Understanding Your M7
Wireless Audio 를 어떻게 사용 할까요?
Android
iOS
Wireless Audio - Multiroom
How you can enjoy your M7
• Stream music through Internet radio, music services, or from the cloud.
• Play music through a Wi-Fi connection from your smart device.
• Play music from your phone, PC, or smart devices via Bluetooth.
• Use the TV SoundConnect function to play sound from your Samsung TV.
• If you have connected a HUB, you can configure multiple M7s in a Multi-room set-up with Internet radio,
music services, and Samsung Link.
——
Note that Bluetooth and TV SoundConnect are not configured for Multi-room set-ups.
M7
Streaming music services
QR code
| Quick Setup Guide |
QR code
더 자세한 설명은 Web 매뉴얼을 이용하세요.
• Web manual : www.Samsung.com ; Support ;
Product name search : WAM750/WAM751 ; PDF file download.
You can play music in devices
connected to your local network
using App’s Devices menu.
You can play music
from your smart devices
through the M7 using a
Wi-Fi connection.
Enable the Bluetooth function
of the smart device and the
[Samsung] M7 will appear on
the device list.
WAM750 / WAM751
You can listen to the sound from
your Samsung TV through the M7 by
using the SoundConnect function.
AH68-02665A-03
Accessories
Top Panel
Rear Panel
Connecting the Power Cable
SPK ADD
WPS /
Wi-Fi SETUP
AUX IN
Confirm you have the supplied accessories shown below.
SERVICE
ETHERNET
SPK ADD
Wireless Audio-Multiroom
M7
Power cord
(WAM750 : 3903-000910
WAM751 : 3903-000911)
Cover-Stand
(WAM750 : AH96-02695A
WAM751 : AH96-02695B)
Rear
Cover
open
Toroidal ferrite core
(3301-000144)
SPK ADD
WPS /
Wi-Fi SETUP
Quick Setup Guide
(AH68-02665A)
AUX IN
SERVICE
Getting Started
(AH68-02665D)
NFC Tag
Internet Radio Preset
Button
Bluetooth Button
Before you begin
• Communication Basics
■■
■■
Smart Device:
Android or iOS
(App Control)
Internet
■■
■■
Wireless Router
1. Requirements: Wireless Router, Smart Device
2. The wireless router should be connected to the Internet.
3. The smart device should be connected to the router via a
Wi-Fi connection.
[WAM750,WAM751-ZA-QSG]AH68-02665A-03ENG.indd 1
■■
Mute Button
ress and hold the Mute button for more than 5 seconds to place
P
the M7 into Sleep Mode.
ress and hold the TV SoundConnect button for more than 5
P
seconds to reset TV SoundConnect and connect a new TV.
ou can listen to radio stations by pressing the Internet Radio
Y
Preset button on the top panel of the M7. Each time you press the
button, the M7 changes the station.
SERVICE
ETHERNET
POWER
AUX IN
Insert the power cable through the
rear cover hole into the M7 power port.
SERVICE
ETHERNET
POWER
AUX IN
WPS/Wi-Fi SETUP button
ETHERNET
Volume Control
TV SoundConnect
Button
When you turn on the M7, touch buttons appear on its top panel.
SPK ADD button
POWER
WPS /
Wi-Fi SETUP
——
When completing network setup, close the rear cover.
POWER
■■
SPK ADD Button: Press for 1 second to pair your M7 with a HUB.
■■
WPS/Wi-Fi SETUP Button:
——
Press for 1 second to connect the M7 to your wireless router using
WPS.
——
Press and hold down for more than 5 seconds until you hear a fast,
3 note beep to connect the M7 to your network through your
smart device using the Wi-Fi Setup method.
L ooping the power cable around
the toroidal ferrite core
Enable your smart device’s Bluetooth by touching it to the
NFC Tag on the top panel of the M7. (Android only)
■■
I t is better to attach Toroidal ferrite cores at each end of the cable,
one close to the wall plug and another close to the terminal where it
connects to the M7.
2014-05-13 오후 8:21:32
Install
Step 1
•
Step 2
Case 1: With a HUB (Pairing the M7(s) to a HUB.)
• Pairing/Connecting is OK
Plug In
Plug In
A
HUB
HUB
Please wait a few minutes until the M7's LED indicator stops
flashing. (Since the beeping is generated during the pairing
process, wait a moment until a melody is heard.)
• Android
HUB
HUB
Wireless Router
• You can connect the LAN cable to any
Market search :
Samsung Multiroom
• The LED indicator (A) flashes.
ETHERNET SWITCH port of the HUB
ANDROID APP ON
If it does not flash, press the
SPK ADD button on the HUB’s
rear panel for 1 second.
VOLUME
VOLUME
NFC
Tag here
OK
BEEP
•
To use the M7, download and then install the Samsung
Multiroom App by tagging the NFC/QR code below or by
accessing the app through Google play or the App Store.
VOLUME
LAN
M7
Step 3
MELODY
Case 2: Without a HUB (Connecting the M7 to your router using the WPS Method.)
■■
The method used to establish a WPS connection depends on the wireless router being used.
WPS connection may not be supported by your router. Check the user manual of the wireless router.
WPS button
——
QR code
Pairing is complete when the M7's LED indicator stops flashing
and turns solid blue, and you hear a melody. Go to STEP 3.
■■
Do not attach the NFC sticker on a metallic surface.
Metallic object may interfere with communication
and the NFC sticker may not work properly.
WPS /
Wi-Fi SETUP
WPS/Wi-Fi SETUP button
• iOS
Pairing/Connecting has failed.
Plug In
WPS /
Wi-Fi SETUP
ANDROID APP ON
Market search :
Samsung Multiroom
VOLUME
M7
1 Second
Wireless Router
The shape of the WPS button or icon that
denotes, it may look different depending on
the manufacturer. ( or )
■■
■■
•
•
VOLUME
BEEP
——
App을 실행 ; I don't have a Hub ; WPS/Wi-Fi SETUP ; App 설명에 따라 단계를 진행 해주세요
(더 자세한 설명은 WiFi Guide를 확인하거나, web 매뉴얼을 참조하세요.)
QR code
NG
I f connection is not made within about two minutes of pressing the WPS button, try again by pressing the WPS buttons on your wireless router
and speaker.
If you don't have HUB or cannot find the WPS button on the wireless router, try to establish a wired connection or proceed with Wi-Fi setup after
referring to the web manual or to the M7 App Guide.
Case 2-1 : W
PS 버튼이없는 라우터 연결하기
VOLUME
Accessing the Samsung Multiroom App
I f the M7's LED indicator turns red, it means pairing/connecting has
failed.
Multiroom
2. Press the SPK ADD button on the rear of the M7.
The M7 beeps and the M7's LED indicator flashes to indicate
that the M7 has switched to pairing mode.
Wait until the M7's LED indicator turns solid blue.
Case 3 : Connecting the M7 to Your Network with a LAN Cable (For a Single M7)
Plug In
VOLUME
ETHERNET
VOLUME
M7 back
Samsung
1. Press the SPK ADD button on the rear of the HUB.
) flashes.
The HUB's LED indicator (
Wireless Router
Control the M7 with your Smart Device and the Samsung Multiroom App.
After you download the Multiroom app,
installation and set-up runs automatically.
After installing the app, pop-up screen appears.
Select App Tutorial, and then follow the directions on
your smart device’s screen.
Appendix - Adding a New M7 or HUB
• Add an M7 after performing "Case 1" procedures
HUB back
M7
NEW
[WAM750,WAM751-ZA-QSG]AH68-02665A-03ENG.indd 2
• Connecting the Cover-Stand
• Add an M7 and a HUB after performing "Case 2" procedures
Plug In
Go to
Step 2
above.
NEW
NEW HUB
a LAN b POWER
Plug In
M7 back
ORIGINAL
• Removing the Cover-Stand
Go to
Step 2
above.
Remove the M7’s rear cover before
Insert the Cover-Stand into slot A
inserting the Cover-Stand into the M7.
of the M7.
Insert the power cable into the Cover-Stand.
With the Cover-Stand inserted into
slot A insert the other side into slot B.
Then, press the area indicated
by the arrow with force.
Apply force in the direction of the
arrow while pushing the coverstand’s handle outwards.
2014-05-13 오후 8:21:36