Audiovox DPF711K - Digital Photo Frame Technical data

HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 1
DPF711K
smil
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 2
TABLE OF CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
homebase Refrigerator Surface Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
homebase Countertop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
homebase Wall Mount Installation Using the Wall Mount Bracket . . . . . . . . . . . . . . . . . . . . 9
homebase Wall Mount Installation Using the Angle Mount Brackets . . . . . . . . . . . . . . . . . 10
Internal Battery Activation and/or Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Controls, Indicators and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Accessory Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operating the Homebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Preliminary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Family Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Memos
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Calendar
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Photo Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 3
IMPORTANT SAFETY INSTRUCTIONS
Please read all safety and operating instructions carefully before installation, and keep these
instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Water and Moisture: The unit should not be used near water. For example: near a bathtub,
swimming pool, etc.
Ventilation: The unit should be situated so that its location or position does not interfere
with its proper ventila
Heat: The unit should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
Power Source: The unit should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
Power Cord Protection: Power cords should be routed so that they are not likely to be
walked on or pinched by items placed up or against them. It always best to have a clear
area from where the cord exits the unit to where it is plugged into an AC outlet.
Cleaning: The unit should be cleaned as needed with a soft, non-abrasive cloth.
Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not
spilled into any openings or vents located on the product.
Attachments: Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection: Disconnect the unit from AC power during any electrical storm in the immediate vacinity. This will prevent damage to the product due to lightning and power-line surges.
Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can resulting in a risk of fire or electric shock.
Damage Requiring Service: This unit should be serviced by qualified service personnel when:
a. The power supply cord or plug has been damaged.
b. Objects have fallen into or liquid has been spilled in the product enclosure.
c. The unit has been exposed to rain.
d. The unit has been dropped or the enclosure damaged.
e. The unit exhibits a marked change in performance or does not operate normally.
Servicing: The user should not attempt to service the unit beyond those methods described
in the User's Manual. Service methods not covered in the operating instructions should be
referred to qualified service personnel.
DPF711K
3
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 4
INTRODUCTION
Consider homebase your one-stop home message center and digital picture frame. The whole
family can use homebase to communicate with one another and to keep each other in the know.
Your homebase allows you to:
• Display digital photos from a number of internal or external media sources
• Record and retrieve video messages
• Record and retrieve audio messages
• Use the calendar to set audio and/or event reminders
• Display time and date
• Use a countdown timer
• Set an alarm
• Leave written messages on the unit’s whiteboard or on the Post-it® pad
• Post items such as notes, coupons or receipts to the magnetic border with the included magnets
4
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 5
PRODUCT FEATURES
Here’s Everything You Get:
• 7-inch color LCD screen for displaying photos, the calendar and clock
• 1 GB of memory
-enough for more than 125 high resolution pictures (Much more with standard pictures)
-enough for 20 minutes of video memos; 40 memos max
-enough for 30 minutes of audio memos; 40 memos max
-enough for 400 event memos
• Built-in adjustable camera for recording digital voice memos
• Built-in microphone for recording digital voice memos
• Built-in speakers with separate volume control
• Magnetic border for posting notes, coupons, receipts, etc.
• LED light that indicates a message has been left
• Erasable whiteboard and dry erase marker for quick notes and messages
• Post-it notes for lists and reminders
• Multiple mounting options for your convenience: refrigerator, wall and countertop
• Supports SD/MMC, MS, xD and CF memory cards as well as USB flash drives
• Interactive calendar and digital clock (with alarm and countdown timer)
DPF711K
5
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 6
WHAT’S IN THE BOX?
homebase
Wall Mount Bracket (1)
Angle Mount Bracket (2)
smil
AC to DC Power Adapter (1)
Post-It ® Note Pad (1)
Button Magnet (2)
Adhesive Foam Pad (2)
Wire Management System (3)
(Black, White, Clear)
Dry Erase Marker (1)
Plastic Wall Anchor (2)
Flat-Head Self-Tapping
Screw (2)
6
Double-Sided Tape (1)
Mounting Hole Template (1)
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 7
INSTALLATION
homebase Bracket Mounting Holes
Wire Post(s)
Power Adapter
Wire Notch
Refrigerator Door Front Surface
DC Input
Connector
Refrigerator
Door Seal
DC Power Wire
1 inch
Power Adapter
Wire Notches
Wire Cover
homebase
Adhesive
Foam Pads
Wire Cover
Wall Mount Bracket
Refrigerator Surface Installation
1. Remove the protective backing from one side only of the two adhesive foam pads; position them on the back of the
wall mount bracket as shown.
2. Clean the intended mounting area on the refrigerator with isopropyl alcohol.
NOTE: Do not use a glass cleaner.
3. Position the wall mount bracket where desired, making sure the top is level.
NOTE: Be sure of your location before removing the remaining protective backing from the adhesive pads,
because they are NOT designed to be removed and repositioned once applied to the refrigerator surface.
4. Remove the protective backing from the two adhesive foam pads, line up the top of the bracket, then firmly press
and hold the bracket in place to ensure that the pads adhere securely.
NOTE: 3M recommends waiting 24 hours for maximum adhesion before mounting the homebase to the wall
mount bracket.
5. Connect the power adapter plug to the DC input connector at the rear of the homebase.
6. Determine how best to route the power adapter wire in reference to the AC wall outlet – to the left or right side of
the homebase – and slip the DC wire into the corresponding wire notch on the back of the unit.
7. Check the amount of wire required to reach the AC outlet; spool any excess wire onto the four posts inside the rear
hollow of the homebase.
8. Attach the homebase to the mount bracket by lining up the homebase bracket mounting holes with the wall bracket mounting pads; slide the homebase down until the mounting tabs fully engage the mounting hole slots.
9. Cover the power adapter wire with either the clear, black or white wire cover (to match your refrigerator); seal the
cover using the double-sided tape provided, and then press into place, adhering it onto the refrigerator surface.
DPF711K
7
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 8
INSTALLATION (cont’d)
Angle Bracket Mounting Holes
homebase
Unit
DC Input Connector
Wire Post(s)
Power Adapter
Wire Notches
Bracket Upper
Mounting Tabs
Bracket Lower
Mounting Tabs
Angle Mount
Brackets
Countertop Installation
1. Find a suitable location on the countertop near an AC wall outlet.
2. Connect the power adapter plug to the DC input connector at the rear of the homebase.
3. Determine how best to route the power adapter wire in reference to the AC wall outlet – to the left
or right side of the homebase – and slip the DC wire into the corresponding wire notch on the back
of the unit.
4. Check the amount of wire required to reach the AC outlet; spool any excess wire onto the four posts
inside the rear hollow of the homebase.
5. Attach each angle mount bracket to the homebase by lining up the individual angle mount bracket
upper mounting tab with its corresponding hole on the homebase.
6. Push each angle mount bracket towards the top of the homebase until the upper mounting tab
engages the mounting hole slot; when the bottom of the angle bracket contacts the homebase, the
tab on the bottom of the angle bracket snaps into place.
7. Place the homebase in the desired location.
8
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 9
INSTALLATION (cont’d)
Flat-Head Self-Tapping
Screw (2)
Wall Surface
Drill 1/4" Hole
(2 Places)
Mounting Hole
Template
Wall Bracket
Mounting Tabs
Wall Mount
Bracket
Plastic Wall
Anchor (2) if
Needed
Wall Mount Installation Using the Wall Mount Bracket
NOTE: To mount the homebase to a wall using the adhesive pads, follow the same instructions
indicated earlier in “refrigerator surface installation” – page 7.
To mount using screws, proceed as follows:
1. Position the mounting template against the wall at the desired location; level the top of the template, and mark the position of the two upper holes onto the wall.
2. Using a 1/4” (6mm) drill bit, drill two holes where you marked the wall; if a wall stud is not present,
insert the provided plastic anchors into the holes until they are flush with the wall.
3. Align the wall bracket with the two drilled holes and/or wall anchors; insert the two flat-head
screws provided, and secure the wall bracket to the wall.
CAUTION: Do not over tighten the screws; doing so may damage the wall bracket.
4. Connect the power adapter plug to the DC input connector at the rear of the homebase.
5. Determine how best to route the power adapter wire in reference to the AC wall outlet – to the left
or right side of the homebase – and slip the DC wire into the corresponding wire notch on the back
of the unit.
6. heck the amount of wire required to reach the AC outlet; spool any excess wire onto the four posts
inside the rear hollow of the homebase.
7. Attach the homebase to the bracket by lining up the homebase bracket mounting holes with the
wall bracket mounting tabs, and slide the homebase down until the mounting tabs engage the
mounting hole slots.
8. Cover the power adapter wire with either the clear, black or white wire cover; seal the cover using
the double-sided tape provided, and then press into place, adhering it onto the wall surface.
DPF711K
9
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 10
INSTALLATION (cont’d)
Plastic Wall Anchor (2)
if Needed
Drill 1/4” Hole
(2 Places)
Angle Mount Bracket
Mounting Tabs
Wall Surface
Flat-Head Self-Tapping
Screw (2)
Angle Mount
Bracket (2)
Mounting Hole
Template
Wall Mount Installation Using the Angle Mount Brackets
NOTE: It is not recommended that you use the foam adhesive pads when mounting the angle mount brackets to a wall surface; in this case, always use screws.
1. Position the mounting template against the wall at the desired location; level the top of the template, and mark the position of the two lower holes onto the wall.
2. Using a 1/4” (6mm) drill bit, drill two holes where you marked the wall; if a wall stud is not present,
insert the provided plastic anchors into the holes until they are flush with the wall.
3. Align each angle mount bracket with its respective drilled hole and/or wall anchor; insert a flathead screw (two provided) through each wall bracket, and secure the bracket to the wall.
4. Connect the power adapter plug to the DC input connector at the rear of the homebase.
5. Determine how best to route the power adapter wire in reference to the AC wall outlet – to the left
or right side of the homebase – and slip the DC wire into the corresponding wire notch on the back
of the unit.
6. Check the amount of wire required to reach the AC outlet; spool any excess wire onto the four posts
inside the rear hollow of the homebase.
7. Attach each angle mount bracket to the homebase by lining up the individual angle mount bracket
upper mounting tab with its corresponding hole on the homebase.
8. Cover the power adapter wire with either the clear, black or white wire cover; seal the cover using
the double-sided tape provided, and then press into place, adhering it onto the wall surface.
10
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 11
INSTALLATION (cont’d)
Internal Battery Activation and/or Replacement
A type CR2032 battery is installed in a compartment behind the
front panel of the homebase. If the unit is being used for the
first time, the battery must be activated. A plastic insulator prevents contact with the battery terminals. The insulator must be
removed for the calendar/clock backup functions to operate. To
remove the insulator, simply pull out the plastic tab extending
from the right side of the unit below the marker pen.
To remove and replace the battery, proceed as follows:
1. Lay the homebase on a flat surface with the front panel facing up.
2. Grasp the center of the front panel at the top and bottom edge, and bow the panel out until it clears
the left side by the control buttons. Remove the panel to reveal the battery compartment cover.
3. With your thumb, press the cover in the direction indicated by the arrow until it disengages. Lift off
the cover.
4. Carefully remove the battery.
5. Insert the battery into the compartment, paying special attention to battery orientation (+ side
facing up).
6. Replace the battery compartment cover by first engaging the right-hand tabs in the slots; then
press down and slide the cover to the left to secure it into place.
7. Replace the front panel by engaging the right side under the protruding lip; then slightly bow the
panel out and slide the left side under the lip by the control buttons.
8. The battery backup feature should now be operational.
DPF711K
11
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 12
CONTROLS, INDICATORS AND CONNECTORS
1
5
2
6
3
7
4
8
9
13
smil
10
14
11
12
15
1. Power On/Off Switch
2. USB Connector
3. SD/MMC/MS/xD Connector
4. CF Connector
5. Up ( ) Navigation Button
6. OK / MENU Button
7. Down ( ) Navigation Button
8. MEMO Button
12
9.
10.
11.
12.
LCD Display
LED Indicator
Memo Writing Surface
Microphone, Camera,
Light Sensor
13. Speakers
14. - Volume + Control
15. DC Input Connector
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 13
ACCESSORY PLACEMENT
Note Pad Storage
Receptacle
Post-It® Note Pad
Dry Erase Marker
homebase
DPF711K
Marker Storage
Receptacle
13
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 14
OPERATING THE HOMEBASE
Preliminary Connections
Prior to initial operation, the unit must be plugged in, and the tab (“REMOVE THIS TAB”) on the right side of
the unit must be removed to enable backup battery operation.
Connecting the power
Power to the homebase is provided by the AC-to-DC wall adapter, which delivers +9VDC to the DC input connector at the rear of the unit. Refer to the installation procedures outlined previously for the methods involved
in connecting the wall adapter plug to the power input connector, and the routing and dressing of the adapter
power cable. The figure below illustrates a typical installation.
Inserting the Memory Card/USB Device
All memory devices attach at the left side of the homebase. These can include USB Flash Memory, a Compact
Flash (CF) Memory Card, a Multi-Media Card (MMC), a Memory Stick (MS) Card, a Secure Digital (SD) Card or
an xD Card. All of these devices are inserted into their respective receptacles with the label side facing the
rear of the homebase.
14
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 15
GETTING STARTED
Once homebase is properly mounted and plugged in, you are ready
to begin. If you want to use your own pictures, be sure to have your
memory card already connected.
1. Turn homebase on by moving the power switch on the left
side upward. After just a few seconds, you will see a white
welcome screen that says “audiovox homebase.”
IF YOUR MEMORY CARD IS CONNECTED… a slide show
with your pictures will automatically start.
NO MEMORY CARD IS CONNECTED…a slide show with
sample pictures will automatically start.
NOTE: If this is not the first time homebase is used, the white
welcome screen may stay on with no pictures displayed. This
is OK, as the sample pictures may have been deleted. You
may want to erase the sample pictures prior to adding your
pictures to the memory. You will learn about how to erase
pictures in detail later on.
2. Press the OK/menu button. Everything homebase does
starts here. You will see the main “menu” (“exit”,
“memo”, “calendar”, “timer”, “photo” and “settings”).
“Calendar” will automatically be highlighted in orange.
3. Try pressing the up and down arrows and watch the
orange highlighter move. This is how you will highlight
your function choices. Pressing OK/menu will take you
straight to any of these options. It’s that simple!
4. Remember, highlighting and selecting “exit” and/or
“back” will always take you back home, even if you must
do so several times. Home is the homebase screen or picture slide show.
exit
memo
memo
calendar
timer
photo
setting
Now, let’s learn more about using homebase’s many features. Please note that all instructions are provided
starting from “home”
DPF711K
15
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 16
FAMILY NAMES
Your Homebase can be customized for your family by inputting you family member names into the unit. This
will allow you to leave video and voice memos for specific family members. If there is a message waiting for
someone, their name(s) will appear on the screen indicating they have a memo.
How do I input family names?
1. Press the OK/menu button. Highlight “settings” and press OK/menu.
2. Highlight “family names” and press OK/menu. The unit already has and defaults to the
setting for “all” which can be used when there is a memo to all family members.
3. Highlight “add a new name” and press
OK/menu. A new window will open with a
flashing curser. Now press the up or down
back
arrow buttons to select the first letter of the
all
name you want to add. (Note the up arrow butadd a new name
ton starts with the letter “a” and the down
arrow button starts with the letter “z”) After
selecting the letter press OK/menu and the
cursor moves to the next letter. Repeat this
process until the name is spelled out.
4. When the name is finished press OK/menu 2
times. The name will now be added to the
“family names” menu.
back
mo_
5. Now you can enter another name or highlight
all
“back” and press OK/menu to exit.
add a new name
NOTE: If you make an error you can easily delete
the incorrect name from the family names menu
and create the name again. There is no backup
button.
How do I delete a family name?
1. Press the OK/menu button. Highlight “settings” and press OK/menu.
2. Highlight “family names” and press OK/menu.
3. Highlight the “name” you want to delete and
press OK/menu. A new menu will appear.
4. Highlight “delete” and press OK/menu.
5. Now you can enter or delete another name or
highlight “back” and press OK/menu to exit.
16
back
all
mom
add a new name
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 17
MEMOS
How do I leave a video memo?
1. Press the orange button that says memo. (This button will take you straight to the “memo” menu no
matter where you are.) You can also press the menu button then highlight “memo” and press
OK/menu. It’s up to you.
2. The “memo” menu has 5 options: “exit”, “record video”, “record voice”, “play/erase” and “erase all”.
exit
record video
record voice
play/erase
erase/all
3. Highlight “record video” and then press OK/menu.
4 The “record video > for” menu will appear. Highlight the family member you want to leave the
memo for and press OK/menu.
5. The video screen will appear. Now you can adjust the camera by moving the housing up and down
as needed. You can also adjust the brightness of the video using the the up and down arrow buttons. When you are ready to record press OK/menu.
6 The orange light will illuminate and you are now recording your video memo. Press OK/menu when
you are finished recording.
7. The “memo” menu will automatically come up (“review”, “keep/exit”, “record again” and “cancel”).
DPF711K
17
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 18
MEMOS (cont’d)
Now, what would you like to do?
To save your video memo…
Highlight “keep/exit” and then press OK/menu. Your memo is saved. The orange light in front will
stay lit and homebase will go back home.
NOTE: If one of the clock display options is active you will also see “memo(s) for:” followed by
the family members name displayed on the screen.
Thursday - Jan. 3rd, 2008
memo(s) for: all,
2:51 am
To view your video memo…
Highlight “review” and press OK/menu. View your memo again. If you like it, highlight “keep/exit” and then
press OK/menu. Your memo is saved. The orange light in front will stay lit and homebase will go back home.
To change your video memo…
Highlight “record again” and press OK/menu. Again you can adjust your settings then press OK/menu to
record your new memo and then press OK/menu to stop recording. If you are satisfied with your memo highlight “keep/exit” and press OK/menu. Your memo is saved. The orange light in front will stay lit and homebase
will go back home.
To cancel your video memo…
Highlight “cancel” and press OK/menu. You will automatically return to the “memo” screen.
8. Highlight “exit” and press OK/menu to go back home.
18
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 19
MEMOS (cont’d)
How do I leave a voice memo?
1. Press the orange button that says memo. (This button will take you straight to the “memo” menu no
matter where you are.) You can also press the menu button then highlight “memo” and press
OK/menu. It’s up to you.
2. The “memo” menu has 5 options: “exit”, “record video”, record voice “play/erase” and “erase all”.
3. Highlight “record voice ” and then press
OK/menu. The “record voice > for” will appear.
Highlight the family member you want to leave the
exit
memo for and press OK/menu. You will see the
record video
orange light come on, and you can then start
record voice
recording your memo.
play / erase
4. Press OK/menu when you are finished recording.
erase
all
5. The “memo” menu will automatically come up
(“review”, “keep/exit”, “record again” and “cancel”).
Now, what would you like to do?
To save your voice memo…
Highlight “keep/exit” and then press OK/menu. Your memo is saved. The orange light in front will stay lit
and homebase will go back home.
NOTE: If one of the clock display options is active you will also see “memo(s) for:” followed by the
family members name displayed on the screen.
To listen to your voice memo…
Highlight “review” and press OK/menu. Listen to your memo again. If you like it, highlight “keep/exit” and then
press OK/menu. Your memo is saved. The orange light in front will stay lit and homebase will go back home.
To change your memo…
Highlight “record again” and press OK/menu. Record your new memo and then press OK/menu to stop
recording. If you are satisfied with your memo highlight “keep/exit” and press OK/menu. Your memo is
saved. The orange light in front will stay lit and homebase will go back home.
To cancel your memo…
Highlight “cancel” and press OK/menu. You will automatically return to the “memo” screen.
6. Highlight “exit” and press OK/menu to go back home.
DPF711K
19
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 20
MEMOS (cont’d)
How do I listen to a voice or view a video memo?
1. Press memo.
2. Highlight “play/erase” and press OK/menu. All saved voice memos will pop up with dates and
times. Unheard memos are left in orange.
3. Highlight the memo you want to hear and press OK/menu. As you highlight the memo an icon will
appear to the right of the memo indicating what type of memo it is.
exit
all (00/00/2008
mom (00/00/200
dad (00/00200
audio
video
You will have 4 play options: “play”, “erase”, “keep”, and “keep as new”.
exit
play
all (00/00/2008
erase
mom (00/00/200
keep
dad (00/00200
keep as new
4. Highlight “play” and Press OK/menu to play the memo. When the memo finishes playing you return
to this menu.
20
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 21
MEMOS (cont’d)
Now, what do you want to do?
“play” – will play your memo again and return you to this menu.
“erase” – will erase your memo again and return you to this menu.
“keep” – will save your memo and change the color to gray indicating that it has already been heard.
“keep as new” – will save your memo and change the memo name color to orange as if it has not
been heard.
5. When finished, highlight “exit” and press OK/menu to go back home.
How do I erase a voice or video memo?
1. Press memo.
2. Highlight “play/erase” and press OK/menu. All saved voice memos will pop up with dates. New
messages will be in orange.
3. Highlight the memo you want to erase and press OK/menu.
4. Highlight “erase” and press OK/menu.
5. Highlight “exit” and press OK/menu to go back home.
How do erase all voice and video memos?
1. Press memo.
2. Highlight “play/erase” and press OK/menu. All saved voice memos will pop up with dates. New
messages will be in orange.
3. Highlight “erase all” and press OK/memo. A sub menu will appear. Highlight “yes” and press
OK/menu. All memos will be erased and the menu will display “no memo.
4. Highlight “exit” and press OK/menu to go back home.
How do I save a voice or video memo I’ve heard, but leave it highlighted as a new memo?
1.
2.
3.
4.
5.
Press memo.
Highlight “play/erase” and press OK/menu.
Highlight the memo you want to save as new and press OK/menu.
Highlight “keep as new” and press OK/menu.
Highlight “exit” and press OK/menu to go back home.
DPF711K
21
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 22
MEMOS (cont’d)
How do I listen to a voice or video memo, but not delete it?
1.
2.
3.
4.
5.
6.
7.
Press memo.
Highlight “play/erase” and press OK/menu.
Highlight the memo you want to hear and press OK/menu.
Highlight “play” and press OK/menu.
Listen to or view the memo.
When memo is finished, highlight “keep” and press OK/menu.
Highlight “exit” and press OK/menu to go back home.
How do I erase all voice and video memos?
1. Press memo.
2. Highlight “erase all” and press OK/memo. A sub menu will appear. Highlight “yes” and press
OK/menu. All memos will be erased and the menu will display “no memo. Highlight the memo
you want to hear and press OK/menu.
3. Highlight “exit” and press OK/menu to go back home.
22
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 23
CALENDAR
How do I leave a voice or video memo for a specific date?
NOTE: Dated voice memos are automatically deleted 72 hours after scheduled date.
1. Press the OK/menu button. You will see the main
“menu” (“exit”, “memo”, “calendar”, “timer”,
“photo” and “settings”). “Calendar” will automatically be highlighted in orange.
2. Press OK/menu.
3. In “Calendar”, press the up or down arrows to
change dates. Press and hold the up or down arrow
for 2 seconds, then release, to change months.
4. Highlight the desired date and press memo button.
5. Select the type of memo you want to record by highlighting “record video” or “record voice” and press
OK/menu.
6. Highlight the family member you want to leave the
memo for and press OK/menu.
7. Press OK/menu when you are finished recording.
8. The “memo” menu will automatically come up
(“review”, “keep/exit”, “record again” and “cancel”).
exit
memo
calendar
timer
photo
settings
MAY 2008
MAY 15th, 2008
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
exit
back
record video
record voice
event
DPF711K
23
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 24
CALENDAR (cont’d)
Now, what would you like to do?
To save your voice or video memo…
Highlight “keep/exit” and then press OK/menu. Your memo is saved. The orange light in front will stay lit and
homebase will go back home. Be sure to use the marker to write down to whom the memo is intended for on
the marker board under the “memo for:” light.
To listen to your voice or video memo…
Highlight “review” and press OK/menu. Listen to your memo again. If you like it, highlight “keep/exit” and
then press OK/menu. Your memo is saved. The orange light in front will stay lit and homebase will go back to
the “calendar memo” menu.
To change your voice or video memo…
Highlight “record again” and press OK/menu. Record your new memo and then press OK/menu to stop
recording. If you are satisfied with your memo highlight “keep/exit” and press OK/menu. Your memo is saved.
The orange light in front will stay lit and homebase will go back to the “calendar memo” menu.
To cancel your voice or video memo…
Highlight “cancel” and press OK/menu. You will automatically return to the “calendar memo” menu.
9. Once you select “keep/exit”, the screen will return back to the “calendar memo” menu. A small gray
box will appear on the date to indicate that your voice or video message has been saved for that date.
10. Highlight “exit” and press OK/menu to go back home.
How do I hear/view and erase… or hold onto a voice or video memo left on a specific date…
or erase all memos on all dates?
1.
2.
3.
4.
5.
6.
Press OK/menu.
Press OK/menu again.
Select day and month in “calendar”.
Highlight the desired date and press OK/menu.
Highlight “voice/video memo” and press OK/menu.
Highlight the memo you want to hear or view
and press OK/menu.
7. “Play” will automatically be highlighted.
8. Press OK/menu to hear memo. When memo is finished, 4 options will automatically pop up:
“play”, “erase”, “keep” and “keep as new”.
24
exit
play
all
erase
mom
keep
erase all
keep as new
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 25
CALENDAR (cont’d)
Now, what would you like to do?
To erase a voice or video memo…
a. Highlight “erase” and press OK/menu. Screen will automatically return to calendar
memo screen and memo will be gone from list.
b. Highlight “exit” and press OK/menu. Screen will return to calendar.
c. Press OK/menu and screen will return to calendar memo screen.
d. Highlight “exit” and press OK/menu to go back home.
To keep a voice or video memo…
a. “Keep” will automatically be highlighted; press OK/menu. Screen will automatically return to the
“calendar memo” screen.
b. Highlight “exit” and press OK/menu. Screen will return to calendar.
c. Press OK/menu and screen will return to memo screen.
d. Highlight “exit” and press OK/menu to go back home.
To erase all memos from all dates…
a. Highlight “erase all” and press OK/menu. Screen will automatically return to the calendar date with
no voice memo icons showing.
b. Highlight “yes” and press OK/menu.
c. Screen will return to the “calendar memo” menu showing “no memo”
d Highlight exit and press OK/menu and screen will return to the calendar screen.
e. Press OK/menu. Highlight “exit” and press OK/menu to go back home.
How do I leave a special event memo?
1.
2.
3.
4.
5.
6.
Press the OK/menu.
Press OK/menu again.
Select day and month in “calendar”.
Highlight the desired date and press the orange memo button.
Highlight “event” and press OK/menu.
Choose which type of special event this date
is for: “birthday”, “anniversary”, “holiday” or
“special”. Highlight accordingly and press
OK/menu.
back
birthday
anniversary
holiday
special
DPF711K
25
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 26
CALENDAR (cont’d)
Now, what do you want to do?
To make this a one-time event…
a. Leave “on” highlighted and press OK/menu. Screen will automatically return to event
selection screen. A small orange box will appear on the date to indicate that your message
has been saved for that date.
b. Highlight “back” and press OK/menu. Screen will return to the calendar screen.
c. Press OK/menu and highlight “exit” and press OK/menu again to go back home.
To mark this event on the same day every year…
a. Highlight “on every year” and press OK/menu. Screen will automatically return to the event
selection screen. A small orange box will appear on the date to indicate that your message
has been saved for that date.
b. Highlight “back” and press OK/menu. Screen will return to the calendar screen.
c. Press OK/menu and highlight “exit” and press OK/menu again to go back home.
NOTE: Now when you are in the calendar and on the day of an event the event icon(s) will appear on the
calendar telling you what are the events of that day. In addition, if one of the clock display options is active
you will also see the event icon displayed on the screen indicating that there is an event on this day.
How do I check a calendar event?
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
26
Press the OK/menu.
Press OK/menu again.
Select day and month in “calendar”.
Highlight the desired date and press OK/menu.
Highlight “event memo” and press OK/menu.
Select which event memo and press OK/menu.
An icon will appear displaying what type of
occasion it is.
Press OK/menu. “Keep” will automatically be
highlighted.
Press OK/menu to save event.
Highlight “back” and press OK/menu. Screen will
return to the calendar menu.
Highlight “exit” and press OK/menu to go back
home.
Special Event Icon
Anniversary Reminder Icon
Birthday Reminder Icon
Holiday Reminder Icon
exit
anniversary
holiday
birthday
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 27
CALENDAR (cont’d)
How do I erase a calendar event?
1.
2.
3.
4.
5.
6.
Press the OK/menu.
Press OK/menu again.
Select day and month in “calendar”.
Highlight the desired date and press OK/menu.
Highlight “event memos” and press OK/menu.
Highlight the event and press OK/menu and highlight “erase”; press OK/menu again. Screen will
return to calendar memo screen and event will be missing.
7. Highlight “back” and press OK/menu. Screen will return to calendar.
8. Highlight “back” and press OK/menu to return to the calendar or highlight “exit” and press
OK/menu to go back home.
DPF711K
27
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 28
COUNTDOWN TIMER
How do I set a countdown reminder?
1. Press OK/menu and the main “menu” will pop up.
exit
memo
calendar
timer
photo
settings
2. Highlight “timer” and press OK/menu. A split screen display appears with the countdown timer
on the left and a slide show on the right.
countdown timer
00:10:00
h
m
s
3. When the timer display appears, the hour (h) digits are flashing and “10 minutes” is indicated.
4. Use the up and down buttons to set the hours; press OK/menu.
5. The minutes digits are now flashing; use the up and down buttons to set the minutes (m); press
OK/menu.
6. The timer starts. The minutes digit decreases by 1 and the seconds (s) digits begin to countdown
from 59, initiating the countdown sequence.
7. To stop the countdown prior to “timeout”, press OK/menu.
8. In the event that the timer is allowed to run out, “time up” appears below the digits; the display
automatically returns to the slide show, and the alarm will sound for 2 minutes.
9. To shut off the alarm, press OK/menu.
28
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 29
PHOTO MENU
The homebase can accept 6 different types of memory devices SD, MMC, MS, xD and CF cards as well as a
USB flash drive. When you plug one of these devices into the appropriate receptacle the unit will go directly to
step 6 below and display the photo icons on your memory device.
NOTE: If you turn on your homebase with a memory device installed the slideshow will default to that memory
device rather then the pictures in your homebase photo library
How do I load my photos?
1. Insert your memory card in the appropriate receptacle on the side of the unit. The unit should
immediately load the “external media” library for the memory device you installed. If this is the case
go to number 6 below. If your memory device was already installed continue with number 2 below.
2. Press OK/menu and the main “menu” will pop up.
3. Highlight “photo” and press OK/menu; 4 options will then appear (“back”, “external media”,
“photo library” and “slide show”).
back
external media
photo library
slide show
4. Highlight “external media” and press OK/menu. A new menu will appear with the different memory
device listed
5. Highlight the device format name (for instance, if you have a SD card select “sd/mmc/xd/ms”) and
press OK/menu.
DPF711K
29
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 30
PHOTO MENU (cont’d)
6. All photos will automatically be displayed as thumbnails on the screen. Highlight the photo you
would like to copy by pressing the up and down arrows; when photo is selected, press OK/menu.
exit
back
copy
next
copy all
7. The photo will be displayed enlarged, followed by a menu that will automatically pop up with 5
options.
Now, what do you want to do?
To copy this photo to your photo library…
Highlight “copy” and press OK/menu. Menu will stay on screen when the copy is complete.
To copy all photos to your photo library…
Highlight “copy all” and press OK/menu. Menu will stay on the screen when the copy is complete.
To view the next photo enlarged…
Highlight “next” and press OK/menu.
To go back to thumbnail mode…
Highlight “back” and press OK/menu
8. When all desired photos are copied, highlight “exit” and press OK/menu to go back home.
NOTE: Once all desired photos are copied, the memory card can be removed and the photos will
be retained until deletion.
30
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 31
PHOTO MENU (cont’d)
What can I do with my photos once they are in the Photo Library?
1. Press OK/menu and the main “menu” will pop up.
2. Highlight “photo” and press OK/menu.
3. Highlight “photo library” and press OK/menu. All photos stored in the photo library will automatically pop up.
4. Highlight desired photo by pressing the up and down arrows; when photo is selected, press
OK/menu.
5. Photo will enlarge, followed by a menu that will automatically pop up with 6 options.
exit
back
single slide display
delete
next
rotate
DPF711K
31
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 32
PHOTO MENU (cont’d)
Now, what would you like to do?
To make this picture the only picture displayed…
Highlight “single slide show” and press OK/menu. Confirm that “on” is highlighted and press OK/menu once
more. Now that photo you selected will be displayed until you change back to the slideshow.
NOTE: Turning single slide show on will stop home screen slide show. To restore, repeat above directions, but
select “off” instead.
To rotate the photo for better viewing…
Highlight “rotate” and press OK/menu. A menu will automatically pop up. Highlight 0° to set the photo to its
original position, 90° to rotate the photo clockwise a revolution, 180° to turn the photo upside down and 270°
to turn the photo clockwise a revolution. Press OK/menu when desired position is highlighted.
To view next photo in photo library…
Highlight “next” and press OK/menu.
To go back to thumbnail mode…
Highlight “back” and press OK/menu.
To delete photo…
Highlight “delete” and press OK/menu. Highlight “yes” and press OK/menu.
To delete all photos in photo library…
Highlight “delete” and press OK/menu. Highlight “all” and press OK/menu.
6. Highlight “back” and press OK/menu to go back to the photo icon library.
Or
7. Highlight “exit” and press OK/menu to go back home.
exit
back
single slide display
delete
next
rotate
32
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 33
GENERAL SETTINGS (cont’d)
How can I change the way the slide show plays?
1. Press OK/menu and the main “menu” will pop up.
2. Highlight “photo” and press OK/menu.
3. Highlight “slide show” and press OK/menu; a menu will automatically pop up giving you 4 options.
Now, what do you want to do?
To enable the slide show…
Highlight “enable slide show” and press OK/menu. Highlight “on” and press OK/menu.
To have the slide show play photos in order…
Highlight “slide show order” and press OK/menu. Highlight “sequential on” and press OK/menu.
To have the slide show play photos randomly…
Highlight “slide show order” and press OK/menu. Highlight “random on” and press OK/menu.
To set the time duration each photo will be displayed in the slide show…
Highlight “slide show time” and press OK/menu. Highlight length of time that is desired (5, 10 or 30 seconds)
and press OK/menu.
back
5 sec
slide show order
10 sec
slide show time
30 sec
enable slide show
4. Highlight “back” and press OK/menu.
5. Highlight “exit” and press OK/menu to go back home.
DPF711K
33
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 34
GENERAL SETTINGS
How can I choose between normal or widescreen for my photos?
1. Press OK/menu and the main “menu” will pop up.
2. Highlight “settings” and press OK/menu.
3. Highlight “general setup” and press OK/menu.
exit
general setup
time/date setup
alarm
clock display
family names
4. Highlight “photo mode” and press OK/menu.
5. Highlight “normal” or “widescreen” and press OK/menu. After selection, the unit will go back home.
How can I pick a time for homebase to turn on and off each day?
Your Homebase has a built in light sensor that will automatically turn off the display 2 minutes after the room
goes dark. It will come back on automatically when the room is illuminated again. You can also set your
homebase to turn on and off each day at specific times.
1. Press OK/menu and the main “menu” will pop up.
2. Highlight “settings” and press OK/menu.
3. Highlight “general setup” and press OK/menu.
4. Highlight “activation time” and press OK/menu.
5. Highlight “enable/disable” and press OK/menu. Highlight “enable” and press OK/menu.
6. Highlight “set turn on time” and press OK/menu.
7. Use the up and down arrows to set desired hour, then press OK/menu.
Repeat for minutes and AM/PM. Press OK/menu.
8. Highlight “set turn off time” and press OK/menu.
9. Use the up and down arrows to set desired hour, then press OK/menu.
10. Highlight “back” and press OK/menu.
11. Highlight “exit” and press OK/menu to go back home.
34
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 35
GENERAL SETTINGS (cont’d)
How can I clear all data stored in memory?
NOTE: This will permanently delete ALL stored photos, voice and video memos, events, times and alarms.
1. Press OK/menu and the main “menu” will pop up.
2. Highlight “settings” and press OK/menu.
3. Highlight “general setup” and press OK/menu.
4. Highlight “clear memory” and press OK/menu.
5. Homebase will clear all data and restart.
NOTE: If a memory card is still installed, then auto slide show will resume; if no memory
card is installed, then homebase screen will be displayed.
How can I restore homebase to its factory settings?
1.
2.
3.
4.
5.
6.
7.
Press OK/menu and the main “menu” will pop up.
Highlight “settings” and press OK/menu.
Highlight “general setup” and press OK/menu.
Highlight “default” and press OK/menu. Previous menu will pop up.
Highlight “yes” and press OK/menu.
Highlight “back” and press OK/menu.
Highlight “exit” and press OK/menu to go back home.
How do I set the time?
1. Press OK/menu and the main “menu” will pop up.
2. Highlight “settings” and press OK/menu.
3. Highlight “time/date setup” and press OK/menu.
4. The time/date display appears with the hour digits flashing. Use the up and down arrows to set the
hour and press OK/menu. Repeat for minutes, and press OK/menu.
5. Repeat once more for AM/PM indication, and press OK/menu.
6. Above the time is the date line. The month is now flashing. Use the up and down arrows to select
the month, and press OK/menu.
DPF711K
35
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 36
GENERAL SETTINGS (cont’d)
7. Repeat to select the numerical day of the month, and press OK/menu.
Note: When this is done correctly, the clock will automatically select the proper day
name for the date entered.
8. The year is now flashing. Use the up and down arrows to select the proper year, and
then press OK/menu.
9. Time and date setup is now complete, and the screen will return to the “settings”
menu automatically.
10. Highlight “exit” and press OK/menu to go back home.
How do I set the alarm?
1.
2.
3.
4.
Press OK/menu and the main “menu” will pop up.
Highlight “settings” and press OK/menu.
Highlight “alarm” and press OK/menu.
Highlight “alarm set” and press OK/menu.
5. A clock is displayed with the hours flashing. Use the up and down arrows to select the
desired hour, and then press OK/menu. Repeat for minutes, and press OK/menu.
6. Repeat again for AM/PM indication, and then press OK/menu.
36
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 37
GENERAL SETTINGS (cont’d)
Now, what do you want to do?
To turn alarm on…
exit
exit
on
alarm on/off
alarm on/off
on every day
alarm set
alarm set
off
1. Highlight “alarm on/off” and press OK/menu.
2 You can now set an alarm for today only by highlighting “on” and pressing OK/menu or you can set
the alarm to activate everyday at this time by highlighting “on everyday” and pressing OK/menu.
To turn alarm off…
1. Highlight “alarm on/off” and press OK/menu.
2. Highlight “off” and press OK/menu.
3. Highlight “back” and press OK/menu.
4. Highlight “exit” and press OK/menu to go back home.
NOTE: If the alarm is set correctly, a small clock icon will appear on all time display screens.
DPF711K
37
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 38
GENERAL SETTINGS (cont’d)
How do I change where the time is displayed?
1. Press OK/menu and the main “menu” pops up.
2. Highlight “settings” and press OK/menu.
3. Highlight “clock display” and press OK/menu.
exit
general setup
time/date setup
alarm
clock display
family names
Wednesday - Dec.. 17th
17th,, 2008
4. Highlight desired position from list (“off”,
“screen bottom edge”, “large centered” and
“split screen”), and then press OK/menu.
11:23 am
Clock icon
displayed on bottom of screen
Wednesday - Dec. 17th, 2008
am
exit
off
general setup
screen bottom edge
time/date setup
large centered
alarm
split screen
clock display
family names
10:00
Clock icon
displayed in center of screen
Clock icon
displayed at left in split screen
configuration
38
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 39
GENERAL SETTINGS (cont’d)
How do I select my language?
1.
2.
3.
4.
5.
6.
Press OK/menu and the main “menu” pops up.
Highlight “settings” and press OK/menu.
Highlight “general setup” and press OK/menu.
Highlight “language select” and press OK/menu.
Highlight “english” or “french” and press OK/menu.
Press OK/menu
exit
back
memo
general setup
english
memo
time / date setup
french
alarm
clock display
language select
DPF711K
39
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 40
TECHNICAL DATA
Specifications
40
• Digital Picture Frame
7” LCD
• Aspect Ratio
16:9
• Resolution:
480 x 234 pixels
• Internal Flash Memory
1 GB
• USB Connector
Provides interface for external USB memory device
• SD/MMC/MS/xD Card Slot
Provides interface for memory device
• CF Connector
Provides interface for CF memory device
• Date/Time
Digital Calendar and Clock Feature
• Video Messages
Internal camera for video recording
• Voice Messages
Internal microphone for digital audio recording
• Audio Output
Internal speakers (2) with separate volume control
• Menu Navigation
3 keys
• Message Indicator
Orange LED
• Reminder Function
The memo LED will light when there is an unheard voice
or video memo or an activated calendar voice or video
memo
• Memory Backup for the Clock
Internal backup battery data Info …..etc. Battery type
CR2032
• Image File Type Handling
JPEG
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 41
NOTES
DPF711K
41
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 42
NOTES
42
DPF711K
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 43
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that
should this product or any part thereof, under normal use and conditions, be proven defective in material or
workmanship within ninety (90) days from the date of original purchase, such defect(s) will be repaired or
replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. A game
controller, if supplied, is similarly warranted for ninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of
warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at
the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to digital
memory/media devices, gaming devices, discs, speakers, accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered
or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by
removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN
NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty
gives you specific legal rights and you may also have other rights which vary from state to state
Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 • 1-800-645-4994
128-5556G
DPF711K
43
HB-711-OM-128-8270-Eng.qxp
6/5/08
9:37 AM
Page 44
Audiovox Electronics Corp.
150 Marcus Boulevard
Hauppauge, NY 11788
128-8270
DPF711K