Entering Text ............................................... 18
Using the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Text Input Mode . . . . . . . . . . . . . . . . . . . . . . . .
Using Fn (numeric) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using SYM (symbol) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
19
19
19
Section 5: Call Functions ............................................. 20
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . 20
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making a Call Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . 21
Making a Call from the Address Book . . . . . . . . . . . . . . . . . .
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Options During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Video Share . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Data Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
22
22
24
25
27
27
Section 6: Changing Your Settings .............................. 29
Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Silent Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Driving Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outdoor Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time & Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring Your Phone’s USB Settings . . . . . . . . . . . . . . . . .
Network Profile Configuration . . . . . . . . . . . . . . . . . . . . . . . .
Applications Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
29
29
31
32
34
36
37
37
43
44
46
47
48
50
51
1
a687 Crunch.book Page 2 Tuesday, February 23, 2010 6:20 PM
Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Section 9: Camera ........................................................ 70
Section 7: Understanding Your Address Book ............ 52
Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Using the Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
AT&T Address Book Activation . . . . . . . . . . . . . . . . . . . . . . . . 52
Address Book Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adding a New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Address Book Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Sync Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Finding My Own Phone Number . . . . . . . . . . . . . . . . . . . . . . . 57
FDN Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Group Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Adding Speed Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Using the Service Dialing Numbers . . . . . . . . . . . . . . . . . . . . . 59
Managing Address Book Entries . . . . . . . . . . . . . . . . . . . . . . . 59
Yellow Pages Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Section 8: My Stuff ....................................................... 63
My Stuff Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Memory Card Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Online Locker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Other Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Used Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2
Section 10: Mobile Video ............................................. 76
Viewing a Video Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Using the Video Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Customizing Mobile Video . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Section 11: Messaging ................................................. 78
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Creating and Sending Messages . . . . . . . . . . . . . . . . . . . . . . 78
Viewing New Received Messages . . . . . . . . . . . . . . . . . . . . . . 79
Using Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Deleting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Using Instant Messaging (IM) . . . . . . . . . . . . . . . . . . . . . . . . . 83
Using Mobile Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Section 12: Games & Applications .............................. 84
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Section 13: AppCenter ................................................. 87
Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Cool Tools/Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
a687 Crunch.book Page 3 Tuesday, February 23, 2010 6:20 PM
Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Color Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Answer Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AppCenter Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
87
87
88
88
88
88
Section 14: AT&T Music ............................................... 89
Accessing AT&T Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shop Music/Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MusicID 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing Music Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Make-UR-Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Music Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
89
89
92
94
96
97
97
98
98
98
Section 15: AT&T GPS .................................................. 99
Shopping for GPS Applications . . . . . . . . . . . . . . . . . . . . . . . . 99
AllSport GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Loopt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Launching AT&T Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Using Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Obtaining Driving Directions . . . . . . . . . . . . . . . . . . . . . . . . . 101
Where . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Section 16: Mobile Web ............................................. 103
Accessing the Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . .
Homepage - att.net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating with the Mobile Web . . . . . . . . . . . . . . . . . . . . . .
Enter a URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Search the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emptying the Cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using your History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the WAP Profiles . . . . . . . . . . . . . . . . . . . . . . . . .
103
103
104
104
105
105
105
105
106
107
107
Section 17: Tools ........................................................ 109
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Record Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
109
109
109
110
111
112
114
114
115
115
115
116
116
117
3
a687 Crunch.book Page 4 Tuesday, February 23, 2010 6:20 PM
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Section 18: Accessibility ............................................ 118
Section 19: Health and Safety Information ............... 119
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 119
Please Note the Following Information When Using
Your Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 121
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 121
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Using Your Phone Near Other Electronic Devices . . . . . . . . . 131
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 133
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 135
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 136
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 136
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Section 20: Warranty Information ............................. 139
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 139
End User License Agreement for Software . . . . . . . . . . . . . . 142
4
Index ............................................................................ 147
a687 Crunch.book Page 5 Tuesday, February 23, 2010 6:20 PM
Section 1: Getting Started
This section explains how to start using your phone by first
configuring your hardware, activating your service, and then
setting up your voice mail.
Setting Up Your Phone
Prior to use it is necessary to install both the battery and SIM into
their corresponding internal compartments. The microSD™ card
slot is also located in this same internal area.
1.
Remove the battery cover by pressing down on the back
cover and sliding the cover in the direction shown (1).
2.
Lift the cover away from the phone (2).
Installing the SIM Card
When you subscribe to a cellular network, you are provided with
a plug-in SIM card loaded with your subscription details, such as
your PIN, available optional services, and many others features.
Important!: The plug-in SIM card information and its contacts can be easily
damaged by scratching or bending, so be careful when handling,
inserting, or removing the card. Keep all SIM cards out of reach
of small children.
䊳
Carefully slide the SIM card into the SIM card socket until the
card locks into place.
• Make sure that the card’s gold contacts face into the phone and
that the upper-left angled corner of the card is positioned as shown.
Getting Started
5
a687 Crunch.book Page 6 Tuesday, February 23, 2010 6:20 PM
Note: If the card is not inserted correctly, the phone does not detect the SIM
card. Re-orient the card back into the slot.
Note: The Samsung a687 has been tested to support up to a 16GB memory
card.
Installing the Memory Card
Installing the Battery
Your phone also supports the use of a memory card (microSD) for
data storage of such things as data, music, pictures, and video
files. This type of memory card is designed for use with this
mobile phone and other devices.
1.
1.
Insert the battery into the opening on the back of the
phone, making sure the connectors align (1).
2.
Gently press down to secure the battery (2).
3.
Replace the battery cover onto the back of the phone (1).
Push the microSD card into the slot until it clicks (as
shown).
• Make sure the microSD’s gold contact pins face upward and the
card is securely inserted.
Correct
Incorrect
6
a687 Crunch.book Page 7 Tuesday, February 23, 2010 6:20 PM
4.
Slide the cover in the direction shown while pressing down
until you hear a light click (2).
Although you can use the phone while the battery is charging,
doing so will require additional charging time.
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery recharges fully in approximately 4 hours.
Using the Travel Adapter
1.
With the battery installed, temporarily remove the plastic
cover (lower right side of phone) and plug in the wall
charger’s connector into the jack.
Important!: Verify that the handset battery is installed prior to connection. If
the battery is not properly installed and the wall charger is
connected, the handset may power off and on continuously,
preventing proper operation.
Note: Make sure the battery is properly installed before switching on the
phone.
Note: The wall charger’s connector attaches to the phone at a slight angle.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. The
Travel Adapter that is used to charge the battery, is included with
your phone. Use only Samsung-approved batteries and chargers.
Note: Long backlight settings, searching for service, vibrate mode, browser
use, and other variables may reduce the battery’s talk and standby
times.
Getting Started
7
a687 Crunch.book Page 8 Tuesday, February 23, 2010 6:20 PM
Note: Failure to unplug the wall charger before you remove the battery, can
cause damage to the phone.
Low Battery Indicator
Incorrect
Correct
2.
Plug the flat end of the Travel Adapter into the Power/
Accessory Interface connector and the other end into a
standard AC wall outlet.
3.
When charging is finished, remove the flat end from the
interface connector jack on the phone.
Warning!: If your device has a touch screen display, please note that a touchscreen responds best to a light touch from the pad of your finger
or a non-metallic stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage the tempered
glass surface and void the warranty. For more information, refer to
“Standard Limited Warranty” on page 139.
8
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
) blinks and the device sounds a
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power by reducing the
backlight’s brightness and entering a dimming mode. For a quick
check of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device’s display. Five
bars (
) indicate a full charge.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
1.
Press and hold
or
until the phone switches on.
The phone launches the activation splash screen and then
proceeds to search for the network. Once the network has
been found, you can make or receive calls.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
“Changing Your Settings” on page 29.
a687 Crunch.book Page 9 Tuesday, February 23, 2010 6:20 PM
2.
Press and hold
until the phone switches off.
2.
Locking and Unlocking the Screen
䊳
To lock the phone screen, slide the phone closed.
When connected, follow the voice prompts from the voice
mail center.
Accessing Your Voice Mail From Another Phone
– or –
1.
Dial your wireless phone number.
To unlock the phone screen when closed, press the Unlock
2.
When you hear your voicemail greeting, press the asterisk
soft key and then press the OK soft key.
You can set your phone to either stop operation or continue
operation whenever you slide your phone closed.
key (*).
3.
Enter your passcode using the QWERTY keypad.
For more information, refer to “Slide Down Setting” on page 39.
Setting Up Your Voice Mail
1.
In Idle mode, press and hold
.
You may be prompted to enter a password.
2.
Follow the tutorial to create a password, record a greeting,
and record your name.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
1.
In Idle mode, press and hold
.
Getting Started
9
a687 Crunch.book Page 10 Tuesday, February 23, 2010 6:20 PM
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that display when the phone is
in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many useful
features. The following list outlines a few of the features included
in your phone.
• User friendly, menu driven access to features and options
• Ready access to the Internet
• Built-in Bluetooth technology
• Improved conversational messaging format
• Instant Messaging capability
• AT&T GPS Navigation functionality provides real-time navigation
• microSD card compatibility for use in data storage and access
• My Stuff feature provides Applications, Audio, Games, Picture, Online
Locker, Tools, Video, Other Files, and Used Space.
Front Open View of Your Phone
1
2
15
14
3
13
4
12
5
11
6
7
8
10
9
10
a687 Crunch.book Page 11 Tuesday, February 23, 2010 6:20 PM
1.
External speaker: allows you to hear the caller.
2.
Display: shows the information needed to operate your
7.
letters, and characters using a full QWERTY keypad
interface.
phone, such as the received signal strength, phone battery
level, time, etc.
3.
screen.
4.
Multitasking key: opens the application switch window
which allows you to select from a group of different
applications without having to exit from the currently
5.
Microphone: allows the other callers to hear you when you
are speaking to them.
9.
Silent mode/Space key: press and hold to place your device
in silent mode. In text entry mode, press to add a space.
10. Messaging: press the Messaging key to compose a text or
multimedia message.
11. Power/End key: ends a call. Press and hold for three
active application. These options include Call, Messaging,
seconds to turn the phone on or off. While in a menu,
Mobile Web, Music Player, Games, and End all.
pressing this key once cancels the current input and twice
Talk/Send key: allows you to power on the phone, make
or answer a call, access your Call History, Call Manager,
6.
8.
Left Soft key: allows you to select soft key actions or menu
items corresponding to the bottom left line on the display
Built in QWERTY Keypad: allows you to enter numbers,
returns the phone to Idle mode.
12. Back key: allows you to return to the previous menu. This
and Call Block features. Press and hold to redial the last
key also allows you to return to the previous page within
phone number.
the Web browser. In Idle mode, press this key to display
Voicemail key: allows you to press and hold to
automatically dial your voicemail.
the Calendar in Month view.
13. Menu access/Confirm key: when navigating through a
menu accepts the highlighted choice in the menu. If you
press once in Idle mode, Mobile Web launches.
Understanding Your Phone
11
a687 Crunch.book Page 12 Tuesday, February 23, 2010 6:20 PM
14. Right Soft key: allows you to select soft key actions or
volume key (
) to mute the ring tone. Press and
menu items corresponding to the bottom right line on the
hold either volume key to reject the call and send it directly
display screen.
to voicemail. Adjusts text size when reading a message or
using the browser located in the Applications folder.
15. Navigation keys: this key allows you to scroll through
phone menu options and provides a shortcut to phone
Headset/Power adapter jack/USB or data cable: allows you
2.
functions from standby mode.
to plug in the travel adapter (power), PC connection cable
Side Views of Your Phone
(data transfer), and optional headset for safe, convenient,
hands-free conversations.
Camera key: allows you to both access the Picture camera
3.
menu and take pictures when you are in camera mode. In
Idle mode, press to launch the camera.
1
Rear View of Your Phone
3
2
1
2
1.
Volume keys: allows you to adjust the ringer volume while
in standby mode or adjust the voice volume during a call.
When receiving an incoming call, briefly press down either
12
1.
Camera lens: is used to take pictures and shoot videos.
2.
Speaker: allows you to hear music.
a687 Crunch.book Page 13 Tuesday, February 23, 2010 6:20 PM
Display Layout
Your display screen provides a wealth of information about the
phone’s status and options.The display has 3 main areas:
Indicates that the Airplane Mode is active. You cannot
send or receive any calls or access online information.
Displays when you are out of your service area.
Indicators
Time and Date
Main Display
Displays when a call is in progress.
Displays within the lock screen when a call has been
missed.
Displays your battery’s charge level. The more bars you
see, the more power you have remaining.
Displays when your connection to an EDGE network is
active.
Soft Key Indicators
Icons
This list identifies the symbols you’ll see on your phone’s display
and Indicator area:
Displays your current signal strength. The greater the
number of bars, the stronger the signal.
Displays when your phone is communicating with the
EDGE network.
Displays when your connection to a 3G network is
active.
Displays when the phone is accessing services in a
3G+ (HSDPA) network. When data is being transferred,
this icon animates.
Understanding Your Phone
13
a687 Crunch.book Page 14 Tuesday, February 23, 2010 6:20 PM
Displays when your phone is communicating with the
3G network.
Displays when an internal microSD memory card is
detected.
Displays when the phone is connected to a computer
via a supported USB cable connection.
Displays within the Indicators area when a new text
message is received.
Displays when the Sound profile is set to Normal.
Displays when the Sound profile is set to silent or the
volume has been manually lowered below level 1.
Displays when the Sound profile is set to Driving.
Displays within the Indicators area when a new
Multimedia message is received.
Displays when the Sound profile is set to Outdoor.
Displays within the Indicators area when a new voice
mail is received.
Displays when Bluetooth is activated.
Displays within the Indicators area when a new WAP
message is received.
Displays when Inbox is full - Text Message.
Displays when you set an alarm to ring at a specified
time. For more information, refer to “Alarms” on
page 111.
14
Displays when Call forwarding is set to Forward always.
For more information, refer to “Call Settings” on
page 43.
Displays when a Bluetooth stereo headset has been
paired with the phone.
Displays when TTY device has been inserted.
Displays when browsing the web.
a687 Crunch.book Page 15 Tuesday, February 23, 2010 6:20 PM
Displays when your Address Book is synchronizing
with the AT&T Address Book, the network backup
service. For more information, refer to “Sync Settings”
on page 56.
Displays when signed on to IM service.
Displays when T-Coil is enabled. For more information,
refer to “T-Coil Mode” on page 42.
For more details on configuring your phone’s settings, see
“Changing Your Settings” on page 29.
Understanding Your Phone
15
a687 Crunch.book Page 16 Tuesday, February 23, 2010 6:20 PM
Section 3: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone. Some menu options are controlled by the SIM
provided by your service provider.
Accessing a Menu Function by Scrolling
1.
Navigation keys to reach a main menu item, Settings for
example. Press the Select soft key or the
Menu Navigation
Menus and sub-menus can be accessed by scrolling through
them using the Navigation keys or by using the shortcut keys.
In Idle mode, press the Menu soft key and scroll using the
key to enter
the menu.
2.
If the menu contains sub-menus, Phone for example, you
can access them by first highlighting the option and then
by pressing the Select soft key or the
key. If the
menu you selected contains further options, repeat this
step.
3.
To scroll through these menus, press either the Up or
Down Navigation key or the Volume key (located on the
left side of your phone). Press the Select soft key or the
key to make your selection.
4.
To return to the previous menu level, press the Back soft
key, the
5.
key.
16
key.
To exit the menu without changing the settings, press the
a687 Crunch.book Page 17 Tuesday, February 23, 2010 6:20 PM
Using Shortcut Numbers
Numbered menu items, such as menus, sub-menus, and options
can be quickly accessed by using their shortcut numbers. In
Menu mode, Main Menus can be accessed by pressing the
number keys (1 to 0, * and #) corresponding to their location on
the screen.
To navigate to the shortcuts:
1.
In Idle mode, press the Shortcuts soft key, and highlight a
2.
Press the
short cut application.
key to access the selected option.
– or –
Press the Options soft key and select one of the following:
Example: Accessing the Music Player.
1.
In Idle mode, press the Menu soft key.
2.
Press the
key for AT&T Music.
3.
Press the
key for Music Player.
The Music Player is displayed.
• Open: open the selected shortcut and displays the submenus,
launches the selected application, or displays a screen.
• Change: changes the currently selected shortcut and assigns
another shortcut to this field.
• Remove: removes the selected shortcut from this field.
• Remove All: removes all the shortcuts from the fields in this menu.
Shortcuts
The Shortcuts option is another way to access applications from
the idle mode without navigating through the main menu icons
and sub menus. There are twelve available shortcuts, seven
preassigned (Bluetooth, Alarms, Recent Calls, Games,
Applications, My Account, and Tools, and five empty shortcuts (8,
9, 0, *, #) you can assign.
Menu Navigation
17
a687 Crunch.book Page 18 Tuesday, February 23, 2010 6:20 PM
Section 4: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the QWERTY keyboard-style
keypad.
This section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes needed to
enter text.
Using the QWERTY Keypad
Your phone has a QWERTY (
) keypad
to support easy and quick text input. You can enter text as you
would when using a computer’s keyboard. To access the
QWERTY keypad, slide your phone open to expose the keypad.
The keys are labelled with the alphabet on the lower half and
numbers and symbols on the upper half. Press the key
corresponding to the character you want to enter. To switch
between using the upper case characters and lower case
characters, press
. You can move the cursor by moving the
Navigation key.
Tip: To delete a character, press the
key.
In addition, you can use the following function keys:
Press to delete characters.
Press to start a new line.
Press twice to select CAP LOCK.
Press once more to remove CAP LOCK.
Press twice to select Function lock.
Press once more to remove Function lock.
18
a687 Crunch.book Page 19 Tuesday, February 23, 2010 6:20 PM
Short press inserts a space.
Double press inserts a period and a space.
Using Fn (numeric) Mode
1.
Press and hold in Idle mode to set phone to Silent
mode.
Press the
key once and press a number key.
Press the
key twice (
displays in the upper
right corner of the screen) and press as many number keys
as required.
Press to display the symbols grid.
Changing the Text Input Mode
The available Text Input modes are: Fn (123 numeric), Abc, and
Symbols (Sym). Refer to the Text Input mode in the upper right
corner of the screen to identify the mode.
• Abc: activates the default alphabet keys.
• Fn (123): activates the number keys.
• Sym: displays the symbols table.
Press the
2.
Press
once, twice, or three times to change the text
and Sending Messages” on page 78.
Using SYM (symbol) Mode
Symbol mode enables you to insert symbols and punctuation
marks into text.
1.
Enter the desired text. For more information on sending
Press the
key to display a matrix of symbols. Use the
arrow keys to display more tables.
2.
input mode to Abc, ABC, or abc.
2.
Continue until you are finished composing your message.
For more information on sending messages, see “Creating
To change the Text Input mode, follow these steps:
1.
key a third time to display Abc mode.
Select the number of the corresponding symbol and press
the OK soft key to insert the symbol into the text message.
3.
Continue until you are finished composing your message.
messages, see “Creating and Sending Messages” on
For more information on sending messages, see “Creating
page 78.
and Sending Messages” on page 78.
Entering Text
19
a687 Crunch.book Page 20 Tuesday, February 23, 2010 6:20 PM
Section 5: Call Functions
This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.
For more information, refer to “Call Settings” on page 43.
Displaying Your Phone Number
䊳
Press
to add a two-second pause, and use the keypad
to enter the additional numbers.
.
Note: When you activate the Auto Redial option in the Voice Call menu
(Menu ➔ Settings ➔ Calls ➔ Voice Call ➔ Auto Redial) the phone
automatically redials up to 10 times when the person does not answer
the call or is already on the phone.
Tip: You can create pauses longer than two seconds by entering multiple p
pauses.
3.
Press
.
For more information, refer to “Adding Pauses to Contact
Numbers” on page 55.
Making an International Call
1.
From the Idle screen, press
. The + character displays.
2.
Use the keypad to enter the country code, area code, and
phone number.
20
From the Idle screen, use the keypad to enter the phone
number.
From the Idle screen, with the phone open, use the keypad to
• If you make a mistake, press
deleted.
.
To manually call a number with pause(s) without storing it in your
Contacts list:
2.
enter the number you wish to call and press
Press
Manual Pause Dialing
1.
Press Menu ➔ Settings ➔ Phone ➔ Own Number.
Making a Call
䊳
3.
until the desired numbers are
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when
dialing.
1.
After entering a number using the keypad.
• If you make a mistake, press
to erase a single character.
a687 Crunch.book Page 21 Tuesday, February 23, 2010 6:20 PM
2.
• Press and hold
to erase the entire string of numbers.
Press
to return to the Idle screen.
Ending a Call
䊳
Press the
You can end a call by sliding down your phone if the Slide
Down setting is set to Stop Operation. For more
information, refer to “Slide Down Setting” on page 39.
Dialing a Recent Number
All incoming, outgoing and missed calls are recorded in the Calls
menu. If the number or caller is listed in your Address Book, the
associated name also displayed.
2.
From the Idle Screen, briefly press
You can assign a shortcut number to a phone number for speed
dialing.
1.
key.
– or –
1.
Making a Call Using Speed Dial
.
Press the Down Navigation key to highlight a recent call in
the All Calls list.
– or –
Press Menu ➔ Address Book ➔ Speed Dial List.
Note: The Speed Dial screen displays showing the numbers 1 through 9. The
number 1 is reserved for Voice Mail.
2.
Highlight an unused number and press Options ➔ Assign.
3.
Select Address Book or FDN Contacts.
4.
Highlight a contact to assign to the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called the Address Book.
For further details about the Address Book feature, see “Finding
an Address Book Entry” on page 55.
Press the Left or Right Navigation key to display All Calls,
Missed Calls, Calls Made, or Calls Received.
3.
Press
to dial the number.
Call Functions
21
a687 Crunch.book Page 22 Tuesday, February 23, 2010 6:20 PM
Answering a Call
When a call is received the phone rings and displays the caller’s
phone number, or name if stored in the Address Book.
1.
2.
From the Incoming call screen, press
or Accept.
Tip: Press one of the volume keys to immediately silence the tone of an
incoming call or alarm.
Putting a Call on Hold
• If the Any Key option is activated (Menu ➔ Settings ➔ Calls ➔
General ➔ Call Answer), you can press any key to answer a call
except
.
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
– or –
To put a call on hold:
Slide open the phone to accept the call.
1.
While on a call, press Options ➔ Hold.
Press
2.
Press Resume to continue the conversation.
to end the call.
To end a call on hold:
Note: You can answer a call while using the Address Book or other menu
feature. After ending the call, the phone returns to the previously active
function screen.
Options During a Call
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone to increase or decrease
the volume level.
In Idle mode, you can also adjust the ringer volume using these
same keys.
22
䊳
Press Options ➔ End Call to disconnect.
To make a new call while you have a call in progress:
1.
While on a call, press Options ➔ Hold.
2.
Dial the new phone number or look it up in the Address
Book.
3.
Press to dial the second number.
– or –
Press Options ➔ New Call to dial the second number.
a687 Crunch.book Page 23 Tuesday, February 23, 2010 6:20 PM
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
To switch between two calls:
䊳
Press Options ➔ Swap.
To end a specific call:
䊳
Press
to end the current call.
– or –
Press Options ➔ End and then select Active Call, Held Call,
or All Calls and press
.
In-Call Options
1.
During a call, press the Mute soft key to mute the
microphone.
Press the Options soft key to access the following:
• Video Share: initiates a video sharing session. Video can be Live or
Recorded.
• Hold: places the current call on hold.
• Address Book: allows you to access your Address Book
information.
• Save to Address Book: allows you to save the current number to
your Address Book. This option only appears if the number is not
currently in your address book.
• View Address Book Details: allows you to view the number’s
Address Book information. This option only appears if the number is
in your address book.
• New Call: places the current call on hold and then allows you to
enter and call another number.
• Send Message: allows you to create and send a new Text or
Multimedia Message.
• More:
– Calendar: Allows you to temporarily access your calendar while still
maintaining the active call.
– Notes: Allows you to access Notes.
– Whisper Mode On/Off: Increases the microphone sensitivity level so
you do not have to speak loudly to be heard by the other party. Used in
quiet environments such as theaters, and meetings.
– Key tone off/on: Silences/mutes the key tones when on the call.
– Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected. These DTMF tones are sent as a group.
The DTMF tones are the tones used in phones for tone dialling,
sounding when you press the number keys. This option is helpful for
entering a password or an account number when you call an automated
system, like a banking service.
• End Call: Allows you to end the active call.
Call Functions
23
a687 Crunch.book Page 24 Tuesday, February 23, 2010 6:20 PM
If you are engaged in a call, you can place the active call on hold
by selecting the New Call option and either dialing another
number or answering another incoming call. Once the second
call is activated, the following options are available:
• Swap: Places the active call on hold and then re-activates the call on
hold.
• Join: Joins two calls (both active and on hold) into a multi-party call.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone
feature.
1.
Dial the number and press
2.
Press
.
3.
Press the Volume keys (located on the right side of your
to activate the speakerphone.
phone) to adjust the volume.
Important!: For more information, see “Responsible Listening” on page 129.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
Example: You wish to say something to person in the room, but do not want
the person on the phone to hear you.
24
Note: If you are already in Video Share or you have a call on hold, you need to
select Mute/Unmute.
To switch the microphone off temporarily during a call:
1.
Press Mute. The option is then replaced with Unmute.
2.
Press Unmute to deactivate the Mute function and
reactivate the microphone.
Searching for a Number in Address Book
1.
During the active call, press Options ➔ Address Book.
2.
Highlight an Address Book entry.
For further details about the Address Book feature, see “Finding
an Address Book Entry” on page 55.
Video Share
The Video Share features allows you to place a call and share live
or recorded video while on the call. You can initiate or receive
video by using the following steps.
Note: In order to share video, both parties must be subscribed to Video
Share, both must have phones that support Video Share, and both
must be in a 3G coverage area.
a687 Crunch.book Page 25 Tuesday, February 23, 2010 6:20 PM
Initiating and Receiving a Video Share Session
6.
1.
2.
My Stuff.
From the Idle screen, use the key pad to enter the number
to dial and press
.
Once the call is answered, if you're both capable of Video
Sharing, press Options ➔ Video Share to invite the other
party to see video shot from your phone. “Inviting ###-
Play a Video Share Recording
During a call (while not in a Live Video Share session) you can
share a recorded video for the recipient.
1.
Press Options ➔ Video Share ➔ Recorded and then select
from the available files in your Video folder.
###-####” displays. A message is sent to the recipient
“###-###-#### wants to Video Share with You.”
A pop-up message displays Video Share has stopped. Your
recorded video “VSxxxxxxxx” is saved in the Video folder in
To initiate and receive a Video Share session:
2.
To make the connection, the recipient should press Accept
and the Video begins to play on both phones.
Important!: When establishing a Video Share session, only the sender of the
video clip can save the file.
3.
The recipient receives a Video Share pop-up to either
Accept or Reject the Video Share call. They should press
4.
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Calls menu. You can access this menu
from the Idle screen by following these steps:
Accept to continue or Reject to reject the invitation.
1.
If the Auto Record option is On, REC displays on the upper
2.
right of the screen.
Note: The Auto Record option (page 49) must be enabled for this popup to
display.
5.
Recent Calls
To end the video share call, press Stop.
From the Idle Screen, briefly press
.
Press the Down Navigation key to highlight a recent call in
the All Calls list.
– or –
Press the Left or Right Navigation key to display All Calls,
Missed Calls, Calls Made, or Calls Received.
Call Functions
25
a687 Crunch.book Page 26 Tuesday, February 23, 2010 6:20 PM
3.
Press
Viewing Missed Calls
to dial the number.
If the number or caller is listed in your Address Book, the
associated name displays.
The number of calls missed displays on the Idle screen.
1.
Viewing All Calls
1.
From the Idle Screen, briefly press
From the Idle Screen, briefly press
and use the Right
navigation key to scroll to the Missed Calls folder. The most
recently missed calls display.
. Listed are all
calls made, missed, or received.
2.
Press the Options soft key to view the following options:
• Details: allows you to view the caller’s name, phone number, time
and date called as well as the length of the call.
• Call: allows you to automatically dial the selected number.
• Video Share Call: allows you to call the number and share a video.
• Save to Address Book: allows you to save the number to your
Address Book on either the phone or SIM card.
• Send Message: allows you to sent a text or Multimedia message to
the caller.
• Delete: allows you to delete the selected call.
• Add to Reject List: allows you to add the selected number to the
Reject List.
• View Contact Details: allows you to view the contact’s Address
Book information. This option only appears if the contact is in your
address book.
2.
highlights, the details display.
3.
To move to another call type, press the Left or Right
Navigation key to make your selection.
Saving a Missed Call to your Address Book
1.
From the Idle Screen, briefly press
and use the Right
navigation key to scroll to the Missed Calls folder.
2.
26
Scroll through the list of missed calls. As the call
Highlight the desired missed call.
a687 Crunch.book Page 27 Tuesday, February 23, 2010 6:20 PM
3.
Press Options ➔ Save to Address Book. For further details
about the Address Book feature, see “Adding a New
Call Time
1.
Contact” on page 53.
Time. The following times display:
Sending a Message to a Missed Call
1.
From the Idle Screen, briefly press
and use the Right
navigation key to scroll to the Missed Calls folder.
2.
Highlight the desired missed call.
3.
Press Options ➔ Send Message.
4.
From the New Messages screen, highlight the empty text
information, refer to “Creating and Sending Messages” on
Phone Password” on page 41.
Data Volume
Data Volume refers to the amount of data sent to and from the
phone.
Deleting a Missed Call
1.
and use the Right
navigation key to scroll to the Missed Calls folder.
2.
Highlight the desired missed call.
3.
Press Options ➔ Delete and press the Right navigation key
to choose Selected or All.
4.
Enter the user-defined password and press Confirm to
reset all counters. For more information, refer to “Change
page 78.
From the Idle Screen, briefly press
• Last Call Time: shows the length of time for the last call.
• Total Sent: shows the total length of time for calls sent.
• Total Received: shows the total length of time for calls received.
2. Press Reset to reset the counters.
3.
field and use the keypad to type a message. For more
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Recent Calls ➔ Call
At the Delete? prompt, press Yes to delete or No to cancel.
Press Menu ➔ My Stuff ➔ Tools ➔ Recent Calls ➔ Data
Volume. The following data items display:
• Last Sent Data: shows the size of the last data packet (measured
in KB - kilobytes) sent by the phone since the last time this counter
was reset.
• Last Received Data: shows the size of the last data packet
(measured in KB - kilobytes) received by the phone since the last
time this counter was reset.
Call Functions
27
a687 Crunch.book Page 28 Tuesday, February 23, 2010 6:20 PM
• Total Sent Data: shows the size of the total data packet (measured
in KB - kilobytes) which were sent by the phone since the last time
this counter was reset.
• Total Received Data: shows the size of the total data packet
(measured in KB - kilobytes) which were received by the phone
since the last time this counter was reset.
2. Press Reset to set the counters to zero.
3.
Enter the password and press Confirm to reset all
counters. For more information, refer to “Change Phone
Password” on page 41.
Call Waiting
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the Settings ➔ Calls ➔ Voice Call
➔ Call Waiting Menu to Activated. You are notified of an
incoming call by a call waiting tone.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
supported by the network, you can join all the calls together. A
call waiting tone notifies you of an incoming call.
Note: The Join option combines all of the calls you have established with
your phone (both active and on hold).
Swap places the current call on hold and then activates the previous
call.
This feature joins all of the calls you have established with your
phone (both active and on hold) into a multi-party call.
1.
Press
to answer the first incoming call.
2.
Press
or Accept to answer the next incoming call. The
first call is automatically put on hold.
3.
multi-party call.
To answer a call while you have a call in progress:
1.
Press
to answer the next incoming call. The first call
is automatically placed on hold.
2.
To switch between the two calls, press Options ➔ Swap.
• Swap: Places the current call on hold and then activates the
previous call.
28
Press Options ➔ Join to join the two callers and create a
4.
Press
to end the call.
a687 Crunch.book Page 29 Tuesday, February 23, 2010 6:20 PM
Section 6: Changing Your Settings
This section includes tips on how to use your phone’s features,
as well as how to change and customize the display settings, call
handling, security settings, and other settings associated with
your phone.
Quick Tips
Quick Tips connects you to the AT&T Quick Tips web page where
you can find information on the operation of your phone.
䊳
In Idle mode, select Menu ➔ Settings ➔ Quick Tips.
The AT&T Quick Tips web page displays.
Sound Profile
This menu allows you to specify how you are informed of
incoming calls and messages as well as other notification sounds
your phone can make.
Selecting a Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Press the radio button next to the profile name. The
selected profile activates. Choices include:
• Normal
• Silent
• Driving
• Outdoor
Normal Profile
The phone’s profile defaults to Normal where the incoming Alert
Type is set to melody.
Editing the Normal - Call Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile
2.
Highlight Normal and press Edit.
3.
Highlight the Call tab.
4.
Select the Call Alert Type field and press Change.
5.
Select one of the following:
• Melody: the phone rings using the ring melody selected in the
Message Alert Tone menu.
• Vibration: the phone vibrates.
• Vibration then Melody: the phone vibrates then plays a melody.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
6. Press the Voice Call Ringtone field and press Change.
Changing Your Settings
29
a687 Crunch.book Page 30 Tuesday, February 23, 2010 6:20 PM
7.
Select Shop Tones to launch AppCenter and shop for a
tone.
6.
– or –
7.
Select one of the listed tones.
8.
Highlight the Ringtone Volume field and press Change.
9.
Use the Left or Right navigation key to adjust the volume
level (range is 1-7).
10. Press Save to return to the Sound Profile menu and save
your selections.
Editing the Normal - Message Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile
2.
Highlight Normal and press Edit.
3.
Highlight the Message tab.
4.
Select the Message Alert Type field and press Change.
5.
Select one of the following:
• Melody: the phone rings using the ring melody selected in the
Message Alert Tone menu.
• Vibration: the phone vibrates.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
30
• Mute: the phone is silent and does not play a melody or vibrate.
Select the Message Alert Tone field and press Change.
Select one of the message tones or select Other Tones and
press Select.
8.
Highlight the Message Alert Repetition field and press
Change.
9.
Select one of the following and press Select.
• Once: repeats the message alert once.
• Periodic: repeats the message alert periodically.
10. Highlight the Message Tone Volume field and press Change.
11. Use the Left or Right navigation key to adjust the volume
level (range is 1-7) and press Select.
12. Press Save to return to the Sound Profile menu.
Editing the Normal - Phone Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile
2.
Highlight Normal and press Edit.
3.
Highlight the Phone tab.
4.
Highlight the Keypad Tone field and select one of the
following tones:
a687 Crunch.book Page 31 Tuesday, February 23, 2010 6:20 PM
• Beep
• Click
• Mute
5. Press the Power On Type field and press Change.
6.
Select one of the following and press OK:
• Melody: the phone rings using the ring melody selected in the
Message Alert Tone menu.
• Vibration: the phone vibrates.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
7. Highlight the Power Off Type field and press Change.
8.
Select one of the following and press OK:
• Melody: the phone rings using a pre-set ring melody.
• Vibration: the phone vibrates but does not ring.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
9. Highlight the Phone Sound Volume field and press Change.
10. Use the Left or Right navigation key to adjust the volume
level (range is 0-7) and press Select.
11. Press Save to return to the Sound Profile menu.
Silent Profile
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example.
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Silent and press Select.
Editing the Silent - Call Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Silent and press Edit.
3.
Highlight the Call tab, then select the Call Alert Type field
and press Change.
4.
Select one of the following alert types and press Select.
• Vibration: the phone vibrates but does not ring.
• Mute: the phone is silent and does not play a melody or vibrate.
Editing the Silent - Message Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Silent and press Edit.
3.
Highlight the Message tab, select the Message Alert Type
field and select one of the following:
Changing Your Settings
31
a687 Crunch.book Page 32 Tuesday, February 23, 2010 6:20 PM
• Vibration: the phone vibrates.
• Mute: the phone is silent and does not play a melody or vibrate.
4. Press Select to confirm your selection.
5.
Highlight the Message Alert Repetition field and press
Change.
6.
Select one of the following options then press Select:
• Once: repeats the message alert once.
• Periodic: repeats the message alert periodically.
7. Press Save to return to the Sound Profile menu.
• Melody: the phone rings using the ring melody selected in the Ring
tone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then Melody: the phone vibrates and then starts ringing.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
6. Press the Voice Call Ringtone field and press Change.
7.
tone.
– or –
Driving Profile
In this case, the speaker is active and launches the currently
selected Call alert type when the associated notification is
activated.
Select one of the listed tones.
8.
9.
Editing the Driving - Call Profile
Highlight the Ringtone Volume field and press Change.
Use the Left or Right navigation key to adjust the volume
level (range is 1-7).
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Driving and press Edit.
3.
Highlight the Call tab.
4.
Select the Call Alert Type field and press Change.
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
Select one of the following and press Select:
2.
Highlight Driving and press Edit.
3.
Highlight the Message tab.
5.
32
Select Shop Tones to launch AppCenter and shop for a
10. Press Save to return to the Sound Profile menu and save
your selections.
Editing the Driving - Message Profile
a687 Crunch.book Page 33 Tuesday, February 23, 2010 6:20 PM
4.
Select the Message Alert Type field and press Change.
5.
Highlight one of the following and press Select:
• Melody: the phone rings using the ring melody selected in the
Message Alert Tone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
6. Press the Message Alert Tone field and press Change.
Editing the Driving - Phone Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Driving and press Edit.
3.
Highlight the Phone tab.
4.
Select the Keypad Tone field and press Change.
5.
Highlight one of the following and press Select:
tones and press Select.
• Beep
• Click
• Mute
6. Highlight the Power On Type field and press Change.
8.
Select the Message Alert Repetition field and press Change.
7.
9.
Select one of the following options then press Select:
• Melody: the phone rings using a pre-set ring melody.
• Vibration: the phone vibrates but does not play a melody.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
8. Highlight the Power Off Type field and press Change.
7.
Highlight one of the message tones or highlight Other
• Once: repeats the message alert once.
• Periodic: repeats the message alert periodically.
10. Highlight the Message Tone Volume field and press Change.
11. Use the Left or Right navigation key to adjust the volume
level (range is 1-7).
12. Press Save to return to the Sound Profile menu and save
your selections.
9.
Select one of the following and press OK:
Select one of the following and press OK:
• Melody: the phone rings using a pre-set ring melody.
• Vibration: the phone vibrates but does not ring.
Changing Your Settings
33
a687 Crunch.book Page 34 Tuesday, February 23, 2010 6:20 PM
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
10. Highlight the Phone Sound Volume field and press Change.
11. Use the Left or Right navigation key to adjust the volume
level (range is 0-7).
• Vibration: the phone vibrates but does not ring.
• Vibration then Melody: the phone vibrates and then starts ringing.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
6. Highlight the Voice Call Ringtone field and press Change.
7.
Select.
12. Press Save to return to the Sound Profile menu and save
your selections.
Outdoor Profile
In this case, you are outdoors and might not be able to hear the
phone, or need an increased volume in order to hear the phone.
For example, you might be jogging and need the phone to vibrate
and ring loudly.
Editing the Outdoor - Call Profile
8.
9.
Select the Ringtone Volume field and press Change.
Use the Left or Right navigation key to adjust the volume
level (range is 1-7).
10. Press Save to return to the Sound Profile menu and save
your selections.
Editing the Outdoor - Message Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Outdoor and press Edit.
2.
Highlight Outdoor and press Edit.
3.
Highlight the Call tab.
3.
Highlight the Message tab.
4.
Select the Call Alert Type field and press Change.
4.
Select the Message Alert Type field and press Change.
Select one of the following and press Select:
5.
Highlight one of the following and press Select:
5.
• Melody: the phone rings using the ring melody selected in the Ring
tone menu.
34
Highlight Shop Tones or select one of the tones and press
• Melody: the phone rings using the ring melody selected in the
Message Alert Tone menu.
a687 Crunch.book Page 35 Tuesday, February 23, 2010 6:20 PM
• Vibration: the phone vibrates but does not ring.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
6. Select the Message Alert Tone field and press Change.
7.
Highlight one of the message tones or highlight Other Tones
4.
Select the Keypad Tone field and press Change.
5.
Highlight one of the following and press Select:
• Beep
• Click
• Mute
6. Highlight the Power On Type field and press Change.
and press Select.
7.
8.
Select the Message Alert Repetition field and press Change.
9.
Select one of the following and press Select:
• Once: repeats the message alert once.
• Periodic: repeats the message alert periodically.
10. Select the Message Tone Volume field and press Change.
11. Use the Left or Right navigation key to adjust the volume
level (range is 1-7).
12. Press Save to return to the Sound Profile menu and save
your selections.
Editing the Outdoor - Phone Profile
1.
In Idle mode, select Menu ➔ Settings ➔ Sound Profile.
2.
Highlight Outdoor and press Edit.
3.
Highlight the Phone tab.
Select one of the following and press Select:
• Melody: the phone rings using a pre-set ring melody.
• Vibration: the phone vibrates but does not play a melody.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
8. Press the Power Off Type field, select one of the following
and press OK:
• Melody: the phone rings using a pre-set ring melody.
• Vibration: the phone vibrates but does not ring.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
9. Highlight the Phone Sound Volume field and press Change.
Changing Your Settings
35
a687 Crunch.book Page 36 Tuesday, February 23, 2010 6:20 PM
10. Use the Left or Right navigation key to adjust the volume
level (range is 0-7).
11. Press Save to return to the Sound Profile menu and save
your selections.
Display
In this menu, you can change various settings for the display or
lighting.
1.
In Idle mode, press Menu ➔ Settings ➔ Display and
press the Select soft key or the
key.
The following options are available:
• Wallpaper: allows you to select Picture or None. None leaves the
wallpaper blank. Press the Edit soft key, and scroll through the
graphics in your Graphics folder (on the Phone or on an External
Storage Card) to select your wallpaper. Press the Select soft key or
the
key to confirm the selection.
• My Theme: allows you to select from three different themes. Make
a selection and press the Select soft key or the
key.
• Menu Style: allows you to select whether the phone’s menus are
presented in either a Grid Menu style or List Menu style. Make a
selection and press the Save soft key or the
key.
• Light Settings: allows you to adjust the Brightness and set the
Backlight Time.
36
Note: Light settings can affect the length of time before battery recharge is
necessary.
– Brightness: allows you to adjust the display brightness for the LCD to
see it better in different lighting conditions. Press the Left or Right
Navigation keys to adjust the brightness. Press the Save soft key or the
key to confirm your selection.
– Backlight Time: allows you to select the amount of time for the
backlight to remain on and the length of time for the actual dimming to
occur. Highlight the On field and press the
key. Then select from
10 Seconds, 30 Seconds, 1 Minute, 3 Minutes, or 10 Minutes.
Highlight Dim and press the
key. Choose from Off, 5 Seconds, 10
Seconds, 30 Seconds, 1 Minute, 3 Minutes, or 10 Minutes and
press the
key. Press the Save soft key to save your changes.
• Dialing Display: allows you to select the properties of those items
which are part of the display such as:
– Font Type: allows you to select the font to display. Press the Left or Right
Navigation keys to make your selection. Choose from Normal 1 or Normal
2. Press the Save soft key or the
key to confirm your selection.
– Font Size: allows you to select a size for the selected font. Press the Left
or Right Navigation keys to make your selection. Choose from Large,
Medium, or Small. Press the Save soft key or the
key to confirm
your selection.
– Font Color: allows you to select a color for the selected font. Press the
Left or Right Navigation keys to make your selection. Choose from
Monochrome, Gradation, or Basic. Press the Down Navigation key and
a687 Crunch.book Page 37 Tuesday, February 23, 2010 6:20 PM
select a color choice. Press the Save soft key or the
key to confirm
your selection.
– Background Color: allows you to select a color for the background
screen. Press the Left or Right Navigation keys to make your selection.
Press the Save soft key or the
key to confirm your selection.
• Greeting Message: allows you to enter the text to display on the
4.
Daylight Saving time applies.
Note: The Time Zone field does not display when Time Zone Updating is set to
Automatic.
screen when the phone powers on.
5.
Time & Date
6.
7.
Time Zone Updating and press the Left or Right Navigation
3.
Select the Time Format field and press the Left or Right
Navigation key to select the 12 Hours or 24 Hours format.
key to select from one of the following:
Important!: Current time zones are based upon Greenwich Mean Time.
Highlight the Date field and enter the date in the following
format: MM/DD/YYYY.
In Idle mode, select Menu ➔ Settings ➔ Time & Date ➔
• Manual Only: you need to manually set the time and date
according to the current time zone using the Set time menu.
• Prompt First: you are prompted before a time change is applied.
• Automatic: the phone automatically updates the time and date
according to the current time zone using the network service.
2. Highlight the Time Zone field and press Change.
Select the Time field and enter the time in the following
format: HH/MM.
This menu allows you to change the current time and date
displayed.
1.
Highlight the Daylight Saving checkbox and press Check if
8.
Highlight the Date Format field and press the Left or Right
9.
Press Save to save your settings.
Navigation key to select a format.
Phone Settings
You can customize various phone settings.
䊳
In Idle mode, select Menu ➔ Settings ➔ Phone.
Use the Left or Right Navigation key to locate a time-zone.
A corresponding area of the world map displays.
Changing Your Settings
37
a687 Crunch.book Page 38 Tuesday, February 23, 2010 6:20 PM
Language
Shortcuts
This menu allows you to select a display language for Text
language and Text Input mode. Choose from Automatic, English,
Français, and Español.
1.
key.
2.
Highlight the Screen Text field and press Change.
3.
Highlight one of the following selections and press OK:
• Automatic (uses the language set on your SIM card).
• English
• Français
• Español
4. Highlight the Input Language field and press Change.
Highlight one of the following selections and press OK:
• English
• Français
• Español
6. Press Save to save your settings and return to Phone
settings page.
38
1.
In Idle mode, select Menu ➔ Settings ➔ Phone ➔
Language and press the
5.
The Shortcuts option allows you to change the applications
assigned to your Navigation keys.
In Idle mode, select Menu ➔ Settings ➔ Phone ➔
Shortcuts.
2.
Use the Navigation keys to select the Up, Down, Right, or
Left key.
3.
Press the Options ➔ Change and press the Select soft key
or the
key. Select a new application to assign to the
previously selected key.
4.
Press the Save soft key or the
key to assign the new
application.
Own Number
The Own Number option displays the number assigned to the SIM
card in your phone. You can change the number, but entering
another number may prevent you from making or receiving calls
on the handset. You may also add other names and numbers into
your phone for easy referral.
a687 Crunch.book Page 39 Tuesday, February 23, 2010 6:20 PM
Slide Down Setting
Lock Phone
This setting allows you to choose what displays on the main
screen when you slide down your phone.
1.
In Idle mode, select Menu ➔ Settings ➔ Phone ➔ Slide
2.
Select one of the following options:
Down Setting and press the
key.
• Stop Operation: when you slide the phone down, you are returned
to the Idle screen. This will end a call or end any applications you
are running.
Note: After closing the slide, there may be a prompt prior to ending an
application.
• Continue Operation: when you slide the phone down, you will
remain at the screen you were at.
3. Press Save or press the
key.
Security
The Security feature enables you to restrict the use of your phone
by the others and to restrict the types of calls. Various codes and
passwords are used to protect the features of your phone.
The following options are available:
When the Lock Phone feature is enabled, the phone is locked and
you must enter the 4- to 8-digit phone password each time the
phone is powered on.
Note: You are prompted to create a password the first time this feature is
enabled.
To change the phone password, see “Change Phone Password”
on page 41. Once you enter the correct password, you can use
the phone until you switch it off. The following options are
available:
– Off: you are not asked to enter the phone password when you switch on
the phone.
– On: you are required to enter the phone password when you switch on
the phone.
Lock SIM Card
When the Lock SIM Card feature is enabled, your phone only
works with the current SIM. You must enter the SIM password to
unlock the SIM so you can use a different SIM card. Once you
enter the SIM password, you are asked to confirm your
password. Reenter your password and press the Confirm soft
key.
Changing Your Settings
39
a687 Crunch.book Page 40 Tuesday, February 23, 2010 6:20 PM
Note: This SIM password is typically the last four digits of the current phone
number. You can obtain a SIM password from an AT&T customer
service representative.
Check PIN Code
• When the Check PIN Code feature is enabled, you must enter your PIN
each time you switch on the phone with the SIM Card. Consequently,
any person who does not have your PIN cannot use your SIM without
your approval.
The following options are available:
– Off: the phone connects directly to the network when you switch
it on.
– On: you must enter the PIN each time the phone is switched on.
Note: Before disabling the Check PIN Code feature, you must enter your PIN.
You can obtain your PIN from an AT&T customer service
representative.
Lock Applications
Using this option you can lock various applications. Once you
lock the contents, you must enter the phone’s password to
access the associated menus.
Note: The first time you access the password screen, you are prompted to
create a password.
40
The applications options are:
– All
– IM
– Messaging
– Recent Calls
– My Stuff
– Calendar
– Tasks
– Notes
– Address Book
Set FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM card,
allows you to restrict the outgoing calls to a limited set of phone
numbers. The following options are available:
– Off: you can call any number.
– On: you can only call phone numbers stored in the FDN contacts list.
You must enter your PIN2. You can obtain the PIN2 Code from your
service provider's customer care department.The following options for
entering FDN contacts are available through the Address Book:
• Entering Full length entries or wild cards into the FDN list.
• Entering a full length number with a specific contact name into the
FDN list.
• Using wildcard entries allow you to dial a range of numbers with a
single entry: ex. 555 – All dialed numbers that begin with 555 are
a687 Crunch.book Page 41 Tuesday, February 23, 2010 6:20 PM
allowed. Numbers that do not match the conditions in the FDN list
are restricted.
Note: Entering an asterisk (*) is not required for wild card entries.
Change Phone Password
The Change Phone Password option allows you to change your
current phone password to a new one. Once you enter a new
password, you are asked to confirm it by entering it again.
APN Control
Allows you to turn control of Access Point Names (APN) On or Off.
APNs are a method by which you can access advanced
communication using your handset. This advanced
communication can include instant messaging, multimedia
messaging, email, and internet access. Turning On APN Control
requires the PIN2 code. To access APN control:
1.
Security ➔ APN Control and press the Select soft key or
Change PIN Code
This option allows you to change your current PIN, provided that
the PIN Check feature is enabled. You must enter the current PIN
before you can specify a new one. Once you enter a new PIN, you
are asked to confirm it by entering it again.
Change PIN2 Code
The Change PIN2 option allows you to change your current PIN2
to a new one. You must enter the current PIN2 before you can
specify a new one. Once you enter a new PIN2, you are asked to
confirm it by entering it again.
Note: If your SIM card does not require a PIN2 password, this menu does not
display.
In Idle mode, press Menu ➔ Settings ➔ Phone ➔
the
2.
key.
Highlight On and press the Save soft key or the
key.
Reset Phone
You can easily reset your phone to its default settings. To reset
your phone:
1.
In Idle mode, select Menu ➔ Settings ➔ Phone ➔ Reset
Phone.
2.
At the All Settings reset to factory defaults. Continue?
prompt, press Yes to reset, or No to cancel.
3.
Enter your phone password, and press the Confirm soft
key.
Changing Your Settings
41
a687 Crunch.book Page 42 Tuesday, February 23, 2010 6:20 PM
4.
After the phone settings are reset, the Reset Phone done
confirmation displays.
Once your phone has been reset to its default settings for
those selected options, it will restart itself in order to
incorporate the new settings.
airplane or in any other area where making or receiving calls or
data transmission is prohibited. When your phone is in Airplane
Mode, it cannot send or receive any calls or access online
information. When active, the (
) icon displays in place of the
signal strength indicator.
1.
In Idle mode, select Menu ➔ Settings ➔ Phone ➔ Airplane
Mode.
Note: User Data such as contacts, messages, pictures, videos, and music is
not deleted.
Restore Phone
The Restore Phone option is the same as the Reset Phone option
described above in that all settings are reset to factory defaults.
However, with the Restore Phone option, all user data deletes.
Warning!: All User Data such as contacts, messages, pictures, videos, and
music is deleted. Ensure that you remove your microSD card if
applicable because it will erase during the Restore Phone option.
2.
Select On or Off and press Save or the
key.
T-Coil Mode
T-Coil mode allows you to use a hearing aid with a T-coil setting
in connection with the handset. You can set this mode to On or
Off. When T-Coil Mode is On, the
icon displays on the Idle
screen.
Set the T-Coil mode to On to activate it, or Off to deactivate it.
1.
In Idle mode, select Menu ➔ Settings ➔ Phone ➔ T-Coil
2.
Select Enable or Disable and press Save or the
3.
Press Yes when the T-Coil confirmation displays.
Mode.
Warning!: When performing the Restore Phone option, do not remove your
battery until the phone completes the task and restarts, otherwise
phone damage may occur.
Airplane Mode
Airplane Mode allows you to use many of your phone’s features,
such as Games, Voice notes, and more, when you are in an
42
key.
Important!: The hearing aid category specified for this product represents
compatibility only when the phone is open, which has maximum
antenna efficiency. When the option is enabled and the phone is
open during a call, the T-coil adjusts the audio for use with T-coil
a687 Crunch.book Page 43 Tuesday, February 23, 2010 6:20 PM
– Minute Minder: allows you to activate an alert tone which sounds
every minute the call is active.
hearing aids (see “FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices” on page 131.)
Call Settings
䊳
In Idle mode, select Menu ➔ Settings ➔ Calls.
Adjusting the General Call Settings
1.
Press General and select from the following options:
• Show My Number: allows you to select how your caller ID is
handled when an outgoing call is initiated. This is what others see
on their Caller ID screen. Leave the value blank if you do not wish
your number displayed to other users.
• Auto Reject: selects which numbers are automatically sent to
voicemail based on a user-created list from within the Reject List.
• Call Answer: selects how your phone answers incoming calls.
Selections are: Send Key, Open Slide, and Any Key.
• Auto Reply: allows you to send an auto reply text message to a
missed call number when this setting is activated. Set to On and
enter a reply that you want to send.
• Call Status Tones: allows you to activate an alert tone for one of
two available status categories. Press an option to make your
selection and then press Save to store your new selection. Options
include:
– Call Connect Tone: allows you to activate an alert tone which sounds
every time a call is connected.
• Alerts on Call: activates an alert tone for new messages being
received during an active call. Press Save to store setting.
2. Press
twice return to the previous Settings page.
Adjusting the Voice Call Settings
1.
Select Voice Call and choose from the following options:
• Call Forwarding: incoming calls are re-routed to a secondary
number that you specify. Select the condition for the call forward
action:
– Forward Always activates an automatic forward of all incoming calls
regardless of condition.
– Busy activates an forward function only when your number is currently
in use and the caller receives a busy signal.
– No Reply activates an automatic forward of all incoming calls after a
preset amount of time (5 seconds - 30 seconds).
– Unreachable activates an automatic forward of all incoming calls only
when you can not be reached and your phone status is set to
unreachable.
– Cancel All cancels all call forwarding functions.
• Call Waiting: this network service informs you when someone is
trying to reach you during another call. You can specify individual
call waiting options for voice calls and/or data calls.
– Press of the available options: Activate, Deactivate, Check Status
(checks the status of this service on your account).
Changing Your Settings
43
a687 Crunch.book Page 44 Tuesday, February 23, 2010 6:20 PM
• Auto Redial: the phone automatically redials the last active number
if the call was either cut off or you were unable to connect.
– Press either On or Off to activate/deactivate the function.
– Press Save to store the new setting.
2. Press
twice return to the previous Phone settings page.
Connectivity
use is prohibited, you can turn off the Bluetooth wireless
technology headset.
1.
➔ Bluetooth and press the Select soft key or the
key.
2.
You can edit several of the communication/connection
parameters on this phone.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Activation
To use the Bluetooth option you must first activate it. When the
Bluetooth is deactivated, you cannot send or receive information
via Bluetooth. To save battery life or in situations where Bluetooth
44
If the first item in the Bluetooth menu is Bluetooth:Off,
highlight the Bluetooth:Off option press the Select soft key
or the
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection. Unlike infrared, you
don't need to line up the devices to beam information with
Bluetooth. If the devices are within connectivity range of one
another, you can exchange information between them, even if
they are located in different rooms.
In Idle mode, press Menu ➔ Settings ➔ Connectivity
key.
The Bluetooth activated confirmation prompt displays on
your phone.
Note: If the first item in the Bluetooth menu is Bluetooth:On, then Bluetooth is
already activated.
Discoverable
The Discoverable option allows your phone to wirelessly transmit
its phone name and status to every device within its range. This
transmission can pose a security risk and incite unauthorized
connection to your phone. It is recommended that you remain
hidden unless necessary.
1.
In Idle mode, press Menu ➔ Settings ➔ Connectivity➔
Bluetooth and press the Select soft key or the
key.
a687 Crunch.book Page 45 Tuesday, February 23, 2010 6:20 PM
2.
If the second item in the Bluetooth menu is
3.
If connecting to a Bluetooth wireless device, consult your
and press the Select soft key or the
Bluetooth device user manual for your assigned PIN.
key.
The Visibility enabled confirmation prompt displays on your
If connecting to another handset, enter the same
phone.
user-defined PIN on both handsets.
4.
Note: If the second item in the Bluetooth menu is Discoverable:On, then
Bluetooth is already discoverable.
Highlight the Connection Options field and use the Left or
Right Navigation key to select Automatic (reconnects
automatically), or Always Ask (asks before reconnecting)
My Devices
and press the Pair soft key.
The My Devices option provides a list of Bluetooth wireless
technology devices discovered by your handset.
1.
Enter the passkey (if applicable).
Discoverable:Off, then highlight the Discoverable:Off option
In Idle mode, press Menu ➔ Settings ➔ Connectivity➔
Note: The first time you try to pair with a handset, you and the owner of the
other handset must enter the same Passkey. Once the handsets are
paired, you do not need to use the Passkey again.
Bluetooth ➔ My Devices and press the Select soft key or
the
2.
5.
key.
Highlight Search For New Device and press the Select
soft key or the
key.
– or –
Highlight a device and press the Select soft key or the
key.
If you are unable to pair with the device a popup displays
on the screen. Press the Yes soft key to retry.
My Bluetooth Info
The My Bluetooth Info feature allows your phone to identify itself
using the name, the Device Address and Hardware and Software
Version, entered into the fields when your phone’s Bluetooth
visibility is turned On. The information is altered by selecting the
pre-existing text and replacing it with a new string.
Changing Your Settings
45
a687 Crunch.book Page 46 Tuesday, February 23, 2010 6:20 PM
1.
In Idle mode, press Menu ➔ Settings ➔ Connectivity
➔ Bluetooth ➔ My Bluetooth Info and press the Select
soft key or the
2.
Press the
key.
key to erase the previous Device Name.
Note: The default input entry method is Abc, where the initial character is
Uppercase and each consecutive character in that same word is left as
lowercase text.
3.
Press the Save soft key when you are finished.
Configuring Your Phone’s USB Settings
This menu selects the method of communication for the USB
port.
Note: Disable the Bluetooth feature before initiating a USB connection with
the phone. Prior to connecting the USB cable to the phone, install the
latest version of the PC Studio application. This application installs the
necessary USB drivers onto your machine. For a free download of PC
Studio, go to www.samsung.com/us/support.
1.
Select USB Mode.
Search for New Device
This option allows you to search for new Bluetooth devices.
1.
In Idle mode, press Menu ➔ Settings ➔ Connectivity➔
Bluetooth ➔ Search for New Device and press the
Select soft key or the
key. The phone searches for
available devices.
2.
Highlight a device and press the Select soft key or the
key.
46
In Idle mode, select Menu ➔ Settings ➔ Connectivity ➔
3.
Enter the passkey.
4.
Select a connection option and press the Pair soft key.
2.
Select one of the following USB modes:
• Ask on Connection: causes the phone to present a “Select USB
Mode” pop-up when you connect to the PC. You can choose from
either: PC Studio, Media Player, or Mass Storage.
• Media Player: sets the Media Player to launch as the default
application when a USB connection is detected.
• PC Studio: sets PC Studio to launch as the default application when
a USB connection is detected.
• Mass Storage: allows you to utilize the onboard storage capacity of
the phone’s microSD card to store and upload files. This option
allows your computer to detect the phone’s microSD card as a
removable storage drive.
3. Press Save.
a687 Crunch.book Page 47 Tuesday, February 23, 2010 6:20 PM
Network Profile Configuration
– or –
Configuring your Network Profiles
Press Options ➔ New, and press the Select soft key or
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection is made via one of the available WAP
browsers: MEdia Net and AT&T MMS (MultiMedia Server). You
need these settings to use the web browser or send MMS
messages or e-mails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although you
can change the active connection, please ask your local retailer
or customer service representative to assist.
1.
In Idle mode, press Menu ➔ Settings ➔ Connectivity
➔ Network Profiles.
2.
Highlight one of the following options and press the View
soft key.
• MEdia Net
• AT&T MMS
• AT&T IMS
Note: MEdia Net, AT&T MMS, and AT&T IMS are pre-configured and cannot
be altered on this screen. Your phone is set up by default for
connecting to the network.
the
3.
key to create a new connection.
Select one of the following parameters to edit. They may or
may not appear depending on the Network Profile that was
selected:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to
the network.
• Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to use as
your homepage.
• Proxy Address: MEdia Net set as the proxy server address
and port. This option only appears when the Protocol is set to HTTP.
• Gateway Address: Enter the Gateway Address. This option only
appears when the Protocol is set to WAP.
Changing Your Settings
47
a687 Crunch.book Page 48 Tuesday, February 23, 2010 6:20 PM
• Secure Connection: Select On or Off depending on whether or not
you have a secure connection. This option only appears when the
Protocol is set to WAP.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
• Advanced Settings: allows you to configure some of the
IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class. Highlight this option and press the Edit soft key to
access the following options:
– Static IP: specify if you want to manually enter an IP address. Remove
the check mark if you want the server to automatically assign the IP
address.
– Local Phone IP: allows you to configure the local phone IP address.
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. Remove the check mark if you want the server to
automatically assign the address.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
– Traffic Class: select the traffic class, press the Edit soft key, select a
Traffic Class (Subscribed, Conversation, Streaming, Interactive, or
Background) and press the OK soft key.
1.
IMS Settings.
2.
Important!: If you reset the IMS Service to Off, you are unable to use the
Video Share Option.
• Profile allows you to set the server which is providing service.
Select a profile and make your alterations.
Important!: If you change from the default AT&T IMS, Video Sharing may be
unavailable.
Applications Settings
The Applications Settings feature allows you to configure the
functional parameters for most of the onboard applications.
These applications are described in more detail within other
sections of this manual.
1.
IMS is the method used to connect to the server in order set up
the Video Share option.
48
Select one of the following options:
• Service allows you to set the IMS service to On or Off.
Note: The WAP settings varies depending on the service provider.
IMS Settings
In Idle mode, select Menu ➔ Settings ➔ Connectivity ➔
In Idle mode, select Menu ➔ Settings ➔ Applications
Settings.
2.
Select the type of application which you want to change:
• Messaging Settings (see page 81)
• Browser Settings (see page 103)
a687 Crunch.book Page 49 Tuesday, February 23, 2010 6:20 PM
• Camera Settings (see page 71)
• Music Player Settings (see page 49)
• Mobile Video Settings (see page 76)
• Video Share Settings (see page 49)
• Record Audio Settings (see page 49)
• Calendar Settings (see page 50)
• Address Book Settings (see page 52).
Music Player Settings
To enable the Alerts, Auto Record, and Recording Location for
Video Share, use the following steps.
1.
In Idle mode, select Menu ➔ Settings ➔ Applications
Settings ➔ Music Player Settings.
2.
Select one of the following options:
• Play Mode: allows you to set the order and repetition of your songs.
– Shuffle: set to On to randomly change the order that your songs are
played. Set to Off to play in the order that they are listed.
– Loop: allows you to set how many times a song is played. Set to Off,
Repeat 1, or Repeat All.
• Play Via: allows you to set how you listen to your music. Select
Phone or Bluetooth Headset.
• Equalizer: allows you to set the Equalizer to Normal, Rock, Pop,
Dance, Classic, or Jazz.
3.
After making any changes, press the Save soft key.
Video Share Settings
To enable the Alerts, Auto Record, and Recording Location for
Video Share, use the following steps.
1.
In Idle mode, select Menu ➔ Settings ➔ Applications
Settings ➔ Video Share Settings.
2.
Select one of the following options:
• Audio Alert: allows you to turn On or Off the Video Share Alerts
which play a tone.
• Auto Record: allows you to turn On or Off the Auto Record which
records the Video Share call.
• Recording Location: allows you to set whether video recorded
stores on the Phone or on the microSD Memory Card.
3. Press Select.
Record Audio Settings
To configure the filename and maximum length for a recording.
1.
In Idle mode, select Menu ➔ Settings ➔ Applications
2.
Select either of the following fields and edit the
Settings ➔ Record Audio Settings.
information:
Changing Your Settings
49
a687 Crunch.book Page 50 Tuesday, February 23, 2010 6:20 PM
• Default Name: allows you to enter a prefix name of all recorded
audio files. Press Save to store the new name.
• Recording Time: allows you to choose the maximum limit allowed
for the recorded audio file (1 Minute, 5 Minutes, 10 Minutes,15
Minutes, 30 Minutes, 60 Minutes, or Limit for MMS). Press Save to
save the new Recording Time.
3. Press Save.
Memory Management
You can easily check the amount of memory being used for
storing data, such as messages, media, calendar data, or
contacts entries. You can also delete any selected information
from your phone:
1.
Management.
Calendar Settings
To configure the starting day and view used when opening the
Calendar application.
1.
In Idle mode, select Menu ➔ Settings ➔ Applications
2.
Press either of the following fields and edit the information:
Settings ➔ Calendar Settings.
• Starting Day: allows you choose which day marks the first day in
your calendar week (Sunday or Monday).
• Default View Mode: allows you to choose the default view for
appointments used by the Calendar application when launched
(Month, Week, or Day).
3. Press Save.
2.
Press any of the following options:
• Clear Memory
• Used Space
Clear Phone Memory
From this menu you can clear the memory for Files, Messages,
Address Book entries, Calendar entries, Tasks, or Memos. You
can all select All to clear everything listed.
Note: To completely remove any personal information stored on your device,
see “Warranty Information” on page 139.
1.
In Idle mode, select Menu ➔ Settings ➔ Memory
2.
Press Check to place a checkmark alongside those
Management ➔ Clear Memory.
Address Book Settings
For information on Address Book Settings, see see “Address
Book Settings” on page 52.
In Idle mode, select Menu ➔ Settings ➔ Memory
applications you wish to clear.
– or –
50
a687 Crunch.book Page 51 Tuesday, February 23, 2010 6:20 PM
Check All to clear all the memory settings.
3.
4.
Press OK.
Enter the user-defined password and press Confirm to
clear the memory settings. For more information, refer to
“Change Phone Password” on page 41.
– or –
Press Back to cancel.
Check the Used Space
1.
In Idle mode, select Menu ➔ Settings ➔ Memory
2.
Select one of the following storage categories to view the
Management ➔ Used Space.
contents of a category’s memory:
• Shared Memory
• Messaging
• My Stuff
• Calendar
• Tasks
• Notes
• Address Book
3. Press
to return to the Idle screen.
Software Update
The Software Update feature enables you to use your phone to
connect to the network and upload any new phone software
directly to your phone.
1.
In Idle mode, select Menu ➔ Settings ➔ Software Update.
2.
Select one of the following options:
• Resume Update: allows you to resume the software update if you
had to pause the download.
• Check for Update: checks the AT&T server to see if there are new
software updates available. If new software is found, you can
download it to your phone.
3. Follow the on screen instructions.
Phone Information
This option allows you to see the phone number on the SIM card
(within the phone), the manufacturer, and the model number.
This information may be necessary if talking to Customer Service
in the event of a problem.
1.
In Idle mode, select Menu ➔ Settings ➔ Phone
Information.
2.
Read and review the information displayed on the screen.
3.
Press
to return to Idle screen.
Changing Your Settings
51
a687 Crunch.book Page 52 Tuesday, February 23, 2010 6:20 PM
Section 7: Understanding Your Address Book
This section allows you to manage your contacts by storing their
name and number in your Address Book. You can sort Address
Book entries by name, entry, or group.
You can also synchronize your phone Address Book with AT&T
Address Book, the network backup service.
Now, managing and keeping your contacts safe and accessible
has never been easier!
Note: When storing an Address Book entry into your SIM card, note that only
the name, phone number, group, and slot location are initially offered
as fields (some SIM cards may allow an address as well). Although you
may add additional fields to a SIM entry; if you move that same SIM
card to another model phone, it is possible that only the basic
information will transfer.
AT&T Address Book Activation
Upon activation of AT&T Address Book, the network backup
service, contacts are automatically synchronized between your
phone and online address book. The changes you make are
automatically saved and if you ever upgrade, damage, or lose
your phone, you can easily restore your contacts onto your new
phone.
52
To activate the AT&T Address Book, follow these steps:
1.
Press Menu ➔ Address Book.
2.
When the AT&T Address Book Terms and Conditions
screen is displayed, press the Accept soft key.
3.
Press the OK soft key.
This activation process only begins when the device Address
Book is opened for the first time.
For more information on the AT&T Address Book, see “Adding a
New Contact” on page 53 and “Sync Settings” on page 56.
Address Book Settings
1.
Press Menu ➔ Address Book ➔ Address Book Settings.
2.
Press any of the following options to activate a function:
• My Business Card: creates and attaches a virtual business card as
an attachment to outgoing messages. For more information, see
“Attaching Business Card to a Message” on page 79.
• Save New Contacts to: defines the destination for new contact
entries (Phone Memory, SIM Memory, or Always Ask).
• View Contacts from: to filter the display of current Address Book
entries. Options include: All, Phone Memory, or SIM Memory.
a687 Crunch.book Page 53 Tuesday, February 23, 2010 6:20 PM
• Sync Settings: allows you to enable synchronization on any change
made to your contacts between your phone Address Book and the
AT&T Address Book.
• Own Number: to display your current phone number (page 57).
• FDN Contacts: assigns phone numbers as FDN entries (page 57).
• Used Space: displays the memory storage allocation (total available
and remaining) within your Phone, SIM card, Additional No. 1,
Additional No. 2, Email, and FDN Contacts. (page 61).
• About: displays the AT&T Address Book version and last date
updated.
Adding a New Contact
3.
Press the Mobile - Private field and use the QWERTY
keypad to enter the phone number for this contact.
4.
Highlight the Landline field and use the QWERTY keypad to
enter the landline number for this contact.
5.
Highlight the Email - Private field and use the QWERTY
keypad to enter a private email address for this contact.
6.
Highlight the Group field and press
name and press
. Select a group
.
.
7.
Highlight the Caller ID field and press
Use the following procedure to store a new contact to your
Address Book. New contacts are stored on your phone by default.
8.
Select an image to represent this contact and press
Add contacts into your Address Book one at a time or easily
import them all by logging into your online AT&T Address Book at
att.com/addressbook.
9.
Saving a Number from the Idle screen
1.
2.
Options ➔ Select.
Highlight the Ringtone field and press
.
10. Select a tone to represent this contact and press Select.
11. Highlight the Notes field and use the QWERTY keypad to
Press Menu ➔ Address Book ➔ Add New Contact. The Add
enter a note. For more information, refer to “Entering Text”
New Contact screen displays.
on page 18.
Highlight the First Name, Last Name, and Display Name
12. Press Options ➔ Save.
fields and use the QWERTY keypad to enter names for this
contact. For more information, refer to “Entering Text” on
Note: By default, Contacts are saved on the phone. To copy them to a SIM
card, see “Copying an Entry to the SIM Card” on page 60.
page 18.
Understanding Your Address Book
53
a687 Crunch.book Page 54 Tuesday, February 23, 2010 6:20 PM
3.
Note: Ringtones assigned to a contact will not be synchronized to AT&T
Address Book.
Field.
Adding More Fields to a Number
While in the process of creating a new entry or editing an existing
contact, you can add additional fields to the entry’s list of
information.
1.
Press Address Book ➔ Contacts, highlight a contact name
and press
.
Note: Only certain new fields may be deleted. If you have not added any new
fields to the contact, the Delete Field button does not display.
4.
Press Options ➔ Save.
Saving a Number During a Call
1.
During the call press Options ➔ Save to Address Book.
At the prompt, select New.
2.
Press Options ➔ Edit.
2.
3.
Press Options ➔ Add More Fields.
4.
From the Add Details field, use the Left or Right Navigation
• Select Update if this was a previously created entry and your are
adding the current number to the previous entry.
3. Select the type of phone number and press Select or
.
key to highlight the field to add and press Select or
.
4.
The selected field type displays on the Edit Contact screen.
5.
Enter the information into the new field and press
Options ➔ Save.
Deleting Fields From a Number
1.
Press Address Book ➔ Contacts, highlight a contact name
and press
2.
54
Highlight the field to delete and press Options ➔ Delete
.
Press Options ➔ Edit.
Enter the desired information, see “Saving a Number from
the Idle screen” on page 53.
Saving a Number After a Call Has Ended
1.
Press
2.
Highlight a phone number from the list and press Options
to bring up the Recent Calls screen.
➔ Save to Address Book.
3.
From the Select Type screen, press New.
a687 Crunch.book Page 55 Tuesday, February 23, 2010 6:20 PM
• Select Update if this was a previously created entry and your are
adding the current number to the previous entry.
4. Enter the desired information, see “Saving a Number from
Note: If more than a two-second pause is required, press
as needed to add additional two-second pauses.
5.
the Idle screen” on page 53.
as many times
Press Options ➔ Save to store your changes.
Using Contacts
Adding Pauses to Contact Numbers
When you call automated systems, you are often required to
enter a password or account number. Instead of manually
entering the numbers each time, you can store the numbers in
your Contacts along with special characters called pauses.
Dialing a Number from Address Book
Once you have stored phone numbers in the Address Book, you
can dial them easily and quickly by either using their SIM card
location number or by using the Search field to locate the entry.
To add a pause to a Contact:
1.
Press Address Book ➔ Contacts, highlight a contact name
2.
Press Options ➔ Edit.
3.
Highlight the number type where you want to add the
and press
.
pause.
4.
After the phone number, press
to add a two-second
pause. The letter p displays to indicate the pause.
Note: The default Address Book entries are: *Now - *669, Check Bill Balance
- *225#, Customer Care - 1-800-331-0500, Directory Assistance 411, Pay My Bill - *729, View Data Usage - *3282#, View My Minutes *646#, Voice Dial - *08, and Music ID - #43.
Finding an Address Book Entry
You can store phone numbers and their corresponding names
onto your SIM card and phone’s onboard memory. The two
locations are physically separate but are used as a single entity,
called the Address Book.
Tip: Press p multiple times to create longer pauses.
Understanding Your Address Book
55
a687 Crunch.book Page 56 Tuesday, February 23, 2010 6:20 PM
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store and how they are stored
may differ.
1.
In Idle mode, press Menu ➔ Address Book ➔ Contacts.
2.
Use the Up or Down Navigation key to locate a contact.
Tip: The Groups tab allows you to locate contacts by group. Use the Left or
Right Navigation key to move between Contacts and Groups.
3.
Press the
key or Options ➔ Call to call the contact.
Address Book Entry Options
To access the Address Book options, follow these steps:
1.
Press Menu ➔ Address Book ➔ Contacts and select an
entry from the list and press the
2.
key.
Press Options and select from the following:
• Edit: allows you to make changes to the contact information.
• Video Share Call: allows you to share either a live video recording
or recorded video with a phone that is similarly equipped, and if
both SIMs have the feature enabled.
• Call: allows you to call a currently selected entry.
• Send Message: allows you to send a text message or a multimedia
message to the selected entry.
56
• Delete: delete the current address book entry from a target location
such as the Phone and/or SIM card.
• Send Business Card via: allows you to send a business card to the
selected contact via Message or Bluetooth.
• Mark as Default Number: allows you to Change, Save, or Reset
the Default number and Message for a contact.
• More: allows you to Assign a Speed Dial number or save the
contact to your FDN Contacts list.
Sync Settings
This feature allows you to synchronize your phone Address Book
information with AT&T Address Book, the network backup
service.
If you were using AT&T Address Book on your previous phone
contacts, merge or replace contacts on this phone with your
AT&T Address Book contacts.
1.
In Idle mode, press Menu ➔ Address Book ➔ Address Book
Settings ➔ Sync Settings.
2.
Highlight one of the following options and press Save:
• Automatic Sync: automatically synchronizes any change of your
contacts (Add, Edit, or Delete).
• Sync Now: synchronizes any change of your contacts (Add, Edit, or
Delete).
• Sync Log: displays a log of your Sync activity.
a687 Crunch.book Page 57 Tuesday, February 23, 2010 6:20 PM
Finding My Own Phone Number
This function is a memory aid, which you can use to check your
own phone number if you need to do so.
䊳
In Idle mode, press Menu ➔ Address Book ➔ Address Book
Settings ➔ Own Number ➔ <voice line #>.
FDN Mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card,
restricts your outgoing calls to a limited set of phone numbers.
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card.
Note: FDN Mode must be set to On in the Menu ➔ Settings ➔ Phone ➔
Security ➔ Set FDN Mode option before you can add, change, or delete
contacts on the FDN List.
Changing the FDN mode Status
1.
In Idle mode, press Menu ➔ Settings ➔ Phone ➔ Security.
2.
Scroll down to the Set FDN Mode field and press the
Important!: With Fixed Dial Mode enabled, you are NOT able to dial any
number other than those created as FDN numbers.
Creating New FDN Numbers
With the Fixed Dial mode On, follow these procedures:
1.
– or –
Press Menu ➔ Address Book ➔ Address Book Settings ➔
FDN Contacts.
2.
Select On (to enable fixed dialing) or Off to disable the
4.
Enter the PIN2 code if you selected On.
option and press Save.
Press the
key in the FDN Contacts field and select
Create FDN Contact.
3.
Enter your PIN2 password and press the
key.
Note: The PIN2 code is provided by your Service Provider.
4.
Press Name and use the QWERTY keypad to enter a name
for this FDN contact.
key.
3.
In Idle mode, press Menu ➔ Address Book ➔ FDN Contacts.
5.
Press Phone Number and use the QWERTY keypad to enter
a contact phone number for this FDN contact.
Understanding Your Address Book
57
a687 Crunch.book Page 58 Tuesday, February 23, 2010 6:20 PM
6.
9.
keypad to enter a location value for the entry on the SIM
10. Press Back to return to the Address Book.
card.
11. Press
7.
Press Options ➔ Save to store the new FDN entry.
8.
Press
In Idle mode, press Menu ➔ Address Book ➔ Groups.
2.
Press Options ➔ Create Group.
3.
Enter a name for this group in the New Group field and
press Save. For more information, refer to “Entering Text”
1.
In Idle mode, press Menu ➔ Address Book ➔ Groups.
2.
Highlight a group entry and press the
3.
Press Options ➔ Add Member, then press the
4.
Highlight a member from the list or highlight All and press
key.
key.
Check. A checkmark beside the name indicates adding this
on page 18.
Press Options ➔ Group Settings and press the
person to the group.
key.
5.
Highlight the Picture field and press the
key.
6.
Select an image and press Options ➔ Select or the
key. The selected image displays in the Picture field and
displays the name of the image to the right.
58
to return to Idle mode.
Adding an Entry to a Group
Creating New Group
4.
key.
Note: Groups are not synchronized between your phone Address Book and
AT&T Address Book.
to return to Idle mode.
Group Settings
1.
Press Options ➔ Save and press Select or the
Highlight the SIM card location field and use the QWERTY
7.
Highlight the Ringtone field and press the
key.
8.
Select an audio file and press Options ➔ Select.
5.
Press Add.
Removing an Entry From a Group
1.
In Idle mode, press Menu ➔ Address Book ➔ Groups.
2.
Highlight a group entry and press the
3.
Highlight the member to delete from this group and press
Options ➔ Remove and press the
key.
key.
a687 Crunch.book Page 59 Tuesday, February 23, 2010 6:20 PM
4.
5.
Highlight a member from the list or highlight All and press
4.
and press Select or the
this person from the group.
The contact is automatically assigned to the speed dial
Using the Service Dialing Numbers
1.
In Idle mode, press Menu ➔ Address Book ➔ Groups.
2.
Highlight the group that you want to rename.
3.
Press Options ➔ Rename.
4.
Backspace over the original name and use the keypad to
enter a new name for this group, then press Save.
You can view the list of Service Dialing Numbers (SDN) assigned
by your service provider. These numbers may include emergency
numbers, customer service numbers, and directory inquiries.
1.
In Idle mode, press Menu ➔ Address Book ➔ Service
2.
Scroll through the numbers by using the Up or Down
Numbers and press the
Adding Speed Dial Entries
In Idle mode, press Menu ➔ Address Book ➔ Speed Dial
List and press the
2.
key.
Highlight a position (2-9) on the keypad in which to assign
the speed dial number and press Options ➔ Assign.
3.
key.
location.
Press the Remove soft key.
Renaming a Caller Group
1.
Highlight the contact to assign to the speed dial location
Check. A checkmark beside the name indicates removing
key.
Navigation key.
3.
Press
to dial the selected number.
Managing Address Book Entries
You can copy, delete, and view the memory status for the Phone
and SIM entries on your phone.
Select Address Book or FDN Contacts and press the
key.
Understanding Your Address Book
59
a687 Crunch.book Page 60 Tuesday, February 23, 2010 6:20 PM
Copying an Entry to the SIM Card
Copying an Entry to the Phone
1.
Note: When storing an Address Book entry into the SIM card, note that only
the name, phone number, group, and slot location are initially offered
as fields (some SIM cards may allow an address as well). To save
additional information for a particular contact, such as other phone
numbers, or e-mail, it is important to add new fields to that Contact
information. It is also important to note that if you move the SIM card to
another phone that does not support additional fields on the SIM card,
this additional information may not be available.
1.
In Idle mode, press Menu ➔ Address Book ➔ SIM
Management ➔ Copy Contacts from SIM and press the
key. The phone displays a list of your current contacts
stored on the SIM card.
Note: If the entry’s associated Group image has a SIM location icon on it,
then the entry exists on the SIM card. This is the type you can
duplicate.
Management ➔ Copy Contacts to SIM and press the
If the entry’s associated Group image does not have a SIM location
icon, then this entry currently exists on the phone.
key.
2.
3.
In Idle mode, press Menu ➔ Address Book ➔ SIM
Highlight a member from the list or highlight All and press
2.
Highlight a member from the list and press Check.
Check.
3.
Repeat Step 3 for each entry you want to copy to the
Phone or highlight All and press the
Press Copy.
key to place a
checkmark alongside all entries.
Important!: When copying from the Phone to the SIM card some information
may be lost.
4.
At the Continue? prompt, press Yes to copy the contact, or
No to cancel.
5.
60
Press
to return to Idle mode.
4.
Press Copy.
5.
Press
to return to Idle mode.
Deleting an Address Book Entry
You can delete a Phone or SIM entry from your phone’s memory.
a687 Crunch.book Page 61 Tuesday, February 23, 2010 6:20 PM
Checking the Address Book’s Used Space
Deleting an entry from the Phone
1.
In Idle mode, press Menu ➔ Address Book ➔ Contacts and
press the
key.
2.
Highlight a contact to delete and press the
3.
Press Options ➔ Delete.
4.
Press
key.
You can check how many names and numbers are stored in the
Address book, in both SIM card and the phone memory. You can
also see the capacity of both memories.
䊳
In Idle mode, press Menu ➔ Address Book ➔ Address Book
Settings ➔ Used Space.
to return to Idle mode.
• Phone: tells you how many Address Book entries (out of a possible
1000) are in use.
• SIM Card: tell you how many SIM Card entries are in use.
• Additional No. 1: if you have added additional numbers to contacts
saved on the SIM card, this is a counter of the number of SIM
contacts with a second number saved on your SIM card.
• Additional No. 2: if you have added additional numbers to contacts
saved on the SIM card, this is a counter of the number of SIM
contacts with a third number saved on your SIM card.
• Email: tells you how many entries are in use.
• FDN Contacts: tells you how many entries are in use on your FDN
SIM memory.
Note: Deleting a contact from your phone Address Book also deletes the
contact from AT&T Address Book.
Deleting all entries from the SIM
1.
In Idle mode, press Menu ➔ Address Book ➔ SIM
Management ➔ Delete Contacts from SIM and press the
key.
2.
Highlight a member from the list or highlight All and press
Check.
3.
Press Delete.
4.
Press
to return to Idle mode.
Note: Depending on the SIM card, the number of entries may differ.
5.
Press
to return to Idle mode.
Note: Entries on the FDN Address Book must be deleted from within the FDN
Address Book
Understanding Your Address Book
61
a687 Crunch.book Page 62 Tuesday, February 23, 2010 6:20 PM
Yellow Pages Mobile
The Yellowpages Mobile application provides quick and ready
access to businesses, map locations, and storage of your favorite
searches (My Place). This application allows you to tap into local
businesses, locations, and events, connecting you to your search
in real-time.
1.
Press Menu ➔ YPmobile.
2.
Follow the on-screen prompts to enter the desired
business name, location or search by category types.
62
a687 Crunch.book Page 63 Tuesday, February 23, 2010 6:20 PM
Section 8: My Stuff
The topics covered in this section include Applications, Audio,
Games, Picture, Online Locker, Tools, Video, Other Files, and
Used Space.
1.
Press Menu ➔ My Stuff.
2.
Select from one of the following functions: Applications,
• Copy: allows you to copy a file or folder to your phone or memory
card.
• Create Folder: allows you to create a new My Stuff folder.
• Memory Card Settings: allows you to view Memory Card Details,
format your memory card, rename your memory card, or turn
Bluetooth visibility on. This option only displays when there is a
memory card inserted in your phone.
• More: provides you with the ability to Sort by, or view Properties.
– Sort by: allows you to sort by Name, Date, Size, or Type.
– Properties: displays the properties for the selected item.
Audio, Games, Picture, Online Locker, Tools, Video, Other
Files, or Used Space.
3.
Highlight the On phone tab or On card tab to filter the
entries based on their current location (Phone, or Memory
Card).
My Stuff Functions
This page provides you with several functions that you can
activate from virtually any page within the My Stuff directories.
Most editing features are only applicable to those files/folders
that are not locked.
1.
Press Menu ➔ My Stuff ➔ On card ➔ Options.
2.
Select from the following:
• Open: opens the selected application or folder.
Creating a New Folder
1.
Press Menu ➔ My Stuff ➔ On card ➔ Options ➔ Create
2.
Use the keypad to create a new name for the folder and
Folder.
press OK.
Memory Card Settings
Using the Memory Card settings menu you can view memory
card details, format or rename the memory card, or turn
Bluetooth visibility on.
1.
Press Menu ➔ My Stuff ➔ On card ➔Options ➔ Memory
My Stuff
63
a687 Crunch.book Page 64 Tuesday, February 23, 2010 6:20 PM
Tones
Card Settings.
2.
Select one of the following and press the
key:
• Memory Card Details: displays details about the memory card
such as Name, Maximum memory, and Available memory. Press
Back after viewing.
• Format: formats the memory card.
• Rename Memory Card: allows you to rename the memory card.
Backspace and enter a new name for the memory card then press
Save.
• Bluetooth Visibility On: allows you to enable Bluetooth visibility for
this memory card. Press the
key to activate Bluetooth visibility.
Press the
key again to turn it off.
You can shop, download, and save to your Downloaded
Ringtones folder.
1.
to provide the option of either shopping for tones or
selecting from files previously stored to your phone.
2.
For more information, refer to “Applications” on page 84.
Audio
The Audio menu option allows you to shop tones, ringback tones,
and music using AppCenter. You can also access previously
stored (pre-recorded) audio files from your internal microSD card.
1.
Press Menu ➔ My Stuff ➔ Audio.
2.
Highlight an option (Tones, Ringback Tones, Music, or
Recorded Audio).
64
Select Shop Tones, select a file to download, and follow
the on-screen instructions. (These files are downloaded
and stored in the Tones folder.)
– or –
Applications
The Applications menu option allows you to access applications
and shop for applications using AppCenter.
Press Menu ➔ My Stuff ➔ Audio ➔ Tones. A menu displays
Select an available entry.
3.
From the playback page, press Options ➔ Set as and select
from the following options:
• Call Ringtone: allows you to assign the selected ringtone for use
with general incoming calls when no other caller ringtone has been
assigned.
• Caller Ringtone: allows you to assign a ringtone to someone in
your Contacts list. Select Search Contact to find an existing contact
or New to create a new one.
• Alarm Tone: allows you to assign the tone to an alarm.
a687 Crunch.book Page 65 Tuesday, February 23, 2010 6:20 PM
Ringback Tones
You can shop and download Ringback Tones, manage your
Ringback Tones, and access Help files. To access the Ringback
Tones menu option, use the following steps:
Recorded Audio
This menu shows a list of saved voice memos. When a voice
memo is recorded and saved, it is stored in the Recorded Audio
folder. To access this menu use the following steps:
1.
Press Menu ➔ My Stuff ➔ Audio ➔ Ringback Tones.
1.
Press Menu ➔ My Stuff ➔ Audio ➔ Recorded Audio.
2.
Select one of the following options and follow the
2.
Select a pre-recorded audio to begin playback.
3.
Press Back to exit.
on-screen instructions.
• Shop Ringback Tones: launches the browser from which you can
select Shop Ringback Tones, then follow the on-screen instructions
to purchase a file.
• Manage Ringback Tones: launches the browser from which you
can assign Ringback Tones to Callers and Groups, turn your
greeting on or off, and shop for more Ringback Tones.
• About Ringback Tones: launches the browser from which you can
navigate through the frequently asked questions regarding
Ringback Tones.
Music
This menu displays all of your purchased songs. From this menu,
you can also shop for music using the browser.
1.
Press Menu ➔ My Stuff ➔ Audio ➔ Music ➔ Shop Music to
2.
Follow the on-screen instructions.
Creating a new audio recording
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Record Audio.
2.
To start recording, press Rec.
For more information, refer to “Record Audio” on page 110.
Games
The Games menu option allows you to shop games using
AppCenter. You can download new games, then save them to the
Games folder.
For more information, refer to “Games” on page 84.
launch the browser.
My Stuff
65
a687 Crunch.book Page 66 Tuesday, February 23, 2010 6:20 PM
Picture
The Picture menu option allows you to shop for and download
new graphics (using AppCenter), then save them to your Picture
folder. To access the Picture menu option, use the following
steps:
1.
Press Menu ➔ My Stuff ➔ Picture ➔ Shop Wallpapers.
AppCenter launches.
1.
Press Menu ➔ My Stuff ➔ Picture.
2.
Depending on the type of picture or file the following
wallpaper. The file downloads and stores in the Picture
options may display:
folder.
• View: allows you to view the selected picture.
• Send: allows you to send a picture via Multimedia message, via
Mobile Share, or via Bluetooth.
• Set as: allows you to set the selected picture as Wallpaper or as a
Caller ID.
• Delete: allows you to Delete a selected picture or multiple pictures.
Note: You cannot delete pre-loaded images.
•
•
•
•
•
66
• More: provides you with the ability to Lock or Unlock an image, set
Bluetooth Visibility, Sort by, or view the file Properties.
Shop Wallpapers
Rename: allows you rename a picture.
Move: allows you to Move a selected picture or multiple pictures.
Copy: allows you to Copy a selected picture or multiple pictures.
Take Photo: launches the camera to allow you to take a photo.
Create Folder: create a new My Stuff folder on either the Phone or
Memory Card.
2.
Follow the on-screen instructions to purchase the new
Image Features
Highlight an image from the Picture page and press the
key
to display the image. Depending on the image type the following
options may be displayed after pressing Options:
• Zoom: allows you to magnify the current image.
• Send: allows you to send a picture via Multimedia message, via Mobile
Share, or via Bluetooth.
• Set as: allows you to assign the current image as either your current
Wallpaper, or as a Caller ID image used by a specific entry in the
Address Book.
• Delete: allows you to delete the image.
• Rename: allows you to rename the image.
• Edit: allows you to edit the image.
• More: allows you to choose from the following image options:
a687 Crunch.book Page 67 Tuesday, February 23, 2010 6:20 PM
• Slide Show: allows you play a slideshow using the graphics
currently available from within the Picture folder.
• Lock/Unlock: allows you to lock/unlock the image file. Lock
prevents the image file from deletion. Unlock allows deletion.
• Bluetooth Visibility: allows you to make the image file visible to a
Bluetooth device.
• Properties: allows you to view the properties of an image.
Note: Editing is only available for unlocked images or non DRM images.
Editing Images
1.
Press Menu ➔ My Stuff ➔ Picture ➔ <image> and the
key.
2.
Press Options ➔ Edit.
3.
Press Options and select one of the following:
• Save as: allows you to save the picture on your phone or memory
card.
• Effects: allows you to choose from among several effects such as:
Filter, Style, Warp, or Partial Blur.
• Adjust: allows you to adjust Brightness, Contrast, and Color.
• Transform: allows you to Resize, Rotate, or Flip the image.
• Crop: allows you to crop the image. Use the Navigation keys to
place the red box around the image until you center a portion in the
box, then press Options ➔ Crop.
• Insert: allows you to add Frames, Cliparts, Emoticon, or Text to
the image.
• Set as: allows you to assign the current image as either your
current Wallpaper, or as a Caller ID image used by a specific entry
in the Address Book.
• Send: allows you to send this picture via Multimedia Message or via
Bluetooth.
4. Press
to return to Idle mode.
Online Locker
Online Locker lets you easily access photos and videos you have
stored off your phone using AT&T Mobile Share. Browse and
share your online pictures and videos with favorite websites or
friends right from your phone.
Important!: Standard Data rates apply when using Online Locker.
1.
Press Menu ➔ My Stuff ➔ Online Locker.
2.
Press Accept to accept the Terms & Conditions.
3.
Your Online Locker Album List is displayed. Press View to
4.
Select a photo or media item and press the Options key.
open an album.
The following options are available:
My Stuff
67
a687 Crunch.book Page 68 Tuesday, February 23, 2010 6:20 PM
• View: allows you to view media in your Online Locker.
• Send Photo/Video: allows you to send a photo or video to a person,
your favorite websites like Facebook and MySpace, your computer,
and to your phone.
• Sort by: allows you to sort media by Date or File Type.
• Multi Select: allows you to select more than one media item to
send or delete.
• Search Album: allows you to search media in your Online Locker.
• Delete Photo/Video: allows you to delete a photo or video from
your Online Locker.
• Mobile Share Status: allows you to see recent Mobile Share
transfers.
• Help: allows you to receive help about using your Online Locker.
Tools
The Tools folder provides access to and allows you to use
Camera, Voice Recognition, Record Audio files, set Alarms, use
the Calendar features, view Recent Calls, create Tasks, write
Notes, use the Calculator, use the Tip Calculator, use the
Converter (for currency, length, weight, volume, area, and
temperature), view the World Clock, set the Timer, and use the
Stopwatch.
For more information, refer to “Tools” on page 109.
68
Video
This menu allows you shop for videos and to set up folders to
save your videos using AppCenter.
1.
Press Menu ➔ My Stuff ➔ Video ➔ Shop Videos. AppCenter
launches.
2.
Follow the on-screen instructions to purchase a new video.
The file downloads and stores in the Video folder.
Other Files
This feature provide additional storage of other miscellaneous file
types that may not fit into any of the previous categories.
䊳
Access the Other Files menu by selecting My Stuff ➔ Other
Files.
Used Space
The Used Space menu option allows you to view the usage and
available memory for Applications, Audio, Games, Picture, Video,
and Other Files. To access the Used Space option, use the
following steps:
1.
Press Menu ➔ My Stuff ➔ Used Space.
The memory usage for the different items displays.
a687 Crunch.book Page 69 Tuesday, February 23, 2010 6:20 PM
2.
Highlight Applications, Audio, Games, Picture, Video, or
Other Files.
3.
Highlight the item you want to delete (to free up memory)
and press Select or press the
key. Highlight an item in
the list and press Check to place a checkmark next to the
item.
4.
Press All Files to delete all items.
5.
Press Delete.
6.
At the Delete? prompt, press Yes to delete the item or No to
exit.
My Stuff
69
a687 Crunch.book Page 70 Tuesday, February 23, 2010 6:20 PM
Section 9: Camera
This section explains how to use the camera on your phone. You
can take photographs and shoot video by using the built-in
camera functionality. Your 2.0 megapixel camera produces
photos in JPEG format.
Important!: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with
another person’s privacy.
Using the Camera
Taking Photos
3.
picture automatically stores within your designated
storage location. If no microSD is installed, all pictures are
stored on the Phone.) For more information, refer to
“Camera Options” on page 71.
Note: The number of JPEG pictures remaining on the selected media displays
in the lower-left portion of the screen. This is an approximate number
of total pictures you can take at the current image size.
4.
Taking pictures with your device’s built-in camera is as simple as
choosing a subject, pointing the camera, then pressing the
camera key.
In Idle mode, press the Camera key
to activate the
the picture up to x8.
Note: The Zoom feature is not available when the picture size is set to the
maximum size (1600x1200).
6.
Using the phone’s main display screen as a viewfinder,
adjust the image by aiming the camera at the subject.
70
Use the Up and Down Volume keys to zoom in or out when
viewing a picture after you have taken it. You can magnify
camera mode.
2.
Press Menu before taking the photo to access various
camera options.
5.
Note: When taking a photo in direct sunlight or in bright conditions, shadows
may display on the photo.
1.
Press the Camera key until the shutter sounds. (The
Press
to return to Idle mode.
a687 Crunch.book Page 71 Tuesday, February 23, 2010 6:20 PM
Camera Options
Options are represented by icons across the top of the screen
when you press the Menu key.
• Camera/Camcorder/Video Share Mode: allows you to change
between various modes. Once you change the mode, the
corresponding indicator displays at the top left of the display. Choose
from Camera, Camcorder, or Video Share.
• Shooting mode: allows you to set the shooting mode. Options
are:
– Single Shot: takes a single photo and view it before returning to the
shooting mode.
– Multi-Shot: takes a succession of consecutive photos.
– Mosaic Shot: takes multiple photos and then groups them together
into a single final photo.
– Frame Shot: allows you to choose a custom frame border for your
image. Choose from one of the 20 available frames. Press OK to assign
the frame.
– Panorama: takes a landscape photo by taking an initial photo and then
adding additional images to itself. The guide box lets you view the area
where the second part of the panoramic picture should fall within by
highlighting the box in orange. If you hold the camera still when it turns
orange, the picture is automatically taken. Repeat this step for up to 6
segments. When you are done, press the Camera key.
• Camera Resolution: allows you to set the image size to either:
2M(1600x1200), 1.3M(1280x960), 640x480, or 320x240.
• White Balance: allows you to set this option from the following
choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
• Night Mode: allows you to take better pictures at night. Select On or
Off.
• Timer: allows you to set a time delay before the camera takes
the photo or the camcorder begins recording video. Options
include: Off, 3 seconds, 5 seconds, or 10 seconds.
• Effects: allows you to change the color tone or apply special
effects to the photo or video. Options include: No Effects, Black
& White, Sepia, or Negative.
• Shortcuts: In camera mode, press one of the following keys to
go straight to the option:
– 1: Mode
– 2: Shooting Mode
– 3: Timer
– #: Viewfinder Mode
– *: Night Shot
• Settings: allows you to customize your camera settings. Choose from
the following options:
Settings: General tab
– Shutter Sound: allows you to select a tone to play when the camera’s
shutter opens and closes. Sound selections are Shutter 1, Shutter 2,
Shutter 3, or Off.
Camera
71
a687 Crunch.book Page 72 Tuesday, February 23, 2010 6:20 PM
– Default Storage: allows you to configure the default storage
location for images/videos as either Phone or Memory Card (if
inserted).
Settings: Camera tab
– Quality: allows you to set the image quality to: High, Normal, or
Economy.
– Single Shot Mode: allows you to select Take and Review or Take and
Preview.
– GPS: allows you to turn GPS On or Off (also known as Geotagging). The
location of where the picture is taken is attached to the picture. This
option is only available in Camera mode. The following GPS icons
display the GPS status:
–
: indicates that GPS is turned off.
–
: indicates that GPS is turned on and searching for GPS signal/
location information.
–
: indicates that GPS is turned on and has attained the GPS signal/
location information.
Settings: Camcorder tab
– Quality: allows you to set the video quality to: High, Normal, or
Economy.
– Movie Format: allows you to set the movie format to MP4, 3GP, or
Video Share.
Pictures/Videos Folder Options
After you have taken a photo or shot a video, you can access
various options:
䊳
Press Options and select one of the following:
• Take Photo/Record Video: allows you to take another photo or
record another video.
• Send/Send via: allows you to send the photo or video via Message, via
Mobile Share, or via Bluetooth.
• Set as: allows you to set the photo as Wallpaper or as a Caller ID.
• Rotate: rotates the photo in 90 degree increments.
Accessing the Picture Folder
1.
Press Menu ➔ My Stuff ➔ Picture.
2.
Highlight a photo and press
For information on editing a photo, see “Editing Images” on
page 67.
Assigning an Image to an Address Book Entry
1.
Press Menu ➔ My Stuff ➔ Picture ➔ <image>.
2.
Press Options ➔ Set as ➔ Caller ID
3.
Press Search Contact, highlight an entry and press
– or –
72
to open it in the viewer.
Editing a Photo
.
a687 Crunch.book Page 73 Tuesday, February 23, 2010 6:20 PM
Press New and follow the create a new Address Book entry
3.
with the image already assigned. For more information,
refer to “Understanding Your Address Book” on page 52.
Assigning an Image as a Wallpaper
Using the phone’s main display screen as a viewfinder,
adjust the image by aiming the camcorder at the subject.
4.
Press the Camera key again to record a video.
5.
Press Stop to stop recording and save the video file.
1.
Press Menu ➔ My Stuff ➔ Picture ➔ <image>.
– or –
2.
Press Options ➔ Set as ➔ Wallpaper.
Before shooting, press Menu and select Video Share.
The wallpaper appears as a preview.
3.
Important!: You must subscribe to the Video Share service and charges may
apply. Contact an AT&T customer service representative.
Press Select to set the wallpaper.
Using the Camcorder
In addition to taking photos, the camera also doubles as a
camcorder allowing you to also record, view, and send videos.
Shooting Video
Tip: When shooting video in direct sunlight or in bright conditions, it is
recommended that you provide your subject with sufficient light by
having the light source behind you.
1.
In Idle mode, press the Camera key
to activate the
7.
camera mode.
2.
• Video Share allows you to make a Video Share call by displaying a
screen where you can input the number of a recipient that also has
Video Share. (This option will only display if you have the Video
Share service.) If the recipient accepts the Video Share call, you
continue using the camcorder as usual.
• Press
to end the Video Share session. The recorded file
automatically saves and the file name displays. You can continue or
terminate the call.
6. Once the file saves, press
to play the video for review.
Press Menu, then Highlight Camcorder and press
Press
to return to the viewer.
.
Camera
73
a687 Crunch.book Page 74 Tuesday, February 23, 2010 6:20 PM
Camcorder Options
Options are represented by icons across the top of the screen
when you press the Menu key.
• Camera/Camcorder/Video Share Mode: allows you to change
between various modes. Once you change the mode, the
corresponding indicator displays at the top left of the display. Choose
from Camera, Camcorder, or Video Share.
• Recording Mode: select a video recording mode. Select Multimedia
Message to record a video suitable for an MMS message. Select
Normal to record a video within the limit of the currently available
memory.
• Camcorder Resolution: allows you to set the video size to
176x144 or 320x240 (if in Normal Recording Mode).
• White Balance: allows you to set this option from the following
choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
• Video Sound: allows you to turn the video sound On or Off.
• Timer: allows you to set a time delay before the camera takes
the photo or the camcorder begins recording video. Options
include: Off, 3 seconds, 5 seconds, or 10 seconds.
• Effects: allows you to change the color tone or apply special
effects to the photo or video. Options include: No Effects, Black
& White, Sepia, or Negative.
• Shortcuts: In camera mode, press one of the following keys to
go straight to the option:
74
– 1: Mode
– 2: Shooting Mode
– 3: Timer
#: Viewfinder Mode
• Settings: allows you to customize your camera settings. Choose from
the following options:
Settings: General tab
– Shutter Sound: allows you to select a tone to play when the camera’s
shutter opens and closes. Sound selections are Shutter 1, Shutter 2,
Shutter 3, or Off.
– Default Storage: allows you to configure the default storage
location for images/videos as either Phone or Memory Card (if
inserted).
Settings: Camera tab
– Quality: allows you to set the image quality to: High, Normal, or
Economy.
– Single Shot Mode: allows you to select Take and Review or Take and
Preview.
– GPS: allows you to turn GPS On or Off (also known as Geotagging). The
location of where the picture is taken is attached to the picture. This
option is only available in Camera mode. The following GPS icons
display the GPS status:
–
: indicates that GPS is turned off.
–
: indicates that GPS is turned on and searching for GPS signal/
location information.
a687 Crunch.book Page 75 Tuesday, February 23, 2010 6:20 PM
–
: indicates that GPS is turned on and has attained the GPS signal/
location information.
Settings: Camcorder tab
– Quality: allows you to set the video quality to: High, Normal, or
Economy.
– Movie Format: allows you to set the movie format to MP4, 3GP, or
Video Share.
Accessing the Video Folder
1.
2.
Press Menu ➔ My Stuff ➔ Video.
Highlight the On phone or On card tab (wherever the video
• Delete: allows you to delete the Selected video or Multiple videos.
• Rename: allows you to rename the video file.
• Move: allows you to choose the Selected or Multiple videos to
move.
• Copy: allows you to copy a selected or multiple videos.
• Record Video: allows you to record another video.
• Create Folder: creates a new My Stuff folder on either the Phone or
Memory Card.
• More: provides you with the ability to Lock or Unlock a video, set
Bluetooth Visibility, Sort by, or view the video Properties.
resides) and select a video from the list.
3.
Press to
view the video.
– or –
Before you play the video press Options and select one of
the following:
• Play: plays the selected video file.
• Video Share Call: allows you to launch the Video Share Application.
Note: The file format must be compatible with the Video Share format.
• Send: allows you to send the video via Multimedia Message, via
Mobile Share, or via Bluetooth.
Camera
75
a687 Crunch.book Page 76 Tuesday, February 23, 2010 6:20 PM
Section 10: Mobile Video
Your phone is equipped with a WAP (Wireless Application
Protocol) browser which allows you to access the Internet and
download media files directly to your phone. These media files
display using the built-in Media Player. Mobile Video is a media
service which allows you to stream media content (Weather,
News, Sports highlights, etc.) directly to your phone.
1.
In Idle mode, press Menu ➔ Mobile Video to launch the
default Mobile Video homepage. When the homepage
displays, you can access the following content categories:
• My Favorites: allows you to choose from recently uploaded video
clips from media providers such as CNN, ESPN, HBO Mobile
Preview, and NBC.
• Video Categories: provides some general content categories from
which to search for media: Entertainment, Sports, News & Weather,
Music, Kids & Cartoons & HBO Mobile.
• Customize Mobile Video: allows you to access the Mobile Video
Settings menu where you can configure most of the settings
associated with Mobile Video.
• Help: provides basic on-line assistance which answers most of the
common issues users come across while using this feature.
2. Select from one of the available categories by highlighting
an option and pressing the
76
key.
Viewing a Video Clip
1.
In Idle mode, press Menu ➔ Mobile Video.
2.
Select the video clip by highlighting the entry from within
the Favorites section and pressing the
3.
key.
After the stream has been buffered into memory, you can
choose to either pause or play the content.
• Press the Pause/Play button to toggle between the two functions.
• Press the Exit button to redisplay the Mobile Video homepage.
Using the Video Categories
This grouping of media categories provides access to an
additional listing of streaming media. Although the previously
mentioned Favorites list of media stream is user configurable,
this list of categories is defined by Mobile Video’s homepage and
is not configurable.
Customizing Mobile Video
Updating the Favorites List
You can edit and change the list of media providers which display
in the Favorites section of the Mobile Video homepage.
a687 Crunch.book Page 77 Tuesday, February 23, 2010 6:20 PM
1.
In Idle mode, press Menu ➔ Mobile Video ➔ Customize
Mobile Video ➔ Edit My Favorites. The screen is
composed of two sections:
• Manage My Favorites: lists the current Favorites list and gives you
the option of opening the page or deleting it from your Favorites.
• Add to Favorites: selecting an item moves it to the Favorites list.
2. Do one of the following:
• Press
to delete a Favorite.
• Press
to open a Favorite.
• Press
to move an item to the Favorites.
Adding a Video Alert
My Purchases
Use the Mobile Video homepage to shop for streaming
multimedia content. The My Purchases section can help keep
track of your purchase history and view any new resale products.
1.
In Idle mode, press Menu ➔ Mobile Video ➔ Customize
Mobile Video ➔ My Purchases ➔ Purchase History. This
provides you with an on screen listing of your “to date”
purchase history for media content.
2.
Press My Account. This provides you with an on-screen
description of your account details.
When new media is available for upload to your phone (such as
breaking news), you can set your phone to notify you of the new
available content.
1.
In Idle mode, press Menu ➔ Mobile Video ➔ Customize
Mobile Video ➔ My Video Alerts ➔ Add to My Alerts.
2.
Press the red circle next to any of the available alert
services listed within the Add to My Alerts section of the
page (ex: Breaking News).
Mobile Video
77
a687 Crunch.book Page 78 Tuesday, February 23, 2010 6:20 PM
Section 11: Messaging
This section describes how to send or receive different types of
messages. It also includes the features and functionality
associated with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• Multimedia (Picture and Video) Messages
• IM Messages
• Mobile Email
• Voicemail
The Short Message Service (SMS) lets you send and receive text
messages to and from other mobile phones or email addresses.
To use this feature, you may need to subscribe to your service
provider’s message service.
The Multimedia Messaging Service (MMS) lets you send and
receive multimedia messages (such as picture messages and
video messages) to and from other mobile phones or email
addresses. To use this feature, you may need to subscribe to
your service provider’s multimedia message service.
Important!: When creating a message, adding an image, a sound file, or a
video clip to a text message changes the message from a text
message to a multimedia message.
Messaging icons display at the top of the screen and indicate
when messages are received as well as their type. For more
information, refer to “Icons” on page 13.
Creating and Sending Messages
1.
From the Idle screen, press Menu ➔ Messaging ➔ Text ➔
Compose New Message.
Tip: In Idle mode, you can access your messages by pressing up on the
Navigation key.
2.
Enter a phone number or email address in the Recipients
field.
– or –
Press Add from the Recipients field and select one of the
following:
• Contacts: to select a recipient from your Contacts list (valid entries
must have a wireless phone number or email address).
78
a687 Crunch.book Page 79 Tuesday, February 23, 2010 6:20 PM
• Groups: to select a recipient from the Group list.
• Recent Contacts: to select a recipient from a list of recently sent
messages.
3. Select the message field and use the QWERTY keypad to
enter a message. For more information, refer to “Entering
Text” on page 18.
4.
1.
is used as a business card). For more information, refer to
“Adding a New Contact” on page 53.
2.
Press Menu ➔ Address Book ➔ Contacts.
3.
Highlight the contact (the business card) in which you are
sending and press the
Press Insert then press the Right Navigation key and select
one of the following to insert:
• Picture: inserts a picture from My Pictures folder, or you can take
a picture.
• Video: inserts a video from the My Videos folder, or you can record
a video.
• Audio: allows you to choose an existing audio file from the My
Audios folder, or record an audio file.
• Attachment: attaches a Favorite URL, Contact Info, File, Contact
Card, Event, Tasks, or Note.
• Options: allows you to Preview the file, View Attachment, Add
Slide, or Delete slide. Press the corresponding number on the
keypad to select the displayed option.
5. Review your message and press Send.
Attaching Business Card to a Message
To attach your Business Card to an outgoing message, follow
these steps:
Create a contract entry (the information stored in the entry
4.
key.
Press Options ➔ Send business card via and press the
Right Navigation key.
5.
Select Message and press the
6.
Enter your message.
7.
Add recipient(s) and press Send.
key.
Viewing New Received Messages
1.
In Idle mode, new messages are indicated by icons and a
New Message pop-up.
2.
Press the View button from the New Message pop-up.
Note: If you accidentally exit from this notification screen, navigate to Menu
➔ Messaging ➔ Text to access your messages.
3.
Your message displays on the screen.
Messaging
79
a687 Crunch.book Page 80 Tuesday, February 23, 2010 6:20 PM
Using Message Options
Message options at the Inbox level differ according to the
message type, what you have done with the message, and
whether you are viewing the message.
䊳
While viewing the list of messages highlight a message and
press the Options soft key to access the following:
• View: allows you to view the message.
• Compose New Message: allows you to compose a new message.
• Reply All: allows you to reply to all the recipients included in this
message.
• Reply to <phone number>: allows you to reply in a message to
this phone number.
• Delete Conversation: deletes the selected or multiple
conversations or messages.
• See All Recipients: displays all the recipients copied on this
message.
• Call <phone number>: dials the phone number for this recipient.
• View Sender’s Details: displays the sender’s detail information if
the sender is in your Contact List.
80
䊳
With a message open for reading, use any of the following
menu options:
• Reply to <phone number>: allows you to compose and send a
reply to the message. This option reads Reply (when replying to an
SMS [Text] message), and Reply to (when replying to an MMS
[Multimedia] message).
• Call <phone number>: dials the recipients phone number.
• Save to Address Book: allows you to save the recipient or sender’s
information from the message to your Address Book as either a New
or Updated entry. For more information, refer to “Understanding
Your Address Book” on page 52.
• Forward Message: allows you to forward the message.
• Add to Favorites: adds this recipient to the Favorites list.
• Delete Message: deletes the current message.
• Clear Conversation: deletes the conversation
• View All Conversations: displays all the conversations stored in
the Conversations log.
• View Sender’s Details: displays the sender’s detail information if
the sender is in your Contact List.
a687 Crunch.book Page 81 Tuesday, February 23, 2010 6:20 PM
Deleting Messages
2.
When your phone’s memory is full, an notification message
displays and you cannot receive any new messages. Use the
Delete option to erase obsolete messages, freeing memory for
new messages. You can delete the messages either individually
or all at one time.
1.
Press Menu ➔ Messaging ➔ Text.
All messages are stored in the Text folder.
Off, 1 Month Old, 2 Weeks Old, 1 Week Old, or The Oldest
When Full and press Save.
Predictive Text Mode
This method automatically compares the series of keystrokes you
make with an internal linguistic dictionary to determine the most
likely word, should you accidentally misspell a word.
1.
key.
From the Messaging Settings page, press Predictive Text
2.
Select a message to delete and press the
3.
With the message displayed, press Options ➔ Delete
2.
Select On and press Save.
Message and press the
3.
Press Menu ➔ Messaging ➔ Text ➔ Compose New
4.
While entering text, if you misspell a word or the word is
key.
Mode.
Messaging Settings
To configure the settings for text messages, multimedia
messages, Voice mails, and Push messages.
䊳
Select the age of messages before cleanup. Selections are:
Press Menu ➔ Messaging ➔ Messaging Settings.
Auto Cleanup
When you configure the Auto Cleanup option, messages are
automatically removed from the Text folder without a warning
message.
1.
Message.
not in the internal dictionary, a word option is displayed. If
the word you want is displayed, press the Right Navigation
key and the word will be entered in the message. Press the
Up or Down Navigation key to scroll through other available
words. If no words are correct, press the
key to
backspace.
From the Messaging Settings page, press Auto Cleanup.
Messaging
81
a687 Crunch.book Page 82 Tuesday, February 23, 2010 6:20 PM
Receiving Options
This option specifies the category of messages you want to
receive and allows you to set the following:
• Send Delivery Report: when this option is enabled, the phone informs
the network whether or not your message was received.
• Reject Anonymous: automatically rejects messages with a category
of unknown or rejects unknown messages when turned off.
• Reject Advertisement: rejects messages with a category of
advertisement.
• Allow Web Message: allows messages with a category of Web.
Auto Resize Image
Use this option to configure the size limits of the images added to
new picture messages. Images larger then your setting, are
resized to meet this value. Options include: No Resize, 100 KB,
300 KB, or 600 KB.
Creation Mode
Creation Mode allows you to limit your phone from including
content in multimedia messages that may not be supported by
the network or the receiving device. The following options are
available:
• Free: Select Free to create a multimedia message with no restrictions.
• Warning: Sends a warning when unsupported content is included in a
message.
82
• Restricted: Prevents you from including unsupported content.
Message Center Address
The Message Center Address option allows you to change the
settings used with the Text Message Center and the Multimedia
Message Center.
Voicemail Number
The Voicemail Number option allows you edit the existing number
and create a new number to use when accessing remote
voicemail.
Important!: Changing the Voicemail Center Address can affect your ability to
access your voicemail. Check with your provider’s Customer
Service before changing.
Used Space
You can check the amount of the memory used and the memory
remaining for Multimedia, Conversations, Messages, Push
Message, and Configuration Message. The display shows the
total space including the used and free space. You can also view
how much space is currently occupied by each message box.
1.
Press Menu ➔ Messaging ➔ Messaging Settings ➔ Used
Space.
a687 Crunch.book Page 83 Tuesday, February 23, 2010 6:20 PM
2.
Press a particular folder for review or both size and
4.
contents within the selected folder.
3.
Press Back to return to the Messaging Settings screen.
Using Instant Messaging (IM)
Instant Messaging allows you to send and receive instant
messages using AIM, Windows Live, and Yahoo!® communities.
Note: Before using this feature, you need to subscribe to a messaging
service. For further details, contact your service provider.
Signing into Your IM Account
Although each account type differs, the initial sign in procedure is
common to all supported types. Before beginning the sign in
procedure, you must complete the previous procedures for
selecting your default IM Community to which you are
subscribed.
Check the Save password or Auto-Sign In checkbox (if
desired).
5.
Press Sign In to continue.
Note: Options and required fields will differ depending on the IM client you
have selected.
Using Mobile Email
Take your email with you! With Mobile Email you can check your
Yahoo! Mail, AOL Mail®, AIM Mail, Windows Live Hotmail, AT&T
Mail, Gmail, and other providers quickly and easily.
Signing into Your Mobile Email
To sign into your Mobile Email, follow these steps:
1.
Press Menu ➔ Mobile Email.
2.
Highlight an Email carrier of your choice and press Select.
Select a domain and press Select.
1.
Press Menu ➔ Messaging ➔ IM.
3.
2.
Select an IM client (AIM, Messenger, or Yahoo!).
4.
Enter your Email Address and Password then press Sign In.
3.
Select New Account and then select the available fields to
5.
Follow on-screen instructions to complete the process.
enter your information such as Sign In as, Screen Name, Email Address or Yahoo! ID, and Password. Select any
additional fields.
Voicemail
This option dials and connects you to the Voicemail center. Follow
the prompts to configure options or receive messages.
Messaging
83
a687 Crunch.book Page 84 Tuesday, February 23, 2010 6:20 PM
Section 12: Games & Applications
Games
The Games menu option allows you to access games that are on
the phone and also shop for games using AppCenter. You can
download new games and then save them to the Games folder.
1.
Press Menu ➔ My Stuff ➔ Games.
2.
From the Games menu, press a pre-installed application or
press Shop Games.
• Bubble Bash 2
• Diner Dash 2
• Ms. PAC-MAN by Namco
• Tetris
3. Follow the on-screen instructions.
Shop Games
1.
Press Menu ➔ My Stuff ➔ Games ➔ Shop Games to
2.
Follow the on-screen instructions. The file is downloaded
launch AppCenter.
and stored in the Games folder.
84
Note: Service charges and subscription purchase may be required.
For more information, refer to “AppCenter” on page 87.
Applications
The Applications menu option allows you to access applications
that are on the phone and also shop applications using
AppCenter. You can download applications and then save them to
the Applications folder.
1.
Press Menu ➔ My Stuff ➔ Applications.
2.
From the Applications menu, press a pre-installed
application or press Shop Applications.
• Browser: allows you to access the internet using att.home.
• AllSport GPS: This application allows you to track how far and fast
you run, walk, jog, or bike and it tells you how many calories were
burnt.
• AppCenter: The AppCenter allows you to shop for Ringtones,
Games, Cool Tools/Apps, Videos, Color Graphics, Answer Tones,
and Multimedia using the built-in browser. You can also access the
MEdia Home site.
• AT&T Navigator: is a JAVA based driving aid that uses GPS
navigation.
a687 Crunch.book Page 85 Tuesday, February 23, 2010 6:20 PM
• AT&T Social Net: is a single mobile application with a live
connection to your favorite social networks such as Facebook,
Twitter, Myspace, and the News.
• Loopt: is a cellphone-based GPS sharing system that allows users
to visualize one another using their cell phones and share
information. Loopt also enables users to explore the world around
them by connecting users with integrated content from Yelp and
other applications. For more information, refer to “Loopt” on
page 99.
• Make-UR-Tones: The Make-UR-Tones application allows you to
create customized ringtones from full-track songs.
• Mobile Banking: You can access your banking information on your
phone. Mobile Banking allows you to view balances, perform
transfers, view account history and pay bills directly from your
mobile phone. Mobile Banking Providers include: U.S. Bank, Sun
Trust, Regions, USAA, and Citi Mobile for Cards.
• Mobile Email: Take your email with you! With Mobile Email you can
check your Yahoo!® Mail, AOL®, AIM, Windows Live Hotmail,
AT&T Yahoo!®, Gmail, and other providers quickly and easily.
• Mobile Web: Your phone is equipped with att.net, your access to
the mobile web.
• MobiTV: This is a subscription service that allows you to watch your
favorite TV shows using your handset.
• MobiVJ: This is a subscription service that allows you to watch
unlimited music videos using your handset.
• Movies Powered by IMDb: allows you to access biographies and
photos from thousands of films, actors, directors, producers and
more. You can also access photo galleries, search local theatres for
show times, order tickets directly from your mobile phone, check
out new releases and hot tips, and watch a featured movie of the
day.
• MusicID 2: This is an application which uses the onboard
microphone to analyze a music sample and then identify the song.
Once the application completes the analysis of the song sample, it
then provides you with the name of the song, artist and album art
as well as opportunities to buy related content.
• My-Cast Weather: This is a user-friendly application which runs on
your mobile phone giving you access to all the weather information
you need. You can check current and predicted National Weather
Service data for your immediate location, your travel destination, or
virtually anywhere else in the continental U.S.
• Where: is a downloadable mobile application that uses your current
location (obtained via the built-in GPS) to help you find places of
interest, things to do, and local information while you’re on the go.
• WikiMobile: With WikiMobile, you gain access to all 2 million
Wikipedia articles, including pictures and quick facts. Bookmark
your favorites for quick and easy tracking. Being a walking
encyclopedia is now at your fingertips.
• XM Radio: This service allows you to stream approximately 25
channels of commercial-free music through your handset.
• Yellowpages: The Yellowpages Mobile application provides quick
and ready access to businesses, map locations, and storage of
Games & Applications
85
a687 Crunch.book Page 86 Tuesday, February 23, 2010 6:20 PM
3.
your favorite searches (My Place). This application allows you to tap
into local businesses, locations, and events, connecting you to your
search in real-time.
Follow the on-screen instructions.
Shop Applications
1.
Press Menu ➔ My Stuff ➔ Applications ➔ Shop
2.
Follow the on-screen instructions to purchase the new
Applications to launch AppCenter.
application. The file is downloaded and stored in the
Applications folder.
3.
To access a new application, press the entry from the
available list.
Note: Service charges and subscription purchase may be required.
For more information, refer to “AppCenter” on page 87.
86
a687 Crunch.book Page 87 Tuesday, February 23, 2010 6:20 PM
Section 13: AppCenter
The AppCenter allows you to shop for Ringtones, Games, Cool
Tools/Apps, Videos, Color Graphics, Themes, and Answer Tones
using the built-in browser. You can also access the MEdia Net
Home site.
䊳
Press Menu ➔ AppCenter to launch the AppCenter application.
Ringtones
This option allows you to shop for ringtones using the built-in
browser.
1.
Press Menu ➔ AppCenter ➔ Ringtones.
2.
Select an entry.
3.
Follow the on-screen instructions to purchase a ringtone.
Games
This option allows you to shop for games using the built-in
browser.
1.
Press Menu ➔ AppCenter ➔ Games.
2.
Follow the on-screen instructions to purchase games for
your phone.
Cool Tools/Apps
This menu option allows you to shop for tools and applications
using the built-in browser. You can download new tools and
applications to your Applications folder.
1.
Press Menu ➔ AppCenter ➔ Cool Tools/Apps.
2.
Follow the on-screen instructions to purchase a tool or an
application.
Videos
This menu option allows you to shop for Videos using the built-in
browser. You can download new images to your Videos folder.
1.
Press Menu ➔ AppCenter ➔ Videos.
2.
Follow the on-screen instructions to purchase a video.
Color Graphics
This menu option allows you to shop for graphic images using
the built-in browser. You can download new images to your
Pictures folder.
1.
Press Menu ➔ AppCenter ➔ Color Graphics.
2.
Follow the on-screen instructions to purchase a color
graphic.
AppCenter
87
a687 Crunch.book Page 88 Tuesday, February 23, 2010 6:20 PM
Themes
This menu option allows you to shop for new themes so you can
customize your phone.
1.
Press Menu ➔ AppCenter ➔ Color Graphics.
2.
Follow the on-screen instructions to purchase a theme.
Answer Tones
This menu option allows you to shop for answer tones using the
built-in browser.
1.
Press Menu ➔ AppCenter ➔ Answer Tones.
2.
If prompted to accept a redirection, press Ok.
3.
Follow the on-screen instructions to purchase an answer
tone.
MEdia Net Home
The MEdia Net menu option allows you to quickly access your
MEdia Net homepage using the built-in browser. This page gives
you quick access to information such as local weather, sports
scores, horoscope information and quick links to the previously
mentioned shopping sites. To access this menu option, use the
following steps:
䊳
When the Idle screen displays, press the Menu ➔ AppCenter ➔
MEdia Net Home to launch the built-in browser and launch this
88
AT&T homepage.
AppCenter Options
䊳
From the AppCenter home page, press the Options soft key.
The following options display:
• MEdia Mall Home: takes you back to the AppCenter home screen.
• MyMEdia Club: enables you to join the MyMEdia Club, where you can
earn credits toward the purchase of tones, graphics, and games in the
AT&T AppCenter.
Note: A monthly charge is applied for MyMEdia membership.
• MEdia Mall Account: shows a history of your AppCenter account.
• My Answer Tones: allows you to shop for answer tones using the
built-in browser.
• Recently Viewed: shows the most recently viewed ringtones, games,
videos, graphics, and answer tones.
• Exit: takes you back to the Main menu.
a687 Crunch.book Page 89 Tuesday, February 23, 2010 6:20 PM
Section 14: AT&T Music
AT&T Music is a music service which provides you access to
Music Player, Shop Music, MusicID 2, XM Radio, Music Videos,
Make-UR-Tones, Community, and Music Applications.
• Download music and ringtones over the AT&T network directly to your
device by using the Shop Music feature.
• Add music from your existing digital media collection through Windows
Media Player®.
Note: The Music Player does not necessarily support all features of a
particular file format nor all the variations of those formats. Copyright
protections may prevent some images, music (including ringtones) and
other content from being copied, modified, transferred or forwarded.
Accessing AT&T Music
1.
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
2.
key.
Use the Down Navigation key to scroll through the list of
available options.
Note: Audio files less than 300 KB are treated as ringtones, whereas audio
files which are greater than 300 KB are stored in the Music Folder. A
user can not set an MP3 file as a ringtone if it is larger than 300 KB.
Adding Music to your Handset
Music files (such as ringtones) can be added to your handset by
using one or more of the following methods:
• Add music from music store partners through the applicable music
client.
Note: If the Bluetooth feature is currently active on your handset, USB
communication is not available. To transfer files to your handset, turn
off the Bluetooth functionality (Settings ➔ Connectivity
➔ Bluetooth).
Using the Music Player
The Music Player is an application that can play music files. The
music player supports files with extensions AAC, AAC+, eAAC+,
MP3, WMA, 3GP, MPEG, MP4, and M4A. Launching the Music
Player allows you to navigate within your Music folders and
select playback material.
1.
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
2.
key.
Highlight Music Player and press the Select soft key or
the
key.
AT&T Music
89
a687 Crunch.book Page 90 Tuesday, February 23, 2010 6:20 PM
3.
Highlight a folder from the folders available and press the
key to open the folder.
4.
Highlight a song and press the
key to play the song.
Note: The maximum number of songs you can synchronize between your
phone and your PC is 1500.
Music Player Options
The Music Player options menu configures your phone’s music
playing options such as shuffling the music files, looping music
files, adding songs to the playlist, and more.
1.
In Idle mode, press Menu ➔ AT&T Music ➔ Music Player
and press the Select soft key or the
2.
Navigate to a music file and press the
key.
key. The music
file will begin to play.
3.
Press the Options soft key and select one of the
• Shuffle: allows you to turn shuffle On or Off. When turned on, the
current list of songs are randomly shuffled for playback.
• Loop: repeats the currently active song or replays each
song in the current list and as the last song in the list ends,
the player replays all of the songs in the listed order.
• Add to Playlist: adds the currently active song to either a new or
current playlist.
• Send via: sends the selected music file in a message or to a
Bluetooth enabled device.
• Shop Music: allows you to access the internet to shop for music.
• Equalizer: allows you to select from one of the preset equalizer
settings. Select from Normal, Rock, Pop, Dance, Classic, or Jazz.
• Download Status: allows you to view the status of the downloaded
music files.
• Properties: displays properties related to the selected song such
as: Artist, Title, Size, Format, Track length, Genre, Description, and
Track Number.
4. Press the Select soft key and follow the prompts to set the
following options:
• Pause/Resume: pauses or resumes playing the song when
pressed.
• Switch to Bluetooth Headset: transfers the selected music file to a
Bluetooth stereo headset.
• Minimize: continues to play the music but hides the player in the
background.
90
selected option.
Playing Music Transferred to the Handset
1.
In Idle mode, press Menu ➔ AT&T Music ➔ Music Player
➔ All Music and press the Select soft key or the
key.
a687 Crunch.book Page 91 Tuesday, February 23, 2010 6:20 PM
Note: All Music displays all of the downloaded songs or all of the songs
stored on the phone or microSD card.
2.
Use the Up or Down Navigation key to select the song you
want to listen to and press the
key.
Playing Music through a Stereo Bluetooth Device
Your device supports the Stereo Bluetooth profile (A2DP) that
when synchronized to a stereo Bluetooth headset plays music in
stereo.
1.
Pair your handset to a stereo Bluetooth device. For specific
• Call: make or receive a call (music player is paused)
• Messaging: send or receive a text or multimedia message. Music
continues to play unless an audio clip is received as a part of a
multimedia message.
• Mobile Web: browse the web (music continues to play).
• Games: lets you play games while listening to music.
Note: Playing music and pausing the music player uses the same amount
of battery.
1.
pairing procedures, see “Connectivity” on page 44.
2.
In Idle mode, press Menu ➔ AT&T Music ➔ Music Player
➔ All Music and press the Select soft key or the
3.
Select a song and press the
Playing Music while Using the Phone
The Music Player allows you to play music in the background
while performing other tasks on your phone. The music pauses
when an incoming call is accepted, and the music resumes when
the call ends. Music continues to play when you receive a Text
Message, Multimedia Message, or an Instant Message.
The other functions you can use are:
2.
key.
Select a folder and press the Select soft key or the
key.
key.
key to play the song.
In Idle mode, press Menu ➔ AT&T Music ➔ Music Player
and press the Select soft key or the
3.
Highlight a song to play and press the
4.
Once the music starts to play the music icon (
key.
)
displays on the top of the screen.
5.
To hide the Music Player, press the Options soft key and
select the Minimize option or press the
6.
Press the Rewind
key once.
(Left Navigation key) to navigate to
the previous song. To temporarily stop the music, press
Pause
(Center
key). Press the Fast Forward
AT&T Music
91
a687 Crunch.book Page 92 Tuesday, February 23, 2010 6:20 PM
(Right Navigation key) to advance to the next song. While
4.
playing the music in Idle mode, you can exit the Music
player by pressing the
key.
field and press the Save soft key.
5.
Using Playlists
Playlists are used to assign songs to a list of preferred media
which can then be grouped into a list for later playback. These
Playlists can be created via either the handset’s Music Player
options menu or from within a 3rd party music application (such
as Windows Media Player) and then downloaded to the handset.
Creating a Playlist
1.
In Idle mode, press Menu ➔ AT&T Music ➔ Music Player
➔ Playlists ➔ New Playlist and press the Select soft key
or the
Select All and press the Right Navigation key.
3.
Select a song or All from the list and press the Check soft
key to place a check mark next to the song.
92
to continue adding music from your phone or memory
card.
6.
Press the
key to return to Idle mode.
Adding Songs to a Playlist
1.
In Idle mode, press Menu ➔ AT&T Music ➔ Music Player
and press the Select soft key or the
key.
2.
Highlight Playlists and press the Right Navigation key.
3.
Highlight the previously created playlist.
4.
Press the Options soft key, select Add Tracks and press
the
5.
key.
Highlight All, an individual song, or multiple songs and
press the
key.
2.
To continue creating the Playlist, highlight the playlist you
just created, press Options ➔ Add Tracks, or Shop Music
After the Music Player enables, you can listen to music in the
background while performing other phone functions.
Important!: When finished using the Music Player function, press the
key twice to stop the function and prevent the battery from losing
its charge. Pausing the player continues to use the battery.
Press the Add soft key, enter a playlist name in the Name
key to place a check mark beside your
selection.
6.
Press the Add soft key and wait for the song to add to the
current playlist.
a687 Crunch.book Page 93 Tuesday, February 23, 2010 6:20 PM
Removing songs from a Playlist
1.
Select soft key or the
2.
1.
In Idle mode, press Menu ➔ AT&T Music and press the
key.
Open Windows Media Player on your computer (version
10.0 or higher).
2.
Use the USB adapter cable to connect the handset to the
Highlight Music Player and press the Select soft key or
target PC. A USB to PC icon (
the
when an active connection establishes.
key.
3.
) displays on the screen
Once the USB connection establishes, the handset displays
3.
Highlight Playlists and press the Right Navigation key.
4.
Highlight the previously created playlist and press the
"Connected" and the computer screen displays the A687
Right Navigation key. The tracks added display.
device.
5.
Highlight the track to delete, press the Options soft key,
scroll to Remove and press the Select soft key or the
key.
6.
At the Remove <title of song>? prompt press the Yes soft
Note: If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, please follow
steps 5 - 7 from “Transferring Music from the Digital Music Stores” on
page 95.
4.
key to remove the song from the playlist, or press the No
From within the Windows Media Player application, click
on the Library tab.
soft key to cancel.
5.
On the left side of the screen, under Playlists, click Create
Importing a Playlist from Windows Media Player
6.
Under Library, select Music. The downloaded songs list
Important!: For this procedure to work you must disable Bluetooth (see
“Activation” on page 44.) and enable USB mode (see “Configuring
Your Phone’s USB Settings” on page 46.).
7.
7.
Press the
key to return to the AT&T Music screen.
playlist and name the playlist A687-Phone.
displays.
Highlight a song from the list, right click and select
Add to ➔ A687-Phone.
AT&T Music
93
a687 Crunch.book Page 94 Tuesday, February 23, 2010 6:20 PM
Note: If there are no items present in the playlist, click the Edit Playlist button
and begin adding the music files from among the various media
categories.
8.
From the Windows Media Player application, ensure that
the SGH-A687 device displays in the upper-right corner of
the screen. If not, click on Next device until SGH-A687
displays.
9.
13. Highlight Playlists and press the Right Navigation key.
The SGH-A687 playlist displays.
14. Press the
Shop Music/Tones
Use AT&T Music to shop for ringtones, Answer Tones™ and
songs from some of your favorite music stores.
1.
From the Windows Media Player application, in the
upper-left corner of the screen, under Playlists, drag and
2.
3.
Use the Up or Down Navigation key to highlight your music
soft key or the
4.
handset.
Select soft key or the
key.
12. Highlight Music Player and press the Select soft key or
key.
key.
From the Categories listing, highlight the desired entry
and press the
11. In Idle mode, press Menu ➔ AT&T Music and press the
94
Highlight Shop Music and press the Select soft key or the
store of choice (or select Ringtones), and press the Select
handset.
10. It is now safe to unplug the USB connector from the
key.
key.
button. The playlist synchronizes to the SGH-A687
the
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
drop the SGH-A687 playlist to the Sync list on the
lower-right portion of the screen and press the Start Sync
key to return to Idle mode.
key. Press the Back soft key to return
to the previous page.
5.
Press the
key to return to the AT&T Music screen.
a687 Crunch.book Page 95 Tuesday, February 23, 2010 6:20 PM
Transferring Music from the Digital Music Stores
7.
1.
Download a song to your PC.
2.
Insert the microSD card into the handset. For more
information see “Installing the Memory Card” on page 6.
3.
Use the USB adapter cable to connect the handset to the
target PC. A USB to PC icon (
) displays on the screen
when an active connection is established.
4.
Once the USB connection is established, the handset
displays "Connected" and the computer screen displays
from the drop-down menu. This step begins the download
process.
Note: The Music Player does not necessarily support all features of a
particular file format nor all the variations of those formats. Copyright
protections may prevent some images, music (including ringtones) and
other content from being copied, modified, transferred or forwarded.
Transferring Music using a Media Application
A USB cable, microSD card, and a current version of a media
application (such as Windows Media Player) are required for this
procedure.
1.
2.
Connectivity ➔ Select USB Mode ➔ Music Player.
6.
Use the USB adapter cable to connect the handset to the
target PC. A USB to PC icon (
Note: If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, please follow
steps 5 - 7.
When the Idle screen displays, press Menu ➔ Settings ➔
Open Windows Media Player on your computer (version
10.0 or higher).
your device. If the detection occurs, skip to step 11.
5.
Using your right mouse button, click on the highlighted
song and select Transfer Track(s) to Portable Device
In order to download music from the computer to your handset, a
microSD card and USB data cable are required. These items are
sold separately; go to www.wireless.att.com/cell-phone-service/
accessories/.
) displays on the screen
when an active connection establishes.
3.
Once the USB connection establishes, the handset displays
"Connected" and the computer screen displays the A687
device.
Highlight the song you wish to download to the handset.
AT&T Music
95
a687 Crunch.book Page 96 Tuesday, February 23, 2010 6:20 PM
Note: If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, please follow
steps 5 - 7 from “Transferring Music from the Digital Music Stores” on
page 95.
4.
From within the Windows Media Player application, click
on the Library tab and select Songs. The downloaded
songs list displays.
Note: If there are no items present in the playlist, click the Edit Playlist button
and begin adding the music files from among the various media
categories.
5.
Plug the USB cable into the phone.
6.
From the Windows Media Player application, ensure that
the SGH-A687 device displays in the upper-right corner of
8.
handset.
9.
7.
From the Windows Media Player application, in the
upper-left corner of the screen, under Library, drag and
drop the song to the Sync list on the lower-right portion of
the screen and press the Start Sync button. The song
synchronizes to the A687 handset.
96
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
key.
MusicID 2
MusicID 2 is an application which uses the onboard microphone
to analyze a music sample and then identify the song. Once the
application completes the analysis of the song sample, it then
provides you with the name of the song, artist and album art as
well as opportunities to buy related content.
1.
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
2.
key.
Highlight MusicID 2 and press the Select soft key or the
key.
the screen. If not, click on Next device until SGH-A687
displays.
It is now safe to unplug the USB connector from the
3.
Select any of the following options by selecting an entry:
• Identify Song: begins the analysis of the song being sampled
through the handset’s microphone.
• Explore: allows you to search for the music you like.
• Profile: provides a list of recently identified song and allows you to
obtain information about the song, delete the song, or send the
MusicID 2 as a link to another phone number.
a687 Crunch.book Page 97 Tuesday, February 23, 2010 6:20 PM
• Help: provides you with on screen descriptions of several key
MusicID 2 features.
• EXIT: allows you to exit the application and return to the main AT&T
Music menu.
4. Make a selection and follow the on-screen instructions.
To exit the application at any time, press
.
3.
Radio service and follow the on screen prompts.
4.
5.
Note: MobiRadio does not work with Bluetooth. Periodically, the application
asks the customer to confirm that they are still listening to the stream.
In Idle mode, press Menu ➔ AT&T Music and press the
Accessing Music Videos
This page provides you with links to some of the most popular
multimedia content.
1.
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
2.
3.
key.
Highlight Music Videos and press the Select soft key or
the
key.
During the initial setup, press OK to acknowledge the data
service usage information and verify your subscription.
key.
Highlight XM Radio and press the Select soft key or the
key.
key to stream to your
phone.
Note: Since this product uses a large amount of data in its stream process,
you should note that you are responsible for all data charges incurred.
It is recommended that you subscribe to an unlimited data plan so that
you are not charged for data overages.
Select soft key or the
key.
Use the Up or Down Navigation key to highlight a specific
radio channel and press the
This service allows you to stream approximately 25 channels of
commercial free music through your handset.
2.
Use the Up or Down Navigation key to highlight a radio
station category from the guide list and press the
Using XM Radio
1.
Press the Continue soft key to accept the terms of the XM
4.
Press the Accept soft key to agree to the terms of the
MobiVJ service and follow the on screen prompts. A
welcome video is then displayed.
AT&T Music
97
a687 Crunch.book Page 98 Tuesday, February 23, 2010 6:20 PM
5.
Highlight a desired video station and press the
key to
view music videos.
Select soft key or the
2.
Viewing a Video Clip
䊳
and press the Select soft key or the
In Idle mode, press Menu ➔ AT&T Music and press the
Highlight Make-UR-Tones and press the Select soft key
or the
3.
key.
key.
This Community is a place where you can find a listing of various
fan sites that provide sound clips, wallpapers, bios,
discographies, and other information about an artist.
1.
98
In Idle mode, press Menu ➔ AT&T Music and press the
key.
key to return to Idle mode.
The Music Applications option accesses the internet to provide
Music tools for your handset. Services provided on this site may
include, MusicID 2, MobiRadio, Billboard Mobile Channel,
MobiTV, Live TV, and MobiTV en Español.
1.
In Idle mode, press Menu ➔ AT&T Music and press the
Select soft key or the
2.
3.
key.
Highlight Music Applications and press the Select soft
key or the
Follow the on-screen instructions.
Community
Press the
Music Applications
After receiving a Warning regarding the large amounts of
data that his application will use, press OK to continue.
4.
Use the Up or Down Navigation key to select a fan site and
press the
4.
The Make-UR-Tones application allows you to create customized
ringtones from full-track songs.
2.
3.
key.
Make-UR-Tones
Select soft key or the
Highlight Community and press the Select soft key or the
key.
Use the Up or Down Navigation key to highlight the video clip
1.
key.
key.
Use the Up or Down Navigation key to select a site and
press the
key to make your selection.
a687 Crunch.book Page 99 Tuesday, February 23, 2010 6:20 PM
Section 15: AT&T GPS
AT&T GPS provides you with access to real-time GPS-driven
applications. These programs not only allow you to achieve
real-time GPS enabled turn-by-turn navigation, but also access
local searches based on a variety of category parameters. You
also have the ability to shop for other GPS applications.
Shopping for GPS Applications
Global GPS turn-by-turn navigation—mapping and Point of
Interest content for three continents, including North America
(U.S., Canada, and Mexico), Western Europe, and China where
wireless coverage is available from AT&T or its roaming
providers.
AllSport GPS
AT&T GPS is a folder on the phone where you can either
purchase GPS applications or find preloaded GPS applications.
AT&T Navigator is a separately licensed product that requires you
to download the feature to your handset, and accept the license
agreement before using.
Important!: You must have a data plan to use this feature.
1.
Press Menu ➔ AT&T GPS ➔ Shop GPS Apps.
2.
Follow the on-screen prompts to purchase additional GPS
Applications.
This application allows you monitor your outdoor fitness
activities. You can record distance, time, speed, calories, and
route. You can also view maps and elevation profiles.
You can get more information and application support at:
www.trimbleoutdoors.com.
1.
Press Menu ➔ AT&T GPS ➔ AllSportGPS.
2.
Follow the on-screen instructions.
Loopt
Loopt is a cellphone-based GPS sharing system that allows users
to visualize one another using their cell phones and share
information. Loopt also enables users to explore the world
around them by connecting users with integrated content from
Yelp and other applications.
AT&T GPS
99
a687 Crunch.book Page 100 Tuesday, February 23, 2010 6:20 PM
1.
Press Menu ➔ AT&T GPS ➔ Loopt.
2.
Follow the on-screen instructions.
Launching AT&T Navigator
1.
Press Menu ➔ AT&T GPS ➔ AT&T Navigator.
2.
Read the AT&T Navigator Terms of Use and press YES to
acknowledge the terms of use. Otherwise, press Exit.
3.
Highlight Login and press the Right Navigation key to
launch the application.
4.
Read the Warning disclaimer and press Agree to
5.
You are asked if you would like a brief tour of the AT&T
acknowledge. Otherwise, press Exit.
Navigator features. Highlight Yes for a tour and press the
Right Navigation key.
6.
Press NEXT to continue or press QUIT TOUR to skip the tour.
7.
Continue pressing NEXT until you go through the tour.
8.
Press Done to display the AT&T Navigator main screen.
Using Navigator
1.
Press Menu ➔ AT&T GPS ➔ AT&T Navigator.
2.
Select an option and follow the on-screen instructions to
activate a Navigator feature.
• Drive To: lets you get driving directions from wherever you are to
wherever you’re going. Choices include:
– My Favorites: displays your favorite (marked) GPS navigation sites.
– Recent Places: displays your recently entered locations.
– Address: displays manually entered locations.
– Intersection: used to locate a specific address by using two separate
street addresses to identify an intersection. You can enter intersections
manually by typing or speaking them into the phone.
– City: allows you to enter a city, State and/or Province for navigation.
– Businesses: allows you to enter a business type or name, category, or
location.
– Airports: allows you to enter an airport name either by typing or
speaking it. When Tip displays, press the Right Navigation key and
select Type it or Speak it and press GO. If you pressed Type it, enter
the three letter airport code or name in the field and press GO.
3. Press
to return to Idle mode.
Note: These services require the purchase of a subscription.
100
a687 Crunch.book Page 101 Tuesday, February 23, 2010 6:20 PM
Obtaining Driving Directions
The phone’s built-in GPS hardware allows you to get real-time
driving directions to selected locations or establishments based
on your current location.
Using a Physical Address
1.
Press Menu ➔ AT&T GPS ➔ AT&T Navigator ➔ Drive To ➔
Where
WHERE™ is a downloadable mobile application that uses your
current location (obtained via the built-in GPS) to help you find
places of interest, things to do, and local information while you’re
on the go.
1.
Address.
2.
within seven days then you are charged for the GPS
Highlight Type It or Speak It.
• Type It: requires that you enter the physical address using the
keypad.
• Speak It: enables the voice response unit and translates voice to
text.
3. If typing in the address, highlight the following fields and
Press Menu ➔ AT&T GPS ➔ Where. A seven-day free trial
period is provided with a notice that if you do not cancel
service.
Important!: After the trial period, charges for Where service apply. Contact
your service provider for details.
2.
Press OK to accept the Terms of Service.
use the QWERTY keypad to enter the necessary
3.
Your location automatically calculates.
information:
4.
Press
5.
The following menu icons display in the display:
• Street: used to enter a street address.
• City: to enter the city for the address.
• State/Province or ZIP/Postcode: additional information that can
provide a more detailed search.
4. Follow both the on-screen and audio directions.
to start.
• Weather: allows you to check the local weather.
• News: allows you to check Local News, Top US News, Sports,
Entertainment, Technology, or Strange News.
• Reviews: allows you to see reviews of Restaurants, Clubs, Bars,
Hotels, Bakeries, Spas, etc.
AT&T GPS
101
a687 Crunch.book Page 102 Tuesday, February 23, 2010 6:20 PM
• Movies: allows you to search for local theaters and movies being
shown.
• YP.COM: allows you to search the Yellow Pages.
• My Stuff: allows you to set up My shortcuts and My places.
• Where Wall: allows you to write on the world wide WHERE wall. You
must set up an account first.
• Starbucks: allows you to locate the nearest Starbucks.
• Gas Prices: allows you research gas pricing in your area.
6. Use the navigation keys to select an option and follow the
on-screen prompts.
Note: These services require the purchase of a subscription.
102
a687 Crunch.book Page 103 Tuesday, February 23, 2010 6:20 PM
Section 16: Mobile Web
Your phone is equipped with att.net, your access to the mobile
web. This section explains how to navigate att.net and introduces
you to the basic features.
Accessing the Mobile Web
To access the Mobile Web browser:
䊳
When the Idle screen displays, press Menu ➔ Mobile Web. The
att.net homepage displays.
• Local: The Local page allows you to quickly search for Restaurants,
ATMs, Shopping and other businesses based on your current location.
You can also view Maps & Traffic, Weather, and Movie Times.
• Popular: The Popular page allows you to access news, a social
networking site, web-based email and other content.
Browse the Local, Web and Popular screens using the top
navigation bar. The default is the Web tab.
You can change the way you view the web by checking or
unchecking the Mobile view option in Options ➔ Settings ➔
Mobile view. When the Mobile view option is unchecked, the
web format changes to resemble the web as it displays on your
PC.
Homepage - att.net
When you access the Mobile Web, the att.net homepage
displays.
The main page has 3 tabs:
• Web: Web is the default page. Web allows you to enter a URL, search
the web, manage your shortcuts, and access My Account.
Mobile Web
103
a687 Crunch.book Page 104 Tuesday, February 23, 2010 6:20 PM
Navigating with the Mobile Web
1.
To select an item, press an entry.
2.
To return to the previous page, press Back or press
3.
Press the Options soft key to access the following options:
.
• Home [0]: returns you to the homepage where you
started.
• History: displays a list of the last sites visited. You can
browse to any of these sites by selecting them in your
History list.
• Go to Bookmarks: displays a list of your bookmarked
sites. You can browse to any of these sites by selecting
them in your Bookmarks list.
• Add to Bookmarks: allows you to add a URL to your
bookmark list. This option does not display while at the
home page.
• Reload: reloads the current page.
• Find in Page: allows you to search in the current page.
• Settings: allows you to change the way you view your
web pages by changing these options:
– Load images: allows you to choose whether to load images or not.
– Images quality: allows you to adjust from Low, Medium or High.
– Font size: allows you to set font size: Small, Medium, Large or Extra
Large.
104
– Mobile view: allows you to choose how you view the web: Mobile
Web view or HTML web view.
– Landscape mode: changes your display to landscape.
– Show overview: when checked, desktop view displays zoomed
out after page is loaded. When unchecked, desktop view displays
zoomed in.
– In-line form input: when checked, text is entered in the att.net
text entry boxes. When unchecked, the device’s own text entry screen
displays.
– 24-hour clock: allows you to change between 12-hour and 24hour clock format.
– Set clock: drop-down menu allows you to set your clock.
– Clear Cookies: allows you to delete cookies stored by the sites you
have visited.
• Help: allows you to search for help on using the web.
• Exit: allows you to exit the web and return to the Main
Menu.
Enter a URL
You can access a website quickly by entering the URL. Websites
are optimized for viewing on your phone.
To enter a URL and go to a particular website, follow these steps:
1.
Select the Web tab.
2.
Highlight the URL field and press
3.
Enter the URL using the QWERTY keypad.
.
a687 Crunch.book Page 105 Tuesday, February 23, 2010 6:20 PM
Search the Internet
My Account
To perform an internet search using keywords, follow these
steps:
My Account allows you to manage your account from your
phone’s browser. You can use it to view your minutes, Internet,
and messaging usage. You may also be able to see account
balances, pay your bill, change services, and reset your
voicemail password.
1.
Select the Web tab.
2.
Press the Yahoo Search the Internet field and press
3.
Enter the keyword(s) to search using the QWERTY keypad.
1.
Select the Web tab.
4.
Press OK.
2.
Highlight the My Account link and press
5.
A list of search results displays.
3.
Press one of the following items:
6.
Select a link or press
.
to return.
My Shortcuts
Shortcuts enable you to access web content quickly. You can
customize your Shortcuts.
1.
From the Web page, highlight Add More in the My Shortcuts
section and press
2.
.
Select one of the listed shortcuts to add to your homepage.
Tip: Manage Shortcuts allows you to rearrange and delete Shortcuts.
.
• Usage & Billing: shows current usage, minutes remaining, and
date of next billing cycle.
• Parental Controls: allows you to turn on Content Filters and
Purchase Blocker.
• Privacy Policy: shows where to view Privacy Policy.
• Help: allows you to get help for My Account.
Using Bookmarks
While navigating a website with att.net, you can bookmark a site
to quickly and easily access it at a future time. The URLs (website
addresses) of the bookmarked sites are stored in the Favorites
folder, where you can use the 6-preset favorites and store your
own favorite URLs.
Mobile Web
105
a687 Crunch.book Page 106 Tuesday, February 23, 2010 6:20 PM
Accessing a Website Using Bookmarks
1.
Deleting a Bookmark
When the Idle screen displays, press Menu ➔ Mobile Web,
1.
then press Options ➔ Go to Bookmarks.
2.
Press a bookmark item in the Bookmarks list.
1.
When the Idle screen displays, press Menu ➔ Mobile Web.
2.
Highlight the URL field and press
3.
Enter the URL using the QWERTY keypad.
4.
Press the Options soft key, then select Add to Bookmarks.
5.
Bookmark Added displays at the top of the screen.
6.
When you have finished, press
.
or press Back to return
to the Main Menu.
Editing Bookmarks
From the Bookmarks list, press
bookmark you want to change.
2.
Edit the Name of the bookmark.
3.
Press Save.
106
to the right of the
bookmark you want to delete.
2.
At the Delete? confirmation pop-up, press OK to continue,
or Back to cancel.
Adding Bookmarks
1.
From the Bookmarks list, press
to the right of the
Emptying the Cookies
A cookie is a small file which is placed on your phone by a
website during navigation. In addition to containing some sitespecific information, it can also contain some personal
information (such as a username and password) which can pose
a security risk if not properly managed. You can clear these
cookies from your phone at any time.
1.
When the Idle screen displays, press Menu ➔ Mobile Web.
2.
At the att.net homepage, press Options ➔ Settings.
3.
Press Clear cookies....
4.
Press Yes to confirm and continue, or No to cancel.
5.
The Cookies deleted confirmation displays.
6.
When you have finished, press Back to return to the page
you were at before or press
to exit the web.
a687 Crunch.book Page 107 Tuesday, February 23, 2010 6:20 PM
Using your History
2.
1.
When the Idle screen displays, press Menu ➔ Mobile Web,
then press Options ➔ History.
2.
Press an entry from the list to access the site.
3.
Press Clear to clear the history content.
4.
When you have finished, press Back to return or press
Caution!: The WAPs are pre-configured and can not be altered using this
screen. If you change the settings without first checking with your
service provider, the web browser, MMS, and e-mail features may
not work properly.
3.
to exit from the browser.
Changing the WAP Profiles
Use either MEdia Net, AT&T MMS (MultiMedia Server), or AT&T
IMS profiles to connect the phone to the network.
Using this menu you can create and customize the profile
settings for connecting your phone to the network. These
network settings are required to use the WAP browser or to send
MMS, or Email messages.
Note: Although you can change the active connection, please allow a retailer
or customer service representative to assist you.
1.
Press one of the following profiles:
• MEdia Net
• AT&T MMS
• AT&T IMS
The History list provides you with a list of the most recently
visited websites. These entries are placeholders so you can
return to previously unmarked web pages.
In Idle mode, press Menu ➔ Settings ➔ Applications
To create a new connection profile, press Options ➔ New
and follow the on-screen prompts.
– or –
To edit an existing profile, press a profile from list, scroll to
the desired field, and use the QWERTY keypad to edit the
parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
Settings ➔ Browser Settings ➔ Browser Profiles.
Mobile Web
107
a687 Crunch.book Page 108 Tuesday, February 23, 2010 6:20 PM
• Protocol: set the connection protocol used by the WAP browser:
WAP or HTTP.
• Home URL: enter the URL address of the page to use as your
homepage.
• Gateway Address: (WAP only) enter the gateway address of the
proxy server.
• Proxy Address: (HTTP only) set the proxy server address and port.
• Secure Connection: (WAP only) determines if the connection will
follow a secure protocol.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
• Advanced Settings: allows you to configure some of the IP-specific
information.
– Static IP: specify if you want to manually enter an IP address. Remove
the check mark if you want the server to automatically assign the IP
address.
– Local Phone IP: enter the IP address obtained from the network
operator, if you checked the Static IP option.
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. Remove the check mark if you want the server to
automatically assign the IP address.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
– Traffic Class: select the traffic class.
108
4.
Press OK to exit Advanced Settings.
5.
Press Save to save these settings.
The WAP settings may vary depending on the service provider.
a687 Crunch.book Page 109 Tuesday, February 23, 2010 6:20 PM
Section 17: Tools
Use the AT&T Mall to purchase additional or supplemental
applications (such as camera, camcorder, calendar, and alarm).
Tools
Tools are feature options that allow you to use your handset for a
variety of non-phone related activities. To access any of the tools,
perform the following:
䊳
Press Menu ➔ My Stuff ➔ Tools.
Camera
For more information, refer to “Camera” on page 70.
Voice Recognition
Nuance Voice Recognition software is an advanced speech
recognition software used to activate a wide variety of functions
on your phone. Nuance software automatically voice activates
(up to 1,000 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name
naturally to dial, and use your voice to look up contacts, launch
applications and navigate phone menus.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Voice Recognition.
2.
At the voice prompt, say a command. Following is a list of
Note: This list of voice commands briefly displays.
Say a Command Options
• Call <Name or #>: dials a name or number listed in your contact list.
If multiple numbers exist (i.e. home, work, or other) say the name and
the number type (location).
• Send Message <Name or #>: displays the Create Text Message
screen.
• Lookup <Name>: allows you use a voice command to locate and
display contact information stored in the Contacts list.
• Go To <Menu>: accesses all the features of your phone if they are
activated, such as: Voice mail, Contacts, Ringtones, Calendar, Tasks,
and Browser.
• Check <Item>: lets you check your phone's status in the same report
(Status, Messages, Missed Calls, Time, Signal strength, Network,
Battery, My Phone Number, and Volume).
While the Say a Command screen displays you have two options:
• Tutorial: provides examples of how to use the voice commands.
• Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Audio Modes, Speakerphone, and About.
available commands.
Tools
109
a687 Crunch.book Page 110 Tuesday, February 23, 2010 6:20 PM
If the phone does not recognize your command the Command not
recognized screen displays with two options:
• Tutorial: provides instructions on how to use voice commands.
• Restart: press and try the command options again.
Speak clearly when giving your command. There is no need for
you to speak slowly or with added emphasis. The voice
recognition software has been optimized to understand your
speech in its natural form. If it does not recognize your command
after a few seconds, a voice prompt asks you to repeat the
command. If it does not recognize your command again, the
following message displays “Sorry, no match found,” and voice
recognition turns off.
You must end your current Voice Commands call before you can
make another call using Voice Commands. You can only originate
the first call in a 3-way call using Voice Commands.
Voice Recognition Tips
• Wait for the tone before you speak.
• Speak clearly and at a normal volume.
• There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech, and performs best when
you speak naturally.
• In very noise environments, it may be helpful to use a headset or a
Bluetooth headset.
110
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
When you add or change contacts, the software automatically
reloads and voice-activates the list when you add or modify a
contact.
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time will vary based on the
available memory within the phone.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Record Audio. For
more information, refer to “Record Audio Settings” on
page 49.
2.
To start recording, press
. Record a memo by speaking
into the microphone.
3.
During the recording process you can either press Stop to
stop the recording or Pause to temporarily halt the
recording. Once the audio recording has stopped, the
message is automatically saved.
4.
Once stopped, choose from one of the following options:
a687 Crunch.book Page 111 Tuesday, February 23, 2010 6:20 PM
• Play: allows you to play the memo.
• Record: allows you to save the current memo and begin another
session.
• My voice clips: allows you to listen to your audio clips.
• Record Audio Settings: allows you to set up a recording preset:
Default Name and Recording Time (Limit for MMS, 1 minute, 5
minutes, 10 minutes, 15 minutes, 30 minutes, or 60 minutes).
• Send via: allows you to send your voice clip to other people using
either a message or to a Bluetooth device.
• Set as: allows you to set the current memo as a Call Ringtone, a
Caller Ringtone for a specific entry or an Alarm Tone.
• Delete: allows you to delete the current memo.
• Rename: allows you to rename the audio file.
• Lock/Unlock: allows you to lock/unlock the Audio file. Lock
prevents the audio file from deletion. Unlock allows deletion.
• Bluetooth Visibility: allows you to make the audio file visible to a
Bluetooth device.
• Properties: displays the Name, Size, Format, Forwarding, Creation
Date and Time, and Location of the voice memo.
5. Press
or press
to exit.
Alarms
This feature allows you to set an alarm to ring at a specific time.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Alarms.
The following options display:
• Wake-up Alarm: the alarm rings to wake you up at the specified
time.
• Alarm 1: primary alarm setting.
• Alarm 2: secondary alarm setting.
• Alarm 3: third alarm setting.
• Alarm 4: fourth alarm setting.
• Auto Power-up: the alarm rings even when the phone is turned off.
2. Select an alarm type and press the
key.
– or –
Press Options ➔ Create Alarm.
3.
Set the following options:
• Name: allows you to use a specific name for the alarm. The name
you enter will display on the screen when the alarm activates.
• Alarm Activation: use the Left or Right Navigation key to select On
or Off.
• Alarm Time: use the Left or Right Navigation key to highlight the
minutes or hours field and enter a number using the QWERTY
Tools
111
a687 Crunch.book Page 112 Tuesday, February 23, 2010 6:20 PM
keypad. Highlight am/pm and use the Right Navigation key to
change to am or pm. Press Save to save the new values.
Note: To change the time format, see “Time & Date” on page 37.
• Alarm Type: sets the way in which the alarm sounds when
activated (Melody, Vibration, Vibration then Melody, and Vibration
and Melody).
• Alarm Tone: sets the sound file which is played when the alarm is
activated.
• Alarm Volume: adjusts the alarm’s volume (1 - 7).
• Recurrence: use this option to set the repeating status for the
alarm by placing a checkmark alongside those days you would like
to use for the current alarm. Everyday places a checkmark
alongside all days.
• Snooze: use this option to set a Snooze Duration (Off, 5, 10, 15,
20, or 30 Minutes) and a Snooze Repetition (1, 2, 3, 5, or 10
Times).
4. Press Save to store the alarm details.
Setting Auto Power-up Alarms
You can set the phone to ring the alarm when the time for an
alarm comes, even if the phone is switched off.
1.
2.
3.
Select On and press Save.
Note: If the menu option is set to Off, and the phone is switched off at the
specified time, the alarm does not ring.
4.
Press
to exit.
Turning Off an Alarm
To stop the alarm when it rings press
or any other external
key such as the Volume key, Camera key, Back key, Soft key, or
Send key.
Calendar
The Calendar feature allows you to view the Month, Week, and
Day layout views. It also shows any Missed Alarm Events that
occurred.
To display your calendar:
䊳
Press Menu ➔ My Stuff ➔ Tools ➔ Calendar. The Calendar
displays in the default (Month) view.
Creating a New Event
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Calendar.
Press Menu ➔ My Stuff ➔ Tools ➔ Alarms.
2.
Press Options ➔ Create and press the Right Navigation key.
Highlight Auto Power-up and press the
3.
Select one of the following event types and press the
key.
key:
112
a687 Crunch.book Page 113 Tuesday, February 23, 2010 6:20 PM
• Appointment
• Anniversary
• Holiday
• Important
• Private
Other options for the Calendar include:
• View: allows you to view a specified date.
• View by: allows you to choose between day view or week view.
• Create: allows you to select an event category: Appointment,
Anniversary, Holiday, Important or Private event.
• Go to: allows you to go to your today’s calendar or that of a
specified date.
• Event List: allows you to refer to your scheduled events stored on
your calendar according to the type of event: Appointment,
Anniversary, Holiday, Important or Private event.
• Delete: allows you to delete a calendar event.
• Calendar Settings: this option allows you to configure the
Calendar’s Starting Day and Default View Mode.
• Missed Alarm Events: this option displays any missed events.
• Used Space: this option displays a list of the different Calendar
event categories along with the memory allocation for each.
4. Highlight the Title field and use the QWERTY keypad to
enter a name for this specific event (up to 15 characters).
5.
Select the Details field and enter a description for this
event (up to 100 characters).
6.
Highlight the Start Date field and enter a date for this event
to begin.
7.
Select the Start Time field and enter a time for this event to
begin. Use the Right Navigation key to set am or pm.
8.
Highlight the End Date field and enter a date for this event
to end.
9.
Select the End Time field and enter a time for this event to
end.
10. Highlight the Location field and enter a location description
for this event (up to 15 characters).
11. Highlight the Alarm check box and press Check. Once
selected, all remaining alarm settings are enabled.
12. Highlight the Repeat check box and press Check then scroll
to the next field and use the Left or Right Navigation key to
select the number of repetitions for this alarm (Daily,
Weekly, or Monthly).
13. Select the Every field and enter the number of times you
want this alarm to repeat.
Tools
113
a687 Crunch.book Page 114 Tuesday, February 23, 2010 6:20 PM
14. Highlight the Except weekends checkbox and press Check
3.
to exempt non-work days (weekends) from the event
notification.
15. Select the Until field and assign an expiration date for this
event.
16. Press Save to store the new event.
Press Menu ➔ My Stuff ➔ Tools ➔ Calendar ➔ Options ➔
Event List.
2.
Press the Right Navigation key and select an event type,
then press the
3.
2.
key.
5.
Press Back or press
key.
to exit.
The phone stores the numbers of the calls you’ve missed, made,
or received in the Recent Calls menu. If the number or caller is
listed in your Address Book, the associated name displays.
Tasks
This menu option allows you to create a “to do” entry of tasks
which are created in a similar fashion to previously described
Calendar entries.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Tasks.
Press Back or press
2.
Press Options ➔ Create.
3.
Enter the information into the following fields and press
to exit.
Press Menu ➔ My Stuff ➔ Tools ➔ Calendar ➔ Options ➔
Save:
Event List.
• Title: enter a title for this task (up to 15 characters).
• Details: enter a detailed description for this task (up to 100
characters).
• Start Date: enter a date for this task to begin.
• Due Date: enter a date for this task to end.
Press the Right Navigation key and select an event type,
then press the
key.
The events in the selected category display.
114
Select Selected, Multiple, or all and press the
The events in the selected category display.
Deleting an Event
1.
4.
Recent Calls
Viewing an Event
1.
Highlight an event to delete and press Options ➔ Delete
and press the Right Navigation key.
a687 Crunch.book Page 115 Tuesday, February 23, 2010 6:20 PM
• Alarm: allows you to trigger an alarm for this task. Press Check to
select this option.
• Alarm Date: enter a date for this alarm (format is MM/DD/YYYY).
• Alarm Time: enter a time for this alarm to sound. Press Save to
assign the new time.
• Alarm Tone: allows you to choose an alarm tone. Once selected,
navigate to Tones, select a file, and press Select to assign the audio
file as the current alarm tone.
• Priority: allows you assign the task a priority (1-high, 2-medium, or
3-low).
4. Press Save to store the new task.
Notes
This option allows you to create memos to add to your events.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Notes.
2.
Press Options ➔ Create.
3.
Use the keypad to enter a new note and press Save.
Calculator
With this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication, and division.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Calculator.
2.
Enter the first number using the QWERTY keypad.
3.
Enter the operation for your calculation by using the
Navigation keys to select the arithmetic function.
4.
Enter the second number.
5.
To view the result, press
.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Tip Calculator.
2.
Highlight the Bill field and use the keypad to enter the total
amount of the bill.
3.
Select the Tip (%) field and use the keypad to change the
tip percentage.
4.
Enter the number of people splitting the bill in the # paying
field.
5.
The amount of the Tip ($) and You pay displays.
6.
Press Reset to clear the fields and start over.
Tools
115
a687 Crunch.book Page 116 Tuesday, February 23, 2010 6:20 PM
Converter
Your phone comes with a built-in conversion application. This
conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
1. Press Menu ➔ My Stuff ➔ Tools ➔ Converter.
2.
Select the specific converter function and press the
key.
• Each converter function has a field for the type of unit to convert,
and the type of unit to convert to. An additional field allows you to
input the unit amount to convert.
3. Press the Right Navigation key to select the desired Unit.
4.
Highlight the field below the Unit and enter the value you
6.
The resulting converted values (“to”) automatically displays below the
7.
Press Back or press
second Unit field.
World Clock
World Clock allows you to view the time of day or night in other
parts of the world. World displays time in the 100 different cities,
within all 24 time zones around the world. The time in your time
zone is automatically displayed.
To add another time zone:
1.
Press Menu ➔ My Stuff ➔ Tools ➔ World Clock.
2.
Press Options ➔ Add.
3.
Press the Left or Right Navigation key until you locate the
desired global region.
Important!: Time zones display in Greenwich Mean Time (GMT).
4.
are converting From.
5.
Highlight the Unit you are converting to and press the Right
Navigation key to select the desired Unit.
116
to exit.
Highlight Daylight Saving and press the
applicable).
5.
Press Save to set the time.
key (if
a687 Crunch.book Page 117 Tuesday, February 23, 2010 6:20 PM
Deleting a World Clock Entry
Stopwatch
1.
Press Menu ➔ My Stuff ➔ Tools ➔ World Clock.
2.
Press Options ➔ Delete.
1.
Press Menu ➔ My Stuff ➔ Tools ➔ Stopwatch
3.
At the Delete? prompt, press Yes to delete or No to cancel.
2.
Press Start to start the lap counter.
Timer
3.
You can use this menu to set a countdown timer. Use a timer to
count down to an event based on a preset time length (hours,
minutes, and seconds).
1.
2.
You can use this menu to measure intervals of time.
Press Stop to stop the stopwatch and press Lap to mark a
unit of time per lap. You can record multiple lap times.
4.
Press Reset to erase all times recorded.
Press Menu ➔ My Stuff ➔ Tools ➔ Timer.
Press Set and use the keypad to enter a countdown time
length for the alert by setting the Hours, Minutes, and
Seconds value then press the OK soft key.
3.
Press the
key to begin the timer.
4.
Press the
key twice to pause the timer.
Tools
117
a687 Crunch.book Page 118 Tuesday, February 23, 2010 6:20 PM
Section 18: Accessibility
TTY Settings
TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf or
hard of hearing, or who have speech or language disabilities, to
communicate via a telephone. This phone comes TTY-ready and
only requires the insertion of the TTY device to enable this
feature.
Use the following steps to access the TTY settings:
䊳
Inserting a TTY connector into the Headset/Adapter jack (on
the left side of the phone) enables this function.
For additional technical support you may access the following
website or call 1-888-987-4357.
http://www.samsungtelecom.com/contact_us/accessibility.asp
118
a687 Crunch.book Page 119 Tuesday, February 23, 2010 6:20 PM
Section 19: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
Health and Safety Information
119
a687 Crunch.book Page 120 Tuesday, February 23, 2010 6:20 PM
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
GSM 850:
• Head: 0.58 W/Kg.
• Body-worn: 1.1 W/Kg.
GSM 1900:
• Head: 0.55 W/Kg.
• Body-worn: 0.77 W/Kg.
UMTS V:
• Head: 0.51 W/Kg.
• Body-worn: 0.49 W/Kg.
UMTS II:
• Head: 1.03 W/Kg.
• Body-worn: 1.07 W/Kg.
120
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Please Note the Following Information When
Using Your Handset
1.
WARNING REGARDING DISPLAY
The display on your handset is made of glass or acrylic and
could break if your handset is dropped or if it receives
significant impact. Do not use if screen is broken or
cracked as this could cause injury to you.
a687 Crunch.book Page 121 Tuesday, February 23, 2010 6:20 PM
2.
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH SCREEN
HANDSET
If your handset has a touch-screen display, please note
that a touch-screen responds best to a light touch from the
pad of your finger or a non-metallic stylus. Using excessive
force or a metallic object when pressing on the touchscreen may damage the tempered glass surface and void
the warranty. For more information, refer to “Standard
Limited Warranty” on page 139.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: http://mobile.samsungusa.com/recycling/index.jsp or call
1-800-822-8837 for more information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
Health and Safety Information
121
a687 Crunch.book Page 122 Tuesday, February 23, 2010 6:20 PM
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
122
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user.
In such a case, FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to repair, replace
or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
a687 Crunch.book Page 123 Tuesday, February 23, 2010 6:20 PM
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
Health and Safety Information
123
a687 Crunch.book Page 124 Tuesday, February 23, 2010 6:20 PM
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
124
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
a687 Crunch.book Page 125 Tuesday, February 23, 2010 6:20 PM
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a
wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was
strictly precautionary; it was not based on scientific evidence that
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
Health and Safety Information
125
a687 Crunch.book Page 126 Tuesday, February 23, 2010 6:20 PM
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
126
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
a687 Crunch.book Page 127 Tuesday, February 23, 2010 6:20 PM
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/
• World Health Organization (WHO):
http://www.who.int/peh-emf/en
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Health Protection Agency:
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
HomeBusinessandEntertainment/CellPhones/default.htm
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3.
Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
Health and Safety Information
127
a687 Crunch.book Page 128 Tuesday, February 23, 2010 6:20 PM
4.
5.
Let the person you are speaking with know you are driving;
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
traffic can be hazardous.
other local emergency number, as you would want others
Do not take notes or look up phone numbers while driving.
wireless assistance number when necessary. If you see a
responsibility, driving safely.
broken-down vehicle posing no serious hazard, a broken
Dial sensibly and assess the traffic; if possible, place calls
traffic signal, a minor traffic accident where no one
when you are not moving or before pulling into traffic. Try
displays injured, or a vehicle you know to be stolen, call
to plan calls when your car will be stationary. If you need to
roadside assistance or other special non-emergency
make a call while moving, dial only a few numbers, check
number.
Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
8.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
128
to do for you.
10. Call roadside assistance or a special non-emergency
book takes attention away from your primary
the road and your mirrors, then continue.
7.
Use your wireless phone to help others in emergencies. If
weather conditions. Rain, sleet, snow, ice and even heavy
Jotting down a "to do" list or flipping through your address
6.
9.
if necessary, suspend the call in heavy traffic or hazardous
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
a687 Crunch.book Page 129 Tuesday, February 23, 2010 6:20 PM
Responsible Listening
• Set the volume in a quiet environment and select the lowest volume at
Caution!: Avoid potential hearing loss.
• When using headphones, turn the volume down if you cannot hear the
which you can hear adequately.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You should follow some commonsense recommendations when
using any portable audio device:
Health and Safety Information
129
a687 Crunch.book Page 130 Tuesday, February 23, 2010 6:20 PM
You can obtain additional information on this subject from the
following sources:
National Institute for Occupational Safety and Health (NIOSH)
American Academy of Audiology
Suite 9200
11730 Plaza American Drive, Suite 300
Patriots Plaza Building
Reston, VA 20190
Washington, DC 20201
Voice: (800) 222-2336
Voice: 1-800-35-NIOSH (1-800-356-4647)
Email: info@audiology.org
1-800-CDC-INFO (1-800-232-4636)
Internet: http://www.audiology.org
Outside the U.S. 513-533-8328
National Institute on Deafness and Other Communication Disorders
Email: cdcinfo@cdc.gov
National Institutes of Health
Internet: http://www.cdc.gov
31 Center Drive, MSC 2320
1-888-232-6348 TTY
Bethesda, MD 20892-2320
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
395 E Street, S.W.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
130
a687 Crunch.book Page 131 Tuesday, February 23, 2010 6:20 PM
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Health and Safety Information
131
a687 Crunch.book Page 132 Tuesday, February 23, 2010 6:20 PM
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
132
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
a687 Crunch.book Page 133 Tuesday, February 23, 2010 6:20 PM
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Health and Safety Information
133
a687 Crunch.book Page 134 Tuesday, February 23, 2010 6:20 PM
To make an emergency call:
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
134
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
a687 Crunch.book Page 135 Tuesday, February 23, 2010 6:20 PM
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Health and Safety Information
135
a687 Crunch.book Page 136 Tuesday, February 23, 2010 6:20 PM
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to “Activation” on page 44.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
136
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
a687 Crunch.book Page 137 Tuesday, February 23, 2010 6:20 PM
• Battery charging time depends on the remaining battery charge and
• Do not leave the battery in hot or cold places, such as in a car in
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
display to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
Health and Safety Information
137
a687 Crunch.book Page 138 Tuesday, February 23, 2010 6:20 PM
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
138
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
a687 Crunch.book Page 139 Tuesday, February 23, 2010 6:20 PM
Section 20: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
139
a687 Crunch.book Page 140 Tuesday, February 23, 2010 6:20 PM
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
140
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
a687 Crunch.book Page 141 Tuesday, February 23, 2010 6:20 PM
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
141
a687 Crunch.book Page 142 Tuesday, February 23, 2010 6:20 PM
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
142
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
a687 Crunch.book Page 143 Tuesday, February 23, 2010 6:20 PM
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
Warranty Information
143
a687 Crunch.book Page 144 Tuesday, February 23, 2010 6:20 PM
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
144
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
a687 Crunch.book Page 145 Tuesday, February 23, 2010 6:20 PM
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only displays to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2010 Samsung Telecommunications
America. All rights
reserved.
Warranty Information
145
a687 Crunch.book Page 146 Tuesday, February 23, 2010 6:20 PM
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
146
a687 Crunch.book Page 147 Tuesday, February 23, 2010 6:20 PM
Index
A
Accessing a Menu Function 16
Accessing AT&T Music 89
Adding a New Contact
Adding More Fields 54
Deleting Fields 54
During a Call 54
Idle Screen 53
Address Book
Adding a New Contact 53
Adding Pauses to Contact Numbers
55
Address Book Entry Options 56
Checking the Used Space 61
Copying an entry to the Phone 60
Copying Entry to Phone 60
Copying Entry to SIM Card 60
Deleting an Address Book entry 60
Dialing a Number 55
FDN (Fixed Dialing Number) Mode
57
Finding an Address Book Entry 55
Group Settings 58
Managing Address Book Entries 59
Own Phone Number 57
Service Dialing Numbers 59
Using Contacts List 55
Address Book Settings 52
AIM 83
Alarms 111
setting up auto power-up alarm 112
AllSport GPS 84 99
AnswerTones 88
AOL 83
AppCenter 87
AnswerTones 88
Cool Tools/Apps 87
Games 87
MEdia Net Home 88
Options 88
Ringtones 87
Themes 88
Videos 87
Application Settings
Calendar 50
Reset 41
,
Applications 84
Alarms 111
Calculator 115
Calendar 112
Converter 116
Memo 115
Record Audio 110
Stopwatch 117
Tasks 114
Timer 117
Tools 109
Using the Camcorder 73
Using the Camera 70
World Clock 116
AT&T GPS
Navigator 100
AT&T Music 89
Accessing Music Videos 97
Adding Music to your Handset 89
Community 98
Music Apps 98
Music Player 89
147
a687 Crunch.book Page 148 Tuesday, February 23, 2010 6:20 PM
Playing Music Through a Stereo
Bluetooth Device 91
Playing Music Transferred from the
Handset 90
Playing Music while Using the Phone
91
Playlists 92
Shop Music 94
Transferring Music From the Digital
Music Stores 95
Transferring Music Windows Media
Player 95
Using XM Radio 97
AT&T Navigator 84
AT&T Social Net 85
AT&T Yahoo! 83
Audio 64
B
Battery
charging 7
Installing 6
Low Battery Indicator 8
Bluetooth 44
Activation 44
Discoverable mode 44
148
My Bluetooth Info 45
My Devices 45
Bluetooth Device
Stereo 91
Browser
Settings 107
Business Card
attaching to a message 79
C
Calendar 112
Deleting an Event 114
Viewing an Event 114
Call Functions 20
3-Way Calling (Multi-Party Calling)
28
Address Book 21
Answering a Call 22
Call Time 27
Call Waiting 28
Correcting the Number 20
Data Volume 27
Deleting Missed Call 27
Dialing a Recent Number 21
Ending a Call 21
International Call 20
Making a Call 20
Manual Pause Dialing 20
Recent Calls 25
Saving the Missed Call Number to
Address Book 26
Searching for a Number in Address
Book 24
Send Message to Missed Call 27
Using the Speakerphone 24
Viewing All Calls 26
Viewing Missed Calls 26
Camcorder 73
Accessing the Video Folder 75
Shooting Video 73
Camcorder Options 74
Camcorder Options after a Video is
Taken 75
Camera
Accessing the Pictures Folder 72
Camera Options 71
Picture Folder 72
Taking Pictures 70
Camera Options
Timer 71 74
Changing Your Settings 29
,
a687 Crunch.book Page 149 Tuesday, February 23, 2010 6:20 PM
Charging battery 7
Clear Phone Memory 50
Connectivity
Configuring Your Network Profiles
47
F
FDN
Changing the Status 57
Creating New Numbers 57
G
Cookies
Emptying 106
Cool Tools/Apps 87
D
Dialing Display
Background Color 37
Font Color 36
Font Size 36
Font Type 36
Digital Music Stores 95
Display
icons 13
Light Settings 36
Menu Style 36
Wallpaper 36
E
Entering Text 18
Changing the Text Entry Mode 19
Using Fn 123 (numeric) Mode 19
Using SYm (symbol) Mode 19
Games 87
Getting Started 5
Setting Up Your Phone 5
Voice mail 9
GPS Applications 99
Shopping For 99
Graphics 87
Group
Adding an Entry 58
Creating New Group 58
Removing an Entry 58
Renaming a group 59
H
HAC 131
Health and Safety Information 119
I
Icons, description 13
IMS Settings 48
International Call 20
L
Light Settings
Backlight Time 36
Brightness 36
Locking and Unlocking the Screen 9
Loopt 85 99
,
M
Main Display Settings
Dialing Display 36
Greeting Message 37
Menu Style 36
Wallpaper 36
Make-UR-Tones 85 98
MEdia Net and WAP
Changing WAP Profiles 107
Memory
Used Space 82
Memory Card Installation 6
Memory Management 50
Clear Phone Memory 50
Used Space 51
Menu Navigation 16
Menu Navigations
Using Shortcut Numbers 17
,
149
a687 Crunch.book Page 150 Tuesday, February 23, 2010 6:20 PM
Messaging
Creating and Sending Text
Messages 78
Settings 81
Signing into Your Mobile Email 83
Types of Messages 78
Using Message Options 80
microSD card
Installing 6
Mobile Banking 85
Mobile Email 85
AIM 83
AOL 83
AT&T Yahoo! 83
Windows Live Mail 83
Mobile Video
Adding a Video Alert 77
Customizing 76
My Purchases 77
Updating Favorites 76
Video Categories 76
Mobile Web
Entering Text in the Mobile Web
Browser 104
Navigating with the Mobile Web 104
150
Using Bookmarks 105
MobiTV 85
MobiVJ 85
M-Ratings 132
Multitasking 91
Music 65
Music File Extensions
3GP 89
AAC 89
AAC+ 89
eAAC+ 89
M4A 89
MP3 89
MP4 89
MPEG 89
WMA 89
Music Player
Settings 49
Music Videos
Viewing a Video Clip 98
MusicID 2 85
Mute 24
My Stuff
Audio 64
Games 65
Music 65
Other Files 68
Pictures 66
Recorded Audio 65
Ringback Tones 65
Shop Applications 86
Tones 64
Used Space 68
Videos 68
My-Cast Weather 85
N
Network Profile
Configuration 47
Network Selection 47
O
Online Locker 67
P
Phone
Front View 10
icons 13
Own Number 38
Rear View 12
Shortcuts 38
Side View 12
Switching On/Off 8
a687 Crunch.book Page 151 Tuesday, February 23, 2010 6:20 PM
Phone Information 51
Phone Safety 130
Phone Settings 37
Playlists
Adding songs to a Playlist 92
Creating a Playlist 92
Importing a Playlist from Windows
Media Player 93
Removing songs from a Playlist 93
Powering
Off 8
On 8
Q
QWERTY Keypad 18
R
Recent Calls 114
Recorded Audio 65
Creating 65
RingbackTones 65
Ringtones 87
S
SAR values 119
Security 39
APN Control 41
Change Phone Password 41
Change PIN Code 41
Change PIN2 Code 41
Check PIN Code 40
Lock Phone 39
Lock SIM Card 39
Set FDN Mode 40
Service Dialing Numbers 59
Set FDN Mode 40
Settings
Address Book 52
Applications 48
Call Settings 43
Display 36
Music Player 49
Phone 37
Phone Information 51
Record Audio 49
Software Update 51
Sound 29
Time & Date 37
Video Share 49
Shortcuts 17
SIM card
installation 5
Installing 5
Speakerphone Key 24
Standard Limited Warranty
139
T
T-Coil 15
T-Coil Mode 42
Themes 88
Tip Calculator 115
Tones 64
Tools
Alarms 111
Calculator 115
Calendar 112
Camera 70
Converter 116
Memo 115
Notes 115
Recent Calls 114
Record Audio 110
Stopwatch 117
Tasks 114
Timer 117
World Clock 116
T-Ratings 132
151
a687 Crunch.book Page 152 Tuesday, February 23, 2010 6:20 PM
Travel Adapter 7
Using 7
TTY Settings 118
,
U
UL Certification 121
Understanding Your Phone 10
Features of Your Phone 10
Front View 10
Rear View 12
Side Views 12
Used Space 61 68 82
Using Bookmarks
Accessing a Website Using
Bookmarks 106
Adding Bookmarks 106
Deleting a Bookmark 106
Editing Bookmarks 106
, ,
V
Video Categories
Viewing a Video Clip 76
Video Features 76
Video Share 24
IMS Settings 48
Initiating and Receiving a Video
Share Session 25
152
Play a Recording 25
Settings 49
Videos 68 87
Voice Mail
Accessing 9
From Another Phone 9
Setup 9
Voice Recognition 109
W
Warranty Information 139
Where 85 101
WikiMobile 85
Windows Live Hotmail 83
World Clock 116
Deleting an Entry 117
,
X
XM Radio 85
Y
Yellowpages 85
Yellowpages Mobile 62