Samsung FE-R500 User manual

SCH-r500 Series
P O R T A B L E
M O B I L E
Q U A D - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein Rd.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2008 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungwireless.com/support
GH68-18317
r500.07_BD09_CB_042608_F2
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSDTM and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started .............................................. 4
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Section 2: Understanding Your Phone ...........................9
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Open View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . 10
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Section 3: Call Functions ............................................. 18
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 18
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 19
Making a Call — Quick Search Dialing . . . . . . . . . . . . . . . . . . 20
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 20
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Ignoring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Section 4: Menu Navigation ......................................... 28
1
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Navigate Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Section 5: Entering Text ............................................... 30
Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Entering Text in Alpha (Abc) Mode . . . . . . . . . . . . . . . . . . . . . 31
Entering Text in T9 Word Mode . . . . . . . . . . . . . . . . . . . . . . . 31
Entering Upper and Lower Case Letters . . . . . . . . . . . . . . . . . 32
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Section 6: Understanding Your Contacts .................... 34
Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 34
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 40
Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Renaming a Contacts Group . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Section 7: Messaging ................................................... 46
Accessing Your Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 46
Message Send Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Section 8: Browser ....................................................... 57
Section 12: Tools/Utilities ............................................ 90
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Browser Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57
57
57
58
58
Section 9: Brew ............................................................ 59
Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Section 10: Camera ...................................................... 60
Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Video Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Point, Click, and Send Pictures and Videos . . . . . . . . . . . . . . .
60
63
65
65
72
77
77
77
78
79
Section 11: Multimedia ................................................ 81
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Tools/Utilities Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Section 13: Voice SVC ................................................ 103
Launching Voice SVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Voice Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Section 14: Changing Your Settings .......................... 108
Accessing Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108
108
108
111
113
115
122
2
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Section 15: Health and Safety Information ...............127
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 127
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 128
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 129
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Using Your Phone Near Other Electronic Devices . . . . . . . . . 138
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless
Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 140
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 142
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 143
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 143
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Section 16: Warranty Information ............................. 146
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Index ............................................................................150
3
Section 1: Getting Started
This section explains how to start using your Samsung r500
phone by getting an understanding of how this manual is put
together, activating your service, and setting up your voice mail.
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 150.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 127.
Notes and Tips
Throughout this guide are icons and text that are set apart from
the rest. These are intended to point out important information,
quick methods for activating features, to define terms, and more.
The definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu,
or sub menu.
• Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight Use the Navigation key (
) to move a highlighting
effect onto a menu item or screen item of interest.
select
➔
After “highlighting” a menu item or screen item,
press the MENU / OK key ( ) to launch, access, or
save a highlighted menu item or screen field of
interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings ➔ Call Settings ➔ Voice Call...”
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Getting Started
4
Install the Battery
Turn Your Phone On
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and a travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1.
1.
Open the flip on your phone, as shown.
2.
Press the
key.
Note: As with any other radio-transmitting device, do not
touch the antenna while using your phone as this
can affect call quality and can cause the phone to
operate at a higher power level than is necessary.
Insert the top end (1) of the
Press
• The phone begins searching for a network
signal.
• Once the phone finds a signal, the time, date
and day appear at the top of the display.
You’re now ready to place and receive calls.
battery first, matching the
gold contacts on the top end
of the battery to those inside
of the phone.
2.
Press the bottom end of the battery (2) down into the
Note: If you are outside of your carrier’s coverage or roaming area ( ),
the No Service icon (
) appears at the top of the phone’s display. If
you cannot place or receive calls, try later when service is available, or
at another location.
phone.
3.
Place the battery cover over the
4
battery and slide the cover
upward into place (3) and press
the bottom down (4) until it
clicks.
3
Turn Your Phone Off
1.
Press and hold the
key for two or more seconds. Your
phone powers off.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
5
Remove the Battery
Use the Travel Adapter
Important!: You must unplug the Travel Adapter (if it is connected) before
removing the battery from the phone during charging to avoid
damage.
1.
Press and hold the
key to
turn off the phone (if on).
2.
The travel adapter included with
your phone is a convenient, lightweight charger that rapidly
charges your phone from any
120/220 VAC outlet.
1.
Move the cover latch (1)
Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
toward the bottom end of the
phone.
3.
Lift the cover (2) up and away from the phone, bottom end
Note: For connection to an electrical supply not located in North America, you
must use an adapter of the proper configuration for the power outlet.
Use of the wrong adapter could damage your phone and void your
warranty.
first.
4.
2.
Lift the battery up (3) and
3
away (4) from the phone,
bottom end first.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the left side of your
phone.
4
+
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life.
Using other accessories may invalidate your warranty and may
cause damage.
Getting Started
6
Note: With the device turned OFF, a discharged battery recharges fully in
approximately 4 hours.
2.
Follow the prompts in the new user tutorial to setup your
voice mail box.
Listen to Voicemail
Low Battery Indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Three bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate
you have two to three minutes before the battery is too low to operate
the phone.
If you continue to use your phone without charging its battery, the
phone shuts down.
Setting Up Your Voicemail
Voice mail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your voice mail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your voice mail box.
1.
In standby mode, press and hold the
you will hear your voice greeting.
2.
Interrupt your greeting by pressing
In standby mode, press and hold the
own mobile number to dial Voicemail.
7
key or dial your
+
.
You are then prompted to enter your password.
3.
Enter your password and follow the prompts to listen to
your voice mail.
Memory Card (Optional)
Your phone has a memory card slot on its right side, above the
Camera key. You can install a microSD™ card in this slot to
provide additional memory for storing files (such as, sound files
and photos) in your phone.
Install a Memory Card
1.
Open the microSD cover on the right side of your phone
(above the Camera key).
1.
key or dial your
own mobile number to dial voice mail. After connecting,
2.
Insert the memory card — label side facing down and
4.
smaller end pointing toward the phone — into the memory
def
ND
mno
3.
wxyz
card slot.
If desired, install another memory card. (For more
information, refer to “Install a Memory Card” on page 7.)
5.
Replace the microSD cover.
Press the memory card up into the slot until the card locks
into place.
4.
Replace the microSD cover.
Remove a Memory Card
1.
Open the microSD cover on the right side of your phone
(above the Camera key).
2.
Press the memory card up into the slot until the card lock
releases.
3.
Remove the memory card from the memory card slot.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.
Closed View of Your Phone
1
Features of Your Phone
2
• Domestic and international voice and text messaging service (available
3
on participating networks).
• High speed data (CDMA 1x EVDO Technology)
6
7
4
• Global Positioning (GPS) Technology
5
• Personal Information Management (PIM) functions (Calendar,
Calculator, and so on)
• Picture/Video (MMS) Messaging
• Text (SMS) Messaging
• 1.3 Mega pixel Camera with Camcorder function
• Advanced Music Player (MP3 compatible)
• Advanced Speech Recognition
• Speakerphone
• microSDTM Memory Card slot
• Bluetooth® Wireless Technology (see Note)
Note: The r500 phone supports the wireless headset, handsfree, object push
and file transfer for Bluetooth® wireless technology. The r500 phone
does not support Bluetooth OBEX or file transfer profiles.
9
Features
1.
Camera Lens — The lens of your built-in camera.
2.
Power/Accessory Connector — Used to connect
charging accessories and any available accessory cables
to your phone. Lets you plug in an optional headset for
safe, convenient, hands-free conversation.
3.
Mirror — Used to center the image when taking self-
Front Open View of Your Phone
portraits.
4.
1
Volume Keys — With the phone closed and idle, turns on
the front display backlight when pressed.
When receiving a call, mutes the ringer.
2
When playing music, adjusts the Media Player volume.
5.
Front Display — Indicates the status of your phone,
17
including status icons, message indicators, signal
strength, and so on. Shows time and date.
6.
3
4
5
6
7
Camera/Media Player Key — With the flip closed and the
phone idle, turns on the front display backlight when
pressed.
With the flip closed, the phone idle, and with a memory
card containing music files inserted, launches the Media
Player when pressed and held.
7.
16
15
14
13
12
11
10
Memory Card Socket — Used to plug in a microSD
8
9
memory card for additional multimedia file storage.
Features
1.
Earpiece — Lets you hear the other caller.
Understanding Your Phone
10
2.
Main Display — Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on. Shows menus, calls, and messages.
3.
4.
6.
7.
are in text entry mode. Press this key to return to the
menu options.
previous menu or screen when navigating features on your
Left Soft Key — Used to navigate through menus and
the power goes On or Off. When you receive an incoming
Speakerphone Key — Turns Speakerphone mode On and
call, press to send the call to voicemail.
Off.
13. Voice Recognition Key — Launches VoiceSignal options.
Volume Keys — With the phone open and idle, adjusts the
14. Camera/Media Player Key — With the flip open,
call ringer volume when pressed.
launches the Camera in your phone.
When receiving a call, mutes the ringer.
When in Camera or Camcorder mode, switches between
SEND Key — Lets you place or receive a call. In standby
Microphone — Lets the other caller hear you clearly when
you are speaking to them.
9.
phone.
12. END Key — Ends a call. If you press and hold the END key,
Soft key option.
mode, press the key once to access the recent call log.
8.
letters, and characters.
11. CLR Key — Deletes characters from the display when you
Navigation Key — Lets you scroll through the phone
applications and to select the choice available in the Left
5.
10. Alphanumeric Keys — Use these keys to enter numbers,
Special Function Keys — Enter special characters.
Perform various functions.
Camera and Camcorder.
15. MENU/OK Key — In idle mode, launches the Main Menu.
When navigating through a menu, accepts the highlighted
choice in the menu.
16. Right Soft Key — Used to navigate through menus and
applications and to select the choice available in the Right
Soft key option.
11
17. Stereo Speakers — Enabled by Speakerphone key or
Media Player for handsfree operation or to play music.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the left soft key
(
) and the right soft key (
).
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press Settings to access the Settings menu. (For
more information, refer to “Changing Your Settings” on page 108.)
• When the left soft key function is Edit, press the Edit (left) soft key
(
) to edit a Contact.
• When the left soft key function is Erase, press the Erase (left) soft key
(
) and a pop-up window appears prompting you to confirm the
erasure.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the Contacts (right) soft key (
) to open
the Messages menu.
• When the right soft key function is Options, press the Options (right)
soft key (
) and a pop-up menu appears.
MENU/OK Key
• In standby mode, press the MENU/OK key (
) to open the main
menu.
• In a menu, press the MENU/OK key (
) to accept the highlighted
selection.
• In camera mode, press the MENU/OK key (
) to take a photo or to
create a Pic message.
• When the MENU/OK key function is Edit, press the EDIT key (
) to
edit a Draft message.
Speakerphone Key
In standby mode or during a call, pressing and holding the
Speakerphone key (
) places your phone in speakerphone
mode, allowing you to use your phone handsfree and/or to
include other nearby persons in a call. (For more information,
refer to “Responsible Listening” on page 136.)
In speakerphone mode, pressing and holding the Speakerphone
key (
) disables speakerphone mode.
Voice Recognition Key
In standby mode, pressing the Voice Recognition key (
),
launches the VoiceSignal application, enabling you to use spoken
commands to control your phone. (For more information, refer to
“Voice SVC” on page 103.)
Understanding Your Phone
12
CLR Key
SEND Key
The CLR key ( CLR ) is used to erase or clear numbers, text, or
symbols from the display. You can also use the CLR key to
return to a previous menu or to return to standby mode from any
menu.
1.
If you enter an incorrect character, briefly press
CLR
to
backspace (and delete) the character.
2.
To erase the entire sentence, press and hold
3.
To back up one menu level, briefly press
4.
To return to standby mode, press and hold
CLR
CLR
CLR
Press
until you
) to
once to disconnect a call.
to return to standby mode from any menu, or to
cancel the last input.
4.
With your phone turned off, press
on.
13
once to answer calls.
3.
Briefly press
to make a call.
in standby mode to display a list of
recent calls to and from your phone.
Press
twice in standby mode to call the most recent
number.
turn your phone off.
3.
Enter a number and briefly press
5.
Press
to pick up a waiting call. Press
again to
switch back to the other call.
In standby mode, press and hold the END key (
Briefly press
Press
2.
4.
.
END Key
2.
1.
.
return to standby mode.
1.
The SEND key (
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
to turn your phone
Navigation Key
Use the directional keys on the Navigation key (
) to
browse menus, sub-menus, and lists. In standby mode, the
directional keys also act as shortcuts to launch applications.
Camera Key
In standby mode, press and hold the Camera key (
)—
located on the right side of your phone — to activate the camera
built into your phone.
With the camera or camcorder active, pressing and holding the
Camera key (
) switches between the camera and
camcorder functions.
Understanding the Display Screen
1.
The top line of your
Dialogue Boxes
2
battery power, signal
strength, connection type,
and more.
The center portion of the
3
main display shows
information such as call progress information, messages,
and photos.
The bottom line of the main display shows current soft key
functions. The sample screen shows that pressing the Left
soft key (
) will launch the Settings menu, pressing
) will display the Main Menu, and
pressing the Right soft key (
Contacts menu.
), then select
the icons that can appear on the top line of the display.
indicate network status,
the MENU key (
In standby mode, press the MENU/OK key (
Settings ➔ Phone Info ➔ Icon Glossary. A list shows of
contains icons that
3.
Your The r500 phone can show you definitions of the icons that
appear on the top lines of the front and main displays. To access
the Icon Glossary:
䊳
1
phone’s main display
2.
Display Screen Icons
) will show the
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low memory. Dialogue boxes and their
definitions are outlined below.
• Choice
– Example: “Save message?”
• Reconfirm
– Example: “Erase all messages?”
• Performing
– Example: “SENDING...” “Connecting...”
• Completed
– Example: “Message saved”
• Information
– Example: “New Message”
• Error
– Example: “Card not available, Insert card”
Understanding Your Phone
14
• Warning
– Example: “Low Battery,” “Memory Full!”
Tip: You can set your phone to answer calls automatically, without any input from
you. (For more information, refer to “Auto Answer” on page 114.)
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlight dims and turns off after 60
seconds to conserve battery power, regardless of the Backlight setting.
For more information, refer to “Backlight” on page 111.
Your Phone’s Modes
2.
Highlight an option.
3.
Press
to select the method for answering calls.
Input mode
Input mode determines how you enter text, numbers and
symbols. While at any text entry screen, press the Left soft key
(
), then choose the input mode from the pop-up menu
using the navigation keys. Optional input modes are T9 Word,
Abc, ABC, 123, and Symbols. (For more information, refer to
“Entering Text” on page 30.)
Call Answer Mode
Tip: You can also cycle between T9 Word, Abc, and 123 by repeatedly pressing and
holding the + key.
You can select how you wish to answer a call.
1.
In standby mode, press the MENU key (
), then select
Settings ➔ Call Settings ➔ Call Answer. The following
call answer options appear in the display:
• Any Key — Pressing any key except
or
answers a
call.
• Send Key — Only pressing
answers a call.
• Flip Open — Only opening the flip or pressing
answers a call.
15
Lock Modes
Phone Lock
When the phone is in Phone Lock mode, restrictions are placed
on phone use. You can receive calls and messages, but cannot
place outgoing calls (except for emergency numbers) until you
unlock the phone. Phone Lock mode also restricts access to
menus and the volume key. Unlock your phone by entering the
lock code when prompted. (For more information, refer to “Lock
Phone” on page 116.)
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all active phone status icons.
• To place a call, while in standby mode, enter a phone number, and
press
.
• To end the call and return to standby mode, press
.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following options also appear in the
display:
• View Now
• View Later
Highlight the desired option and press
.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in Talk mode. Press the Options
(right) soft key (
) to display a list of menu options. (For
more information, refer to “The In-Use Options” on page 28.)
Speakerphone Mode
While in standby mode or Talk mode, press and hold the
Speakerphone key (
) to switch from using the earpiece to the
speakerphone (speakerphone option) and back to using the
earpiece. Use the volume keys — located on the left side of your
phone — to adjust the volume.
When you end a call, your phone automatically drops out of
Speakerphone mode.
In Speakerphone mode, press and hold the Speakerphone key
(
) to switch back to using the earpiece.
Silent Mode
Silences all tones your phone makes and replaces the ringers
with vibrations.
䊳
In standby mode, press and hold
until “Entering silent
mode” pops-up.
Understanding Your Phone
16
Adjust the Ringer
1.
In standby mode, press the Volume key (
) on the
left side of the phone Up or Down. Options are:
• Ringer Off
• Medium
• Vibrate
• Medium/High
• Low
• High
• Low/Medium
• Vibrate/High
2.
When you are satisfied with the setting, press SET(
).
Your phone returns to standby mode.
Tip: You can also access the Volume-Voice Calls sub-menu by pressing the
MENU key ( ), then pressing the
,
, , and keys. Use the
Navigation key or the Volume key (on the upper left side of your phone) to
adjust the ringer volume setting.
wxyz
Note: The Vibrate icon (
Vibrate mode.
17
def
) appears in the display when the phone is in
Section 3: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
Making a Call — Number Entry Dialing
1.
With the phone on, enter the number you wish to call using
the keypad.
2.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Press
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
to place the call.
Dialing Emergency Numbers
To place an emergency call:
1.
With the phone on, enter 911 using the keypad.
2.
Press
Dialing International Numbers
Call another country from the U.S.
1.
the United States.
to place the call.
You can specify other numbers as emergency numbers using the
Emergency # settings. (For more information, refer to
“Emergency #” on page 117.)
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
In standby mode, enter the three-digit exit code (011) for
2.
Enter the country code for the country that you are calling.
3.
Enter the number that you wish to call, then press
.
Note: Puerto Rico and Canada are on the North American dialing plan. When
making calls to Puerto Rico and Canada it is similar to making calls
within the United States, no unique country codes are necessary.
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Call Functions
18
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
• Wait — A hard pause stops the calling sequence until you press
.
To manually call a number with pause(s) without storing it to your
Contacts:
1.
2.
Enter the number you wish to call.
Press Options. A pop-up menu containing the following
options appears in the display:
• 2-Sec Pause — a two-second pause.
• Wait — a hard pause (awaits input from you).
Select the desired pause option to add to your number
sequence.
3.
Press
to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
19
dial) numbers for your contacts. (For more information, refer to
“Assigning Speed Dial Numbers” on page 41.)
One-Touch Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 002 through 009
by pressing and holding a single key.
Example: For Speed Dial number 3, press and hold
until the name and
number appear in the display and the number is dialed.
def
Two-Touch Dialing
Speed Dial numbers 10 through 99 are special Two-Touch dialing
numbers.
Example: For Speed Dial number 13, briefly press
, then press and hold
until the name and number appear in the display and the
number is dialed.
def
Three-Touch Dialing
Speed Dial numbers 100 through 999 are special Three-Touch
dialing numbers.
Example: For Speed Dial number 113, briefly press
, briefly press
again, then press and hold
until the name and number appear
in the display and the number is dialed.
def
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) 2-Sec Pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored in your
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name.
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1.
In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
2.
Press the Up navigation key. The Contact List screen
appears showing the desired Contact name, as shown.
3.
Press
Making a Call — Voice Dialing
Your The r500 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
In standby mode, press
.
“Say a Command” appears in the display and is
to call the number.
pronounced through the earpiece.
Note: To set Quick Search, refer to “Quick Search” on page 120.
2.
Say, “Call”.
You are prompted to “Say the name or #”.
Call Functions
20
3.
Speak clearly and say the name of a person in your
• “Mobile”
Voice Dial dials the specified number.
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
choice list of up to three names and prompts you with “Did
Say “Yes” to confirm the name or “No” to hear the next
pronounced through the speaker.
2.
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 104,)
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
displays the possible choices and prompts you with
number on the list.
“Which number?”
• “Home”
• “Work”
21
Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
(that is, Home, Work, Mobile, and so on), Voice Dial
Say one of the following number types:
Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3.
• Press Repeat to say the name again.
• Press CLR or
to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
5.
.
“Say a Command” appears in the display and is
you say?” followed by the first name on the list.
4.
In standby mode, press
4.
Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Choice Lists” on
page 104.)
• Press Repeat to say the name again.
• Press CLR or
to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (two-second) 2-Sec Pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains (hard) Wait(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Ringer Off, Vibrate, Low,
Low/Medium, Medium, Medium/High, High, or Vibrate/High,
and/or different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
• Your phone continues to notify you of the call until one of the following
events occurs:
– You answer the call.
– You ignore the call.
– The calling party ends the call.
– The call is sent to Voicemail.
Answering an Incoming Call
䊳
Press
. The ring tone and/or vibration stop and the
caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but the
key. (For more information, refer to “Call Settings”
on page 113.
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
䊳
During an incoming call, press the Ignore soft key. The
caller is forwarded to your voice mail.
Adjusting the Call Volume
During a call, repeatedly press the Volume key (on the left side of
phone) Up or Down until the desired volume is heard in the
earpiece or headset.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Call Functions
22
Review the Calls Log
1.
In standby mode, press MENU (
), then select Recent
Calls.
2.
Select the Calls log that you wish to review or the function
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
1.
•
•
•
•
•
•
Outgoing Calls
Incoming Calls
Missed Calls
All Calls
Call Timer
Data Counter
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
In standby mode, press MENU (
), then select Recent
Calls ➔ Outgoing Calls. A list of your outgoing calls
you wish to access:
appears in the display.
2.
Highlight a call, then press OPEN (
) to view further
information about the call.
3.
Press Options. A pop-up menu containing the following
options appears in the display:
• Save — Save the number to your Contacts.
• Details — Calls to Contacts Only — Shows the entry for the called
Contact.
• Erase — Erase the selected call from your Outgoing call log.
• Lock / Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Outgoing call log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
• Text Message — Lets you send a text message to the selected
number called.
23
• Picture Message — Lets you send a picture message to the
selected number called.
• Video Message — Lets you send a video message to the
selected number called.
Note: For more information, refer to “Creating and Sending New Messages”
on page 46.
5.
•
•
•
•
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
Select the desired option.
• Text Message — Lets you send a text message to the selected
calling number.
• Picture Message — Lets you send a picture message to the
selected calling number.
• Video Message — Lets you send a video message to the
selected number called.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
1.
In standby mode, press MENU (
), then select Recent
Calls ➔ Incoming Calls. A list of your Incoming calls
appears in the display.
2.
Highlight a call, then press OPEN (
5.
) to view further
information about the call.
3.
Note: For more information, refer to “Creating and Sending New Messages”
on page 46.
Press Options. The following options appear in the display:
• Save — Save the number to your Contacts.
• Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
Select the desired option.
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
Call Functions
24
1.
In standby mode, press MENU (
), then select Recent
Calls ➔ Missed Calls. A list of your missed calls appears
Note: For more information, refer to “Creating and Sending New Messages”
on page 46.
in the display.
5.
2.
Highlight a call, then press OPEN (
) to view further
information about the call.
3.
Press Options. The following options appear in the display:
• Save — Save the number to your Contacts.
• Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
• Erase — Erase the selected call from your Missed call log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Missed call log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
• Text Message — Lets you send a text message to the selected
called number.
• Picture Message — Lets you send a picture message to the
selected called number.
• Video Message — Lets you send a video message to the
selected number called.
25
Select the desired option.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1.
In standby mode, press MENU (
), then select Recent
Calls ➔ All Calls. A list of all logged calls appears in the
display.
2.
Highlight a call, then press OPEN (
) to view further
information about the call.
3.
Press Options. The following options appear in the display:
• Save — Save the number to your Contacts.
• Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
• Erase — Erase the selected call from your Calls log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Calls log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press Msgs. The following options appear in the display:
• Text Message — Lets you send a text message to the selected
calling/called number.
• Picture Message — Lets you send a picture message to the
selected calling/called number.
• Video Message — Lets you send a video message to the
selected number calling/called.
Note: For more information, refer to “Creating and Sending New Messages”
on page 46.
• Outgoing Calls — View the duration of the total outgoing calls
made on your phone since the last erasure.
• Incoming Calls — View the duration of the total incoming calls
received on your phone since the last erasure.
• Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
• All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Calls — View the duration of all calls since your phone
was activated.
2. Press Reset to reset a selected counter except Last Reset
and Lifetime Calls.
5.
Select the desired option.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.
1.
In standby mode, press MENU (
3.
Press Reset All to reset all counters except Lifetime Calls.
4.
Press
or
if you wish to exit the list.
Note: Although Total call timers can be erased, the Lifetime call timer can
never be erased.
Data Counter
), then select Recent
Calls ➔ Call Timer. The following options appear in the
display:
• Last Call — View the duration of your last call.
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Call Functions
26
Roaming
Note: Data Counter is not for billing purposes.
1.
In standby mode, press MENU (
What is Roaming?
), then select Recent
Calls ➔ Data Counter. The following options appear in the
display:
• Transmit — View the total amount of data transmitted by your
phone since the last reset.
• Received — View the total amount of data received by your phone
since the last reset.
• Total — View the total amount of data sent or received by your
phone since the last reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
2. Press Reset to reset a selected counter except Last Reset
and Lifetime Calls.
3.
Press Reset All to reset all counters except Lifetime Calls.
4.
Press
or
if you wish to exit the list.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
27
Roaming lets you use your The r500 phone when you travel
outside of your Wireless Provider’s coverage area. The Roaming
icon ( ) appears in the top line of the display when Roaming is
active, and extra charges may apply when making or receiving
calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
• Home only — Your phone is available for normal operation only in the
designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note: For more information, refer to “System Select” on page 119.
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of the menus available with your phone.
Create Txt Msg
Menu Navigation
Access menus using the MENU key ( ), the Navigation key, the
two soft keys (
), or a shortcut.
1.
In standby mode, press MENU (
Recent Calls
Inbox
). The Main Menu
appears in the display.
2.
Use the Navigation key to browse phone menus.
3.
Press
to access a menu or sub-menu highlighted in
the display.
Return to the Previous Menu
Press
CLR
or Back to return to the previous menu.
Navigation Key Shortcuts
In standby mode, press the Navigation key in a particular
direction (as illustrated below) to launch its corresponding
application.
Calendar
The In-Use Options
Access numerous menus and features even while in a call.
Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually
returns to standby mode.
1.
While in a call, press Options. The following menu items
appear in the display:
• Message — The Messages menu appears in the display. (For
more information, refer to “Messaging” on page 46.)
• Contacts — The Contacts Find screen appears in the display.
Menu Navigation
28
• Recent Calls — The All Calls menu appears in the display.
• Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
• Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection. For this option to work correctly, you must have the
Enhanced privacy option enabled in the Security settings. (This
option is enabled by default.)
• Location — Lets you set location identification function for
continuous operation or to operate only in the event that you dial
911.
• Voice Memo — Lets you record your side of the current
conversation for up to one minute.
• Connect Bluetooth — Connects a Bluetooth device, such as a
headset, in place of the phone’s earpiece and microphone.
Do one of the following:
• Use the Navigation key to highlight a menu or feature. Press the
key to open the highlighted menu or to activate the highlighted
feature.
• Press the CLR key to exit the menu.
Tip: You can block sound going to the other party(ies) on this call by pressing
Mute. This can reduce noise on conference calls.
You can launch Speakerphone mode to conduct this call hands-free by
pressing
.
29
Navigate Using Shortcuts
You can also access menus and sub menus using menu
numbers. This method is often called a “shortcut.” To shortcut to
a menu or sub menu, press the MENU key ( ), then enter the
menu and/or sub menu number(s) for the feature in question.
1.
In standby mode, press MENU (
). The main menu
appears in the display.
2.
Press the number of the menu, sub menu, and so on to
arrive at the desired feature.
Section 5: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.
Text Entry Modes
You can compose text messages using alphabetical characters,
symbols, and numbers. Each method of character entry (symbol,
number, and so on) is called a text entry mode. There are four
text entry modes, as indicated:
• Alpha—Alphabetical text entry mode. Options are:
– ABC — All upper case
– Abc — Initial capital
– abc — All lower case
• Symbols — Symbol entry mode. Enter symbols into your message by
pressing the corresponding number that appears above it in the
display.
• 123 — Number entry. Enter numbers by pressing the corresponding
key on the keypad.
• T9 Word — Predictive text mode. Press each key only once to enter
the letter of the word that you’re spelling.
Your current mode of text entry [Abc, 123, or T9 Word] is
indicated in the lower left part of the display when composing a
text message.
Changing the Text Entry Mode
䊳
While composing a text message, press the Left soft key.
A pop-up menu containing the following options appears in
the display:
• T9 Word
• Abc
• ABC
• 123
• Symbols
Abc is highlighted. Use the Up and Down navigation keys
to choose any of the other four text entry modes. Uses of
the text entry modes are explained in greater detail in
“Messaging” on page 46.
Entering Text
30
Entering Text in Alpha (Abc) Mode
1.
the key with the desired characters (such as, pressing
ghi
2.
once for “G”).
2.
abc
def
, the word “Bad” is
When you have completed pressing all the keys for the
desired word, review the word appearing in the text entry
Press the key repeatedly until the desired character
appears in the display (such as, pressing
ghi
two times
for “H”).
3.
Example: If you press the key sequence
likely to appear in the text entry field.
abc
Enter characters while in Alpha (Abc) mode by pressing
field.
3.
If the word in the text entry field is not the one you meant
to enter, repeatedly press
Pause briefly and the displayed character is accepted and
until the word you want
appears.
inserted into your message.
4.
Press
to enter a space.
Entering Text in T9 Word Mode
T9 Word recognizes commonly used words for a sequence of
key presses and inserts the word into your message. Using T9
mode is much faster than the more traditional method Alpha
mode, since T9 requires only one key press per letter of the word
that you are spelling.
Note: See “Changing the Text Entry Mode” on page 30 for instructions on
changing text entry modes.
1.
Example: When you press the key sequence
, the word “And”
appears on the screen. Suppose the word you want is “Cod”. Just
repeatedly press the
key until “Cod” is highlighted in the
display.
abc
4.
Press the
mno
def
key to accept the highlighted word.
For practice, enter the word ‘Samsung’ into your message
by pressing each of the following keys only once:
pqrs
abc
mno
S
a
m
pqrs
s
tuv
u
mno
n
ghi
g
While in T9 Word mode, press each key that corresponds
to a desired letter, in sequence, one time.
T9 Word recognizes that the most commonly used word
for the sequence of keys you just pressed is “Samsung.”
31
Tip: To enter words not likely to be in the T9 Word dictionary, such as
uncommon abbreviations or slang, try changing the text entry mode
from T9 Word to Abc or ABC.
䊳
Entering Upper and Lower Case Letters
While in T9 Word or Abc mode, repeatedly press
+
to
change the capitalization setting.
The left soft key label changes to indicate the current
message.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or % in a
text message.
1.
Message to compose a new text message.
For example, if the left soft key label is ABC, and you want
+
until the left soft key
label changes to abc, then enter the word “ball”.
In standby mode, press the Message shortcut (Up
navigation) key, then select Send Message ➔ Text
capitalization setting.
to enter the word “BALL”, press
While in 123 mode, press the key containing the
corresponding number that you wish to insert into your
In Abc and T9 Word modes, you can select to enter only upper
case letters (ABC/T9 WORD), only lower case letters (abc/T9
word), or a mix of the two (Abc/T9 Word).
䊳
Note: See “Changing the Text Entry Mode” on page 30 for instructions on
changing text entry modes.
2.
Enter the phone number of the recipient, then press
3.
Press the Left soft key. A pop-up menu containing the
.
following options appears in the display:
Tip: To enter a capital letter within a word, such as “SimTam”, change the
capitalization setting to Abc at the beginning of the word and before
entering the “T”. The capitalization setting will automatically change to
abc after you enter each upper case letter.
Entering Numbers
Enter numbers into a text message while in number mode (123).
•
•
•
•
•
T9 Word
Abc
ABC
123
Symbols
Entering Text
32
4.
Use the Up and Down navigation keys to highlight
Symbols, then press
. The first of three screens of
symbols appears in the display.
5.
Page through the other symbols by pressing Prev and Next
to page through the other symbols, if necessary.
6.
Press the key that corresponds with the symbol that you
wish to enter. For example, press
ghi
for an exclamation
point (!).
Note: You can also use the navigation keys to highlight the desired symbol
and then press the
key to enter the selected symbol into your
message.
7.
Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
33
Section 6: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
• Speed Dial — Assign speed dial numbers to your Contacts.
• Group — Rename one of your five Contacts groups.
• Memory Info — View available memory for dial entries.
2. Use the navigation keys to highlight the Contacts submenu or option of your choice, and press the
key.
Tip: You can also access a sub-menu or menu option by pressing the number
key corresponds to the menu item number. For example, press
for
Add New Entry.
abc
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
numbers stored in your Contacts list faster. (See page 19.)
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1.
Open Your Contacts List
1.
In standby mode, press MENU (
In standby mode, press MENU (
), then select Contacts
➔ Add New Entry. The Add New Entry screen appears in
the display with the Name field highlighted.
), then select Contacts.
The following Contacts sub-menus and options appear in
2.
the display:
• Find — Find a phone number by entering a Contact name.
• Add New Entry — Add a number or e-mail to your Contacts.
Enter a name or phrase to associate with the type using
the keypad. (For more information, refer to “Entering Text”
on page 30.)
3.
Use the navigation keys to highlight each field.
Understanding Your Contacts
34
4.
Enter a phone number (Mobile, Home, or Work,) or an
1.
e-mail address (E-Mail) for the new Contacts entry.
5.
6.
available) appear in the display.
2.
display showing the following options:
If desired, select a unique Ringtone to identify this new
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
page 112.)
If desired, enter an additional phone number (Pager or
Fax) for the new Contacts entry.
8.
If desired, select an identifying image by highlighting the
photo ID field and pressing the Set soft key. The My
9.
Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.
Creating a new Contacts entry:
3.
Use the navigation keys to highlight Create New, then
Images screen appears in the display. (For more
press
information, refer to “My Images” on page 84.)
display:
Press SAVE (
) to save the new Contacts entry.
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
35
Press the Save soft key. The Save screen appears in the
contacts. (See “Group” on page 38 for more information.)
Contact. (For more information, refer to “Ringer Type” on
7.
to end your call, the call time, length
of call, phone number, and name of the other party (if
If desired, assign the new Contact to a Group. This lets you
send messages to and find this Contact and other related
After you press
4.
. The following (number type) icons appear in the
Mobile
Home
Pager
Fax
Work
Use the Navigation key to highlight the number type that
matches your new entry and press
. The Add New
Entry screen appears in the display with the number being
save populating the selected number type field. (For more
9.
information on creating a new Contacts entry, see “Using
(For more information, see “Editing an Existing Contact
the Contacts Add Option” on page 34.)
Entry” on page 40.)
10. Press SAVE (
Adding the number to an existing Contacts entry:
5.
Use the navigation keys to highlight Update Existing, then
press
. The Update Existing screen appears in the
display showing your current Contacts list.
6.
You can store numbers from the Calls logs to your Contacts.
1.
2.
Existing screen:
8.
Pager
Fax
Work
Use the Up and Down navigation keys to highlight the
appropriate unassigned number type, then press
. The
Press the corresponding number on the keypad to view the
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
• Data Counter
A list of your calls appears in the display.
. The
following (number type) icons appear in the Update
Home
), then select Recent
following Calls logs:
Contacts Entry” on page 37.)
Mobile
In standby mode, press MENU (
Calls.
information on finding a Contacts entry, see “Finding a
Highlight the desired Contacts entry, then press
) to save the entry.
Storing Number from a Calls Log
Enter the first few characters of the Contacts entry name
under which you will store the saved number. (For more
7.
Make any added changes you wish to the Contacts entry.
3.
Use the Navigation key to highlight the number you wish to
store in Contacts.
Edit Contact screen appears in the display.
Understanding Your Contacts
36
4.
Press the Options soft key. The following options appear in
the display:
• Save — Saves the selected number to your Contacts list.
• Erase — Deletes the selected number from the selected Calls log.
• Lock / Unlock — Prevents/allows deletion of the selected
number.
• Erase All — Deletes all numbers from the selected Calls log.
• View Timer — Shows the call times for the Last Call, Outgoing
Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, and
Lifetime Calls timers for the selected Calls log.
5. Use the navigation keys to highlight Save, then press
.
The following options appear in the display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 35.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
37
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press the
key to launch
VoiceSignal.
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 104.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press the Settings soft key,
then press the Exit soft key.
5. The contact information for the name you selected appears
in the display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
1.
In standby mode, do one of the following:
• Press Contacts.
• Press MENU ( ), then select Contacts ➔ Find.
The FIND screen appears in the display with an
alphabetical list of Contacts showing.
2.
Enter the first few characters of the name of the contact as
it appears in your Contacts list.
Example: If you saved a contact name as “Amy Smith”, begin your search for that
contact by pressing abc for “A”.
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3.
When the desired Contacts entry is listed in the display,
highlight the contact (if necessary). Then, do one of the
following
•
•
•
•
Press
to dial the number associated with the named contact.
Press Edit to change the information about the contact.
Press VIEW ( ) to show information about the contact.
Press Options. The following options appear in the display:
– New Contact — Lets you add a new number to your Contacts list or to
the selected contact.
– Erase — Lets you delete the highlighted contact.
– Send Text Msg — Lets you send a text message to the selected
contact.
– Send PIC Msg — Lets you send a picture message to the selected
contact.
– Send Video Msg — Lets you send a video message to the selected
contact.
– Call — Lets you place a call to the highlighted contact.
– Send Name Card With Bluetooth — Lets you send the highlighted
contact to another Bluetooth device.
4. Select an option to enter that option’s sub-menu.
Group
This option lets you find a Contacts list entry with a specific
Group name.
Understanding Your Contacts
38
1.
In standby mode, press MENU (
), then select Contacts
➔ Group. The Group List screen appears in the display.
2.
Select the name of the group you wish to browse. The
selected Group list appears in the display.
3.
Search by Number
This option lets you find a Contacts list entry by one of its phone
numbers.
1.
Contacts list entry you wish to find (such as the area code
Use the Up and Down navigation keys to find the desired
or area code and exchange — for example, 888-987).
Contacts entry.
4.
When the desired Contacts entry is listed in the display,
highlight the Contact (if necessary). Then, do one of the
following:
• Press the Remove soft key to delete the selected contact from the
Group. (Does not apply to No Group.)
• Press to ADD an existing contact entry to the selected Group.
(Does not apply to the General group.)
• Press the Options soft key. The following options appear in the
display:
– Send Text Msg — Lets you send a text message to selected
contact(s) in the current group.
– Send PIC Msg — Lets you send a picture message to selected
contact(s) in the current group.
– Send Video Msg — Lets you send a video message to selected
contact(s) in the current group.
5. Select an option to enter that option’s sub-menu.
39
In standby mode, enter the first few numbers of the
2.
Press Options. The following menu options appear in the
display:
• Search — Lets you find Contacts list entries by their phone
numbers.
• 2-Sec Pause — Adds a two-second pause.
• Wait — Adds a hard pause (awaits input from you).
• Send Text Msg — Lets you send a text message to the entered
number.
• Send PIC Msg — Lets you send a picture message to the entered
number.
• Send Video Msg — Lets you send a video message to the
entered number.
3. Select the Search option. The FIND screen appears in the
display listing all phone numbers in your Contacts list that
contain the entered digits.
4.
Highlight the desired Contacts entry. Then do one of the
. Your
• Press the
key to dial the highlighted number.
• Press the OK key ( ) to display information about the Contacts
entry associated with the highlighted number. From the View
Contact screen, you can erase or edit the selected Contacts entry.
the display.
Once stored in the Contacts, an entry can be changed quite
easily.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 37.)
2.
When you’re finished editing the entry, press
changes are saved and a confirmation message appears in
Editing an Existing Contact Entry
1.
6.
following:
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3.
Highlight a number stored in this contact entry.
4.
Press
5.
Press and hold
CLR
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
• Wait — A hard pause stops the calling sequence until further input
from you.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
to backspace and delete numbers.
CLR
to clear all numbers in the
highlighted field.
Note: You can also add numbers (such as a second Mobile number or a Fax
number) to the entry, assign it to a Group, and add other information.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
1.
In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
Understanding Your Contacts
40
2.
Press the Options soft key. The following menu options
2.
appear in the display:
• Search — Lets you find Contacts list entries by their phone
numbers.
• 2-Sec Pause — Adds a two-second pause.
• Wait — Adds a hard pause (awaits input from you).
• Send Text Msg — Lets you send a text message to the entered
number.
• Send PIC Msg — Lets you send a picture message to the entered
number.
• Send Video Msg — Lets you send a video message to the
entered number.
3. Highlight the pause option of your choice.
4.
Press
to enter the highlighted pause into your number
sequence.
5.
When you’re finished entering the number and pauses,
in the display with the contact name highlighted.
3.
Highlight a number stored in this contact entry.
4.
Use the navigation keys to place the cursor where you
want to add a pause (usually at the right-hand end of the
number).
5.
Contacts.
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 37.)
41
Press the Options soft key. The following menu options
appear in the display:
• Set Speed Dial — lets you assign a Speed Dial number to this
Contacts entry.
• Set As Default — your phone automatically dials this number
when you find this Contacts entry and press
.
• 2-Sec Pause — a two-second pause.
• Wait — a hard pause (awaits input from you).
6. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
press the Save soft key to store the number in your
Add Pauses to an Existing Contacts Entry
Press the Edit soft key. The Edit Contact screen appears
7.
When you’re finished entering pauses, press
to save
your changes to the number in your Contacts.
Assigning Speed Dial Numbers
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options pop-
up menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
1.
Press
6.
Enter, or use the navigation keys to select, an unassigned
7.
Press the Edit soft key. The Edit Contact screen appears
Use the navigation keys to highlight a number stored in
• Set Speed Dial — lets you assign a Speed Dial number to this
Contacts entry.
• Set As Default — your phone automatically dials this number
when you Find this Contacts entry and press
.
• 2-Sec Pause — a two-second pause.
• Wait — a hard pause (awaits input from you).
Set Speed Dial is highlighted.
Press
to save the new Speed Dial number assignment.
Add a Number or E-Mail Address to an Existing Entry
1.
Find the desired entry in the Contacts list. (See “Finding a
Contacts Entry” on page 37 for more information.)
Press the Options soft key. The following menu options
appear in the display:
Press the Yes soft key to assign the selected Speed Dial
number. The Edit Contact screen appears in the display.
9.
4.
to assign the new Speed Dial number to the
assignment.
8.
this contact entry.
Note: If a contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you speed dial that contact.
Press
selected Contact. You are prompted to confirm the
in the display with the contact name highlighted.
3.
. The Speed Dials screen appears in the display.
Speed Dial number.
Find the desired entry in the Contacts list. (See “Finding a
Contacts Entry” on page 37 for more information.)
2.
5.
2.
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3.
Use the navigation keys to highlight a number field or
E-Mail field in this contact entry.
4.
Enter the phone number or e-mail address for the new
Contacts entry.
Understanding Your Contacts
42
5.
Press
to add the number or e-mail address to the
– Press the Left soft key. A pop-up menu appears in the display with the
current text entry mode highlighted.
– Select Shortcuts.
– Select the desired domain type (such as, .com, .net, or .edu).
existing entry.
Edit an Existing E-Mail Address
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 37.)
2.
Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3.
Use the keypad to edit the E-Mail address. (For more
Press
to save your changes.
You can assign and change Speed Dial numbers for Contacts
entries.
1.
In standby mode, press MENU (
), then select Contacts
➔ Speed Dial. The Speed Dial list appears in the display.
Use the navigation keys to highlight the E-Mail field
(labeled with the @ symbol).
4.
5.
Speed Dial Numbers
Tip: You can also assign a Speed Dial number when creating or editing a
Contacts entry. See See “Assigning Speed Dial Numbers” on page 41.
for more information.
information, refer to “Entering Text” on page 30.)
• To insert the @ symbol, do the following:
– Press the Left soft key. A pop-up menu appears in the display with the
current text entry mode highlighted.
– Select Shortcuts.
– Select the @ symbol.
– Enter the remainder of the e-mail address using the keypad. (For more
information, refer to “Entering Text” on page 30.)
• To add the domain type to the end of the e-mail address, do the
following:
43
2.
Enter a Speed Dial number in the Go To field or use the
navigation keys to highlight a Speed Dial number.
3.
Press SET (
). The Set Speed Dial screen appears in
the display.
4.
Enter a Contact name or use the navigation keys to
highlight a Contact entry.
5.
Press
. You are prompted to confirm the new Speed
Dial setting.
6.
Press the Yes soft key to save the new setting. Press the
No soft key to discard the new setting.
Renaming a Contacts Group
Use this option to rename a group in your Contacts list.
1.
In standby mode, press MENU (
), then select Contacts
➔ Group. A list of group names (like the following list)
appears in the display:
•
•
•
•
•
No Group
Business
Colleague
Family
Friends
Note: You cannot rename No Group.
2.
Use the Navigation keys to highlight the group (other than
• Send PIC Msg — Lets you send a picture message to all contacts
in the selected Group.
• Send Video Msg — Lets you send a video message to all
contacts in the selected Group.
• Rename — Lets you change the name of the selected Group.
• Erase — Lets you delete the selected Group (this does not delete
the related Contacts).
• Add — Lets you add a Contact to this Group.
3. Select Rename. The Rename Group screen appears in
the display. The current name of the selected group shows
with a flashing cursor at the end of the name.
4.
information, refer to “Entering Text” on page 30.)
5.
display:
• Send Text Msg — Lets you send a text message to all contacts in
the selected Group.
Press
to save the changed group name.
Deleting a Contacts Entry
1.
No Group) that you wish to rename, then press the
Options soft key. The following options appear in the
Enter a new group name using the keypad. (For more
Find the desired entry in the Contacts list. (See “Finding a
Contacts Entry” on page 37 for more information.)
2.
Press the Options (right) soft key (
). A pop-up
menu containing the following options appears in the
display:
• New Contact — Lets you add an entry to your Contacts list.
Understanding Your Contacts
44
• Erase — Erases the selected Contact.
• Send Text Msg — Lets you send a text message to the selected
contact.
• Send PIC Msg — Lets you send a picture message to the
selected contact.
• Send Video Msg — Lets you send a video message to the
selected contact.
• Call — Calls the highlighted Contact.
• Send Name Card With Bluetooth — Lets you send the
highlighted contact to another Bluetooth device.
3. Use the navigation keys to highlight Erase.
4.
Press
5.
Press Yes to erase the Contacts entry or No to keep the
. The phone prompts you to confirm the erasure.
entry.
Memory Info
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
䊳
In standby mode, press MENU (
), then select Contacts
➔ Memory Info. The amounts of memory used and
remaining for Contacts entries appear in the display.
45
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
Accessing Your Messages
䊳
To access the Messages menu from standby mode, do
one of the following:
• Press the Messages shortcut (Up navigation) key.
• Press MENU ( ), then select Messages.
The Messages menu appears in the display.
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text messages, picture messages, and video messages.
Creating and Sending a Text Message
1.
From the Messages menu, select Send Message ➔ Text
Message. The Create Text Msg screen appears in the
display showing the To list.
2.
• To select a mobile number or e-mail address using your Contacts
list, press Add. The following options appear in the display:
– Contacts
– Groups
– Recent Calls
The Contacts option is highlighted.
Press the key. The Add Contacts screen appears in the display.
See “Finding a Contacts Entry” on page 37 for more information
on finding a contact.
Use the Up and Down navigation keys to highlight a contact. Use the
Left and Right navigation keys to select a phone Number or E-Mail
address for the highlighted Contact. Press to mark your selection.
To add the selected contacts to the Send To list, press Done. The
Create Text Msg screen appears in the display.
• To enter recipient e-mail address(es), press and hold + to change
the text entry mode from 123 to T9 word or abc. (For more
information, refer to “Add a Number or E-Mail Address to an
Existing Entry” on page 42.)
3. When you are finished addressing your message, press
. The Text field appears in the display.
Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s):
4.
Enter the text for your message using the keypad. (For
more information, refer to “Entering Text” on page 30.)
Messaging
46
• To change the text input method, do one of the following:
– Repeatedly press and hold the + key until the desired text input
method is indicated by the left soft key label.
– Press the Left soft key (
), use the navigation keys to select the
desired text input method, and press .
• Press the Left soft key (
) to select one of the following text
entry methods:
– T9 Word
– Abc
– ABC
– 123
– Symbols
5. At any point while composing a message, you can set
2.
entering number(s) or e-mail address(es) of message
recipient(s).
(See Step 2 of “Creating and Sending a Text Message” on
page 46 for more information on addressing your
message.)
3.
4.
page 46 for more information on choosing a text entry
method, also see “Entering Text” on page 30 for more
). (See “Message Send Options” on page 50
information on using text entry methods.)
5.
Once you’re finished composing your message, press the
SEND key (
1.
From the Messages menu, select Send Message ➔
Picture Message. The Create Pic Msg screen appears in
the display with the To field highlighted.
47
Press the Navigation key Down. The Text field becomes
highlighted.
) to send your message.
Creating and Sending a Picture Message
Enter the Subject text using the keypad.
(See Step 4 of “Creating and Sending a Text Message” on
for more information.)
6.
After addressing your picture message, the Subject field
becomes highlighted.
message send options by pressing the Options (right) soft
key (
Address your message by selecting contacts and/or
6.
Enter the message text using the keypad.
(See Step 4 of “Creating and Sending a Text Message” on
page 46 for more information on choosing a text entry
method, also see “Entering Text” on page 30 for more
information on using text entry methods.)
7.
To set message send options, press Options. (See
11. Press the
“Message Send Options” on page 50 for more
information.)
8.
To add a picture to the message, use the navigation keys
to highlight the PIC field.
• Press My PIC to access the picture gallery. If there are no pictures
in the gallery, press Camera to launch the camera, then take a
picture. If there are pictures in the gallery, thumbnail pictures
appear in the display. Then, do the following:
– Use the navigation keys to highlight a picture in the gallery.
– Press View to expand the highlighted picture to fill the display.
– Press Camera to activate the phone’s camera and take a new picture.
(For more information, refer to “Camera” on page 60.)
• Press Options. (See “Message Send Options” on page 50 for
more information.)
9. Once you have selected a photo, press
. The Create
Pic Msg screen appears in the display with the selected
photo in the PIC field.
The Sound field becomes highlighted.
10. Press Sounds. The Record New option and a list of sound
files appear in the display with the Record New option
highlighted.
key to record a new sound file, or use the
navigation keys to select a listed sound file.
• If you select the Record New option, the Record New screen
appears in the display. Press REC ( ) to begin recording.
• Wait for the beep, then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds remaining for
the recording.
– To pause the memo, press Pause When a memo is paused, press
Resume to continue recording.
• Press SAVE ( ) to stop recording. The Record New option and
a list of sound files appear in the display with the Record New
option highlighted.
• Use the Navigation key to highlight your new sound file and press
. The Create Pic Msg screen appears in the display with your
selected sound file in the Sound field.
12. Once you’re finished composing your picture message, do
one of the following:
• Press to SEND the message.
• Press Options. (See “Message Send Options” on page 50 for
more information.)
Creating and Sending a Video Message
1.
From the Messages menu, select Send Message ➔
Video Message. The Create Video Msg screen appears in
the display with the To field highlighted.
Messaging
48
2.
Address your message by selecting contacts and/or
7.
entering number(s) or e-mail address(es) of message
recipient(s), and press OK (
page 46 for more information on addressing your
message.)
3.
After addressing your picture message, the Subject field
becomes highlighted.
4.
Enter the Subject text using the keypad.
(See Step 4 of “Creating and Sending a Text Message” on
page 46 for more information on choosing a text entry
method, also see “Entering Text” on page 30 for more
information on using text entry methods.)
5.
Press the Navigation key Down. The Text field becomes
highlighted.
6.
Enter the message text using the keypad.
(See Step 4 of “Creating and Sending a Text Message” on
page 46 for more information on choosing a text entry
method, also see “Entering Text” on page 30 for more
information on using text entry methods.)
49
“Message Send Options” on page 50 for more
).
(See Step 2 of “Creating and Sending a Text Message” on
To set message send options, press Options. (See
information.)
8.
To add a video to the message, use the navigation keys to
highlight the Video field.
• Press My Video to access the video gallery. If there are no videos
in the gallery, press Video to launch the camcorder, then take a
video. If there are videos in the gallery, thumbnail videos appear in
the display. Then, do the following:
– Use the Navigation key to highlight a video in the gallery.
– Press Play to expand and review the video.
– Press Video to activate the phone’s camcorder and take a new video.
(For more information, refer to “Camera” on page 60.)
• Press Options. (See “Message Send Options” on page 50 for
more information.)
9. Once you have selected a video, press
. The Create
Video Msg screen appears in the display with the selected
video in the Video field.
10. Once you’re finished composing your video message, do
one of the following:
• Press to SEND the message.
• Press Options. (See “Message Send Options” on page 50 for
more information.)
Message Send Options
You can set priority, validity, and other options before you send a
message.
1.
After you’ve composed a text, picture, or video message,
press Options. The following are Send Options that can
appear in the display (which options appear depends on
what type of message you composed and what message
field you have highlighted):
• Edit Send To — Text Message — Lets you change or add to your
list of addressees.
• Preview — Picture/Video Message — Lets you view a Picture or
Video message as the recipient will see it.
• Add Quick Text — Picture/Video Message — Lets you add precomposed text to a message.
• Save As Draft — Saves this message in the Drafts folder.
• Save Quick Text — Text Message — Saves the text of this
message as a Preset Message.
• Priority Level — Lets you assign a High or Normal priority to the
message.
• Validity Period — Lets you set a Date and Time when this
message will no longer be available to the recipient. After the set
period of time, your message is recalled.
• Deferred Delivery — Lets you set a Date and Time for message
delivery.
• (Enh.) Deliver Ack — Set to On to be alerted when your message
is received by the addressee.
• Remove PIC — Removes the picture from a Picture message.
• Remove Sound — Removes the sound file from a Picture
message.
• Remove Video — Removes the video from a Video message.
• Add To Contacts — Lets you add the addressee Numbers or
E-Mail addresses to your Contacts list.
2. Use the Navigation key to display the various Send
Options for each menu item.
3.
When the desired send option is highlighted, press
to
confirm the selection or to enter the send option’s submenu.
Receiving New Messages
When you receive a message in standby mode, an alert sounds
(unless turned off) and a New Message notification appears in
the display along with the closed envelope icon (
).
The date and time of the message and the following options also
appear in the display:
• View Now — Opens the message in the pop-up.
Messaging
50
• View Later — Closes the pop-up and saves the message to your Inbox
where you can view it later.
Checking your Voicemail
1.
Select the desired option.
Select the desired option.
Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Voice Mail Setup
Before callers can leave voice mail messages, you must first set
up your account. (See “Setting Up Your Voicemail” on page 7 and
“Message Settings” on page 56 for more information.)
51
until you’re
connected to the voice mail system. A recorded message
Receive Messages While in a Call
When you receive a message while in a call, a New Message
notification appears in the display along with the closed envelope
icon (
). The date and time of the message and the following
options also appear in the display:
• View Now — Opens the message in the pop-up.
• View Later — Closes the pop-up and saves the message to your Inbox
where you can view it later.
In standby mode, press and hold
prompts you for a password.
2.
Enter your password, then follow the recorded prompts, to
listen to your voice message, change administrative
options, and so on.
Tip: You can also access your Voicemail by using the entries in the Voicemail
folder. See “Voicemail” on page 55 for more information.
Message Folders
Inbox
Received messages of all types (except Voice Mail) are stored in
the Inbox.
1.
From the Messages menu, select Inbox to open the Inbox
folder.
2.
Use the Navigation key to highlight a message, then do
one of the following:
• Press Erase to delete the message.
• Press OPEN to view the highlighted message, then proceed to Step
3.
• Press Options. The following options appear in the display:
– Reply — Lets you reply to a message.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
– Forward — Lets you forward the message to other E-Mail addresses
or mobile phone numbers.
– Lock / Unlock — Blocks or allows erasure of the selected message.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
– Erase Inbox — Deletes all messages from the Inbox folder.
– Message Info — Lets you display status information about a
message.
Select the desired option.
• Press CLR to return to the Messages menu.
3. While viewing a selected message, do one of the following:
• Press Erase to delete the message.
• Press REPLY ( ) to compose and send a message to the sender
of the highlighted message.
• Press Options, The following options appear in the display:
– Play Again — Picture Messages only — Replay a sound file included
with a Picture message.
– Forward — Lets you forward the message to other E-Mail addresses
or mobile phone numbers.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
– Save PIC — Picture Messages only — Saves a copy of the image
included in the selected message to the My Images gallery.
– Save Sound — Picture Messages only — Saves the sound file in the
message to the My Sounds gallery.
– Save Video — Video Messages only — Saves the video file in the
message to the My Videos gallery.
– Save Quick Text — Saves the message text as a Preset Message
entry.
– Lock / Unlock — Block or allow changes to the selected message.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
– Callback # — Lets you call the originator of the message.
– Message Info — Lets you display status information about a
message.
Select the desired option.
• Press CLR to return to the Inbox list.
Messaging
52
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
more information, refer to “Lock Phone” on page 116.)
Outbox
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
Tip: Verify whether and when a message or e-mail was successfully received by
enabling the Delivery Ack message send option. (See “Message Send
Options” on page 50 for more information.)
1.
From the Messages menu, select Outbox. A list of your
outgoing messages appears in the display.
2.
Use the Navigation key to highlight a message, then do
one of the following:
• Press Erase to delete the message.
• Press OPEN ( ) to view the highlighted message, then proceed to
Step 3.
• Press Options. The following options appear in the display:
– Forward — Send the message to another addressee.
– Resend — Re-send the message.
53
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee Numbers or E-Mail
addresses to your Contacts list.
– Erase Outbox — Erase all messages in the Outbox folder.
– Message Info — Lets you display status information about picture
messages.
Select the desired option.
• Press CLR to return to the Messages menu.
3. While viewing a selected message, do one of the following:
• Press Erase to delete the message.
• Press RESEND ( ) to resend a message to the original
addressee.
• Press Options, The following options appear in the display:
– Play Again — Picture Messages only — Replay a sound file included
with a Picture message.
– Forward — Send the message to another addressee.
– Erase — Erase this message, if Unlocked.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Save Quick Text — Save the message text in the Quick Text folder.
– Add To Contacts — Lets you add the addressee Numbers or E-Mail
addresses to your Contacts list.
– Go To URL — Launches the Browser to access a URL in this message.
– Call — Lets you call the recipient of the message.
– Message Info — Lets you display status information about picture
messages.
Select the desired option.
• Press CLR to return to the Outbox list.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
1.
From the Messages menu, select Drafts. A list of your
draft messages appears in the display.
2.
Highlight the message that you wish to edit, then do one of
the following:
• Press Erase to delete the message.
• Press EDIT ( ) to view the highlighted message, then proceed to
One of the following screens appears in the display:
– Text Message — Create Text Msg screen showing the Text field
appears in the display.
– Picture Message — Create Pic Msg screen showing the To list
appears in the display. Change or add numbers and addresses, then
press .
– Video Message — Create Video Msg screen showing the To list
appears in the display. Change or add numbers and addresses, then
press .
Proceed to Step 3.
• Press Options. The following options appear in the display:
– Send — Send the message to the current addressee(s).
– Lock/Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee Numbers or E-Mail
addresses to your Contacts list.
– Save Quick Text — Save the message text in the Quick Text folder.
– Erase Drafts — Erase all messages in the Drafts folder.
Select the desired option.
• Press CLR to return to the Messages menu.
3. If you press EDIT ( ), in the Text screen/field, do one of
the following:
• Press the Left soft key. The following options appear in the display:
– T9 Word — Predictive, single key press per letter text entry mode.
– Abc — Alphabetical, multiple key press text entry mode. The first letter
is capitalized.
– ABC — Alphabetical, multiple key press text entry mode. All letters are
capitalized.
– 123 — Enter numbers by pressing the corresponding key on the
keypad.
– Symbols — Enter symbols into your message by pressing the
corresponding number that appears above it in the display.
Select the desired option.
Messaging
54
• Press SEND ( ).
• Press Options. (See “Message Send Options” on page 50 for
more information.)
4. Once you’re finished composing your message, do one of
the following:
• Press SEND ( ) to send your message.
• Press
to exit the message. You are prompted to save your
changed message to the Drafts folder.
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1.
From the Messages menu, select Voicemail. A Voicemail
status screen indicating the number of new messages in
your voice mailbox, their urgency, and any callback
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
Note: This function erases all messages in a selected message folder or in all
message folders. To delete a single message, from the Messages menu,
open the message folder where the message to be deleted is stored, then
select and delete the message from the Option menu while viewing the
message content.
1.
•
•
•
•
Inbox — Lets you delete all messages from your Inbox.
Outbox — Lets you delete all messages from your Outbox.
Drafts — Lets you delete all draft messages from the Drafts folder.
All Messages — Lets you delete all messages from all message
folders.
2. Use the navigation keys to highlight the folder containing
the messages that you wish to delete.
numbers appears in the display.
2.
Press
From the Messages menu, select Erase Messages. The
following options appear in the display:
to call your voice mailbox and listen to your
3.
Press
to select the highlighted folder. You are
prompted to confirm the erasure of all messages in the
voice messages.
folder.
Note: You can, in standby mode, also press and hold
mailbox.
to dial your voice
4.
Press No to cancel deleting any messages, or press Yes to
delete all messages from the selected folder.
55
Message Settings
The Msg Settings menu lets you define numerous message
settings such as notification types and save options.
1.
From the Messages menu, select Msg Settings. The
following Msg Settings options appear in the display:
• General
– Auto Save — Lets you set whether to automatically save to the Outbox
folder, to discard, or to prompt you to save unsent messages when you
exit them.
– Auto Erase — Automatically erase the oldest read message after
memory is full.
– Quick Text — Lets you change pre-composed text or compose text for
addition to your outgoing messages.
– Voicemail # — Lets you update your Voicemail access number.
– Entry Mode — Lets you set the default text entry mode [T9 Word,
Abc/ABC (alphabetical), or 123 (numerical)] for composing message
text.
– Callback # — Lets you disable, enable, and update the callback
number that can be inserted in outgoing messages.
– Signature — Lets you disable, enable, and update the text signature
that can be inserted in outgoing messages.
– Reminder — Lets you choose whether to be reminded of new
messages Once, Every 2 Minutes, Every 15 Minutes, or not at all (Off).
• Text Message
– Auto View — Automatically displays the message.
– Signature — Lets you disable, enable, and update the text signature
that can be inserted in outgoing Text messages.
– Auto Scroll — When set to On, the phone automatically scrolls
message text, letting you see the complete message text without using
the Navigation key.
• Picture/Video Message
– Auto Receive — Lets you choose whether to be prompted to receive
new Picture/Video messages (Off) or to automatically receive new
Picture/Video messages (On).
– Signature — Lets you disable, enable, and update the text signature
that can be inserted in outgoing Picture/Video messages.
2. Select the desired option and value.
Messaging
56
Section 8: Browser
This section outlines how to launch Browser, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
Note: The first time you launch Browser, the warning message “Browse &
Download use airtime.” pops up in your display. To have this
message repeat the next time you launch Browser, press the Continue
soft key. To stop this message repeating, press the Remove soft key.
Browser
A list of categories (each representing one or more web
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Browser, your phone connects to the Internet and the
service indicator icon (
) appears in the display.
sites) appears in the display.
2.
Use the navigation keys to browse the categories.
3.
Once the desired category is highlighted, press the
Stored Web Content
soft key to enter the category list.
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching Browser
To launch Browser, do the following:
1.
In standby mode, press MENU (
➔ Go to Web.
57
), then select Browser
Exit Browser
䊳
Press
to exit Browser.
Using Browser
When you use Browser, some of the keys operate differently than
during a normal phone call. Browser presents on-screen items in
any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
CLR
Browser soft keys
The bottom of the Browser display is a bar that contains browser
commands. The Left and Right (
) soft keys on the
keypad are used to execute the command that appears above
them in the display. These are called “soft keys” because their
function changes depending on the application.
Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
+
Using Links
Pound/Space Key — Press to insert a space when
entering text.
How Browser Keys Work
wxyz
Navigation keys — Use to browse lists and
options.
Asterisk/Shift Key — Press before entering text to
enable uppercase characters.
Last Key — Press to enter a zero (0), or to move to
the last item in a menu.
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key (
) to select a link when it is highlighted.
The following table lists Browser keys and their functions.
BACK Key — A browse, back-up key. Press once
to back up one page. Press and hold to go back to
home page.
Number 1 thru 9 — Use the number keys to select
items in a menu if they are numbered.
End Key — Press to exit the Browser and return
the phone to standby mode.
Left Soft Key — Press to activate the command
that appears above it in the display.
Right Soft Key — Press to activate the command
that appears above it in the display.
Browser
58
Section 9: Brew
This section explains the Brew feature where users can
download multimedia, applications, games, and check news and
sports.
Finding Applications
With Brew, you can download full featured applications over the
air including games, personalized ring tones, pictures, and more.
To launch Brew, do the following:
䊳
In standby mode, press MENU (
Brew.
59
), then select Brew ➔
Section 10: Camera
Use your The r500 phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
• Take pictures and videos with your phone’s built-in digital cameracamcorder.
• Send and receive pictures and videos taken with your phone’s cameracamcorder.
• Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
Taking Pictures and Videos
Taking pictures and videos with the built-in camera-camcorder is
as simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1.
In standby mode, press and hold the Camera key (
The message “Loading” appears in the display followed
by a camera view finder screen. (For more information,
refer to “Screen Layouts” on page 63.)
Note: You can also activate the camera by pressing MENU (
Multimedia ➔ Camera.
2.
), then select
Using the display as a viewfinder, point the camera at your
subject.
3.
When the image that you wish to capture appears in the
display, press Take (
), then do one of the following:
• Press the Save soft key to save the picture to memory.
• Press Send ( ) to save the picture and include it in a Picture
message.
• Press the Erase soft key to erase the photo.
Tip: You can change a number of the camera’s settings to suit particular uses
for your pictures. For more information, refer to “Camera Options” on
page 65.
)
on the right side of the phone.
Camera
60
Taking Multi Shot Pictures
• Divided Shot — Lets you take a mosaic of 4 or 9 photos.
• Auto/Manual — Lets you select to take the multiple photos
automatically (in quick succession) or to take each successive
photo manually.
4. When you select Series Shot, the following options appear
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1.
in the display:
on the right side of the phone. The message “Loading”
• Off
•3
•5
When you select Divided Shot, the following options
appears in the display followed by a camera view finder
appear in the display:
In standby mode, press and hold the Camera key (
)
screen. (See “Screen Layouts” on page 63. for more
information.)
Note: You can also activate the camera by pressing MENU (
Multimedia ➔ Camera.
2.
Use the Left and Right navigation keys to highlight the
or
Multi Shot icon (
being take) appears in the display.
). The following Multi Shot options
• Series Shot — Lets you take a series of 3 or 5 photos.
or
) or the Divided Shot icon (
) highlighted.
appear in the display:
61
The Series Shot progress bar (
Press the Options soft key. The options menu bar appears
in the display with the Self Timer icon (
3.
), then select
• Off
•4
•9
5. Select 3 or 5 (Series Shot) or select 4 or 9 (Divided Shot).
6.
) (which acts as a progress bar while pictures are
Using the display as a viewfinder, point the camera lens at
your subject.
7.
when the image that you wish to capture appears in the
display, press Take (
Press and hold the Camera key (
) a second time.
The message “Loading” appears in the display followed by
(Manual) or multiple pictures in quick succession (Auto),
the camcorder view finder screen. (See “Camcorder
then the Series Shot Select to Save screen or the Divided
Screen” on page 64 for more information.)
Shot multiple-photo screen appears in the display.
• Series Shot:
– To save the pictures to memory, press the Done soft key.
– To discard the pictures, press CLR .
• Divided Shot:
– To save the pictures to memory, press the Save soft key.
– To send the picture in a picture message, press Send ( ).
– To discard the pictures, press the Erase soft key.
Taking Videos
To take a video using the current camcorder settings, do the
following:
1.
2.
). The camera takes one picture
In standby mode, press and hold the Camera key
(
) on the right side of the phone. The message
“Loading” appears in the display followed by the camera
view finder screen.
Note: You can also activate the camcorder by doing one of the following:
1. Pressing MENU (
), then select Multimedia ➔ Camcorder.
2. From the camera screen, by pressing the Camera key (
).
3. From the camera screen, by pressing the Options soft key, then
selecting the Camcorder icon.
3.
Using the display as a viewfinder, point the camera lens at
your subject.
4.
Press Rec (
) when the image that you wish to capture
appears in the display. Recording continues until you press
Stop (
) or until 15 seconds of video has been recorded,
whichever comes first, then do one of the following:
• Press the Save soft key to save the video to memory.
• Press Send ( ) to save the video and include it in a Video
message.
• Press the Erase soft key to erase the photo.
Camera
62
Screen Layouts
Camera Screen
When you activate your phone’s camera, the
second line of the display is reserved for the
current camera resolution setting and the
picture counter. The center of the display
shows a viewfinder image of the subject at
which the camera is pointed. The soft key
labels on the bottom line of the display change to the following:
• My Images — Pressing the Left soft key opens the My Images
multimedia folder so you can view or manage your stored pictures.
(For more information, refer to “The Photo Gallery” on page 77.)
• Take — Pressing Take (
) takes a picture of the image currently
appearing on the display.
• Options — Pressing the Right soft key opens a menu bar of camera
options and settings.
Camera Screen Icons
Camera — Indicates the camera is active.
Night Shot — Indicates the camera is set to take
pictures in low light.
Quality — Indicates camera’s picture quality setting. (You
can change the picture quality setting. See “Quality” on
page 74. for more information.)
63
Camera Resolution — Indicates camera’s current
resolution setting. (You can change the camera
resolution setting. For more information, refer to
“Camera Options” on page 65.)
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
setting. For more information, refer to “White Balance”
on page 74.)
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Card Memory — Indicates photos will be stored on a
microSD Memory Card.
Zoom — Enlarges the image from X0 to X9 before
you take a picture. (Depending on the camera
resolution setting.)
Brightness — Brightens or darkens the image from
-4 to +4.
Multi Shot in use (Divided Shot) — Takes multiple
pictures automatically (as shown) or manually (
)
when you press the
key. The number of pictures
taken depends upon the Divided Shot setting.
Multi Shot in use (Series Shot) —
Takes multiple pictures when you
press the
key. The number of
pictures taken depends upon the
Series Shot setting.
Self Timer in use — Delays the camera shutter from 2
to 10 seconds after you press the
key.
Camcorder Screen
When you activate your phone’s camcorder,
the first line of the display is shows current
camcorder setting icons. The center of the
display shows a viewfinder image of the
subject at which the camcorder is pointed.
The soft key labels on the bottom line of the
display change to the following:
• My Videos — Pressing the Left soft key opens the My Videos
multimedia folder so you can view or manage your stored pictures.
(For more information, refer to “The Photo Gallery” on page 77.)
• Rec — Pressing Rec (
) starts the camcorder recording a video of
the image currently appearing in the display.
• Options — Pressing the Right soft key opens a menu bar of
camcorder options and settings.
Camcorder Screen Icons
Camcorder — Indicates the camcorder is active.
Quality — Indicates camcorder’s video quality setting.
(You can change the video quality setting. See “Quality” on
page 74. for more information.)
Memory Available — Indicates the percentage of
memory available for you to store a video.
White Balance — Indicates the camcorder’s white
balance setting. (You can change the camcorder white
balance setting. See “White Balance” on page 74. for
more information.)
Phone Memory — Indicates videos will be stored in the
phone’s memory.
Card Memory — Indicates videos will be stored on a
microSD Memory Card.
Zoom — Enlarges the image from X0 to X9 before
you take a video. (Depending on the camcorder
quality setting.)
Brightness — Brightens or darkens the image from
-4 to +4.
Camera
64
Self Timer in use — Delays the camcorder from
recording for from 2 to 10 seconds after you press the
key.
Recording Mode — Indicates camcorder is in MMS
mode (as shown) with Quality and recording time limits or
in Normal mode (
).
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
• Save the picture or video by pressing the Save soft key.
A picture is stored in the My Images folder. A video is stored in the My
Videos folder. These folders are part of the phone’s memory and/or
part of an optional Memory Card devoted to storing, browsing, and
viewing saved pictures and videos. (See “The Photo Gallery” on
page 77. for more information.)
• Send the picture or video to someone else by pressing Send (
).
For a detailed procedure, see “Creating and Sending a Picture
Message” on page 47 or see “Creating and Sending a Video
Message” on page 48.
• Discard the picture or video by pressing the Erase soft key.
Camera Options
The Camera Options let you adjust the default camera settings to
suite available lighting, the subject of the photo, or the purpose of
the photo. To access Camera Options, do the following:
1.
In standby mode, press and hold the Camera key
(
2.
Press and hold the Options soft key. The following submenus appear in the display:
• Self Timer
• Multi Shot
• Quality
• Resolution
• White Balance
• Fun Tools
• Settings
• Camcorder
3. Use the Left and Right navigation keys to highlight a
desired option.
4.
Use the Up and Down navigation keys to highlight a
Setting.
65
). The camera viewfinder screen appears in the
display.
5.
Use the Up and Down navigation keys to highlight an
The next time you press
option or setting value, then press
indicates the time remaining before the camera takes the
to save the selected
setting.
picture. The phone reads the countdown timer value
beginning with two or three and continuing to zero, when
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight Self
Timer.
the picture is taken.
Tip: To stop the countdown timer without resetting it, press
In camera mode, press the Options soft key. The options
menu bar appears in the display.
the following Self Timer options:
Timer icon appears in the camera screen in the display.
.
Multi Shot lets you take multiple pictures in succession at the
touch of a key.
Use the Up and Down navigation keys to highlight one of
• Off
• 2 Sec.
• 5 Sec.
• 10 Sec.
4. Press
. If you select 2 Sec., 5 sec., or 10 sec., the Self
CLR
Multi Shot
1.
3.
, the countdown timer
2.
Use the Left and Right navigation keys to highlight Multi
3.
Use the Up and Down navigation keys to highlight one of
Shot.
the following Multi Shot options:
• Series Shot — Off / 3 pictures taken in succession / 5 pictures
taken in succession.
• Divided Shot — Off / 4 of the same new picture in a 2-by-2 array
/ 9 of the same new picture in a 3-by-3 array.
• Auto/Manual — Automatically takes pictures / You Manually take
the pictures.
Camera
66
4.
Press
to save the setting. The camera screen appears
1.
in the display.
menu bar appears in the display.
Note: When a Multi Shot option is set to a value other than Off, either a Series
Shot progress bar (
) or a Divided Shot icon (
)
appears in the viewfinder screen.
2.
, the camera takes several
pictures in rapid succession.
Quality
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight Quality.
3.
Use the navigation keys to highlight one of the Quality
Use the Left and Right navigation keys to highlight
Resolution.
3.
The next time you press
In camera mode, press the Options soft key. The options
Use the Up and Down navigation keys to highlight one of
the following Resolution options:
•
•
•
•
•
•
1280 X 960 (pixels)
640 X 480 (pixels)
320 X 240 (pixels)
176 X 144 (pixels)
160 X 120 (pixels)
Picture ID — lets you take pictures the correct size and resolution
for Contacts list picture IDs.
4. Press
. You’re returned to the camera viewfinder
screen.
options: Fine, Normal, or Economy.
4.
Press
. You’re returned to the camera viewfinder
screen.
Resolution
Change the size (in bytes) of your pictures using the Resolution
setting.
67
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 1280 X 960, zoom is not available. When Resolution is set to any
value lower than 1280 X 960, zoom settings 1 – 9 are available.
White Balance
White Balance allows you to adjust picture quality according to
available light.
1.
2.
3.
In camera mode, press the Options soft key. The options
The next time you press
menu bar appears in the display.
selected White Balance to your picture.
Use the Left and Right navigation keys to highlight White
Fun Tools
Balance.
Color Effects
Use the Up and Down navigation keys to highlight one of
the following White Balance options:
• Auto — The camera automatically adjusts picture quality to
available light.
• Sunny — Use this setting when taking pictures in full sun.
• Cloudy — Use this setting when taking pictures in cloudy
conditions.
• Tungsten — Use this setting when taking pictures under
incandescent lights.
• Fluorescent — Use this setting when taking pictures under
fluorescent lights.
Each option, as you highlight it, shows the effects it has on
When you decide on the White Balance you wish to use,
press
Change the look of your pictures with Color Effects. Choose from
nine available settings such as Antique, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight Fun
3.
Select Color Effects. The following options appear in the
Tools.
display:
Note: Choose Normal to disable Color Effects.
a picture.
4.
, the camera applies the
. The camera viewfinder screen appears in the
display with your selected White Balance applied.
•
•
•
•
•
Normal — Subjects and pictures appear with a normal hue.
Black&White — Subjects and pictures appear in black and white.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Antique — Subjects and pictures appear in a grayish-green hue.
Negative — Subjects and pictures appear in inverted colors.
Camera
68
• Green — Subjects and pictures appear in a greenish hue.
• Aqua — Subjects and pictures appear in an aqua hue.
• Cool — Subjects and pictures appear in a bright blue hue.
• Warm — Subjects and pictures appear in a reddish hue.
4. Select the desired Color Effect. You’re returned to the
4.
Fun Frames.
5.
Fun Frames
Fun Frames lets you temporarily apply one of the preloaded
picture frames in your phone to characterize or enhance one or
more pictures.
The next time you press
Settings
Memory
1.
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight Fun
3.
Select Fun Frames. A pop-up menu of the available Fun
Tools.
Frames appears in the display.
69
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
3.
In camera mode, press the Options soft key. The options
, the camera includes the
selected Fun Frame in your picture.
Note: The None frame is a blank frame.
1.
.
selected Fun Frame in place.
When you take your next picture, the phone’s display
Effect.
When you decide on the frame you wish to use, press
The camera screen appears in the display with your
camera viewfinder screen.
previews your subject image with the selected Color
Use the Up and Down navigation keys to show the various
Select Memory. The following Memory options appear in
the display:
• Phone — Stores pictures in phone memory.
• Card — Stores pictures on an optional microSD Memory Card.
4. Select the desired memory location. You’re returned to the
camera viewfinder screen.
Auto Save
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
• Guideline — Shows a cross hatch pattern in the view finder
screen.
• No Icons — Shows a nearly full-display subject image and without
icons.
4. Select the desired viewfinder display setting. You’re
Settings.
3.
Select Auto Save. The following options appear in the
display:
• Off
• On
4. Select the desired automatic save setting. You’re returned
returned to the camera viewfinder screen.
Metering
1.
menu bar appears in the display.
2.
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
3.
Select Icon Display. The following options appear in the
display:
• Display All — Shows camera icons as seen in “Camera Screen
Icons” on page 63.
Use the Left and Right navigation keys to highlight
Settings.
to the camera viewfinder screen.
Icon Display
In camera mode, press the Options soft key. The options
3.
Select Metering. The following options appear in the
display:
• Average — Adjusts exposure to the average light level over a large
picture area.
• Center — Adjusts exposure to the average light level over a center
portion of the subject.
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
4. Select the desired Metering setting. You’re returned to the
camera viewfinder screen.
Camera
70
When you take your next picture, the phone’s display
3.
previews your subject image with the measured exposure.
View Mode
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
display:
• Off
• On
4. Select the desired Night Shot setting. [If On, the Night Shot
icon (
Use the Left and Right navigation keys to highlight
Select View Mode. The following options appear in the
display:
• Landscape — Shows a wider, more panoramic view of the
subject.
• Portrait — Shows a narrower, more vertically oriented view of the
subject.
4. Select the desired View Mode setting. You’re returned to
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
1.
Night Shot
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
71
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
the camera viewfinder screen, which now shows the
selected view.
) appears in the viewfinder screen.] You’re
returned to the camera viewfinder screen.
Settings.
3.
Select Night Shot. The following options appear in the
Use the Left and Right navigation keys to highlight
Settings.
3.
Select Shutter Sound. The following shutter sounds
appear in the display:
•
•
•
•
Off
Shutter
OK
DingDong
4.
Select the desired shutter sound. You’re returned to the
camera viewfinder screen.
Reset Settings
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
3.
1.
In standby mode, press and hold the Camera key
(
Settings.
display. The message “Loading” appears in the display
Select Reset Settings. You are prompted to confirm reset
In camera mode, press the Options soft key. The options
menu bar appears in the display.
Use the Left and Right navigation keys to highlight
Camcorder, then press the
key. The Camcorder view
finder screen appears in the display.
). The camera viewfinder screen appears in the
followed by the camera view finder screen.
2.
• To reset the camera settings to default values, select Yes.
• To keep the current camera settings, select No.
Camcorder
2.
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video. To access Camcorder Options, do the
following:
Use the Left and Right navigation keys to highlight
of all camera settings.
1.
Camcorder Options
Press and hold the Camera key (
). The message
“Loading” appears in the display followed by the
camcorder viewfinder screen.
3.
Press the Options soft key. The following sub-menus
appear in the display:
•
•
•
•
•
•
•
Recording Mode
Self Timer
Quality
White Balance
Color Effects
Settings
Camera
Camera
72
4.
Use the Left and Right navigation keys to highlight the
desired option and/or setting, then press
selected setting.
Recording Mode
1.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
Select Recording Mode. The following options appear in
the display:
• Limit for MMS — Record videos that are a maximum of 15
seconds long. The videos can be included in video messages.
Note: Setting Recording Mode to Limit for MMS automatically sets Quality to
Economy.
• Normal — Record videos that are any length up, depending on
available memory.
3. Select the desired recording mode setting. The camcorder
screen reappears in the display.
Self Timer
Self Timer lets you delay taking a video long enough to let you
join others in the video.
73
1.
to save the
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
Select Self Timer.
3.
The following options appear in the display:
• Off
• 2 Sec.
• 5 Sec.
• 10 Sec.
4. Select the desired delay. The camcorder screen reappears
in the display.
The next time you press
, a countdown timer in the
display indicates the time remaining before the camcorder
starts recording the video. The phone reads the countdown
timer value beginning with two or three and continuing to
zero, when recording begins.
Tip: To stop the countdown timer without resetting it, press
CLR
.
Quality
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
Note: Quality is automatically set to Economy when you set Recording Mode
to Limit for MMS.
1.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight Quality.
3.
Select Fine, Normal, or Economy.
4.
You’re returned to the camcorder viewfinder screen.
• Sunny — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
3. Use the Up and Down navigation keys to show the various
White Balances and the effects they have on a video.
4.
viewfinder screen appears in the display with your
selected White Balance applied.
White Balance
White Balance allows you to adjust video quality according to
available light.
1.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight White
Balance. The name of the current White Balance setting
appears in the second line of the display. The options are:
• Auto — The camcorder automatically adjusts color balance to
available light.
Select the desired White Balance. The camcorder
The next time you press
, the camcorder applies the
selected White Balance to your video.
Color Effects
Change the look of your videos with Color Effects. Choose from
nine available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
Camera
74
2.
Select one of the following Color Effects:
3.
the display:
Note: Choose Normal to disable Color Effects.
• Normal — Subjects and pictures appear with a normal hue.
• Black&White — Subjects and pictures appear in black and white.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• Antique — Subjects and pictures appear in a grayish-green hue.
• Negative — Subjects and pictures appear in inverted colors.
• Green — Subjects and pictures appear in a greenish hue.
• Aqua — Subjects and pictures appear in an aqua hue.
• Cool — Subjects and pictures appear in a bright blue hue.
• Warm — Subjects and pictures appear in a reddish hue.
3. You’re returned to the camcorder viewfinder screen.
• Phone — Stores videos in phone memory.
• Card — Stores videos on an optional microSD Memory Card.
4. Select the desired memory location setting of your choice.
You’re returned to the camcorder viewfinder screen.
Auto Save
1.
Settings
Memory
1.
In camcorder mode, press the Options soft key. The options
2.
Use the Left and Right navigation keys to highlight
menu bar appears in the display.
75
Use the Left and Right navigation keys to highlight
Settings.
3.
Select Auto Save. The following options appear in the
display:
• Off
• On
4. Select the desired automatic save setting of your choice.
You’re returned to the camcorder viewfinder screen.
Icon Display
1.
Settings.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
When you record your next video, the phone’s display
previews your subject image with the selected color effect.
Select Memory. The following Memory options appear in
In camcorder mode, press the Options (right) soft key
(
). The options menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
3.
Select Icon Display. The following options appear in the
display:
• Display All — Shows camcorder icons as seen in “Camcorder
Screen Icons” on page 64.
• No Icons — Shows a nearly full-display subject image and without
icons.
4. Select the desired viewfinder screen setting. You’re
returned to the camcorder viewfinder screen.
Start Sound
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
1.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
3.
Select Start Sound. The following options appear in the
display:
• Off
• Look here
• 1,2,3!
4. Select the desired start sound. You’re returned to the
camcorder viewfinder screen.
End Sound
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
1.
In camcorder mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
3.
Select End Sound. The following options appear in the
display:
• Off
• OK
• Melody
4. Select the desired end sound. You’re returned to the
camcorder viewfinder screen.
Camera
76
Reset Settings
1.
2.
3.
䊳
and Right navigation keys to adjust the Zoom (the screen
menu bar appears in the display.
image enlarges to show the affects of your changes).
Use the Left and Right navigation keys to highlight
The next time you press
Settings.
enlarged picture or the camcorder takes an enlarged video
Select Reset Settings. You are prompted to confirm reset
according to your selected Zoom setting.
of all camcorder settings.
• Select the Yes option to reset the camcorder settings to default
values.
• Select the No option to keep the current camcorder settings.
Camera
1.
2.
, the camera takes an
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
䊳
In camera or camcorder viewfinder screen, use the Up
In camcorder mode, press the Options soft key. The options
and Down navigation keys to adjust the Brightness (the
menu bar appears in the display.
screen image lightens or darkens to show the affects of
Use the Left and Right navigation keys to highlight
your changes).
Camera, then press
The next time you press
. The Camera viewfinder screen
appears in the display.
Zoom
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (1 – 9) enlarges your pictures or videos (0 is
normal).
77
In camera or camcorder viewfinder screen, use the Left
In camcorder mode, press the Options soft key. The options
, the camera takes a lighter or
darker picture or the camcorder records a lighter or darker
video according to your selected Brightness setting.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1.
In the Camera viewfinder screen, press the My Images
soft key. Any pictures that you’ve saved appear in the
display.
Note: You can also access My Images by pressing MENU (
selecting Multimedia ➔ My Images.
2.
3.
), then
• Erase Files — Mark and erase selected unlocked image files.
• Picture Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
• Send With Bluetooth — Send a copy of this picture to another
Bluetooth device.
4. Select the desired option to perform the function for the
option or enter its sub menu.
Use the Navigation key to browse pictures in the gallery.
Press the Options soft key while viewing pictures in the
Gallery.
Switch From Expanded to Thumbnail Mode
1.
to view full size, then press
The following options appear in the display:
• Send — Send the currently displayed or highlighted picture as a
Picture message.
• Set As — Assign the currently displayed or highlighted picture to
be standby screen Wallpaper or as a Picture ID for someone in your
Contacts list.
• Slide Show — Show the pictures as a full screen slide show.
• Rename — Rename the currently displayed or highlighted picture.
• Move — Relocate the currently displayed or highlighted picture
from phone memory to a Memory Card or from a Memory Card to
phone memory.
• Lock / Unlock — Lock the currently displayed or highlighted
image so that it cannot be deleted, or unlock the image so that it
can be deleted.
Use the Navigation key to highlight a picture that you wish
2.
.
To return to the thumbnail view of your photos, press
again.
The Video Gallery
Saved videos are stored in the My Videos folder. You can view the
videos one at a time (expanded mode), or browse several videos
at once in thumbnail format.
1.
In the Camcorder viewfinder screen, press the My Videos
soft key. Any videos that you’ve saved appear in the
display.
Note: You can also access My Videos by pressing MENU (
Multimedia ➔ My Videos.
), then select
Camera
78
2.
3.
Use the Navigation key to browse videos in the gallery.
Press the Options soft key while viewing videos in the
gallery. The following options appear in the display:
• Send — Send the currently displayed or highlighted video as a
Video message.
• Set As — Assign the currently displayed or highlighted video to be
the Main standby screen Wallpaper.
• Rename — Rename the currently displayed or highlighted video.
• Move — Relocate the currently displayed or highlighted video from
phone memory to a Memory Card or from a Memory Card to phone
memory.
• Lock / Unlock — Lock the currently displayed or highlighted video
so that it cannot be deleted, or unlock the video so that it can be
deleted.
• Erase Files — Mark and erase selected unlocked video files.
• Video Info — View the Name, time and date created, resolution,
size, and duration of the currently highlighted or displayed video.
4. Use the Navigation key to highlight the desired option.
Press
1.
Use the Navigation key to highlight a
video that you wish to play full size,
press
. The media player
launches and begins playing the
selected video.
2.
Press the Up navigation key to return to the thumbnail view
of your videos.
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
1.
In standby mode, press and hold the Camera key (
)
to activate the camera.
Press and hold the Camera key (
) a second time to
activate the camcorder.
to perform the function for the option or enter its
sub menu.
79
Switch From Expanded to Thumbnail
Mode
Note: To record a video for inclusion in a Video Message, the camcorder
Recording Mode option must be set to Limit for MMS. (For more
information, refer to “Recording Mode” on page 73)
2.
Using the display as a viewfinder, take the desired picture
or record the desired video by pressing
To stop video recording, press
3.
Press Send (
.
a second time.
). The picture or video is saved
automatically, and the Create Pic Msg or Create Video
Msg screen appears in the display.
4.
Enter the recipient’s phone number or e-mail address
using the keypad.
5.
Press
to save the address(es) and move to the
Subject field. Use the Navigation key to move to the other
message fields. (For more information, refer to
“Messaging” on page 46).
6.
When you are finished composing your message, press
SEND (
) to send the Picture or Video message to the
intended recipients.
Camera
80
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
1.
In standby mode, press MENU (
2.
menu.
3.
), then select
• Camera — Lets you launch and set up your phone’s camera. (For
more information, refer to “Camera” on page 60.)
• Camcorder — Lets you launch and set up your phone’s
camcorder. (For more information, refer to “Camera” on
page 60.)
• Music Player — Lets you play and manage music files stored on
a memory card.
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• My Videos — Lets you choose the videos that appear in your
phone’s display.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms,
and other alerts.
81
Press
to launch the highlighted sub-menu. The
following sections describe the above listed sub-menus in
Multimedia. The following Multimedia sub-menus appear
in the display:
Use the Up and Down navigation keys to highlight a sub-
greater detail.
Music Player
Music Player lets you play downloaded music files (MP3) stored
on a Memory Card.
Launching the Music Player Library Menu
1.
From the Multimedia menu,
select Music Player.
The Library screen appears in
the display, showing the
following music lists:
• All — Lists all music files on the
Memory Card and lets you play
individual music files or play
multiple music files by creating a
temporary music playlist.
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Genres — Lists music categories for music files on the Memory
Card and lets you play one or more music files of a particular music
category.
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
2. Use the Up and Down navigation keys to highlight a music
list, then press VIEW (
3.
).
Use the Up and Down
navigation keys to highlight a
music file, then:
• Press the Play soft key to play
the file.
• Press MARK ( ) to select one
or more files for playing or other
options.
• Press the Options soft key to
select and apply any of the
following options to the highlighted or marked music files(s):
– Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
– Remove — Deletes marked music file(s) from the Memory Card.
– Properties — Lists the title, artist, album, genres, copyright
information, time length, file size, and bit rate of the highlighted music
file.
– Player Settings — Lets you assign a particular playback visual to, and
view Memory Info for, highlighted or marked music file(s).
Select the desired option.
Playing Music
1.
From the Multimedia menu,
select Music Player.
The Library screen appears
in the display, showing the
following music lists:
•
•
•
•
•
All
Artists
Albums
Genres
Playlists
Multimedia
82
2.
Use the Navigation key to
highlight the desired option,
press VIEW (
), and then
do one of the following:
• All option — Use the Up/Down
navigation keys to highlight a
music file, then press the Play
soft key to play the file.
Tip: To play additional files, highlight and
Mark additional files for playback. (For
more information, see “Launching the Music Player Library Menu” on
page 81.)
• Other options — Use the Up/Down navigation keys to highlight an
Artist, Album, Genre, or Playlist, then press VIEW ( ).
Use the Up/Down navigation keys to highlight a music file, then press
the Play soft key to play the file.
The Music Player screen appears in the display and the
selected music file/playlist begins playing.
Music Player Controls
• Volume key:
– To play a music file louder, press the Volume key Up.
– To play a music file softer, press the Volume key Down.
83
• Navigation key:
– To pause/resume playing a music file, press
.
Note: With the flip closed, use the Camera key to pause/resume playing a
music file.
– To stop playing a music file, press the Down navigation key.
– To skip play to an earlier music file in the selected list, press the Left
navigation key.
To skip to an earlier portion of this music file, press and hold the Left
navigation key.
– To skip play to a later music file in the selected list, press the Right
navigation key.
To skip to an later portion of this music file, press and hold the Right
navigation key.
– To return to the selected list and choose another music file to play,
press the Up navigation key.
• Library soft key — Returns you to the Library screen.
• Options soft key — Shows the following sub-menus and options:
– Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, Repeat All, or Shuffle Repeat All.
– Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
– Remove — Deletes the selected music file from the Memory Card
– Properties — Lists the title, artist, album, genre, copyright
information, time length, file size, and bit rate of the highlighted music
file.
– Visualizer — Lets you change the Music Player visualization to Simple
View, Equalizer, Album Art, or Lyrics.
– Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
Tip: You can also access My Images from:
-The Camera screen, by pressing the My Images soft key.
-The Edit Contact screen, by selecting the picture ID field and pressing
the Set soft key.
2.
Select the desired option or sub-menu.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper) and as picture
IDs for your contacts.
1.
From the Multimedia menu, select My Images.
If there are no pictures stored in your phone or on a
memory card, “No Image” appears in the My Images
screen. [To launch the camera to take a picture, press the
Camera soft key. (For more information, refer to “Camera”
on page 60.)]
If there are pictures stored in your phone or on a memory
card, up to four thumbnail images of your pictures appear
in the display.
Use the Navigation key to highlight a picture.
To expand the selected picture to fill the screen, press
3.
Press the Options (right) soft key (
.
). A pop-up
menu containing the following options appears in the
display:
• Send — Lets you send the selected image to a specified recipient
in a Picture message.
• Set As — Lets you assign the selected picture as the Main
Wallpaper or as the Picture ID for a Contact.
• Slide Show — Shows the available images as a sequence of fullscreen pictures.
• Rename — Lets you rename the picture.
• Move — Lets you move the picture from the phone to the memory
card or from the memory card to the phone.
• Lock / Unlock — Lets you protect the picture from being deleted.
• Erase Files — Erases one or more selected, unlocked pictures.
Multimedia
84
• Picture Info — Displays information about the picture, such as
the picture Name, creation Date and Time, Resolution, and the
data Size.
• Send With Bluetooth — Lets you send a copy of the picture to
another Bluetooth device.
4. Select the desired option.
• To return to the previous menu, press CLR .
• To return to standby mode, press
.
My Videos
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
1.
From the Multimedia menu, select My Videos.
If there are no videos stored in your phone or on a memory
card, “No Video” appears in the My Videos screen.
If there are videos stored in your phone or on a memory
card, up to four thumbnail images from your videos appear
in the MY VIDEOS screen.
2.
To take a new video, press the Video soft key. The
camcorder view finder screen appears in the display. (For
more information, refer to “Camcorder Screen” on
page 64.)
85
3.
To play a video, use the navigation keys to highlight a
video, then press PLAY (
4.
).
For more My Videos options, press the Options soft key.
The following options appear in the display:
• Send — Lets you send the selected video to a specified recipient
in a Video message.
• Set As — Lets you assign the selected video as the Main
Wallpaper.
• Rename — Lets you change the name of the video.
• Move — Lets you move the video from the phone to the memory
card or from the memory card to the phone.
• Lock / Unlock — Lets you protect the video from being deleted.
• Erase Files — Erases one or more selected, unlocked videos.
• Video Info — Displays information about the video, such as the
video Name, creation Date and Time, Resolution, data Size, and
the Duration.
5. Select the desired option.
• To return to the previous menu, press CLR .
• To return to standby mode, press
.
Playing Videos
1.
From the Multimedia menu, select My Videos.
Up to four thumbnail images from your videos appear in
the My Videos screen.
2.
– To return to My Videos and choose another video to play, press the Up
navigation key.
My Ringtones
Use the Navigation key to
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
highlight a video that you wish
to play full size, then press
. The media player
1.
launches and begins playing
ringtones appears in the display.
the selected video.
Media Player Controls
Tip: You can also access My Ringtones from:
• Volume key:
– To play video sound louder, press the
Volume key Up.
– To play video sound softer, press the Volume key Down.
• Navigation key:
– To pause/resume playing a video, press
From the Multimedia menu, select My Ringtones. A list of
.
Note: With the flip closed, use the Camera key to pause/resume playing a
music file.
– To stop playing a video, press the Down navigation key.
– To skip play to an earlier part of this video, press and hold the Left
navigation key.
– To skip play to a later part of this video, press and hold the Right
navigation key.
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
-The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Ringtones.
2.
Use the Navigation key to highlight a particular ringtone.
• To PLAY the ringtone, press
.
• To show the file name and file type, press the Options soft key.
3. Press the Set As soft key to assign the highlighted
ringtone. The following options appear in the display:
• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
Multimedia
86
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
• Alert Tone — Lets you assign the selected ringtone to All
Messages, Text Message, Picture/Video Message, or
Voicemail Msg.
Select the desired option.
4.
When using a downloaded ringtone, press the Options soft
Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds.
-The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Sounds.
Note: Recorded sound files (voice memos) do not appear in these lists.
key and the following options appear in the display:
•
•
•
•
Lock / Unlock — Lets you prevent/permit file deletion.
Erase — Erases the selected file.
Rename — Lets you rename the selected file.
Ringtone Info — Displays information about the selected file,
such as the file name, the file type, and the data size.
Select the desired option.
5.
To return to the previous menu, press
standby mode, press
CLR
. To return to
.
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
1.
From the Multimedia menu, select My Sounds. Record
New and a list of sound files appears in the display.
87
2.
Use the Navigation key to highlight the Record New
option, then press
to record a voice memo. (For more
information, refer to “Voice Memo” on page 88.)
3.
Press the Options soft key.
• For a recorded sound file, a pop-up menu containing the following
options appears in the display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Erase All — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
file name, file size, file type, date, and time.
• For a preloaded sound file, a pop-up menu containing the following
options appears in the display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Erase All — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
file name, file type, and the data size.
• For a downloaded sound file, the following options appear in the
display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Erase All — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
file name, file type, and the data size.
Select the desired option.
4.
To return to the previous menu, press
standby mode, press
.
CLR
Voice Memo
You can use your phone to record voice memos for later
playback.
Note: The maximum length for a single voice memo is 60 seconds.
You can save as many voice memos as will fit in the empty
memory capacity.
Record a Voice Memo
1.
From the Multimedia menu, select My Sounds ➔ Record
New. The Record New screen appears in the display.
2.
Press REC (
), then start speaking. As it is recording the
phone displays a countdown timer that shows the seconds
remaining for the recording.
• To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
3. Once you’re finished recording, press SAVE (
). The
new recording is saved, and the standby mode screen
appears in the display.
. To return to
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
1.
From the Multimedia menu, select My Sounds. A list of
Multimedia
88
2.
sound files appears in the display.
2.
Use the Navigation key to highlight the voice memo you
3.
wish to review.
3.
To play the voice memo, press PLAY (
Press the Options soft key. The following options appear in
the display:
).
• To stop the memo, press STOP ( ).
• To restart playing the memo, press
again.
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
Erase One Voice Memo
• Send — Lets you send a copy of this voice memo as part of a
picture message.
• Rename — Lets you change the name of this voice memo.
• Lock/Unlock — Blocks/permits erasure of this voice memo.
• Erase all — Erases all unlocked sound files that are not preloaded.
• Sound Info — Shows you the Name, Size, Type, Date, and Time
for this sound file.
4. Select Erase all. “Erase All Sounds?” appears in the
1.
From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
display.
2.
Use the Navigation key to highlight the voice memo you
• To erase all unlocked sound files, press the Yes soft key.
• To return to the list of sound files, press the No soft key.
wish to erase.
3.
Press the Erase soft key. “Erase Sound?” appears in the
display.
• To erase the selected voice memo, press the Yes soft key.
• To return to the list of sound files, press the No soft key.
Erase All Voice Memos at One Time
1.
From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
89
Use the Navigation key to highlight a voice memo.
Section 12: Tools/Utilities
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
Tools/Utilities Menu
Tools is a suite of Personal Information Management (PIM)
applications such as a Calendar, To Do List, and Memo Pad that
run on your phone. You can use your phone to schedule events,
set reminders, create a to do list, perform calculations, and more
with the functions provided by this useful feature.
Opening Tools/Utilities Menu
1.
In standby mode, press MENU (
• Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
• Stop Watch — Lets you view the amount of time.
• Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
• Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of key presses.
2. Select the desired tool.
The following sections provide detailed descriptions of the
), then select Tools/
Utilities. The following sub-menus appear in the display:
• Bluetooth — Lets you access Bluetooth functions.
• Calendar — Lets you view the current, past, or future month in a
monthly calendar layout.
• Memo Pad — Lets you store and review useful information.
• Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
• World Time — Lets you view the current time of day or night in
another part of the world.
tools and how to use their functions.
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
Tools/Utilities
90
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
3.
Bluetooth icon (
Add New Device
To search for available Bluetooth devices:
1.
From the Tools/Utilities menu, select Bluetooth. The
the display.
4.
Place the Bluetooth device in discoverable mode. (For
more information, see the device user manual.)
5.
Press
. “Searching” appears in the display, followed by
the names of the available devices appears in the display.
6.
Use the Up and Down navigation keys to highlight the
device you want to pair with your phone.
7.
Press PAIR (
) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
following options appear in the display:
• Add New Device
• Registered List
• Bluetooth Settings
2. Select Add New Device.
the selected device.
Note: When pairing you phone with another Bluetooth device other than a
headset or headphones, the same passkey or PIN must be entered on
both devices (when prompted) for the pairing to succeed.
8.
If Bluetooth is off, you are prompted to “Turn bluetooth
Enter the device passkey or PIN and press
. You are
prompted to connect to the paired device.
power on?”.
9.
Press Yes (
). “Connecting” followed by the blue
Bluetooth icon (
91
) appears in the display. “Place device
you are connecting to in discovery mode” also appears in
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
Press the Yes soft key to turn Bluetooth on. The black
) appear in the display.
Registered List
Supported Profiles
This menu provides a list of Bluetooth wireless technology
devices discovered by your handset.
1.
From the Tools/Utilities menu, select Bluetooth ➔
Registered List.
Lists and explains the Bluetooth profiles your phone supports.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
Calendar
Connecting to a Bluetooth Device
From the Bluetooth Menu,
1.
Highlight the desired device and press
2.
If you are unable to pair with the device a pop-up appears
.
in the display. To retry, press the Yes soft key.
Bluetooth Settings
Enable/Disable
Selecting this option turns Bluetooth on or off.
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device for 1 minute, or Off for no visibility.
Device Name
Shows the handset name. To change this name enter the desired
text and press
.
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
View an Event
1.
From the Tools/Utilities
menu, select Calendar.
A calendar appears in the
display with the current date
highlighted. The month and
year also appear.
• Press the Add soft key to add an
event to the highlighted date.
• Press the key to open the
highlighted date.
Tools/Utilities
92
2.
Use the following keys to move around within the calendar:
• Press the Volume key Up ( ) to view previous months.
• Press the Volume key Down ( ) to view future months.
• Use the Navigation key to move to an individual day, one day or one
week at a time.
• Press the Options soft key while viewing the calendar. The
following options appear in the display:
– Go to Date — Lets you jump to any date you specify.
– Go to Today — Lets you jump to the current date.
– Erase Old — Lets you erase past events.
– Erase all — Lets you erase all events.
Use the Navigation key to highlight the desired option, then press the
key to select the highlighted option and perform the related
process.
Add a New Event
1.
and End dates and times fields.
6.
Enter the Start and End dates and times for the event using
the keypad. Enter the dates and times for the event using 2
digits for day, month, hour, and minute entries. Use 4 digits
for year entries.
7.
Use the Left and Right navigation keys to change between
AM and PM, or press
8.
abc
for AM or press
pqrs
for PM.
When you’re finished entering the dates and times, use the
Up and Down navigation keys to highlight the Alert field.
Use the Left and Right navigation keys to select a type of
alert.
9.
Use the Up and Down navigation keys to highlight the
Reminder field. Use the Left and Right navigation keys to
Use the Navigation key, Volume key, or the Go to Date
select the Reminder off or to select a reminder interval.
Press the Add soft key. The New Event screen appears in
the display.
93
Use the Up and Down navigation keys to highlight the Start
highlighted. The month and year also appear.
option to highlight the date of the new event.
3.
Enter a name for the event. (For more information, refer to
“Entering Text” on page 30.)
5.
From the Tools/Utilities menu, select Calendar.
A calendar appears in the display with the current date
2.
4.
10. Use the Up and Down navigation keys to highlight the Alert
6.
Time field. Use the Left and Right navigation keys to select
the amount of time before the event occurs that you wish
navigation keys.
7.
to be notified by an alert.
11. Press
to store the event in your calendar. If you set a
To edit details of an event:
8.
View, Edit, and Erase Events
name highlighted.
Use the Navigation key, Volume key, or the Go to Date
option to highlight the date of an event. The number of
events for this date appears at the bottom of the Calendar
screen.
Press VIEW (
Highlight the desired event, then press VIEW (
To erase an event:
10. While viewing the events list for this date, highlight the
event you wish to delete.
12. Press the Options soft key and select Erase. You are
prompted to confirm the erasure.
). The
event details appear in the display.
5.
Follow Steps 4 – 11 of “Add a New Event” on page 93, as
11. If desired, view the event details.
). A list of events for this date appears.
To view details of an event:
4.
9.
needed.
highlighted. The month and year also appear.
3.
While viewing the event details, press the Edit soft key. The
Edit – Event screen appears in the display with the event
From the Tools/Utilities menu, select Calendar.
A calendar appears in the display with the current date
2.
To return to the Calendar, press the Options soft key and
select Month View.
notification alert, an alert will notify you prior to the event.
1.
To view another event for this date, use the Left and Right
• To retain the event, press the No soft key.
• To erase the event, press the Yes soft key.
Use the Up and Down navigation keys to scroll through the
list of event details.
Tools/Utilities
94
Memo Pad
4.
Edit the memo using the keypad. (For more information,
refer to “Entering Text” on page 30.)
Note: You can’t prioritize or set an alert for stored notes.
5.
Add a Memo
1.
From the Tools/Utilities menu, select Memo Pad.
2.
If you have any stored memos, they appear as a list in the
add a new memo.
3.
Enter a memo using the keypad. (For more information,
refer to “Entering Text” on page 30.)
4.
When you’re finished entering details for the memo, press
. The memo is saved.
View, Edit, and Erase Memos
95
1.
From the Tools/Utilities menu, select Memo Pad.
2.
Use the Navigation key to highlight a memo.
3.
To view the memo, press VIEW (
).
To erase the memo you are viewing, press the Options soft
key, then select Erase. You are prompted to verify the
erasure.
• To keep the memo, press the No soft key.
• To erase the memo, press the Yes soft key.
display. If this is your first time in Memo Pad, “No
Memos” appears in the display. Press the Add soft key to
To edit the memo you are viewing, press the Edit soft key
or press the Options soft key, then select Edit.
You can create a notes and store them in Memo Pad. Return to
Memo Pad anytime you wish to review and edit your notes.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
1.
From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2.
When an Alarm Sounds
Select the desire Alarm. A Set
Alarm screen appears in the
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
display containing the
following options:
• Alarm — Turns the alarm Off or
On.
• Time — Use the numeric keys to
enter the time, and use the Left
and Right navigation keys to
select AM or PM.
• Frequency — Lets you repeat the alarm Daily, Mon – Fri,
Weekends, or Once.
• Ringer — Lets you set the alarm ringer to a Tone or to Vibrate, and
lets you select a particular Tone.
Use the Up and Down navigation keys to select options,
and use the Left and Right navigation keys to select values
for the options.
Use the keypad to enter the time for the alarm.
3.
When you’re finished entering the time for the alarm, Press
. The alarm is set and the alarm icon (
the top of the display.
) appears in
䊳
Use the navigation keys to highlight Dismiss, then press
to silence the alarm.
• If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
• If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in
the top of the display.
• If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Disabling Alarms
Turn Off the Alarm
Turning an Alarm to Off allows you to retain the current settings
for later reuse.
1.
From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
• Alarm 1
• Alarm 2
Tools/Utilities
96
2.
• Alarm 3
Use the Up and Down navigation keys to highlight an active
Press the Options soft key and select Off.
Reset the Alarm(s)
1.
From the Tools/Utilities menu, press
ghi
for Alarm
Clock. The following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Use the navigation keys to highlight an active Alarm
selection.
3.
Press the Options soft key. The following options pop-up
in the display:
• On / Off — Enables/disables the highlighted Alarm using the
current settings.
• Reset Alarm — Disables the highlighted Alarm and resets its
settings to default values.
• Reset All — Disables all Alarm and resets all of their settings to
default values.
97
Select Reset Alarm or Reset All. The highlighted Alarm or all
Alarms are reset to Off.
World Time
Alarm selection.
3.
4.
World Time lets you view the time of day or night in another part
of the world. World Time displays time in any of 45 different cities
and/or time zones around the world.
1.
From the Tools/Utilities
menu, select World Time. A
world map appears in the
display.
2.
Use the Left and Right
navigation keys to display the
time zone and city that you
wish to view.
The following time zones/cities are supported:
EST/EDT:
Caracas
Brasilia
Mid Atlantic
Detroit
Washington
D.C
New York
Montreal
Boston
Cape Verde
MST/MDT:
CST/CDT:
Denver
Arizona
Dallas
Chicago
Houston
Mexico City
3.
Press the Options soft key select to display (DST On) or
not display (DST Off) Daylight Savings Time (DST) for the
London
Paris
selected time zone.
Rome
Berlin
Athens
Helsinki
Jerusalem
Moscow
Baku
Abu Dhabi
Tashkent
Alma-Ata
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Guam
Sydney
Okhotsk
Wellington
Samoa
Midway
HAST/HADT:
AKST/AKDT:
PST/PDT:
Honolulu
Hawaii
Alaska
Seattle
San Francisco
Los Angeles
4.
Do one of the following:
• Press to set the selected time zone as the home time zone for
your phone.
• Press CLR to return to the Tools/Utilities menu.
Calculator
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
Tools/Utilities
98
1.
From the Tools/Utilities
For additional equation entry options, press the Operator
menu, select Calculator. The
soft key. The following options appear in the display:
Calculator appears in the
display.
2.
Enter the first number in your
equation using the keypad
• ( — Beginning of nested equation
• ) — End of nested equation
• Power — Raise the entered number to a power
5. Press
to perform the calculation and view the result.
(numbers can be up to nine
digits long).
• Press + to enter a decimal point. (Calculator only accepts 3 digits
after a decimal point.)
• Press
to change the sign for a number to a negative.
3. Use the navigation keys to set the type of calculation that
you wish to perform. Your choices are as follows:
• Up navigation key — [x] Multiplication
• Left navigation key — [-] Subtraction
• OK key — [=] Equals/Total
• Right navigation key — [+] Addition
• Down navigation key — [÷] Division
4. Use the keypad to enter the second number into your
equation.
To perform another calculation, press the Clear soft key.
Stop Watch
You can use this menu to set a stop watch.
1.
From the Tools/Utilities
menu, select Stop Watch.
2.
Press
3.
Press the Record soft key at
the start of each succeeding
event/lap to record the
completion time for the
previous event/lap.
4.
Press the Reset soft key to erase all stop watch (lap) times
recorded.
99
to start, stop, and
resume the stopwatch count.
Converter
Currency — Reviewing/Editing Exchange Rates
The conversion menu provides the
following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1.
menu, select Converter ➔
Currency.
2.
1.
From the Tools/Utilities menu, select Converter.
2.
Select the conversion feature you wish to use.
3.
Use the Navigation key to select the units to be converted
From and To.
Enter the quantity you want converted in the From field.
the display.
3.
currency to be converted From.
4.
To change a exchange rate, press EDIT (
5.
Use the Up and Down navigation keys to highlight the
).
Exchange Rate to be reviewed/changed.
6.
+
Use the Left and Right
navigation keys to select the
The converted quantity appears in the To field.
Note: To include a decimal point, press
Press the Rate soft key. The
Exchange Rate list appears in
To convert a currency, length, weight, volume, area, or
temperature, do the following:
4.
From the Tools/Utilities
.
Change the current exchange rate, as needed. (For more
information, refer to “Entering Numbers” on page 32.)
7.
Press
8.
Press
to save the changed exchange rate.
CLR
to return to the Currency Converter screen.
Tools/Utilities
100
Currency — Adding Exchange
Rates
You can use the Currency Converter
to convert from and to obscure
currencies by adding exchange rates
for these currencies. To add a
currency and its exchange rate to
the Currency Converter, do the
following:
1.
From the Tools/Utilities
5.
field.
6.
Press the Rate soft key. The Exchange Rate list for the
“Entering Text” on page 30.)
7.
8.
appears in the display with the
Base field highlighted.
Use the Left and Right
navigation keys to select the
Base currency to be
converted from.
101
Enter a decimal exchange rate for the new currency using
the keypad.
Note: Press
+
to enter the decimal point.
The Exchange Rate field only accepts two digits after the decimal
point.
Press the Add soft key. The
Add Exchange Rate screen
4.
Press the Down navigation key to highlight the Exchange
Rate field.
From currency appears in the display.
3.
Enter an identifier of up to 5 characters for the new
currency using the keypad. (For more information, refer to
menu, select Converter ➔ Currency.
2.
Press the Down navigation key to highlight the Currency
9.
Press
to save the new exchange rate.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1.
From the Tools/Utilities menu, select Converter ➔
Currency.
2.
3.
Press the Rate soft key. The Exchange Rate list for the
1.
menu, select Tip Calculator.
Use the Up and Down
The Tip Calculator screen
navigation keys to highlight
appears in the display with the
Bill field highlighted.
the currency exchange rate to
be erased.
4.
2.
Use the keypad to enter the
total amount of the bill.
Press the Erase soft key. You
are prompted to confirm the
3.
erasure.
5.
From the Tools/Utilities
From currency appears in the display.
If needed, press the Down
navigation key to highlight the Tip field.
Press the Yes soft key to
4.
Use the keypad to enter a tip percentage.
erase the selected exchange rate or press the No soft key
5.
If needed, press the Down navigation key to highlight the #
to return to the Exchange Rate list.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Paying field.
6.
Use the keypad to enter the number of persons paying.
7.
The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
Tools/Utilities
102
Section 13: Voice SVC
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
Launching Voice SVC
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
1.
In standby mode, press MENU (
), then select Voice
SVC. The following options appear in the display:
• Voice Commands—Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. Also see “Making a Call — Voice Dialing” on
page 20 and “Voice Method” on page 37 for more information.
• Voice Settings—Lets you customize VoiceSignal to better
respond to your voice and your phone use preferences.
2. Use the Up and down navigation keys to highlight the
desired sub-menu, then press
.
Voice Commands
To start VoiceSignal, do one of the following:
• In standby mode, press the
key.
103
• From the Voice SVC menu, select Voice Commands.
“Say a Command” appears in the display and plays through the
earpiece, followed by a list of available commands.
Note: You can also set your phone to start VoiceSignal when you open the
phone. For more information, refer to “Voice Launch” on page 106.
VoiceSignal includes the following commands:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
the digits in the number. (For more information, refer to “Making a
Call — Voice Dialing” on page 20.)
• Send Text — Lets you launch the Create Text Msg screen. (For more
information, refer to “Creating and Sending a Text Message” on
page 46.)
• Send Picture — Lets you launch the Create Pic Msg screen. (For more
information, refer to “Creating and Sending a Picture Message”
on page 47.)
• Lookup — Lets you look up and display contact information for any
name stored in your Contacts list by saying the name. (“Finding a
Contacts Entry” on page 37.)
• Go to — Lets you access the Voice Memo, Calendar, and Contacts List
features of your phone. (For more information, refer to “Voice Memo”
on page 88, “Calendar” on page 92, and “Your Contacts List” on
page 34.)
• Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and
cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voiceactivates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way VoiceSignal uses choice lists:
1.
From the Voice SVC menu, select Voice Settings ➔
Choice Lists the following options appear in the display:
• Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
Voice SVC
104
2.
• Always Off—VoiceSignal never displays a choice list.
Select the preferred setting.
From the Voice SVC menu, select Voice Settings ➔
Sensitivity. The Sensitivity screen appears in the display.
2.
Use the Up and Down navigation keys to adjust the
Sensitivity setting to Reject More spoken commands or
names or to Reject Less spoken commands or names.
3.
Press
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
Sensitivity
1.
• Make sure you wait for the beep before starting to speak.
to accept the new setting.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
From the Voice SVC menu, select Voice Settings ➔ Digit
Dialing ➔ Adapt Digits. Your phone displays the first digit
sequence and “Please say” plays through the speaker.
2.
Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
• Use Adapt Digits in a quiet place.
105
recording and prompts “Did the recording sound ok?”
• If the recording was good, say “Yes.”
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
3.
4.
After confirming that the recording sounds “ok”, continue
Sound. The following options appear in the display:
•
•
•
•
Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
From the Voice SVC menu, select Voice Settings ➔ Digit
Dialing ➔ Reset Digits. The phone prompts you to
confirm digit adaptation rest.
2.
To reset your digit adaptation, press the OK soft key. To
cancel and retain your digit adaptation, press the Back
soft key.
3.
From the Voice SVC menu, select Voice Settings ➔
After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
5.
1.
the recording process with the next set of digits.
Press
to save and exit.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
Prompts — Enables or disables audio prompts.
Digits — Enables or disables audio digit playback.
Names — Enables or disables audio name playback.
Name Settings — Lets you adjust the Speed and Volume of your
phone’s audio name playback.
2. Select or adjust to the desired setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1.
From the Voice SVC menu, select Voice Settings ➔ Voice
Launch. The following options appear in the display:
• Key Only — Press and hold
to activate VoiceSignal for one
call.
• Key / EarMic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset. Press
to release VoiceSignal.
• Key / Flip — Press the
key to activate VoiceSignal for
repeated calls. Open and close the flip to make and end calls using
VoiceSignal. Press
to release VoiceSignal.
2. Select the desired setting.
Voice SVC
106
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
䊳
From the Voice SVC menu, select Voice Settings ➔
About.
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
107
Section 14: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
2.
Accessing Your Settings
䊳
To access your phone’s settings from standby mode, do
one of the following:
• Press the Settings soft key.
• Press MENU ( ), then select Settings.
The Settings menu appears in the display.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
1.
At the Settings menu, select Location.
The following options appear in the display:
• Location on — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
Select the preferred setting. You’re returned to the
Settings menu.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
1.
At the Settings menu, select Display Settings. The
following options appear in the display:
• Menu Style — Lets you choose whether the Main Menu appears
as a matrix of icons or as a list of menus.
• Wallpaper — Lets you choose the picture(s) that display(s) on
your phone when in standby mode.
• Clock Format — Lets you choose whether to show the time in the
display in digital or analog format.
• Theme — Lets you select the main menu color scheme.
• Dialing Font — Lets you choose how the number will display on
the display screen.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
Changing Your Settings
108
• Backlight — Lets you set backlight options for the LCDs, keypad,
and set the brightness.
• Front Contrast — Lets you set contrast level for the Front (Sub)
LCD.
2. Use the Up and Down navigation keys to highlight a submenu.
3.
Press
to enter the highlighted sub-menu. The
following sections describe the above listed display submenus in greater detail.
Menu Style
1.
Wallpaper. The following options appear in the display:
• My Images — Choose a picture to appear in the display when the
phone is in standby mode.
• My Videos — Choose a video to appear in the display when the
phone is in standby mode.
• Preset Images — Choose a preset image to appear in the display
when the phone is in standby mode.
2. Select the desired sub-menu. Up to four pictures, images,
or videos appear in the display.
3.
Menu Style allows you to choose how main menus appear in your
display.
1.
At the Settings menu, select Display Settings ➔ Menu
Settings menu.
Wallpaper
Wallpaper lets you choose the pictures that appear in your
phone’s display while in standby mode.
109
Use the Navigation key to highlight a picture, image, or
video.
4.
Press the View soft key to expand/contract the highlighted
picture, image, or video.
Style. The following options appear in the display:
• Icon — Display main menus as icons.
• List — Display main menus in a list format.
2. Select the preferred setting. You’re returned to the Display
At the Settings menu, select Display Settings ➔
5.
Press
to set the highlighted picture, image, or video to
display when the phone is in standby mode. You’re
returned to the Wallpaper menu.
Clock Format
Clock Format lets you choose whether to show the time in the
display in digital or analog format.
1.
At the Settings menu, select Display Settings ➔ Clock
Format. The following options appear in the display:
• Digital — Large numerical time and date display
• Analog — 12-hour clock face with moving hour and minute
hands
• Off — Default small digital time and date display
2. Select the preferred setting. You’re returned to the Display
Settings menu.
Theme
Theme lets you select the color scheme your phone uses to
highlight menu items and scroll bar positions.
1.
At the Settings menu, select Display Settings ➔ Theme.
The following options appear in the display:
Dialing Font
Dialing Font adjusts the color of display.
1.
At the Settings menu, select Display Settings ➔ Dialing
Font. The following options appear in the display:
• Style — Sets font (Normal, Quill Pen, Sticky, or Color Dial)
used to show dialed numbers.
• Size — Sets size (Normal or Large) of the Style font used to show
dialed numbers.
2. Select the preferred setting. You’re returned to the Dialing
Font menu.
Banner
Create your own personalized text greeting that appears in the
display while your phone is in standby mode.
1.
At the Settings menu, select Display Settings ➔ Banner.
The Banner text entry screen appears in the display.
Note: If necessary, press and hold
2.
CLR
to erase an existing banner.
Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 30.)
2.
Select the preferred Theme. You’re returned to the Display
Settings menu.
3.
Press
to save the new banner.
Changing Your Settings
110
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Front Contrast
Set the Front (Sub) LCD contrast to your preference.
1.
Contrast. The Front Contrast screen appears in the
Note: Prolonged backlight use drains your battery faster.
1.
At the Settings menu, select Display Settings ➔
Backlight. The following sub-menus appear in the display:
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 7, 15, and 30
Seconds and Always On (this setting uses much more power than
the timed settings) and Always Off.
• Brightness — Use the Left and Right soft keys to select between
any of 5 optional settings.
• Sub LCD — Use the Up and Down navigation keys to select the
foreground color for the Sub (Front) LCD) between any of 8 optional
settings.
2. Select a sub-menu and setting. You’re returned to the
Backlight menu.
111
At the Settings menu, select Display Settings ➔ Front
display.
2.
Use the Left and Right navigation keys to adjust the
contrast for the Front Display. The results of your
adjustments appear in the display.
3.
Press
to save your new contrast setting.
Sounds Settings
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.
Volume
Use the Volume sub-menu to set the default volume for incoming
calls and alarms, or set the phone to vibrate.
1.
At the Settings menu, select Sound Settings ➔ Volume.
The following options appear in the display:
• Voice Calls — Lets you set the volume and/or vibration for the
incoming calls ringer.
• Messages — Lets you set the volume and/or vibration for the
incoming messages ringer.
• Alarms — Lets you set the volume and/or vibration for the alarm
ringer.
2. Select an option.
3.
Use the Up and Down volume keys on the left side of the
phone (or the Navigation key) to show the desired Volume
level (or vibrate mode) for the selected setting.
4.
Press
to save the setting.
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
1.
At the Settings menu, select Sound Settings ➔ Ringer
Type. The following options appear in the display:
• Voice Calls — Lets you set which ringtone, sound file, and/or one
of a set of ringtones and/or sound files plays when you receive a
voice call.
• Messages — Lets you set which ringtone or sound file plays
when you receive a Text Message, Picture/Video Message, and/or
Voicemail message.
• Roam Ringer — Lets you set which ringtone or sound file plays
when you receive calls outside your home area.
2.
Select the desired sub-menu.
• For Voice Calls and Roam Ringer, the following options appear in
the display:
– My Ringtones
– My Sounds
• For Messages, the following sub-menus appear in the display:
– Text Message
– Picture/Video Message
– Voicemail
Each of these sub-menus offer My Ringtones and My Sounds
options.
3. Select an option, or a sub-menu and an option, then Select
a ringer.
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1.
At the Settings menu, select Sound Settings ➔ Alerts.
The following Alerts sub-menus appear in the display:
• Minute Beep — Sounds an alert ten seconds before each
elapsed minute of a call.
• Roaming — Sounds an alert when you leave your home service
area.
Changing Your Settings
112
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On/Off — Plays a melody when you turn the phone on or
off.
• Charge Alert — Plays a melody when you connect the Travel
Adapter and when the battery is fully recharged.
2. Select an option, then select On or Off.
Call Settings
You can use Call Settings to select how your phone handles calls,
both voice and data calls.
Call Answer
You can select a specific answer mode when you receive an
incoming call.
Key Tone
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1.
• Select Short or Long. You are returned to the Key Tone submenu.
1.
Answer. The Call Answer sub-menu with the following
At the Settings menu, select Sound Settings ➔ Key
options appears in the display:
Tone. The following options appear in the display:
• Any Key — Press any key except, , the soft keys (
), or the Volume key to answer an incoming call.
• Send Key — Press
to answer an incoming call.
• Flip Open — Open the flip or press
to answer an incoming
call.
• Tone Level (volume)
• Tone Length
Tone Level is highlighted.
2.
Press
to adjust the Key Tone volume.
• Use the volume keys or Navigation key to set the keypad tones
volume.
• Press when the desired key beep volume setting is reached.
You are returned to the Key Tone sub-menu.
3. Use the Up and Down navigation keys to highlight Tone
Length, then press the
113
key.
At the Settings menu, select Call Settings ➔ Call
Tip: You can set your phone to answer calls automatically, without any input
from you. (See “Auto Answer” on page 114. for more information.)
2.
Select the method you wish to use for answering calls.
You’re returned to the Call Settings menu.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
Note: Auto Answer requires that you connect a wired headset or an optional
Bluetooth headset or Handsfree Car Kit to your phone.
1.
At the Settings menu, select Call Settings ➔ Auto
Answer. The following options appear in the display:
• Off — Disables automatic answering of calls
• After 1 Second — Phone automatically answers calls after 1
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
• After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Select the desired setting. You’re returned to the Call
Settings menu.
Auto Retry
Auto Retry automatically re-dials a number if the connection
fails. Depending upon your location, the number of times your
phone automatically dials the number may vary.
1.
At the Settings menu, select Call Settings ➔ Auto Retry.
The Auto Retry sub-menu with the following options
appears in the display:
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
2. Select the desired setting. You’re returned to the Call
Settings menu.
TTY Mode
Your phone is fully TTY compatible. TTY equipment is connected
to your phone through the headset connector on the left side of
the phone. TTY must be enabled before you can use your phone
with a TTY device.
1.
At the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to view/change the
current TTY Mode setting.
Note: Note: The “Enabling TTY may impair headset use and non-TTY
accessory performance” message pops up when you select TTY
Mode.
Changing Your Settings
114
2.
Press the Yes soft key to access the TTY Mode options or
2.
press the No soft key to return to the Call Settings submenu.
3.
If you press the Yes soft key, the following options appear
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY + Talk (VCO) — Enables TTY mode and microphone.
• TTY + Hear (HCO) — Enables TTY mode and earpiece.
• TTY Off — Disables TTY mode.
4. Select the desired setting. You’re returned to the Call
Settings menu.
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1.
At the Settings menu, select Call Settings ➔ Voice
Privacy. The following options appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
115
Select the desired setting. You’re returned to the Call
Settings menu.
Data Settings
Use the Data Settings menu to configure data connection
settings.
1.
At the Settings menu, select Call Settings ➔ Data
Settings.
2.
The following options appear in the display:
• Data Off — No incoming data calls accepted.
• Data For Next Call — Wait for data call for the next 10 minutes.
• Data Until Powered Off — Data calls only, no voice calls
accepted, until you power the phone off and on again.
3. Select the desired setting. You’re returned to the Call
Settings menu.
Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
1.
At the Settings menu, select Phone Settings ➔ Airplane
Mode.
The following options appear in the display:
• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
2. Select the desired setting. You are prompted to confirm
your selection.
3.
To keep your selected setting, press the Yes soft key. To
discard your selected setting, press the No soft key.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
1.
Security
Use the Security menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, as well
as other security options.
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1.
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
At the Settings menu, select Phone Settings ➔
Language. The following options appear in the display:
• English
• Español
2. Select the desired setting. You’re returned to the Phone
Settings menu.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Lock Phone. The
following Device Lock Mode options appear in the display:
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone
Changing Your Settings
116
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
3. Select the desired setting. You’re returned to the Security
sub-menu.
Change Lock
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Change Lock. You’re
3.
Enter the new lock code. You’re prompted to re-enter the
prompted to enter the new lock code.
new lock code for verification.
Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
117
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
4.
Emergency #
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1.
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Emergency #.
3.
Press
,
abc
, or
def
to select from the three
emergency number entries.
4.
Enter an emergency number (up to 32 digits in length).
5.
Press
3.
return to the Security sub-menu, press the No soft key.
Erase All Entries
Erase memory erases your Contacts. This feature is useful if you
want to give your phone to someone else.
1.
1.
In standby mode, enter the emergency number.
2.
Press
Note: The default lock code is the last four digits of your telephone number.
2.
to place the call.
Resetting Your Phone
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
to save the number that you entered.
Call Emergency Numbers in Lock Mode
To restore default settings, press the Yes soft key. To
Enter the lock code, then select Erase All Entries. You are
prompted to enter the lock code a second time.
Note: The default lock code is the last four digits of your telephone number.
Reset Phone returns all setup options to their factory defaults.
1.
At the Settings menu, select Phone Settings ➔ Security.
3.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, the select Reset Phone. A prompt
appears in the display asking if you wish to restore default
settings (except for the Contacts and Voice Dial).
Enter the lock code. You are prompted to confirm erasure
of all entries.
You’re prompted to enter the lock code.
4.
To erase all entries, press the Yes soft key. To return to the
Security sub-menu, press the No soft key.
Restriction
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
1.
At the Settings menu, select Phone Settings ➔ Security.
Changing Your Settings
118
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
System Select
The System Select menu allows you to select the roaming
setting for your phone.
1.
At the Settings menu, select Phone Settings ➔ System
2.
Enter the lock code, then select Restriction.
3.
Use the Up and Down navigation keys to highlight
Select. The following roaming options appear in the
Outgoing, Incoming, or Contacts.
display:
4.
Press
. The following options appear in the display:
• On — Restrict (block) all selected calls.
• Off — No restriction on selected calls.
5. Select On or Off. You’re returned to the Restriction submenu.
NAM Selection
NAM Selection lets you select NAM (Number Assignment Module)
settings for your phone. You can store two NAM settings, which
are essentially telephone numbers, for your phone.
1.
At the Settings menu, select Phone Settings ➔ NAM
Selection. The following options appear in the display:
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired setting. The phone powers itself off and
back on.
119
• Home only — Your phone is available for normal operation only
within your designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
2. Select the desired roaming setting. You’re returned to the
Phone Settings sub-menu.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
1.
At the Settings menu, select Phone Settings ➔ Set Time.
The following options appear in the display:
• Set Date
• Set Time
2.
Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Enter the current date using your keypad.
The month and day must be entered using two digits each. The year
must be entered using all four digits.
– Press
to save your date setting.
• For Set Time, the Set Time screen appears in the display.
– Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12/
24-hour format.
– Use the Left and Right navigation keys to select AM, PM, or 24 Hours.
– Press
to save the your time setting.
Quick Search
Searching for a Menu Item
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the Menu item name.
For example, to search for “Inbox” you would enter:
2.
ghi
mno
abc
mno
wxyz
I
N
B
O
X
Press the Down navigation key. The Menu List screen
appears in the display with the first menu item matching
your entry highlighted.
3.
Press the
key to access the content of the menu item.
Quick Search is an easy way to locate Menu items and Contacts.
1.
At the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
• On — Quick Search is enabled.
• Off — Quick Search is disabled.
2. Use the Navigation key to highlight the desired Quick
Tip: If the menu item you are searching for does not appear in the Menu List
screen, try expanding your search by pressing the CLR key to delete
the last digit of your entry.
Searching for a Contact
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the contacts name.
Search setting.
Changing Your Settings
120
For example, to search for “Sally” you would enter:
2.
pqrs
abc
S
A
jkl
L
jkl
L
wxyz
Y
Press the Up navigation key. The Find screen appears in
the display with the first contact name matching your entry
highlighted.
3.
Press
to call the contact.
Shortcut Key
The Navigation keys can be customized to launch any one of
numerous applications or functions from standby mode. Use the
Shortcut Key sub-menu to choose the application that you wish
each of the Navigation keys to launch.
1.
At the Settings menu, select Phone Settings ➔ Shortcut
2.
Select Up Key, Right Key, Down Key, or Left Key. The
Key.
following functions appear in the display, with the current
setting highlighted:
• BREW
• Browser
• New Text Msg
• New Pic Msg
• Inbox
• Contacts
• Recent Calls
• Voice Command
• My Images
• My Ringtones
• My Sounds
• My Videos
• Calendar
• Memo Pad
• Alarm Clock
• World Time
• Calculator
• Stop Watch
• Converter
• Voice Recording
• Camera
• Tip Calculator
3. Select the desired function. You’re returned to the Shortcut
Key sub-menu.
121
You can now press the changed Navigation key in standby
mode to launch the selected function.
2.
Memory Info
Memory Info lets you quickly and easily review and manage
your phone memory usage. To access Memory Info, do the
following:
1.
At the Settings menu, select Memory Info. The following
options appear in the display:
• Save Options — Lets you specify whether your images and
videos will be stored in your phone or on an optional Memory Card.
• Phone Memory — Lets you review your phone’s available
memory and manage your files stored there.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Save Options
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
1.
• Videos
Select the desired file type. The following storage options
appear in the display:
• Phone Memory — saves the selected type of files in your phone’s
memory.
• Card Memory — saves the selected type of files in a removable
microSD memory card.
3. Select the desired storage location. “Save Options set”
appears in the display, and you are returned to the Save
Options menu.
Phone Memory
Lets you review your phone’s available memory and manage your
files stored there.
Memory Usage
Memory Usage lets you review your usage of your phone’s
memory.
1.
At the Settings menu, select Memory Info ➔ Phone
At the Settings menu, select Memory Info ➔ Save
Memory ➔ Memory Usage. The Memory Usage screen
Options. The following file type options appear in the
appears in the display showing the following information:
display:
• Total memory usage
• Available unused memory
• Images
Changing Your Settings
122
• My Images memory usage
• My Videos memory usage
• My Ringtones memory usage
• My Sounds memory usage
• Applications memory usage
• Pic/Video Msg memory usage
2. Press
to return to the Phone Memory menu.
Freeing Memory
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
1.
At the Settings menu, select Memory Info ➔ Phone
Memory. The Phone Memory screen appears in the
display listing the following options:
•
•
•
•
•
123
Memory Usage
My Images
My Videos
My Ringtones
My Sounds
2.
Select the desired storage folder (My Images / Videos /
Ringtones / Sounds). A list of all files in the related folder
appears in the display.
Files are listed by name, and each file entry shows the
name and size of each file.
3.
To erase files, do the following:
• Press the Options soft key, then select Erase.
• Highlight a file you want to erase, then press to mark the file for
erasure. (Press the Mark All soft key to mark all files for erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files, or press the No soft
key to return to the Erase screen.
4. To move files to the Memory Card, do the following:
• Press the Options soft key, then select Move.
• Highlight a file you want to move, then press to mark the file for
moving. (Press the Mark All soft key to mark all files for moving.)
• Press the Done soft key. You are prompted to confirm moving the
selected file(s) to the Memory Card.
• Press the Yes soft key to move all marked files, or press the No soft
key to return to the Move screen.
5.
Press
CLR
to return to the My Images / Videos /
Ringtones / Sounds sub-menu. Press
to return to
standby mode.
Card Memory
Freeing Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
1.
Card Memory lets you review a removable, microSD Memory
Card’s available memory, manage your files stored there, and
format new microSD Memory Cards.
Memory Usage
Memory Usage lets you review your usage of your Memory
Card.
1.
At the Settings menu, select Memory Info ➔ Card
Memory ➔ Memory Usage. The Memory Usage screen
appears in the display showing the following information:
• Total memory usage
• Available unused memory
• My Images memory usage
• My Videos memory usage
• My Music memory usage
2. Press
to return to the Card Memory menu.
At the Settings menu, select Memory Info ➔ Card
Memory. The Card Memory screen appears in the display
listing the following options:
• Memory Usage
• My Images
• My Videos
• My Music
• Format Card
2. Select the desired storage folder (My Images / Videos /
Music). A list of all files in the related folder appears in the
display.
Files are listed by name, and each file entry shows the
name and size of each file.
3.
To erase Image and Video files, do the following:
• Press the Options soft key, then select Erase.
• Highlight a file you want to erase, then press to mark the file for
erasure. (Press the Mark All soft key to mark all files for erasure.)
Changing Your Settings
124
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files, or press the No soft
key to return to the Erase screen.
4. To erase Music files, do the following:
• Press the Erase soft key.
• Highlight a Music file you want to erase, then press to mark the
file for erasure. (Press the Mark All soft key to mark all Music files
for erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
5. To move image and video files to the phone, do the
following:
• Press the Options soft key, then select Move.
• Highlight a file you want to move, then press to mark the file for
moving. (Press the Mark All soft key to mark all files for moving.)
• Press the Done soft key. You are prompted to confirm moving the
selected file(s) to the phone.
• Press the Yes soft key to move all marked files, or press the No soft
key to return to the Move screen.
6. Press CLR to return to the My Images / Videos / Music
sub-menu. Press
125
to return to standby mode.
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
1.
At the Settings menu, select Memory Info ➔ Card
Memory ➔ Format Card. You are prompted to confirm
formatting of the Memory Card.
2.
Press the Yes soft key to format the Memory Card, or press
the No soft key to return to the Card Memory screen.
Phone Info
Phone Info options let you identify important information about
your phone, such as the hardware and software versions of your
phone, the meanings of your phones status icons, and the phone
number assigned to your phone.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1.
At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your Wireless
Provider appears in the display.
2.
Press
to return to the Phone Info menu.
Icon Glossary
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
1.
At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
2.
Press
to return to the Phone Info menu.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1.
At the Settings menu, select Phone Info ➔ Version.
Your phone’s hardware and software version information
appears in the display.
2.
Press
to return to the Phone Info menu.
Changing Your Settings
126
Section 15: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to safely
use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
127
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• Head: 0.721 W/Kg.
• Body-worn: 1.27 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: http://www.samsung.com/us/consumer/type/
type.do?group=mobilephones&type=mobilephones for more
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
128
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
129
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
Health and Safety Information
130
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
131
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
132
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
133
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
Health and Safety Information
134
3.
Position your wireless phone within easy reach. Be able to
7.
may be distracting. Make people you are talking with
from the road. If you get an incoming call at an
aware you are driving and suspend conversations that
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
have the potential to divert your attention from the road.
8.
if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.
or medical emergencies.
9.
Use your wireless phone to help others in emergencies. If
Do not take notes or look up phone numbers while driving.
you see an auto accident, crime in progress or other
Jotting down a "to do" list or flipping through your address
serious emergency where lives are in danger, call 9-1-1 or
book takes attention away from your primary
other local emergency number, as you would want others
responsibility, driving safely.
6.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
weather conditions. Rain, sleet, snow, ice and even heavy
5.
Do not engage in stressful or emotional conversations that
access your wireless phone without removing your eyes
Dial sensibly and assess the traffic; if possible, place calls
to do for you.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
135
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
136
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
137
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Health and Safety Information
138
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
139
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Health and Safety Information
140
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
To make an emergency call:
FCC Notice
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
141
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Health and Safety Information
142
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to “Bluetooth” on page 90.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
143
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Health and Safety Information
144
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
145
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
146
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
147
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
148
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
149
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Index
A
Airplane Mode 115
B
BACK key 13
Backup to last menu 28
Bluetooth 90
Add New Device 91
Connecting 92
Registered List 92
Settings 92
Turn On/Off 91
Browser
How Browser Keys Work 58
Launching Browser 57
Using Browser 57
Using Links 58
C
Calendar
Add a New Event 93
Review, Edit, and Erase Events 94
Call Answer mode 15
Call Functions
Adjusting the Call Volume 22
Answering a Call 22
Call Log 22
Making a Call — Number Entry
Dialing 18
Making a Call — Speed Dialing 19
Call Options
Auto Retry 114
Call Settings 113
Auto Answer 114
Call Answer 113
Data Settings 115
TTY Mode 114
Voice Privacy 115
Camcorder
Options 72
Screen Icons 64
Taking Videos 62
Video Gallery 78
Camera
Brightness 77
Color Tones 68 74
Multi Shot 66
,
Options 65
Photo Gallery 77
Save Pictures 65
Screen Icons 63
Taking Multi Shot Pictures 61
Taking Single Pictures 60
Taking Snap Shots 60
Zoom 77
Camera Key 13
Camera Options
Resolution 67
Card Memory
Formatting 125
Freeing 124
Usage Info 124
Contacts List 34
Open 34
Creating and Sending New Messages
Picture (Pic) Message 47
Text Message 46
Video Message 48
D
Display screen icons 14
150
Display Setting
Clock Format 109
Display Settings 108
Backlight 111
Banner 110
Dialing Font 110
Front Contrast 111
Menu Style 109
Theme 110
Wallpaper 109
E
Emergency Calls 18
END key 13
Entering Text
Alpha (Abc) Mode 31
Entering Numbers 32
Entering Symbols 32
Entering Upper and Lower Case
Letters 32
Text Entry Modes 30
Erase All Entry 118
Erase memos 89
Exit Browser 57
F
File Save Options 122
151
Formatting a Memory Card 125
Formatting a microSD Card 125
G
Gallery
Photo 77
Video 78
H
HAC 138
Health and Safety Information 127
I
Icon Glossary 126
Input mode 15
International Calls 18
In-use menu 28
K
Key Tone 113
L
Language 116
Launching Voice SVC 103
Left soft key 12
Lock mode 15
M
Memo Pad
Add a Memo 95
Review, Edit, and Erase Memos 95
Memory Card
Formatting 125
Menu shortcuts 29
Menu, in-use options 28
Message Folders 51
Drafts folder 54
Inbox 51
Messages and Lock Mode 53
Outbox 53
Voicemail 55
Message Send Options 50
Message Setting 56
Messaging
Erasing Messages 55
Message Settings 56
microSD
Formatting 125
Mode
Call answer 15
Input 15
Lock 15
Silent 16
Standby 16
Talk 16
M-Ratings 139
Multi shot 66
N
Navigation key 13
Navigation key shortcuts 28
Number Entry Dialing 18
O
OK key 12
P
Personal Organizer
Alarm Clock 95
Calculator 98
Calendar 92
Memo Pad 95
Voice Memo 88
World Time 97
Phone Info
Icon Glossary 126
Phone Number 125
Version 126
Phone Memory
Freeing 123
Usage Info 122
Phone Number 125
Phone Safety 137
Phone Settings
Airplane Mode 115
Language 116
NAM Selection 119
Quick Search 120
Set Time 119
Shortcut Key 121
System Select 119
Photo gallery 77
Photos
Sending 79
Picture (Pic) message 47
Q
,
Quality, pictures 67 74
Quick Search
Dialing 20
Setting 120
R
Receiving New Messages 50
While in a Call 51
Record memos 88
Resetting Your Phone 118
Return to last menu 28
Right soft key 12
Roaming 27
S
SAR values 127
Save pictures 65
Screen Layouts 63
Security Settings
Change Lock 117
Emergency # 117
Erase All Entry 118
Lock Phone 116
Resetting Your Phone 118
Restriction 118
SEND key 13
Send Pic messages 79
Set Time 119
Setings
Location 108
Settings
Call Settings 113
Display 108
Display Settings 108
Key Tone 113
Memory Info 122
Security Settings 116
Setup
Voicemail 51
152
Shortcut Key 121
Shortcut to menus 29
Shutter sound 71
Silent mode 16
Sounds Settings
Alerts 112
Key Tone 113
Ringer Type 112
Volume/Vibrate 111
Speakerphone Key 16
Speed Dialing 19
One-Touch Dialing 19
Three Touch Dialing 19
Two-Touch Dialing 19
Standard Limited Warranty 146
Standby mode 16
T
Talk mode 16
Text Conventions 4
Text message 46
Tools
Tools Menu 90
T-Ratings 139
TTY Mode 114
153
U
UL Certification 128
Understanding Your Contacts
Adding a New Contact Entry 34
Deleting a Contact Entry 44
Editing an Existing Contact Entry 40
Finding a Contact Entry 37
Memory 45
Pauses 40
Understanding Your Phone
Closed View of Your Phone 9
Command Keys 12
Display Screen 14
Features of Your Phone 9
Front View of Your Phone 10
V
Version 126
Video gallery 78
Video message 48
Voice Dialing 20
Voice Launch 106
Voice Memo 88
Erase all memos 89
Record memos 88
Review memos 88
Voice Privacy 115
Voice SVC
Launching 103
Voicemail 51
Checking 51
Setup 51
VoiceSignal
About VoiceSignal 107
Voice Memos 88
W
Warranty Information 146